diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/iio/accel/bmc150-accel-core.c | 7 | ||||
| -rw-r--r-- | drivers/iio/adc/Kconfig | 1 | ||||
| -rw-r--r-- | drivers/iio/adc/max1363.c | 12 | ||||
| -rw-r--r-- | drivers/iio/gyro/bmg160_core.c | 9 | ||||
| -rw-r--r-- | drivers/iio/health/max30100.c | 3 | ||||
| -rw-r--r-- | drivers/iio/imu/inv_mpu6050/Kconfig | 3 | ||||
| -rw-r--r-- | drivers/iio/industrialio-buffer.c | 1 | ||||
| -rw-r--r-- | drivers/iio/light/apds9960.c | 3 | ||||
| -rw-r--r-- | drivers/iio/magnetometer/st_magn.h | 1 | ||||
| -rw-r--r-- | drivers/staging/Kconfig | 2 | ||||
| -rw-r--r-- | drivers/staging/Makefile | 1 | ||||
| -rw-r--r-- | drivers/staging/olpc_dcon/Kconfig | 35 | ||||
| -rw-r--r-- | drivers/staging/olpc_dcon/Makefile | 6 | ||||
| -rw-r--r-- | drivers/staging/olpc_dcon/TODO | 9 | ||||
| -rw-r--r-- | drivers/staging/olpc_dcon/olpc_dcon.c | 813 | ||||
| -rw-r--r-- | drivers/staging/olpc_dcon/olpc_dcon.h | 111 | ||||
| -rw-r--r-- | drivers/staging/olpc_dcon/olpc_dcon_xo_1.c | 205 | ||||
| -rw-r--r-- | drivers/staging/olpc_dcon/olpc_dcon_xo_1_5.c | 161 | ||||
| -rw-r--r-- | drivers/staging/rdma/hfi1/Kconfig | 1 |
19 files changed, 1369 insertions, 15 deletions
diff --git a/drivers/iio/accel/bmc150-accel-core.c b/drivers/iio/accel/bmc150-accel-core.c index c73331f7782b..2072a31e813b 100644 --- a/drivers/iio/accel/bmc150-accel-core.c +++ b/drivers/iio/accel/bmc150-accel-core.c @@ -547,7 +547,7 @@ static int bmc150_accel_get_axis(struct bmc150_accel_data *data, { int ret; int axis = chan->scan_index; - unsigned int raw_val; + __le16 raw_val; mutex_lock(&data->mutex); ret = bmc150_accel_set_power_state(data, true); @@ -557,14 +557,14 @@ static int bmc150_accel_get_axis(struct bmc150_accel_data *data, } ret = regmap_bulk_read(data->regmap, BMC150_ACCEL_AXIS_TO_REG(axis), - &raw_val, 2); + &raw_val, sizeof(raw_val)); if (ret < 0) { dev_err(data->dev, "Error reading axis %d\n", axis); bmc150_accel_set_power_state(data, false); mutex_unlock(&data->mutex); return ret; } - *val = sign_extend32(raw_val >> chan->scan_type.shift, + *val = sign_extend32(le16_to_cpu(raw_val) >> chan->scan_type.shift, chan->scan_type.realbits - 1); ret = bmc150_accel_set_power_state(data, false); mutex_unlock(&data->mutex); @@ -988,6 +988,7 @@ static const struct iio_event_spec bmc150_accel_event = { .realbits = (bits), \ .storagebits = 16, \ .shift = 16 - (bits), \ + .endianness = IIO_LE, \ }, \ .event_spec = &bmc150_accel_event, \ .num_event_specs = 1 \ diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig index af4aea7b20f9..82c718c515a0 100644 --- a/drivers/iio/adc/Kconfig +++ b/drivers/iio/adc/Kconfig @@ -134,6 +134,7 @@ config AT91_ADC config AT91_SAMA5D2_ADC tristate "Atmel AT91 SAMA5D2 ADC" depends on ARCH_AT91 || COMPILE_TEST + depends on HAS_IOMEM help Say yes here to build support for Atmel SAMA5D2 ADC which is available on SAMA5D2 SoC family. diff --git a/drivers/iio/adc/max1363.c b/drivers/iio/adc/max1363.c index 929508e5266c..998dc3caad4c 100644 --- a/drivers/iio/adc/max1363.c +++ b/drivers/iio/adc/max1363.c @@ -1386,7 +1386,7 @@ static const struct max1363_chip_info max1363_chip_info_tbl[] = { }, [max11644] = { .bits = 12, - .int_vref_mv = 2048, + .int_vref_mv = 4096, .mode_list = max11644_mode_list, .num_modes = ARRAY_SIZE(max11644_mode_list), .default_mode = s0to1, @@ -1396,7 +1396,7 @@ static const struct max1363_chip_info max1363_chip_info_tbl[] = { }, [max11645] = { .bits = 12, - .int_vref_mv = 4096, + .int_vref_mv = 2048, .mode_list = max11644_mode_list, .num_modes = ARRAY_SIZE(max11644_mode_list), .default_mode = s0to1, @@ -1406,7 +1406,7 @@ static const struct max1363_chip_info max1363_chip_info_tbl[] = { }, [max11646] = { .bits = 10, - .int_vref_mv = 2048, + .int_vref_mv = 4096, .mode_list = max11644_mode_list, .num_modes = ARRAY_SIZE(max11644_mode_list), .default_mode = s0to1, @@ -1416,7 +1416,7 @@ static const struct max1363_chip_info max1363_chip_info_tbl[] = { }, [max11647] = { .bits = 10, - .int_vref_mv = 4096, + .int_vref_mv = 2048, .mode_list = max11644_mode_list, .num_modes = ARRAY_SIZE(max11644_mode_list), .default_mode = s0to1, @@ -1680,6 +1680,10 @@ static const struct i2c_device_id max1363_id[] = { { "max11615", max11615 }, { "max11616", max11616 }, { "max11617", max11617 }, + { "max11644", max11644 }, + { "max11645", max11645 }, + { "max11646", max11646 }, + { "max11647", max11647 }, {} }; diff --git a/drivers/iio/gyro/bmg160_core.c b/drivers/iio/gyro/bmg160_core.c index bbce3b09ac45..4dac567e75b4 100644 --- a/drivers/iio/gyro/bmg160_core.c +++ b/drivers/iio/gyro/bmg160_core.c @@ -452,7 +452,7 @@ static int bmg160_get_temp(struct bmg160_data *data, int *val) static int bmg160_get_axis(struct bmg160_data *data, int axis, int *val) { int ret; - unsigned int raw_val; + __le16 raw_val; mutex_lock(&data->mutex); ret = bmg160_set_power_state(data, true); @@ -462,7 +462,7 @@ static int bmg160_get_axis(struct bmg160_data *data, int axis, int *val) } ret = regmap_bulk_read(data->regmap, BMG160_AXIS_TO_REG(axis), &raw_val, - 2); + sizeof(raw_val)); if (ret < 0) { dev_err(data->dev, "Error reading axis %d\n", axis); bmg160_set_power_state(data, false); @@ -470,7 +470,7 @@ static int bmg160_get_axis(struct bmg160_data *data, int axis, int *val) return ret; } - *val = sign_extend32(raw_val, 15); + *val = sign_extend32(le16_to_cpu(raw_val), 15); ret = bmg160_set_power_state(data, false); mutex_unlock(&data->mutex); if (ret < 0) @@ -733,6 +733,7 @@ static const struct iio_event_spec bmg160_event = { .sign = 's', \ .realbits = 16, \ .storagebits = 16, \ + .endianness = IIO_LE, \ }, \ .event_spec = &bmg160_event, \ .num_event_specs = 1 \ @@ -780,7 +781,7 @@ static irqreturn_t bmg160_trigger_handler(int irq, void *p) mutex_unlock(&data->mutex); goto