diff options
Diffstat (limited to 'drivers')
43 files changed, 1157 insertions, 1922 deletions
diff --git a/drivers/clk/imx/clk-imx27.c b/drivers/clk/imx/clk-imx27.c index a3753067fc12..5585ded8b8c6 100644 --- a/drivers/clk/imx/clk-imx27.c +++ b/drivers/clk/imx/clk-imx27.c @@ -181,79 +181,6 @@ static void __init _mx27_clocks_init(unsigned long fref) imx_print_silicon_rev("i.MX27", mx27_revision()); } -int __init mx27_clocks_init(unsigned long fref) -{ - ccm = ioremap(MX27_CCM_BASE_ADDR, SZ_4K); - - _mx27_clocks_init(fref); - - clk_register_clkdev(clk[IMX27_CLK_UART1_IPG_GATE], "ipg", "imx21-uart.0"); - clk_register_clkdev(clk[IMX27_CLK_PER1_GATE], "per", "imx21-uart.0"); - clk_register_clkdev(clk[IMX27_CLK_UART2_IPG_GATE], "ipg", "imx21-uart.1"); - clk_register_clkdev(clk[IMX27_CLK_PER1_GATE], "per", "imx21-uart.1"); - clk_register_clkdev(clk[IMX27_CLK_UART3_IPG_GATE], "ipg", "imx21-uart.2"); - clk_register_clkdev(clk[IMX27_CLK_PER1_GATE], "per", "imx21-uart.2"); - clk_register_clkdev(clk[IMX27_CLK_UART4_IPG_GATE], "ipg", "imx21-uart.3"); - clk_register_clkdev(clk[IMX27_CLK_PER1_GATE], "per", "imx21-uart.3"); - clk_register_clkdev(clk[IMX27_CLK_UART5_IPG_GATE], "ipg", "imx21-uart.4"); - clk_register_clkdev(clk[IMX27_CLK_PER1_GATE], "per", "imx21-uart.4"); - clk_register_clkdev(clk[IMX27_CLK_UART6_IPG_GATE], "ipg", "imx21-uart.5"); - clk_register_clkdev(clk[IMX27_CLK_PER1_GATE], "per", "imx21-uart.5"); - clk_register_clkdev(clk[IMX27_CLK_GPT1_IPG_GATE], "ipg", "imx-gpt.0"); - clk_register_clkdev(clk[IMX27_CLK_PER1_GATE], "per", "imx-gpt.0"); - clk_register_clkdev(clk[IMX27_CLK_PER2_GATE], "per", "imx21-mmc.0"); - clk_register_clkdev(clk[IMX27_CLK_SDHC1_IPG_GATE], "ipg", "imx21-mmc.0"); - clk_register_clkdev(clk[IMX27_CLK_PER2_GATE], "per", "imx21-mmc.1"); - clk_register_clkdev(clk[IMX27_CLK_SDHC2_IPG_GATE], "ipg", "imx21-mmc.1"); - clk_register_clkdev(clk[IMX27_CLK_PER2_GATE], "per", "imx21-mmc.2"); - clk_register_clkdev(clk[IMX27_CLK_SDHC2_IPG_GATE], "ipg", "imx21-mmc.2"); - clk_register_clkdev(clk[IMX27_CLK_PER2_GATE], "per", "imx27-cspi.0"); - clk_register_clkdev(clk[IMX27_CLK_CSPI1_IPG_GATE], "ipg", "imx27-cspi.0"); - clk_register_clkdev(clk[IMX27_CLK_PER2_GATE], "per", "imx27-cspi.1"); - clk_register_clkdev(clk[IMX27_CLK_CSPI2_IPG_GATE], "ipg", "imx27-cspi.1"); - clk_register_clkdev(clk[IMX27_CLK_PER2_GATE], "per", "imx27-cspi.2"); - clk_register_clkdev(clk[IMX27_CLK_CSPI3_IPG_GATE], "ipg", "imx27-cspi.2"); - clk_register_clkdev(clk[IMX27_CLK_PER3_GATE], "per", "imx21-fb.0"); - clk_register_clkdev(clk[IMX27_CLK_LCDC_IPG_GATE], "ipg", "imx21-fb.0"); - clk_register_clkdev(clk[IMX27_CLK_LCDC_AHB_GATE], "ahb", "imx21-fb.0"); - clk_register_clkdev(clk[IMX27_CLK_CSI_AHB_GATE], "ahb", "imx27-camera.0"); - clk_register_clkdev(clk[IMX27_CLK_PER4_GATE], "per", "imx27-camera.0"); - clk_register_clkdev(clk[IMX27_CLK_USB_DIV], "per", "imx-udc-mx27"); - clk_register_clkdev(clk[IMX27_CLK_USB_IPG_GATE], "ipg", "imx-udc-mx27"); - clk_register_clkdev(clk[IMX27_CLK_USB_AHB_GATE], "ahb", "imx-udc-mx27"); - clk_register_clkdev(clk[IMX27_CLK_USB_DIV], "per", "mxc-ehci.0"); - clk_register_clkdev(clk[IMX27_CLK_USB_IPG_GATE], "ipg", "mxc-ehci.0"); - clk_register_clkdev(clk[IMX27_CLK_USB_AHB_GATE], "ahb", "mxc-ehci.0"); - clk_register_clkdev(clk[IMX27_CLK_USB_DIV], "per", "mxc-ehci.1"); - clk_register_clkdev(clk[IMX27_CLK_USB_IPG_GATE], "ipg", "mxc-ehci.1"); - clk_register_clkdev(clk[IMX27_CLK_USB_AHB_GATE], "ahb", "mxc-ehci.1"); - clk_register_clkdev(clk[IMX27_CLK_USB_DIV], "per", "mxc-ehci.2"); - clk_register_clkdev(clk[IMX27_CLK_USB_IPG_GATE], "ipg", "mxc-ehci.2"); - clk_register_clkdev(clk[IMX27_CLK_USB_AHB_GATE], "ahb", "mxc-ehci.2"); - clk_register_clkdev(clk[IMX27_CLK_SSI1_IPG_GATE], NULL, "imx-ssi.0"); - clk_register_clkdev(clk[IMX27_CLK_SSI2_IPG_GATE], NULL, "imx-ssi.1"); - clk_register_clkdev(clk[IMX27_CLK_NFC_BAUD_GATE], NULL, "imx27-nand.0"); - clk_register_clkdev(clk[IMX27_CLK_VPU_BAUD_GATE], "per", "coda-imx27.0"); - clk_register_clkdev(clk[IMX27_CLK_VPU_AHB_GATE], "ahb", "coda-imx27.0"); - clk_register_clkdev(clk[IMX27_CLK_DMA_AHB_GATE], "ahb", "imx27-dma"); - clk_register_clkdev(clk[IMX27_CLK_DMA_IPG_GATE], "ipg", "imx27-dma"); - clk_register_clkdev(clk[IMX27_CLK_FEC_IPG_GATE], "ipg", "imx27-fec.0"); - clk_register_clkdev(clk[IMX27_CLK_FEC_AHB_GATE], "ahb", "imx27-fec.0"); - clk_register_clkdev(clk[IMX27_CLK_WDOG_IPG_GATE], NULL, "imx2-wdt.0"); - clk_register_clkdev(clk[IMX27_CLK_I2C1_IPG_GATE], NULL, "imx21-i2c.0"); - clk_register_clkdev(clk[IMX27_CLK_I2C2_IPG_GATE], NULL, "imx21-i2c.1"); - clk_register_clkdev(clk[IMX27_CLK_OWIRE_IPG_GATE], NULL, "mxc_w1.0"); - clk_register_clkdev(clk[IMX27_CLK_KPP_IPG_GATE], NULL, "imx-keypad"); - clk_register_clkdev(clk[IMX27_CLK_EMMA_AHB_GATE], "emma-ahb", "imx27-camera.0"); - clk_register_clkdev(clk[IMX27_CLK_EMMA_IPG_GATE], "emma-ipg", "imx27-camera.0"); - clk_register_clkdev(clk[IMX27_CLK_EMMA_AHB_GATE], "ahb", "m2m-emmaprp.0"); - clk_register_clkdev(clk[IMX27_CLK_EMMA_IPG_GATE], "ipg", "m2m-emmaprp.0"); - - mxc_timer_init(MX27_GPT1_BASE_ADDR, MX27_INT_GPT1, GPT_TYPE_IMX21); - - return 0; -} - static void __init mx27_clocks_init_dt(struct device_node *np) { struct device_node *refnp; diff --git a/drivers/clk/imx/clk-imx31.c b/drivers/clk/imx/clk-imx31.c index 4bb05e440cdd..7b13fb57d842 100644 --- a/drivers/clk/imx/clk-imx31.c +++ b/drivers/clk/imx/clk-imx31.c @@ -132,77 +132,6 @@ static void __init _mx31_clocks_init(void __iomem *base, unsigned long fref) clk_disable_unprepare(clk[iim_gate]); } -int __init mx31_clocks_init(unsigned long fref) -{ - void __iomem *base; - - base = ioremap(MX31_CCM_BASE_ADDR, SZ_4K); - if (!base) - panic("%s: failed to map registers\n", __func__); - - _mx31_clocks_init(base, fref); - - clk_register_clkdev(clk[gpt_gate], "per", "imx-gpt.0"); - clk_register_clkdev(clk[ipg], "ipg", "imx-gpt.0"); - clk_register_clkdev(clk[cspi1_gate], NULL, "imx31-cspi.0"); - clk_register_clkdev(clk[cspi2_gate], NULL, "imx31-cspi.1"); - clk_register_clkdev(clk[cspi3_gate], NULL, "imx31-cspi.2"); - clk_register_clkdev(clk[pwm_gate], "pwm", NULL); - clk_register_clkdev(clk[wdog_gate], NULL, "imx2-wdt.0"); - clk_register_clkdev(clk[ckil], "ref", "imx21-rtc"); - clk_register_clkdev(clk[rtc_gate], "ipg", "imx21-rtc"); - clk_register_clkdev(clk[epit1_gate], "epit", NULL); - clk_register_clkdev(clk[epit2_gate], "epit", NULL); - clk_register_clkdev(clk[nfc], NULL, "imx27-nand.0"); - clk_register_clkdev(clk[ipu_gate], NULL, "ipu-core"); - clk_register_clkdev(clk[ipu_gate], NULL, "mx3_sdc_fb"); - clk_register_clkdev(clk[kpp_gate], NULL, "imx-keypad"); - clk_register_clkdev(clk[usb_div_post], "per", "mxc-ehci.0"); - clk_register_clkdev(clk[usb_gate], "ahb", "mxc-ehci.0"); - clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.0"); - clk_register_clkdev(clk[usb_div_post], "per", "mxc-ehci.1"); - clk_register_clkdev(clk[usb_gate], "ahb", "mxc-ehci.1"); - clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.1"); - clk_register_clkdev(clk[usb_div_post], "per", "mxc-ehci.2"); - clk_register_clkdev(clk[usb_gate], "ahb", "mxc-ehci.2"); - clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.2"); - clk_register_clkdev(clk[usb_div_post], "per", "imx-udc-mx27"); - clk_register_clkdev(clk[usb_gate], "ahb", "imx-udc-mx27"); - clk_register_clkdev(clk[ipg], "ipg", "imx-udc-mx27"); - clk_register_clkdev(clk[csi_gate], NULL, "mx3-camera.0"); - /* i.mx31 has the i.mx21 type uart */ - clk_register_clkdev(clk[uart1_gate], "per", "imx21-uart.0"); - clk_register_clkdev(clk[ipg], "ipg", "imx21-uart.0"); - clk_register_clkdev(clk[uart2_gate], "per", "imx21-uart.1"); - clk_register_clkdev(clk[ipg], "ipg", "imx21-uart.1"); - clk_register_clkdev(clk[uart3_gate], "per", "imx21-uart.2"); - clk_register_clkdev(clk[ipg], "ipg", "imx21-uart.2"); - clk_register_clkdev(clk[uart4_gate], "per", "imx21-uart.3"); - clk_register_clkdev(clk[ipg], "ipg", "imx21-uart.3"); - clk_register_clkdev(clk[uart5_gate], "per", "imx21-uart.4"); - clk_register_clkdev(clk[ipg], "ipg", "imx21-uart.4"); - clk_register_clkdev(clk[i2c1_gate], NULL, "imx21-i2c.0"); - clk_register_clkdev(clk[i2c2_gate], NULL, "imx21-i2c.1"); - clk_register_clkdev(clk[i2c3_gate], NULL, "imx21-i2c.2"); - clk_register_clkdev(clk[owire_gate], NULL, "mxc_w1.0"); - clk_register_clkdev(clk[sdhc1_gate], NULL, "imx31-mmc.0"); - clk_register_clkdev(clk[sdhc2_gate], NULL, "imx31-mmc.1"); - clk_register_clkdev(clk[ssi1_gate], NULL, "imx-ssi.0"); - clk_register_clkdev(clk[ssi2_gate], NULL, "imx-ssi.1"); - clk_register_clkdev(clk[firi_gate], "firi", NULL); - clk_register_clkdev(clk[ata_gate], NULL, "pata_imx"); - clk_register_clkdev(clk[rtic_gate], "rtic", NULL); - clk_register_clkdev(clk[rng_gate], NULL, "mxc_rnga"); - clk_register_clkdev(clk[sdma_gate], NULL, "imx31-sdma"); - clk_register_clkdev(clk[iim_gate], "iim", NULL); - - - imx_register_uart_clocks(uart_clks); - mxc_timer_init(MX31_GPT1_BASE_ADDR, MX31_INT_GPT, GPT_TYPE_IMX31); - - return 0; -} - static void __init mx31_clocks_init_dt(struct device_node *np) { struct device_node *osc_np; diff --git a/drivers/clk/imx/clk-imx35.c b/drivers/clk/imx/clk-imx35.c index e595f559907f..c1df03665c09 100644 --- a/drivers/clk/imx/clk-imx35.c +++ b/drivers/clk/imx/clk-imx35.c @@ -248,74 +248,6 @@ static void __init _mx35_clocks_init(void) imx_print_silicon_rev("i.MX35", mx35_revision()); } -int __init mx35_clocks_init(void) -{ - _mx35_clocks_init(); - - clk_register_clkdev(clk[pata_gate], NULL, "pata_imx"); - clk_register_clkdev(clk[can1_gate], NULL, "flexcan.0"); - clk_register_clkdev(clk[can2_gate], NULL, "flexcan.1"); - clk_register_clkdev(clk[cspi1_gate], "per", "imx35-cspi.0"); - clk_register_clkdev(clk[cspi1_gate], "ipg", "imx35-cspi.0"); - clk_register_clkdev(clk[cspi2_gate], "per", "imx35-cspi.1"); - clk_register_clkdev(clk[cspi2_gate], "ipg", "imx35-cspi.1"); - clk_register_clkdev(clk[epit1_gate], NULL, "imx-epit.0"); - clk_register_clkdev(clk[epit2_gate], NULL, "imx-epit.1"); - clk_register_clkdev(clk[esdhc1_gate], "per", "sdhci-esdhc-imx35.0"); - clk_register_clkdev(clk[ipg], "ipg", "sdhci-esdhc-imx35.0"); - clk_register_clkdev(clk[ahb], "ahb", "sdhci-esdhc-imx35.0"); - clk_register_clkdev(clk[esdhc2_gate], "per", "sdhci-esdhc-imx35.1"); - clk_register_clkdev(clk[ipg], "ipg", "sdhci-esdhc-imx35.1"); - clk_register_clkdev(clk[ahb], "ahb", "sdhci-esdhc-imx35.1"); - clk_register_clkdev(clk[esdhc3_gate], "per", "sdhci-esdhc-imx35.2"); - clk_register_clkdev(clk[ipg], "ipg", "sdhci-esdhc-imx35.2"); - clk_register_clkdev(clk[ahb], "ahb", "sdhci-esdhc-imx35.2"); - /* i.mx35 has the i.mx27 type fec */ - clk_register_clkdev(clk[fec_gate], NULL, "imx27-fec.0"); - clk_register_clkdev(clk[gpt_gate], "per", "imx-gpt.0"); - clk_register_clkdev(clk[ipg], "ipg", "imx-gpt.0"); - clk_register_clkdev(clk[i2c1_gate], NULL, "imx21-i2c.0"); - clk_register_clkdev(clk[i2c2_gate], NULL, "imx21-i2c.1"); - clk_register_clkdev(clk[i2c3_gate], NULL, "imx21-i2c.2"); - clk_register_clkdev(clk[ipu_gate], NULL, "ipu-core"); - clk_register_clkdev(clk[ipu_gate], NULL, "mx3_sdc_fb"); - clk_register_clkdev(clk[kpp_gate], NULL, "imx-keypad"); - clk_register_clkdev(clk[owire_gate], NULL, "mxc_w1"); - clk_register_clkdev(clk[sdma_gate], NULL, "imx35-sdma"); - clk_register_clkdev(clk[ssi1_gate], NULL, "imx-ssi.0"); - clk_register_clkdev(clk[ssi2_gate], NULL, "imx-ssi.1"); - /* i.mx35 has the i.mx21 type uart */ - clk_register_clkdev(clk[uart1_gate], "per", "imx21-uart.0"); - clk_register_clkdev(clk[ipg], "ipg", "imx21-uart.0"); - clk_register_clkdev(clk[uart2_gate], "per", "imx21-uart.1"); - clk_register_clkdev(clk[ipg], "ipg", "imx21-uart.1"); - clk_register_clkdev(clk[uart3_gate], "per", "imx21-uart.2"); - clk_register_clkdev(clk[ipg], "ipg", "imx21-uart.2"); - /* i.mx35 has the i.mx21 type rtc */ - clk_register_clkdev(clk[ckil], "ref", "imx21-rtc"); - clk_register_clkdev(clk[rtc_gate], "ipg", "imx21-rtc"); - clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.0"); - clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.0"); - clk_register_clkdev(clk[usbotg_gate], "ahb", "mxc-ehci.0"); - clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.1"); - clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.1"); - clk_register_clkdev(clk[usbotg_gate], "ahb", "mxc-ehci.1"); - clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.2"); - clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.2"); - clk_register_clkdev(clk[usbotg_gate], "ahb", "mxc-ehci.2"); - clk_register_clkdev(clk[usb_div], "per", "imx-udc-mx27"); - clk_register_clkdev(clk[ipg], "ipg", "imx-udc-mx27"); - clk_register_clkdev(clk[usbotg_gate], "ahb", "imx-udc-mx27"); - clk_register_clkdev(clk[wdog_gate], NULL, "imx2-wdt.0"); - clk_register_clkdev(clk[nfc_div], NULL, "imx25-nand.0"); - clk_register_clkdev(clk[csi_gate], NULL, "mx3-camera.0"); - clk_register_clkdev(clk[admux_gate], "audmux", NULL); - - mxc_timer_init(MX35_GPT1_BASE_ADDR, MX35_INT_GPT, GPT_TYPE_IMX31); - - return 0; -} - static void __init mx35_clocks_init_dt(struct device_node *ccm_node) { _mx35_clocks_init(); diff --git a/drivers/clk/samsung/clk-s3c2410-dclk.c b/drivers/clk/samsung/clk-s3c2410-dclk.c index 7dad9098e897..f5e0a6ba2d12 100644 --- a/drivers/clk/samsung/clk-s3c2410-dclk.c +++ b/drivers/clk/samsung/clk-s3c2410-dclk.c @@ -11,13 +11,10 @@ #include <linux/clk-provider.h> #include <linux/io.h> #include <linux/platform_device.h> +#include <linux/platform_data/clk-s3c2410.h> #include <linux/module.h> #include "clk.h" -/* legacy access to misccr, until dt conversion is finished */ -#include <mach/hardware.h> -#include <mach/regs-gpio.h> - #define MUX_DCLK0 0 #define MUX_DCLK1 1 #define DIV_DCLK0 2 @@ -52,6 +49,7 @@ struct s3c24xx_clkout { struct clk_hw hw; u32 mask; u8 shift; + unsigned int (*modify_misccr)(unsigned int clr, unsigned int chg); }; #define to_s3c24xx_clkout(_hw) container_of(_hw, struct s3c24xx_clkout, hw) @@ -62,7 +60,7 @@ static u8 s3c24xx_clkout_get_parent(struct clk_hw *hw) int num_parents = clk_hw_get_num_parents(hw); u32 val; - val = readl_relaxed(S3C24XX_MISCCR) >> clkout->shift; + val = clkout->modify_misccr(0, 0) >> clkout->shift; val >>= clkout->shift; val &= clkout->mask; @@ -76,7 +74,7 @@ static int s3c24xx_clkout_set_parent(struct clk_hw *hw, u8 index) { struct s3c24xx_clkout *clkout = to_s3c24xx_clkout(hw); - s3c2410_modify_misccr((clkout->mask << clkout->shift), + clkout->modify_misccr((clkout->mask << clkout->shift), (index << clkout->shift)); return 0; @@ -92,10 +90,14 @@ static struct clk_hw *s3c24xx_register_clkout(struct device *dev, const char *name, const char **parent_names, u8 num_parents, u8 shift, u32 mask) { + struct s3c2410_clk_platform_data *pdata = dev_get_platdata(dev); struct s3c24xx_clkout *clkout; struct clk_init_data init; int ret; + if (!pdata) + return ERR_PTR(-EINVAL); + /* allocate the clkout */ clkout = kzalloc(sizeof(*clkout), GFP_KERNEL); if (!clkout) @@ -110,6 +112,7 @@ static struct clk_hw *s3c24xx_register_clkout(struct device *dev, clkout->shift = shift; clkout->mask = mask; clkout->hw.init = &init; + clkout->modify_misccr = pdata->modify_misccr; ret = clk_hw_register(dev, &clkout->hw); if (ret) diff --git a/drivers/clk/samsung/clk-s3c2410.c b/drivers/clk/samsung/clk-s3c2410.c index fcf6764693cc..5831d0606077 100644 --- a/drivers/clk/samsung/clk-s3c2410.c +++ b/drivers/clk/samsung/clk-s3c2410.c @@ -6,6 +6,7 @@ */ #include <linux/clk-provider.h> +#include <linux/clk/samsung.h> #include <linux/of.h> #include <linux/of_address.h> diff --git a/drivers/clk/samsung/clk-s3c2412.c b/drivers/clk/samsung/clk-s3c2412.c index a95ab5f75163..724ef642f048 100644 --- a/drivers/clk/samsung/clk-s3c2412.c +++ b/drivers/clk/samsung/clk-s3c2412.c @@ -6,6 +6,7 @@ */ #include <linux/clk-provider.h> +#include <linux/clk/samsung.h> #include <linux/io.h> #include <linux/of.h> #include <linux/of_address.h> diff --git a/drivers/clk/samsung/clk-s3c2443.c b/drivers/clk/samsung/clk-s3c2443.c index c7aba1e1af70..a827d63766d1 100644 --- a/drivers/clk/samsung/clk-s3c2443.c +++ b/drivers/clk/samsung/clk-s3c2443.c @@ -6,6 +6,7 @@ */ #include <linux/clk-provider.h> +#include <linux/clk/samsung.h> #include <linux/io.h> #include <linux/of.h> #include <linux/of_address.h> diff --git a/drivers/clk/samsung/clk-s3c64xx.c b/drivers/clk/samsung/clk-s3c64xx.c index b96d33e5eb45..56f95b63f71f 100644 --- a/drivers/clk/samsung/clk-s3c64xx.c +++ b/drivers/clk/samsung/clk-s3c64xx.c @@ -7,6 +7,7 @@ #include <linux/slab.h> #include <linux/clk-provider.h> +#include <linux/clk/samsung.h> #include <linux/of.h> #include <linux/of_address.h> diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm index bf5830eb664f..015ec0c02835 100644 --- a/drivers/cpufreq/Kconfig.arm +++ b/drivers/cpufreq/Kconfig.arm @@ -196,7 +196,6 @@ config ARM_S3C24XX_CPUFREQ_DEBUGFS config ARM_S3C2410_CPUFREQ bool depends on ARM_S3C24XX_CPUFREQ && CPU_S3C2410 - select S3C2410_CPUFREQ_UTILS help CPU Frequency scaling support for S3C2410 @@ -233,7 +232,6 @@ config ARM_S3C2416_CPUFREQ_VCORESCALE config ARM_S3C2440_CPUFREQ bool "S3C2440/S3C2442 CPU Frequency scaling support" depends on ARM_S3C24XX_CPUFREQ && (CPU_S3C2440 || CPU_S3C2442) - select S3C2410_CPUFREQ_UTILS default y help CPU Frequency scaling support for S3C2440 and S3C2442 SoC CPUs. diff --git a/drivers/cpufreq/s3c2410-cpufreq.c b/drivers/cpufreq/s3c2410-cpufreq.c index 0c4f2ccd7e22..5dcfbf0bfb74 100644 --- a/drivers/cpufreq/s3c2410-cpufreq.c +++ b/drivers/cpufreq/s3c2410-cpufreq.c @@ -16,14 +16,14 @@ #include <linux/clk.h> #include <linux/err.h> #include <linux/io.h> +#include <linux/soc/samsung/s3c-cpufreq-core.h> +#include <linux/soc/samsung/s3c-pm.