summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/block/xen-blkfront.c5
-rw-r--r--drivers/char/random.c355
-rw-r--r--drivers/crypto/n2_core.c3
-rw-r--r--drivers/firmware/dmi_scan.c3
-rw-r--r--drivers/hv/vmbus_drv.c3
-rw-r--r--drivers/i2c/busses/i2c-pmcmsp.c3
-rw-r--r--drivers/input/serio/hp_sdc.c2
-rw-r--r--drivers/mfd/ab3100-core.c4
-rw-r--r--drivers/mfd/tps65010.c3
-rw-r--r--drivers/mfd/wm831x-otp.c8
-rw-r--r--drivers/power/pda_power.c6
-rw-r--r--drivers/rtc/rtc-wm831x.c24
-rw-r--r--drivers/tty/serial/uartlite.c3
-rw-r--r--drivers/usb/core/hub.c9
-rw-r--r--drivers/usb/gadget/goku_udc.c2
-rw-r--r--drivers/usb/gadget/pxa25x_udc.c12
-rw-r--r--drivers/usb/otg/isp1301_omap.c1
17 files changed, 287 insertions, 159 deletions
diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c
index e4fb3374dcd2..2c2d2e5c1597 100644
--- a/drivers/block/xen-blkfront.c
+++ b/drivers/block/xen-blkfront.c
@@ -888,9 +888,8 @@ static int setup_blkring(struct xenbus_device *dev,
if (err)
goto fail;
- err = bind_evtchn_to_irqhandler(info->evtchn,
- blkif_interrupt,
- IRQF_SAMPLE_RANDOM, "blkif", info);
+ err = bind_evtchn_to_irqhandler(info->evtchn, blkif_interrupt, 0,
+ "blkif", info);
if (err <= 0) {
xenbus_dev_fatal(dev, err,
"bind_evtchn_to_irqhandler failed");
diff --git a/drivers/char/random.c b/drivers/char/random.c
index 4ec04a754733..b86eae9b77df 100644
--- a/drivers/char/random.c
+++ b/drivers/char/random.c
@@ -125,21 +125,26 @@
* The current exported interfaces for gathering environmental noise
* from the devices are:
*
+ * void add_device_randomness(const void *buf, unsigned int size);
* void add_input_randomness(unsigned int type, unsigned int code,
* unsigned int value);
- * void add_interrupt_randomness(int irq);
+ * void add_interrupt_randomness(int irq, int irq_flags);
* void add_disk_randomness(struct gendisk *disk);
*
+ * add_device_randomness() is for adding data to the random pool that
+ * is likely to differ between two devices (or possibly even per boot).
+ * This would be things like MAC addresses or serial numbers, or the
+ * read-out of the RTC. This does *not* add any actual entropy to the
+ * pool, but it initializes the pool to different values for devices
+ * that might otherwise be identical and have very little entropy
+ * available to them (particularly common in the embedded world).
+ *
* add_input_randomness() uses the input layer interrupt timing, as well as
* the event type information from the hardware.
*
- * add_interrupt_randomness() uses the inter-interrupt timing as random
- * inputs to the entropy pool. Note that not all interrupts are good
- * sources of randomness! For example, the timer interrupts is not a
- * good choice, because the periodicity of the interrupts is too
- * regular, and hence predictable to an attacker. Network Interface
- * Controller interrupts are a better measure, since the timing of the
- * NIC interrupts are more unpredictable.
+ * add_interrupt_randomness() uses the interrupt timing as random
+ * inputs to the entropy pool. Using the cycle counters and the irq source
+ * as inputs, it feeds the randomness roughly once a second.
*
* add_disk_randomness() uses what amounts to the seek time of block
* layer request events, on a per-disk_devt basis, as input to the
@@ -248,6 +253,8 @@
#include <linux/percpu.h>
#include <linux/cryptohash.h>
#include <linux/fips.h>
+#include <linux/ptrace.h>
+#include <linux/kmemcheck.h>
#ifdef CONFIG_GENERIC_HARDIRQS
# include <linux/irq.h>
@@ -256,8 +263,12 @@
#include <asm/processor.h>
#include <asm/uaccess.h>
#include <asm/irq.h>
+#include <asm/irq_regs.h>
#include <asm/io.h>
+#define CREATE_TRACE_POINTS
+#include <trace/events/random.h>
+
/*
* Configuration information
*/
@@ -266,6 +277,8 @@
#define SEC_XFER_SIZE 512
#define EXTRACT_SIZE 10
+#define LONGS(x) (((x) + sizeof(unsigned long) - 1)/sizeof(unsigned long))
+
/*
* The minimum number of bits of entropy before we wake up a read on
* /dev/random. Should be enough to do a significant reseed.