err; } - data->buffer[i++] = ret; + data->buffer[i++] = val; } mutex_unlock(&data->mutex); diff --git a/drivers/iio/health/max30100.c b/drivers/iio/health/max30100.c index 09db89359544..90ab8a2d2846 100644 --- a/drivers/iio/health/max30100.c +++ b/drivers/iio/health/max30100.c @@ -238,12 +238,13 @@ static irqreturn_t max30100_interrupt_handler(int irq, void *private) mutex_lock(&data->lock); - while (cnt-- || (cnt = max30100_fifo_count(data) > 0)) { + while (cnt || (cnt = max30100_fifo_count(data) > 0)) { ret = max30100_read_measurement(data); if (ret) break; iio_push_to_buffers(data->indio_dev, data->buffer); + cnt--; } mutex_unlock(&data->lock); diff --git a/drivers/iio/imu/inv_mpu6050/Kconfig b/drivers/iio/imu/inv_mpu6050/Kconfig index a7f557af4389..847455a2d6bb 100644 --- a/drivers/iio/imu/inv_mpu6050/Kconfig +++ b/drivers/iio/imu/inv_mpu6050/Kconfig @@ -9,9 +9,8 @@ config INV_MPU6050_IIO config INV_MPU6050_I2C tristate "Invensense MPU6050 devices (I2C)" - depends on I2C + depends on I2C_MUX select INV_MPU6050_IIO - select I2C_MUX select REGMAP_I2C help This driver supports the Invensense MPU6050 devices. diff --git a/drivers/iio/industrialio-buffer.c b/drivers/iio/industrialio-buffer.c index b976332d45d3..90462fcf5436 100644 --- a/drivers/iio/industrialio-buffer.c +++ b/drivers/iio/industrialio-buffer.c @@ -653,6 +653,7 @@ static int iio_verify_update(struct iio_dev *indio_dev, unsigned int modes; memset(config, 0, sizeof(*config)); + config->watermark = ~0; /* * If there is just one buffer and we are removing it there is nothing diff --git a/drivers/iio/light/apds9960.c b/drivers/iio/light/apds9960.c index f6a07dc32ae4..a6af56ad10e1 100644 --- a/drivers/iio/light/apds9960.c +++ b/drivers/iio/light/apds9960.c @@ -769,7 +769,7 @@ static void apds9960_read_gesture_fifo(struct apds9960_data *data) mutex_lock(&data->lock); data->gesture_mode_running = 1; - while (cnt-- || (cnt = apds9660_fifo_is_empty(data) > 0)) { + while (cnt || (cnt = apds9660_fifo_is_empty(data) > 0)) { ret = regmap_bulk_read(data->regmap, APDS9960_REG_GFIFO_BASE, &data->buffer, 4); @@ -777,6 +777,7 @@ static void apds9960_read_gesture_fifo(struct apds9960_data *data) goto err_read; iio_push_to_buffers(data->indio_dev, data->buffer); + cnt--; } err_read: diff --git a/drivers/iio/magnetometer/st_magn.h b/drivers/iio/magnetometer/st_magn.h index 06a4d9c35581..9daca4681922 100644 --- a/drivers/iio/magnetometer/st_magn.h +++ b/drivers/iio/magnetometer/st_magn.h @@ -44,6 +44,7 @@ static inline int st_magn_allocate_ring(struct iio_dev *indio_dev) static inline void st_magn_deallocate_ring(struct iio_dev *indio_dev) { } +#define ST_MAGN_TRIGGER_SET_STATE NULL #endif /* CONFIG_IIO_BUFFER */ #endif /* ST_MAGN_H */ diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig index cf84581287b9..5bac28a3944e 100644 --- a/drivers/staging/Kconfig +++ b/drivers/staging/Kconfig @@ -30,6 +30,8 @@ source "drivers/staging/wlan-ng/Kconfig" source "drivers/staging/comedi/Kconfig" +source "drivers/staging/olpc_dcon/Kconfig" + source "drivers/staging/rtl8192u/Kconfig" source "drivers/staging/rtl8192e/Kconfig" diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile index 7d6448d20464..a954242b0f2c 100644 --- a/drivers/staging/Makefile +++ b/drivers/staging/Makefile @@ -4,6 +4,7 @@ obj-y += media/ obj-$(CONFIG_SLICOSS) += slicoss/ obj-$(CONFIG_PRISM2_USB) += wlan-ng/ obj-$(CONFIG_COMEDI) += comedi/ +obj-$(CONFIG_FB_OLPC_DCON) += olpc_dcon/ obj-$(CONFIG_RTL8192U) += rtl8192u/ obj-$(CONFIG_RTL8192E) += rtl8192e/ obj-$(CONFIG_R8712U) += rtl8712/ diff --git a/drivers/staging/olpc_dcon/Kconfig b/drivers/staging/olpc_dcon/Kconfig new file mode 100644 index 000000000000..d277f048789e --- /dev/null +++ b/drivers/staging/olpc_dcon/Kconfig @@ -0,0 +1,35 @@ +config FB_OLPC_DCON + tristate "One Laptop Per Child Display CONtroller support" + depends on OLPC && FB + depends on I2C + depends on (GPIO_CS5535 || GPIO_CS5535=n) + select BACKLIGHT_CLASS_DEVICE + ---help--- + In order to support very low power operation, the XO laptop uses a + secondary Display CONtroller, or DCON. This secondary controller + is present in the video pipeline between the primary display + controller (integrate into the processor or chipset) and the LCD + panel. It allows the main processor/display controller to be + completely powered off while still retaining an image on the display. + This controller is only available on OLPC platforms. Unless you have + one of these platforms, you will want to say 'N'. + +config FB_OLPC_DCON_1 + bool "OLPC XO-1 DCON support" + depends on FB_OLPC_DCON && GPIO_CS5535 + default y + ---help--- + Enable support for the DCON in XO-1 model laptops. The kernel + communicates with the DCON using model-specific code. If you + have an XO-1 (or if you're unsure what model you have), you should + say 'Y'. + +config FB_OLPC_DCON_1_5 + bool "OLPC XO-1.5 DCON support" + depends on FB_OLPC_DCON && ACPI + default y + ---help--- + Enable support for the DCON in XO-1.5 model laptops. The kernel + communicates with the DCON using model-specific code. If you + have an XO-1.5 (or if you're unsure what model you have), you + should say 'Y'. diff --git a/drivers/staging/olpc_dcon/Makefile b/drivers/staging/olpc_dcon/Makefile new file mode 100644 index 000000000000..36c7e67fec20 --- /dev/null +++ b/drivers/staging/olpc_dcon/Makefile @@ -0,0 +1,6 @@ +olpc-dcon-objs += olpc_dcon.o +olpc-dcon-$(CONFIG_FB_OLPC_DCON_1) += olpc_dcon_xo_1.o +olpc-dcon-$(CONFIG_FB_OLPC_DCON_1_5) += olpc_dcon_xo_1_5.o +obj-$(CONFIG_FB_OLPC_DCON) += olpc-dcon.o + + diff --git a/drivers/staging/olpc_dcon/TODO b/drivers/staging/olpc_dcon/TODO new file mode 100644 index 000000000000..61c2e65ac354 --- /dev/null +++ b/drivers/staging/olpc_dcon/TODO @@ -0,0 +1,9 @@ +TODO: + - see if vx855 gpio API can be made similar enough to cs5535 so we can + share more code + - allow simultaneous XO-1 and XO-1.5 support + +Please send patches to Greg Kroah-Hartman <greg@kroah.com> and +copy: + Daniel Drake <dsd@laptop.org> + Jens Frederich <jfrederich@gmail.com> diff --git a/drivers/staging/olpc_dcon/olpc_dcon.c b/drivers/staging/olpc_dcon/olpc_dcon.c new file mode 100644 index 000000000000..f45b2ef05f48 --- /dev/null +++ b/drivers/staging/olpc_dcon/olpc_dcon.c @@ -0,0 +1,813 @@ +/* + * Mainly by David Woodhouse, somewhat modified by Jordan Crouse + * + * Copyright © 2006-2007 Red Hat, Inc. + * Copyright © 2006-2007 Advanced Micro Devices, Inc. + * Copyright © 2009 VIA Technology, Inc. + * Copyright (c) 2010-2011 Andres Salomon <dilinger@queued.net> + * + * This program is free software. You can redistribute it and/or + * modify it under the terms of version 2 of the GNU General Public + * License as published by the Free Software Foundation. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/kernel.h> +#include <linux/fb.h> +#include <linux/console.h> +#include <linux/i2c.h> +#include <linux/platform_device.h> +#include <linux/interrupt.h> +#include <linux/delay.h> +#include <linux/module.h> +#include <linux/backlight.h> +#include <linux/device.h> +#include <linux/uaccess.h> +#include <linux/ctype.h> +#include <linux/reboot.h> +#include <linux/olpc-ec.h> +#include <asm/tsc.h> +#include <asm/olpc.h> + +#include "olpc_dcon.h" + +/* Module definitions */ + +static ushort resumeline = 898; +module_param(resumeline, ushort, 0444); + +static struct dcon_platform_data *pdata; + +/* I2C structures */ + +/* Platform devices */ +static struct platform_device *dcon_device; + +static unsigned short normal_i2c[] = { 0x0d, I2C_CLIENT_END }; + +static s32 dcon_write(struct dcon_priv *dcon, u8 reg, u16 val) +{ + return i2c_smbus_write_word_data(dcon->client, reg, val); +} + +static s32 dcon_read(struct dcon_priv *dcon, u8 reg) +{ + return i2c_smbus_read_word_data(dcon->client, reg); +} + +/* ===== API functions - these are called by a variety of users ==== */ + +static int dcon_hw_init(struct dcon_priv *dcon, int is_init) +{ + u16 ver; + int rc = 0; + + ver = dcon_read(dcon, DCON_REG_ID); + if ((ver >> 8) != 0xDC) { + pr_err("DCON ID not 0xDCxx: 0x%04x instead.\n", ver); + rc = -ENXIO; + goto err; + } + + if (is_init) { + pr_info("Discovered DCON version %x\n", ver & 0xFF); + rc = pdata->init(dcon); + if (rc != 0) { + pr_err("Unable to init.\n"); + goto err; + } + } + + if (ver < 0xdc02) { + dev_err(&dcon->client->dev, + "DCON v1 is unsupported, giving up..\n"); + rc = -ENODEV; + goto err; + } + + /* SDRAM setup/hold time */ + dcon_write(dcon, 0x3a, 0xc040); + dcon_write(dcon, DCON_REG_MEM_OPT_A, 0x0000); /* clear option bits */ + dcon_write(dcon, DCON_REG_MEM_OPT_A, + MEM_DLL_CLOCK_DELAY | MEM_POWER_DOWN); + dcon_write(dcon, DCON_REG_MEM_OPT_B, MEM_SOFT_RESET); + + /* Colour swizzle, AA, no passthrough, backlight */ + if (is_init) { + dcon->disp_mode = MODE_PASSTHRU | MODE_BL_ENABLE | + MODE_CSWIZZLE | MODE_COL_AA; + } + dcon_write(dcon, DCON_REG_MODE, dcon->disp_mode); + + /* Set the scanline to interrupt on during resume */ + dcon_write(dcon, DCON_REG_SCAN_INT, resumeline); + +err: + return rc; +} + +/* + * The smbus doesn't always come back due to what is believed to be + * hardware (power rail) bugs. For older models where this is known to + * occur, our solution is to attempt to wait for the bus to stabilize; + * if it doesn't happen, cut power to the dcon, repower it, and wait + * for the bus to stabilize. Rinse, repeat until we have a working + * smbus. For newer models, we simply BUG(); we want to know if this + * still happens despite the power fixes that have been made! + */ +static int dcon_bus_stabilize(struct dcon_priv *dcon, int is_powered_down) +{ + unsigned long timeout; + u8 pm; + int x; + +power_up: + if (is_powered_down) { + pm = 1; + x = olpc_ec_cmd(EC_DCON_POWER_MODE, &pm, 1, NULL, 0); + if (x) { + pr_warn("unable to force dcon to power up: %d!\n", x); + return x; + } + usleep_range(10000, 11000); /* we'll be conservative */ + } + + pdata->bus_stabilize_wiggle(); + + for (x = -1, timeout = 50; timeout && x < 0; timeout--) { + usleep_range(1000, 1100); + x = dcon_read(dcon, DCON_REG_ID); + } + if (x < 0) { + pr_err("unable to stabilize dcon's smbus, reasserting power and praying.\n"); + BUG_ON(olpc_board_at_least(olpc_board(0xc2))); + pm = 0; + olpc_ec_cmd(EC_DCON_POWER_MODE, &pm, 1, NULL, 0); + msleep(100); + is_powered_down = 1; + goto power_up; /* argh, stupid hardware.. */ + } + + if (is_powered_down) + return dcon_hw_init(dcon, 0); + return 0; +} + +static void dcon_set_backlight(struct dcon_priv *dcon, u8 level) +{ + dcon->bl_val = level; + dcon_write(dcon, DCON_REG_BRIGHT, dcon->bl_val); + + /* Purposely turn off the backlight when we go to level 0 */ + if (dcon->bl_val == 0) { + dcon->disp_mode &= ~MODE_BL_ENABLE; + dcon_write(dcon, DCON_REG_MODE, dcon->disp_mode); + } else if (!(dcon->disp_mode & MODE_BL_ENABLE)) { + dcon->disp_mode |= MODE_BL_ENABLE; + dcon_write(dcon, DCON_REG_MODE, dcon->disp_mode); + } +} + +/* Set the output type to either color or mono */ +static int dcon_set_mono_mode(struct dcon_priv *dcon, bool enable_mono) +{ + if (dcon->mono == enable_mono) + return 0; + + dcon->mono = enable_mono; + + if (enable_mono) { + dcon->disp_mode &= ~(MODE_CSWIZZLE | MODE_COL_AA); + dcon->disp_mode |= MODE_MONO_LUMA; + } else { + dcon->disp_mode &= ~(MODE_MONO_LUMA); + dcon->disp_mode |= MODE_CSWIZZLE | MODE_COL_AA; + } + + dcon_write(dcon, DCON_REG_MODE, dcon->disp_mode); + return 0; +} + +/* For now, this will be really stupid - we need to address how + * DCONLOAD works in a sleep and account for it accordingly + */ + +static void dcon_sleep(struct dcon_priv *dcon, bool sleep) +{ + int x; + + /* Turn off the backlight and put the DCON to sleep */ + + if (dcon->asleep == sleep) + return; + + if (!olpc_board_at_least(olpc_board(0xc2))) + return; + + if (sleep) { + u8 pm = 0; + + x = olpc_ec_cmd(EC_DCON_POWER_MODE, &pm, 1, NULL, 0); + if (x) + pr_warn("unable to force dcon to power down: %d!