diff options
Diffstat (limited to 'drivers/usb')
241 files changed, 15024 insertions, 4262 deletions
diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig index 48f1781352f1..4ac2750491de 100644 --- a/drivers/usb/Kconfig +++ b/drivers/usb/Kconfig @@ -12,6 +12,11 @@ menuconfig USB_SUPPORT if USB_SUPPORT +config USB_COMMON + tristate + default y + depends on USB || USB_GADGET + # Host-side USB depends on having a host controller # NOTE: dummy_hcd is always an option, but it's ignored here ... # NOTE: SL-811 option should be board-specific ... @@ -19,6 +24,7 @@ config USB_ARCH_HAS_HCD boolean default y if USB_ARCH_HAS_OHCI default y if USB_ARCH_HAS_EHCI + default y if USB_ARCH_HAS_XHCI default y if PCMCIA && !M32R # sl811_cs default y if ARM # SL-811 default y if BLACKFIN # SL-811 @@ -54,7 +60,7 @@ config USB_ARCH_HAS_OHCI # some non-PCI hcds implement EHCI config USB_ARCH_HAS_EHCI boolean - default y if PPC_83xx + default y if FSL_SOC default y if PPC_MPC512x default y if SOC_AU1200 default y if ARCH_IXP4XX @@ -69,6 +75,12 @@ config USB_ARCH_HAS_EHCI default y if ARCH_MSM default y if MICROBLAZE default y if SPARC_LEON + default y if ARCH_MMP + default PCI + +# some non-PCI HCDs implement xHCI +config USB_ARCH_HAS_XHCI + boolean default PCI # ARM SA1111 chips have a non-PCI based "OHCI-compatible" USB host interface. @@ -110,6 +122,8 @@ config USB source "drivers/usb/core/Kconfig" +source "drivers/usb/dwc3/Kconfig" + source "drivers/usb/mon/Kconfig" source "drivers/usb/wusbcore/Kconfig" diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile index 30ddf8dc4f72..75eca7645227 100644 --- a/drivers/usb/Makefile +++ b/drivers/usb/Makefile @@ -6,6 +6,8 @@ obj-$(CONFIG_USB) += core/ +obj-$(CONFIG_USB_DWC3) += dwc3/ + obj-$(CONFIG_USB_MON) += mon/ obj-$(CONFIG_PCI) += host/ @@ -51,3 +53,5 @@ obj-$(CONFIG_USB_MUSB_HDRC) += musb/ obj-$(CONFIG_USB_RENESAS_USBHS) += renesas_usbhs/ obj-$(CONFIG_USB_OTG_UTILS) += otg/ obj-$(CONFIG_USB_GADGET) += gadget/ + +obj-$(CONFIG_USB_COMMON) += usb-common.o diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index dac7676ce21b..6960715c5063 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -1058,11 +1058,11 @@ made_compressed_probe: goto alloc_fail; } - ctrlsize = le16_to_cpu(epctrl->wMaxPacketSize); - readsize = le16_to_cpu(epread->wMaxPacketSize) * + ctrlsize = usb_endpoint_maxp(epctrl); + readsize = usb_endpoint_maxp(epread) * (quirks == SINGLE_RX_URB ? 1 : 2); acm->combined_interfaces = combined_interfaces; - acm->writesize = le16_to_cpu(epwrite->wMaxPacketSize) * 20; + acm->writesize = usb_endpoint_maxp(epwrite) * 20; acm->control = control_interface; acm->data = data_interface; acm->minor = minor; @@ -1305,7 +1305,7 @@ static int acm_suspend(struct usb_interface *intf, pm_message_t message) struct acm *acm = usb_get_intfdata(intf); int cnt; - if (message.event & PM_EVENT_AUTO) { + if (PMSG_IS_AUTO(message)) { int b; spin_lock_irq(&acm->write_lock); @@ -1534,6 +1534,9 @@ static const struct usb_device_id acm_ids[] = { { NOKIA_PCSUITE_ACM_INFO(0x03cd), }, /* Nokia C7 */ { SAMSUNG_PCSUITE_ACM_INFO(0x6651), }, /* Samsung GTi8510 (INNOV8) */ + /* Support for Owen devices */ + { USB_DEVICE(0x03eb, 0x0030), }, /* Owen SI30 */ + /* NOTE: non-Nokia COMM/ACM/0xff is likely MSFT RNDIS... NOT a modem! */ /* Support Lego NXT using pbLua firmware */ diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c index 2b9ff518b509..efe684908c1f 100644 --- a/drivers/usb/class/cdc-wdm.c +++ b/drivers/usb/class/cdc-wdm.c @@ -682,7 +682,7 @@ next_desc: if (!ep || !usb_endpoint_is_int_in(ep)) goto err; - desc->wMaxPacketSize = le16_to_cpu(ep->wMaxPacketSize); + desc->wMaxPacketSize = usb_endpoint_maxp(ep); desc->bMaxPacketSize0 = udev->descriptor.bMaxPacketSize0; desc->orq = kmalloc(sizeof(struct usb_ctrlrequest), GFP_KERNEL); @@ -798,11 +798,11 @@ static int wdm_suspend(struct usb_interface *intf, pm_message_t message) dev_dbg(&desc->intf->dev, "wdm%d_suspend\n", intf->minor); /* if this is an autosuspend the caller does the locking */ - if (!(message.event & PM_EVENT_AUTO)) + if (!PMSG_IS_AUTO(message)) mutex_lock(&desc->lock); spin_lock_irq(&desc->iuspin); - if ((message.event & PM_EVENT_AUTO) && + if (PMSG_IS_AUTO(message) && (test_bit(WDM_IN_USE, &desc->flags) || test_bit(WDM_RESPONDING, &desc->flags))) { spin_unlock_irq(&desc->iuspin); @@ -815,7 +815,7 @@ static int wdm_suspend(struct usb_interface *intf, pm_message_t message) kill_urbs(desc); cancel_work_sync(&desc->rxwork); } - if (!(message.event & PM_EVENT_AUTO)) + if (!PMSG_IS_AUTO(message)) mutex_unlock(&desc->lock); return rv; diff --git a/drivers/usb/class/usbtmc.c b/drivers/usb/class/usbtmc.c index 3f94ac34dce3..12cf5e7395a8 100644 --- a/drivers/usb/class/usbtmc.c +++ b/drivers/usb/class/usbtmc.c @@ -186,8 +186,7 @@ static int usbtmc_ioctl_abort_bulk_in(struct usbtmc_device_data *data) for (n = 0; n < current_setting->desc.bNumEndpoints; n++) if (current_setting->endpoint[n].desc.bEndpointAddress == data->bulk_in) - max_size = le16_to_cpu(current_setting->endpoint[n]. - desc.wMaxPacketSize); + max_size = usb_endpoint_maxp(¤t_setting->endpoint[n].desc); if (max_size == 0) { dev_err(dev, "Couldn't get wMaxPacketSize\n"); @@ -636,7 +635,7 @@ static int usbtmc_ioctl_clear(struct usbtmc_device_data *data) for (n = 0; n < current_setting->desc.bNumEndpoints; n++) { desc = ¤t_setting->endpoint[n].desc; if (desc->bEndpointAddress == data->bulk_in) - max_size = le16_to_cpu(desc->wMaxPacketSize); + max_size = usb_endpoint_maxp(desc); } if (max_size == 0) { diff --git a/drivers/usb/core/config.c b/drivers/usb/core/config.c index 26678cadfb21..f4bdd0ce8d56 100644 --- a/drivers/usb/core/config.c +++ b/drivers/usb/core/config.c @@ -124,9 +124,9 @@ static void usb_parse_ss_endpoint_companion(struct device *ddev, int cfgno, if (usb_endpoint_xfer_isoc(&ep->desc)) max_tx = (desc->bMaxBurst + 1) * (desc->bmAttributes + 1) * - le16_to_cpu(ep->desc.wMaxPacketSize); + usb_endpoint_maxp(&ep->desc); else if (usb_endpoint_xfer_int(&ep->desc)) - max_tx = le16_to_cpu(ep->desc.wMaxPacketSize) * + max_tx = usb_endpoint_maxp(&ep->desc) * (desc->bMaxBurst + 1); else max_tx = 999999; @@ -241,7 +241,7 @@ static int usb_parse_endpoint(struct device *ddev, int cfgno, int inum, cfgno, inum, asnum, d->bEndpointAddress); endpoint->desc.bmAttributes = USB_ENDPOINT_XFER_INT; endpoint->desc.bInterval = 1; - if (le16_to_cpu(endpoint->desc.wMaxPacketSize) > 8) + if (usb_endpoint_maxp(&endpoint->desc) > 8) endpoint->desc.wMaxPacketSize = cpu_to_le16(8); } @@ -254,7 +254,7 @@ static int usb_parse_endpoint(struct device *ddev, int cfgno, int inum, && usb_endpoint_xfer_bulk(d)) { unsigned maxp; - maxp = le16_to_cpu(endpoint->desc.wMaxPacketSize) & 0x07ff; + maxp = usb_endpoint_maxp(&endpoint->desc) & 0x07ff; if (maxp != 512) dev_warn(ddev, "config %d interface %d altsetting %d " "bulk endpoint 0x%X has invalid maxpacket %d\n", @@ -755,3 +755,106 @@ err2: dev_err(ddev, "out of memory\n"); return result; } + +void usb_release_bos_descriptor(struct usb_device *dev) +{ + if (dev->bos) { + kfree(dev->bos->desc); + kfree(dev->bos); + dev->bos = NULL; + } +} + +/* Get BOS descriptor set */ +int usb_get_bos_descriptor(struct usb_device *dev) +{ + struct device *ddev = &dev->dev; + struct usb_bos_descriptor *bos; + struct usb_dev_cap_header *cap; + unsigned char *buffer; + int length, total_len, num, i; + int ret; + + bos = kzalloc(sizeof(struct usb_bos_descriptor), GFP_KERNEL); + if (!bos) + return -ENOMEM; + + /* Get BOS descriptor */ + ret = usb_get_descriptor(dev, USB_DT_BOS, 0, bos, USB_DT_BOS_SIZE); + if (ret < USB_DT_BOS_SIZE) { + dev_err(ddev, "unable to get BOS descriptor\n"); + if (ret >= 0) + ret = -ENOMSG; + kfree(bos); + return ret; + } + + length = bos->bLength; + total_len = le16_to_cpu(bos->wTotalLength); + num = bos->bNumDeviceCaps; + kfree(bos); + if (total_len < length) + return -EINVAL; + + dev->bos = kzalloc(sizeof(struct usb_host_bos), GFP_KERNEL); + if (!dev->bos) + return -ENOMEM; + + /* Now let's get the whole BOS descriptor set */ + buffer = kzalloc(total_len, GFP_KERNEL); + if (!buffer) { + ret = -ENOMEM; + goto err; + } + dev->bos->desc = (struct usb_bos_descriptor *)buffer; + + ret = usb_get_descriptor(dev, USB_DT_BOS, 0, buffer, total_len); + if (ret < total_len) { + dev_err(ddev, "unable to get BOS descriptor set\n"); + if (ret >= 0) + ret = -ENOMSG; + goto err; + } + total_len -= length; + + for (i = 0; i < num; i++) { + buffer += length; + cap = (struct usb_dev_cap_header *)buffer; + length = cap->bLength; + + if (total_len < length) + break; + total_len -= length; + + if (cap->bDescriptorType != USB_DT_DEVICE_CAPABILITY) { + dev_warn(ddev, "descriptor type invalid, skip\n"); + continue; + } + + switch (cap->bDevCapabilityType) { + case USB_CAP_TYPE_WIRELESS_USB: + /* Wireless USB cap descriptor is handled by wusb */ + break; + case USB_CAP_TYPE_EXT: + dev->bos->ext_cap = + (struct usb_ext_cap_descriptor *)buffer; + break; + case USB_SS_CAP_TYPE: + dev->bos->ss_cap = + (struct usb_ss_cap_descriptor *)buffer; + break; + case CONTAINER_ID_TYPE: + dev->bos->ss_id = + (struct usb_ss_container_id_descriptor *)buffer; + break; + default: + break; + } + } + + return 0; + +err: + usb_release_bos_descriptor(dev); + return ret; +} diff --git a/drivers/usb/core/devices.c b/drivers/usb/core/devices.c index 0149c0976e9c..d95696584762 100644 --- a/drivers/usb/core/devices.c +++ b/drivers/usb/core/devices.c @@ -190,7 +190,7 @@ static char *usb_dump_endpoint_descriptor(int speed, char *start, char *end, dir = usb_endpoint_dir_in(desc) ? 'I' : 'O'; if (speed == USB_SPEED_HIGH) { - switch (le16_to_cpu(desc->wMaxPacketSize) & (0x03 << 11)) { + switch (usb_endpoint_maxp(desc) & (0x03 << 11)) { case 1 << 11: bandwidth = 2; break; case 2 << 11: @@ -240,7 +240,7 @@ static char *usb_dump_endpoint_descriptor(int speed, char *start, char *end, start += sprintf(start, format_endpt, desc->bEndpointAddress, dir, desc->bmAttributes, type, - (le16_to_cpu(desc->wMaxPacketSize) & 0x07ff) * + (usb_endpoint_maxp(desc) & 0x07ff) * bandwidth, interval, unit); return start; diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c index 37518dfdeb98..e3beaf229ee3 100644 --- a/drivers/usb/core/devio.c +++ b/drivers/usb/core/devio.c @@ -46,6 +46,7 @@ #include <linux/cdev.h> #include <linux/notifier.h> #include <linux/security.h> +#include <linux/user_namespace.h> #include <asm/uaccess.h> #include <asm/byteorder.h> #include <linux/moduleparam.h> @@ -68,7 +69,7 @@ struct dev_state { wait_queue_head_t wait; /* wake up if a request completed */ unsigned int discsignr; struct pid *disc_pid; - uid_t disc_uid, disc_euid; + const struct cred *cred; void __user *disccontext; unsigned long ifclaimed; u32 secid; @@ -79,7 +80,7 @@ struct async { struct list_head asynclist; struct dev_state *ps; struct pid *pid; - uid_t uid, euid; + const struct cred *cred; unsigned int signr; unsigned int ifnum; void __user *userbuffer; @@ -248,6 +249,7 @@ static struct async *alloc_async(unsigned int numisoframes) static void free_async(struct async *as) { put_pid(as->pid); + put_cred(as->cred); kfree(as->urb->transfer_buffer); kfree(as->urb->setup_packet); usb_free_urb(as->urb); @@ -393,9 +395,8 @@ static void async_completed(struct urb *urb) struct dev_state *ps = as->ps; struct siginfo sinfo; struct pid *pid = NULL; - uid_t uid = 0; - uid_t euid = 0; u32 secid = 0; + const struct cred *cred = NULL; int signr; spin_lock(&ps->lock); @@ -407,9 +408,8 @@ static void async_completed(struct urb *urb) sinfo.si_errno = as->status; sinfo.si_code = SI_ASYNCIO; sinfo.si_addr = as->userurb; - pid = as->pid; - uid = as->uid; - euid = as->euid; + pid = get_pid(as->pid); + cred = get_cred(as->cred); secid = as->secid; } snoop(&urb->dev->dev, "urb complete\n"); @@ -422,9 +422,11 @@ static void async_completed(struct urb *urb) cancel_bulk_urbs(ps, as->bulk_addr); spin_unlock(&ps->lock); - if (signr) - kill_pid_info_as_uid(sinfo.si_signo, &sinfo, pid, uid, - euid, secid); + if (signr) { + kill_pid_info_as_cred(sinfo.si_signo, &sinfo, pid, cred, secid); + put_pid(pid); + put_cred(cred); + } wake_up(&ps->wait); } @@ -607,9 +609,10 @@ static int findintfep(struct usb_device *dev, unsigned int ep) } static int check_ctrlrecip(struct dev_state *ps, unsigned int requesttype, - unsigned int index) + unsigned int request, unsigned int index) { int ret = 0; + struct usb_host_interface *alt_setting; if (ps->dev->state != USB_STATE_UNAUTHENTICATED && ps->dev->state != USB_STATE_ADDRESS @@ -618,6 +621,19 @@ static int check_ctrlrecip(struct dev_state *ps, unsigned int requesttype, if (USB_TYPE_VENDOR == (USB_TYPE_MASK & requesttype)) return 0; + /* + * check for the special corner case 'get_device_id' in the printer + * class specification, where wIndex is (interface << 8 | altsetting) + * instead of just interface + */ + if (requesttype == 0xa1 && request == 0) { + alt_setting = usb_find_alt_setting(ps->dev->actconfig, + index >> 8, index & 0xff); + if (alt_setting + && alt_setting->desc.bInterfaceClass == USB_CLASS_PRINTER) + index >>= 8; + } + index &= 0xff; switch (requesttype & USB_RECIP_MASK) { case USB_RECIP_ENDPOINT: @@ -656,7 +672,6 @@ static int usbdev_open(struct inode *inode, struct file *file) { struct usb_device *dev = NULL; struct dev_state *ps; - const struct cred *cred = current_cred(); int ret; ret = -ENOMEM; @@ -706,8 +721,7 @@ static int usbdev_open(struct inode *inode, struct file *file) init_waitqueue_head(&ps->wait); ps->discsignr = 0; ps->disc_pid = get_pid(task_pid(current)); - ps->disc_uid = cred->uid; - ps->disc_euid = cred->euid; + ps->cred = get_current_cred(); ps->disccontext = NULL; ps->ifclaimed = 0; security_task_getsecid(current, &ps->secid); @@ -749,6 +763,7 @@ static int usbdev_release(struct inode *inode, struct file *file) usb_unlock_device(dev); usb_put_dev(dev); put_pid(ps->disc_pid); + put_cred(ps->cred); as = async_getcompleted(ps); while (as) { @@ -770,7 +785,8 @@ static int proc_control(struct dev_state *ps, void __user *arg) if (copy_from_user(&ctrl, arg, sizeof(ctrl))) return -EFAULT; - ret = check_ctrlrecip(ps, ctrl.bRequestType, ctrl.wIndex); + ret = check_ctrlrecip(ps, ctrl.bRequestType, ctrl.bRequest, + ctrl.wIndex); if (ret) return ret; wLength = ctrl.wLength; /* To suppress 64k PAGE_SIZE warning */ @@ -1048,7 +1064,6 @@ static int proc_do_submiturb(struct dev_state *ps, struct usbdevfs_urb *uurb, struct usb_host_endpoint *ep; struct async *as; struct usb_ctrlrequest *dr = NULL; - const struct cred *cred = current_cred(); unsigned int u, totlen, isofrmlen; int ret, ifnum = -1; int is_in; @@ -1100,7 +1115,7 @@ static int proc_do_submiturb(struct dev_state *ps, struct usbdevfs_urb *uurb, kfree(dr); return -EINVAL; } - ret = check_ctrlrecip(ps, dr->bRequestType, + ret = check_ctrlrecip(ps, dr->bRequestType, dr->bRequest, le16_to_cpup(&dr->wIndex)); if (ret) { kfree(dr); @@ -1262,8 +1277,7 @@ static int proc_do_submiturb(struct dev_state *ps, struct usbdevfs_urb *uurb, as->signr = uurb->signr; as->ifnum = ifnum; as->pid = get_pid(task_pid(current)); - as->uid = cred->uid; - as->euid = cred->euid; + as->cred = get_current_cred(); security_task_getsecid(current, &as->secid); if (!is_in && uurb->buffer_length > 0) { if (copy_from_user(as->urb->transfer_buffer, uurb->buffer, @@ -1981,9 +1995,8 @@ static void usbdev_remove(struct usb_device *udev) sinfo.si_errno = EPIPE; sinfo.si_code = SI_ASYNCIO; sinfo.si_addr = ps->disccontext; - kill_pid_info_as_uid(ps->discsignr, &sinfo, - ps->disc_pid, ps->disc_uid, - ps->disc_euid, ps->secid); + kill_pid_info_as_cred(ps->discsignr, &sinfo, + ps->disc_pid, ps->cred, ps->secid); } } } diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c index 34e3da5aa72a..3b029a0a4787 100644 --- a/drivers/usb/core/driver.c +++ b/drivers/usb/core/driver.c @@ -1046,8 +1046,7 @@ static int usb_resume_device(struct usb_device *udev, pm_message_t msg) /* Non-root devices on a full/low-speed bus must wait for their * companion high-speed root hub, in case a handoff is needed. */ - if (!(msg.event & PM_EVENT_AUTO) && udev->parent && - udev->bus->hs_companion) + if (!PMSG_IS_AUTO(msg) && udev->parent && udev->bus->hs_companion) device_pm_wait_for_dev(&udev->dev, &udev->bus->hs_companion->root_hub->dev); @@ -1075,7 +1074,7 @@ static int usb_suspend_interface(struct usb_device *udev, if (driver->suspend) { status = driver->suspend(intf, msg); - if (status && !(msg.event & PM_EVENT_AUTO)) + if (status && !PMSG_IS_AUTO(msg)) dev_err(&intf->dev, "%s error %d\n", "suspend", status); } else { @@ -1189,7 +1188,7 @@ static int usb_suspend_both(struct usb_device *udev, pm_message_t msg) status = usb_suspend_interface(udev, intf, msg); /* Ignore errors during system sleep transitions */ - if (!(msg.event & PM_EVENT_AUTO)) + if (!PMSG_IS_AUTO(msg)) status = 0; if (status != 0) break; @@ -1199,7 +1198,7 @@ static int usb_suspend_both(struct usb_device *udev, pm_message_t msg) status = usb_suspend_device(udev, msg); /* Again, ignore errors during system sleep transitions */ - if (!(msg.event & PM_EVENT_AUTO)) + if (!PMSG_IS_AUTO(msg)) status = 0; } @@ -1583,7 +1582,7 @@ int usb_autopm_get_interface_async(struct usb_interface *intf) dev_vdbg(&intf->dev, "%s: cnt %d -> %d\n", __func__, atomic_read(&intf->dev.power.usage_count), status); - if (status > 0) + if (status > 0 || status == -EINPROGRESS) status = 0; return status; } @@ -1700,6 +1699,20 @@ int usb_runtime_idle(struct device *dev) return 0; } +int usb_set_usb2_hardware_lpm(struct usb_device *udev, int enable) +{ + struct usb_hcd *hcd = bus_to_hcd(udev->bus); + int ret = -EPERM; + + if (hcd->driver->set_usb2_hw_lpm) { + ret = hcd->driver->set_usb2_hw_lpm(hcd, udev, enable); + if (!ret) + udev->usb2_hw_lpm_enabled = enable; + } + + return ret; +} + #endif /* CONFIG_USB_SUSPEND */ struct bus_type usb_bus_type = { diff --git a/drivers/usb/core/endpoint.c b/drivers/usb/core/endpoint.c index df502a98d0df..db7fe50c23d4 100644 --- a/drivers/usb/core/endpoint.c +++ b/drivers/usb/core/endpoint.c @@ -56,7 +56,7 @@ static ssize_t show_ep_wMaxPacketSize(struct device *dev, { struct ep_device *ep = to_ep_device(dev); return sprintf(buf, "%04x\n", - le16_to_cpu(ep->desc->wMaxPacketSize) & 0x07ff); + usb_endpoint_maxp(ep->desc) & 0x07ff); } static DEVICE_ATTR(wMaxPacketSize, S_IRUGO, show_ep_wMaxPacketSize, NULL); diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c index ce22f4a84ed0..a004db35f6d0 100644 --- a/drivers/usb/core/hcd-pci.c +++ b/drivers/usb/core/hcd-pci.c @@ -242,7 +242,7 @@ int usb_hcd_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) pci_set_master(dev); - retval = usb_add_hcd(hcd, dev->irq, IRQF_DISABLED | IRQF_SHARED); + retval = usb_add_hcd(hcd, dev->irq, IRQF_SHARED); if (retval != 0) goto unmap_registers; set_hs_companion(dev, hcd); diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index 8669ba3fe794..13222d352a61 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -442,7 +442,11 @@ static int rh_call_control (struct usb_hcd *hcd, struct urb *urb) struct usb_ctrlrequest *cmd; u16 typeReq, wValue, wIndex, wLength; u8 *ubuf = urb->transfer_buffer; - u8 tbuf [sizeof (struct usb_hub_descriptor)] + /* + * tbuf should be as big as the BOS descriptor and + * the USB hub descriptor. + */ + u8 tbuf[USB_DT_BOS_SIZE + USB_DT_USB_SS_CAP_SIZE] __attribute__((aligned(4))); const u8 *bufp = tbuf; unsigned len = 0; @@ -562,6 +566,8 @@ static int rh_call_control (struct usb_hcd *hcd, struct urb *urb) else /* unsupported IDs --> "protocol stall" */ goto error; break; + case USB_DT_BOS << 8: + goto nongeneric; default: goto error; } @@ -596,6 +602,7 @@ static int rh_call_control (struct usb_hcd *hcd, struct urb *urb) /* CLASS REQUESTS (and errors) */ default: +nongeneric: /* non-generic request */ switch (typeReq) { case GetHubStatus: @@ -605,6 +612,9 @@ static int rh_call_control (struct usb_hcd *hcd, struct urb *urb) case GetHubDescriptor: len = sizeof (struct usb_hub_descriptor); break; + case DeviceRequest | USB_REQ_GET_DESCRIPTOR: + /* len is returned by hub_control */ + break; } status = hcd->driver->hub_control (hcd, typeReq, wValue, wIndex, @@ -615,7 +625,7 @@ error: status = -EPIPE; } - if (status) { + if (status < 0) { len = 0; if (status != -EPIPE) { dev_dbg (hcd->self.controller, @@ -624,6 +634,10 @@ error: typeReq, wValue, wIndex, wLength, status); } + } else if (status > 0) { + /* hub_control may return the length of data copied. */ + len = status; + status = 0; } if (len) { if (urb->transfer_buffer_length < len) @@ -1775,6 +1789,8 @@ int usb_hcd_alloc_bandwidth(struct usb_device *udev, struct usb_interface *iface = usb_ifnum_to_if(udev, cur_alt->desc.bInterfaceNumber); + if (!iface) + return -EINVAL; if (iface->resetting_device) { /* * The USB core just reset the device, so the xHCI host @@ -1959,8 +1975,9 @@ int hcd_bus_suspend(struct usb_device *rhdev, pm_message_t msg) int status; int old_state = hcd->state; - dev_dbg(&rhdev->dev, "bus %s%s\n", - (msg.event & PM_EVENT_AUTO ? "auto-" : ""), "suspend"); + dev_dbg(&rhdev->dev, "bus %ssuspend, wakeup %d\n", + (PMSG_IS_AUTO(msg) ? "auto-" : ""), + rhdev->do_remote_wakeup); if (HCD_DEAD(hcd)) { dev_dbg(&rhdev->dev, "skipped %s of dead bus\n", "suspend"); return 0; @@ -1995,8 +2012,8 @@ int hcd_bus_resume(struct usb_device *rhdev, pm_message_t msg) int status; int old_state = hcd->state; - dev_dbg(&rhdev->dev, "usb %s%s\n", - (msg.event & PM_EVENT_AUTO ? "auto-" : ""), "resume"); + dev_dbg(&rhdev->dev, "usb %sresume\n", + (PMSG_IS_AUTO(msg) ? "auto-" : "")); if (HCD_DEAD(hcd)) { dev_dbg(&rhdev->dev, "skipped %s of dead bus\n", "resume"); return 0; @@ -2427,7 +2444,7 @@ int usb_add_hcd(struct usb_hcd *hcd, * but drivers can override it in reset() if needed, along with * recording the overall controller's system wakeup capability. */ - device_init_wakeup(&rhdev->dev, 1); + device_set_wakeup_capable(&rhdev->dev, 1); /* HCD_FLAG_RH_RUNNING doesn't matter until the root hub is * registered. But since the controller can die at any time, @@ -2476,6 +2493,13 @@ int usb_add_hcd(struct usb_hcd *hcd, } if (hcd->uses_new_polling && HCD_POLL_RH(hcd)) usb_hcd_poll_rh_status(hcd); + + /* + * Host controllers don't generate their own wakeup requests; + * they only forward requests from the root hub. Therefore + * controllers should always be enabled for remote wakeup. + */ + device_wakeup_enable(hcd->self.controller); return retval; error_create_attr_group: diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index a428aa080a36..96f05b29c9ad 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -1636,11 +1636,6 @@ void usb_disconnect(struct usb_device **pdev) int i; struct usb_hcd *hcd = bus_to_hcd(udev->bus); - if (!udev) { - pr_debug ("%s nodev\n", __func__); - return; - } - /* mark the device as inactive, so any further urb submissions for * this device (and any of its children) will fail immediately. * this quiesces everything except pending urbs. @@ -2030,11 +2025,23 @@ static unsigned hub_is_wusb(struct usb_hub *hub) #define HUB_ROOT_RESET_TIME 50 /* times are in msec */ #define HUB_SHORT_RESET_TIME 10 +#define HUB_BH_RESET_TIME 50 #define HUB_LONG_RESET_TIME 200 #define HUB_RESET_TIMEOUT 500 +static int hub_port_reset(struct usb_hub *hub, int port1, + struct usb_device *udev, unsigned int delay, bool warm); + +/* Is a USB 3.0 port in the Inactive state? */ +static bool hub_port_inactive(struct usb_hub *hub, u16 portstatus) +{ + return hub_is_superspeed(hub->hdev) && + (portstatus & USB_PORT_STAT_LINK_STATE) == + USB_SS_PORT_LS_SS_INACTIVE; +} + static int hub_port_wait_reset(struct usb_hub *hub, int port1, - struct usb_device *udev, unsigned int delay) + struct usb_device *udev, unsigned int delay, bool warm) { int delay_time, ret; u16 portstatus; @@ -2051,28 +2058,71 @@ static int hub_port_wait_reset(struct usb_hub *hub, int port1, if (ret < 0) return ret; - /* Device went away? */ - if (!(portstatus & USB_PORT_STAT_CONNECTION)) - return -ENOTCONN; - - /* bomb out completely if the connection bounced */ - if ((portchange & USB_PORT_STAT_C_CONNECTION)) - return -ENOTCONN; - - /* if we`ve finished resetting, then break out of the loop */ - if (!(portstatus & USB_PORT_STAT_RESET) && - (portstatus & USB_PORT_STAT_ENABLE)) { - if (hub_is_wusb(hub)) - udev->speed = USB_SPEED_WIRELESS; - else if (hub_is_superspeed(hub->hdev)) - udev->speed = USB_SPEED_SUPER; - else if (portstatus & USB_PORT_STAT_HIGH_SPEED) - udev->speed = USB_SPEED_HIGH; - else if (portstatus & USB_PORT_STAT_LOW_SPEED) - udev->speed = USB_SPEED_LOW; - else - udev->speed = USB_SPEED_FULL; - return 0; + /* + * Some buggy devices require a warm reset to be issued even + * when the port appears not to be connected. + */ + if (!warm) { + /* + * Some buggy devices can cause an NEC host controller + * to transition to the "Error" state after a hot port + * reset. This will show up as the port state in + * "Inactive", and the port may also report a + * disconnect. Forcing a warm port reset seems to make + * the device work. + * + * See https://bugzilla.kernel.org/show_bug.cgi?id=41752 + */ + if (hub_port_inactive(hub, portstatus)) { + int ret; + + if ((portchange & USB_PORT_STAT_C_CONNECTION)) + clear_port_feature(hub->hdev, port1, + USB_PORT_FEAT_C_CONNECTION); + if (portchange & USB_PORT_STAT_C_LINK_STATE) + clear_port_feature(hub->hdev, port1, + USB_PORT_FEAT_C_PORT_LINK_STATE); + if (portchange & USB_PORT_STAT_C_RESET) + clear_port_feature(hub->hdev, port1, + USB_PORT_FEAT_C_RESET); + dev_dbg(hub->intfdev, "hot reset failed, warm reset port %d\n", + port1); + ret = hub_port_reset(hub, port1, + udev, HUB_BH_RESET_TIME, + true); + if ((portchange & USB_PORT_STAT_C_CONNECTION)) + clear_port_feature(hub->hdev, port1, + USB_PORT_FEAT_C_CONNECTION); + return ret; + } + /* Device went away? */ + if (!(portstatus & USB_PORT_STAT_CONNECTION)) + return -ENOTCONN; + + /* bomb out completely if the connection bounced */ + if ((portchange & USB_PORT_STAT_C_CONNECTION)) + return -ENOTCONN; + + /* if we`ve finished resetting, then break out of + * the loop + */ + if (!(portstatus & USB_PORT_STAT_RESET) && + (portstatus & USB_PORT_STAT_ENABLE)) { + if (hub_is_wusb(hub)) + udev->speed = USB_SPEED_WIRELESS; + else if (hub_is_superspeed(hub->hdev)) + udev->speed = USB_SPEED_SUPER; + else if (portstatus & USB_PORT_STAT_HIGH_SPEED) + udev->speed = USB_SPEED_HIGH; + else if (portstatus & USB_PORT_STAT_LOW_SPEED) + udev->speed = USB_SPEED_LOW; + else + udev->speed = USB_SPEED_FULL; + return 0; + } + } else { + if (portchange & USB_PORT_STAT_C_BH_RESET) + return 0; } /* switch to the long delay after two short delay failures */ @@ -2080,35 +2130,84 @@ static int hub_port_wait_reset(struct usb_hub *hub, int port1, delay = HUB_LONG_RESET_TIME; dev_dbg (hub->intfdev, - "port %d not reset yet, waiting %dms\n", - port1, delay); + "port %d not %sreset yet, waiting %dms\n", + port1, warm ? "warm " : "", delay); } return -EBUSY; } +static void hub_port_finish_reset(struct usb_hub *hub, int port1, + struct usb_device *udev, int *status, bool warm) +{ + switch (*status) { + case 0: + if (!warm) { + struct usb_hcd *hcd; + /* TRSTRCY = 10 ms; plus some extra */ + msleep(10 + 40); + update_devnum(udev, 0); + hcd = bus_to_hcd(udev->bus); + if (hcd->driver->reset_device) { + *status = hcd->driver->reset_device(hcd, udev); + if (*status < 0) { + dev_err(&udev->dev, "Cannot reset " + "HCD device state\n"); + break; + } + } + } + /* FALL THROUGH */ + case -ENOTCONN: + case -ENODEV: + clear_port_feature(hub->hdev, + port1, USB_PORT_FEAT_C_RESET); + /* FIXME need disconnect() for NOTATTACHED device */ + if (warm) { + clear_port_feature(hub->hdev, port1, + USB_PORT_FEAT_C_BH_PORT_RESET); + clear_port_feature(hub->hdev, port1, + USB_PORT_FEAT_C_PORT_LINK_STATE); + } else { + usb_set_device_state(udev, *status + ? USB_STATE_NOTATTACHED + : USB_STATE_DEFAULT); + } + break; + } +} + +/* Handle port reset and port warm(BH) reset (for USB3 protocol ports) */ static int hub_port_reset(struct usb_hub *hub, int port1, - struct usb_device *udev, unsigned int delay) + struct usb_device *udev, unsigned int delay, bool warm) { int i, status; - struct usb_hcd *hcd; - hcd = bus_to_hcd(udev->bus); - /* Block EHCI CF initialization during the port reset. - * Some companion controllers don't like it when they mix. - */ - down_read(&ehci_cf_port_reset_rwsem); + if (!warm) { + /* Block EHCI CF initialization during the port reset. + * Some companion controllers don't like it when they mix. + */ + down_read(&ehci_cf_port_reset_rwsem); + } else { + if (!hub_is_superspeed(hub->hdev)) { + dev_err(hub->intfdev, "only USB3 hub support " + "warm reset\n"); + return -EINVAL; + } + } /* Reset the port */ for (i = 0; i < PORT_RESET_TRIES; i++) { - status = set_port_feature(hub->hdev, - port1, USB_PORT_FEAT_RESET); - if (status) + status = set_port_feature(hub->hdev, port1, (warm ? + USB_PORT_FEAT_BH_PORT_RESET : + USB_PORT_FEAT_RESET)); + if (status) { dev_err(hub->intfdev, - "cannot reset port %d (err = %d)\n", - port1, status); - else { - status = hub_port_wait_reset(hub, port1, udev, delay); + "cannot %sreset port %d (err = %d)\n", + warm ? "warm " : "", port1, status); + } else { + status = hub_port_wait_reset(hub, port1, udev, delay, + warm); if (status && status != -ENOTCONN) dev_dbg(hub->intfdev, "port_wait_reset: err = %d\n", @@ -2116,34 +2215,14 @@ static int hub_port_reset(struct usb_hub *hub, int port1, } /* return on disconnect or reset */ - switch (status) { - case 0: - /* TRSTRCY = 10 ms; plus some extra */ - msleep(10 + 40); - update_devnum(udev, 0); - if (hcd->driver->reset_device) { - status = hcd->driver->reset_device(hcd, udev); - if (status < 0) { - dev_err(&udev->dev, "Cannot reset " - "HCD device state\n"); - break; - } - } - /* FALL THROUGH */ - case -ENOTCONN: - case -ENODEV: - clear_port_feature(hub->hdev, - port1, USB_PORT_FEAT_C_RESET); - /* FIXME need disconnect() for NOTATTACHED device */ - usb_set_device_state(udev, status - ? USB_STATE_NOTATTACHED - : USB_STATE_DEFAULT); + if (status == 0 || status == -ENOTCONN || status == -ENODEV) { + hub_port_finish_reset(hub, port1, udev, &status, warm); goto done; } dev_dbg (hub->intfdev, - "port %d not enabled, trying reset again...\n", - port1); + "port %d not enabled, trying %sreset again...\n", + port1, warm ? "warm " : ""); delay = HUB_LONG_RESET_TIME; } @@ -2151,45 +2230,11 @@ static int hub_port_reset(struct usb_hub *hub, int port1, "Cannot enable port %i. Maybe the USB cable is bad?\n", port1); - done: - up_read(&ehci_cf_port_reset_rwsem); - return status; -} - -/* Warm reset a USB3 protocol port */ -static int hub_port_warm_reset(struct usb_hub *hub, int port) -{ - int ret; - u16 portstatus, portchange; - - if (!hub_is_superspeed(hub->hdev)) { - dev_err(hub->intfdev, "only USB3 hub support warm reset\n"); - return -EINVAL; - } - - /* Warm reset the port */ - ret = set_port_feature(hub->hdev, - port, USB_PORT_FEAT_BH_PORT_RESET); - if (ret) { - dev_err(hub->intfdev, "cannot warm reset port %d\n", port); - return ret; - } - - msleep(20); - ret = hub_port_status(hub, port, &portstatus, &portchange); - - if (portchange & USB_PORT_STAT_C_RESET) - clear_port_feature(hub->hdev, port, USB_PORT_FEAT_C_RESET); - - if (portchange & USB_PORT_STAT_C_BH_RESET) - clear_port_feature(hub->hdev, port, - USB_PORT_FEAT_C_BH_PORT_RESET); - - if (portchange & USB_PORT_STAT_C_LINK_STATE) - clear_port_feature(hub->hdev, port, - USB_PORT_FEAT_C_PORT_LINK_STATE); +done: + if (!warm) + up_read(&ehci_cf_port_reset_rwsem); - return ret; + return status; } /* Check if a port is power on */ @@ -2324,8 +2369,6 @@ int usb_port_suspend(struct usb_device *udev, pm_message_t msg) int port1 = udev->portnum; int status; - // dev_dbg(hub->intfdev, "suspend port %d\n", port1); - /* enable remote wakeup when appropriate; this lets the device * wake up the upstream hub (including maybe the root hub). * @@ -2342,11 +2385,15 @@ int usb_port_suspend(struct usb_device *udev, pm_message_t msg) dev_dbg(&udev->dev, "won't remote wakeup, status %d\n", status); /* bail if autosuspend is requested */ - if (msg.event & PM_EVENT_AUTO) + if (PMSG_IS_AUTO(msg)) return status; } } + /* disable USB2 hardware LPM */ + if (udev->usb2_hw_lpm_enabled == 1) + usb_set_usb2_hardware_lpm(udev, 0); + /* see 7.1.7.6 */ if (hub_is_superspeed(hub->hdev)) status = set_port_feature(hub->hdev, @@ -2367,12 +2414,13 @@ int usb_port_suspend(struct usb_device *udev, pm_message_t msg) USB_CTRL_SET_TIMEOUT); /* System sleep transitions should never fail */ - if (!(msg.event & PM_EVENT_AUTO)) + if (!PMSG_IS_AUTO(msg)) status = 0; } else { /* device has up to 10 msec to fully suspend */ - dev_dbg(&udev->dev, "usb %ssuspend\n", - (msg.event & PM_EVENT_AUTO ? "auto-" : "")); + dev_dbg(&udev->dev, "usb %ssuspend, wakeup %d\n", + (PMSG_IS_AUTO(msg) ? "auto-" : ""), + udev->do_remote_wakeup); usb_set_device_state(udev, USB_STATE_SUSPENDED); msleep(10); } @@ -2523,7 +2571,7 @@ int usb_port_resume(struct usb_device *udev, pm_message_t msg) } else { /* drive resume for at least 20 msec */ dev_dbg(&udev->dev, "usb %sresume\n", - (msg.event & PM_EVENT_AUTO ? "auto-" : "")); + (PMSG_IS_AUTO(msg) ? "auto-" : "")); msleep(25); /* Virtual root hubs can trigger on GET_PORT_STATUS to @@ -2558,7 +2606,12 @@ int usb_port_resume(struct usb_device *udev, pm_message_t msg) if (status < 0) { dev_dbg(&udev->dev, "can't resume, status %d\n", status); hub_port_logical_disconnect(hub, port1); + } else { + /* Try to enable USB2 hardware LPM */ + if (udev->usb2_hw_lpm_capable == 1) + usb_set_usb2_hardware_lpm(udev, 1); } + return status; } @@ -2625,7 +2678,7 @@ static int hub_suspend(struct usb_interface *intf, pm_message_t msg) udev = hdev->children [port1-1]; if (udev && udev->can_submit) { dev_warn(&intf->dev, "port %d nyet suspended\n", port1); - if (msg.event & PM_EVENT_AUTO) + if (PMSG_IS_AUTO(msg)) return -EBUSY; } } @@ -2798,7 +2851,7 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1, int i, j, retval; unsigned delay = HUB_SHORT_RESET_TIME; enum usb_device_speed oldspeed = udev->speed; - char *speed, *type; + const char *speed; int devnum = udev->devnum; /* root hub ports have a slightly longer reset period @@ -2819,7 +2872,7 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1, /* Reset the device; full speed may morph to high speed */ /* FIXME a USB 2.0 device may morph into SuperSpeed on reset. */ - retval = hub_port_reset(hub, port1, udev, delay); + retval = hub_port_reset(hub, port1, udev, delay, false); if (retval < 0) /* error or disconnect */ goto fail; /* success, speed is known */ @@ -2858,25 +2911,16 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1, default: goto fail; } - - type = ""; - switch (udev->speed) { - case USB_SPEED_LOW: speed = "low"; break; - case USB_SPEED_FULL: speed = "full"; break; - case USB_SPEED_HIGH: speed = "high"; break; - case USB_SPEED_SUPER: - speed = "super"; - break; - case USB_SPEED_WIRELESS: - speed = "variable"; - type = "Wireless "; - break; - default: speed = "?"; break; - } + + if (udev->speed == USB_SPEED_WIRELESS) + speed = "variable speed Wireless"; + else + speed = usb_speed_string(udev->speed); + if (udev->speed != USB_SPEED_SUPER) dev_info(&udev->dev, - "%s %s speed %sUSB device number %d using %s\n", - (udev->config) ? "reset" : "new", speed, type, + "%s %s USB device number %d using %s\n", + (udev->config) ? "reset" : "new", speed, devnum, udev->bus->controller->driver->name); /* Set up TT records, if needed */ @@ -2949,7 +2993,7 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1, buf->bMaxPacketSize0; kfree(buf); - retval = hub_port_reset(hub, port1, udev, delay); + retval = hub_port_reset(hub, port1, udev, delay, false); if (retval < 0) /* error or disconnect */ goto fail; if (oldspeed != udev->speed) { @@ -3023,7 +3067,7 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1, i = 512; else i = udev->descriptor.bMaxPacketSize0; - if (le16_to_cpu(udev->ep0.desc.wMaxPacketSize) != i) { + if (usb_endpoint_maxp(&udev->ep0.desc) != i) { if (udev->speed == USB_SPEED_LOW || !(i == 8 || i == 16 || i == 32 || i == 64)) { dev_err(&udev->dev, "Invalid ep0 maxpacket: %d\n", i); @@ -3047,6 +3091,15 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1, goto fail; } + if (udev->wusb == 0 && le16_to_cpu(udev->descriptor.bcdUSB) >= 0x0201) { + retval = usb_get_bos_descriptor(udev); + if (!retval) { + if (udev->bos->ext_cap && (USB_LPM_SUPPORT & + le32_to_cpu(udev->bos->ext_cap->bmAttributes))) + udev->lpm_capable = 1; + } + } + retval = 0; /* notify HCD that we have a device connected and addressed */ if (hcd->driver->update_device) @@ -3570,7 +3623,8 @@ static void hub_events(void) (portstatus & USB_PORT_STAT_LINK_STATE) == USB_SS_PORT_LS_SS_INACTIVE) { dev_dbg(hub_dev, "warm reset port %d\n", i); - hub_port_warm_reset(hub, i); + hub_port_reset(hub, i, NULL, + HUB_BH_RESET_TIME, true); } if (connect_change) diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c index 0b5ec234c787..b3bdfede45e6 100644 --- a/drivers/usb/core/message.c +++ b/drivers/usb/core/message.c @@ -435,7 +435,7 @@ int usb_sg_init(struct usb_sg_request *io, struct usb_device *dev, len = sg->length; if (length) { - len = min_t(unsigned, len, length); + len = min_t(size_t, len, length); length -= len; if (length == 0) io->entries = i + 1; diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index 81ce6a8e1d94..d6a8d8269bfb 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -38,6 +38,27 @@ static const struct usb_device_id usb_quirk_list[] = { /* Creative SB Audigy 2 NX */ { USB_DEVICE(0x041e, 0x3020), .driver_info = USB_QUIRK_RESET_RESUME }, + /* Logitech Webcam C200 */ + { USB_DEVICE(0x046d, 0x0802), .driver_info = USB_QUIRK_RESET_RESUME }, + + /* Logitech Webcam C250 */ + { USB_DEVICE(0x046d, 0x0804), .driver_info = USB_QUIRK_RESET_RESUME }, + + /* Logitech Webcam C300 */ + { USB_DEVICE(0x046d, 0x0805), .driver_info = USB_QUIRK_RESET_RESUME }, + + /* Logitech Webcam B/C500 */ + { USB_DEVICE(0x046d, 0x0807), .driver_info = USB_QUIRK_RESET_RESUME }, + + /* Logitech Webcam Pro 9000 */ + { USB_DEVICE(0x046d, 0x0809), .driver_info = USB_QUIRK_RESET_RESUME }, + + /* Logitech Webcam C310 */ + { USB_DEVICE(0x046d, 0x081b), .driver_info = USB_QUIRK_RESET_RESUME }, + + /* Logitech Webcam C270 */ + { USB_DEVICE(0x046d, 0x0825), .driver_info = USB_QUIRK_RESET_RESUME }, + /* Logitech Harmony 700-series */ { USB_DEVICE(0x046d, 0xc122), .driver_info = USB_QUIRK_DELAY_INIT }, @@ -69,6 +90,9 @@ static const struct usb_device_id usb_quirk_list[] = { { USB_DEVICE(0x06a3, 0x0006), .driver_info = USB_QUIRK_CONFIG_INTF_STRINGS }, + /* Guillemot Webcam Hercules Dualpix Exchange*/ + { USB_DEVICE(0x06f8, 0x0804), .driver_info = USB_QUIRK_RESET_RESUME }, + /* M-Systems Flash Disk Pioneers */ { USB_DEVICE(0x08ec, 0x1000), .driver_info = USB_QUIRK_RESET_RESUME }, diff --git a/drivers/usb/core/sysfs.c b/drivers/usb/core/sysfs.c index cf05b97693ea..662c0cf3a3e1 100644 --- a/drivers/usb/core/sysfs.c +++ b/drivers/usb/core/sysfs.c @@ -412,6 +412,56 @@ set_level(struct device *dev, struct device_attribute *attr, static DEVICE_ATTR(level, S_IRUGO | S_IWUSR, show_level, set_level); +static ssize_t +show_usb2_hardware_lpm(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct usb_device *udev = to_usb_device(dev); + const char *p; + + if (udev->usb2_hw_lpm_enabled == 1) + p = "enabled"; + else + p = "disabled"; + + return sprintf(buf, "%s\n", p); +} + +static ssize_t +set_usb2_hardware_lpm(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct usb_device *udev = to_usb_device(dev); + bool value; + int ret; + + usb_lock_device(udev); + + ret = strtobool(buf, &value); + + if (!ret) + ret = usb_set_usb2_hardware_lpm(udev, value); + + usb_unlock_device(udev); + + if (!ret) + return count; + + return ret; +} + +static DEVICE_ATTR(usb2_hardware_lpm, S_IRUGO | S_IWUSR, show_usb2_hardware_lpm, + set_usb2_hardware_lpm); + +static struct attribute *usb2_hardware_lpm_attr[] = { + &dev_attr_usb2_hardware_lpm.attr, + NULL, +}; +static struct attribute_group usb2_hardware_lpm_attr_group = { + .name = power_group_name, + .attrs = usb2_hardware_lpm_attr, +}; + static struct attribute *power_attrs[] = { &dev_attr_autosuspend.attr, &dev_attr_level.attr, @@ -428,13 +478,20 @@ static int add_power_attributes(struct device *dev) { int rc = 0; - if (is_usb_device(dev)) + if (is_usb_device(dev)) { + struct usb_device *udev = to_usb_device(dev); rc = sysfs_merge_group(&dev->kobj, &power_attr_group); + if (udev->usb2_hw_lpm_capable == 1) + rc = sysfs_merge_group(&dev->kobj, + &usb2_hardware_lpm_attr_group); + } + return rc; } static void remove_power_attributes(struct device *dev) { + sysfs_unmerge_group(&dev->kobj, &usb2_hardware_lpm_attr_group); sysfs_unmerge_group(&dev->kobj, &power_attr_group); } diff --git a/drivers/usb/core/urb.c b/drivers/usb/core/urb.c index ae334b067c13..909625b91eb3 100644 --- a/drivers/usb/core/urb.c +++ b/drivers/usb/core/urb.c @@ -350,7 +350,7 @@ int usb_submit_urb(struct urb *urb, gfp_t mem_flags) dev->state < USB_STATE_CONFIGURED) return -ENODEV; - max = le16_to_cpu(ep->desc.wMaxPacketSize); + max = usb_endpoint_maxp(&ep->desc); if (max <= 0) { dev_dbg(&dev->dev, "bogus endpoint ep%d%s in %s (bad maxpacket %d)\n", diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c index 8706fc97e60f..73cd90012ec5 100644 --- a/drivers/usb/core/usb.c +++ b/drivers/usb/core/usb.c @@ -225,6 +225,7 @@ static void usb_release_dev(struct device *dev) hcd = bus_to_hcd(udev->bus); usb_destroy_configuration(udev); + usb_release_bos_descriptor(udev); usb_put_hcd(hcd); kfree(udev->product); kfree(udev->manufacturer); diff --git a/drivers/usb/core/usb.h b/drivers/usb/core/usb.h index d44d4b7bbf17..3888778582c4 100644 --- a/drivers/usb/core/usb.h +++ b/drivers/usb/core/usb.h @@ -28,6 +28,8 @@ extern int usb_remove_device(struct usb_device *udev); extern int usb_get_device_descriptor(struct usb_device *dev, unsigned int size); +extern int usb_get_bos_descriptor(struct usb_device *dev); +extern void usb_release_bos_descriptor(struct usb_device *dev); extern char *usb_cache_string(struct usb_device *udev, int index); extern int usb_set_configuration(struct usb_device *dev, int configuration); extern int usb_choose_configuration(struct usb_device *udev); @@ -80,6 +82,7 @@ extern int usb_remote_wakeup(struct usb_device *dev); extern int usb_runtime_suspend(struct device *dev); extern int usb_runtime_resume(struct device *dev); extern int usb_runtime_idle(struct device *dev); +extern int usb_set_usb2_hardware_lpm(struct usb_device *udev, int enable); #else @@ -94,6 +97,10 @@ static inline int usb_remote_wakeup(struct usb_device *udev) return 0; } +static inline int usb_set_usb2_hardware_lpm(struct usb_device *udev, int enable) +{ + return 0; +} #endif extern struct bus_type usb_bus_type; diff --git a/drivers/usb/dwc3/Kconfig b/drivers/usb/dwc3/Kconfig new file mode 100644 index 000000000000..3c1d67d324fd --- /dev/null +++ b/drivers/usb/dwc3/Kconfig @@ -0,0 +1,25 @@ +config USB_DWC3 + tristate "DesignWare USB3 DRD Core Support" + depends on (USB || USB_GADGET) + select USB_OTG_UTILS + help + Say Y or M here if your system has a Dual Role SuperSpeed + USB controller based on the DesignWare USB3 IP Core. + + If you choose to build this driver is a dynamically linked + module, the module will be called dwc3.ko. + +if USB_DWC3 + +config USB_DWC3_DEBUG + bool "Enable Debugging Messages" + help + Say Y here to enable debugging messages on DWC3 Driver. + +config USB_DWC3_VERBOSE + bool "Enable Verbose Debugging Messages" + depends on USB_DWC3_DEBUG + help + Say Y here to enable verbose debugging messages on DWC3 Driver. + +endif diff --git a/drivers/usb/dwc3/Makefile b/drivers/usb/dwc3/Makefile new file mode 100644 index 000000000000..593d1dbc465b --- /dev/null +++ b/drivers/usb/dwc3/Makefile @@ -0,0 +1,36 @@ +ccflags-$(CONFIG_USB_DWC3_DEBUG) := -DDEBUG +ccflags-$(CONFIG_USB_DWC3_VERBOSE) += -DVERBOSE_DEBUG + +obj-$(CONFIG_USB_DWC3) += dwc3.o + +dwc3-y := core.o + +ifneq ($(CONFIG_USB_GADGET_DWC3),) + dwc3-y += gadget.o ep0.o +endif + +ifneq ($(CONFIG_DEBUG_FS),) + dwc3-y += debugfs.o +endif + +## +# Platform-specific glue layers go here +# +# NOTICE: Make sure your glue layer doesn't depend on anything +# which is arch-specific and that it compiles on all situations. +# +# We want to keep this requirement in order to be able to compile +# the entire driver (with all its glue layers) on several architectures +# and make sure it compiles fine. This will also help with allmodconfig +# and allyesconfig builds. +# +# The only exception is the PCI glue layer, but that's only because +# PCI doesn't provide nops if CONFIG_PCI isn't enabled. +## + +obj-$(CONFIG_USB_DWC3) += dwc3-omap.o + +ifneq ($(CONFIG_PCI),) + obj-$(CONFIG_USB_DWC3) += dwc3-pci.o +endif + diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c new file mode 100644 index 000000000000..717ebc9ff941 --- /dev/null +++ b/drivers/usb/dwc3/core.c @@ -0,0 +1,484 @@ +/** + * core.c - DesignWare USB3 DRD Controller Core file + * + * Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com + * + * Authors: Felipe Balbi <balbi@ti.com>, + * Sebastian Andrzej Siewior <bigeasy@linutronix.de> + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. The names of the above-listed copyright holders may not be used + * to endorse or promote products derived from this software without + * specific prior written permission. + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2, as published by the Free + * Software Foundation. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS + * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, + * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR + * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR + * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, + * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, + * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR + * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/spinlock.h> +#include <linux/platform_device.h> +#include <linux/pm_runtime.h> +#include <linux/interrupt.h> +#include <linux/ioport.h> +#include <linux/io.h> +#include <linux/list.h> +#include <linux/delay.h> +#include <linux/dma-mapping.h> + +#include <linux/usb/ch9.h> +#include <linux/usb/gadget.h> +#include <linux/module.h> + +#include "core.h" +#include "gadget.h" +#include "io.h" + +#include "debug.h" + +/** + * dwc3_core_soft_reset - Issues core soft reset and PHY reset + * @dwc: pointer to our context structure + */ +static void dwc3_core_soft_reset(struct dwc3 *dwc) +{ + u32 reg; + + /* Before Resetting PHY, put Core in Reset */ + reg = dwc3_readl(dwc->regs, DWC3_GCTL); + reg |= DWC3_GCTL_CORESOFTRESET; + dwc3_writel(dwc->regs, DWC3_GCTL, reg); + + /* Assert USB3 PHY reset */ + reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0)); + reg |= DWC3_GUSB3PIPECTL_PHYSOFTRST; + dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), reg); + + /* Assert USB2 PHY reset */ + reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0)); + reg |= DWC3_GUSB2PHYCFG_PHYSOFTRST; + dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg); + + mdelay(100); + + /* Clear USB3 PHY reset */ + reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0)); + reg &= ~DWC3_GUSB3PIPECTL_PHYSOFTRST; + dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), reg); + + /* Clear USB2 PHY reset */ + reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0)); + reg &= ~DWC3_GUSB2PHYCFG_PHYSOFTRST; + dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg); + + /* After PHYs are stable we can take Core out of reset state */ + reg = dwc3_readl(dwc->regs, DWC3_GCTL); + reg &= ~DWC3_GCTL_CORESOFTRESET; + dwc3_writel(dwc->regs, DWC3_GCTL, reg); +} + +/** + * dwc3_free_one_event_buffer - Frees one event buffer + * @dwc: Pointer to our controller context structure + * @evt: Pointer to event buffer to be freed + */ +static void dwc3_free_one_event_buffer(struct dwc3 *dwc, + struct dwc3_event_buffer *evt) +{ + dma_free_coherent(dwc->dev, evt->length, evt->buf, evt->dma); + kfree(evt); +} + +/** + * dwc3_alloc_one_event_buffer - Allocated one event buffer structure + * @dwc: Pointer to our controller context structure + * @length: size of the event buffer + * + * Returns a pointer to the allocated event buffer structure on succes + * otherwise ERR_PTR(errno). + */ +static struct dwc3_event_buffer *__devinit +dwc3_alloc_one_event_buffer(struct dwc3 *dwc, unsigned length) +{ + struct dwc3_event_buffer *evt; + + evt = kzalloc(sizeof(*evt), GFP_KERNEL); + if (!evt) + return ERR_PTR(-ENOMEM); + + evt->dwc = dwc; + evt->length = length; + evt->buf = dma_alloc_coherent(dwc->dev, length, + &evt->dma, GFP_KERNEL); + if (!evt->buf) { + kfree(evt); + return ERR_PTR(-ENOMEM); + } + + return evt; +} + +/** + * dwc3_free_event_buffers - frees all allocated event buffers + * @dwc: Pointer to our controller context structure + */ +static void dwc3_free_event_buffers(struct dwc3 *dwc) +{ + struct dwc3_event_buffer *evt; + int i; + + for (i = 0; i < DWC3_EVENT_BUFFERS_NUM; i++) { + evt = dwc->ev_buffs[i]; + if (evt) { + dwc3_free_one_event_buffer(dwc, evt); + dwc->ev_buffs[i] = NULL; + } + } +} + +/** + * dwc3_alloc_event_buffers - Allocates @num event buffers of size @length + * @dwc: Pointer to out controller context structure + * @num: number of event buffers to allocate + * @length: size of event buffer + * + * Returns 0 on success otherwise negative errno. In error the case, dwc + * may contain some buffers allocated but not all which were requested. + */ +static int __devinit dwc3_alloc_event_buffers(struct dwc3 *dwc, unsigned num, + unsigned length) +{ + int i; + + for (i = 0; i < num; i++) { + struct dwc3_event_buffer *evt; + + evt = dwc3_alloc_one_event_buffer(dwc, length); + if (IS_ERR(evt)) { + dev_err(dwc->dev, "can't allocate event buffer\n"); + return PTR_ERR(evt); + } + dwc->ev_buffs[i] = evt; + } + + return 0; +} + +/** + * dwc3_event_buffers_setup - setup our allocated event buffers + * @dwc: Pointer to out controller context structure + * + * Returns 0 on success otherwise negative errno. + */ +static int __devinit dwc3_event_buffers_setup(struct dwc3 *dwc) +{ + struct dwc3_event_buffer *evt; + int n; + + for (n = 0; n < DWC3_EVENT_BUFFERS_NUM; n++) { + evt = dwc->ev_buffs[n]; + dev_dbg(dwc->dev, "Event buf %p dma %08llx length %d\n", + evt->buf, (unsigned long long) evt->dma, + evt->length); + + dwc3_writel(dwc->regs, DWC3_GEVNTADRLO(n), + lower_32_bits(evt->dma)); + dwc3_writel(dwc->regs, DWC3_GEVNTADRHI(n), + upper_32_bits(evt->dma)); + dwc3_writel(dwc->regs, DWC3_GEVNTSIZ(n), + evt->length & 0xffff); + dwc3_writel(dwc->regs, DWC3_GEVNTCOUNT(n), 0); + } + + return 0; +} + +static void dwc3_event_buffers_cleanup(struct dwc3 *dwc) +{ + struct dwc3_event_buffer *evt; + int n; + + for (n = 0; n < DWC3_EVENT_BUFFERS_NUM; n++) { + evt = dwc->ev_buffs[n]; + dwc3_writel(dwc->regs, DWC3_GEVNTADRLO(n), 0); + dwc3_writel(dwc->regs, DWC3_GEVNTADRHI(n), 0); + dwc3_writel(dwc->regs, DWC3_GEVNTSIZ(n), 0); + dwc3_writel(dwc->regs, DWC3_GEVNTCOUNT(n), 0); + } +} + +static void __devinit dwc3_cache_hwparams(struct dwc3 *dwc) +{ + struct dwc3_hwparams *parms = &dwc->hwparams; + + parms->hwparams0 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS0); + parms->hwparams1 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS1); + parms->hwparams2 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS2); + parms->hwparams3 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS3); + parms->hwparams4 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS4); + parms->hwparams5 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS5); + parms->hwparams6 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS6); + parms->hwparams7 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS7); + parms->hwparams8 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS8); +} + +/** + * dwc3_core_init - Low-level initialization of DWC3 Core + * @dwc: Pointer to our controller context structure + * + * Returns 0 on success otherwise negative errno. + */ +static int __devinit dwc3_core_init(struct dwc3 *dwc) +{ + unsigned long timeout; + u32 reg; + int ret; + + reg = dwc3_readl(dwc->regs, DWC3_GSNPSID); + /* This should read as U3 followed by revision number */ + if ((reg & DWC3_GSNPSID_MASK) != 0x55330000) { + dev_err(dwc->dev, "this is not a DesignWare USB3 DRD Core\n"); + ret = -ENODEV; + goto err0; + } + dwc->revision = reg & DWC3_GSNPSREV_MASK; + + dwc3_core_soft_reset(dwc); + + /* issue device SoftReset too */ + timeout = jiffies + msecs_to_jiffies(500); + dwc3_writel(dwc->regs, DWC3_DCTL, DWC3_DCTL_CSFTRST); + do { + reg = dwc3_readl(dwc->regs, DWC3_DCTL); + if (!(reg & DWC3_DCTL_CSFTRST)) + break; + + if (time_after(jiffies, timeout)) { + dev_err(dwc->dev, "Reset Timed Out\n"); + ret = -ETIMEDOUT; + goto err0; + } + + cpu_relax(); + } while (true); + + ret = dwc3_alloc_event_buffers(dwc, DWC3_EVENT_BUFFERS_NUM, + DWC3_EVENT_BUFFERS_SIZE); + if (ret) { + dev_err(dwc->dev, "failed to allocate event buffers\n"); + ret = -ENOMEM; + goto err1; + } + + ret = dwc3_event_buffers_setup(dwc); + if (ret) { + dev_err(dwc->dev, "failed to setup event buffers\n"); + goto err1; + } + + dwc3_cache_hwparams(dwc); + + return 0; + +err1: + dwc3_free_event_buffers(dwc); + +err0: + return ret; +} + +static void dwc3_core_exit(struct dwc3 *dwc) +{ + dwc3_event_buffers_cleanup(dwc); + dwc3_free_event_buffers(dwc); +} + +#define DWC3_ALIGN_MASK (16 - 1) + +static int __devinit dwc3_probe(struct platform_device *pdev) +{ + const struct platform_device_id *id = platform_get_device_id(pdev); + struct resource *res; + struct dwc3 *dwc; + void __iomem *regs; + unsigned int features = id->driver_data; + int ret = -ENOMEM; + int irq; + void *mem; + + mem = kzalloc(sizeof(*dwc) + DWC3_ALIGN_MASK, GFP_KERNEL); + if (!mem) { + dev_err(&pdev->dev, "not enough memory\n"); + goto err0; + } + dwc = PTR_ALIGN(mem, DWC3_ALIGN_MASK + 1); + dwc->mem = mem; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(&pdev->dev, "missing resource\n"); + goto err1; + } + + res = request_mem_region(res->start, resource_size(res), + dev_name(&pdev->dev)); + if (!res) { + dev_err(&pdev->dev, "can't request mem region\n"); + goto err1; + } + + regs = ioremap(res->start, resource_size(res)); + if (!regs) { + dev_err(&pdev->dev, "ioremap failed\n"); + goto err2; + } + + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + dev_err(&pdev->dev, "missing IRQ\n"); + goto err3; + } + + spin_lock_init(&dwc->lock); + platform_set_drvdata(pdev, dwc); + + dwc->regs = regs; + dwc->regs_size = resource_size(res); + dwc->dev = &pdev->dev; + dwc->irq = irq; + + pm_runtime_enable(&pdev->dev); + pm_runtime_get_sync(&pdev->dev); + pm_runtime_forbid(&pdev->dev); + + ret = dwc3_core_init(dwc); + if (ret) { + dev_err(&pdev->dev, "failed to initialize core\n"); + goto err3; + } + + if (features & DWC3_HAS_PERIPHERAL) { + ret = dwc3_gadget_init(dwc); + if (ret) { + dev_err(&pdev->dev, "failed to initialized gadget\n"); + goto err4; + } + } + + ret = dwc3_debugfs_init(dwc); + if (ret) { + dev_err(&pdev->dev, "failed to initialize debugfs\n"); + goto err5; + } + + pm_runtime_allow(&pdev->dev); + + return 0; + +err5: + if (features & DWC3_HAS_PERIPHERAL) + dwc3_gadget_exit(dwc); + +err4: + dwc3_core_exit(dwc); + +err3: + iounmap(regs); + +err2: + release_mem_region(res->start, resource_size(res)); + +err1: + kfree(dwc->mem); + +err0: + return ret; +} + +static int __devexit dwc3_remove(struct platform_device *pdev) +{ + const struct platform_device_id *id = platform_get_device_id(pdev); + struct dwc3 *dwc = platform_get_drvdata(pdev); + struct resource *res; + unsigned int features = id->driver_data; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + + pm_runtime_put(&pdev->dev); + pm_runtime_disable(&pdev->dev); + + dwc3_debugfs_exit(dwc); + + if (features & DWC3_HAS_PERIPHERAL) + dwc3_gadget_exit(dwc); + + dwc3_core_exit(dwc); + release_mem_region(res->start, resource_size(res)); + iounmap(dwc->regs); + kfree(dwc->mem); + + return 0; +} + +static const struct platform_device_id dwc3_id_table[] __devinitconst = { + { + .name = "dwc3-omap", + .driver_data = (DWC3_HAS_PERIPHERAL + | DWC3_HAS_XHCI + | DWC3_HAS_OTG), + }, + { + .name = "dwc3-pci", + .driver_data = DWC3_HAS_PERIPHERAL, + }, + { }, /* Terminating Entry */ +}; +MODULE_DEVICE_TABLE(platform, dwc3_id_table); + +static struct platform_driver dwc3_driver = { + .probe = dwc3_probe, + .remove = __devexit_p(dwc3_remove), + .driver = { + .name = "dwc3", + }, + .id_table = dwc3_id_table, +}; + +MODULE_AUTHOR("Felipe Balbi <balbi@ti.com>"); +MODULE_LICENSE("Dual BSD/GPL"); +MODULE_DESCRIPTION("DesignWare USB3 DRD Controller Driver"); + +static int __devinit dwc3_init(void) +{ + return platform_driver_register(&dwc3_driver); +} +module_init(dwc3_init); + +static void __exit dwc3_exit(void) +{ + platform_driver_unregister(&dwc3_driver); +} +module_exit(dwc3_exit); diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h new file mode 100644 index 000000000000..29a8e1679e12 --- /dev/null +++ b/drivers/usb/dwc3/core.h @@ -0,0 +1,768 @@ +/** + * core.h - DesignWare USB3 DRD Core Header + * + * Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com + * + * Authors: Felipe Balbi <balbi@ti.com>, + * Sebastian Andrzej Siewior <bigeasy@linutronix.de> + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. The names of the above-listed copyright holders may not be used + * to endorse or promote products derived from this software without + * specific prior written permission. + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2, as published by the Free + * Software Foundation. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS + * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, + * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR + * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR + * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, + * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, + * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR + * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef __DRIVERS_USB_DWC3_CORE_H +#define __DRIVERS_USB_DWC3_CORE_H + +#include <linux/device.h> +#include <linux/spinlock.h> +#include <linux/list.h> +#include <linux/dma-mapping.h> +#include <linux/mm.h> +#include <linux/debugfs.h> + +#include <linux/usb/ch9.h> +#include <linux/usb/gadget.h> + +/* Global constants */ +#define DWC3_ENDPOINTS_NUM 32 + +#define DWC3_EVENT_BUFFERS_NUM 2 +#define DWC3_EVENT_BUFFERS_SIZE PAGE_SIZE +#define DWC3_EVENT_TYPE_MASK 0xfe + +#define DWC3_EVENT_TYPE_DEV 0 +#define DWC3_EVENT_TYPE_CARKIT 3 +#define DWC3_EVENT_TYPE_I2C 4 + +#define DWC3_DEVICE_EVENT_DISCONNECT 0 +#define DWC3_DEVICE_EVENT_RESET 1 +#define DWC3_DEVICE_EVENT_CONNECT_DONE 2 +#define DWC3_DEVICE_EVENT_LINK_STATUS_CHANGE 3 +#define DWC3_DEVICE_EVENT_WAKEUP 4 +#define DWC3_DEVICE_EVENT_EOPF 6 +#define DWC3_DEVICE_EVENT_SOF 7 +#define DWC3_DEVICE_EVENT_ERRATIC_ERROR 9 +#define DWC3_DEVICE_EVENT_CMD_CMPL 10 +#define DWC3_DEVICE_EVENT_OVERFLOW 11 + +#define DWC3_GEVNTCOUNT_MASK 0xfffc +#define DWC3_GSNPSID_MASK 0xffff0000 +#define DWC3_GSNPSREV_MASK 0xffff + +/* Global Registers */ +#define DWC3_GSBUSCFG0 0xc100 +#define DWC3_GSBUSCFG1 0xc104 +#define DWC3_GTXTHRCFG 0xc108 +#define DWC3_GRXTHRCFG 0xc10c +#define DWC3_GCTL 0xc110 +#define DWC3_GEVTEN 0xc114 +#define DWC3_GSTS 0xc118 +#define DWC3_GSNPSID 0xc120 +#define DWC3_GGPIO 0xc124 +#define DWC3_GUID 0xc128 +#define DWC3_GUCTL 0xc12c +#define DWC3_GBUSERRADDR0 0xc130 +#define DWC3_GBUSERRADDR1 0xc134 +#define DWC3_GPRTBIMAP0 0xc138 +#define DWC3_GPRTBIMAP1 0xc13c +#define DWC3_GHWPARAMS0 0xc140 +#define DWC3_GHWPARAMS1 0xc144 +#define DWC3_GHWPARAMS2 0xc148 +#define DWC3_GHWPARAMS3 0xc14c +#define DWC3_GHWPARAMS4 0xc150 +#define DWC3_GHWPARAMS5 0xc154 +#define DWC3_GHWPARAMS6 0xc158 +#define DWC3_GHWPARAMS7 0xc15c +#define DWC3_GDBGFIFOSPACE 0xc160 +#define DWC3_GDBGLTSSM 0xc164 +#define DWC3_GPRTBIMAP_HS0 0xc180 +#define DWC3_GPRTBIMAP_HS1 0xc184 +#define DWC3_GPRTBIMAP_FS0 0xc188 +#define DWC3_GPRTBIMAP_FS1 0xc18c + +#define DWC3_GUSB2PHYCFG(n) (0xc200 + (n * 0x04)) +#define DWC3_GUSB2I2CCTL(n) (0xc240 + (n * 0x04)) + +#define DWC3_GUSB2PHYACC(n) (0xc280 + (n * 0x04)) + +#define DWC3_GUSB3PIPECTL(n) (0xc2c0 + (n * 0x04)) + +#define DWC3_GTXFIFOSIZ(n) (0xc300 + (n * 0x04)) +#define DWC3_GRXFIFOSIZ(n) (0xc380 + (n * 0x04)) + +#define DWC3_GEVNTADRLO(n) (0xc400 + (n * 0x10)) +#define DWC3_GEVNTADRHI(n) (0xc404 + (n * 0x10)) +#define DWC3_GEVNTSIZ(n) (0xc408 + (n * 0x10)) +#define DWC3_GEVNTCOUNT(n) (0xc40c + (n * 0x10)) + +#define DWC3_GHWPARAMS8 0xc600 + +/* Device Registers */ +#define DWC3_DCFG 0xc700 +#define DWC3_DCTL 0xc704 +#define DWC3_DEVTEN 0xc708 +#define DWC3_DSTS 0xc70c +#define DWC3_DGCMDPAR 0xc710 +#define DWC3_DGCMD 0xc714 +#define DWC3_DALEPENA 0xc720 +#define DWC3_DEPCMDPAR2(n) (0xc800 + (n * 0x10)) +#define DWC3_DEPCMDPAR1(n) (0xc804 + (n * 0x10)) +#define DWC3_DEPCMDPAR0(n) (0xc808 + (n * 0x10)) +#define DWC3_DEPCMD(n) (0xc80c + (n * 0x10)) + +/* OTG Registers */ +#define DWC3_OCFG 0xcc00 +#define DWC3_OCTL 0xcc04 +#define DWC3_OEVTEN 0xcc08 +#define DWC3_OSTS 0xcc0C + +/* Bit fields */ + +/* Global Configuration Register */ +#define DWC3_GCTL_PWRDNSCALE(n) (n << 19) +#define DWC3_GCTL_U2RSTECN (1 << 16) +#define DWC3_GCTL_RAMCLKSEL(x) ((x & DWC3_GCTL_CLK_MASK) << 6) +#define DWC3_GCTL_CLK_BUS (0) +#define DWC3_GCTL_CLK_PIPE (1) +#define DWC3_GCTL_CLK_PIPEHALF (2) +#define DWC3_GCTL_CLK_MASK (3) + +#define DWC3_GCTL_PRTCAPDIR(n) (n << 12) +#define DWC3_GCTL_PRTCAP_HOST 1 +#define DWC3_GCTL_PRTCAP_DEVICE 2 +#define DWC3_GCTL_PRTCAP_OTG 3 + +#define DWC3_GCTL_CORESOFTRESET (1 << 11) +#define DWC3_GCTL_SCALEDOWN(n) (n << 4) +#define DWC3_GCTL_DISSCRAMBLE (1 << 3) +#define DWC3_GCTL_DSBLCLKGTNG (1 << 0) + +/* Global USB2 PHY Configuration Register */ +#define DWC3_GUSB2PHYCFG_PHYSOFTRST (1 << 31) +#define DWC3_GUSB2PHYCFG_SUSPHY (1 << 6) + +/* Global USB3 PIPE Control Register */ +#define DWC3_GUSB3PIPECTL_PHYSOFTRST (1 << 31) +#define DWC3_GUSB3PIPECTL_SUSPHY (1 << 17) + +/* Global HWPARAMS1 Register */ +#define DWC3_GHWPARAMS1_EN_PWROPT(n) ((n & (3 << 24)) >> 24) +#define DWC3_GHWPARAMS1_EN_PWROPT_NO 0 +#define DWC3_GHWPARAMS1_EN_PWROPT_CLK 1 + +/* Device Configuration Register */ +#define DWC3_DCFG_DEVADDR(addr) ((addr) << 3) +#define DWC3_DCFG_DEVADDR_MASK DWC3_DCFG_DEVADDR(0x7f) + +#define DWC3_DCFG_SPEED_MASK (7 << 0) +#define DWC3_DCFG_SUPERSPEED (4 << 0) +#define DWC3_DCFG_HIGHSPEED (0 << 0) +#define DWC3_DCFG_FULLSPEED2 (1 << 0) +#define DWC3_DCFG_LOWSPEED (2 << 0) +#define DWC3_DCFG_FULLSPEED1 (3 << 0) + +/* Device Control Register */ +#define DWC3_DCTL_RUN_STOP (1 << 31) +#define DWC3_DCTL_CSFTRST (1 << 30) +#define DWC3_DCTL_LSFTRST (1 << 29) + +#define DWC3_DCTL_HIRD_THRES_MASK (0x1f << 24) +#define DWC3_DCTL_HIRD_THRES(n) (((n) & DWC3_DCTL_HIRD_THRES_MASK) >> 24) + +#define DWC3_DCTL_APPL1RES (1 << 23) + +#define DWC3_DCTL_INITU2ENA (1 << 12) +#define DWC3_DCTL_ACCEPTU2ENA (1 << 11) +#define DWC3_DCTL_INITU1ENA (1 << 10) +#define DWC3_DCTL_ACCEPTU1ENA (1 << 9) +#define DWC3_DCTL_TSTCTRL_MASK (0xf << 1) + +#define DWC3_DCTL_ULSTCHNGREQ_MASK (0x0f << 5) +#define DWC3_DCTL_ULSTCHNGREQ(n) (((n) << 5) & DWC3_DCTL_ULSTCHNGREQ_MASK) + +#define DWC3_DCTL_ULSTCHNG_NO_ACTION (DWC3_DCTL_ULSTCHNGREQ(0)) +#define DWC3_DCTL_ULSTCHNG_SS_DISABLED (DWC3_DCTL_ULSTCHNGREQ(4)) +#define DWC3_DCTL_ULSTCHNG_RX_DETECT (DWC3_DCTL_ULSTCHNGREQ(5)) +#define DWC3_DCTL_ULSTCHNG_SS_INACTIVE (DWC3_DCTL_ULSTCHNGREQ(6)) +#define DWC3_DCTL_ULSTCHNG_RECOVERY (DWC3_DCTL_ULSTCHNGREQ(8)) +#define DWC3_DCTL_ULSTCHNG_COMPLIANCE (DWC3_DCTL_ULSTCHNGREQ(10)) +#define DWC3_DCTL_ULSTCHNG_LOOPBACK (DWC3_DCTL_ULSTCHNGREQ(11)) + +/* Device Event Enable Register */ +#define DWC3_DEVTEN_VNDRDEVTSTRCVEDEN (1 << 12) +#define DWC3_DEVTEN_EVNTOVERFLOWEN (1 << 11) +#define DWC3_DEVTEN_CMDCMPLTEN (1 << 10) +#define DWC3_DEVTEN_ERRTICERREN (1 << 9) +#define DWC3_DEVTEN_SOFEN (1 << 7) +#define DWC3_DEVTEN_EOPFEN (1 << 6) +#define DWC3_DEVTEN_WKUPEVTEN (1 << 4) +#define DWC3_DEVTEN_ULSTCNGEN (1 << 3) +#define DWC3_DEVTEN_CONNECTDONEEN (1 << 2) +#define DWC3_DEVTEN_USBRSTEN (1 << 1) +#define DWC3_DEVTEN_DISCONNEVTEN (1 << 0) + +/* Device Status Register */ +#define DWC3_DSTS_PWRUPREQ (1 << 24) +#define DWC3_DSTS_COREIDLE (1 << 23) +#define DWC3_DSTS_DEVCTRLHLT (1 << 22) + +#define DWC3_DSTS_USBLNKST_MASK (0x0f << 18) +#define DWC3_DSTS_USBLNKST(n) (((n) & DWC3_DSTS_USBLNKST_MASK) >> 18) + +#define DWC3_DSTS_RXFIFOEMPTY (1 << 17) + +#define DWC3_DSTS_SOFFN_MASK (0x3ff << 3) +#define DWC3_DSTS_SOFFN(n) (((n) & DWC3_DSTS_SOFFN_MASK) >> 3) + +#define DWC3_DSTS_CONNECTSPD (7 << 0) + +#define DWC3_DSTS_SUPERSPEED (4 << 0) +#define DWC3_DSTS_HIGHSPEED (0 << 0) +#define DWC3_DSTS_FULLSPEED2 (1 << 0) +#define DWC3_DSTS_LOWSPEED (2 << 0) +#define DWC3_DSTS_FULLSPEED1 (3 << 0) + +/* Device Generic Command Register */ +#define DWC3_DGCMD_SET_LMP 0x01 +#define DWC3_DGCMD_SET_PERIODIC_PAR 0x02 +#define DWC3_DGCMD_XMIT_FUNCTION 0x03 +#define DWC3_DGCMD_SELECTED_FIFO_FLUSH 0x09 +#define DWC3_DGCMD_ALL_FIFO_FLUSH 0x0a +#define DWC3_DGCMD_SET_ENDPOINT_NRDY 0x0c +#define DWC3_DGCMD_RUN_SOC_BUS_LOOPBACK 0x10 + +/* Device Endpoint Command Register */ +#define DWC3_DEPCMD_PARAM_SHIFT 16 +#define DWC3_DEPCMD_PARAM(x) (x << DWC3_DEPCMD_PARAM_SHIFT) +#define DWC3_DEPCMD_GET_RSC_IDX(x) ((x >> DWC3_DEPCMD_PARAM_SHIFT) & 0x7f) +#define DWC3_DEPCMD_STATUS_MASK (0x0f << 12) +#define DWC3_DEPCMD_STATUS(x) ((x & DWC3_DEPCMD_STATUS_MASK) >> 12) +#define DWC3_DEPCMD_HIPRI_FORCERM (1 << 11) +#define DWC3_DEPCMD_CMDACT (1 << 10) +#define DWC3_DEPCMD_CMDIOC (1 << 8) + +#define DWC3_DEPCMD_DEPSTARTCFG (0x09 << 0) +#define DWC3_DEPCMD_ENDTRANSFER (0x08 << 0) +#define DWC3_DEPCMD_UPDATETRANSFER (0x07 << 0) +#define DWC3_DEPCMD_STARTTRANSFER (0x06 << 0) +#define DWC3_DEPCMD_CLEARSTALL (0x05 << 0) +#define DWC3_DEPCMD_SETSTALL (0x04 << 0) +#define DWC3_DEPCMD_GETSEQNUMBER (0x03 << 0) +#define DWC3_DEPCMD_SETTRANSFRESOURCE (0x02 << 0) +#define DWC3_DEPCMD_SETEPCONFIG (0x01 << 0) + +/* The EP number goes 0..31 so ep0 is always out and ep1 is always in */ +#define DWC3_DALEPENA_EP(n) (1 << n) + +#define DWC3_DEPCMD_TYPE_CONTROL 0 +#define DWC3_DEPCMD_TYPE_ISOC 1 +#define DWC3_DEPCMD_TYPE_BULK 2 +#define DWC3_DEPCMD_TYPE_INTR 3 + +/* Structures */ + +struct dwc3_trb_hw; + +/** + * struct dwc3_event_buffer - Software event buffer representation + * @list: a list of event buffers + * @buf: _THE_ buffer + * @length: size of this buffer + * @dma: dma_addr_t + * @dwc: pointer to DWC controller + */ +struct dwc3_event_buffer { + void *buf; + unsigned length; + unsigned int lpos; + + dma_addr_t dma; + + struct dwc3 *dwc; +}; + +#define DWC3_EP_FLAG_STALLED (1 << 0) +#define DWC3_EP_FLAG_WEDGED (1 << 1) + +#define DWC3_EP_DIRECTION_TX true +#define DWC3_EP_DIRECTION_RX false + +#define DWC3_TRB_NUM 32 +#define DWC3_TRB_MASK (DWC3_TRB_NUM - 1) + +/** + * struct dwc3_ep - device side endpoint representation + * @endpoint: usb endpoint + * @request_list: list of requests for this endpoint + * @req_queued: list of requests on this ep which have TRBs setup + * @trb_pool: array of transaction buffers + * @trb_pool_dma: dma address of @trb_pool + * @free_slot: next slot which is going to be used + * @busy_slot: first slot which is owned by HW + * @desc: usb_endpoint_descriptor pointer + * @dwc: pointer to DWC controller + * @flags: endpoint flags (wedged, stalled, ...) + * @current_trb: index of current used trb + * @number: endpoint number (1 - 15) + * @type: set to bmAttributes & USB_ENDPOINT_XFERTYPE_MASK + * @res_trans_idx: Resource transfer index + * @interval: the intervall on which the ISOC transfer is started + * @name: a human readable name e.g. ep1out-bulk + * @direction: true for TX, false for RX + * @stream_capable: true when streams are enabled + */ +struct dwc3_ep { + struct usb_ep endpoint; + struct list_head request_list; + struct list_head req_queued; + + struct dwc3_trb_hw *trb_pool; + dma_addr_t trb_pool_dma; + u32 free_slot; + u32 busy_slot; + const struct usb_endpoint_descriptor *desc; + struct dwc3 *dwc; + + unsigned flags; +#define DWC3_EP_ENABLED (1 << 0) +#define DWC3_EP_STALL (1 << 1) +#define DWC3_EP_WEDGE (1 << 2) +#define DWC3_EP_BUSY (1 << 4) +#define DWC3_EP_PENDING_REQUEST (1 << 5) + + /* This last one is specific to EP0 */ +#define DWC3_EP0_DIR_IN (1 << 31) + + unsigned current_trb; + + u8 number; + u8 type; + u8 res_trans_idx; + u32 interval; + + char name[20]; + + unsigned direction:1; + unsigned stream_capable:1; +}; + +enum dwc3_phy { + DWC3_PHY_UNKNOWN = 0, + DWC3_PHY_USB3, + DWC3_PHY_USB2, +}; + +enum dwc3_ep0_next { + DWC3_EP0_UNKNOWN = 0, + DWC3_EP0_COMPLETE, + DWC3_EP0_NRDY_SETUP, + DWC3_EP0_NRDY_DATA, + DWC3_EP0_NRDY_STATUS, +}; + +enum dwc3_ep0_state { + EP0_UNCONNECTED = 0, + EP0_SETUP_PHASE, + EP0_DATA_PHASE, + EP0_STATUS_PHASE, +}; + +enum dwc3_link_state { + /* In SuperSpeed */ + DWC3_LINK_STATE_U0 = 0x00, /* in HS, means ON */ + DWC3_LINK_STATE_U1 = 0x01, + DWC3_LINK_STATE_U2 = 0x02, /* in HS, means SLEEP */ + DWC3_LINK_STATE_U3 = 0x03, /* in HS, means SUSPEND */ + DWC3_LINK_STATE_SS_DIS = 0x04, + DWC3_LINK_STATE_RX_DET = 0x05, /* in HS, means Early Suspend */ + DWC3_LINK_STATE_SS_INACT = 0x06, + DWC3_LINK_STATE_POLL = 0x07, + DWC3_LINK_STATE_RECOV = 0x08, + DWC3_LINK_STATE_HRESET = 0x09, + DWC3_LINK_STATE_CMPLY = 0x0a, + DWC3_LINK_STATE_LPBK = 0x0b, + DWC3_LINK_STATE_MASK = 0x0f, +}; + +enum dwc3_device_state { + DWC3_DEFAULT_STATE, + DWC3_ADDRESS_STATE, + DWC3_CONFIGURED_STATE, +}; + +/** + * struct dwc3_trb - transfer request block + * @bpl: lower 32bit of the buffer + * @bph: higher 32bit of the buffer + * @length: buffer size (up to 16mb - 1) + * @pcm1: packet count m1 + * @trbsts: trb status + * 0 = ok + * 1 = missed isoc + * 2 = setup pending + * @hwo: hardware owner of descriptor + * @lst: last trb + * @chn: chain buffers + * @csp: continue on short packets (only supported on isoc eps) + * @trbctl: trb control + * 1 = normal + * 2 = control-setup + * 3 = control-status-2 + * 4 = control-status-3 + * 5 = control-data (first trb of data stage) + * 6 = isochronous-first (first trb of service interval) + * 7 = isochronous + * 8 = link trb + * others = reserved + * @isp_imi: interrupt on short packet / interrupt on missed isoc + * @ioc: interrupt on complete + * @sid_sofn: Stream ID / SOF Number + */ +struct dwc3_trb { + u64 bplh; + + union { + struct { + u32 length:24; + u32 pcm1:2; + u32 reserved27_26:2; + u32 trbsts:4; +#define DWC3_TRB_STS_OKAY 0 +#define DWC3_TRB_STS_MISSED_ISOC 1 +#define DWC3_TRB_STS_SETUP_PENDING 2 + }; + u32 len_pcm; + }; + + union { + struct { + u32 hwo:1; + u32 lst:1; + u32 chn:1; + u32 csp:1; + u32 trbctl:6; + u32 isp_imi:1; + u32 ioc:1; + u32 reserved13_12:2; + u32 sid_sofn:16; + u32 reserved31_30:2; + }; + u32 control; + }; +} __packed; + +/** + * struct dwc3_trb_hw - transfer request block (hw format) + * @bpl: DW0-3 + * @bph: DW4-7 + * @size: DW8-B + * @trl: DWC-F + */ +struct dwc3_trb_hw { + __le32 bpl; + __le32 bph; + __le32 size; + __le32 ctrl; +} __packed; + +static inline void dwc3_trb_to_hw(struct dwc3_trb *nat, struct dwc3_trb_hw *hw) +{ + hw->bpl = cpu_to_le32(lower_32_bits(nat->bplh)); + hw->bph = cpu_to_le32(upper_32_bits(nat->bplh)); + hw->size = cpu_to_le32p(&nat->len_pcm); + /* HWO is written last */ + hw->ctrl = cpu_to_le32p(&nat->control); +} + +static inline void dwc3_trb_to_nat(struct dwc3_trb_hw *hw, struct dwc3_trb *nat) +{ + u64 bplh; + + bplh = le32_to_cpup(&hw->bpl); + bplh |= (u64) le32_to_cpup(&hw->bph) << 32; + nat->bplh = bplh; + + nat->len_pcm = le32_to_cpup(&hw->size); + nat->control = le32_to_cpup(&hw->ctrl); +} + +/** + * dwc3_hwparams - copy of HWPARAMS registers + * @hwparams0 - GHWPARAMS0 + * @hwparams1 - GHWPARAMS1 + * @hwparams2 - GHWPARAMS2 + * @hwparams3 - GHWPARAMS3 + * @hwparams4 - GHWPARAMS4 + * @hwparams5 - GHWPARAMS5 + * @hwparams6 - GHWPARAMS6 + * @hwparams7 - GHWPARAMS7 + * @hwparams8 - GHWPARAMS8 + */ +struct dwc3_hwparams { + u32 hwparams0; + u32 hwparams1; + u32 hwparams2; + u32 hwparams3; + u32 hwparams4; + u32 hwparams5; + u32 hwparams6; + u32 hwparams7; + u32 hwparams8; +}; + +/** + * struct dwc3 - representation of our controller + * @ctrl_req: usb control request which is used for ep0 + * @ep0_trb: trb which is used for the ctrl_req + * @ep0_bounce: bounce buffer for ep0 + * @setup_buf: used while precessing STD USB requests + * @ctrl_req_addr: dma address of ctrl_req + * @ep0_trb: dma address of ep0_trb + * @ep0_usb_req: dummy req used while handling STD USB requests + * @setup_buf_addr: dma address of setup_buf + * @ep0_bounce_addr: dma address of ep0_bounce + * @lock: for synchronizing + * @dev: pointer to our struct device + * @event_buffer_list: a list of event buffers + * @gadget: device side representation of the peripheral controller + * @gadget_driver: pointer to the gadget driver + * @regs: base address for our registers + * @regs_size: address space size + * @irq: IRQ number + * @revision: revision register contents + * @is_selfpowered: true when we are selfpowered + * @three_stage_setup: set if we perform a three phase setup + * @ep0_status_pending: ep0 status response without a req is pending + * @ep0_bounced: true when we used bounce buffer + * @ep0_expect_in: true when we expect a DATA IN transfer + * @start_config_issued: true when StartConfig command has been issued + * @ep0_next_event: hold the next expected event + * @ep0state: state of endpoint zero + * @link_state: link state + * @speed: device speed (super, high, full, low) + * @mem: points to start of memory which is used for this struct. + * @hwparams: copy of hwparams registers + * @root: debugfs root folder pointer + */ +struct dwc3 { + struct usb_ctrlrequest *ctrl_req; + struct dwc3_trb_hw *ep0_trb; + void *ep0_bounce; + u8 *setup_buf; + dma_addr_t ctrl_req_addr; + dma_addr_t ep0_trb_addr; + dma_addr_t setup_buf_addr; + dma_addr_t ep0_bounce_addr; + struct usb_request ep0_usb_req; + /* device lock */ + spinlock_t lock; + struct device *dev; + + struct dwc3_event_buffer *ev_buffs[DWC3_EVENT_BUFFERS_NUM]; + struct dwc3_ep *eps[DWC3_ENDPOINTS_NUM]; + + struct usb_gadget gadget; + struct usb_gadget_driver *gadget_driver; + + void __iomem *regs; + size_t regs_size; + + int irq; + + u32 revision; + +#define DWC3_REVISION_173A 0x5533173a +#define DWC3_REVISION_175A 0x5533175a +#define DWC3_REVISION_180A 0x5533180a +#define DWC3_REVISION_183A 0x5533183a +#define DWC3_REVISION_185A 0x5533185a +#define DWC3_REVISION_188A 0x5533188a +#define DWC3_REVISION_190A 0x5533190a + + unsigned is_selfpowered:1; + unsigned three_stage_setup:1; + unsigned ep0_status_pending:1; + unsigned ep0_bounced:1; + unsigned ep0_expect_in:1; + unsigned start_config_issued:1; + + enum dwc3_ep0_next ep0_next_event; + enum dwc3_ep0_state ep0state; + enum dwc3_link_state link_state; + enum dwc3_device_state dev_state; + + u8 speed; + void *mem; + + struct dwc3_hwparams hwparams; + struct dentry *root; +}; + +/* -------------------------------------------------------------------------- */ + +#define DWC3_TRBSTS_OK 0 +#define DWC3_TRBSTS_MISSED_ISOC 1 +#define DWC3_TRBSTS_SETUP_PENDING 2 + +#define DWC3_TRBCTL_NORMAL 1 +#define DWC3_TRBCTL_CONTROL_SETUP 2 +#define DWC3_TRBCTL_CONTROL_STATUS2 3 +#define DWC3_TRBCTL_CONTROL_STATUS3 4 +#define DWC3_TRBCTL_CONTROL_DATA 5 +#define DWC3_TRBCTL_ISOCHRONOUS_FIRST 6 +#define DWC3_TRBCTL_ISOCHRONOUS 7 +#define DWC3_TRBCTL_LINK_TRB 8 + +/* -------------------------------------------------------------------------- */ + +struct dwc3_event_type { + u32 is_devspec:1; + u32 type:6; + u32 reserved8_31:25; +} __packed; + +#define DWC3_DEPEVT_XFERCOMPLETE 0x01 +#define DWC3_DEPEVT_XFERINPROGRESS 0x02 +#define DWC3_DEPEVT_XFERNOTREADY 0x03 +#define DWC3_DEPEVT_RXTXFIFOEVT 0x04 +#define DWC3_DEPEVT_STREAMEVT 0x06 +#define DWC3_DEPEVT_EPCMDCMPLT 0x07 + +/** + * struct dwc3_event_depvt - Device Endpoint Events + * @one_bit: indicates this is an endpoint event (not used) + * @endpoint_number: number of the endpoint + * @endpoint_event: The event we have: + * 0x00 - Reserved + * 0x01 - XferComplete + * 0x02 - XferInProgress + * 0x03 - XferNotReady + * 0x04 - RxTxFifoEvt (IN->Underrun, OUT->Overrun) + * 0x05 - Reserved + * 0x06 - StreamEvt + * 0x07 - EPCmdCmplt + * @reserved11_10: Reserved, don't use. + * @status: Indicates the status of the event. Refer to databook for + * more information. + * @parameters: Parameters of the current event. Refer to databook for + * more information. + */ +struct dwc3_event_depevt { + u32 one_bit:1; + u32 endpoint_number:5; + u32 endpoint_event:4; + u32 reserved11_10:2; + u32 status:4; +#define DEPEVT_STATUS_BUSERR (1 << 0) +#define DEPEVT_STATUS_SHORT (1 << 1) +#define DEPEVT_STATUS_IOC (1 << 2) +#define DEPEVT_STATUS_LST (1 << 3) + +/* Stream event only */ +#define DEPEVT_STREAMEVT_FOUND 1 +#define DEPEVT_STREAMEVT_NOTFOUND 2 + +/* Control-only Status */ +#define DEPEVT_STATUS_CONTROL_SETUP 0 +#define DEPEVT_STATUS_CONTROL_DATA 1 +#define DEPEVT_STATUS_CONTROL_STATUS 2 + + u32 parameters:16; +} __packed; + +/** + * struct dwc3_event_devt - Device Events + * @one_bit: indicates this is a non-endpoint event (not used) + * @device_event: indicates it's a device event. Should read as 0x00 + * @type: indicates the type of device event. + * 0 - DisconnEvt + * 1 - USBRst + * 2 - ConnectDone + * 3 - ULStChng + * 4 - WkUpEvt + * 5 - Reserved + * 6 - EOPF + * 7 - SOF + * 8 - Reserved + * 9 - ErrticErr + * 10 - CmdCmplt + * 11 - EvntOverflow + * 12 - VndrDevTstRcved + * @reserved15_12: Reserved, not used + * @event_info: Information about this event + * @reserved31_24: Reserved, not used + */ +struct dwc3_event_devt { + u32 one_bit:1; + u32 device_event:7; + u32 type:4; + u32 reserved15_12:4; + u32 event_info:8; + u32 reserved31_24:8; +} __packed; + +/** + * struct dwc3_event_gevt - Other Core Events + * @one_bit: indicates this is a non-endpoint event (not used) + * @device_event: indicates it's (0x03) Carkit or (0x04) I2C event. + * @phy_port_number: self-explanatory + * @reserved31_12: Reserved, not used. + */ +struct dwc3_event_gevt { + u32 one_bit:1; + u32 device_event:7; + u32 phy_port_number:4; + u32 reserved31_12:20; +} __packed; + +/** + * union dwc3_event - representation of Event Buffer contents + * @raw: raw 32-bit event + * @type: the type of the event + * @depevt: Device Endpoint Event + * @devt: Device Event + * @gevt: Global Event + */ +union dwc3_event { + u32 raw; + struct dwc3_event_type type; + struct dwc3_event_depevt depevt; + struct dwc3_event_devt devt; + struct dwc3_event_gevt gevt; +}; + +/* + * DWC3 Features to be used as Driver Data + */ + +#define DWC3_HAS_PERIPHERAL BIT(0) +#define DWC3_HAS_XHCI BIT(1) +#define DWC3_HAS_OTG BIT(3) + +#endif /* __DRIVERS_USB_DWC3_CORE_H */ diff --git a/drivers/usb/dwc3/debug.h b/drivers/usb/dwc3/debug.h new file mode 100644 index 000000000000..5894ee8222af --- /dev/null +++ b/drivers/usb/dwc3/debug.h @@ -0,0 +1,50 @@ +/** + * debug.h - DesignWare USB3 DRD Controller Debug Header + * + * Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com + * + * Authors: Felipe Balbi <balbi@ti.com>, + * Sebastian Andrzej Siewior <bigeasy@linutronix.de> + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. The names of the above-listed copyright holders may not be used + * to endorse or promote products derived from this software without + * specific prior written permission. + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2, as published by the Free + * Software Foundation. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS + * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, + * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR + * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR + * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, + * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, + * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR + * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include "core.h" + +#ifdef CONFIG_DEBUG_FS +extern int dwc3_debugfs_init(struct dwc3 *); +extern void dwc3_debugfs_exit(struct dwc3 *); +#else +static inline int dwc3_debugfs_init(struct dwc3 *d) +{ return 0; } +static inline void dwc3_debugfs_exit(struct dwc3 *d) +{ } +#endif + diff --git a/drivers/usb/dwc3/debugfs.c b/drivers/usb/dwc3/debugfs.c new file mode 100644 index 000000000000..da1ad77d8d51 --- /dev/null +++ b/drivers/usb/dwc3/debugfs.c @@ -0,0 +1,441 @@ +/** + * debugfs.c - DesignWare USB3 DRD Controller DebugFS file + * + * Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com + * + * Authors: Felipe Balbi <balbi@ti.com>, + * Sebastian Andrzej Siewior <bigeasy@linutronix.de> + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. The names of the above-listed copyright holders may not be used + * to endorse or promote products derived from this software without + * specific prior written permission. + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2, as published by the Free + * Software Foundation. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS + * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, + * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR + * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR + * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, + * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, + * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR + * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/ptrace.h> +#include <linux/types.h> +#include <linux/spinlock.h> +#include <linux/debugfs.h> +#include <linux/seq_file.h> +#include <linux/delay.h> + +#include <asm/uaccess.h> + +#include "core.h" +#include "gadget.h" +#include "io.h" + +struct dwc3_register { + const char *name; + u32 offset; +}; + +#define dump_register(nm) \ +{ \ + .name = __stringify(nm), \ + .offset = DWC3_ ##nm, \ +} + +static const struct dwc3_register dwc3_regs[] = { + dump_register(GSBUSCFG0), + dump_register(GSBUSCFG1), + dump_register(GTXTHRCFG), + dump_register(GRXTHRCFG), + dump_register(GCTL), + dump_register(GEVTEN), + dump_register(GSTS), + dump_register(GSNPSID), + dump_register(GGPIO), + dump_register(GUID), + dump_register(GUCTL), + dump_register(GBUSERRADDR0), + dump_register(GBUSERRADDR1), + dump_register(GPRTBIMAP0), + dump_register(GPRTBIMAP1), + dump_register(GHWPARAMS0), + dump_register(GHWPARAMS1), + dump_register(GHWPARAMS2), + dump_register(GHWPARAMS3), + dump_register(GHWPARAMS4), + dump_register(GHWPARAMS5), + dump_register(GHWPARAMS6), + dump_register(GHWPARAMS7), + dump_register(GDBGFIFOSPACE), + dump_register(GDBGLTSSM), + dump_register(GPRTBIMAP_HS0), + dump_register(GPRTBIMAP_HS1), + dump_register(GPRTBIMAP_FS0), + dump_register(GPRTBIMAP_FS1), + + dump_register(GUSB2PHYCFG(0)), + dump_register(GUSB2PHYCFG(1)), + dump_register(GUSB2PHYCFG(2)), + dump_register(GUSB2PHYCFG(3)), + dump_register(GUSB2PHYCFG(4)), + dump_register(GUSB2PHYCFG(5)), + dump_register(GUSB2PHYCFG(6)), + dump_register(GUSB2PHYCFG(7)), + dump_register(GUSB2PHYCFG(8)), + dump_register(GUSB2PHYCFG(9)), + dump_register(GUSB2PHYCFG(10)), + dump_register(GUSB2PHYCFG(11)), + dump_register(GUSB2PHYCFG(12)), + dump_register(GUSB2PHYCFG(13)), + dump_register(GUSB2PHYCFG(14)), + dump_register(GUSB2PHYCFG(15)), + + dump_register(GUSB2I2CCTL(0)), + dump_register(GUSB2I2CCTL(1)), + dump_register(GUSB2I2CCTL(2)), + dump_register(GUSB2I2CCTL(3)), + dump_register(GUSB2I2CCTL(4)), + dump_register(GUSB2I2CCTL(5)), + dump_register(GUSB2I2CCTL(6)), + dump_register(GUSB2I2CCTL(7)), + dump_register(GUSB2I2CCTL(8)), + dump_register(GUSB2I2CCTL(9)), + dump_register(GUSB2I2CCTL(10)), + dump_register(GUSB2I2CCTL(11)), + dump_register(GUSB2I2CCTL(12)), + dump_register(GUSB2I2CCTL(13)), + dump_register(GUSB2I2CCTL(14)), + dump_register(GUSB2I2CCTL(15)), + + dump_register(GUSB2PHYACC(0)), + dump_register(GUSB2PHYACC(1)), + dump_register(GUSB2PHYACC(2)), + dump_register(GUSB2PHYACC(3)), + dump_register(GUSB2PHYACC(4)), + dump_register(GUSB2PHYACC(5)), + dump_register(GUSB2PHYACC(6)), + dump_register(GUSB2PHYACC(7)), + dump_register(GUSB2PHYACC(8)), + dump_register(GUSB2PHYACC(9)), + dump_register(GUSB2PHYACC(10)), + dump_register(GUSB2PHYACC(11)), + dump_register(GUSB2PHYACC(12)), + dump_register(GUSB2PHYACC(13)), + dump_register(GUSB2PHYACC(14)), + dump_register(GUSB2PHYACC(15)), + + dump_register(GUSB3PIPECTL(0)), + dump_register(GUSB3PIPECTL(1)), + dump_register(GUSB3PIPECTL(2)), + dump_register(GUSB3PIPECTL(3)), + dump_register(GUSB3PIPECTL(4)), + dump_register(GUSB3PIPECTL(5)), + dump_register(GUSB3PIPECTL(6)), + dump_register(GUSB3PIPECTL(7)), + dump_register(GUSB3PIPECTL(8)), + dump_register(GUSB3PIPECTL(9)), + dump_register(GUSB3PIPECTL(10)), + dump_register(GUSB3PIPECTL(11)), + dump_register(GUSB3PIPECTL(12)), + dump_register(GUSB3PIPECTL(13)), + dump_register(GUSB3PIPECTL(14)), + dump_register(GUSB3PIPECTL(15)), + + dump_register(GTXFIFOSIZ(0)), + dump_register(GTXFIFOSIZ(1)), + dump_register(GTXFIFOSIZ(2)), + dump_register(GTXFIFOSIZ(3)), + dump_register(GTXFIFOSIZ(4)), + dump_register(GTXFIFOSIZ(5)), + dump_register(GTXFIFOSIZ(6)), + dump_register(GTXFIFOSIZ(7)), + dump_register(GTXFIFOSIZ(8)), + dump_register(GTXFIFOSIZ(9)), + dump_register(GTXFIFOSIZ(10)), + dump_register(GTXFIFOSIZ(11)), + dump_register(GTXFIFOSIZ(12)), + dump_register(GTXFIFOSIZ(13)), + dump_register(GTXFIFOSIZ(14)), + dump_register(GTXFIFOSIZ(15)), + dump_register(GTXFIFOSIZ(16)), + dump_register(GTXFIFOSIZ(17)), + dump_register(GTXFIFOSIZ(18)), + dump_register(GTXFIFOSIZ(19)), + dump_register(GTXFIFOSIZ(20)), + dump_register(GTXFIFOSIZ(21)), + dump_register(GTXFIFOSIZ(22)), + dump_register(GTXFIFOSIZ(23)), + dump_register(GTXFIFOSIZ(24)), + dump_register(GTXFIFOSIZ(25)), + dump_register(GTXFIFOSIZ(26)), + dump_register(GTXFIFOSIZ(27)), + dump_register(GTXFIFOSIZ(28)), + dump_register(GTXFIFOSIZ(29)), + dump_register(GTXFIFOSIZ(30)), + dump_register(GTXFIFOSIZ(31)), + + dump_register(GRXFIFOSIZ(0)), + dump_register(GRXFIFOSIZ(1)), + dump_register(GRXFIFOSIZ(2)), + dump_register(GRXFIFOSIZ(3)), + dump_register(GRXFIFOSIZ(4)), + dump_register(GRXFIFOSIZ(5)), + dump_register(GRXFIFOSIZ(6)), + dump_register(GRXFIFOSIZ(7)), + dump_register(GRXFIFOSIZ(8)), + dump_register(GRXFIFOSIZ(9)), + dump_register(GRXFIFOSIZ(10)), + dump_register(GRXFIFOSIZ(11)), + dump_register(GRXFIFOSIZ(12)), + dump_register(GRXFIFOSIZ(13)), + dump_register(GRXFIFOSIZ(14)), + dump_register(GRXFIFOSIZ(15)), + dump_register(GRXFIFOSIZ(16)), + dump_register(GRXFIFOSIZ(17)), + dump_register(GRXFIFOSIZ(18)), + dump_register(GRXFIFOSIZ(19)), + dump_register(GRXFIFOSIZ(20)), + dump_register(GRXFIFOSIZ(21)), + dump_register(GRXFIFOSIZ(22)), + dump_register(GRXFIFOSIZ(23)), + dump_register(GRXFIFOSIZ(24)), + dump_register(GRXFIFOSIZ(25)), + dump_register(GRXFIFOSIZ(26)), + dump_register(GRXFIFOSIZ(27)), + dump_register(GRXFIFOSIZ(28)), + dump_register(GRXFIFOSIZ(29)), + dump_register(GRXFIFOSIZ(30)), + dump_register(GRXFIFOSIZ(31)), + + dump_register(GEVNTADRLO(0)), + dump_register(GEVNTADRHI(0)), + dump_register(GEVNTSIZ(0)), + dump_register(GEVNTCOUNT(0)), + + dump_register(GHWPARAMS8), + dump_register(DCFG), + dump_register(DCTL), + dump_register(DEVTEN), + dump_register(DSTS), + dump_register(DGCMDPAR), + dump_register(DGCMD), + dump_register(DALEPENA), + + dump_register(DEPCMDPAR2(0)), + dump_register(DEPCMDPAR2(1)), + dump_register(DEPCMDPAR2(2)), + dump_register(DEPCMDPAR2(3)), + dump_register(DEPCMDPAR2(4)), + dump_register(DEPCMDPAR2(5)), + dump_register(DEPCMDPAR2(6)), + dump_register(DEPCMDPAR2(7)), + dump_register(DEPCMDPAR2(8)), + dump_register(DEPCMDPAR2(9)), + dump_register(DEPCMDPAR2(10)), + dump_register(DEPCMDPAR2(11)), + dump_register(DEPCMDPAR2(12)), + dump_register(DEPCMDPAR2(13)), + dump_register(DEPCMDPAR2(14)), + dump_register(DEPCMDPAR2(15)), + dump_register(DEPCMDPAR2(16)), + dump_register(DEPCMDPAR2(17)), + dump_register(DEPCMDPAR2(18)), + dump_register(DEPCMDPAR2(19)), + dump_register(DEPCMDPAR2(20)), + dump_register(DEPCMDPAR2(21)), + dump_register(DEPCMDPAR2(22)), + dump_register(DEPCMDPAR2(23)), + dump_register(DEPCMDPAR2(24)), + dump_register(DEPCMDPAR2(25)), + dump_register(DEPCMDPAR2(26)), + dump_register(DEPCMDPAR2(27)), + dump_register(DEPCMDPAR2(28)), + dump_register(DEPCMDPAR2(29)), + dump_register(DEPCMDPAR2(30)), + dump_register(DEPCMDPAR2(31)), + + dump_register(DEPCMDPAR1(0)), + dump_register(DEPCMDPAR1(1)), + dump_register(DEPCMDPAR1(2)), + dump_register(DEPCMDPAR1(3)), + dump_register(DEPCMDPAR1(4)), + dump_register(DEPCMDPAR1(5)), + dump_register(DEPCMDPAR1(6)), + dump_register(DEPCMDPAR1(7)), + dump_register(DEPCMDPAR1(8)), + dump_register(DEPCMDPAR1(9)), + dump_register(DEPCMDPAR1(10)), + dump_register(DEPCMDPAR1(11)), + dump_register(DEPCMDPAR1(12)), + dump_register(DEPCMDPAR1(13)), + dump_register(DEPCMDPAR1(14)), + dump_register(DEPCMDPAR1(15)), + dump_register(DEPCMDPAR1(16)), + dump_register(DEPCMDPAR1(17)), + dump_register(DEPCMDPAR1(18)), + dump_register(DEPCMDPAR1(19)), + dump_register(DEPCMDPAR1(20)), + dump_register(DEPCMDPAR1(21)), + dump_register(DEPCMDPAR1(22)), + dump_register(DEPCMDPAR1(23)), + dump_register(DEPCMDPAR1(24)), + dump_register(DEPCMDPAR1(25)), + dump_register(DEPCMDPAR1(26)), + dump_register(DEPCMDPAR1(27)), + dump_register(DEPCMDPAR1(28)), + dump_register(DEPCMDPAR1(29)), + dump_register(DEPCMDPAR1(30)), + dump_register(DEPCMDPAR1(31)), + + dump_register(DEPCMDPAR0(0)), + dump_register(DEPCMDPAR0(1)), + dump_register(DEPCMDPAR0(2)), + dump_register(DEPCMDPAR0(3)), + dump_register(DEPCMDPAR0(4)), + dump_register(DEPCMDPAR0(5)), + dump_register(DEPCMDPAR0(6)), + dump_register(DEPCMDPAR0(7)), + dump_register(DEPCMDPAR0(8)), + dump_register(DEPCMDPAR0(9)), + dump_register(DEPCMDPAR0(10)), + dump_register(DEPCMDPAR0(11)), + dump_register(DEPCMDPAR0(12)), + dump_register(DEPCMDPAR0(13)), + dump_register(DEPCMDPAR0(14)), + dump_register(DEPCMDPAR0(15)), + dump_register(DEPCMDPAR0(16)), + dump_register(DEPCMDPAR0(17)), + dump_register(DEPCMDPAR0(18)), + dump_register(DEPCMDPAR0(19)), + dump_register(DEPCMDPAR0(20)), + dump_register(DEPCMDPAR0(21)), + dump_register(DEPCMDPAR0(22)), + dump_register(DEPCMDPAR0(23)), + dump_register(DEPCMDPAR0(24)), + dump_register(DEPCMDPAR0(25)), + dump_register(DEPCMDPAR0(26)), + dump_register(DEPCMDPAR0(27)), + dump_register(DEPCMDPAR0(28)), + dump_register(DEPCMDPAR0(29)), + dump_register(DEPCMDPAR0(30)), + dump_register(DEPCMDPAR0(31)), + + dump_register(DEPCMD(0)), + dump_register(DEPCMD(1)), + dump_register(DEPCMD(2)), + dump_register(DEPCMD(3)), + dump_register(DEPCMD(4)), + dump_register(DEPCMD(5)), + dump_register(DEPCMD(6)), + dump_register(DEPCMD(7)), + dump_register(DEPCMD(8)), + dump_register(DEPCMD(9)), + dump_register(DEPCMD(10)), + dump_register(DEPCMD(11)), + dump_register(DEPCMD(12)), + dump_register(DEPCMD(13)), + dump_register(DEPCMD(14)), + dump_register(DEPCMD(15)), + dump_register(DEPCMD(16)), + dump_register(DEPCMD(17)), + dump_register(DEPCMD(18)), + dump_register(DEPCMD(19)), + dump_register(DEPCMD(20)), + dump_register(DEPCMD(21)), + dump_register(DEPCMD(22)), + dump_register(DEPCMD(23)), + dump_register(DEPCMD(24)), + dump_register(DEPCMD(25)), + dump_register(DEPCMD(26)), + dump_register(DEPCMD(27)), + dump_register(DEPCMD(28)), + dump_register(DEPCMD(29)), + dump_register(DEPCMD(30)), + dump_register(DEPCMD(31)), + + dump_register(OCFG), + dump_register(OCTL), + dump_register(OEVTEN), + dump_register(OSTS), +}; + +static int dwc3_regdump_show(struct seq_file *s, void *unused) +{ + struct dwc3 *dwc = s->private; + int i; + + seq_printf(s, "DesignWare USB3 Core Register Dump\n"); + + for (i = 0; i < ARRAY_SIZE(dwc3_regs); i++) { + seq_printf(s, "%-20s : %08x\n", dwc3_regs[i].name, + dwc3_readl(dwc->regs, dwc3_regs[i].offset)); + } + + return 0; +} + +static int dwc3_regdump_open(struct inode *inode, struct file *file) +{ + return single_open(file, dwc3_regdump_show, inode->i_private); +} + +static const struct file_operations dwc3_regdump_fops = { + .open = dwc3_regdump_open, + .read = seq_read, + .release = single_release, +}; + +int __devinit dwc3_debugfs_init(struct dwc3 *dwc) +{ + struct dentry *root; + struct dentry *file; + int ret; + + root = debugfs_create_dir(dev_name(dwc->dev), NULL); + if (IS_ERR(root)){ + ret = PTR_ERR(root); + goto err0; + } + + dwc->root = root; + + file = debugfs_create_file("regdump", S_IRUGO, root, dwc, + &dwc3_regdump_fops); + if (IS_ERR(file)) { + ret = PTR_ERR(file); + goto err1; + } + return 0; + +err1: + debugfs_remove_recursive(root); + +err0: + return ret; +} + +void __devexit dwc3_debugfs_exit(struct dwc3 *dwc) +{ + debugfs_remove_recursive(dwc->root); + dwc->root = NULL; +} diff --git a/drivers/usb/dwc3/dwc3-omap.c b/drivers/usb/dwc3/dwc3-omap.c new file mode 100644 index 000000000000..062552b5fc8a --- /dev/null +++ b/drivers/usb/dwc3/dwc3-omap.c @@ -0,0 +1,401 @@ +/** + * dwc3-omap.c - OMAP Specific Glue layer + * + * Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com + * + * Authors: Felipe Balbi <balbi@ti.com>, + * Sebastian Andrzej Siewior <bigeasy@linutronix.de> + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. The names of the above-listed copyright holders may not be used + * to endorse or promote products derived from this software without + * specific prior written permission. + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2, as published by the Free + * Software Foundation. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS + * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, + * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR + * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR + * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, + * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, + * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR + * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/interrupt.h> +#include <linux/spinlock.h> +#include <linux/platform_device.h> +#include <linux/platform_data/dwc3-omap.h> +#include <linux/dma-mapping.h> +#include <linux/ioport.h> +#include <linux/io.h> +#include <linux/module.h> + +#include "io.h" + +/* + * All these registers belong to OMAP's Wrapper around the + * DesignWare USB3 Core. + */ + +#define USBOTGSS_REVISION 0x0000 +#define USBOTGSS_SYSCONFIG 0x0010 +#define USBOTGSS_IRQ_EOI 0x0020 +#define USBOTGSS_IRQSTATUS_RAW_0 0x0024 +#define USBOTGSS_IRQSTATUS_0 0x0028 +#define USBOTGSS_IRQENABLE_SET_0 0x002c +#define USBOTGSS_IRQENABLE_CLR_0 0x0030 +#define USBOTGSS_IRQSTATUS_RAW_1 0x0034 +#define USBOTGSS_IRQSTATUS_1 0x0038 +#define USBOTGSS_IRQENABLE_SET_1 0x003c +#define USBOTGSS_IRQENABLE_CLR_1 0x0040 +#define USBOTGSS_UTMI_OTG_CTRL 0x0080 +#define USBOTGSS_UTMI_OTG_STATUS 0x0084 +#define USBOTGSS_MMRAM_OFFSET 0x0100 +#define USBOTGSS_FLADJ 0x0104 +#define USBOTGSS_DEBUG_CFG 0x0108 +#define USBOTGSS_DEBUG_DATA 0x010c + +/* SYSCONFIG REGISTER */ +#define USBOTGSS_SYSCONFIG_DMADISABLE (1 << 16) +#define USBOTGSS_SYSCONFIG_STANDBYMODE(x) ((x) << 4) + +#define USBOTGSS_STANDBYMODE_FORCE_STANDBY 0 +#define USBOTGSS_STANDBYMODE_NO_STANDBY 1 +#define USBOTGSS_STANDBYMODE_SMART_STANDBY 2 +#define USBOTGSS_STANDBYMODE_SMART_WAKEUP 3 + +#define USBOTGSS_STANDBYMODE_MASK (0x03 << 4) + +#define USBOTGSS_SYSCONFIG_IDLEMODE(x) ((x) << 2) + +#define USBOTGSS_IDLEMODE_FORCE_IDLE 0 +#define USBOTGSS_IDLEMODE_NO_IDLE 1 +#define USBOTGSS_IDLEMODE_SMART_IDLE 2 +#define USBOTGSS_IDLEMODE_SMART_WAKEUP 3 + +#define USBOTGSS_IDLEMODE_MASK (0x03 << 2) + +/* IRQ_EOI REGISTER */ +#define USBOTGSS_IRQ_EOI_LINE_NUMBER (1 << 0) + +/* IRQS0 BITS */ +#define USBOTGSS_IRQO_COREIRQ_ST (1 << 0) + +/* IRQ1 BITS */ +#define USBOTGSS_IRQ1_DMADISABLECLR (1 << 17) +#define USBOTGSS_IRQ1_OEVT (1 << 16) +#define USBOTGSS_IRQ1_DRVVBUS_RISE (1 << 13) +#define USBOTGSS_IRQ1_CHRGVBUS_RISE (1 << 12) +#define USBOTGSS_IRQ1_DISCHRGVBUS_RISE (1 << 11) +#define USBOTGSS_IRQ1_IDPULLUP_RISE (1 << 8) +#define USBOTGSS_IRQ1_DRVVBUS_FALL (1 << 5) +#define USBOTGSS_IRQ1_CHRGVBUS_FALL (1 << 4) +#define USBOTGSS_IRQ1_DISCHRGVBUS_FALL (1 << 3) +#define USBOTGSS_IRQ1_IDPULLUP_FALL (1 << 0) + +/* UTMI_OTG_CTRL REGISTER */ +#define USBOTGSS_UTMI_OTG_CTRL_DRVVBUS (1 << 5) +#define USBOTGSS_UTMI_OTG_CTRL_CHRGVBUS (1 << 4) +#define USBOTGSS_UTMI_OTG_CTRL_DISCHRGVBUS (1 << 3) +#define USBOTGSS_UTMI_OTG_CTRL_IDPULLUP (1 << 0) + +/* UTMI_OTG_STATUS REGISTER */ +#define USBOTGSS_UTMI_OTG_STATUS_SW_MODE (1 << 31) +#define USBOTGSS_UTMI_OTG_STATUS_POWERPRESENT (1 << 9) +#define USBOTGSS_UTMI_OTG_STATUS_TXBITSTUFFENABLE (1 << 8) +#define USBOTGSS_UTMI_OTG_STATUS_IDDIG (1 << 4) +#define USBOTGSS_UTMI_OTG_STATUS_SESSEND (1 << 3) +#define USBOTGSS_UTMI_OTG_STATUS_SESSVALID (1 << 2) +#define USBOTGSS_UTMI_OTG_STATUS_VBUSVALID (1 << 1) + +struct dwc3_omap { + /* device lock */ + spinlock_t lock; + + struct platform_device *dwc3; + struct device *dev; + + int irq; + void __iomem *base; + + void *context; + u32 resource_size; + + u32 dma_status:1; +}; + +static irqreturn_t dwc3_omap_interrupt(int irq, void *_omap) +{ + struct dwc3_omap *omap = _omap; + u32 reg; + + spin_lock(&omap->lock); + + reg = dwc3_readl(omap->base, USBOTGSS_IRQSTATUS_1); + + if (reg & USBOTGSS_IRQ1_DMADISABLECLR) { + dev_dbg(omap->dev, "DMA Disable was Cleared\n"); + omap->dma_status = false; + } + + if (reg & USBOTGSS_IRQ1_OEVT) + dev_dbg(omap->dev, "OTG Event\n"); + + if (reg & USBOTGSS_IRQ1_DRVVBUS_RISE) + dev_dbg(omap->dev, "DRVVBUS Rise\n"); + + if (reg & USBOTGSS_IRQ1_CHRGVBUS_RISE) + dev_dbg(omap->dev, "CHRGVBUS Rise\n"); + + if (reg & USBOTGSS_IRQ1_DISCHRGVBUS_RISE) + dev_dbg(omap->dev, "DISCHRGVBUS Rise\n"); + + if (reg & USBOTGSS_IRQ1_IDPULLUP_RISE) + dev_dbg(omap->dev, "IDPULLUP Rise\n"); + + if (reg & USBOTGSS_IRQ1_DRVVBUS_FALL) + dev_dbg(omap->dev, "DRVVBUS Fall\n"); + + if (reg & USBOTGSS_IRQ1_CHRGVBUS_FALL) + dev_dbg(omap->dev, "CHRGVBUS Fall\n"); + + if (reg & USBOTGSS_IRQ1_DISCHRGVBUS_FALL) + dev_dbg(omap->dev, "DISCHRGVBUS Fall\n"); + + if (reg & USBOTGSS_IRQ1_IDPULLUP_FALL) + dev_dbg(omap->dev, "IDPULLUP Fall\n"); + + dwc3_writel(omap->base, USBOTGSS_IRQSTATUS_1, reg); + + reg = dwc3_readl(omap->base, USBOTGSS_IRQSTATUS_0); + dwc3_writel(omap->base, USBOTGSS_IRQSTATUS_0, reg); + + spin_unlock(&omap->lock); + + return IRQ_HANDLED; +} + +static int __devinit dwc3_omap_probe(struct platform_device *pdev) +{ + struct dwc3_omap_data *pdata = pdev->dev.platform_data; + struct platform_device *dwc3; + struct dwc3_omap *omap; + struct resource *res; + + int ret = -ENOMEM; + int irq; + + u32 reg; + + void __iomem *base; + void *context; + + omap = kzalloc(sizeof(*omap), GFP_KERNEL); + if (!omap) { + dev_err(&pdev->dev, "not enough memory\n"); + goto err0; + } + + platform_set_drvdata(pdev, omap); + + irq = platform_get_irq(pdev, 1); + if (irq < 0) { + dev_err(&pdev->dev, "missing IRQ resource\n"); + ret = -EINVAL; + goto err1; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 1); + if (!res) { + dev_err(&pdev->dev, "missing memory base resource\n"); + ret = -EINVAL; + goto err1; + } + + base = ioremap_nocache(res->start, resource_size(res)); + if (!base) { + dev_err(&pdev->dev, "ioremap failed\n"); + goto err1; + } + + dwc3 = platform_device_alloc("dwc3-omap", -1); + if (!dwc3) { + dev_err(&pdev->dev, "couldn't allocate dwc3 device\n"); + goto err2; + } + + context = kzalloc(resource_size(res), GFP_KERNEL); + if (!context) { + dev_err(&pdev->dev, "couldn't allocate dwc3 context memory\n"); + goto err3; + } + + spin_lock_init(&omap->lock); + dma_set_coherent_mask(&dwc3->dev, pdev->dev.coherent_dma_mask); + + dwc3->dev.parent = &pdev->dev; + dwc3->dev.dma_mask = pdev->dev.dma_mask; + dwc3->dev.dma_parms = pdev->dev.dma_parms; + omap->resource_size = resource_size(res); + omap->context = context; + omap->dev = &pdev->dev; + omap->irq = irq; + omap->base = base; + omap->dwc3 = dwc3; + + reg = dwc3_readl(omap->base, USBOTGSS_UTMI_OTG_STATUS); + + if (!pdata) { + dev_dbg(&pdev->dev, "missing platform data\n"); + } else { + switch (pdata->utmi_mode) { + case DWC3_OMAP_UTMI_MODE_SW: + reg |= USBOTGSS_UTMI_OTG_STATUS_SW_MODE; + break; + case DWC3_OMAP_UTMI_MODE_HW: + reg &= ~USBOTGSS_UTMI_OTG_STATUS_SW_MODE; + break; + default: + dev_dbg(&pdev->dev, "UNKNOWN utmi mode %d\n", + pdata->utmi_mode); + } + } + + dwc3_writel(omap->base, USBOTGSS_UTMI_OTG_STATUS, reg); + + /* check the DMA Status */ + reg = dwc3_readl(omap->base, USBOTGSS_SYSCONFIG); + omap->dma_status = !!(reg & USBOTGSS_SYSCONFIG_DMADISABLE); + + /* Set No-Idle and No-Standby */ + reg &= ~(USBOTGSS_STANDBYMODE_MASK + | USBOTGSS_IDLEMODE_MASK); + + reg |= (USBOTGSS_SYSCONFIG_STANDBYMODE(USBOTGSS_STANDBYMODE_NO_STANDBY) + | USBOTGSS_SYSCONFIG_IDLEMODE(USBOTGSS_IDLEMODE_NO_IDLE)); + + dwc3_writel(omap->base, USBOTGSS_SYSCONFIG, reg); + + ret = request_irq(omap->irq, dwc3_omap_interrupt, 0, + "dwc3-omap", omap); + if (ret) { + dev_err(&pdev->dev, "failed to request IRQ #%d --> %d\n", + omap->irq, ret); + goto err4; + } + + /* enable all IRQs */ + reg = USBOTGSS_IRQO_COREIRQ_ST; + dwc3_writel(omap->base, USBOTGSS_IRQENABLE_SET_0, reg); + + reg = (USBOTGSS_IRQ1_OEVT | + USBOTGSS_IRQ1_DRVVBUS_RISE | + USBOTGSS_IRQ1_CHRGVBUS_RISE | + USBOTGSS_IRQ1_DISCHRGVBUS_RISE | + USBOTGSS_IRQ1_IDPULLUP_RISE | + USBOTGSS_IRQ1_DRVVBUS_FALL | + USBOTGSS_IRQ1_CHRGVBUS_FALL | + USBOTGSS_IRQ1_DISCHRGVBUS_FALL | + USBOTGSS_IRQ1_IDPULLUP_FALL); + + dwc3_writel(omap->base, USBOTGSS_IRQENABLE_SET_1, reg); + + ret = platform_device_add_resources(dwc3, pdev->resource, + pdev->num_resources); + if (ret) { + dev_err(&pdev->dev, "couldn't add resources to dwc3 device\n"); + goto err5; + } + + ret = platform_device_add(dwc3); + if (ret) { + dev_err(&pdev->dev, "failed to register dwc3 device\n"); + goto err5; + } + + return 0; + +err5: + free_irq(omap->irq, omap); + +err4: + kfree(omap->context); + +err3: + platform_device_put(dwc3); + +err2: + iounmap(base); + +err1: + kfree(omap); + +err0: + return ret; +} + +static int __devexit dwc3_omap_remove(struct platform_device *pdev) +{ + struct dwc3_omap *omap = platform_get_drvdata(pdev); + + platform_device_unregister(omap->dwc3); + + free_irq(omap->irq, omap); + iounmap(omap->base); + + kfree(omap->context); + kfree(omap); + + return 0; +} + +static const struct of_device_id of_dwc3_matach[] = { + { + "ti,dwc3", + }, + { }, +}; +MODULE_DEVICE_TABLE(of, of_dwc3_matach); + +static struct platform_driver dwc3_omap_driver = { + .probe = dwc3_omap_probe, + .remove = __devexit_p(dwc3_omap_remove), + .driver = { + .name = "omap-dwc3", + .of_match_table = of_dwc3_matach, + }, +}; + +MODULE_AUTHOR("Felipe Balbi <balbi@ti.com>"); +MODULE_LICENSE("Dual BSD/GPL"); +MODULE_DESCRIPTION("DesignWare USB3 OMAP Glue Layer"); + +static int __devinit dwc3_omap_init(void) +{ + return platform_driver_register(&dwc3_omap_driver); +} +module_init(dwc3_omap_init); + +static void __exit dwc3_omap_exit(void) +{ + platform_driver_unregister(&dwc3_omap_driver); +} +module_exit(dwc3_omap_exit); diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c new file mode 100644 index 000000000000..f77c00042685 --- /dev/null +++ b/drivers/usb/dwc3/dwc3-pci.c @@ -0,0 +1,219 @@ +/** + * dwc3-pci.c - PCI Specific glue layer + * + * Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com + * + * Authors: Felipe Balbi <balbi@ti.com>, + * Sebastian Andrzej Siewior <bigeasy@linutronix.de> + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. The names of the above-listed copyright holders may not be used + * to endorse or promote products derived from this software without + * specific prior written permission. + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2, as published by the Free + * Software Foundation. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS + * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, + * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR + * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR + * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, + * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, + * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR + * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/pci.h> +#include <linux/platform_device.h> + +/* FIXME define these in <linux/pci_ids.h> */ +#define PCI_VENDOR_ID_SYNOPSYS 0x16c3 +#define PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3 0xabcd + +#define DWC3_PCI_DEVS_POSSIBLE 32 + +struct dwc3_pci { + struct device *dev; + struct platform_device *dwc3; +}; + +static DECLARE_BITMAP(dwc3_pci_devs, DWC3_PCI_DEVS_POSSIBLE); + +static int dwc3_pci_get_device_id(struct dwc3_pci *glue) +{ + int id; + +again: + id = find_first_zero_bit(dwc3_pci_devs, DWC3_PCI_DEVS_POSSIBLE); + if (id < DWC3_PCI_DEVS_POSSIBLE) { + int old; + + old = test_and_set_bit(id, dwc3_pci_devs); + if (old) + goto again; + } else { + dev_err(glue->dev, "no space for new device\n"); + id = -ENOMEM; + } + + return 0; +} + +static void dwc3_pci_put_device_id(struct dwc3_pci *glue, int id) +{ + int ret; + + if (id < 0) + return; + + ret = test_bit(id, dwc3_pci_devs); + WARN(!ret, "Device: %s\nID %d not in use\n", + dev_driver_string(glue->dev), id); + clear_bit(id, dwc3_pci_devs); +} + +static int __devinit dwc3_pci_probe(struct pci_dev *pci, + const struct pci_device_id *id) +{ + struct resource res[2]; + struct platform_device *dwc3; + struct dwc3_pci *glue; + int ret = -ENOMEM; + int devid; + + glue = kzalloc(sizeof(*glue), GFP_KERNEL); + if (!glue) { + dev_err(&pci->dev, "not enough memory\n"); + goto err0; + } + + glue->dev = &pci->dev; + + ret = pci_enable_device(pci); + if (ret) { + dev_err(&pci->dev, "failed to enable pci device\n"); + goto err1; + } + + pci_set_power_state(pci, PCI_D0); + pci_set_master(pci); + + devid = dwc3_pci_get_device_id(glue); + if (devid < 0) + goto err2; + + dwc3 = platform_device_alloc("dwc3-pci", devid); + if (!dwc3) { + dev_err(&pci->dev, "couldn't allocate dwc3 device\n"); + goto err3; + } + + memset(res, 0x00, sizeof(struct resource) * ARRAY_SIZE(res)); + + res[0].start = pci_resource_start(pci, 0); + res[0].end = pci_resource_end(pci, 0); + res[0].name = "dwc_usb3"; + res[0].flags = IORESOURCE_MEM; + + res[1].start = pci->irq; + res[1].name = "dwc_usb3"; + res[1].flags = IORESOURCE_IRQ; + + ret = platform_device_add_resources(dwc3, res, ARRAY_SIZE(res)); + if (ret) { + dev_err(&pci->dev, "couldn't add resources to dwc3 device\n"); + goto err4; + } + + pci_set_drvdata(pci, glue); + + dma_set_coherent_mask(&dwc3->dev, pci->dev.coherent_dma_mask); + + dwc3->dev.dma_mask = pci->dev.dma_mask; + dwc3->dev.dma_parms = pci->dev.dma_parms; + dwc3->dev.parent = &pci->dev; + glue->dwc3 = dwc3; + + ret = platform_device_add(dwc3); + if (ret) { + dev_err(&pci->dev, "failed to register dwc3 device\n"); + goto err4; + } + + return 0; + +err4: + pci_set_drvdata(pci, NULL); + platform_device_put(dwc3); + +err3: + dwc3_pci_put_device_id(glue, devid); + +err2: + pci_disable_device(pci); + +err1: + kfree(pci); + +err0: + return ret; +} + +static void __devexit dwc3_pci_remove(struct pci_dev *pci) +{ + struct dwc3_pci *glue = pci_get_drvdata(pci); + + dwc3_pci_put_device_id(glue, glue->dwc3->id); + platform_device_unregister(glue->dwc3); + pci_set_drvdata(pci, NULL); + pci_disable_device(pci); + kfree(glue); +} + +static DEFINE_PCI_DEVICE_TABLE(dwc3_pci_id_table) = { + { + PCI_DEVICE(PCI_VENDOR_ID_SYNOPSYS, + PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3), + }, + { } /* Terminating Entry */ +}; +MODULE_DEVICE_TABLE(pci, dwc3_pci_id_table); + +static struct pci_driver dwc3_pci_driver = { + .name = "pci-dwc3", + .id_table = dwc3_pci_id_table, + .probe = dwc3_pci_probe, + .remove = __devexit_p(dwc3_pci_remove), +}; + +MODULE_AUTHOR("Felipe Balbi <balbi@ti.com>"); +MODULE_LICENSE("Dual BSD/GPL"); +MODULE_DESCRIPTION("DesignWare USB3 PCI Glue Layer"); + +static int __devinit dwc3_pci_init(void) +{ + return pci_register_driver(&dwc3_pci_driver); +} +module_init(dwc3_pci_init); + +static void __exit dwc3_pci_exit(void) +{ + pci_unregister_driver(&dwc3_pci_driver); +} +module_exit(dwc3_pci_exit); diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c new file mode 100644 index 000000000000..69a4e43ddf59 --- /dev/null +++ b/drivers/usb/dwc3/ep0.c @@ -0,0 +1,804 @@ +/** + * ep0.c - DesignWare USB3 DRD Controller Endpoint 0 Handling + * + * Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com + * + * Authors: Felipe Balbi <balbi@ti.com>, + * Sebastian Andrzej Siewior <bigeasy@linutronix.de> + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. The names of the above-listed copyright holders may not be used + * to endorse or promote products derived from this software without + * specific prior written permission. + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2, as published by the Free + * Software Foundation. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS + * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, + * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR + * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR + * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, + * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, + * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR + * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/spinlock.h> +#include <linux/platform_device.h> +#include <linux/pm_runtime.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/list.h> +#include <linux/dma-mapping.h> + +#include <linux/usb/ch9.h> +#include <linux/usb/gadget.h> + +#include "core.h" +#include "gadget.h" +#include "io.h" + +static void dwc3_ep0_inspect_setup(struct dwc3 *dwc, + const struct dwc3_event_depevt *event); + +static const char *dwc3_ep0_state_string(enum dwc3_ep0_state state) +{ + switch (state) { + case EP0_UNCONNECTED: + return "Unconnected"; + case EP0_SETUP_PHASE: + return "Setup Phase"; + case EP0_DATA_PHASE: + return "Data Phase"; + case EP0_STATUS_PHASE: + return "Status Phase"; + default: + return "UNKNOWN"; + } +} + +static int dwc3_ep0_start_trans(struct dwc3 *dwc, u8 epnum, dma_addr_t buf_dma, + u32 len, u32 type) +{ + struct dwc3_gadget_ep_cmd_params params; + struct dwc3_trb_hw *trb_hw; + struct dwc3_trb trb; + struct dwc3_ep *dep; + + int ret; + + dep = dwc->eps[epnum]; + if (dep->flags & DWC3_EP_BUSY) { + dev_vdbg(dwc->dev, "%s: still busy\n", dep->name); + return 0; + } + + trb_hw = dwc->ep0_trb; + memset(&trb, 0, sizeof(trb)); + + trb.trbctl = type; + trb.bplh = buf_dma; + trb.length = len; + + trb.hwo = 1; + trb.lst = 1; + trb.ioc = 1; + trb.isp_imi = 1; + + dwc3_trb_to_hw(&trb, trb_hw); + + memset(¶ms, 0, sizeof(params)); + params.param0 = upper_32_bits(dwc->ep0_trb_addr); + params.param1 = lower_32_bits(dwc->ep0_trb_addr); + + ret = dwc3_send_gadget_ep_cmd(dwc, dep->number, + DWC3_DEPCMD_STARTTRANSFER, ¶ms); + if (ret < 0) { + dev_dbg(dwc->dev, "failed to send STARTTRANSFER command\n"); + return ret; + } + + dep->flags |= DWC3_EP_BUSY; + dep->res_trans_idx = dwc3_gadget_ep_get_transfer_index(dwc, + dep->number); + + dwc->ep0_next_event = DWC3_EP0_COMPLETE; + + return 0; +} + +static int __dwc3_gadget_ep0_queue(struct dwc3_ep *dep, + struct dwc3_request *req) +{ + int ret = 0; + + req->request.actual = 0; + req->request.status = -EINPROGRESS; + req->epnum = dep->number; + + list_add_tail(&req->list, &dep->request_list); + + /* + * Gadget driver might not be quick enough to queue a request + * before we get a Transfer Not Ready event on this endpoint. + * + * In that case, we will set DWC3_EP_PENDING_REQUEST. When that + * flag is set, it's telling us that as soon as Gadget queues the + * required request, we should kick the transfer here because the + * IRQ we were waiting for is long gone. + */ + if (dep->flags & DWC3_EP_PENDING_REQUEST) { + struct dwc3 *dwc = dep->dwc; + unsigned direction; + u32 type; + + direction = !!