@@ -420,8 +433,10 @@ struct entropy_store {
/* read-write data: */
spinlock_t lock;
unsigned add_ptr;
+ unsigned input_rotate;
int entropy_count;
- int input_rotate;
+ int entropy_total;
+ unsigned int initialized:1;
__u8 last_data[EXTRACT_SIZE];
};
@@ -454,6 +469,10 @@ static struct entropy_store nonblocking_pool = {
.pool = nonblocking_pool_data
};
+static __u32 const twist_table[8] = {
+ 0x00000000, 0x3b6e20c8, 0x76dc4190, 0x4db26158,
+ 0xedb88320, 0xd6d6a3e8, 0x9b64c2b0, 0xa00ae278 };
+
/*
* This function adds bytes into the entropy "pool". It does not
* update the entropy estimate. The caller should call
@@ -464,29 +483,24 @@ static struct entropy_store nonblocking_pool = {
* it's cheap to do so and helps slightly in the expected case where
* the entropy is concentrated in the low-order bits.
*/
-static void mix_pool_bytes_extract(struct entropy_store *r, const void *in,
- int nbytes, __u8 out[64])
+static void _mix_pool_bytes(struct entropy_store *r, const void *in,
+ int nbytes, __u8 out[64])
{
- static __u32 const twist_table[8] = {
- 0x00000000, 0x3b6e20c8, 0x76dc4190, 0x4db26158,
- 0xedb88320, 0xd6d6a3e8, 0x9b64c2b0, 0xa00ae278 };
unsigned long i, j, tap1, tap2, tap3, tap4, tap5;
int input_rotate;
int wordmask = r->poolinfo->poolwords - 1;
const char *bytes = in;
__u32 w;
- unsigned long flags;
- /* Taps are constant, so we can load them without holding r->lock. */
tap1 = r->poolinfo->tap1;
tap2 = r->poolinfo->tap2;
tap3 = r->poolinfo->tap3;
tap4 = r->poolinfo->tap4;
tap5 = r->poolinfo->tap5;
- spin_lock_irqsave(&r->lock, flags);
- input_rotate = r->input_rotate;
- i = r->add_ptr;
+ smp_rmb();
+ input_rotate = ACCESS_ONCE(r->input_rotate);
+ i = ACCESS_ONCE(r->add_ptr);
/* mix one byte at a time to simplify size handling and churn faster */
while (nbytes--) {
@@ -513,19 +527,61 @@ static void mix_pool_bytes_extract(struct entropy_store *r, const void *in,
input_rotate += i ? 7 : 14;
}
- r->input_rotate = input_rotate;
- r->add_ptr = i;
+ ACCESS_ONCE(r->input_rotate) = input_rotate;
+ ACCESS_ONCE(r->add_ptr) = i;
+ smp_wmb();
if (out)
for (j = 0; j < 16; j++)
((__u32 *)out)[j] = r->pool[(i - j) & wordmask];
+}
+
+static void __mix_pool_bytes(struct entropy_store *r, const void *in,
+ int nbytes, __u8 out[64])
+{
+ trace_mix_pool_bytes_nolock(r->name, nbytes, _RET_IP_);
+ _mix_pool_bytes(r, in, nbytes, out);
+}
+
+static void mix_pool_bytes(struct entropy_store *r, const void *in,
+ int nbytes, __u8 out[64])
+{
+ unsigned long flags;
+ trace_mix_pool_bytes(r->name, nbytes, _RET_IP_);
+ spin_lock_irqsave(&r->lock, flags);
+ _mix_pool_bytes(r, in, nbytes, out);
spin_unlock_irqrestore(&r->lock, flags);
}
-static void mix_pool_bytes(struct entropy_store *r, const void *in, int bytes)
+struct fast_pool {
+ __u32 pool[4];
+ unsigned long last;
+ unsigned short count;
+ unsigned char rotate;
+ unsigned char last_timer_intr;
+};
+
+/*
+ * This is a fast mixing routine used by the interrupt randomness
+ * collector. It's hardcoded for an 128 bit pool and assumes that any
+ * locks that might be needed are taken by the caller.
