diff options
Diffstat (limited to 'drivers/usb')
| -rw-r--r-- | drivers/usb/class/cdc-wdm.c | 2 | ||||
| -rw-r--r-- | drivers/usb/host/ehci-pci.c | 2 | ||||
| -rw-r--r-- | drivers/usb/host/ehci.h | 2 | ||||
| -rw-r--r-- | drivers/usb/host/ohci-q.c | 2 | ||||
| -rw-r--r-- | drivers/usb/host/xhci.h | 2 | ||||
| -rw-r--r-- | drivers/usb/serial/cypress_m8.h | 2 | ||||
| -rw-r--r-- | drivers/usb/serial/io_edgeport.c | 2 | ||||
| -rw-r--r-- | drivers/usb/serial/kl5kusb105.c | 2 | ||||
| -rw-r--r-- | drivers/usb/serial/spcp8x5.c | 2 | ||||
| -rw-r--r-- | drivers/usb/wusbcore/wa-hc.h | 2 |
10 files changed, 9 insertions, 11 deletions
diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c index ba589d4ca8bc..8c64c018b676 100644 --- a/drivers/usb/class/cdc-wdm.c +++ b/drivers/usb/class/cdc-wdm.c @@ -506,8 +506,6 @@ static int wdm_open(struct inode *inode, struct file *file) desc = usb_get_intfdata(intf); if (test_bit(WDM_DISCONNECTING, &desc->flags)) goto out; - - ; file->private_data = desc; rv = usb_autopm_get_interface(desc->intf); diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c index c2f1b7df918c..b5b83c43898a 100644 --- a/drivers/usb/host/ehci-pci.c +++ b/drivers/usb/host/ehci-pci.c @@ -242,7 +242,7 @@ static int ehci_pci_setup(struct usb_hcd *hcd) * System suspend currently expects to be able to suspend the entire * device tree, device-at-a-time. If we failed selective suspend * reports, system suspend would fail; so the root hub code must claim - * success. That's lying to usbcore, and it matters for for runtime + * success. That's lying to usbcore, and it matters for runtime * PM scenarios with selective suspend and remote wakeup... */ if (ehci->no_selective_suspend && device_can_wakeup(&pdev->dev)) diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h index 2bfff30f4704..48b9e889a18b 100644 --- a/drivers/usb/host/ehci.h +++ b/drivers/usb/host/ehci.h @@ -37,7 +37,7 @@ typedef __u16 __bitwise __hc16; #define __hc16 __le16 #endif -/* statistics can be kept for for tuning/monitoring */ +/* statistics can be kept for tuning/monitoring */ struct ehci_stats { /* irq usage */ unsigned long normal; diff --git a/drivers/usb/host/ohci-q.c b/drivers/usb/host/ohci-q.c index c2d80f80448b..16fecb8ecc39 100644 --- a/drivers/usb/host/ohci-q.c +++ b/drivers/usb/host/ohci-q.c @@ -418,7 +418,7 @@ static struct ed *ed_get ( is_out = !(ep->desc.bEndpointAddress & USB_DIR_IN); /* FIXME usbcore changes dev->devnum before SET_ADDRESS - * suceeds ... otherwise we wouldn't need "pipe". + * succeeds ... otherwise we wouldn't need "pipe". */ info = usb_pipedevice (pipe); ed->type = usb_pipetype(pipe); diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index d31d32206ba3..ffe1625d4e1b 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1150,7 +1150,7 @@ void xhci_dbg_cmd_ptrs(struct xhci_hcd *xhci); void xhci_dbg_ring_ptrs(struct xhci_hcd *xhci, struct xhci_ring *ring); void xhci_dbg_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx, unsigned int last_ep); -/* xHCI memory managment */ +/* xHCI memory management */ void xhci_mem_cleanup(struct xhci_hcd *xhci); int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags); void xhci_free_virt_device(struct xhci_hcd *xhci, int slot_id); diff --git a/drivers/usb/serial/cypress_m8.h b/drivers/usb/serial/cypress_m8.h index e772b01ac3ac..1fd360e04065 100644 --- a/drivers/usb/serial/cypress_m8.h +++ b/drivers/usb/serial/cypress_m8.h @@ -57,7 +57,7 @@ #define UART_RI 0x10 /* ring indicator - modem - device to host */ #define UART_CD 0x40 /* carrier detect - modem - device to host */ #define CYP_ERROR 0x08 /* received from input report - device to host */ -/* Note - the below has nothing to to with the "feature report" reset */ +/* Note - the below has nothing to do with the "feature report" reset */ #define CONTROL_RESET 0x08 /* sent with output report - host to device */ /* End of RS-232 protocol definitions */ diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c index dc0f832657e6..b97960ac92f2 100644 --- a/drivers/usb/serial/io_edgeport.c +++ b/drivers/usb/serial/io_edgeport.c @@ -2540,7 +2540,7 @@ static int calc_baud_rate_divisor(int baudrate, int *divisor) /***************************************************************************** * send_cmd_write_uart_register - * this function builds up a uart register message and sends to to the device. + * this function builds up a uart register message and sends to the device. *****************************************************************************/ static int send_cmd_write_uart_register(struct edgeport_port *edge_port, __u8 regNum, __u8 regValue) diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c index a61673133d7d..f7373371b137 100644 --- a/drivers/usb/serial/kl5kusb105.c +++ b/drivers/usb/serial/kl5kusb105.c @@ -38,7 +38,7 @@ * 0.3a - implemented pools of write URBs * 0.3 - alpha version for public testing * 0.2 - TIOCMGET works, so autopilot(1) can be used! - * 0.1 - can be used to to pilot-xfer -p /dev/ttyUSB0 -l + * 0.1 - can be used to do pilot-xfer -p /dev/ttyUSB0 -l * * The driver skeleton is mainly based on mct_u232.c and various other * pieces of code shamelessly copied from the drivers/usb/serial/ directory. diff --git a/drivers/usb/serial/spcp8x5.c b/drivers/usb/serial/spcp8x5.c index 61e7c40b94fb..1e58220403d1 100644 --- a/drivers/usb/serial/spcp8x5.c +++ b/drivers/usb/serial/spcp8x5.c @@ -544,7 +544,7 @@ static void spcp8x5_set_termios(struct tty_struct *tty, } /* Set Baud Rate */ - baud = tty_get_baud_rate(tty);; + baud = tty_get_baud_rate(tty); switch (baud) { case 300: buf[0] = 0x00; break; case 600: buf[0] = 0x01; break; diff --git a/drivers/usb/wusbcore/wa-hc.h b/drivers/usb/wusbcore/wa-hc.h index 586d350cdb4d..d6bea3e0b54a 100644 --- a/drivers/usb/wusbcore/wa-hc.h +++ b/drivers/usb/wusbcore/wa-hc.h @@ -47,7 +47,7 @@ * to an endpoint on a WUSB device that is connected to a * HWA RC. * - * xfer Transfer managment -- this is all the code that gets a + * xfer Transfer management -- this is all the code that gets a * buffer and pushes it to a device (or viceversa). * * * Some day a lot of this code will be shared between this driver and |