diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/net/ixgbe/ixgbe_82598.c | 8 | ||||
| -rw-r--r-- | drivers/net/ixgbe/ixgbe_82599.c | 403 | ||||
| -rw-r--r-- | drivers/net/ixgbe/ixgbe_common.c | 518 | ||||
| -rw-r--r-- | drivers/net/ixgbe/ixgbe_common.h | 17 | ||||
| -rw-r--r-- | drivers/net/ixgbe/ixgbe_type.h | 32 |
5 files changed, 557 insertions, 421 deletions
diff --git a/drivers/net/ixgbe/ixgbe_82598.c b/drivers/net/ixgbe/ixgbe_82598.c index 35a06b47587b..f2b7ff44215b 100644 --- a/drivers/net/ixgbe/ixgbe_82598.c +++ b/drivers/net/ixgbe/ixgbe_82598.c @@ -42,9 +42,9 @@ static s32 ixgbe_get_copper_link_capabilities_82598(struct ixgbe_hw *hw, ixgbe_link_speed *speed, bool *autoneg); static s32 ixgbe_setup_copper_link_82598(struct ixgbe_hw *hw, - ixgbe_link_speed speed, - bool autoneg, - bool autoneg_wait_to_complete); + ixgbe_link_speed speed, + bool autoneg, + bool autoneg_wait_to_complete); static s32 ixgbe_read_i2c_eeprom_82598(struct ixgbe_hw *hw, u8 byte_offset, u8 *eeprom_data); @@ -1221,7 +1221,7 @@ static struct ixgbe_mac_operations mac_ops_82598 = { static struct ixgbe_eeprom_operations eeprom_ops_82598 = { .init_params = &ixgbe_init_eeprom_params_generic, - .read = &ixgbe_read_eeprom_generic, + .read = &ixgbe_read_eerd_generic, .validate_checksum = &ixgbe_validate_eeprom_checksum_generic, .update_checksum = &ixgbe_update_eeprom_checksum_generic, }; diff --git a/drivers/net/ixgbe/ixgbe_82599.c b/drivers/net/ixgbe/ixgbe_82599.c index 38c384031c4c..dc197a4b0676 100644 --- a/drivers/net/ixgbe/ixgbe_82599.c +++ b/drivers/net/ixgbe/ixgbe_82599.c @@ -133,27 +133,6 @@ setup_sfp_out: return ret_val; } -/** - * ixgbe_get_pcie_msix_count_82599 - Gets MSI-X vector count - * @hw: pointer to hardware structure - * - * Read PCIe configuration space, and get the MSI-X vector count from - * the capabilities table. - **/ -static u32 ixgbe_get_pcie_msix_count_82599(struct ixgbe_hw *hw) -{ - struct ixgbe_adapter *adapter = hw->back; - u16 msix_count; - pci_read_config_word(adapter->pdev, IXGBE_PCIE_MSIX_82599_CAPS, - &msix_count); - msix_count &= IXGBE_PCIE_MSIX_TBL_SZ_MASK; - - /* MSI-X count is zero-based in HW, so increment to give proper value */ - msix_count++; - - return msix_count; -} - static s32 ixgbe_get_invariants_82599(struct ixgbe_hw *hw) { struct ixgbe_mac_info *mac = &hw->mac; @@ -165,7 +144,7 @@ static s32 ixgbe_get_invariants_82599(struct ixgbe_hw *hw) mac->num_rar_entries = IXGBE_82599_RAR_ENTRIES; mac->max_rx_queues = IXGBE_82599_MAX_RX_QUEUES; mac->max_tx_queues = IXGBE_82599_MAX_TX_QUEUES; - mac->max_msix_vectors = ixgbe_get_pcie_msix_count_82599(hw); + mac->max_msix_vectors = ixgbe_get_pcie_msix_count_generic(hw); return 0; } @@ -735,60 +714,6 @@ out: } /** - * ixgbe_check_mac_link_82599 - Determine link and speed status - * @hw: pointer to hardware structure - * @speed: pointer to link speed - * @link_up: true when link is up - * @link_up_wait_to_complete: bool used to wait for link up or not - * - * Reads the links register to determine if link is up and the current speed - **/ -static s32 ixgbe_check_mac_link_82599(struct ixgbe_hw *hw, - ixgbe_link_speed *speed, - bool *link_up, - bool link_up_wait_to_complete) -{ - u32 links_reg; - u32 i; - - links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS); - if (link_up_wait_to_complete) { - for (i = 0; i < IXGBE_LINK_UP_TIME; i++) { - if (links_reg & IXGBE_LINKS_UP) { - *link_up = true; - break; - } else { - *link_up = false; - } - msleep(100); - links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS); - } - } else { - if (links_reg & IXGBE_LINKS_UP) - *link_up = true; - else - *link_up = false; - } - - if ((links_reg & IXGBE_LINKS_SPEED_82599) == - IXGBE_LINKS_SPEED_10G_82599) - *speed = IXGBE_LINK_SPEED_10GB_FULL; - else if ((links_reg & IXGBE_LINKS_SPEED_82599) == - IXGBE_LINKS_SPEED_1G_82599) - *speed = IXGBE_LINK_SPEED_1GB_FULL; - else - *speed = IXGBE_LINK_SPEED_100_FULL; - - /* if link is down, zero out the current_mode */ - if (*link_up == false) { - hw->fc.current_mode = ixgbe_fc_none; - hw->fc.fc_was_autonegged = false; - } - - return 0; -} - -/** * ixgbe_setup_mac_link_82599 - Set MAC link speed * @hw: pointer to hardware structure * @speed: new link speed @@ -1050,243 +975,6 @@ reset_hw_out: } /** - * ixgbe_clear_vmdq_82599 - Disassociate a VMDq pool index from a rx address - * @hw: pointer to hardware struct - * @rar: receive address register index to disassociate - * @vmdq: VMDq pool index to remove from the rar - **/ -static s32 ixgbe_clear_vmdq_82599(struct ixgbe_hw *hw, u32 rar, u32 vmdq) -{ - u32 mpsar_lo, mpsar_hi; - u32 rar_entries = hw->mac.num_rar_entries; - - if (rar < rar_entries) { - mpsar_lo = IXGBE_READ_REG(hw, IXGBE_MPSAR_LO(rar)); - mpsar_hi = IXGBE_READ_REG(hw, IXGBE_MPSAR_HI(rar)); - - if (!mpsar_lo && !mpsar_hi) - goto done; - - if (vmdq == IXGBE_CLEAR_VMDQ_ALL) { - if (mpsar_lo) { - IXGBE_WRITE_REG(hw, IXGBE_MPSAR_LO(rar), 0); - mpsar_lo = 0; - } - if (mpsar_hi) { - IXGBE_WRITE_REG(hw, IXGBE_MPSAR_HI(rar), 0); - mpsar_hi = 0; - } - } else if (vmdq < 32) { - mpsar_lo &= ~(1 << vmdq); - IXGBE_WRITE_REG(hw, IXGBE_MPSAR_LO(rar), mpsar_lo); - } else { - mpsar_hi &= ~(1 << (vmdq - 32)); - IXGBE_WRITE_REG(hw, IXGBE_MPSAR_HI(rar), mpsar_hi); - } - - /* was that the last pool using this rar? */ - if (mpsar_lo == 0 && mpsar_hi == 0 && rar != 0) - hw->mac.ops.clear_rar(hw, rar); - } else { - hw_dbg(hw, "RAR index %d is out of range.\n", rar); - } - -done: - return 0; -} - -/** - * ixgbe_set_vmdq_82599 - Associate a VMDq pool index with a rx address - * @hw: pointer to hardware struct - * @rar: receive address register index to associate with a VMDq index - * @vmdq: VMDq pool index - **/ -static s32 ixgbe_set_vmdq_82599(struct ixgbe_hw *hw, u32 rar, u32 vmdq) -{ - u32 mpsar; - u32 rar_entries = hw->mac.num_rar_entries; - - if (rar < rar_entries) { - if (vmdq < 32) { - mpsar = IXGBE_READ_REG(hw, IXGBE_MPSAR_LO(rar)); - mpsar |= 1 << vmdq; - IXGBE_WRITE_REG(hw, IXGBE_MPSAR_LO(rar), mpsar); - } else { - mpsar = IXGBE_READ_REG(hw, IXGBE_MPSAR_HI(rar)); - mpsar |= 1 << (vmdq - 32); - IXGBE_WRITE_REG(hw, IXGBE_MPSAR_HI(rar), mpsar); - } - } else { - hw_dbg(hw, "RAR index %d is out of range.\n", rar); - } - return 0; -} - -/** - * ixgbe_set_vfta_82599 - Set VLAN filter table - * @hw: pointer to hardware structure - * @vlan: VLAN id to write to VLAN filter - * @vind: VMDq output index that maps queue to VLAN id in VFVFB - * @vlan_on: boolean flag to turn on/off VLAN in VFVF - * - * Turn on/off specified VLAN in the VLAN filter table. - **/ -static s32 ixgbe_set_vfta_82599(struct ixgbe_hw *hw, u32 vlan, u32 vind, - bool vlan_on) -{ - u32 regindex; - u32 vlvf_index; - u32 bitindex; - u32 bits; - u32 first_empty_slot; - u32 vt_ctl; - - if (vlan > 4095) - return IXGBE_ERR_PARAM; - - /* - * this is a 2 part operation - first the VFTA, then the - * VLVF and VLVFB if vind is set - */ - - /* Part 1 - * The VFTA is a bitstring made up of 128 32-bit registers - * that enable the particular VLAN id, much like the MTA: - * bits[11-5]: which register - * bits[4-0]: which bit in the register - */ - regindex = (vlan >> 5) & 0x7F; - bitindex = vlan & 0x1F; - bits = IXGBE_READ_REG(hw, IXGBE_VFTA(regindex)); - if (vlan_on) - bits |= (1 << bitindex); - else - bits &= ~(1 << bitindex); - IXGBE_WRITE_REG(hw, IXGBE_VFTA(regindex), bits); - - - /* Part 2 - * If VT mode is set - * Either vlan_on - * make sure the vlan is in VLVF - * set the vind bit in the matching VLVFB - * Or !vlan_on - * clear the pool bit and possibly the vind - */ - vt_ctl = IXGBE_READ_REG(hw, IXGBE_VT_CTL); - if (!(vt_ctl & IXGBE_VT_CTL_VT_ENABLE)) - goto out; - - /* find the vlanid or the first empty slot */ - first_empty_slot = 0; - - for (vlvf_index = 1; vlvf_index < IXGBE_VLVF_ENTRIES; vlvf_index++) { - bits = IXGBE_READ_REG(hw, IXGBE_VLVF(vlvf_index)); - if (!bits && !first_empty_slot) - first_empty_slot = vlvf_index; - else if ((bits & 0x0FFF) == vlan) - break; - } - - if (vlvf_index >= IXGBE_VLVF_ENTRIES) { - if (first_empty_slot) - vlvf_index = first_empty_slot; - else { - hw_dbg(hw, "No space in VLVF.\n"); - goto out; - } - } - - if (vlan_on) { - /* set the pool bit */ - if (vind < 32) { - bits = IXGBE_READ_REG(hw, - IXGBE_VLVFB(vlvf_index * 2)); - bits |= (1 << vind); - IXGBE_WRITE_REG(hw, - IXGBE_VLVFB(vlvf_index * 2), bits); - } else { - bits = IXGBE_READ_REG(hw, - IXGBE_VLVFB((vlvf_index * 2) + 1)); - bits |= (1 << (vind - 32)); - IXGBE_WRITE_REG(hw, - IXGBE_VLVFB((vlvf_index * 2) + 1), bits); - } - } else { - /* clear the pool bit */ - if (vind < 32) { - bits = IXGBE_READ_REG(hw, - IXGBE_VLVFB(vlvf_index * 2)); - bits &= ~(1 << vind); - IXGBE_WRITE_REG(hw, - IXGBE_VLVFB(vlvf_index * 2), bits); - bits |= IXGBE_READ_REG(hw, - IXGBE_VLVFB((vlvf_index * 2) + 1)); - } else { - bits = IXGBE_READ_REG(hw, - IXGBE_VLVFB((vlvf_index * 2) + 1)); - bits &= ~(1 << (vind - 32)); - IXGBE_WRITE_REG(hw, - IXGBE_VLVFB((vlvf_index * 2) + 1), bits); - bits |= IXGBE_READ_REG(hw, - IXGBE_VLVFB(vlvf_index * 2)); - } - } - - if (bits) { - IXGBE_WRITE_REG(hw, IXGBE_VLVF(vlvf_index), - (IXGBE_VLVF_VIEN | vlan)); - /* if bits is non-zero then some pools/VFs are still - * using this VLAN ID. Force the VFTA entry to on */ - bits = IXGBE_READ_REG(hw, IXGBE_VFTA(regindex)); - bits |= (1 << bitindex); - IXGBE_WRITE_REG(hw, IXGBE_VFTA(regindex), bits); - } - else - IXGBE_WRITE_REG(hw, IXGBE_VLVF(vlvf_index), 0); - -out: - return 0; -} - -/** - * ixgbe_clear_vfta_82599 - Clear VLAN filter table - * @hw: pointer to hardware structure - * - * Clears the VLAN filer table, and the VMDq index associated with the filter - **/ -static s32 ixgbe_clear_vfta_82599(struct ixgbe_hw *hw) -{ - u32 offset; - - for (offset = 0; offset < hw->mac.vft_size; offset++) - IXGBE_WRITE_REG(hw, IXGBE_VFTA(offset), 0); - - for (offset = 0; offset < IXGBE_VLVF_ENTRIES; offset++) { - IXGBE_WRITE_REG(hw, IXGBE_VLVF(offset), 0); - IXGBE_WRITE_REG(hw, IXGBE_VLVFB(offset * 2), 0); - IXGBE_WRITE_REG(hw, IXGBE_VLVFB((offset * 2) + 1), 0); - } - - return 0; -} - -/** - * ixgbe_init_uta_tables_82599 - Initialize the Unicast Table Array - * @hw: pointer to hardware structure - **/ -static s32 ixgbe_init_uta_tables_82599(struct ixgbe_hw *hw) -{ - int i; - hw_dbg(hw, " Clearing UTA\n"); - - for (i = 0; i < 128; i++) - IXGBE_WRITE_REG(hw, IXGBE_UTA(i), 0); - - return 0; -} - -/** * ixgbe_reinit_fdir_tables_82599 - Reinitialize Flow Director tables. * @hw: pointer to hardware structure **/ @@ -2550,75 +2238,6 @@ static s32 ixgbe_get_device_caps_82599(struct ixgbe_hw *hw, u16 *device_caps) } /** - * ixgbe_get_san_mac_addr_offset_82599 - SAN MAC address offset for 82599 - * @hw: pointer to hardware structure - * @san_mac_offset: SAN MAC address offset - * - * This function will read the EEPROM location for the SAN MAC address - * pointer, and returns the value at that location. This is used in both - * get and set mac_addr routines. - **/ -static s32 ixgbe_get_san_mac_addr_offset_82599(struct ixgbe_hw *hw, - u16 *san_mac_offset) -{ - /* - * First read the EEPROM pointer to see if the MAC addresses are - * available. - */ - hw->eeprom.ops.read(hw, IXGBE_SAN_MAC_ADDR_PTR, san_mac_offset); - - return 0; -} - -/** - * ixgbe_get_san_mac_addr_82599 - SAN MAC address retrieval for 82599 - * @hw: pointer to hardware structure - * @san_mac_addr: SAN MAC address - * - * Reads the SAN MAC address from the EEPROM, if it's available. This is - * per-port, so set_lan_id() must be called before reading the addresses. - * set_lan_id() is called by identify_sfp(), but this cannot be relied - * upon for non-SFP connections, so we must call it here. - **/ -static s32 ixgbe_get_san_mac_addr_82599(struct ixgbe_hw *hw, u8 *san_mac_addr) -{ - u16 san_mac_data, san_mac_offset; - u8 i; - - /* - * First read the EEPROM pointer to see if the MAC addresses are - * available. If they're not, no point in calling set_lan_id() here. - */ - ixgbe_get_san_mac_addr_offset_82599(hw, &san_mac_offset); - - if ((san_mac_offset == 0) || (san_mac_offset == 0xFFFF)) { - /* - * No addresses available in this EEPROM. It's not an - * error though, so just wipe the local address and return. - */ - for (i = 0; i < 6; i++) - san_mac_addr[i] = 0xFF; - - goto san_mac_addr_out; - } - - /* make sure we know which port we need to program */ - hw->mac.ops.set_lan_id(hw); - /* apply the port offset to the address offset */ - (hw->bus.func) ? (san_mac_offset += IXGBE_SAN_MAC_ADDR_PORT1_OFFSET) : - (san_mac_offset += IXGBE_SAN_MAC_ADDR_PORT0_OFFSET); - for (i = 0; i < 3; i++) { - hw->eeprom.ops.read(hw, san_mac_offset, &san_mac_data); - san_mac_addr[i * 2] = (u8)(san_mac_data); - san_mac_addr[i * 2 + 1] = (u8)(san_mac_data >> 8); - san_mac_offset++; - } - -san_mac_addr_out: - return 0; -} - -/** * ixgbe_verify_fw_version_82599 - verify fw version for 82599 * @hw: pointer to hardware structure * @@ -2720,7 +2339,7 @@ static struct ixgbe_mac_operations mac_ops_82599 = { .get_supported_physical_layer = &ixgbe_get_supported_physical_layer_82599, .enable_rx_dma = &ixgbe_enable_rx_dma_82599, .get_mac_addr = &ixgbe_get_mac_addr_generic, - .get_san_mac_addr = &ixgbe_get_san_mac_addr_82599, + .get_san_mac_addr = &ixgbe_get_san_mac_addr_generic, .get_device_caps = &ixgbe_get_device_caps_82599, .get_wwn_prefix = &ixgbe_get_wwn_prefix_82599, .stop_adapter = &ixgbe_stop_adapter_generic, @@ -2729,7 +2348,7 @@ static struct ixgbe_mac_operations mac_ops_82599 = { .read_analog_reg8 = &ixgbe_read_analog_reg8_82599, .write_analog_reg8 = &ixgbe_write_analog_reg8_82599, .setup_link = &ixgbe_setup_mac_link_82599, - .check_link = &ixgbe_check_mac_link_82599, + .check_link = &ixgbe_check_mac_link_generic, .get_link_capabilities = &ixgbe_get_link_capabilities_82599, .led_on = &ixgbe_led_on_generic, .led_off = &ixgbe_led_off_generic, @@ -2737,23 +2356,23 @@ static struct ixgbe_mac_operations mac_ops_82599 = { .blink_led_stop = &ixgbe_blink_led_stop_generic, .set_rar = &ixgbe_set_rar_generic, .clear_rar = &ixgbe_clear_rar_generic, - .set_vmdq = &ixgbe_set_vmdq_82599, - .clear_vmdq = &ixgbe_clear_vmdq_82599, + .set_vmdq = &ixgbe_set_vmdq_generic, + .clear_vmdq = &ixgbe_clear_vmdq_generic, .init_rx_addrs = &ixgbe_init_rx_addrs_generic, .update_uc_addr_list = &ixgbe_update_uc_addr_list_generic, .update_mc_addr_list = &ixgbe_update_mc_addr_list_generic, .enable_mc = &ixgbe_enable_mc_generic, .disable_mc = &ixgbe_disable_mc_generic, - .clear_vfta = &ixgbe_clear_vfta_82599, - .set_vfta = &ixgbe_set_vfta_82599, - .fc_enable = &ixgbe_fc_enable_generic, - .init_uta_tables = &ixgbe_init_uta_tables_82599, + .clear_vfta = &ixgbe_clear_vfta_generic, + .set_vfta = &ixgbe_set_vfta_generic, + .fc_enable = &ixgbe_fc_enable_generic, + .init_uta_tables = &ixgbe_init_uta_tables_generic, .setup_sfp = &ixgbe_setup_sfp_modules_82599, }; static struct ixgbe_eeprom_operations eeprom_ops_82599 = { .init_params = &ixgbe_init_eeprom_params_generic, - .read = &ixgbe_read_eeprom_generic, + .read = &ixgbe_read_eerd_generic, .write = &ixgbe_write_eeprom_generic, .validate_checksum = &ixgbe_validate_eeprom_checksum_generic, .update_checksum = &ixgbe_update_eeprom_checksum_generic, @@ -2762,7 +2381,7 @@ static struct ixgbe_eeprom_operations eeprom_ops_82599 = { static struct ixgbe_phy_operations phy_ops_82599 = { .identify = &ixgbe_identify_phy_82599, .identify_sfp = &ixgbe_identify_sfp_module_generic, - .init = &ixgbe_init_phy_ops_82599, + .init = &ixgbe_init_phy_ops_82599, .reset = &ixgbe_reset_phy_generic, .read_reg = &ixgbe_read_phy_reg_generic, .write_reg = &ixgbe_write_phy_reg_generic, diff --git a/drivers/net/ixgbe/ixgbe_common.c b/drivers/net/ixgbe/ixgbe_common.c index 753f2ab39d7f..1159d9138f05 100644 --- a/drivers/net/ixgbe/ixgbe_common.c +++ b/drivers/net/ixgbe/ixgbe_common.c @@ -34,7 +34,6 @@ #include "ixgbe_common.h" #include "ixgbe_phy.h" -static s32 ixgbe_poll_eeprom_eerd_done(struct ixgbe_hw *hw); static s32 ixgbe_acquire_eeprom(struct ixgbe_hw *hw); static s32 ixgbe_get_eeprom_semaphore(struct ixgbe_hw *hw); static void ixgbe_release_eeprom_semaphore(struct ixgbe_hw *hw); @@ -595,14 +594,14 @@ out: } /** - * ixgbe_read_eeprom_generic - Read EEPROM word using EERD + * ixgbe_read_eerd_generic - Read EEPROM word using EERD * @hw: pointer to hardware structure * @offset: offset of word in the EEPROM to read * @data: word read from the EEPROM * * Reads a 16 bit word from the EEPROM using the EERD register. **/ -s32 ixgbe_read_eeprom_generic(struct ixgbe_hw *hw, u16 offset, u16 *data) +s32 ixgbe_read_eerd_generic(struct ixgbe_hw *hw, u16 offset, u16 *data) { u32 eerd; s32 status; @@ -614,15 +613,15 @@ s32 ixgbe_read_eeprom_generic(struct ixgbe_hw *hw, u16 offset, u16 *data) goto out; } - eerd = (offset << IXGBE_EEPROM_READ_ADDR_SHIFT) + - IXGBE_EEPROM_READ_REG_START; + eerd = (offset << IXGBE_EEPROM_RW_ADDR_SHIFT) + + IXGBE_EEPROM_RW_REG_START; IXGBE_WRITE_REG(hw, IXGBE_EERD, eerd); - status = ixgbe_poll_eeprom_eerd_done(hw); + status = ixgbe_poll_eerd_eewr_done(hw, IXGBE_NVM_POLL_READ); if (status == 0) *data = (IXGBE_READ_REG(hw, IXGBE_EERD) >> - IXGBE_EEPROM_READ_REG_DATA); + IXGBE_EEPROM_RW_REG_DATA); else hw_dbg(hw, "Eeprom read timed out\n"); @@ -631,20 +630,26 @@ out: } /** - * ixgbe_poll_eeprom_eerd_done - Poll EERD status + * ixgbe_poll_eerd_eewr_done - Poll EERD read or EEWR write status * @hw: pointer to hardware structure + * @ee_reg: EEPROM flag for polling * - * Polls the status bit (bit 1) of the EERD to determine when the read is done. + * Polls the status bit (bit 1) of the EERD or EEWR to determine when the + * read or write is done respectively. **/ -static s32 ixgbe_poll_eeprom_eerd_done(struct ixgbe_hw *hw) +s32 ixgbe_poll_eerd_eewr_done(struct ixgbe_hw *hw, u32 ee_reg) { u32 i; u32 reg; s32 status = IXGBE_ERR_EEPROM; - for (i = 0; i < IXGBE_EERD_ATTEMPTS; i++) { - reg = IXGBE_READ_REG(hw, IXGBE_EERD); - if (reg & IXGBE_EEPROM_READ_REG_DONE) { + for (i = 0; i < IXGBE_EERD_EEWR_ATTEMPTS; i++) { + if (ee_reg == IXGBE_NVM_POLL_READ) + reg = IXGBE_READ_REG(hw, IXGBE_EERD); + else + reg = IXGBE_READ_REG(hw, IXGBE_EEWR); + + if (reg & IXGBE_EEPROM_RW_REG_DONE) { status = 0; break; } @@ -2255,3 +2260,490 @@ s32 ixgbe_blink_led_stop_generic(struct ixgbe_hw *hw, u32 index) return 0; } + +/** + * ixgbe_get_san_mac_addr_offset - Get SAN MAC address offset from the EEPROM + * @hw: pointer to hardware structure + * @san_mac_offset: SAN MAC address offset + * + * This function will read the EEPROM location for the SAN MAC address + * pointer, and returns the value at that location. This is used in both + * get and set mac_addr routines. + **/ +static s32 