+ */
+static void fast_mix(struct fast_pool *f, const void *in, int nbytes)
{
- mix_pool_bytes_extract(r, in, bytes, NULL);
+ const char *bytes = in;
+ __u32 w;
+ unsigned i = f->count;
+ unsigned input_rotate = f->rotate;
+
+ while (nbytes--) {
+ w = rol32(*bytes++, input_rotate & 31) ^ f->pool[i & 3] ^
+ f->pool[(i + 1) & 3];
+ f->pool[i & 3] = (w >> 3) ^ twist_table[w & 7];
+ input_rotate += (i++ & 3) ? 7 : 14;
+ }
+ f->count = i;
+ f->rotate = input_rotate;
}
/*
@@ -533,30 +589,38 @@ static void mix_pool_bytes(struct entropy_store *r, const void *in, int bytes)
*/
static void credit_entropy_bits(struct entropy_store *r, int nbits)
{
- unsigned long flags;
- int entropy_count;
+ int entropy_count, orig;
if (!nbits)
return;
- spin_lock_irqsave(&r->lock, flags);
-
DEBUG_ENT("added %d entropy credits to %s\n", nbits, r->name);
- entropy_count = r->entropy_count;
+retry:
+ entropy_count = orig = ACCESS_ONCE(r->entropy_count);
entropy_count += nbits;
+
if (entropy_count < 0) {
DEBUG_ENT("negative entropy/overflow\n");
entropy_count = 0;
} else if (entropy_count > r->poolinfo->POOLBITS)
entropy_count = r->poolinfo->POOLBITS;
- r->entropy_count = entropy_count;
+ if (cmpxchg(&r->entropy_count, orig, entropy_count) != orig)
+ goto retry;
+
+ if (!r->initialized && nbits > 0) {
+ r->entropy_total += nbits;
+ if (r->entropy_total > 128)
+ r->initialized = 1;
+ }
+
+ trace_credit_entropy_bits(r->name, nbits, entropy_count,
+ r->entropy_total, _RET_IP_);
/* should we wake readers? */
if (r == &input_pool && entropy_count >= random_read_wakeup_thresh) {
wake_up_interruptible(&random_read_wait);
kill_fasync(&fasync, SIGIO, POLL_IN);
}
- spin_unlock_irqrestore(&r->lock, flags);
}
/*********************************************************************
@@ -572,42 +636,24 @@ struct timer_rand_state {
unsigned dont_count_entropy:1;
};
-#ifndef CONFIG_GENERIC_HARDIRQS
-
-static struct timer_rand_state *irq_timer_state[NR_IRQS];
-
-static struct timer_rand_state *get_timer_rand_state(unsigned int irq)
-{
- return irq_timer_state[irq];
-}
-
-static void set_timer_rand_state(unsigned int irq,
- struct timer_rand_state *state)
-{
- irq_timer_state[irq] = state;
-}
-
-#else
-
-static struct timer_rand_state *get_timer_rand_state(unsigned int irq)
-{
- struct irq_desc *desc;
-
- desc = irq_to_desc(irq);
-
- return desc->timer_rand_state;
-}
-
-static void set_timer_rand_state(unsigned int irq,
- struct timer_rand_state *state)
+/*
+ * Add device- or boot-specific data to the input and nonblocking
+ * pools to help initialize them to unique values.
+ *
+ * None of this adds any entropy, it is meant to avoid the
+ * problem of the nonblocking pool having similar initial state
+ * across largely identical devices.
+ */
+void add_device_randomness(const void *buf, unsigned int size)
{
- struct irq_desc *desc;
+ unsigned long time = get_cycles() ^ jiffies;
- desc = irq_to_desc(irq);
-
- desc->timer_rand_state = state;
+ mix_pool_bytes(&input_pool, buf, size, NULL);
+ mix_pool_bytes(&input_pool, &time, sizeof(time), NULL);
+ mix_pool_bytes(&nonblocking_pool, buf, size, NULL);
+ mix_pool_bytes(&nonblocking_pool, &time, sizeof(time), NULL);
}
-#endif
+EXPORT_SYMBOL(add_device_randomness);
static struct timer_rand_state input_timer_state;
@@ -637,13 +683,9 @@ static void add_timer_randomness(struct timer_rand_state *state, unsigned num)
goto out;
sample.jiffies = jiffies;
-
- /* Use arch random value, fall back to cycles */
- if (!arch_get_random_int(&sample.cycles))
- sample.cycles = get_cycles();
-
+ sample.cycles = get_cycles();
sample.num = num;
- mix_pool_bytes(&input_pool, &sample, sizeof(sample));
+ mix_pool_bytes(&input_pool, &sample, sizeof(sample), NULL);
/*
* Calculate number of bits of randomness we probably added.
@@ -700,17 +742,48 @@ void add_input_randomness(unsigned int type, unsigned int code,
}
EXPORT_SYMBOL_GPL(add_input_randomness);
-void add_interrupt_randomness(int irq)
+static DEFINE_PER_CPU(struct fast_pool, irq_randomness);
+
+void add_interrupt_randomness(int irq, int irq_flags)
{
- struct timer_rand_state *state;
+ struct entropy_store *r;
+ struct fast_pool *fast_pool = &__get_cpu_var(irq_randomness);
+ struct pt_regs *regs = get_irq_regs();
+ unsigned long now = jiffies;
+ __u32 input[4], cycles = get_cycles();
+
+ input[0] = cycles ^ jiffies;
+ input[1] = irq;
+ if (regs) {
+ __u64 ip = instruction_pointer(regs);
+ input[2] = ip;
+ input[3] = ip >> 32;
+ }
- state = get_timer_rand_state(irq);
+ fast_mix(fast_pool, input, sizeof(input));
- if (state == NULL)
+ if ((fast_pool->count & 1023) &&
+ !time_after(now, fast_pool->last + HZ))
return;
- DEBUG_ENT("irq event %d\n", irq);
- add_timer_randomness(state, 0x100 + irq);
+ fast_pool->last = now;
+
+ r = nonblocking_pool.initialized ? &input_pool : &nonblocking_pool;
+ __mix_pool_bytes(r, &fast_pool->pool, sizeof(fast_pool->pool), NULL);
+ /*
+ * If we don't have a valid cycle counter, and we see
+ * back-to-back timer interrupts, then skip giving credit for
+ * any entropy.