(dep->flags & DWC3_EP0_DIR_IN); + + if (dwc->ep0state == EP0_STATUS_PHASE) { + type = dwc->three_stage_setup + ? DWC3_TRBCTL_CONTROL_STATUS3 + : DWC3_TRBCTL_CONTROL_STATUS2; + } else if (dwc->ep0state == EP0_DATA_PHASE) { + type = DWC3_TRBCTL_CONTROL_DATA; + } else { + /* should never happen */ + WARN_ON(1); + return 0; + } + + ret = dwc3_ep0_start_trans(dwc, direction, + req->request.dma, req->request.length, type); + dep->flags &= ~(DWC3_EP_PENDING_REQUEST | + DWC3_EP0_DIR_IN); + } + + return ret; +} + +int dwc3_gadget_ep0_queue(struct usb_ep *ep, struct usb_request *request, + gfp_t gfp_flags) +{ + struct dwc3_request *req = to_dwc3_request(request); + struct dwc3_ep *dep = to_dwc3_ep(ep); + struct dwc3 *dwc = dep->dwc; + + unsigned long flags; + + int ret; + + spin_lock_irqsave(&dwc->lock, flags); + if (!dep->desc) { + dev_dbg(dwc->dev, "trying to queue request %p to disabled %s\n", + request, dep->name); + ret = -ESHUTDOWN; + goto out; + } + + /* we share one TRB for ep0/1 */ + if (!list_empty(&dwc->eps[0]->request_list) || + !list_empty(&dwc->eps[1]->request_list) || + dwc->ep0_status_pending) { + ret = -EBUSY; + goto out; + } + + dev_vdbg(dwc->dev, "queueing request %p to %s length %d, state '%s'\n", + request, dep->name, request->length, + dwc3_ep0_state_string(dwc->ep0state)); + + ret = __dwc3_gadget_ep0_queue(dep, req); + +out: + spin_unlock_irqrestore(&dwc->lock, flags); + + return ret; +} + +static void dwc3_ep0_stall_and_restart(struct dwc3 *dwc) +{ + struct dwc3_ep *dep = dwc->eps[0]; + + /* stall is always issued on EP0 */ + __dwc3_gadget_ep_set_halt(dwc->eps[0], 1); + dwc->eps[0]->flags = DWC3_EP_ENABLED; + + if (!list_empty(&dep->request_list)) { + struct dwc3_request *req; + + req = next_request(&dep->request_list); + dwc3_gadget_giveback(dep, req, -ECONNRESET); + } + + dwc->ep0state = EP0_SETUP_PHASE; + dwc3_ep0_out_start(dwc); +} + +void dwc3_ep0_out_start(struct dwc3 *dwc) +{ + int ret; + + ret = dwc3_ep0_start_trans(dwc, 0, dwc->ctrl_req_addr, 8, + DWC3_TRBCTL_CONTROL_SETUP); + WARN_ON(ret < 0); +} + +static struct dwc3_ep *dwc3_wIndex_to_dep(struct dwc3 *dwc, __le16 wIndex_le) +{ + struct dwc3_ep *dep; + u32 windex = le16_to_cpu(wIndex_le); + u32 epnum; + + epnum = (windex & USB_ENDPOINT_NUMBER_MASK) << 1; + if ((windex & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN) + epnum |= 1; + + dep = dwc->eps[epnum]; + if (dep->flags & DWC3_EP_ENABLED) + return dep; + + return NULL; +} + +static void dwc3_ep0_send_status_response(struct dwc3 *dwc) +{ + dwc3_ep0_start_trans(dwc, 1, dwc->setup_buf_addr, + dwc->ep0_usb_req.length, + DWC3_TRBCTL_CONTROL_DATA); +} + +/* + * ch 9.4.5 + */ +static int dwc3_ep0_handle_status(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl) +{ + struct dwc3_ep *dep; + u32 recip; + u16 usb_status = 0; + __le16 *response_pkt; + + recip = ctrl->bRequestType & USB_RECIP_MASK; + switch (recip) { + case USB_RECIP_DEVICE: + /* + * We are self-powered. U1/U2/LTM will be set later + * once we handle this states. RemoteWakeup is 0 on SS + */ + usb_status |= dwc->is_selfpowered << USB_DEVICE_SELF_POWERED; + break; + + case USB_RECIP_INTERFACE: + /* + * Function Remote Wake Capable D0 + * Function Remote Wakeup D1 + */ + break; + + case USB_RECIP_ENDPOINT: + dep = dwc3_wIndex_to_dep(dwc, ctrl->wIndex); + if (!dep) + return -EINVAL; + + if (dep->flags & DWC3_EP_STALL) + usb_status = 1 << USB_ENDPOINT_HALT; + break; + default: + return -EINVAL; + }; + + response_pkt = (__le16 *) dwc->setup_buf; + *response_pkt = cpu_to_le16(usb_status); + dwc->ep0_usb_req.length = sizeof(*response_pkt); + dwc->ep0_status_pending = 1; + + return 0; +} + +static int dwc3_ep0_handle_feature(struct dwc3 *dwc, + struct usb_ctrlrequest *ctrl, int set) +{ + struct dwc3_ep *dep; + u32 recip; + u32 wValue; + u32 wIndex; + u32 reg; + int ret; + u32 mode; + + wValue = le16_to_cpu(ctrl->wValue); + wIndex = le16_to_cpu(ctrl->wIndex); + recip = ctrl->bRequestType & USB_RECIP_MASK; + switch (recip) { + case USB_RECIP_DEVICE: + + /* + * 9.4.1 says only only for SS, in AddressState only for + * default control pipe + */ + switch (wValue) { + case USB_DEVICE_U1_ENABLE: + case USB_DEVICE_U2_ENABLE: + case USB_DEVICE_LTM_ENABLE: + if (dwc->dev_state != DWC3_CONFIGURED_STATE) + return -EINVAL; + if (dwc->speed != DWC3_DSTS_SUPERSPEED) + return -EINVAL; + } + + /* XXX add U[12] & LTM */ + switch (wValue) { + case USB_DEVICE_REMOTE_WAKEUP: + break; + case USB_DEVICE_U1_ENABLE: + break; + case USB_DEVICE_U2_ENABLE: + break; + case USB_DEVICE_LTM_ENABLE: + break; + + case USB_DEVICE_TEST_MODE: + if ((wIndex & 0xff) != 0) + return -EINVAL; + if (!set) + return -EINVAL; + + mode = wIndex >> 8; + reg = dwc3_readl(dwc->regs, DWC3_DCTL); + reg &= ~DWC3_DCTL_TSTCTRL_MASK; + + switch (mode) { + case TEST_J: + case TEST_K: + case TEST_SE0_NAK: + case TEST_PACKET: + case TEST_FORCE_EN: + reg |= mode << 1; + break; + default: + return -EINVAL; + } + dwc3_writel(dwc->regs, DWC3_DCTL, reg); + break; + default: + return -EINVAL; + } + break; + + case USB_RECIP_INTERFACE: + switch (wValue) { + case USB_INTRF_FUNC_SUSPEND: + if (wIndex & USB_INTRF_FUNC_SUSPEND_LP) + /* XXX enable Low power suspend */ + ; + if (wIndex & USB_INTRF_FUNC_SUSPEND_RW) + /* XXX enable remote wakeup */ + ; + break; + default: + return -EINVAL; + } + break; + + case USB_RECIP_ENDPOINT: + switch (wValue) { + case USB_ENDPOINT_HALT: + + dep = dwc3_wIndex_to_dep(dwc, ctrl->wIndex); + if (!dep) + return -EINVAL; + ret = __dwc3_gadget_ep_set_halt(dep, set); + if (ret) + return -EINVAL; + break; + default: + return -EINVAL; + } + break; + + default: + return -EINVAL; + }; + + return 0; +} + +static int dwc3_ep0_set_address(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl) +{ + u32 addr; + u32 reg; + + addr = le16_to_cpu(ctrl->wValue); + if (addr > 127) + return -EINVAL; + + reg = dwc3_readl(dwc->regs, DWC3_DCFG); + reg &= ~(DWC3_DCFG_DEVADDR_MASK); + reg |= DWC3_DCFG_DEVADDR(addr); + dwc3_writel(dwc->regs, DWC3_DCFG, reg); + + if (addr) + dwc->dev_state = DWC3_ADDRESS_STATE; + else + dwc->dev_state = DWC3_DEFAULT_STATE; + + return 0; +} + +static int dwc3_ep0_delegate_req(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl) +{ + int ret; + + spin_unlock(&dwc->lock); + ret = dwc->gadget_driver->setup(&dwc->gadget, ctrl); + spin_lock(&dwc->lock); + return ret; +} + +static int dwc3_ep0_set_config(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl) +{ + u32 cfg; + int ret; + + dwc->start_config_issued = false; + cfg = le16_to_cpu(ctrl->wValue); + + switch (dwc->dev_state) { + case DWC3_DEFAULT_STATE: + return -EINVAL; + break; + + case DWC3_ADDRESS_STATE: + ret = dwc3_ep0_delegate_req(dwc, ctrl); + /* if the cfg matches and the cfg is non zero */ + if (!ret && cfg) + dwc->dev_state = DWC3_CONFIGURED_STATE; + break; + + case DWC3_CONFIGURED_STATE: + ret = dwc3_ep0_delegate_req(dwc, ctrl); + if (!cfg) + dwc->dev_state = DWC3_ADDRESS_STATE; + break; + } + return 0; +} + +static int dwc3_ep0_std_request(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl) +{ + int ret; + + switch (ctrl->bRequest) { + case USB_REQ_GET_STATUS: + dev_vdbg(dwc->dev, "USB_REQ_GET_STATUS\n"); + ret = dwc3_ep0_handle_status(dwc, ctrl); + break; + case USB_REQ_CLEAR_FEATURE: + dev_vdbg(dwc->dev, "USB_REQ_CLEAR_FEATURE\n"); + ret = dwc3_ep0_handle_feature(dwc, ctrl, 0); + break; + case USB_REQ_SET_FEATURE: + dev_vdbg(dwc->dev, "USB_REQ_SET_FEATURE\n"); + ret = dwc3_ep0_handle_feature(dwc, ctrl, 1); + break; + case USB_REQ_SET_ADDRESS: + dev_vdbg(dwc->dev, "USB_REQ_SET_ADDRESS\n"); + ret = dwc3_ep0_set_address(dwc, ctrl); + break; + case USB_REQ_SET_CONFIGURATION: + dev_vdbg(dwc->dev, "USB_REQ_SET_CONFIGURATION\n"); + ret = dwc3_ep0_set_config(dwc, ctrl); + break; + default: + dev_vdbg(dwc->dev, "Forwarding to gadget driver\n"); + ret = dwc3_ep0_delegate_req(dwc, ctrl); + break; + }; + + return ret; +} + +static void dwc3_ep0_inspect_setup(struct dwc3 *dwc, + const struct dwc3_event_depevt *event) +{ + struct usb_ctrlrequest *ctrl = dwc->ctrl_req; + int ret; + u32 len; + + if (!dwc->gadget_driver) + goto err; + + len = le16_to_cpu(ctrl->wLength); + if (!len) { + dwc->three_stage_setup = false; + dwc->ep0_expect_in = false; + dwc->ep0_next_event = DWC3_EP0_NRDY_STATUS; + } else { + dwc->three_stage_setup = true; + dwc->ep0_expect_in = !!(ctrl->bRequestType & USB_DIR_IN); + dwc->ep0_next_event = DWC3_EP0_NRDY_DATA; + } + + if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) + ret = dwc3_ep0_std_request(dwc, ctrl); + else + ret = dwc3_ep0_delegate_req(dwc, ctrl); + + if (ret >= 0) + return; + +err: + dwc3_ep0_stall_and_restart(dwc); +} + +static void dwc3_ep0_complete_data(struct dwc3 *dwc, + const struct dwc3_event_depevt *event) +{ + struct dwc3_request *r = NULL; + struct usb_request *ur; + struct dwc3_trb trb; + struct dwc3_ep *dep; + u32 transferred; + u8 epnum; + + epnum = event->endpoint_number; + dep = dwc->eps[epnum]; + + dwc->ep0_next_event = DWC3_EP0_NRDY_STATUS; + + if (!dwc->ep0_status_pending) { + r = next_request(&dwc->eps[0]->request_list); + ur = &r->request; + } else { + ur = &dwc->ep0_usb_req; + dwc->ep0_status_pending = 0; + } + + dwc3_trb_to_nat(dwc->ep0_trb, &trb); + + if (dwc->ep0_bounced) { + struct dwc3_ep *ep0 = dwc->eps[0]; + + transferred = min_t(u32, ur->length, + ep0->endpoint.maxpacket - trb.length); + memcpy(ur->buf, dwc->ep0_bounce, transferred); + dwc->ep0_bounced = false; + } else { + transferred = ur->length - trb.length; + ur->actual += transferred; + } + + if ((epnum & 1) && ur->actual < ur->length) { + /* for some reason we did not get everything out */ + + dwc3_ep0_stall_and_restart(dwc); + } else { + /* + * handle the case where we have to send a zero packet. This + * seems to be case when req.length > maxpacket. Could it be? + */ + if (r) + dwc3_gadget_giveback(dep, r, 0); + } +} + +static void dwc3_ep0_complete_req(struct dwc3 *dwc, + const struct dwc3_event_depevt *event) +{ + struct dwc3_request *r; + struct dwc3_ep *dep; + + dep = dwc->eps[0]; + + if (!list_empty(&dep->request_list)) { + r = next_request(&dep->request_list); + + dwc3_gadget_giveback(dep, r, 0); + } + + dwc->ep0state = EP0_SETUP_PHASE; + dwc3_ep0_out_start(dwc); +} + +static void dwc3_ep0_xfer_complete(struct dwc3 *dwc, + const struct dwc3_event_depevt *event) +{ + struct dwc3_ep *dep = dwc->eps[event->endpoint_number]; + + dep->flags &= ~DWC3_EP_BUSY; + + switch (dwc->ep0state) { + case EP0_SETUP_PHASE: + dev_vdbg(dwc->dev, "Inspecting Setup Bytes\n"); + dwc3_ep0_inspect_setup(dwc, event); + break; + + case EP0_DATA_PHASE: + dev_vdbg(dwc->dev, "Data Phase\n"); + dwc3_ep0_complete_data(dwc, event); + break; + + case EP0_STATUS_PHASE: + dev_vdbg(dwc->dev, "Status Phase\n"); + dwc3_ep0_complete_req(dwc, event); + break; + default: + WARN(true, "UNKNOWN ep0state %d\n", dwc->ep0state); + } +} + +static void dwc3_ep0_do_control_setup(struct dwc3 *dwc, + const struct dwc3_event_depevt *event) +{ + dwc->ep0state = EP0_SETUP_PHASE; + dwc3_ep0_out_start(dwc); +} + +static void dwc3_ep0_do_control_data(struct dwc3 *dwc, + const struct dwc3_event_depevt *event) +{ + struct dwc3_ep *dep; + struct dwc3_request *req; + int ret; + + dep = dwc->eps[0]; + dwc->ep0state = EP0_DATA_PHASE; + + if (dwc->ep0_status_pending) { + dwc3_ep0_send_status_response(dwc); + return; + } + + if (list_empty(&dep->request_list)) { + dev_vdbg(dwc->dev, "pending request for EP0 Data phase\n"); + dep->flags |= DWC3_EP_PENDING_REQUEST; + + if (event->endpoint_number) + dep->flags |= DWC3_EP0_DIR_IN; + return; + } + + req = next_request(&dep->request_list); + req->direction = !!event->endpoint_number; + + dwc->ep0state = EP0_DATA_PHASE; + if (req->request.length == 0) { + ret = dwc3_ep0_start_trans(dwc, event->endpoint_number, + dwc->ctrl_req_addr, 0, + DWC3_TRBCTL_CONTROL_DATA); + } else if ((req->request.length % dep->endpoint.maxpacket) + && (event->endpoint_number == 0)) { + dwc3_map_buffer_to_dma(req); + + WARN_ON(req->request.length > dep->endpoint.maxpacket); + + dwc->ep0_bounced = true; + + /* + * REVISIT in case request length is bigger than EP0 + * wMaxPacketSize, we will need two chained TRBs to handle + * the transfer. + */ + ret = dwc3_ep0_start_trans(dwc, event->endpoint_number, + dwc->ep0_bounce_addr, dep->endpoint.maxpacket, + DWC3_TRBCTL_CONTROL_DATA); + } else { + dwc3_map_buffer_to_dma(req); + + ret = dwc3_ep0_start_trans(dwc, event->endpoint_number, + req->request.dma, req->request.length, + DWC3_TRBCTL_CONTROL_DATA); + } + + WARN_ON(ret < 0); +} + +static void dwc3_ep0_do_control_status(struct dwc3 *dwc, + const struct dwc3_event_depevt *event) +{ + u32 type; + int ret; + + dwc->ep0state = EP0_STATUS_PHASE; + + type = dwc->three_stage_setup ? DWC3_TRBCTL_CONTROL_STATUS3 + : DWC3_TRBCTL_CONTROL_STATUS2; + + ret = dwc3_ep0_start_trans(dwc, event->endpoint_number, + dwc->ctrl_req_addr, 0, type); + + WARN_ON(ret < 0); +} + +static void dwc3_ep0_xfernotready(struct dwc3 *dwc, + const struct dwc3_event_depevt *event) +{ + switch (event->status) { + case DEPEVT_STATUS_CONTROL_SETUP: + dev_vdbg(dwc->dev, "Control Setup\n"); + dwc3_ep0_do_control_setup(dwc, event); + break; + + case DEPEVT_STATUS_CONTROL_DATA: + dev_vdbg(dwc->dev, "Control Data\n"); + + if (dwc->ep0_next_event != DWC3_EP0_NRDY_DATA) { + dev_vdbg(dwc->dev, "Expected %d got %d\n", + dwc->ep0_next_event, + DWC3_EP0_NRDY_DATA); + + dwc3_ep0_stall_and_restart(dwc); + return; + } + + /* + * One of the possible error cases is when Host _does_ + * request for Data Phase, but it does so on the wrong + * direction. + * + * Here, we already know ep0_next_event is DATA (see above), + * so we only need to check for direction. + */ + if (dwc->ep0_expect_in != event->endpoint_number) { + dev_vdbg(dwc->dev, "Wrong direction for Data phase\n"); + dwc3_ep0_stall_and_restart(dwc); + return; + } + + dwc3_ep0_do_control_data(dwc, event); + break; + + case DEPEVT_STATUS_CONTROL_STATUS: + dev_vdbg(dwc->dev, "Control Status\n"); + + if (dwc->ep0_next_event != DWC3_EP0_NRDY_STATUS) { + dev_vdbg(dwc->dev, "Expected %d got %d\n", + dwc->ep0_next_event, + DWC3_EP0_NRDY_STATUS); + + dwc3_ep0_stall_and_restart(dwc); + return; + } + dwc3_ep0_do_control_status(dwc, event); + } +} + +void dwc3_ep0_interrupt(struct dwc3 *dwc, + const const struct dwc3_event_depevt *event) +{ + u8 epnum = event->endpoint_number; + + dev_dbg(dwc->dev, "%s while ep%d%s in state '%s'\n", + dwc3_ep_event_string(event->endpoint_event), + epnum >> 1, (epnum & 1) ? "in" : "out", + dwc3_ep0_state_string(dwc->ep0state)); + + switch (event->endpoint_event) { + case DWC3_DEPEVT_XFERCOMPLETE: + dwc3_ep0_xfer_complete(dwc, event); + break; + + case DWC3_DEPEVT_XFERNOTREADY: + dwc3_ep0_xfernotready(dwc, event); + break; + + case DWC3_DEPEVT_XFERINPROGRESS: + case DWC3_DEPEVT_RXTXFIFOEVT: + case DWC3_DEPEVT_STREAMEVT: + case DWC3_DEPEVT_EPCMDCMPLT: + break; + } +} diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c new file mode 100644 index 000000000000..fa824cfdd2eb --- /dev/null +++ b/drivers/usb/dwc3/gadget.c @@ -0,0 +1,2104 @@ +/** + * gadget.c - DesignWare USB3 DRD Controller Gadget Framework Link + * + * Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com + * + * Authors: Felipe Balbi <balbi@ti.com>, + * Sebastian Andrzej Siewior <bigeasy@linutronix.de> + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. The names of the above-listed copyright holders may not be used + * to endorse or promote products derived from this software without + * specific prior written permission. + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2, as published by the Free + * Software Foundation. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS + * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, + * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR + * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR + * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, + * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, + * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR + * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/slab.h> +#include <linux/spinlock.h> +#include <linux/platform_device.h> +#include <linux/pm_runtime.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/list.h> +#include <linux/dma-mapping.h> + +#include <linux/usb/ch9.h> +#include <linux/usb/gadget.h> + +#include "core.h" +#include "gadget.h" +#include "io.h" + +#define DMA_ADDR_INVALID (~(dma_addr_t)0) + +void dwc3_map_buffer_to_dma(struct dwc3_request *req) +{ + struct dwc3 *dwc = req->dep->dwc; + + if (req->request.length == 0) { + /* req->request.dma = dwc->setup_buf_addr; */ + return; + } + + if (req->request.dma == DMA_ADDR_INVALID) { + req->request.dma = dma_map_single(dwc->dev, req->request.buf, + req->request.length, req->direction + ? DMA_TO_DEVICE : DMA_FROM_DEVICE); + req->mapped = true; + } +} + +void dwc3_unmap_buffer_from_dma(struct dwc3_request *req) +{ + struct dwc3 *dwc = req->dep->dwc; + + if (req->request.length == 0) { + req->request.dma = DMA_ADDR_INVALID; + return; + } + + if (req->mapped) { + dma_unmap_single(dwc->dev, req->request.dma, + req->request.length, req->direction + ? DMA_TO_DEVICE : DMA_FROM_DEVICE); + req->mapped = 0; + req->request.dma = DMA_ADDR_INVALID; + } +} + +void dwc3_gadget_giveback(struct dwc3_ep *dep, struct dwc3_request *req, + int status) +{ + struct dwc3 *dwc = dep->dwc; + + if (req->queued) { + dep->busy_slot++; + /* + * Skip LINK TRB. We can't use req->trb and check for + * DWC3_TRBCTL_LINK_TRB because it points the TRB we just + * completed (not the LINK TRB). + */ + if (((dep->busy_slot & DWC3_TRB_MASK) == DWC3_TRB_NUM - 1) && + usb_endpoint_xfer_isoc(dep->desc)) + dep->busy_slot++; + } + list_del(&req->list); + + if (req->request.status == -EINPROGRESS) + req->request.status = status; + + dwc3_unmap_buffer_from_dma(req); + + dev_dbg(dwc->dev, "request %p from %s completed %d/%d ===> %d\n", + req, dep->name, req->request.actual, + req->request.length, status); + + spin_unlock(&dwc->lock); + req->request.complete(&req->dep->endpoint, &req->request); + spin_lock(&dwc->lock); +} + +static const char *dwc3_gadget_ep_cmd_string(u8 cmd) +{ + switch (cmd) { + case DWC3_DEPCMD_DEPSTARTCFG: + return "Start New Configuration"; + case DWC3_DEPCMD_ENDTRANSFER: + return "End Transfer"; + case DWC3_DEPCMD_UPDATETRANSFER: + return "Update Transfer"; + case DWC3_DEPCMD_STARTTRANSFER: + return "Start Transfer"; + case DWC3_DEPCMD_CLEARSTALL: + return "Clear Stall"; + case DWC3_DEPCMD_SETSTALL: + return "Set Stall"; + case DWC3_DEPCMD_GETSEQNUMBER: + return "Get Data Sequence Number"; + case DWC3_DEPCMD_SETTRANSFRESOURCE: + return "Set Endpoint Transfer Resource"; + case DWC3_DEPCMD_SETEPCONFIG: + return "Set Endpoint Configuration"; + default: + return "UNKNOWN command"; + } +} + +int dwc3_send_gadget_ep_cmd(struct dwc3 *dwc, unsigned ep, + unsigned cmd, struct dwc3_gadget_ep_cmd_params *params) +{ + struct dwc3_ep *dep = dwc->eps[ep]; + u32 timeout = 500; + u32 reg; + + dev_vdbg(dwc->dev, "%s: cmd '%s' params %08x %08x %08x\n", + dep->name, + dwc3_gadget_ep_cmd_string(cmd), params->param0, + params->param1, params->param2); + + dwc3_writel(dwc->regs, DWC3_DEPCMDPAR0(ep), params->param0); + dwc3_writel(dwc->regs, DWC3_DEPCMDPAR1(ep), params->param1); + dwc3_writel(dwc->regs, DWC3_DEPCMDPAR2(ep), params->param2); + + dwc3_writel(dwc->regs, DWC3_DEPCMD(ep), cmd | DWC3_DEPCMD_CMDACT); + do { + reg = dwc3_readl(dwc->regs, DWC3_DEPCMD(ep)); + if (!(reg & DWC3_DEPCMD_CMDACT)) { + dev_vdbg(dwc->dev, "Command Complete --> %d\n", + DWC3_DEPCMD_STATUS(reg)); + return 0; + } + + /* + * We can't sleep here, because it is also called from + * interrupt context. + */ + timeout--; + if (!timeout) + return -ETIMEDOUT; + + udelay(1); + } while (1); +} + +static dma_addr_t dwc3_trb_dma_offset(struct dwc3_ep *dep, + struct dwc3_trb_hw *trb) +{ + u32 offset = (char *) trb - (char *) dep->trb_pool; + + return dep->trb_pool_dma + offset; +} + +static int dwc3_alloc_trb_pool(struct dwc3_ep *dep) +{ + struct dwc3 *dwc = dep->dwc; + + if (dep->trb_pool) + return 0; + + if (dep->number == 0 || dep->number == 1) + return 0; + + dep->trb_pool = dma_alloc_coherent(dwc->dev, + sizeof(struct dwc3_trb) * DWC3_TRB_NUM, + &dep->trb_pool_dma, GFP_KERNEL); + if (!dep->trb_pool) { + dev_err(dep->dwc->dev, "failed to allocate trb pool for %s\n", + dep->name); + return -ENOMEM; + } + + return 0; +} + +static void dwc3_free_trb_pool(struct dwc3_ep *dep) +{ + struct dwc3 *dwc = dep->dwc; + + dma_free_coherent(dwc->dev, sizeof(struct dwc3_trb) * DWC3_TRB_NUM, + dep->trb_pool, dep->trb_pool_dma); + + dep->trb_pool = NULL; + dep->trb_pool_dma = 0; +} + +static int dwc3_gadget_start_config(struct dwc3 *dwc, struct dwc3_ep *dep) +{ + struct dwc3_gadget_ep_cmd_params params; + u32 cmd; + + memset(¶ms, 0x00, sizeof(params)); + + if (dep->number != 1) { + cmd = DWC3_DEPCMD_DEPSTARTCFG; + /* XferRscIdx == 0 for ep0 and 2 for the remaining */ + if (dep->number > 1) { + if (dwc->start_config_issued) + return 0; + dwc->start_config_issued = true; + cmd |= DWC3_DEPCMD_PARAM(2); + } + + return dwc3_send_gadget_ep_cmd(dwc, 0, cmd, ¶ms); + } + + return 0; +} + +static int dwc3_gadget_set_ep_config(struct dwc3 *dwc, struct dwc3_ep *dep, + const struct usb_endpoint_descriptor *desc) +{ + struct dwc3_gadget_ep_cmd_params params; + + memset(¶ms, 0x00, sizeof(params)); + + params.param0 = DWC3_DEPCFG_EP_TYPE(usb_endpoint_type(desc)) + | DWC3_DEPCFG_MAX_PACKET_SIZE(usb_endpoint_maxp(desc)) + | DWC3_DEPCFG_BURST_SIZE(dep->endpoint.maxburst); + + params.param1 = DWC3_DEPCFG_XFER_COMPLETE_EN + | DWC3_DEPCFG_XFER_NOT_READY_EN; + + if (usb_endpoint_xfer_bulk(desc) && dep->endpoint.max_streams) { + params.param1 |= DWC3_DEPCFG_STREAM_CAPABLE + | DWC3_DEPCFG_STREAM_EVENT_EN; + dep->stream_capable = true; + } + + if (usb_endpoint_xfer_isoc(desc)) + params.param1 |= DWC3_DEPCFG_XFER_IN_PROGRESS_EN; + + /* + * We are doing 1:1 mapping for endpoints, meaning + * Physical Endpoints 2 maps to Logical Endpoint 2 and + * so on. We consider the direction bit as part of the physical + * endpoint number. So USB endpoint 0x81 is 0x03. + */ + params.param1 |= DWC3_DEPCFG_EP_NUMBER(dep->number); + + /* + * We must use the lower 16 TX FIFOs even though + * HW might have more + */ + if (dep->direction) + params.param0 |= DWC3_DEPCFG_FIFO_NUMBER(dep->number >> 1); + + if (desc->bInterval) { + params.param1 |= DWC3_DEPCFG_BINTERVAL_M1(desc->bInterval - 1); + dep->interval = 1 << (desc->bInterval - 1); + } + + return dwc3_send_gadget_ep_cmd(dwc, dep->number, + DWC3_DEPCMD_SETEPCONFIG, ¶ms); +} + +static int dwc3_gadget_set_xfer_resource(struct dwc3 *dwc, struct dwc3_ep *dep) +{ + struct dwc3_gadget_ep_cmd_params params; + + memset(¶ms, 0x00, sizeof(params)); + + params.param0 = DWC3_DEPXFERCFG_NUM_XFER_RES(1); + + return dwc3_send_gadget_ep_cmd(dwc, dep->number, + DWC3_DEPCMD_SETTRANSFRESOURCE, ¶ms); +} + +/** + * __dwc3_gadget_ep_enable - Initializes a HW endpoint + * @dep: endpoint to be initialized + * @desc: USB Endpoint Descriptor + * + * Caller should take care of locking + */ +static int __dwc3_gadget_ep_enable(struct dwc3_ep *dep, + const struct usb_endpoint_descriptor *desc) +{ + struct dwc3 *dwc = dep->dwc; + u32 reg; + int ret = -ENOMEM; + + if (!(dep->flags & DWC3_EP_ENABLED)) { + ret = dwc3_gadget_start_config(dwc, dep); + if (ret) + return ret; + } + + ret = dwc3_gadget_set_ep_config(dwc, dep, desc); + if (ret) + return ret; + + if (!(dep->flags & DWC3_EP_ENABLED)) { + struct dwc3_trb_hw *trb_st_hw; + struct dwc3_trb_hw *trb_link_hw; + struct dwc3_trb trb_link; + + ret = dwc3_gadget_set_xfer_resource(dwc, dep); + if (ret) + return ret; + + dep->desc = desc; + dep->type = usb_endpoint_type(desc); + dep->flags |= DWC3_EP_ENABLED; + + reg = dwc3_readl(dwc->regs, DWC3_DALEPENA); + reg |= DWC3_DALEPENA_EP(dep->number); + dwc3_writel(dwc->regs, DWC3_DALEPENA, reg); + + if (!usb_endpoint_xfer_isoc(desc)) + return 0; + + memset(&trb_link, 0, sizeof(trb_link)); + + /* Link TRB for ISOC. The HWO but is never reset */ + trb_st_hw = &dep->trb_pool[0]; + + trb_link.bplh = dwc3_trb_dma_offset(dep, trb_st_hw); + trb_link.trbctl = DWC3_TRBCTL_LINK_TRB; + trb_link.hwo = true; + + trb_link_hw = &dep->trb_pool[DWC3_TRB_NUM - 1]; + dwc3_trb_to_hw(&trb_link, trb_link_hw); + } + + return 0; +} + +static void dwc3_stop_active_transfer(struct dwc3 *dwc, u32 epnum); +static void dwc3_remove_requests(struct dwc3 *dwc, struct dwc3_ep *dep) +{ + struct dwc3_request *req; + + if (!list_empty(&dep->req_queued)) + dwc3_stop_active_transfer(dwc, dep->number); + + while (!list_empty(&dep->request_list)) { + req = next_request(&dep->request_list); + + dwc3_gadget_giveback(dep, req, -ESHUTDOWN); + } +} + +/** + * __dwc3_gadget_ep_disable - Disables a HW endpoint + * @dep: the endpoint to disable + * + * This function also removes requests which are currently processed ny the + * hardware and those which are not yet scheduled. + * Caller should take care of locking. + */ +static int __dwc3_gadget_ep_disable(struct dwc3_ep *dep) +{ + struct dwc3 *dwc = dep->dwc; + u32 reg; + + dwc3_remove_requests(dwc, dep); + + reg = dwc3_readl(dwc->regs, DWC3_DALEPENA); + reg &= ~DWC3_DALEPENA_EP(dep->number); + dwc3_writel(dwc->regs, DWC3_DALEPENA, reg); + + dep->stream_capable = false; + dep->desc = NULL; + dep->type = 0; + dep->flags = 0; + + return 0; +} + +/* -------------------------------------------------------------------------- */ + +static int dwc3_gadget_ep0_enable(struct usb_ep *ep, + const struct usb_endpoint_descriptor *desc) +{ + return -EINVAL; +} + +static int dwc3_gadget_ep0_disable(struct usb_ep *ep) +{ + return -EINVAL; +} + +/* -------------------------------------------------------------------------- */ + +static int dwc3_gadget_ep_enable(struct usb_ep *ep, + const struct usb_endpoint_descriptor *desc) +{ + struct dwc3_ep *dep; + struct dwc3 *dwc; + unsigned long flags; + int ret; + + if (!ep || !desc || desc->bDescriptorType != USB_DT_ENDPOINT) { + pr_debug("dwc3: invalid parameters\n"); + return -EINVAL; + } + + if (!desc->wMaxPacketSize) { + pr_debug("dwc3: missing wMaxPacketSize\n"); + return -EINVAL; + } + + dep = to_dwc3_ep(ep); + dwc = dep->dwc; + + switch (usb_endpoint_type(desc)) { + case USB_ENDPOINT_XFER_CONTROL: + strncat(dep->name, "-control", sizeof(dep->name)); + break; + case USB_ENDPOINT_XFER_ISOC: + strncat(dep->name, "-isoc", sizeof(dep->name)); + break; + case USB_ENDPOINT_XFER_BULK: + strncat(dep->name, "-bulk", sizeof(dep->name)); + break; + case USB_ENDPOINT_XFER_INT: + strncat(dep->name, "-int", sizeof(dep->name)); + break; + default: + dev_err(dwc->dev, "invalid endpoint transfer type\n"); + } + + if (dep->flags & DWC3_EP_ENABLED) { + dev_WARN_ONCE(dwc->dev, true, "%s is already enabled\n", + dep->name); + return 0; + } + + dev_vdbg(dwc->dev, "Enabling %s\n", dep->name); + + spin_lock_irqsave(&dwc->lock, flags); + ret = __dwc3_gadget_ep_enable(dep, desc); + spin_unlock_irqrestore(&dwc->lock, flags); + + return ret; +} + +static int dwc3_gadget_ep_disable(struct usb_ep *ep) +{ + struct dwc3_ep *dep; + struct dwc3 *dwc; + unsigned long flags; + int ret; + + if (!ep) { + pr_debug("dwc3: invalid parameters\n"); + return -EINVAL; + } + + dep = to_dwc3_ep(ep); + dwc = dep->dwc; + + if (!(dep->flags & DWC3_EP_ENABLED)) { + dev_WARN_ONCE(dwc->dev, true, "%s is already disabled\n", + dep->name); + return 0; + } + + snprintf(dep->name, sizeof(dep->name), "ep%d%s", + dep->number >> 1, + (dep->number & 1) ? "in" : "out"); + + spin_lock_irqsave(&dwc->lock, flags); + ret = __dwc3_gadget_ep_disable(dep); + spin_unlock_irqrestore(&dwc->lock, flags); + + return ret; +} + +static struct usb_request *dwc3_gadget_ep_alloc_request(struct usb_ep *ep, + gfp_t gfp_flags) +{ + struct dwc3_request *req; + struct dwc3_ep *dep = to_dwc3_ep(ep); + struct dwc3 *dwc = dep->dwc; + + req = kzalloc(sizeof(*req), gfp_flags); + if (!req) { + dev_err(dwc->dev, "not enough memory\n"); + return NULL; + } + + req->epnum = dep->number; + req->dep = dep; + req->request.dma = DMA_ADDR_INVALID; + + return &req->request; +} + +static void dwc3_gadget_ep_free_request(struct usb_ep *ep, + struct usb_request *request) +{ + struct dwc3_request *req = to_dwc3_request(request); + + kfree(req); +} + +/* + * dwc3_prepare_trbs - setup TRBs from requests + * @dep: endpoint for which requests are being prepared + * @starting: true if the endpoint is idle and no requests are queued. + * + * The functions goes through the requests list and setups TRBs for the + * transfers. The functions returns once there are not more TRBs available or + * it run out of requests. + */ +static struct dwc3_request *dwc3_prepare_trbs(struct dwc3_ep *dep, + bool starting) +{ + struct dwc3_request *req, *n, *ret = NULL; + struct dwc3_trb_hw *trb_hw; + struct dwc3_trb trb; + u32 trbs_left; + + BUILD_BUG_ON_NOT_POWER_OF_2(DWC3_TRB_NUM); + + /* the first request must not be queued */ + trbs_left = (dep->busy_slot - dep->free_slot) & DWC3_TRB_MASK; + /* + * if busy & slot are equal than it is either full or empty. If we are + * starting to proceed requests then we are empty. Otherwise we ar + * full and don't do anything + */ + if (!trbs_left) { + if (!starting) + return NULL; + trbs_left = DWC3_TRB_NUM; + /* + * In case we start from scratch, we queue the ISOC requests + * starting from slot 1. This is done because we use ring + * buffer and have no LST bit to stop us. Instead, we place + * IOC bit TRB_NUM/4. We try to avoid to having an interrupt + * after the first request so we start at slot 1 and have + * 7 requests proceed before we hit the first IOC. + * Other transfer types don't use the ring buffer and are + * processed from the first TRB until the last one. Since we + * don't wrap around we have to start at the beginning. + */ + if (usb_endpoint_xfer_isoc(dep->desc)) { + dep->busy_slot = 1; + dep->free_slot = 1; + } else { + dep->busy_slot = 0; + dep->free_slot = 0; + } + } + + /* The last TRB is a link TRB, not used for xfer */ + if ((trbs_left <= 1) && usb_endpoint_xfer_isoc(dep->desc)) + return NULL; + + list_for_each_entry_safe(req, n, &dep->request_list, list) { + unsigned int last_one = 0; + unsigned int cur_slot; + + trb_hw = &dep->trb_pool[dep->free_slot & DWC3_TRB_MASK]; + cur_slot = dep->free_slot; + dep->free_slot++; + + /* Skip the LINK-TRB on ISOC */ + if (((cur_slot & DWC3_TRB_MASK) == DWC3_TRB_NUM - 1) && + usb_endpoint_xfer_isoc(dep->desc)) + continue; + + dwc3_gadget_move_request_queued(req); + memset(&trb, 0, sizeof(trb)); + trbs_left--; + + /* Is our TRB pool empty? */ + if (!trbs_left) + last_one = 1; + /* Is this the last request? */ + if (list_empty(&dep->request_list)) + last_one = 1; + + /* + * FIXME we shouldn't need to set LST bit always but we are + * facing some weird problem with the Hardware where it doesn't + * complete even though it has been previously started. + * + * While we're debugging the problem, as a workaround to + * multiple TRBs handling, use only one TRB at a time. + */ + last_one = 1; + + req->trb = trb_hw; + if (!ret) + ret = req; + + trb.bplh = req->request.dma; + + if (usb_endpoint_xfer_isoc(dep->desc)) { + trb.isp_imi = true; + trb.csp = true; + } else { + trb.lst = last_one; + } + + if (usb_endpoint_xfer_bulk(dep->desc) && dep->stream_capable) + trb.sid_sofn = req->request.stream_id; + + switch (usb_endpoint_type(dep->desc)) { + case USB_ENDPOINT_XFER_CONTROL: + trb.trbctl = DWC3_TRBCTL_CONTROL_SETUP; + break; + + case USB_ENDPOINT_XFER_ISOC: + trb.trbctl = DWC3_TRBCTL_ISOCHRONOUS_FIRST; + + /* IOC every DWC3_TRB_NUM / 4 so we can refill */ + if (!(cur_slot % (DWC3_TRB_NUM / 4))) + trb.ioc = last_one; + break; + + case USB_ENDPOINT_XFER_BULK: + case USB_ENDPOINT_XFER_INT: + trb.trbctl = DWC3_TRBCTL_NORMAL; + break; + default: + /* + * This is only possible with faulty memory because we + * checked it already :) + */ + BUG(); + } + + trb.length = req->request.length; + trb.hwo = true; + + dwc3_trb_to_hw(&trb, trb_hw); + req->trb_dma = dwc3_trb_dma_offset(dep, trb_hw); + + if (last_one) + break; + } + + return ret; +} + +static int __dwc3_gadget_kick_transfer(struct dwc3_ep *dep, u16 cmd_param, + int start_new) +{ + struct dwc3_gadget_ep_cmd_params params; + struct dwc3_request *req; + struct dwc3 *dwc = dep->dwc; + int ret; + u32 cmd; + + if (start_new && (dep->flags & DWC3_EP_BUSY)) { + dev_vdbg(dwc->dev, "%s: endpoint busy\n", dep->name); + return -EBUSY; + } + dep->flags &= ~DWC3_EP_PENDING_REQUEST; + + /* + * If we are getting here after a short-out-packet we don't enqueue any + * new requests as we try to set the IOC bit only on the last request. + */ + if (start_new) { + if (list_empty(&dep->req_queued)) + dwc3_prepare_trbs(dep, start_new); + + /* req points to the first request which will be sent */ + req = next_request(&dep->req_queued); + } else { + /* + * req points to the first request where HWO changed + * from 0 to 1 + */ + req = dwc3_prepare_trbs(dep, start_new); + } + if (!req) { + dep->flags |= DWC3_EP_PENDING_REQUEST; + return 0; + } + + memset(¶ms, 0, sizeof(params)); + params.param0 = upper_32_bits(req->trb_dma); + params.param1 = lower_32_bits(req->trb_dma); + + if (start_new) + cmd = DWC3_DEPCMD_STARTTRANSFER; + else + cmd = DWC3_DEPCMD_UPDATETRANSFER; + + cmd |= DWC3_DEPCMD_PARAM(cmd_param); + ret = dwc3_send_gadget_ep_cmd(dwc, dep->number, cmd, ¶ms); + if (ret < 0) { + dev_dbg(dwc->dev, "failed to send STARTTRANSFER command\n"); + + /* + * FIXME we need to iterate over the list of requests + * here and stop, unmap, free and del each of the linked + * requests instead of we do now. + */ + dwc3_unmap_buffer_from_dma(req); + list_del(&req->list); + return ret; + } + + dep->flags |= DWC3_EP_BUSY; + dep->res_trans_idx = dwc3_gadget_ep_get_transfer_index(dwc, + dep->number); + if (!dep->res_trans_idx) + printk_once(KERN_ERR "%s() res_trans_idx is invalid\n", __func__); + return 0; +} + +static int __dwc3_gadget_ep_queue(struct dwc3_ep *dep, struct dwc3_request *req) +{ + req->request.actual = 0; + req->request.status = -EINPROGRESS; + req->direction = dep->direction; + req->epnum = dep->number; + + /* + * We only add to our list of requests now and + * start consuming the list once we get XferNotReady + * IRQ. + * + * That way, we avoid doing anything that we don't need + * to do now and defer it until the point we receive a + * particular token from the Host side. + * + * This will also avoid Host cancelling URBs due to too + * many NACKs. + */ + dwc3_map_buffer_to_dma(req); + list_add_tail(&req->list, &dep->request_list); + + /* + * There is one special case: XferNotReady with + * empty list of requests. We need to kick the + * transfer here in that situation, otherwise + * we will be NAKing forever. + * + * If we get XferNotReady before gadget driver + * has a chance to queue a request, we will ACK + * the IRQ but won't be able to receive the data + * until the next request is queued. The following + * code is handling exactly that. + */ + if (dep->flags & DWC3_EP_PENDING_REQUEST) { + int ret; + int start_trans; + + start_trans = 1; + if (usb_endpoint_xfer_isoc(dep->endpoint.desc) && + dep->flags & DWC3_EP_BUSY) + start_trans = 0; + + ret = __dwc3_gadget_kick_transfer(dep, 0, start_trans); + if (ret && ret != -EBUSY) { + struct dwc3 *dwc = dep->dwc; + + dev_dbg(dwc->dev, "%s: failed to kick transfers\n", + dep->name); + } + }; + + return 0; +} + +static int dwc3_gadget_ep_queue(struct usb_ep *ep, struct usb_request *request, + gfp_t gfp_flags) +{ + struct dwc3_request *req = to_dwc3_request(request); + struct dwc3_ep *dep = to_dwc3_ep(ep); + struct dwc3 *dwc = dep->dwc; + + unsigned long flags; + + int ret; + + if (!dep->desc) { + dev_dbg(dwc->dev, "trying to queue request %p to disabled %s\n", + request, ep->name); + return -ESHUTDOWN; + } + + dev_vdbg(dwc->dev, "queing request %p to %s length %d\n", + request, ep->name, request->length); + + spin_lock_irqsave(&dwc->lock, flags); + ret = __dwc3_gadget_ep_queue(dep, req); + spin_unlock_irqrestore(&dwc->lock, flags); + + return ret; +} + +static int dwc3_gadget_ep_dequeue(struct usb_ep *ep, + struct usb_request *request) +{ + struct dwc3_request *req = to_dwc3_request(request); + struct dwc3_request *r = NULL; + + struct dwc3_ep *dep = to_dwc3_ep(ep); + struct dwc3 *dwc = dep->dwc; + + unsigned long flags; + int ret = 0; + + spin_lock_irqsave(&dwc->lock, flags); + + list_for_each_entry(r, &dep->request_list, list) { + if (r == req) + break; + } + + if (r != req) { + list_for_each_entry(r, &dep->req_queued, list) { + if (r == req) + break; + } + if (r == req) { + /* wait until it is processed */ + dwc3_stop_active_transfer(dwc, dep->number); + goto out0; + } + dev_err(dwc->dev, "request %p was not queued to %s\n", + request, ep->name); + ret = -EINVAL; + goto out0; + } + + /* giveback the request */ + dwc3_gadget_giveback(dep, req, -ECONNRESET); + +out0: + spin_unlock_irqrestore(&dwc->lock, flags); + + return ret; +} + +int __dwc3_gadget_ep_set_halt(struct dwc3_ep *dep, int value) +{ + struct dwc3_gadget_ep_cmd_params params; + struct dwc3 *dwc = dep->dwc; + int ret; + + memset(¶ms, 0x00, sizeof(params)); + + if (value) { + if (dep->number == 0 || dep->number == 1) { + /* + * Whenever EP0 is stalled, we will restart + * the state machine, thus moving back to + * Setup Phase + */ + dwc->ep0state = EP0_SETUP_PHASE; + } + + ret = dwc3_send_gadget_ep_cmd(dwc, dep->number, + DWC3_DEPCMD_SETSTALL, ¶ms); + if (ret) + dev_err(dwc->dev, "failed to %s STALL on %s\n", + value ? "set" : "clear", + dep->name); + else + dep->flags |= DWC3_EP_STALL; + } else { + if (dep->flags & DWC3_EP_WEDGE) + return 0; + + ret = dwc3_send_gadget_ep_cmd(dwc, dep->number, + DWC3_DEPCMD_CLEARSTALL, ¶ms); + if (ret) + dev_err(dwc->dev, "failed to %s STALL on %s\n", + value ? "set" : "clear", + dep->name); + else + dep->flags &= ~DWC3_EP_STALL; + } + + return ret; +} + +static int dwc3_gadget_ep_set_halt(struct usb_ep *ep, int value) +{ + struct dwc3_ep *dep = to_dwc3_ep(ep); + struct dwc3 *dwc = dep->dwc; + + unsigned long flags; + + int ret; + + spin_lock_irqsave(&dwc->lock, flags); + + if (usb_endpoint_xfer_isoc(dep->desc)) { + dev_err(dwc->dev, "%s is of Isochronous type\n", dep->name); + ret = -EINVAL; + goto out; + } + + ret = __dwc3_gadget_ep_set_halt(dep, value); +out: + spin_unlock_irqrestore(&dwc->lock, flags); + + return ret; +} + +static int dwc3_gadget_ep_set_wedge(struct usb_ep *ep) +{ + struct dwc3_ep *dep = to_dwc3_ep(ep); + + dep->flags |= DWC3_EP_WEDGE; + + return dwc3_gadget_ep_set_halt(ep, 1); +} + +/* -------------------------------------------------------------------------- */ + +static struct usb_endpoint_descriptor dwc3_gadget_ep0_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + .bmAttributes = USB_ENDPOINT_XFER_CONTROL, +}; + +static const struct usb_ep_ops dwc3_gadget_ep0_ops = { + .enable = dwc3_gadget_ep0_enable, + .disable = dwc3_gadget_ep0_disable, + .alloc_request = dwc3_gadget_ep_alloc_request, + .free_request = dwc3_gadget_ep_free_request, + .queue = dwc3_gadget_ep0_queue, + .dequeue = dwc3_gadget_ep_dequeue, + .set_halt = dwc3_gadget_ep_set_halt, + .set_wedge = dwc3_gadget_ep_set_wedge, +}; + +static const struct usb_ep_ops dwc3_gadget_ep_ops = { + .enable = dwc3_gadget_ep_enable, + .disable = dwc3_gadget_ep_disable, + .alloc_request = dwc3_gadget_ep_alloc_request, + .free_request = dwc3_gadget_ep_free_request, + .queue = dwc3_gadget_ep_queue, + .dequeue = dwc3_gadget_ep_dequeue, + .set_halt = dwc3_gadget_ep_set_halt, + .set_wedge = dwc3_gadget_ep_set_wedge, +}; + +/* -------------------------------------------------------------------------- */ + +static int dwc3_gadget_get_frame(struct usb_gadget *g) +{ + struct dwc3 *dwc = gadget_to_dwc(g); + u32 reg; + + reg = dwc3_readl(dwc->regs, DWC3_DSTS); + return DWC3_DSTS_SOFFN(reg); +} + +static int dwc3_gadget_wakeup(struct usb_gadget *g) +{ + struct dwc3 *dwc = gadget_to_dwc(g); + + unsigned long timeout; + unsigned long flags; + + u32 reg; + + int ret = 0; + + u8 link_state; + u8 speed; + + spin_lock_irqsave(&dwc->lock, flags); + + /* + * According to the Databook Remote wakeup request should + * be issued only when the device is in early suspend state. + * + * We can check that via USB Link State bits in DSTS register. + */ + reg = dwc3_readl(dwc->regs, DWC3_DSTS); + + speed = reg & DWC3_DSTS_CONNECTSPD; + if (speed == DWC3_DSTS_SUPERSPEED) { + dev_dbg(dwc->dev, "no wakeup on SuperSpeed\n"); + ret = -EINVAL; + goto out; + } + + link_state = DWC3_DSTS_USBLNKST(reg); + + switch (link_state) { + case DWC3_LINK_STATE_RX_DET: /* in HS, means Early Suspend */ + case DWC3_LINK_STATE_U3: /* in HS, means SUSPEND */ + break; + default: + dev_dbg(dwc->dev, "can't wakeup from link state %d\n", + link_state); + ret = -EINVAL; + goto out; + } + + reg = dwc3_readl(dwc->regs, DWC3_DCTL); + + /* + * Switch link state to Recovery. In HS/FS/LS this means + * RemoteWakeup Request + */ + reg |= DWC3_DCTL_ULSTCHNG_RECOVERY; + dwc3_writel(dwc->regs, DWC3_DCTL, reg); + + /* wait for at least 2000us */ + usleep_range(2000, 2500); + + /* write zeroes to Link Change Request */ + reg &= ~DWC3_DCTL_ULSTCHNGREQ_MASK; + dwc3_writel(dwc->regs, DWC3_DCTL, reg); + + /* pool until Link State change to ON */ + timeout = jiffies + msecs_to_jiffies(100); + + while (!(time_after(jiffies, timeout))) { + reg = dwc3_readl(dwc->regs, DWC3_DSTS); + + /* in HS, means ON */ + if (DWC3_DSTS_USBLNKST(reg) == DWC3_LINK_STATE_U0) + break; + } + + if (DWC3_DSTS_USBLNKST(reg) != DWC3_LINK_STATE_U0) { + dev_err(dwc->dev, "failed to send remote wakeup\n"); + ret = -EINVAL; + } + +out: + spin_unlock_irqrestore(&dwc->lock, flags); + + return ret; +} + +static int dwc3_gadget_set_selfpowered(struct usb_gadget *g, + int is_selfpowered) +{ + struct dwc3 *dwc = gadget_to_dwc(g); + + dwc->is_selfpowered = !!is_selfpowered; + + return 0; +} + +static void dwc3_gadget_run_stop(struct dwc3 *dwc, int is_on) +{ + u32 reg; + u32 timeout = 500; + + reg = dwc3_readl(dwc->regs, DWC3_DCTL); + if (is_on) + reg |= DWC3_DCTL_RUN_STOP; + else + reg &= ~DWC3_DCTL_RUN_STOP; + + dwc3_writel(dwc->regs, DWC3_DCTL, reg); + + do { + reg = dwc3_readl(dwc->regs, DWC3_DSTS); + if (is_on) { + if (!(reg & DWC3_DSTS_DEVCTRLHLT)) + break; + } else { + if (reg & DWC3_DSTS_DEVCTRLHLT) + break; + } + timeout--; + if (!timeout) + break; + udelay(1); + } while (1); + + dev_vdbg(dwc->dev, "gadget %s data soft-%s\n", + dwc->gadget_driver + ? dwc->gadget_driver->function : "no-function", + is_on ? "connect" : "disconnect"); +} + +static int dwc3_gadget_pullup(struct usb_gadget *g, int is_on) +{ + struct dwc3 *dwc = gadget_to_dwc(g); + unsigned long flags; + + is_on = !!is_on; + + spin_lock_irqsave(&dwc->lock, flags); + dwc3_gadget_run_stop(dwc, is_on); + spin_unlock_irqrestore(&dwc->lock, flags); + + return 0; +} + +static int dwc3_gadget_start(struct usb_gadget *g, + struct usb_gadget_driver *driver) +{ + struct dwc3 *dwc = gadget_to_dwc(g); + struct dwc3_ep *dep; + unsigned long flags; + int ret = 0; + u32 reg; + + spin_lock_irqsave(&dwc->lock, flags); + + if (dwc->gadget_driver) { + dev_err(dwc->dev, "%s is already bound to %s\n", + dwc->gadget.name, + dwc->gadget_driver->driver.name); + ret = -EBUSY; + goto err0; + } + + dwc->gadget_driver = driver; + dwc->gadget.dev.driver = &driver->driver; + + reg = dwc3_readl(dwc->regs, DWC3_GCTL); + + reg &= ~DWC3_GCTL_SCALEDOWN(3); + reg &= ~DWC3_GCTL_PRTCAPDIR(DWC3_GCTL_PRTCAP_OTG); + reg &= ~DWC3_GCTL_DISSCRAMBLE; + reg |= DWC3_GCTL_PRTCAPDIR(DWC3_GCTL_PRTCAP_DEVICE); + + switch (DWC3_GHWPARAMS1_EN_PWROPT(dwc->hwparams.hwparams0)) { + case DWC3_GHWPARAMS1_EN_PWROPT_CLK: + reg &= ~DWC3_GCTL_DSBLCLKGTNG; + break; + default: + dev_dbg(dwc->dev, "No power optimization available\n"); + } + + /* + * WORKAROUND: DWC3 revisions <1.90a have a bug + * when The device fails to connect at SuperSpeed + * and falls back to high-speed mode which causes + * the device to enter in a Connect/Disconnect loop + */ + if (dwc->revision < DWC3_REVISION_190A) + reg |= DWC3_GCTL_U2RSTECN; + + dwc3_writel(dwc->regs, DWC3_GCTL, reg); + + reg = dwc3_readl(dwc->regs, DWC3_DCFG); + reg &= ~(DWC3_DCFG_SPEED_MASK); + reg |= DWC3_DCFG_SUPERSPEED; + dwc3_writel(dwc->regs, DWC3_DCFG, reg); + + dwc->start_config_issued = false; + + /* Start with SuperSpeed Default */ + dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(512); + + dep = dwc->eps[0]; + ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc); + if (ret) { + dev_err(dwc->dev, "failed to enable %s\n", dep->name); + goto err0; + } + + dep = dwc->eps[1]; + ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc); + if (ret) { + dev_err(dwc->dev, "failed to enable %s\n", dep->name); + goto err1; + } + + /* begin to receive SETUP packets */ + dwc->ep0state = EP0_SETUP_PHASE; + dwc3_ep0_out_start(dwc); + + spin_unlock_irqrestore(&dwc->lock, flags); + + return 0; + +err1: + __dwc3_gadget_ep_disable(dwc->eps[0]); + +err0: + spin_unlock_irqrestore(&dwc->lock, flags); + + return ret; +} + +static int dwc3_gadget_stop(struct usb_gadget *g, + struct usb_gadget_driver *driver) +{ + struct dwc3 *dwc = gadget_to_dwc(g); + unsigned long flags; + + spin_lock_irqsave(&dwc->lock, flags); + + __dwc3_gadget_ep_disable(dwc->eps[0]); + __dwc3_gadget_ep_disable(dwc->eps[1]); + + dwc->gadget_driver = NULL; + dwc->gadget.dev.driver = NULL; + + spin_unlock_irqrestore(&dwc->lock, flags); + + return 0; +} +static const struct usb_gadget_ops dwc3_gadget_ops = { + .get_frame = dwc3_gadget_get_frame, + .wakeup = dwc3_gadget_wakeup, + .set_selfpowered = dwc3_gadget_set_selfpowered, + .pullup = dwc3_gadget_pullup, + .udc_start = dwc3_gadget_start, + .udc_stop = dwc3_gadget_stop, +}; + +/* -------------------------------------------------------------------------- */ + +static int __devinit dwc3_gadget_init_endpoints(struct dwc3 *dwc) +{ + struct dwc3_ep *dep; + u8 epnum; + + INIT_LIST_HEAD(&dwc->gadget.ep_list); + + for (epnum = 0; epnum < DWC3_ENDPOINTS_NUM; epnum++) { + dep = kzalloc(sizeof(*dep), GFP_KERNEL); + if (!dep) { + dev_err(dwc->dev, "can't allocate endpoint %d\n", + epnum); + return -ENOMEM; + } + + dep->dwc = dwc; + dep->number = epnum; + dwc->eps[epnum] = dep; + + snprintf(dep->name, sizeof(dep->name), "ep%d%s", epnum >> 1, + (epnum & 1) ? "in" : "out"); + dep->endpoint.name = dep->name; + dep->direction = (epnum & 1); + + if (epnum == 0 || epnum == 1) { + dep->endpoint.maxpacket = 512; + dep->endpoint.ops = &dwc3_gadget_ep0_ops; + if (!epnum) + dwc->gadget.ep0 = &dep->endpoint; + } else { + int ret; + + dep->endpoint.maxpacket = 1024; + dep->endpoint.ops = &dwc3_gadget_ep_ops; + list_add_tail(&dep->endpoint.ep_list, + &dwc->gadget.ep_list); + + ret = dwc3_alloc_trb_pool(dep); + if (ret) { + dev_err(dwc->dev, "%s: failed to allocate TRB pool\n", dep->name); + return ret; + } + } + INIT_LIST_HEAD(&dep->request_list); + INIT_LIST_HEAD(&dep->req_queued); + } + + return 0; +} + +static void dwc3_gadget_free_endpoints(struct dwc3 *dwc) +{ + struct dwc3_ep *dep; + u8 epnum; + + for (epnum = 0; epnum < DWC3_ENDPOINTS_NUM; epnum++) { + dep = dwc->eps[epnum]; + dwc3_free_trb_pool(dep); + + if (epnum != 0 && epnum != 1) + list_del(&dep->endpoint.ep_list); + + kfree(dep); + } +} + +static void dwc3_gadget_release(struct device *dev) +{ + dev_dbg(dev, "%s\n", __func__); +} + +/* -------------------------------------------------------------------------- */ +static int dwc3_cleanup_done_reqs(struct dwc3 *dwc, struct dwc3_ep *dep, + const struct dwc3_event_depevt *event, int status) +{ + struct dwc3_request *req; + struct dwc3_trb trb; + unsigned int count; + unsigned int s_pkt = 0; + + do { + req = next_request(&dep->req_queued); + if (!req) + break; + + dwc3_trb_to_nat(req->trb, &trb); + + if (trb.hwo && status != -ESHUTDOWN) + /* + * We continue despite the error. There is not much we + * can do. If we don't clean in up we loop for ever. If + * we skip the TRB than it gets overwritten reused after + * a while since we use them in a ring buffer. a BUG() + * would help. Lets hope that if this occures, someone + * fixes the root cause instead of looking away :) + */ + dev_err(dwc->dev, "%s's TRB (%p) still owned by HW\n", + dep->name, req->trb); + count = trb.length; + + if (dep->direction) { + if (count) { + dev_err(dwc->dev, "incomplete IN transfer %s\n", + dep->name); + status = -ECONNRESET; + } + } else { + if (count && (event->status & DEPEVT_STATUS_SHORT)) + s_pkt = 1; + } + + /* + * We assume here we will always receive the entire data block + * which we should receive. Meaning, if we program RX to + * receive 4K but we receive only 2K, we assume that's all we + * should receive and we simply bounce the request back to the + * gadget driver for further processing. + */ + req->request.actual += req->request.length - count; + dwc3_gadget_giveback(dep, req, status); + if (s_pkt) + break; + if ((event->status & DEPEVT_STATUS_LST) && trb.lst) + break; + if ((event->status & DEPEVT_STATUS_IOC) && trb.ioc) + break; + } while (1); + + if ((event->status & DEPEVT_STATUS_IOC) && trb.ioc) + return 0; + return 1; +} + +static void dwc3_endpoint_transfer_complete(struct dwc3 *dwc, + struct dwc3_ep *dep, const struct dwc3_event_depevt *event, + int start_new) +{ + unsigned status = 0; + int clean_busy; + + if (event->status & DEPEVT_STATUS_BUSERR) + status = -ECONNRESET; + + clean_busy = dwc3_cleanup_done_reqs(dwc, dep, event, status); + if (clean_busy) { + dep->flags &= ~DWC3_EP_BUSY; + dep->res_trans_idx = 0; + } +} + +static void dwc3_gadget_start_isoc(struct dwc3 *dwc, + struct dwc3_ep *dep, const struct dwc3_event_depevt *event) +{ + u32 uf; + + if (list_empty(&dep->request_list)) { + dev_vdbg(dwc->dev, "ISOC ep %s run out for requests.\n", + dep->name); + return; + } + + if (event->parameters) { + u32 mask; + + mask = ~(dep->interval - 1); + uf = event->parameters & mask; + /* 4 micro frames in the future */ + uf += dep->interval * 4; + } else { + uf = 0; + } + + __dwc3_gadget_kick_transfer(dep, uf, 1); +} + +static void dwc3_process_ep_cmd_complete(struct dwc3_ep *dep, + const struct dwc3_event_depevt *event) +{ + struct dwc3 *dwc = dep->dwc; + struct dwc3_event_depevt mod_ev = *event; + + /* + * We were asked to remove one requests. It is possible that this + * request and a few other were started together and have the same + * transfer index. Since we stopped the complete endpoint we don't + * know how many requests were already completed (and not yet) + * reported and how could be done (later). We purge them all until + * the end of the list. + */ + mod_ev.status = DEPEVT_STATUS_LST; + dwc3_cleanup_done_reqs(dwc, dep, &mod_ev, -ESHUTDOWN); + dep->flags &= ~DWC3_EP_BUSY; + /* pending requets are ignored and are queued on XferNotReady */ +} + +static void dwc3_ep_cmd_compl(struct dwc3_ep *dep, + const struct dwc3_event_depevt *event) +{ + u32 param = event->parameters; + u32 cmd_type = (param >> 8) & ((1 << 5) - 1); + + switch (cmd_type) { + case DWC3_DEPCMD_ENDTRANSFER: + dwc3_process_ep_cmd_complete(dep, event); + break; + case DWC3_DEPCMD_STARTTRANSFER: + dep->res_trans_idx = param & 0x7f; + break; + default: + printk(KERN_ERR "%s() unknown /unexpected type: %d\n", + __func__, cmd_type); + break; + }; +} + +static void dwc3_endpoint_interrupt(struct dwc3 *dwc, + const struct dwc3_event_depevt *event) +{ + struct dwc3_ep *dep; + u8 epnum = event->endpoint_number; + + dep = dwc->eps[epnum]; + + dev_vdbg(dwc->dev, "%s: %s\n", dep->name, + dwc3_ep_event_string(event->endpoint_event)); + + if (epnum == 0 || epnum == 1) { + dwc3_ep0_interrupt(dwc, event); + return; + } + + switch (event->endpoint_event) { + case DWC3_DEPEVT_XFERCOMPLETE: + if (usb_endpoint_xfer_isoc(dep->desc)) { + dev_dbg(dwc->dev, "%s is an Isochronous endpoint\n", + dep->name); + return; + } + + dwc3_endpoint_transfer_complete(dwc, dep, event, 1); + break; + case DWC3_DEPEVT_XFERINPROGRESS: + if (!usb_endpoint_xfer_isoc(dep->desc)) { + dev_dbg(dwc->dev, "%s is not an Isochronous endpoint\n", + dep->name); + return; + } + + dwc3_endpoint_transfer_complete(dwc, dep, event, 0); + break; + case DWC3_DEPEVT_XFERNOTREADY: + if (usb_endpoint_xfer_isoc(dep->desc)) { + dwc3_gadget_start_isoc(dwc, dep, event); + } else { + int ret; + + dev_vdbg(dwc->dev, "%s: reason %s\n", + dep->name, event->status + ? "Transfer Active" + : "Transfer Not Active"); + + ret = __dwc3_gadget_kick_transfer(dep, 0, 1); + if (!ret || ret == -EBUSY) + return; + + dev_dbg(dwc->dev, "%s: failed to kick transfers\n", + dep->name); + } + + break; + case DWC3_DEPEVT_STREAMEVT: + if (!usb_endpoint_xfer_bulk(dep->desc)) { + dev_err(dwc->dev, "Stream event for non-Bulk %s\n", + dep->name); + return; + } + + switch (event->status) { + case DEPEVT_STREAMEVT_FOUND: + dev_vdbg(dwc->dev, "Stream %d found and started\n", + event->parameters); + + break; + case DEPEVT_STREAMEVT_NOTFOUND: + /* FALLTHROUGH */ + default: + dev_dbg(dwc->dev, "Couldn't find suitable stream\n"); + } + break; + case DWC3_DEPEVT_RXTXFIFOEVT: + dev_dbg(dwc->dev, "%s FIFO Overrun\n", dep->name); + break; + case DWC3_DEPEVT_EPCMDCMPLT: + dwc3_ep_cmd_compl(dep, event); + break; + } +} + +static void dwc3_disconnect_gadget(struct dwc3 *dwc) +{ + if (dwc->gadget_driver && dwc->gadget_driver->disconnect) { + spin_unlock(&dwc->lock); + dwc->gadget_driver->disconnect(&dwc->gadget); + spin_lock(&dwc->lock); + } +} + +static void dwc3_stop_active_transfer(struct dwc3 *dwc, u32 epnum) +{ + struct dwc3_ep *dep; + struct dwc3_gadget_ep_cmd_params params; + u32 cmd; + int ret; + + dep = dwc->eps[epnum]; + + WARN_ON(!dep->res_trans_idx); + if (dep->res_trans_idx) { + cmd = DWC3_DEPCMD_ENDTRANSFER; + cmd |= DWC3_DEPCMD_HIPRI_FORCERM | DWC3_DEPCMD_CMDIOC; + cmd |= DWC3_DEPCMD_PARAM(dep->res_trans_idx); + memset(¶ms, 0, sizeof(params)); + ret = dwc3_send_gadget_ep_cmd(dwc, dep->number, cmd, ¶ms); + WARN_ON_ONCE(ret); + dep->res_trans_idx = 0; + } +} + +static void dwc3_stop_active_transfers(struct dwc3 *dwc) +{ + u32 epnum; + + for (epnum = 2; epnum < DWC3_ENDPOINTS_NUM; epnum++) { + struct dwc3_ep *dep; + + dep = dwc->eps[epnum]; + if (!(dep->flags & DWC3_EP_ENABLED)) + continue; + + dwc3_remove_requests(dwc, dep); + } +} + +static void dwc3_clear_stall_all_ep(struct dwc3 *dwc) +{ + u32 epnum; + + for (epnum = 1; epnum < DWC3_ENDPOINTS_NUM; epnum++) { + struct dwc3_ep *dep; + struct dwc3_gadget_ep_cmd_params params; + int ret; + + dep = dwc->eps[epnum]; + + if (!