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <mach/regs-clock.h> - -#include <plat/cpu.h> -#include <plat/cpu-freq-core.h> +#define S3C2410_CLKDIVN_PDIVN (1<<0) +#define S3C2410_CLKDIVN_HDIVN (1<<1) /* Note, 2410A has an extra mode for 1:4:4 ratio, bit 2 of CLKDIV */ @@ -37,7 +37,7 @@ static void s3c2410_cpufreq_setdivs(struct s3c_cpufreq_config *cfg) if (cfg->divs.p_divisor != cfg->divs.h_divisor) clkdiv |= S3C2410_CLKDIVN_PDIVN; - __raw_writel(clkdiv, S3C2410_CLKDIVN); + s3c24xx_write_clkdivn(clkdiv); } static int s3c2410_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg) diff --git a/drivers/cpufreq/s3c2412-cpufreq.c b/drivers/cpufreq/s3c2412-cpufreq.c index 53385a9ab957..5945945ead7c 100644 --- a/drivers/cpufreq/s3c2412-cpufreq.c +++ b/drivers/cpufreq/s3c2412-cpufreq.c @@ -19,15 +19,24 @@ #include <linux/clk.h> #include <linux/err.h> #include <linux/io.h> +#include <linux/soc/samsung/s3c-cpufreq-core.h> +#include <linux/soc/samsung/s3c-pm.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <mach/regs-clock.h> -#include <mach/s3c2412.h> - -#include <plat/cpu.h> -#include <plat/cpu-freq-core.h> +#define S3C2412_CLKDIVN_PDIVN (1<<2) +#define S3C2412_CLKDIVN_HDIVN_MASK (3<<0) +#define S3C2412_CLKDIVN_ARMDIVN (1<<3) +#define S3C2412_CLKDIVN_DVSEN (1<<4) +#define S3C2412_CLKDIVN_HALFHCLK (1<<5) +#define S3C2412_CLKDIVN_USB48DIV (1<<6) +#define S3C2412_CLKDIVN_UARTDIV_MASK (15<<8) +#define S3C2412_CLKDIVN_UARTDIV_SHIFT (8) +#define S3C2412_CLKDIVN_I2SDIV_MASK (15<<12) +#define S3C2412_CLKDIVN_I2SDIV_SHIFT (12) +#define S3C2412_CLKDIVN_CAMDIV_MASK (15<<16) +#define S3C2412_CLKDIVN_CAMDIV_SHIFT (16) /* our clock resources. */ static struct clk *xtal; @@ -117,7 +126,7 @@ static void s3c2412_cpufreq_setdivs(struct s3c_cpufreq_config *cfg) unsigned long clkdiv; unsigned long olddiv; - olddiv = clkdiv = __raw_readl(S3C2410_CLKDIVN); + olddiv = clkdiv = s3c24xx_read_clkdivn(); /* clear off current clock info */ @@ -134,32 +143,11 @@ static void s3c2412_cpufreq_setdivs(struct s3c_cpufreq_config *cfg) clkdiv |= S3C2412_CLKDIVN_PDIVN; s3c_freq_dbg("%s: div %08lx => %08lx\n", __func__, olddiv, clkdiv); - __raw_writel(clkdiv, S3C2410_CLKDIVN); + s3c24xx_write_clkdivn(clkdiv); clk_set_parent(armclk, cfg->divs.dvs ? hclk : fclk); } -static void s3c2412_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg) -{ - struct s3c_cpufreq_board *board = cfg->board; - unsigned long refresh; - - s3c_freq_dbg("%s: refresh %u ns, hclk %lu\n", __func__, - board->refresh, cfg->freq.hclk); - - /* Reduce both the refresh time (in ns) and the frequency (in MHz) - * by 10 each to ensure that we do not overflow 32 bit numbers. This - * should work for HCLK up to 133MHz and refresh period up to 30usec. - */ - - refresh = (board->refresh / 10); - refresh *= (cfg->freq.hclk / 100); - refresh /= (1 * 1000 * 1000); /* 10^6 */ - - s3c_freq_dbg("%s: setting refresh 0x%08lx\n", __func__, refresh); - __raw_writel(refresh, S3C2412_REFRESH); -} - /* set the default cpu frequency information, based on an 200MHz part * as we have no other way of detecting the speed rating in software. */ diff --git a/drivers/cpufreq/s3c2440-cpufreq.c b/drivers/cpufreq/s3c2440-cpufreq.c index 3f772ba8896e..148e8aedefa9 100644 --- a/drivers/cpufreq/s3c2440-cpufreq.c +++ b/drivers/cpufreq/s3c2440-cpufreq.c @@ -20,14 +20,27 @@ #include <linux/clk.h> #include <linux/err.h> #include <linux/io.h> +#include <linux/soc/samsung/s3c-cpufreq-core.h> +#include <linux/soc/samsung/s3c-pm.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <mach/regs-clock.h> +#define S3C2440_CLKDIVN_PDIVN (1<<0) +#define S3C2440_CLKDIVN_HDIVN_MASK (3<<1) +#define S3C2440_CLKDIVN_HDIVN_1 (0<<1) +#define S3C2440_CLKDIVN_HDIVN_2 (1<<1) +#define S3C2440_CLKDIVN_HDIVN_4_8 (2<<1) +#define S3C2440_CLKDIVN_HDIVN_3_6 (3<<1) +#define S3C2440_CLKDIVN_UCLK (1<<3) -#include <plat/cpu.h> -#include <plat/cpu-freq-core.h> +#define S3C2440_CAMDIVN_CAMCLK_MASK (0xf<<0) +#define S3C2440_CAMDIVN_CAMCLK_SEL (1<<4) +#define S3C2440_CAMDIVN_HCLK3_HALF (1<<8) +#define S3C2440_CAMDIVN_HCLK4_HALF (1<<9) +#define S3C2440_CAMDIVN_DVSEN (1<<12) + +#define S3C2442_CAMDIVN_CAMCLK_DIV3 (1<<5) static struct clk *xtal; static struct clk *fclk; @@ -143,8 +156,8 @@ static void s3c2440_cpufreq_setdivs(struct s3c_cpufreq_config *cfg) s3c_freq_dbg("%s: divisors: h=%d, p=%d\n", __func__, cfg->divs.h_divisor, cfg->divs.p_divisor); - clkdiv = __raw_readl(S3C2410_CLKDIVN); - camdiv = __raw_readl(S3C2440_CAMDIVN); + clkdiv = s3c24xx_read_clkdivn(); + camdiv = s3c2440_read_camdivn(); clkdiv &= ~(S3C2440_CLKDIVN_HDIVN_MASK | S3C2440_CLKDIVN_PDIVN); camdiv &= ~CAMDIVN_HCLK_HALF; @@ -184,11 +197,11 @@ static void s3c2440_cpufreq_setdivs(struct s3c_cpufreq_config *cfg) * then make a short delay and remove the hclk halving if necessary. */ - __raw_writel(camdiv | CAMDIVN_HCLK_HALF, S3C2440_CAMDIVN); - __raw_writel(clkdiv, S3C2410_CLKDIVN); + s3c2440_write_camdivn(camdiv | CAMDIVN_HCLK_HALF); + s3c24xx_write_clkdivn(clkdiv); ndelay(20); - __raw_writel(camdiv, S3C2440_CAMDIVN); + s3c2440_write_camdivn(camdiv); clk_set_parent(armclk, cfg->divs.dvs ? hclk : fclk); } diff --git a/drivers/cpufreq/s3c24xx-cpufreq-debugfs.c b/drivers/cpufreq/s3c24xx-cpufreq-debugfs.c index 290e3539d03e..93971dfe7c75 100644 --- a/drivers/cpufreq/s3c24xx-cpufreq-debugfs.c +++ b/drivers/cpufreq/s3c24xx-cpufreq-debugfs.c @@ -18,7 +18,7 @@ #include <linux/seq_file.h> #include <linux/err.h> -#include <plat/cpu-freq-core.h> +#include <linux/soc/samsung/s3c-cpufreq-core.h> static struct dentry *dbgfs_root; static struct dentry *dbgfs_file_io; diff --git a/drivers/cpufreq/s3c24xx-cpufreq.c b/drivers/cpufreq/s3c24xx-cpufreq.c index ed0e713b1b57..37efc0dc3f91 100644 --- a/drivers/cpufreq/s3c24xx-cpufreq.c +++ b/drivers/cpufreq/s3c24xx-cpufreq.c @@ -21,17 +21,13 @@ #include <linux/device.h> #include <linux/sysfs.h> #include <linux/slab.h> +#include <linux/soc/samsung/s3c-cpufreq-core.h> +#include <linux/soc/samsung/s3c-pm.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <plat/cpu.h> -#include <plat/cpu-freq-core.h> - -#include <mach/regs-clock.h> - /* note, cpufreq support deals in kHz, no Hz */ - static struct cpufreq_driver s3c24xx_driver; static struct s3c_cpufreq_config cpu_cur; static struct s3c_iotimings s3c24xx_iotiming; @@ -68,7 +64,7 @@ static void s3c_cpufreq_getcur(struct s3c_cpufreq_config *cfg) cfg->freq.pclk = pclk = clk_get_rate(clk_pclk); cfg->freq.armclk = armclk = clk_get_rate(clk_arm); - cfg->pll.driver_data = __raw_readl(S3C2410_MPLLCON); + cfg->pll.driver_data = s3c24xx_read_mpllcon(); cfg->pll.frequency = fclk; cfg->freq.hclk_tns = 1000000000 / (cfg->freq.hclk / 10); @@ -386,7 +382,7 @@ static unsigned int suspend_freq; static int s3c_cpufreq_suspend(struct cpufreq_policy *policy) { suspend_pll.frequency = clk_get_rate(_clk_mpll); - suspend_pll.driver_data = __raw_readl(S3C2410_MPLLCON); + suspend_pll.driver_data = s3c24xx_read_mpllcon(); suspend_freq = clk_get_rate(clk_arm); return 0; @@ -547,7 +543,7 @@ static void s3c_cpufreq_update_loctkime(void) val |= calc_locktime(rate, cpu_cur.info->locktime_m); pr_info("%s: new locktime is 0x%08x\n", __func__, val); - __raw_writel(val, S3C2410_LOCKTIME); + s3c24xx_write_locktime(val); } static int s3c_cpufreq_build_freq(void) diff --git a/drivers/hwmon/s3c-hwmon.c b/drivers/hwmon/s3c-hwmon.c index b490fe3d2ee8..f2703c5460d0 100644 --- a/drivers/hwmon/s3c-hwmon.c +++ b/drivers/hwmon/s3c-hwmon.c @@ -20,7 +20,7 @@ #include <linux/hwmon.h> #include <linux/hwmon-sysfs.h> -#include <plat/adc.h> +#include <linux/soc/samsung/s3c-adc.h> #include <linux/platform_data/hwmon-s3c.h> struct s3c_hwmon_attr { diff --git a/drivers/input/touchscreen/s3c2410_ts.c b/drivers/input/touchscreen/s3c2410_ts.c index 82920ff46f72..2e70c0b79444 100644 --- a/drivers/input/touchscreen/s3c2410_ts.c +++ b/drivers/input/touchscreen/s3c2410_ts.c @@ -20,10 +20,43 @@ #include <linux/clk.h> #include <linux/io.h> -#include <plat/adc.h> -#include <plat/regs-adc.h> +#include <linux/soc/samsung/s3c-adc.h> #include <linux/platform_data/touchscreen-s3c2410.h> +#define S3C2410_ADCCON (0x00) +#define S3C2410_ADCTSC (0x04) +#define S3C2410_ADCDLY (0x08) +#define S3C2410_ADCDAT0 (0x0C) +#define S3C2410_ADCDAT1 (0x10) +#define S3C64XX_ADCUPDN (0x14) +#define S3C2443_ADCMUX (0x18) +#define S3C64XX_ADCCLRINT (0x18) +#define S5P_ADCMUX (0x1C) +#define S3C64XX_ADCCLRINTPNDNUP (0x20) + +/* ADCTSC Register Bits */ +#define S3C2443_ADCTSC_UD_SEN (1 << 8) +#define S3C2410_ADCTSC_YM_SEN (1<<7) +#define S3C2410_ADCTSC_YP_SEN (1<<6) +#define S3C2410_ADCTSC_XM_SEN (1<<5) +#define S3C2410_ADCTSC_XP_SEN (1<<4) +#define S3C2410_ADCTSC_PULL_UP_DISABLE (1<<3) +#define S3C2410_ADCTSC_AUTO_PST (1<<2) +#define S3C2410_ADCTSC_XY_PST(x) (((x)&0x3)<<0) + +/* ADCDAT0 Bits */ +#define S3C2410_ADCDAT0_UPDOWN (1<<15) +#define S3C2410_ADCDAT0_AUTO_PST (1<<14) +#define S3C2410_ADCDAT0_XY_PST (0x3<<12) +#define S3C2410_ADCDAT0_XPDATA_MASK (0x03FF) + +/* ADCDAT1 Bits */ +#define S3C2410_ADCDAT1_UPDOWN (1<<15) +#define S3C2410_ADCDAT1_AUTO_PST (1<<14) +#define S3C2410_ADCDAT1_XY_PST (0x3<<12) +#define S3C2410_ADCDAT1_YPDATA_MASK (0x03FF) + + #define TSC_SLEEP (S3C2410_ADCTSC_PULL_UP_DISABLE | S3C2410_ADCTSC_XY_PST(0)) #define INT_DOWN (0) diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile index 80e3a84709ee..94c2885882ee 100644 --- a/drivers/irqchip/Makefile +++ b/drivers/irqchip/Makefile @@ -17,7 +17,6 @@ obj-$(CONFIG_ARCH_LPC32XX) += irq-lpc32xx.o obj-$(CONFIG_ARCH_MMP) += irq-mmp.o obj-$(CONFIG_IRQ_MXS) += irq-mxs.o obj-$(CONFIG_ARCH_TEGRA) += irq-tegra.o -obj-$(CONFIG_ARCH_S3C24XX) += irq-s3c24xx.o obj-$(CONFIG_DW_APB_ICTL) += irq-dw-apb-ictl.o obj-$(CONFIG_CLPS711X_IRQCHIP) += irq-clps711x.o obj-$(CONFIG_OMPIC) += irq-ompic.o diff --git a/drivers/irqchip/irq-s3c24xx.c b/drivers/irqchip/irq-s3c24xx.c deleted file mode 100644 index d2031fecc386..000000000000 --- a/drivers/irqchip/irq-s3c24xx.c +++ /dev/null @@ -1,1330 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * S3C24XX IRQ handling - * - * Copyright (c) 2003-2004 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * Copyright (c) 2012 Heiko Stuebner <heiko@sntech.de> -*/ - -#include <linux/init.h> -#include <linux/slab.h> -#include <linux/module.h> -#include <linux/io.h> -#include <linux/err.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/device.h> -#include <linux/irqdomain.h> -#include <linux/irqchip.h> -#include <linux/irqchip/chained_irq.h> -#include <linux/of.h> -#include <linux/of_irq.h> -#include <linux/of_address.h> - -#include <asm/exception.h> -#include <asm/mach/irq.h> - -#include <mach/regs-irq.h> -#include <mach/regs-gpio.h> - -#include <plat/cpu.h> -#include <plat/regs-irqtype.h> -#include <plat/pm.h> - -#define S3C_IRQTYPE_NONE 0 -#define S3C_IRQTYPE_EINT 1 -#define S3C_IRQTYPE_EDGE 2 -#define S3C_IRQTYPE_LEVEL 3 - -struct s3c_irq_data { - unsigned int type; - unsigned long offset; - unsigned long parent_irq; - - /* data gets filled during init */ - struct s3c_irq_intc *intc; - unsigned long sub_bits; - struct s3c_irq_intc *sub_intc; -}; - -/* - * Structure holding the controller data - * @reg_pending register holding pending irqs - * @reg_intpnd special register intpnd in main intc - * @reg_mask mask register - * @domain irq_domain of the controller - * @parent parent controller for ext and sub irqs - * @irqs irq-data, always s3c_irq_data[32] - */ -struct s3c_irq_intc { - void __iomem *reg_pending; - void __iomem *reg_intpnd; - void __iomem *reg_mask; - struct irq_domain *domain; - struct s3c_irq_intc *parent; - struct s3c_irq_data *irqs; -}; - -/* - * Array holding pointers to the global controller structs - * [0] ... main_intc - * [1] ... sub_intc - * [2] ... main_intc2 on s3c2416 - */ -static struct s3c_irq_intc *s3c_intc[3]; - -static void s3c_irq_mask(struct irq_data *data) -{ - struct s3c_irq_data *irq_data = irq_data_get_irq_chip_data(data); - struct s3c_irq_intc *intc = irq_data->intc; - struct s3c_irq_intc *parent_intc = intc->parent; - struct s3c_irq_data *parent_data; - unsigned long mask; - unsigned int irqno; - - mask = readl_relaxed(intc->reg_mask); - mask |= (1UL << irq_data->offset); - writel_relaxed(mask, intc->reg_mask); - - if (parent_intc) { - parent_data = &parent_intc->irqs[irq_data->parent_irq]; - - /* check to see if we need to mask the parent IRQ - * The parent_irq is always in main_intc, so the hwirq - * for find_mapping does not need an offset in any case. - */ - if ((mask & parent_data->sub_bits) == parent_data->sub_bits) { - irqno = irq_find_mapping(parent_intc->domain, - irq_data->parent_irq); - s3c_irq_mask(irq_get_irq_data(irqno)); - } - } -} - -static void s3c_irq_unmask(struct irq_data *data) -{ - struct s3c_irq_data *irq_data = irq_data_get_irq_chip_data(data); - struct s3c_irq_intc *intc = irq_data->intc; - struct s3c_irq_intc *parent_intc = intc->parent; - unsigned long mask; - unsigned int irqno; - - mask = readl_relaxed(intc->reg_mask); - mask &= ~(1UL << irq_data->offset); - writel_relaxed(mask, intc->reg_mask); - - if (parent_intc) { - irqno = irq_find_mapping(parent_intc->domain, - irq_data->parent_irq); - s3c_irq_unmask(irq_get_irq_data(irqno)); - } -} - -static inline void s3c_irq_ack(struct irq_data *data) -{ - struct s3c_irq_data *irq_data = irq_data_get_irq_chip_data(data); - struct s3c_irq_intc *intc = irq_data->intc; - unsigned long bitval = 1UL << irq_data->offset; - - writel_relaxed(bitval, intc->reg_pending); - if (intc->reg_intpnd) - writel_relaxed(bitval, intc->reg_intpnd); -} - -static int s3c_irq_type(struct irq_data *data, unsigned int type) -{ - switch (type) { - case IRQ_TYPE_NONE: - break; - case IRQ_TYPE_EDGE_RISING: - case IRQ_TYPE_EDGE_FALLING: - case IRQ_TYPE_EDGE_BOTH: - irq_set_handler(data->irq, handle_edge_irq); - break; - case IRQ_TYPE_LEVEL_LOW: - case IRQ_TYPE_LEVEL_HIGH: - irq_set_handler(data->irq, handle_level_irq); - break; - default: - pr_err("No such irq type %d\n", type); - return -EINVAL; - } - - return 0; -} - -static int s3c_irqext_type_set(void __iomem *gpcon_reg, - void __iomem *extint_reg, - unsigned long gpcon_offset, - unsigned long extint_offset, - unsigned int type) -{ - unsigned long newvalue = 0, value; - - /* Set the GPIO to external interrupt mode */ - value = readl_relaxed(gpcon_reg); - value = (value & ~(3 << gpcon_offset)) | (0x02 << gpcon_offset); - writel_relaxed(value, gpcon_reg); - - /* Set the external interrupt to pointed trigger type */ - switch (type) - { - case IRQ_TYPE_NONE: - pr_warn("No edge setting!