summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/input/evdev.c7
-rw-r--r--drivers/input/keyboard/Kconfig2
-rw-r--r--drivers/input/keyboard/atkbd.c97
-rw-r--r--drivers/input/keyboard/tca6416-keypad.c2
-rw-r--r--drivers/input/misc/Kconfig11
-rw-r--r--drivers/input/misc/Makefile1
-rw-r--r--drivers/input/misc/gp2ap002a00f.c281
-rw-r--r--drivers/input/serio/i8042-x86ia64io.h12
-rw-r--r--drivers/input/serio/i8042.c3
-rw-r--r--drivers/input/touchscreen/Kconfig12
-rw-r--r--drivers/input/touchscreen/Makefile1
-rw-r--r--drivers/input/touchscreen/cy8ctma140.c353
-rw-r--r--drivers/input/touchscreen/edt-ft5x06.c198
-rw-r--r--drivers/input/touchscreen/elants_i2c.c1
-rw-r--r--drivers/input/touchscreen/goodix.c608
-rw-r--r--drivers/input/touchscreen/mms114.c17
-rw-r--r--drivers/input/touchscreen/of_touchscreen.c35
17 files changed, 1176 insertions, 465 deletions
diff --git a/drivers/input/evdev.c b/drivers/input/evdev.c
index cb6e3a5f509c..84ea84b27a28 100644
--- a/drivers/input/evdev.c
+++ b/drivers/input/evdev.c
@@ -282,7 +282,8 @@ static void evdev_pass_values(struct evdev_client *client,
spin_unlock(&client->buffer_lock);
if (wakeup)
- wake_up_interruptible(&evdev->wait);
+ wake_up_interruptible_poll(&evdev->wait,
+ EPOLLIN | EPOLLOUT | EPOLLRDNORM | EPOLLWRNORM);
}
/*
@@ -443,7 +444,7 @@ static void evdev_hangup(struct evdev *evdev)
kill_fasync(&client->fasync, SIGIO, POLL_HUP);
spin_unlock(&evdev->client_lock);
- wake_up_interruptible(&evdev->wait);
+ wake_up_interruptible_poll(&evdev->wait, EPOLLHUP | EPOLLERR);
}
static int evdev_release(struct inode *inode, struct file *file)
@@ -955,7 +956,7 @@ static int evdev_revoke(struct evdev *evdev, struct evdev_client *client,
client->revoked = true;
evdev_ungrab(evdev, client);
input_flush_device(&evdev->handle, file);
- wake_up_interruptible(&evdev->wait);
+ wake_up_interruptible_poll(&evdev->wait, EPOLLHUP | EPOLLERR);
return 0;
}
diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
index 4706ff09f0e8..f6c356e579c5 100644
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -691,7 +691,7 @@ config KEYBOARD_SPEAR
Say Y here if you want to use the SPEAR keyboard.
To compile this driver as a module, choose M here: the
- module will be called spear-keboard.
+ module will be called spear-keyboard.
config KEYBOARD_TC3589X
tristate "TC3589X Keypad support"
diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c
index 7e3eae54c192..6ec28265771d 100644
--- a/drivers/input/keyboard/atkbd.c
+++ b/drivers/input/keyboard/atkbd.c
@@ -24,6 +24,7 @@
#include <linux/libps2.h>
#include <linux/mutex.h>
#include <linux/dmi.h>
+#include <linux/property.h>
#define DRIVER_DESC "AT and PS/2 keyboard driver"
@@ -63,6 +64,11 @@ static bool atkbd_terminal;
module_param_named(terminal, atkbd_terminal, bool, 0);
MODULE_PARM_DESC(terminal, "Enable break codes on an IBM Terminal keyboard connected via AT/PS2");
+#define MAX_FUNCTION_ROW_KEYS 24
+
+#define SCANCODE(keymap) ((keymap >> 16) & 0xFFFF)
+#define KEYCODE(keymap) (keymap & 0xFFFF)
+
/*
* Scancode to keycode tables. These are just the default setting, and
* are loadable via a userland utility.
@@ -230,6 +236,9 @@ struct atkbd {
/* Serializes reconnect(), attr->set() and event work */
struct mutex mutex;
+
+ u32 function_row_physmap[MAX_FUNCTION_ROW_KEYS];
+ int num_function_row_keys;
};
/*
@@ -283,6 +292,7 @@ static struct device_attribute atkbd_attr_##_name = \
__ATTR(_name, S_IRUGO, atkbd_do_show_##_name, NULL);
ATKBD_DEFINE_RO_ATTR(err_count);
+ATKBD_DEFINE_RO_ATTR(function_row_physmap);
static struct attribute *atkbd_attributes[] = {
&atkbd_attr_extra.attr,
@@ -292,11 +302,42 @@ static struct attribute *atkbd_attributes[] = {
&atkbd_attr_softrepeat.attr,
&atkbd_attr_softraw.attr,
&atkbd_attr_err_count.attr,
+ &atkbd_attr_function_row_physmap.attr,
NULL
};
+static ssize_t atkbd_show_function_row_physmap(struct atkbd *atkbd, char *buf)
+{
+ ssize_t size = 0;
+ int i;
+
+ if (!atkbd->num_function_row_keys)
+ return 0;
+
+ for (i = 0; i < atkbd->num_function_row_keys; i++)
+ size += scnprintf(buf + size, PAGE_SIZE - size, "%02X ",
+ atkbd->function_row_physmap[i]);
+ size += scnprintf(buf + size, PAGE_SIZE - size, "\n");
+ return size;
+}
+
+static umode_t atkbd_attr_is_visible(struct kobject *kobj,
+ struct attribute *attr, int i)
+{
+ struct device *dev = container_of(kobj, struct device, kobj);
+ struct serio *serio = to_serio_port(dev);
+ struct atkbd *atkbd = serio_get_drvdata(serio);
+
+ if (attr == &atkbd_attr_function_row_physmap.attr &&
+ !atkbd->num_function_row_keys)
+ return 0;
+
+ return attr->mode;
+}
+
static struct attribute_group atkbd_attribute_group = {
.attrs = atkbd_attributes,
+ .is_visible = atkbd_attr_is_visible,
};
static const unsigned int xl_table[] = {
@@ -994,6 +1035,39 @@ static unsigned int atkbd_oqo_01plus_scancode_fixup(struct atkbd *atkbd,
return code;
}
+static int atkbd_get_keymap_from_fwnode(struct atkbd *atkbd)
+{
+ struct device *dev = &atkbd->ps2dev.serio->dev;
+ int i, n;
+ u32 *ptr;
+ u16 scancode, keycode;
+
+ /* Parse "linux,keymap" property */
+ n = device_property_count_u32(dev, "linux,keymap");
+ if (n <= 0 || n > ATKBD_KEYMAP_SIZE)
+ return -ENXIO;
+
+ ptr = kcalloc(n, sizeof(u32), GFP_KERNEL);
+ if (!ptr)
+ return -ENOMEM;
+
+ if (device_property_read_u32_array(dev, "linux,keymap", ptr, n)) {
+ dev_err(dev, "problem parsing FW keymap property\n");
+ kfree(ptr);
+ return -EINVAL;
+ }
+
+ memset(atkbd->keycode, 0, sizeof(atkbd->keycode));
+ for (i = 0; i < n; i++) {
+ scancode = SCANCODE(ptr[i]);
+ keycode = KEYCODE(ptr[i]);
+ atkbd->keycode[scancode] = keycode;
+ }
+
+ kfree(ptr);
+ return 0;
+}
+
/*
* atkbd_set_keycode_table() initializes keyboard's keycode table
* according to the selected scancode set
@@ -1001,13 +1075,16 @@ static unsigned int atkbd_oqo_01plus_scancode_fixup(struct atkbd *atkbd,
static void atkbd_set_keycode_table(struct atkbd *atkbd)
{
+ struct device *dev = &atkbd->ps2dev.serio->dev;
unsigned int scancode;
int i, j;
memset(atkbd->keycode, 0, sizeof(atkbd->keycode));
bitmap_zero(atkbd->force_release_mask, ATKBD_KEYMAP_SIZE);
- if (atkbd->translated) {
+ if (!atkbd_get_keymap_from_fwnode(atkbd)) {
+ dev_dbg(dev, "Using FW keymap\n");
+ } else if (atkbd->translated) {
for (i = 0; i < 128; i++) {
scancode = atkbd_unxlate_table[i];
atkbd->keycode[i] = atkbd_set2_keycode[scancode];
@@ -1121,6 +1198,22 @@ static void atkbd_set_device_attrs(struct atkbd *atkbd)
}
}
+static void atkbd_parse_fwnode_data(struct serio *serio)
+{
+ struct atkbd *atkbd = serio_get_drvdata(serio);
+ struct device *dev = &serio->dev;
+ int n;
+
+ /* Parse "function-row-physmap" property */
+ n = device_property_count_u32(dev, "function-row-physmap");
+ if (n > 0 && n <= MAX_FUNCTION_ROW_KEYS &&
+ !device_property_read_u32_array(dev, "function-row-physmap",
+ atkbd->function_row_physmap, n)) {
+ atkbd->num_function_row_keys = n;
+ dev_dbg(dev, "FW reported %d function-row key locations\n", n);
+ }
+}
+
/*
* atkbd_connect() is called when the serio module finds an interface
* that isn't handled yet by an appropriate device driver. We check if
@@ -1184,6 +1277,8 @@ static int atkbd_connect(struct serio *serio, struct serio_driver *drv)
atkbd->id = 0xab00;
}
+ atkbd_parse_fwnode_data(serio);
+
atkbd_set_keycode_table(atkbd);
atkbd_set_device_attrs(atkbd);
diff --git a/drivers/input/keyboard/tca6416-keypad.c b/drivers/input/keyboard/tca6416-keypad.c
index 21758767ccf0..9b0f9665dcb0 100644
--- a/drivers/input/keyboard/tca6416-keypad.c
+++ b/drivers/input/keyboard/tca6416-keypad.c
@@ -374,5 +374,5 @@ static void __exit tca6416_keypad_exit(void)
module_exit(tca6416_keypad_exit);
MODULE_AUTHOR("Sriramakrishnan <srk@ti.com>");
-MODULE_DESCRIPTION("Keypad driver over tca6146 IO expander");
+MODULE_DESCRIPTION("Keypad driver over tca6416 IO expander");
MODULE_LICENSE("GPL");
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index 7e2e658d551c..293e55fb7a4e 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -265,17 +265,6 @@ config INPUT_APANEL
To compile this driver as a module, choose M here: the module will
be called apanel.
-config INPUT_GP2A
- tristate "Sharp GP2AP002A00F I2C Proximity/Opto sensor driver"
- depends on I2C
- depends on GPIOLIB || COMPILE_TEST
- help
- Say Y here if you have a Sharp GP2AP002A00F proximity/als combo-chip
- hooked to an I2C bus.
-
- To compile this driver as a module, choose M here: the
- module will be called gp2ap002a00f.
-
config INPUT_GPIO_BEEPER
tristate "Generic GPIO Beeper support"
depends on GPIOLIB || COMPILE_TEST
diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
index 8fd187f314bd..1db1815ce803 100644
--- a/drivers/input/misc/Makefile
+++ b/drivers/input/misc/Makefile
@@ -33,7 +33,6 @@ obj-$(CONFIG_INPUT_E3X0_BUTTON) += e3x0-button.o
obj-$(CONFIG_INPUT_DRV260X_HAPTICS) += drv260x.o
obj-$(CONFIG_INPUT_DRV2665_HAPTICS) += drv2665.o
obj-$(CONFIG_INPUT_DRV2667_HAPTICS) += drv2667.o
-obj-$(CONFIG_INPUT_GP2A) += gp2ap002a00f.o
obj-$(CONFIG_INPUT_GPIO_BEEPER) += gpio-beeper.o
obj-$(CONFIG_INPUT_GPIO_DECODER) += gpio_decoder.o
obj-$(CONFIG_INPUT_GPIO_VIBRA) += gpio-vibra.o
diff --git a/drivers/input/misc/gp2ap002a00f.c b/drivers/input/misc/gp2ap002a00f.c
deleted file mode 100644
index 90abda8eea67..000000000000
--- a/drivers/input/misc/gp2ap002a00f.c
+++ /dev/null
@@ -1,281 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2011 Sony Ericsson Mobile Communications Inc.