(dep->flags & DWC3_EP_STALL)) + continue; + + dep->flags &= ~DWC3_EP_STALL; + + memset(¶ms, 0, sizeof(params)); + ret = dwc3_send_gadget_ep_cmd(dwc, dep->number, + DWC3_DEPCMD_CLEARSTALL, ¶ms); + WARN_ON_ONCE(ret); + } +} + +static void dwc3_gadget_disconnect_interrupt(struct dwc3 *dwc) +{ + dev_vdbg(dwc->dev, "%s\n", __func__); +#if 0 + XXX + U1/U2 is powersave optimization. Skip it for now. Anyway we need to + enable it before we can disable it. + + reg = dwc3_readl(dwc->regs, DWC3_DCTL); + reg &= ~DWC3_DCTL_INITU1ENA; + dwc3_writel(dwc->regs, DWC3_DCTL, reg); + + reg &= ~DWC3_DCTL_INITU2ENA; + dwc3_writel(dwc->regs, DWC3_DCTL, reg); +#endif + + dwc3_stop_active_transfers(dwc); + dwc3_disconnect_gadget(dwc); + dwc->start_config_issued = false; + + dwc->gadget.speed = USB_SPEED_UNKNOWN; +} + +static void dwc3_gadget_usb3_phy_power(struct dwc3 *dwc, int on) +{ + u32 reg; + + reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0)); + + if (on) + reg &= ~DWC3_GUSB3PIPECTL_SUSPHY; + else + reg |= DWC3_GUSB3PIPECTL_SUSPHY; + + dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), reg); +} + +static void dwc3_gadget_usb2_phy_power(struct dwc3 *dwc, int on) +{ + u32 reg; + + reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0)); + + if (on) + reg &= ~DWC3_GUSB2PHYCFG_SUSPHY; + else + reg |= DWC3_GUSB2PHYCFG_SUSPHY; + + dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg); +} + +static void dwc3_gadget_reset_interrupt(struct dwc3 *dwc) +{ + u32 reg; + + dev_vdbg(dwc->dev, "%s\n", __func__); + + /* Enable PHYs */ + dwc3_gadget_usb2_phy_power(dwc, true); + dwc3_gadget_usb3_phy_power(dwc, true); + + if (dwc->gadget.speed != USB_SPEED_UNKNOWN) + dwc3_disconnect_gadget(dwc); + + reg = dwc3_readl(dwc->regs, DWC3_DCTL); + reg &= ~DWC3_DCTL_TSTCTRL_MASK; + dwc3_writel(dwc->regs, DWC3_DCTL, reg); + + dwc3_stop_active_transfers(dwc); + dwc3_clear_stall_all_ep(dwc); + dwc->start_config_issued = false; + + /* Reset device address to zero */ + reg = dwc3_readl(dwc->regs, DWC3_DCFG); + reg &= ~(DWC3_DCFG_DEVADDR_MASK); + dwc3_writel(dwc->regs, DWC3_DCFG, reg); +} + +static void dwc3_update_ram_clk_sel(struct dwc3 *dwc, u32 speed) +{ + u32 reg; + u32 usb30_clock = DWC3_GCTL_CLK_BUS; + + /* + * We change the clock only at SS but I dunno why I would want to do + * this. Maybe it becomes part of the power saving plan. + */ + + if (speed != DWC3_DSTS_SUPERSPEED) + return; + + /* + * RAMClkSel is reset to 0 after USB reset, so it must be reprogrammed + * each time on Connect Done. + */ + if (!usb30_clock) + return; + + reg = dwc3_readl(dwc->regs, DWC3_GCTL); + reg |= DWC3_GCTL_RAMCLKSEL(usb30_clock); + dwc3_writel(dwc->regs, DWC3_GCTL, reg); +} + +static void dwc3_gadget_disable_phy(struct dwc3 *dwc, u8 speed) +{ + switch (speed) { + case USB_SPEED_SUPER: + dwc3_gadget_usb2_phy_power(dwc, false); + break; + case USB_SPEED_HIGH: + case USB_SPEED_FULL: + case USB_SPEED_LOW: + dwc3_gadget_usb3_phy_power(dwc, false); + break; + } +} + +static void dwc3_gadget_conndone_interrupt(struct dwc3 *dwc) +{ + struct dwc3_gadget_ep_cmd_params params; + struct dwc3_ep *dep; + int ret; + u32 reg; + u8 speed; + + dev_vdbg(dwc->dev, "%s\n", __func__); + + memset(¶ms, 0x00, sizeof(params)); + + reg = dwc3_readl(dwc->regs, DWC3_DSTS); + speed = reg & DWC3_DSTS_CONNECTSPD; + dwc->speed = speed; + + dwc3_update_ram_clk_sel(dwc, speed); + + switch (speed) { + case DWC3_DCFG_SUPERSPEED: + dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(512); + dwc->gadget.ep0->maxpacket = 512; + dwc->gadget.speed = USB_SPEED_SUPER; + break; + case DWC3_DCFG_HIGHSPEED: + dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(64); + dwc->gadget.ep0->maxpacket = 64; + dwc->gadget.speed = USB_SPEED_HIGH; + break; + case DWC3_DCFG_FULLSPEED2: + case DWC3_DCFG_FULLSPEED1: + dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(64); + dwc->gadget.ep0->maxpacket = 64; + dwc->gadget.speed = USB_SPEED_FULL; + break; + case DWC3_DCFG_LOWSPEED: + dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(8); + dwc->gadget.ep0->maxpacket = 8; + dwc->gadget.speed = USB_SPEED_LOW; + break; + } + + /* Disable unneded PHY */ + dwc3_gadget_disable_phy(dwc, dwc->gadget.speed); + + dep = dwc->eps[0]; + ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc); + if (ret) { + dev_err(dwc->dev, "failed to enable %s\n", dep->name); + return; + } + + dep = dwc->eps[1]; + ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc); + if (ret) { + dev_err(dwc->dev, "failed to enable %s\n", dep->name); + return; + } + + /* + * Configure PHY via GUSB3PIPECTLn if required. + * + * Update GTXFIFOSIZn + * + * In both cases reset values should be sufficient. + */ +} + +static void dwc3_gadget_wakeup_interrupt(struct dwc3 *dwc) +{ + dev_vdbg(dwc->dev, "%s\n", __func__); + + /* + * TODO take core out of low power mode when that's + * implemented. + */ + + dwc->gadget_driver->resume(&dwc->gadget); +} + +static void dwc3_gadget_linksts_change_interrupt(struct dwc3 *dwc, + unsigned int evtinfo) +{ + /* The fith bit says SuperSpeed yes or no. */ + dwc->link_state = evtinfo & DWC3_LINK_STATE_MASK; + + dev_vdbg(dwc->dev, "%s link %d\n", __func__, dwc->link_state); +} + +static void dwc3_gadget_interrupt(struct dwc3 *dwc, + const struct dwc3_event_devt *event) +{ + switch (event->type) { + case DWC3_DEVICE_EVENT_DISCONNECT: + dwc3_gadget_disconnect_interrupt(dwc); + break; + case DWC3_DEVICE_EVENT_RESET: + dwc3_gadget_reset_interrupt(dwc); + break; + case DWC3_DEVICE_EVENT_CONNECT_DONE: + dwc3_gadget_conndone_interrupt(dwc); + break; + case DWC3_DEVICE_EVENT_WAKEUP: + dwc3_gadget_wakeup_interrupt(dwc); + break; + case DWC3_DEVICE_EVENT_LINK_STATUS_CHANGE: + dwc3_gadget_linksts_change_interrupt(dwc, event->event_info); + break; + case DWC3_DEVICE_EVENT_EOPF: + dev_vdbg(dwc->dev, "End of Periodic Frame\n"); + break; + case DWC3_DEVICE_EVENT_SOF: + dev_vdbg(dwc->dev, "Start of Periodic Frame\n"); + break; + case DWC3_DEVICE_EVENT_ERRATIC_ERROR: + dev_vdbg(dwc->dev, "Erratic Error\n"); + break; + case DWC3_DEVICE_EVENT_CMD_CMPL: + dev_vdbg(dwc->dev, "Command Complete\n"); + break; + case DWC3_DEVICE_EVENT_OVERFLOW: + dev_vdbg(dwc->dev, "Overflow\n"); + break; + default: + dev_dbg(dwc->dev, "UNKNOWN IRQ %d\n", event->type); + } +} + +static void dwc3_process_event_entry(struct dwc3 *dwc, + const union dwc3_event *event) +{ + /* Endpoint IRQ, handle it and return early */ + if (event->type.is_devspec == 0) { + /* depevt */ + return dwc3_endpoint_interrupt(dwc, &event->depevt); + } + + switch (event->type.type) { + case DWC3_EVENT_TYPE_DEV: + dwc3_gadget_interrupt(dwc, &event->devt); + break; + /* REVISIT what to do with Carkit and I2C events ? */ + default: + dev_err(dwc->dev, "UNKNOWN IRQ type %d\n", event->raw); + } +} + +static irqreturn_t dwc3_process_event_buf(struct dwc3 *dwc, u32 buf) +{ + struct dwc3_event_buffer *evt; + int left; + u32 count; + + count = dwc3_readl(dwc->regs, DWC3_GEVNTCOUNT(buf)); + count &= DWC3_GEVNTCOUNT_MASK; + if (!count) + return IRQ_NONE; + + evt = dwc->ev_buffs[buf]; + left = count; + + while (left > 0) { + union dwc3_event event; + + memcpy(&event.raw, (evt->buf + evt->lpos), sizeof(event.raw)); + dwc3_process_event_entry(dwc, &event); + /* + * XXX we wrap around correctly to the next entry as almost all + * entries are 4 bytes in size. There is one entry which has 12 + * bytes which is a regular entry followed by 8 bytes data. ATM + * I don't know how things are organized if were get next to the + * a boundary so I worry about that once we try to handle that. + */ + evt->lpos = (evt->lpos + 4) % DWC3_EVENT_BUFFERS_SIZE; + left -= 4; + + dwc3_writel(dwc->regs, DWC3_GEVNTCOUNT(buf), 4); + } + + return IRQ_HANDLED; +} + +static irqreturn_t dwc3_interrupt(int irq, void *_dwc) +{ + struct dwc3 *dwc = _dwc; + int i; + irqreturn_t ret = IRQ_NONE; + + spin_lock(&dwc->lock); + + for (i = 0; i < DWC3_EVENT_BUFFERS_NUM; i++) { + irqreturn_t status; + + status = dwc3_process_event_buf(dwc, i); + if (status == IRQ_HANDLED) + ret = status; + } + + spin_unlock(&dwc->lock); + + return ret; +} + +/** + * dwc3_gadget_init - Initializes gadget related registers + * @dwc: Pointer to out controller context structure + * + * Returns 0 on success otherwise negative errno. + */ +int __devinit dwc3_gadget_init(struct dwc3 *dwc) +{ + u32 reg; + int ret; + int irq; + + dwc->ctrl_req = dma_alloc_coherent(dwc->dev, sizeof(*dwc->ctrl_req), + &dwc->ctrl_req_addr, GFP_KERNEL); + if (!dwc->ctrl_req) { + dev_err(dwc->dev, "failed to allocate ctrl request\n"); + ret = -ENOMEM; + goto err0; + } + + dwc->ep0_trb = dma_alloc_coherent(dwc->dev, sizeof(*dwc->ep0_trb), + &dwc->ep0_trb_addr, GFP_KERNEL); + if (!dwc->ep0_trb) { + dev_err(dwc->dev, "failed to allocate ep0 trb\n"); + ret = -ENOMEM; + goto err1; + } + + dwc->setup_buf = dma_alloc_coherent(dwc->dev, + sizeof(*dwc->setup_buf) * 2, + &dwc->setup_buf_addr, GFP_KERNEL); + if (!dwc->setup_buf) { + dev_err(dwc->dev, "failed to allocate setup buffer\n"); + ret = -ENOMEM; + goto err2; + } + + dwc->ep0_bounce = dma_alloc_coherent(dwc->dev, + 512, &dwc->ep0_bounce_addr, GFP_KERNEL); + if (!dwc->ep0_bounce) { + dev_err(dwc->dev, "failed to allocate ep0 bounce buffer\n"); + ret = -ENOMEM; + goto err3; + } + + dev_set_name(&dwc->gadget.dev, "gadget"); + + dwc->gadget.ops = &dwc3_gadget_ops; + dwc->gadget.is_dualspeed = true; + dwc->gadget.speed = USB_SPEED_UNKNOWN; + dwc->gadget.dev.parent = dwc->dev; + + dma_set_coherent_mask(&dwc->gadget.dev, dwc->dev->coherent_dma_mask); + + dwc->gadget.dev.dma_parms = dwc->dev->dma_parms; + dwc->gadget.dev.dma_mask = dwc->dev->dma_mask; + dwc->gadget.dev.release = dwc3_gadget_release; + dwc->gadget.name = "dwc3-gadget"; + + /* + * REVISIT: Here we should clear all pending IRQs to be + * sure we're starting from a well known location. + */ + + ret = dwc3_gadget_init_endpoints(dwc); + if (ret) + goto err4; + + irq = platform_get_irq(to_platform_device(dwc->dev), 0); + + ret = request_irq(irq, dwc3_interrupt, IRQF_SHARED, + "dwc3", dwc); + if (ret) { + dev_err(dwc->dev, "failed to request irq #%d --> %d\n", + irq, ret); + goto err5; + } + + /* Enable all but Start and End of Frame IRQs */ + reg = (DWC3_DEVTEN_VNDRDEVTSTRCVEDEN | + DWC3_DEVTEN_EVNTOVERFLOWEN | + DWC3_DEVTEN_CMDCMPLTEN | + DWC3_DEVTEN_ERRTICERREN | + DWC3_DEVTEN_WKUPEVTEN | + DWC3_DEVTEN_ULSTCNGEN | + DWC3_DEVTEN_CONNECTDONEEN | + DWC3_DEVTEN_USBRSTEN | + DWC3_DEVTEN_DISCONNEVTEN); + dwc3_writel(dwc->regs, DWC3_DEVTEN, reg); + + ret = device_register(&dwc->gadget.dev); + if (ret) { + dev_err(dwc->dev, "failed to register gadget device\n"); + put_device(&dwc->gadget.dev); + goto err6; + } + + ret = usb_add_gadget_udc(dwc->dev, &dwc->gadget); + if (ret) { + dev_err(dwc->dev, "failed to register udc\n"); + goto err7; + } + + return 0; + +err7: + device_unregister(&dwc->gadget.dev); + +err6: + dwc3_writel(dwc->regs, DWC3_DEVTEN, 0x00); + free_irq(irq, dwc); + +err5: + dwc3_gadget_free_endpoints(dwc); + +err4: + dma_free_coherent(dwc->dev, 512, dwc->ep0_bounce, + dwc->ep0_bounce_addr); + +err3: + dma_free_coherent(dwc->dev, sizeof(*dwc->setup_buf) * 2, + dwc->setup_buf, dwc->setup_buf_addr); + +err2: + dma_free_coherent(dwc->dev, sizeof(*dwc->ep0_trb), + dwc->ep0_trb, dwc->ep0_trb_addr); + +err1: + dma_free_coherent(dwc->dev, sizeof(*dwc->ctrl_req), + dwc->ctrl_req, dwc->ctrl_req_addr); + +err0: + return ret; +} + +void dwc3_gadget_exit(struct dwc3 *dwc) +{ + int irq; + int i; + + usb_del_gadget_udc(&dwc->gadget); + irq = platform_get_irq(to_platform_device(dwc->dev), 0); + + dwc3_writel(dwc->regs, DWC3_DEVTEN, 0x00); + free_irq(irq, dwc); + + for (i = 0; i < ARRAY_SIZE(dwc->eps); i++) + __dwc3_gadget_ep_disable(dwc->eps[i]); + + dwc3_gadget_free_endpoints(dwc); + + dma_free_coherent(dwc->dev, 512, dwc->ep0_bounce, + dwc->ep0_bounce_addr); + + dma_free_coherent(dwc->dev, sizeof(*dwc->setup_buf) * 2, + dwc->setup_buf, dwc->setup_buf_addr); + + dma_free_coherent(dwc->dev, sizeof(*dwc->ep0_trb), + dwc->ep0_trb, dwc->ep0_trb_addr); + + dma_free_coherent(dwc->dev, sizeof(*dwc->ctrl_req), + dwc->ctrl_req, dwc->ctrl_req_addr); + + device_unregister(&dwc->gadget.dev); +} diff --git a/drivers/usb/dwc3/gadget.h b/drivers/usb/dwc3/gadget.h new file mode 100644 index 000000000000..71145a449d99 --- /dev/null +++ b/drivers/usb/dwc3/gadget.h @@ -0,0 +1,211 @@ +/** + * gadget.h - DesignWare USB3 DRD Gadget Header + * + * Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com + * + * Authors: Felipe Balbi <balbi@ti.com>, + * Sebastian Andrzej Siewior <bigeasy@linutronix.de> + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. The names of the above-listed copyright holders may not be used + * to endorse or promote products derived from this software without + * specific prior written permission. + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2, as published by the Free + * Software Foundation. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS + * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, + * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR + * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR + * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, + * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, + * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR + * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef __DRIVERS_USB_DWC3_GADGET_H +#define __DRIVERS_USB_DWC3_GADGET_H + +#include <linux/list.h> +#include <linux/usb/gadget.h> +#include "io.h" + +struct dwc3; +#define to_dwc3_ep(ep) (container_of(ep, struct dwc3_ep, endpoint)) +#define gadget_to_dwc(g) (container_of(g, struct dwc3, gadget)) + +/* DEPCFG parameter 1 */ +#define DWC3_DEPCFG_INT_NUM(n) ((n) << 0) +#define DWC3_DEPCFG_XFER_COMPLETE_EN (1 << 8) +#define DWC3_DEPCFG_XFER_IN_PROGRESS_EN (1 << 9) +#define DWC3_DEPCFG_XFER_NOT_READY_EN (1 << 10) +#define DWC3_DEPCFG_FIFO_ERROR_EN (1 << 11) +#define DWC3_DEPCFG_STREAM_EVENT_EN (1 << 13) +#define DWC3_DEPCFG_BINTERVAL_M1(n) ((n) << 16) +#define DWC3_DEPCFG_STREAM_CAPABLE (1 << 24) +#define DWC3_DEPCFG_EP_NUMBER(n) ((n) << 25) +#define DWC3_DEPCFG_BULK_BASED (1 << 30) +#define DWC3_DEPCFG_FIFO_BASED (1 << 31) + +/* DEPCFG parameter 0 */ +#define DWC3_DEPCFG_EP_TYPE(n) ((n) << 1) +#define DWC3_DEPCFG_MAX_PACKET_SIZE(n) ((n) << 3) +#define DWC3_DEPCFG_FIFO_NUMBER(n) ((n) << 17) +#define DWC3_DEPCFG_BURST_SIZE(n) ((n) << 22) +#define DWC3_DEPCFG_DATA_SEQ_NUM(n) ((n) << 26) +#define DWC3_DEPCFG_IGN_SEQ_NUM (1 << 31) + +/* DEPXFERCFG parameter 0 */ +#define DWC3_DEPXFERCFG_NUM_XFER_RES(n) ((n) & 0xffff) + +struct dwc3_gadget_ep_cmd_params { + u32 param2; + u32 param1; + u32 param0; +}; + +/* -------------------------------------------------------------------------- */ + +struct dwc3_request { + struct usb_request request; + struct list_head list; + struct dwc3_ep *dep; + + u8 epnum; + struct dwc3_trb_hw *trb; + dma_addr_t trb_dma; + + unsigned direction:1; + unsigned mapped:1; + unsigned queued:1; +}; +#define to_dwc3_request(r) (container_of(r, struct dwc3_request, request)) + +static inline struct dwc3_request *next_request(struct list_head *list) +{ + if (list_empty(list)) + return NULL; + + return list_first_entry(list, struct dwc3_request, list); +} + +static inline void dwc3_gadget_move_request_queued(struct dwc3_request *req) +{ + struct dwc3_ep *dep = req->dep; + + req->queued = true; + list_move_tail(&req->list, &dep->req_queued); +} + +#if defined(CONFIG_USB_GADGET_DWC3) || defined(CONFIG_USB_GADGET_DWC3_MODULE) +int dwc3_gadget_init(struct dwc3 *dwc); +void dwc3_gadget_exit(struct dwc3 *dwc); +#else +static inline int dwc3_gadget_init(struct dwc3 *dwc) { return 0; } +static inline void dwc3_gadget_exit(struct dwc3 *dwc) { } +static inline int dwc3_send_gadget_ep_cmd(struct dwc3 *dwc, unsigned ep, + unsigned cmd, struct dwc3_gadget_ep_cmd_params *params) +{ + return 0; +} +#endif + +void dwc3_gadget_giveback(struct dwc3_ep *dep, struct dwc3_request *req, + int status); + +void dwc3_ep0_interrupt(struct dwc3 *dwc, const struct dwc3_event_depevt *event); +void dwc3_ep0_out_start(struct dwc3 *dwc); +int dwc3_gadget_ep0_queue(struct usb_ep *ep, struct usb_request *request, + gfp_t gfp_flags); +int __dwc3_gadget_ep_set_halt(struct dwc3_ep *dep, int value); +int dwc3_send_gadget_ep_cmd(struct dwc3 *dwc, unsigned ep, + unsigned cmd, struct dwc3_gadget_ep_cmd_params *params); +void dwc3_map_buffer_to_dma(struct dwc3_request *req); +void dwc3_unmap_buffer_from_dma(struct dwc3_request *req); + +/** + * dwc3_gadget_ep_get_transfer_index - Gets transfer index from HW + * @dwc: DesignWare USB3 Pointer + * @number: DWC endpoint number + * + * Caller should take care of locking + */ +static inline u32 dwc3_gadget_ep_get_transfer_index(struct dwc3 *dwc, u8 number) +{ + u32 res_id; + + res_id = dwc3_readl(dwc->regs, DWC3_DEPCMD(number)); + + return DWC3_DEPCMD_GET_RSC_IDX(res_id); +} + +/** + * dwc3_gadget_event_string - returns event name + * @event: the event code + */ +static inline const char *dwc3_gadget_event_string(u8 event) +{ + switch (event) { + case DWC3_DEVICE_EVENT_DISCONNECT: + return "Disconnect"; + case DWC3_DEVICE_EVENT_RESET: + return "Reset"; + case DWC3_DEVICE_EVENT_CONNECT_DONE: + return "Connection Done"; + case DWC3_DEVICE_EVENT_LINK_STATUS_CHANGE: + return "Link Status Change"; + case DWC3_DEVICE_EVENT_WAKEUP: + return "WakeUp"; + case DWC3_DEVICE_EVENT_EOPF: + return "End-Of-Frame"; + case DWC3_DEVICE_EVENT_SOF: + return "Start-Of-Frame"; + case DWC3_DEVICE_EVENT_ERRATIC_ERROR: + return "Erratic Error"; + case DWC3_DEVICE_EVENT_CMD_CMPL: + return "Command Complete"; + case DWC3_DEVICE_EVENT_OVERFLOW: + return "Overflow"; + } + + return "UNKNOWN"; +} + +/** + * dwc3_ep_event_string - returns event name + * @event: then event code + */ +static inline const char *dwc3_ep_event_string(u8 event) +{ + switch (event) { + case DWC3_DEPEVT_XFERCOMPLETE: + return "Transfer Complete"; + case DWC3_DEPEVT_XFERINPROGRESS: + return "Transfer In-Progress"; + case DWC3_DEPEVT_XFERNOTREADY: + return "Transfer Not Ready"; + case DWC3_DEPEVT_RXTXFIFOEVT: + return "FIFO"; + case DWC3_DEPEVT_STREAMEVT: + return "Stream"; + case DWC3_DEPEVT_EPCMDCMPLT: + return "Endpoint Command Complete"; + } + + return "UNKNOWN"; +} + +#endif /* __DRIVERS_USB_DWC3_GADGET_H */ diff --git a/drivers/usb/dwc3/io.h b/drivers/usb/dwc3/io.h new file mode 100644 index 000000000000..bc957db1ea4b --- /dev/null +++ b/drivers/usb/dwc3/io.h @@ -0,0 +1,54 @@ +/** + * io.h - DesignWare USB3 DRD IO Header + * + * Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com + * + * Authors: Felipe Balbi <balbi@ti.com>, + * Sebastian Andrzej Siewior <bigeasy@linutronix.de> + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. The names of the above-listed copyright holders may not be used + * to endorse or promote products derived from this software without + * specific prior written permission. + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2, as published by the Free + * Software Foundation. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS + * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, + * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR + * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR + * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, + * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, + * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR + * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef __DRIVERS_USB_DWC3_IO_H +#define __DRIVERS_USB_DWC3_IO_H + +#include <asm/io.h> + +static inline u32 dwc3_readl(void __iomem *base, u32 offset) +{ + return readl(base + offset); +} + +static inline void dwc3_writel(void __iomem *base, u32 offset, u32 value) +{ + writel(value, base + offset); +} + +#endif /* __DRIVERS_USB_DWC3_IO_H */ diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig index 5a084b9cfa3c..b21cd376c11a 100644 --- a/drivers/usb/gadget/Kconfig +++ b/drivers/usb/gadget/Kconfig @@ -96,6 +96,22 @@ config USB_GADGET_VBUS_DRAW This value will be used except for system-specific gadget drivers that have more specific information. +config USB_GADGET_STORAGE_NUM_BUFFERS + int "Number of storage pipeline buffers" + range 2 4 + default 2 + help + Usually 2 buffers are enough to establish a good buffering + pipeline. The number may be increased in order to compensate + for a bursty VFS behaviour. For instance there may be CPU wake up + latencies that makes the VFS to appear bursty in a system with + an CPU on-demand governor. Especially if DMA is doing IO to + offload the CPU. In this case the CPU will go into power + save often and spin up occasionally to move data within VFS. + If selecting USB_GADGET_DEBUG_FILES this value may be set by + a module parameter as well. + If unsure, say 2. + # # USB Peripheral Controller Support # @@ -255,12 +271,11 @@ config USB_S3C_HSOTG integrated into the S3C64XX series SoC. config USB_IMX - tristate "Freescale IMX USB Peripheral Controller" - depends on ARCH_MX1 + tristate "Freescale i.MX1 USB Peripheral Controller" + depends on ARCH_MXC help - Freescale's IMX series include an integrated full speed - USB 1.1 device controller. The controller in the IMX series - is register-compatible. + Freescale's i.MX1 includes an integrated full speed + USB 1.1 device controller. It has Six fixed-function endpoints, as well as endpoint zero (for control transfers). @@ -303,6 +318,18 @@ config USB_PXA_U2O PXA9xx Processor series include a high speed USB2.0 device controller, which support high speed and full speed USB peripheral. +config USB_GADGET_DWC3 + tristate "DesignWare USB3.0 (DRD) Controller" + depends on USB_DWC3 + select USB_GADGET_DUALSPEED + select USB_GADGET_SUPERSPEED + help + DesignWare USB3.0 controller is a SuperSpeed USB3.0 Controller + which can be configured for peripheral-only, host-only, hub-only + and Dual-Role operation. This Controller was first integrated into + the OMAP5 series of processors. More information about the OMAP5 + version of this controller, refer to http://www.ti.com/omap5. + # # Controllers available in both integrated and discrete versions # @@ -846,6 +873,16 @@ config USB_G_NOKIA It's only really useful for N900 hardware. If you're building a kernel for N900, say Y or M here. If unsure, say N. +config USB_G_ACM_MS + tristate "CDC Composite Device (ACM and mass storage)" + depends on BLOCK + help + This driver provides two functions in one configuration: + a mass storage, and a CDC ACM (serial port) link. + + Say "y" to link the driver statically, or "m" to build a + dynamically linked module called "g_acm_ms". + config USB_G_MULTI tristate "Multifunction Composite Gadget (EXPERIMENTAL)" depends on BLOCK && NET diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile index 9ba725af4a08..b54ac6190890 100644 --- a/drivers/usb/gadget/Makefile +++ b/drivers/usb/gadget/Makefile @@ -28,7 +28,7 @@ obj-$(CONFIG_USB_S3C_HSUDC) += s3c-hsudc.o obj-$(CONFIG_USB_LANGWELL) += langwell_udc.o obj-$(CONFIG_USB_EG20T) += pch_udc.o obj-$(CONFIG_USB_PXA_U2O) += mv_udc.o -mv_udc-y := mv_udc_core.o mv_udc_phy.o +mv_udc-y := mv_udc_core.o obj-$(CONFIG_USB_CI13XXX_MSM) += ci13xxx_msm.o obj-$(CONFIG_USB_FUSB300) += fusb300_udc.o @@ -51,6 +51,7 @@ g_dbgp-y := dbgp.o g_nokia-y := nokia.o g_webcam-y := webcam.o g_ncm-y := ncm.o +g_acm_ms-y := acm_ms.o obj-$(CONFIG_USB_ZERO) += g_zero.o obj-$(CONFIG_USB_AUDIO) += g_audio.o @@ -69,3 +70,4 @@ obj-$(CONFIG_USB_G_MULTI) += g_multi.o obj-$(CONFIG_USB_G_NOKIA) += g_nokia.o obj-$(CONFIG_USB_G_WEBCAM) += g_webcam.o obj-$(CONFIG_USB_G_NCM) += g_ncm.o +obj-$(CONFIG_USB_G_ACM_MS) += g_acm_ms.o diff --git a/drivers/usb/gadget/acm_ms.c b/drivers/usb/gadget/acm_ms.c new file mode 100644 index 000000000000..fdb7aec3bd0c --- /dev/null +++ b/drivers/usb/gadget/acm_ms.c @@ -0,0 +1,256 @@ +/* + * acm_ms.c -- Composite driver, with ACM and mass storage support + * + * Copyright (C) 2008 David Brownell + * Copyright (C) 2008 Nokia Corporation + * Author: David Brownell + * Modified: Klaus Schwarzkopf <schwarzkopf@sensortherm.de> + * + * Heavily based on multi.c and cdc2.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/utsname.h> + +#include "u_serial.h" + +#define DRIVER_DESC "Composite Gadget (ACM + MS)" +#define DRIVER_VERSION "2011/10/10" + +/*-------------------------------------------------------------------------*/ + +/* + * DO NOT REUSE THESE IDs with a protocol-incompatible driver!! Ever!! + * Instead: allocate your own, using normal USB-IF procedures. + */ +#define ACM_MS_VENDOR_NUM 0x1d6b /* Linux Foundation */ +#define ACM_MS_PRODUCT_NUM 0x0106 /* Composite Gadget: ACM + MS*/ + +/*-------------------------------------------------------------------------*/ + +/* + * Kbuild is not very cooperative with respect to linking separately + * compiled library objects into one module. So for now we won't use + * separate compilation ... ensuring init/exit sections work to shrink + * the runtime footprint, and giving us at least some parts of what + * a "gcc --combine ... part1.c part2.c part3.c ... " build would. + */ + +#include "composite.c" +#include "usbstring.c" +#include "config.c" +#include "epautoconf.c" +#include "u_serial.c" +#include "f_acm.c" +#include "f_mass_storage.c" + +/*-------------------------------------------------------------------------*/ + +static struct usb_device_descriptor device_desc = { + .bLength = sizeof device_desc, + .bDescriptorType = USB_DT_DEVICE, + + .bcdUSB = cpu_to_le16(0x0200), + + .bDeviceClass = USB_CLASS_MISC /* 0xEF */, + .bDeviceSubClass = 2, + .bDeviceProtocol = 1, + + /* .bMaxPacketSize0 = f(hardware) */ + + /* Vendor and product id can be overridden by module parameters. */ + .idVendor = cpu_to_le16(ACM_MS_VENDOR_NUM), + .idProduct = cpu_to_le16(ACM_MS_PRODUCT_NUM), + /* .bcdDevice = f(hardware) */ + /* .iManufacturer = DYNAMIC */ + /* .iProduct = DYNAMIC */ + /* NO SERIAL NUMBER */ + /*.bNumConfigurations = DYNAMIC*/ +}; + +static struct usb_otg_descriptor otg_descriptor = { + .bLength = sizeof otg_descriptor, + .bDescriptorType = USB_DT_OTG, + + /* + * REVISIT SRP-only hardware is possible, although + * it would not be called "OTG" ... + */ + .bmAttributes = USB_OTG_SRP | USB_OTG_HNP, +}; + +static const struct usb_descriptor_header *otg_desc[] = { + (struct usb_descriptor_header *) &otg_descriptor, + NULL, +}; + + +/* string IDs are assigned dynamically */ + +#define STRING_MANUFACTURER_IDX 0 +#define STRING_PRODUCT_IDX 1 + +static char manufacturer[50]; + +static struct usb_string strings_dev[] = { + [STRING_MANUFACTURER_IDX].s = manufacturer, + [STRING_PRODUCT_IDX].s = DRIVER_DESC, + { } /* end of list */ +}; + +static struct usb_gadget_strings stringtab_dev = { + .language = 0x0409, /* en-us */ + .strings = strings_dev, +}; + +static struct usb_gadget_strings *dev_strings[] = { + &stringtab_dev, + NULL, +}; + +/****************************** Configurations ******************************/ + +static struct fsg_module_parameters fsg_mod_data = { .stall = 1 }; +FSG_MODULE_PARAMETERS(/* no prefix */, fsg_mod_data); + +static struct fsg_common fsg_common; + +/*-------------------------------------------------------------------------*/ + +/* + * We _always_ have both ACM and mass storage functions. + */ +static int __init acm_ms_do_config(struct usb_configuration *c) +{ + int status; + + if (gadget_is_otg(c->cdev->gadget)) { + c->descriptors = otg_desc; + c->bmAttributes |= USB_CONFIG_ATT_WAKEUP; + } + + + status = acm_bind_config(c, 0); + if (status < 0) + return status; + + status = fsg_bind_config(c->cdev, c, &fsg_common); + if (status < 0) + return status; + + return 0; +} + +static struct usb_configuration acm_ms_config_driver = { + .label = DRIVER_DESC, + .bConfigurationValue = 1, + /* .iConfiguration = DYNAMIC */ + .bmAttributes = USB_CONFIG_ATT_SELFPOWER, +}; + +/*-------------------------------------------------------------------------*/ + +static int __init acm_ms_bind(struct usb_composite_dev *cdev) +{ + int gcnum; + struct usb_gadget *gadget = cdev->gadget; + int status; + void *retp; + + /* set up serial link layer */ + status = gserial_setup(cdev->gadget, 1); + if (status < 0) + return status; + + /* set up mass storage function */ + retp = fsg_common_from_params(&fsg_common, cdev, &fsg_mod_data); + if (IS_ERR(retp)) { + status = PTR_ERR(retp); + goto fail0; + } + + /* set bcdDevice */ + gcnum = usb_gadget_controller_number(gadget); + if (gcnum >= 0) { + device_desc.bcdDevice = cpu_to_le16(0x0300 | gcnum); + } else { + WARNING(cdev, "controller '%s' not recognized; trying %s\n", + gadget->name, + acm_ms_config_driver.label); + device_desc.bcdDevice = + cpu_to_le16(0x0300 | 0x0099); + } + + /* + * Allocate string descriptor numbers ... note that string + * contents can be overridden by the composite_dev glue. + */ + + /* device descriptor strings: manufacturer, product */ + snprintf(manufacturer, sizeof manufacturer, "%s %s with %s", + init_utsname()->sysname, init_utsname()->release, + gadget->name); + status = usb_string_id(cdev); + if (status < 0) + goto fail1; + strings_dev[STRING_MANUFACTURER_IDX].id = status; + device_desc.iManufacturer = status; + + status = usb_string_id(cdev); + if (status < 0) + goto fail1; + strings_dev[STRING_PRODUCT_IDX].id = status; + device_desc.iProduct = status; + + /* register our configuration */ + status = usb_add_config(cdev, &acm_ms_config_driver, acm_ms_do_config); + if (status < 0) + goto fail1; + + dev_info(&gadget->dev, "%s, version: " DRIVER_VERSION "\n", + DRIVER_DESC); + fsg_common_put(&fsg_common); + return 0; + + /* error recovery */ +fail1: + fsg_common_put(&fsg_common); +fail0: + gserial_cleanup(); + return status; +} + +static int __exit acm_ms_unbind(struct usb_composite_dev *cdev) +{ + gserial_cleanup(); + + return 0; +} + +static struct usb_composite_driver acm_ms_driver = { + .name = "g_acm_ms", + .dev = &device_desc, + .strings = dev_strings, + .unbind = __exit_p(acm_ms_unbind), +}; + +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_AUTHOR("Klaus Schwarzkopf <schwarzkopf@sensortherm.de>"); +MODULE_LICENSE("GPL v2"); + +static int __init init(void) +{ + return usb_composite_probe(&acm_ms_driver, acm_ms_bind); +} +module_init(init); + +static void __exit cleanup(void) +{ + usb_composite_unregister(&acm_ms_driver); +} +module_exit(cleanup); diff --git a/drivers/usb/gadget/amd5536udc.c b/drivers/usb/gadget/amd5536udc.c index 70f2b376c86d..4730016d7cd4 100644 --- a/drivers/usb/gadget/amd5536udc.c +++ b/drivers/usb/gadget/amd5536udc.c @@ -8,15 +8,6 @@ * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ /* @@ -354,7 +345,7 @@ udc_ep_enable(struct usb_ep *usbep, const struct usb_endpoint_descriptor *desc) writel(tmp, &dev->ep[ep->num].regs->ctl); /* set max packet size */ - maxpacket = le16_to_cpu(desc->wMaxPacketSize); + maxpacket = usb_endpoint_maxp(desc); tmp = readl(&dev->ep[ep->num].regs->bufout_maxpkt); tmp = AMD_ADDBITS(tmp, maxpacket, UDC_EP_MAX_PKT_SIZE); ep->ep.maxpacket = maxpacket; @@ -3014,13 +3005,8 @@ __acquires(dev->lock) /* link up all endpoints */ udc_setup_endpoints(dev); - if (dev->gadget.speed == USB_SPEED_HIGH) { - dev_info(&dev->pdev->dev, "Connect: speed = %s\n", - "high"); - } else if (dev->gadget.speed == USB_SPEED_FULL) { - dev_info(&dev->pdev->dev, "Connect: speed = %s\n", - "full"); - } + dev_info(&dev->pdev->dev, "Connect: %s\n", + usb_speed_string(dev->gadget.speed)); /* init ep 0 */ activate_control_endpoints(dev); diff --git a/drivers/usb/gadget/amd5536udc.h b/drivers/usb/gadget/amd5536udc.h index 1d1c7543468e..f87e29c65325 100644 --- a/drivers/usb/gadget/amd5536udc.h +++ b/drivers/usb/gadget/amd5536udc.h @@ -8,15 +8,6 @@ * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #ifndef AMD5536UDC_H diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c index ddb118a76807..8efe0fa9228d 100644 --- a/drivers/usb/gadget/at91_udc.c +++ b/drivers/usb/gadget/at91_udc.c @@ -9,16 +9,6 @@ * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the - * Free Software Foundation, Inc., 59 Temple Place - Suite 330, - * Boston, MA 02111-1307, USA. */ #undef VERBOSE_DEBUG @@ -460,7 +450,7 @@ static void nuke(struct at91_ep *ep, int status) { struct at91_request *req; - // terminer chaque requete dans la queue + /* terminate any request in the queue */ ep->stopped = 1; if (list_empty(&ep->queue)) return; @@ -487,7 +477,7 @@ static int at91_ep_enable(struct usb_ep *_ep, || !desc || ep->desc || _ep->name == ep0name || desc->bDescriptorType != USB_DT_ENDPOINT - || (maxpacket = le16_to_cpu(desc->wMaxPacketSize)) == 0 + || (maxpacket = usb_endpoint_maxp(desc)) == 0 || maxpacket > ep->maxpacket) { DBG("bad ep or descriptor\n"); return -EINVAL; @@ -788,7 +778,7 @@ static const struct usb_ep_ops at91_ep_ops = { .queue = at91_ep_queue, .dequeue = at91_ep_dequeue, .set_halt = at91_ep_set_halt, - // there's only imprecise fifo status reporting + /* there's only imprecise fifo status reporting */ }; /*-------------------------------------------------------------------------*/ @@ -846,7 +836,7 @@ static void udc_reinit(struct at91_udc *udc) ep->fifo_bank = 0; ep->ep.maxpacket = ep->maxpacket; ep->creg = (void __iomem *) udc->udp_baseaddr + AT91_UDP_CSR(i); - // initialiser une queue par endpoint + /* initialize one queue per endpoint */ INIT_LIST_HEAD(&ep->queue); } } @@ -952,7 +942,7 @@ static int at91_vbus_session(struct usb_gadget *gadget, int is_active) struct at91_udc *udc = to_udc(gadget); unsigned long flags; - // VDBG("vbus %s\n", is_active ? "on" : "off"); + /* VDBG("vbus %s\n", is_active ? "on" : "off"); */ spin_lock_irqsave(&udc->lock, flags); udc->vbus = (is_active != 0); if (udc->driver) @@ -1003,7 +993,7 @@ static const struct usb_gadget_ops at91_udc_ops = { * VBUS-powered devices may also also want to support bigger * power budgets after an appropriate SET_CONFIGURATION. */ - // .vbus_power = at91_vbus_power, + /* .vbus_power = at91_vbus_power, */ }; /*-------------------------------------------------------------------------*/ @@ -1072,7 +1062,7 @@ static void handle_setup(struct at91_udc *udc, struct at91_ep *ep, u32 csr) ep->is_in = 0; } } else { - // REVISIT this happens sometimes under load; why?? + /* REVISIT this happens sometimes under load; why?? */ ERR("SETUP len %d, csr %08x\n", rxcount, csr); status = -EINVAL; } @@ -1451,7 +1441,7 @@ static irqreturn_t at91_udc_irq (int irq, void *_udc) at91_udp_write(udc, AT91_UDP_IDR, AT91_UDP_RXSUSP); at91_udp_write(udc, AT91_UDP_IER, AT91_UDP_RXRSM); at91_udp_write(udc, AT91_UDP_ICR, AT91_UDP_RXSUSP); - // VDBG("bus suspend\n"); + /* VDBG("bus suspend\n"); */ if (udc->suspended) continue; udc->suspended = 1; @@ -1473,7 +1463,7 @@ static irqreturn_t at91_udc_irq (int irq, void *_udc) at91_udp_write(udc, AT91_UDP_IDR, AT91_UDP_RXRSM); at91_udp_write(udc, AT91_UDP_IER, AT91_UDP_RXSUSP); at91_udp_write(udc, AT91_UDP_ICR, AT91_UDP_RXRSM); - // VDBG("bus resume\n"); + /* VDBG("bus resume\n"); */ if (!udc->suspended) continue; udc->suspended = 0; @@ -1820,7 +1810,7 @@ static int __init at91udc_probe(struct platform_device *pdev) /* request UDC and maybe VBUS irqs */ udc->udp_irq = platform_get_irq(pdev, 0); retval = request_irq(udc->udp_irq, at91_udc_irq, - IRQF_DISABLED, driver_name, udc); + 0, driver_name, udc); if (retval < 0) { DBG("request irq %d failed\n", udc->udp_irq); goto fail1; @@ -1848,7 +1838,7 @@ static int __init at91udc_probe(struct platform_device *pdev) jiffies + VBUS_POLL_TIMEOUT); } else { if (request_irq(udc->board.vbus_pin, at91_vbus_irq, - IRQF_DISABLED, driver_name, udc)) { + 0, driver_name, udc)) { DBG("request vbus irq %d failed\n", udc->board.vbus_pin); retval = -EBUSY; diff --git a/drivers/usb/gadget/at91_udc.h b/drivers/usb/gadget/at91_udc.h index 108ca54f9092..3c0315b86ace 100644 --- a/drivers/usb/gadget/at91_udc.h +++ b/drivers/usb/gadget/at91_udc.h @@ -7,16 +7,6 @@ * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the - * Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ #ifndef AT91_UDC_H diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c index 5b1665eb1bef..271a9d873608 100644 --- a/drivers/usb/gadget/atmel_usba_udc.c +++ b/drivers/usb/gadget/atmel_usba_udc.c @@ -527,7 +527,7 @@ usba_ep_enable(struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc) DBG(DBG_GADGET, "%s: ep_enable: desc=%p\n", ep->ep.name, desc); - maxpacket = le16_to_cpu(desc->wMaxPacketSize) & 0x7ff; + maxpacket = usb_endpoint_maxp(desc) & 0x7ff; if (((desc->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK) != ep->index) || ep->index == 0 @@ -571,7 +571,7 @@ usba_ep_enable(struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc) * Bits 11:12 specify number of _additional_ * transactions per microframe. */ - nr_trans = ((le16_to_cpu(desc->wMaxPacketSize) >> 11) & 3) + 1; + nr_trans = ((usb_endpoint_maxp(desc) >> 11) & 3) + 1; if (nr_trans > 3) return -EINVAL; @@ -1718,13 +1718,12 @@ static irqreturn_t usba_udc_irq(int irq, void *devid) spin_lock(&udc->lock); } - if (status & USBA_HIGH_SPEED) { - DBG(DBG_BUS, "High-speed bus reset detected\n"); + if (status & USBA_HIGH_SPEED) udc->gadget.speed = USB_SPEED_HIGH; - } else { - DBG(DBG_BUS, "Full-speed bus reset detected\n"); + else udc->gadget.speed = USB_SPEED_FULL; - } + DBG(DBG_BUS, "%s bus reset detected\n", + usb_speed_string(udc->gadget.speed)); ep0 = &usba_ep[0]; ep0->desc = &usba_ep0_desc; diff --git a/drivers/usb/gadget/cdc2.c b/drivers/usb/gadget/cdc2.c index b1c1afbb8750..672674c2fb3d 100644 --- a/drivers/usb/gadget/cdc2.c +++ b/drivers/usb/gadget/cdc2.c @@ -8,15 +8,6 @@ * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include <linux/kernel.h> diff --git a/drivers/usb/gadget/ci13xxx_msm.c b/drivers/usb/gadget/ci13xxx_msm.c index 470981ad6f77..4eedfe557154 100644 --- a/drivers/usb/gadget/ci13xxx_msm.c +++ b/drivers/usb/gadget/ci13xxx_msm.c @@ -3,17 +3,6 @@ * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and * only version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA - * 02110-1301, USA. - * */ #include <linux/module.h> diff --git a/drivers/usb/gadget/ci13xxx_udc.c b/drivers/usb/gadget/ci13xxx_udc.c index 1265a8502ea0..83428f56253b 100644 --- a/drivers/usb/gadget/ci13xxx_udc.c +++ b/drivers/usb/gadget/ci13xxx_udc.c @@ -2101,7 +2101,7 @@ static int ep_enable(struct usb_ep *ep, mEp->num = usb_endpoint_num(desc); mEp->type = usb_endpoint_type(desc); - mEp->ep.maxpacket = __constant_le16_to_cpu(desc->wMaxPacketSize); + mEp->ep.maxpacket = usb_endpoint_maxp(desc); dbg_event(_usb_addr(mEp), "ENABLE", 0); diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c index aef47414f5d5..8a5529d214fb 100644 --- a/drivers/usb/gadget/composite.c +++ b/drivers/usb/gadget/composite.c @@ -7,15 +7,6 @@ * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ /* #define VERBOSE_DEBUG */ @@ -164,7 +155,7 @@ int config_ep_by_speed(struct usb_gadget *g, ep_found: /* commit results */ - _ep->maxpacket = le16_to_cpu(chosen_desc->wMaxPacketSize); + _ep->maxpacket = usb_endpoint_maxp(chosen_desc); _ep->desc = chosen_desc; _ep->comp_desc = NULL; _ep->maxburst = 0; @@ -551,9 +542,9 @@ static int bos_desc(struct usb_composite_dev *cdev) if (cdev->gadget->ops->get_config_params) cdev->gadget->ops->get_config_params(&dcd_config_params); else { - dcd_config_params.bU1devExitLat = USB_DEFULT_U1_DEV_EXIT_LAT; + dcd_config_params.bU1devExitLat = USB_DEFAULT_U1_DEV_EXIT_LAT; dcd_config_params.bU2DevExitLat = - cpu_to_le16(USB_DEFULT_U2_DEV_EXIT_LAT); + cpu_to_le16(USB_DEFAULT_U2_DEV_EXIT_LAT); } ss_cap->bU1devExitLat = dcd_config_params.bU1devExitLat; ss_cap->bU2DevExitLat = dcd_config_params.bU2DevExitLat; @@ -626,25 +617,9 @@ static int set_config(struct usb_composite_dev *cdev, result = 0; } - INFO(cdev, "%s speed config #%d: %s\n", - ({ char *speed; - switch (gadget->speed) { - case USB_SPEED_LOW: - speed = "low"; - break; - case USB_SPEED_FULL: - speed = "full"; - break; - case USB_SPEED_HIGH: - speed = "high"; - break; - case USB_SPEED_SUPER: - speed = "super"; - break; - default: - speed = "?"; - break; - } ; speed; }), number, c ? c->label : "unconfigured"); + INFO(cdev, "%s config #%d: %s\n", + usb_speed_string(gadget->speed), + number, c ? c->label : "unconfigured"); if (!c) goto done; diff --git a/drivers/usb/gadget/config.c b/drivers/usb/gadget/config.c index b2c001334876..7542a72ce51a 100644 --- a/drivers/usb/gadget/config.c +++ b/drivers/usb/gadget/config.c @@ -7,15 +7,6 @@ * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include <linux/errno.h> diff --git a/drivers/usb/gadget/dbgp.c b/drivers/usb/gadget/dbgp.c index 8beefdd36787..f855ecf7a637 100644 --- a/drivers/usb/gadget/dbgp.c +++ b/drivers/usb/gadget/dbgp.c @@ -4,7 +4,6 @@ * Copyright (C) 2010 Stephane Duverger * * Released under the GPLv2. - * */ /* verbose messages */ diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c index e755a9d267fc..ab8f1b488d54 100644 --- a/drivers/usb/gadget/dummy_hcd.c +++ b/drivers/usb/gadget/dummy_hcd.c @@ -10,15 +10,6 @@ * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ @@ -439,7 +430,7 @@ dummy_enable (struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc) * maximum packet size. * For SS devices the wMaxPacketSize is limited by 1024. */ - max = le16_to_cpu(desc->wMaxPacketSize) & 0x7ff; + max = usb_endpoint_maxp(desc) & 0x7ff; /* drivers must not request bad settings, since lower levels * (hardware or its drivers) may not check. some endpoints @@ -1277,7 +1268,7 @@ static int periodic_bytes (struct dummy *dum, struct dummy_ep *ep) int tmp; /* high bandwidth mode */ - tmp = le16_to_cpu(ep->desc->wMaxPacketSize); + tmp = usb_endpoint_maxp(ep->desc); tmp = (tmp >> 11) & 0x03; tmp *= 8 /* applies to entire frame */; limit += limit * tmp; diff --git a/drivers/usb/gadget/epautoconf.c b/drivers/usb/gadget/epautoconf.c index 7a7e6b7e1fd6..596a0b464e61 100644 --- a/drivers/usb/gadget/epautoconf.c +++ b/drivers/usb/gadget/epautoconf.c @@ -7,16 +7,6 @@ * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * */ #include <linux/kernel.h> @@ -158,7 +148,7 @@ ep_matches ( * where it's an output parameter representing the full speed limit. * the usb spec fixes high speed bulk maxpacket at 512 bytes. */ - max = 0x7ff & le16_to_cpu(desc->wMaxPacketSize); + max = 0x7ff & usb_endpoint_maxp(desc); switch (type) { case USB_ENDPOINT_XFER_INT: /* INT: limit 64 bytes full speed, 1024 high/super speed */ diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c index aafc84f33e26..0cd764d59351 100644 --- a/drivers/usb/gadget/ether.c +++ b/drivers/usb/gadget/ether.c @@ -9,15 +9,6 @@ * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ /* #define VERBOSE_DEBUG */ diff --git a/drivers/usb/gadget/f_audio.c b/drivers/usb/gadget/f_audio.c index a9a4eade7e80..ec7ffcd0d0cd 100644 --- a/drivers/usb/gadget/f_audio.c +++ b/drivers/usb/gadget/f_audio.c @@ -460,7 +460,7 @@ static int audio_set_endpoint_req(struct usb_function *f, switch (ctrl->bRequest) { case UAC_SET_CUR: - value = 0; + value = len; break; case UAC_SET_MIN: @@ -499,7 +499,7 @@ static int audio_get_endpoint_req(struct usb_function *f, case UAC_GET_MIN: case UAC_GET_MAX: case UAC_GET_RES: - value = 3; + value = len; break; case UAC_GET_MEM: break; @@ -681,17 +681,18 @@ f_audio_bind(struct usb_configuration *c, struct usb_function *f) status = -ENOMEM; - /* supcard all relevant hardware speeds... we expect that when + /* copy descriptors, and track endpoint copies */ + f->descriptors = usb_copy_descriptors(f_audio_desc); + + /* + * support all relevant hardware speeds... we expect that when * hardware is dual speed, all bulk-capable endpoints work at * both speeds */ - - /* copy descriptors, and track endpoint copies */ if (gadget_is_dualspeed(c->cdev->gadget)) { c->highspeed = true; f->hs_descriptors = usb_copy_descriptors(f_audio_desc); - } else - f->descriptors = usb_copy_descriptors(f_audio_desc); + } return 0; diff --git a/drivers/usb/gadget/f_ecm.c b/drivers/usb/gadget/f_ecm.c index 3691a0cb9465..11c07cb7d337 100644 --- a/drivers/usb/gadget/f_ecm.c +++ b/drivers/usb/gadget/f_ecm.c @@ -8,15 +8,6 @@ * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ /* #define VERBOSE_DEBUG */ diff --git a/drivers/usb/gadget/f_eem.c b/drivers/usb/gadget/f_eem.c index 046c6d0e6960..1a7b2dd7d408 100644 --- a/drivers/usb/gadget/f_eem.c +++ b/drivers/usb/gadget/f_eem.c @@ -9,15 +9,6 @@ * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include <linux/kernel.h> diff --git a/drivers/usb/gadget/f_fs.c b/drivers/usb/gadget/f_fs.c index c161a9aaeb7e..6b1c20b6c9b2 100644 --- a/drivers/usb/gadget/f_fs.c +++ b/drivers/usb/gadget/f_fs.c @@ -12,15 +12,6 @@ * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ diff --git a/drivers/usb/gadget/f_hid.c b/drivers/usb/gadget/f_hid.c index 83a266bdb40e..b2113420b806 100644 --- a/drivers/usb/gadget/f_hid.c +++ b/drivers/usb/gadget/f_hid.c @@ -7,15 +7,6 @@ * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include <linux/kernel.h> diff --git a/drivers/usb/gadget/f_loopback.c b/drivers/usb/gadget/f_loopback.c index ca660d40b11a..6d87f288df4e 100644 --- a/drivers/usb/gadget/f_loopback.c +++ b/drivers/usb/gadget/f_loopback.c @@ -8,15 +8,6 @@ * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ /* #define VERBOSE_DEBUG */ diff --git a/drivers/usb/gadget/f_mass_storage.c b/drivers/usb/gadget/f_mass_storage.c index 5b9339582007..52583a235330 100644 --- a/drivers/usb/gadget/f_mass_storage.c +++ b/drivers/usb/gadget/f_mass_storage.c @@ -112,8 +112,7 @@ * is not loaded (an empty string as "filename" in the fsg_config * structure causes error). The CD-ROM emulation includes a single * data track and no audio tracks; hence there need be only one - * backing file per LUN. Note also that the CD-ROM block length is - * set to 512 rather than the more common value 2048. + * backing file per LUN. * * * MSF includes support for module parameters. If gadget using it @@ -363,7 +362,7 @@ struct fsg_common { struct fsg_buffhd *next_buffhd_to_fill; struct fsg_buffhd *next_buffhd_to_drain; - struct fsg_buffhd buffhds[FSG_NUM_BUFFERS]; + struct fsg_buffhd *buffhds; int cmnd_size; u8 cmnd[MAX_COMMAND_SIZE]; @@ -745,7 +744,6 @@ static int do_read(struct fsg_common *common) u32 amount_left; loff_t file_offset, file_offset_tmp; unsigned int amount; - unsigned int partial_page; ssize_t nread; /* @@ -771,7 +769,7 @@ static int do_read(struct fsg_common *common) curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; return -EINVAL; } - file_offset = ((loff_t) lba) << 9; + file_offset = ((loff_t) lba) << curlun->blkbits; /* Carry out the file reads */ amount_left = common->data_size_from_cmnd; @@ -784,18 +782,10 @@ static int do_read(struct fsg_common *common) * Try to read the remaining amount. * But don't read more than the buffer size. * And don't try to read past the end of the file. - * Finally, if we're not at a page boundary, don't read past - * the next page. - * If this means reading 0 then we were asked to read past - * the end of file. */ amount = min(amount_left, FSG_BUFLEN); amount = min((loff_t)amount, curlun->file_length - file_offset); - partial_page = file_offset & (PAGE_CACHE_SIZE - 1); - if (partial_page > 0) - amount = min(amount, (unsigned int)PAGE_CACHE_SIZE - - partial_page); /* Wait for the next buffer to become available */ bh = common->next_buffhd_to_fill; @@ -812,7 +802,8 @@ static int do_read(struct fsg_common *common) if (amount == 0) { curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; - curlun->sense_data_info = file_offset >> 9; + curlun->sense_data_info = + file_offset >> curlun->blkbits; curlun->info_valid = 1; bh->inreq->length = 0; bh->state = BUF_STATE_FULL; @@ -835,18 +826,25 @@ static int do_read(struct fsg_common *common) } else if (nread < amount) { LDBG(curlun, "partial file read: %d/%u\n", (int)nread, amount); - nread -= (nread & 511); /* Round down to a block */ + nread = round_down(nread, curlun->blksize); } file_offset += nread; amount_left -= nread; common->residue -= nread; + + /* + * Except at the end of the transfer, nread will be + * equal to the buffer size, which is divisible by the + * bulk-in maxpacket size. + */ bh->inreq->length = nread; bh->state = BUF_STATE_FULL; /* If an error occurred, report it and its position */ if (nread < amount) { curlun->sense_data = SS_UNRECOVERED_READ_ERROR; - curlun->sense_data_info = file_offset >> 9; + curlun->sense_data_info = + file_offset >> curlun->blkbits; curlun->info_valid = 1; break; } @@ -877,7 +875,6 @@ static int do_write(struct fsg_common *common) u32 amount_left_to_req, amount_left_to_write; loff_t usb_offset, file_offset, file_offset_tmp; unsigned int amount; - unsigned int partial_page; ssize_t nwritten; int rc; @@ -921,7 +918,7 @@ static int do_write(struct fsg_common *common) /* Carry out the file writes */ get_some_more = 1; - file_offset = usb_offset = ((loff_t) lba) << 9; + file_offset = usb_offset = ((loff_t) lba) << curlun->blkbits; amount_left_to_req = common->data_size_from_cmnd; amount_left_to_write = common->data_size_from_cmnd; @@ -933,41 +930,21 @@ static int do_write(struct fsg_common *common) /* * Figure out how much we want to get: - * Try to get the remaining amount. - * But don't get more than the buffer size. - * And don't try to go past the end of the file. - * If we're not at a page boundary, - * don't go past the next page. - * If this means getting 0, then we were asked - * to write past the end of file. - * Finally, round down to a block boundary. + * Try to get the remaining amount, + * but not more than the buffer size. */ amount = min(amount_left_to_req, FSG_BUFLEN); - amount = min((loff_t)amount, - curlun->file_length - usb_offset); - partial_page = usb_offset & (PAGE_CACHE_SIZE - 1); - if (partial_page > 0) - amount = min(amount, - (unsigned int)PAGE_CACHE_SIZE - partial_page); - - if (amount == 0) { + + /* Beyond the end of the backing file? */ + if (usb_offset >= curlun->file_length) { get_some_more = 0; curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; - curlun->sense_data_info = usb_offset >> 9; + curlun->sense_data_info = + usb_offset >> curlun->blkbits; curlun->info_valid = 1; continue; } - amount -= amount & 511; - if (amount == 0) { - - /* - * Why were we were asked to transfer a - * partial block? - */ - get_some_more = 0; - continue; - } /* Get the next buffer */ usb_offset += amount; @@ -977,12 +954,11 @@ static int do_write(struct fsg_common *common) get_some_more = 0; /* - * amount is always divisible by 512, hence by - * the bulk-out maxpacket size + * Except at the end of the transfer, amount will be + * equal to the buffer size, which is divisible by + * the bulk-out maxpacket size. */ - bh->outreq->length = amount; - bh->bulk_out_intended_length = amount; - bh->outreq->short_not_ok = 1; + set_bulk_out_req_length(common, bh, amount); if (!start_out_transfer(common, bh)) /* Dunno what to do if common->fsg is NULL */ return -EIO; @@ -1002,7 +978,8 @@ static int do_write(struct fsg_common *common) /* Did something go wrong with the transfer? */ if (bh->outreq->status != 0) { curlun->sense_data = SS_COMMUNICATION_FAILURE; - curlun->sense_data_info = file_offset >> 9; + curlun->sense_data_info = + file_offset >> curlun->blkbits; curlun->info_valid = 1; break; } @@ -1016,6 +993,16 @@ static int do_write(struct fsg_common *common) amount = curlun->file_length - file_offset; } + /* Don't accept excess data. The spec doesn't say + * what to do in this case. We'll ignore the error. + */ + amount = min(amount, bh->bulk_out_intended_length); + + /* Don't write a partial block */ + amount = round_down(amount, curlun->blksize); + if (amount == 0) + goto empty_write; + /* Perform the write */ file_offset_tmp = file_offset; nwritten = vfs_write(curlun->filp, @@ -1033,8 +1020,7 @@ static int do_write(struct fsg_common *common) } else if (nwritten < amount) { LDBG(curlun, "partial file write: %d/%u\n", (int)nwritten, amount); - nwritten -= (nwritten & 511); - /* Round down to a block */ + nwritten = round_down(nwritten, curlun->blksize); } file_offset += nwritten; amount_left_to_write -= nwritten; @@ -1043,13 +1029,15 @@ static int do_write(struct fsg_common *common) /* If an error occurred, report it and its position */ if (nwritten < amount) { curlun->sense_data = SS_WRITE_ERROR; - curlun->sense_data_info = file_offset >> 9; + curlun->sense_data_info = + file_offset >> curlun->blkbits; curlun->info_valid = 1; break; } + empty_write: /* Did the host decide to stop early? */ - if (bh->outreq->actual != bh->outreq->length) { + if (bh->outreq->actual < bh->bulk_out_intended_length) { common->short_packet_received = 1; break; } @@ -1129,8 +1117,8 @@ static int do_verify(struct fsg_common *common) return -EIO; /* No default reply */ /* Prepare to carry out the file verify */ - amount_left = verification_length << 9; - file_offset = ((loff_t) lba) << 9; + amount_left = verification_length << curlun->blkbits; + file_offset = ((loff_t) lba) << curlun->blkbits; /* Write out all the dirty buffers before invalidating them */ fsg_lun_fsync_sub(curlun); @@ -1148,8 +1136,6 @@ static int do_verify(struct fsg_common *common) * Try to read the remaining amount, but not more than * the buffer size. * And don't try to read past the end of the file. - * If this means reading 0 then we were asked to read - * past the end of file. */ amount = min(amount_left, FSG_BUFLEN); amount = min((loff_t)amount, @@ -1157,7 +1143,8 @@ static int do_verify(struct fsg_common *common) if (amount == 0) { curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; - curlun->sense_data_info = file_offset >> 9; + curlun->sense_data_info = + file_offset >> curlun->blkbits; curlun->info_valid = 1; break; } @@ -1179,11 +1166,12 @@ static int do_verify(struct fsg_common *common) } else if (nread < amount) { LDBG(curlun, "partial file verify: %d/%u\n", (int)nread, amount); - nread -= nread & 511; /* Round down to a sector */ + nread = round_down(nread, curlun->blksize); } if (nread == 0) { curlun->sense_data = SS_UNRECOVERED_READ_ERROR; - curlun->sense_data_info = file_offset >> 9; + curlun->sense_data_info = + file_offset >> curlun->blkbits; curlun->info_valid = 1; break; } @@ -1289,7 +1277,7 @@ static int do_read_capacity(struct fsg_common *common, struct fsg_buffhd *bh) put_unaligned_be32(curlun->num_sectors - 1, &buf[0]); /* Max logical block */ - put_unaligned_be32(512, &buf[4]); /* Block length */ + put_unaligned_be32(curlun->blksize, &buf[4]);/* Block length */ return 8; } @@ -1527,7 +1515,7 @@ static int do_read_format_capacities(struct fsg_common *common, put_unaligned_be32(curlun->num_sectors, &buf[0]); /* Number of blocks */ - put_unaligned_be32(512, &buf[4]); /* Block length */ + put_unaligned_be32(curlun->blksize, &buf[4]);/* Block length */ buf[4] = 0x02; /* Current capacity */ return 12; } @@ -1607,7 +1595,7 @@ static int throw_away_data(struct fsg_common *common) common->next_buffhd_to_drain = bh->next; /* A short packet or an error ends everything */ - if (bh->outreq->actual != bh->outreq->length || + if (bh->outreq->actual < bh->bulk_out_intended_length || bh->outreq->status != 0) { raise_exception(common, FSG_STATE_ABORT_BULK_OUT); @@ -1623,12 +1611,11 @@ static int throw_away_data(struct fsg_common *common) amount = min(common->usb_amount_left, FSG_BUFLEN); /* - * amount is always divisible by 512, hence by + * Except at the end of the transfer, amount will be + * equal to the buffer size, which is divisible by * the bulk-out maxpacket size. */ - bh->outreq->length = amount; - bh->bulk_out_intended_length = amount; - bh->outreq->short_not_ok = 1; + set_bulk_out_req_length(common, bh, amount); if (!start_out_transfer(common, bh)) /* Dunno what to do if common->fsg is NULL */ return -EIO; @@ -2022,7 +2009,8 @@ static int do_scsi_command(struct fsg_common *common) case READ_6: i = common->cmnd[4]; - common->data_size_from_cmnd = (i == 0 ? 256 : i) << 9; + common->data_size_from_cmnd = (i == 0 ? 256 : i) << + common->curlun->blkbits; reply = check_command(common, 6, DATA_DIR_TO_HOST, (7<<1) | (1<<4), 1, "READ(6)"); @@ -2032,7 +2020,8 @@ static int do_scsi_command(struct fsg_common *common) case READ_10: common->data_size_from_cmnd = - get_unaligned_be16(&common->cmnd[7]) << 9; + get_unaligned_be16(&common->cmnd[7]) << + common->curlun->blkbits; reply = check_command(common, 10, DATA_DIR_TO_HOST, (1<<1) | (0xf<<2) | (3<<7), 1, "READ(10)"); @@ -2042,7 +2031,8 @@ static int do_scsi_command(struct fsg_common *common) case READ_12: common->data_size_from_cmnd = - get_unaligned_be32(&common->cmnd[6]) << 9; + get_unaligned_be32(&common->cmnd[6]) << + common->curlun->blkbits; reply = check_command(common, 12, DATA_DIR_TO_HOST, (1<<1) | (0xf<<2) | (0xf<<6), 1, "READ(12)"); @@ -2142,7 +2132,8 @@ static int do_scsi_command(struct fsg_common *common) case WRITE_6: i = common->cmnd[4]; - common->data_size_from_cmnd = (i == 0 ? 256 : i) << 9; + common->data_size_from_cmnd = (i == 0 ? 