\n"); - break; - - case IRQ_TYPE_EDGE_RISING: - newvalue = S3C2410_EXTINT_RISEEDGE; - break; - - case IRQ_TYPE_EDGE_FALLING: - newvalue = S3C2410_EXTINT_FALLEDGE; - break; - - case IRQ_TYPE_EDGE_BOTH: - newvalue = S3C2410_EXTINT_BOTHEDGE; - break; - - case IRQ_TYPE_LEVEL_LOW: - newvalue = S3C2410_EXTINT_LOWLEV; - break; - - case IRQ_TYPE_LEVEL_HIGH: - newvalue = S3C2410_EXTINT_HILEV; - break; - - default: - pr_err("No such irq type %d\n", type); - return -EINVAL; - } - - value = readl_relaxed(extint_reg); - value = (value & ~(7 << extint_offset)) | (newvalue << extint_offset); - writel_relaxed(value, extint_reg); - - return 0; -} - -static int s3c_irqext_type(struct irq_data *data, unsigned int type) -{ - void __iomem *extint_reg; - void __iomem *gpcon_reg; - unsigned long gpcon_offset, extint_offset; - - if ((data->hwirq >= 4) && (data->hwirq <= 7)) { - gpcon_reg = S3C2410_GPFCON; - extint_reg = S3C24XX_EXTINT0; - gpcon_offset = (data->hwirq) * 2; - extint_offset = (data->hwirq) * 4; - } else if ((data->hwirq >= 8) && (data->hwirq <= 15)) { - gpcon_reg = S3C2410_GPGCON; - extint_reg = S3C24XX_EXTINT1; - gpcon_offset = (data->hwirq - 8) * 2; - extint_offset = (data->hwirq - 8) * 4; - } else if ((data->hwirq >= 16) && (data->hwirq <= 23)) { - gpcon_reg = S3C2410_GPGCON; - extint_reg = S3C24XX_EXTINT2; - gpcon_offset = (data->hwirq - 8) * 2; - extint_offset = (data->hwirq - 16) * 4; - } else { - return -EINVAL; - } - - return s3c_irqext_type_set(gpcon_reg, extint_reg, gpcon_offset, - extint_offset, type); -} - -static int s3c_irqext0_type(struct irq_data *data, unsigned int type) -{ - void __iomem *extint_reg; - void __iomem *gpcon_reg; - unsigned long gpcon_offset, extint_offset; - - if (data->hwirq <= 3) { - gpcon_reg = S3C2410_GPFCON; - extint_reg = S3C24XX_EXTINT0; - gpcon_offset = (data->hwirq) * 2; - extint_offset = (data->hwirq) * 4; - } else { - return -EINVAL; - } - - return s3c_irqext_type_set(gpcon_reg, extint_reg, gpcon_offset, - extint_offset, type); -} - -static struct irq_chip s3c_irq_chip = { - .name = "s3c", - .irq_ack = s3c_irq_ack, - .irq_mask = s3c_irq_mask, - .irq_unmask = s3c_irq_unmask, - .irq_set_type = s3c_irq_type, - .irq_set_wake = s3c_irq_wake -}; - -static struct irq_chip s3c_irq_level_chip = { - .name = "s3c-level", - .irq_mask = s3c_irq_mask, - .irq_unmask = s3c_irq_unmask, - .irq_ack = s3c_irq_ack, - .irq_set_type = s3c_irq_type, -}; - -static struct irq_chip s3c_irqext_chip = { - .name = "s3c-ext", - .irq_mask = s3c_irq_mask, - .irq_unmask = s3c_irq_unmask, - .irq_ack = s3c_irq_ack, - .irq_set_type = s3c_irqext_type, - .irq_set_wake = s3c_irqext_wake -}; - -static struct irq_chip s3c_irq_eint0t4 = { - .name = "s3c-ext0", - .irq_ack = s3c_irq_ack, - .irq_mask = s3c_irq_mask, - .irq_unmask = s3c_irq_unmask, - .irq_set_wake = s3c_irq_wake, - .irq_set_type = s3c_irqext0_type, -}; - -static void s3c_irq_demux(struct irq_desc *desc) -{ - struct irq_chip *chip = irq_desc_get_chip(desc); - struct s3c_irq_data *irq_data = irq_desc_get_chip_data(desc); - struct s3c_irq_intc *intc = irq_data->intc; - struct s3c_irq_intc *sub_intc = irq_data->sub_intc; - unsigned int n, offset, irq; - unsigned long src, msk; - - /* we're using individual domains for the non-dt case - * and one big domain for the dt case where the subintc - * starts at hwirq number 32. - */ - offset = irq_domain_get_of_node(intc->domain) ? 32 : 0; - - chained_irq_enter(chip, desc); - - src = readl_relaxed(sub_intc->reg_pending); - msk = readl_relaxed(sub_intc->reg_mask); - - src &= ~msk; - src &= irq_data->sub_bits; - - while (src) { - n = __ffs(src); - src &= ~(1 << n); - irq = irq_find_mapping(sub_intc->domain, offset + n); - generic_handle_irq(irq); - } - - chained_irq_exit(chip, desc); -} - -static inline int s3c24xx_handle_intc(struct s3c_irq_intc *intc, - struct pt_regs *regs, int intc_offset) -{ - int pnd; - int offset; - - pnd = readl_relaxed(intc->reg_intpnd); - if (!pnd) - return false; - - /* non-dt machines use individual domains */ - if (!irq_domain_get_of_node(intc->domain)) - intc_offset = 0; - - /* We have a problem that the INTOFFSET register does not always - * show one interrupt. Occasionally we get two interrupts through - * the prioritiser, and this causes the INTOFFSET register to show - * what looks like the logical-or of the two interrupt numbers. - * - * Thanks to Klaus, Shannon, et al for helping to debug this problem - */ - offset = readl_relaxed(intc->reg_intpnd + 4); - - /* Find the bit manually, when the offset is wrong. - * The pending register only ever contains the one bit of the next - * interrupt to handle. - */ - if (!(pnd & (1 << offset))) - offset = __ffs(pnd); - - handle_domain_irq(intc->domain, intc_offset + offset, regs); - return true; -} - -asmlinkage void __exception_irq_entry s3c24xx_handle_irq(struct pt_regs *regs) -{ - do { - if (likely(s3c_intc[0])) - if (s3c24xx_handle_intc(s3c_intc[0], regs, 0)) - continue; - - if (s3c_intc[2]) - if (s3c24xx_handle_intc(s3c_intc[2], regs, 64)) - continue; - - break; - } while (1); -} - -#ifdef CONFIG_FIQ -/** - * s3c24xx_set_fiq - set the FIQ routing - * @irq: IRQ number to route to FIQ on processor. - * @on: Whether to route @irq to the FIQ, or to remove the FIQ routing. - * - * Change the state of the IRQ to FIQ routing depending on @irq and @on. If - * @on is true, the @irq is checked to see if it can be routed and the - * interrupt controller updated to route the IRQ. If @on is false, the FIQ - * routing is cleared, regardless of which @irq is specified. - */ -int s3c24xx_set_fiq(unsigned int irq, bool on) -{ - u32 intmod; - unsigned offs; - - if (on) { - offs = irq - FIQ_START; - if (offs > 31) - return -EINVAL; - - intmod = 1 << offs; - } else { - intmod = 0; - } - - writel_relaxed(intmod, S3C2410_INTMOD); - return 0; -} - -EXPORT_SYMBOL_GPL(s3c24xx_set_fiq); -#endif - -static int s3c24xx_irq_map(struct irq_domain *h, unsigned int virq, - irq_hw_number_t hw) -{ - struct s3c_irq_intc *intc = h->host_data; - struct s3c_irq_data *irq_data = &intc->irqs[hw]; - struct s3c_irq_intc *parent_intc; - struct s3c_irq_data *parent_irq_data; - unsigned int irqno; - - /* attach controller pointer to irq_data */ - irq_data->intc = intc; - irq_data->offset = hw; - - parent_intc = intc->parent; - - /* set handler and flags */ - switch (irq_data->type) { - case S3C_IRQTYPE_NONE: - return 0; - case S3C_IRQTYPE_EINT: - /* On the S3C2412, the EINT0to3 have a parent irq - * but need the s3c_irq_eint0t4 chip - */ - if (parent_intc && (!soc_is_s3c2412() || hw >= 4)) - irq_set_chip_and_handler(virq, &s3c_irqext_chip, - handle_edge_irq); - else - irq_set_chip_and_handler(virq, &s3c_irq_eint0t4, - handle_edge_irq); - break; - case S3C_IRQTYPE_EDGE: - if (parent_intc || intc->reg_pending == S3C2416_SRCPND2) - irq_set_chip_and_handler(virq, &s3c_irq_level_chip, - handle_edge_irq); - else - irq_set_chip_and_handler(virq, &s3c_irq_chip, - handle_edge_irq); - break; - case S3C_IRQTYPE_LEVEL: - if (parent_intc) - irq_set_chip_and_handler(virq, &s3c_irq_level_chip, - handle_level_irq); - else - irq_set_chip_and_handler(virq, &s3c_irq_chip, - handle_level_irq); - break; - default: - pr_err("irq-s3c24xx: unsupported irqtype %d\n", irq_data->type); - return -EINVAL; - } - - irq_set_chip_data(virq, irq_data); - - if (parent_intc && irq_data->type != S3C_IRQTYPE_NONE) { - if (irq_data->parent_irq > 31) { - pr_err("irq-s3c24xx: parent irq %lu is out of range\n", - irq_data->parent_irq); - return -EINVAL; - } - - parent_irq_data = &parent_intc->irqs[irq_data->parent_irq]; - parent_irq_data->sub_intc = intc; - parent_irq_data->sub_bits |= (1UL << hw); - - /* attach the demuxer to the parent irq */ - irqno = irq_find_mapping(parent_intc->domain, - irq_data->parent_irq); - if (!irqno) { - pr_err("irq-s3c24xx: could not find mapping for parent irq %lu\n", - irq_data->parent_irq); - return -EINVAL; - } - irq_set_chained_handler(irqno, s3c_irq_demux); - } - - return 0; -} - -static const struct irq_domain_ops s3c24xx_irq_ops = { - .map = s3c24xx_irq_map, - .xlate = irq_domain_xlate_twocell, -}; - -static void s3c24xx_clear_intc(struct s3c_irq_intc *intc) -{ - void __iomem *reg_source; - unsigned long pend; - unsigned long last; - int i; - - /* if intpnd is set, read the next pending irq from there */ - reg_source = intc->reg_intpnd ? intc->reg_intpnd : intc->reg_pending; - - last = 0; - for (i = 0; i < 4; i++) { - pend = readl_relaxed(reg_source); - - if (pend == 0 || pend == last) - break; - - writel_relaxed(pend, intc->reg_pending); - if (intc->reg_intpnd) - writel_relaxed(pend, intc->reg_intpnd); - - pr_info("irq: clearing pending status %08x\n", (int)pend); - last = pend; - } -} - -static struct s3c_irq_intc * __init s3c24xx_init_intc(struct device_node *np, - struct s3c_irq_data *irq_data, - struct s3c_irq_intc *parent, - unsigned long address) -{ - struct s3c_irq_intc *intc; - void __iomem *base = (void *)0xf6000000; /* static mapping */ - int irq_num; - int irq_start; - int ret; - - intc = kzalloc(sizeof(struct s3c_irq_intc), GFP_KERNEL); - if (!intc) - return ERR_PTR(-ENOMEM); - - intc->irqs = irq_data; - - if (parent) - intc->parent = parent; - - /* select the correct data for the controller. - * Need to hard code the irq num start and offset - * to preserve the static mapping for now - */ - switch (address) { - case 0x4a000000: - pr_debug("irq: found main intc\n"); - intc->reg_pending = base; - intc->reg_mask = base + 0x08; - intc->reg_intpnd = base + 0x10; - irq_num = 32; - irq_start = S3C2410_IRQ(0); - break; - case 0x4a000018: - pr_debug("irq: found subintc\n"); - intc->reg_pending = base + 0x18; - intc->reg_mask = base + 0x1c; - irq_num = 29; - irq_start = S3C2410_IRQSUB(0); - break; - case 0x4a000040: - pr_debug("irq: found intc2\n"); - intc->reg_pending = base + 0x40; - intc->reg_mask = base + 0x48; - intc->reg_intpnd = base + 0x50; - irq_num = 8; - irq_start = S3C2416_IRQ(0); - break; - case 0x560000a4: - pr_debug("irq: found eintc\n"); - base = (void *)0xfd000000; - - intc->reg_mask = base + 0xa4; - intc->reg_pending = base + 0xa8; - irq_num = 24; - irq_start = S3C2410_IRQ(32); - break; - default: - pr_err("irq: unsupported controller address\n"); - ret = -EINVAL; - goto err; - } - - /* now that all the data is complete, init the irq-domain */ - s3c24xx_clear_intc(intc); - intc->domain = irq_domain_add_legacy(np, irq_num, irq_start, - 0, &s3c24xx_irq_ops, - intc); - if (!intc->domain) { - pr_err("irq: could not create irq-domain\n"); - ret = -EINVAL; - goto err; - } - - set_handle_irq(s3c24xx_handle_irq); - - return intc; - -err: - kfree(intc); - return ERR_PTR(ret); -} - -static struct s3c_irq_data __maybe_unused init_eint[32] = { - { .type = S3C_IRQTYPE_NONE, }, /* reserved */ - { .type = S3C_IRQTYPE_NONE, }, /* reserved */ - { .type = S3C_IRQTYPE_NONE, }, /* reserved */ - { .type = S3C_IRQTYPE_NONE, }, /* reserved */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT4 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT5 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT6 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT7 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT8 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT9 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT10 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT11 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT12 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT13 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT14 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT15 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT16 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT17 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT18 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT19 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT20 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT21 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT22 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT23 */ -}; - -#ifdef CONFIG_CPU_S3C2410 -static struct s3c_irq_data init_s3c2410base[32] = { - { .type = S3C_IRQTYPE_EINT, }, /* EINT0 */ - { .type = S3C_IRQTYPE_EINT, }, /* EINT1 */ - { .type = S3C_IRQTYPE_EINT, }, /* EINT2 */ - { .type = S3C_IRQTYPE_EINT, }, /* EINT3 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* EINT4to7 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* EINT8to23 */ - { .type = S3C_IRQTYPE_NONE, }, /* reserved */ - { .type = S3C_IRQTYPE_EDGE, }, /* nBATT_FLT */ - { .type = S3C_IRQTYPE_EDGE, }, /* TICK */ - { .type = S3C_IRQTYPE_EDGE, }, /* WDT */ - { .type = S3C_IRQTYPE_EDGE, }, /* TIMER0 */ - { .type = S3C_IRQTYPE_EDGE, }, /* TIMER1 */ - { .type = S3C_IRQTYPE_EDGE, }, /* TIMER2 */ - { .type = S3C_IRQTYPE_EDGE, }, /* TIMER3 */ - { .type = S3C_IRQTYPE_EDGE, }, /* TIMER4 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* UART2 */ - { .type = S3C_IRQTYPE_EDGE, }, /* LCD */ - { .type = S3C_IRQTYPE_EDGE, }, /* DMA0 */ - { .type = S3C_IRQTYPE_EDGE, }, /* DMA1 */ - { .type = S3C_IRQTYPE_EDGE, }, /* DMA2 */ - { .type = S3C_IRQTYPE_EDGE, }, /* DMA3 */ - { .type = S3C_IRQTYPE_EDGE, }, /* SDI */ - { .type = S3C_IRQTYPE_EDGE, }, /* SPI0 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* UART1 */ - { .type = S3C_IRQTYPE_NONE, }, /* reserved */ - { .type = S3C_IRQTYPE_EDGE, }, /* USBD */ - { .type = S3C_IRQTYPE_EDGE, }, /* USBH */ - { .type = S3C_IRQTYPE_EDGE, }, /* IIC */ - { .type = S3C_IRQTYPE_LEVEL, }, /* UART0 */ - { .type = S3C_IRQTYPE_EDGE, }, /* SPI1 */ - { .type = S3C_IRQTYPE_EDGE, }, /* RTC */ - { .type = S3C_IRQTYPE_LEVEL, }, /* ADCPARENT */ -}; - -static struct s3c_irq_data init_s3c2410subint[32] = { - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-RX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-TX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-ERR */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-RX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-TX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-ERR */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-RX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-TX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */ - { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* TC */ - { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */ -}; - -void __init s3c2410_init_irq(void) -{ -#ifdef CONFIG_FIQ - init_FIQ(FIQ_START); -#endif - - s3c_intc[0] = s3c24xx_init_intc(NULL, &init_s3c2410base[0], NULL, - 0x4a000000); - if (IS_ERR(s3c_intc[0])) { - pr_err("irq: could not create main interrupt controller\n"); - return; - } - - s3c_intc[1] = s3c24xx_init_intc(NULL, &init_s3c2410subint[0], - s3c_intc[0], 0x4a000018); - s3c24xx_init_intc(NULL, &init_eint[0], s3c_intc[0], 0x560000a4); -} -#endif - -#ifdef CONFIG_CPU_S3C2412 -static struct s3c_irq_data init_s3c2412base[32] = { - { .type = S3C_IRQTYPE_LEVEL, }, /* EINT0 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* EINT1 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* EINT2 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* EINT3 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* EINT4to7 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* EINT8to23 */ - { .type = S3C_IRQTYPE_NONE, }, /* reserved */ - { .type = S3C_IRQTYPE_EDGE, }, /* nBATT_FLT */ - { .type = S3C_IRQTYPE_EDGE, }, /* TICK */ - { .type = S3C_IRQTYPE_EDGE, }, /* WDT */ - { .type = S3C_IRQTYPE_EDGE, }, /* TIMER0 */ - { .type = S3C_IRQTYPE_EDGE, }, /* TIMER1 */ - { .type = S3C_IRQTYPE_EDGE, }, /* TIMER2 */ - { .type = S3C_IRQTYPE_EDGE, }, /* TIMER3 */ - { .type = S3C_IRQTYPE_EDGE, }, /* TIMER4 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* UART2 */ - { .type = S3C_IRQTYPE_EDGE, }, /* LCD */ - { .type = S3C_IRQTYPE_EDGE, }, /* DMA0 */ - { .type = S3C_IRQTYPE_EDGE, }, /* DMA1 */ - { .type = S3C_IRQTYPE_EDGE, }, /* DMA2 */ - { .type = S3C_IRQTYPE_EDGE, }, /* DMA3 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* SDI/CF */ - { .type = S3C_IRQTYPE_EDGE, }, /* SPI0 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* UART1 */ - { .type = S3C_IRQTYPE_NONE, }, /* reserved */ - { .type = S3C_IRQTYPE_EDGE, }, /* USBD */ - { .type = S3C_IRQTYPE_EDGE, }, /* USBH */ - { .type = S3C_IRQTYPE_EDGE, }, /* IIC */ - { .type = S3C_IRQTYPE_LEVEL, }, /* UART0 */ - { .type = S3C_IRQTYPE_EDGE, }, /* SPI1 */ - { .type = S3C_IRQTYPE_EDGE, }, /* RTC */ - { .type = S3C_IRQTYPE_LEVEL, }, /* ADCPARENT */ -}; - -static struct s3c_irq_data