\n", x); + else + dcon->asleep = sleep; + } else { + /* Only re-enable the backlight if the backlight value is set */ + if (dcon->bl_val != 0) + dcon->disp_mode |= MODE_BL_ENABLE; + x = dcon_bus_stabilize(dcon, 1); + if (x) + pr_warn("unable to reinit dcon hardware: %d!\n", x); + else + dcon->asleep = sleep; + + /* Restore backlight */ + dcon_set_backlight(dcon, dcon->bl_val); + } + + /* We should turn off some stuff in the framebuffer - but what? */ +} + +/* the DCON seems to get confused if we change DCONLOAD too + * frequently -- i.e., approximately faster than frame time. + * normally we don't change it this fast, so in general we won't + * delay here. + */ +static void dcon_load_holdoff(struct dcon_priv *dcon) +{ + ktime_t delta_t, now; + + while (1) { + now = ktime_get(); + delta_t = ktime_sub(now, dcon->load_time); + if (ktime_to_ns(delta_t) > NSEC_PER_MSEC * 20) + break; + mdelay(4); + } +} + +static bool dcon_blank_fb(struct dcon_priv *dcon, bool blank) +{ + int err; + + console_lock(); + if (!lock_fb_info(dcon->fbinfo)) { + console_unlock(); + dev_err(&dcon->client->dev, "unable to lock framebuffer\n"); + return false; + } + + dcon->ignore_fb_events = true; + err = fb_blank(dcon->fbinfo, + blank ? FB_BLANK_POWERDOWN : FB_BLANK_UNBLANK); + dcon->ignore_fb_events = false; + unlock_fb_info(dcon->fbinfo); + console_unlock(); + + if (err) { + dev_err(&dcon->client->dev, "couldn't %sblank framebuffer\n", + blank ? "" : "un"); + return false; + } + return true; +} + +/* Set the source of the display (CPU or DCON) */ +static void dcon_source_switch(struct work_struct *work) +{ + struct dcon_priv *dcon = container_of(work, struct dcon_priv, + switch_source); + int source = dcon->pending_src; + + if (dcon->curr_src == source) + return; + + dcon_load_holdoff(dcon); + + dcon->switched = false; + + switch (source) { + case DCON_SOURCE_CPU: + pr_info("dcon_source_switch to CPU\n"); + /* Enable the scanline interrupt bit */ + if (dcon_write(dcon, DCON_REG_MODE, + dcon->disp_mode | MODE_SCAN_INT)) + pr_err("couldn't enable scanline interrupt!\n"); + else + /* Wait up to one second for the scanline interrupt */ + wait_event_timeout(dcon->waitq, dcon->switched, HZ); + + if (!dcon->switched) + pr_err("Timeout entering CPU mode; expect a screen glitch.\n"); + + /* Turn off the scanline interrupt */ + if (dcon_write(dcon, DCON_REG_MODE, dcon->disp_mode)) + pr_err("couldn't disable scanline interrupt!\n"); + + /* + * Ideally we'd like to disable interrupts here so that the + * fb unblanking and DCON turn on happen at a known time value; + * however, we can't do that right now with fb_blank + * messing with semaphores. + * + * For now, we just hope.. + */ + if (!dcon_blank_fb(dcon, false)) { + pr_err("Failed to enter CPU mode\n"); + dcon->pending_src = DCON_SOURCE_DCON; + return; + } + + /* And turn off the DCON */ + pdata->set_dconload(1); + dcon->load_time = ktime_get(); + + pr_info("The CPU has control\n"); + break; + case DCON_SOURCE_DCON: + { + ktime_t delta_t; + + pr_info("dcon_source_switch to DCON\n"); + + /* Clear DCONLOAD - this implies that the DCON is in control */ + pdata->set_dconload(0); + dcon->load_time = ktime_get(); + + wait_event_timeout(dcon->waitq, dcon->switched, HZ/2); + + if (!dcon->switched) { + pr_err("Timeout entering DCON mode; expect a screen glitch.\n"); + } else { + /* sometimes the DCON doesn't follow its own rules, + * and doesn't wait for two vsync pulses before + * ack'ing the frame load with an IRQ. the result + * is that the display shows the *previously* + * loaded frame. we can detect this by looking at + * the time between asserting DCONLOAD and the IRQ -- + * if it's less than 20msec, then the DCON couldn't + * have seen two VSYNC pulses. in that case we + * deassert and reassert, and hope for the best. + * see http://dev.laptop.org/ticket/9664 + */ + delta_t = ktime_sub(dcon->irq_time, dcon->load_time); + if (dcon->switched && ktime_to_ns(delta_t) + < NSEC_PER_MSEC * 20) { + pr_err("missed loading, retrying\n"); + pdata->set_dconload(1); + mdelay(41); + pdata->set_dconload(0); + dcon->load_time = ktime_get(); + mdelay(41); + } + } + + dcon_blank_fb(dcon, true); + pr_info("The DCON has control\n"); + break; + } + default: + BUG(); + } + + dcon->curr_src = source; +} + +static void dcon_set_source(struct dcon_priv *dcon, int arg) +{ + if (dcon->pending_src == arg) + return; + + dcon->pending_src = arg; + + if (dcon->curr_src != arg) + schedule_work(&dcon->switch_source); +} + +static void dcon_set_source_sync(struct dcon_priv *dcon, int arg) +{ + dcon_set_source(dcon, arg); + flush_scheduled_work(); +} + +static ssize_t dcon_mode_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct dcon_priv *dcon = dev_get_drvdata(dev); + + return sprintf(buf, "%4.4X\n", dcon->disp_mode); +} + +static ssize_t dcon_sleep_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct dcon_priv *dcon = dev_get_drvdata(dev); + + return sprintf(buf, "%d\n", dcon->asleep); +} + +static ssize_t dcon_freeze_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct dcon_priv *dcon = dev_get_drvdata(dev); + + return sprintf(buf, "%d\n", dcon->curr_src == DCON_SOURCE_DCON ? 