256 : i) << + common->curlun->blkbits; reply = check_command(common, 6, DATA_DIR_FROM_HOST, (7<<1) | (1<<4), 1, "WRITE(6)"); @@ -2152,7 +2143,8 @@ static int do_scsi_command(struct fsg_common *common) case WRITE_10: common->data_size_from_cmnd = - get_unaligned_be16(&common->cmnd[7]) << 9; + get_unaligned_be16(&common->cmnd[7]) << + common->curlun->blkbits; reply = check_command(common, 10, DATA_DIR_FROM_HOST, (1<<1) | (0xf<<2) | (3<<7), 1, "WRITE(10)"); @@ -2162,7 +2154,8 @@ static int do_scsi_command(struct fsg_common *common) case WRITE_12: common->data_size_from_cmnd = - get_unaligned_be32(&common->cmnd[6]) << 9; + get_unaligned_be32(&common->cmnd[6]) << + common->curlun->blkbits; reply = check_command(common, 12, DATA_DIR_FROM_HOST, (1<<1) | (0xf<<2) | (0xf<<6), 1, "WRITE(12)"); @@ -2297,7 +2290,6 @@ static int get_next_command(struct fsg_common *common) /* Queue a request to read a Bulk-only CBW */ set_bulk_out_req_length(common, bh, USB_BULK_CB_WRAP_LEN); - bh->outreq->short_not_ok = 1; if (!start_out_transfer(common, bh)) /* Don't know what to do if common->fsg is NULL */ return -EIO; @@ -2348,7 +2340,7 @@ reset: if (common->fsg) { fsg = common->fsg; - for (i = 0; i < FSG_NUM_BUFFERS; ++i) { + for (i = 0; i < fsg_num_buffers; ++i) { struct fsg_buffhd *bh = &common->buffhds[i]; if (bh->inreq) { @@ -2401,12 +2393,11 @@ reset: goto reset; fsg->bulk_out->driver_data = common; fsg->bulk_out_enabled = 1; - common->bulk_out_maxpacket = - le16_to_cpu(fsg->bulk_out->desc->wMaxPacketSize); + common->bulk_out_maxpacket = usb_endpoint_maxp(fsg->bulk_out->desc); clear_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags); /* Allocate the requests */ - for (i = 0; i < FSG_NUM_BUFFERS; ++i) { + for (i = 0; i < fsg_num_buffers; ++i) { struct fsg_buffhd *bh = &common->buffhds[i]; rc = alloc_request(common, fsg->bulk_in, &bh->inreq); @@ -2475,7 +2466,7 @@ static void handle_exception(struct fsg_common *common) /* Cancel all the pending transfers */ if (likely(common->fsg)) { - for (i = 0; i < FSG_NUM_BUFFERS; ++i) { + for (i = 0; i < fsg_num_buffers; ++i) { bh = &common->buffhds[i]; if (bh->inreq_busy) usb_ep_dequeue(common->fsg->bulk_in, bh->inreq); @@ -2487,7 +2478,7 @@ static void handle_exception(struct fsg_common *common) /* Wait until everything is idle */ for (;;) { int num_active = 0; - for (i = 0; i < FSG_NUM_BUFFERS; ++i) { + for (i = 0; i < fsg_num_buffers; ++i) { bh = &common->buffhds[i]; num_active += bh->inreq_busy + bh->outreq_busy; } @@ -2510,7 +2501,7 @@ static void handle_exception(struct fsg_common *common) */ spin_lock_irq(&common->lock); - for (i = 0; i < FSG_NUM_BUFFERS; ++i) { + for (i = 0; i < fsg_num_buffers; ++i) { bh = &common->buffhds[i]; bh->state = BUF_STATE_EMPTY; } @@ -2719,6 +2710,10 @@ static struct fsg_common *fsg_common_init(struct fsg_common *common, int nluns, i, rc; char *pathbuf; + rc = fsg_num_buffers_validate(); + if (rc != 0) + return ERR_PTR(rc); + /* Find out how many LUNs there should be */ nluns = cfg->nluns; if (nluns < 1 || nluns > FSG_MAX_LUNS) { @@ -2737,6 +2732,14 @@ static struct fsg_common *fsg_common_init(struct fsg_common *common, common->free_storage_on_release = 0; } + common->buffhds = kcalloc(fsg_num_buffers, + sizeof *(common->buffhds), GFP_KERNEL); + if (!common->buffhds) { + if (common->free_storage_on_release) + kfree(common); + return ERR_PTR(-ENOMEM); + } + common->ops = cfg->ops; common->private_data = cfg->private_data; @@ -2814,7 +2817,7 @@ static struct fsg_common *fsg_common_init(struct fsg_common *common, /* Data buffers cyclic list */ bh = common->buffhds; - i = FSG_NUM_BUFFERS; + i = fsg_num_buffers; goto buffhds_first_it; do { bh->next = bh + 1; @@ -2940,12 +2943,13 @@ static void fsg_common_release(struct kref *ref) { struct fsg_buffhd *bh = common->buffhds; - unsigned i = FSG_NUM_BUFFERS; + unsigned i = fsg_num_buffers; do { kfree(bh->buf); } while (++bh, --i); } + kfree(common->buffhds); if (common->free_storage_on_release) kfree(common); } @@ -3019,6 +3023,28 @@ static int fsg_bind(struct usb_configuration *c, struct usb_function *f) } } + if (gadget_is_superspeed(gadget)) { + unsigned max_burst; + + /* Calculate bMaxBurst, we know packet size is 1024 */ + max_burst = min_t(unsigned, FSG_BUFLEN / 1024, 15); + + fsg_ss_bulk_in_desc.bEndpointAddress = + fsg_fs_bulk_in_desc.bEndpointAddress; + fsg_ss_bulk_in_comp_desc.bMaxBurst = max_burst; + + fsg_ss_bulk_out_desc.bEndpointAddress = + fsg_fs_bulk_out_desc.bEndpointAddress; + fsg_ss_bulk_out_comp_desc.bMaxBurst = max_burst; + + f->ss_descriptors = usb_copy_descriptors(fsg_ss_function); + if (unlikely(!f->ss_descriptors)) { + usb_free_descriptors(f->hs_descriptors); + usb_free_descriptors(f->descriptors); + return -ENOMEM; + } + } + return 0; autoconf_fail: diff --git a/drivers/usb/gadget/f_midi.c b/drivers/usb/gadget/f_midi.c new file mode 100644 index 000000000000..67b222908cf9 --- /dev/null +++ b/drivers/usb/gadget/f_midi.c @@ -0,0 +1,998 @@ +/* + * f_midi.c -- USB MIDI class function driver + * + * Copyright (C) 2006 Thumtronics Pty Ltd. + * Developed for Thumtronics by Grey Innovation + * Ben Williamson <ben.williamson@greyinnovation.com> + * + * Rewritten for the composite framework + * Copyright (C) 2011 Daniel Mack <zonque@gmail.com> + * + * Based on drivers/usb/gadget/f_audio.c, + * Copyright (C) 2008 Bryan Wu <cooloney@kernel.org> + * Copyright (C) 2008 Analog Devices, Inc + * + * and drivers/usb/gadget/midi.c, + * Copyright (C) 2006 Thumtronics Pty Ltd. + * Ben Williamson <ben.williamson@greyinnovation.com> + * + * Licensed under the GPL-2 or later. + */ + +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/utsname.h> +#include <linux/device.h> + +#include <sound/core.h> +#include <sound/initval.h> +#include <sound/rawmidi.h> + +#include <linux/usb/ch9.h> +#include <linux/usb/gadget.h> +#include <linux/usb/audio.h> +#include <linux/usb/midi.h> + +MODULE_AUTHOR("Ben Williamson"); +MODULE_LICENSE("GPL v2"); + +static const char f_midi_shortname[] = "f_midi"; +static const char f_midi_longname[] = "MIDI Gadget"; + +/* + * We can only handle 16 cables on one single endpoint, as cable numbers are + * stored in 4-bit fields. And as the interface currently only holds one + * single endpoint, this is the maximum number of ports we can allow. + */ +#define MAX_PORTS 16 + +/* + * This is a gadget, and the IN/OUT naming is from the host's perspective. + * USB -> OUT endpoint -> rawmidi + * USB <- IN endpoint <- rawmidi + */ +struct gmidi_in_port { + struct f_midi *midi; + int active; + uint8_t cable; + uint8_t state; +#define STATE_UNKNOWN 0 +#define STATE_1PARAM 1 +#define STATE_2PARAM_1 2 +#define STATE_2PARAM_2 3 +#define STATE_SYSEX_0 4 +#define STATE_SYSEX_1 5 +#define STATE_SYSEX_2 6 + uint8_t data[2]; +}; + +struct f_midi { + struct usb_function func; + struct usb_gadget *gadget; + struct usb_ep *in_ep, *out_ep; + struct snd_card *card; + struct snd_rawmidi *rmidi; + + struct snd_rawmidi_substream *in_substream[MAX_PORTS]; + struct snd_rawmidi_substream *out_substream[MAX_PORTS]; + struct gmidi_in_port *in_port[MAX_PORTS]; + + unsigned long out_triggered; + struct tasklet_struct tasklet; + unsigned int in_ports; + unsigned int out_ports; + int index; + char *id; + unsigned int buflen, qlen; +}; + +static inline struct f_midi *func_to_midi(struct usb_function *f) +{ + return container_of(f, struct f_midi, func); +} + +static void f_midi_transmit(struct f_midi *midi, struct usb_request *req); + +DECLARE_UAC_AC_HEADER_DESCRIPTOR(1); +DECLARE_USB_MIDI_OUT_JACK_DESCRIPTOR(1); +DECLARE_USB_MIDI_OUT_JACK_DESCRIPTOR(16); +DECLARE_USB_MS_ENDPOINT_DESCRIPTOR(16); + +/* B.3.1 Standard AC Interface Descriptor */ +static struct usb_interface_descriptor ac_interface_desc __initdata = { + .bLength = USB_DT_INTERFACE_SIZE, + .bDescriptorType = USB_DT_INTERFACE, + /* .bInterfaceNumber = DYNAMIC */ + /* .bNumEndpoints = DYNAMIC */ + .bInterfaceClass = USB_CLASS_AUDIO, + .bInterfaceSubClass = USB_SUBCLASS_AUDIOCONTROL, + /* .iInterface = DYNAMIC */ +}; + +/* B.3.2 Class-Specific AC Interface Descriptor */ +static struct uac1_ac_header_descriptor_1 ac_header_desc __initdata = { + .bLength = UAC_DT_AC_HEADER_SIZE(1), + .bDescriptorType = USB_DT_CS_INTERFACE, + .bDescriptorSubtype = USB_MS_HEADER, + .bcdADC = cpu_to_le16(0x0100), + .wTotalLength = cpu_to_le16(UAC_DT_AC_HEADER_SIZE(1)), + .bInCollection = 1, + /* .baInterfaceNr = DYNAMIC */ +}; + +/* B.4.1 Standard MS Interface Descriptor */ +static struct usb_interface_descriptor ms_interface_desc __initdata = { + .bLength = USB_DT_INTERFACE_SIZE, + .bDescriptorType = USB_DT_INTERFACE, + /* .bInterfaceNumber = DYNAMIC */ + .bNumEndpoints = 2, + .bInterfaceClass = USB_CLASS_AUDIO, + .bInterfaceSubClass = USB_SUBCLASS_MIDISTREAMING, + /* .iInterface = DYNAMIC */ +}; + +/* B.4.2 Class-Specific MS Interface Descriptor */ +static struct usb_ms_header_descriptor ms_header_desc __initdata = { + .bLength = USB_DT_MS_HEADER_SIZE, + .bDescriptorType = USB_DT_CS_INTERFACE, + .bDescriptorSubtype = USB_MS_HEADER, + .bcdMSC = cpu_to_le16(0x0100), + /* .wTotalLength = DYNAMIC */ +}; + +/* B.4.3 Embedded MIDI IN Jack Descriptor */ +static struct usb_midi_in_jack_descriptor jack_in_emb_desc = { + .bLength = USB_DT_MIDI_IN_SIZE, + .bDescriptorType = USB_DT_CS_INTERFACE, + .bDescriptorSubtype = USB_MS_MIDI_IN_JACK, + .bJackType = USB_MS_EMBEDDED, + /* .bJackID = DYNAMIC */ +}; + +/* B.4.4 Embedded MIDI OUT Jack Descriptor */ +static struct usb_midi_out_jack_descriptor_16 jack_out_emb_desc = { + /* .bLength = DYNAMIC */ + .bDescriptorType = USB_DT_CS_INTERFACE, + .bDescriptorSubtype = USB_MS_MIDI_OUT_JACK, + .bJackType = USB_MS_EMBEDDED, + /* .bJackID = DYNAMIC */ + /* .bNrInputPins = DYNAMIC */ + /* .pins = DYNAMIC */ +}; + +/* B.5.1 Standard Bulk OUT Endpoint Descriptor */ +static struct usb_endpoint_descriptor bulk_out_desc = { + .bLength = USB_DT_ENDPOINT_AUDIO_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + .bEndpointAddress = USB_DIR_OUT, + .bmAttributes = USB_ENDPOINT_XFER_BULK, +}; + +/* B.5.2 Class-specific MS Bulk OUT Endpoint Descriptor */ +static struct usb_ms_endpoint_descriptor_16 ms_out_desc = { + /* .bLength = DYNAMIC */ + .bDescriptorType = USB_DT_CS_ENDPOINT, + .bDescriptorSubtype = USB_MS_GENERAL, + /* .bNumEmbMIDIJack = DYNAMIC */ + /* .baAssocJackID = DYNAMIC */ +}; + +/* B.6.1 Standard Bulk IN Endpoint Descriptor */ +static struct usb_endpoint_descriptor bulk_in_desc = { + .bLength = USB_DT_ENDPOINT_AUDIO_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + .bEndpointAddress = USB_DIR_IN, + .bmAttributes = USB_ENDPOINT_XFER_BULK, +}; + +/* B.6.2 Class-specific MS Bulk IN Endpoint Descriptor */ +static struct usb_ms_endpoint_descriptor_16 ms_in_desc = { + /* .bLength = DYNAMIC */ + .bDescriptorType = USB_DT_CS_ENDPOINT, + .bDescriptorSubtype = USB_MS_GENERAL, + /* .bNumEmbMIDIJack = DYNAMIC */ + /* .baAssocJackID = DYNAMIC */ +}; + +/* string IDs are assigned dynamically */ + +#define STRING_FUNC_IDX 0 + +static struct usb_string midi_string_defs[] = { + [STRING_FUNC_IDX].s = "MIDI function", + { } /* end of list */ +}; + +static struct usb_gadget_strings midi_stringtab = { + .language = 0x0409, /* en-us */ + .strings = midi_string_defs, +}; + +static struct usb_gadget_strings *midi_strings[] = { + &midi_stringtab, + NULL, +}; + +static struct usb_request *alloc_ep_req(struct usb_ep *ep, unsigned length) +{ + struct usb_request *req; + + req = usb_ep_alloc_request(ep, GFP_ATOMIC); + if (req) { + req->length = length; + req->buf = kmalloc(length, GFP_ATOMIC); + if (!req->buf) { + usb_ep_free_request(ep, req); + req = NULL; + } + } + return req; +} + +static void free_ep_req(struct usb_ep *ep, struct usb_request *req) +{ + kfree(req->buf); + usb_ep_free_request(ep, req); +} + +static const uint8_t f_midi_cin_length[] = { + 0, 0, 2, 3, 3, 1, 2, 3, 3, 3, 3, 3, 2, 2, 3, 1 +}; + +/* + * Receives a chunk of MIDI data. + */ +static void f_midi_read_data(struct usb_ep *ep, int cable, + uint8_t *data, int length) +{ + struct f_midi *midi = ep->driver_data; + struct snd_rawmidi_substream *substream = midi->out_substream[cable]; + + if (!substream) + /* Nobody is listening - throw it on the floor. */ + return; + + if (!test_bit(cable, &midi->out_triggered)) + return; + + snd_rawmidi_receive(substream, data, length); +} + +static void f_midi_handle_out_data(struct usb_ep *ep, struct usb_request *req) +{ + unsigned int i; + u8 *buf = req->buf; + + for (i = 0; i + 3 < req->actual; i += 4) + if (buf[i] != 0) { + int cable = buf[i] >> 4; + int length = f_midi_cin_length[buf[i] & 0x0f]; + f_midi_read_data(ep, cable, &buf[i + 1], length); + } +} + +static void +f_midi_complete(struct usb_ep *ep, struct usb_request *req) +{ + struct f_midi *midi = ep->driver_data; + struct usb_composite_dev *cdev = midi->func.config->cdev; + int status = req->status; + + switch (status) { + case 0: /* normal completion */ + if (ep == midi->out_ep) { + /* We received stuff. req is queued again, below */ + f_midi_handle_out_data(ep, req); + } else if (ep == midi->in_ep) { + /* Our transmit completed. See if there's more to go. + * f_midi_transmit eats req, don't queue it again. */ + f_midi_transmit(midi, req); + return; + } + break; + + /* this endpoint is normally active while we're configured */ + case -ECONNABORTED: /* hardware forced ep reset */ + case -ECONNRESET: /* request dequeued */ + case -ESHUTDOWN: /* disconnect from host */ + VDBG(cdev, "%s gone (%d), %d/%d\n", ep->name, status, + req->actual, req->length); + if (ep == midi->out_ep) + f_midi_handle_out_data(ep, req); + + free_ep_req(ep, req); + return; + + case -EOVERFLOW: /* buffer overrun on read means that + * we didn't provide a big enough buffer. + */ + default: + DBG(cdev, "%s complete --> %d, %d/%d\n", ep->name, + status, req->actual, req->length); + break; + case -EREMOTEIO: /* short read */ + break; + } + + status = usb_ep_queue(ep, req, GFP_ATOMIC); + if (status) { + ERROR(cdev, "kill %s: resubmit %d bytes --> %d\n", + ep->name, req->length, status); + usb_ep_set_halt(ep); + /* FIXME recover later ... somehow */ + } +} + +static int f_midi_start_ep(struct f_midi *midi, + struct usb_function *f, + struct usb_ep *ep) +{ + int err; + struct usb_composite_dev *cdev = f->config->cdev; + + if (ep->driver_data) + usb_ep_disable(ep); + + err = config_ep_by_speed(midi->gadget, f, ep); + if (err) { + ERROR(cdev, "can't configure %s: %d\n", ep->name, err); + return err; + } + + err = usb_ep_enable(ep); + if (err) { + ERROR(cdev, "can't start %s: %d\n", ep->name, err); + return err; + } + + ep->driver_data = midi; + + return 0; +} + +static int f_midi_set_alt(struct usb_function *f, unsigned intf, unsigned alt) +{ + struct f_midi *midi = func_to_midi(f); + struct usb_composite_dev *cdev = f->config->cdev; + unsigned i; + int err; + + err = f_midi_start_ep(midi, f, midi->in_ep); + if (err) + return err; + + err = f_midi_start_ep(midi, f, midi->out_ep); + if (err) + return err; + + if (midi->out_ep->driver_data) + usb_ep_disable(midi->out_ep); + + err = config_ep_by_speed(midi->gadget, f, midi->out_ep); + if (err) { + ERROR(cdev, "can't configure %s: %d\n", + midi->out_ep->name, err); + return err; + } + + err = usb_ep_enable(midi->out_ep); + if (err) { + ERROR(cdev, "can't start %s: %d\n", + midi->out_ep->name, err); + return err; + } + + midi->out_ep->driver_data = midi; + + /* allocate a bunch of read buffers and queue them all at once. */ + for (i = 0; i < midi->qlen && err == 0; i++) { + struct usb_request *req = + alloc_ep_req(midi->out_ep, midi->buflen); + if (req == NULL) + return -ENOMEM; + + req->complete = f_midi_complete; + err = usb_ep_queue(midi->out_ep, req, GFP_ATOMIC); + if (err) { + ERROR(midi, "%s queue req: %d\n", + midi->out_ep->name, err); + } + } + + return 0; +} + +static void f_midi_disable(struct usb_function *f) +{ + struct f_midi *midi = func_to_midi(f); + struct usb_composite_dev *cdev = f->config->cdev; + + DBG(cdev, "disable\n"); + + /* + * just disable endpoints, forcing completion of pending i/o. + * all our completion handlers free their requests in this case. + */ + usb_ep_disable(midi->in_ep); + usb_ep_disable(midi->out_ep); +} + +static void f_midi_unbind(struct usb_configuration *c, struct usb_function *f) +{ + struct usb_composite_dev *cdev = f->config->cdev; + struct f_midi *midi = func_to_midi(f); + struct snd_card *card; + + DBG(cdev, "unbind\n"); + + /* just to be sure */ + f_midi_disable(f); + + card = midi->card; + midi->card = NULL; + if (card) + snd_card_free(card); + + kfree(midi->id); + midi->id = NULL; + + usb_free_descriptors(f->descriptors); + kfree(midi); +} + +static int f_midi_snd_free(struct snd_device *device) +{ + return 0; +} + +static void f_midi_transmit_packet(struct usb_request *req, uint8_t p0, + uint8_t p1, uint8_t p2, uint8_t p3) +{ + unsigned length = req->length; + u8 *buf = (u8 *)req->buf + length; + + buf[0] = p0; + buf[1] = p1; + buf[2] = p2; + buf[3] = p3; + req->length = length + 4; +} + +/* + * Converts MIDI commands to USB MIDI packets. + */ +static void f_midi_transmit_byte(struct usb_request *req, + struct gmidi_in_port *port, uint8_t b) +{ + uint8_t p0 = port->cable << 4; + + if (b >= 0xf8) { + f_midi_transmit_packet(req, p0 | 0x0f, b, 0, 0); + } else if (b >= 0xf0) { + switch (b) { + case 0xf0: + port->data[0] = b; + port->state = STATE_SYSEX_1; + break; + case 0xf1: + case 0xf3: + port->data[0] = b; + port->state = STATE_1PARAM; + break; + case 0xf2: + port->data[0] = b; + port->state = STATE_2PARAM_1; + break; + case 0xf4: + case 0xf5: + port->state = STATE_UNKNOWN; + break; + case 0xf6: + f_midi_transmit_packet(req, p0 | 0x05, 0xf6, 0, 0); + port->state = STATE_UNKNOWN; + break; + case 0xf7: + switch (port->state) { + case STATE_SYSEX_0: + f_midi_transmit_packet(req, + p0 | 0x05, 0xf7, 0, 0); + break; + case STATE_SYSEX_1: + f_midi_transmit_packet(req, + p0 | 0x06, port->data[0], 0xf7, 0); + break; + case STATE_SYSEX_2: + f_midi_transmit_packet(req, + p0 | 0x07, port->data[0], + port->data[1], 0xf7); + break; + } + port->state = STATE_UNKNOWN; + break; + } + } else if (b >= 0x80) { + port->data[0] = b; + if (b >= 0xc0 && b <= 0xdf) + port->state = STATE_1PARAM; + else + port->state = STATE_2PARAM_1; + } else { /* b < 0x80 */ + switch (port->state) { + case STATE_1PARAM: + if (port->data[0] < 0xf0) { + p0 |= port->data[0] >> 4; + } else { + p0 |= 0x02; + port->state = STATE_UNKNOWN; + } + f_midi_transmit_packet(req, p0, port->data[0], b, 0); + break; + case STATE_2PARAM_1: + port->data[1] = b; + port->state = STATE_2PARAM_2; + break; + case STATE_2PARAM_2: + if (port->data[0] < 0xf0) { + p0 |= port->data[0] >> 4; + port->state = STATE_2PARAM_1; + } else { + p0 |= 0x03; + port->state = STATE_UNKNOWN; + } + f_midi_transmit_packet(req, + p0, port->data[0], port->data[1], b); + break; + case STATE_SYSEX_0: + port->data[0] = b; + port->state = STATE_SYSEX_1; + break; + case STATE_SYSEX_1: + port->data[1] = b; + port->state = STATE_SYSEX_2; + break; + case STATE_SYSEX_2: + f_midi_transmit_packet(req, + p0 | 0x04, port->data[0], port->data[1], b); + port->state = STATE_SYSEX_0; + break; + } + } +} + +static void f_midi_transmit(struct f_midi *midi, struct usb_request *req) +{ + struct usb_ep *ep = midi->in_ep; + int i; + + if (!ep) + return; + + if (!req) + req = alloc_ep_req(ep, midi->buflen); + + if (!req) { + ERROR(midi, "gmidi_transmit: alloc_ep_request failed\n"); + return; + } + req->length = 0; + req->complete = f_midi_complete; + + for (i = 0; i < MAX_PORTS; i++) { + struct gmidi_in_port *port = midi->in_port[i]; + struct snd_rawmidi_substream *substream = midi->in_substream[i]; + + if (!port || !port->active || !substream) + continue; + + while (req->length + 3 < midi->buflen) { + uint8_t b; + if (snd_rawmidi_transmit(substream, &b, 1) != 1) { + port->active = 0; + break; + } + f_midi_transmit_byte(req, port, b); + } + } + + if (req->length > 0) + usb_ep_queue(ep, req, GFP_ATOMIC); + else + free_ep_req(ep, req); +} + +static void f_midi_in_tasklet(unsigned long data) +{ + struct f_midi *midi = (struct f_midi *) data; + f_midi_transmit(midi, NULL); +} + +static int f_midi_in_open(struct snd_rawmidi_substream *substream) +{ + struct f_midi *midi = substream->rmidi->private_data; + + if (!midi->in_port[substream->number]) + return -EINVAL; + + VDBG(midi, "%s()\n", __func__); + midi->in_substream[substream->number] = substream; + midi->in_port[substream->number]->state = STATE_UNKNOWN; + return 0; +} + +static int f_midi_in_close(struct snd_rawmidi_substream *substream) +{ + struct f_midi *midi = substream->rmidi->private_data; + + VDBG(midi, "%s()\n", __func__); + return 0; +} + +static void f_midi_in_trigger(struct snd_rawmidi_substream *substream, int up) +{ + struct f_midi *midi = substream->rmidi->private_data; + + if (!midi->in_port[substream->number]) + return; + + VDBG(midi, "%s() %d\n", __func__, up); + midi->in_port[substream->number]->active = up; + if (up) + tasklet_hi_schedule(&midi->tasklet); +} + +static int f_midi_out_open(struct snd_rawmidi_substream *substream) +{ + struct f_midi *midi = substream->rmidi->private_data; + + if (substream->number >= MAX_PORTS) + return -EINVAL; + + VDBG(midi, "%s()\n", __func__); + midi->out_substream[substream->number] = substream; + return 0; +} + +static int f_midi_out_close(struct snd_rawmidi_substream *substream) +{ + struct f_midi *midi = substream->rmidi->private_data; + + VDBG(midi, "%s()\n", __func__); + return 0; +} + +static void f_midi_out_trigger(struct snd_rawmidi_substream *substream, int up) +{ + struct f_midi *midi = substream->rmidi->private_data; + + VDBG(midi, "%s()\n", __func__); + + if (up) + set_bit(substream->number, &midi->out_triggered); + else + clear_bit(substream->number, &midi->out_triggered); +} + +static struct snd_rawmidi_ops gmidi_in_ops = { + .open = f_midi_in_open, + .close = f_midi_in_close, + .trigger = f_midi_in_trigger, +}; + +static struct snd_rawmidi_ops gmidi_out_ops = { + .open = f_midi_out_open, + .close = f_midi_out_close, + .trigger = f_midi_out_trigger +}; + +/* register as a sound "card" */ +static int f_midi_register_card(struct f_midi *midi) +{ + struct snd_card *card; + struct snd_rawmidi *rmidi; + int err; + static struct snd_device_ops ops = { + .dev_free = f_midi_snd_free, + }; + + err = snd_card_create(midi->index, midi->id, THIS_MODULE, 0, &card); + if (err < 0) { + ERROR(midi, "snd_card_create() failed\n"); + goto fail; + } + midi->card = card; + + err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, midi, &ops); + if (err < 0) { + ERROR(midi, "snd_device_new() failed: error %d\n", err); + goto fail; + } + + strcpy(card->driver, f_midi_longname); + strcpy(card->longname, f_midi_longname); + strcpy(card->shortname, f_midi_shortname); + + /* Set up rawmidi */ + snd_component_add(card, "MIDI"); + err = snd_rawmidi_new(card, card->longname, 0, + midi->out_ports, midi->in_ports, &rmidi); + if (err < 0) { + ERROR(midi, "snd_rawmidi_new() failed: error %d\n", err); + goto fail; + } + midi->rmidi = rmidi; + strcpy(rmidi->name, card->shortname); + rmidi->info_flags = SNDRV_RAWMIDI_INFO_OUTPUT | + SNDRV_RAWMIDI_INFO_INPUT | + SNDRV_RAWMIDI_INFO_DUPLEX; + rmidi->private_data = midi; + + /* + * Yes, rawmidi OUTPUT = USB IN, and rawmidi INPUT = USB OUT. + * It's an upside-down world being a gadget. + */ + snd_rawmidi_set_ops(rmidi, SNDRV_RAWMIDI_STREAM_OUTPUT, &gmidi_in_ops); + snd_rawmidi_set_ops(rmidi, SNDRV_RAWMIDI_STREAM_INPUT, &gmidi_out_ops); + + snd_card_set_dev(card, &midi->gadget->dev); + + /* register it - we're ready to go */ + err = snd_card_register(card); + if (err < 0) { + ERROR(midi, "snd_card_register() failed\n"); + goto fail; + } + + VDBG(midi, "%s() finished ok\n", __func__); + return 0; + +fail: + if (midi->card) { + snd_card_free(midi->card); + midi->card = NULL; + } + return err; +} + +/* MIDI function driver setup/binding */ + +static int __init +f_midi_bind(struct usb_configuration *c, struct usb_function *f) +{ + struct usb_descriptor_header *midi_function[(MAX_PORTS * 2) + 12]; + struct usb_midi_in_jack_descriptor jack_in_ext_desc[MAX_PORTS]; + struct usb_midi_out_jack_descriptor_1 jack_out_ext_desc[MAX_PORTS]; + struct usb_composite_dev *cdev = c->cdev; + struct f_midi *midi = func_to_midi(f); + int status, n, jack = 1, i = 0; + + /* maybe allocate device-global string ID */ + if (midi_string_defs[0].id == 0) { + status = usb_string_id(c->cdev); + if (status < 0) + goto fail; + midi_string_defs[0].id = status; + } + + /* We have two interfaces, AudioControl and MIDIStreaming */ + status = usb_interface_id(c, f); + if (status < 0) + goto fail; + ac_interface_desc.bInterfaceNumber = status; + + status = usb_interface_id(c, f); + if (status < 0) + goto fail; + ms_interface_desc.bInterfaceNumber = status; + ac_header_desc.baInterfaceNr[0] = status; + + status = -ENODEV; + + /* allocate instance-specific endpoints */ + midi->in_ep = usb_ep_autoconfig(cdev->gadget, &bulk_in_desc); + if (!midi->in_ep) + goto fail; + midi->in_ep->driver_data = cdev; /* claim */ + + midi->out_ep = usb_ep_autoconfig(cdev->gadget, &bulk_out_desc); + if (!midi->out_ep) + goto fail; + midi->out_ep->driver_data = cdev; /* claim */ + + /* + * construct the function's descriptor set. As the number of + * input and output MIDI ports is configurable, we have to do + * it that way. + */ + + /* add the headers - these are always the same */ + midi_function[i++] = (struct usb_descriptor_header *) &ac_interface_desc; + midi_function[i++] = (struct usb_descriptor_header *) &ac_header_desc; + midi_function[i++] = (struct usb_descriptor_header *) &ms_interface_desc; + + /* calculate the header's wTotalLength */ + n = USB_DT_MS_HEADER_SIZE + + (1 + midi->in_ports) * USB_DT_MIDI_IN_SIZE + + (1 + midi->out_ports) * USB_DT_MIDI_OUT_SIZE(1); + ms_header_desc.wTotalLength = cpu_to_le16(n); + + midi_function[i++] = (struct usb_descriptor_header *) &ms_header_desc; + + /* we have one embedded IN jack */ + jack_in_emb_desc.bJackID = jack++; + midi_function[i++] = (struct usb_descriptor_header *) &jack_in_emb_desc; + + /* and a dynamic amount of external IN jacks */ + for (n = 0; n < midi->in_ports; n++) { + struct usb_midi_in_jack_descriptor *ext = &jack_in_ext_desc[n]; + + ext->bLength = USB_DT_MIDI_IN_SIZE; + ext->bDescriptorType = USB_DT_CS_INTERFACE; + ext->bDescriptorSubtype = USB_MS_MIDI_IN_JACK; + ext->bJackType = USB_MS_EXTERNAL; + ext->bJackID = jack++; + ext->iJack = 0; + + midi_function[i++] = (struct usb_descriptor_header *) ext; + } + + /* one embedded OUT jack ... */ + jack_out_emb_desc.bLength = USB_DT_MIDI_OUT_SIZE(midi->in_ports); + jack_out_emb_desc.bJackID = jack++; + jack_out_emb_desc.bNrInputPins = midi->in_ports; + /* ... which referencess all external IN jacks */ + for (n = 0; n < midi->in_ports; n++) { + jack_out_emb_desc.pins[n].baSourceID = jack_in_ext_desc[n].bJackID; + jack_out_emb_desc.pins[n].baSourcePin = 1; + } + + midi_function[i++] = (struct usb_descriptor_header *) &jack_out_emb_desc; + + /* and multiple external OUT jacks ... */ + for (n = 0; n < midi->out_ports; n++) { + struct usb_midi_out_jack_descriptor_1 *ext = &jack_out_ext_desc[n]; + int m; + + ext->bLength = USB_DT_MIDI_OUT_SIZE(1); + ext->bDescriptorType = USB_DT_CS_INTERFACE; + ext->bDescriptorSubtype = USB_MS_MIDI_OUT_JACK; + ext->bJackType = USB_MS_EXTERNAL; + ext->bJackID = jack++; + ext->bNrInputPins = 1; + ext->iJack = 0; + /* ... which all reference the same embedded IN jack */ + for (m = 0; m < midi->out_ports; m++) { + ext->pins[m].baSourceID = jack_in_emb_desc.bJackID; + ext->pins[m].baSourcePin = 1; + } + + midi_function[i++] = (struct usb_descriptor_header *) ext; + } + + /* configure the endpoint descriptors ... */ + ms_out_desc.bLength = USB_DT_MS_ENDPOINT_SIZE(midi->in_ports); + ms_out_desc.bNumEmbMIDIJack = midi->in_ports; + for (n = 0; n < midi->in_ports; n++) + ms_out_desc.baAssocJackID[n] = jack_in_emb_desc.bJackID; + + ms_in_desc.bLength = USB_DT_MS_ENDPOINT_SIZE(midi->out_ports); + ms_in_desc.bNumEmbMIDIJack = midi->out_ports; + for (n = 0; n < midi->out_ports; n++) + ms_in_desc.baAssocJackID[n] = jack_out_emb_desc.bJackID; + + /* ... and add them to the list */ + midi_function[i++] = (struct usb_descriptor_header *) &bulk_out_desc; + midi_function[i++] = (struct usb_descriptor_header *) &ms_out_desc; + midi_function[i++] = (struct usb_descriptor_header *) &bulk_in_desc; + midi_function[i++] = (struct usb_descriptor_header *) &ms_in_desc; + midi_function[i++] = NULL; + + /* + * support all relevant hardware speeds... we expect that when + * hardware is dual speed, all bulk-capable endpoints work at + * both speeds + */ + /* copy descriptors, and track endpoint copies */ + if (gadget_is_dualspeed(c->cdev->gadget)) { + c->highspeed = true; + bulk_in_desc.wMaxPacketSize = cpu_to_le16(512); + bulk_out_desc.wMaxPacketSize = cpu_to_le16(512); + f->hs_descriptors = usb_copy_descriptors(midi_function); + } else { + f->descriptors = usb_copy_descriptors(midi_function); + } + + return 0; + +fail: + /* we might as well release our claims on endpoints */ + if (midi->out_ep) + midi->out_ep->driver_data = NULL; + if (midi->in_ep) + midi->in_ep->driver_data = NULL; + + ERROR(cdev, "%s: can't bind, err %d\n", f->name, status); + + return status; +} + +/** + * f_midi_bind_config - add USB MIDI function to a configuration + * @c: the configuration to supcard the USB audio function + * @index: the soundcard index to use for the ALSA device creation + * @id: the soundcard id to use for the ALSA device creation + * @buflen: the buffer length to use + * @qlen the number of read requests to pre-allocate + * Context: single threaded during gadget setup + * + * Returns zero on success, else negative errno. + */ +int __init f_midi_bind_config(struct usb_configuration *c, + int index, char *id, + unsigned int in_ports, + unsigned int out_ports, + unsigned int buflen, + unsigned int qlen) +{ + struct f_midi *midi; + int status, i; + + /* sanity check */ + if (in_ports > MAX_PORTS || out_ports > MAX_PORTS) + return -EINVAL; + + /* allocate and initialize one new instance */ + midi = kzalloc(sizeof *midi, GFP_KERNEL); + if (!midi) { + status = -ENOMEM; + goto fail; + } + + for (i = 0; i < in_ports; i++) { + struct gmidi_in_port *port = kzalloc(sizeof(*port), GFP_KERNEL); + if (!port) { + status = -ENOMEM; + goto setup_fail; + } + + port->midi = midi; + port->active = 0; + port->cable = i; + midi->in_port[i] = port; + } + + midi->gadget = c->cdev->gadget; + tasklet_init(&midi->tasklet, f_midi_in_tasklet, (unsigned long) midi); + + /* set up ALSA midi devices */ + midi->in_ports = in_ports; + midi->out_ports = out_ports; + status = f_midi_register_card(midi); + if (status < 0) + goto setup_fail; + + midi->func.name = "gmidi function"; + midi->func.strings = midi_strings; + midi->func.bind = f_midi_bind; + midi->func.unbind = f_midi_unbind; + midi->func.set_alt = f_midi_set_alt; + midi->func.disable = f_midi_disable; + + midi->id = kstrdup(id, GFP_KERNEL); + midi->index = index; + midi->buflen = buflen; + midi->qlen = qlen; + + status = usb_add_function(c, &midi->func); + if (status) + goto setup_fail; + + return 0; + +setup_fail: + for (--i; i >= 0; i--) + kfree(midi->in_port[i]); + kfree(midi); +fail: + return status; +} + diff --git a/drivers/usb/gadget/f_ncm.c b/drivers/usb/gadget/f_ncm.c index ae69ed7e6b99..aab8eded045b 100644 --- a/drivers/usb/gadget/f_ncm.c +++ b/drivers/usb/gadget/f_ncm.c @@ -13,15 +13,6 @@ * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include <linux/kernel.h> diff --git a/drivers/usb/gadget/f_obex.c b/drivers/usb/gadget/f_obex.c index 394502abeb96..e3f74bf5da2d 100644 --- a/drivers/usb/gadget/f_obex.c +++ b/drivers/usb/gadget/f_obex.c @@ -10,15 +10,6 @@ * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ /* #define VERBOSE_DEBUG */ diff --git a/drivers/usb/gadget/f_phonet.c b/drivers/usb/gadget/f_phonet.c index 8f8d3f6cd89e..349077033338 100644 --- a/drivers/usb/gadget/f_phonet.c +++ b/drivers/usb/gadget/f_phonet.c @@ -8,16 +8,6 @@ * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA */ #include <linux/mm.h> @@ -434,6 +424,7 @@ static int pn_set_alt(struct usb_function *f, unsigned intf, unsigned alt) config_ep_by_speed(gadget, f, fp->out_ep)) { fp->in_ep->desc = NULL; fp->out_ep->desc = NULL; + spin_unlock(&port->lock); return -EINVAL; } usb_ep_enable(fp->out_ep); diff --git a/drivers/usb/gadget/f_rndis.c b/drivers/usb/gadget/f_rndis.c index 3ea4666be3d0..704d1d94f72a 100644 --- a/drivers/usb/gadget/f_rndis.c +++ b/drivers/usb/gadget/f_rndis.c @@ -11,15 +11,6 @@ * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ /* #define VERBOSE_DEBUG */ diff --git a/drivers/usb/gadget/f_sourcesink.c b/drivers/usb/gadget/f_sourcesink.c index e18b4f520951..168906d2b5d4 100644 --- a/drivers/usb/gadget/f_sourcesink.c +++ b/drivers/usb/gadget/f_sourcesink.c @@ -8,15 +8,6 @@ * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ /* #define VERBOSE_DEBUG */ diff --git a/drivers/usb/gadget/f_subset.c b/drivers/usb/gadget/f_subset.c index 3dc53754ab60..c1540648125a 100644 --- a/drivers/usb/gadget/f_subset.c +++ b/drivers/usb/gadget/f_subset.c @@ -8,15 +8,6 @@ * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include <linux/slab.h> diff --git a/drivers/usb/gadget/f_uvc.c b/drivers/usb/gadget/f_uvc.c index 7a8b9aa4aea5..2022fe492148 100644 --- a/drivers/usb/gadget/f_uvc.c +++ b/drivers/usb/gadget/f_uvc.c @@ -8,7 +8,6 @@ * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. - * */ #include <linux/kernel.h> diff --git a/drivers/usb/gadget/f_uvc.h b/drivers/usb/gadget/f_uvc.h index e18a6636c283..abf832935134 100644 --- a/drivers/usb/gadget/f_uvc.h +++ b/drivers/usb/gadget/f_uvc.h @@ -8,7 +8,6 @@ * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. - * */ #ifndef _F_UVC_H_ diff --git a/drivers/usb/gadget/file_storage.c b/drivers/usb/gadget/file_storage.c index 639e14a2fd15..3ac4f51cd0bb 100644 --- a/drivers/usb/gadget/file_storage.c +++ b/drivers/usb/gadget/file_storage.c @@ -69,8 +69,7 @@ * each LUN would be settable independently as a disk drive or a CD-ROM * drive, but currently all LUNs have to be the same type. The CD-ROM * emulation includes a single data track and no audio tracks; hence there - * need be only one backing file per LUN. Note also that the CD-ROM block - * length is set to 512 rather than the more common value 2048. + * need be only one backing file per LUN. * * Requirements are modest; only a bulk-in and a bulk-out endpoint are * needed (an interrupt-out endpoint is also needed for CBI). The memory @@ -461,7 +460,6 @@ struct fsg_dev { struct fsg_buffhd *next_buffhd_to_fill; struct fsg_buffhd *next_buffhd_to_drain; - struct fsg_buffhd buffhds[FSG_NUM_BUFFERS]; int thread_wakeup_needed; struct completion thread_notifier; @@ -488,6 +486,8 @@ struct fsg_dev { unsigned int nluns; struct fsg_lun *luns; struct fsg_lun *curlun; + /* Must be the last entry */ + struct fsg_buffhd buffhds[]; }; typedef void (*fsg_routine_t)(struct fsg_dev *); @@ -586,7 +586,19 @@ dev_qualifier = { .bNumConfigurations = 1, }; +static int populate_bos(struct fsg_dev *fsg, u8 *buf) +{ + memcpy(buf, &fsg_bos_desc, USB_DT_BOS_SIZE); + buf += USB_DT_BOS_SIZE; + + memcpy(buf, &fsg_ext_cap_desc, USB_DT_USB_EXT_CAP_SIZE); + buf += USB_DT_USB_EXT_CAP_SIZE; + memcpy(buf, &fsg_ss_cap_desc, USB_DT_USB_SS_CAP_SIZE); + + return USB_DT_BOS_SIZE + USB_DT_USB_SS_CAP_SIZE + + USB_DT_USB_EXT_CAP_SIZE; +} /* * Config descriptors must agree with the code that sets configurations @@ -935,7 +947,8 @@ static int standard_setup_req(struct fsg_dev *fsg, break; case USB_DT_DEVICE_QUALIFIER: VDBG(fsg, "get device qualifier\n"); - if (!gadget_is_dualspeed(fsg->gadget)) + if (!gadget_is_dualspeed(fsg->gadget) || + fsg->gadget->speed == USB_SPEED_SUPER) break; /* * Assume ep0 uses the same maxpacket value for both @@ -948,7 +961,8 @@ static int standard_setup_req(struct fsg_dev *fsg, case USB_DT_OTHER_SPEED_CONFIG: VDBG(fsg, "get other-speed config descriptor\n"); - if (!gadget_is_dualspeed(fsg->gadget)) + if (!gadget_is_dualspeed(fsg->gadget) || + fsg->gadget->speed == USB_SPEED_SUPER) break; goto get_config; case USB_DT_CONFIG: @@ -967,7 +981,15 @@ get_config: value = usb_gadget_get_string(&fsg_stringtab, w_value & 0xff, req->buf); break; + + case USB_DT_BOS: + VDBG(fsg, "get bos descriptor\n"); + + if (gadget_is_superspeed(fsg->gadget)) + value = populate_bos(fsg, req->buf); + break; } + break; /* One config, two speeds */ @@ -1136,7 +1158,6 @@ static int do_read(struct fsg_dev *fsg) u32 amount_left; loff_t file_offset, file_offset_tmp; unsigned int amount; - unsigned int partial_page; ssize_t nread; /* Get the starting Logical Block Address and check that it's @@ -1158,7 +1179,7 @@ static int do_read(struct fsg_dev *fsg) curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; return -EINVAL; } - file_offset = ((loff_t) lba) << 9; + file_offset = ((loff_t) lba) << curlun->blkbits; /* Carry out the file reads */ amount_left = fsg->data_size_from_cmnd; @@ -1171,17 +1192,10 @@ static int do_read(struct fsg_dev *fsg) * Try to read the remaining amount. * But don't read more than the buffer size. * And don't try to read past the end of the file. - * Finally, if we're not at a page boundary, don't read past - * the next page. - * If this means reading 0 then we were asked to read past - * the end of file. */ + */ amount = min((unsigned int) amount_left, mod_data.buflen); amount = min((loff_t) amount, curlun->file_length - file_offset); - partial_page = file_offset & (PAGE_CACHE_SIZE - 1); - if (partial_page > 0) - amount = min(amount, (unsigned int) PAGE_CACHE_SIZE - - partial_page); /* Wait for the next buffer to become available */ bh = fsg->next_buffhd_to_fill; @@ -1196,7 +1210,7 @@ static int do_read(struct fsg_dev *fsg) if (amount == 0) { curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; - curlun->sense_data_info = file_offset >> 9; + curlun->sense_data_info = file_offset >> curlun->blkbits; curlun->info_valid = 1; bh->inreq->length = 0; bh->state = BUF_STATE_FULL; @@ -1221,18 +1235,23 @@ static int do_read(struct fsg_dev *fsg) } else if (nread < amount) { LDBG(curlun, "partial file read: %d/%u\n", (int) nread, amount); - nread -= (nread & 511); // Round down to a block + nread = round_down(nread, curlun->blksize); } file_offset += nread; amount_left -= nread; fsg->residue -= nread; + + /* Except at the end of the transfer, nread will be + * equal to the buffer size, which is divisible by the + * bulk-in maxpacket size. + */ bh->inreq->length = nread; bh->state = BUF_STATE_FULL; /* If an error occurred, report it and its position */ if (nread < amount) { curlun->sense_data = SS_UNRECOVERED_READ_ERROR; - curlun->sense_data_info = file_offset >> 9; + curlun->sense_data_info = file_offset >> curlun->blkbits; curlun->info_valid = 1; break; } @@ -1262,7 +1281,6 @@ static int do_write(struct fsg_dev *fsg) u32 amount_left_to_req, amount_left_to_write; loff_t usb_offset, file_offset, file_offset_tmp; unsigned int amount; - unsigned int partial_page; ssize_t nwritten; int rc; @@ -1303,7 +1321,7 @@ static int do_write(struct fsg_dev *fsg) /* Carry out the file writes */ get_some_more = 1; - file_offset = usb_offset = ((loff_t) lba) << 9; + file_offset = usb_offset = ((loff_t) lba) << curlun->blkbits; amount_left_to_req = amount_left_to_write = fsg->data_size_from_cmnd; while (amount_left_to_write > 0) { @@ -1313,38 +1331,20 @@ static int do_write(struct fsg_dev *fsg) if (bh->state == BUF_STATE_EMPTY && get_some_more) { /* Figure out how much we want to get: - * Try to get the remaining amount. - * But don't get more than the buffer size. - * And don't try to go past the end of the file. - * If we're not at a page boundary, - * don't go past the next page. - * If this means getting 0, then we were asked - * to write past the end of file. - * Finally, round down to a block boundary. */ + * Try to get the remaining amount, + * but not more than the buffer size. + */ amount = min(amount_left_to_req, mod_data.buflen); - amount = min((loff_t) amount, curlun->file_length - - usb_offset); - partial_page = usb_offset & (PAGE_CACHE_SIZE - 1); - if (partial_page > 0) - amount = min(amount, - (unsigned int) PAGE_CACHE_SIZE - partial_page); - - if (amount == 0) { + + /* Beyond the end of the backing file? */ + if (usb_offset >= curlun->file_length) { get_some_more = 0; curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; - curlun->sense_data_info = usb_offset >> 9; + curlun->sense_data_info = usb_offset >> curlun->blkbits; curlun->info_valid = 1; continue; } - amount -= (amount & 511); - if (amount == 0) { - - /* Why were we were asked to transfer a - * partial block? */ - get_some_more = 0; - continue; - } /* Get the next buffer */ usb_offset += amount; @@ -1353,11 +1353,11 @@ static int do_write(struct fsg_dev *fsg) if (amount_left_to_req == 0) get_some_more = 0; - /* amount is always divisible by 512, hence by - * the bulk-out maxpacket size */ - bh->outreq->length = bh->bulk_out_intended_length = - amount; - bh->outreq->short_not_ok = 1; + /* Except at the end of the transfer, amount will be + * equal to the buffer size, which is divisible by + * the bulk-out maxpacket size. + */ + set_bulk_out_req_length(fsg, bh, amount); start_transfer(fsg, fsg->bulk_out, bh->outreq, &bh->outreq_busy, &bh->state); fsg->next_buffhd_to_fill = bh->next; @@ -1376,7 +1376,7 @@ static int do_write(struct fsg_dev *fsg) /* Did something go wrong with the transfer? */ if (bh->outreq->status != 0) { curlun->sense_data = SS_COMMUNICATION_FAILURE; - curlun->sense_data_info = file_offset >> 9; + curlun->sense_data_info = file_offset >> curlun->blkbits; curlun->info_valid = 1; break; } @@ -1390,6 +1390,16 @@ static int do_write(struct fsg_dev *fsg) amount = curlun->file_length - file_offset; } + /* Don't accept excess data. The spec doesn't say + * what to do in this case. We'll ignore the error. + */ + amount = min(amount, bh->bulk_out_intended_length); + + /* Don't write a partial block */ + amount = round_down(amount, curlun->blksize); + if (amount == 0) + goto empty_write; + /* Perform the write */ file_offset_tmp = file_offset; nwritten = vfs_write(curlun->filp, @@ -1408,8 +1418,7 @@ static int do_write(struct fsg_dev *fsg) } else if (nwritten < amount) { LDBG(curlun, "partial file write: %d/%u\n", (int) nwritten, amount); - nwritten -= (nwritten & 511); - // Round down to a block + nwritten = round_down(nwritten, curlun->blksize); } file_offset += nwritten; amount_left_to_write -= nwritten; @@ -1418,13 +1427,14 @@ static int do_write(struct fsg_dev *fsg) /* If an error occurred, report it and its position */ if (nwritten < amount) { curlun->sense_data = SS_WRITE_ERROR; - curlun->sense_data_info = file_offset >> 9; + curlun->sense_data_info = file_offset >> curlun->blkbits; curlun->info_valid = 1; break; } + empty_write: /* Did the host decide to stop early? */ - if (bh->outreq->actual != bh->outreq->length) { + if (bh->outreq->actual < bh->bulk_out_intended_length) { fsg->short_packet_received = 1; break; } @@ -1500,8 +1510,8 @@ static int do_verify(struct fsg_dev *fsg) return -EIO; // No default reply /* Prepare to carry out the file verify */ - amount_left = verification_length << 9; - file_offset = ((loff_t) lba) << 9; + amount_left = verification_length << curlun->blkbits; + file_offset = ((loff_t) lba) << curlun->blkbits; /* Write out all the dirty buffers before invalidating them */ fsg_lun_fsync_sub(curlun); @@ -1519,15 +1529,14 @@ static int do_verify(struct fsg_dev *fsg) * Try to read the remaining amount, but not more than * the buffer size. * And don't try to read past the end of the file. - * If this means reading 0 then we were asked to read - * past the end of file. */ + */ amount = min((unsigned int) amount_left, mod_data.buflen); amount = min((loff_t) amount, curlun->file_length - file_offset); if (amount == 0) { curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; - curlun->sense_data_info = file_offset >> 9; + curlun->sense_data_info = file_offset >> curlun->blkbits; curlun->info_valid = 1; break; } @@ -1550,11 +1559,11 @@ static int do_verify(struct fsg_dev *fsg) } else if (nread < amount) { LDBG(curlun, "partial file verify: %d/%u\n", (int) nread, amount); - nread -= (nread & 511); // Round down to a sector + nread = round_down(nread, curlun->blksize); } if (nread == 0) { curlun->sense_data = SS_UNRECOVERED_READ_ERROR; - curlun->sense_data_info = file_offset >> 9; + curlun->sense_data_info = file_offset >> curlun->blkbits; curlun->info_valid = 1; break; } @@ -1668,7 +1677,7 @@ static int do_read_capacity(struct fsg_dev *fsg, struct fsg_buffhd *bh) put_unaligned_be32(curlun->num_sectors - 1, &buf[0]); /* Max logical block */ - put_unaligned_be32(512, &buf[4]); /* Block length */ + put_unaligned_be32(curlun->blksize, &buf[4]); /* Block length */ return 8; } @@ -1890,7 +1899,7 @@ static int do_read_format_capacities(struct fsg_dev *fsg, put_unaligned_be32(curlun->num_sectors, &buf[0]); /* Number of blocks */ - put_unaligned_be32(512, &buf[4]); /* Block length */ + put_unaligned_be32(curlun->blksize, &buf[4]); /* Block length */ buf[4] = 0x02; /* Current capacity */ return 12; } @@ -1969,7 +1978,7 @@ static int throw_away_data(struct fsg_dev *fsg) fsg->next_buffhd_to_drain = bh->next; /* A short packet or an error ends everything */ - if (bh->outreq->actual != bh->outreq->length || + if (bh->outreq->actual < bh->bulk_out_intended_length || bh->outreq->status != 0) { raise_exception(fsg, FSG_STATE_ABORT_BULK_OUT); return -EINTR; @@ -1983,11 +1992,11 @@ static int throw_away_data(struct fsg_dev *fsg) amount = min(fsg->usb_amount_left, (u32) mod_data.buflen); - /* amount is always divisible by 512, hence by - * the bulk-out maxpacket size */ - bh->outreq->length = bh->bulk_out_intended_length = - amount; - bh->outreq->short_not_ok = 1; + /* Except at the end of the transfer, amount will be + * equal to the buffer size, which is divisible by + * the bulk-out maxpacket size. + */ + set_bulk_out_req_length(fsg, bh, amount); start_transfer(fsg, fsg->bulk_out, bh->outreq, &bh->outreq_busy, &bh->state); fsg->next_buffhd_to_fill = bh->next; @@ -2415,7 +2424,7 @@ static int do_scsi_command(struct fsg_dev *fsg) case READ_6: i = fsg->cmnd[4]; - fsg->data_size_from_cmnd = (i == 0 ? 256 : i) << 9; + fsg->data_size_from_cmnd = (i == 0 ? 256 : i) << fsg->curlun->blkbits; if ((reply = check_command(fsg, 6, DATA_DIR_TO_HOST, (7<<1) | (1<<4), 1, "READ(6)")) == 0) @@ -2424,7 +2433,7 @@ static int do_scsi_command(struct fsg_dev *fsg) case READ_10: fsg->data_size_from_cmnd = - get_unaligned_be16(&fsg->cmnd[7]) << 9; + get_unaligned_be16(&fsg->cmnd[7]) << fsg->curlun->blkbits; if ((reply = check_command(fsg, 10, DATA_DIR_TO_HOST, (1<<1) | (0xf<<2) | (3<<7), 1, "READ(10)")) == 0) @@ -2433,7 +2442,7 @@ static int do_scsi_command(struct fsg_dev *fsg) case READ_12: fsg->data_size_from_cmnd = - get_unaligned_be32(&fsg->cmnd[6]) << 9; + get_unaligned_be32(&fsg->cmnd[6]) << fsg->curlun->blkbits; if ((reply = check_command(fsg, 12, DATA_DIR_TO_HOST, (1<<1) | (0xf<<2) | (0xf<<6), 1, "READ(12)")) == 0) @@ -2519,7 +2528,7 @@ static int do_scsi_command(struct fsg_dev *fsg) case WRITE_6: i = fsg->cmnd[4]; - fsg->data_size_from_cmnd = (i == 0 ? 256 : i) << 9; + fsg->data_size_from_cmnd = (i == 0 ? 256 : i) << fsg->curlun->blkbits; if ((reply = check_command(fsg, 6, DATA_DIR_FROM_HOST, (7<<1) | (1<<4), 1, "WRITE(6)")) == 0) @@ -2528,7 +2537,7 @@ static int do_scsi_command(struct fsg_dev *fsg) case WRITE_10: fsg->data_size_from_cmnd = - get_unaligned_be16(&fsg->cmnd[7]) << 9; + get_unaligned_be16(&fsg->cmnd[7]) << fsg->curlun->blkbits; if ((reply = check_command(fsg, 10, DATA_DIR_FROM_HOST, (1<<1) | (0xf<<2) | (3<<7), 1, "WRITE(10)")) == 0) @@ -2537,7 +2546,7 @@ static int do_scsi_command(struct fsg_dev *fsg) case WRITE_12: fsg->data_size_from_cmnd = - get_unaligned_be32(&fsg->cmnd[6]) << 9; + get_unaligned_be32(&fsg->cmnd[6]) << fsg->curlun->blkbits; if ((reply = check_command(fsg, 12, DATA_DIR_FROM_HOST, (1<<1) | (0xf<<2) | (0xf<<6), 1, "WRITE(12)")) == 0) @@ -2666,7 +2675,6 @@ static int get_next_command(struct fsg_dev *fsg) /* Queue a request to read a Bulk-only CBW */ set_bulk_out_req_length(fsg, bh, USB_BULK_CB_WRAP_LEN); - bh->outreq->short_not_ok = 1; start_transfer(fsg, fsg->bulk_out, bh->outreq, &bh->outreq_busy, &bh->state); @@ -2752,7 +2760,7 @@ static int do_set_interface(struct fsg_dev *fsg, int altsetting) reset: /* Deallocate the requests */ - for (i = 0; i < FSG_NUM_BUFFERS; ++i) { + for (i = 0; i < fsg_num_buffers; ++i) { struct fsg_buffhd *bh = &fsg->buffhds[i]; if (bh->inreq) { @@ -2791,29 +2799,32 @@ reset: /* Enable the endpoints */ d = fsg_ep_desc(fsg->gadget, - &fsg_fs_bulk_in_desc, &fsg_hs_bulk_in_desc); + &fsg_fs_bulk_in_desc, &fsg_hs_bulk_in_desc, + &fsg_ss_bulk_in_desc); if ((rc = enable_endpoint(fsg, fsg->bulk_in, d)) != 0) goto reset; fsg->bulk_in_enabled = 1; d = fsg_ep_desc(fsg->gadget, - &fsg_fs_bulk_out_desc, &fsg_hs_bulk_out_desc); + &fsg_fs_bulk_out_desc, &fsg_hs_bulk_out_desc, + &fsg_ss_bulk_out_desc); if ((rc = enable_endpoint(fsg, fsg->bulk_out, d)) != 0) goto reset; fsg->bulk_out_enabled = 1; - fsg->bulk_out_maxpacket = le16_to_cpu(d->wMaxPacketSize); + fsg->bulk_out_maxpacket = usb_endpoint_maxp(d); clear_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags); if (transport_is_cbi()) { d = fsg_ep_desc(fsg->gadget, - &fsg_fs_intr_in_desc, &fsg_hs_intr_in_desc); + &fsg_fs_intr_in_desc, &fsg_hs_intr_in_desc, + &fsg_ss_intr_in_desc); if ((rc = enable_endpoint(fsg, fsg->intr_in, d)) != 0) goto reset; fsg->intr_in_enabled = 1; } /* Allocate the requests */ - for (i = 0; i < FSG_NUM_BUFFERS; ++i) { + for (i = 0; i < fsg_num_buffers; ++i) { struct fsg_buffhd *bh = &fsg->buffhds[i]; if ((rc = alloc_request(fsg, fsg->bulk_in, &bh->inreq)) != 0) @@ -2862,17 +2873,10 @@ static int do_set_config(struct fsg_dev *fsg, u8 new_config) fsg->config = new_config; if ((rc = do_set_interface(fsg, 0)) != 0) fsg->config = 0; // Reset on errors - else { - char *speed; - - switch (fsg->gadget->speed) { - case USB_SPEED_LOW: speed = "low"; break; - case USB_SPEED_FULL: speed = "full"; break; - case USB_SPEED_HIGH: speed = "high"; break; - default: speed = "?"; break; - } - INFO(fsg, "%s speed config #%d\n", speed, fsg->config); - } + else + INFO(fsg, "%s config #%d\n", + usb_speed_string(fsg->gadget->speed), + fsg->config); } return rc; } @@ -2909,7 +2913,7 @@ static void handle_exception(struct fsg_dev *fsg) /* Cancel all the pending transfers */ if (fsg->intreq_busy) usb_ep_dequeue(fsg->intr_in, fsg->intreq); - for (i = 0; i < FSG_NUM_BUFFERS; ++i) { + for (i = 0; i < fsg_num_buffers; ++i) { bh = &fsg->buffhds[i]; if (bh->inreq_busy) usb_ep_dequeue(fsg->bulk_in, bh->inreq); @@ -2920,7 +2924,7 @@ static void handle_exception(struct fsg_dev *fsg) /* Wait until everything is idle */ for (;;) { num_active = fsg->intreq_busy; - for (i = 0; i < FSG_NUM_BUFFERS; ++i) { + for (i = 0; i < fsg_num_buffers; ++i) { bh = &fsg->buffhds[i]; num_active += bh->inreq_busy + bh->outreq_busy; } @@ -2942,7 +2946,7 @@ static void handle_exception(struct fsg_dev *fsg) * state, and the exception. Then invoke the handler. */ spin_lock_irq(&fsg->lock); - for (i = 0; i < FSG_NUM_BUFFERS; ++i) { + for (i = 0; i < fsg_num_buffers; ++i) { bh = &fsg->buffhds[i]; bh->state = BUF_STATE_EMPTY; } @@ -3149,6 +3153,15 @@ static void /* __init_or_exit */ fsg_unbind(struct usb_gadget *gadget) DBG(fsg, "unbind\n"); clear_bit(REGISTERED, &fsg->atomic_bitflags); + /* If the thread isn't already dead, tell it to exit now */ + if (fsg->state != FSG_STATE_TERMINATED) { + raise_exception(fsg, FSG_STATE_EXIT); + wait_for_completion(&fsg->thread_notifier); + + /* The cleanup routine waits for this completion also */ + complete(&fsg->thread_notifier); + } + /* Unregister the sysfs attribute files and the LUNs */ for (i = 0; i < fsg->nluns; ++i) { curlun = &fsg->luns[i]; @@ -3162,17 +3175,8 @@ static void /* __init_or_exit */ fsg_unbind(struct usb_gadget *gadget) } } - /* If the thread isn't already dead, tell it to exit now */ - if (fsg->state != FSG_STATE_TERMINATED) { - raise_exception(fsg, FSG_STATE_EXIT); - wait_for_completion(&fsg->thread_notifier); - - /* The cleanup routine waits for this completion also */ - complete(&fsg->thread_notifier); - } - /* Free the data buffers */ - for (i = 0; i < FSG_NUM_BUFFERS; ++i) + for (i = 0; i < fsg_num_buffers; ++i) kfree(fsg->buffhds[i].buf); /* Free the request and buffer for endpoint 0 */ @@ -3445,6 +3449,24 @@ static int __init fsg_bind(struct usb_gadget *gadget) fsg_fs_intr_in_desc.bEndpointAddress; } + if (gadget_is_superspeed(gadget)) { + unsigned max_burst; + + fsg_ss_function[i + FSG_SS_FUNCTION_PRE_EP_ENTRIES] = NULL; + + /* Calculate bMaxBurst, we know packet size is 1024 */ + max_burst = min_t(unsigned, mod_data.buflen / 1024, 15); + + /* Assume endpoint addresses are the same for both speeds */ + fsg_ss_bulk_in_desc.bEndpointAddress = + fsg_fs_bulk_in_desc.bEndpointAddress; + fsg_ss_bulk_in_comp_desc.bMaxBurst = max_burst; + + fsg_ss_bulk_out_desc.bEndpointAddress = + fsg_fs_bulk_out_desc.bEndpointAddress; + fsg_ss_bulk_out_comp_desc.bMaxBurst = max_burst; + } + if (gadget_is_otg(gadget)) fsg_otg_desc.bmAttributes |= USB_OTG_HNP; @@ -3460,7 +3482,7 @@ static int __init fsg_bind(struct usb_gadget *gadget) req->complete = ep0_complete; /* Allocate the data buffers */ - for (i = 0; i < FSG_NUM_BUFFERS; ++i) { + for (i = 0; i < fsg_num_buffers; ++i) { struct fsg_buffhd *bh = &fsg->buffhds[i]; /* Allocate for the bulk-in endpoint. We assume that @@ -3471,7 +3493,7 @@ static int __init fsg_bind(struct usb_gadget *gadget) goto out; bh->next = bh + 1; } - fsg->buffhds[FSG_NUM_BUFFERS - 1].next = &fsg->buffhds[0]; + fsg->buffhds[fsg_num_buffers - 1].next = &fsg->buffhds[0]; /* This should reflect the actual gadget power source */ usb_gadget_set_selfpowered(gadget); @@ -3561,11 +3583,7 @@ static void fsg_resume(struct usb_gadget *gadget) /*-------------------------------------------------------------------------*/ static struct usb_gadget_driver fsg_driver = { -#ifdef CONFIG_USB_GADGET_DUALSPEED - .speed = USB_SPEED_HIGH, -#else - .speed = USB_SPEED_FULL, -#endif + .speed = USB_SPEED_SUPER, .function = (char *) fsg_string_product, .unbind = fsg_unbind, .disconnect = fsg_disconnect, @@ -3587,7 +3605,9 @@ static int __init fsg_alloc(void) { struct fsg_dev *fsg; - fsg = kzalloc(sizeof *fsg, GFP_KERNEL); + fsg = kzalloc(sizeof *fsg + + fsg_num_buffers * sizeof *(fsg->buffhds), GFP_KERNEL); + if (!fsg) return -ENOMEM; spin_lock_init(&fsg->lock); @@ -3605,6 +3625,10 @@ static int __init fsg_init(void) int rc; struct fsg_dev *fsg; + rc = fsg_num_buffers_validate(); + if (rc != 0) + return rc; + if ((rc = fsg_alloc()) != 0) return rc; fsg = the_fsg; diff --git a/drivers/usb/gadget/fsl_qe_udc.c b/drivers/usb/gadget/fsl_qe_udc.c index 3bf872e1ad39..2a03e4de11c1 100644 --- a/drivers/usb/gadget/fsl_qe_udc.c +++ b/drivers/usb/gadget/fsl_qe_udc.c @@ -540,7 +540,7 @@ static int qe_ep_init(struct qe_udc *udc, int reval = 0; u16 max = 0; - max = le16_to_cpu(desc->wMaxPacketSize); + max = usb_endpoint_maxp(desc); /* check the max package size validate for this endpoint */ /* Refer to USB2.0 spec table 9-13, diff --git a/drivers/usb/gadget/fsl_udc_core.c b/drivers/usb/gadget/fsl_udc_core.c index de24a4233c25..b2c44e1d5813 100644 --- a/drivers/usb/gadget/fsl_udc_core.c +++ b/drivers/usb/gadget/fsl_udc_core.c @@ -559,7 +559,7 @@ static int fsl_ep_enable(struct usb_ep *_ep, if (!udc->driver || (udc->gadget.speed == USB_SPEED_UNKNOWN)) return -ESHUTDOWN; - max = le16_to_cpu(desc->wMaxPacketSize); + max = usb_endpoint_maxp(desc); /* Disable automatic zlp generation. Driver is responsible to indicate * explicitly through req->req.zero. This is needed to enable multi-td @@ -1715,34 +1715,31 @@ static void dtd_complete_irq(struct fsl_udc *udc) } } +static inline enum usb_device_speed portscx_device_speed(u32 reg) +{ + switch (speed & PORTSCX_PORT_SPEED_MASK) { + case PORTSCX_PORT_SPEED_HIGH: + return USB_SPEED_HIGH; + case PORTSCX_PORT_SPEED_FULL: + return USB_SPEED_FULL; + case PORTSCX_PORT_SPEED_LOW: + return USB_SPEED_LOW; + default: + return USB_SPEED_UNKNOWN; + } +} + /* Process a port change interrupt */ static void port_change_irq(struct fsl_udc *udc) { - u32 speed; - if (udc->bus_reset) udc->bus_reset = 0; /* Bus resetting is finished */ - if (!(fsl_readl(&dr_regs->portsc1) & PORTSCX_PORT_RESET)) { + if (!(fsl_readl(&dr_regs->portsc1) & PORTSCX_PORT_RESET)) /* Get the speed */ - speed = (fsl_readl(&dr_regs->portsc1) - & PORTSCX_PORT_SPEED_MASK); - switch (speed) { - case PORTSCX_PORT_SPEED_HIGH: - udc->gadget.speed = USB_SPEED_HIGH; - break; - case PORTSCX_PORT_SPEED_FULL: - udc->gadget.speed = USB_SPEED_FULL; - break; - case PORTSCX_PORT_SPEED_LOW: - udc->gadget.speed = USB_SPEED_LOW; - break; - default: - udc->gadget.speed = USB_SPEED_UNKNOWN; - break; - } - } + udc->gadget.speed = + portscx_device_speed(fsl_readl(&dr_regs->portsc1)); /* Update USB state */ if (!udc->resume_state) @@ -2167,20 +2164,8 @@ static int fsl_proc_read(char *page, char **start, off_t off, int count, default: s = "None"; break; } - s;} ), ( { - char *s; - switch (tmp_reg & PORTSCX_PORT_SPEED_UNDEF) { - case PORTSCX_PORT_SPEED_FULL: - s = "Full Speed"; break; - case PORTSCX_PORT_SPEED_LOW: - s = "Low Speed"; break; - case PORTSCX_PORT_SPEED_HIGH: - s = "High Speed"; break; - default: - s = "Undefined"; break; - } - s; - } ), + s;} ), + usb_speed_string(portscx_device_speed(tmp_reg)), (tmp_reg & PORTSCX_PHY_LOW_POWER_SPD) ? "Normal PHY mode" : "Low power mode", (tmp_reg & PORTSCX_PORT_RESET) ? "In Reset" : diff --git a/drivers/usb/gadget/fusb300_udc.c b/drivers/usb/gadget/fusb300_udc.c index 4ec888f90002..e593f2849fa9 100644 --- a/drivers/usb/gadget/fusb300_udc.c +++ b/drivers/usb/gadget/fusb300_udc.c @@ -8,16 +8,6 @@ * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - * */ #include <linux/dma-mapping.h> #include <linux/err.h> @@ -220,7 +210,7 @@ static int config_ep(struct fusb300_ep *ep, info.type = desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK; info.dir_in = (desc->bEndpointAddress & USB_ENDPOINT_DIR_MASK) ? 