ixgbe_get_san_mac_addr_offset(struct ixgbe_hw *hw, + u16 *san_mac_offset) +{ + /* + * First read the EEPROM pointer to see if the MAC addresses are + * available. + */ + hw->eeprom.ops.read(hw, IXGBE_SAN_MAC_ADDR_PTR, san_mac_offset); + + return 0; +} + +/** + * ixgbe_get_san_mac_addr_generic - SAN MAC address retrieval from the EEPROM + * @hw: pointer to hardware structure + * @san_mac_addr: SAN MAC address + * + * Reads the SAN MAC address from the EEPROM, if it's available. This is + * per-port, so set_lan_id() must be called before reading the addresses. + * set_lan_id() is called by identify_sfp(), but this cannot be relied + * upon for non-SFP connections, so we must call it here. + **/ +s32 ixgbe_get_san_mac_addr_generic(struct ixgbe_hw *hw, u8 *san_mac_addr) +{ + u16 san_mac_data, san_mac_offset; + u8 i; + + /* + * First read the EEPROM pointer to see if the MAC addresses are + * available. If they're not, no point in calling set_lan_id() here. + */ + ixgbe_get_san_mac_addr_offset(hw, &san_mac_offset); + + if ((san_mac_offset == 0) || (san_mac_offset == 0xFFFF)) { + /* + * No addresses available in this EEPROM. It's not an + * error though, so just wipe the local address and return. + */ + for (i = 0; i < 6; i++) + san_mac_addr[i] = 0xFF; + + goto san_mac_addr_out; + } + + /* make sure we know which port we need to program */ + hw->mac.ops.set_lan_id(hw); + /* apply the port offset to the address offset */ + (hw->bus.func) ? (san_mac_offset += IXGBE_SAN_MAC_ADDR_PORT1_OFFSET) : + (san_mac_offset += IXGBE_SAN_MAC_ADDR_PORT0_OFFSET); + for (i = 0; i < 3; i++) { + hw->eeprom.ops.read(hw, san_mac_offset, &san_mac_data); + san_mac_addr[i * 2] = (u8)(san_mac_data); + san_mac_addr[i * 2 + 1] = (u8)(san_mac_data >> 8); + san_mac_offset++; + } + +san_mac_addr_out: + return 0; +} + +/** + * ixgbe_get_pcie_msix_count_generic - Gets MSI-X vector count + * @hw: pointer to hardware structure + * + * Read PCIe configuration space, and get the MSI-X vector count from + * the capabilities table. + **/ +u32 ixgbe_get_pcie_msix_count_generic(struct ixgbe_hw *hw) +{ + struct ixgbe_adapter *adapter = hw->back; + u16 msix_count; + pci_read_config_word(adapter->pdev, IXGBE_PCIE_MSIX_82599_CAPS, + &msix_count); + msix_count &= IXGBE_PCIE_MSIX_TBL_SZ_MASK; + + /* MSI-X count is zero-based in HW, so increment to give proper value */ + msix_count++; + + return msix_count; +} + +/** + * ixgbe_clear_vmdq_generic - Disassociate a VMDq pool index from a rx address + * @hw: pointer to hardware struct + * @rar: receive address register index to disassociate + * @vmdq: VMDq pool index to remove from the rar + **/ +s32 ixgbe_clear_vmdq_generic(struct ixgbe_hw *hw, u32 rar, u32 vmdq) +{ + u32 mpsar_lo, mpsar_hi; + u32 rar_entries = hw->mac.num_rar_entries; + + if (rar < rar_entries) { + mpsar_lo = IXGBE_READ_REG(hw, IXGBE_MPSAR_LO(rar)); + mpsar_hi = IXGBE_READ_REG(hw, IXGBE_MPSAR_HI(rar)); + + if (!mpsar_lo && !mpsar_hi) + goto done; + + if (vmdq == IXGBE_CLEAR_VMDQ_ALL) { + if (mpsar_lo) { + IXGBE_WRITE_REG(hw, IXGBE_MPSAR_LO(rar), 0); + mpsar_lo = 0; + } + if (mpsar_hi) { + IXGBE_WRITE_REG(hw, IXGBE_MPSAR_HI(rar), 0); + mpsar_hi = 0; + } + } else if (vmdq < 32) { + mpsar_lo &= ~(1 << vmdq); + IXGBE_WRITE_REG(hw, IXGBE_MPSAR_LO(rar), mpsar_lo); + } else { + mpsar_hi &= ~(1 << (vmdq - 32)); + IXGBE_WRITE_REG(hw, IXGBE_MPSAR_HI(rar), mpsar_hi); + } + + /* was that the last pool using this rar? */ + if (mpsar_lo == 0 && mpsar_hi == 0 && rar != 0) + hw->mac.ops.clear_rar(hw, rar); + } else { + hw_dbg(hw, "RAR index %d is out of range.\n", rar); + } + +done: + return 0; +} + +/** + * ixgbe_set_vmdq_generic - Associate a VMDq pool index with a rx address + * @hw: pointer to hardware struct + * @rar: receive address register index to associate with a VMDq index + * @vmdq: VMDq pool index + **/ +s32 ixgbe_set_vmdq_generic(struct ixgbe_hw *hw, u32 rar, u32 vmdq) +{ + u32 mpsar; + u32 rar_entries = hw->mac.num_rar_entries; + + if (rar < rar_entries) { + if (vmdq < 32) { + mpsar = IXGBE_READ_REG(hw, IXGBE_MPSAR_LO(rar)); + mpsar |= 1 << vmdq; + IXGBE_WRITE_REG(hw, IXGBE_MPSAR_LO(rar), mpsar); + } else { + mpsar = IXGBE_READ_REG(hw, IXGBE_MPSAR_HI(rar)); + mpsar |= 1 << (vmdq - 32); + IXGBE_WRITE_REG(hw, IXGBE_MPSAR_HI(rar), mpsar); + } + } else { + hw_dbg(hw, "RAR index %d is out of range.