diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/net/tg3.c | 52 | ||||
| -rw-r--r-- | drivers/net/tg3.h | 1 |
2 files changed, 44 insertions, 9 deletions
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index b8f1524da557..caf4102b54ce 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -9552,12 +9552,36 @@ static int __devinit tg3_get_invariants(struct tg3 *tp) } } - /* Find msi capability. */ + /* The EPB bridge inside 5714, 5715, and 5780 cannot support + * DMA addresses > 40-bit. This bridge may have other additional + * 57xx devices behind it in some 4-port NIC designs for example. + * Any tg3 device found behind the bridge will also need the 40-bit + * DMA workaround. + */ if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5780 || GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5714) { tp->tg3_flags2 |= TG3_FLG2_5780_CLASS; + tp->tg3_flags |= TG3_FLAG_40BIT_DMA_BUG; tp->msi_cap = pci_find_capability(tp->pdev, PCI_CAP_ID_MSI); } + else { + struct pci_dev *bridge = NULL; + + do { + bridge = pci_get_device(PCI_VENDOR_ID_SERVERWORKS, + PCI_DEVICE_ID_SERVERWORKS_EPB, + bridge); + if (bridge && bridge->subordinate && + (bridge->subordinate->number <= + tp->pdev->bus->number) && + (bridge->subordinate->subordinate >= + tp->pdev->bus->number)) { + tp->tg3_flags |= TG3_FLAG_40BIT_DMA_BUG; + pci_dev_put(bridge); + break; + } + } while (bridge); + } /* Initialize misc host control in PCI block. */ tp->misc_host_ctrl |= (misc_ctrl_reg & @@ -10303,7 +10327,14 @@ static int __devinit tg3_test_dma(struct tg3 *tp) GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704) { u32 ccval = (tr32(TG3PCI_CLOCK_CTRL) & 0x1f); - if (ccval == 0x6 || ccval == 0x7) + /* If the 5704 is behind the EPB bridge, we can + * do the less restrictive ONE_DMA workaround for + * better performance. + */ + if ((tp->tg3_flags & TG3_FLAG_40BIT_DMA_BUG) && + GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704) + tp->dma_rwctrl |= 0x8000; + else if (ccval == 0x6 || ccval == 0x7) tp->dma_rwctrl |= DMA_RWCTRL_ONE_DMA; /* Set bit 23 to enable PCIX hw bug fix */ @@ -10759,19 +10790,20 @@ static int __devinit tg3_init_one(struct pci_dev *pdev, goto err_out_iounmap; } - /* 5714, 5715 and 5780 cannot support DMA addresses > 40-bit. + /* The EPB bridge inside 5714, 5715, and 5780 and any + * device behind the EPB cannot support DMA addresses > 40-bit. * On 64-bit systems with IOMMU, use 40-bit dma_mask. * On 64-bit systems without IOMMU, use 64-bit dma_mask and * do DMA address check in tg3_start_xmit(). */ - if (tp->tg3_flags2 & TG3_FLG2_5780_CLASS) { + if (tp->tg3_flags2 & TG3_FLG2_IS_5788) + persist_dma_mask = dma_mask = DMA_32BIT_MASK; + else if (tp->tg3_flags & TG3_FLAG_40BIT_DMA_BUG) { persist_dma_mask = dma_mask = DMA_40BIT_MASK; #ifdef CONFIG_HIGHMEM dma_mask = DMA_64BIT_MASK; #endif - } else if (tp->tg3_flags2 & TG3_FLG2_IS_5788) - persist_dma_mask = dma_mask = DMA_32BIT_MASK; - else + } else persist_dma_mask = dma_mask = DMA_64BIT_MASK; /* Configure DMA attributes. */ @@ -10908,8 +10940,10 @@ static int __devinit tg3_init_one(struct pci_dev *pdev, (tp->tg3_flags & TG3_FLAG_SPLIT_MODE) != 0, (tp->tg3_flags2 & TG3_FLG2_NO_ETH_WIRE_SPEED) == 0, (tp->tg3_flags2 & TG3_FLG2_TSO_CAPABLE) != 0); - printk(KERN_INFO "%s: dma_rwctrl[%08x]\n", - dev->name, tp->dma_rwctrl); + printk(KERN_INFO "%s: dma_rwctrl[%08x] dma_mask[%d-bit]\n", + dev->name, tp->dma_rwctrl, + (pdev->dma_mask == DMA_32BIT_MASK) ? 32 : + (((u64) pdev->dma_mask == DMA_40BIT_MASK) ? 40 : 64)); return 0; diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h index 7f4b7f6ac40d..7e3b613afb29 100644 --- a/drivers/net/tg3.h +++ b/drivers/net/tg3.h @@ -2163,6 +2163,7 @@ struct tg3 { #define TG3_FLAG_10_100_ONLY 0x01000000 #define TG3_FLAG_PAUSE_AUTONEG 0x02000000 #define TG3_FLAG_IN_RESET_TASK 0x04000000 +#define TG3_FLAG_40BIT_DMA_BUG 0x08000000 #define TG3_FLAG_BROKEN_CHECKSUMS 0x10000000 #define TG3_FLAG_GOT_SERDES_FLOWCTL 0x20000000 #define TG3_FLAG_SPLIT_MODE 0x40000000 |