init_s3c2412eint[32] = { - { .type = S3C_IRQTYPE_EINT, .parent_irq = 0 }, /* EINT0 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 1 }, /* EINT1 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 2 }, /* EINT2 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 3 }, /* EINT3 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT4 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT5 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT6 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT7 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT8 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT9 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT10 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT11 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT12 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT13 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT14 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT15 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT16 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT17 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT18 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT19 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT20 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT21 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT22 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT23 */ -}; - -static struct s3c_irq_data init_s3c2412subint[32] = { - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-RX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-TX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-ERR */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-RX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-TX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-ERR */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-RX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-TX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */ - { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* TC */ - { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */ - { .type = S3C_IRQTYPE_NONE, }, - { .type = S3C_IRQTYPE_NONE, }, - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 21 }, /* SDI */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 21 }, /* CF */ -}; - -void __init s3c2412_init_irq(void) -{ - pr_info("S3C2412: IRQ Support\n"); - -#ifdef CONFIG_FIQ - init_FIQ(FIQ_START); -#endif - - s3c_intc[0] = s3c24xx_init_intc(NULL, &init_s3c2412base[0], NULL, - 0x4a000000); - if (IS_ERR(s3c_intc[0])) { - pr_err("irq: could not create main interrupt controller\n"); - return; - } - - s3c24xx_init_intc(NULL, &init_s3c2412eint[0], s3c_intc[0], 0x560000a4); - s3c_intc[1] = s3c24xx_init_intc(NULL, &init_s3c2412subint[0], - s3c_intc[0], 0x4a000018); -} -#endif - -#ifdef CONFIG_CPU_S3C2416 -static struct s3c_irq_data init_s3c2416base[32] = { - { .type = S3C_IRQTYPE_EINT, }, /* EINT0 */ - { .type = S3C_IRQTYPE_EINT, }, /* EINT1 */ - { .type = S3C_IRQTYPE_EINT, }, /* EINT2 */ - { .type = S3C_IRQTYPE_EINT, }, /* EINT3 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* EINT4to7 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* EINT8to23 */ - { .type = S3C_IRQTYPE_NONE, }, /* reserved */ - { .type = S3C_IRQTYPE_EDGE, }, /* nBATT_FLT */ - { .type = S3C_IRQTYPE_EDGE, }, /* TICK */ - { .type = S3C_IRQTYPE_LEVEL, }, /* WDT/AC97 */ - { .type = S3C_IRQTYPE_EDGE, }, /* TIMER0 */ - { .type = S3C_IRQTYPE_EDGE, }, /* TIMER1 */ - { .type = S3C_IRQTYPE_EDGE, }, /* TIMER2 */ - { .type = S3C_IRQTYPE_EDGE, }, /* TIMER3 */ - { .type = S3C_IRQTYPE_EDGE, }, /* TIMER4 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* UART2 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* LCD */ - { .type = S3C_IRQTYPE_LEVEL, }, /* DMA */ - { .type = S3C_IRQTYPE_LEVEL, }, /* UART3 */ - { .type = S3C_IRQTYPE_NONE, }, /* reserved */ - { .type = S3C_IRQTYPE_EDGE, }, /* SDI1 */ - { .type = S3C_IRQTYPE_EDGE, }, /* SDI0 */ - { .type = S3C_IRQTYPE_EDGE, }, /* SPI0 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* UART1 */ - { .type = S3C_IRQTYPE_EDGE, }, /* NAND */ - { .type = S3C_IRQTYPE_EDGE, }, /* USBD */ - { .type = S3C_IRQTYPE_EDGE, }, /* USBH */ - { .type = S3C_IRQTYPE_EDGE, }, /* IIC */ - { .type = S3C_IRQTYPE_LEVEL, }, /* UART0 */ - { .type = S3C_IRQTYPE_NONE, }, - { .type = S3C_IRQTYPE_EDGE, }, /* RTC */ - { .type = S3C_IRQTYPE_LEVEL, }, /* ADCPARENT */ -}; - -static struct s3c_irq_data init_s3c2416subint[32] = { - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-RX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-TX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-ERR */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-RX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-TX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-ERR */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-RX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-TX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */ - { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* TC */ - { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */ - { .type = S3C_IRQTYPE_NONE }, /* reserved */ - { .type = S3C_IRQTYPE_NONE }, /* reserved */ - { .type = S3C_IRQTYPE_NONE }, /* reserved */ - { .type = S3C_IRQTYPE_NONE }, /* reserved */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD2 */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD3 */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD4 */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA0 */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA1 */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA2 */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA3 */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA4 */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA5 */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-RX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-TX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-ERR */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* WDT */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* AC97 */ -}; - -static struct s3c_irq_data init_s3c2416_second[32] = { - { .type = S3C_IRQTYPE_EDGE }, /* 2D */ - { .type = S3C_IRQTYPE_NONE }, /* reserved */ - { .type = S3C_IRQTYPE_NONE }, /* reserved */ - { .type = S3C_IRQTYPE_NONE }, /* reserved */ - { .type = S3C_IRQTYPE_EDGE }, /* PCM0 */ - { .type = S3C_IRQTYPE_NONE }, /* reserved */ - { .type = S3C_IRQTYPE_EDGE }, /* I2S0 */ -}; - -void __init s3c2416_init_irq(void) -{ - pr_info("S3C2416: IRQ Support\n"); - -#ifdef CONFIG_FIQ - init_FIQ(FIQ_START); -#endif - - s3c_intc[0] = s3c24xx_init_intc(NULL, &init_s3c2416base[0], NULL, - 0x4a000000); - if (IS_ERR(s3c_intc[0])) { - pr_err("irq: could not create main interrupt controller\n"); - return; - } - - s3c24xx_init_intc(NULL, &init_eint[0], s3c_intc[0], 0x560000a4); - s3c_intc[1] = s3c24xx_init_intc(NULL, &init_s3c2416subint[0], - s3c_intc[0], 0x4a000018); - - s3c_intc[2] = s3c24xx_init_intc(NULL, &init_s3c2416_second[0], - NULL, 0x4a000040); -} - -#endif - -#ifdef CONFIG_CPU_S3C2440 -static struct s3c_irq_data init_s3c2440base[32] = { - { .type = S3C_IRQTYPE_EINT, }, /* EINT0 */ - { .type = S3C_IRQTYPE_EINT, }, /* EINT1 */ - { .type = S3C_IRQTYPE_EINT, }, /* EINT2 */ - { .type = S3C_IRQTYPE_EINT, }, /* EINT3 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* EINT4to7 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* EINT8to23 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* CAM */ - { .type = S3C_IRQTYPE_EDGE, }, /* nBATT_FLT */ - { .type = S3C_IRQTYPE_EDGE, }, /* TICK */ - { .type = S3C_IRQTYPE_LEVEL, }, /* WDT/AC97 */ - { .type = S3C_IRQTYPE_EDGE, }, /* TIMER0 */ - { .type = S3C_IRQTYPE_EDGE, }, /* TIMER1 */ - { .type = S3C_IRQTYPE_EDGE, }, /* TIMER2 */ - { .type = S3C_IRQTYPE_EDGE, }, /* TIMER3 */ - { .type = S3C_IRQTYPE_EDGE, }, /* TIMER4 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* UART2 */ - { .type = S3C_IRQTYPE_EDGE, }, /* LCD */ - { .type = S3C_IRQTYPE_EDGE, }, /* DMA0 */ - { .type = S3C_IRQTYPE_EDGE, }, /* DMA1 */ - { .type = S3C_IRQTYPE_EDGE, }, /* DMA2 */ - { .type = S3C_IRQTYPE_EDGE, }, /* DMA3 */ - { .type = S3C_IRQTYPE_EDGE, }, /* SDI */ - { .type = S3C_IRQTYPE_EDGE, }, /* SPI0 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* UART1 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* NFCON */ - { .type = S3C_IRQTYPE_EDGE, }, /* USBD */ - { .type = S3C_IRQTYPE_EDGE, }, /* USBH */ - { .type = S3C_IRQTYPE_EDGE, }, /* IIC */ - { .type = S3C_IRQTYPE_LEVEL, }, /* UART0 */ - { .type = S3C_IRQTYPE_EDGE, }, /* SPI1 */ - { .type = S3C_IRQTYPE_EDGE, }, /* RTC */ - { .type = S3C_IRQTYPE_LEVEL, }, /* ADCPARENT */ -}; - -static struct s3c_irq_data init_s3c2440subint[32] = { - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-RX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-TX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-ERR */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-RX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-TX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-ERR */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-RX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-TX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */ - { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* TC */ - { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* CAM_C */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* CAM_P */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* WDT */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* AC97 */ -}; - -void __init s3c2440_init_irq(void) -{ - pr_info("S3C2440: IRQ Support\n"); - -#ifdef CONFIG_FIQ - init_FIQ(FIQ_START); -#endif - - s3c_intc[0] = s3c24xx_init_intc(NULL, &init_s3c2440base[0], NULL, - 0x4a000000); - if (IS_ERR(s3c_intc[0])) { - pr_err("irq: could not create main interrupt controller\n"); - return; - } - - s3c24xx_init_intc(NULL, &init_eint[0], s3c_intc[0], 0x560000a4); - s3c_intc[1] = s3c24xx_init_intc(NULL, &init_s3c2440subint[0], - s3c_intc[0], 0x4a000018); -} -#endif - -#ifdef CONFIG_CPU_S3C2442 -static struct s3c_irq_data init_s3c2442base[32] = { - { .type = S3C_IRQTYPE_EINT, }, /* EINT0 */ - { .type = S3C_IRQTYPE_EINT, }, /* EINT1 */ - { .type = S3C_IRQTYPE_EINT, }, /* EINT2 */ - { .type = S3C_IRQTYPE_EINT, }, /* EINT3 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* EINT4to7 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* EINT8to23 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* CAM */ - { .type = S3C_IRQTYPE_EDGE, }, /* nBATT_FLT */ - { .type = S3C_IRQTYPE_EDGE, }, /* TICK */ - { .type = S3C_IRQTYPE_EDGE, }, /* WDT */ - { .type = S3C_IRQTYPE_EDGE, }, /* TIMER0 */ - { .type = S3C_IRQTYPE_EDGE, }, /* TIMER1 */ - { .type = S3C_IRQTYPE_EDGE, }, /* TIMER2 */ - { .type = S3C_IRQTYPE_EDGE, }, /* TIMER3 */ - { .type = S3C_IRQTYPE_EDGE, }, /* TIMER4 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* UART2 */ - { .type = S3C_IRQTYPE_EDGE, }, /* LCD */ - { .type = S3C_IRQTYPE_EDGE, }, /* DMA0 */ - { .type = S3C_IRQTYPE_EDGE, }, /* DMA1 */ - { .type = S3C_IRQTYPE_EDGE, }, /* DMA2 */ - { .type = S3C_IRQTYPE_EDGE, }, /* DMA3 */ - { .type = S3C_IRQTYPE_EDGE, }, /* SDI */ - { .type = S3C_IRQTYPE_EDGE, }, /* SPI0 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* UART1 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* NFCON */ - { .type = S3C_IRQTYPE_EDGE, }, /* USBD */ - { .type = S3C_IRQTYPE_EDGE, }, /* USBH */ - { .type = S3C_IRQTYPE_EDGE, }, /* IIC */ - { .type = S3C_IRQTYPE_LEVEL, }, /* UART0 */ - { .type = S3C_IRQTYPE_EDGE, }, /* SPI1 */ - { .type = S3C_IRQTYPE_EDGE, }, /* RTC */ - { .type = S3C_IRQTYPE_LEVEL, }, /* ADCPARENT */ -}; - -static struct s3c_irq_data init_s3c2442subint[32] = { - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-RX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-TX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-ERR */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-RX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-TX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-ERR */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-RX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-TX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */ - { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* TC */ - { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* CAM_C */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* CAM_P */ -}; - -void __init s3c2442_init_irq(void) -{ - pr_info("S3C2442: IRQ Support\n"); - -#ifdef CONFIG_FIQ - init_FIQ(FIQ_START); -#endif - - s3c_intc[0] = s3c24xx_init_intc(NULL, &init_s3c2442base[0], NULL, - 0x4a000000); - if (IS_ERR(s3c_intc[0])) { - pr_err("irq: could not create main interrupt controller\n"); - return; - } - - s3c24xx_init_intc(NULL, &init_eint[0], s3c_intc[0], 0x560000a4); - s3c_intc[1] = s3c24xx_init_intc(NULL, &init_s3c2442subint[0], - s3c_intc[0], 0x4a000018); -} -#endif - -#ifdef CONFIG_CPU_S3C2443 -static struct s3c_irq_data init_s3c2443base[32] = { - { .type = S3C_IRQTYPE_EINT, }, /* EINT0 */ - { .type = S3C_IRQTYPE_EINT, }, /* EINT1 */ - { .type = S3C_IRQTYPE_EINT, }, /* EINT2 */ - { .type = S3C_IRQTYPE_EINT, }, /* EINT3 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* EINT4to7 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* EINT8to23 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* CAM */ - { .type = S3C_IRQTYPE_EDGE, }, /* nBATT_FLT */ - { .type = S3C_IRQTYPE_EDGE, }, /* TICK */ - { .type = S3C_IRQTYPE_LEVEL, }, /* WDT/AC97 */ - { .type = S3C_IRQTYPE_EDGE, }, /* TIMER0 */ - { .type = S3C_IRQTYPE_EDGE, }, /* TIMER1 */ - { .type = S3C_IRQTYPE_EDGE, }, /* TIMER2 */ - { .type = S3C_IRQTYPE_EDGE, }, /* TIMER3 */ - { .type = S3C_IRQTYPE_EDGE, }, /* TIMER4 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* UART2 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* LCD */ - { .type = S3C_IRQTYPE_LEVEL, }, /* DMA */ - { .type = S3C_IRQTYPE_LEVEL, }, /* UART3 */ - { .type = S3C_IRQTYPE_EDGE, }, /* CFON */ - { .type = S3C_IRQTYPE_EDGE, }, /* SDI1 */ - { .type = S3C_IRQTYPE_EDGE, }, /* SDI0 */ - { .type = S3C_IRQTYPE_EDGE, }, /* SPI0 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* UART1 */ - { .type = S3C_IRQTYPE_EDGE, }, /* NAND */ - { .type = S3C_IRQTYPE_EDGE, }, /* USBD */ - { .type = S3C_IRQTYPE_EDGE, }, /* USBH */ - { .type = S3C_IRQTYPE_EDGE, }, /* IIC */ - { .type = S3C_IRQTYPE_LEVEL, }, /* UART0 */ - { .type = S3C_IRQTYPE_EDGE, }, /* SPI1 */ - { .type = S3C_IRQTYPE_EDGE, }, /* RTC */ - { .type = S3C_IRQTYPE_LEVEL, }, /* ADCPARENT */ -}; - - -static struct s3c_irq_data init_s3c2443subint[32] = { - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-RX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-TX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-ERR */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-RX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-TX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-ERR */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-RX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-TX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */ - { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* TC */ - { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* CAM_C */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* CAM_P */ - { .type = S3C_IRQTYPE_NONE }, /* reserved */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD1 */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD2 */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD3 */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD4 */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA0 */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA1 */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA2 */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA3 */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA4 */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA5 */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-RX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-TX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-ERR */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* WDT */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* AC97 */ -}; - -void __init s3c2443_init_irq(void) -{ - pr_info("S3C2443: IRQ Support\n"); - -#ifdef CONFIG_FIQ - init_FIQ(FIQ_START); -#endif - - s3c_intc[0] = s3c24xx_init_intc(NULL, &init_s3c2443base[0], NULL, - 0x4a000000); - if (IS_ERR(s3c_intc[0])) { - pr_err("irq: could not create main interrupt controller\n"); - return; - } - - s3c24xx_init_intc(NULL, &init_eint[0], s3c_intc[0], 0x560000a4); - s3c_intc[1] = s3c24xx_init_intc(NULL, &init_s3c2443subint[0], - s3c_intc[0], 0x4a000018); -} -#endif - -#ifdef CONFIG_OF -static int s3c24xx_irq_map_of(struct irq_domain *h, unsigned int virq, - irq_hw_number_t hw) -{ - unsigned int ctrl_num = hw / 32; - unsigned int intc_hw = hw % 32; - struct s3c_irq_intc *intc = s3c_intc[ctrl_num]; - struct s3c_irq_intc *parent_intc = intc->parent; - struct s3c_irq_data *irq_data = &intc->irqs[intc_hw]; - - /* attach controller pointer to irq_data */ - irq_data->intc = intc; - irq_data->offset = intc_hw; - - if (!parent_intc) - irq_set_chip_and_handler(virq, &s3c_irq_chip, handle_edge_irq); - else - irq_set_chip_and_handler(virq, &s3c_irq_level_chip, - handle_edge_irq); - - irq_set_chip_data(virq, irq_data); - - return 0; -} - -/* Translate our of irq notation - * format: <ctrl_num ctrl_irq parent_irq type> - */ -static int s3c24xx_irq_xlate_of(struct irq_domain *d, struct device_node *n, - const u32 *intspec, unsigned int intsize, - irq_hw_number_t *out_hwirq, unsigned int *out_type) -{ - struct s3c_irq_intc *intc; - struct s3c_irq_intc *parent_intc; - struct s3c_irq_data *irq_data; - struct s3c_irq_data *parent_irq_data; - int irqno; - - if (WARN_ON(intsize < 4)) - return -EINVAL; - - if (intspec[0] > 2 || !s3c_intc[intspec[0]]) { - pr_err("controller number %d invalid\n", intspec[0]); - return -EINVAL; - } - intc = s3c_intc[intspec[0]]; - - *out_hwirq = intspec[0] * 32 + intspec[2]; - *out_type = intspec[3] & IRQ_TYPE_SENSE_MASK; - - parent_intc = intc->parent; - if (parent_intc) { - irq_data = &intc->irqs[intspec[2]]; - irq_data->parent_irq = intspec[1]; - parent_irq_data = &parent_intc->irqs[irq_data->parent_irq]; - parent_irq_data->sub_intc = intc; - parent_irq_data->sub_bits |= (1UL << intspec[2]); - - /* parent_intc is always s3c_intc[0], so no offset */ - irqno = irq_create_mapping(parent_intc->domain, intspec[1]); - if (irqno < 0) { - pr_err("irq: could not map parent interrupt\n"); - return irqno; - } - - irq_set_chained_handler(irqno, s3c_irq_demux); - } - - return 0; -} - -static const struct irq_domain_ops s3c24xx_irq_ops_of = { - .map = s3c24xx_irq_map_of, - .xlate = s3c24xx_irq_xlate_of, -}; - -struct s3c24xx_irq_of_ctrl { - char *name; - unsigned long offset; - struct s3c_irq_intc **handle; - struct s3c_irq_intc **parent; - struct irq_domain_ops *ops; -}; - -static int __init s3c_init_intc_of(struct device_node *np, - struct device_node *interrupt_parent, - struct s3c24xx_irq_of_ctrl *s3c_ctrl, int num_ctrl) -{ - struct s3c_irq_intc *intc; - struct s3c24xx_irq_of_ctrl *ctrl; - struct irq_domain *domain; - void __iomem *reg_base; - int i; - - reg_base = of_iomap(np, 0); - if (!reg_base) { - pr_err("irq-s3c24xx: could not map irq registers\n"); - return -EINVAL; - } - - domain = irq_domain_add_linear(np, num_ctrl * 32, - &s3c24xx_irq_ops_of, NULL); - if (!domain) { - pr_err("irq: could not create irq-domain\n"); - return -EINVAL; - } - - for (i = 0; i < num_ctrl; i++) { - ctrl = &s3c_ctrl[i]; - - pr_debug("irq: found controller %s\n", ctrl->name); - - intc = kzalloc(sizeof(struct s3c_irq_intc), GFP_KERNEL); - if (!intc) - return -ENOMEM; - - intc->domain = domain; - intc->irqs = kcalloc(32, sizeof(struct s3c_irq_data), - GFP_KERNEL); - if (!intc->irqs) { - kfree(intc); - return -ENOMEM; - } - - if (ctrl->parent) { - intc->reg_pending = reg_base + ctrl->offset; - intc->reg_mask = reg_base + ctrl->offset + 0x4; - - if (*(ctrl->parent)) { - intc->parent = *(ctrl->parent); - } else { - pr_warn("irq: parent of %s missing\n", - ctrl->name); - kfree(intc->irqs); - kfree(intc); - continue; - } - } else { - intc->reg_pending = reg_base + ctrl->offset; - intc->reg_mask = reg_base + ctrl->offset + 0x08; - intc->reg_intpnd = reg_base + ctrl->offset + 0x10; - } - - s3c24xx_clear_intc(intc); - s3c_intc[i] = intc; - } - - set_handle_irq(s3c24xx_handle_irq); - - return 0; -} - -static struct s3c24xx_irq_of_ctrl s3c2410_ctrl[] = { - { - .name = "intc", - .offset = 0, - }, { - .name = "subintc", - .offset = 0x18, - .parent = &s3c_intc[0], - } -}; - -int __init s3c2410_init_intc_of(struct device_node *np, - struct device_node *interrupt_parent) -{ - return s3c_init_intc_of(np, interrupt_parent, - s3c2410_ctrl, ARRAY_SIZE(s3c2410_ctrl)); -} -IRQCHIP_DECLARE(s3c2410_irq, "samsung,s3c2410-irq", s3c2410_init_intc_of); - -static struct s3c24xx_irq_of_ctrl s3c2416_ctrl[] = { - { - .name = "intc", - .offset = 0, - }, { - .name = "subintc", - .offset = 0x18, - .parent = &s3c_intc[0], - }, { - .name = "intc2", - .offset = 0x40, - } -}; - -int __init s3c2416_init_intc_of(struct device_node *np, - struct device_node *interrupt_parent) -{ - return s3c_init_intc_of(np, interrupt_parent, - s3c2416_ctrl, ARRAY_SIZE(s3c2416_ctrl)); -} -IRQCHIP_DECLARE(s3c2416_irq, "samsung,s3c2416-irq", s3c2416_init_intc_of); -#endif diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig index f0cb7aeabbc4..31481c9fcc2e 100644 --- a/drivers/mmc/host/Kconfig +++ b/drivers/mmc/host/Kconfig @@ -302,7 +302,7 @@ config MMC_SDHCI_TEGRA config MMC_SDHCI_S3C tristate "SDHCI support on Samsung S3C SoC" depends on MMC_SDHCI - depends on PLAT_SAMSUNG || COMPILE_TEST + depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST help This selects the Secure Digital Host Controller Interface (SDHCI) often referrered to as the HSMMC block in some of the Samsung S3C diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c index e3698aba8dd3..643d54eceef6 100644 --- a/drivers/mmc/host/s3cmci.c +++ b/drivers/mmc/host/s3cmci.c @@ -24,11 +24,6 @@ #include <linux/of.h> #include <linux/of_device.h> #include <linux/mmc/slot-gpio.h> - -#include <plat/gpio-cfg.h> -#include <mach/dma.h> -#include <mach/gpio-samsung.h> - #include <linux/platform_data/mmc-s3cmci.h> #include "s3cmci.h" @@ -305,7 +300,8 @@ static inline void clear_imask(struct s3cmci_host *host) static void s3cmci_check_sdio_irq(struct s3cmci_host *host) { if (host->sdio_irqen) { - if (gpio_get_value(S3C2410_GPE(8)) == 0) { + if (host->pdata->bus[3] && + gpiod_get_value(host->pdata->bus[3]) == 0) { pr_debug("%s: signalling irq\n", __func__); mmc_signal_sdio_irq(host->mmc); } @@ -1201,33 +1197,20 @@ static void s3cmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) switch (ios->power_mode) { case MMC_POWER_ON: case MMC_POWER_UP: - /* Configure GPE5...GPE10 pins in SD mode */ - if (!host->pdev->dev.of_node) - s3c_gpio_cfgall_range(S3C2410_GPE(5), 6, S3C_GPIO_SFN(2), - S3C_GPIO_PULL_NONE); - - if (host->pdata->set_power) - host->pdata->set_power(ios->power_mode, ios->vdd); - if (!host->is2440) mci_con |= S3C2410_SDICON_FIFORESET; - break; case MMC_POWER_OFF: default: - if (!host->pdev->dev.of_node) - gpio_direction_output(S3C2410_GPE(5), 0); - if (host->is2440) mci_con |= S3C2440_SDICON_SDRESET; - - if (host->pdata->set_power) - host->pdata->set_power(ios->power_mode, ios->vdd); - break; } + if (host->pdata->set_power) + host->pdata->set_power(ios->power_mode, ios->vdd); + s3cmci_set_clk(host, ios); /* Set CLOCK_ENABLE */ @@ -1305,13 +1288,6 @@ static const struct mmc_host_ops s3cmci_ops = { .enable_sdio_irq = s3cmci_enable_sdio_irq, }; -static struct s3c24xx_mci_pdata s3cmci_def_pdata = { - /* This is currently here to avoid a number of if (host->pdata) - * checks. Any zero fields to ensure reasonable defaults are picked. */ - .no_wprotect = 1, - .no_detect = 1, -}; - #ifdef CONFIG_ARM_S3C24XX_CPUFREQ static int s3cmci_cpufreq_transition(struct notifier_block *nb, @@ -1465,24 +1441,21 @@ static int s3cmci_probe_pdata(struct s3cmci_host *host) int i, ret; host->is2440 = platform_get_device_id(pdev)->driver_data; + pdata = pdev->dev.platform_data; + if (!pdata) { + dev_err(&pdev->dev, "need platform data"); + return -ENXIO; + } - for (i = S3C2410_GPE(5); i <= S3C2410_GPE(10); i++) { - ret = gpio_request(i, dev_name(&pdev->dev)); - if (ret) { + for (i = 0; i < 6; i++) { + pdata->bus[i] = devm_gpiod_get_index(&pdev->dev, "bus", i, + GPIOD_OUT_LOW); + if (IS_ERR(pdata->bus[i])) { dev_err(&pdev->dev, "failed to get gpio %d\n", i); - - for (i--; i >= S3C2410_GPE(5); i--) - gpio_free(i); - - return ret; + return PTR_ERR(pdata->bus[i]); } } - if (!pdev->dev.platform_data) - pdev->dev.platform_data = &s3cmci_def_pdata; - - pdata = pdev->dev.platform_data; - if (pdata->no_wprotect) mmc->caps2 |= MMC_CAP2_NO_WRITE_PROTECT; @@ -1537,7 +1510,6 @@ static int s3cmci_probe(struct platform_device *pdev) struct s3cmci_host *host; struct mmc_host *mmc; int ret; - int i; mmc = mmc_alloc_host(sizeof(struct s3cmci_host), &pdev->dev); if (!mmc) { @@ -1581,7 +1553,7 @@ static int s3cmci_probe(struct platform_device *pdev) "failed to get io memory region resource.\n"); ret = -ENOENT; - goto probe_free_gpio; + goto probe_free_host; } host->mem = request_mem_region(host->mem->start, @@ -1590,7 +1562,7 @@ static int s3cmci_probe(struct platform_device *pdev) if (!host->mem) { dev_err(&pdev->dev, "failed to request io memory region.\n"); ret = -ENOENT; - goto probe_free_gpio; + goto probe_free_host; } host->base = ioremap(host->mem->start, resource_size(host->mem)); @@ -1714,11 +1686,6 @@ static int s3cmci_probe(struct platform_device *pdev) probe_free_mem_region: release_mem_region(host->mem->start, resource_size(host->mem)); - probe_free_gpio: - if (!pdev->dev.of_node) - for (i = S3C2410_GPE(5); i <= S3C2410_GPE(10); i++) - gpio_free(i); - probe_free_host: mmc_free_host(mmc); @@ -1744,7 +1711,6 @@ static int s3cmci_remove(struct platform_device *pdev) { struct mmc_host *mmc = platform_get_drvdata(pdev); struct s3cmci_host *host = mmc_priv(mmc); - int i; s3cmci_shutdown(pdev); @@ -1757,10 +1723,6 @@ static int s3cmci_remove(struct platform_device *pdev) free_irq(host->irq, host); - if (!pdev->dev.of_node) - for (i = S3C2410_GPE(5); i <= S3C2410_GPE(10); i++) - gpio_free(i); - iounmap(host->base); release_mem_region(host->mem->start, resource_size(host->mem)); diff --git a/drivers/power/supply/s3c_adc_battery.c b/drivers/power/supply/s3c_adc_battery.c index 3d00b35cafc9..60b7f41ab063 100644 --- a/drivers/power/supply/s3c_adc_battery.c +++ b/drivers/power/supply/s3c_adc_battery.c @@ -22,7 +22,7 @@ #include <linux/init.h> #include <linux/module.h> -#include <plat/adc.h> +#include <linux/soc/samsung/s3c-adc.h> #define BAT_POLL_INTERVAL 10000 /* ms */ #define JITTER_DELAY 500 /* ms */ diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig index 78ddc127e45e..63be5362fd3a 100644 --- a/drivers/pwm/Kconfig +++ b/drivers/pwm/Kconfig @@ -410,7 +410,7 @@ config PWM_ROCKCHIP config PWM_SAMSUNG tristate "Samsung PWM support" - depends on PLAT_SAMSUNG || ARCH_EXYNOS || COMPILE_TEST + depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST help Generic PWM framework driver for Samsung. diff --git a/drivers/soc/samsung/Kconfig b/drivers/soc/samsung/Kconfig index 264185664594..fc7f48a92288 100644 --- a/drivers/soc/samsung/Kconfig +++ b/drivers/soc/samsung/Kconfig @@ -35,7 +35,54 @@ config EXYNOS_PMU_ARM_DRIVERS config EXYNOS_PM_DOMAINS bool "Exynos PM domains" if COMPILE_TEST - depends on PM_GENERIC_DOMAINS || COMPILE_TEST + depends on (ARCH_EXYNOS && PM_GENERIC_DOMAINS) || COMPILE_TEST + +config SAMSUNG_PM_DEBUG + bool "Samsung PM Suspend debug" + depends on PM && DEBUG_KERNEL + depends on PLAT_S3C24XX || ARCH_S3C64XX || ARCH_S5PV210 + depends on DEBUG_S3C24XX_UART || DEBUG_S3C2410_UART + depends on DEBUG_LL && MMU + help + Say Y here if you want verbose debugging from the PM Suspend and + Resume code. See <file:Documentation/arm/samsung-s3c24xx/suspend.rst> + for more information. + +config S3C_PM_DEBUG_LED_SMDK + bool "SMDK LED suspend/resume debugging" + depends on PM && (MACH_SMDK6410) + help + Say Y here to enable the use of the SMDK LEDs on the baseboard + for debugging of the state of the suspend and resume process. + + Note, this currently only works for S3C64XX based SMDK boards. + +config SAMSUNG_PM_CHECK + bool "S3C2410 PM Suspend Memory CRC" + depends on PM && (PLAT_S3C24XX || ARCH_S3C64XX || ARCH_S5PV210) + select CRC32 + help + Enable the PM code's memory area checksum over sleep. This option + will generate CRCs of all blocks of memory, and store them before + going to sleep. The blocks are then checked on resume for any + errors. + + Note, this can take several seconds depending on memory size + and CPU speed. + + See <file:Documentation/arm/samsung-s3c24xx/suspend.rst> + +config SAMSUNG_PM_CHECK_CHUNKSIZE + int "S3C2410 PM Suspend CRC Chunksize (KiB)" + depends on PM && SAMSUNG_PM_CHECK + default 64 + help + Set the chunksize in Kilobytes of the CRC for checking memory + corruption over suspend and resume. A smaller value will mean that + the CRC data block will take more memory, but will identify any + faults with better precision. + + See <file:Documentation/arm/samsung-s3c24xx/suspend.rst> config EXYNOS_REGULATOR_COUPLER bool "Exynos SoC Regulator Coupler" if COMPILE_TEST diff --git a/drivers/soc/samsung/Makefile b/drivers/soc/samsung/Makefile index ecc3a32f6406..59e8e9453f27 100644 --- a/drivers/soc/samsung/Makefile +++ b/drivers/soc/samsung/Makefile @@ -10,3 +10,6 @@ obj-$(CONFIG_EXYNOS_PMU_ARM_DRIVERS) += exynos3250-pmu.o exynos4-pmu.o \ exynos5250-pmu.o exynos5420-pmu.o obj-$(CONFIG_EXYNOS_PM_DOMAINS) += pm_domains.o obj-$(CONFIG_EXYNOS_REGULATOR_COUPLER) += exynos-regulator-coupler.o + +obj-$(CONFIG_SAMSUNG_PM_CHECK) += s3c-pm-check.o +obj-$(CONFIG_SAMSUNG_PM_DEBUG) += s3c-pm-debug.o diff --git a/drivers/soc/samsung/s3c-pm-check.c b/drivers/soc/samsung/s3c-pm-check.c new file mode 100644 index 000000000000..ff3e099fc208 --- /dev/null +++ b/drivers/soc/samsung/s3c-pm-check.c @@ -0,0 +1,233 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// originally in linux/arch/arm/plat-s3c24xx/pm.c +// +// Copyright (c) 2004-2008 Simtec Electronics +// http://armlinux.simtec.co.uk +// Ben Dooks <ben@simtec.co.uk> +// +// S3C Power Mangament - suspend/resume memory corruption check. + +#include <linux/kernel.h> +#include <linux/suspend.h> +#include <linux/init.h> +#include <linux/crc32.h> +#include <linux/ioport.h> +#include <linux/slab.h> + +#include <linux/soc/samsung/s3c-pm.h> + +#if CONFIG_SAMSUNG_PM_CHECK_CHUNKSIZE < 1 +#error CONFIG_SAMSUNG_PM_CHECK_CHUNKSIZE must be a positive non-zero value +#endif + +/* suspend checking code... + * + * this next area does a set of crc checks over all the installed + * memory, so the system can verify if the resume was ok. + * + * CONFIG_SAMSUNG_PM_CHECK_CHUNKSIZE defines the block-size for the CRC, + * increasing it will mean that the area corrupted will be less easy to spot, + * and reducing the size will cause the CRC save area to grow +*/ + +#define CHECK_CHUNKSIZE (CONFIG_SAMSUNG_PM_CHECK_CHUNKSIZE * 1024) + +static u32 crc_size; /* size needed for the crc block */ +static u32 *crcs; /* allocated over suspend/resume */ + +typedef u32 *(run_fn_t)(struct resource *ptr, u32 *arg); + +/* s3c_pm_run_res + * + * go through the given resource list, and look for system ram +*/ + +static void s3c_pm_run_res(struct resource *ptr, run_fn_t fn, u32 *arg) +{ + while (ptr != NULL) { + if (ptr->child != NULL) + s3c_pm_run_res(ptr->child, fn, arg); + + if ((ptr->flags & IORESOURCE_SYSTEM_RAM) + == IORESOURCE_SYSTEM_RAM) { + S3C_PMDBG("Found system RAM at %08lx..%08lx\n", + (unsigned long)ptr->start, + (unsigned long)ptr->end); + arg = (fn)(ptr, arg); + } + + ptr = ptr->sibling; + } +} + +static void s3c_pm_run_sysram(run_fn_t fn, u32 *arg) +{ + s3c_pm_run_res(&iomem_resource, fn, arg); +} + +static u32 *s3c_pm_countram(struct resource *res, u32 *val) +{ + u32 size = (u32)resource_size(res); + + size += CHECK_CHUNKSIZE-1; + size /= CHECK_CHUNKSIZE; + + S3C_PMDBG("Area %08lx..