1 files changed, 120 insertions, 221 deletions

diff --git a/drivers/watchdog/w83627hf_wdt.c b/drivers/watchdog/w83627hf_wdt.c
index 92f1326f0cfc..e24b21082874 100644
--- a/drivers/watchdog/w83627hf_wdt.c
+++ b/drivers/watchdog/w83627hf_wdt.c
@@ -1,6 +1,9 @@
 /*
  *	w83627hf/thf WDT driver
  *
+ *	(c) Copyright 2013 Guenter Roeck
+ *		converted to watchdog infrastructure
+ *
  *	(c) Copyright 2007 Vlad Drukker <vlad@storewiz.com>
  *		added support for W83627THF.
  *
@@ -31,31 +34,22 @@
 #include <linux/module.h>
 #include <linux/moduleparam.h>
 #include <linux/types.h>
-#include <linux/miscdevice.h>
 #include <linux/watchdog.h>
-#include <linux/fs.h>
 #include <linux/ioport.h>
 #include <linux/notifier.h>
 #include <linux/reboot.h>
 #include <linux/init.h>
-#include <linux/spinlock.h>
 #include <linux/io.h>
-#include <linux/uaccess.h>
-
 
 #define WATCHDOG_NAME "w83627hf/thf/hg/dhg WDT"
 #define WATCHDOG_TIMEOUT 60		/* 60 sec default timeout */
 
-static unsigned long wdt_is_open;
-static char expect_close;
-static DEFINE_SPINLOCK(io_lock);
-
 /* You must set this - there is no sane way to probe for this board. */
 static int wdt_io = 0x2E;
 module_param(wdt_io, int, 0);
 MODULE_PARM_DESC(wdt_io, "w83627hf/thf WDT io port (default 0x2E)");
 
-static int timeout = WATCHDOG_TIMEOUT;	/* in seconds */
+static int timeout;			/* in seconds */
 module_param(timeout, int, 0);
 MODULE_PARM_DESC(timeout,
 		"Watchdog timeout in seconds. 1 <= timeout <= 255, default="
@@ -76,236 +70,147 @@ MODULE_PARM_DESC(nowayout,
 							(same as EFER) */
 #define WDT_EFDR (WDT_EFIR+1) /* Extended Function Data Register */
 
-static void w83627hf_select_wd_register(void)
+#define W83627HF_LD_WDT		0x08
+
+static void superio_outb(int reg, int val)
 {
-	unsigned char c;
+	outb(reg, WDT_EFER);
+	outb(val, WDT_EFDR);
+}
+
+static inline int superio_inb(int reg)
+{
+	outb(reg, WDT_EFER);
+	return inb(WDT_EFDR);
+}
+
+static int superio_enter(void)
+{
+	if (!request_muxed_region(wdt_io, 2, WATCHDOG_NAME))
+		return -EBUSY;
+
 	outb_p(0x87, WDT_EFER); /* Enter extended function mode */
 	outb_p(0x87, WDT_EFER); /* Again according to manual */
 
-	outb(0x20, WDT_EFER);	/* check chip version	*/
-	c = inb(WDT_EFDR);
-	if (c == 0x82) {	/* W83627THF		*/
-		outb_p(0x2b, WDT_EFER); /* select GPIO3 */
-		c = ((inb_p(WDT_EFDR) & 0xf7) | 0x04); /* select WDT0 */
-		outb_p(0x2b, WDT_EFER);
-		outb_p(c, WDT_EFDR);	/* set GPIO3 to WDT0 */
-	} else if (c == 0x88 || c == 0xa0) {	/* W83627EHF / W83627DHG */
-		outb_p(0x2d, WDT_EFER); /* select GPIO5 */
-		c = inb_p(WDT_EFDR) & ~0x01; /* PIN77 -> WDT0# */
-		outb_p(0x2d, WDT_EFER);
-		outb_p(c, WDT_EFDR); /* set GPIO5 to WDT0 */
-	}
+	return 0;
+}
 
-	outb_p(0x07, WDT_EFER); /* point to logical device number reg */
-	outb_p(0x08, WDT_EFDR); /* select logical device 8 (GPIO2) */
-	outb_p(0x30, WDT_EFER); /* select CR30 */
-	outb_p(0x01, WDT_EFDR); /* set bit 0 to activate GPIO2 */
+static void superio_select(int ld)
+{
+	superio_outb(0x07, ld);
 }
 
