diff options
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/input/misc/ati_remote2.c | 36 | ||||
-rw-r--r-- | drivers/input/misc/ims-pcu.c | 4 | ||||
-rw-r--r-- | drivers/input/mouse/byd.c | 565 | ||||
-rw-r--r-- | drivers/input/mouse/psmouse-base.c | 2 | ||||
-rw-r--r-- | drivers/input/mouse/synaptics.c | 5 | ||||
-rw-r--r-- | drivers/input/rmi4/rmi_driver.c | 5 | ||||
-rw-r--r-- | drivers/input/touchscreen/melfas_mip4.c | 28 | ||||
-rw-r--r-- | drivers/input/touchscreen/sur40.c | 21 |
8 files changed, 449 insertions, 217 deletions
diff --git a/drivers/input/misc/ati_remote2.c b/drivers/input/misc/ati_remote2.c index cfd58e87da26..1c5914cae853 100644 --- a/drivers/input/misc/ati_remote2.c +++ b/drivers/input/misc/ati_remote2.c @@ -817,26 +817,49 @@ static int ati_remote2_probe(struct usb_interface *interface, const struct usb_d ar2->udev = udev; + /* Sanity check, first interface must have an endpoint */ + if (alt->desc.bNumEndpoints < 1 || !alt->endpoint) { + dev_err(&interface->dev, + "%s(): interface 0 must have an endpoint\n", __func__); + r = -ENODEV; + goto fail1; + } ar2->intf[0] = interface; ar2->ep[0] = &alt->endpoint[0].desc; + /* Sanity check, the device must have two interfaces */ ar2->intf[1] = usb_ifnum_to_if(udev, 1); + if ((udev->actconfig->desc.bNumInterfaces < 2) || !ar2->intf[1]) { + dev_err(&interface->dev, "%s(): need 2 interfaces, found %d\n", + __func__, udev->actconfig->desc.bNumInterfaces); + r = -ENODEV; + goto fail1; + } + r = usb_driver_claim_interface(&ati_remote2_driver, ar2->intf[1], ar2); if (r) goto fail1; + + /* Sanity check, second interface must have an endpoint */ alt = ar2->intf[1]->cur_altsetting; + if (alt->desc.bNumEndpoints < 1 || !alt->endpoint) { + dev_err(&interface->dev, + "%s(): interface 1 must have an endpoint\n", __func__); + r = -ENODEV; + goto fail2; + } ar2->ep[1] = &alt->endpoint[0].desc; r = ati_remote2_urb_init(ar2); if (r) - goto fail2; + goto fail3; ar2->channel_mask = channel_mask; ar2->mode_mask = mode_mask; r = ati_remote2_setup(ar2, ar2->channel_mask); if (r) - goto fail2; + goto fail3; usb_make_path(udev, ar2->phys, sizeof(ar2->phys)); strlcat(ar2->phys, "/input0", sizeof(ar2->phys)); @@ -845,11 +868,11 @@ static int ati_remote2_probe(struct usb_interface *interface, const struct usb_d r = sysfs_create_group(&udev->dev.kobj, &ati_remote2_attr_group); if (r) - goto fail2; + goto fail3; r = ati_remote2_input_init(ar2); if (r) - goto fail3; + goto fail4; usb_set_intfdata(interface, ar2); @@ -857,10 +880,11 @@ static int ati_remote2_probe(struct usb_interface *interface, const struct usb_d return 0; - fail3: + fail4: sysfs_remove_group(&udev->dev.kobj, &ati_remote2_attr_group); - fail2: + fail3: ati_remote2_urb_cleanup(ar2); + fail2: usb_driver_release_interface(&ati_remote2_driver, ar2->intf[1]); fail1: kfree(ar2); diff --git a/drivers/input/misc/ims-pcu.c b/drivers/input/misc/ims-pcu.c index ac1fa5f44580..9c0ea36913b4 100644 --- a/drivers/input/misc/ims-pcu.c +++ b/drivers/input/misc/ims-pcu.c @@ -1663,6 +1663,8 @@ static int ims_pcu_parse_cdc_data(struct usb_interface *intf, struct ims_pcu *pc pcu->ctrl_intf = usb_ifnum_to_if(pcu->udev, union_desc->bMasterInterface0); + if (!pcu->ctrl_intf) + return -EINVAL; alt = pcu->ctrl_intf->cur_altsetting; pcu->ep_ctrl = &alt->endpoint[0].desc; @@ -1670,6 +1672,8 @@ static int ims_pcu_parse_cdc_data(struct usb_interface *intf, struct ims_pcu *pc pcu->data_intf = usb_ifnum_to_if(pcu->udev, union_desc->bSlaveInterface0); + if (!pcu->data_intf) + return -EINVAL; alt = pcu->data_intf->cur_altsetting; if (alt->desc.bNumEndpoints != 2) { diff --git a/drivers/input/mouse/byd.c b/drivers/input/mouse/byd.c index 9425e0f6c5ce..fdc243ca93ed 100644 --- a/drivers/input/mouse/byd.c +++ b/drivers/input/mouse/byd.c @@ -12,10 +12,12 @@ #include <linux/input.h> #include <linux/libps2.h> #include <linux/serio.h> +#include <linux/slab.h> #include "psmouse.h" #include "byd.h" +/* PS2 Bits */ #define PS2_Y_OVERFLOW BIT_MASK(7) #define PS2_X_OVERFLOW BIT_MASK(6) #define PS2_Y_SIGN BIT_MASK(5) @@ -26,69 +28,249 @@ #define PS2_LEFT BIT_MASK(0) /* - * The touchpad reports gestures in the last byte of each packet. It can take - * any of the following values: + * BYD pad constants */ -/* One-finger scrolling in one of the edge scroll zones. */ -#define BYD_SCROLLUP 0xCA -#define BYD_SCROLLDOWN 0x36 -#define BYD_SCROLLLEFT 0xCB -#define BYD_SCROLLRIGHT 0x35 -/* Two-finger scrolling. */ -#define BYD_2DOWN 0x2B -#define BYD_2UP 0xD5 -#define BYD_2LEFT 0xD6 -#define BYD_2RIGHT 0x2A -/* Pinching in or out. */ -#define BYD_ZOOMOUT 0xD8 -#define BYD_ZOOMIN 0x28 -/* Three-finger swipe. */ -#define BYD_3UP 0xD3 -#define BYD_3DOWN 0x2D -#define BYD_3LEFT 0xD4 -#define BYD_3RIGHT 0x2C -/* Four-finger swipe. */ -#define BYD_4UP 0xCD -#define BYD_4DOWN 0x33 +/* + * True device resolution is unknown, however experiments show the + * resolution is about 111 units/mm. + * Absolute coordinate packets are in the range 0-255 for both X and Y + * we pick ABS_X/ABS_Y dimensions which are multiples of 256 and in + * the right ballpark given the touchpad's physical dimensions and estimate + * resolution per spec sheet, device active area dimensions are + * 101.6 x 60.1 mm. + */ +#define BYD_PAD_WIDTH 11264 +#define BYD_PAD_HEIGHT 6656 +#define BYD_PAD_RESOLUTION 111 -int byd_detect(struct psmouse *psmouse, bool set_properties) +/* + * Given the above dimensions, relative packets velocity is in multiples of + * 1 unit / 11 milliseconds. We use this dt to estimate distance traveled + */ +#define BYD_DT 11 +/* Time in jiffies used to timeout various touch events (64 ms) */ +#define BYD_TOUCH_TIMEOUT msecs_to_jiffies(64) + +/* BYD commands reverse engineered from windows driver */ + +/* + * Swipe gesture from off-pad to on-pad + * 0 : disable + * 1 : enable + */ +#define BYD_CMD_SET_OFFSCREEN_SWIPE 0x10cc +/* + * Tap and drag delay time + * 0 : disable + * 1 - 8 : least to most delay + */ +#define BYD_CMD_SET_TAP_DRAG_DELAY_TIME 0x10cf +/* + * Physical buttons function mapping + * 0 : enable + * 4 : normal + * 5 : left button custom command + * 6 : right button custom command + * 8 : disable + */ +#define BYD_CMD_SET_PHYSICAL_BUTTONS 0x10d0 +/* + * Absolute mode (1 byte X/Y resolution) + * 0 : disable + * 2 : enable + */ +#define BYD_CMD_SET_ABSOLUTE_MODE 0x10d1 +/* + * Two finger scrolling + * 1 : vertical + * 2 : horizontal + * 3 : vertical + horizontal + * 4 : disable + */ +#define BYD_CMD_SET_TWO_FINGER_SCROLL 