%08lx, %d blocks\n", + (unsigned long)res->start, (unsigned long)res->end, size); + + *val += size * sizeof(u32); + return val; +} + +/* s3c_pm_prepare_check + * + * prepare the necessary information for creating the CRCs. This + * must be done before the final save, as it will require memory + * allocating, and thus touching bits of the kernel we do not + * know about. +*/ + +void s3c_pm_check_prepare(void) +{ + crc_size = 0; + + s3c_pm_run_sysram(s3c_pm_countram, &crc_size); + + S3C_PMDBG("s3c_pm_prepare_check: %u checks needed\n", crc_size); + + crcs = kmalloc(crc_size+4, GFP_KERNEL); + if (crcs == NULL) + printk(KERN_ERR "Cannot allocated CRC save area\n"); +} + +static u32 *s3c_pm_makecheck(struct resource *res, u32 *val) +{ + unsigned long addr, left; + + for (addr = res->start; addr < res->end; + addr += CHECK_CHUNKSIZE) { + left = res->end - addr; + + if (left > CHECK_CHUNKSIZE) + left = CHECK_CHUNKSIZE; + + *val = crc32_le(~0, phys_to_virt(addr), left); + val++; + } + + return val; +} + +/* s3c_pm_check_store + * + * compute the CRC values for the memory blocks before the final + * sleep. +*/ + +void s3c_pm_check_store(void) +{ + if (crcs != NULL) + s3c_pm_run_sysram(s3c_pm_makecheck, crcs); +} + +/* in_region + * + * return TRUE if the area defined by ptr..ptr+size contains the + * what..what+whatsz +*/ + +static inline int in_region(void *ptr, int size, void *what, size_t whatsz) +{ + if ((what+whatsz) < ptr) + return 0; + + if (what > (ptr+size)) + return 0; + + return 1; +} + +/** + * s3c_pm_runcheck() - helper to check a resource on restore. + * @res: The resource to check + * @vak: Pointer to list of CRC32 values to check. + * + * Called from the s3c_pm_check_restore() via s3c_pm_run_sysram(), this + * function runs the given memory resource checking it against the stored + * CRC to ensure that memory is restored. The function tries to skip as + * many of the areas used during the suspend process. + */ +static u32 *s3c_pm_runcheck(struct resource *res, u32 *val) +{ + unsigned long addr; + unsigned long left; + void *stkpage; + void *ptr; + u32 calc; + + stkpage = (void *)((u32)&calc & ~PAGE_MASK); + + for (addr = res->start; addr < res->end; + addr += CHECK_CHUNKSIZE) { + left = res->end - addr; + + if (left > CHECK_CHUNKSIZE) + left = CHECK_CHUNKSIZE; + + ptr = phys_to_virt(addr); + + if (in_region(ptr, left, stkpage, 4096)) { + S3C_PMDBG("skipping %08lx, has stack in\n", addr); + goto skip_check; + } + + if (in_region(ptr, left, crcs, crc_size)) { + S3C_PMDBG("skipping %08lx, has crc block in\n", addr); + goto skip_check; + } + + /* calculate and check the checksum */ + + calc = crc32_le(~0, ptr, left); + if (calc != *val) { + printk(KERN_ERR "Restore CRC error at " + "%08lx (%08x vs %08x)\n", addr, calc, *val); + + S3C_PMDBG("Restore CRC error at %08lx (%08x vs %08x)\n", + addr, calc, *val); + } + + skip_check: + val++; + } + + return val; +} + +/** + * s3c_pm_check_restore() - memory check called on resume + * + * check the CRCs after the restore event and free the memory used + * to hold them +*/ +void s3c_pm_check_restore(void) +{ + if (crcs != NULL) + s3c_pm_run_sysram(s3c_pm_runcheck, crcs); +} + +/** + * s3c_pm_check_cleanup() - free memory resources + * + * Free the resources that where allocated by the suspend + * memory check code. We do this separately from the + * s3c_pm_check_restore() function as we cannot call any + * functions that might sleep during that resume. + */ +void s3c_pm_check_cleanup(void) +{ + kfree(crcs); + crcs = NULL; +} + diff --git a/drivers/soc/samsung/s3c-pm-debug.c b/drivers/soc/samsung/s3c-pm-debug.c new file mode 100644 index 000000000000..b5ce0e9a41e5 --- /dev/null +++ b/drivers/soc/samsung/s3c-pm-debug.c @@ -0,0 +1,79 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (C) 2013 Samsung Electronics Co., Ltd. +// Tomasz Figa <t.figa@samsung.com> +// Copyright (C) 2008 Openmoko, Inc. +// Copyright (C) 2004-2008 Simtec Electronics +// Ben Dooks <ben@simtec.co.uk> +// http://armlinux.simtec.co.uk/ +// +// Samsung common power management (suspend to RAM) debug support + +#include <linux/serial_core.h> +#include <linux/serial_s3c.h> +#include <linux/io.h> + +#include <asm/mach/map.h> + +#include <linux/soc/samsung/s3c-pm.h> + +static struct pm_uart_save uart_save; + +extern void printascii(const char *); + +void s3c_pm_dbg(const char *fmt, ...) +{ + va_list va; + char buff[256]; + + va_start(va, fmt); + vsnprintf(buff, sizeof(buff), fmt, va); + va_end(va); + + printascii(buff); +} + +static inline void __iomem *s3c_pm_uart_base(void) +{ + unsigned long paddr; + unsigned long vaddr; + + debug_ll_addr(&paddr, &vaddr); + + return (void __iomem *)vaddr; +} + +void s3c_pm_save_uarts(bool is_s3c2410) +{ + void __iomem *regs = s3c_pm_uart_base(); + struct pm_uart_save *save = &uart_save; + + save->ulcon = __raw_readl(regs + S3C2410_ULCON); + save->ucon = __raw_readl(regs + S3C2410_UCON); + save->ufcon = __raw_readl(regs + S3C2410_UFCON); + save->umcon = __raw_readl(regs + S3C2410_UMCON); + save->ubrdiv = __raw_readl(regs + S3C2410_UBRDIV); + + if (!is_s3c2410) + save->udivslot = __raw_readl(regs + S3C2443_DIVSLOT); + + S3C_PMDBG("UART[%p]: ULCON=%04x, UCON=%04x, UFCON=%04x, UBRDIV=%04x\n", + regs, save->ulcon, save->ucon, save->ufcon, save->ubrdiv); +} + +void s3c_pm_restore_uarts(bool is_s3c2410) +{ + void __iomem *regs = s3c_pm_uart_base(); + struct pm_uart_save *save = &uart_save; + + s3c_pm_arch_update_uart(regs, save); + + __raw_writel(save->ulcon, regs + S3C2410_ULCON); + __raw_writel(save->ucon, regs + S3C2410_UCON); + __raw_writel(save->ufcon, regs + S3C2410_UFCON); + __raw_writel(save->umcon, regs + S3C2410_UMCON); + __raw_writel(save->ubrdiv, regs + S3C2410_UBRDIV); + + if (!is_s3c2410) + __raw_writel(save->udivslot, regs + S3C2443_DIVSLOT); +} diff --git a/drivers/soc/ti/omap_prm.c b/drivers/soc/ti/omap_prm.c index c9b3f9ebf0bb..980b04c38fd9 100644 --- a/drivers/soc/ti/omap_prm.c +++ b/drivers/soc/ti/omap_prm.c @@ -10,14 +10,39 @@ #include <linux/device.h> #include <linux/io.h> #include <linux/iopoll.h> +#include <linux/module.h> #include <linux/of.h> #include <linux/of_device.h> #include <linux/platform_device.h> +#include <linux/pm_domain.h> #include <linux/reset-controller.h> #include <linux/delay.h> #include <linux/platform_data/ti-prm.h> +enum omap_prm_domain_mode { + OMAP_PRMD_OFF, + OMAP_PRMD_RETENTION, + OMAP_PRMD_ON_INACTIVE, + OMAP_PRMD_ON_ACTIVE, +}; + +struct omap_prm_domain_map { + unsigned int usable_modes; /* Mask of hardware supported modes */ + unsigned long statechange:1; /* Optional low-power state change */ + unsigned long logicretstate:1; /* Optional logic off mode */ +}; + +struct omap_prm_domain { + struct device *dev; + struct omap_prm *prm; + struct generic_pm_domain pd; + u16 pwrstctrl; + u16 pwrstst; + const struct omap_prm_domain_map *cap; + u32 pwrstctrl_saved; +}; + struct omap_rst_map { s8 rst; s8 st; @@ -27,6 +52,9 @@ struct omap_prm_data { u32 base; const char *name; const char *clkdm_name; + u16 pwrstctrl; + u16 pwrstst; + const struct omap_prm_domain_map *dmap; u16 rstctrl; u16 rstst; const struct omap_rst_map *rstmap; @@ -36,6 +64,7 @@ struct omap_prm_data { struct omap_prm { const struct omap_prm_data *data; void __iomem *base; + struct omap_prm_domain *prmd; }; struct omap_reset_data { @@ -47,6 +76,7 @@ struct omap_reset_data { struct device *dev; }; +#define genpd_to_prm_domain(gpd) container_of(gpd, struct omap_prm_domain, pd) #define to_omap_reset_data(p) container_of((p), struct omap_reset_data, rcdev) #define OMAP_MAX_RESETS 8 @@ -58,6 +88,39 @@ struct omap_reset_data { #define OMAP_PRM_HAS_RESETS (OMAP_PRM_HAS_RSTCTRL | OMAP_PRM_HAS_RSTST) +#define PRM_STATE_MAX_WAIT 10000 +#define PRM_LOGICRETSTATE BIT(2) +#define PRM_LOWPOWERSTATECHANGE BIT(4) +#define PRM_POWERSTATE_MASK OMAP_PRMD_ON_ACTIVE + +#define PRM_ST_INTRANSITION BIT(20) + +static const struct omap_prm_domain_map omap_prm_all = { + .usable_modes = BIT(OMAP_PRMD_ON_ACTIVE) | BIT(OMAP_PRMD_ON_INACTIVE) | + BIT(OMAP_PRMD_RETENTION) | BIT(OMAP_PRMD_OFF), + .statechange = 1, + .logicretstate = 1, +}; + +static const struct omap_prm_domain_map omap_prm_noinact = { + .usable_modes = BIT(OMAP_PRMD_ON_ACTIVE) | BIT(OMAP_PRMD_RETENTION) | + BIT(OMAP_PRMD_OFF), + .statechange = 1, + .logicretstate = 1, +}; + +static const struct omap_prm_domain_map omap_prm_nooff = { + .usable_modes = BIT(OMAP_PRMD_ON_ACTIVE) | BIT(OMAP_PRMD_ON_INACTIVE) | + BIT(OMAP_PRMD_RETENTION), + .statechange = 1, + .logicretstate = 1, +}; + +static const struct omap_prm_domain_map omap_prm_onoff_noauto = { + .usable_modes = BIT(OMAP_PRMD_ON_ACTIVE) | BIT(OMAP_PRMD_OFF), + .statechange = 1, +}; + static const struct omap_rst_map rst_map_0[] = { { .rst = 0, .st = 0 }, { .rst = -1 }, @@ -78,6 +141,10 @@ static const struct omap_rst_map rst_map_012[] = { static const struct omap_prm_data omap4_prm_data[] = { { .name = "tesla", .base = 0x4a306400, .rstctrl = 0x10, .rstst = 0x14, .rstmap = rst_map_01 }, + { + .name = "abe", .base = 0x4a306500, + .pwrstctrl = 0, .pwrstst = 0x4, .dmap = &omap_prm_all, + }, { .name = "core", .base = 0x4a306700, .rstctrl = 0x210, .rstst = 0x214, .clkdm_name = "ducati", .rstmap = rst_map_012 }, { .name = "ivahd", .base = 0x4a306f00, .rstctrl = 0x10, .rstst = 0x14, .rstmap = rst_map_012 }, { .name = "device", .base = 0x4a307b00, .rstctrl = 0x0, .rstst = 0x4, .rstmap = rst_map_01, .flags = OMAP_PRM_HAS_RSTCTRL | OMAP_PRM_HAS_NO_CLKDM }, @@ -86,6 +153,10 @@ static const struct omap_prm_data omap4_prm_data[] = { static const struct omap_prm_data omap5_prm_data[] = { { .name = "dsp", .base = 0x4ae06400, .rstctrl = 0x10, .rstst = 0x14, .rstmap = rst_map_01 }, + { + .name = "abe", .base = 0x4ae06500, + .pwrstctrl = 0, .pwrstst = 0x4, .dmap = &omap_prm_nooff, + }, { .name = "core", .base = 0x4ae06700, .rstctrl = 0x210, .rstst = 0x214, .clkdm_name = "ipu", .rstmap = rst_map_012 }, { .name = "iva", .base = 0x4ae07200, .rstctrl = 0x10, .rstst = 0x14, .rstmap = rst_map_012 }, { .name = "device", .base = 0x4ae07c00, .rstctrl = 0x0, .rstst = 0x4, .rstmap = rst_map_01, .flags = OMAP_PRM_HAS_RSTCTRL | OMAP_PRM_HAS_NO_CLKDM }, @@ -119,7 +190,11 @@ static const struct omap_prm_data am3_prm_data[] = { { .name = "per", .base = 0x44e00c00, .rstctrl = 0x0, .rstmap = am3_per_rst_map, .flags = OMAP_PRM_HAS_RSTCTRL, .clkdm_name = "pruss_ocp" }, { .name = "wkup", .base = 0x44e00d00, .rstctrl = 0x0, .rstst = 0xc, .rstmap = am3_wkup_rst_map, .flags = OMAP_PRM_HAS_RSTCTRL | OMAP_PRM_HAS_NO_CLKDM }, { .name = "device", .base = 0x44e00f00, .rstctrl = 0x0, .rstst = 0x8, .rstmap = rst_map_01, .flags = OMAP_PRM_HAS_RSTCTRL | OMAP_PRM_HAS_NO_CLKDM }, - { .name = "gfx", .base = 0x44e01100, .rstctrl = 0x4, .rstst = 0x14, .rstmap = rst_map_0, .clkdm_name = "gfx_l3" }, + { + .name = "gfx", .base = 0x44e01100, + .pwrstctrl = 0, .pwrstst = 0x10, .dmap = &omap_prm_noinact, + .rstctrl = 0x4, .rstst = 0x14, .rstmap = rst_map_0, .clkdm_name = "gfx_l3", + }, { }, }; @@ -135,7 +210,11 @@ static const struct omap_rst_map am4_device_rst_map[] = { }; static const struct omap_prm_data am4_prm_data[] = { - { .name = "gfx", .base = 0x44df0400, .rstctrl = 0x10, .rstst = 0x14, .rstmap = rst_map_0, .clkdm_name = "gfx_l3" }, + { + .name = "gfx", .base = 0x44df0400, + .pwrstctrl = 0, .pwrstst = 0x4, .dmap = &omap_prm_onoff_noauto, + .rstctrl = 0x10, .rstst = 0x14, .rstmap = rst_map_0, .clkdm_name = "gfx_l3", + }, { .name = "per", .base = 0x44df0800, .rstctrl = 0x10, .rstst = 0x14, .rstmap = am4_per_rst_map, .clkdm_name = "pruss_ocp" }, { .name = "wkup", .base = 0x44df2000, .rstctrl = 0x10, .rstst = 0x14, .rstmap = am3_wkup_rst_map, .flags = OMAP_PRM_HAS_NO_CLKDM }, { .name = "device", .base = 0x44df4000, .rstctrl = 0x0, .rstst = 0x4, .rstmap = am4_device_rst_map, .flags = OMAP_PRM_HAS_RSTCTRL | OMAP_PRM_HAS_NO_CLKDM }, @@ -151,6 +230,180 @@ static const struct of_device_id omap_prm_id_table[] = { { }, }; +#ifdef DEBUG +static void omap_prm_domain_show_state(struct omap_prm_domain *prmd, + const char *desc) +{ + dev_dbg(prmd->dev, "%s %s: %08x/%08x\n", + prmd->pd.name, desc, + readl_relaxed(prmd->prm->base + prmd->pwrstctrl), + readl_relaxed(prmd->prm->base + prmd->pwrstst)); +} +#else +static inline void omap_prm_domain_show_state(struct omap_prm_domain *prmd, + const char *desc) +{ +} +#endif + +static int omap_prm_domain_power_on(struct generic_pm_domain *domain) +{ + struct omap_prm_domain *prmd; + int ret; + u32 v; + + prmd = genpd_to_prm_domain(domain); + if (!prmd->cap) + return 0; + + omap_prm_domain_show_state(prmd, "on: previous state"); + + if (prmd->pwrstctrl_saved) + v = prmd->pwrstctrl_saved; + else + v = readl_relaxed(prmd->prm->base + prmd->pwrstctrl); + + writel_relaxed(v | OMAP_PRMD_ON_ACTIVE, + prmd->prm->base + prmd->pwrstctrl); + + /* wait for the transition bit to get cleared */ + ret = readl_relaxed_poll_timeout(prmd->prm->base + prmd->pwrstst, + v, !(v & PRM_ST_INTRANSITION), 1, + PRM_STATE_MAX_WAIT); + if (ret) + dev_err(prmd->dev, "%s: %s timed out\n", + prmd->pd.name, __func__); + + omap_prm_domain_show_state(prmd, "on: new state"); + + return ret; +} + +/* No need to check for holes in the mask for the lowest mode */ +static int omap_prm_domain_find_lowest(struct omap_prm_domain *prmd) +{ + return __ffs(prmd->cap->usable_modes); +} + +static int omap_prm_domain_power_off(struct generic_pm_domain *domain) +{ + struct omap_prm_domain *prmd; + int ret; + u32 v; + + prmd = genpd_to_prm_domain(domain); + if (!prmd->cap) + return 0; + + omap_prm_domain_show_state(prmd, "off: previous state"); + + v = readl_relaxed(prmd->prm->base + prmd->pwrstctrl); + prmd->pwrstctrl_saved = v; + + v &= ~PRM_POWERSTATE_MASK; + v |= omap_prm_domain_find_lowest(prmd); + + if (prmd->cap->statechange) + v |= PRM_LOWPOWERSTATECHANGE; + if (prmd->cap->logicretstate) + v &= ~PRM_LOGICRETSTATE; + else + v |= PRM_LOGICRETSTATE; + + writel_relaxed(v, prmd->prm->base + prmd->pwrstctrl); + + /* wait for the transition bit to get cleared */ + ret = readl_relaxed_poll_timeout(prmd->prm->base + prmd->pwrstst, + v, !