- *
- * Author: Courtney Cavin <courtney.cavin@sonyericsson.com>
- * Prepared for up-stream by: Oskar Andero <oskar.andero@sonyericsson.com>
- */
-
-#include <linux/i2c.h>
-#include <linux/irq.h>
-#include <linux/slab.h>
-#include <linux/input.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/gpio.h>
-#include <linux/delay.h>
-#include <linux/input/gp2ap002a00f.h>
-
-struct gp2a_data {
- struct input_dev *input;
- const struct gp2a_platform_data *pdata;
- struct i2c_client *i2c_client;
-};
-
-enum gp2a_addr {
- GP2A_ADDR_PROX = 0x0,
- GP2A_ADDR_GAIN = 0x1,
- GP2A_ADDR_HYS = 0x2,
- GP2A_ADDR_CYCLE = 0x3,
- GP2A_ADDR_OPMOD = 0x4,
- GP2A_ADDR_CON = 0x6
-};
-
-enum gp2a_controls {
- /* Software Shutdown control: 0 = shutdown, 1 = normal operation */
- GP2A_CTRL_SSD = 0x01
-};
-
-static int gp2a_report(struct gp2a_data *dt)
-{
- int vo = gpio_get_value(dt->pdata->vout_gpio);
-
- input_report_switch(dt->input, SW_FRONT_PROXIMITY, !vo);
- input_sync(dt->input);
-
- return 0;
-}
-
-static irqreturn_t gp2a_irq(int irq, void *handle)
-{
- struct gp2a_data *dt = handle;
-
- gp2a_report(dt);
-
- return IRQ_HANDLED;
-}
-
-static int gp2a_enable(struct gp2a_data *dt)
-{
- return i2c_smbus_write_byte_data(dt->i2c_client, GP2A_ADDR_OPMOD,
- GP2A_CTRL_SSD);
-}
-
-static int gp2a_disable(struct gp2a_data *dt)
-{
- return i2c_smbus_write_byte_data(dt->i2c_client, GP2A_ADDR_OPMOD,
- 0x00);
-}
-
-static int gp2a_device_open(struct input_dev *dev)
-{
- struct gp2a_data *dt = input_get_drvdata(dev);
- int error;
-
- error = gp2a_enable(dt);
- if (error < 0) {
- dev_err(&dt->i2c_client->dev,
- "unable to activate, err %d\n", error);
- return error;
- }
-
- gp2a_report(dt);
-
- return 0;
-}
-
-static void gp2a_device_close(struct input_dev *dev)
-{
- struct gp2a_data *dt = input_get_drvdata(dev);
- int error;
-
- error = gp2a_disable(dt);
- if (error < 0)
- dev_err(&dt->i2c_client->dev,
- "unable to deactivate, err %d\n", error);
-}
-
-static int gp2a_initialize(struct gp2a_data *dt)
-{
- int error;
-
- error = i2c_smbus_write_byte_data(dt->i2c_client, GP2A_ADDR_GAIN,
- 0x08);
- if (error < 0)
- return error;
-
- error = i2c_smbus_write_byte_data(dt->i2c_client, GP2A_ADDR_HYS,
- 0xc2);
- if (error < 0)
- return error;
-
- error = i2c_smbus_write_byte_data(dt->i2c_client, GP2A_ADDR_CYCLE,
- 0x04);
- if (error < 0)
- return error;
-
- error = gp2a_disable(dt);
-
- return error;
-}
-
-static int gp2a_probe(struct i2c_client *client,
- const struct i2c_device_id *id)
-{
- const struct gp2a_platform_data *pdata = dev_get_platdata(&client->dev);
- struct gp2a_data *dt;
- int error;
-
- if (!pdata)
- return -EINVAL;
-
- if (pdata->hw_setup) {
- error = pdata->hw_setup(client);
- if (error < 0)
- return error;
- }
-
- error = gpio_request_one(pdata->vout_gpio, GPIOF_IN, GP2A_I2C_NAME);
- if (error)
- goto err_hw_shutdown;
-
- dt = kzalloc(sizeof(struct gp2a_data), GFP_KERNEL);
- if (!dt) {
- error = -ENOMEM;
- goto err_free_gpio;
- }
-
- dt->pdata = pdata;
- dt->i2c_client = client;
-
- error = gp2a_initialize(dt);
- if (error < 0)
- goto err_free_mem;
-
- dt->input = input_allocate_device();
- if (!dt->input) {
- error = -ENOMEM;
- goto err_free_mem;
- }
-
- input_set_drvdata(dt->input, dt);
-
- dt->input->open = gp2a_device_open;
- dt->input->close = gp2a_device_close;
- dt->input->name = GP2A_I2C_NAME;
- dt->input->id.bustype = BUS_I2C;
- dt->input->dev.parent = &client->dev;
-
- input_set_capability(dt->input, EV_SW, SW_FRONT_PROXIMITY);
-
- error = request_threaded_irq(client->irq, NULL, gp2a_irq,
- IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING |
- IRQF_ONESHOT,
- GP2A_I2C_NAME, dt);
- if (error) {
- dev_err(&client->dev, "irq request failed\n");
- goto err_free_input_dev;
- }
-
- error = input_register_device(dt->input);
- if (error) {
- dev_err(&client->dev, "device registration failed\n");
- goto err_free_irq;
- }
-
- device_init_wakeup(&client->dev, pdata->wakeup);
- i2c_set_clientdata(client, dt);
-
- return 0;
-
-err_free_irq:
- free_irq(client->irq, dt);
-err_free_input_dev:
- input_free_device(dt->input);
-err_free_mem:
- kfree(dt);
-err_free_gpio:
- gpio_free(pdata->vout_gpio);
-err_hw_shutdown:
- if (pdata->hw_shutdown)
- pdata->hw_shutdown(client);
- return error;
-}
-
-static int gp2a_remove(struct i2c_client *client)
-{
- struct gp2a_data *dt = i2c_get_clientdata(client);
- const struct gp2a_platform_data *pdata = dt->pdata;
-
- free_irq(client->irq, dt);
-
- input_unregister_device(dt->input);
- kfree(dt);
-
- gpio_free(pdata->vout_gpio);
-
- if (pdata->hw_shutdown)
- pdata->hw_shutdown(client);
-
- return 0;
-}
-
-static int __maybe_unused gp2a_suspend(struct device *dev)
-{
- struct i2c_client *client = to_i2c_client(dev);
- struct gp2a_data *dt = i2c_get_clientdata(client);
- int retval = 0;
-
- if (device_may_wakeup(&client->dev)) {
- enable_irq_wake(client->irq);
- } else {
- mutex_lock(&dt->input->mutex);
- if (dt->input->users)
- retval = gp2a_disable(dt);
- mutex_unlock(&dt->input->mutex);
- }
-
- return retval;
-}
-
-static int __maybe_unused gp2a_resume(struct device *dev)
-{
- struct i2c_client *client = to_i2c_client(dev);
- struct gp2a_data *dt = i2c_get_clientdata(client);
- int retval = 0;
-
- if (device_may_wakeup(&client->dev)) {
- disable_irq_wake(client->irq);
- } else {
- mutex_lock(&dt->input->mutex);
- if (dt->input->users)
- retval = gp2a_enable(dt);
- mutex_unlock(&dt->input->mutex);
- }
-
- return retval;
-}
-
-static SIMPLE_DEV_PM_OPS(gp2a_pm, gp2a_suspend, gp2a_resume);
-
-static const struct i2c_device_id gp2a_i2c_id[] = {
- { GP2A_I2C_NAME, 0 },
- { }
-};
-MODULE_DEVICE_TABLE(i2c, gp2a_i2c_id);
-
-static struct i2c_driver gp2a_i2c_driver = {
- .driver = {
- .name = GP2A_I2C_NAME,
- .pm = &gp2a_pm,
- },
- .probe = gp2a_probe,
- .remove = gp2a_remove,
- .id_table = gp2a_i2c_id,
-};
-
-module_i2c_driver(gp2a_i2c_driver);
-
-MODULE_AUTHOR("Courtney Cavin <courtney.cavin@sonyericsson.com>");
-MODULE_DESCRIPTION("Sharp GP2AP002A00F I2C Proximity/Opto sensor driver");
-MODULE_LICENSE("GPL v2");
diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h
index dc974c288e88..d0c39426ca2c 100644
--- a/drivers/input/serio/i8042-x86ia64io.h
+++ b/drivers/input/serio/i8042-x86ia64io.h
@@ -530,6 +530,17 @@ static const struct dmi_system_id __initconst i8042_dmi_nomux_table[] = {
DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo LaVie Z"),
},
},
+ {
+ /*
+ * Acer Aspire 5738z
+ * Touchpad stops working in mux mode when dis- + re-enabled
+ * with the touchpad enable/disable toggle hotkey
+ */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5738"),
+ },
+ },
{ }
};
@@ -927,6 +938,7 @@ static int i8042_pnp_kbd_probe(struct pnp_dev *dev, const struct pnp_device_id *
}
i8042_pnp_id_to_string(dev->id, i8042_kbd_firmware_id,
sizeof(i8042_kbd_firmware_id));
+ i8042_kbd_fwnode = dev_fwnode(&dev->dev);
/* Keyboard ports are always supposed to be wakeup-enabled */
device_set_wakeup_enable(&dev->dev, true);
diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c
index 20ff2bed3917..0dddf273afd9 100644
--- a/drivers/input/serio/i8042.c
+++ b/drivers/input/serio/i8042.c
@@ -21,6 +21,7 @@
#include <linux/i8042.h>
#include <linux/slab.h>
#include <linux/suspend.h>
+#include <linux/property.h>
#include <asm/io.h>
@@ -124,6 +125,7 @@ MODULE_PARM_DESC(unmask_kbd_data, "Unconditional enable (may reveal sensitive da
static bool i8042_bypass_aux_irq_test;
static char i8042_kbd_firmware_id[128];
static char i8042_aux_firmware_id[128];
+static struct fwnode_handle *i8042_kbd_fwnode;
#include "i8042.h"
@@ -1335,6 +1337,7 @@ static int __init i8042_create_kbd_port(void)
strlcpy(serio->phys, I8042_KBD_PHYS_DESC, sizeof(serio->phys));
strlcpy(serio->firmware_id, i8042_kbd_firmware_id,
sizeof(serio->firmware_id));
+ set_primary_fwnode(&serio->dev, i8042_kbd_fwnode);
port->serio = serio;
port->irq = I8042_KBD_IRQ;
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index c071f7c407b6..35c867b2d9a7 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -201,6 +201,18 @@ config TOUCHSCREEN_CHIPONE_ICN8505
To compile this driver as a module, choose M here: the
module will be called chipone_icn8505.
+config TOUCHSCREEN_CY8CTMA140
+ tristate "cy8ctma140 touchscreen"
+ depends on I2C
+ help
+ Say Y here if you have a Cypress CY8CTMA140 capacitive
+ touchscreen also just known as "TMA140"
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called cy8ctma140.