0x10d2 +/* + * Handedness + * 1 : right handed + * 2 : left handed + */ +#define BYD_CMD_SET_HANDEDNESS 0x10d3 +/* + * Tap to click + * 1 : enable + * 2 : disable + */ +#define BYD_CMD_SET_TAP 0x10d4 +/* + * Tap and drag + * 1 : tap and hold to drag + * 2 : tap and hold to drag + lock + * 3 : disable + */ +#define BYD_CMD_SET_TAP_DRAG 0x10d5 +/* + * Touch sensitivity + * 1 - 7 : least to most sensitive + */ +#define BYD_CMD_SET_TOUCH_SENSITIVITY 0x10d6 +/* + * One finger scrolling + * 1 : vertical + * 2 : horizontal + * 3 : vertical + horizontal + * 4 : disable + */ +#define BYD_CMD_SET_ONE_FINGER_SCROLL 0x10d7 +/* + * One finger scrolling function + * 1 : free scrolling + * 2 : edge motion + * 3 : free scrolling + edge motion + * 4 : disable + */ +#define BYD_CMD_SET_ONE_FINGER_SCROLL_FUNC 0x10d8 +/* + * Sliding speed + * 1 - 5 : slowest to fastest + */ +#define BYD_CMD_SET_SLIDING_SPEED 0x10da +/* + * Edge motion + * 1 : disable + * 2 : enable when dragging + * 3 : enable when dragging and pointing + */ +#define BYD_CMD_SET_EDGE_MOTION 0x10db +/* + * Left edge region size + * 0 - 7 : smallest to largest width + */ +#define BYD_CMD_SET_LEFT_EDGE_REGION 0x10dc +/* + * Top edge region size + * 0 - 9 : smallest to largest height + */ +#define BYD_CMD_SET_TOP_EDGE_REGION 0x10dd +/* + * Disregard palm press as clicks + * 1 - 6 : smallest to largest + */ +#define BYD_CMD_SET_PALM_CHECK 0x10de +/* + * Right edge region size + * 0 - 7 : smallest to largest width + */ +#define BYD_CMD_SET_RIGHT_EDGE_REGION 0x10df +/* + * Bottom edge region size + * 0 - 9 : smallest to largest height + */ +#define BYD_CMD_SET_BOTTOM_EDGE_REGION 0x10e1 +/* + * Multitouch gestures + * 1 : enable + * 2 : disable + */ +#define BYD_CMD_SET_MULTITOUCH 0x10e3 +/* + * Edge motion speed + * 0 : control with finger pressure + * 1 - 9 : slowest to fastest + */ +#define BYD_CMD_SET_EDGE_MOTION_SPEED 0x10e4 +/* + * Two finger scolling function + * 0 : free scrolling + * 1 : free scrolling (with momentum) + * 2 : edge motion + * 3 : free scrolling (with momentum) + edge motion + * 4 : disable + */ +#define BYD_CMD_SET_TWO_FINGER_SCROLL_FUNC 0x10e5 + +/* + * The touchpad generates a mixture of absolute and relative packets, indicated + * by the the last byte of each packet being set to one of the following: + */ +#define BYD_PACKET_ABSOLUTE 0xf8 +#define BYD_PACKET_RELATIVE 0x00 +/* Multitouch gesture packets */ +#define BYD_PACKET_PINCH_IN 0xd8 +#define BYD_PACKET_PINCH_OUT 0x28 +#define BYD_PACKET_ROTATE_CLOCKWISE 0x29 +#define BYD_PACKET_ROTATE_ANTICLOCKWISE 0xd7 +#define BYD_PACKET_TWO_FINGER_SCROLL_RIGHT 0x2a +#define BYD_PACKET_TWO_FINGER_SCROLL_DOWN 0x2b +#define BYD_PACKET_TWO_FINGER_SCROLL_UP 0xd5 +#define BYD_PACKET_TWO_FINGER_SCROLL_LEFT 0xd6 +#define BYD_PACKET_THREE_FINGER_SWIPE_RIGHT 0x2c +#define BYD_PACKET_THREE_FINGER_SWIPE_DOWN 0x2d +#define BYD_PACKET_THREE_FINGER_SWIPE_UP 0xd3 +#define BYD_PACKET_THREE_FINGER_SWIPE_LEFT 0xd4 +#define BYD_PACKET_FOUR_FINGER_DOWN 0x33 +#define BYD_PACKET_FOUR_FINGER_UP 0xcd +#define BYD_PACKET_REGION_SCROLL_RIGHT 0x35 +#define BYD_PACKET_REGION_SCROLL_DOWN 0x36 +#define BYD_PACKET_REGION_SCROLL_UP 0xca +#define BYD_PACKET_REGION_SCROLL_LEFT 0xcb +#define