+ */
+ if (cycles == 0) {
+ if (irq_flags & __IRQF_TIMER) {
+ if (fast_pool->last_timer_intr)
+ return;
+ fast_pool->last_timer_intr = 1;
+ } else
+ fast_pool->last_timer_intr = 0;
+ }
+ credit_entropy_bits(r, 1);
}
#ifdef CONFIG_BLOCK
@@ -742,7 +815,7 @@ static ssize_t extract_entropy(struct entropy_store *r, void *buf,
*/
static void xfer_secondary_pool(struct entropy_store *r, size_t nbytes)
{
- __u32 tmp[OUTPUT_POOL_WORDS];
+ __u32 tmp[OUTPUT_POOL_WORDS];
if (r->pull && r->entropy_count < nbytes * 8 &&
r->entropy_count < r->poolinfo->POOLBITS) {
@@ -761,7 +834,7 @@ static void xfer_secondary_pool(struct entropy_store *r, size_t nbytes)
bytes = extract_entropy(r->pull, tmp, bytes,
random_read_wakeup_thresh / 8, rsvd);
- mix_pool_bytes(r, tmp, bytes);
+ mix_pool_bytes(r, tmp, bytes, NULL);
credit_entropy_bits(r, bytes*8);
}
}
@@ -820,13 +893,19 @@ static size_t account(struct entropy_store *r, size_t nbytes, int min,
static void extract_buf(struct entropy_store *r, __u8 *out)
{
int i;
- __u32 hash[5], workspace[SHA_WORKSPACE_WORDS];
+ union {
+ __u32 w[5];
+ unsigned long l[LONGS(EXTRACT_SIZE)];
+ } hash;
+ __u32 workspace[SHA_WORKSPACE_WORDS];
__u8 extract[64];
+ unsigned long flags;
/* Generate a hash across the pool, 16 words (512 bits) at a time */
- sha_init(hash);
+ sha_init(hash.w);
+ spin_lock_irqsave(&r->lock, flags);
for (i = 0; i < r->poolinfo->poolwords; i += 16)
- sha_transform(hash, (__u8 *)(r->pool + i), workspace);
+ sha_transform(hash.w, (__u8 *)(r->pool + i), workspace);
/*
* We mix the hash back into the pool to prevent backtracking
@@ -837,13 +916,14 @@ static void extract_buf(struct entropy_store *r, __u8 *out)
* brute-forcing the feedback as hard as brute-forcing the
* hash.
*/
- mix_pool_bytes_extract(r, hash, sizeof(hash), extract);
+ __mix_pool_bytes(r, hash.w, sizeof(hash.w), extract);
+ spin_unlock_irqrestore(&r->lock, flags);
/*
* To avoid duplicates, we atomically extract a portion of the
* pool while mixing, and hash one final time.
*/
- sha_transform(hash, extract, workspace);
+ sha_transform(hash.w, extract, workspace);
memset(extract, 0, sizeof(extract));
memset(workspace, 0, sizeof(workspace));
@@ -852,20 +932,32 @@ static void extract_buf(struct entropy_store *r, __u8 *out)
* pattern, we fold it in half. Thus, we always feed back
* twice as much data as we output.
*/
- hash[0] ^= hash[3];
- hash[1] ^= hash[4];
- hash[2] ^= rol32(hash[2], 16);
- memcpy(out, hash, EXTRACT_SIZE);
- memset(hash, 0, sizeof(hash));
+ hash.w[0] ^= hash.w[3];
+ hash.w[1] ^= hash.w[4];
+ hash.w[2] ^= rol32(hash.w[2], 16);
+
+ /*
+ * If we have a architectural hardware random number
+ * generator, mix that in, too.