+
config TOUCHSCREEN_CY8CTMG110
tristate "cy8ctmg110 touchscreen"
depends on I2C
diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
index 94c6162409b3..30d1e1b42492 100644
--- a/drivers/input/touchscreen/Makefile
+++ b/drivers/input/touchscreen/Makefile
@@ -22,6 +22,7 @@ obj-$(CONFIG_TOUCHSCREEN_BU21013) += bu21013_ts.o
obj-$(CONFIG_TOUCHSCREEN_BU21029) += bu21029_ts.o
obj-$(CONFIG_TOUCHSCREEN_CHIPONE_ICN8318) += chipone_icn8318.o
obj-$(CONFIG_TOUCHSCREEN_CHIPONE_ICN8505) += chipone_icn8505.o
+obj-$(CONFIG_TOUCHSCREEN_CY8CTMA140) += cy8ctma140.o
obj-$(CONFIG_TOUCHSCREEN_CY8CTMG110) += cy8ctmg110_ts.o
obj-$(CONFIG_TOUCHSCREEN_CYTTSP_CORE) += cyttsp_core.o
obj-$(CONFIG_TOUCHSCREEN_CYTTSP_I2C) += cyttsp_i2c.o cyttsp_i2c_common.o
diff --git a/drivers/input/touchscreen/cy8ctma140.c b/drivers/input/touchscreen/cy8ctma140.c
new file mode 100644
index 000000000000..a9be29139cbf
--- /dev/null
+++ b/drivers/input/touchscreen/cy8ctma140.c
@@ -0,0 +1,353 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Driver for Cypress CY8CTMA140 (TMA140) touchscreen
+ * (C) 2020 Linus Walleij <linus.walleij@linaro.org>
+ * (C) 2007 Cypress
+ * (C) 2007 Google, Inc.
+ *
+ * Inspired by the tma140_skomer.c driver in the Samsung GT-S7710 code
+ * drop. The GT-S7710 is codenamed "Skomer", the code also indicates
+ * that the same touchscreen was used in a product called "Lucas".
+ *
+ * The code drop for GT-S7710 also contains a firmware downloader and
+ * 15 (!) versions of the firmware drop from Cypress. But here we assume
+ * the firmware got downloaded to the touchscreen flash successfully and
+ * just use it to read the fingers. The shipped vendor driver does the
+ * same.
+ */
+
+#include <asm/unaligned.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/input.h>
+#include <linux/input/touchscreen.h>
+#include <linux/input/mt.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/i2c.h>
+#include <linux/regulator/consumer.h>
+#include <linux/delay.h>
+
+#define CY8CTMA140_NAME "cy8ctma140"
+
+#define CY8CTMA140_MAX_FINGERS 4
+
+#define CY8CTMA140_GET_FINGERS 0x00
+#define CY8CTMA140_GET_FW_INFO 0x19
+
+/* This message also fits some bytes for touchkeys, if used */
+#define CY8CTMA140_PACKET_SIZE 31
+
+#define CY8CTMA140_INVALID_BUFFER_BIT 5
+
+struct cy8ctma140 {
+ struct input_dev *input;
+ struct touchscreen_properties props;
+ struct device *dev;
+ struct i2c_client *client;
+ struct regulator_bulk_data regulators[2];
+ u8 prev_fingers;
+ u8 prev_f1id;
+ u8 prev_f2id;
+};
+
+static void cy8ctma140_report(struct cy8ctma140 *ts, u8 *data, int n_fingers)
+{
+ static const u8 contact_offsets[] = { 0x03, 0x09, 0x10, 0x16 };
+ u8 *buf;
+ u16 x, y;
+ u8 w;
+ u8 id;
+ int slot;
+ int i;
+
+ for (i = 0; i < n_fingers; i++) {
+ buf = &data[contact_offsets[i]];
+
+ /*
+ * Odd contacts have contact ID in the lower nibble of
+ * the preceding byte, whereas even contacts have it in
+ * the upper nibble of the following byte.
+ */
+ id = i % 2 ? buf[-1] & 0x0f : buf[5] >> 4;
+ slot = input_mt_get_slot_by_key(ts->input, id);
+ if (slot < 0)
+ continue;
+
+ x = get_unaligned_be16(buf);
+ y = get_unaligned_be16(buf + 2);
+ w = buf[4];
+
+ dev_dbg(ts->dev, "finger %d: ID %02x (%d, %d) w: %d\n",
+ slot, id, x, y, w);
+
+ input_mt_slot(ts->input, slot);
+ input_mt_report_slot_state(ts->input, MT_TOOL_FINGER, true);
+ touchscreen_report_pos(ts->input, &ts->props, x, y, true);
+ input_report_abs(ts->input, ABS_MT_TOUCH_MAJOR, w);
+ }
+
+ input_mt_sync_frame(ts->input);
+ input_sync(ts->input);
+}
+
+static irqreturn_t cy8ctma140_irq_thread(int irq, void *d)
+{
+ struct cy8ctma140 *ts = d;
+ u8 cmdbuf[] = { CY8CTMA140_GET_FINGERS };
+ u8 buf[CY8CTMA140_PACKET_SIZE];
+ struct i2c_msg msg[] = {
+ {
+ .addr = ts->client->addr,
+ .flags = 0,
+ .len = sizeof(cmdbuf),
+ .buf = cmdbuf,
+ }, {
+ .addr = ts->client->addr,
+ .flags = I2C_M_RD,
+ .len = sizeof(buf),
+ .buf = buf,
+ },
+ };
+ u8 n_fingers;
+ int ret;
+
+ ret = i2c_transfer(ts->client->adapter, msg, ARRAY_SIZE(msg));
+ if (ret != ARRAY_SIZE(msg)) {
+ if (ret < 0)
+ dev_err(ts->dev, "error reading message: %d\n", ret);
+ else
+ dev_err(ts->dev, "wrong number of messages\n");
+ goto out;
+ }
+
+ if (buf[1] & BIT(CY8CTMA140_INVALID_BUFFER_BIT)) {
+ dev_dbg(ts->dev, "invalid event\n");
+ goto out;
+ }
+
+ n_fingers = buf[2] & 0x0f;
+ if (n_fingers > CY8CTMA140_MAX_FINGERS) {
+ dev_err(ts->dev, "unexpected number of fingers: %d\n",
+ n_fingers);
+ goto out;
+ }
+
+ cy8ctma140_report(ts, buf, n_fingers);
+
+out:
+ return IRQ_HANDLED;
+}
+
+static int cy8ctma140_init(struct cy8ctma140 *ts)
+{
+ u8 addr[1];
+ u8 buf[5];
+ int ret;
+
+ addr[0] = CY8CTMA140_GET_FW_INFO;
+ ret = i2c_master_send(ts->client, addr, 1);
+ if (ret < 0) {
+ dev_err(ts->dev, "error sending FW info message\n");
+ return ret;
+ }
+ ret = i2c_master_recv(ts->client, buf, 5);
+ if (ret < 0) {
+ dev_err(ts->dev, "error receiving FW info message\n");
+ return ret;
+ }
+ if (ret != 5) {
+ dev_err(ts->dev, "got only %d bytes\n", ret);
+ return -EIO;
+ }
+
+ dev_dbg(ts->dev, "vendor %c%c, HW ID %.2d, FW ver %.4d\n",
+ buf[0], buf[1], buf[3], buf[4]);
+
+ return 0;
+}
+
+static int cy8ctma140_power_up(struct cy8ctma140 *ts)
+{
+ int error;
+
+ error = regulator_bulk_enable(ARRAY_SIZE(ts->regulators),
+ ts->regulators);
+ if (error) {
+ dev_err(ts->dev, "failed to enable regulators\n");
+ return error;
+ }
+
+ msleep(250);
+
+ return 0;
+}
+
+static void cy8ctma140_power_down(struct cy8ctma140 *ts)
+{
+ regulator_bulk_disable(ARRAY_SIZE(ts->regulators),
+ ts->regulators);
+}
+
+/* Called from the registered devm action */
+static void cy8ctma140_power_off_action(void *d)
+{
+ struct cy8ctma140 *ts = d;
+
+ cy8ctma140_power_down(ts);
+}
+
+static int cy8ctma140_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct cy8ctma140 *ts;
+ struct input_dev *input;
+ struct device *dev = &client->dev;
+ int error;
+
+ ts = devm_kzalloc(dev, sizeof(*ts), GFP_KERNEL);
+ if (!ts)
+ return -ENOMEM;
+
+ input = devm_input_allocate_device(dev);
+ if (!input)
+ return -ENOMEM;
+
+ ts->dev = dev;
+ ts->client = client;
+ ts->input = input;
+
+ input_set_capability(input, EV_ABS, ABS_MT_POSITION_X);
+ input_set_capability(input, EV_ABS, ABS_MT_POSITION_Y);
+ /* One byte for width 0..255 so this is the limit */
+ input_set_abs_params(input, ABS_MT_TOUCH_MAJOR, 0, 255, 0, 0);
+ /*
+ * This sets up event max/min capabilities and fuzz.
+ * Some DT properties are compulsory so we do not need
+ * to provide defaults for X/Y max or pressure max.
+ *
+ * We just initialize a very simple MT touchscreen here,
+ * some devices use the capability of this touchscreen to
+ * provide touchkeys, and in that case this needs to be
+ * extended to handle touchkey input.
+ *
+ * The firmware takes care of finger tracking and dropping
+ * invalid ranges.
+ */
+ touchscreen_parse_properties(input, true, &ts->props);
+ input_abs_set_fuzz(input, ABS_MT_POSITION_X, 0);
+ input_abs_set_fuzz(input, ABS_MT_POSITION_Y, 0);
+
+ error = input_mt_init_slots(input, CY8CTMA140_MAX_FINGERS,
+ INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED);
+ if (error)
+ return error;
+
+ input->name = CY8CTMA140_NAME;
+ input->id.bustype = BUS_I2C;
+ input_set_drvdata(input, ts);
+
+ /*
+ * VCPIN is the analog voltage supply
+ * VDD is the digital voltage supply
+ * since the voltage range of VDD overlaps that of VCPIN,
+ * many designs to just supply both with a single voltage
+ * source of ~3.3 V.