BYD_PACKET_RIGHT_CORNER_CLICK 0xd2 +#define BYD_PACKET_LEFT_CORNER_CLICK 0x2e +#define BYD_PACKET_LEFT_AND_RIGHT_CORNER_CLICK 0x2f +#define BYD_PACKET_ONTO_PAD_SWIPE_RIGHT 0x37 +#define BYD_PACKET_ONTO_PAD_SWIPE_DOWN 0x30 +#define BYD_PACKET_ONTO_PAD_SWIPE_UP 0xd0 +#define BYD_PACKET_ONTO_PAD_SWIPE_LEFT 0xc9 + +struct byd_data { + struct timer_list timer; + s32 abs_x; + s32 abs_y; + typeof(jiffies) last_touch_time; + bool btn_left; + bool btn_right; + bool touch; +}; + +static void byd_report_input(struct psmouse *psmouse) { - struct ps2dev *ps2dev = &psmouse->ps2dev; - unsigned char param[4]; + struct byd_data *priv = psmouse->private; + struct input_dev *dev = psmouse->dev; - param[0] = 0x03; - param[1] = 0x00; - param[2] = 0x00; - param[3] = 0x00; + input_report_key(dev, BTN_TOUCH, priv->touch); + input_report_key(dev, BTN_TOOL_FINGER, priv->touch); - if (ps2_command(ps2dev, param, PSMOUSE_CMD_SETRES)) - return -1; - if (ps2_command(ps2dev, param, PSMOUSE_CMD_SETRES)) - return -1; - if (ps2_command(ps2dev, param, PSMOUSE_CMD_SETRES)) - return -1; - if (ps2_command(ps2dev, param, PSMOUSE_CMD_SETRES)) - return -1; - if (ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO)) - return -1; + input_report_abs(dev, ABS_X, priv->abs_x); + input_report_abs(dev, ABS_Y, priv->abs_y); + input_report_key(dev, BTN_LEFT, priv->btn_left); + input_report_key(dev, BTN_RIGHT, priv->btn_right); - if (param[1] != 0x03 || param[2] != 0x64) - return -ENODEV; + input_sync(dev); +} - psmouse_dbg(psmouse, "BYD touchpad detected\n"); +static void byd_clear_touch(unsigned long data) +{ + struct psmouse *psmouse = (struct psmouse *)data; + struct byd_data *priv = psmouse->private; - if (set_properties) { - psmouse->vendor = "BYD"; - psmouse->name = "TouchPad"; - } + serio_pause_rx(psmouse->ps2dev.serio); + priv->touch = false; - return 0; + byd_report_input(psmouse); + + serio_continue_rx(psmouse->ps2dev.serio); + + /* + * Move cursor back to center of pad when we lose touch - this + * specifically improves user experience when moving cursor with one + * finger, and pressing a button with another. + */ + priv->abs_x = BYD_PAD_WIDTH / 2; + priv->abs_y = BYD_PAD_HEIGHT / 2; } static psmouse_ret_t byd_process_byte(struct psmouse *psmouse) { - struct input_dev *dev = psmouse->dev; + struct byd_data *priv = psmouse->private; u8 *pkt = psmouse->packet; if (psmouse->pktcnt > 0 && !(pkt[0] & PS2_ALWAYS_1)) { @@ -102,53 +284,34 @@ static psmouse_ret_t byd_process_byte(struct psmouse *psmouse) /* Otherwise, a full packet has been received */ switch (pkt[3]) { - case 0: { + case BYD_PACKET_ABSOLUTE: + /* Only use absolute packets for the start of movement. */ + if (!priv->touch) { + /* needed to detect tap */ + typeof(jiffies) tap_time = + priv->last_touch_time + BYD_TOUCH_TIMEOUT; + priv->touch = time_after(jiffies, tap_time); + + /* init abs position */ + priv->abs_x = pkt[1] * (BYD_PAD_WIDTH / 256); + priv->abs_y = (255 - pkt[2]) * (BYD_PAD_HEIGHT / 256); + } + break; + case BYD_PACKET_RELATIVE: { /* Standard packet */ /* Sign-extend if a sign bit is set. */ - unsigned int signx = pkt[0] & PS2_X_SIGN ? ~0xFF : 0; - unsigned int signy = pkt[0] & PS2_Y_SIGN ? ~0xFF : 0; - int dx = signx | (int) pkt[1]; - int dy = signy | (int) pkt[2]; + u32 signx = pkt[0] & PS2_X_SIGN ? ~0xFF : 0; + u32 signy = pkt[0] & PS2_Y_SIGN ? ~0xFF : 0; + s32 dx = signx | (int) pkt[1]; + s32 dy = signy | (int) pkt[2]; - input_report_rel(psmouse->dev, REL_X, dx); - input_report_rel(psmouse->dev, REL_Y, -dy); + /* Update position based on velocity */ + priv->abs_x += dx * BYD_DT; + priv->abs_y -= dy * BYD_DT; - input_report_key(psmouse->dev, BTN_LEFT, pkt[0] & PS2_LEFT); - input_report_key(psmouse->dev, BTN_RIGHT, pkt[0] & PS2_RIGHT); - input_report_key(psmouse->dev, BTN_MIDDLE, pkt[0] & PS2_MIDDLE); + priv->touch = true; break; } - - case BYD_SCROLLDOWN: - case BYD_2DOWN: - input_report_rel(dev, REL_WHEEL, -1); - break; - - case BYD_SCROLLUP: - case BYD_2UP: - input_report_rel(dev, REL_WHEEL, 1); - break; - - case BYD_SCROLLLEFT: - case BYD_2LEFT: - input_report_rel(dev, REL_HWHEEL, -1); - break; - - case BYD_SCROLLRIGHT: - case BYD_2RIGHT: - input_report_rel(dev, REL_HWHEEL, 1); - break; - - case BYD_ZOOMOUT: - case BYD_ZOOMIN: - case BYD_3UP: - case BYD_3DOWN: - case BYD_3LEFT: - case BYD_3RIGHT: - case BYD_4UP: - case BYD_4DOWN: - break; - default: psmouse_warn(psmouse, "Unrecognized Z: pkt = %02x %02x %02x %02x\n", @@ -157,134 +320,76 @@ static psmouse_ret_t byd_process_byte(struct psmouse *psmouse) return PSMOUSE_BAD_DATA; } - input_sync(dev); + priv->btn_left = pkt[0] & PS2_LEFT; + priv->btn_right = pkt[0] & PS2_RIGHT; - return PSMOUSE_FULL_PACKET; -} + byd_report_input(psmouse); -/* Send a sequence of bytes, where each is ACKed before the next is sent. */ -static int byd_send_sequence(struct psmouse *psmouse, const u8 *seq, size_t len) -{ - unsigned int i; - - for (i = 0; i < len; ++i) { - if (ps2_command(&psmouse->ps2dev, NULL, seq[i])) - return -1; + /* Reset time since last touch. */ + if (priv->touch) { + priv->last_touch_time = jiffies; + mod_timer(&priv->timer, jiffies + BYD_TOUCH_TIMEOUT); } - return 0; -} - -/* Keep scrolling after fingers are removed. */ -#define SCROLL_INERTIAL 0x01 -#define SCROLL_NO_INERTIAL 0x02 - -/* Clicking can be done by tapping or pressing. */ -#define CLICK_BOTH 0x01 -/* Clicking can only be done by pressing. */ -#define CLICK_PRESS_ONLY 0x02 -static int byd_enable(struct psmouse *psmouse) -{ - const u8 seq1[] = { 0xE2, 0x00, 0xE0, 0x02, 0xE0 }; - const u8 seq2[] = { - 0xD3, 0x01, - 0xD0, 0x00, - 0xD0, 0x04, - /* Whether clicking is done by tapping or pressing. */ - 0xD4, CLICK_PRESS_ONLY, - 0xD5, 0x01, - 0xD7, 0x03, - /* Vertical and horizontal one-finger scroll zone inertia. */ - 0xD8, SCROLL_INERTIAL, - 0xDA, 0x05, - 0xDB, 0x02, - 0xE4, 0x05, - 0xD6, 0x01, - 0xDE, 0x04, - 0xE3, 0x01, - 0xCF, 0x00, - 0xD2, 0x03, - /* Vertical and horizontal two-finger scrolling inertia. */ - 0xE5, SCROLL_INERTIAL, - 0xD9, 0x02, - 0xD9, 0x07, - 0xDC, 0x03, - 0xDD, 0x03, - 0xDF, 0x03, - 0xE1, 0x03, - 0xD1, 0x00, - 0xCE, 0x00, - 0xCC, 0x00, - 0xE0, 0x00, - 0xE2, 0x01 - }; - u8 param[4]; - - if (byd_send_sequence(psmouse, seq1, ARRAY_SIZE(seq1))) - return -1; - - /* Send a 0x01 command, which should return 4 bytes. */ - if (ps2_command(&psmouse->ps2dev, param, 0x0401)) - return -1; - - if (byd_send_sequence(psmouse, seq2, ARRAY_SIZE(seq2))) - return -1; - - return 0; + return PSMOUSE_FULL_PACKET; } -/* - * Send