-static void w83627hf_unselect_wd_register(void)
+static void superio_exit(void)
 {
 	outb_p(0xAA, WDT_EFER); /* Leave extended function mode */
+	release_region(wdt_io, 2);
 }
 
 /* tyan motherboards seem to set F5 to 0x4C ?
  * So explicitly init to appropriate value. */
 
-static void w83627hf_init(void)
+static int w83627hf_init(struct watchdog_device *wdog)
 {
+	int ret;
 	unsigned char t;
 
-	w83627hf_select_wd_register();
+	ret = superio_enter();
+	if (ret)
+		return ret;
+
+	superio_select(W83627HF_LD_WDT);
+	t = superio_inb(0x20);	/* check chip version	*/
+	if (t == 0x82) {	/* W83627THF		*/
+		t = (superio_inb(0x2b) & 0xf7);
+		superio_outb(0x2b, t | 0x04); /* set GPIO3 to WDT0 */
+	} else if (t == 0x88 || t == 0xa0) {	/* W83627EHF / W83627DHG */
+		t = superio_inb(0x2d);
+		superio_outb(0x2d, t & ~0x01);	/* set GPIO5 to WDT0 */
+	}
+
+	/* set CR30 bit 0 to activate GPIO2 */
+	t = superio_inb(0x30);
+	if (!(t & 0x01))
+		superio_outb(0x30, t | 0x01);
 
-	outb_p(0xF6, WDT_EFER); /* Select CRF6 */
-	t = inb_p(WDT_EFDR);      /* read CRF6 */
+	t = superio_inb(0xF6);
 	if (t != 0) {
 		pr_info("Watchdog already running. Resetting timeout to %d sec\n",
-			timeout);
-		outb_p(timeout, WDT_EFDR);    /* Write back to CRF6 */
+			wdog->timeout);
+		superio_outb(0xF6, wdog->timeout);
 	}
 
-	outb_p(0xF5, WDT_EFER); /* Select CRF5 */
-	t = inb_p(WDT_EFDR);      /* read CRF5 */
-	t &= ~0x0C;               /* set second mode & disable keyboard
-				    turning off watchdog */
-	t |= 0x02;		  /* enable the WDTO# output low pulse
-				    to the KBRST# pin (PIN60) */
-	outb_p(t, WDT_EFDR);    /* Write back to CRF5 */
-
-	outb_p(0xF7, WDT_EFER); /* Select CRF7 */
-	t = inb_p(WDT_EFDR);      /* read CRF7 */
-	t &= ~0xC0;               /* disable keyboard & mouse turning off
-				    watchdog */
-	outb_p(t, WDT_EFDR);    /* Write back to CRF7 */
-
-	w83627hf_unselect_wd_register();
-}
-
-static void wdt_set_time(int timeout)
-{
-	spin_lock(&io_lock);
-
-	w83627hf_select_wd_register();
+	/* set second mode & disable keyboard turning off watchdog */
+	t = superio_inb(0xF5) & ~0x0C;
+	/* enable the WDTO# output low pulse to the KBRST# pin */
+	t |= 0x02;
+	superio_outb(0xF5, t);
 
-	outb_p(0xF6, WDT_EFER);    /* Select CRF6 */
-	outb_p(timeout, WDT_EFDR); /* Write Timeout counter to CRF6 */
+	/* disable keyboard & mouse turning off watchdog */
+	t = superio_inb(0xF7) & ~0xC0;
+	superio_outb(0xF7, t);
 
-	w83627hf_unselect_wd_register();
+	superio_exit();
 
-	spin_unlock(&io_lock);
-}
-
-static int wdt_ping(void)
-{
-	wdt_set_time(timeout);
 	return 0;
 }
 
-static int wdt_disable(void)
+static int wdt_set_time(unsigned int timeout)
 {
-	wdt_set_time(0);
-	return 0;
-}
+	int ret;
+
+	ret = superio_enter();
+	if (ret)
+		return ret;
+
+	superio_select(W83627HF_LD_WDT);
+	superio_outb(0xF6, timeout);
+	superio_exit();
 
