diff options
Diffstat (limited to 'drivers')
4 files changed, 25 insertions, 7 deletions
diff --git a/drivers/net/ethernet/stmicro/stmmac/common.h b/drivers/net/ethernet/stmicro/stmmac/common.h index 9e42b5d32cff..f5dedcbf4651 100644 --- a/drivers/net/ethernet/stmicro/stmmac/common.h +++ b/drivers/net/ethernet/stmicro/stmmac/common.h @@ -147,6 +147,7 @@ struct stmmac_extra_stats { #define DMA_HW_FEAT_FLEXIPPSEN 0x04000000 /* Flexible PPS Output */ #define DMA_HW_FEAT_SAVLANINS 0x08000000 /* Source Addr or VLAN Insertion */ #define DMA_HW_FEAT_ACTPHYIF 0x70000000 /* Active/selected PHY interface */ +#define DEFAULT_DMA_PBL 8 enum rx_frame_status { /* IPC status */ good_frame = 0, diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index 9ecd6cf9815a..efc42e1f9b4a 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -919,6 +919,24 @@ static void stmmac_check_ether_addr(struct stmmac_priv *priv) priv->dev->dev_addr); } +static int stmmac_init_dma_engine(struct stmmac_priv *priv) +{ + int pbl = DEFAULT_DMA_PBL, fixed_burst = 0, burst_len = 0; + + /* Some DMA parameters can be passed from the platform; + * in case of these are not passed we keep a default + * (good for all the chips) and init the DMA! */ + if (priv->plat->dma_cfg) { + pbl = priv->plat->dma_cfg->pbl; + fixed_burst = priv->plat->dma_cfg->fixed_burst; + burst_len = priv->plat->dma_cfg->burst_len; + } + + return priv->hw->dma->init(priv->ioaddr, pbl, fixed_burst, + burst_len, priv->dma_tx_phy, + priv->dma_rx_phy); +} + /** * stmmac_open - open entry point of the driver * @dev : pointer to the device structure. @@ -967,10 +985,7 @@ static int stmmac_open(struct net_device *dev) init_dma_desc_rings(dev); /* DMA initialization and SW reset */ - ret = priv->hw->dma->init(priv->ioaddr, priv->plat->dma_cfg->pbl, - priv->plat->dma_cfg->fixed_burst, - priv->plat->dma_cfg->burst_len, - priv->dma_tx_phy, priv->dma_rx_phy); + ret = stmmac_init_dma_engine(priv); if (ret < 0) { pr_err("%s: DMA initialization failed\n", __func__); goto open_error; diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c index 65e0f98520d6..58fab5303e9c 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c @@ -28,6 +28,7 @@ struct plat_stmmacenet_data plat_dat; struct stmmac_mdio_bus_data mdio_data; +struct stmmac_dma_cfg dma_cfg; static void stmmac_default_data(void) { @@ -35,8 +36,6 @@ static void stmmac_default_data(void) plat_dat.bus_id = 1; plat_dat.phy_addr = 0; plat_dat.interface = PHY_INTERFACE_MODE_GMII; - plat_dat.dma_cfg->pbl = 32; - plat_dat.dma_cfg->burst_len = DMA_AXI_BLEN_256; plat_dat.clk_csr = 2; /* clk_csr_i = 20-35MHz & MDC = clk_csr_i/16 */ plat_dat.has_gmac = 1; plat_dat.force_sf_dma_mode = 1; @@ -45,6 +44,10 @@ static void stmmac_default_data(void) mdio_data.phy_reset = NULL; mdio_data.phy_mask = 0; plat_dat.mdio_bus_data = &mdio_data; + + dma_cfg.pbl = 32; + dma_cfg.burst_len = DMA_AXI_BLEN_256; + plat_dat.dma_cfg = &dma_cfg; } /** diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c index ba30d38a6caf..3dd8f0803808 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c @@ -50,7 +50,6 @@ static int __devinit stmmac_probe_config_dt(struct platform_device *pdev, * once needed on other platforms. */ if (of_device_is_compatible(np, "st,spear600-gmac")) { - plat->dma_cfg->pbl = 8; plat->has_gmac = 1; plat->pmt = 1; } |