the set of PS/2 commands required to make it identify as an - * intellimouse with 4-byte instead of 3-byte packets. - */ -static int byd_send_intellimouse_sequence(struct psmouse *psmouse) +static int byd_reset_touchpad(struct psmouse *psmouse) { struct ps2dev *ps2dev = &psmouse->ps2dev; u8 param[4]; - int i; + size_t i; + const struct { u16 command; u8 arg; } seq[] = { - { PSMOUSE_CMD_RESET_BAT, 0 }, - { PSMOUSE_CMD_RESET_BAT, 0 }, - { PSMOUSE_CMD_GETID, 0 }, - { PSMOUSE_CMD_SETSCALE11, 0 }, - { PSMOUSE_CMD_SETSCALE11, 0 }, - { PSMOUSE_CMD_SETSCALE11, 0 }, - { PSMOUSE_CMD_GETINFO, 0 }, - { PSMOUSE_CMD_SETRES, 0x03 }, + /* + * Intellimouse initialization sequence, to get 4-byte instead + * of 3-byte packets. + */ { PSMOUSE_CMD_SETRATE, 0xC8 }, { PSMOUSE_CMD_SETRATE, 0x64 }, { PSMOUSE_CMD_SETRATE, 0x50 }, { PSMOUSE_CMD_GETID, 0 }, - { PSMOUSE_CMD_SETRATE, 0xC8 }, - { PSMOUSE_CMD_SETRATE, 0xC8 }, - { PSMOUSE_CMD_SETRATE, 0x50 }, - { PSMOUSE_CMD_GETID, 0 }, - { PSMOUSE_CMD_SETRATE, 0x64 }, - { PSMOUSE_CMD_SETRES, 0x03 }, - { PSMOUSE_CMD_ENABLE, 0 } + { PSMOUSE_CMD_ENABLE, 0 }, + /* + * BYD-specific initialization, which enables absolute mode and + * (if desired), the touchpad's built-in gesture detection. + */ + { 0x10E2, 0x00 }, + { 0x10E0, 0x02 }, + /* The touchpad should reply with 4 seemingly-random bytes */ + { 0x14E0, 0x01 }, + /* Pairs of parameters and values. */ + { BYD_CMD_SET_HANDEDNESS, 0x01 }, + { BYD_CMD_SET_PHYSICAL_BUTTONS, 0x04 }, + { BYD_CMD_SET_TAP, 0x02 }, + { BYD_CMD_SET_ONE_FINGER_SCROLL, 0x04 }, + { BYD_CMD_SET_ONE_FINGER_SCROLL_FUNC, 0x04 }, + { BYD_CMD_SET_EDGE_MOTION, 0x01 }, + { BYD_CMD_SET_PALM_CHECK, 0x00 }, + { BYD_CMD_SET_MULTITOUCH, 0x02 }, + { BYD_CMD_SET_TWO_FINGER_SCROLL, 0x04 }, + { BYD_CMD_SET_TWO_FINGER_SCROLL_FUNC, 0x04 }, + { BYD_CMD_SET_LEFT_EDGE_REGION, 0x00 }, + { BYD_CMD_SET_TOP_EDGE_REGION, 0x00 }, + { BYD_CMD_SET_RIGHT_EDGE_REGION, 0x00 }, + { BYD_CMD_SET_BOTTOM_EDGE_REGION, 0x00 }, + { BYD_CMD_SET_ABSOLUTE_MODE, 0x02 }, + /* Finalize initialization. */ + { 0x10E0, 0x00 }, + { 0x10E2, 0x01 }, }; - memset(param, 0, sizeof(param)); for (i = 0; i < ARRAY_SIZE(seq); ++i) { + memset(param, 0, sizeof(param)); param[0] = seq[i].arg; if (ps2_command(ps2dev, param, seq[i].command)) - return -1; + return -EIO; } - return 0; -} - -static int byd_reset_touchpad(struct psmouse *psmouse) -{ - if (byd_send_intellimouse_sequence(psmouse)) - return -EIO; - - if (byd_enable(psmouse)) - return -EIO; - + psmouse_set_state(psmouse, PSMOUSE_ACTIVATED); return 0; } @@ -314,9 +419,50 @@ static int byd_reconnect(struct psmouse *psmouse) return 0; } +static void byd_disconnect(struct psmouse *psmouse) +{ + struct byd_data *priv = psmouse->private; + + if (priv) { + del_timer(&priv->timer); + kfree(psmouse->private); + psmouse->private = NULL; + } +} + +int byd_detect(struct psmouse *psmouse, bool set_properties) +{ + struct ps2dev *ps2dev = &psmouse->ps2dev; + u8 param[4] = {0x03, 0x00, 0x00, 0x00}; + + if (ps2_command(ps2dev, param, PSMOUSE_CMD_SETRES)) + return -1; + if (ps2_command(ps2dev, param, PSMOUSE_CMD_SETRES)) + return -1; + if (ps2_command(ps2dev, param, PSMOUSE_CMD_SETRES)) + return -1; + if (ps2_command(ps2dev, param, PSMOUSE_CMD_SETRES)) + return -1; + if (ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO)) + return -1; + + if (param[1] != 0x03 || param[2] != 0x64) + return -ENODEV; + + psmouse_dbg(psmouse, "BYD touchpad detected\n"); + + if (set_properties) { + psmouse->vendor = "BYD"; + psmouse->name = "TouchPad"; + } + + return 0; +} + int byd_init(struct psmouse *psmouse) { struct input_dev *dev = psmouse->dev; + struct byd_data *priv; if (psmouse_reset(psmouse)) return -EIO; @@ -324,14 +470,39 @@ int byd_init(struct psmouse *psmouse) if (byd_reset_touchpad(psmouse)) return -EIO; + priv = kzalloc(sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + memset(priv, 0, sizeof(*priv)); + setup_timer(&priv->timer, byd_clear_touch, (unsigned long) psmouse); + + psmouse->private = priv; + psmouse->disconnect = byd_disconnect; psmouse->reconnect = byd_reconnect; psmouse->protocol_handler = byd_process_byte; psmouse->pktsize = 4; psmouse->resync_time = 0; - __set_bit(BTN_MIDDLE, dev->keybit); - __set_bit(REL_WHEEL, dev->relbit); - __set_bit(REL_HWHEEL, dev->relbit); + __set_bit(INPUT_PROP_POINTER, dev->propbit); + /* Touchpad */ + __set_bit(BTN_TOUCH, dev->keybit); + __set_bit(BTN_TOOL_FINGER, dev->keybit); + /* Buttons */ + __set_bit(BTN_LEFT, dev->keybit); + __set_bit(BTN_RIGHT, dev->keybit); + __clear_bit(BTN_MIDDLE, dev->keybit); + + /* Absolute position */ + __set_bit(EV_ABS, dev->evbit); + input_set_abs_params(dev, ABS_X, 0, BYD_PAD_WIDTH, 0, 0); + input_set_abs_params(dev, ABS_Y, 0, BYD_PAD_HEIGHT, 0, 0); + input_abs_set_res(dev, ABS_X, BYD_PAD_RESOLUTION); + input_abs_set_res(dev, ABS_Y, BYD_PAD_RESOLUTION); + /* No relative support */ + __clear_bit(EV_REL, dev->evbit); + __clear_bit(REL_X, dev->relbit); + __clear_bit(REL_Y, dev->relbit); return 0; } diff --git a/drivers/input/mouse/psmouse-base.c b/drivers/input/mouse/psmouse-base.c index 39d1becd35c9..5784e20542a4 100644 --- a/drivers/input/mouse/psmouse-base.c +++ b/drivers/input/mouse/psmouse-base.c @@ -846,7 +846,7 @@ static const struct psmouse_protocol psmouse_protocols[] = { #ifdef CONFIG_MOUSE_PS2_BYD { .type = PSMOUSE_BYD, - .name = "BydPS/2", + .name = "BYDPS/2", .alias = "byd", .detect = byd_detect, .init = byd_init, diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c index 6025eb430c0a..a41d8328c064 100644 --- a/drivers/input/mouse/synaptics.c +++ b/drivers/input/mouse/synaptics.c @@ -862,8 +862,9 @@ static void synaptics_report_ext_buttons(struct psmouse *psmouse, if (!SYN_CAP_MULTI_BUTTON_NO(priv->ext_cap)) return; - /* Bug in FW 8.1, buttons are reported only when ExtBit is 1 */ - if (SYN_ID_FULL(priv->identity) == 0x801 && + /* Bug in FW 8.1 & 8.2, buttons are reported only when ExtBit is 1 */ + if ((SYN_ID_FULL(priv->identity) == 0x801 || + SYN_ID_FULL(priv->identity) == 0x802) && !