diff options
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/input/touchscreen/ucb1400_ts.c | 18 |
1 files changed, 9 insertions, 9 deletions
diff --git a/drivers/input/touchscreen/ucb1400_ts.c b/drivers/input/touchscreen/ucb1400_ts.c index 4ac30ca9c3b4..36ff1549434b 100644 --- a/drivers/input/touchscreen/ucb1400_ts.c +++ b/drivers/input/touchscreen/ucb1400_ts.c @@ -35,7 +35,7 @@ static int ts_delay = 55; /* us */ static int ts_delay_pressure; /* us */ /* Switch to interrupt mode. */ -static inline void ucb1400_ts_mode_int(struct snd_ac97 *ac97) +static void ucb1400_ts_mode_int(struct snd_ac97 *ac97) { ucb1400_reg_write(ac97, UCB_TS_CR, UCB_TS_CR_TSMX_POW | UCB_TS_CR_TSPX_POW | @@ -47,7 +47,7 @@ static inline void ucb1400_ts_mode_int(struct snd_ac97 *ac97) * Switch to pressure mode, and read pressure. We don't need to wait * here, since both plates are being driven. */ -static inline unsigned int ucb1400_ts_read_pressure(struct ucb1400_ts *ucb) +static unsigned int ucb1400_ts_read_pressure(struct ucb1400_ts *ucb) { ucb1400_reg_write(ucb->ac97, UCB_TS_CR, UCB_TS_CR_TSMX_POW | UCB_TS_CR_TSPX_POW | @@ -63,7 +63,7 @@ static inline unsigned int ucb1400_ts_read_pressure(struct ucb1400_ts *ucb) * gives a faster response time. Even so, we need to wait about 55us * for things to stabilise. */ -static inline unsigned int ucb1400_ts_read_xpos(struct ucb1400_ts *ucb) +static unsigned int ucb1400_ts_read_xpos(struct ucb1400_ts *ucb) { ucb1400_reg_write(ucb->ac97, UCB_TS_CR, UCB_TS_CR_TSMX_GND | UCB_TS_CR_TSPX_POW | @@ -86,7 +86,7 @@ static inline unsigned int ucb1400_ts_read_xpos(struct ucb1400_ts *ucb) * gives a faster response time. Even so, we need to wait about 55us * for things to stabilise. */ -static inline unsigned int ucb1400_ts_read_ypos(struct ucb1400_ts *ucb) +static int ucb1400_ts_read_ypos(struct ucb1400_ts *ucb) { ucb1400_reg_write(ucb->ac97, UCB_TS_CR, UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_POW | @@ -107,7 +107,7 @@ static inline unsigned int ucb1400_ts_read_ypos(struct ucb1400_ts *ucb) * Switch to X plate resistance mode. Set MX to ground, PX to * supply. Measure current. */ -static inline unsigned int ucb1400_ts_read_xres(struct ucb1400_ts *ucb) +static unsigned int ucb1400_ts_read_xres(struct ucb1400_ts *ucb) { ucb1400_reg_write(ucb->ac97, UCB_TS_CR, UCB_TS_CR_TSMX_GND | UCB_TS_CR_TSPX_POW | @@ -119,7 +119,7 @@ static inline unsigned int ucb1400_ts_read_xres(struct ucb1400_ts *ucb) * Switch to Y plate resistance mode. Set MY to ground, PY to * supply. Measure current. */ -static inline unsigned int ucb1400_ts_read_yres(struct ucb1400_ts *ucb) +static unsigned int ucb1400_ts_read_yres(struct ucb1400_ts *ucb) { ucb1400_reg_write(ucb->ac97, UCB_TS_CR, UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_POW | @@ -127,21 +127,21 @@ static inline unsigned int ucb1400_ts_read_yres(struct ucb1400_ts *ucb) return ucb1400_adc_read(ucb->ac97, 0, adcsync); } -static inline int ucb1400_ts_pen_up(struct snd_ac97 *ac97) +static int ucb1400_ts_pen_up(struct snd_ac97 *ac97) { unsigned short val = ucb1400_reg_read(ac97, UCB_TS_CR); return val & (UCB_TS_CR_TSPX_LOW | UCB_TS_CR_TSMX_LOW); } -static inline void ucb1400_ts_irq_enable(struct snd_ac97 *ac97) +static void ucb1400_ts_irq_enable(struct snd_ac97 *ac97) { ucb1400_reg_write(ac97, UCB_IE_CLEAR, UCB_IE_TSPX); ucb1400_reg_write(ac97, UCB_IE_CLEAR, 0); ucb1400_reg_write(ac97, UCB_IE_FAL, UCB_IE_TSPX); } -static inline void ucb1400_ts_irq_disable(struct snd_ac97 *ac97) +static void ucb1400_ts_irq_disable(struct snd_ac97 *ac97) { ucb1400_reg_write(ac97, UCB_IE_FAL, 0); } |