+ */
+ ts->regulators[0].supply = "vcpin";
+ ts->regulators[1].supply = "vdd";
+ error = devm_regulator_bulk_get(dev, ARRAY_SIZE(ts->regulators),
+ ts->regulators);
+ if (error) {
+ if (error != -EPROBE_DEFER)
+ dev_err(dev, "Failed to get regulators %d\n",
+ error);
+ return error;
+ }
+
+ error = cy8ctma140_power_up(ts);
+ if (error)
+ return error;
+
+ error = devm_add_action_or_reset(dev, cy8ctma140_power_off_action, ts);
+ if (error) {
+ dev_err(dev, "failed to install power off handler\n");
+ return error;
+ }
+
+ error = devm_request_threaded_irq(dev, client->irq,
+ NULL, cy8ctma140_irq_thread,
+ IRQF_ONESHOT, CY8CTMA140_NAME, ts);
+ if (error) {
+ dev_err(dev, "irq %d busy? error %d\n", client->irq, error);
+ return error;
+ }
+
+ error = cy8ctma140_init(ts);
+ if (error)
+ return error;
+
+ error = input_register_device(input);
+ if (error)
+ return error;
+
+ i2c_set_clientdata(client, ts);
+
+ return 0;
+}
+
+static int __maybe_unused cy8ctma140_suspend(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct cy8ctma140 *ts = i2c_get_clientdata(client);
+
+ if (!device_may_wakeup(&client->dev))
+ cy8ctma140_power_down(ts);
+
+ return 0;
+}
+
+static int __maybe_unused cy8ctma140_resume(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct cy8ctma140 *ts = i2c_get_clientdata(client);
+ int error;
+
+ if (!device_may_wakeup(&client->dev)) {
+ error = cy8ctma140_power_up(ts);
+ if (error)
+ return error;
+ }
+
+ return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(cy8ctma140_pm, cy8ctma140_suspend, cy8ctma140_resume);
+
+static const struct i2c_device_id cy8ctma140_idtable[] = {
+ { CY8CTMA140_NAME, 0 },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(i2c, cy8ctma140_idtable);
+
+static const struct of_device_id cy8ctma140_of_match[] = {
+ { .compatible = "cypress,cy8ctma140", },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, cy8ctma140_of_match);
+
+static struct i2c_driver cy8ctma140_driver = {
+ .driver = {
+ .name = CY8CTMA140_NAME,
+ .pm = &cy8ctma140_pm,
+ .of_match_table = cy8ctma140_of_match,
+ },
+ .id_table = cy8ctma140_idtable,
+ .probe = cy8ctma140_probe,
+};
+module_i2c_driver(cy8ctma140_driver);
+
+MODULE_AUTHOR("Linus Walleij <linus.walleij@linaro.org>");
+MODULE_DESCRIPTION("CY8CTMA140 TouchScreen Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/input/touchscreen/edt-ft5x06.c b/drivers/input/touchscreen/edt-ft5x06.c
index d2587724c52a..3a4f18d3450d 100644
--- a/drivers/input/touchscreen/edt-ft5x06.c
+++ b/drivers/input/touchscreen/edt-ft5x06.c
@@ -38,6 +38,9 @@
#define WORK_REGISTER_NUM_X 0x33
#define WORK_REGISTER_NUM_Y 0x34
+#define PMOD_REGISTER_ACTIVE 0x00
+#define PMOD_REGISTER_HIBERNATE 0x03
+
#define M09_REGISTER_THRESHOLD 0x80
#define M09_REGISTER_GAIN 0x92
#define M09_REGISTER_OFFSET 0x93
@@ -53,6 +56,7 @@
#define WORK_REGISTER_OPMODE 0x3c
#define FACTORY_REGISTER_OPMODE 0x01
+#define PMOD_REGISTER_OPMODE 0xa5
#define TOUCH_EVENT_DOWN 0x00
#define TOUCH_EVENT_UP 0x01
@@ -65,6 +69,12 @@
#define EDT_RAW_DATA_RETRIES 100
#define EDT_RAW_DATA_DELAY 1000 /* usec */
+enum edt_pmode {
+ EDT_PMODE_NOT_SUPPORTED,
+ EDT_PMODE_HIBERNATE,
+ EDT_PMODE_POWEROFF,
+};
+
enum edt_ver {
EDT_M06,
EDT_M09,
@@ -103,6 +113,7 @@ struct edt_ft5x06_ts_data {
struct mutex mutex;
bool factory_mode;
+ enum edt_pmode suspend_mode;
int threshold;
int gain;
int offset;
@@ -527,6 +538,29 @@ static const struct attribute_group edt_ft5x06_attr_group = {
.attrs = edt_ft5x06_attrs,
};
+static void edt_ft5x06_restore_reg_parameters(struct edt_ft5x06_ts_data *tsdata)
+{
+ struct edt_reg_addr *reg_addr = &tsdata->reg_addr;
+
+ edt_ft5x06_register_write(tsdata, reg_addr->reg_threshold,
+ tsdata->threshold);
+ edt_ft5x06_register_write(tsdata, reg_addr->reg_gain,
+ tsdata->gain);
+ if (reg_addr->reg_offset != NO_REGISTER)
+ edt_ft5x06_register_write(tsdata, reg_addr->reg_offset,
+ tsdata->offset);
+ if (reg_addr->reg_offset_x != NO_REGISTER)
+ edt_ft5x06_register_write(tsdata, reg_addr->reg_offset_x,
+ tsdata->offset_x);
+ if (reg_addr->reg_offset_y != NO_REGISTER)
+ edt_ft5x06_register_write(tsdata, reg_addr->reg_offset_y,
+ tsdata->offset_y);
+ if (reg_addr->reg_report_rate != NO_REGISTER)
+ edt_ft5x06_register_write(tsdata, reg_addr->reg_report_rate,
+ tsdata->report_rate);
+
+}
+
#ifdef CONFIG_DEBUG_FS
static int edt_ft5x06_factory_mode(struct edt_ft5x06_ts_data *tsdata)
{
@@ -592,7 +626,6 @@ static int edt_ft5x06_work_mode(struct edt_ft5x06_ts_data *tsdata)
{
struct i2c_client *client = tsdata->client;
int retries = EDT_SWITCH_MODE_RETRIES;
- struct edt_reg_addr *reg_addr = &tsdata->reg_addr;
int ret;
int error;
@@ -624,24 +657,7 @@ static int edt_ft5x06_work_mode(struct edt_ft5x06_ts_data *tsdata)
kfree(tsdata->raw_buffer);
tsdata->raw_buffer = NULL;
- /* restore parameters */
- edt_ft5x06_register_write(tsdata, reg_addr->reg_threshold,
- tsdata->threshold);
- edt_ft5x06_register_write(tsdata, reg_addr->reg_gain,
- tsdata->gain);
- if (reg_addr->reg_offset != NO_REGISTER)
- edt_ft5x06_register_write(tsdata, reg_addr->reg_offset,
- tsdata->offset);
- if (reg_addr->reg_offset_x != NO_REGISTER)
- edt_ft5x06_register_write(tsdata, reg_addr->reg_offset_x,
- tsdata->offset_x);
- if (reg_addr->reg_offset_y != NO_REGISTER)
- edt_ft5x06_register_write(tsdata, reg_addr->reg_offset_y,
- tsdata->offset_y);
- if (reg_addr->reg_report_rate != NO_REGISTER)
- edt_ft5x06_register_write(tsdata, reg_addr->reg_report_rate,
- tsdata->report_rate);
-
+ edt_ft5x06_restore_reg_parameters(tsdata);
enable_irq(client->irq);
return 0;
@@ -762,9 +778,8 @@ static const struct file_operations debugfs_raw_data_fops = {
.read = edt_ft5x06_debugfs_raw_data_read,
};
-static void
-edt_ft5x06_ts_prepare_debugfs(struct edt_ft5x06_ts_data *tsdata,
- const char *debugfs_name)
+static void edt_ft5x06_ts_prepare_debugfs(struct edt_ft5x06_ts_data *tsdata,
+ const char *debugfs_name)
{
tsdata->debug_dir = debugfs_create_dir(debugfs_name, NULL);
@@ -777,8 +792,7 @@ edt_ft5x06_ts_prepare_debugfs(struct edt_ft5x06_ts_data *tsdata,
tsdata->debug_dir, tsdata, &debugfs_raw_data_fops);
}
-static void
-edt_ft5x06_ts_teardown_debugfs(struct edt_ft5x06_ts_data *tsdata)
+static void edt_ft5x06_ts_teardown_debugfs(struct edt_ft5x06_ts_data *tsdata)
{
debugfs_remove_recursive(tsdata->debug_dir);
kfree(tsdata->raw_buffer);
@@ -786,14 +800,17 @@ edt_ft5x06_ts_teardown_debugfs(struct edt_ft5x06_ts_data *tsdata)
#else
-static inline void
-edt_ft5x06_ts_prepare_debugfs(struct edt_ft5x06_ts_data *tsdata,
- const char *debugfs_name)
+static int edt_ft5x06_factory_mode(struct edt_ft5x06_ts_data *tsdata)
+{
+ return -ENOSYS;
+}
+
+static void edt_ft5x06_ts_prepare_debugfs(struct edt_ft5x06_ts_data *tsdata,
+ const char *debugfs_name)
{
}
-static inline void
-edt_ft5x06_ts_teardown_debugfs(struct edt_ft5x06_ts_data *tsdata)
+static void edt_ft5x06_ts_teardown_debugfs(struct edt_ft5x06_ts_data *tsdata)
{
}
@@ -938,19 +955,25 @@ static void edt_ft5x06_ts_get_defaults(struct device *dev,
error = device_property_read_u32(dev, "offset", &val);
if (!error) {
- edt_ft5x06_register_write(tsdata, reg_addr->reg_offset, val);
+ if (reg_addr->reg_offset != NO_REGISTER)
+ edt_ft5x06_register_write(tsdata,
+ reg_addr->reg_offset, val);
tsdata->offset = val;
}
error = device_property_read_u32(dev, "offset-x", &val);
if (!error) {
- edt_ft5x06_register_write(tsdata, reg_addr->reg_offset_x, val);
+ if (reg_addr->reg_offset_x != NO_REGISTER)
+ edt_ft5x06_register_write(tsdata,
+ reg_addr->reg_offset_x, val);
tsdata->offset_x = val;
}
error = device_property_read_u32(dev, "offset-y", &val);
if (!error) {
- edt_ft5x06_register_write(tsdata, reg_addr->reg_offset_y, val);
+ if (reg_addr->reg_offset_y != NO_REGISTER)
+ edt_ft5x06_register_write(tsdata,
+ reg_addr->reg_offset_y, val);
tsdata->offset_y = val;
}
}
@@ -1114,6 +1137,19 @@ static int edt_ft5x06_ts_probe(struct i2c_client *client,
return error;
}
+ /*
+ * Check which sleep modes we can support. Power-off requieres the
+ * reset-pin to ensure correct power-down/power-up behaviour. Start with
+ * the EDT_PMODE_POWEROFF test since this is the deepest possible sleep
+ * mode.
+ */
+ if (tsdata->reset_gpio)
+ tsdata->suspend_mode = EDT_PMODE_POWEROFF;
+ else if (tsdata->wake_gpio)
+ tsdata->suspend_mode = EDT_PMODE_HIBERNATE;
+ else
+ tsdata->suspend_mode = EDT_PMODE_NOT_SUPPORTED;
+
if (tsdata->wake_gpio) {
usleep_range(5000, 6000);
gpiod_set_value_cansleep(tsdata->wake_gpio, 1);
@@ -1227,6 +1263,102 @@ static int edt_ft5x06_ts_remove(struct i2c_client *client)
return 0;
}
+static int __maybe_unused edt_ft5x06_ts_suspend(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct edt_ft5x06_ts_data *tsdata = i2c_get_clientdata(client);
+ struct gpio_desc *reset_gpio = tsdata->reset_gpio;
+ int ret;
+
+ if (device_may_wakeup(dev))
+ return 0;
+
+ if (tsdata->suspend_mode == EDT_PMODE_NOT_SUPPORTED)
+ return 0;
+
+ /* Enter hibernate mode. */
+ ret = edt_ft5x06_register_write(tsdata, PMOD_REGISTER_OPMODE,
+ PMOD_REGISTER_HIBERNATE);
+ if (ret)
+ dev_warn(dev, "Failed to set hibernate mode\n");
+
+ if (tsdata->suspend_mode == EDT_PMODE_HIBERNATE)
+ return 0;
+
+ /*
+ * Power-off according the datasheet. Cut the power may leaf the irq
+ * line in an undefined state depending on the host pull resistor
+ * settings. Disable the irq to avoid adjusting each host till the
+ * device is back in a full functional state.
+ */
+ disable_irq(tsdata->client->irq);
+
+ gpiod_set_value_cansleep(reset_gpio, 1);
+ usleep_range(1000, 2000);
+
+ ret = regulator_disable(tsdata->vcc);
+ if (ret)
+ dev_warn(dev, "Failed to disable vcc\n");
+
+ return 0;
+}
+
+static int __maybe_unused edt_ft5x06_ts_resume(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct edt_ft5x06_ts_data *tsdata = i2c_get_clientdata(client);
+ int ret = 0;
+
+ if (device_may_wakeup(dev))
+ return 0;
+
+ if (tsdata->suspend_mode == EDT_PMODE_NOT_SUPPORTED)
+ return 0;
+
+ if (tsdata->suspend_mode == EDT_PMODE_POWEROFF) {
+ struct gpio_desc *reset_gpio = tsdata->reset_gpio;
+
+ /*
+ * We can't check if the regulator is a dummy or a real
+ * regulator. So we need to specify the 5ms reset time (T_rst)
+ * here instead of the 100us T_rtp time. We also need to wait
+ * 300ms in case it was a real supply and the power was cutted
+ * of. Toggle the reset pin is also a way to exit the hibernate
+ * mode.