+ */
+ for (i = 0; i < LONGS(EXTRACT_SIZE); i++) {
+ unsigned long v;
+ if (!arch_get_random_long(&v))
+ break;
+ hash.l[i] ^= v;
+ }
+
+ memcpy(out, &hash, EXTRACT_SIZE);
+ memset(&hash, 0, sizeof(hash));
}
static ssize_t extract_entropy(struct entropy_store *r, void *buf,
- size_t nbytes, int min, int reserved)
+ size_t nbytes, int min, int reserved)
{
ssize_t ret = 0, i;
__u8 tmp[EXTRACT_SIZE];
- unsigned long flags;
+ trace_extract_entropy(r->name, nbytes, r->entropy_count, _RET_IP_);
xfer_secondary_pool(r, nbytes);
nbytes = account(r, nbytes, min, reserved);
@@ -873,6 +965,8 @@ static ssize_t extract_entropy(struct entropy_store *r, void *buf,
extract_buf(r, tmp);
if (fips_enabled) {
+ unsigned long flags;
+
spin_lock_irqsave(&r->lock, flags);
if (!memcmp(tmp, r->last_data, EXTRACT_SIZE))
panic("Hardware RNG duplicated output!\n");
@@ -898,6 +992,7 @@ static ssize_t extract_entropy_user(struct entropy_store *r, void __user *buf,
ssize_t ret = 0, i;
__u8 tmp[EXTRACT_SIZE];
+ trace_extract_entropy_user(r->name, nbytes, r->entropy_count, _RET_IP_);
xfer_secondary_pool(r, nbytes);
nbytes = account(r, nbytes, 0, 0);
@@ -931,17 +1026,35 @@ static ssize_t extract_entropy_user(struct entropy_store *r, void __user *buf,
/*
* This function is the exported kernel interface. It returns some
- * number of good random numbers, suitable for seeding TCP sequence
- * numbers, etc.
+ * number of good random numbers, suitable for key generation, seeding
+ * TCP sequence numbers, etc. It does not use the hw random number
+ * generator, if available; use get_random_bytes_arch() for that.
*/
void get_random_bytes(void *buf, int nbytes)
{
+ extract_entropy(&nonblocking_pool, buf, nbytes, 0, 0);
+}
+EXPORT_SYMBOL(get_random_bytes);
+
+/*
+ * This function will use the architecture-specific hardware random
+ * number generator if it is available. The arch-specific hw RNG will
+ * almost certainly be faster than what we can do in software, but it
+ * is impossible to verify that it is implemented securely (as
+ * opposed, to, say, the AES encryption of a sequence number using a
+ * key known by the NSA). So it's useful if we need the speed, but
+ * only if we're willing to trust the hardware manufacturer not to
+ * have put in a back door.
+ */
+void get_random_bytes_arch(void *buf, int nbytes)
+{
char *p = buf;
+ trace_get_random_bytes(nbytes, _RET_IP_);
while (nbytes) {
unsigned long v;
int chunk = min(nbytes, (int)sizeof(unsigned long));
-
+
if (!arch_get_random_long(&v))
break;
@@ -950,9 +1063,11 @@ void get_random_bytes(void *buf, int nbytes)
nbytes -= chunk;
}
- extract_entropy(&nonblocking_pool, p, nbytes, 0, 0);
+ if (nbytes)
+ extract_entropy(&nonblocking_pool, p, nbytes, 0, 0);
}
-EXPORT_SYMBOL(get_random_bytes);
+EXPORT_SYMBOL(get_random_bytes_arch);
+
/*
* init_std_data - initialize pool with system data
@@ -966,23 +1081,30 @@ EXPORT_SYMBOL(get_random_bytes);
static void init_std_data(struct entropy_store *r)
{
int i;
- ktime_t now;
- unsigned long flags;
+ ktime_t now = ktime_get_real();
+ unsigned long rv;
- spin_lock_irqsave(&r->lock, flags);
r->entropy_count = 0;
- spin_unlock_irqrestore(&r->lock, flags);
-
- now = ktime_get_real();
- mix_pool_bytes(r, &now, sizeof(now));
- for (i = r->poolinfo->POOLBYTES; i > 0; i -= sizeof flags) {
- if (!arch_get_random_long(&flags))
+ r->entropy_total = 0;
+ mix_pool_bytes(r, &now, sizeof(now), NULL);
+ for (i = r->poolinfo->POOLBYTES; i > 0; i -= sizeof(rv)) {
+ if (!arch_get_random_long(&rv))
break;
- mix_pool_bytes(r, &flags, sizeof(flags));
+ mix_pool_bytes(r, &rv, sizeof(rv), NULL);
}
- mix_pool_bytes(r, utsname(), sizeof(*(utsname())));
+ mix_pool_bytes(r, utsname(), sizeof(*(utsname())), NULL);
}
+/*
+ * Note that setup_arch() may call add_device_randomness()
+ * long before we get here. This allows seeding of the pools
+ * with some platform dependent data very early in the boot
+ * process. But it limits our options here. We must use
+ * statically allocated structures that already have all
+ * initializations complete at compile time. We should also
+ * take care not to overwrite the precious per platform data
+ * we were given.
+ */
static int rand_initialize(void)
{
init_std_data(&input_pool);
@@ -992,24 +1114,6 @@ static int rand_initialize(void)
}
module_init(rand_initialize);
-void rand_initialize_irq(int irq)
-{
- struct timer_rand_state *state;
-
- state = get_timer_rand_state(irq);
-
- if (state)
- return;
-
- /*
- * If kzalloc returns null, we just won't use that entropy
- * source.