1 : 0; - info.maxpacket = le16_to_cpu(desc->wMaxPacketSize); + info.maxpacket = usb_endpoint_maxp(desc); info.epnum = desc->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK; if ((info.type == USB_ENDPOINT_XFER_INT) || @@ -1479,7 +1469,7 @@ static int __init fusb300_probe(struct platform_device *pdev) fusb300->gadget.name = udc_name; fusb300->reg = reg; - ret = request_irq(ires->start, fusb300_irq, IRQF_DISABLED | IRQF_SHARED, + ret = request_irq(ires->start, fusb300_irq, IRQF_SHARED, udc_name, fusb300); if (ret < 0) { pr_err("request_irq error (%d)\n", ret); @@ -1487,7 +1477,7 @@ static int __init fusb300_probe(struct platform_device *pdev) } ret = request_irq(ires1->start, fusb300_irq, - IRQF_DISABLED | IRQF_SHARED, udc_name, fusb300); + IRQF_SHARED, udc_name, fusb300); if (ret < 0) { pr_err("request_irq1 error (%d)\n", ret); goto clean_up; diff --git a/drivers/usb/gadget/fusb300_udc.h b/drivers/usb/gadget/fusb300_udc.h index f51aa2ef1f90..92745bd03064 100644 --- a/drivers/usb/gadget/fusb300_udc.h +++ b/drivers/usb/gadget/fusb300_udc.h @@ -8,16 +8,6 @@ * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - * */ diff --git a/drivers/usb/gadget/g_ffs.c b/drivers/usb/gadget/g_ffs.c index 704c2800ac00..0519d77915ec 100644 --- a/drivers/usb/gadget/g_ffs.c +++ b/drivers/usb/gadget/g_ffs.c @@ -8,15 +8,6 @@ * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #define pr_fmt(fmt) "g_ffs: " fmt diff --git a/drivers/usb/gadget/gadget_chips.h b/drivers/usb/gadget/gadget_chips.h index f3a83cd0ef50..a8855d0b7f3b 100644 --- a/drivers/usb/gadget/gadget_chips.h +++ b/drivers/usb/gadget/gadget_chips.h @@ -31,6 +31,7 @@ #define gadget_is_ci13xxx_msm(g) (!strcmp("ci13xxx_msm", (g)->name)) #define gadget_is_ci13xxx_pci(g) (!strcmp("ci13xxx_pci", (g)->name)) #define gadget_is_dummy(g) (!strcmp("dummy_udc", (g)->name)) +#define gadget_is_dwc3(g) (!strcmp("dwc3-gadget", (g)->name)) #define gadget_is_fsl_qe(g) (!strcmp("fsl_qe_udc", (g)->name)) #define gadget_is_fsl_usb2(g) (!strcmp("fsl-usb2-udc", (g)->name)) #define gadget_is_goku(g) (!strcmp("goku_udc", (g)->name)) @@ -115,6 +116,8 @@ static inline int usb_gadget_controller_number(struct usb_gadget *gadget) return 0x30; else if (gadget_is_net2272(gadget)) return 0x31; + else if (gadget_is_dwc3(gadget)) + return 0x32; return -ENOENT; } diff --git a/drivers/usb/gadget/gmidi.c b/drivers/usb/gadget/gmidi.c index 8b9220e128a7..8fcde37aa6d4 100644 --- a/drivers/usb/gadget/gmidi.c +++ b/drivers/usb/gadget/gmidi.c @@ -36,134 +36,43 @@ #include "gadget_chips.h" - -/* - * Kbuild is not very cooperative with respect to linking separately - * compiled library objects into one module. So for now we won't use - * separate compilation ... ensuring init/exit sections work to shrink - * the runtime footprint, and giving us at least some parts of what - * a "gcc --combine ... part1.c part2.c part3.c ... " build would. - */ +#include "composite.c" #include "usbstring.c" #include "config.c" #include "epautoconf.c" +#include "f_midi.c" /*-------------------------------------------------------------------------*/ - MODULE_AUTHOR("Ben Williamson"); MODULE_LICENSE("GPL v2"); -#define DRIVER_VERSION "25 Jul 2006" - static const char shortname[] = "g_midi"; static const char longname[] = "MIDI Gadget"; static int index = SNDRV_DEFAULT_IDX1; -static char *id = SNDRV_DEFAULT_STR1; - -module_param(index, int, 0444); +module_param(index, int, S_IRUGO); MODULE_PARM_DESC(index, "Index value for the USB MIDI Gadget adapter."); -module_param(id, charp, 0444); -MODULE_PARM_DESC(id, "ID string for the USB MIDI Gadget adapter."); - -/* Some systems will want different product identifiers published in the - * device descriptor, either numbers or strings or both. These string - * parameters are in UTF-8 (superset of ASCII's 7 bit characters). - */ - -static ushort idVendor; -module_param(idVendor, ushort, S_IRUGO); -MODULE_PARM_DESC(idVendor, "USB Vendor ID"); - -static ushort idProduct; -module_param(idProduct, ushort, S_IRUGO); -MODULE_PARM_DESC(idProduct, "USB Product ID"); - -static ushort bcdDevice; -module_param(bcdDevice, ushort, S_IRUGO); -MODULE_PARM_DESC(bcdDevice, "USB Device version (BCD)"); - -static char *iManufacturer; -module_param(iManufacturer, charp, S_IRUGO); -MODULE_PARM_DESC(iManufacturer, "USB Manufacturer string"); - -static char *iProduct; -module_param(iProduct, charp, S_IRUGO); -MODULE_PARM_DESC(iProduct, "USB Product string"); - -static char *iSerialNumber; -module_param(iSerialNumber, charp, S_IRUGO); -MODULE_PARM_DESC(iSerialNumber, "SerialNumber"); - -/* - * this version autoconfigures as much as possible, - * which is reasonable for most "bulk-only" drivers. - */ -static const char *EP_IN_NAME; -static const char *EP_OUT_NAME; +static char *id = SNDRV_DEFAULT_STR1; +module_param(id, charp, S_IRUGO); +MODULE_PARM_DESC(id, "ID string for the USB MIDI Gadget adapter."); -/* big enough to hold our biggest descriptor */ -#define USB_BUFSIZ 256 - - -/* This is a gadget, and the IN/OUT naming is from the host's perspective. - USB -> OUT endpoint -> rawmidi - USB <- IN endpoint <- rawmidi */ -struct gmidi_in_port { - struct gmidi_device* dev; - int active; - uint8_t cable; /* cable number << 4 */ - uint8_t state; -#define STATE_UNKNOWN 0 -#define STATE_1PARAM 1 -#define STATE_2PARAM_1 2 -#define STATE_2PARAM_2 3 -#define STATE_SYSEX_0 4 -#define STATE_SYSEX_1 5 -#define STATE_SYSEX_2 6 - uint8_t data[2]; -}; - -struct gmidi_device { - spinlock_t lock; - struct usb_gadget *gadget; - struct usb_request *req; /* for control responses */ - u8 config; - struct usb_ep *in_ep, *out_ep; - struct snd_card *card; - struct snd_rawmidi *rmidi; - struct snd_rawmidi_substream *in_substream; - struct snd_rawmidi_substream *out_substream; - - /* For the moment we only support one port in - each direction, but in_port is kept as a - separate struct so we can have more later. */ - struct gmidi_in_port in_port; - unsigned long out_triggered; - struct tasklet_struct tasklet; -}; - -static void gmidi_transmit(struct gmidi_device* dev, struct usb_request* req); - - -#define DBG(d, fmt, args...) \ - dev_dbg(&(d)->gadget->dev , fmt , ## args) -#define VDBG(d, fmt, args...) \ - dev_vdbg(&(d)->gadget->dev , fmt , ## args) -#define ERROR(d, fmt, args...) \ - dev_err(&(d)->gadget->dev , fmt , ## args) -#define INFO(d, fmt, args...) \ - dev_info(&(d)->gadget->dev , fmt , ## args) - - -static unsigned buflen = 256; -static unsigned qlen = 32; - +static unsigned int buflen = 256; module_param(buflen, uint, S_IRUGO); +MODULE_PARM_DESC(buflen, "MIDI buffer length"); + +static unsigned int qlen = 32; module_param(qlen, uint, S_IRUGO); +MODULE_PARM_DESC(qlen, "USB read request queue length"); +static unsigned int in_ports = 1; +module_param(in_ports, uint, S_IRUGO); +MODULE_PARM_DESC(in_ports, "Number of MIDI input ports"); + +static unsigned int out_ports = 1; +module_param(out_ports, uint, S_IRUGO); +MODULE_PARM_DESC(out_ports, "Number of MIDI output ports"); /* Thanks to Grey Innovation for donating this product ID. * @@ -173,1149 +82,124 @@ module_param(qlen, uint, S_IRUGO); #define DRIVER_VENDOR_NUM 0x17b3 /* Grey Innovation */ #define DRIVER_PRODUCT_NUM 0x0004 /* Linux-USB "MIDI Gadget" */ +/* string IDs are assigned dynamically */ -/* - * DESCRIPTORS ... most are static, but strings and (full) - * configuration descriptors are built on demand. - */ - -#define STRING_MANUFACTURER 25 -#define STRING_PRODUCT 42 -#define STRING_SERIAL 101 -#define STRING_MIDI_GADGET 250 +#define STRING_MANUFACTURER_IDX 0 +#define STRING_PRODUCT_IDX 1 +#define STRING_DESCRIPTION_IDX 2 -/* We only have the one configuration, it's number 1. */ -#define GMIDI_CONFIG 1 - -/* We have two interfaces- AudioControl and MIDIStreaming */ -#define GMIDI_AC_INTERFACE 0 -#define GMIDI_MS_INTERFACE 1 -#define GMIDI_NUM_INTERFACES 2 - -DECLARE_UAC_AC_HEADER_DESCRIPTOR(1); -DECLARE_USB_MIDI_OUT_JACK_DESCRIPTOR(1); -DECLARE_USB_MS_ENDPOINT_DESCRIPTOR(1); - -/* B.1 Device Descriptor */ static struct usb_device_descriptor device_desc = { .bLength = USB_DT_DEVICE_SIZE, .bDescriptorType = USB_DT_DEVICE, - .bcdUSB = cpu_to_le16(0x0200), + .bcdUSB = __constant_cpu_to_le16(0x0200), .bDeviceClass = USB_CLASS_PER_INTERFACE, - .idVendor = cpu_to_le16(DRIVER_VENDOR_NUM), - .idProduct = cpu_to_le16(DRIVER_PRODUCT_NUM), - .iManufacturer = STRING_MANUFACTURER, - .iProduct = STRING_PRODUCT, + .idVendor = __constant_cpu_to_le16(DRIVER_VENDOR_NUM), + .idProduct = __constant_cpu_to_le16(DRIVER_PRODUCT_NUM), + /* .iManufacturer = DYNAMIC */ + /* .iProduct = DYNAMIC */ .bNumConfigurations = 1, }; -/* B.2 Configuration Descriptor */ -static struct usb_config_descriptor config_desc = { - .bLength = USB_DT_CONFIG_SIZE, - .bDescriptorType = USB_DT_CONFIG, - /* compute wTotalLength on the fly */ - .bNumInterfaces = GMIDI_NUM_INTERFACES, - .bConfigurationValue = GMIDI_CONFIG, - .iConfiguration = STRING_MIDI_GADGET, - /* - * FIXME: When embedding this driver in a device, - * these need to be set to reflect the actual - * power properties of the device. Is it selfpowered? - */ - .bmAttributes = USB_CONFIG_ATT_ONE, - .bMaxPower = CONFIG_USB_GADGET_VBUS_DRAW / 2, -}; - -/* B.3.1 Standard AC Interface Descriptor */ -static const struct usb_interface_descriptor ac_interface_desc = { - .bLength = USB_DT_INTERFACE_SIZE, - .bDescriptorType = USB_DT_INTERFACE, - .bInterfaceNumber = GMIDI_AC_INTERFACE, - .bNumEndpoints = 0, - .bInterfaceClass = USB_CLASS_AUDIO, - .bInterfaceSubClass = USB_SUBCLASS_AUDIOCONTROL, - .iInterface = STRING_MIDI_GADGET, -}; - -/* B.3.2 Class-Specific AC Interface Descriptor */ -static const struct uac1_ac_header_descriptor_1 ac_header_desc = { - .bLength = UAC_DT_AC_HEADER_SIZE(1), - .bDescriptorType = USB_DT_CS_INTERFACE, - .bDescriptorSubtype = USB_MS_HEADER, - .bcdADC = cpu_to_le16(0x0100), - .wTotalLength = cpu_to_le16(UAC_DT_AC_HEADER_SIZE(1)), - .bInCollection = 1, - .baInterfaceNr = { - [0] = GMIDI_MS_INTERFACE, - } -}; - -/* B.4.1 Standard MS Interface Descriptor */ -static const struct usb_interface_descriptor ms_interface_desc = { - .bLength = USB_DT_INTERFACE_SIZE, - .bDescriptorType = USB_DT_INTERFACE, - .bInterfaceNumber = GMIDI_MS_INTERFACE, - .bNumEndpoints = 2, - .bInterfaceClass = USB_CLASS_AUDIO, - .bInterfaceSubClass = USB_SUBCLASS_MIDISTREAMING, - .iInterface = STRING_MIDI_GADGET, +static struct usb_string strings_dev[] = { + [STRING_MANUFACTURER_IDX].s = "Grey Innovation", + [STRING_PRODUCT_IDX].s = "MIDI Gadget", + [STRING_DESCRIPTION_IDX].s = "MIDI", + { } /* end of list */ }; -/* B.4.2 Class-Specific MS Interface Descriptor */ -static const struct usb_ms_header_descriptor ms_header_desc = { - .bLength = USB_DT_MS_HEADER_SIZE, - .bDescriptorType = USB_DT_CS_INTERFACE, - .bDescriptorSubtype = USB_MS_HEADER, - .bcdMSC = cpu_to_le16(0x0100), - .wTotalLength = cpu_to_le16(USB_DT_MS_HEADER_SIZE - + 2*USB_DT_MIDI_IN_SIZE - + 2*USB_DT_MIDI_OUT_SIZE(1)), -}; - -#define JACK_IN_EMB 1 -#define JACK_IN_EXT 2 -#define JACK_OUT_EMB 3 -#define JACK_OUT_EXT 4 - -/* B.4.3 MIDI IN Jack Descriptors */ -static const struct usb_midi_in_jack_descriptor jack_in_emb_desc = { - .bLength = USB_DT_MIDI_IN_SIZE, - .bDescriptorType = USB_DT_CS_INTERFACE, - .bDescriptorSubtype = USB_MS_MIDI_IN_JACK, - .bJackType = USB_MS_EMBEDDED, - .bJackID = JACK_IN_EMB, -}; - -static const struct usb_midi_in_jack_descriptor jack_in_ext_desc = { - .bLength = USB_DT_MIDI_IN_SIZE, - .bDescriptorType = USB_DT_CS_INTERFACE, - .bDescriptorSubtype = USB_MS_MIDI_IN_JACK, - .bJackType = USB_MS_EXTERNAL, - .bJackID = JACK_IN_EXT, -}; - -/* B.4.4 MIDI OUT Jack Descriptors */ -static const struct usb_midi_out_jack_descriptor_1 jack_out_emb_desc = { - .bLength = USB_DT_MIDI_OUT_SIZE(1), - .bDescriptorType = USB_DT_CS_INTERFACE, - .bDescriptorSubtype = USB_MS_MIDI_OUT_JACK, - .bJackType = USB_MS_EMBEDDED, - .bJackID = JACK_OUT_EMB, - .bNrInputPins = 1, - .pins = { - [0] = { - .baSourceID = JACK_IN_EXT, - .baSourcePin = 1, - } - } -}; - -static const struct usb_midi_out_jack_descriptor_1 jack_out_ext_desc = { - .bLength = USB_DT_MIDI_OUT_SIZE(1), - .bDescriptorType = USB_DT_CS_INTERFACE, - .bDescriptorSubtype = USB_MS_MIDI_OUT_JACK, - .bJackType = USB_MS_EXTERNAL, - .bJackID = JACK_OUT_EXT, - .bNrInputPins = 1, - .pins = { - [0] = { - .baSourceID = JACK_IN_EMB, - .baSourcePin = 1, - } - } -}; - -/* B.5.1 Standard Bulk OUT Endpoint Descriptor */ -static struct usb_endpoint_descriptor bulk_out_desc = { - .bLength = USB_DT_ENDPOINT_AUDIO_SIZE, - .bDescriptorType = USB_DT_ENDPOINT, - .bEndpointAddress = USB_DIR_OUT, - .bmAttributes = USB_ENDPOINT_XFER_BULK, -}; - -/* B.5.2 Class-specific MS Bulk OUT Endpoint Descriptor */ -static const struct usb_ms_endpoint_descriptor_1 ms_out_desc = { - .bLength = USB_DT_MS_ENDPOINT_SIZE(1), - .bDescriptorType = USB_DT_CS_ENDPOINT, - .bDescriptorSubtype = USB_MS_GENERAL, - .bNumEmbMIDIJack = 1, - .baAssocJackID = { - [0] = JACK_IN_EMB, - } -}; - -/* B.6.1 Standard Bulk IN Endpoint Descriptor */ -static struct usb_endpoint_descriptor bulk_in_desc = { - .bLength = USB_DT_ENDPOINT_AUDIO_SIZE, - .bDescriptorType = USB_DT_ENDPOINT, - .bEndpointAddress = USB_DIR_IN, - .bmAttributes = USB_ENDPOINT_XFER_BULK, -}; - -/* B.6.2 Class-specific MS Bulk IN Endpoint Descriptor */ -static const struct usb_ms_endpoint_descriptor_1 ms_in_desc = { - .bLength = USB_DT_MS_ENDPOINT_SIZE(1), - .bDescriptorType = USB_DT_CS_ENDPOINT, - .bDescriptorSubtype = USB_MS_GENERAL, - .bNumEmbMIDIJack = 1, - .baAssocJackID = { - [0] = JACK_OUT_EMB, - } -}; - -static const struct usb_descriptor_header *gmidi_function [] = { - (struct usb_descriptor_header *)&ac_interface_desc, - (struct usb_descriptor_header *)&ac_header_desc, - (struct usb_descriptor_header *)&ms_interface_desc, - - (struct usb_descriptor_header *)&ms_header_desc, - (struct usb_descriptor_header *)&jack_in_emb_desc, - (struct usb_descriptor_header *)&jack_in_ext_desc, - (struct usb_descriptor_header *)&jack_out_emb_desc, - (struct usb_descriptor_header *)&jack_out_ext_desc, - /* If you add more jacks, update ms_header_desc.wTotalLength */ - - (struct usb_descriptor_header *)&bulk_out_desc, - (struct usb_descriptor_header *)&ms_out_desc, - (struct usb_descriptor_header *)&bulk_in_desc, - (struct usb_descriptor_header *)&ms_in_desc, - NULL, -}; - -static char manufacturer[50]; -static char product_desc[40] = "MIDI Gadget"; -static char serial_number[20]; - -/* static strings, in UTF-8 */ -static struct usb_string strings [] = { - { STRING_MANUFACTURER, manufacturer, }, - { STRING_PRODUCT, product_desc, }, - { STRING_SERIAL, serial_number, }, - { STRING_MIDI_GADGET, longname, }, - { } /* end of list */ -}; - -static struct usb_gadget_strings stringtab = { +static struct usb_gadget_strings stringtab_dev = { .language = 0x0409, /* en-us */ - .strings = strings, + .strings = strings_dev, }; -static int config_buf(struct usb_gadget *gadget, - u8 *buf, u8 type, unsigned index) -{ - int len; - - /* only one configuration */ - if (index != 0) { - return -EINVAL; - } - len = usb_gadget_config_buf(&config_desc, - buf, USB_BUFSIZ, gmidi_function); - if (len < 0) { - return len; - } - ((struct usb_config_descriptor *)buf)->bDescriptorType = type; - return len; -} - -static struct usb_request *alloc_ep_req(struct usb_ep *ep, unsigned length) -{ - struct usb_request *req; - - req = usb_ep_alloc_request(ep, GFP_ATOMIC); - if (req) { - req->length = length; - req->buf = kmalloc(length, GFP_ATOMIC); - if (!req->buf) { - usb_ep_free_request(ep, req); - req = NULL; - } - } - return req; -} - -static void free_ep_req(struct usb_ep *ep, struct usb_request *req) -{ - kfree(req->buf); - usb_ep_free_request(ep, req); -} - -static const uint8_t gmidi_cin_length[] = { - 0, 0, 2, 3, 3, 1, 2, 3, 3, 3, 3, 3, 2, 2, 3, 1 +static struct usb_gadget_strings *dev_strings[] = { + &stringtab_dev, + NULL, }; -/* - * Receives a chunk of MIDI data. - */ -static void gmidi_read_data(struct usb_ep *ep, int cable, - uint8_t *data, int length) -{ - struct gmidi_device *dev = ep->driver_data; - /* cable is ignored, because for now we only have one. */ - - if (!dev->out_substream) { - /* Nobody is listening - throw it on the floor. */ - return; - } - if (!test_bit(dev->out_substream->number, &dev->out_triggered)) { - return; - } - snd_rawmidi_receive(dev->out_substream, data, length); -} - -static void gmidi_handle_out_data(struct usb_ep *ep, struct usb_request *req) -{ - unsigned i; - u8 *buf = req->buf; - - for (i = 0; i + 3 < req->actual; i += 4) { - if (buf[i] != 0) { - int cable = buf[i] >> 4; - int length = gmidi_cin_length[buf[i] & 0x0f]; - gmidi_read_data(ep, cable, &buf[i + 1], length); - } - } -} - -static void gmidi_complete(struct usb_ep *ep, struct usb_request *req) -{ - struct gmidi_device *dev = ep->driver_data; - int status = req->status; - - switch (status) { - case 0: /* normal completion */ - if (ep == dev->out_ep) { - /* we received stuff. - req is queued again, below */ - gmidi_handle_out_data(ep, req); - } else if (ep == dev->in_ep) { - /* our transmit completed. - see if there's more to go. - gmidi_transmit eats req, don't queue it again. */ - gmidi_transmit(dev, req); - return; - } - break; - - /* this endpoint is normally active while we're configured */ - case -ECONNABORTED: /* hardware forced ep reset */ - case -ECONNRESET: /* request dequeued */ - case -ESHUTDOWN: /* disconnect from host */ - VDBG(dev, "%s gone (%d), %d/%d\n", ep->name, status, - req->actual, req->length); - if (ep == dev->out_ep) { - gmidi_handle_out_data(ep, req); - } - free_ep_req(ep, req); - return; - - case -EOVERFLOW: /* buffer overrun on read means that - * we didn't provide a big enough - * buffer. - */ - default: - DBG(dev, "%s complete --> %d, %d/%d\n", ep->name, - status, req->actual, req->length); - break; - case -EREMOTEIO: /* short read */ - break; - } - - status = usb_ep_queue(ep, req, GFP_ATOMIC); - if (status) { - ERROR(dev, "kill %s: resubmit %d bytes --> %d\n", - ep->name, req->length, status); - usb_ep_set_halt(ep); - /* FIXME recover later ... somehow */ - } -} - -static int set_gmidi_config(struct gmidi_device *dev, gfp_t gfp_flags) -{ - int err = 0; - struct usb_request *req; - struct usb_ep *ep; - unsigned i; - - dev->in_ep->desc = &bulk_in_desc; - err = usb_ep_enable(dev->in_ep); - if (err) { - ERROR(dev, "can't start %s: %d\n", dev->in_ep->name, err); - goto fail; - } - dev->in_ep->driver_data = dev; - - dev->out_ep->desc = &bulk_out_desc; - err = usb_ep_enable(dev->out_ep); - if (err) { - ERROR(dev, "can't start %s: %d\n", dev->out_ep->name, err); - goto fail; - } - dev->out_ep->driver_data = dev; - - /* allocate a bunch of read buffers and queue them all at once. */ - ep = dev->out_ep; - for (i = 0; i < qlen && err == 0; i++) { - req = alloc_ep_req(ep, buflen); - if (req) { - req->complete = gmidi_complete; - err = usb_ep_queue(ep, req, GFP_ATOMIC); - if (err) { - DBG(dev, "%s queue req: %d\n", ep->name, err); - } - } else { - err = -ENOMEM; - } - } -fail: - /* caller is responsible for cleanup on error */ - return err; -} - - -static void gmidi_reset_config(struct gmidi_device *dev) -{ - if (dev->config == 0) { - return; - } - - DBG(dev, "reset config\n"); - - /* just disable endpoints, forcing completion of pending i/o. - * all our completion handlers free their requests in this case. - */ - usb_ep_disable(dev->in_ep); - usb_ep_disable(dev->out_ep); - dev->config = 0; -} - -/* change our operational config. this code must agree with the code - * that returns config descriptors, and altsetting code. - * - * it's also responsible for power management interactions. some - * configurations might not work with our current power sources. - * - * note that some device controller hardware will constrain what this - * code can do, perhaps by disallowing more than one configuration or - * by limiting configuration choices (like the pxa2xx). - */ -static int -gmidi_set_config(struct gmidi_device *dev, unsigned number, gfp_t gfp_flags) -{ - int result = 0; - struct usb_gadget *gadget = dev->gadget; - -#if 0 - /* FIXME */ - /* Hacking this bit out fixes a bug where on receipt of two - USB_REQ_SET_CONFIGURATION messages, we end up with no - buffered OUT requests waiting for data. This is clearly - hiding a bug elsewhere, because if the config didn't - change then we really shouldn't do anything. */ - /* Having said that, when we do "change" from config 1 - to config 1, we at least gmidi_reset_config() which - clears out any requests on endpoints, so it's not like - we leak or anything. */ - if (number == dev->config) { - return 0; - } -#endif - - gmidi_reset_config(dev); - - switch (number) { - case GMIDI_CONFIG: - result = set_gmidi_config(dev, gfp_flags); - break; - default: - result = -EINVAL; - /* FALL THROUGH */ - case 0: - return result; - } - - if (!result && (!dev->in_ep || !dev->out_ep)) { - result = -ENODEV; - } - if (result) { - gmidi_reset_config(dev); - } else { - char *speed; - - switch (gadget->speed) { - case USB_SPEED_LOW: speed = "low"; break; - case USB_SPEED_FULL: speed = "full"; break; - case USB_SPEED_HIGH: speed = "high"; break; - default: speed = "?"; break; - } - - dev->config = number; - INFO(dev, "%s speed\n", speed); - } - return result; -} - - -static void gmidi_setup_complete(struct usb_ep *ep, struct usb_request *req) -{ - if (req->status || req->actual != req->length) { - DBG((struct gmidi_device *) ep->driver_data, - "setup complete --> %d, %d/%d\n", - req->status, req->actual, req->length); - } -} - -/* - * The setup() callback implements all the ep0 functionality that's - * not handled lower down, in hardware or the hardware driver (like - * device and endpoint feature flags, and their status). It's all - * housekeeping for the gadget function we're implementing. Most of - * the work is in config-specific setup. - */ -static int gmidi_setup(struct usb_gadget *gadget, - const struct usb_ctrlrequest *ctrl) -{ - struct gmidi_device *dev = get_gadget_data(gadget); - struct usb_request *req = dev->req; - int value = -EOPNOTSUPP; - u16 w_index = le16_to_cpu(ctrl->wIndex); - u16 w_value = le16_to_cpu(ctrl->wValue); - u16 w_length = le16_to_cpu(ctrl->wLength); - - /* usually this stores reply data in the pre-allocated ep0 buffer, - * but config change events will reconfigure hardware. - */ - req->zero = 0; - switch (ctrl->bRequest) { - - case USB_REQ_GET_DESCRIPTOR: - if (ctrl->bRequestType != USB_DIR_IN) { - goto unknown; - } - switch (w_value >> 8) { - - case USB_DT_DEVICE: - device_desc.bMaxPacketSize0 = gadget->ep0->maxpacket; - value = min(w_length, (u16) sizeof(device_desc)); - memcpy(req->buf, &device_desc, value); - break; - case USB_DT_CONFIG: - value = config_buf(gadget, req->buf, - w_value >> 8, - w_value & 0xff); - if (value >= 0) { - value = min(w_length, (u16)value); - } - break; - - case USB_DT_STRING: - /* wIndex == language code. - * this driver only handles one language, you can - * add string tables for other languages, using - * any UTF-8 characters - */ - value = usb_gadget_get_string(&stringtab, - w_value & 0xff, req->buf); - if (value >= 0) { - value = min(w_length, (u16)value); - } - break; - } - break; - - /* currently two configs, two speeds */ - case USB_REQ_SET_CONFIGURATION: - if (ctrl->bRequestType != 0) { - goto unknown; - } - if (gadget->a_hnp_support) { - DBG(dev, "HNP available\n"); - } else if (gadget->a_alt_hnp_support) { - DBG(dev, "HNP needs a different root port\n"); - } else { - VDBG(dev, "HNP inactive\n"); - } - spin_lock(&dev->lock); - value = gmidi_set_config(dev, w_value, GFP_ATOMIC); - spin_unlock(&dev->lock); - break; - case USB_REQ_GET_CONFIGURATION: - if (ctrl->bRequestType != USB_DIR_IN) { - goto unknown; - } - *(u8 *)req->buf = dev->config; - value = min(w_length, (u16)1); - break; - - /* until we add altsetting support, or other interfaces, - * only 0/0 are possible. pxa2xx only supports 0/0 (poorly) - * and already killed pending endpoint I/O. - */ - case USB_REQ_SET_INTERFACE: - if (ctrl->bRequestType != USB_RECIP_INTERFACE) { - goto unknown; - } - spin_lock(&dev->lock); - if (dev->config && w_index < GMIDI_NUM_INTERFACES - && w_value == 0) - { - u8 config = dev->config; - - /* resets interface configuration, forgets about - * previous transaction state (queued bufs, etc) - * and re-inits endpoint state (toggle etc) - * no response queued, just zero status == success. - * if we had more than one interface we couldn't - * use this "reset the config" shortcut. - */ - gmidi_reset_config(dev); - gmidi_set_config(dev, config, GFP_ATOMIC); - value = 0; - } - spin_unlock(&dev->lock); - break; - case USB_REQ_GET_INTERFACE: - if (ctrl->bRequestType != (USB_DIR_IN|USB_RECIP_INTERFACE)) { - goto unknown; - } - if (!dev->config) { - break; - } - if (w_index >= GMIDI_NUM_INTERFACES) { - value = -EDOM; - break; - } - *(u8 *)req->buf = 0; - value = min(w_length, (u16)1); - break; - - default: -unknown: - VDBG(dev, "unknown control req%02x.%02x v%04x i%04x l%d\n", - ctrl->bRequestType, ctrl->bRequest, - w_value, w_index, w_length); - } - - /* respond with data transfer before status phase? */ - if (value >= 0) { - req->length = value; - req->zero = value < w_length; - value = usb_ep_queue(gadget->ep0, req, GFP_ATOMIC); - if (value < 0) { - DBG(dev, "ep_queue --> %d\n", value); - req->status = 0; - gmidi_setup_complete(gadget->ep0, req); - } - } - - /* device either stalls (value < 0) or reports success */ - return value; -} - -static void gmidi_disconnect(struct usb_gadget *gadget) -{ - struct gmidi_device *dev = get_gadget_data(gadget); - unsigned long flags; - - spin_lock_irqsave(&dev->lock, flags); - gmidi_reset_config(dev); - - /* a more significant application might have some non-usb - * activities to quiesce here, saving resources like power - * or pushing the notification up a network stack. - */ - spin_unlock_irqrestore(&dev->lock, flags); - - /* next we may get setup() calls to enumerate new connections; - * or an unbind() during shutdown (including removing module). - */ -} - -static void /* __init_or_exit */ gmidi_unbind(struct usb_gadget *gadget) -{ - struct gmidi_device *dev = get_gadget_data(gadget); - struct snd_card *card; - - DBG(dev, "unbind\n"); - - card = dev->card; - dev->card = NULL; - if (card) { - snd_card_free(card); - } - - /* we've already been disconnected ... no i/o is active */ - if (dev->req) { - dev->req->length = USB_BUFSIZ; - free_ep_req(gadget->ep0, dev->req); - } - kfree(dev); - set_gadget_data(gadget, NULL); -} - -static int gmidi_snd_free(struct snd_device *device) +static int __exit midi_unbind(struct usb_composite_dev *dev) { return 0; } -static void gmidi_transmit_packet(struct usb_request *req, uint8_t p0, - uint8_t p1, uint8_t p2, uint8_t p3) -{ - unsigned length = req->length; - u8 *buf = (u8 *)req->buf + length; - - buf[0] = p0; - buf[1] = p1; - buf[2] = p2; - buf[3] = p3; - req->length = length + 4; -} - -/* - * Converts MIDI commands to USB MIDI packets. - */ -static void gmidi_transmit_byte(struct usb_request *req, - struct gmidi_in_port *port, uint8_t b) -{ - uint8_t p0 = port->cable; - - if (b >= 0xf8) { - gmidi_transmit_packet(req, p0 | 0x0f, b, 0, 0); - } else if (b >= 0xf0) { - switch (b) { - case 0xf0: - port->data[0] = b; - port->state = STATE_SYSEX_1; - break; - case 0xf1: - case 0xf3: - port->data[0] = b; - port->state = STATE_1PARAM; - break; - case 0xf2: - port->data[0] = b; - port->state = STATE_2PARAM_1; - break; - case 0xf4: - case 0xf5: - port->state = STATE_UNKNOWN; - break; - case 0xf6: - gmidi_transmit_packet(req, p0 | 0x05, 0xf6, 0, 0); - port->state = STATE_UNKNOWN; - break; - case 0xf7: - switch (port->state) { - case STATE_SYSEX_0: - gmidi_transmit_packet(req, - p0 | 0x05, 0xf7, 0, 0); - break; - case STATE_SYSEX_1: - gmidi_transmit_packet(req, - p0 | 0x06, port->data[0], 0xf7, 0); - break; - case STATE_SYSEX_2: - gmidi_transmit_packet(req, - p0 | 0x07, port->data[0], - port->data[1], 0xf7); - break; - } - port->state = STATE_UNKNOWN; - break; - } - } else if (b >= 0x80) { - port->data[0] = b; - if (b >= 0xc0 && b <= 0xdf) - port->state = STATE_1PARAM; - else - port->state = STATE_2PARAM_1; - } else { /* b < 0x80 */ - switch (port->state) { - case STATE_1PARAM: - if (port->data[0] < 0xf0) { - p0 |= port->data[0] >> 4; - } else { - p0 |= 0x02; - port->state = STATE_UNKNOWN; - } - gmidi_transmit_packet(req, p0, port->data[0], b, 0); - break; - case STATE_2PARAM_1: - port->data[1] = b; - port->state = STATE_2PARAM_2; - break; - case STATE_2PARAM_2: - if (port->data[0] < 0xf0) { - p0 |= port->data[0] >> 4; - port->state = STATE_2PARAM_1; - } else { - p0 |= 0x03; - port->state = STATE_UNKNOWN; - } - gmidi_transmit_packet(req, - p0, port->data[0], port->data[1], b); - break; - case STATE_SYSEX_0: - port->data[0] = b; - port->state = STATE_SYSEX_1; - break; - case STATE_SYSEX_1: - port->data[1] = b; - port->state = STATE_SYSEX_2; - break; - case STATE_SYSEX_2: - gmidi_transmit_packet(req, - p0 | 0x04, port->data[0], port->data[1], b); - port->state = STATE_SYSEX_0; - break; - } - } -} - -static void gmidi_transmit(struct gmidi_device *dev, struct usb_request *req) -{ - struct usb_ep *ep = dev->in_ep; - struct gmidi_in_port *port = &dev->in_port; - - if (!ep) { - return; - } - if (!req) { - req = alloc_ep_req(ep, buflen); - } - if (!req) { - ERROR(dev, "gmidi_transmit: alloc_ep_request failed\n"); - return; - } - req->length = 0; - req->complete = gmidi_complete; - - if (port->active) { - while (req->length + 3 < buflen) { - uint8_t b; - if (snd_rawmidi_transmit(dev->in_substream, &b, 1) - != 1) - { - port->active = 0; - break; - } - gmidi_transmit_byte(req, port, b); - } - } - if (req->length > 0) { - usb_ep_queue(ep, req, GFP_ATOMIC); - } else { - free_ep_req(ep, req); - } -} - -static void gmidi_in_tasklet(unsigned long data) -{ - struct gmidi_device *dev = (struct gmidi_device *)data; - - gmidi_transmit(dev, NULL); -} - -static int gmidi_in_open(struct snd_rawmidi_substream *substream) -{ - struct gmidi_device *dev = substream->rmidi->private_data; - - VDBG(dev, "gmidi_in_open\n"); - dev->in_substream = substream; - dev->in_port.state = STATE_UNKNOWN; - return 0; -} - -static int gmidi_in_close(struct snd_rawmidi_substream *substream) -{ - struct gmidi_device *dev = substream->rmidi->private_data; - - VDBG(dev, "gmidi_in_close\n"); - return 0; -} - -static void gmidi_in_trigger(struct snd_rawmidi_substream *substream, int up) -{ - struct gmidi_device *dev = substream->rmidi->private_data; - - VDBG(dev, "gmidi_in_trigger %d\n", up); - dev->in_port.active = up; - if (up) { - tasklet_hi_schedule(&dev->tasklet); - } -} - -static int gmidi_out_open(struct snd_rawmidi_substream *substream) -{ - struct gmidi_device *dev = substream->rmidi->private_data; - - VDBG(dev, "gmidi_out_open\n"); - dev->out_substream = substream; - return 0; -} - -static int gmidi_out_close(struct snd_rawmidi_substream *substream) -{ - struct gmidi_device *dev = substream->rmidi->private_data; - - VDBG(dev, "gmidi_out_close\n"); - return 0; -} - -static void gmidi_out_trigger(struct snd_rawmidi_substream *substream, int up) -{ - struct gmidi_device *dev = substream->rmidi->private_data; - - VDBG(dev, "gmidi_out_trigger %d\n", up); - if (up) { - set_bit(substream->number, &dev->out_triggered); - } else { - clear_bit(substream->number, &dev->out_triggered); - } -} - -static struct snd_rawmidi_ops gmidi_in_ops = { - .open = gmidi_in_open, - .close = gmidi_in_close, - .trigger = gmidi_in_trigger, +static struct usb_configuration midi_config = { + .label = "MIDI Gadget", + .bConfigurationValue = 1, + /* .iConfiguration = DYNAMIC */ + .bmAttributes = USB_CONFIG_ATT_ONE, + .bMaxPower = CONFIG_USB_GADGET_VBUS_DRAW / 2, }; -static struct snd_rawmidi_ops gmidi_out_ops = { - .open = gmidi_out_open, - .close = gmidi_out_close, - .trigger = gmidi_out_trigger -}; - -/* register as a sound "card" */ -static int gmidi_register_card(struct gmidi_device *dev) +static int __init midi_bind_config(struct usb_configuration *c) { - struct snd_card *card; - struct snd_rawmidi *rmidi; - int err; - int out_ports = 1; - int in_ports = 1; - static struct snd_device_ops ops = { - .dev_free = gmidi_snd_free, - }; - - err = snd_card_create(index, id, THIS_MODULE, 0, &card); - if (err < 0) { - ERROR(dev, "snd_card_create failed\n"); - goto fail; - } - dev->card = card; - - err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, dev, &ops); - if (err < 0) { - ERROR(dev, "snd_device_new failed: error %d\n", err); - goto fail; - } - - strcpy(card->driver, longname); - strcpy(card->longname, longname); - strcpy(card->shortname, shortname); - - /* Set up rawmidi */ - dev->in_port.dev = dev; - dev->in_port.active = 0; - snd_component_add(card, "MIDI"); - err = snd_rawmidi_new(card, "USB MIDI Gadget", 0, - out_ports, in_ports, &rmidi); - if (err < 0) { - ERROR(dev, "snd_rawmidi_new failed: error %d\n", err); - goto fail; - } - dev->rmidi = rmidi; - strcpy(rmidi->name, card->shortname); - rmidi->info_flags = SNDRV_RAWMIDI_INFO_OUTPUT | - SNDRV_RAWMIDI_INFO_INPUT | - SNDRV_RAWMIDI_INFO_DUPLEX; - rmidi->private_data = dev; - - /* Yes, rawmidi OUTPUT = USB IN, and rawmidi INPUT = USB OUT. - It's an upside-down world being a gadget. */ - snd_rawmidi_set_ops(rmidi, SNDRV_RAWMIDI_STREAM_OUTPUT, &gmidi_in_ops); - snd_rawmidi_set_ops(rmidi, SNDRV_RAWMIDI_STREAM_INPUT, &gmidi_out_ops); - - snd_card_set_dev(card, &dev->gadget->dev); - - /* register it - we're ready to go */ - err = snd_card_register(card); - if (err < 0) { - ERROR(dev, "snd_card_register failed\n"); - goto fail; - } - - VDBG(dev, "gmidi_register_card finished ok\n"); - return 0; - -fail: - if (dev->card) { - snd_card_free(dev->card); - dev->card = NULL; - } - return err; + return f_midi_bind_config(c, index, id, + in_ports, out_ports, + buflen, qlen); } -/* - * Creates an output endpoint, and initializes output ports. - */ -static int __init gmidi_bind(struct usb_gadget *gadget) +static int __init midi_bind(struct usb_composite_dev *cdev) { - struct gmidi_device *dev; - struct usb_ep *in_ep, *out_ep; - int gcnum, err = 0; + struct usb_gadget *gadget = cdev->gadget; + int gcnum, status; - /* support optional vendor/distro customization */ - if (idVendor) { - if (!idProduct) { - pr_err("idVendor needs idProduct!\n"); - return -ENODEV; - } - device_desc.idVendor = cpu_to_le16(idVendor); - device_desc.idProduct = cpu_to_le16(idProduct); - if (bcdDevice) { - device_desc.bcdDevice = cpu_to_le16(bcdDevice); - } - } - if (iManufacturer) { - strlcpy(manufacturer, iManufacturer, sizeof(manufacturer)); - } else { - snprintf(manufacturer, sizeof(manufacturer), "%s %s with %s", - init_utsname()->sysname, init_utsname()->release, - gadget->name); - } - if (iProduct) { - strlcpy(product_desc, iProduct, sizeof(product_desc)); - } - if (iSerialNumber) { - device_desc.iSerialNumber = STRING_SERIAL, - strlcpy(serial_number, iSerialNumber, sizeof(serial_number)); - } + status = usb_string_id(cdev); + if (status < 0) + return status; + strings_dev[STRING_MANUFACTURER_IDX].id = status; + device_desc.iManufacturer = status; - /* Bulk-only drivers like this one SHOULD be able to - * autoconfigure on any sane usb controller driver, - * but there may also be important quirks to address. - */ - usb_ep_autoconfig_reset(gadget); - in_ep = usb_ep_autoconfig(gadget, &bulk_in_desc); - if (!in_ep) { -autoconf_fail: - pr_err("%s: can't autoconfigure on %s\n", - shortname, gadget->name); - return -ENODEV; - } - EP_IN_NAME = in_ep->name; - in_ep->driver_data = in_ep; /* claim */ + status = usb_string_id(cdev); + if (status < 0) + return status; + strings_dev[STRING_PRODUCT_IDX].id = status; + device_desc.iProduct = status; - out_ep = usb_ep_autoconfig(gadget, &bulk_out_desc); - if (!out_ep) { - goto autoconf_fail; - } - EP_OUT_NAME = out_ep->name; - out_ep->driver_data = out_ep; /* claim */ + /* config description */ + status = usb_string_id(cdev); + if (status < 0) + return status; + strings_dev[STRING_DESCRIPTION_IDX].id = status; + + midi_config.iConfiguration = status; gcnum = usb_gadget_controller_number(gadget); - if (gcnum >= 0) { - device_desc.bcdDevice = cpu_to_le16(0x0200 + gcnum); - } else { + if (gcnum < 0) { /* gmidi is so simple (no altsettings) that * it SHOULD NOT have problems with bulk-capable hardware. * so warn about unrecognized controllers, don't panic. */ pr_warning("%s: controller '%s' not recognized\n", - shortname, gadget->name); + __func__, gadget->name); device_desc.bcdDevice = cpu_to_le16(0x9999); + } else { + device_desc.bcdDevice = cpu_to_le16(0x0200 + gcnum); } + status = usb_add_config(cdev, &midi_config, midi_bind_config); + if (status < 0) + return status; - /* ok, we made sense of the hardware ... */ - dev = kzalloc(sizeof(*dev), GFP_KERNEL); - if (!dev) { - return -ENOMEM; - } - spin_lock_init(&dev->lock); - dev->gadget = gadget; - dev->in_ep = in_ep; - dev->out_ep = out_ep; - set_gadget_data(gadget, dev); - tasklet_init(&dev->tasklet, gmidi_in_tasklet, (unsigned long)dev); - - /* preallocate control response and buffer */ - dev->req = alloc_ep_req(gadget->ep0, USB_BUFSIZ); - if (!dev->req) { - err = -ENOMEM; - goto fail; - } - - dev->req->complete = gmidi_setup_complete; - - gadget->ep0->driver_data = dev; - - INFO(dev, "%s, version: " DRIVER_VERSION "\n", longname); - INFO(dev, "using %s, OUT %s IN %s\n", gadget->name, - EP_OUT_NAME, EP_IN_NAME); - - /* register as an ALSA sound card */ - err = gmidi_register_card(dev); - if (err < 0) { - goto fail; - } - - VDBG(dev, "gmidi_bind finished ok\n"); + pr_info("%s\n", longname); return 0; - -fail: - gmidi_unbind(gadget); - return err; -} - - -static void gmidi_suspend(struct usb_gadget *gadget) -{ - struct gmidi_device *dev = get_gadget_data(gadget); - - if (gadget->speed == USB_SPEED_UNKNOWN) { - return; - } - - DBG(dev, "suspend\n"); -} - -static void gmidi_resume(struct usb_gadget *gadget) -{ - struct gmidi_device *dev = get_gadget_data(gadget); - - DBG(dev, "resume\n"); } - -static struct usb_gadget_driver gmidi_driver = { - .speed = USB_SPEED_FULL, - .function = (char *)longname, - .unbind = gmidi_unbind, - - .setup = gmidi_setup, - .disconnect = gmidi_disconnect, - - .suspend = gmidi_suspend, - .resume = gmidi_resume, - - .driver = { - .name = (char *)shortname, - .owner = THIS_MODULE, - }, +static struct usb_composite_driver midi_driver = { + .name = (char *) longname, + .dev = &device_desc, + .strings = dev_strings, + .max_speed = USB_SPEED_HIGH, + .unbind = __exit_p(midi_unbind), }; -static int __init gmidi_init(void) +static int __init midi_init(void) { - return usb_gadget_probe_driver(&gmidi_driver, gmidi_bind); + return usb_composite_probe(&midi_driver, midi_bind); } -module_init(gmidi_init); +module_init(midi_init); -static void __exit gmidi_cleanup(void) +static void __exit midi_cleanup(void) { - usb_gadget_unregister_driver(&gmidi_driver); + usb_composite_unregister(&midi_driver); } -module_exit(gmidi_cleanup); +module_exit(midi_cleanup); diff --git a/drivers/usb/gadget/hid.c b/drivers/usb/gadget/hid.c index 9fb575034a0e..f888c3ede860 100644 --- a/drivers/usb/gadget/hid.c +++ b/drivers/usb/gadget/hid.c @@ -9,15 +9,6 @@ * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ diff --git a/drivers/usb/gadget/imx_udc.c b/drivers/usb/gadget/imx_udc.c index 692fd9b2248b..2d978c0e7ced 100644 --- a/drivers/usb/gadget/imx_udc.c +++ b/drivers/usb/gadget/imx_udc.c @@ -689,7 +689,7 @@ static int imx_ep_enable(struct usb_ep *usb_ep, return -EINVAL; } - if (imx_ep->fifosize < le16_to_cpu(desc->wMaxPacketSize)) { + if (imx_ep->fifosize < usb_endpoint_maxp(desc)) { D_ERR(imx_usb->dev, "<%s> bad %s maxpacket\n", __func__, usb_ep->name); return -ERANGE; @@ -1478,7 +1478,7 @@ static int __init imx_udc_probe(struct platform_device *pdev) for (i = 0; i < IMX_USB_NB_EP + 1; i++) { ret = request_irq(imx_usb->usbd_int[i], intr_handler(i), - IRQF_DISABLED, driver_name, imx_usb); + 0, driver_name, imx_usb); if (ret) { dev_err(&pdev->dev, "can't get irq %i, err %d\n", imx_usb->usbd_int[i], ret); diff --git a/drivers/usb/gadget/imx_udc.h b/drivers/usb/gadget/imx_udc.h index 7136c242b4ec..d118fb777840 100644 --- a/drivers/usb/gadget/imx_udc.h +++ b/drivers/usb/gadget/imx_udc.h @@ -8,11 +8,6 @@ * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ #ifndef __LINUX_USB_GADGET_IMX_H diff --git a/drivers/usb/gadget/inode.c b/drivers/usb/gadget/inode.c index 1b240990448f..a392ec0d2d51 100644 --- a/drivers/usb/gadget/inode.c +++ b/drivers/usb/gadget/inode.c @@ -8,15 +8,6 @@ * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ diff --git a/drivers/usb/gadget/langwell_udc.c b/drivers/usb/gadget/langwell_udc.c index a06e2c27b435..c9fa3bf5b377 100644 --- a/drivers/usb/gadget/langwell_udc.c +++ b/drivers/usb/gadget/langwell_udc.c @@ -5,16 +5,6 @@ * This program is free software; you can redistribute it and/or modify it * under the terms and conditions of the GNU General Public License, * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * */ @@ -60,9 +50,6 @@ static const char driver_name[] = "langwell_udc"; static const char driver_desc[] = DRIVER_DESC; -/* controller device global variable */ -static struct langwell_udc *the_controller; - /* for endpoint 0 operations */ static const struct usb_endpoint_descriptor langwell_ep0_desc = { @@ -283,7 +270,7 @@ static int langwell_ep_enable(struct usb_ep *_ep, if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN) return -ESHUTDOWN; - max = le16_to_cpu(desc->wMaxPacketSize); + max = usb_endpoint_maxp(desc); /* * disable HW zero length termination select @@ -1321,9 +1308,12 @@ static int langwell_pullup(struct usb_gadget *_gadget, int is_on) return 0; } -static int langwell_start(struct usb_gadget_driver *driver, - int (*bind)(struct usb_gadget *)); -static int langwell_stop(struct usb_gadget_driver *driver); +static int langwell_start(struct usb_gadget *g, + struct usb_gadget_driver *driver); + +static int langwell_stop(struct usb_gadget *g, + struct usb_gadget_driver *driver); + /* device controller usb_gadget_ops structure */ static const struct usb_gadget_ops langwell_ops = { @@ -1345,8 +1335,8 @@ static const struct usb_gadget_ops langwell_ops = { /* D+ pullup, software-controlled connect/disconnect to USB host */ .pullup = langwell_pullup, - .start = langwell_start, - .stop = langwell_stop, + .udc_start = langwell_start, + .udc_stop = langwell_stop, }; @@ -1561,7 +1551,7 @@ static void stop_activity(struct langwell_udc *dev, static ssize_t show_function(struct device *_dev, struct device_attribute *attr, char *buf) { - struct langwell_udc *dev = the_controller; + struct langwell_udc *dev = dev_get_drvdata(_dev); if (!dev->driver || !dev->driver->function || strlen(dev->driver->function) > PAGE_SIZE) @@ -1572,11 +1562,25 @@ static ssize_t show_function(struct device *_dev, static DEVICE_ATTR(function, S_IRUGO, show_function, NULL); +static inline enum usb_device_speed lpm_device_speed(u32 reg) +{ + switch (LPM_PSPD(reg)) { + case LPM_SPEED_HIGH: + return USB_SPEED_HIGH; + case LPM_SPEED_FULL: + return USB_SPEED_FULL; + case LPM_SPEED_LOW: + return USB_SPEED_LOW; + default: + return USB_SPEED_UNKNOWN; + } +} + /* device "langwell_udc" sysfs attribute file */ static ssize_t show_langwell_udc(struct device *_dev, struct device_attribute *attr, char *buf) { - struct langwell_udc *dev = the_controller; + struct langwell_udc *dev = dev_get_drvdata(_dev); struct langwell_request *req; struct langwell_ep *ep = NULL; char *next; @@ -1700,20 +1704,7 @@ static ssize_t show_langwell_udc(struct device *_dev, "BmAttributes: %d\n\n", LPM_PTS(tmp_reg), (tmp_reg & LPM_STS) ? 1 : 0, - ({ - char *s; - switch (LPM_PSPD(tmp_reg)) { - case LPM_SPEED_FULL: - s = "Full Speed"; break; - case LPM_SPEED_LOW: - s = "Low Speed"; break; - case LPM_SPEED_HIGH: - s = "High Speed"; break; - default: - s = "Unknown Speed"; break; - } - s; - }), + usb_speed_string(lpm_device_speed(tmp_reg)), (tmp_reg & LPM_PFSC) ? "Force Full Speed" : "Not Force", (tmp_reg & LPM_PHCD) ? "Disabled" : "Enabled", LPM_BA(tmp_reg)); @@ -1821,7 +1812,7 @@ static DEVICE_ATTR(langwell_udc, S_IRUGO, show_langwell_udc, NULL); static ssize_t store_remote_wakeup(struct device *_dev, struct device_attribute *attr, const char *buf, size_t count) { - struct langwell_udc *dev = the_controller; + struct langwell_udc *dev = dev_get_drvdata(_dev); unsigned long flags; ssize_t rc = count; @@ -1857,21 +1848,15 @@ static DEVICE_ATTR(remote_wakeup, S_IWUSR, NULL, store_remote_wakeup); * the driver might get unbound. */ -static int langwell_start(struct usb_gadget_driver *driver, - int (*bind)(struct usb_gadget *)) +static int langwell_start(struct usb_gadget *g, + struct usb_gadget_driver *driver) { - struct langwell_udc *dev = the_controller; + struct langwell_udc *dev = gadget_to_langwell(g); unsigned long flags; int retval; - if (!dev) - return -ENODEV; - dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__); - if (dev->driver) - return -EBUSY; - spin_lock_irqsave(&dev->lock, flags); /* hook up the driver ... */ @@ -1881,18 +1866,9 @@ static int langwell_start(struct usb_gadget_driver *driver, spin_unlock_irqrestore(&dev->lock, flags); - retval = bind(&dev->gadget); - if (retval) { - dev_dbg(&dev->pdev->dev, "bind to driver %s --> %d\n", - driver->driver.name, retval); - dev->driver = NULL; - dev->gadget.dev.driver = NULL; - return retval; - } - retval = device_create_file(&dev->pdev->dev, &dev_attr_function); if (retval) - goto err_unbind; + goto err; dev->usb_state = USB_STATE_ATTACHED; dev->ep0_state = WAIT_FOR_SETUP; @@ -1909,31 +1885,27 @@ static int langwell_start(struct usb_gadget_driver *driver, dev_info(&dev->pdev->dev, "register driver: %s\n", driver->driver.name); dev_dbg(&dev->pdev->dev, "<--- %s()\n", __func__); + return 0; -err_unbind: - driver->unbind(&dev->gadget); +err: dev->gadget.dev.driver = NULL; dev->driver = NULL; dev_dbg(&dev->pdev->dev, "<--- %s()\n", __func__); + return retval; } /* unregister gadget driver */ -static int langwell_stop(struct usb_gadget_driver *driver) +static int langwell_stop(struct usb_gadget *g, + struct usb_gadget_driver *driver) { - struct langwell_udc *dev = the_controller; + struct langwell_udc *dev = gadget_to_langwell(g); unsigned long flags; - if (!dev) - return -ENODEV; - dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__); - if (unlikely(!driver || !driver->unbind)) - return -EINVAL; - /* exit PHY low power suspend */ if (dev->pdev->device != 0x0829) langwell_phy_low_power(dev, 0); @@ -1956,8 +1928,6 @@ static int langwell_stop(struct usb_gadget_driver *driver) stop_activity(dev, driver); spin_unlock_irqrestore(&dev->lock, flags); - /* unbind gadget driver */ - driver->unbind(&dev->gadget); dev->gadget.dev.driver = NULL; dev->driver = NULL; @@ -1966,6 +1936,7 @@ static int langwell_stop(struct usb_gadget_driver *driver) dev_info(&dev->pdev->dev, "unregistered driver '%s'\n", driver->driver.name); dev_dbg(&dev->pdev->dev, "<--- %s()\n", __func__); + return 0; } @@ -2657,12 +2628,10 @@ done: dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__); } - /* port change detect interrupt handler */ static void handle_port_change(struct langwell_udc *dev) { u32 portsc1, devlc; - u32 speed; dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__); @@ -2677,24 +2646,9 @@ static void handle_port_change(struct langwell_udc *dev) /* bus reset is finished */ if (!(portsc1 & PORTS_PR)) { /* get the speed */ - speed = LPM_PSPD(devlc); - switch (speed) { - case LPM_SPEED_HIGH: - dev->gadget.speed = USB_SPEED_HIGH; - break; - case LPM_SPEED_FULL: - dev->gadget.speed = USB_SPEED_FULL; - break; - case LPM_SPEED_LOW: - dev->gadget.speed = USB_SPEED_LOW; - break; - default: - dev->gadget.speed = USB_SPEED_UNKNOWN; - break; - } - dev_vdbg(&dev->pdev->dev, - "speed = %d, dev->gadget.speed = %d\n", - speed, dev->gadget.speed); + dev->gadget.speed = lpm_device_speed(devlc); + dev_vdbg(&dev->pdev->dev, "dev->gadget.speed = %d\n", + dev->gadget.speed); } /* LPM L0 to L1 */ @@ -2969,7 +2923,7 @@ static irqreturn_t langwell_irq(int irq, void *_dev) handle_port_change(dev); } - /* suspend interrrupt */ + /* suspend interrupt */ if (irq_sts & STS_SLI) { dev_vdbg(&dev->pdev->dev, "suspend interrupt\n"); handle_bus_suspend(dev); @@ -2999,7 +2953,7 @@ static irqreturn_t langwell_irq(int irq, void *_dev) /* release device structure */ static void gadget_release(struct device *_dev) { - struct langwell_udc *dev = the_controller; + struct langwell_udc *dev = dev_get_drvdata(_dev); dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__); @@ -3057,7 +3011,7 @@ static void sram_deinit(struct langwell_udc *dev) /* tear down the binding between this driver and the pci device */ static void langwell_udc_remove(struct pci_dev *pdev) { - struct langwell_udc *dev = the_controller; + struct langwell_udc *dev = pci_get_drvdata(pdev); DECLARE_COMPLETION(done); @@ -3124,8 +3078,6 @@ static void langwell_udc_remove(struct pci_dev *pdev) /* free dev, wait for the release() finished */ wait_for_completion(&done); - - the_controller = NULL; } @@ -3144,11 +3096,6 @@ static int langwell_udc_probe(struct pci_dev *pdev, size_t size; int retval; - if (the_controller) { - dev_warn(&pdev->dev, "ignoring\n"); - return -EBUSY; - } - /* alloc, and start init */ dev = kzalloc(sizeof *dev, GFP_KERNEL); if (dev == NULL) { @@ -3368,8 +3315,6 @@ static int langwell_udc_probe(struct pci_dev *pdev, "After langwell_udc_probe(), print all registers:\n"); print_all_registers(dev); - the_controller = dev; - retval = device_register(&dev->gadget.dev); if (retval) goto error; @@ -3404,7 +3349,7 @@ error: /* device controller suspend */ static int langwell_udc_suspend(struct pci_dev *pdev, pm_message_t state) { - struct langwell_udc *dev = the_controller; + struct langwell_udc *dev = pci_get_drvdata(pdev); dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__); @@ -3452,7 +3397,7 @@ static int langwell_udc_suspend(struct pci_dev *pdev, pm_message_t state) /* device controller resume */ static int langwell_udc_resume(struct pci_dev *pdev) { - struct langwell_udc *dev = the_controller; + struct langwell_udc *dev = pci_get_drvdata(pdev); size_t size; dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__); @@ -3534,7 +3479,7 @@ static int langwell_udc_resume(struct pci_dev *pdev) /* pci driver shutdown */ static void langwell_udc_shutdown(struct pci_dev *pdev) { - struct langwell_udc *dev = the_controller; + struct langwell_udc *dev = pci_get_drvdata(pdev); u32 usbmode; dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__); diff --git a/drivers/usb/gadget/langwell_udc.h b/drivers/usb/gadget/langwell_udc.h index f1d9c1bb04f3..ef79e242b7b0 100644 --- a/drivers/usb/gadget/langwell_udc.h +++ b/drivers/usb/gadget/langwell_udc.h @@ -5,16 +5,6 @@ * This program is free software; you can redistribute it and/or modify it * under the terms and conditions of the GNU General Public License, * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * */ #include <linux/usb/langwell_udc.h> @@ -231,3 +221,5 @@ struct langwell_udc { u16 dev_status; }; +#define gadget_to_langwell(g) container_of((g), struct langwell_udc, gadget) + diff --git a/drivers/usb/gadget/m66592-udc.c b/drivers/usb/gadget/m66592-udc.c index 491f825ed5c9..91d0af2a24a8 100644 --- a/drivers/usb/gadget/m66592-udc.c +++ b/drivers/usb/gadget/m66592-udc.c @@ -8,16 +8,6 @@ * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - * */ #include <linux/module.h> @@ -370,7 +360,7 @@ static void m66592_ep_setting(struct m66592 *m66592, struct m66592_ep *ep, ep->pipectr = get_pipectr_addr(pipenum); ep->pipenum = pipenum; - ep->ep.maxpacket = le16_to_cpu(desc->wMaxPacketSize); + ep->ep.maxpacket = usb_endpoint_maxp(desc); m66592->pipenum2ep[pipenum] = ep; m66592->epaddr2ep[desc->bEndpointAddress&USB_ENDPOINT_NUMBER_MASK] = ep; INIT_LIST_HEAD(&ep->queue); @@ -447,7 +437,7 @@ static int alloc_pipe_config(struct m66592_ep *ep, ep->type = info.type; info.epnum = desc->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK; - info.maxpacket = le16_to_cpu(desc->wMaxPacketSize); + info.maxpacket = usb_endpoint_maxp(desc); info.interval = desc->bInterval; if (desc->bEndpointAddress & USB_ENDPOINT_DIR_MASK) info.dir_in = 1; @@ -1674,7 +1664,7 @@ static int __init m66592_probe(struct platform_device *pdev) m66592->timer.data = (unsigned long)m66592; m66592->reg = reg; - ret = request_irq(ires->start, m66592_irq, IRQF_DISABLED | IRQF_SHARED, + ret = request_irq(ires->start, m66592_irq, IRQF_SHARED, udc_name, m66592); if (ret < 0) { pr_err("request_irq error (%d)\n", ret); diff --git a/drivers/usb/gadget/m66592-udc.h b/drivers/usb/gadget/m66592-udc.h index 7b93d579af37..9d9f7e39f037 100644 --- a/drivers/usb/gadget/m66592-udc.h +++ b/drivers/usb/gadget/m66592-udc.h @@ -8,16 +8,6 @@ * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - * */ #ifndef __M66592_UDC_H__ diff --git a/drivers/usb/gadget/mass_storage.c b/drivers/usb/gadget/mass_storage.c index d3eb27427c58..e24f72f82a47 100644 --- a/drivers/usb/gadget/mass_storage.c +++ b/drivers/usb/gadget/mass_storage.c @@ -10,15 +10,6 @@ * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ @@ -169,7 +160,7 @@ static struct usb_composite_driver msg_driver = { .name = "g_mass_storage", .dev = &msg_device_desc, .iProduct = DRIVER_DESC, - .max_speed = USB_SPEED_HIGH, + .max_speed = USB_SPEED_SUPER, .needs_serial = 1, }; diff --git a/drivers/usb/gadget/multi.c b/drivers/usb/gadget/multi.c index 8c7b74717d85..7e7f515b8b19 100644 --- a/drivers/usb/gadget/multi.c +++ b/drivers/usb/gadget/multi.c @@ -10,15 +10,6 @@ * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ diff --git a/drivers/usb/gadget/mv_udc.h b/drivers/usb/gadget/mv_udc.h index 65f1f7c3bd4e..daa75c12f336 100644 --- a/drivers/usb/gadget/mv_udc.h +++ b/drivers/usb/gadget/mv_udc.h @@ -1,3 +1,11 @@ +/* + * Copyright (C) 2011 Marvell International Ltd. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ #ifndef __MV_UDC_H #define __MV_UDC_H @@ -194,14 +202,25 @@ struct mv_udc { unsigned int ep0_dir; unsigned int dev_addr; + unsigned int test_mode; int errors; unsigned softconnect:1, vbus_active:1, remote_wakeup:1, softconnected:1, - force_fs:1; - struct clk *clk; + force_fs:1, + clock_gating:1, + active:1; + + struct work_struct vbus_work; + struct workqueue_struct *qwork; + + struct mv_usb_platform_data *pdata; + + /* some SOC has mutiple clock sources for USB*/ + unsigned int clknum; + struct clk *clk[0]; }; /* endpoint data structure */ @@ -225,6 +244,7 @@ struct mv_req { struct mv_dtd *dtd, *head, *tail; struct mv_ep *ep; struct list_head queue; + unsigned int test_mode; unsigned dtd_count; unsigned mapped:1; }; @@ -289,6 +309,4 @@ struct mv_dtd { struct mv_dtd *next_dtd_virt; }; -extern int mv_udc_phy_init(unsigned int base); - #endif diff --git a/drivers/usb/gadget/mv_udc_core.c b/drivers/usb/gadget/mv_udc_core.c index ce1ac2bcb314..892412103dd8 100644 --- a/drivers/usb/gadget/mv_udc_core.c +++ b/drivers/usb/gadget/mv_udc_core.c @@ -1,3 +1,14 @@ +/* + * Copyright (C) 2011 Marvell International Ltd. All rights reserved. + * Author: Chao Xie <chao.xie@marvell.com> + * Neil Zhang <zhangwm@marvell.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + #include <linux/module.h> #include <linux/pci.h> #include <linux/dma-mapping.h> @@ -22,6 +33,7 @@ #include <linux/irq.h> #include <linux/platform_device.h> #include <linux/clk.h> +#include <linux/platform_data/mv_usb.h> #include <asm/system.h> #include <asm/unaligned.h> @@ -45,6 +57,8 @@ #define LOOPS_USEC (1 << LOOPS_USEC_SHIFT) #define LOOPS(timeout) ((timeout) >> LOOPS_USEC_SHIFT) +static DECLARE_COMPLETION(release_done); + static const char driver_name[] = "mv_udc"; static const char driver_desc[] = DRIVER_DESC; @@ -53,6 +67,7 @@ static struct mv_udc *the_controller; int mv_usb_otgsc; static void nuke(struct mv_ep *ep, int status); +static void stop_activity(struct mv_udc *udc, struct usb_gadget_driver *driver); /* for endpoint 0 operations */ static const struct usb_endpoint_descriptor mv_ep0_desc = { @@ -82,14 +97,16 @@ static void ep0_reset(struct mv_udc *udc) (EP0_MAX_PKT_SIZE << EP_QUEUE_HEAD_MAX_PKT_LEN_POS) | EP_QUEUE_HEAD_IOS; + ep->dqh->next_dtd_ptr = EP_QUEUE_HEAD_NEXT_TERMINATE; + epctrlx = readl(&udc->op_regs->epctrlx[0]); if (i) { /* TX */ - epctrlx |= EPCTRL_TX_ENABLE | EPCTRL_TX_DATA_TOGGLE_RST + epctrlx |= EPCTRL_TX_ENABLE | (USB_ENDPOINT_XFER_CONTROL << EPCTRL_TX_EP_TYPE_SHIFT); } else { /* RX */ - epctrlx |= EPCTRL_RX_ENABLE | EPCTRL_RX_DATA_TOGGLE_RST + epctrlx |= EPCTRL_RX_ENABLE | (USB_ENDPOINT_XFER_CONTROL << EPCTRL_RX_EP_TYPE_SHIFT); } @@ -122,6 +139,7 @@ static int process_ep_req(struct mv_udc *udc, int index, int i, direction; int retval = 0; u32 errors; + u32 bit_pos; curr_dqh = &udc->ep_dqh[index]; direction = index % 2; @@ -139,10 +157,20 @@ static int process_ep_req(struct mv_udc *udc, int index, errors = curr_dtd->size_ioc_sts & DTD_ERROR_MASK; if (!errors) { - remaining_length += + remaining_length = (curr_dtd->size_ioc_sts & DTD_PACKET_SIZE) >> DTD_LENGTH_BIT_POS; actual -= remaining_length; + + if (remaining_length) { + if (direction) { + dev_dbg(&udc->dev->dev, + "TX dTD remains data\n"); + retval = -EPROTO; + break; + } else + break; + } } else { dev_info(&udc->dev->dev, "complete_tr error: ep=%d %s: error = 0x%x\n", @@ -164,6 +192,20 @@ static int process_ep_req(struct mv_udc *udc, int index, if (retval) return retval; + if (direction == EP_DIR_OUT) + bit_pos = 1 << curr_req->ep->ep_num; + else + bit_pos = 1 << (16 + curr_req->ep->ep_num); + + while ((curr_dqh->curr_dtd_ptr == curr_dtd->td_dma)) { + if (curr_dtd->dtd_next == EP_QUEUE_HEAD_NEXT_TERMINATE) { + while (readl(&udc->op_regs->epstatus) & bit_pos) + udelay(1); + break; + } + udelay(1); + } + curr_req->req.actual = actual; return 0; @@ -335,7 +377,7 @@ static int queue_dtd(struct mv_ep *ep, struct mv_req *req) } else { /* Write dQH next pointer and terminate bit to 0 */ dqh->next_dtd_ptr = req->head->td_dma - & EP_QUEUE_HEAD_NEXT_POINTER_MASK;; + & EP_QUEUE_HEAD_NEXT_POINTER_MASK; dqh->size_ioc_int_sts = 0; /* Ensure that updates to the QH will occur before priming. */ @@ -376,7 +418,7 @@ static int queue_dtd(struct mv_ep *ep, struct mv_req *req) } } done: - return retval;; + return retval; } static struct mv_dtd *build_dtd(struct mv_req *req, unsigned *length, @@ -481,6 +523,7 @@ static int mv_ep_enable(struct usb_ep *_ep, u16 max = 0; u32 bit_pos, epctrlx, direction; unsigned char zlt = 0, ios = 0, mult = 0; + unsigned long flags; ep = container_of(_ep, struct mv_ep, ep); udc = ep->udc; @@ -493,7 +536,7 @@ static int mv_ep_enable(struct usb_ep *_ep, return -ESHUTDOWN; direction = ep_dir(ep); - max = le16_to_cpu(desc->wMaxPacketSize); + max = usb_endpoint_maxp(desc); /* * disable HW zero length termination select @@ -501,9 +544,6 @@ static int mv_ep_enable(struct usb_ep *_ep, */ zlt = 1; - /* Get the endpoint queue head address */ - dqh = (struct mv_dqh *)ep->dqh; - bit_pos = 1 << ((direction == EP_DIR_OUT ? 