+ */
+ gpiod_set_value_cansleep(reset_gpio, 1);
+ usleep_range(5000, 6000);
+
+ ret = regulator_enable(tsdata->vcc);
+ if (ret) {
+ dev_err(dev, "Failed to enable vcc\n");
+ return ret;
+ }
+
+ usleep_range(1000, 2000);
+ gpiod_set_value_cansleep(reset_gpio, 0);
+ msleep(300);
+
+ edt_ft5x06_restore_reg_parameters(tsdata);
+ enable_irq(tsdata->client->irq);
+
+ if (tsdata->factory_mode)
+ ret = edt_ft5x06_factory_mode(tsdata);
+ } else {
+ struct gpio_desc *wake_gpio = tsdata->wake_gpio;
+
+ gpiod_set_value_cansleep(wake_gpio, 0);
+ usleep_range(5000, 6000);
+ gpiod_set_value_cansleep(wake_gpio, 1);
+ }
+
+
+ return ret;
+}
+
+static SIMPLE_DEV_PM_OPS(edt_ft5x06_ts_pm_ops,
+ edt_ft5x06_ts_suspend, edt_ft5x06_ts_resume);
+
static const struct edt_i2c_chip_data edt_ft5x06_data = {
.max_support_points = 5,
};
@@ -1265,6 +1397,8 @@ static struct i2c_driver edt_ft5x06_ts_driver = {
.driver = {
.name = "edt_ft5x06",
.of_match_table = edt_ft5x06_of_match,
+ .pm = &edt_ft5x06_ts_pm_ops,
+ .probe_type = PROBE_PREFER_ASYNCHRONOUS,
},
.id_table = edt_ft5x06_ts_id,
.probe = edt_ft5x06_ts_probe,
diff --git a/drivers/input/touchscreen/elants_i2c.c b/drivers/input/touchscreen/elants_i2c.c
index 491179967b29..14c577c16b16 100644
--- a/drivers/input/touchscreen/elants_i2c.c
+++ b/drivers/input/touchscreen/elants_i2c.c
@@ -1309,6 +1309,7 @@ static int elants_i2c_probe(struct i2c_client *client,
input_set_abs_params(ts->input, ABS_MT_PRESSURE, 0, 255, 0, 0);
input_abs_set_res(ts->input, ABS_MT_POSITION_X, ts->x_res);
input_abs_set_res(ts->input, ABS_MT_POSITION_Y, ts->y_res);
+ input_abs_set_res(ts->input, ABS_MT_TOUCH_MAJOR, 1);
error = input_register_device(ts->input);
if (error) {
diff --git a/drivers/input/touchscreen/goodix.c b/drivers/input/touchscreen/goodix.c
index 0403102e807e..02c75ea385e0 100644
--- a/drivers/input/touchscreen/goodix.c
+++ b/drivers/input/touchscreen/goodix.c
@@ -29,33 +29,6 @@
#include <linux/of.h>
#include <asm/unaligned.h>
-struct goodix_ts_data;
-
-struct goodix_chip_data {
- u16 config_addr;
- int config_len;
- int (*check_config)(struct goodix_ts_data *, const struct firmware *);
-};
-
-struct goodix_ts_data {
- struct i2c_client *client;
- struct input_dev *input_dev;
- const struct goodix_chip_data *chip;
- struct touchscreen_properties prop;
- unsigned int max_touch_num;
- unsigned int int_trigger_type;
- struct regulator *avdd28;
- struct regulator *vddio;
- struct gpio_desc *gpiod_int;
- struct gpio_desc *gpiod_rst;
- u16 id;
- u16 version;
- const char *cfg_name;
- struct completion firmware_loading_complete;
- unsigned long irq_flags;
- unsigned int contact_size;
-};
-
#define GOODIX_GPIO_INT_NAME "irq"
#define GOODIX_GPIO_RST_NAME "reset"
@@ -65,10 +38,13 @@ struct goodix_ts_data {
#define GOODIX_CONTACT_SIZE 8
#define GOODIX_MAX_CONTACT_SIZE 9
#define GOODIX_MAX_CONTACTS 10
+#define GOODIX_MAX_KEYS 7
-#define GOODIX_CONFIG_MAX_LENGTH 240
+#define GOODIX_CONFIG_MIN_LENGTH 186
#define GOODIX_CONFIG_911_LENGTH 186
#define GOODIX_CONFIG_967_LENGTH 228
+#define GOODIX_CONFIG_GT9X_LENGTH 240
+#define GOODIX_CONFIG_MAX_LENGTH 240
/* Register defines */
#define GOODIX_REG_COMMAND 0x8040
@@ -80,39 +56,118 @@ struct goodix_ts_data {
#define GOODIX_REG_ID 0x8140
#define GOODIX_BUFFER_STATUS_READY BIT(7)
+#define GOODIX_HAVE_KEY BIT(4)
#define GOODIX_BUFFER_STATUS_TIMEOUT 20
#define RESOLUTION_LOC 1
#define MAX_CONTACTS_LOC 5
#define TRIGGER_LOC 6
+/* Our special handling for GPIO accesses through ACPI is x86 specific */
+#if defined CONFIG_X86 && defined CONFIG_ACPI
+#define ACPI_GPIO_SUPPORT
+#endif
+
+struct goodix_ts_data;
+
+enum goodix_irq_pin_access_method {
+ IRQ_PIN_ACCESS_NONE,
+ IRQ_PIN_ACCESS_GPIO,
+ IRQ_PIN_ACCESS_ACPI_GPIO,
+ IRQ_PIN_ACCESS_ACPI_METHOD,
+};
+
+struct goodix_chip_data {
+ u16 config_addr;
+ int config_len;
+ int (*check_config)(struct goodix_ts_data *ts, const u8 *cfg, int len);
+ void (*calc_config_checksum)(struct goodix_ts_data *ts);
+};
+
+struct goodix_chip_id {
+ const char *id;
+ const struct goodix_chip_data *data;
+};
+
+#define GOODIX_ID_MAX_LEN 4
+
+struct goodix_ts_data {
+ struct i2c_client *client;
+ struct input_dev *input_dev;
+ const struct goodix_chip_data *chip;
+ struct touchscreen_properties prop;
+ unsigned int max_touch_num;
+ unsigned int int_trigger_type;
+ struct regulator *avdd28;
+ struct regulator *vddio;
+ struct gpio_desc *gpiod_int;
+ struct gpio_desc *gpiod_rst;
+ int gpio_count;
+ int gpio_int_idx;
+ char id[GOODIX_ID_MAX_LEN + 1];
+ u16 version;
+ const char *cfg_name;
+ bool reset_controller_at_probe;
+ bool load_cfg_from_disk;
+ struct completion firmware_loading_complete;
+ unsigned long irq_flags;
+ enum goodix_irq_pin_access_method irq_pin_access_method;
+ unsigned int contact_size;
+ u8 config[GOODIX_CONFIG_MAX_LENGTH];
+ unsigned short keymap[GOODIX_MAX_KEYS];
+};
+
static int goodix_check_cfg_8(struct goodix_ts_data *ts,
- const struct firmware *cfg);
+ const u8 *cfg, int len);
static int goodix_check_cfg_16(struct goodix_ts_data *ts,
- const struct firmware *cfg);
+ const u8 *cfg, int len);
+static void goodix_calc_cfg_checksum_8(struct goodix_ts_data *ts);
+static void goodix_calc_cfg_checksum_16(struct goodix_ts_data *ts);
static const struct goodix_chip_data gt1x_chip_data = {
.config_addr = GOODIX_GT1X_REG_CONFIG_DATA,
- .config_len = GOODIX_CONFIG_MAX_LENGTH,
+ .config_len = GOODIX_CONFIG_GT9X_LENGTH,
.check_config = goodix_check_cfg_16,
+ .calc_config_checksum = goodix_calc_cfg_checksum_16,
};
static const struct goodix_chip_data gt911_chip_data = {
.config_addr = GOODIX_GT9X_REG_CONFIG_DATA,
.config_len = GOODIX_CONFIG_911_LENGTH,
.check_config = goodix_check_cfg_8,
+ .calc_config_checksum = goodix_calc_cfg_checksum_8,
};
static const struct goodix_chip_data gt967_chip_data = {
.config_addr = GOODIX_GT9X_REG_CONFIG_DATA,
.config_len = GOODIX_CONFIG_967_LENGTH,
.check_config = goodix_check_cfg_8,
+ .calc_config_checksum = goodix_calc_cfg_checksum_8,
};
static const struct goodix_chip_data gt9x_chip_data = {
.config_addr = GOODIX_GT9X_REG_CONFIG_DATA,
- .config_len = GOODIX_CONFIG_MAX_LENGTH,
+ .config_len = GOODIX_CONFIG_GT9X_LENGTH,
.check_config = goodix_check_cfg_8,
+ .calc_config_checksum = goodix_calc_cfg_checksum_8,
+};
+
+static const struct goodix_chip_id goodix_chip_ids[] = {
+ { .id = "1151", .data = &gt1x_chip_data },
+ { .id = "5663", .data = &gt1x_chip_data },
+ { .id = "5688", .data = &gt1x_chip_data },
+ { .id = "917S", .data = &gt1x_chip_data },
+
+ { .id = "911", .data = &gt911_chip_data },
+ { .id = "9271", .data = &gt911_chip_data },
+ { .id = "9110", .data = &gt911_chip_data },
+ { .id = "927", .data = &gt911_chip_data },
+ { .id = "928", .data = &gt911_chip_data },
+
+ { .id = "912", .data = &gt967_chip_data },
+ { .id = "9147", .data = &gt967_chip_data },
+ { .id = "967", .data = &gt967_chip_data },
+ { }
};
static const unsigned long goodix_irq_flags[] = {
@@ -168,6 +223,22 @@ static const struct dmi_system_id nine_bytes_report[] = {
{}
};
+/*
+ * Those tablets have their x coordinate inverted
+ */
+static const struct dmi_system_id inverted_x_screen[] = {
+#if defined(CONFIG_DMI) && defined(CONFIG_X86)
+ {
+ .ident = "Cube I15-TC",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Cube"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "I15-TC")
+ },
+ },
+#endif
+ {}
+};
+
/**
* goodix_i2c_read - read data from a register of the i2c slave device.
*
@@ -235,28 +306,16 @@ static int goodix_i2c_write_u8(struct i2c_client *client, u16 reg, u8 value)
return goodix_i2c_write(client, reg, &value, sizeof(value));
}
-static const struct goodix_chip_data *goodix_get_chip_data(u16 id)
+static const struct goodix_chip_data *goodix_get_chip_data(const char *id)
{
- switch (id) {
- case 1151:
- case 5663:
- case 5688:
- return &gt1x_chip_data;
-
- case 911:
- case 9271:
- case 9110:
- case 927:
- case 928:
- return &gt911_chip_data;
-
- case 912:
- case 967:
- return &gt967_chip_data;
+ unsigned int i;
- default:
- return &gt9x_chip_data;
+ for (i = 0; goodix_chip_ids[i].id; i++) {
+ if (!strcmp(goodix_chip_ids[i].id, id))
+ return goodix_chip_ids[i].data;
}
+
+ return &gt9x_chip_data;
}
static int goodix_ts_read_input_report(struct goodix_ts_data *ts, u8 *data)
@@ -264,6 +323,13 @@ static int goodix_ts_read_input_report(struct goodix_ts_data *ts, u8 *data)
unsigned long max_timeout;
int touch_num;
int error;
+ u16 addr = GOODIX_READ_COOR_ADDR;
+ /*
+ * We are going to read 1-byte header,
+ * ts->contact_size * max(1, touch_num) bytes of coordinates
+ * and 1-byte footer which contains the touch-key code.
+ */
+ const int header_contact_keycode_size = 1 + ts->contact_size + 1;
/*
* The 'buffer status' bit, which indicates that the data is valid, is
@@ -272,8 +338,8 @@ static int goodix_ts_read_input_report(struct goodix_ts_data *ts, u8 *data)
*/
max_timeout = jiffies + msecs_to_jiffies(GOODIX_BUFFER_STATUS_TIMEOUT);
do {
- error = goodix_i2c_read(ts->client, GOODIX_READ_COOR_ADDR,
- data, ts->contact_size + 1);
+ error = goodix_i2c_read(ts->client, addr, data,
+ header_contact_keycode_size);
if (error) {
dev_err(&ts->client->dev, "I2C transfer error: %d\n",
error);
@@ -286,11 +352,10 @@ static int goodix_ts_read_input_report(struct goodix_ts_data *ts, u8 *data)
return -EPROTO;
if (touch_num > 1) {
- data += 1 + ts->contact_size;
+ addr += header_contact_keycode_size;
+ data += header_contact_keycode_size;
error = goodix_i2c_read(ts->client,
- GOODIX_READ_COOR_ADDR +
- 1 + ts->contact_size,
- data,
+ addr, data,
ts->contact_size *
(touch_num - 1));
if (error)
@@ -307,7 +372,7 @@ static int goodix_ts_read_input_report(struct goodix_ts_data *ts, u8 *data)
* The Goodix panel will send spurious interrupts after a
* 'finger up' event, which will always cause a timeout.