- */
- state = kzalloc(sizeof(struct timer_rand_state), GFP_KERNEL);
- if (state)
- set_timer_rand_state(irq, state);
-}
-
#ifdef CONFIG_BLOCK
void rand_initialize_disk(struct gendisk *disk)
{
@@ -1117,7 +1221,7 @@ write_pool(struct entropy_store *r, const char __user *buffer, size_t count)
count -= bytes;
p += bytes;
- mix_pool_bytes(r, buf, bytes);
+ mix_pool_bytes(r, buf, bytes, NULL);
cond_resched();
}
@@ -1279,6 +1383,7 @@ static int proc_do_uuid(ctl_table *table, int write,
}
static int sysctl_poolsize = INPUT_POOL_WORDS * 32;
+extern ctl_table random_table[];
ctl_table random_table[] = {
{
.procname = "poolsize",
@@ -1344,7 +1449,7 @@ late_initcall(random_int_secret_init);
* value is not cryptographically secure but for several uses the cost of
* depleting entropy is too high
*/
-DEFINE_PER_CPU(__u32 [MD5_DIGEST_WORDS], get_random_int_hash);
+static DEFINE_PER_CPU(__u32 [MD5_DIGEST_WORDS], get_random_int_hash);
unsigned int get_random_int(void)
{
__u32 *hash;
diff --git a/drivers/crypto/n2_core.c b/drivers/crypto/n2_core.c
index 67b97c5fd859..a8bd0310f8fe 100644
--- a/drivers/crypto/n2_core.c
+++ b/drivers/crypto/n2_core.c
@@ -1610,8 +1610,7 @@ static int spu_map_ino(struct platform_device *dev, struct spu_mdesc_info *ip,
sprintf(p->irq_name, "%s-%d", irq_name, index);
- return request_irq(p->irq, handler, IRQF_SAMPLE_RANDOM,
- p->irq_name, p);
+ return request_irq(p->irq, handler, 0, p->irq_name, p);
}
static struct kmem_cache *queue_cache[2];
diff --git a/drivers/firmware/dmi_scan.c b/drivers/firmware/dmi_scan.c
index 153980be4ee6..b298158cb922 100644
--- a/drivers/firmware/dmi_scan.c
+++ b/drivers/firmware/dmi_scan.c
@@ -6,6 +6,7 @@
#include <linux/dmi.h>
#include <linux/efi.h>
#include <linux/bootmem.h>
+#include <linux/random.h>
#include <asm/dmi.h>
/*
@@ -111,6 +112,8 @@ static int __init dmi_walk_early(void (*decode)(const struct dmi_header *,
dmi_table(buf, dmi_len, dmi_num, decode, NULL);
+ add_device_randomness(buf, dmi_len);
+
dmi_iounmap(buf, dmi_len);
return 0;
}
diff --git a/drivers/hv/vmbus_drv.c b/drivers/hv/vmbus_drv.c
index a220e5746d67..4748086eaaf2 100644
--- a/drivers/hv/vmbus_drv.c
+++ b/drivers/hv/vmbus_drv.c
@@ -545,8 +545,7 @@ static int vmbus_bus_init(int irq)
if (ret)
goto err_cleanup;
- ret = request_irq(irq, vmbus_isr, IRQF_SAMPLE_RANDOM,
- driver_name, hv_acpi_dev);
+ ret = request_irq(irq, vmbus_isr, 0, driver_name, hv_acpi_dev);
if (ret != 0) {
pr_err("Unable to request IRQ %d\n",
diff --git a/drivers/i2c/busses/i2c-pmcmsp.c b/drivers/i2c/busses/i2c-pmcmsp.c
index 07b7447ecbc9..3d71395ae1f7 100644
--- a/drivers/i2c/busses/i2c-pmcmsp.c
+++ b/drivers/i2c/busses/i2c-pmcmsp.c
@@ -306,8 +306,7 @@ static int __devinit pmcmsptwi_probe(struct platform_device *pldev)
pmcmsptwi_data.irq = platform_get_irq(pldev, 0);
if (pmcmsptwi_data.irq) {
rc = request_irq(pmcmsptwi_data.irq, &pmcmsptwi_interrupt,
- IRQF_SHARED | IRQF_SAMPLE_RANDOM,
- pldev->name, &pmcmsptwi_data);
+ IRQF_SHARED, pldev->name, &pmcmsptwi_data);
if (rc == 0) {
/*
* Enable 'DONE' interrupt only.