(v & PRM_ST_INTRANSITION), 1, + PRM_STATE_MAX_WAIT); + if (ret) + dev_warn(prmd->dev, "%s: %s timed out\n", + __func__, prmd->pd.name); + + omap_prm_domain_show_state(prmd, "off: new state"); + + return 0; +} + +static int omap_prm_domain_attach_dev(struct generic_pm_domain *domain, + struct device *dev) +{ + struct generic_pm_domain_data *genpd_data; + struct of_phandle_args pd_args; + struct omap_prm_domain *prmd; + struct device_node *np; + int ret; + + prmd = genpd_to_prm_domain(domain); + np = dev->of_node; + + ret = of_parse_phandle_with_args(np, "power-domains", + "#power-domain-cells", 0, &pd_args); + if (ret < 0) + return ret; + + if (pd_args.args_count != 0) + dev_warn(dev, "%s: unusupported #power-domain-cells: %i\n", + prmd->pd.name, pd_args.args_count); + + genpd_data = dev_gpd_data(dev); + genpd_data->data = NULL; + + return 0; +} + +static void omap_prm_domain_detach_dev(struct generic_pm_domain *domain, + struct device *dev) +{ + struct generic_pm_domain_data *genpd_data; + + genpd_data = dev_gpd_data(dev); + genpd_data->data = NULL; +} + +static int omap_prm_domain_init(struct device *dev, struct omap_prm *prm) +{ + struct omap_prm_domain *prmd; + struct device_node *np = dev->of_node; + const struct omap_prm_data *data; + const char *name; + int error; + + if (!of_find_property(dev->of_node, "#power-domain-cells", NULL)) + return 0; + + of_node_put(dev->of_node); + + prmd = devm_kzalloc(dev, sizeof(*prmd), GFP_KERNEL); + if (!prmd) + return -ENOMEM; + + data = prm->data; + name = devm_kasprintf(dev, GFP_KERNEL, "prm_%s", + data->name); + + prmd->dev = dev; + prmd->prm = prm; + prmd->cap = prmd->prm->data->dmap; + prmd->pwrstctrl = prmd->prm->data->pwrstctrl; + prmd->pwrstst = prmd->prm->data->pwrstst; + + prmd->pd.name = name; + prmd->pd.power_on = omap_prm_domain_power_on; + prmd->pd.power_off = omap_prm_domain_power_off; + prmd->pd.attach_dev = omap_prm_domain_attach_dev; + prmd->pd.detach_dev = omap_prm_domain_detach_dev; + + pm_genpd_init(&prmd->pd, NULL, true); + error = of_genpd_add_provider_simple(np, &prmd->pd); + if (error) + pm_genpd_remove(&prmd->pd); + else + prm->prmd = prmd; + + return error; +} + static bool _is_valid_reset(struct omap_reset_data *reset, unsigned long id) { if (reset->mask & BIT(id)) @@ -351,6 +604,7 @@ static int omap_prm_probe(struct platform_device *pdev) const struct omap_prm_data *data; struct omap_prm *prm; const struct of_device_id *match; + int ret; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!res) @@ -378,7 +632,21 @@ static int omap_prm_probe(struct platform_device *pdev) if (IS_ERR(prm->base)) return PTR_ERR(prm->base); - return omap_prm_reset_init(pdev, prm); + ret = omap_prm_domain_init(&pdev->dev, prm); + if (ret) + return ret; + + ret = omap_prm_reset_init(pdev, prm); + if (ret) + goto err_domain; + + return 0; + +err_domain: + of_genpd_del_provider(pdev->dev.of_node); + pm_genpd_remove(&prm->prmd->pd); + + return ret; } static struct platform_driver omap_prm_driver = { diff --git a/drivers/soc/ti/pm33xx.c b/drivers/soc/ti/pm33xx.c index de0123ec8ad6..d2f5e7001a93 100644 --- a/drivers/soc/ti/pm33xx.c +++ b/drivers/soc/ti/pm33xx.c @@ -16,6 +16,7 @@ #include <linux/module.h> #include <linux/nvmem-consumer.h> #include <linux/of.h> +#include <linux/of_address.h> #include <linux/platform_data/pm33xx.h> #include <linux/platform_device.h> #include <linux/rtc.h> @@ -39,6 +40,8 @@ #define GIC_INT_SET_PENDING_BASE 0x200 #define AM43XX_GIC_DIST_BASE 0x48241000 +static void __iomem *rtc_base_virt; +static struct clk *rtc_fck; static u32 rtc_magic_val; static int (*am33xx_do_wfi_sram)(unsigned long unused); @@ -90,7 +93,7 @@ static int am33xx_push_sram_idle(void) ro_sram_data.amx3_pm_sram_data_virt = ocmcram_location_data; ro_sram_data.amx3_pm_sram_data_phys = gen_pool_virt_to_phys(sram_pool_data, ocmcram_location_data); - ro_sram_data.rtc_base_virt = pm_ops->get_rtc_base_addr(); + ro_sram_data.rtc_base_virt = rtc_base_virt; /* Save physical address to calculate resume offset during pm init */ am33xx_do_wfi_sram_phys = gen_pool_virt_to_phys(sram_pool, @@ -158,7 +161,7 @@ static struct wkup_m3_wakeup_src rtc_wake_src(void) { u32 i; - i = __raw_readl(pm_ops->get_rtc_base_addr() + 0x44) & 0x40; + i = __raw_readl(rtc_base_virt + 0x44) & 0x40; if (i) { retrigger_irq = rtc_alarm_wakeup.irq_nr; @@ -177,13 +180,24 @@ static int am33xx_rtc_only_idle(unsigned long wfi_flags) return 0; } +/* + * Note that the RTC module clock must be re-enabled only for rtc+ddr suspend. + * And looks like the module can stay in SYSC_IDLE_SMART_WKUP mode configured + * by the interconnect code just fine for both rtc+ddr suspend and retention + * suspend. + */ static int am33xx_pm_suspend(suspend_state_t suspend_state) { int i, ret = 0; if (suspend_state == PM_SUSPEND_MEM && pm_ops->check_off_mode_enable()) { - pm_ops->prepare_rtc_suspend(); + ret = clk_prepare_enable(rtc_fck); + if (ret) { + dev_err(pm33xx_dev, "Failed to enable clock: %i\n", ret); + return ret; + } + pm_ops->save_context(); suspend_wfi_flags |= WFI_FLAG_RTC_ONLY; clk_save_context(); @@ -236,7 +250,7 @@ static int am33xx_pm_suspend(suspend_state_t suspend_state) } if (suspend_state == PM_SUSPEND_MEM && pm_ops->check_off_mode_enable()) - pm_ops->prepare_rtc_resume(); + clk_disable_unprepare(rtc_fck); return ret; } @@ -425,14 +439,28 @@ static int am33xx_pm_rtc_setup(void) struct device_node *np; unsigned long val = 0; struct nvmem_device *nvmem; + int error; np = of_find_node_by_name(NULL, "rtc"); if (of_device_is_available(np)) { + /* RTC interconnect target module clock */ + rtc_fck = of_clk_get_by_name(np->parent, "fck"); + if (IS_ERR(rtc_fck)) + return PTR_ERR(rtc_fck); + + rtc_base_virt = of_iomap(np, 0); + if (!rtc_base_virt) { + pr_warn("PM: could not iomap rtc"); + error = -ENODEV; + goto err_clk_put; + } + omap_rtc = rtc_class_open("rtc0"); if (!omap_rtc) { pr_warn("PM: rtc0 not available"); - return -EPROBE_DEFER; + error = -EPROBE_DEFER; + goto err_iounmap; } nvmem = devm_nvmem_device_get(&omap_rtc->dev, @@ -454,6 +482,13 @@ static int am33xx_pm_rtc_setup(void) } return 0; + +err_iounmap: + iounmap(rtc_base_virt); +err_clk_put: + clk_put(rtc_fck); + + return error; } static int am33xx_pm_probe(struct platform_device *pdev) @@ -544,6 +579,8 @@ static int am33xx_pm_remove(struct platform_device *pdev) suspend_set_ops(NULL); wkup_m3_ipc_put(m3_ipc); am33xx_pm_free_sram(); + iounmap(rtc_base_virt); + clk_put(rtc_fck); return 0; } diff --git a/drivers/soc/versatile/soc-integrator.c b/drivers/soc/versatile/soc-integrator.c index 7dcf77ccd31e..bab4ad87aa75 100644 --- a/drivers/soc/versatile/soc-integrator.c +++ b/drivers/soc/versatile/soc-integrator.c @@ -100,7 +100,7 @@ ATTRIBUTE_GROUPS(integrator); static int __init integrator_soc_init(void) { - static struct regmap *syscon_regmap; + struct regmap *syscon_regmap; struct soc_device *soc_dev; struct soc_device_attribute *soc_dev_attr; struct device_node *np; diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index d2c976e55b8b..5cff60de8e83 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -709,7 +709,7 @@ config SPI_S3C24XX_FIQ config SPI_S3C64XX tristate "Samsung S3C64XX series type SPI" - depends on (PLAT_SAMSUNG || ARCH_EXYNOS || COMPILE_TEST) + depends on (PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST) help SPI driver for Samsung S3C64XX and newer SoCs. diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile index 21dc75842aca..6fea5821662e 100644 --- a/drivers/spi/Makefile +++ b/drivers/spi/Makefile @@ -98,7 +98,6 @@ obj-$(CONFIG_SPI_RPCIF) += spi-rpc-if.o obj-$(CONFIG_SPI_RSPI) += spi-rspi.o obj-$(CONFIG_SPI_S3C24XX) += spi-s3c24xx-hw.o spi-s3c24xx-hw-y := spi-s3c24xx.o -spi-s3c24xx-hw-$(CONFIG_SPI_S3C24XX_FIQ) += spi-s3c24xx-fiq.o obj-$(CONFIG_SPI_S3C64XX) += spi-s3c64xx.o obj-$(CONFIG_SPI_SC18IS602) += spi-sc18is602.o obj-$(CONFIG_SPI_SH) += spi-sh.o diff --git a/drivers/spi/spi-s3c24xx-fiq.S b/drivers/spi/spi-s3c24xx-fiq.S deleted file mode 100644 index e95d6282109e..000000000000 --- a/drivers/spi/spi-s3c24xx-fiq.S +++ /dev/null @@ -1,113 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* linux/drivers/spi/spi_s3c24xx_fiq.S - * - * Copyright 2009 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * S3C24XX SPI - FIQ pseudo-DMA transfer code -*/ - -#include <linux/linkage.h> -#include <asm/assembler.h> - -#include <mach/map.h> -#include <mach/regs-irq.h> -#include <plat/regs-spi.h> - -#include "spi-s3c24xx-fiq.h" - - .text - - @ entry to these routines is as follows, with the register names - @ defined in fiq.h so that they can be shared with the C files which - @ setup the calling registers. - @ - @ fiq_rirq The base of the IRQ registers to find S3C2410_SRCPND - @ fiq_rtmp Temporary register to hold tx/rx data - @ fiq_rspi The base of the SPI register block - @ fiq_rtx The tx buffer pointer - @ fiq_rrx The rx buffer pointer - @ fiq_rcount The number of bytes to move - - @ each entry starts with a word entry of how long it is - @ and an offset to the irq acknowledgment word - -ENTRY(s3c24xx_spi_fiq_rx) -s3c24xx_spi_fix_rx: - .word fiq_rx_end - fiq_rx_start - .word fiq_rx_irq_ack - fiq_rx_start -fiq_rx_start: - ldr fiq_rtmp, fiq_rx_irq_ack - str fiq_rtmp, [ fiq_rirq, # S3C2410_SRCPND - S3C24XX_VA_IRQ ] - - ldrb fiq_rtmp, [ fiq_rspi, # S3C2410_SPRDAT ] - strb fiq_rtmp, [ fiq_rrx ], #1 - - mov fiq_rtmp, #0xff - strb fiq_rtmp, [ fiq_rspi, # S3C2410_SPTDAT ] - - subs fiq_rcount, fiq_rcount, #1 - subnes pc, lr, #4 @@ return, still have work to do - - @@ set IRQ controller so that next op will trigger IRQ - mov fiq_rtmp, #0 - str fiq_rtmp, [ fiq_rirq, # S3C2410_INTMOD - S3C24XX_VA_IRQ ] - subs pc, lr, #4 - -fiq_rx_irq_ack: - .word 0 -fiq_rx_end: - -ENTRY(s3c24xx_spi_fiq_txrx) -s3c24xx_spi_fiq_txrx: - .word fiq_txrx_end - fiq_txrx_start - .word fiq_txrx_irq_ack - fiq_txrx_start -fiq_txrx_start: - - ldrb fiq_rtmp, [ fiq_rspi, # S3C2410_SPRDAT ] - strb fiq_rtmp, [ fiq_rrx ], #1 - - ldr fiq_rtmp, fiq_txrx_irq_ack - str fiq_rtmp, [ fiq_rirq, # S3C2410_SRCPND - S3C24XX_VA_IRQ ] - - ldrb fiq_rtmp, [ fiq_rtx ], #1 - strb fiq_rtmp, [ fiq_rspi, # S3C2410_SPTDAT ] - - subs fiq_rcount, fiq_rcount, #1 - subnes pc, lr, #4 @@ return, still have work to do - - mov fiq_rtmp, #0 - str fiq_rtmp, [ fiq_rirq, # S3C2410_INTMOD - S3C24XX_VA_IRQ ] - subs pc, lr, #4 - -fiq_txrx_irq_ack: - .word 0 - -fiq_txrx_end: - -ENTRY(s3c24xx_spi_fiq_tx) -s3c24xx_spi_fix_tx: - .word fiq_tx_end - fiq_tx_start - .word fiq_tx_irq_ack - fiq_tx_start -fiq_tx_start: - ldrb fiq_rtmp, [ fiq_rspi, # S3C2410_SPRDAT ] - - ldr fiq_rtmp, fiq_tx_irq_ack - str fiq_rtmp, [ fiq_rirq, # S3C2410_SRCPND - S3C24XX_VA_IRQ ] - - ldrb fiq_rtmp, [ fiq_rtx ], #1 - strb fiq_rtmp, [ fiq_rspi, # S3C2410_SPTDAT ] - - subs fiq_rcount, fiq_rcount, #1 - subnes pc, lr, #4 @@ return, still have work to do - - mov fiq_rtmp, #0 - str fiq_rtmp, [ fiq_rirq, # S3C2410_INTMOD - S3C24XX_VA_IRQ ] - subs pc, lr, #4 - -fiq_tx_irq_ack: - .word 0 - -fiq_tx_end: - - .end diff --git a/drivers/spi/spi-s3c24xx-fiq.h b/drivers/spi/spi-s3c24xx-fiq.h deleted file mode 100644 index 7786b0ea56ec..000000000000 --- a/drivers/spi/spi-s3c24xx-fiq.h +++ /dev/null @@ -1,23 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* linux/drivers/spi/spi_s3c24xx_fiq.h - * - * Copyright 2009 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * S3C24XX SPI - FIQ pseudo-DMA transfer support -*/ - -/* We have R8 through R13 to play with */ - -#ifdef __ASSEMBLY__ -#define __REG_NR(x) r##x -#else -#define __REG_NR(x) (x) -#endif - -#define fiq_rspi __REG_NR(8) -#define fiq_rtmp __REG_NR(9) -#define fiq_rrx __REG_NR(10) -#define fiq_rtx __REG_NR(11) -#define fiq_rcount __REG_NR(12) -#define fiq_rirq __REG_NR(13) diff --git a/drivers/spi/spi-s3c24xx-regs.h b/drivers/spi/spi-s3c24xx-regs.h new file mode 100644 index 000000000000..f51464ab5677 --- /dev/null +++ b/drivers/spi/spi-s3c24xx-regs.h @@ -0,0 +1,41 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2004 Fetron GmbH + * + * S3C2410 SPI register definition + */ + +#ifndef __SPI_S3C2410_H +#define __SPI_S3C2410_H + +#define S3C2410_SPCON (0x00) + +#define S3C2410_SPCON_SMOD_DMA (2 << 5) /* DMA mode */ +#define S3C2410_SPCON_SMOD_INT (1 << 5) /* interrupt mode */ +#define S3C2410_SPCON_SMOD_POLL (0 << 5) /* polling mode */ +#define S3C2410_SPCON_ENSCK (1 << 4) /* Enable SCK */ +#define S3C2410_SPCON_MSTR (1 << 3) /* Master:1, Slave:0 select */ +#define S3C2410_SPCON_CPOL_HIGH (1 << 2) /* Clock polarity select */ +#define S3C2410_SPCON_CPOL_LOW (0 << 2) /* Clock polarity select */ + +#define S3C2410_SPCON_CPHA_FMTB (1 << 1) /* Clock Phase Select */ +#define S3C2410_SPCON_CPHA_FMTA (0 << 1) /* Clock Phase Select */ + +#define S3C2410_SPSTA (0x04) + +#define S3C2410_SPSTA_DCOL (1 << 2) /* Data Collision Error */ +#define S3C2410_SPSTA_MULD (1 << 1) /* Multi Master Error */ +#define S3C2410_SPSTA_READY (1 << 0) /* Data Tx/Rx ready */ +#define S3C2412_SPSTA_READY_ORG (1 << 3) + +#define S3C2410_SPPIN (0x08) + +#define S3C2410_SPPIN_ENMUL (1 << 2) /* Multi Master Error detect */ +#define S3C2410_SPPIN_RESERVED (1 << 1) +#define S3C2410_SPPIN_KEEP (1 << 0) /* Master Out keep */ + +#define S3C2410_SPPRE (0x0C) +#define S3C2410_SPTDAT (0x10) +#define S3C2410_SPRDAT (0x14) + +#endif /* __SPI_S3C2410_H */ diff --git a/drivers/spi/spi-s3c24xx.c b/drivers/spi/spi-s3c24xx.c index 7742170fca91..d6f51695ca5b 100644 --- a/drivers/spi/spi-s3c24xx.c +++ b/drivers/spi/spi-s3c24xx.c @@ -19,13 +19,12 @@ #include <linux/spi/spi.h> #include <linux/spi/spi_bitbang.h> #include <linux/spi/s3c24xx.h> +#include <linux/spi/s3c24xx-fiq.h> #include <linux/module.h> -#include <plat/regs-spi.h> - #include <asm/fiq.h> -#include "spi-s3c24xx-fiq.h" +#include "spi-s3c24xx-regs.h" /** * struct s3c24xx_spi_devstate - per device data @@ -230,21 +229,6 @@ struct spi_fiq_code { u8 data[]; }; -extern struct spi_fiq_code s3c24xx_spi_fiq_txrx; -extern struct spi_fiq_code s3c24xx_spi_fiq_tx; -extern struct spi_fiq_code s3c24xx_spi_fiq_rx; - -/** - * ack_bit - turn IRQ into IRQ acknowledgement bit - * @irq: The interrupt number - * - * Returns the bit to write to the interrupt acknowledge register. - */ -static inline u32 ack_bit(unsigned int irq) -{ - return 1 << (irq - IRQ_EINT0); -} - /** * s3c24xx_spi_tryfiq - attempt to claim and setup FIQ for transfer * @hw: The hardware state. @@ -261,6 +245,7 @@ static void s3c24xx_spi_tryfiq(struct s3c24xx_spi *hw) struct pt_regs regs; enum spi_fiq_mode mode; struct spi_fiq_code *code; + u32 *ack_ptr = NULL; int ret; if (!hw->fiq_claimed) { @@ -283,13 +268,10 @@ static void s3c24xx_spi_tryfiq(struct s3c24xx_spi *hw) regs.uregs[fiq_rrx] = (long)hw->rx; regs.uregs[fiq_rtx] = (long)hw->tx + 1; regs.uregs[fiq_rcount] = hw->len - 1; - regs.uregs[fiq_rirq] = (long)S3C24XX_VA_IRQ; set_fiq_regs(®s); if (hw->fiq_mode != mode) { - u32 *ack_ptr; - hw->fiq_mode = mode; switch (mode) { @@ -309,12 +291,10 @@ static void s3c24xx_spi_tryfiq(struct s3c24xx_spi *hw) BUG_ON(!code); ack_ptr = (u32 *)&code->data[code->ack_offset]; - *ack_ptr = ack_bit(hw->irq); - set_fiq_handler(&code->data, code->length); } - s3c24xx_set_fiq(hw->irq, true); + s3c24xx_set_fiq(hw->irq, ack_ptr, true); hw->fiq_mode = mode; hw->fiq_inuse = 1; diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index 20b98a3ba046..1044fc387691 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -236,7 +236,7 @@ config SERIAL_CLPS711X_CONSOLE config SERIAL_SAMSUNG tristate "Samsung SoC serial support" - depends on PLAT_SAMSUNG || ARCH_EXYNOS || COMPILE_TEST + depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST select SERIAL_CORE help Support for the on-chip UARTs on the Samsung S3C24XX series CPUs, diff --git a/drivers/usb/gadget/udc/s3c-hsudc.c b/drivers/usb/gadget/udc/s3c-hsudc.c index aaca1b0a2f59..7bd5182ce3ef 100644 --- a/drivers/usb/gadget/udc/s3c-hsudc.c +++ b/drivers/usb/gadget/udc/s3c-hsudc.c @@ -30,8 +30,6 @@ #include <linux/regulator/consumer.h> #include <linux/pm_runtime.h> -#include <mach/regs-s3c2443-clock.h> - #define S3C_HSUDC_REG(x) (x) /* Non-Indexed Registers */ @@ -186,53 +184,6 @@ static inline void __orr32(void __iomem *ptr, u32 val) writel(readl(ptr) | val, ptr); } -static void s3c_hsudc_init_phy(void) -{ - u32 cfg; - - cfg = readl(S3C2443_PWRCFG) | S3C2443_PWRCFG_USBPHY; - writel(cfg, S3C2443_PWRCFG); - - cfg = readl(S3C2443_URSTCON); - cfg |= (S3C2443_URSTCON_FUNCRST | S3C2443_URSTCON_PHYRST); - writel(cfg, S3C2443_URSTCON); - mdelay(1); - - cfg = readl(S3C2443_URSTCON); - cfg &= ~(S3C2443_URSTCON_FUNCRST | S3C2443_URSTCON_PHYRST); - writel(cfg, S3C2443_URSTCON); - - cfg = readl(S3C2443_PHYCTRL); - cfg &= ~(S3C2443_PHYCTRL_CLKSEL | S3C2443_PHYCTRL_DSPORT); - cfg |= (S3C2443_PHYCTRL_EXTCLK | S3C2443_PHYCTRL_PLLSEL); - writel(cfg, S3C2443_PHYCTRL); - - cfg = readl(S3C2443_PHYPWR); - cfg &= ~(S3C2443_PHYPWR_FSUSPEND | S3C2443_PHYPWR_PLL_PWRDN | - S3C2443_PHYPWR_XO_ON | S3C2443_PHYPWR_PLL_REFCLK | - S3C2443_PHYPWR_ANALOG_PD); - cfg |= S3C2443_PHYPWR_COMMON_ON; - writel(cfg, S3C2443_PHYPWR); - - cfg = readl(S3C2443_UCLKCON); - cfg |= (S3C2443_UCLKCON_DETECT_VBUS | S3C2443_UCLKCON_FUNC_CLKEN | - S3C2443_UCLKCON_TCLKEN); - writel(cfg, S3C2443_UCLKCON); -} - -static void s3c_hsudc_uninit_phy(void) -{ - u32 cfg; - - cfg = readl(S3C2443_PWRCFG) & ~S3C2443_PWRCFG_USBPHY; - writel(cfg, S3C2443_PWRCFG); - - writel(S3C2443_PHYPWR_FSUSPEND, S3C2443_PHYPWR); - - cfg = readl(S3C2443_UCLKCON) & ~S3C2443_UCLKCON_FUNC_CLKEN; - writel(cfg, S3C2443_UCLKCON); -} - /** * s3c_hsudc_complete_request - Complete a transfer request. * @hsep: Endpoint to which the request belongs. @@ -1188,7 +1139,8 @@ static int s3c_hsudc_start(struct usb_gadget *gadget, pm_runtime_get_sync(hsudc->dev); - s3c_hsudc_init_phy(); + if (hsudc->pd->phy_init) + hsudc->pd->phy_init(); if (hsudc->pd->gpio_init) hsudc->pd->gpio_init(); @@ -1210,7 +1162,8 @@ static int s3c_hsudc_stop(struct usb_gadget *gadget) spin_lock_irqsave(&hsudc->lock, flags); hsudc->gadget.speed = USB_SPEED_UNKNOWN; - s3c_hsudc_uninit_phy(); + if (hsudc->pd->phy_uninit) + hsudc->pd->phy_uninit(); pm_runtime_put(hsudc->dev); diff --git a/drivers/usb/gadget/udc/s3c2410_udc.c b/drivers/usb/gadget/udc/s3c2410_udc.c index e875a0b967c0..f1ea51476add 100644 --- a/drivers/usb/gadget/udc/s3c2410_udc.c +++ b/drivers/usb/gadget/udc/s3c2410_udc.c @@ -36,15 +36,11 @@ #include <asm/byteorder.h> #include <asm/irq.h> #include <asm/unaligned.h> -#include <mach/irqs.h> -#include <mach/hardware.h> - -#include <plat/regs-udc.h> #include <linux/platform_data/usb-s3c2410_udc.h> - #include "s3c2410_udc.h" +#include "s3c2410_udc_regs.h" #define DRIVER_DESC "S3C2410 USB Device Controller Gadget" #define DRIVER_AUTHOR "Herbert Pötzl <herbert@13thfloor.at>, " \ @@ -57,6 +53,7 @@ static struct s3c2410_udc *the_controller; static struct clk *udc_clock; static struct clk *usb_bus_clock; static void __iomem *base_addr; +static int irq_usbd; static u64 rsrc_start; static u64 rsrc_len; static struct dentry *s3c2410_udc_debugfs_root; @@ -835,8 +832,6 @@ static void s3c2410_udc_handle_ep(struct s3c2410_ep *ep) } } -#include <mach/regs-irq.h> - /* * s3c2410_udc_irq - interrupt handler */ @@ -977,7 +972,7 @@ static irqreturn_t s3c2410_udc_irq(int dummy, void *_dev) } } - dprintk(DEBUG_VERBOSE, "irq: %d s3c2410_udc_done.