*/
- return 0;
+ return -ENOMSG;
}
static void goodix_ts_report_touch_8b(struct goodix_ts_data *ts, u8 *coor_data)
@@ -340,6 +405,25 @@ static void goodix_ts_report_touch_9b(struct goodix_ts_data *ts, u8 *coor_data)
input_report_abs(ts->input_dev, ABS_MT_WIDTH_MAJOR, input_w);
}
+static void goodix_ts_report_key(struct goodix_ts_data *ts, u8 *data)
+{
+ int touch_num;
+ u8 key_value;
+ int i;
+
+ if (data[0] & GOODIX_HAVE_KEY) {
+ touch_num = data[0] & 0x0f;
+ key_value = data[1 + ts->contact_size * touch_num];
+ for (i = 0; i < GOODIX_MAX_KEYS; i++)
+ if (key_value & BIT(i))
+ input_report_key(ts->input_dev,
+ ts->keymap[i], 1);
+ } else {
+ for (i = 0; i < GOODIX_MAX_KEYS; i++)
+ input_report_key(ts->input_dev, ts->keymap[i], 0);
+ }
+}
+
/**
* goodix_process_events - Process incoming events
*
@@ -350,7 +434,7 @@ static void goodix_ts_report_touch_9b(struct goodix_ts_data *ts, u8 *coor_data)
*/
static void goodix_process_events(struct goodix_ts_data *ts)
{
- u8 point_data[1 + GOODIX_MAX_CONTACT_SIZE * GOODIX_MAX_CONTACTS];
+ u8 point_data[2 + GOODIX_MAX_CONTACT_SIZE * GOODIX_MAX_CONTACTS];
int touch_num;
int i;
@@ -358,11 +442,7 @@ static void goodix_process_events(struct goodix_ts_data *ts)
if (touch_num < 0)
return;
- /*
- * Bit 4 of the first byte reports the status of the capacitive
- * Windows/Home button.
- */
- input_report_key(ts->input_dev, KEY_LEFTMETA, point_data[0] & BIT(4));
+ goodix_ts_report_key(ts, point_data);
for (i = 0; i < touch_num; i++)
if (ts->contact_size == 9)
@@ -406,22 +486,21 @@ static int goodix_request_irq(struct goodix_ts_data *ts)
ts->irq_flags, ts->client->name, ts);
}
-static int goodix_check_cfg_8(struct goodix_ts_data *ts,
- const struct firmware *cfg)
+static int goodix_check_cfg_8(struct goodix_ts_data *ts, const u8 *cfg, int len)
{
- int i, raw_cfg_len = cfg->size - 2;
+ int i, raw_cfg_len = len - 2;
u8 check_sum = 0;
for (i = 0; i < raw_cfg_len; i++)
- check_sum += cfg->data[i];
+ check_sum += cfg[i];
check_sum = (~check_sum) + 1;
- if (check_sum != cfg->data[raw_cfg_len]) {
+ if (check_sum != cfg[raw_cfg_len]) {
dev_err(&ts->client->dev,
"The checksum of the config fw is not correct");
return -EINVAL;
}
- if (cfg->data[raw_cfg_len + 1] != 1) {
+ if (cfg[raw_cfg_len + 1] != 1) {
dev_err(&ts->client->dev,
"Config fw must have Config_Fresh register set");
return -EINVAL;
@@ -430,22 +509,35 @@ static int goodix_check_cfg_8(struct goodix_ts_data *ts,
return 0;
}
-static int goodix_check_cfg_16(struct goodix_ts_data *ts,
- const struct firmware *cfg)
+static void goodix_calc_cfg_checksum_8(struct goodix_ts_data *ts)
{
- int i, raw_cfg_len = cfg->size - 3;
+ int i, raw_cfg_len = ts->chip->config_len - 2;
+ u8 check_sum = 0;
+
+ for (i = 0; i < raw_cfg_len; i++)
+ check_sum += ts->config[i];
+ check_sum = (~check_sum) + 1;
+
+ ts->config[raw_cfg_len] = check_sum;
+ ts->config[raw_cfg_len + 1] = 1; /* Set "config_fresh" bit */
+}
+
+static int goodix_check_cfg_16(struct goodix_ts_data *ts, const u8 *cfg,
+ int len)
+{
+ int i, raw_cfg_len = len - 3;
u16 check_sum = 0;
for (i = 0; i < raw_cfg_len; i += 2)
- check_sum += get_unaligned_be16(&cfg->data[i]);
+ check_sum += get_unaligned_be16(&cfg[i]);
check_sum = (~check_sum) + 1;
- if (check_sum != get_unaligned_be16(&cfg->data[raw_cfg_len])) {
+ if (check_sum != get_unaligned_be16(&cfg[raw_cfg_len])) {
dev_err(&ts->client->dev,
"The checksum of the config fw is not correct");
return -EINVAL;
}
- if (cfg->data[raw_cfg_len + 2] != 1) {
+ if (cfg[raw_cfg_len + 2] != 1) {
dev_err(&ts->client->dev,
"Config fw must have Config_Fresh register set");
return -EINVAL;
@@ -454,22 +546,35 @@ static int goodix_check_cfg_16(struct goodix_ts_data *ts,
return 0;
}
+static void goodix_calc_cfg_checksum_16(struct goodix_ts_data *ts)
+{
+ int i, raw_cfg_len = ts->chip->config_len - 3;
+ u16 check_sum = 0;
+
+ for (i = 0; i < raw_cfg_len; i += 2)
+ check_sum += get_unaligned_be16(&ts->config[i]);
+ check_sum = (~check_sum) + 1;
+
+ put_unaligned_be16(check_sum, &ts->config[raw_cfg_len]);
+ ts->config[raw_cfg_len + 2] = 1; /* Set "config_fresh" bit */
+}
+
/**
* goodix_check_cfg - Checks if config fw is valid
*
* @ts: goodix_ts_data pointer
* @cfg: firmware config data
*/
-static int goodix_check_cfg(struct goodix_ts_data *ts,
- const struct firmware *cfg)
+static int goodix_check_cfg(struct goodix_ts_data *ts, const u8 *cfg, int len)
{
- if (cfg->size > GOODIX_CONFIG_MAX_LENGTH) {
+ if (len < GOODIX_CONFIG_MIN_LENGTH ||
+ len > GOODIX_CONFIG_MAX_LENGTH) {
dev_err(&ts->client->dev,
"The length of the config fw is not correct");
return -EINVAL;
}
- return ts->chip->check_config(ts, cfg);
+ return ts->chip->check_config(ts, cfg, len);
}
/**
@@ -478,17 +583,15 @@ static int goodix_check_cfg(struct goodix_ts_data *ts,
* @ts: goodix_ts_data pointer
* @cfg: config firmware to write to device
*/
-static int goodix_send_cfg(struct goodix_ts_data *ts,
- const struct firmware *cfg)
+static int goodix_send_cfg(struct goodix_ts_data *ts, const u8 *cfg, int len)
{
int error;
- error = goodix_check_cfg(ts, cfg);
+ error = goodix_check_cfg(ts, cfg, len);
if (error)
return error;
- error = goodix_i2c_write(ts->client, ts->chip->config_addr, cfg->data,
- cfg->size);
+ error = goodix_i2c_write(ts->client, ts->chip->config_addr, cfg, len);
if (error) {
dev_err(&ts->client->dev, "Failed to write config data: %d",
error);
@@ -502,17 +605,93 @@ static int goodix_send_cfg(struct goodix_ts_data *ts,
return 0;
}
+#ifdef ACPI_GPIO_SUPPORT
+static int goodix_pin_acpi_direction_input(struct goodix_ts_data *ts)
+{
+ acpi_handle handle = ACPI_HANDLE(&ts->client->dev);
+ acpi_status status;
+
+ status = acpi_evaluate_object(handle, "INTI", NULL, NULL);
+ return ACPI_SUCCESS(status) ? 0 : -EIO;
+}
+
+static int goodix_pin_acpi_output_method(struct goodix_ts_data *ts, int value)
+{
+ acpi_handle handle = ACPI_HANDLE(&ts->client->dev);
+ acpi_status status;
+
+ status = acpi_execute_simple_method(handle, "INTO", value);
+ return ACPI_SUCCESS(status) ? 0 : -EIO;
+}
+#else
+static int goodix_pin_acpi_direction_input(struct goodix_ts_data *ts)
+{
+ dev_err(&ts->client->dev,
+ "%s called on device without ACPI support\n", __func__);
+ return -EINVAL;
+}
+
+static int goodix_pin_acpi_output_method(struct goodix_ts_data *ts, int value)
+{
+ dev_err(&ts->client->dev,
+ "%s called on device without ACPI support\n", __func__);
+ return -EINVAL;
+}
+#endif
+
+static int goodix_irq_direction_output(struct goodix_ts_data *ts, int value)
+{
+ switch (ts->irq_pin_access_method) {
+ case IRQ_PIN_ACCESS_NONE:
+ dev_err(&ts->client->dev,
+ "%s called without an irq_pin_access_method set\n",
+ __func__);
+ return -EINVAL;
+ case IRQ_PIN_ACCESS_GPIO:
+ return gpiod_direction_output(ts->gpiod_int, value);
+ case IRQ_PIN_ACCESS_ACPI_GPIO:
+ /*
+ * The IRQ pin triggers on a falling edge, so its gets marked
+ * as active-low, use output_raw to avoid the value inversion.
+ */
+ return gpiod_direction_output_raw(ts->gpiod_int, value);
+ case IRQ_PIN_ACCESS_ACPI_METHOD:
+ return goodix_pin_acpi_output_method(ts, value);
+ }
+
+ return -EINVAL; /* Never reached */
+}
+
+static int goodix_irq_direction_input(struct goodix_ts_data *ts)
+{
+ switch (ts->irq_pin_access_method) {
+ case IRQ_PIN_ACCESS_NONE:
+ dev_err(&ts->client->dev,
+ "%s called without an irq_pin_access_method set\n",
+ __func__);
+ return -EINVAL;
+ case IRQ_PIN_ACCESS_GPIO:
+ return gpiod_direction_input(ts->gpiod_int);
+ case IRQ_PIN_ACCESS_ACPI_GPIO:
+ return gpiod_direction_input(ts->gpiod_int);
+ case IRQ_PIN_ACCESS_ACPI_METHOD:
+ return goodix_pin_acpi_direction_input(ts);
+ }
+
+ return -EINVAL; /* Never reached */
+}
+
static int goodix_int_sync(struct goodix_ts_data *ts)
{
int error;
- error = gpiod_direction_output(ts->gpiod_int, 0);
+ error = goodix_irq_direction_output(ts, 0);
if (error)
return error;
msleep(50); /* T5: 50ms */
- error = gpiod_direction_input(ts->gpiod_int);
+ error = goodix_irq_direction_input(ts);
if (error)
return error;
@@ -536,7 +715,7 @@ static int goodix_reset(struct goodix_ts_data *ts)
msleep(20); /* T2: > 10ms */
/* HIGH: 0x28/0x29, LOW: 0xBA/0xBB */
- error = gpiod_direction_output(ts->gpiod_int, ts->client->addr == 0x14);
+ error = goodix_irq_direction_output(ts, ts->client->addr == 0x14);
if (error)
return error;
@@ -560,6 +739,124 @@ static int goodix_reset(struct goodix_ts_data *ts)
return 0;
}
+#ifdef ACPI_GPIO_SUPPORT
+#include <asm/cpu_device_id.h>
+#include <asm/intel-family.h>
+
+static const struct x86_cpu_id baytrail_cpu_ids[] = {
+ { X86_VENDOR_INTEL, 6, INTEL_FAM6_ATOM_SILVERMONT, X86_FEATURE_ANY, },
+ {}
+};
+
+static inline bool is_byt(void)
+{
+ const struct x86_cpu_id *id = x86_match_cpu(baytrail_cpu_ids);
+
+ return !!id;
+}
+
+static const struct acpi_gpio_params first_gpio = { 0, 0, false };
+static const struct acpi_gpio_params second_gpio = { 1, 0, false };
+
+static const struct acpi_gpio_mapping acpi_goodix_int_first_gpios[] = {
+ { GOODIX_GPIO_INT_NAME "-gpios", &first_gpio, 1 },
+ { GOODIX_GPIO_RST_NAME "-gpios", &second_gpio, 1 },
+ { },
+};
+
+static const struct acpi_gpio_mapping acpi_goodix_int_last_gpios[] = {
+ { GOODIX_GPIO_RST_NAME "-gpios", &first_gpio, 1 },
+ { GOODIX_GPIO_INT_NAME "-gpios", &second_gpio, 1 },
+ { },
+};
+
+static const struct acpi_gpio_mapping acpi_goodix_reset_only_gpios[] = {
+ { GOODIX_GPIO_RST_NAME "-gpios", &first_gpio, 1 },
+ { },
+};
+
+static int goodix_resource(struct acpi_resource *ares, void *data)
+{
+ struct goodix_ts_data *ts = data;
+ struct device *dev = &ts->client->dev;
+ struct acpi_resource_gpio *gpio;
+
+ switch (ares->type) {
+ case ACPI_RESOURCE_TYPE_GPIO:
+ gpio = &ares->data.gpio;
+ if (gpio->connection_type == ACPI_RESOURCE_GPIO_TYPE_INT) {
+ if (ts->gpio_int_idx == -1) {
+ ts->gpio_int_idx = ts->gpio_count;
+ } else {
+ dev_err(dev, "More then one GpioInt resource, ignoring ACPI GPIO resources\n");
+ ts->gpio_int_idx = -2;
+ }
+ }
+ ts->gpio_count++;
+ break;
+ default:
+ break;
+ }
+
+ return 0;
+}
+
+/*
+ * This function gets called in case we fail to get the irq GPIO directly
+ * because the ACPI tables lack GPIO-name to APCI _CRS index mappings
+ * (no _DSD UUID daffd814-6eba-4d8c-8a91-bc9bbf4aa301 data).