diff --git a/drivers/input/serio/hp_sdc.c b/drivers/input/serio/hp_sdc.c
index 09a089996ded..d7a7e54f6465 100644
--- a/drivers/input/serio/hp_sdc.c
+++ b/drivers/input/serio/hp_sdc.c
@@ -878,7 +878,7 @@ static int __init hp_sdc_init(void)
#endif
errstr = "IRQ not available for";
- if (request_irq(hp_sdc.irq, &hp_sdc_isr, IRQF_SHARED|IRQF_SAMPLE_RANDOM,
+ if (request_irq(hp_sdc.irq, &hp_sdc_isr, IRQF_SHARED,
"HP SDC", &hp_sdc))
goto err1;
diff --git a/drivers/mfd/ab3100-core.c b/drivers/mfd/ab3100-core.c
index 4276aab4f196..78fca2902c8d 100644
--- a/drivers/mfd/ab3100-core.c
+++ b/drivers/mfd/ab3100-core.c
@@ -409,8 +409,6 @@ static irqreturn_t ab3100_irq_handler(int irq, void *data)
u32 fatevent;
int err;
- add_interrupt_randomness(irq);
-
err = ab3100_get_register_page_interruptible(ab3100, AB3100_EVENTA1,
event_regs, 3);
if (err)
@@ -936,8 +934,6 @@ static int __devinit ab3100_probe(struct i2c_client *client,
IRQF_ONESHOT, "ab3100-core", ab3100);
if (err)
goto exit_no_irq;
- /* This real unpredictable IRQ is of course sampled for entropy */
- rand_initialize_irq(client->irq);
err = abx500_register_ops(&client->dev, &ab3100_ops);
if (err)
diff --git a/drivers/mfd/tps65010.c b/drivers/mfd/tps65010.c
index 93d5fdf020c7..da2691f22e11 100644
--- a/drivers/mfd/tps65010.c
+++ b/drivers/mfd/tps65010.c
@@ -563,8 +563,7 @@ static int tps65010_probe(struct i2c_client *client,
*/
if (client->irq > 0) {
status = request_irq(client->irq, tps65010_irq,
- IRQF_SAMPLE_RANDOM | IRQF_TRIGGER_FALLING,
- DRIVER_NAME, tps);
+ IRQF_TRIGGER_FALLING, DRIVER_NAME, tps);
if (status < 0) {
dev_dbg(&client->dev, "can't get IRQ %d, err %d\n",
client->irq, status);
diff --git a/drivers/mfd/wm831x-otp.c b/drivers/mfd/wm831x-otp.c
index f742745ff354..b90f3e06b6c9 100644
--- a/drivers/mfd/wm831x-otp.c
+++ b/drivers/mfd/wm831x-otp.c
@@ -18,6 +18,7 @@
#include <linux/bcd.h>
#include <linux/delay.h>
#include <linux/mfd/core.h>
+#include <linux/random.h>
#include <linux/mfd/wm831x/core.h>
#include <linux/mfd/wm831x/otp.h>
@@ -66,6 +67,7 @@ static DEVICE_ATTR(unique_id, 0444, wm831x_unique_id_show, NULL);
int wm831x_otp_init(struct wm831x *wm831x)
{
+ char uuid[WM831X_UNIQUE_ID_LEN];
int ret;
ret = device_create_file(wm831x->dev, &dev_attr_unique_id);
@@ -73,6 +75,12 @@ int wm831x_otp_init(struct wm831x *wm831x)
dev_err(wm831x->dev, "Unique ID attribute not created: %d\n",
ret);
+ ret = wm831x_unique_id_read(wm831x, uuid);
+ if (ret == 0)
+ add_device_randomness(uuid, sizeof(uuid));
+ else
+ dev_err(wm831x->dev, "Failed to read UUID: %d\n", ret);
+
return ret;
}
diff --git a/drivers/power/pda_power.c b/drivers/power/pda_power.c
index 6a1ca735e935..7312f2651647 100644
--- a/drivers/power/pda_power.c
+++ b/drivers/power/pda_power.c
@@ -24,11 +24,7 @@
static inline unsigned int get_irq_flags(struct resource *res)
{
- unsigned int flags = IRQF_SAMPLE_RANDOM | IRQF_SHARED;
-
- flags |= res->flags & IRQF_TRIGGER_MASK;
-
- return flags;
+ return IRQF_SHARED | (res->flags & IRQF_TRIGGER_MASK);
}
static struct device *dev;
diff --git a/drivers/rtc/rtc-wm831x.c b/drivers/rtc/rtc-wm831x.c
index 59c6245e0421..ea5c6f857ca5 100644
--- a/drivers/rtc/rtc-wm831x.c
+++ b/drivers/rtc/rtc-wm831x.c
@@ -24,7 +24,7 @@
#include <linux/mfd/wm831x/core.h>
#include <linux/delay.h>
#include <linux/platform_device.h>
-
+#include <linux/random.h>
/*
* R16416 (0x4020) - RTC Write Counter
@@ -96,6 +96,26 @@ struct wm831x_rtc {
unsigned int alarm_enabled:1;
};
+static void wm831x_rtc_add_randomness(struct wm831x *wm831x)
+{
+ int ret;
+ u16 reg;
+
+ /*
+ * The write counter contains a pseudo-random number which is
+ * regenerated every time we set the RTC so it should be a
+ * useful per-system source of entropy.