1 : 0); +} + +static ssize_t dcon_mono_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct dcon_priv *dcon = dev_get_drvdata(dev); + + return sprintf(buf, "%d\n", dcon->mono); +} + +static ssize_t dcon_resumeline_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return sprintf(buf, "%d\n", resumeline); +} + +static ssize_t dcon_mono_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + unsigned long enable_mono; + int rc; + + rc = kstrtoul(buf, 10, &enable_mono); + if (rc) + return rc; + + dcon_set_mono_mode(dev_get_drvdata(dev), enable_mono ? true : false); + + return count; +} + +static ssize_t dcon_freeze_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct dcon_priv *dcon = dev_get_drvdata(dev); + unsigned long output; + int ret; + + ret = kstrtoul(buf, 10, &output); + if (ret) + return ret; + + pr_info("dcon_freeze_store: %lu\n", output); + + switch (output) { + case 0: + dcon_set_source(dcon, DCON_SOURCE_CPU); + break; + case 1: + dcon_set_source_sync(dcon, DCON_SOURCE_DCON); + break; + case 2: /* normally unused */ + dcon_set_source(dcon, DCON_SOURCE_DCON); + break; + default: + return -EINVAL; + } + + return count; +} + +static ssize_t dcon_resumeline_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + unsigned short rl; + int rc; + + rc = kstrtou16(buf, 10, &rl); + if (rc) + return rc; + + resumeline = rl; + dcon_write(dev_get_drvdata(dev), DCON_REG_SCAN_INT, resumeline); + + return count; +} + +static ssize_t dcon_sleep_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + unsigned long output; + int ret; + + ret = kstrtoul(buf, 10, &output); + if (ret) + return ret; + + dcon_sleep(dev_get_drvdata(dev), output ? true : false); + return count; +} + +static struct device_attribute dcon_device_files[] = { + __ATTR(mode, 0444, dcon_mode_show, NULL), + __ATTR(sleep, 0644, dcon_sleep_show, dcon_sleep_store), + __ATTR(freeze, 0644, dcon_freeze_show, dcon_freeze_store), + __ATTR(monochrome, 0644, dcon_mono_show, dcon_mono_store), + __ATTR(resumeline, 0644, dcon_resumeline_show, dcon_resumeline_store), +}; + +static int dcon_bl_update(struct backlight_device *dev) +{ + struct dcon_priv *dcon = bl_get_data(dev); + u8 level = dev->props.brightness & 0x0F; + + if (dev->props.power != FB_BLANK_UNBLANK) + level = 0; + + if (level != dcon->bl_val) + dcon_set_backlight(dcon, level); + + /* power down the DCON when the screen is blanked */ + if (!dcon->ignore_fb_events) + dcon_sleep(dcon, !!(dev->props.state & BL_CORE_FBBLANK)); + + return 0; +} + +static int dcon_bl_get(struct backlight_device *dev) +{ + struct dcon_priv *dcon = bl_get_data(dev); + + return dcon->bl_val; +} + +static const struct backlight_ops dcon_bl_ops = { + .update_status = dcon_bl_update, + .get_brightness = dcon_bl_get, +}; + +static struct backlight_properties dcon_bl_props = { + .max_brightness = 15, + .type = BACKLIGHT_RAW, + .power = FB_BLANK_UNBLANK, +}; + +static int dcon_reboot_notify(struct notifier_block *nb, + unsigned long foo, void *bar) +{ + struct dcon_priv *dcon = container_of(nb, struct dcon_priv, reboot_nb); + + if (!dcon || !dcon->client) + return NOTIFY_DONE; + + /* Turn off the DCON. Entirely. */ + dcon_write(dcon, DCON_REG_MODE, 0x39); + dcon_write(dcon, DCON_REG_MODE, 0x32); + return NOTIFY_DONE; +} + +static int unfreeze_on_panic(struct notifier_block *nb, + unsigned long e, void *p) +{ + pdata->set_dconload(1); + return NOTIFY_DONE; +} + +static struct notifier_block dcon_panic_nb = { + .notifier_call = unfreeze_on_panic, +}; + +static int dcon_detect(struct i2c_client *client, struct i2c_board_info *info) +{ + strlcpy(info->type, "olpc_dcon", I2C_NAME_SIZE); + + return 0; +} + +static int dcon_probe(struct i2c_client *client, const struct i2c_device_id *id) +{ + struct dcon_priv *dcon; + int rc, i, j; + + if (!pdata) + return -ENXIO; + + dcon = kzalloc(sizeof(*dcon), GFP_KERNEL); + if (!dcon) + return -ENOMEM; + + dcon->client = client; + init_waitqueue_head(&dcon->waitq); + INIT_WORK(&dcon->switch_source, dcon_source_switch); + dcon->reboot_nb.notifier_call = dcon_reboot_notify; + dcon->reboot_nb.priority = -1; + + i2c_set_clientdata(client, dcon); + + if (num_registered_fb < 1) { + dev_err(&client->dev, "DCON driver requires a registered fb\n"); + rc = -EIO; + goto einit; + } + dcon->fbinfo = registered_fb[0]; + + rc = dcon_hw_init(dcon, 1); + if (rc) + goto einit; + + /* Add the DCON device */ + + dcon_device = platform_device_alloc("dcon", -1); + + if (!dcon_device) { + pr_err("Unable to create the DCON device\n"); + rc = -ENOMEM; + goto eirq; + } + rc = platform_device_add(dcon_device); + platform_set_drvdata(dcon_device, dcon); + + if (rc) { + pr_err("Unable to add the DCON device\n"); + goto edev; + } + + for (i = 0; i < ARRAY_SIZE(dcon_device_files); i++) { + rc = device_create_file(&dcon_device->dev, + &dcon_device_files[i]); + if (rc) { + dev_err(&dcon_device->dev, "Cannot create sysfs file\n"); + goto ecreate; + } + } + + dcon->bl_val = dcon_read(dcon, DCON_REG_BRIGHT) & 0x0F; + + /* Add the backlight device for the DCON */ + dcon_bl_props.brightness = dcon->bl_val; + dcon->bl_dev = backlight_device_register("dcon-bl", &dcon_device->dev, + dcon, &dcon_bl_ops, &dcon_bl_props); + if (IS_ERR(dcon->bl_dev)) { + dev_err(&client->dev, "cannot register backlight dev (%ld)\n", + PTR_ERR(dcon->bl_dev)); + dcon->bl_dev = NULL; + } + + register_reboot_notifier(&dcon->reboot_nb); + atomic_notifier_chain_register(&panic_notifier_list, &dcon_panic_nb); + + return 0; + + ecreate: + for (j = 0; j < i; j++) + device_remove_file(&dcon_device->dev, &dcon_device_files[j]); + edev: + platform_device_unregister(dcon_device); + dcon_device = NULL; + eirq: + free_irq(DCON_IRQ, dcon); + einit: + kfree(dcon); + return rc; +} + +static int dcon_remove(struct i2c_client *client) +{ + struct dcon_priv *dcon = i2c_get_clientdata(client); + + unregister_reboot_notifier(&dcon->reboot_nb); + atomic_notifier_chain_unregister(&panic_notifier_list, &dcon_panic_nb); + + free_irq(DCON_IRQ, dcon); + + backlight_device_unregister(dcon->bl_dev); + + if (dcon_device) + platform_device_unregister(dcon_device); + cancel_work_sync(&dcon->switch_source); + + kfree(dcon); + + return 0; +} + +#ifdef CONFIG_PM +static int dcon_suspend(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct dcon_priv *dcon = i2c_get_clientdata(client); + + if (!dcon->asleep) { + /* Set up the DCON to have the source */ + dcon_set_source_sync(dcon, DCON_SOURCE_DCON); + } + + return 0; +} + +static int dcon_resume(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct dcon_priv *dcon = i2c_get_clientdata(client); + + if (!dcon->asleep) { + dcon_bus_stabilize(dcon, 0); + dcon_set_source(dcon, DCON_SOURCE_CPU); + } + + return 0; +} + +#else + +#define dcon_suspend NULL +#define dcon_resume NULL + +#endif /* CONFIG_PM */ + +irqreturn_t dcon_interrupt(int irq, void *id) +{ + struct dcon_priv *dcon = id; + u8 status; + + if (pdata->read_status(&status)) + return IRQ_NONE; + + switch (status & 3) { + case 3: + pr_debug("DCONLOAD_MISSED interrupt\n"); + break; + + case 2: /* switch to DCON mode */ + case 1: /* switch to CPU mode */ + dcon->switched = true; + dcon->irq_time = ktime_get(); + wake_up(&dcon->waitq); + break; + + case 0: + /* workaround resume case: the DCON (on 1.5) doesn't + * ever assert status 0x01 when switching to CPU mode + * during resume. this is because DCONLOAD is de-asserted + * _immediately_ upon exiting S3, so the actual release + * of the DCON happened long before this point. + * see http://dev.laptop.org/ticket/9869 + */ + if (dcon->curr_src != dcon->pending_src && !dcon->switched) { + dcon->switched = true; + dcon->irq_time = ktime_get(); + wake_up(&dcon->waitq); + pr_debug("switching w/ status 0/0\n"); + } else { + pr_debug("scanline interrupt w/CPU\n"); + } + } + + return IRQ_HANDLED; +} + +static const struct dev_pm_ops dcon_pm_ops = { + .suspend = dcon_suspend, + .resume = dcon_resume, +}; + +static const struct i2c_device_id dcon_idtable[] = { + { "olpc_dcon", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, dcon_idtable); + +static struct i2c_driver dcon_driver = { + .driver = { + .name = "olpc_dcon", + .pm = &dcon_pm_ops, + }, + .class = I2C_CLASS_DDC | I2C_CLASS_HWMON, + .id_table = dcon_idtable, + .probe = dcon_probe, + .remove = dcon_remove, + .detect = dcon_detect, + .address_list = normal_i2c, +}; + +static int __init olpc_dcon_init(void) +{ +#ifdef CONFIG_FB_OLPC_DCON_1_5 + /* XO-1.5 */ + if (olpc_board_at_least(olpc_board(0xd0))) + pdata = &dcon_pdata_xo_1_5; +#endif +#ifdef CONFIG_FB_OLPC_DCON_1 + if (!pdata) + pdata = &dcon_pdata_xo_1; +#endif + + return i2c_add_driver(&dcon_driver); +} + +static void __exit olpc_dcon_exit(void) +{ + i2c_del_driver(&dcon_driver); +} + +module_init(olpc_dcon_init); +module_exit(olpc_dcon_exit); + +MODULE_LICENSE("GPL"); diff --git a/drivers/staging/olpc_dcon/olpc_dcon.h b/drivers/staging/olpc_dcon/olpc_dcon.h new file mode 100644 index 000000000000..215e7ec4dea2 --- /dev/null +++ b/drivers/staging/olpc_dcon/olpc_dcon.h @@ -0,0 +1,111 @@ +#ifndef OLPC_DCON_H_ +#define OLPC_DCON_H_ + +#include <linux/notifier.h> +#include <linux/workqueue.h> + +/* DCON registers */ + +#define DCON_REG_ID 0 +#define DCON_REG_MODE 1 + +#define MODE_PASSTHRU (1<<0) +#define MODE_SLEEP (1<<1) +#define MODE_SLEEP_AUTO (1<<2) +#define MODE_BL_ENABLE (1<<3) +#define MODE_BLANK (1<<4) +#define MODE_CSWIZZLE (1<<5) +#define MODE_COL_AA (1<<6) +#define MODE_MONO_LUMA (1<<7) +#define MODE_SCAN_INT (1<<8) +#define MODE_CLOCKDIV (1<<9) +#define MODE_DEBUG (1<<14) +#define MODE_SELFTEST (1<<15) + +#define DCON_REG_HRES 0x2 +#define DCON_REG_HTOTAL 0x3 +#define DCON_REG_HSYNC_WIDTH 0x4 +#define DCON_REG_VRES 0x5 +#define DCON_REG_VTOTAL 0x6 +#define DCON_REG_VSYNC_WIDTH 0x7 +#define DCON_REG_TIMEOUT 0x8 +#define DCON_REG_SCAN_INT 0x9 +#define DCON_REG_BRIGHT 0xa +#define DCON_REG_MEM_OPT_A 0x41 +#define DCON_REG_MEM_OPT_B 0x42 + +/* Load Delay Locked Loop (DLL) settings for clock delay */ +#define MEM_DLL_CLOCK_DELAY (1<<0) +/* Memory controller power down function */ +#define MEM_POWER_DOWN (1<<8) +/* Memory controller software reset */ +#define MEM_SOFT_RESET (1<<0) + +/* Status values */ + +#define DCONSTAT_SCANINT 0 +#define DCONSTAT_SCANINT_DCON 1 +#define DCONSTAT_DISPLAYLOAD 2 +#define DCONSTAT_MISSED 3 + +/* Source values */ + +#define DCON_SOURCE_DCON 0 +#define DCON_SOURCE_CPU 1 + +/* Interrupt */ +#define DCON_IRQ 6 + +struct dcon_priv { + struct i2c_client *client; + struct fb_info *fbinfo; + struct backlight_device *bl_dev; + + wait_queue_head_t waitq; + struct work_struct switch_source; + struct notifier_block reboot_nb; + + /* Shadow register for the DCON_REG_MODE register */ + u8 disp_mode; + + /* The current backlight value - this saves us some smbus traffic */ + u8 bl_val; + + /* Current source, initialized at probe time */ + int curr_src; + + /* Desired source */ + int pending_src; + + /* Variables used during switches */ + bool switched; + ktime_t irq_time; + ktime_t load_time; + + /* Current output type; true == mono, false == color */ + bool mono; + bool asleep; + /* This get set while controlling fb blank state from the driver */ + bool ignore_fb_events; +}; + +struct dcon_platform_data { + int (*init)(struct dcon_priv *); + void (*bus_stabilize_wiggle)(void); + void (*set_dconload)(int); + int (*read_status)(u8 *); +}; + +#include <linux/interrupt.h> + +irqreturn_t dcon_interrupt(int irq, void *id); + +#ifdef CONFIG_FB_OLPC_DCON_1 +extern struct dcon_platform_data dcon_pdata_xo_1; +#endif + +#ifdef CONFIG_FB_OLPC_DCON_1_5 +extern struct dcon_platform_data dcon_pdata_xo_1_5; +#endif + +#endif diff --git a/drivers/staging/olpc_dcon/olpc_dcon_xo_1.c b/drivers/staging/olpc_dcon/olpc_dcon_xo_1.c new file mode 100644 index 000000000000..0c5a10c69401 --- /dev/null +++ b/drivers/staging/olpc_dcon/olpc_dcon_xo_1.c @@ -0,0 +1,205 @@ +/* + * Mainly by David Woodhouse, somewhat modified by Jordan Crouse + * + * Copyright © 2006-2007 Red Hat, Inc. + * Copyright © 2006-2007 Advanced Micro Devices, Inc. + * Copyright © 2009 VIA Technology, Inc. + * Copyright (c) 2010 Andres Salomon <dilinger@queued.net> + * + * This program is free software. You can redistribute it and/or + * modify it under the terms of version 2 of the GNU General Public + * License as published by the Free Software Foundation. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/cs5535.h> +#include <linux/gpio.h> +#include <linux/delay.h> +#include <asm/olpc.h> + +#include "olpc_dcon.h" + +static int dcon_init_xo_1(struct dcon_priv *dcon) +{ + unsigned char lob; + + if (gpio_request(OLPC_GPIO_DCON_STAT0, "OLPC-DCON")) { + pr_err("failed to request STAT0 GPIO\n"); + return -EIO; + } + if (gpio_request(OLPC_GPIO_DCON_STAT1, "OLPC-DCON")) { + pr_err("failed to request STAT1 GPIO\n"); + goto err_gp_stat1; + } + if (gpio_request(OLPC_GPIO_DCON_IRQ, "OLPC-DCON")) { + pr_err("failed to request IRQ GPIO\n"); + goto err_gp_irq; + } + if (gpio_request(OLPC_GPIO_DCON_LOAD, "OLPC-DCON")) { + pr_err("failed to request LOAD GPIO\n"); + goto err_gp_load; + } + if (gpio_request(OLPC_GPIO_DCON_BLANK, "OLPC-DCON")) { + pr_err("failed to request BLANK GPIO\n"); + goto err_gp_blank; + } + + /* Turn off the event enable for GPIO7 just to be safe */ + cs5535_gpio_clear(OLPC_GPIO_DCON_IRQ, GPIO_EVENTS_ENABLE); + + /* + * Determine the current state by reading the GPIO bit; earlier + * stages of the boot process have established the state. + * + * Note that we read GPIO_OUTPUT_VAL rather than GPIO_READ_BACK here; + * this is because OFW will disable input for the pin and set a value.. + * READ_BACK will only contain a valid value if input is enabled and + * then a value is set. So, future readings of the pin can use + * READ_BACK, but the first one cannot. Awesome, huh? + */ + dcon->curr_src = cs5535_gpio_isset(OLPC_GPIO_DCON_LOAD, GPIO_OUTPUT_VAL) + ? DCON_SOURCE_CPU + : DCON_SOURCE_DCON; + dcon->pending_src = dcon->curr_src; + + /* Set the directions for the GPIO pins */ + gpio_direction_input(OLPC_GPIO_DCON_STAT0); + gpio_direction_input(OLPC_GPIO_DCON_STAT1); + gpio_direction_input(OLPC_GPIO_DCON_IRQ); + gpio_direction_input(OLPC_GPIO_DCON_BLANK); + gpio_direction_output(OLPC_GPIO_DCON_LOAD, + dcon->curr_src == DCON_SOURCE_CPU); + + /* Set up the interrupt mappings */ + + /* Set the IRQ to pair 2 */ + cs5535_gpio_setup_event(OLPC_GPIO_DCON_IRQ, 2, 0); + + /* Enable group 2 to trigger the DCON interrupt */ + cs5535_gpio_set_irq(2, DCON_IRQ); + + /* Select edge level for interrupt (in PIC) */ + lob = inb(0x4d0); + lob &= ~(1 << DCON_IRQ); + outb(lob, 0x4d0); + + /* Register the interrupt handler */ + if (request_irq(DCON_IRQ, &dcon_interrupt, 0, "DCON", dcon)) { + pr_err("failed to request DCON's irq\n"); + goto err_req_irq; + } + + /* Clear INV_EN for GPIO7 (DCONIRQ) */ + cs5535_gpio_clear(OLPC_GPIO_DCON_IRQ, GPIO_INPUT_INVERT); + + /* Enable filter for GPIO12 (DCONBLANK) */ + cs5535_gpio_set(OLPC_GPIO_DCON_BLANK, GPIO_INPUT_FILTER); + + /* Disable filter for GPIO7 */ + cs5535_gpio_clear(OLPC_GPIO_DCON_IRQ, GPIO_INPUT_FILTER); + + /* Disable event counter for GPIO7 (DCONIRQ) and GPIO12 (DCONBLANK) */ + cs5535_gpio_clear(OLPC_GPIO_DCON_IRQ, GPIO_INPUT_EVENT_COUNT); + cs5535_gpio_clear(OLPC_GPIO_DCON_BLANK, GPIO_INPUT_EVENT_COUNT); + + /* Add GPIO12 to the Filter Event Pair #7 */ + cs5535_gpio_set(OLPC_GPIO_DCON_BLANK, GPIO_FE7_SEL); + + /* Turn off negative Edge Enable for GPIO12 */ + cs5535_gpio_clear(OLPC_GPIO_DCON_BLANK, GPIO_NEGATIVE_EDGE_EN); + + /* Enable negative Edge Enable for GPIO7 */ + cs5535_gpio_set(OLPC_GPIO_DCON_IRQ, GPIO_NEGATIVE_EDGE_EN); + + /* Zero the filter amount for Filter Event Pair #7 */ + cs5535_gpio_set(0, GPIO_FLTR7_AMOUNT); + + /* Clear the negative edge status for GPIO7 and GPIO12 */ + cs5535_gpio_set(OLPC_GPIO_DCON_IRQ, GPIO_NEGATIVE_EDGE_STS); + cs5535_gpio_set(OLPC_GPIO_DCON_BLANK, GPIO_NEGATIVE_EDGE_STS); + + /* FIXME: Clear the positive status as well, just to be sure */ + cs5535_gpio_set(OLPC_GPIO_DCON_IRQ, GPIO_POSITIVE_EDGE_STS); + cs5535_gpio_set(OLPC_GPIO_DCON_BLANK, GPIO_POSITIVE_EDGE_STS); + + /* Enable events for GPIO7 (DCONIRQ) and GPIO12 (DCONBLANK) */ + cs5535_gpio_set(OLPC_GPIO_DCON_IRQ, GPIO_EVENTS_ENABLE); + cs5535_gpio_set(OLPC_GPIO_DCON_BLANK, GPIO_EVENTS_ENABLE); + + return 0; + +err_req_irq: + gpio_free(OLPC_GPIO_DCON_BLANK); +err_gp_blank: + gpio_free(OLPC_GPIO_DCON_LOAD); +err_gp_load: + gpio_free(OLPC_GPIO_DCON_IRQ); +err_gp_irq: + gpio_free(OLPC_GPIO_DCON_STAT1); +err_gp_stat1: + gpio_free(OLPC_GPIO_DCON_STAT0); + return -EIO; +} + +static void dcon_wiggle_xo_1(void) +{ + int x; + + /* + * According to HiMax, when powering the DCON up we should hold + * SMB_DATA high for 8 SMB_CLK cycles. This will force the DCON + * state machine to reset to a (sane) initial state. Mitch Bradley + * did some testing and discovered that holding for 16 SMB_CLK cycles + * worked a lot more reliably, so that's what we do here. + * + * According to the cs5536 spec, to set GPIO14 to SMB_CLK we must + * simultaneously set AUX1 IN/OUT to GPIO14; ditto for SMB_DATA and + * GPIO15. + */ + cs5535_gpio_set(OLPC_GPIO_SMB_CLK, GPIO_OUTPUT_VAL); + cs5535_gpio_set(OLPC_GPIO_SMB_DATA, GPIO_OUTPUT_VAL); + cs5535_gpio_set(OLPC_GPIO_SMB_CLK, GPIO_OUTPUT_ENABLE); + cs5535_gpio_set(OLPC_GPIO_SMB_DATA, GPIO_OUTPUT_ENABLE); + cs5535_gpio_clear(OLPC_GPIO_SMB_CLK, GPIO_OUTPUT_AUX1); + cs5535_gpio_clear(OLPC_GPIO_SMB_DATA, GPIO_OUTPUT_AUX1); + cs5535_gpio_clear(OLPC_GPIO_SMB_CLK, GPIO_OUTPUT_AUX2); + cs5535_gpio_clear(OLPC_GPIO_SMB_DATA, GPIO_OUTPUT_AUX2); + cs5535_gpio_clear(OLPC_GPIO_SMB_CLK, GPIO_INPUT_AUX1); + cs5535_gpio_clear(OLPC_GPIO_SMB_DATA, GPIO_INPUT_AUX1); + + for (x = 0; x < 16; x++) { + udelay(5); + cs5535_gpio_clear(OLPC_GPIO_SMB_CLK, GPIO_OUTPUT_VAL); + udelay(5); + cs5535_gpio_set(OLPC_GPIO_SMB_CLK, GPIO_OUTPUT_VAL); + } + udelay(5); + cs5535_gpio_set(OLPC_GPIO_SMB_CLK, GPIO_OUTPUT_AUX1); + cs5535_gpio_set(OLPC_GPIO_SMB_DATA, GPIO_OUTPUT_AUX1); + cs5535_gpio_set(OLPC_GPIO_SMB_CLK, GPIO_INPUT_AUX1); + cs5535_gpio_set(OLPC_GPIO_SMB_DATA, GPIO_INPUT_AUX1); +} + +static void dcon_set_dconload_1(int val) +{ + gpio_set_value(OLPC_GPIO_DCON_LOAD, val); +} + +static int dcon_read_status_xo_1(u8 *status) +{ + *status = gpio_get_value(OLPC_GPIO_DCON_STAT0); + *status |= gpio_get_value(OLPC_GPIO_DCON_STAT1) << 1; + + /* Clear the negative edge status for GPIO7 */ + cs5535_gpio_set(OLPC_GPIO_DCON_IRQ, GPIO_NEGATIVE_EDGE_STS); + + return 0; +} + +struct dcon_platform_data dcon_pdata_xo_1 = { + .init = dcon_init_xo_1, + .bus_stabilize_wiggle = dcon_wiggle_xo_1, + .set_dconload = dcon_set_dconload_1, + .read_status = dcon_read_status_xo_1, +}; diff --git a/drivers/staging/olpc_dcon/olpc_dcon_xo_1_5.c b/drivers/staging/olpc_dcon/olpc_dcon_xo_1_5.c new file mode 100644 index 000000000000..6a4d379c16a3 --- /dev/null +++ b/drivers/staging/olpc_dcon/olpc_dcon_xo_1_5.c @@ -0,0 +1,161 @@ +/* + * Copyright (c) 2009,2010 One Laptop per Child + * + * This program is free software. You can redistribute it and/or + * modify it under the terms of version 2 of the GNU General Public + * License as published by the Free Software Foundation. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/acpi.h> +#include <linux/delay.h> +#include <linux/gpio.h> +#include <asm/olpc.h> + +/* TODO: this eventually belongs in linux/vx855.h */ +#define NR_VX855_GPI 14 +#define NR_VX855_GPO 13 +#define NR_VX855_GPIO 15 + +#define VX855_GPI(n) (n) +#define VX855_GPO(n) (NR_VX855_GPI + (n)) +#define VX855_GPIO(n) (NR_VX855_GPI + NR_VX855_GPO + (n)) + +#include "olpc_dcon.h" + +/* Hardware setup on the XO 1.5: + * DCONLOAD connects to VX855_GPIO1 (not SMBCK2) + * DCONBLANK connects to VX855_GPIO8 (not SSPICLK) unused in driver + * DCONSTAT0 connects to VX855_GPI10 (not SSPISDI) + * DCONSTAT1 connects to VX855_GPI11 (not nSSPISS) + * DCONIRQ connects to VX855_GPIO12 + * DCONSMBDATA connects to VX855 graphics CRTSPD + * DCONSMBCLK connects to VX855 graphics CRTSPCLK + */ + +#define VX855_GENL_PURPOSE_OUTPUT 0x44c /* PMIO_Rx4c-4f */ +#define VX855_GPI_STATUS_CHG 0x450 /* PMIO_Rx50 */ +#define VX855_GPI_SCI_SMI 0x452 /* PMIO_Rx52 */ +#define BIT_GPIO12 0x40 + +#define PREFIX "OLPC DCON:" + +static void dcon_clear_irq(void) +{ + /* irq status will appear in PMIO_Rx50[6] (RW1C) on gpio12 */ + outb(BIT_GPIO12, VX855_GPI_STATUS_CHG); +} + +static int dcon_was_irq(void) +{ + u_int8_t tmp; + + /* irq status will appear in PMIO_Rx50[6] on gpio12 */ + tmp = inb(VX855_GPI_STATUS_CHG); + return !!(tmp & BIT_GPIO12); + + return 0; +} + +static int dcon_init_xo_1_5(struct dcon_priv *dcon) +{ + unsigned int irq; + + dcon_clear_irq(); + + /* set PMIO_Rx52[6] to enable SCI/SMI on gpio12 */ + outb(inb(VX855_GPI_SCI_SMI)|BIT_GPIO12, VX855_GPI_SCI_SMI); + + /* Determine the current state of DCONLOAD, likely set by firmware */ + /* GPIO1 */ + dcon->curr_src = (inl(VX855_GENL_PURPOSE_OUTPUT) & 0x1000) ? + DCON_SOURCE_CPU : DCON_SOURCE_DCON; + dcon->pending_src = dcon->curr_src; + + /* we're sharing the IRQ with ACPI */ + irq = acpi_gbl_FADT.sci_interrupt; + if (request_irq(irq, &dcon_interrupt, IRQF_SHARED, "DCON", dcon)) { + pr_err("DCON (IRQ%d) allocation failed\n", irq); + return 1; + } + + return 0; +} + +static void set_i2c_line(int sda, int scl) +{ + unsigned char tmp; + unsigned int port = 0x26; + + /* FIXME: This directly accesses the CRT GPIO controller !!! */ + outb(port, 0x3c4); + tmp = inb(0x3c5); + + if (scl) + tmp |= 0x20; + else + tmp &= ~0x20; + + if (sda) + tmp |= 0x10; + else + tmp &= ~0x10; + + tmp |= 0x01; + + outb(port, 0x3c4); + outb(tmp, 0x3c5); +} + + +static void dcon_wiggle_xo_1_5(void) +{ + int x; + + /* + * According to HiMax, when powering the DCON up we should hold + * SMB_DATA high for 8 SMB_CLK cycles. This will force the DCON + * state machine to reset to a (sane) initial state. Mitch Bradley + * did some testing and discovered that holding for 16 SMB_CLK cycles + * worked a lot more reliably, so that's what we do here. + */ + set_i2c_line(1, 1); + + for (x = 0; x < 16; x++) { + udelay(5); + set_i2c_line(1, 0); + udelay(5); + set_i2c_line(1, 1); + } + udelay(5); + + /* set PMIO_Rx52[6] to enable SCI/SMI on gpio12 */ + outb(inb(VX855_GPI_SCI_SMI)|BIT_GPIO12, VX855_GPI_SCI_SMI); +} + +static void dcon_set_dconload_xo_1_5(int val) +{ + gpio_set_value(VX855_GPIO(1), val); +} + +static int dcon_read_status_xo_1_5(u8 *status) +{ + if (!dcon_was_irq()) + return -1; + + /* i believe this is the same as "inb(0x44b) & 3" */ + *status = gpio_get_value(VX855_GPI(10)); + *status |= gpio_get_value(VX855_GPI(11)) << 1; + + dcon_clear_irq(); + + return 0; +} + +struct dcon_platform_data dcon_pdata_xo_1_5 = { + .init = dcon_init_xo_1_5, + .bus_stabilize_wiggle = dcon_wiggle_xo_1_5, + .set_dconload = dcon_set_dconload_xo_1_5, + .read_status = dcon_read_status_xo_1_5, +}; diff --git a/drivers/staging/rdma/hfi1/Kconfig b/drivers/staging/rdma/hfi1/Kconfig index 3e668d852f03..a925fb0db706 100644 --- a/drivers/staging/rdma/hfi1/Kconfig +++ b/drivers/staging/rdma/hfi1/Kconfig @@ -2,6 +2,7 @@ config INFINIBAND_HFI1 tristate "Intel OPA Gen1 support" depends on X86_64 && INFINIBAND_RDMAVT select MMU_NOTIFIER + select CRC32 default m ---help--- This is a low-level driver for Intel OPA Gen1 adapter. |