\n", rar); + } + return 0; +} + +/** + * ixgbe_init_uta_tables_generic - Initialize the Unicast Table Array + * @hw: pointer to hardware structure + **/ +s32 ixgbe_init_uta_tables_generic(struct ixgbe_hw *hw) +{ + int i; + + + for (i = 0; i < 128; i++) + IXGBE_WRITE_REG(hw, IXGBE_UTA(i), 0); + + return 0; +} + +/** + * ixgbe_find_vlvf_slot - find the vlanid or the first empty slot + * @hw: pointer to hardware structure + * @vlan: VLAN id to write to VLAN filter + * + * return the VLVF index where this VLAN id should be placed + * + **/ +s32 ixgbe_find_vlvf_slot(struct ixgbe_hw *hw, u32 vlan) +{ + u32 bits = 0; + u32 first_empty_slot = 0; + s32 regindex; + + /* short cut the special case */ + if (vlan == 0) + return 0; + + /* + * Search for the vlan id in the VLVF entries. Save off the first empty + * slot found along the way + */ + for (regindex = 1; regindex < IXGBE_VLVF_ENTRIES; regindex++) { + bits = IXGBE_READ_REG(hw, IXGBE_VLVF(regindex)); + if (!bits && !(first_empty_slot)) + first_empty_slot = regindex; + else if ((bits & 0x0FFF) == vlan) + break; + } + + /* + * If regindex is less than IXGBE_VLVF_ENTRIES, then we found the vlan + * in the VLVF. Else use the first empty VLVF register for this + * vlan id. + */ + if (regindex >= IXGBE_VLVF_ENTRIES) { + if (first_empty_slot) + regindex = first_empty_slot; + else { + hw_dbg(hw, "No space in VLVF.\n"); + regindex = IXGBE_ERR_NO_SPACE; + } + } + + return regindex; +} + +/** + * ixgbe_set_vfta_generic - Set VLAN filter table + * @hw: pointer to hardware structure + * @vlan: VLAN id to write to VLAN filter + * @vind: VMDq output index that maps queue to VLAN id in VFVFB + * @vlan_on: boolean flag to turn on/off VLAN in VFVF + * + * Turn on/off specified VLAN in the VLAN filter table. + **/ +s32 ixgbe_set_vfta_generic(struct ixgbe_hw *hw, u32 vlan, u32 vind, + bool vlan_on) +{ + s32 regindex; + u32 bitindex; + u32 vfta; + u32 bits; + u32 vt; + u32 targetbit; + bool vfta_changed = false; + + if (vlan > 4095) + return IXGBE_ERR_PARAM; + + /* + * this is a 2 part operation - first the VFTA, then the + * VLVF and VLVFB if VT Mode is set + * We don't write the VFTA until we know the VLVF part succeeded. + */ + + /* Part 1 + * The VFTA is a bitstring made up of 128 32-bit registers + * that enable the particular VLAN id, much like the MTA: + * bits[11-5]: which register + * bits[4-0]: which bit in the register + */ + regindex = (vlan >> 5) & 0x7F; + bitindex = vlan & 0x1F; + targetbit = (1 << bitindex); + vfta = IXGBE_READ_REG(hw, IXGBE_VFTA(regindex)); + + if (vlan_on) { + if (!(vfta & targetbit)) { + vfta |= targetbit; + vfta_changed = true; + } + } else { + if ((vfta & targetbit)) { + vfta &= ~targetbit; + vfta_changed = true; + } + } + + /* Part 2 + * If VT Mode is set + * Either vlan_on + * make sure the vlan is in VLVF + * set the vind bit in the matching VLVFB + * Or !vlan_on + * clear the pool bit and possibly the vind + */ + vt = IXGBE_READ_REG(hw, IXGBE_VT_CTL); + if (vt & IXGBE_VT_CTL_VT_ENABLE) { + s32 vlvf_index; + + vlvf_index = ixgbe_find_vlvf_slot(hw, vlan); + if (vlvf_index < 0) + return vlvf_index; + + if (vlan_on) { + /* set the pool bit */ + if (vind < 32) { + bits = IXGBE_READ_REG(hw, + IXGBE_VLVFB(vlvf_index*2)); + bits |= (1 << vind); + IXGBE_WRITE_REG(hw, + IXGBE_VLVFB(vlvf_index*2), + bits); + } else { + bits = IXGBE_READ_REG(hw, + IXGBE_VLVFB((vlvf_index*2)+1)); + bits |= (1 << (vind-32)); + IXGBE_WRITE_REG(hw, + IXGBE_VLVFB((vlvf_index*2)+1), + bits); + } + } else { + /* clear the pool bit */ + if (vind < 32) { + bits = IXGBE_READ_REG(hw, + IXGBE_VLVFB(vlvf_index*2)); + bits &= ~(1 << vind); + IXGBE_WRITE_REG(hw, + IXGBE_VLVFB(vlvf_index*2), + bits); + bits |= IXGBE_READ_REG(hw, + IXGBE_VLVFB((vlvf_index*2)+1)); + } else { + bits = IXGBE_READ_REG(hw, + IXGBE_VLVFB((vlvf_index*2)+1)); + bits &= ~(1 << (vind-32)); + IXGBE_WRITE_REG(hw, + IXGBE_VLVFB((vlvf_index*2)+1), + bits); + bits |= IXGBE_READ_REG(hw, + IXGBE_VLVFB(vlvf_index*2)); + } + } + + /* + * If there are still bits set in the VLVFB registers + * for the VLAN ID indicated we need to see if the + * caller is requesting that we clear the VFTA entry bit. + * If the caller has requested that we clear the VFTA + * entry bit but there are still pools/VFs using this VLAN + * ID entry then ignore the request. We're not worried + * about the case where we're turning the VFTA VLAN ID + * entry bit on, only when requested to turn it off as + * there may be multiple pools and/or VFs using the + * VLAN ID entry. In that case we cannot clear the + * VFTA bit until all pools/VFs using that VLAN ID have also + * been cleared. This will be indicated by "bits" being + * zero. + */ + if (bits) { + IXGBE_WRITE_REG(hw, IXGBE_VLVF(vlvf_index), + (IXGBE_VLVF_VIEN | vlan)); + if (!vlan_on) { + /* someone wants to clear the vfta entry + * but some pools/VFs are still using it. + * Ignore it. */ + vfta_changed = false; + } + } + else + IXGBE_WRITE_REG(hw, IXGBE_VLVF(vlvf_index), 0); + } + + if (vfta_changed) + IXGBE_WRITE_REG(hw, IXGBE_VFTA(regindex), vfta); + + return 0; +} + +/** + * ixgbe_clear_vfta_generic - Clear VLAN filter table + * @hw: pointer to hardware structure + * + * Clears the VLAN filer table, and the VMDq index associated with the filter + **/ +s32 ixgbe_clear_vfta_generic(struct ixgbe_hw *hw) +{ + u32 offset; + + for (offset = 0; offset < hw->mac.vft_size; offset++) + IXGBE_WRITE_REG(hw, IXGBE_VFTA(offset), 0); + + for (offset = 0; offset < IXGBE_VLVF_ENTRIES; offset++) { + IXGBE_WRITE_REG(hw, IXGBE_VLVF(offset), 0); + IXGBE_WRITE_REG(hw, IXGBE_VLVFB(offset*2), 0); + IXGBE_WRITE_REG(hw, IXGBE_VLVFB((offset*2)+1), 0); + } + + return 0; +} + +/** + * ixgbe_check_mac_link_generic - Determine link and speed status + * @hw: pointer to hardware structure + * @speed: pointer to link speed + * @link_up: true when link is up + * @link_up_wait_to_complete: bool used to wait for link up or not + * + * Reads the links register to determine if link is up and the current speed + **/ +s32 ixgbe_check_mac_link_generic(struct ixgbe_hw *hw, ixgbe_link_speed *speed, + bool *link_up, bool link_up_wait_to_complete) +{ + u32 links_reg; + u32 i; + + links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS); + if (link_up_wait_to_complete) { + for (i = 0; i < IXGBE_LINK_UP_TIME; i++) { + if (links_reg & IXGBE_LINKS_UP) { + *link_up = true; + break; + } else { + *link_up = false; + } + msleep(100); + links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS); + } + } else { + if (links_reg & IXGBE_LINKS_UP) + *link_up = true; + else + *link_up = false; + } + + if ((links_reg & IXGBE_LINKS_SPEED_82599) == + IXGBE_LINKS_SPEED_10G_82599) + *speed = IXGBE_LINK_SPEED_10GB_FULL; + else if ((links_reg & IXGBE_LINKS_SPEED_82599) == + IXGBE_LINKS_SPEED_1G_82599) + *speed = IXGBE_LINK_SPEED_1GB_FULL; + else + *speed = IXGBE_LINK_SPEED_100_FULL; + + /* if link is down, zero out the current_mode */ + if (*link_up == false) { + hw->fc.current_mode = ixgbe_fc_none; + hw->fc.fc_was_autonegged = false; + } + + return 0; +} + +/** + * ixgbe_get_wwn_prefix_generic - Get alternative WWNN/WWPN prefix from + * the EEPROM + * @hw: pointer to hardware structure + * @wwnn_prefix: the alternative WWNN prefix + * @wwpn_prefix: the alternative WWPN prefix + * + * This function will read the EEPROM from the alternative SAN MAC address + * block to check the support for the alternative WWNN/WWPN prefix support. + **/ +s32 ixgbe_get_wwn_prefix_generic(struct ixgbe_hw *hw, u16 *wwnn_prefix, + u16 *wwpn_prefix) +{ + u16 offset, caps; + u16 alt_san_mac_blk_offset; + + /* clear output first */ + *wwnn_prefix = 0xFFFF; + *wwpn_prefix = 0xFFFF; + + /* check if alternative SAN MAC is supported */ + hw->eeprom.ops.read(hw, IXGBE_ALT_SAN_MAC_ADDR_BLK_PTR, + &alt_san_mac_blk_offset); + + if ((alt_san_mac_blk_offset == 0) || + (alt_san_mac_blk_offset == 0xFFFF)) + goto wwn_prefix_out; + + /* check capability in alternative san mac address block */ + offset = alt_san_mac_blk_offset + IXGBE_ALT_SAN_MAC_ADDR_CAPS_OFFSET; + hw->eeprom.ops.read(hw, offset, &caps); + if (!(caps & IXGBE_ALT_SAN_MAC_ADDR_CAPS_ALTWWN)) + goto wwn_prefix_out; + + /* get the corresponding prefix for WWNN/WWPN */ + offset = alt_san_mac_blk_offset + IXGBE_ALT_SAN_MAC_ADDR_WWNN_OFFSET; + hw->eeprom.ops.read(hw, offset, wwnn_prefix); + + offset = alt_san_mac_blk_offset + IXGBE_ALT_SAN_MAC_ADDR_WWPN_OFFSET; + hw->eeprom.ops.read(hw, offset, wwpn_prefix); + +wwn_prefix_out: + return 0; +} diff --git a/drivers/net/ixgbe/ixgbe_common.h b/drivers/net/ixgbe/ixgbe_common.h index 264eef575cd6..3080afb12bdf 100644 --- a/drivers/net/ixgbe/ixgbe_common.h +++ b/drivers/net/ixgbe/ixgbe_common.h @@ -30,6 +30,7 @@ #include "ixgbe_type.h" +u32 ixgbe_get_pcie_msix_count_generic(struct ixgbe_hw *hw); s32 ixgbe_init_ops_generic(struct ixgbe_hw *hw); s32 ixgbe_init_hw_generic(struct ixgbe_hw *hw); s32 ixgbe_start_hw_generic(struct ixgbe_hw *hw); @@ -45,12 +46,13 @@ s32 ixgbe_led_off_generic(struct ixgbe_hw *hw, u32 index); s32 ixgbe_init_eeprom_params_generic(struct ixgbe_hw *hw); s32 ixgbe_write_eeprom_generic(struct ixgbe_hw *hw, u16 offset, u16 data); -s32 ixgbe_read_eeprom_generic(struct ixgbe_hw *hw, u16 offset, u16 *data); +s32 ixgbe_read_eerd_generic(struct ixgbe_hw *hw, u16 offset, u16 *data); s32 ixgbe_read_eeprom_bit_bang_generic(struct ixgbe_hw *hw, u16 offset, u16 *data); s32 ixgbe_validate_eeprom_checksum_generic(struct ixgbe_hw *hw, u16 *checksum_val); s32 ixgbe_update_eeprom_checksum_generic(struct ixgbe_hw *hw); +s32 ixgbe_poll_eerd_eewr_done(struct ixgbe_hw *hw, u32 ee_reg); s32 ixgbe_set_rar_generic(struct ixgbe_hw *hw, u32 