+ */
+ ret = wm831x_reg_read(wm831x, WM831X_RTC_WRITE_COUNTER);
+ if (ret >= 0) {
+ reg = ret;
+ add_device_randomness(&reg, sizeof(reg));
+ } else {
+ dev_warn(wm831x->dev, "Failed to read RTC write counter: %d\n",
+ ret);
+ }
+}
+
/*
* Read current time and date in RTC
*/
@@ -431,6 +451,8 @@ static int wm831x_rtc_probe(struct platform_device *pdev)
alm_irq, ret);
}
+ wm831x_rtc_add_randomness(wm831x);
+
return 0;
err:
diff --git a/drivers/tty/serial/uartlite.c b/drivers/tty/serial/uartlite.c
index 6cd414341d5e..6579ffdd8e9b 100644
--- a/drivers/tty/serial/uartlite.c
+++ b/drivers/tty/serial/uartlite.c
@@ -216,8 +216,7 @@ static int ulite_startup(struct uart_port *port)
{
int ret;
- ret = request_irq(port->irq, ulite_isr,
- IRQF_SHARED | IRQF_SAMPLE_RANDOM, "uartlite", port);
+ ret = request_irq(port->irq, ulite_isr, IRQF_SHARED, "uartlite", port);
if (ret)
return ret;
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 821126eb8176..128a804c42f4 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -25,6 +25,7 @@
#include <linux/kthread.h>
#include <linux/mutex.h>
#include <linux/freezer.h>
+#include <linux/random.h>
#include <asm/uaccess.h>
#include <asm/byteorder.h>
@@ -2181,6 +2182,14 @@ int usb_new_device(struct usb_device *udev)
/* Tell the world! */
announce_device(udev);
+ if (udev->serial)
+ add_device_randomness(udev->serial, strlen(udev->serial));
+ if (udev->product)
+ add_device_randomness(udev->product, strlen(udev->product));
+ if (udev->manufacturer)
+ add_device_randomness(udev->manufacturer,
+ strlen(udev->manufacturer));
+
device_enable_async_suspend(&udev->dev);
/*
diff --git a/drivers/usb/gadget/goku_udc.c b/drivers/usb/gadget/goku_udc.c
index 3d28fb976c78..9fd7886cfa9a 100644
--- a/drivers/usb/gadget/goku_udc.c
+++ b/drivers/usb/gadget/goku_udc.c
@@ -1836,7 +1836,7 @@ static int goku_probe(struct pci_dev *pdev, const struct pci_device_id *id)
/* init to known state, then setup irqs */
udc_reset(dev);
udc_reinit (dev);
- if (request_irq(pdev->irq, goku_irq, IRQF_SHARED/*|IRQF_SAMPLE_RANDOM*/,
+ if (request_irq(pdev->irq, goku_irq, IRQF_SHARED,
driver_name, dev) != 0) {
DBG(dev, "request interrupt %d failed\n", pdev->irq);
retval = -EBUSY;
diff --git a/drivers/usb/gadget/pxa25x_udc.c b/drivers/usb/gadget/pxa25x_udc.c
index 53c093b941e5..907ad3ecb341 100644
--- a/drivers/usb/gadget/pxa25x_udc.c
+++ b/drivers/usb/gadget/pxa25x_udc.c
@@ -2201,19 +2201,15 @@ static int __init pxa25x_udc_probe(struct platform_device *pdev)
#ifdef CONFIG_ARCH_LUBBOCK
if (machine_is_lubbock()) {
- retval = request_irq(LUBBOCK_USB_DISC_IRQ,
- lubbock_vbus_irq,
- IRQF_SAMPLE_RANDOM,
- driver_name, dev);
+ retval = request_irq(LUBBOCK_USB_DISC_IRQ, lubbock_vbus_irq,
+ 0, driver_name, dev);
if (retval != 0) {
pr_err("%s: can't get irq %i, err %d\n",
driver_name, LUBBOCK_USB_DISC_IRQ, retval);
goto err_irq_lub;
}
- retval = request_irq(LUBBOCK_USB_IRQ,
- lubbock_vbus_irq,
- IRQF_SAMPLE_RANDOM,
- driver_name, dev);
+ retval = request_irq(LUBBOCK_USB_IRQ, lubbock_vbus_irq,
+ 0, driver_name, dev);
if (retval != 0) {
pr_err("%s: can't get irq %i, err %d\n",
driver_name, LUBBOCK_USB_IRQ, retval);
diff --git a/drivers/usb/otg/isp1301_omap.c b/drivers/usb/otg/isp1301_omap.c
index 575fc815c932..7a88667742b6 100644
--- a/drivers/usb/otg/isp1301_omap.c
+++ b/drivers/usb/otg/isp1301_omap.c
@@ -1576,7 +1576,6 @@ isp1301_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
isp->irq_type = IRQF_TRIGGER_FALLING;
}
- isp->irq_type |= IRQF_SAMPLE_RANDOM;
status = request_irq(i2c->irq, isp1301_irq,
isp->irq_type, DRIVER_NAME, isp);
if (status < 0) {
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-16 21:47:40 +0300