-static int wdt_set_heartbeat(int t)
-{
-	if (t < 1 || t > 255)
-		return -EINVAL;
-	timeout = t;
 	return 0;
 }
 
-static int wdt_get_time(void)
+static int wdt_start(struct watchdog_device *wdog)
 {
-	int timeleft;
-
-	spin_lock(&io_lock);
-
-	w83627hf_select_wd_register();
-
-	outb_p(0xF6, WDT_EFER);    /* Select CRF6 */
-	timeleft = inb_p(WDT_EFDR); /* Read Timeout counter to CRF6 */
-
-	w83627hf_unselect_wd_register();
-
-	spin_unlock(&io_lock);
-
-	return timeleft;
+	return wdt_set_time(wdog->timeout);
 }
 
-static ssize_t wdt_write(struct file *file, const char __user *buf,
-						size_t count, loff_t *ppos)
+static int wdt_stop(struct watchdog_device *wdog)
 {
-	if (count) {
-		if (!nowayout) {
-			size_t i;
-
-			expect_close = 0;
-
-			for (i = 0; i != count; i++) {
-				char c;
-				if (get_user(c, buf + i))
-					return -EFAULT;
-				if (c == 'V')
-					expect_close = 42;
-			}
-		}
-		wdt_ping();
-	}
-	return count;
+	return wdt_set_time(0);
 }
 
-static long wdt_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
+static int wdt_set_timeout(struct watchdog_device *wdog, unsigned int timeout)
 {
-	void __user *argp = (void __user *)arg;
-	int __user *p = argp;
-	int timeval;
-	static const struct watchdog_info ident = {
-		.options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT |
-							WDIOF_MAGICCLOSE,
-		.firmware_version = 1,
-		.identity = "W83627HF WDT",
-	};
-
-	switch (cmd) {
-	case WDIOC_GETSUPPORT:
-		if (copy_to_user(argp, &ident, sizeof(ident)))
-			return -EFAULT;
-		break;
-	case WDIOC_GETSTATUS:
-	case WDIOC_GETBOOTSTATUS:
-		return put_user(0, p);
-	case WDIOC_SETOPTIONS:
-	{
-		int options, retval = -EINVAL;
-
-		if (get_user(options, p))
-			return -EFAULT;
-		if (options & WDIOS_DISABLECARD) {
-			wdt_disable();
-			retval = 0;
-		}
-		if (options & WDIOS_ENABLECARD) {
-			wdt_ping();
-			retval = 0;
-		}
-		return retval;
-	}
-	case WDIOC_KEEPALIVE:
-		wdt_ping();
-		break;
-	case WDIOC_SETTIMEOUT:
-		if (get_user(timeval, p))
-			return -EFAULT;
-		if (wdt_set_heartbeat(timeval))
-			return -EINVAL;
-		wdt_ping();
-		/* Fall */
-	case WDIOC_GETTIMEOUT:
-		return put_user(timeout, p);
-	case WDIOC_GETTIMELEFT:
-		timeval = wdt_get_time();
-		return put_user(timeval, p);
-	default:
-		return -ENOTTY;
-	}
+	wdog->timeout = timeout;
+
 	return 0;
 }
 
-static int wdt_open(struct inode *inode, struct file *file)
+static unsigned int wdt_get_time(struct watchdog_device *wdog)
 {
-	if (test_and_set_bit(0, &wdt_is_open))
-		return -EBUSY;
-	/*
-	 *	Activate
-	 */
+	unsigned int timeleft;
+	int ret;
 
-	wdt_ping();
-	return nonseekable_open(inode, file);
-}
+	ret = superio_enter();
+	if (ret)
+		return 0;
 
-static int wdt_close(struct inode *inode, struct file *file)
-{
-	if (expect_close == 42)
-		wdt_disable();
-	else {
-		pr_crit("Unexpected close, not stopping watchdog!\n");
-		wdt_ping();
-	}
-	expect_close = 0;
-	clear_bit(0, &wdt_is_open);
-	return 0;
+	superio_select(W83627HF_LD_WDT);
+	timeleft = superio_inb(0xF6);
+	superio_exit();
+
+	return timeleft;
 }
 