index, u8 *addr, u32 vmdq, u32 enable_addr); @@ -70,9 +72,16 @@ s32 ixgbe_validate_mac_addr(u8 *mac_addr); s32 ixgbe_acquire_swfw_sync(struct ixgbe_hw *hw, u16 mask); void ixgbe_release_swfw_sync(struct ixgbe_hw *hw, u16 mask); s32 ixgbe_disable_pcie_master(struct ixgbe_hw *hw); - -s32 ixgbe_read_analog_reg8_generic(struct ixgbe_hw *hw, u32 reg, u8 *val); -s32 ixgbe_write_analog_reg8_generic(struct ixgbe_hw *hw, u32 reg, u8 val); +s32 ixgbe_get_san_mac_addr_generic(struct ixgbe_hw *hw, u8 *san_mac_addr); +s32 ixgbe_set_vmdq_generic(struct ixgbe_hw *hw, u32 rar, u32 vmdq); +s32 ixgbe_clear_vmdq_generic(struct ixgbe_hw *hw, u32 rar, u32 vmdq); +s32 ixgbe_init_uta_tables_generic(struct ixgbe_hw *hw); +s32 ixgbe_set_vfta_generic(struct ixgbe_hw *hw, u32 vlan, + u32 vind, bool vlan_on); +s32 ixgbe_clear_vfta_generic(struct ixgbe_hw *hw); +s32 ixgbe_check_mac_link_generic(struct ixgbe_hw *hw, + ixgbe_link_speed *speed, + bool *link_up, bool link_up_wait_to_complete); s32 ixgbe_blink_led_start_generic(struct ixgbe_hw *hw, u32 index); s32 ixgbe_blink_led_stop_generic(struct ixgbe_hw *hw, u32 index); diff --git a/drivers/net/ixgbe/ixgbe_type.h b/drivers/net/ixgbe/ixgbe_type.h index 8fc59ac3c0e8..bd69196ff522 100644 --- a/drivers/net/ixgbe/ixgbe_type.h +++ b/drivers/net/ixgbe/ixgbe_type.h @@ -73,6 +73,7 @@ /* NVM Registers */ #define IXGBE_EEC 0x10010 #define IXGBE_EERD 0x10014 +#define IXGBE_EEWR 0x10018 #define IXGBE_FLA 0x1001C #define IXGBE_EEMNGCTL 0x10110 #define IXGBE_EEMNGDATA 0x10114 @@ -699,6 +700,7 @@ #define IXGBE_MREVID 0x11064 #define IXGBE_DCA_ID 0x11070 #define IXGBE_DCA_CTRL 0x11074 +#define IXGBE_SWFW_SYNC IXGBE_GSSR /* PCIe registers 82599-specific */ #define IXGBE_GCR_EXT 0x11050 @@ -1463,8 +1465,9 @@ #define IXGBE_SWSM_SMBI 0x00000001 /* Driver Semaphore bit */ #define IXGBE_SWSM_SWESMBI 0x00000002 /* FW Semaphore bit */ #define IXGBE_SWSM_WMNG 0x00000004 /* Wake MNG Clock */ +#define IXGBE_SWFW_REGSMP 0x80000000 /* Register Semaphore bit 31 */ -/* GSSR definitions */ +/* SW_FW_SYNC/GSSR definitions */ #define IXGBE_GSSR_EEP_SM 0x0001 #define IXGBE_GSSR_PHY0_SM 0x0002 #define IXGBE_GSSR_PHY1_SM 0x0004 @@ -1484,6 +1487,8 @@ #define IXGBE_EEC_GNT 0x00000080 /* EEPROM Access Grant */ #define IXGBE_EEC_PRES 0x00000100 /* EEPROM Present */ #define IXGBE_EEC_ARD 0x00000200 /* EEPROM Auto Read Done */ +#define IXGBE_EEC_FLUP 0x00800000 /* Flash update command */ +#define IXGBE_EEC_FLUDONE 0x04000000 /* Flash update done */ /* EEPROM Addressing bits based on type (0-small, 1-large) */ #define IXGBE_EEC_ADDR_SIZE 0x00000400 #define IXGBE_EEC_SIZE 0x00007800 /* EEPROM Size */ @@ -1539,10 +1544,12 @@ #define IXGBE_EEPROM_ERASE256_OPCODE_SPI 0xDB /* EEPROM ERASE 256B */ /* EEPROM Read Register */ -#define IXGBE_EEPROM_READ_REG_DATA 16 /* data offset in EEPROM read reg */ -#define IXGBE_EEPROM_READ_REG_DONE 2 /* Offset to READ done bit */ -#define IXGBE_EEPROM_READ_REG_START 1 /* First bit to start operation */ -#define IXGBE_EEPROM_READ_ADDR_SHIFT 2 /* Shift to the address bits */ +#define IXGBE_EEPROM_RW_REG_DATA 16 /* data offset in EEPROM read reg */ +#define IXGBE_EEPROM_RW_REG_DONE 2 /* Offset to READ done bit */ +#define IXGBE_EEPROM_RW_REG_START 1 /* First bit to start operation */ +#define IXGBE_EEPROM_RW_ADDR_SHIFT 2 /* Shift to the address bits */ +#define IXGBE_NVM_POLL_WRITE 1 /* Flag for polling for write complete */ +#define IXGBE_NVM_POLL_READ 0 /* Flag for polling for read complete */ #define IXGBE_ETH_LENGTH_OF_ADDRESS 6 @@ -1550,9 +1557,15 @@ #define IXGBE_EEPROM_GRANT_ATTEMPTS 1000 /* EEPROM # attempts to gain grant */ #endif -#ifndef IXGBE_EERD_ATTEMPTS -/* Number of 5 microseconds we wait for EERD read to complete */ -#define IXGBE_EERD_ATTEMPTS 100000 +#ifndef IXGBE_EERD_EEWR_ATTEMPTS +/* Number of 5 microseconds we wait for EERD read and + * EERW write to complete */ +#define IXGBE_EERD_EEWR_ATTEMPTS 100000 +#endif + +#ifndef IXGBE_FLUDONE_ATTEMPTS +/* # attempts we wait for flush update to complete */ +#define IXGBE_FLUDONE_ATTEMPTS 20000 #endif #define IXGBE_SAN_MAC_ADDR_PORT0_OFFSET 0x0 @@ -2476,6 +2489,7 @@ struct ixgbe_mac_info { u32 mcft_size; u32 vft_size; u32 num_rar_entries; + u32 rar_highwater; u32 max_tx_queues; u32 max_rx_queues; u32 max_msix_vectors; @@ -2582,8 +2596,10 @@ struct ixgbe_info { #define IXGBE_ERR_SFP_NOT_SUPPORTED -19 #define IXGBE_ERR_SFP_NOT_PRESENT -20 #define IXGBE_ERR_SFP_NO_INIT_SEQ_PRESENT -21 +#define IXGBE_ERR_NO_SAN_ADDR_PTR -22 #define IXGBE_ERR_FDIR_REINIT_FAILED -23 #define IXGBE_ERR_EEPROM_VERSION -24 +#define IXGBE_ERR_NO_SPACE -25 #define IXGBE_NOT_IMPLEMENTED 0x7FFFFFFF #endif /* _IXGBE_TYPE_H_ */ |