+ * In that case we add our own mapping and then goodix_get_gpio_config()
+ * retries to get the GPIOs based on the added mapping.
+ */
+static int goodix_add_acpi_gpio_mappings(struct goodix_ts_data *ts)
+{
+ const struct acpi_gpio_mapping *gpio_mapping = NULL;
+ struct device *dev = &ts->client->dev;
+ LIST_HEAD(resources);
+ int ret;
+
+ ts->gpio_count = 0;
+ ts->gpio_int_idx = -1;
+ ret = acpi_dev_get_resources(ACPI_COMPANION(dev), &resources,
+ goodix_resource, ts);
+ if (ret < 0) {
+ dev_err(dev, "Error getting ACPI resources: %d\n", ret);
+ return ret;
+ }
+
+ acpi_dev_free_resource_list(&resources);
+
+ if (ts->gpio_count == 2 && ts->gpio_int_idx == 0) {
+ ts->irq_pin_access_method = IRQ_PIN_ACCESS_ACPI_GPIO;
+ gpio_mapping = acpi_goodix_int_first_gpios;
+ } else if (ts->gpio_count == 2 && ts->gpio_int_idx == 1) {
+ ts->irq_pin_access_method = IRQ_PIN_ACCESS_ACPI_GPIO;
+ gpio_mapping = acpi_goodix_int_last_gpios;
+ } else if (ts->gpio_count == 1 && ts->gpio_int_idx == -1 &&
+ acpi_has_method(ACPI_HANDLE(dev), "INTI") &&
+ acpi_has_method(ACPI_HANDLE(dev), "INTO")) {
+ dev_info(dev, "Using ACPI INTI and INTO methods for IRQ pin access\n");
+ ts->irq_pin_access_method = IRQ_PIN_ACCESS_ACPI_METHOD;
+ gpio_mapping = acpi_goodix_reset_only_gpios;
+ } else if (is_byt() && ts->gpio_count == 2 && ts->gpio_int_idx == -1) {
+ dev_info(dev, "No ACPI GpioInt resource, assuming that the GPIO order is reset, int\n");
+ ts->irq_pin_access_method = IRQ_PIN_ACCESS_ACPI_GPIO;
+ gpio_mapping = acpi_goodix_int_last_gpios;
+ } else {
+ dev_warn(dev, "Unexpected ACPI resources: gpio_count %d, gpio_int_idx %d\n",
+ ts->gpio_count, ts->gpio_int_idx);
+ return -EINVAL;
+ }
+
+ return devm_acpi_dev_add_driver_gpios(dev, gpio_mapping);
+}
+#else
+static int goodix_add_acpi_gpio_mappings(struct goodix_ts_data *ts)
+{
+ return -EINVAL;
+}
+#endif /* CONFIG_X86 && CONFIG_ACPI */
+
/**
* goodix_get_gpio_config - Get GPIO config from ACPI/DT
*
@@ -570,6 +867,7 @@ static int goodix_get_gpio_config(struct goodix_ts_data *ts)
int error;
struct device *dev;
struct gpio_desc *gpiod;
+ bool added_acpi_mappings = false;
if (!ts->client)
return -EINVAL;
@@ -593,6 +891,7 @@ static int goodix_get_gpio_config(struct goodix_ts_data *ts)
return error;
}
+retry_get_irq_gpio:
/* Get the interrupt GPIO pin number */
gpiod = devm_gpiod_get_optional(dev, GOODIX_GPIO_INT_NAME, GPIOD_IN);
if (IS_ERR(gpiod)) {
@@ -602,6 +901,11 @@ static int goodix_get_gpio_config(struct goodix_ts_data *ts)
GOODIX_GPIO_INT_NAME, error);
return error;
}
+ if (!gpiod && has_acpi_companion(dev) && !added_acpi_mappings) {
+ added_acpi_mappings = true;
+ if (goodix_add_acpi_gpio_mappings(ts) == 0)
+ goto retry_get_irq_gpio;
+ }
ts->gpiod_int = gpiod;
@@ -617,6 +921,31 @@ static int goodix_get_gpio_config(struct goodix_ts_data *ts)
ts->gpiod_rst = gpiod;
+ switch (ts->irq_pin_access_method) {
+ case IRQ_PIN_ACCESS_ACPI_GPIO:
+ /*
+ * We end up here if goodix_add_acpi_gpio_mappings() has
+ * called devm_acpi_dev_add_driver_gpios() because the ACPI
+ * tables did not contain name to index mappings.
+ * Check that we successfully got both GPIOs after we've
+ * added our own acpi_gpio_mapping and if we did not get both
+ * GPIOs reset irq_pin_access_method to IRQ_PIN_ACCESS_NONE.
+ */
+ if (!ts->gpiod_int || !ts->gpiod_rst)
+ ts->irq_pin_access_method = IRQ_PIN_ACCESS_NONE;
+ break;
+ case IRQ_PIN_ACCESS_ACPI_METHOD:
+ if (!ts->gpiod_rst)
+ ts->irq_pin_access_method = IRQ_PIN_ACCESS_NONE;
+ break;
+ default:
+ if (ts->gpiod_int && ts->gpiod_rst) {
+ ts->reset_controller_at_probe = true;
+ ts->load_cfg_from_disk = true;
+ ts->irq_pin_access_method = IRQ_PIN_ACCESS_GPIO;
+ }
+ }
+
return 0;
}
@@ -629,12 +958,11 @@ static int goodix_get_gpio_config(struct goodix_ts_data *ts)
*/
static void goodix_read_config(struct goodix_ts_data *ts)
{
- u8 config[GOODIX_CONFIG_MAX_LENGTH];
int x_max, y_max;
int error;
error = goodix_i2c_read(ts->client, ts->chip->config_addr,
- config, ts->chip->config_len);
+ ts->config, ts->chip->config_len);
if (error) {
dev_warn(&ts->client->dev, "Error reading config: %d\n",
error);
@@ -643,15 +971,17 @@ static void goodix_read_config(struct goodix_ts_data *ts)
return;
}
- ts->int_trigger_type = config[TRIGGER_LOC] & 0x03;
- ts->max_touch_num = config[MAX_CONTACTS_LOC] & 0x0f;
+ ts->int_trigger_type = ts->config[TRIGGER_LOC] & 0x03;
+ ts->max_touch_num = ts->config[MAX_CONTACTS_LOC] & 0x0f;
- x_max = get_unaligned_le16(&config[RESOLUTION_LOC]);
- y_max = get_unaligned_le16(&config[RESOLUTION_LOC + 2]);
+ x_max = get_unaligned_le16(&ts->config[RESOLUTION_LOC]);
+ y_max = get_unaligned_le16(&ts->config[RESOLUTION_LOC + 2]);
if (x_max && y_max) {
input_abs_set_max(ts->input_dev, ABS_MT_POSITION_X, x_max - 1);
input_abs_set_max(ts->input_dev, ABS_MT_POSITION_Y, y_max - 1);
}
+
+ ts->chip->calc_config_checksum(ts);
}
/**
@@ -663,7 +993,7 @@ static int goodix_read_version(struct goodix_ts_data *ts)
{
int error;
u8 buf[6];
- char id_str[5];
+ char id_str[GOODIX_ID_MAX_LEN + 1];
error = goodix_i2c_read(ts->client, GOODIX_REG_ID, buf, sizeof(buf));
if (error) {
@@ -671,14 +1001,13 @@ static int goodix_read_version(struct goodix_ts_data *ts)
return error;
}
- memcpy(id_str, buf, 4);
- id_str[4] = 0;
- if (kstrtou16(id_str, 10, &ts->id))
- ts->id = 0x1001;
+ memcpy(id_str, buf, GOODIX_ID_MAX_LEN);
+ id_str[GOODIX_ID_MAX_LEN] = 0;
+ strscpy(ts->id, id_str, GOODIX_ID_MAX_LEN + 1);
ts->version = get_unaligned_le16(&buf[4]);
- dev_info(&ts->client->dev, "ID %d, version: %04x\n", ts->id,
+ dev_info(&ts->client->dev, "ID %s, version: %04x\n", ts->id,
ts->version);
return 0;
@@ -722,6 +1051,7 @@ static int goodix_i2c_test(struct i2c_client *client)
static int goodix_configure_dev(struct goodix_ts_data *ts)
{
int error;
+ int i;
ts->int_trigger_type = GOODIX_INT_TRIGGER;
ts->max_touch_num = GOODIX_MAX_CONTACTS;
@@ -736,11 +1066,23 @@ static int goodix_configure_dev(struct goodix_ts_data *ts)
ts->input_dev->phys = "input/ts";
ts->input_dev->id.bustype = BUS_I2C;
ts->input_dev->id.vendor = 0x0416;
- ts->input_dev->id.product = ts->id;
+ if (kstrtou16(ts->id, 10, &ts->input_dev->id.product))
+ ts->input_dev->id.product = 0x1001;
ts->input_dev->id.version = ts->version;
+ ts->input_dev->keycode = ts->keymap;
+ ts->input_dev->keycodesize = sizeof(ts->keymap[0]);
+ ts->input_dev->keycodemax = GOODIX_MAX_KEYS;
+
/* Capacitive Windows/Home button on some devices */
- input_set_capability(ts->input_dev, EV_KEY, KEY_LEFTMETA);
+ for (i = 0; i < GOODIX_MAX_KEYS; ++i) {
+ if (i == 0)
+ ts->keymap[i] = KEY_LEFTMETA;
+ else
+ ts->keymap[i] = KEY_F1 + (i - 1);
+
+ input_set_capability(ts->input_dev, EV_KEY, ts->keymap[i]);
+ }
input_set_capability(ts->input_dev, EV_ABS, ABS_MT_POSITION_X);
input_set_capability(ts->input_dev, EV_ABS, ABS_MT_POSITION_Y);
@@ -780,6 +1122,12 @@ static int goodix_configure_dev(struct goodix_ts_data *ts)
"Non-standard 9-bytes report format quirk\n");
}
+ if (dmi_check_system(inverted_x_screen)) {
+ ts->prop.invert_x = true;
+ dev_dbg(&ts->client->dev,
+ "Applying 'inverted x screen' quirk\n");
+ }
+
error = input_mt_init_slots(ts->input_dev, ts->max_touch_num,
INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED);
if (error) {
@@ -820,7 +1168,7 @@ static void goodix_config_cb(const struct firmware *cfg, void *ctx)
if (cfg) {
/* send device configuration to the firmware */
- error = goodix_send_cfg(ts, cfg);
+ error = goodix_send_cfg(ts, cfg->data, cfg->size);
if (error)
goto err_release_cfg;
}
@@ -889,7 +1237,8 @@ static int goodix_ts_probe(struct i2c_client *client,
if (error)
return error;
- if (ts->gpiod_int && ts->gpiod_rst) {
+reset:
+ if (ts->reset_controller_at_probe) {
/* reset the controller */
error = goodix_reset(ts);
if (error) {
@@ -900,6 +1249,12 @@ static int goodix_ts_probe(struct i2c_client *client,
error = goodix_i2c_test(client);
if (error) {
+ if (!ts->reset_controller_at_probe &&
+ ts->irq_pin_access_method != IRQ_PIN_ACCESS_NONE) {
+ /* Retry after a controller reset */
+ ts->reset_controller_at_probe = true;
+ goto reset;
+ }
dev_err(&client->dev, "I2C communication failure: %d\n", error);