 /*
  *	Notifier for system down
  */
-
 static int wdt_notify_sys(struct notifier_block *this, unsigned long code,
 	void *unused)
 {
 	if (code == SYS_DOWN || code == SYS_HALT)
-		wdt_disable();	/* Turn the WDT off */
+		wdt_set_time(0);	/* Turn the WDT off */
 
 	return NOTIFY_DONE;
 }
@@ -314,19 +219,25 @@ static int wdt_notify_sys(struct notifier_block *this, unsigned long code,
  *	Kernel Interfaces
  */
 
-static const struct file_operations wdt_fops = {
-	.owner		= THIS_MODULE,
-	.llseek		= no_llseek,
-	.write		= wdt_write,
-	.unlocked_ioctl	= wdt_ioctl,
-	.open		= wdt_open,
-	.release	= wdt_close,
+static struct watchdog_info wdt_info = {
+	.options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
+	.identity = "W83627HF Watchdog",
 };
 
-static struct miscdevice wdt_miscdev = {
-	.minor = WATCHDOG_MINOR,
-	.name = "watchdog",
-	.fops = &wdt_fops,
+static struct watchdog_ops wdt_ops = {
+	.owner = THIS_MODULE,
+	.start = wdt_start,
+	.stop = wdt_stop,
+	.set_timeout = wdt_set_timeout,
+	.get_timeleft = wdt_get_time,
+};
+
+static struct watchdog_device wdt_dev = {
+	.info = &wdt_info,
+	.ops = &wdt_ops,
+	.timeout = WATCHDOG_TIMEOUT,
+	.min_timeout = 1,
+	.max_timeout = 255,
 };
 
 /*
@@ -344,50 +255,39 @@ static int __init wdt_init(void)
 
 	pr_info("WDT driver for the Winbond(TM) W83627HF/THF/HG/DHG Super I/O chip initialising\n");
 
-	if (wdt_set_heartbeat(timeout)) {
-		wdt_set_heartbeat(WATCHDOG_TIMEOUT);
-		pr_info("timeout value must be 1 <= timeout <= 255, using %d\n",
-			WATCHDOG_TIMEOUT);
-	}
+	watchdog_init_timeout(&wdt_dev, timeout, NULL);
+	watchdog_set_nowayout(&wdt_dev, nowayout);
 
-	if (!request_region(wdt_io, 1, WATCHDOG_NAME)) {
-		pr_err("I/O address 0x%04x already in use\n", wdt_io);
-		ret = -EIO;
-		goto out;
+	ret = w83627hf_init(&wdt_dev);
+	if (ret) {
+		pr_err("failed to initialize watchdog (err=%d)\n", ret);
+		return ret;
 	}
 
-	w83627hf_init();
-
 	ret = register_reboot_notifier(&wdt_notifier);
 	if (ret != 0) {
 		pr_err("cannot register reboot notifier (err=%d)\n", ret);
-		goto unreg_regions;
+		return ret;
 	}
 
-	ret = misc_register(&wdt_miscdev);
-	if (ret != 0) {
-		pr_err("cannot register miscdev on minor=%d (err=%d)\n",
-		       WATCHDOG_MINOR, ret);
+	ret = watchdog_register_device(&wdt_dev);
+	if (ret)
 		goto unreg_reboot;
-	}
 
 	pr_info("initialized. timeout=%d sec (nowayout=%d)\n",
-		timeout, nowayout);
+		wdt_dev.timeout, nowayout);
 
-out:
 	return ret;
+
 unreg_reboot:
 	unregister_reboot_notifier(&wdt_notifier);
-unreg_regions:
-	release_region(wdt_io, 1);
-	goto out;
+	return ret;
 }
 
 static void __exit wdt_exit(void)
 {
-	misc_deregister(&wdt_miscdev);
+	watchdog_unregister_device(&wdt_dev);
 	unregister_reboot_notifier(&wdt_notifier);
-	release_region(wdt_io, 1);
 }
 
 module_init(wdt_init);
@@ -396,4 +296,3 @@ module_exit(wdt_exit);
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Pádraig  Brady <P@draigBrady.com>");
 MODULE_DESCRIPTION("w83627hf/thf WDT driver");
-MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);