0 : 16) + ep->ep_num); /* Check if the Endpoint is Primed */ @@ -532,7 +572,7 @@ static int mv_ep_enable(struct usb_ep *_ep, case USB_ENDPOINT_XFER_ISOC: /* Calculate transactions needed for high bandwidth iso */ mult = (unsigned char)(1 + ((max >> 11) & 0x03)); - max = max & 0x8ff; /* bit 0~10 */ + max = max & 0x7ff; /* bit 0~10 */ /* 3 transactions at most */ if (mult > 3) goto en_done; @@ -540,6 +580,10 @@ static int mv_ep_enable(struct usb_ep *_ep, default: goto en_done; } + + spin_lock_irqsave(&udc->lock, flags); + /* Get the endpoint queue head address */ + dqh = ep->dqh; dqh->max_packet_length = (max << EP_QUEUE_HEAD_MAX_PKT_LEN_POS) | (mult << EP_QUEUE_HEAD_MULT_POS) | (zlt ? EP_QUEUE_HEAD_ZLT_SEL : 0) @@ -572,18 +616,20 @@ static int mv_ep_enable(struct usb_ep *_ep, */ epctrlx = readl(&udc->op_regs->epctrlx[ep->ep_num]); if ((epctrlx & EPCTRL_RX_ENABLE) == 0) { - epctrlx |= ((desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) + epctrlx |= (USB_ENDPOINT_XFER_BULK << EPCTRL_RX_EP_TYPE_SHIFT); writel(epctrlx, &udc->op_regs->epctrlx[ep->ep_num]); } epctrlx = readl(&udc->op_regs->epctrlx[ep->ep_num]); if ((epctrlx & EPCTRL_TX_ENABLE) == 0) { - epctrlx |= ((desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) + epctrlx |= (USB_ENDPOINT_XFER_BULK << EPCTRL_TX_EP_TYPE_SHIFT); writel(epctrlx, &udc->op_regs->epctrlx[ep->ep_num]); } + spin_unlock_irqrestore(&udc->lock, flags); + return 0; en_done: return -EINVAL; @@ -595,6 +641,7 @@ static int mv_ep_disable(struct usb_ep *_ep) struct mv_ep *ep; struct mv_dqh *dqh; u32 bit_pos, epctrlx, direction; + unsigned long flags; ep = container_of(_ep, struct mv_ep, ep); if ((_ep == NULL) || !ep->desc) @@ -605,6 +652,8 @@ static int mv_ep_disable(struct usb_ep *_ep) /* Get the endpoint queue head address */ dqh = ep->dqh; + spin_lock_irqsave(&udc->lock, flags); + direction = ep_dir(ep); bit_pos = 1 << ((direction == EP_DIR_OUT ? 0 : 16) + ep->ep_num); @@ -623,6 +672,9 @@ static int mv_ep_disable(struct usb_ep *_ep) ep->desc = NULL; ep->stopped = 1; + + spin_unlock_irqrestore(&udc->lock, flags); + return 0; } @@ -655,37 +707,28 @@ static void mv_ep_fifo_flush(struct usb_ep *_ep) { struct mv_udc *udc; u32 bit_pos, direction; - struct mv_ep *ep = container_of(_ep, struct mv_ep, ep); + struct mv_ep *ep; unsigned int loops; + if (!_ep) + return; + + ep = container_of(_ep, struct mv_ep, ep); + if (!ep->desc) + return; + udc = ep->udc; direction = ep_dir(ep); - bit_pos = 1 << ((direction == EP_DIR_OUT ? 0 : 16) + ep->ep_num); - /* - * Flushing will halt the pipe - * Write 1 to the Flush register - */ - writel(bit_pos, &udc->op_regs->epflush); - /* Wait until flushing completed */ - loops = LOOPS(FLUSH_TIMEOUT); - while (readl(&udc->op_regs->epflush) & bit_pos) { - /* - * ENDPTFLUSH bit should be cleared to indicate this - * operation is complete - */ - if (loops == 0) { - dev_err(&udc->dev->dev, - "TIMEOUT for ENDPTFLUSH=0x%x, bit_pos=0x%x\n", - (unsigned)readl(&udc->op_regs->epflush), - (unsigned)bit_pos); - return; - } - loops--; - udelay(LOOPS_USEC); - } + if (ep->ep_num == 0) + bit_pos = (1 << 16) | 1; + else if (direction == EP_DIR_OUT) + bit_pos = 1 << ep->ep_num; + else + bit_pos = 1 << (16 + ep->ep_num); + loops = LOOPS(EPSTATUS_TIMEOUT); - while (readl(&udc->op_regs->epstatus) & bit_pos) { + do { unsigned int inter_loops; if (loops == 0) { @@ -700,7 +743,7 @@ static void mv_ep_fifo_flush(struct usb_ep *_ep) /* Wait until flushing completed */ inter_loops = LOOPS(FLUSH_TIMEOUT); - while (readl(&udc->op_regs->epflush) & bit_pos) { + while (readl(&udc->op_regs->epflush)) { /* * ENDPTFLUSH bit should be cleared to indicate this * operation is complete @@ -717,7 +760,7 @@ static void mv_ep_fifo_flush(struct usb_ep *_ep) udelay(LOOPS_USEC); } loops--; - } + } while (readl(&udc->op_regs->epstatus) & bit_pos); } /* queues (submits) an I/O request to an endpoint */ @@ -987,6 +1030,22 @@ static struct usb_ep_ops mv_ep_ops = { .fifo_flush = mv_ep_fifo_flush, /* flush fifo */ }; +static void udc_clock_enable(struct mv_udc *udc) +{ + unsigned int i; + + for (i = 0; i < udc->clknum; i++) + clk_enable(udc->clk[i]); +} + +static void udc_clock_disable(struct mv_udc *udc) +{ + unsigned int i; + + for (i = 0; i < udc->clknum; i++) + clk_disable(udc->clk[i]); +} + static void udc_stop(struct mv_udc *udc) { u32 tmp; @@ -1075,6 +1134,40 @@ static int udc_reset(struct mv_udc *udc) return 0; } +static int mv_udc_enable(struct mv_udc *udc) +{ + int retval; + + if (udc->clock_gating == 0 || udc->active) + return 0; + + dev_dbg(&udc->dev->dev, "enable udc\n"); + udc_clock_enable(udc); + if (udc->pdata->phy_init) { + retval = udc->pdata->phy_init(udc->phy_regs); + if (retval) { + dev_err(&udc->dev->dev, + "init phy error %d\n", retval); + udc_clock_disable(udc); + return retval; + } + } + udc->active = 1; + + return 0; +} + +static void mv_udc_disable(struct mv_udc *udc) +{ + if (udc->clock_gating && udc->active) { + dev_dbg(&udc->dev->dev, "disable udc\n"); + if (udc->pdata->phy_deinit) + udc->pdata->phy_deinit(udc->phy_regs); + udc_clock_disable(udc); + udc->active = 0; + } +} + static int mv_udc_get_frame(struct usb_gadget *gadget) { struct mv_udc *udc; @@ -1110,22 +1203,68 @@ static int mv_udc_wakeup(struct usb_gadget *gadget) return 0; } +static int mv_udc_vbus_session(struct usb_gadget *gadget, int is_active) +{ + struct mv_udc *udc; + unsigned long flags; + int retval = 0; + + udc = container_of(gadget, struct mv_udc, gadget); + spin_lock_irqsave(&udc->lock, flags); + + dev_dbg(&udc->dev->dev, "%s: softconnect %d, vbus_active %d\n", + __func__, udc->softconnect, udc->vbus_active); + + udc->vbus_active = (is_active != 0); + if (udc->driver && udc->softconnect && udc->vbus_active) { + retval = mv_udc_enable(udc); + if (retval == 0) { + /* Clock is disabled, need re-init registers */ + udc_reset(udc); + ep0_reset(udc); + udc_start(udc); + } + } else if (udc->driver && udc->softconnect) { + /* stop all the transfer in queue*/ + stop_activity(udc, udc->driver); + udc_stop(udc); + mv_udc_disable(udc); + } + + spin_unlock_irqrestore(&udc->lock, flags); + return retval; +} + static int mv_udc_pullup(struct usb_gadget *gadget, int is_on) { struct mv_udc *udc; unsigned long flags; + int retval = 0; udc = container_of(gadget, struct mv_udc, gadget); spin_lock_irqsave(&udc->lock, flags); + dev_dbg(&udc->dev->dev, "%s: softconnect %d, vbus_active %d\n", + __func__, udc->softconnect, udc->vbus_active); + udc->softconnect = (is_on != 0); - if (udc->driver && udc->softconnect) - udc_start(udc); - else + if (udc->driver && udc->softconnect && udc->vbus_active) { + retval = mv_udc_enable(udc); + if (retval == 0) { + /* Clock is disabled, need re-init registers */ + udc_reset(udc); + ep0_reset(udc); + udc_start(udc); + } + } else if (udc->driver && udc->vbus_active) { + /* stop all the transfer in queue*/ + stop_activity(udc, udc->driver); udc_stop(udc); + mv_udc_disable(udc); + } spin_unlock_irqrestore(&udc->lock, flags); - return 0; + return retval; } static int mv_udc_start(struct usb_gadget_driver *driver, @@ -1140,17 +1279,15 @@ static const struct usb_gadget_ops mv_ops = { /* tries to wake up the host connected to this gadget */ .wakeup = mv_udc_wakeup, + /* notify controller that VBUS is powered or not */ + .vbus_session = mv_udc_vbus_session, + /* D+ pullup, software-controlled connect/disconnect to USB host */ .pullup = mv_udc_pullup, .start = mv_udc_start, .stop = mv_udc_stop, }; -static void mv_udc_testmode(struct mv_udc *udc, u16 index, bool enter) -{ - dev_info(&udc->dev->dev, "Test Mode is not support yet\n"); -} - static int eps_init(struct mv_udc *udc) { struct mv_ep *ep; @@ -1257,7 +1394,7 @@ static int mv_udc_start(struct usb_gadget_driver *driver, udc->usb_state = USB_STATE_ATTACHED; udc->ep0_state = WAIT_FOR_SETUP; - udc->ep0_dir = USB_DIR_OUT; + udc->ep0_dir = EP_DIR_OUT; spin_unlock_irqrestore(&udc->lock, flags); @@ -1269,9 +1406,13 @@ static int mv_udc_start(struct usb_gadget_driver *driver, udc->gadget.dev.driver = NULL; return retval; } - udc_reset(udc); - ep0_reset(udc); - udc_start(udc); + + /* pullup is always on */ + mv_udc_pullup(&udc->gadget, 1); + + /* When boot with cable attached, there will be no vbus irq occurred */ + if (udc->qwork) + queue_work(udc->qwork, &udc->vbus_work); return 0; } @@ -1284,13 +1425,16 @@ static int mv_udc_stop(struct usb_gadget_driver *driver) if (!udc) return -ENODEV; - udc_stop(udc); - spin_lock_irqsave(&udc->lock, flags); + mv_udc_enable(udc); + udc_stop(udc); + /* stop all usb activities */ udc->gadget.speed = USB_SPEED_UNKNOWN; stop_activity(udc, driver); + mv_udc_disable(udc); + spin_unlock_irqrestore(&udc->lock, flags); /* unbind gadget driver */ @@ -1301,6 +1445,31 @@ static int mv_udc_stop(struct usb_gadget_driver *driver) return 0; } +static void mv_set_ptc(struct mv_udc *udc, u32 mode) +{ + u32 portsc; + + portsc = readl(&udc->op_regs->portsc[0]); + portsc |= mode << 16; + writel(portsc, &udc->op_regs->portsc[0]); +} + +static void prime_status_complete(struct usb_ep *ep, struct usb_request *_req) +{ + struct mv_udc *udc = the_controller; + struct mv_req *req = container_of(_req, struct mv_req, req); + unsigned long flags; + + dev_info(&udc->dev->dev, "switch to test mode %d\n", req->test_mode); + + spin_lock_irqsave(&udc->lock, flags); + if (req->test_mode) { + mv_set_ptc(udc, req->test_mode); + req->test_mode = 0; + } + spin_unlock_irqrestore(&udc->lock, flags); +} + static int udc_prime_status(struct mv_udc *udc, u8 direction, u16 status, bool empty) { @@ -1310,6 +1479,7 @@ udc_prime_status(struct mv_udc *udc, u8 direction, u16 status, bool empty) ep = &udc->eps[0]; udc->ep0_dir = direction; + udc->ep0_state = WAIT_FOR_OUT_STATUS; req = udc->status_req; @@ -1323,9 +1493,21 @@ udc_prime_status(struct mv_udc *udc, u8 direction, u16 status, bool empty) req->ep = ep; req->req.status = -EINPROGRESS; req->req.actual = 0; - req->req.complete = NULL; + if (udc->test_mode) { + req->req.complete = prime_status_complete; + req->test_mode = udc->test_mode; + udc->test_mode = 0; + } else + req->req.complete = NULL; req->dtd_count = 0; + if (req->req.dma == DMA_ADDR_INVALID) { + req->req.dma = dma_map_single(ep->udc->gadget.dev.parent, + req->req.buf, req->req.length, + ep_dir(ep) ? DMA_TO_DEVICE : DMA_FROM_DEVICE); + req->mapped = 1; + } + /* prime the data phase */ if (!req_to_dtd(req)) retval = queue_dtd(ep, req); @@ -1346,6 +1528,17 @@ out: return retval; } +static void mv_udc_testmode(struct mv_udc *udc, u16 index) +{ + if (index <= TEST_FORCE_EN) { + udc->test_mode = index; + if (udc_prime_status(udc, EP_DIR_IN, 0, true)) + ep0_stall(udc); + } else + dev_err(&udc->dev->dev, + "This test mode(%d) is not supported\n", index); +} + static void ch9setaddress(struct mv_udc *udc, struct usb_ctrlrequest *setup) { udc->dev_addr = (u8)setup->wValue; @@ -1360,7 +1553,7 @@ static void ch9setaddress(struct mv_udc *udc, struct usb_ctrlrequest *setup) static void ch9getstatus(struct mv_udc *udc, u8 ep_num, struct usb_ctrlrequest *setup) { - u16 status; + u16 status = 0; int retval; if ((setup->bRequestType & (USB_DIR_IN | USB_TYPE_MASK)) @@ -1388,6 +1581,8 @@ static void ch9getstatus(struct mv_udc *udc, u8 ep_num, retval = udc_prime_status(udc, EP_DIR_IN, status, false); if (retval) ep0_stall(udc); + else + udc->ep0_state = DATA_STATE_XMIT; } static void ch9clearfeature(struct mv_udc *udc, struct usb_ctrlrequest *setup) @@ -1402,9 +1597,6 @@ static void ch9clearfeature(struct mv_udc *udc, struct usb_ctrlrequest *setup) case USB_DEVICE_REMOTE_WAKEUP: udc->remote_wakeup = 0; break; - case USB_DEVICE_TEST_MODE: - mv_udc_testmode(udc, 0, false); - break; default: goto out; } @@ -1433,8 +1625,6 @@ static void ch9clearfeature(struct mv_udc *udc, struct usb_ctrlrequest *setup) if (udc_prime_status(udc, EP_DIR_IN, 0, true)) ep0_stall(udc); - else - udc->ep0_state = DATA_STATE_XMIT; out: return; } @@ -1452,16 +1642,16 @@ static void ch9setfeature(struct mv_udc *udc, struct usb_ctrlrequest *setup) break; case USB_DEVICE_TEST_MODE: if (setup->wIndex & 0xFF - && udc->gadget.speed != USB_SPEED_HIGH) - goto out; - if (udc->usb_state == USB_STATE_CONFIGURED - || udc->usb_state == USB_STATE_ADDRESS - || udc->usb_state == USB_STATE_DEFAULT) - mv_udc_testmode(udc, - setup->wIndex & 0xFF00, true); - else - goto out; - break; + || udc->gadget.speed != USB_SPEED_HIGH) + ep0_stall(udc); + + if (udc->usb_state != USB_STATE_CONFIGURED + && udc->usb_state != USB_STATE_ADDRESS + && udc->usb_state != USB_STATE_DEFAULT) + ep0_stall(udc); + + mv_udc_testmode(udc, (setup->wIndex >> 8)); + goto out; default: goto out; } @@ -1599,8 +1789,7 @@ static void get_setup_data(struct mv_udc *udc, u8 ep_num, u8 *buffer_ptr) dqh = &udc->ep_dqh[ep_num * 2 + EP_DIR_OUT]; /* Clear bit in ENDPTSETUPSTAT */ - temp = readl(&udc->op_regs->epsetupstat); - writel(temp | (1 << ep_num), &udc->op_regs->epsetupstat); + writel((1 << ep_num), &udc->op_regs->epsetupstat); /* while a hazard exists when setup package arrives */ do { @@ -1871,23 +2060,57 @@ static irqreturn_t mv_udc_irq(int irq, void *dev) return IRQ_HANDLED; } +static irqreturn_t mv_udc_vbus_irq(int irq, void *dev) +{ + struct mv_udc *udc = (struct mv_udc *)dev; + + /* polling VBUS and init phy may cause too much time*/ + if (udc->qwork) + queue_work(udc->qwork, &udc->vbus_work); + + return IRQ_HANDLED; +} + +static void mv_udc_vbus_work(struct work_struct *work) +{ + struct mv_udc *udc; + unsigned int vbus; + + udc = container_of(work, struct mv_udc, vbus_work); + if (!udc->pdata->vbus) + return; + + vbus = udc->pdata->vbus->poll(); + dev_info(&udc->dev->dev, "vbus is %d\n", vbus); + + if (vbus == VBUS_HIGH) + mv_udc_vbus_session(&udc->gadget, 1); + else if (vbus == VBUS_LOW) + mv_udc_vbus_session(&udc->gadget, 0); +} + /* release device structure */ static void gadget_release(struct device *_dev) { struct mv_udc *udc = the_controller; complete(udc->done); - kfree(udc); } -static int mv_udc_remove(struct platform_device *dev) +static int __devexit mv_udc_remove(struct platform_device *dev) { struct mv_udc *udc = the_controller; - DECLARE_COMPLETION(done); + int clk_i; usb_del_gadget_udc(&udc->gadget); - udc->done = &done; + if (udc->qwork) { + flush_workqueue(udc->qwork); + destroy_workqueue(udc->qwork); + } + + if (udc->pdata && udc->pdata->vbus && udc->clock_gating) + free_irq(udc->pdata->vbus->irq, &dev->dev); /* free memory allocated in probe */ if (udc->dtd_pool) @@ -1902,6 +2125,8 @@ static int mv_udc_remove(struct platform_device *dev) if (udc->irq) free_irq(udc->irq, &dev->dev); + mv_udc_disable(udc); + if (udc->cap_regs) iounmap(udc->cap_regs); udc->cap_regs = NULL; @@ -1915,45 +2140,62 @@ static int mv_udc_remove(struct platform_device *dev) kfree(udc->status_req); } + for (clk_i = 0; clk_i <= udc->clknum; clk_i++) + clk_put(udc->clk[clk_i]); + device_unregister(&udc->gadget.dev); /* free dev, wait for the release() finished */ - wait_for_completion(&done); + wait_for_completion(udc->done); + kfree(udc); the_controller = NULL; return 0; } -int mv_udc_probe(struct platform_device *dev) +static int __devinit mv_udc_probe(struct platform_device *dev) { + struct mv_usb_platform_data *pdata = dev->dev.platform_data; struct mv_udc *udc; int retval = 0; + int clk_i = 0; struct resource *r; size_t size; - udc = kzalloc(sizeof *udc, GFP_KERNEL); + if (pdata == NULL) { + dev_err(&dev->dev, "missing platform_data\n"); + return -ENODEV; + } + + size = sizeof(*udc) + sizeof(struct clk *) * pdata->clknum; + udc = kzalloc(size, GFP_KERNEL); if (udc == NULL) { dev_err(&dev->dev, "failed to allocate memory for udc\n"); - retval = -ENOMEM; - goto error; + return -ENOMEM; } + the_controller = udc; + udc->done = &release_done; + udc->pdata = dev->dev.platform_data; spin_lock_init(&udc->lock); udc->dev = dev; - udc->clk = clk_get(&dev->dev, "U2OCLK"); - if (IS_ERR(udc->clk)) { - retval = PTR_ERR(udc->clk); - goto error; + udc->clknum = pdata->clknum; + for (clk_i = 0; clk_i < udc->clknum; clk_i++) { + udc->clk[clk_i] = clk_get(&dev->dev, pdata->clkname[clk_i]); + if (IS_ERR(udc->clk[clk_i])) { + retval = PTR_ERR(udc->clk[clk_i]); + goto err_put_clk; + } } - r = platform_get_resource_byname(udc->dev, IORESOURCE_MEM, "u2o"); + r = platform_get_resource_byname(udc->dev, IORESOURCE_MEM, "capregs"); if (r == NULL) { dev_err(&dev->dev, "no I/O memory resource defined\n"); retval = -ENODEV; - goto error; + goto err_put_clk; } udc->cap_regs = (struct mv_cap_regs __iomem *) @@ -1961,29 +2203,31 @@ int mv_udc_probe(struct platform_device *dev) if (udc->cap_regs == NULL) { dev_err(&dev->dev, "failed to map I/O memory\n"); retval = -EBUSY; - goto error; + goto err_put_clk; } - r = platform_get_resource_byname(udc->dev, IORESOURCE_MEM, "u2ophy"); + r = platform_get_resource_byname(udc->dev, IORESOURCE_MEM, "phyregs"); if (r == NULL) { dev_err(&dev->dev, "no phy I/O memory resource defined\n"); retval = -ENODEV; - goto error; + goto err_iounmap_capreg; } udc->phy_regs = (unsigned int)ioremap(r->start, resource_size(r)); if (udc->phy_regs == 0) { dev_err(&dev->dev, "failed to map phy I/O memory\n"); retval = -EBUSY; - goto error; + goto err_iounmap_capreg; } /* we will acces controller register, so enable the clk */ - clk_enable(udc->clk); - retval = mv_udc_phy_init(udc->phy_regs); - if (retval) { - dev_err(&dev->dev, "phy initialization error %d\n", retval); - goto error; + udc_clock_enable(udc); + if (pdata->phy_init) { + retval = pdata->phy_init(udc->phy_regs); + if (retval) { + dev_err(&dev->dev, "phy init error %d\n", retval); + goto err_iounmap_phyreg; + } } udc->op_regs = (struct mv_op_regs __iomem *)((u32)udc->cap_regs @@ -1991,6 +2235,13 @@ int mv_udc_probe(struct platform_device *dev) & CAPLENGTH_MASK)); udc->max_eps = readl(&udc->cap_regs->dccparams) & DCCPARAMS_DEN_MASK; + /* + * some platform will use usb to download image, it may not disconnect + * usb gadget before loading kernel. So first stop udc here. + */ + udc_stop(udc); + writel(0xFFFFFFFF, &udc->op_regs->usbsts); + size = udc->max_eps * sizeof(struct mv_dqh) *2; size = (size + DQH_ALIGNMENT - 1) & ~(DQH_ALIGNMENT - 1); udc->ep_dqh = dma_alloc_coherent(&dev->dev, size, @@ -1999,7 +2250,7 @@ int mv_udc_probe(struct platform_device *dev) if (udc->ep_dqh == NULL) { dev_err(&dev->dev, "allocate dQH memory failed\n"); retval = -ENOMEM; - goto error; + goto err_disable_clock; } udc->ep_dqh_size = size; @@ -2012,7 +2263,7 @@ int mv_udc_probe(struct platform_device *dev) if (!udc->dtd_pool) { retval = -ENOMEM; - goto error; + goto err_free_dma; } size = udc->max_eps * sizeof(struct mv_ep) *2; @@ -2020,7 +2271,7 @@ int mv_udc_probe(struct platform_device *dev) if (udc->eps == NULL) { dev_err(&dev->dev, "allocate ep memory failed\n"); retval = -ENOMEM; - goto error; + goto err_destroy_dma; } /* initialize ep0 status request structure */ @@ -2028,13 +2279,13 @@ int mv_udc_probe(struct platform_device *dev) if (!udc->status_req) { dev_err(&dev->dev, "allocate status_req memory failed\n"); retval = -ENOMEM; - goto error; + goto err_free_eps; } INIT_LIST_HEAD(&udc->status_req->queue); /* allocate a small amount of memory to get valid address */ udc->status_req->req.buf = kzalloc(8, GFP_KERNEL); - udc->status_req->req.dma = virt_to_phys(udc->status_req->req.buf); + udc->status_req->req.dma = DMA_ADDR_INVALID; udc->resume_state = USB_STATE_NOTATTACHED; udc->usb_state = USB_STATE_POWERED; @@ -2045,15 +2296,15 @@ int mv_udc_probe(struct platform_device *dev) if (r == NULL) { dev_err(&dev->dev, "no IRQ resource defined\n"); retval = -ENODEV; - goto error; + goto err_free_status_req; } udc->irq = r->start; if (request_irq(udc->irq, mv_udc_irq, - IRQF_DISABLED | IRQF_SHARED, driver_name, udc)) { + IRQF_SHARED, driver_name, udc)) { dev_err(&dev->dev, "Request irq %d for UDC failed\n", udc->irq); retval = -ENODEV; - goto error; + goto err_free_status_req; } /* initialize gadget structure */ @@ -2072,18 +2323,82 @@ int mv_udc_probe(struct platform_device *dev) retval = device_register(&udc->gadget.dev); if (retval) - goto error; + goto err_free_irq; eps_init(udc); - the_controller = udc; + /* VBUS detect: we can disable/enable clock on demand.*/ + if (pdata->vbus) { + udc->clock_gating = 1; + retval = request_threaded_irq(pdata->vbus->irq, NULL, + mv_udc_vbus_irq, IRQF_ONESHOT, "vbus", udc); + if (retval) { + dev_info(&dev->dev, + "Can not request irq for VBUS, " + "disable clock gating\n"); + udc->clock_gating = 0; + } + + udc->qwork = create_singlethread_workqueue("mv_udc_queue"); + if (!udc->qwork) { + dev_err(&dev->dev, "cannot create workqueue\n"); + retval = -ENOMEM; + goto err_unregister; + } + + INIT_WORK(&udc->vbus_work, mv_udc_vbus_work); + } + + /* + * When clock gating is supported, we can disable clk and phy. + * If not, it means that VBUS detection is not supported, we + * have to enable vbus active all the time to let controller work. + */ + if (udc->clock_gating) { + if (udc->pdata->phy_deinit) + udc->pdata->phy_deinit(udc->phy_regs); + udc_clock_disable(udc); + } else + udc->vbus_active = 1; retval = usb_add_gadget_udc(&dev->dev, &udc->gadget); - if (!retval) - return retval; -error: - if (udc) - mv_udc_remove(udc->dev); + if (retval) + goto err_unregister; + + dev_info(&dev->dev, "successful probe UDC device %s clock gating.\n", + udc->clock_gating ? "with" : "without"); + + return 0; + +err_unregister: + if (udc->pdata && udc->pdata->vbus && udc->clock_gating) + free_irq(pdata->vbus->irq, &dev->dev); + device_unregister(&udc->gadget.dev); +err_free_irq: + free_irq(udc->irq, &dev->dev); +err_free_status_req: + kfree(udc->status_req->req.buf); + kfree(udc->status_req); +err_free_eps: + kfree(udc->eps); +err_destroy_dma: + dma_pool_destroy(udc->dtd_pool); +err_free_dma: + dma_free_coherent(&dev->dev, udc->ep_dqh_size, + udc->ep_dqh, udc->ep_dqh_dma); +err_disable_clock: + if (udc->pdata->phy_deinit) + udc->pdata->phy_deinit(udc->phy_regs); + udc_clock_disable(udc); +err_iounmap_phyreg: + iounmap((void *)udc->phy_regs); +err_iounmap_capreg: + iounmap(udc->cap_regs); +err_put_clk: + for (clk_i--; clk_i >= 0; clk_i--) + clk_put(udc->clk[clk_i]); + the_controller = NULL; + kfree(udc); return retval; } @@ -2102,11 +2417,16 @@ static int mv_udc_resume(struct device *_dev) struct mv_udc *udc = the_controller; int retval; - retval = mv_udc_phy_init(udc->phy_regs); - if (retval) { - dev_err(_dev, "phy initialization error %d\n", retval); - return retval; + if (udc->pdata->phy_init) { + retval = udc->pdata->phy_init(udc->phy_regs); + if (retval) { + dev_err(&udc->dev->dev, + "init phy error %d when resume back\n", + retval); + return retval; + } } + udc_reset(udc); ep0_reset(udc); udc_start(udc); @@ -2120,9 +2440,21 @@ static const struct dev_pm_ops mv_udc_pm_ops = { }; #endif +static void mv_udc_shutdown(struct platform_device *dev) +{ + struct mv_udc *udc = the_controller; + u32 mode; + + /* reset controller mode to IDLE */ + mode = readl(&udc->op_regs->usbmode); + mode &= ~3; + writel(mode, &udc->op_regs->usbmode); +} + static struct platform_driver udc_driver = { .probe = mv_udc_probe, .remove = __exit_p(mv_udc_remove), + .shutdown = mv_udc_shutdown, .driver = { .owner = THIS_MODULE, .name = "pxa-u2o", diff --git a/drivers/usb/gadget/mv_udc_phy.c b/drivers/usb/gadget/mv_udc_phy.c deleted file mode 100644 index d4dea97e38a5..000000000000 --- a/drivers/usb/gadget/mv_udc_phy.c +++ /dev/null @@ -1,214 +0,0 @@ -#include <linux/delay.h> -#include <linux/timer.h> -#include <linux/io.h> -#include <linux/errno.h> - -#include <mach/cputype.h> - -#ifdef CONFIG_ARCH_MMP - -#define UTMI_REVISION 0x0 -#define UTMI_CTRL 0x4 -#define UTMI_PLL 0x8 -#define UTMI_TX 0xc -#define UTMI_RX 0x10 -#define UTMI_IVREF 0x14 -#define UTMI_T0 0x18 -#define UTMI_T1 0x1c -#define UTMI_T2 0x20 -#define UTMI_T3 0x24 -#define UTMI_T4 0x28 -#define UTMI_T5 0x2c -#define UTMI_RESERVE 0x30 -#define UTMI_USB_INT 0x34 -#define UTMI_DBG_CTL 0x38 -#define UTMI_OTG_ADDON 0x3c - -/* For UTMICTRL Register */ -#define UTMI_CTRL_USB_CLK_EN (1 << 31) -/* pxa168 */ -#define UTMI_CTRL_SUSPEND_SET1 (1 << 30) -#define UTMI_CTRL_SUSPEND_SET2 (1 << 29) -#define UTMI_CTRL_RXBUF_PDWN (1 << 24) -#define UTMI_CTRL_TXBUF_PDWN (1 << 11) - -#define UTMI_CTRL_INPKT_DELAY_SHIFT 30 -#define UTMI_CTRL_INPKT_DELAY_SOF_SHIFT 28 -#define UTMI_CTRL_PU_REF_SHIFT 20 -#define UTMI_CTRL_ARC_PULLDN_SHIFT 12 -#define UTMI_CTRL_PLL_PWR_UP_SHIFT 1 -#define UTMI_CTRL_PWR_UP_SHIFT 0 -/* For UTMI_PLL Register */ -#define UTMI_PLL_CLK_BLK_EN_SHIFT 24 -#define UTMI_PLL_FBDIV_SHIFT 4 -#define UTMI_PLL_REFDIV_SHIFT 0 -#define UTMI_PLL_FBDIV_MASK 0x00000FF0 -#define UTMI_PLL_REFDIV_MASK 0x0000000F -#define UTMI_PLL_ICP_MASK 0x00007000 -#define UTMI_PLL_KVCO_MASK 0x00031000 -#define UTMI_PLL_PLLCALI12_SHIFT 29 -#define UTMI_PLL_PLLCALI12_MASK (0x3 << 29) -#define UTMI_PLL_PLLVDD18_SHIFT 27 -#define UTMI_PLL_PLLVDD18_MASK (0x3 << 27) -#define UTMI_PLL_PLLVDD12_SHIFT 25 -#define UTMI_PLL_PLLVDD12_MASK (0x3 << 25) -#define UTMI_PLL_KVCO_SHIFT 15 -#define UTMI_PLL_ICP_SHIFT 12 -/* For UTMI_TX Register */ -#define UTMI_TX_REG_EXT_FS_RCAL_SHIFT 27 -#define UTMI_TX_REG_EXT_FS_RCAL_MASK (0xf << 27) -#define UTMI_TX_REG_EXT_FS_RCAL_EN_MASK 26 -#define UTMI_TX_REG_EXT_FS_RCAL_EN (0x1 << 26) -#define UTMI_TX_LOW_VDD_EN_SHIFT 11 -#define UTMI_TX_IMPCAL_VTH_SHIFT 14 -#define UTMI_TX_IMPCAL_VTH_MASK (0x7 << 14) -#define UTMI_TX_CK60_PHSEL_SHIFT 17 -#define UTMI_TX_CK60_PHSEL_MASK (0xf << 17) -#define UTMI_TX_TXVDD12_SHIFT 22 -#define UTMI_TX_TXVDD12_MASK (0x3 << 22) -#define UTMI_TX_AMP_SHIFT 0 -#define UTMI_TX_AMP_MASK (0x7 << 0) -/* For UTMI_RX Register */ -#define UTMI_RX_SQ_THRESH_SHIFT 4 -#define UTMI_RX_SQ_THRESH_MASK (0xf << 4) -#define UTMI_REG_SQ_LENGTH_SHIFT 15 -#define UTMI_REG_SQ_LENGTH_MASK (0x3 << 15) - -#define REG_RCAL_START 0x00001000 -#define VCOCAL_START 0x00200000 -#define KVCO_EXT 0x00400000 -#define PLL_READY 0x00800000 -#define CLK_BLK_EN 0x01000000 -#endif - -static unsigned int u2o_read(unsigned int base, unsigned int offset) -{ - return readl(base + offset); -} - -static void u2o_set(unsigned int base, unsigned int offset, unsigned int value) -{ - unsigned int reg; - - reg = readl(base + offset); - reg |= value; - writel(reg, base + offset); - readl(base + offset); -} - -static void u2o_clear(unsigned int base, unsigned int offset, - unsigned int value) -{ - unsigned int reg; - - reg = readl(base + offset); - reg &= ~value; - writel(reg, base + offset); - readl(base + offset); -} - -static void u2o_write(unsigned int base, unsigned int offset, - unsigned int value) -{ - writel(value, base + offset); - readl(base + offset); -} - -#ifdef CONFIG_ARCH_MMP -int mv_udc_phy_init(unsigned int base) -{ - unsigned long timeout; - - /* Initialize the USB PHY power */ - if (cpu_is_pxa910()) { - u2o_set(base, UTMI_CTRL, (1 << UTMI_CTRL_INPKT_DELAY_SOF_SHIFT) - | (1 << UTMI_CTRL_PU_REF_SHIFT)); - } - - u2o_set(base, UTMI_CTRL, 1 << UTMI_CTRL_PLL_PWR_UP_SHIFT); - u2o_set(base, UTMI_CTRL, 1 << UTMI_CTRL_PWR_UP_SHIFT); - - /* UTMI_PLL settings */ - u2o_clear(base, UTMI_PLL, UTMI_PLL_PLLVDD18_MASK - | UTMI_PLL_PLLVDD12_MASK | UTMI_PLL_PLLCALI12_MASK - | UTMI_PLL_FBDIV_MASK | UTMI_PLL_REFDIV_MASK - | UTMI_PLL_ICP_MASK | UTMI_PLL_KVCO_MASK); - - u2o_set(base, UTMI_PLL, (0xee << UTMI_PLL_FBDIV_SHIFT) - | (0xb << UTMI_PLL_REFDIV_SHIFT) - | (3 << UTMI_PLL_PLLVDD18_SHIFT) - | (3 << UTMI_PLL_PLLVDD12_SHIFT) - | (3 << UTMI_PLL_PLLCALI12_SHIFT) - | (1 << UTMI_PLL_ICP_SHIFT) | (3 << UTMI_PLL_KVCO_SHIFT)); - - /* UTMI_TX */ - u2o_clear(base, UTMI_TX, UTMI_TX_REG_EXT_FS_RCAL_EN_MASK - | UTMI_TX_TXVDD12_MASK - | UTMI_TX_CK60_PHSEL_MASK | UTMI_TX_IMPCAL_VTH_MASK - | UTMI_TX_REG_EXT_FS_RCAL_MASK | UTMI_TX_AMP_MASK); - u2o_set(base, UTMI_TX, (3 << UTMI_TX_TXVDD12_SHIFT) - | (4 << UTMI_TX_CK60_PHSEL_SHIFT) - | (4 << UTMI_TX_IMPCAL_VTH_SHIFT) - | (8 << UTMI_TX_REG_EXT_FS_RCAL_SHIFT) - | (3 << UTMI_TX_AMP_SHIFT)); - - /* UTMI_RX */ - u2o_clear(base, UTMI_RX, UTMI_RX_SQ_THRESH_MASK - | UTMI_REG_SQ_LENGTH_MASK); - if (cpu_is_pxa168()) - u2o_set(base, UTMI_RX, (7 << UTMI_RX_SQ_THRESH_SHIFT) - | (2 << UTMI_REG_SQ_LENGTH_SHIFT)); - else - u2o_set(base, UTMI_RX, (0x7 << UTMI_RX_SQ_THRESH_SHIFT) - | (2 << UTMI_REG_SQ_LENGTH_SHIFT)); - - /* UTMI_IVREF */ - if (cpu_is_pxa168()) - /* - * fixing Microsoft Altair board interface with NEC hub issue - - * Set UTMI_IVREF from 0x4a3 to 0x4bf - */ - u2o_write(base, UTMI_IVREF, 0x4bf); - - /* calibrate */ - timeout = jiffies + 100; - while ((u2o_read(base, UTMI_PLL) & PLL_READY) == 0) { - if (time_after(jiffies, timeout)) - return -ETIME; - cpu_relax(); - } - - /* toggle VCOCAL_START bit of UTMI_PLL */ - udelay(200); - u2o_set(base, UTMI_PLL, VCOCAL_START); - udelay(40); - u2o_clear(base, UTMI_PLL, VCOCAL_START); - - /* toggle REG_RCAL_START bit of UTMI_TX */ - udelay(200); - u2o_set(base, UTMI_TX, REG_RCAL_START); - udelay(40); - u2o_clear(base, UTMI_TX, REG_RCAL_START); - udelay(200); - - /* make sure phy is ready */ - timeout = jiffies + 100; - while ((u2o_read(base, UTMI_PLL) & PLL_READY) == 0) { - if (time_after(jiffies, timeout)) - return -ETIME; - cpu_relax(); - } - - if (cpu_is_pxa168()) { - u2o_set(base, UTMI_RESERVE, 1 << 5); - /* Turn on UTMI PHY OTG extension */ - u2o_write(base, UTMI_OTG_ADDON, 1); - } - return 0; -} -#else -int mv_udc_phy_init(unsigned int base) -{ - return 0; -} -#endif diff --git a/drivers/usb/gadget/ncm.c b/drivers/usb/gadget/ncm.c index 62ee5087dcac..89530034dff1 100644 --- a/drivers/usb/gadget/ncm.c +++ b/drivers/usb/gadget/ncm.c @@ -14,15 +14,6 @@ * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ /* #define DEBUG */ diff --git a/drivers/usb/gadget/ndis.h b/drivers/usb/gadget/ndis.h index df886cec5ef4..b0e52fc277b4 100644 --- a/drivers/usb/gadget/ndis.h +++ b/drivers/usb/gadget/ndis.h @@ -10,12 +10,6 @@ * * This source code is offered for use in the public domain. You may * use, modify or distribute it freely. - * - * This code is distributed in the hope that it will be useful but - * WITHOUT ANY WARRANTY. ALL WARRANTIES, EXPRESS OR IMPLIED ARE HEREBY - * DISCLAIMED. This includes but is not limited to warranties of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. - * */ #ifndef _LINUX_NDIS_H diff --git a/drivers/usb/gadget/net2272.c b/drivers/usb/gadget/net2272.c index ab98ea926a11..d1b76368472f 100644 --- a/drivers/usb/gadget/net2272.c +++ b/drivers/usb/gadget/net2272.c @@ -204,7 +204,7 @@ net2272_enable(struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc) if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN) return -ESHUTDOWN; - max = le16_to_cpu(desc->wMaxPacketSize) & 0x1fff; + max = usb_endpoint_maxp(desc) & 0x1fff; spin_lock_irqsave(&dev->lock, flags); _ep->maxpacket = max & 0x7fff; @@ -1172,17 +1172,18 @@ net2272_pullup(struct usb_gadget *_gadget, int is_on) return 0; } -static int net2272_start(struct usb_gadget_driver *driver, - int (*bind)(struct usb_gadget *)); -static int net2272_stop(struct usb_gadget_driver *driver); +static int net2272_start(struct usb_gadget *_gadget, + struct usb_gadget_driver *driver); +static int net2272_stop(struct usb_gadget *_gadget, + struct usb_gadget_driver *driver); static const struct usb_gadget_ops net2272_ops = { - .get_frame = net2272_get_frame, - .wakeup = net2272_wakeup, + .get_frame = net2272_get_frame, + .wakeup = net2272_wakeup, .set_selfpowered = net2272_set_selfpowered, - .pullup = net2272_pullup, - .start = net2272_start, - .stop = net2272_stop, + .pullup = net2272_pullup, + .udc_start = net2272_start, + .udc_stop = net2272_stop, }; /*---------------------------------------------------------------------------*/ @@ -1356,8 +1357,6 @@ net2272_set_fifo_mode(struct net2272 *dev, int mode) /*---------------------------------------------------------------------------*/ -static struct net2272 *the_controller; - static void net2272_usb_reset(struct net2272 *dev) { @@ -1453,20 +1452,17 @@ net2272_ep0_start(struct net2272 *dev) * disconnect is reported. then a host may connect again, or * the driver might get unbound. */ -static int net2272_start(struct usb_gadget_driver *driver, - int (*bind)(struct usb_gadget *)) +static int net2272_start(struct usb_gadget *_gadget, + struct usb_gadget_driver *driver) { - struct net2272 *dev = the_controller; - int ret; + struct net2272 *dev; unsigned i; - if (!driver || !bind || !driver->unbind || !driver->setup || + if (!driver || !driver->unbind || !driver->setup || driver->speed != USB_SPEED_HIGH) return -EINVAL; - if (!dev) - return -ENODEV; - if (dev->driver) - return -EBUSY; + + dev = container_of(_gadget, struct net2272, gadget); for (i = 0; i < 4; ++i) dev->ep[i].irqs = 0; @@ -1475,14 +1471,6 @@ static int net2272_start(struct usb_gadget_driver *driver, driver->driver.bus = NULL; dev->driver = driver; dev->gadget.dev.driver = &driver->driver; - ret = bind(&dev->gadget); - if (ret) { - dev_dbg(dev->dev, "bind to driver %s --> %d\n", - driver->driver.name, ret); - dev->driver = NULL; - dev->gadget.dev.driver = NULL; - return ret; - } /* ... then enable host detection and ep0; and we're ready * for set_configuration as well as eventual disconnect. @@ -1510,33 +1498,21 @@ stop_activity(struct net2272 *dev, struct usb_gadget_driver *driver) for (i = 0; i < 4; ++i) net2272_dequeue_all(&dev->ep[i]); - /* report disconnect; the driver is already quiesced */ - if (driver) { - spin_unlock(&dev->lock); - driver->disconnect(&dev->gadget); - spin_lock(&dev->lock); - - } net2272_usb_reinit(dev); } -static int net2272_stop(struct usb_gadget_driver *driver) +static int net2272_stop(struct usb_gadget *_gadget, + struct usb_gadget_driver *driver) { - struct net2272 *dev = the_controller; + struct net2272 *dev; unsigned long flags; - if (!dev) - return -ENODEV; - if (!driver || driver != dev->driver) - return -EINVAL; + dev = container_of(_gadget, struct net2272, gadget); spin_lock_irqsave(&dev->lock, flags); stop_activity(dev, driver); spin_unlock_irqrestore(&dev->lock, flags); - net2272_pullup(&dev->gadget, 0); - - driver->unbind(&dev->gadget); dev->gadget.dev.driver = NULL; dev->driver = NULL; @@ -1764,8 +1740,8 @@ net2272_handle_stat0_irqs(struct net2272 *dev, u8 stat) dev->gadget.speed = USB_SPEED_HIGH; else dev->gadget.speed = USB_SPEED_FULL; - dev_dbg(dev->dev, "%s speed\n", - (dev->gadget.speed == USB_SPEED_HIGH) ? "high" : "full"); + dev_dbg(dev->dev, "%s\n", + usb_speed_string(dev->gadget.speed)); } ep = &dev->ep[0]; @@ -2238,7 +2214,6 @@ net2272_remove(struct net2272 *dev) device_remove_file(dev->dev, &dev_attr_registers); dev_info(dev->dev, "unbind\n"); - the_controller = NULL; } static struct net2272 * __devinit @@ -2246,11 +2221,6 @@ net2272_probe_init(struct device *dev, unsigned int irq) { struct net2272 *ret; - if (the_controller) { - dev_warn(dev, "ignoring\n"); - return ERR_PTR(-EBUSY); - } - if (!irq) { dev_dbg(dev, "No IRQ!\n"); return ERR_PTR(-ENODEV); @@ -2307,8 +2277,6 @@ net2272_probe_fin(struct net2272 *dev, unsigned int irqflags) dma_mode_string()); dev_info(dev->dev, "version: %s\n", driver_vers); - the_controller = dev; - ret = device_register(&dev->gadget.dev); if (ret) goto err_irq; @@ -2684,8 +2652,6 @@ net2272_plat_probe(struct platform_device *pdev) dev_info(&pdev->dev, "running in 16-bit, %sbyte swap local bus mode\n", (net2272_read(dev, LOCCTL) & (1 << BYTE_SWAP)) ? "" : "no "); - the_controller = dev; - return 0; err_io: diff --git a/drivers/usb/gadget/net2280.c b/drivers/usb/gadget/net2280.c index 3dd40b4e675c..7f1bc9a73cda 100644 --- a/drivers/usb/gadget/net2280.c +++ b/drivers/usb/gadget/net2280.c @@ -33,15 +33,6 @@ * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #undef DEBUG /* messages on error and most fault paths */ @@ -169,7 +160,7 @@ net2280_enable (struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc) return -EDOM; /* sanity check ep-e/ep-f since their fifos are small */ - max = le16_to_cpu (desc->wMaxPacketSize) & 0x1fff; + max = usb_endpoint_maxp (desc) & 0x1fff; if (ep->num > 4 && max > 64) return -ERANGE; @@ -1410,17 +1401,18 @@ static int net2280_pullup(struct usb_gadget *_gadget, int is_on) return 0; } -static int net2280_start(struct usb_gadget_driver *driver, - int (*bind)(struct usb_gadget *)); -static int net2280_stop(struct usb_gadget_driver *driver); +static int net2280_start(struct usb_gadget *_gadget, + struct usb_gadget_driver *driver); +static int net2280_stop(struct usb_gadget *_gadget, + struct usb_gadget_driver *driver); static const struct usb_gadget_ops net2280_ops = { .get_frame = net2280_get_frame, .wakeup = net2280_wakeup, .set_selfpowered = net2280_set_selfpowered, .pullup = net2280_pullup, - .start = net2280_start, - .stop = net2280_stop, + .udc_start = net2280_start, + .udc_stop = net2280_stop, }; /*-------------------------------------------------------------------------*/ @@ -1640,7 +1632,7 @@ show_queues (struct device *_dev, struct device_attribute *attr, char *buf) default: val = "iso"; break; }; val; }), - le16_to_cpu (d->wMaxPacketSize) & 0x1fff, + usb_endpoint_maxp (d) & 0x1fff, ep->dma ? "dma" : "pio", ep->fifo_size ); } else /* ep0 should only have one transfer queued */ @@ -1753,8 +1745,6 @@ static void set_fifo_mode (struct net2280 *dev, int mode) * perhaps to bind specific drivers to specific devices. */ -static struct net2280 *the_controller; - static void usb_reset (struct net2280 *dev) { u32 tmp; @@ -1880,10 +1870,10 @@ static void ep0_start (struct net2280 *dev) * disconnect is reported. then a host may connect again, or * the driver might get unbound. */ -static int net2280_start(struct usb_gadget_driver *driver, - int (*bind)(struct usb_gadget *)) +static int net2280_start(struct usb_gadget *_gadget, + struct usb_gadget_driver *driver) { - struct net2280 *dev = the_controller; + struct net2280 *dev; int retval; unsigned i; @@ -1891,14 +1881,11 @@ static int net2280_start(struct usb_gadget_driver *driver, * (dev->usb->xcvrdiag & FORCE_FULL_SPEED_MODE) * "must not be used in normal operation" */ - if (!driver - || driver->speed != USB_SPEED_HIGH - || !bind || !driver->setup) + if (!driver || driver->speed != USB_SPEED_HIGH + || !driver->setup) return -EINVAL; - if (!dev) - return -ENODEV; - if (dev->driver) - return -EBUSY; + + dev = container_of (_gadget, struct net2280, gadget); for (i = 0; i < 7; i++) dev->ep [i].irqs = 0; @@ -1908,14 +1895,6 @@ static int net2280_start(struct usb_gadget_driver *driver, driver->driver.bus = NULL; dev->driver = driver; dev->gadget.dev.driver = &driver->driver; - retval = bind(&dev->gadget); - if (retval) { - DEBUG (dev, "bind to driver %s --> %d\n", - driver->driver.name, retval); - dev->driver = NULL; - dev->gadget.dev.driver = NULL; - return retval; - } retval = device_create_file (&dev->pdev->dev, &dev_attr_function); if (retval) goto err_unbind; @@ -1961,33 +1940,21 @@ stop_activity (struct net2280 *dev, struct usb_gadget_driver *driver) for (i = 0; i < 7; i++) nuke (&dev->ep [i]); - /* report disconnect; the driver is already quiesced */ - if (driver) { - spin_unlock (&dev->lock); - driver->disconnect (&dev->gadget); - spin_lock (&dev->lock); - } - usb_reinit (dev); } -static int net2280_stop(struct usb_gadget_driver *driver) +static int net2280_stop(struct usb_gadget *_gadget, + struct usb_gadget_driver *driver) { - struct net2280 *dev = the_controller; + struct net2280 *dev; unsigned long flags; - if (!dev) - return -ENODEV; - if (!driver || driver != dev->driver || !driver->unbind) - return -EINVAL; + dev = container_of (_gadget, struct net2280, gadget); spin_lock_irqsave (&dev->lock, flags); stop_activity (dev, driver); spin_unlock_irqrestore (&dev->lock, flags); - net2280_pullup (&dev->gadget, 0); - - driver->unbind (&dev->gadget); dev->gadget.dev.driver = NULL; dev->driver = NULL; @@ -2266,9 +2233,7 @@ static void handle_stat0_irqs (struct net2280 *dev, u32 stat) else dev->gadget.speed = USB_SPEED_FULL; net2280_led_speed (dev, dev->gadget.speed); - DEBUG (dev, "%s speed\n", - (dev->gadget.speed == USB_SPEED_HIGH) - ? "high" : "full"); + DEBUG(dev, "%s\n", usb_speed_string(dev->gadget.speed)); } ep = &dev->ep [0]; @@ -2481,7 +2446,7 @@ static void handle_stat1_irqs (struct net2280 *dev, u32 stat) mask = (1 << HIGH_SPEED) | (1 << FULL_SPEED); /* VBUS disconnect is indicated by VBUS_PIN and VBUS_INTERRUPT set. - * Root Port Reset is indicated by ROOT_PORT_RESET_INTERRRUPT set and + * Root Port Reset is indicated by ROOT_PORT_RESET_INTERRUPT set and * both HIGH_SPEED and FULL_SPEED clear (as ROOT_PORT_RESET_INTERRUPT * only indicates a change in the reset state). */ @@ -2709,8 +2674,6 @@ static void net2280_remove (struct pci_dev *pdev) pci_set_drvdata (pdev, NULL); INFO (dev, "unbind\n"); - - the_controller = NULL; } /* wrap this driver around the specified device, but @@ -2724,14 +2687,6 @@ static int net2280_probe (struct pci_dev *pdev, const struct pci_device_id *id) void __iomem *base = NULL; int retval, i; - /* if you want to support more than one controller in a system, - * usb_gadget_driver_{register,unregister}() must change. - */ - if (the_controller) { - dev_warn (&pdev->dev, "ignoring\n"); - return -EBUSY; - } - /* alloc, and start init */ dev = kzalloc (sizeof *dev, GFP_KERNEL); if (dev == NULL){ @@ -2858,8 +2813,6 @@ static int net2280_probe (struct pci_dev *pdev, const struct pci_device_id *id) use_dma ? (use_dma_chaining ? "chaining" : "enabled") : "disabled"); - the_controller = dev; - retval = device_register (&dev->gadget.dev); if (retval) goto done; retval = device_create_file (&pdev->dev, &dev_attr_registers); diff --git a/drivers/usb/gadget/net2280.h b/drivers/usb/gadget/net2280.h index c36852263d93..a844be0d683a 100644 --- a/drivers/usb/gadget/net2280.h +++ b/drivers/usb/gadget/net2280.h @@ -11,15 +11,6 @@ * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include <linux/usb/net2280.h> diff --git a/drivers/usb/gadget/omap_udc.c b/drivers/usb/gadget/omap_udc.c index 740c7daed279..788989a10223 100644 --- a/drivers/usb/gadget/omap_udc.c +++ b/drivers/usb/gadget/omap_udc.c @@ -10,15 +10,6 @@ * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #undef DEBUG @@ -166,15 +157,14 @@ static int omap_ep_enable(struct usb_ep *_ep, if (!_ep || !desc || ep->desc || desc->bDescriptorType != USB_DT_ENDPOINT || ep->bEndpointAddress != desc->bEndpointAddress - || ep->maxpacket < le16_to_cpu - (desc->wMaxPacketSize)) { + || ep->maxpacket < usb_endpoint_maxp(desc)) { DBG("%s, bad ep or descriptor\n", __func__); return -EINVAL; } - maxp = le16_to_cpu (desc->wMaxPacketSize); + maxp = usb_endpoint_maxp(desc); if ((desc->bmAttributes == USB_ENDPOINT_XFER_BULK && maxp != ep->maxpacket) - || le16_to_cpu(desc->wMaxPacketSize) > ep->maxpacket + || usb_endpoint_maxp(desc) > ep->maxpacket || !desc->wMaxPacketSize) { DBG("%s, bad %s maxpacket\n", __func__, _ep->name); return -ERANGE; @@ -2968,7 +2958,7 @@ known: } #ifdef USE_ISO status = request_irq(pdev->resource[3].start, omap_udc_iso_irq, - IRQF_DISABLED, "omap_udc iso", udc); + 0, "omap_udc iso", udc); if (status != 0) { ERR("can't get irq %d, err %d\n", (int) pdev->resource[3].start, status); diff --git a/drivers/usb/gadget/pch_udc.c b/drivers/usb/gadget/pch_udc.c index f96615ab6b77..550d6dcdf104 100644 --- a/drivers/usb/gadget/pch_udc.c +++ b/drivers/usb/gadget/pch_udc.c @@ -4,15 +4,6 @@ * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. */ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt #include <linux/kernel.h> @@ -947,7 +938,7 @@ static void pch_udc_ep_enable(struct pch_udc_ep *ep, else buff_size = UDC_EPOUT_BUFF_SIZE; pch_udc_ep_set_bufsz(ep, buff_size, ep->in); - pch_udc_ep_set_maxpkt(ep, le16_to_cpu(desc->wMaxPacketSize)); + pch_udc_ep_set_maxpkt(ep, usb_endpoint_maxp(desc)); pch_udc_ep_set_nak(ep); pch_udc_ep_fifo_flush(ep, ep->in); /* Configure the endpoint */ @@ -957,7 +948,7 @@ static void pch_udc_ep_enable(struct pch_udc_ep *ep, (cfg->cur_cfg << UDC_CSR_NE_CFG_SHIFT) | (cfg->cur_intf << UDC_CSR_NE_INTF_SHIFT) | (cfg->cur_alt << UDC_CSR_NE_ALT_SHIFT) | - le16_to_cpu(desc->wMaxPacketSize) << UDC_CSR_NE_MAX_PKT_SHIFT; + usb_endpoint_maxp(desc) << UDC_CSR_NE_MAX_PKT_SHIFT; if (ep->in) pch_udc_write_csr(ep->dev, val, UDC_EPIN_IDX(ep->num)); @@ -1466,7 +1457,7 @@ static int pch_udc_pcd_ep_enable(struct usb_ep *usbep, ep->desc = desc; ep->halted = 0; pch_udc_ep_enable(ep, &ep->dev->cfg_data, desc); - ep->ep.maxpacket = le16_to_cpu(desc->wMaxPacketSize); + ep->ep.maxpacket = usb_endpoint_maxp(desc); pch_udc_enable_ep_interrupts(ep->dev, PCH_UDC_EPINT(ep->in, ep->num)); spin_unlock_irqrestore(&dev->lock, iflags); return 0; diff --git a/drivers/usb/gadget/printer.c b/drivers/usb/gadget/printer.c index a341dde6f9c3..65a8834f274b 100644 --- a/drivers/usb/gadget/printer.c +++ b/drivers/usb/gadget/printer.c @@ -8,15 +8,6 @@ * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include <linux/module.h> @@ -971,23 +962,15 @@ printer_set_config(struct printer_dev *dev, unsigned number) usb_gadget_vbus_draw(dev->gadget, dev->gadget->is_otg ? 8 : 100); } else { - char *speed; unsigned power; power = 2 * config_desc.bMaxPower; usb_gadget_vbus_draw(dev->gadget, power); - switch (gadget->speed) { - case USB_SPEED_FULL: speed = "full"; break; -#ifdef CONFIG_USB_GADGET_DUALSPEED - case USB_SPEED_HIGH: speed = "high"; break; -#endif - default: speed = "?"; break; - } - dev->config = number; - INFO(dev, "%s speed config #%d: %d mA, %s\n", - speed, number, power, driver_desc); + INFO(dev, "%s config #%d: %d mA, %s\n", + usb_speed_string(gadget->speed), + number, power, driver_desc); } return result; } @@ -1611,7 +1594,7 @@ cleanup(void) if (status) ERROR(dev, "usb_gadget_unregister_driver %x\n", status); - unregister_chrdev_region(g_printer_devno, 2); + unregister_chrdev_region(g_printer_devno, 1); class_destroy(usb_gadget_class); mutex_unlock(&usb_printer_gadget.lock_printer_io); } diff --git a/drivers/usb/gadget/pxa25x_udc.c b/drivers/usb/gadget/pxa25x_udc.c index e4e59b4de25d..c090a7e3ecf8 100644 --- a/drivers/usb/gadget/pxa25x_udc.c +++ b/drivers/usb/gadget/pxa25x_udc.c @@ -11,16 +11,6 @@ * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * */ /* #define VERBOSE_DEBUG */ @@ -232,8 +222,7 @@ static int pxa25x_ep_enable (struct usb_ep *_ep, if (!_ep || !desc || ep->desc || _ep->name == ep0name || desc->bDescriptorType != USB_DT_ENDPOINT || ep->bEndpointAddress != desc->bEndpointAddress - || ep->fifo_size < le16_to_cpu - (desc->wMaxPacketSize)) { + || ep->fifo_size < usb_endpoint_maxp (desc)) { DMSG("%s, bad ep or descriptor\n", __func__); return -EINVAL; } @@ -248,7 +237,7 @@ static int pxa25x_ep_enable (struct usb_ep *_ep, /* hardware _could_ do smaller, but driver doesn't */ if ((desc->bmAttributes == USB_ENDPOINT_XFER_BULK - && le16_to_cpu (desc->wMaxPacketSize) + && usb_endpoint_maxp (desc) != BULK_FIFO_SIZE) || !desc->wMaxPacketSize) { DMSG("%s, bad %s maxpacket\n", __func__, _ep->name); @@ -264,7 +253,7 @@ static int pxa25x_ep_enable (struct usb_ep *_ep, ep->desc = desc; ep->stopped = 0; ep->pio_irqs = 0; - ep->ep.maxpacket = le16_to_cpu (desc->wMaxPacketSize); + ep->ep.maxpacket = usb_endpoint_maxp (desc); /* flush fifo (mostly for OUT buffers) */ pxa25x_ep_fifo_flush (_ep); @@ -401,7 +390,7 @@ write_fifo (struct pxa25x_ep *ep, struct pxa25x_request *req) { unsigned max; - max = le16_to_cpu(ep->desc->wMaxPacketSize); + max = usb_endpoint_maxp(ep->desc); do { unsigned count; int is_last, is_short; @@ -671,8 +660,7 @@ pxa25x_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags) * we can report per-packet status. that also helps with dma. */ if (unlikely (ep->bmAttributes == USB_ENDPOINT_XFER_ISOC - && req->req.length > le16_to_cpu - (ep->desc->wMaxPacketSize))) + && req->req.length > usb_endpoint_maxp (ep->desc))) return -EMSGSIZE; DBG(DBG_NOISY, "%s queue req %p, len %d buf %p\n", @@ -1105,7 +1093,7 @@ udc_seq_show(struct seq_file *m, void *_d) tmp = *dev->ep [i].reg_udccs; seq_printf(m, "%s max %d %s udccs %02x irqs %lu\n", - ep->ep.name, le16_to_cpu(desc->wMaxPacketSize), + ep->ep.name, usb_endpoint_maxp(desc), "pio", tmp, ep->pio_irqs); /* TODO translate all five groups of udccs bits! */ @@ -2202,7 +2190,7 @@ static int __init pxa25x_udc_probe(struct platform_device *pdev) /* irq setup after old hardware state is cleaned up */ retval = request_irq(irq, pxa25x_udc_irq, - IRQF_DISABLED, driver_name, dev); + 0, driver_name, dev); if (retval != 0) { pr_err("%s: can't get irq %d, err %d\n", driver_name, irq, retval); @@ -2214,7 +2202,7 @@ static int __init pxa25x_udc_probe(struct platform_device *pdev) if (machine_is_lubbock()) { retval = request_irq(LUBBOCK_USB_DISC_IRQ, lubbock_vbus_irq, - IRQF_DISABLED | IRQF_SAMPLE_RANDOM, + IRQF_SAMPLE_RANDOM, driver_name, dev); if (retval != 0) { pr_err("%s: can't get irq %i, err %d\n", @@ -2223,7 +2211,7 @@ static int __init pxa25x_udc_probe(struct platform_device *pdev) } retval = request_irq(LUBBOCK_USB_IRQ, lubbock_vbus_irq, - IRQF_DISABLED | IRQF_SAMPLE_RANDOM, + IRQF_SAMPLE_RANDOM, driver_name, dev); if (retval != 0) { pr_err("%s: can't get irq %i, err %d\n", diff --git a/drivers/usb/gadget/pxa25x_udc.h b/drivers/usb/gadget/pxa25x_udc.h index f572c5617462..8eaf4e43726b 100644 --- a/drivers/usb/gadget/pxa25x_udc.h +++ b/drivers/usb/gadget/pxa25x_udc.h @@ -9,15 +9,6 @@ * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #ifndef __LINUX_USB_GADGET_PXA25X_H @@ -161,8 +152,6 @@ static struct pxa25x_udc *the_controller; #ifdef DEBUG -static int is_vbus_present(void); - static const char *state_name[] = { "EP0_IDLE", "EP0_IN_DATA_PHASE", "EP0_OUT_DATA_PHASE", @@ -214,8 +203,7 @@ dump_state(struct pxa25x_udc *dev) u32 tmp; unsigned i; - DMSG("%s %s, uicr %02X.%02X, usir %02X.%02x, ufnr %02X.%02X\n", - is_vbus_present() ? "host " : "disconnected", + DMSG("%s, uicr %02X.%02X, usir %02X.%02x, ufnr %02X.