summaryrefslogtreecommitdiff
path: root/drivers/usb
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb')
-rw-r--r--drivers/usb/host/xhci-hub.c134
1 files changed, 114 insertions, 20 deletions
diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index ee4af076a8fe..191ebc54cc7d 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -28,33 +28,15 @@
#define PORT_RWC_BITS (PORT_CSC | PORT_PEC | PORT_WRC | PORT_OCC | \
PORT_RC | PORT_PLC | PORT_PE)
-static void xhci_hub_descriptor(struct usb_hcd *hcd, struct xhci_hcd *xhci,
- struct usb_hub_descriptor *desc)
+static void xhci_common_hub_descriptor(struct xhci_hcd *xhci,
+ struct usb_hub_descriptor *desc, int ports)
{
- int ports;
u16 temp;
- if (hcd->speed == HCD_USB3)
- ports = xhci->num_usb3_ports;
- else
- ports = xhci->num_usb2_ports;
-
- /* FIXME: return a USB 3.0 hub descriptor if this request was for the
- * USB3 roothub.
- */
-
- /* USB 3.0 hubs have a different descriptor, but we fake this for now */
- desc->bDescriptorType = 0x29;
desc->bPwrOn2PwrGood = 10; /* xhci section 5.4.9 says 20ms max */
desc->bHubContrCurrent = 0;
desc->bNbrPorts = ports;
- temp = 1 + (ports / 8);
- desc->bDescLength = 7 + 2 * temp;
-
- memset(&desc->u.hs.DeviceRemovable[0], 0, temp);
- memset(&desc->u.hs.DeviceRemovable[temp], 0xff, temp);
-
/* Ugh, these should be #defines, FIXME */
/* Using table 11-13 in USB 2.0 spec. */
temp = 0;
@@ -71,6 +53,102 @@ static void xhci_hub_descriptor(struct usb_hcd *hcd, struct xhci_hcd *xhci,
desc->wHubCharacteristics = (__force __u16) cpu_to_le16(temp);
}
+/* Fill in the USB 2.0 roothub descriptor */
+static void xhci_usb2_hub_descriptor(struct usb_hcd *hcd, struct xhci_hcd *xhci,
+ struct usb_hub_descriptor *desc)
+{
+ int ports;
+ u16 temp;
+ __u8 port_removable[(USB_MAXCHILDREN + 1 + 7) / 8];
+ u32 portsc;
+ unsigned int i;
+
+ ports = xhci->num_usb2_ports;
+
+ xhci_common_hub_descriptor(xhci, desc, ports);
+ desc->bDescriptorType = 0x29;
+ temp = 1 + (ports / 8);
+ desc->bDescLength = 7 + 2 * temp;
+
+ /* The Device Removable bits are reported on a byte granularity.
+ * If the port doesn't exist within that byte, the bit is set to 0.
+ */
+ memset(port_removable, 0, sizeof(port_removable));
+ for (i = 0; i < ports; i++) {
+ portsc = xhci_readl(xhci, xhci->usb3_ports[i]);
+ /* If a device is removable, PORTSC reports a 0, same as in the
+ * hub descriptor DeviceRemovable bits.
+ */
+ if (portsc & PORT_DEV_REMOVE)
+ /* This math is hairy because bit 0 of DeviceRemovable
+ * is reserved, and bit 1 is for port 1, etc.
+ */
+ port_removable[(i + 1) / 8] |= 1 << ((i + 1) % 8);
+ }
+
+ /* ch11.h defines a hub descriptor that has room for USB_MAXCHILDREN
+ * ports on it. The USB 2.0 specification says that there are two
+ * variable length fields at the end of the hub descriptor:
+ * DeviceRemovable and PortPwrCtrlMask. But since we can have less than
+ * USB_MAXCHILDREN ports, we may need to use the DeviceRemovable array
+ * to set PortPwrCtrlMask bits. PortPwrCtrlMask must always be set to
+ * 0xFF, so we initialize the both arrays (DeviceRemovable and
+ * PortPwrCtrlMask) to 0xFF. Then we set the DeviceRemovable for each
+ * set of ports that actually exist.