((psmouse->packet[0] ^ psmouse->packet[3]) & 0x02)) return; diff --git a/drivers/input/rmi4/rmi_driver.c b/drivers/input/rmi4/rmi_driver.c index da38f0ad80ed..faa295ec4f31 100644 --- a/drivers/input/rmi4/rmi_driver.c +++ b/drivers/input/rmi4/rmi_driver.c @@ -126,7 +126,7 @@ static void process_one_interrupt(struct rmi_driver_data *data, return; fh = to_rmi_function_handler(fn->dev.driver); - if (fn->irq_mask && fh->attention) { + if (fh->attention) { bitmap_and(data->fn_irq_bits, data->irq_status, fn->irq_mask, data->irq_count); if (!bitmap_empty(data->fn_irq_bits, data->irq_count)) @@ -172,8 +172,7 @@ int rmi_process_interrupt_requests(struct rmi_device *rmi_dev) * use irq_chip. */ list_for_each_entry(entry, &data->function_list, node) - if (entry->irq_mask) - process_one_interrupt(data, entry); + process_one_interrupt(data, entry); if (data->input) input_sync(data->input); diff --git a/drivers/input/touchscreen/melfas_mip4.c b/drivers/input/touchscreen/melfas_mip4.c index 892729734c51..fb5fb9140ca9 100644 --- a/drivers/input/touchscreen/melfas_mip4.c +++ b/drivers/input/touchscreen/melfas_mip4.c @@ -1310,8 +1310,34 @@ static ssize_t mip4_sysfs_read_fw_version(struct device *dev, static DEVICE_ATTR(fw_version, S_IRUGO, mip4_sysfs_read_fw_version, NULL); +static ssize_t mip4_sysfs_read_hw_version(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct i2c_client *client = to_i2c_client(dev); + struct mip4_ts *ts = i2c_get_clientdata(client); + size_t count; + + /* Take lock to prevent racing with firmware update */ + mutex_lock(&ts->input->mutex); + + /* + * product_name shows the name or version of the hardware + * paired with current firmware in the chip. + */ + count = snprintf(buf, PAGE_SIZE, "%.*s\n", + (int)sizeof(ts->product_name), ts->product_name); + + mutex_unlock(&ts->input->mutex); + + return count; +} + +static DEVICE_ATTR(hw_version, S_IRUGO, mip4_sysfs_read_hw_version, NULL); + static struct attribute *mip4_attrs[] = { &dev_attr_fw_version.attr, + &dev_attr_hw_version.attr, &dev_attr_update_fw.attr, NULL, }; @@ -1512,6 +1538,6 @@ static struct i2c_driver mip4_driver = { module_i2c_driver(mip4_driver); MODULE_DESCRIPTION("MELFAS MIP4 Touchscreen"); -MODULE_VERSION("2016.03.03"); +MODULE_VERSION("2016.03.12"); MODULE_AUTHOR("Sangwon Jee <jeesw@melfas.com>"); MODULE_LICENSE("GPL"); diff --git a/drivers/input/touchscreen/sur40.c b/drivers/input/touchscreen/sur40.c index b6c4d03de340..880c40b23f66 100644 --- a/drivers/input/touchscreen/sur40.c +++ b/drivers/input/touchscreen/sur40.c @@ -197,28 +197,34 @@ static int sur40_command(struct sur40_state *dev, static int sur40_init(struct sur40_state *dev) { int result; - u8 buffer[24]; + u8 *buffer; + + buffer = kmalloc(24, GFP_KERNEL); + if (!buffer) { + result = -ENOMEM; + goto error; + } /* stupidly replay the original MS driver init sequence */ result = sur40_command(dev, SUR40_GET_VERSION, 0x00, buffer, 12); if (result < 0) - return result; + goto error; result = sur40_command(dev, SUR40_GET_VERSION, 0x01, buffer, 12); if (result < 0) - return result; + goto error; result = sur40_command(dev, SUR40_GET_VERSION, 0x02, buffer, 12); if (result < 0) - return result; + goto error; result = sur40_command(dev, SUR40_UNKNOWN2, 0x00, buffer, 24); if (result < 0) - return result; + goto error; result = sur40_command(dev, SUR40_UNKNOWN1, 0x00, buffer, 5); if (result < 0) - return result; + goto error; result = sur40_command(dev, SUR40_GET_VERSION, 0x03, buffer, 12); @@ -226,7 +232,8 @@ static int sur40_init(struct sur40_state *dev) * Discard the result buffer - no known data inside except * some version strings, maybe extract these sometime... */ - +error: + kfree(buffer); return result; } |