\n", IRQ_USBD); + dprintk(DEBUG_VERBOSE, "irq: %d s3c2410_udc_done.\n", irq_usbd); /* Restore old index */ udc_write(idx, S3C2410_UDC_INDEX_REG); @@ -1777,13 +1772,7 @@ static int s3c2410_udc_probe(struct platform_device *pdev) spin_lock_init(&udc->lock); udc_info = dev_get_platdata(&pdev->dev); - rsrc_start = S3C2410_PA_USBDEV; - rsrc_len = S3C24XX_SZ_USBDEV; - - if (!request_mem_region(rsrc_start, rsrc_len, gadget_name)) - return -EBUSY; - - base_addr = ioremap(rsrc_start, rsrc_len); + base_addr = devm_platform_ioremap_resource(pdev, 0); if (!base_addr) { retval = -ENOMEM; goto err_mem; @@ -1795,17 +1784,19 @@ static int s3c2410_udc_probe(struct platform_device *pdev) s3c2410_udc_disable(udc); s3c2410_udc_reinit(udc); + irq_usbd = platform_get_irq(pdev, 0); + /* irq setup after old hardware state is cleaned up */ - retval = request_irq(IRQ_USBD, s3c2410_udc_irq, + retval = request_irq(irq_usbd, s3c2410_udc_irq, 0, gadget_name, udc); if (retval != 0) { - dev_err(dev, "cannot get irq %i, err %d\n", IRQ_USBD, retval); + dev_err(dev, "cannot get irq %i, err %d\n", irq_usbd, retval); retval = -EBUSY; goto err_map; } - dev_dbg(dev, "got irq %i\n", IRQ_USBD); + dev_dbg(dev, "got irq %i\n", irq_usbd); if (udc_info && udc_info->vbus_pin > 0) { retval = gpio_request(udc_info->vbus_pin, "udc vbus"); @@ -1872,7 +1863,7 @@ err_gpio_claim: if (udc_info && udc_info->vbus_pin > 0) gpio_free(udc_info->vbus_pin); err_int: - free_irq(IRQ_USBD, udc); + free_irq(irq_usbd, udc); err_map: iounmap(base_addr); err_mem: @@ -1906,7 +1897,7 @@ static int s3c2410_udc_remove(struct platform_device *pdev) free_irq(irq, udc); } - free_irq(IRQ_USBD, udc); + free_irq(irq_usbd, udc); iounmap(base_addr); release_mem_region(rsrc_start, rsrc_len); diff --git a/drivers/usb/gadget/udc/s3c2410_udc.h b/drivers/usb/gadget/udc/s3c2410_udc.h index bdcaa8dd300f..68bdf3e5aac2 100644 --- a/drivers/usb/gadget/udc/s3c2410_udc.h +++ b/drivers/usb/gadget/udc/s3c2410_udc.h @@ -90,6 +90,7 @@ struct s3c2410_udc { unsigned req_pending : 1; u8 vbus; struct dentry *regs_info; + int irq; }; #define to_s3c2410(g) (container_of((g), struct s3c2410_udc, gadget)) diff --git a/drivers/usb/gadget/udc/s3c2410_udc_regs.h b/drivers/usb/gadget/udc/s3c2410_udc_regs.h new file mode 100644 index 000000000000..d8d2eeaca088 --- /dev/null +++ b/drivers/usb/gadget/udc/s3c2410_udc_regs.h @@ -0,0 +1,146 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright (C) 2004 Herbert Poetzl <herbert@13thfloor.at> + */ + +#ifndef __ASM_ARCH_REGS_UDC_H +#define __ASM_ARCH_REGS_UDC_H + +#define S3C2410_USBDREG(x) (x) + +#define S3C2410_UDC_FUNC_ADDR_REG S3C2410_USBDREG(0x0140) +#define S3C2410_UDC_PWR_REG S3C2410_USBDREG(0x0144) +#define S3C2410_UDC_EP_INT_REG S3C2410_USBDREG(0x0148) + +#define S3C2410_UDC_USB_INT_REG S3C2410_USBDREG(0x0158) +#define S3C2410_UDC_EP_INT_EN_REG S3C2410_USBDREG(0x015c) + +#define S3C2410_UDC_USB_INT_EN_REG S3C2410_USBDREG(0x016c) + +#define S3C2410_UDC_FRAME_NUM1_REG S3C2410_USBDREG(0x0170) +#define S3C2410_UDC_FRAME_NUM2_REG S3C2410_USBDREG(0x0174) + +#define S3C2410_UDC_EP0_FIFO_REG S3C2410_USBDREG(0x01c0) +#define S3C2410_UDC_EP1_FIFO_REG S3C2410_USBDREG(0x01c4) +#define S3C2410_UDC_EP2_FIFO_REG S3C2410_USBDREG(0x01c8) +#define S3C2410_UDC_EP3_FIFO_REG S3C2410_USBDREG(0x01cc) +#define S3C2410_UDC_EP4_FIFO_REG S3C2410_USBDREG(0x01d0) + +#define S3C2410_UDC_EP1_DMA_CON S3C2410_USBDREG(0x0200) +#define S3C2410_UDC_EP1_DMA_UNIT S3C2410_USBDREG(0x0204) +#define S3C2410_UDC_EP1_DMA_FIFO S3C2410_USBDREG(0x0208) +#define S3C2410_UDC_EP1_DMA_TTC_L S3C2410_USBDREG(0x020c) +#define S3C2410_UDC_EP1_DMA_TTC_M S3C2410_USBDREG(0x0210) +#define S3C2410_UDC_EP1_DMA_TTC_H S3C2410_USBDREG(0x0214) + +#define S3C2410_UDC_EP2_DMA_CON S3C2410_USBDREG(0x0218) +#define S3C2410_UDC_EP2_DMA_UNIT S3C2410_USBDREG(0x021c) +#define S3C2410_UDC_EP2_DMA_FIFO S3C2410_USBDREG(0x0220) +#define S3C2410_UDC_EP2_DMA_TTC_L S3C2410_USBDREG(0x0224) +#define S3C2410_UDC_EP2_DMA_TTC_M S3C2410_USBDREG(0x0228) +#define S3C2410_UDC_EP2_DMA_TTC_H S3C2410_USBDREG(0x022c) + +#define S3C2410_UDC_EP3_DMA_CON S3C2410_USBDREG(0x0240) +#define S3C2410_UDC_EP3_DMA_UNIT S3C2410_USBDREG(0x0244) +#define S3C2410_UDC_EP3_DMA_FIFO S3C2410_USBDREG(0x0248) +#define S3C2410_UDC_EP3_DMA_TTC_L S3C2410_USBDREG(0x024c) +#define S3C2410_UDC_EP3_DMA_TTC_M S3C2410_USBDREG(0x0250) +#define S3C2410_UDC_EP3_DMA_TTC_H S3C2410_USBDREG(0x0254) + +#define S3C2410_UDC_EP4_DMA_CON S3C2410_USBDREG(0x0258) +#define S3C2410_UDC_EP4_DMA_UNIT S3C2410_USBDREG(0x025c) +#define S3C2410_UDC_EP4_DMA_FIFO S3C2410_USBDREG(0x0260) +#define S3C2410_UDC_EP4_DMA_TTC_L S3C2410_USBDREG(0x0264) +#define S3C2410_UDC_EP4_DMA_TTC_M S3C2410_USBDREG(0x0268) +#define S3C2410_UDC_EP4_DMA_TTC_H S3C2410_USBDREG(0x026c) + +#define S3C2410_UDC_INDEX_REG S3C2410_USBDREG(0x0178) + +/* indexed registers */ + +#define S3C2410_UDC_MAXP_REG S3C2410_USBDREG(0x0180) + +#define S3C2410_UDC_EP0_CSR_REG S3C2410_USBDREG(0x0184) + +#define S3C2410_UDC_IN_CSR1_REG S3C2410_USBDREG(0x0184) +#define S3C2410_UDC_IN_CSR2_REG S3C2410_USBDREG(0x0188) + +#define S3C2410_UDC_OUT_CSR1_REG S3C2410_USBDREG(0x0190) +#define S3C2410_UDC_OUT_CSR2_REG S3C2410_USBDREG(0x0194) +#define S3C2410_UDC_OUT_FIFO_CNT1_REG S3C2410_USBDREG(0x0198) +#define S3C2410_UDC_OUT_FIFO_CNT2_REG S3C2410_USBDREG(0x019c) + +#define S3C2410_UDC_FUNCADDR_UPDATE (1 << 7) + +#define S3C2410_UDC_PWR_ISOUP (1 << 7) /* R/W */ +#define S3C2410_UDC_PWR_RESET (1 << 3) /* R */ +#define S3C2410_UDC_PWR_RESUME (1 << 2) /* R/W */ +#define S3C2410_UDC_PWR_SUSPEND (1 << 1) /* R */ +#define S3C2410_UDC_PWR_ENSUSPEND (1 << 0) /* R/W */ + +#define S3C2410_UDC_PWR_DEFAULT (0x00) + +#define S3C2410_UDC_INT_EP4 (1 << 4) /* R/W (clear only) */ +#define S3C2410_UDC_INT_EP3 (1 << 3) /* R/W (clear only) */ +#define S3C2410_UDC_INT_EP2 (1 << 2) /* R/W (clear only) */ +#define S3C2410_UDC_INT_EP1 (1 << 1) /* R/W (clear only) */ +#define S3C2410_UDC_INT_EP0 (1 << 0) /* R/W (clear only) */ + +#define S3C2410_UDC_USBINT_RESET (1 << 2) /* R/W (clear only) */ +#define S3C2410_UDC_USBINT_RESUME (1 << 1) /* R/W (clear only) */ +#define S3C2410_UDC_USBINT_SUSPEND (1 << 0) /* R/W (clear only) */ + +#define S3C2410_UDC_INTE_EP4 (1 << 4) /* R/W */ +#define S3C2410_UDC_INTE_EP3 (1 << 3) /* R/W */ +#define S3C2410_UDC_INTE_EP2 (1 << 2) /* R/W */ +#define S3C2410_UDC_INTE_EP1 (1 << 1) /* R/W */ +#define S3C2410_UDC_INTE_EP0 (1 << 0) /* R/W */ + +#define S3C2410_UDC_USBINTE_RESET (1 << 2) /* R/W */ +#define S3C2410_UDC_USBINTE_SUSPEND (1 << 0) /* R/W */ + +#define S3C2410_UDC_INDEX_EP0 (0x00) +#define S3C2410_UDC_INDEX_EP1 (0x01) +#define S3C2410_UDC_INDEX_EP2 (0x02) +#define S3C2410_UDC_INDEX_EP3 (0x03) +#define S3C2410_UDC_INDEX_EP4 (0x04) + +#define S3C2410_UDC_ICSR1_CLRDT (1 << 6) /* R/W */ +#define S3C2410_UDC_ICSR1_SENTSTL (1 << 5) /* R/W (clear only) */ +#define S3C2410_UDC_ICSR1_SENDSTL (1 << 4) /* R/W */ +#define S3C2410_UDC_ICSR1_FFLUSH (1 << 3) /* W (set only) */ +#define S3C2410_UDC_ICSR1_UNDRUN (1 << 2) /* R/W (clear only) */ +#define S3C2410_UDC_ICSR1_PKTRDY (1 << 0) /* R/W (set only) */ + +#define S3C2410_UDC_ICSR2_AUTOSET (1 << 7) /* R/W */ +#define S3C2410_UDC_ICSR2_ISO (1 << 6) /* R/W */ +#define S3C2410_UDC_ICSR2_MODEIN (1 << 5) /* R/W */ +#define S3C2410_UDC_ICSR2_DMAIEN (1 << 4) /* R/W */ + +#define S3C2410_UDC_OCSR1_CLRDT (1 << 7) /* R/W */ +#define S3C2410_UDC_OCSR1_SENTSTL (1 << 6) /* R/W (clear only) */ +#define S3C2410_UDC_OCSR1_SENDSTL (1 << 5) /* R/W */ +#define S3C2410_UDC_OCSR1_FFLUSH (1 << 4) /* R/W */ +#define S3C2410_UDC_OCSR1_DERROR (1 << 3) /* R */ +#define S3C2410_UDC_OCSR1_OVRRUN (1 << 2) /* R/W (clear only) */ +#define S3C2410_UDC_OCSR1_PKTRDY (1 << 0) /* R/W (clear only) */ + +#define S3C2410_UDC_OCSR2_AUTOCLR (1 << 7) /* R/W */ +#define S3C2410_UDC_OCSR2_ISO (1 << 6) /* R/W */ +#define S3C2410_UDC_OCSR2_DMAIEN (1 << 5) /* R/W */ + +#define S3C2410_UDC_EP0_CSR_OPKRDY (1 << 0) +#define S3C2410_UDC_EP0_CSR_IPKRDY (1 << 1) +#define S3C2410_UDC_EP0_CSR_SENTSTL (1 << 2) +#define S3C2410_UDC_EP0_CSR_DE (1 << 3) +#define S3C2410_UDC_EP0_CSR_SE (1 << 4) +#define S3C2410_UDC_EP0_CSR_SENDSTL (1 << 5) +#define S3C2410_UDC_EP0_CSR_SOPKTRDY (1 << 6) +#define S3C2410_UDC_EP0_CSR_SSE (1 << 7) + +#define S3C2410_UDC_MAXP_8 (1 << 0) +#define S3C2410_UDC_MAXP_16 (1 << 1) +#define S3C2410_UDC_MAXP_32 (1 << 2) +#define S3C2410_UDC_MAXP_64 (1 << 3) + +#endif diff --git a/drivers/video/fbdev/s3c2410fb-regs-lcd.h b/drivers/video/fbdev/s3c2410fb-regs-lcd.h new file mode 100644 index 000000000000..1e46f7a788e5 --- /dev/null +++ b/drivers/video/fbdev/s3c2410fb-regs-lcd.h @@ -0,0 +1,143 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk> + * http://www.simtec.co.uk/products/SWLINUX/ + */ + +#ifndef ___ASM_ARCH_REGS_LCD_H +#define ___ASM_ARCH_REGS_LCD_H + +/* + * a couple of values are used as platform data in + * include/linux/platform_data/fb-s3c2410.h and not + * duplicated here. + */ +#include <linux/platform_data/fb-s3c2410.h> + +#define S3C2410_LCDREG(x) (x) + +/* LCD control registers */ +#define S3C2410_LCDCON1 S3C2410_LCDREG(0x00) +#define S3C2410_LCDCON2 S3C2410_LCDREG(0x04) +#define S3C2410_LCDCON3 S3C2410_LCDREG(0x08) +#define S3C2410_LCDCON4 S3C2410_LCDREG(0x0C) +#define S3C2410_LCDCON5 S3C2410_LCDREG(0x10) + +#define S3C2410_LCDCON1_CLKVAL(x) ((x) << 8) +#define S3C2410_LCDCON1_MMODE (1<<7) +#define S3C2410_LCDCON1_DSCAN4 (0<<5) +#define S3C2410_LCDCON1_STN4 (1<<5) +#define S3C2410_LCDCON1_STN8 (2<<5) +#define S3C2410_LCDCON1_TFT (3<<5) + +#define S3C2410_LCDCON1_STN1BPP (0<<1) +#define S3C2410_LCDCON1_STN2GREY (1<<1) +#define S3C2410_LCDCON1_STN4GREY (2<<1) +#define S3C2410_LCDCON1_STN8BPP (3<<1) +#define S3C2410_LCDCON1_STN12BPP (4<<1) + +#define S3C2410_LCDCON1_ENVID (1) + +#define S3C2410_LCDCON1_MODEMASK 0x1E + +#define S3C2410_LCDCON2_VBPD(x) ((x) << 24) +#define S3C2410_LCDCON2_LINEVAL(x) ((x) << 14) +#define S3C2410_LCDCON2_VFPD(x) ((x) << 6) +#define S3C2410_LCDCON2_VSPW(x) ((x) << 0) + +#define S3C2410_LCDCON2_GET_VBPD(x) ( ((x) >> 24) & 0xFF) +#define S3C2410_LCDCON2_GET_VFPD(x) ( ((x) >> 6) & 0xFF) +#define S3C2410_LCDCON2_GET_VSPW(x) ( ((x) >> 0) & 0x3F) + +#define S3C2410_LCDCON3_HBPD(x) ((x) << 19) +#define S3C2410_LCDCON3_WDLY(x) ((x) << 19) +#define S3C2410_LCDCON3_HOZVAL(x) ((x) << 8) +#define S3C2410_LCDCON3_HFPD(x) ((x) << 0) +#define S3C2410_LCDCON3_LINEBLANK(x)((x) << 0) + +#define S3C2410_LCDCON3_GET_HBPD(x) ( ((x) >> 19) & 0x7F) +#define S3C2410_LCDCON3_GET_HFPD(x) ( ((x) >> 0) & 0xFF) + +/* LDCCON4 changes for STN mode on the S3C2412 */ + +#define S3C2410_LCDCON4_MVAL(x) ((x) << 8) +#define S3C2410_LCDCON4_HSPW(x) ((x) << 0) +#define S3C2410_LCDCON4_WLH(x) ((x) << 0) + +#define S3C2410_LCDCON4_GET_HSPW(x) ( ((x) >> 0) & 0xFF) + +/* framebuffer start addressed */ +#define S3C2410_LCDSADDR1 S3C2410_LCDREG(0x14) +#define S3C2410_LCDSADDR2 S3C2410_LCDREG(0x18) +#define S3C2410_LCDSADDR3 S3C2410_LCDREG(0x1C) + +#define S3C2410_LCDBANK(x) ((x) << 21) +#define S3C2410_LCDBASEU(x) (x) + +#define S3C2410_OFFSIZE(x) ((x) << 11) +#define S3C2410_PAGEWIDTH(x) (x) + +/* colour lookup and miscellaneous controls */ + +#define S3C2410_REDLUT S3C2410_LCDREG(0x20) +#define S3C2410_GREENLUT S3C2410_LCDREG(0x24) +#define S3C2410_BLUELUT S3C2410_LCDREG(0x28) + +#define S3C2410_DITHMODE S3C2410_LCDREG(0x4C) +#define S3C2410_TPAL S3C2410_LCDREG(0x50) + +#define S3C2410_TPAL_EN (1<<24) + +/* interrupt info */ +#define S3C2410_LCDINTPND S3C2410_LCDREG(0x54) +#define S3C2410_LCDSRCPND S3C2410_LCDREG(0x58) +#define S3C2410_LCDINTMSK S3C2410_LCDREG(0x5C) +#define S3C2410_LCDINT_FIWSEL (1<<2) +#define S3C2410_LCDINT_FRSYNC (1<<1) +#define S3C2410_LCDINT_FICNT (1<<0) + +/* s3c2442 extra stn registers */ + +#define S3C2442_REDLUT S3C2410_LCDREG(0x20) +#define S3C2442_GREENLUT S3C2410_LCDREG(0x24) +#define S3C2442_BLUELUT S3C2410_LCDREG(0x28) +#define S3C2442_DITHMODE S3C2410_LCDREG(0x20) + +#define S3C2410_LPCSEL S3C2410_LCDREG(0x60) + +#define S3C2410_TFTPAL(x) S3C2410_LCDREG((0x400 + (x)*4)) + +/* S3C2412 registers */ + +#define S3C2412_TPAL S3C2410_LCDREG(0x20) + +#define S3C2412_LCDINTPND S3C2410_LCDREG(0x24) +#define S3C2412_LCDSRCPND S3C2410_LCDREG(0x28) +#define S3C2412_LCDINTMSK S3C2410_LCDREG(0x2C) + +#define S3C2412_TCONSEL S3C2410_LCDREG(0x30) + +#define S3C2412_LCDCON6 S3C2410_LCDREG(0x34) +#define S3C2412_LCDCON7 S3C2410_LCDREG(0x38) +#define S3C2412_LCDCON8 S3C2410_LCDREG(0x3C) +#define S3C2412_LCDCON9 S3C2410_LCDREG(0x40) + +#define S3C2412_REDLUT(x) S3C2410_LCDREG(0x44 + ((x)*4)) +#define S3C2412_GREENLUT(x) S3C2410_LCDREG(0x60 + ((x)*4)) +#define S3C2412_BLUELUT(x) S3C2410_LCDREG(0x98 + ((x)*4)) + +#define S3C2412_FRCPAT(x) S3C2410_LCDREG(0xB4 + ((x)*4)) + +/* general registers */ + +/* base of the LCD registers, where INTPND, INTSRC and then INTMSK + * are available. */ + +#define S3C2410_LCDINTBASE S3C2410_LCDREG(0x54) +#define S3C2412_LCDINTBASE S3C2410_LCDREG(0x24) + +#define S3C24XX_LCDINTPND (0x00) +#define S3C24XX_LCDSRCPND (0x04) +#define S3C24XX_LCDINTMSK (0x08) + +#endif /* ___ASM_ARCH_REGS_LCD_H */ diff --git a/drivers/video/fbdev/s3c2410fb.c b/drivers/video/fbdev/s3c2410fb.c index 6f8fa501583f..d8ae5258de46 100644 --- a/drivers/video/fbdev/s3c2410fb.c +++ b/drivers/video/fbdev/s3c2410fb.c @@ -29,19 +29,18 @@ #include <linux/clk.h> #include <linux/cpufreq.h> #include <linux/io.h> +#include <linux/platform_data/fb-s3c2410.h> #include <asm/div64.h> #include <asm/mach/map.h> -#include <mach/regs-lcd.h> -#include <mach/regs-gpio.h> -#include <mach/fb.h> #ifdef CONFIG_PM #include <linux/pm.h> #endif #include "s3c2410fb.h" +#include "s3c2410fb-regs-lcd.h" /* Debugging stuff */ static int debug = IS_BUILTIN(CONFIG_FB_S3C2410_DEBUG); @@ -672,6 +671,9 @@ static inline void modify_gpio(void __iomem *reg, { unsigned long tmp; + if (!reg) + return; + tmp = readl(reg) & ~mask; writel(tmp | set, reg); } @@ -702,10 +704,10 @@ static int s3c2410fb_init_registers(struct fb_info *info) /* modify the gpio(s) with interrupts set (bjd) */ - modify_gpio(S3C2410_GPCUP, mach_info->gpcup, mach_info->gpcup_mask); - modify_gpio(S3C2410_GPCCON, mach_info->gpccon, mach_info->gpccon_mask); - modify_gpio(S3C2410_GPDUP, mach_info->gpdup, mach_info->gpdup_mask); - modify_gpio(S3C2410_GPDCON, mach_info->gpdcon, mach_info->gpdcon_mask); + modify_gpio(mach_info->gpcup_reg, mach_info->gpcup, mach_info->gpcup_mask); + modify_gpio(mach_info->gpccon_reg, mach_info->gpccon, mach_info->gpccon_mask); + modify_gpio(mach_info->gpdup_reg, mach_info->gpdup, mach_info->gpdup_mask); + modify_gpio(mach_info->gpdcon_reg, mach_info->gpdcon, mach_info->gpdcon_mask); local_irq_restore(flags); diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig index 21865e27499a..fd7968635e6d 100644 --- a/drivers/watchdog/Kconfig +++ b/drivers/watchdog/Kconfig @@ -489,16 +489,10 @@ config IXP4XX_WATCHDOG Say N if you are unsure. -config HAVE_S3C2410_WATCHDOG - bool - help - This will include watchdog timer support for Samsung SoCs. If - you want to include watchdog support for any machine, kindly - select this in the respective mach-XXXX/Kconfig file. - config S3C2410_WATCHDOG tristate "S3C2410 Watchdog" - depends on HAVE_S3C2410_WATCHDOG || COMPILE_TEST + depends on ARCH_S3C24XX || ARCH_S3C64XX || ARCH_S5PV210 || ARCH_EXYNOS || \ + COMPILE_TEST select WATCHDOG_CORE select MFD_SYSCON if ARCH_EXYNOS help |