+ */
+ memset(desc->u.hs.DeviceRemovable, 0xff,
+ sizeof(desc->u.hs.DeviceRemovable));
+ memset(desc->u.hs.PortPwrCtrlMask, 0xff,
+ sizeof(desc->u.hs.PortPwrCtrlMask));
+
+ for (i = 0; i < (ports + 1 + 7) / 8; i++)
+ memset(&desc->u.hs.DeviceRemovable[i], port_removable[i],
+ sizeof(__u8));
+}
+
+/* Fill in the USB 3.0 roothub descriptor */
+static void xhci_usb3_hub_descriptor(struct usb_hcd *hcd, struct xhci_hcd *xhci,
+ struct usb_hub_descriptor *desc)
+{
+ int ports;
+ u16 port_removable;
+ u32 portsc;
+ unsigned int i;
+
+ ports = xhci->num_usb3_ports;
+ xhci_common_hub_descriptor(xhci, desc, ports);
+ desc->bDescriptorType = 0x2a;
+ desc->bDescLength = 12;
+
+ /* header decode latency should be zero for roothubs,
+ * see section 4.23.5.2.
+ */
+ desc->u.ss.bHubHdrDecLat = 0;
+ desc->u.ss.wHubDelay = 0;
+
+ port_removable = 0;
+ /* bit 0 is reserved, bit 1 is for port 1, etc. */
+ for (i = 0; i < ports; i++) {
+ portsc = xhci_readl(xhci, xhci->usb3_ports[i]);
+ if (portsc & PORT_DEV_REMOVE)
+ port_removable |= 1 << (i + 1);
+ }
+ memset(&desc->u.ss.DeviceRemovable,
+ (__force __u16) cpu_to_le16(port_removable),
+ sizeof(__u16));
+}
+
+static void xhci_hub_descriptor(struct usb_hcd *hcd, struct xhci_hcd *xhci,
+ struct usb_hub_descriptor *desc)
+{
+
+ if (hcd->speed == HCD_USB3)
+ xhci_usb3_hub_descriptor(hcd, xhci, desc);
+ else
+ xhci_usb2_hub_descriptor(hcd, xhci, desc);
+
+}
+
static unsigned int xhci_port_speed(unsigned int port_status)
{
if (DEV_LOWSPEED(port_status))
@@ -320,6 +398,17 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
memset(buf, 0, 4);
break;
case GetHubDescriptor:
+ /* Check to make sure userspace is asking for the USB 3.0 hub
+ * descriptor for the USB 3.0 roothub. If not, we stall the
+ * endpoint, like external hubs do.
+ */
+ if (hcd->speed == HCD_USB3 &&
+ (wLength < USB_DT_SS_HUB_SIZE ||
+ wValue != (USB_DT_SS_HUB << 8))) {
+ xhci_dbg(xhci, "Wrong hub descriptor type for "
+ "USB 3.0 roothub.\n");
+ goto error;
+ }
xhci_hub_descriptor(hcd, xhci,
(struct usb_hub_descriptor *) buf);
break;
@@ -331,6 +420,9 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
temp = xhci_readl(xhci, port_array[wIndex]);
xhci_dbg(xhci, "get port status, actual port %d status = 0x%x\n", wIndex, temp);
+ /* FIXME - should we return a port status value like the USB
+ * 3.0 external hubs do?
+ */
/* wPortChange bits */
if (temp & PORT_CSC)
status |= USB_PORT_STAT_C_CONNECTION << 16;
@@ -401,6 +493,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
wIndex--;
temp = xhci_readl(xhci, port_array[wIndex]);
temp = xhci_port_state_to_neutral(temp);
+ /* FIXME: What new port features do we need to support? */
switch (wValue) {
case USB_PORT_FEAT_SUSPEND:
temp = xhci_readl(xhci, port_array[wIndex]);
@@ -469,6 +562,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
goto error;
wIndex--;
temp = xhci_readl(xhci, port_array[wIndex]);
+ /* FIXME: What new port features do we need to support? */
temp = xhci_port_state_to_neutral(temp);
switch (wValue) {
case USB_PORT_FEAT_SUSPEND:
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-17 06:00:54 +0300