return error;
}
@@ -912,10 +1267,10 @@ static int goodix_ts_probe(struct i2c_client *client,
ts->chip = goodix_get_chip_data(ts->id);
- if (ts->gpiod_int && ts->gpiod_rst) {
+ if (ts->load_cfg_from_disk) {
/* update device config */
ts->cfg_name = devm_kasprintf(&client->dev, GFP_KERNEL,
- "goodix_%d_cfg.bin", ts->id);
+ "goodix_%s_cfg.bin", ts->id);
if (!ts->cfg_name)
return -ENOMEM;
@@ -943,7 +1298,7 @@ static int goodix_ts_remove(struct i2c_client *client)
{
struct goodix_ts_data *ts = i2c_get_clientdata(client);
- if (ts->gpiod_int && ts->gpiod_rst)
+ if (ts->load_cfg_from_disk)
wait_for_completion(&ts->firmware_loading_complete);
return 0;
@@ -955,19 +1310,20 @@ static int __maybe_unused goodix_suspend(struct device *dev)
struct goodix_ts_data *ts = i2c_get_clientdata(client);
int error;
+ if (ts->load_cfg_from_disk)
+ wait_for_completion(&ts->firmware_loading_complete);
+
/* We need gpio pins to suspend/resume */
- if (!ts->gpiod_int || !ts->gpiod_rst) {
+ if (ts->irq_pin_access_method == IRQ_PIN_ACCESS_NONE) {
disable_irq(client->irq);
return 0;
}
- wait_for_completion(&ts->firmware_loading_complete);
-
/* Free IRQ as IRQ pin is used as output in the suspend sequence */
goodix_free_irq(ts);
/* Output LOW on the INT pin for 5 ms */
- error = gpiod_direction_output(ts->gpiod_int, 0);
+ error = goodix_irq_direction_output(ts, 0);
if (error) {
goodix_request_irq(ts);
return error;
@@ -979,7 +1335,7 @@ static int __maybe_unused goodix_suspend(struct device *dev)
GOODIX_CMD_SCREEN_OFF);
if (error) {
dev_err(&ts->client->dev, "Screen off command failed\n");
- gpiod_direction_input(ts->gpiod_int);
+ goodix_irq_direction_input(ts);
goodix_request_irq(ts);
return -EAGAIN;
}
@@ -997,9 +1353,10 @@ static int __maybe_unused goodix_resume(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
struct goodix_ts_data *ts = i2c_get_clientdata(client);
+ u8 config_ver;
int error;
- if (!ts->gpiod_int || !ts->gpiod_rst) {
+ if (ts->irq_pin_access_method == IRQ_PIN_ACCESS_NONE) {
enable_irq(client->irq);
return 0;
}
@@ -1008,7 +1365,7 @@ static int __maybe_unused goodix_resume(struct device *dev)
* Exit sleep mode by outputting HIGH level to INT pin
* for 2ms~5ms.
*/
- error = gpiod_direction_output(ts->gpiod_int, 1);
+ error = goodix_irq_direction_output(ts, 1);
if (error)
return error;
@@ -1018,6 +1375,27 @@ static int __maybe_unused goodix_resume(struct device *dev)
if (error)
return error;
+ error = goodix_i2c_read(ts->client, ts->chip->config_addr,
+ &config_ver, 1);
+ if (error)
+ dev_warn(dev, "Error reading config version: %d, resetting controller\n",
+ error);
+ else if (config_ver != ts->config[0])
+ dev_info(dev, "Config version mismatch %d != %d, resetting controller\n",
+ config_ver, ts->config[0]);
+
+ if (error != 0 || config_ver != ts->config[0]) {
+ error = goodix_reset(ts);
+ if (error) {
+ dev_err(dev, "Controller reset failed.\n");
+ return error;
+ }
+
+ error = goodix_send_cfg(ts, ts->config, ts->chip->config_len);
+ if (error)
+ return error;
+ }
+
error = goodix_request_irq(ts);
if (error)
return error;
@@ -1050,6 +1428,8 @@ static const struct of_device_id goodix_of_match[] = {
{ .compatible = "goodix,gt911" },
{ .compatible = "goodix,gt9110" },
{ .compatible = "goodix,gt912" },
+ { .compatible = "goodix,gt9147" },
+ { .compatible = "goodix,gt917s" },
{ .compatible = "goodix,gt927" },
{ .compatible = "goodix,gt9271" },
{ .compatible = "goodix,gt928" },
diff --git a/drivers/input/touchscreen/mms114.c b/drivers/input/touchscreen/mms114.c
index 69c6d559eeb0..b3dda1722bae 100644
--- a/drivers/input/touchscreen/mms114.c
+++ b/drivers/input/touchscreen/mms114.c
@@ -54,6 +54,7 @@
enum mms_type {
TYPE_MMS114 = 114,
TYPE_MMS152 = 152,
+ TYPE_MMS345L = 345,
};
struct mms114_data {
@@ -250,6 +251,15 @@ static int mms114_get_version(struct mms114_data *data)
int error;
switch (data->type) {
+ case TYPE_MMS345L:
+ error = __mms114_read_reg(data, MMS152_FW_REV, 3, buf);
+ if (error)
+ return error;
+
+ dev_info(dev, "TSP FW Rev: bootloader 0x%x / core 0x%x / config 0x%x\n",
+ buf[0], buf[1], buf[2]);
+ break;
+
case TYPE_MMS152:
error = __mms114_read_reg(data, MMS152_FW_REV, 3, buf);
if (error)
@@ -287,8 +297,8 @@ static int mms114_setup_regs(struct mms114_data *data)
if (error < 0)
return error;
- /* MMS152 has no configuration or power on registers */
- if (data->type == TYPE_MMS152)
+ /* Only MMS114 has configuration and power on registers */
+ if (data->type != TYPE_MMS114)
return 0;
error = mms114_set_active(data, true);
@@ -599,6 +609,9 @@ static const struct of_device_id mms114_dt_match[] = {
}, {
.compatible = "melfas,mms152",
.data = (void *)TYPE_MMS152,
+ }, {
+ .compatible = "melfas,mms345l",
+ .data = (void *)TYPE_MMS345L,
},
{ }
};
diff --git a/drivers/input/touchscreen/of_touchscreen.c b/drivers/input/touchscreen/of_touchscreen.c
index e16ec4c7043a..97342e14b4f1 100644
--- a/drivers/input/touchscreen/of_touchscreen.c
+++ b/drivers/input/touchscreen/of_touchscreen.c
@@ -66,7 +66,7 @@ void touchscreen_parse_properties(struct input_dev *input, bool multitouch,
{
struct device *dev = input->dev.parent;
struct input_absinfo *absinfo;
- unsigned int axis;
+ unsigned int axis, axis_x, axis_y;
unsigned int minimum, maximum, fuzz;
bool data_present;
@@ -74,33 +74,34 @@ void touchscreen_parse_properties(struct input_dev *input, bool multitouch,
if (!input->absinfo)
return;
- axis = multitouch ? ABS_MT_POSITION_X : ABS_X;
+ axis_x = multitouch ? ABS_MT_POSITION_X : ABS_X;
+ axis_y = multitouch ? ABS_MT_POSITION_Y : ABS_Y;
+
data_present = touchscreen_get_prop_u32(dev, "touchscreen-min-x",
- input_abs_get_min(input, axis),
+ input_abs_get_min(input, axis_x),
&minimum) |
touchscreen_get_prop_u32(dev, "touchscreen-size-x",
input_abs_get_max(input,
- axis) + 1,
+ axis_x) + 1,
&maximum) |
touchscreen_get_prop_u32(dev, "touchscreen-fuzz-x",
- input_abs_get_fuzz(input, axis),
+ input_abs_get_fuzz(input, axis_x),
&fuzz);
if (data_present)
- touchscreen_set_params(input, axis, minimum, maximum - 1, fuzz);
+ touchscreen_set_params(input, axis_x, minimum, maximum - 1, fuzz);
- axis = multitouch ? ABS_MT_POSITION_Y : ABS_Y;
data_present = touchscreen_get_prop_u32(dev, "touchscreen-min-y",
- input_abs_get_min(input, axis),
+ input_abs_get_min(input, axis_y),
&minimum) |
touchscreen_get_prop_u32(dev, "touchscreen-size-y",
input_abs_get_max(input,
- axis) + 1,
+ axis_y) + 1,
&maximum) |
touchscreen_get_prop_u32(dev, "touchscreen-fuzz-y",
- input_abs_get_fuzz(input, axis),
+ input_abs_get_fuzz(input, axis_y),
&fuzz);
if (data_present)
- touchscreen_set_params(input, axis, minimum, maximum - 1, fuzz);
+ touchscreen_set_params(input, axis_y, minimum, maximum - 1, fuzz);
axis = multitouch ? ABS_MT_PRESSURE : ABS_PRESSURE;
data_present = touchscreen_get_prop_u32(dev,
@@ -117,15 +118,13 @@ void touchscreen_parse_properties(struct input_dev *input, bool multitouch,
if (!prop)
return;
- axis = multitouch ? ABS_MT_POSITION_X : ABS_X;
-
- prop->max_x = input_abs_get_max(input, axis);
- prop->max_y = input_abs_get_max(input, axis + 1);
+ prop->max_x = input_abs_get_max(input, axis_x);
+ prop->max_y = input_abs_get_max(input, axis_y);
prop->invert_x =
device_property_read_bool(dev, "touchscreen-inverted-x");
if (prop->invert_x) {
- absinfo = &input->absinfo[axis];
+ absinfo = &input->absinfo[axis_x];
absinfo->maximum -= absinfo->minimum;
absinfo->minimum = 0;
}
@@ -133,7 +132,7 @@ void touchscreen_parse_properties(struct input_dev *input, bool multitouch,
prop->invert_y =
device_property_read_bool(dev, "touchscreen-inverted-y");
if (prop->invert_y) {
- absinfo = &input->absinfo[axis + 1];
+ absinfo = &input->absinfo[axis_y];
absinfo->maximum -= absinfo->minimum;
absinfo->minimum = 0;
}
@@ -141,7 +140,7 @@ void touchscreen_parse_properties(struct input_dev *input, bool multitouch,
prop->swap_x_y =
device_property_read_bool(dev, "touchscreen-swapped-x-y");
if (prop->swap_x_y)
- swap(input->absinfo[axis], input->absinfo[axis + 1]);
+ swap(input->absinfo[axis_x], input->absinfo[axis_y]);
}
EXPORT_SYMBOL(touchscreen_parse_properties);
generated by cgit v1.2.3 (git 2.39.0) at 2025-02-02 08:59:02 +0300