%02X\n", state_name[dev->ep0state], UICR1, UICR0, USIR1, USIR0, UFNRH, UFNRL); dump_udccr("udccr"); @@ -232,9 +220,6 @@ dump_state(struct pxa25x_udc *dev) } else DMSG("ep0 driver '%s'\n", dev->driver->driver.name); - if (!is_vbus_present()) - return; - dump_udccs0 ("udccs0"); DMSG("ep0 IN %lu/%lu, OUT %lu/%lu\n", dev->stats.write.bytes, dev->stats.write.ops, diff --git a/drivers/usb/gadget/pxa27x_udc.c b/drivers/usb/gadget/pxa27x_udc.c index 85b68c75dc9d..18b6b091f2a6 100644 --- a/drivers/usb/gadget/pxa27x_udc.c +++ b/drivers/usb/gadget/pxa27x_udc.c @@ -8,16 +8,6 @@ * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * */ #include <linux/module.h> #include <linux/kernel.h> @@ -1439,7 +1429,7 @@ static int pxa_ep_enable(struct usb_ep *_ep, return -EINVAL; } - if (ep->fifo_size < le16_to_cpu(desc->wMaxPacketSize)) { + if (ep->fifo_size < usb_endpoint_maxp(desc)) { ep_err(ep, "bad maxpacket\n"); return -ERANGE; } diff --git a/drivers/usb/gadget/pxa27x_udc.h b/drivers/usb/gadget/pxa27x_udc.h index b01696eab068..7f4e8f424e80 100644 --- a/drivers/usb/gadget/pxa27x_udc.h +++ b/drivers/usb/gadget/pxa27x_udc.h @@ -9,15 +9,6 @@ * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #ifndef __LINUX_USB_GADGET_PXA27X_H diff --git a/drivers/usb/gadget/r8a66597-udc.c b/drivers/usb/gadget/r8a66597-udc.c index 50991e5bd5e8..68a826a1b866 100644 --- a/drivers/usb/gadget/r8a66597-udc.c +++ b/drivers/usb/gadget/r8a66597-udc.c @@ -8,16 +8,6 @@ * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - * */ #include <linux/module.h> @@ -28,13 +18,14 @@ #include <linux/clk.h> #include <linux/err.h> #include <linux/slab.h> +#include <linux/dma-mapping.h> #include <linux/usb/ch9.h> #include <linux/usb/gadget.h> #include "r8a66597-udc.h" -#define DRIVER_VERSION "2009-08-18" +#define DRIVER_VERSION "2011-09-26" static const char udc_name[] = "r8a66597_udc"; static const char *r8a66597_ep_name[] = { @@ -115,13 +106,15 @@ static inline u16 control_reg_get_pid(struct r8a66597 *r8a66597, u16 pipenum) u16 pid = 0; unsigned long offset; - if (pipenum == 0) + if (pipenum == 0) { pid = r8a66597_read(r8a66597, DCPCTR) & PID; - else if (pipenum < R8A66597_MAX_NUM_PIPE) { + } else if (pipenum < R8A66597_MAX_NUM_PIPE) { offset = get_pipectr_addr(pipenum); pid = r8a66597_read(r8a66597, offset) & PID; - } else - printk(KERN_ERR "unexpect pipe num (%d)\n", pipenum); + } else { + dev_err(r8a66597_to_dev(r8a66597), "unexpect pipe num (%d)\n", + pipenum); + } return pid; } @@ -131,13 +124,15 @@ static inline void control_reg_set_pid(struct r8a66597 *r8a66597, u16 pipenum, { unsigned long offset; - if (pipenum == 0) + if (pipenum == 0) { r8a66597_mdfy(r8a66597, pid, PID, DCPCTR); - else if (pipenum < R8A66597_MAX_NUM_PIPE) { + } else if (pipenum < R8A66597_MAX_NUM_PIPE) { offset = get_pipectr_addr(pipenum); r8a66597_mdfy(r8a66597, pid, PID, offset); - } else - printk(KERN_ERR "unexpect pipe num (%d)\n", pipenum); + } else { + dev_err(r8a66597_to_dev(r8a66597), "unexpect pipe num (%d)\n", + pipenum); + } } static inline void pipe_start(struct r8a66597 *r8a66597, u16 pipenum) @@ -160,13 +155,15 @@ static inline u16 control_reg_get(struct r8a66597 *r8a66597, u16 pipenum) u16 ret = 0; unsigned long offset; - if (pipenum == 0) + if (pipenum == 0) { ret = r8a66597_read(r8a66597, DCPCTR); - else if (pipenum < R8A66597_MAX_NUM_PIPE) { + } else if (pipenum < R8A66597_MAX_NUM_PIPE) { offset = get_pipectr_addr(pipenum); ret = r8a66597_read(r8a66597, offset); - } else - printk(KERN_ERR "unexpect pipe num (%d)\n", pipenum); + } else { + dev_err(r8a66597_to_dev(r8a66597), "unexpect pipe num (%d)\n", + pipenum); + } return ret; } @@ -177,13 +174,63 @@ static inline void control_reg_sqclr(struct r8a66597 *r8a66597, u16 pipenum) pipe_stop(r8a66597, pipenum); - if (pipenum == 0) + if (pipenum == 0) { r8a66597_bset(r8a66597, SQCLR, DCPCTR); - else if (pipenum < R8A66597_MAX_NUM_PIPE) { + } else if (pipenum < R8A66597_MAX_NUM_PIPE) { offset = get_pipectr_addr(pipenum); r8a66597_bset(r8a66597, SQCLR, offset); - } else - printk(KERN_ERR "unexpect pipe num(%d)\n", pipenum); + } else { + dev_err(r8a66597_to_dev(r8a66597), "unexpect pipe num (%d)\n", + pipenum); + } +} + +static void control_reg_sqset(struct r8a66597 *r8a66597, u16 pipenum) +{ + unsigned long offset; + + pipe_stop(r8a66597, pipenum); + + if (pipenum == 0) { + r8a66597_bset(r8a66597, SQSET, DCPCTR); + } else if (pipenum < R8A66597_MAX_NUM_PIPE) { + offset = get_pipectr_addr(pipenum); + r8a66597_bset(r8a66597, SQSET, offset); + } else { + dev_err(r8a66597_to_dev(r8a66597), + "unexpect pipe num(%d)\n", pipenum); + } +} + +static u16 control_reg_sqmon(struct r8a66597 *r8a66597, u16 pipenum) +{ + unsigned long offset; + + if (pipenum == 0) { + return r8a66597_read(r8a66597, DCPCTR) & SQMON; + } else if (pipenum < R8A66597_MAX_NUM_PIPE) { + offset = get_pipectr_addr(pipenum); + return r8a66597_read(r8a66597, offset) & SQMON; + } else { + dev_err(r8a66597_to_dev(r8a66597), + "unexpect pipe num(%d)\n", pipenum); + } + + return 0; +} + +static u16 save_usb_toggle(struct r8a66597 *r8a66597, u16 pipenum) +{ + return control_reg_sqmon(r8a66597, pipenum); +} + +static void restore_usb_toggle(struct r8a66597 *r8a66597, u16 pipenum, + u16 toggle) +{ + if (toggle) + control_reg_sqset(r8a66597, pipenum); + else + control_reg_sqclr(r8a66597, pipenum); } static inline int get_buffer_size(struct r8a66597 *r8a66597, u16 pipenum) @@ -222,18 +269,51 @@ static inline unsigned short mbw_value(struct r8a66597 *r8a66597) return MBW_16; } +static void r8a66597_change_curpipe(struct r8a66597 *r8a66597, u16 pipenum, + u16 isel, u16 fifosel) +{ + u16 tmp, mask, loop; + int i = 0; + + if (!pipenum) { + mask = ISEL | CURPIPE; + loop = isel; + } else { + mask = CURPIPE; + loop = pipenum; + } + r8a66597_mdfy(r8a66597, loop, mask, fifosel); + + do { + tmp = r8a66597_read(r8a66597, fifosel); + if (i++ > 1000000) { + dev_err(r8a66597_to_dev(r8a66597), + "r8a66597: register%x, loop %x " + "is timeout\n", fifosel, loop); + break; + } + ndelay(1); + } while ((tmp & mask) != loop); +} + static inline void pipe_change(struct r8a66597 *r8a66597, u16 pipenum) { struct r8a66597_ep *ep = r8a66597->pipenum2ep[pipenum]; if (ep->use_dma) - return; + r8a66597_bclr(r8a66597, DREQE, ep->fifosel); r8a66597_mdfy(r8a66597, pipenum, CURPIPE, ep->fifosel); ndelay(450); - r8a66597_bset(r8a66597, mbw_value(r8a66597), ep->fifosel); + if (r8a66597_is_sudmac(r8a66597) && ep->use_dma) + r8a66597_bclr(r8a66597, mbw_value(r8a66597), ep->fifosel); + else + r8a66597_bset(r8a66597, mbw_value(r8a66597), ep->fifosel); + + if (ep->use_dma) + r8a66597_bset(r8a66597, DREQE, ep->fifosel); } static int pipe_buffer_setting(struct r8a66597 *r8a66597, @@ -297,17 +377,18 @@ static void pipe_buffer_release(struct r8a66597 *r8a66597, if (info->pipe == 0) return; - if (is_bulk_pipe(info->pipe)) + if (is_bulk_pipe(info->pipe)) { r8a66597->bulk--; - else if (is_interrupt_pipe(info->pipe)) + } else if (is_interrupt_pipe(info->pipe)) { r8a66597->interrupt--; - else if (is_isoc_pipe(info->pipe)) { + } else if (is_isoc_pipe(info->pipe)) { r8a66597->isochronous--; if (info->type == R8A66597_BULK) r8a66597->bulk--; - } else - printk(KERN_ERR "ep_release: unexpect pipenum (%d)\n", - info->pipe); + } else { + dev_err(r8a66597_to_dev(r8a66597), + "ep_release: unexpect pipenum (%d)\n", info->pipe); + } } static void pipe_initialize(struct r8a66597_ep *ep) @@ -337,11 +418,17 @@ static void r8a66597_ep_setting(struct r8a66597 *r8a66597, ep->fifoaddr = CFIFO; ep->fifosel = CFIFOSEL; ep->fifoctr = CFIFOCTR; - ep->fifotrn = 0; ep->pipectr = get_pipectr_addr(pipenum); + if (is_bulk_pipe(pipenum) || is_isoc_pipe(pipenum)) { + ep->pipetre = get_pipetre_addr(pipenum); + ep->pipetrn = get_pipetrn_addr(pipenum); + } else { + ep->pipetre = 0; + ep->pipetrn = 0; + } ep->pipenum = pipenum; - ep->ep.maxpacket = le16_to_cpu(desc->wMaxPacketSize); + ep->ep.maxpacket = usb_endpoint_maxp(desc); r8a66597->pipenum2ep[pipenum] = ep; r8a66597->epaddr2ep[desc->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK] = ep; @@ -381,7 +468,8 @@ static int alloc_pipe_config(struct r8a66597_ep *ep, case USB_ENDPOINT_XFER_BULK: if (r8a66597->bulk >= R8A66597_MAX_NUM_BULK) { if (r8a66597->isochronous >= R8A66597_MAX_NUM_ISOC) { - printk(KERN_ERR "bulk pipe is insufficient\n"); + dev_err(r8a66597_to_dev(r8a66597), + "bulk pipe is insufficient\n"); return -ENODEV; } else { info.pipe = R8A66597_BASE_PIPENUM_ISOC @@ -397,7 +485,8 @@ static int alloc_pipe_config(struct r8a66597_ep *ep, break; case USB_ENDPOINT_XFER_INT: if (r8a66597->interrupt >= R8A66597_MAX_NUM_INT) { - printk(KERN_ERR "interrupt pipe is insufficient\n"); + dev_err(r8a66597_to_dev(r8a66597), + "interrupt pipe is insufficient\n"); return -ENODEV; } info.pipe = R8A66597_BASE_PIPENUM_INT + r8a66597->interrupt; @@ -406,7 +495,8 @@ static int alloc_pipe_config(struct r8a66597_ep *ep, break; case USB_ENDPOINT_XFER_ISOC: if (r8a66597->isochronous >= R8A66597_MAX_NUM_ISOC) { - printk(KERN_ERR "isochronous pipe is insufficient\n"); + dev_err(r8a66597_to_dev(r8a66597), + "isochronous pipe is insufficient\n"); return -ENODEV; } info.pipe = R8A66597_BASE_PIPENUM_ISOC + r8a66597->isochronous; @@ -414,13 +504,13 @@ static int alloc_pipe_config(struct r8a66597_ep *ep, counter = &r8a66597->isochronous; break; default: - printk(KERN_ERR "unexpect xfer type\n"); + dev_err(r8a66597_to_dev(r8a66597), "unexpect xfer type\n"); return -EINVAL; } ep->type = info.type; info.epnum = desc->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK; - info.maxpacket = le16_to_cpu(desc->wMaxPacketSize); + info.maxpacket = usb_endpoint_maxp(desc); info.interval = desc->bInterval; if (desc->bEndpointAddress & USB_ENDPOINT_DIR_MASK) info.dir_in = 1; @@ -429,7 +519,8 @@ static int alloc_pipe_config(struct r8a66597_ep *ep, ret = pipe_buffer_setting(r8a66597, &info); if (ret < 0) { - printk(KERN_ERR "pipe_buffer_setting fail\n"); + dev_err(r8a66597_to_dev(r8a66597), + "pipe_buffer_setting fail\n"); return ret; } @@ -495,6 +586,124 @@ static void start_ep0_write(struct r8a66597_ep *ep, } } +static void disable_fifosel(struct r8a66597 *r8a66597, u16 pipenum, + u16 fifosel) +{ + u16 tmp; + + tmp = r8a66597_read(r8a66597, fifosel) & CURPIPE; + if (tmp == pipenum) + r8a66597_change_curpipe(r8a66597, 0, 0, fifosel); +} + +static void change_bfre_mode(struct r8a66597 *r8a66597, u16 pipenum, + int enable) +{ + struct r8a66597_ep *ep = r8a66597->pipenum2ep[pipenum]; + u16 tmp, toggle; + + /* check current BFRE bit */ + r8a66597_write(r8a66597, pipenum, PIPESEL); + tmp = r8a66597_read(r8a66597, PIPECFG) & R8A66597_BFRE; + if ((enable && tmp) || (!enable && !tmp)) + return; + + /* change BFRE bit */ + pipe_stop(r8a66597, pipenum); + disable_fifosel(r8a66597, pipenum, CFIFOSEL); + disable_fifosel(r8a66597, pipenum, D0FIFOSEL); + disable_fifosel(r8a66597, pipenum, D1FIFOSEL); + + toggle = save_usb_toggle(r8a66597, pipenum); + + r8a66597_write(r8a66597, pipenum, PIPESEL); + if (enable) + r8a66597_bset(r8a66597, R8A66597_BFRE, PIPECFG); + else + r8a66597_bclr(r8a66597, R8A66597_BFRE, PIPECFG); + + /* initialize for internal BFRE flag */ + r8a66597_bset(r8a66597, ACLRM, ep->pipectr); + r8a66597_bclr(r8a66597, ACLRM, ep->pipectr); + + restore_usb_toggle(r8a66597, pipenum, toggle); +} + +static int sudmac_alloc_channel(struct r8a66597 *r8a66597, + struct r8a66597_ep *ep, + struct r8a66597_request *req) +{ + struct r8a66597_dma *dma; + + if (!r8a66597_is_sudmac(r8a66597)) + return -ENODEV; + + /* Check transfer type */ + if (!is_bulk_pipe(ep->pipenum)) + return -EIO; + + if (r8a66597->dma.used) + return -EBUSY; + + /* set SUDMAC parameters */ + dma = &r8a66597->dma; + dma->used = 1; + if (ep->desc->bEndpointAddress & USB_DIR_IN) { + dma->dir = 1; + } else { + dma->dir = 0; + change_bfre_mode(r8a66597, ep->pipenum, 1); + } + + /* set r8a66597_ep paramters */ + ep->use_dma = 1; + ep->dma = dma; + ep->fifoaddr = D0FIFO; + ep->fifosel = D0FIFOSEL; + ep->fifoctr = D0FIFOCTR; + + /* dma mapping */ + req->req.dma = dma_map_single(r8a66597_to_dev(ep->r8a66597), + req->req.buf, req->req.length, + dma->dir ? DMA_TO_DEVICE : DMA_FROM_DEVICE); + + return 0; +} + +static void sudmac_free_channel(struct r8a66597 *r8a66597, + struct r8a66597_ep *ep, + struct r8a66597_request *req) +{ + if (!r8a66597_is_sudmac(r8a66597)) + return; + + dma_unmap_single(r8a66597_to_dev(ep->r8a66597), + req->req.dma, req->req.length, + ep->dma->dir ? DMA_TO_DEVICE : DMA_FROM_DEVICE); + + r8a66597_bclr(r8a66597, DREQE, ep->fifosel); + r8a66597_change_curpipe(r8a66597, 0, 0, ep->fifosel); + + ep->dma->used = 0; + ep->use_dma = 0; + ep->fifoaddr = CFIFO; + ep->fifosel = CFIFOSEL; + ep->fifoctr = CFIFOCTR; +} + +static void sudmac_start(struct r8a66597 *r8a66597, struct r8a66597_ep *ep, + struct r8a66597_request *req) +{ + BUG_ON(req->req.length == 0); + + r8a66597_sudmac_write(r8a66597, LBA_WAIT, CH0CFG); + r8a66597_sudmac_write(r8a66597, req->req.dma, CH0BA); + r8a66597_sudmac_write(r8a66597, req->req.length, CH0BBC); + r8a66597_sudmac_write(r8a66597, CH0ENDE, DINTCTRL); + + r8a66597_sudmac_write(r8a66597, DEN, CH0DEN); +} + static void start_packet_write(struct r8a66597_ep *ep, struct r8a66597_request *req) { @@ -505,11 +714,29 @@ static void start_packet_write(struct r8a66597_ep *ep, disable_irq_empty(r8a66597, ep->pipenum); pipe_start(r8a66597, ep->pipenum); - tmp = r8a66597_read(r8a66597, ep->fifoctr); - if (unlikely((tmp & FRDY) == 0)) - pipe_irq_enable(r8a66597, ep->pipenum); - else - irq_packet_write(ep, req); + if (req->req.length == 0) { + transfer_complete(ep, req, 0); + } else { + r8a66597_write(r8a66597, ~(1 << ep->pipenum), BRDYSTS); + if (sudmac_alloc_channel(r8a66597, ep, req) < 0) { + /* PIO mode */ + pipe_change(r8a66597, ep->pipenum); + disable_irq_empty(r8a66597, ep->pipenum); + pipe_start(r8a66597, ep->pipenum); + tmp = r8a66597_read(r8a66597, ep->fifoctr); + if (unlikely((tmp & FRDY) == 0)) + pipe_irq_enable(r8a66597, ep->pipenum); + else + irq_packet_write(ep, req); + } else { + /* DMA mode */ + pipe_change(r8a66597, ep->pipenum); + disable_irq_nrdy(r8a66597, ep->pipenum); + pipe_start(r8a66597, ep->pipenum); + enable_irq_nrdy(r8a66597, ep->pipenum); + sudmac_start(r8a66597, ep, req); + } + } } static void start_packet_read(struct r8a66597_ep *ep, @@ -524,17 +751,26 @@ static void start_packet_read(struct r8a66597_ep *ep, pipe_start(r8a66597, pipenum); pipe_irq_enable(r8a66597, pipenum); } else { - if (ep->use_dma) { - r8a66597_bset(r8a66597, TRCLR, ep->fifosel); - pipe_change(r8a66597, pipenum); - r8a66597_bset(r8a66597, TRENB, ep->fifosel); + pipe_stop(r8a66597, pipenum); + if (ep->pipetre) { + enable_irq_nrdy(r8a66597, pipenum); + r8a66597_write(r8a66597, TRCLR, ep->pipetre); r8a66597_write(r8a66597, - (req->req.length + ep->ep.maxpacket - 1) - / ep->ep.maxpacket, - ep->fifotrn); + DIV_ROUND_UP(req->req.length, ep->ep.maxpacket), + ep->pipetrn); + r8a66597_bset(r8a66597, TRENB, ep->pipetre); + } + + if (sudmac_alloc_channel(r8a66597, ep, req) < 0) { + /* PIO mode */ + change_bfre_mode(r8a66597, ep->pipenum, 0); + pipe_start(r8a66597, pipenum); /* trigger once */ + pipe_irq_enable(r8a66597, pipenum); + } else { + pipe_change(r8a66597, pipenum); + sudmac_start(r8a66597, ep, req); + pipe_start(r8a66597, pipenum); /* trigger once */ } - pipe_start(r8a66597, pipenum); /* trigger once */ - pipe_irq_enable(r8a66597, pipenum); } } @@ -564,7 +800,8 @@ static void start_ep0(struct r8a66597_ep *ep, struct r8a66597_request *req) control_end(ep->r8a66597, 0); break; default: - printk(KERN_ERR "start_ep0: unexpect ctsq(%x)\n", ctsq); + dev_err(r8a66597_to_dev(ep->r8a66597), + "start_ep0: unexpect ctsq(%x)\n", ctsq); break; } } @@ -690,6 +927,9 @@ __acquires(r8a66597->lock) if (!list_empty(&ep->queue)) restart = 1; + if (ep->use_dma) + sudmac_free_channel(ep->r8a66597, ep, req); + spin_unlock(&ep->r8a66597->lock); req->req.complete(&ep->ep, &req->req); spin_lock(&ep->r8a66597->lock); @@ -718,7 +958,8 @@ static void irq_ep0_write(struct r8a66597_ep *ep, struct r8a66597_request *req) do { tmp = r8a66597_read(r8a66597, ep->fifoctr); if (i++ > 100000) { - printk(KERN_ERR "pipe0 is busy. maybe cpu i/o bus" + dev_err(r8a66597_to_dev(r8a66597), + "pipe0 is busy. maybe cpu i/o bus " "conflict. please power off this controller."); return; } @@ -733,7 +974,7 @@ static void irq_ep0_write(struct r8a66597_ep *ep, struct r8a66597_request *req) /* write fifo */ if (req->req.buf) { if (size > 0) - r8a66597_write_fifo(r8a66597, ep->fifoaddr, buf, size); + r8a66597_write_fifo(r8a66597, ep, buf, size); if ((size == 0) || ((size % ep->ep.maxpacket) != 0)) r8a66597_bset(r8a66597, BVAL, ep->fifoctr); } @@ -769,7 +1010,8 @@ static void irq_packet_write(struct r8a66597_ep *ep, if (unlikely((tmp & FRDY) == 0)) { pipe_stop(r8a66597, pipenum); pipe_irq_disable(r8a66597, pipenum); - printk(KERN_ERR "write fifo not ready. pipnum=%d\n", pipenum); + dev_err(r8a66597_to_dev(r8a66597), + "write fifo not ready. pipnum=%d\n", pipenum); return; } @@ -780,7 +1022,7 @@ static void irq_packet_write(struct r8a66597_ep *ep, /* write fifo */ if (req->req.buf) { - r8a66597_write_fifo(r8a66597, ep->fifoaddr, buf, size); + r8a66597_write_fifo(r8a66597, ep, buf, size); if ((size == 0) || ((size % ep->ep.maxpacket) != 0) || ((bufsize != ep->ep.maxpacket) @@ -819,7 +1061,7 @@ static void irq_packet_read(struct r8a66597_ep *ep, req->req.status = -EPIPE; pipe_stop(r8a66597, pipenum); pipe_irq_disable(r8a66597, pipenum); - printk(KERN_ERR "read fifo not ready"); + dev_err(r8a66597_to_dev(r8a66597), "read fifo not ready"); return; } @@ -1095,7 +1337,7 @@ static void r8a66597_update_usb_speed(struct r8a66597 *r8a66597) break; default: r8a66597->gadget.speed = USB_SPEED_UNKNOWN; - printk(KERN_ERR "USB speed unknown\n"); + dev_err(r8a66597_to_dev(r8a66597), "USB speed unknown\n"); } } @@ -1158,11 +1400,71 @@ __acquires(r8a66597->lock) control_end(r8a66597, 0); break; default: - printk(KERN_ERR "ctrl_stage: unexpect ctsq(%x)\n", ctsq); + dev_err(r8a66597_to_dev(r8a66597), + "ctrl_stage: unexpect ctsq(%x)\n", ctsq); break; } } +static void sudmac_finish(struct r8a66597 *r8a66597, struct r8a66597_ep *ep) +{ + u16 pipenum; + struct r8a66597_request *req; + u32 len; + int i = 0; + + pipenum = ep->pipenum; + pipe_change(r8a66597, pipenum); + + while (!(r8a66597_read(r8a66597, ep->fifoctr) & FRDY)) { + udelay(1); + if (unlikely(i++ >= 10000)) { /* timeout = 10 msec */ + dev_err(r8a66597_to_dev(r8a66597), + "%s: FRDY was not set (%d)\n", + __func__, pipenum); + return; + } + } + + r8a66597_bset(r8a66597, BCLR, ep->fifoctr); + req = get_request_from_ep(ep); + + /* prepare parameters */ + len = r8a66597_sudmac_read(r8a66597, CH0CBC); + req->req.actual += len; + + /* clear */ + r8a66597_sudmac_write(r8a66597, CH0STCLR, DSTSCLR); + + /* check transfer finish */ + if ((!req->req.zero && (req->req.actual == req->req.length)) + || (len % ep->ep.maxpacket)) { + if (ep->dma->dir) { + disable_irq_ready(r8a66597, pipenum); + enable_irq_empty(r8a66597, pipenum); + } else { + /* Clear the interrupt flag for next transfer */ + r8a66597_write(r8a66597, ~(1 << pipenum), BRDYSTS); + transfer_complete(ep, req, 0); + } + } +} + +static void r8a66597_sudmac_irq(struct r8a66597 *r8a66597) +{ + u32 irqsts; + struct r8a66597_ep *ep; + u16 pipenum; + + irqsts = r8a66597_sudmac_read(r8a66597, DINTSTS); + if (irqsts & CH0ENDS) { + r8a66597_sudmac_write(r8a66597, CH0ENDC, DINTSTSCLR); + pipenum = (r8a66597_read(r8a66597, D0FIFOSEL) & CURPIPE); + ep = r8a66597->pipenum2ep[pipenum]; + sudmac_finish(r8a66597, ep); + } +} + static irqreturn_t r8a66597_irq(int irq, void *_r8a66597) { struct r8a66597 *r8a66597 = _r8a66597; @@ -1173,6 +1475,9 @@ static irqreturn_t r8a66597_irq(int irq, void *_r8a66597) u16 savepipe; u16 mask0; + if (r8a66597_is_sudmac(r8a66597)) + r8a66597_sudmac_irq(r8a66597); + spin_lock(&r8a66597->lock); intsts0 = r8a66597_read(r8a66597, INTSTS0); @@ -1433,23 +1738,18 @@ static struct usb_ep_ops r8a66597_ep_ops = { }; /*-------------------------------------------------------------------------*/ -static struct r8a66597 *the_controller; - -static int r8a66597_start(struct usb_gadget_driver *driver, - int (*bind)(struct usb_gadget *)) +static int r8a66597_start(struct usb_gadget *gadget, + struct usb_gadget_driver *driver) { - struct r8a66597 *r8a66597 = the_controller; + struct r8a66597 *r8a66597 = gadget_to_r8a66597(gadget); int retval; if (!driver || driver->speed != USB_SPEED_HIGH - || !bind || !driver->setup) return -EINVAL; if (!r8a66597) return -ENODEV; - if (r8a66597->driver) - return -EBUSY; /* hook up the driver */ driver->driver.bus = NULL; @@ -1458,14 +1758,8 @@ static int r8a66597_start(struct usb_gadget_driver *driver, retval = device_add(&r8a66597->gadget.dev); if (retval) { - printk(KERN_ERR "device_add error (%d)\n", retval); - goto error; - } - - retval = bind(&r8a66597->gadget); - if (retval) { - printk(KERN_ERR "bind to driver error (%d)\n", retval); - device_del(&r8a66597->gadget.dev); + dev_err(r8a66597_to_dev(r8a66597), "device_add error (%d)\n", + retval); goto error; } @@ -1489,23 +1783,17 @@ error: return retval; } -static int r8a66597_stop(struct usb_gadget_driver *driver) +static int r8a66597_stop(struct usb_gadget *gadget, + struct usb_gadget_driver *driver) { - struct r8a66597 *r8a66597 = the_controller; + struct r8a66597 *r8a66597 = gadget_to_r8a66597(gadget); unsigned long flags; - if (driver != r8a66597->driver || !driver->unbind) - return -EINVAL; - spin_lock_irqsave(&r8a66597->lock, flags); - if (r8a66597->gadget.speed != USB_SPEED_UNKNOWN) - r8a66597_usb_disconnect(r8a66597); r8a66597_bclr(r8a66597, VBSE, INTENB0); disable_controller(r8a66597); spin_unlock_irqrestore(&r8a66597->lock, flags); - driver->unbind(&r8a66597->gadget); - device_del(&r8a66597->gadget.dev); r8a66597->driver = NULL; return 0; @@ -1535,8 +1823,8 @@ static int r8a66597_pullup(struct usb_gadget *gadget, int is_on) static struct usb_gadget_ops r8a66597_gadget_ops = { .get_frame = r8a66597_get_frame, - .start = r8a66597_start, - .stop = r8a66597_stop, + .udc_start = r8a66597_start, + .udc_stop = r8a66597_stop, .pullup = r8a66597_pullup, }; @@ -1547,6 +1835,8 @@ static int __exit r8a66597_remove(struct platform_device *pdev) usb_del_gadget_udc(&r8a66597->gadget); del_timer_sync(&r8a66597->timer); iounmap(r8a66597->reg); + if (r8a66597->pdata->sudmac) + iounmap(r8a66597->sudmac_reg); free_irq(platform_get_irq(pdev, 0), r8a66597); r8a66597_free_request(&r8a66597->ep[0].ep, r8a66597->ep0_req); #ifdef CONFIG_HAVE_CLK @@ -1563,6 +1853,26 @@ static void nop_completion(struct usb_ep *ep, struct usb_request *r) { } +static int __init r8a66597_sudmac_ioremap(struct r8a66597 *r8a66597, + struct platform_device *pdev) +{ + struct resource *res; + + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "sudmac"); + if (!res) { + dev_err(&pdev->dev, "platform_get_resource error(sudmac).\n"); + return -ENODEV; + } + + r8a66597->sudmac_reg = ioremap(res->start, resource_size(res)); + if (r8a66597->sudmac_reg == NULL) { + dev_err(&pdev->dev, "ioremap error(sudmac).\n"); + return -ENOMEM; + } + + return 0; +} + static int __init r8a66597_probe(struct platform_device *pdev) { #ifdef CONFIG_HAVE_CLK @@ -1579,7 +1889,7 @@ static int __init r8a66597_probe(struct platform_device *pdev) res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!res) { ret = -ENODEV; - printk(KERN_ERR "platform_get_resource error.\n"); + dev_err(&pdev->dev, "platform_get_resource error.\n"); goto clean_up; } @@ -1589,14 +1899,14 @@ static int __init r8a66597_probe(struct platform_device *pdev) if (irq < 0) { ret = -ENODEV; - printk(KERN_ERR "platform_get_irq error.\n"); + dev_err(&pdev->dev, "platform_get_irq error.\n"); goto clean_up; } reg = ioremap(res->start, resource_size(res)); if (reg == NULL) { ret = -ENOMEM; - printk(KERN_ERR "ioremap error.\n"); + dev_err(&pdev->dev, "ioremap error.\n"); goto clean_up; } @@ -1604,7 +1914,7 @@ static int __init r8a66597_probe(struct platform_device *pdev) r8a66597 = kzalloc(sizeof(struct r8a66597), GFP_KERNEL); if (r8a66597 == NULL) { ret = -ENOMEM; - printk(KERN_ERR "kzalloc error\n"); + dev_err(&pdev->dev, "kzalloc error\n"); goto clean_up; } @@ -1640,13 +1950,18 @@ static int __init r8a66597_probe(struct platform_device *pdev) clk_enable(r8a66597->clk); } #endif + if (r8a66597->pdata->sudmac) { + ret = r8a66597_sudmac_ioremap(r8a66597, pdev); + if (ret < 0) + goto clean_up2; + } disable_controller(r8a66597); /* make sure controller is disabled */ - ret = request_irq(irq, r8a66597_irq, IRQF_DISABLED | IRQF_SHARED, + ret = request_irq(irq, r8a66597_irq, IRQF_SHARED, udc_name, r8a66597); if (ret < 0) { - printk(KERN_ERR "request_irq error (%d)\n", ret); + dev_err(&pdev->dev, "request_irq error (%d)\n", ret); goto clean_up2; } @@ -1672,13 +1987,10 @@ static int __init r8a66597_probe(struct platform_device *pdev) r8a66597->ep[0].fifoaddr = CFIFO; r8a66597->ep[0].fifosel = CFIFOSEL; r8a66597->ep[0].fifoctr = CFIFOCTR; - r8a66597->ep[0].fifotrn = 0; r8a66597->ep[0].pipectr = get_pipectr_addr(0); r8a66597->pipenum2ep[0] = &r8a66597->ep[0]; r8a66597->epaddr2ep[0] = &r8a66597->ep[0]; - the_controller = r8a66597; - r8a66597->ep0_req = r8a66597_alloc_request(&r8a66597->ep[0].ep, GFP_KERNEL); if (r8a66597->ep0_req == NULL) @@ -1705,6 +2017,8 @@ clean_up2: #endif clean_up: if (r8a66597) { + if (r8a66597->sudmac_reg) + iounmap(r8a66597->sudmac_reg); if (r8a66597->ep0_req) r8a66597_free_request(&r8a66597->ep[0].ep, r8a66597->ep0_req); diff --git a/drivers/usb/gadget/r8a66597-udc.h b/drivers/usb/gadget/r8a66597-udc.h index 503f766c23a7..8e3de61cd4b8 100644 --- a/drivers/usb/gadget/r8a66597-udc.h +++ b/drivers/usb/gadget/r8a66597-udc.h @@ -8,16 +8,6 @@ * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - * */ #ifndef __R8A66597_H__ @@ -53,6 +43,7 @@ ((pipenum >= R8A66597_BASE_PIPENUM_ISOC) && \ (pipenum < (R8A66597_BASE_PIPENUM_ISOC + R8A66597_MAX_NUM_ISOC))) +#define r8a66597_is_sudmac(r8a66597) (r8a66597->pdata->sudmac) struct r8a66597_pipe_info { u16 pipe; u16 epnum; @@ -70,6 +61,7 @@ struct r8a66597_request { struct r8a66597_ep { struct usb_ep ep; struct r8a66597 *r8a66597; + struct r8a66597_dma *dma; struct list_head queue; unsigned busy:1; @@ -85,13 +77,20 @@ struct r8a66597_ep { unsigned char fifoaddr; unsigned char fifosel; unsigned char fifoctr; - unsigned char fifotrn; unsigned char pipectr; + unsigned char pipetre; + unsigned char pipetrn; +}; + +struct r8a66597_dma { + unsigned used:1; + unsigned dir:1; /* 1 = IN(write), 0 = OUT(read) */ }; struct r8a66597 { spinlock_t lock; void __iomem *reg; + void __iomem *sudmac_reg; #ifdef CONFIG_HAVE_CLK struct clk *clk; @@ -104,6 +103,7 @@ struct r8a66597 { struct r8a66597_ep ep[R8A66597_MAX_NUM_PIPE]; struct r8a66597_ep *pipenum2ep[R8A66597_MAX_NUM_PIPE]; struct r8a66597_ep *epaddr2ep[16]; + struct r8a66597_dma dma; struct timer_list timer; struct usb_request *ep0_req; /* for internal request */ @@ -124,6 +124,7 @@ struct r8a66597 { #define gadget_to_r8a66597(_gadget) \ container_of(_gadget, struct r8a66597, gadget) #define r8a66597_to_gadget(r8a66597) (&r8a66597->gadget) +#define r8a66597_to_dev(r8a66597) (r8a66597->gadget.dev.parent) static inline u16 r8a66597_read(struct r8a66597 *r8a66597, unsigned long offset) { @@ -182,12 +183,27 @@ static inline void r8a66597_write(struct r8a66597 *r8a66597, u16 val, iowrite16(val, r8a66597->reg + offset); } +static inline void r8a66597_mdfy(struct r8a66597 *r8a66597, + u16 val, u16 pat, unsigned long offset) +{ + u16 tmp; + tmp = r8a66597_read(r8a66597, offset); + tmp = tmp & (~pat); + tmp = tmp | val; + r8a66597_write(r8a66597, tmp, offset); +} + +#define r8a66597_bclr(r8a66597, val, offset) \ + r8a66597_mdfy(r8a66597, 0, val, offset) +#define r8a66597_bset(r8a66597, val, offset) \ + r8a66597_mdfy(r8a66597, val, 0, offset) + static inline void r8a66597_write_fifo(struct r8a66597 *r8a66597, - unsigned long offset, + struct r8a66597_ep *ep, unsigned char *buf, int len) { - void __iomem *fifoaddr = r8a66597->reg + offset; + void __iomem *fifoaddr = r8a66597->reg + ep->fifoaddr; int adj = 0; int i; @@ -215,18 +231,12 @@ static inline void r8a66597_write_fifo(struct r8a66597 *r8a66597, adj = 0x01; /* 16-bit wide */ } + if (r8a66597->pdata->wr0_shorted_to_wr1) + r8a66597_bclr(r8a66597, MBW_16, ep->fifosel); for (i = 0; i < len; i++) iowrite8(buf[i], fifoaddr + adj - (i & adj)); -} - -static inline void r8a66597_mdfy(struct r8a66597 *r8a66597, - u16 val, u16 pat, unsigned long offset) -{ - u16 tmp; - tmp = r8a66597_read(r8a66597, offset); - tmp = tmp & (~pat); - tmp = tmp | val; - r8a66597_write(r8a66597, tmp, offset); + if (r8a66597->pdata->wr0_shorted_to_wr1) + r8a66597_bclr(r8a66597, MBW_16, ep->fifosel); } static inline u16 get_xtal_from_pdata(struct r8a66597_platdata *pdata) @@ -251,12 +261,21 @@ static inline u16 get_xtal_from_pdata(struct r8a66597_platdata *pdata) return clock; } -#define r8a66597_bclr(r8a66597, val, offset) \ - r8a66597_mdfy(r8a66597, 0, val, offset) -#define r8a66597_bset(r8a66597, val, offset) \ - r8a66597_mdfy(r8a66597, val, 0, offset) +static inline u32 r8a66597_sudmac_read(struct r8a66597 *r8a66597, + unsigned long offset) +{ + return ioread32(r8a66597->sudmac_reg + offset); +} + +static inline void r8a66597_sudmac_write(struct r8a66597 *r8a66597, u32 val, + unsigned long offset) +{ + iowrite32(val, r8a66597->sudmac_reg + offset); +} #define get_pipectr_addr(pipenum) (PIPE1CTR + (pipenum - 1) * 2) +#define get_pipetre_addr(pipenum) (PIPE1TRE + (pipenum - 1) * 4) +#define get_pipetrn_addr(pipenum) (PIPE1TRN + (pipenum - 1) * 4) #define enable_irq_ready(r8a66597, pipenum) \ enable_pipe_irq(r8a66597, pipenum, BRDYENB) diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c index 8bdee67ce09a..a552453dc946 100644 --- a/drivers/usb/gadget/s3c-hsotg.c +++ b/drivers/usb/gadget/s3c-hsotg.c @@ -1951,30 +1951,26 @@ static void s3c_hsotg_irq_enumdone(struct s3c_hsotg *hsotg) case S3C_DSTS_EnumSpd_FS: case S3C_DSTS_EnumSpd_FS48: hsotg->gadget.speed = USB_SPEED_FULL; - dev_info(hsotg->dev, "new device is full-speed\n"); - ep0_mps = EP0_MPS_LIMIT; ep_mps = 64; break; case S3C_DSTS_EnumSpd_HS: - dev_info(hsotg->dev, "new device is high-speed\n"); hsotg->gadget.speed = USB_SPEED_HIGH; - ep0_mps = EP0_MPS_LIMIT; ep_mps = 512; break; case S3C_DSTS_EnumSpd_LS: hsotg->gadget.speed = USB_SPEED_LOW; - dev_info(hsotg->dev, "new device is low-speed\n"); - /* note, we don't actually support LS in this driver at the * moment, and the documentation seems to imply that it isn't * supported by the PHYs on some of the devices. */ break; } + dev_info(hsotg->dev, "new device is %s\n", + usb_speed_string(hsotg->gadget.speed)); /* we should now know the maximum packet size for an * endpoint, so set the endpoints to a default value. */ @@ -2297,7 +2293,7 @@ static int s3c_hsotg_ep_enable(struct usb_ep *ep, return -EINVAL; } - mps = le16_to_cpu(desc->wMaxPacketSize); + mps = usb_endpoint_maxp(desc); /* note, we handle this here instead of s3c_hsotg_set_ep_maxpacket */ diff --git a/drivers/usb/gadget/s3c-hsudc.c b/drivers/usb/gadget/s3c-hsudc.c index 3fa717c5f4bc..8d54f893cefe 100644 --- a/drivers/usb/gadget/s3c-hsudc.c +++ b/drivers/usb/gadget/s3c-hsudc.c @@ -26,6 +26,7 @@ #include <linux/clk.h> #include <linux/usb/ch9.h> #include <linux/usb/gadget.h> +#include <linux/usb/otg.h> #include <linux/prefetch.h> #include <mach/regs-s3c2443-clock.h> @@ -137,6 +138,7 @@ struct s3c_hsudc { struct usb_gadget_driver *driver; struct device *dev; struct s3c24xx_hsudc_platdata *pd; + struct otg_transceiver *transceiver; spinlock_t lock; void __iomem *regs; struct resource *mem_rsrc; @@ -759,11 +761,11 @@ static int s3c_hsudc_ep_enable(struct usb_ep *_ep, if (!_ep || !desc || hsep->desc || _ep->name == ep0name || desc->bDescriptorType != USB_DT_ENDPOINT || hsep->bEndpointAddress != desc->bEndpointAddress - || ep_maxpacket(hsep) < le16_to_cpu(desc->wMaxPacketSize)) + || ep_maxpacket(hsep) < usb_endpoint_maxp(desc)) return -EINVAL; if ((desc->bmAttributes == USB_ENDPOINT_XFER_BULK - && le16_to_cpu(desc->wMaxPacketSize) != ep_maxpacket(hsep)) + && usb_endpoint_maxp(desc) != ep_maxpacket(hsep)) || !desc->wMaxPacketSize) return -ERANGE; @@ -779,7 +781,7 @@ static int s3c_hsudc_ep_enable(struct usb_ep *_ep, hsep->stopped = hsep->wedge = 0; hsep->desc = desc; - hsep->ep.maxpacket = le16_to_cpu(desc->wMaxPacketSize); + hsep->ep.maxpacket = usb_endpoint_maxp(desc); s3c_hsudc_set_halt(_ep, 0); __set_bit(ep_index(hsep), hsudc->regs + S3C_EIER); @@ -1171,6 +1173,22 @@ static int s3c_hsudc_start(struct usb_gadget_driver *driver, return ret; } + /* connect to bus through transceiver */ + if (hsudc->transceiver) { + ret = otg_set_peripheral(hsudc->transceiver, &hsudc->gadget); + if (ret) { + dev_err(hsudc->dev, "%s: can't bind to transceiver\n", + hsudc->gadget.name); + driver->unbind(&hsudc->gadget); + + device_del(&hsudc->gadget.dev); + + hsudc->driver = NULL; + hsudc->gadget.dev.driver = NULL; + return ret; + } + } + enable_irq(hsudc->irq); dev_info(hsudc->dev, "bound driver %s\n", driver->driver.name); @@ -1201,6 +1219,9 @@ static int s3c_hsudc_stop(struct usb_gadget_driver *driver) s3c_hsudc_stop_activity(hsudc, driver); spin_unlock_irqrestore(&hsudc->lock, flags); + if (hsudc->transceiver) + (void) otg_set_peripheral(hsudc->transceiver, NULL); + driver->unbind(&hsudc->gadget); device_del(&hsudc->gadget.dev); disable_irq(hsudc->irq); @@ -1220,10 +1241,24 @@ static int s3c_hsudc_gadget_getframe(struct usb_gadget *gadget) return s3c_hsudc_read_frameno(to_hsudc(gadget)); } +static int s3c_hsudc_vbus_draw(struct usb_gadget *gadget, unsigned mA) +{ + struct s3c_hsudc *hsudc = the_controller; + + if (!hsudc) + return -ENODEV; + + if (hsudc->transceiver) + return otg_set_power(hsudc->transceiver, mA); + + return -EOPNOTSUPP; +} + static struct usb_gadget_ops s3c_hsudc_gadget_ops = { .get_frame = s3c_hsudc_gadget_getframe, .start = s3c_hsudc_start, .stop = s3c_hsudc_stop, + .vbus_draw = s3c_hsudc_vbus_draw, }; static int s3c_hsudc_probe(struct platform_device *pdev) @@ -1247,6 +1282,8 @@ static int s3c_hsudc_probe(struct platform_device *pdev) hsudc->dev = dev; hsudc->pd = pdev->dev.platform_data; + hsudc->transceiver = otg_get_transceiver(); + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!res) { dev_err(dev, "unable to obtain driver resource data\n"); @@ -1269,19 +1306,6 @@ static int s3c_hsudc_probe(struct platform_device *pdev) goto err_remap; } - ret = platform_get_irq(pdev, 0); - if (ret < 0) { - dev_err(dev, "unable to obtain IRQ number\n"); - goto err_irq; - } - hsudc->irq = ret; - - ret = request_irq(hsudc->irq, s3c_hsudc_irq, 0, driver_name, hsudc); - if (ret < 0) { - dev_err(dev, "irq request failed\n"); - goto err_irq; - } - spin_lock_init(&hsudc->lock); device_initialize(&hsudc->gadget.dev); @@ -1299,6 +1323,19 @@ static int s3c_hsudc_probe(struct platform_device *pdev) s3c_hsudc_setup_ep(hsudc); + ret = platform_get_irq(pdev, 0); + if (ret < 0) { + dev_err(dev, "unable to obtain IRQ number\n"); + goto err_irq; + } + hsudc->irq = ret; + + ret = request_irq(hsudc->irq, s3c_hsudc_irq, 0, driver_name, hsudc); + if (ret < 0) { + dev_err(dev, "irq request failed\n"); + goto err_irq; + } + hsudc->uclk = clk_get(&pdev->dev, "usb-device"); if (IS_ERR(hsudc->uclk)) { dev_err(dev, "failed to find usb-device clock source\n"); diff --git a/drivers/usb/gadget/s3c2410_udc.c b/drivers/usb/gadget/s3c2410_udc.c index 8d31848aab09..b8643771fa80 100644 --- a/drivers/usb/gadget/s3c2410_udc.c +++ b/drivers/usb/gadget/s3c2410_udc.c @@ -10,16 +10,6 @@ * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * */ #include <linux/module.h> @@ -1082,7 +1072,7 @@ static int s3c2410_udc_ep_enable(struct usb_ep *_ep, if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN) return -ESHUTDOWN; - max = le16_to_cpu(desc->wMaxPacketSize) & 0x1fff; + max = usb_endpoint_maxp(desc) & 0x1fff; local_irq_save (flags); _ep->maxpacket = max & 0x7ff; @@ -1903,7 +1893,7 @@ static int s3c2410_udc_probe(struct platform_device *pdev) /* irq setup after old hardware state is cleaned up */ retval = request_irq(IRQ_USBD, s3c2410_udc_irq, - IRQF_DISABLED, gadget_name, udc); + 0, gadget_name, udc); if (retval != 0) { dev_err(dev, "cannot get irq %i, err %d\n", IRQ_USBD, retval); @@ -1927,7 +1917,7 @@ static int s3c2410_udc_probe(struct platform_device *pdev) } retval = request_irq(irq, s3c2410_udc_vbus_irq, - IRQF_DISABLED | IRQF_TRIGGER_RISING + IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | IRQF_SHARED, gadget_name, udc); diff --git a/drivers/usb/gadget/s3c2410_udc.h b/drivers/usb/gadget/s3c2410_udc.h index 9e0bece4f241..a48f619cb1cc 100644 --- a/drivers/usb/gadget/s3c2410_udc.h +++ b/drivers/usb/gadget/s3c2410_udc.h @@ -9,16 +9,6 @@ * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * */ #ifndef _S3C2410_UDC_H diff --git a/drivers/usb/gadget/storage_common.c b/drivers/usb/gadget/storage_common.c index d3dd227a2bfc..c7f291a331df 100644 --- a/drivers/usb/gadget/storage_common.c +++ b/drivers/usb/gadget/storage_common.c @@ -9,15 +9,6 @@ * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ @@ -52,6 +43,12 @@ * characters rather then a pointer to void. */ +/* + * When USB_GADGET_DEBUG_FILES is defined the module param num_buffers + * sets the number of pipeline buffers (length of the fsg_buffhd array). + * The valid range of num_buffers is: num >= 2 && num <= 4. + */ + #include <linux/usb/storage.h> #include <scsi/scsi.h> @@ -247,6 +244,8 @@ struct fsg_lun { u32 sense_data_info; u32 unit_attention_data; + unsigned int blkbits; /* Bits of logical block size of bound block device */ + unsigned int blksize; /* logical block size of bound block device */ struct device dev; }; @@ -262,8 +261,31 @@ static struct fsg_lun *fsg_lun_from_dev(struct device *dev) #define EP0_BUFSIZE 256 #define DELAYED_STATUS (EP0_BUFSIZE + 999) /* An impossibly large value */ -/* Number of buffers we will use. 2 is enough for double-buffering */ -#define FSG_NUM_BUFFERS 2 +#ifdef CONFIG_USB_GADGET_DEBUG_FILES + +static unsigned int fsg_num_buffers = CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS; +module_param_named(num_buffers, fsg_num_buffers, uint, S_IRUGO); +MODULE_PARM_DESC(num_buffers, "Number of pipeline buffers"); + +#else + +/* + * Number of buffers we will use. + * 2 is usually enough for good buffering pipeline + */ +#define fsg_num_buffers CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS + +#endif /* CONFIG_USB_DEBUG */ + +/* check if fsg_num_buffers is within a valid range */ +static inline int fsg_num_buffers_validate(void) +{ + if (fsg_num_buffers >= 2 && fsg_num_buffers <= 4) + return 0; + pr_err("fsg_num_buffers %u is out of range (%d to %d)\n", + fsg_num_buffers, 2 ,4); + return -EINVAL; +} /* Default size of buffer length. */ #define FSG_BUFLEN ((u32)16384) @@ -493,12 +515,128 @@ static struct usb_descriptor_header *fsg_hs_function[] = { NULL, }; +static struct usb_endpoint_descriptor +fsg_ss_bulk_in_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + + /* bEndpointAddress copied from fs_bulk_in_desc during fsg_bind() */ + .bmAttributes = USB_ENDPOINT_XFER_BULK, + .wMaxPacketSize = cpu_to_le16(1024), +}; + +static struct usb_ss_ep_comp_descriptor fsg_ss_bulk_in_comp_desc = { + .bLength = sizeof(fsg_ss_bulk_in_comp_desc), + .bDescriptorType = USB_DT_SS_ENDPOINT_COMP, + + /*.bMaxBurst = DYNAMIC, */ +}; + +static struct usb_endpoint_descriptor +fsg_ss_bulk_out_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + + /* bEndpointAddress copied from fs_bulk_out_desc during fsg_bind() */ + .bmAttributes = USB_ENDPOINT_XFER_BULK, + .wMaxPacketSize = cpu_to_le16(1024), +}; + +static struct usb_ss_ep_comp_descriptor fsg_ss_bulk_out_comp_desc = { + .bLength = sizeof(fsg_ss_bulk_in_comp_desc), + .bDescriptorType = USB_DT_SS_ENDPOINT_COMP, + + /*.bMaxBurst = DYNAMIC, */ +}; + +#ifndef FSG_NO_INTR_EP + +static struct usb_endpoint_descriptor +fsg_ss_intr_in_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + + /* bEndpointAddress copied from fs_intr_in_desc during fsg_bind() */ + .bmAttributes = USB_ENDPOINT_XFER_INT, + .wMaxPacketSize = cpu_to_le16(2), + .bInterval = 9, /* 2**(9-1) = 256 uframes -> 32 ms */ +}; + +static struct usb_ss_ep_comp_descriptor fsg_ss_intr_in_comp_desc = { + .bLength = sizeof(fsg_ss_bulk_in_comp_desc), + .bDescriptorType = USB_DT_SS_ENDPOINT_COMP, + + .wBytesPerInterval = cpu_to_le16(2), +}; + +#ifndef FSG_NO_OTG +# define FSG_SS_FUNCTION_PRE_EP_ENTRIES 2 +#else +# define FSG_SS_FUNCTION_PRE_EP_ENTRIES 1 +#endif + +#endif + +static __maybe_unused struct usb_ext_cap_descriptor fsg_ext_cap_desc = { + .bLength = USB_DT_USB_EXT_CAP_SIZE, + .bDescriptorType = USB_DT_DEVICE_CAPABILITY, + .bDevCapabilityType = USB_CAP_TYPE_EXT, + + .bmAttributes = cpu_to_le32(USB_LPM_SUPPORT), +}; + +static __maybe_unused struct usb_ss_cap_descriptor fsg_ss_cap_desc = { + .bLength = USB_DT_USB_SS_CAP_SIZE, + .bDescriptorType = USB_DT_DEVICE_CAPABILITY, + .bDevCapabilityType = USB_SS_CAP_TYPE, + + /* .bmAttributes = LTM is not supported yet */ + + .wSpeedSupported = cpu_to_le16(USB_LOW_SPEED_OPERATION + | USB_FULL_SPEED_OPERATION + | USB_HIGH_SPEED_OPERATION + | USB_5GBPS_OPERATION), + .bFunctionalitySupport = USB_LOW_SPEED_OPERATION, + .bU1devExitLat = USB_DEFAULT_U1_DEV_EXIT_LAT, + .bU2DevExitLat = USB_DEFAULT_U2_DEV_EXIT_LAT, +}; + +static __maybe_unused struct usb_bos_descriptor fsg_bos_desc = { + .bLength = USB_DT_BOS_SIZE, + .bDescriptorType = USB_DT_BOS, + + .wTotalLength = USB_DT_BOS_SIZE + + USB_DT_USB_EXT_CAP_SIZE + + USB_DT_USB_SS_CAP_SIZE, + + .bNumDeviceCaps = 2, +}; + +static struct usb_descriptor_header *fsg_ss_function[] = { +#ifndef FSG_NO_OTG + (struct usb_descriptor_header *) &fsg_otg_desc, +#endif + (struct usb_descriptor_header *) &fsg_intf_desc, + (struct usb_descriptor_header *) &fsg_ss_bulk_in_desc, + (struct usb_descriptor_header *) &fsg_ss_bulk_in_comp_desc, + (struct usb_descriptor_header *) &fsg_ss_bulk_out_desc, + (struct usb_descriptor_header *) &fsg_ss_bulk_out_comp_desc, +#ifndef FSG_NO_INTR_EP + (struct usb_descriptor_header *) &fsg_ss_intr_in_desc, + (struct usb_descriptor_header *) &fsg_ss_intr_in_comp_desc, +#endif + NULL, +}; + /* Maxpacket and other transfer characteristics vary by speed. */ static __maybe_unused struct usb_endpoint_descriptor * fsg_ep_desc(struct usb_gadget *g, struct usb_endpoint_descriptor *fs, - struct usb_endpoint_descriptor *hs) + struct usb_endpoint_descriptor *hs, + struct usb_endpoint_descriptor *ss) { - if (gadget_is_dualspeed(g) && g->speed == USB_SPEED_HIGH) + if (gadget_is_superspeed(g) && g->speed == USB_SPEED_SUPER) + return ss; + else if (gadget_is_dualspeed(g) && g->speed == USB_SPEED_HIGH) return hs; return fs; } @@ -580,13 +718,24 @@ static int fsg_lun_open(struct fsg_lun *curlun, const char *filename) rc = (int) size; goto out; } - num_sectors = size >> 9; /* File size in 512-byte blocks */ + + if (curlun->cdrom) { + curlun->blksize = 2048; + curlun->blkbits = 11; + } else if (inode->i_bdev) { + curlun->blksize = bdev_logical_block_size(inode->i_bdev); + curlun->blkbits = blksize_bits(curlun->blksize); + } else { + curlun->blksize = 512; + curlun->blkbits = 9; + } + + num_sectors = size >> curlun->blkbits; /* File size in logic-block-size blocks */ min_sectors = 1; if (curlun->cdrom) { - num_sectors &= ~3; /* Reduce to a multiple of 2048 */ - min_sectors = 300*4; /* Smallest track is 300 frames */ - if (num_sectors >= 256*60*75*4) { - num_sectors = (256*60*75 - 1) * 4; + min_sectors = 300; /* Smallest track is 300 frames */ + if (num_sectors >= 256*60*75) { + num_sectors = 256*60*75 - 1; LINFO(curlun, "file too big: %s\n", filename); LINFO(curlun, "using only first %d blocks\n", (int) num_sectors); diff --git a/drivers/usb/gadget/u_ether.c b/drivers/usb/gadget/u_ether.c index dfed4c1d96c0..29c854bbca44 100644 --- a/drivers/usb/gadget/u_ether.c +++ b/drivers/usb/gadget/u_ether.c @@ -9,15 +9,6 @@ * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ /* #define VERBOSE_DEBUG */ diff --git a/drivers/usb/gadget/u_ether.h b/drivers/usb/gadget/u_ether.h index c966440ddd70..8012357e98aa 100644 --- a/drivers/usb/gadget/u_ether.h +++ b/drivers/usb/gadget/u_ether.h @@ -9,15 +9,6 @@ * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #ifndef __U_ETHER_H diff --git a/drivers/usb/gadget/u_serial.c b/drivers/usb/gadget/u_serial.c index a8aa46962d81..3a4a664bab44 100644 --- a/drivers/usb/gadget/u_serial.c +++ b/drivers/usb/gadget/u_serial.c @@ -552,9 +552,8 @@ recycle: /* Push from tty to ldisc; without low_latency set this is handled by * a workqueue, so we won't get callbacks and can hold port_lock */ - if (tty && do_push) { + if (tty && do_push) tty_flip_buffer_push(tty); - } /* We want our data queue to become empty ASAP, keeping data diff --git a/drivers/usb/gadget/udc-core.c b/drivers/usb/gadget/udc-core.c index 05ba47214361..022baeca7c94 100644 --- a/drivers/usb/gadget/udc-core.c +++ b/drivers/usb/gadget/udc-core.c @@ -356,7 +356,7 @@ static DEVICE_ATTR(srp, S_IWUSR, NULL, usb_udc_srp_store); static ssize_t usb_udc_softconn_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t n) { - struct usb_udc *udc = dev_get_drvdata(dev); + struct usb_udc *udc = container_of(dev, struct usb_udc, dev); if (sysfs_streq(buf, "connect")) { usb_gadget_connect(udc->gadget); @@ -375,23 +375,8 @@ static ssize_t usb_udc_speed_show(struct device *dev, struct device_attribute *attr, char *buf) { struct usb_udc *udc = container_of(dev, struct usb_udc, dev); - struct usb_gadget *gadget = udc->gadget; - - switch (gadget->speed) { - case USB_SPEED_LOW: - return snprintf(buf, PAGE_SIZE, "low-speed\n"); - case USB_SPEED_FULL: - return snprintf(buf, PAGE_SIZE, "full-speed\n"); - case USB_SPEED_HIGH: - return snprintf(buf, PAGE_SIZE, "high-speed\n"); - case USB_SPEED_WIRELESS: - return snprintf(buf, PAGE_SIZE, "wireless\n"); - case USB_SPEED_SUPER: - return snprintf(buf, PAGE_SIZE, "super-speed\n"); - case USB_SPEED_UNKNOWN: /* FALLTHROUGH */ - default: - return snprintf(buf, PAGE_SIZE, "UNKNOWN\n"); - } + return snprintf(buf, PAGE_SIZE, "%s\n", + usb_speed_string(udc->gadget->speed)); } static DEVICE_ATTR(speed, S_IRUSR, usb_udc_speed_show, NULL); diff --git a/drivers/usb/gadget/uvc.h b/drivers/usb/gadget/uvc.h index 5b7919460fd2..bc78c606c12b 100644 --- a/drivers/usb/gadget/uvc.h +++ b/drivers/usb/gadget/uvc.h @@ -8,7 +8,6 @@ * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. - * */ #ifndef _UVC_GADGET_H_ @@ -56,6 +55,7 @@ struct uvc_event #include <linux/usb.h> /* For usb_endpoint_* */ #include <linux/usb/gadget.h> #include <linux/videodev2.h> +#include <linux/version.h> #include <media/v4l2-fh.h> #include "uvc_queue.h" diff --git a/drivers/usb/gadget/uvc_queue.c b/drivers/usb/gadget/uvc_queue.c index aa0ad34e0f1f..d776adb2da67 100644 --- a/drivers/usb/gadget/uvc_queue.c +++ b/drivers/usb/gadget/uvc_queue.c @@ -8,7 +8,6 @@ * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. - * */ #include <linux/kernel.h> diff --git a/drivers/usb/gadget/uvc_v4l2.c b/drivers/usb/gadget/uvc_v4l2.c index 52f8f9e513af..f6e083b50191 100644 --- a/drivers/usb/gadget/uvc_v4l2.c +++ b/drivers/usb/gadget/uvc_v4l2.c @@ -8,7 +8,6 @@ * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. - * */ #include <linux/kernel.h> @@ -16,7 +15,6 @@ #include <linux/errno.h> #include <linux/list.h> #include <linux/mutex.h> -#include <linux/version.h> #include <linux/videodev2.h> #include <linux/vmalloc.h> #include <linux/wait.h> diff --git a/drivers/usb/gadget/uvc_video.c b/drivers/usb/gadget/uvc_video.c index b08f35438d70..b0e53a8ea4f7 100644 --- a/drivers/usb/gadget/uvc_video.c +++ b/drivers/usb/gadget/uvc_video.c @@ -8,7 +8,6 @@ * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. - * */ #include <linux/kernel.h> diff --git a/drivers/usb/gadget/webcam.c b/drivers/usb/gadget/webcam.c index df6882de50bf..668fe128f2ef 100644 --- a/drivers/usb/gadget/webcam.c +++ b/drivers/usb/gadget/webcam.c @@ -8,8 +8,8 @@ * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. - * */ + #include <linux/kernel.h> #include <linux/device.h> #include <linux/usb/video.h> diff --git a/drivers/usb/gadget/zero.c b/drivers/usb/gadget/zero.c index 00e2fd2d4791..20697cc132d1 100644 --- a/drivers/usb/gadget/zero.c +++ b/drivers/usb/gadget/zero.c @@ -8,15 +8,6 @@ * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index ab085f12d570..060e0e2b1ae6 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -19,7 +19,7 @@ config USB_C67X00_HCD config USB_XHCI_HCD tristate "xHCI HCD (USB 3.0) support (EXPERIMENTAL)" - depends on USB && PCI && EXPERIMENTAL + depends on USB && USB_ARCH_HAS_XHCI && EXPERIMENTAL ---help--- The eXtensible Host Controller Interface (xHCI) is standard for USB 3.0 "SuperSpeed" host controller hardware. @@ -515,6 +515,19 @@ config USB_R8A66597_HCD To compile this driver as a module, choose M here: the module will be called r8a66597-hcd. +config USB_RENESAS_USBHS_HCD + tristate "Renesas USBHS HCD support" + depends on USB + depends on USB_RENESAS_USBHS + help + The Renesas USBHS is a USB 2.0 host and peripheral controller. + + Enable this option if your board has this chip, and you want + to use it as a host controller. If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called renesas-usbhs. + config USB_WHCI_HCD tristate "Wireless USB Host Controller Interface (WHCI) driver (EXPERIMENTAL)" depends on EXPERIMENTAL @@ -544,11 +557,11 @@ config USB_HWA_HCD will be called "hwa-hc". config USB_IMX21_HCD - tristate "iMX21 HCD support" - depends on USB && ARM && MACH_MX21 + tristate "i.MX21 HCD support" + depends on USB && ARM && ARCH_MXC help This driver enables support for the on-chip USB host in the - iMX21 processor. + i.MX21 processor. To compile this driver as a module, choose M here: the module will be called "imx21-hcd". @@ -578,3 +591,10 @@ config USB_OCTEON_OHCI config USB_OCTEON2_COMMON bool default y if USB_OCTEON_EHCI || USB_OCTEON_OHCI + +config USB_PXA168_EHCI + bool "Marvell PXA168 on-chip EHCI HCD support" + depends on USB_EHCI_HCD && ARCH_MMP + help + Enable support for Marvell PXA168 SoC's on-chip EHCI + host controller diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile index 624a362f2fee..ed48a5d79e16 100644 --- a/drivers/usb/host/Makefile +++ b/drivers/usb/host/Makefile @@ -11,8 +11,9 @@ fhci-y += fhci-mem.o fhci-tds.o fhci-sched.o fhci-$(CONFIG_FHCI_DEBUG) += fhci-dbg.o -xhci-hcd-y := xhci.o xhci-mem.o xhci-pci.o +xhci-hcd-y := xhci.o xhci-mem.o xhci-hcd-y += xhci-ring.o xhci-hub.o xhci-dbg.o +xhci-hcd-$(CONFIG_PCI) += xhci-pci.o obj-$(CONFIG_USB_WHCI_HCD) += whci/ diff --git a/drivers/usb/host/ehci-ath79.c b/drivers/usb/host/ehci-ath79.c index 4d2e88d04dab..afb6743cf094 100644 --- a/drivers/usb/host/ehci-ath79.c +++ b/drivers/usb/host/ehci-ath79.c @@ -163,7 +163,7 @@ static int ehci_ath79_probe(struct platform_device *pdev) goto err_release_region; } - ret = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED); + ret = usb_add_hcd(hcd, irq, IRQF_SHARED); if (ret) goto err_iounmap; diff --git a/drivers/usb/host/ehci-au1xxx.c b/drivers/usb/host/ehci-au1xxx.c index 42ae57409908..65719e8d24e4 100644 --- a/drivers/usb/host/ehci-au1xxx.c +++ b/drivers/usb/host/ehci-au1xxx.c @@ -181,7 +181,7 @@ static int ehci_hcd_au1xxx_drv_probe(struct platform_device *pdev) ehci->hcs_params = readl(&ehci->caps->hcs_params); ret = usb_add_hcd(hcd, pdev->resource[1].start, - IRQF_DISABLED | IRQF_SHARED); + IRQF_SHARED); if (ret == 0) { platform_set_drvdata(pdev, hcd); return ret; @@ -293,7 +293,7 @@ static int ehci_hcd_au1xxx_drv_resume(struct device *dev) /* here we "know" root ports should always stay powered */ ehci_port_power(ehci, 1); - hcd->state = HC_STATE_SUSPENDED; + ehci->rh_state = EHCI_RH_SUSPENDED; return 0; } diff --git a/drivers/usb/host/ehci-dbg.c b/drivers/usb/host/ehci-dbg.c index 40a844c1dbb4..d6d74d2e09f4 100644 --- a/drivers/usb/host/ehci-dbg.c +++ b/drivers/usb/host/ehci-dbg.c @@ -697,6 +697,19 @@ static ssize_t fill_periodic_buffer(struct debug_buffer *buf) } #undef DBG_SCHED_LIMIT +static const char *rh_state_string(struct ehci_hcd *ehci) +{ + switch (ehci->rh_state) { + case EHCI_RH_HALTED: + return "halted"; + case EHCI_RH_SUSPENDED: + return "suspended"; + case EHCI_RH_RUNNING: + return "running"; + } + return "?"; +} + static ssize_t fill_registers_buffer(struct debug_buffer *buf) { struct usb_hcd *hcd; @@ -730,11 +743,11 @@ static ssize_t fill_registers_buffer(struct debug_buffer *buf) temp = scnprintf (next, size, "bus %s, device %s\n" "%s\n" - "EHCI %x.%02x, hcd state %d\n", + "EHCI %x.%02x, rh state %s\n", hcd->self.controller->bus->name, dev_name(hcd->self.controller), hcd->product_desc, - i >> 8, i & 0x0ff, hcd->state); + i >> 8, i & 0x0ff, rh_state_string(ehci)); size -= temp; next += temp; @@ -808,7 +821,7 @@ static ssize_t fill_registers_buffer(struct debug_buffer *buf) next += temp; temp = scnprintf (next, size, "uframe %04x\n", - ehci_readl(ehci, &ehci->regs->frame_index)); + ehci_read_frame_index(ehci)); size -= temp; next += temp; diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c index 34a3140d1e5f..e90344a17631 100644 --- a/drivers/usb/host/ehci-fsl.c +++ b/drivers/usb/host/ehci-fsl.c @@ -134,7 +134,7 @@ static int usb_hcd_fsl_probe(const struct hc_driver *driver, /* Don't need to set host mode here. It will be done by tdi_reset() */ - retval = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED); + retval = usb_add_hcd(hcd, irq, IRQF_SHARED); if (retval != 0) goto err4; @@ -392,7 +392,7 @@ static int ehci_fsl_mpc512x_drv_suspend(struct device *dev) dev_dbg(dev, "suspending...\n"); - hcd->state = HC_STATE_SUSPENDED; + ehci->rh_state = EHCI_RH_SUSPENDED; dev->power.power_state = PMSG_SUSPEND; /* ignore non-host interrupts */ @@ -481,7 +481,7 @@ static int ehci_fsl_mpc512x_drv_resume(struct device *dev) ehci_writel(ehci, pdata->pm_portsc, &ehci->regs->port_status[0]); set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); - hcd->state = HC_STATE_RUNNING; + ehci->rh_state = EHCI_RH_RUNNING; dev->power.power_state = PMSG_ON; tmp = ehci_readl(ehci, &ehci->regs->command); diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index f72ae0b6ee7f..59e81615e09c 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -95,7 +95,7 @@ static const char hcd_name [] = "ehci_hcd"; #define EHCI_IO_JIFFIES (HZ/10) /* io watchdog > irq_thresh */ #define EHCI_ASYNC_JIFFIES (HZ/20) /* async idle timeout */ #define EHCI_SHRINK_JIFFIES (DIV_ROUND_UP(HZ, 200) + 1) - /* 200-ms async qh unlink delay */ + /* 5-ms async qh unlink delay */ /* Initial IRQ latency: faster than hw default */ static int log2_irq_thresh = 0; // 0 to 6 @@ -238,7 +238,7 @@ static int handshake_on_error_set_halt(struct ehci_hcd *ehci, void __iomem *ptr, error = handshake(ehci, ptr, mask, done, usec); if (error) { ehci_halt(ehci); - ehci_to_hcd(ehci)->state = HC_STATE_HALT; + ehci->rh_state = EHCI_RH_HALTED; ehci_err(ehci, "force halt; handshake %p %08x %08x -> %d\n", ptr, mask, done, error); } @@ -278,7 +278,7 @@ static int ehci_reset (struct ehci_hcd *ehci) command |= CMD_RESET; dbg_cmd (ehci, "reset", command); ehci_writel(ehci, command, &ehci->regs->command); - ehci_to_hcd(ehci)->state = HC_STATE_HALT; + ehci->rh_state = EHCI_RH_HALTED; ehci->next_statechange = jiffies; retval = handshake (ehci, &ehci->regs->command, CMD_RESET, 0, 250 * 1000); @@ -307,7 +307,7 @@ static void ehci_quiesce (struct ehci_hcd *ehci) u32 temp; #ifdef DEBUG - if (!HC_IS_RUNNING (ehci_to_hcd(ehci)->state)) + if (ehci->rh_state != EHCI_RH_RUNNING) BUG (); #endif @@ -356,7 +356,7 @@ static void ehci_iaa_watchdog(unsigned long param) */ if (ehci->reclaim && !timer_pending(&ehci->iaa_watchdog) - && HC_IS_RUNNING(ehci_to_hcd(ehci)->state)) { + && ehci->rh_state == EHCI_RH_RUNNING) { u32 cmd, status; /* If we get here, IAA is *REALLY* late. It's barely @@ -496,7 +496,7 @@ static void ehci_work (struct ehci_hcd *ehci) * misplace IRQs, and should let us run completely without IRQs. * such lossage has been observed on both VT6202 and VT8235. */ - if (HC_IS_RUNNING (ehci_to_hcd(ehci)->state) && + if (ehci->rh_state == EHCI_RH_RUNNING && (ehci->async->qh_next.ptr != NULL || ehci->periodic_sched != 0)) timer_action (ehci, TIMER_IO_WATCHDOG); @@ -516,7 +516,7 @@ static void ehci_stop (struct usb_hcd *hcd) del_timer_sync(&ehci->iaa_watchdog); spin_lock_irq(&ehci->lock); - if (HC_IS_RUNNING (hcd->state)) + if (ehci->rh_state == EHCI_RH_RUNNING) ehci_quiesce (ehci); ehci_silence_controller(ehci); @@ -741,7 +741,7 @@ static int ehci_run (struct usb_hcd *hcd) * be started before the port switching actions could complete. */ down_write(&ehci_cf_port_reset_rwsem); - hcd->state = HC_STATE_RUNNING; + ehci->rh_state = EHCI_RH_RUNNING; ehci_writel(ehci, FLAG_CF, &ehci->regs->configured_flag); ehci_readl(ehci, &ehci->regs->command); /* unblock posted writes */ msleep(5); @@ -768,6 +768,35 @@ static int ehci_run (struct usb_hcd *hcd) return 0; } +static int __maybe_unused ehci_setup (struct usb_hcd *hcd) +{ + struct ehci_hcd *ehci = hcd_to_ehci(hcd); + int retval; + + ehci->regs = (void __iomem *)ehci->caps + + HC_LENGTH(ehci, ehci_readl(ehci, &ehci->caps->hc_capbase)); + dbg_hcs_params(ehci, "reset"); + dbg_hcc_params(ehci, "reset"); + + /* cache this readonly data; minimize chip reads */ + ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params); + + ehci->sbrn = HCD_USB2; + + retval = ehci_halt(ehci); + if (retval) + return retval; + + /* data structure init */ + retval = ehci_init(hcd); + if (retval) + return retval; + + ehci_reset(ehci); + + return 0; +} + /*-------------------------------------------------------------------------*/ static irqreturn_t ehci_irq (struct usb_hcd *hcd) @@ -788,7 +817,7 @@ static irqreturn_t ehci_irq (struct usb_hcd *hcd) /* Shared IRQ? */ masked_status = status & INTR_MASK; - if (!masked_status || unlikely(hcd->state == HC_STATE_HALT)) { + if (!masked_status || unlikely(ehci->rh_state == EHCI_RH_HALTED)) { spin_unlock(&ehci->lock); return IRQ_NONE; } @@ -952,7 +981,7 @@ static int ehci_urb_enqueue ( static void unlink_async (struct ehci_hcd *ehci, struct ehci_qh *qh) { /* failfast */ - if (!HC_IS_RUNNING(ehci_to_hcd(ehci)->state) && ehci->reclaim) + if (ehci->rh_state != EHCI_RH_RUNNING && ehci->reclaim) end_unlink_async(ehci); /* If the QH isn't linked then there's nothing we can do @@ -1079,7 +1108,7 @@ rescan: goto idle_timeout; } - if (!HC_IS_RUNNING (hcd->state)) + if (ehci->rh_state != EHCI_RH_RUNNING) qh->qh_state = QH_STATE_IDLE; switch (qh->qh_state) { case QH_STATE_LINKED: @@ -1166,8 +1195,7 @@ ehci_endpoint_reset(struct usb_hcd *hcd, struct usb_host_endpoint *ep) static int ehci_get_frame (struct usb_hcd *hcd) { struct ehci_hcd *ehci = hcd_to_ehci (hcd); - return (ehci_readl(ehci, &ehci->regs->frame_index) >> 3) % - ehci->periodic_size; + return (ehci_read_frame_index(ehci) >> 3) % ehci->periodic_size; } /*-------------------------------------------------------------------------*/ @@ -1291,6 +1319,16 @@ MODULE_LICENSE ("GPL"); #define PLATFORM_DRIVER ehci_grlib_driver #endif +#ifdef CONFIG_USB_PXA168_EHCI +#include "ehci-pxa168.c" +#define PLATFORM_DRIVER ehci_pxa168_driver +#endif + +#ifdef CONFIG_NLM_XLR +#include "ehci-xls.c" +#define PLATFORM_DRIVER ehci_xls_driver +#endif + #if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \ !defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER) && \ !defined(XILINX_OF_PLATFORM_DRIVER) diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c index e051b30c1847..77bbb2357e47 100644 --- a/drivers/usb/host/ehci-hub.c +++ b/drivers/usb/host/ehci-hub.c @@ -236,10 +236,8 @@ static int ehci_bus_suspend (struct usb_hcd *hcd) } /* stop schedules, clean any completed work */ - if (HC_IS_RUNNING(hcd->state)) { + if (ehci->rh_state == EHCI_RH_RUNNING) ehci_quiesce (ehci); - hcd->state = HC_STATE_QUIESCING; - } ehci->command = ehci_readl(ehci, &ehci->regs->command); ehci_work(ehci); @@ -313,7 +311,7 @@ static int ehci_bus_suspend (struct usb_hcd *hcd) /* turn off now-idle HC */ ehci_halt (ehci); - hcd->state = HC_STATE_SUSPENDED; + ehci->rh_state = EHCI_RH_SUSPENDED; if (ehci->reclaim) end_unlink_async(ehci); @@ -343,7 +341,7 @@ static int ehci_bus_resume (struct usb_hcd *hcd) u32 temp; u32 power_okay; int i; - u8 resume_needed = 0; + unsigned long resume_needed = 0; if (time_before (jiffies, ehci->next_statechange)) msleep(5); @@ -382,6 +380,7 @@ static int ehci_bus_resume (struct usb_hcd *hcd) /* restore CMD_RUN, framelist size, and irq threshold */ ehci_writel(ehci, ehci->command, &ehci->regs->command); + ehci->rh_state = EHCI_RH_RUNNING; /* Some controller/firmware combinations need a delay during which * they set up the port statuses. See Bugzilla #8190. */ @@ -416,7 +415,7 @@ static int ehci_bus_resume (struct usb_hcd *hcd) if (test_bit(i, &ehci->bus_suspended) && (temp & PORT_SUSPEND)) { temp |= PORT_RESUME; - resume_needed = 1; + set_bit(i, &resume_needed); } ehci_writel(ehci, temp, &ehci->regs->port_status [i]); } @@ -431,8 +430,7 @@ static int ehci_bus_resume (struct usb_hcd *hcd) i = HCS_N_PORTS (ehci->hcs_params); while (i--) { temp = ehci_readl(ehci, &ehci->regs->port_status [i]); - if (test_bit(i, &ehci->bus_suspended) && - (temp & PORT_SUSPEND)) { + if (test_bit(i, &resume_needed)) { temp &= ~(PORT_RWC_BITS | PORT_RESUME); ehci_writel(ehci, temp, &ehci->regs->port_status [i]); ehci_vdbg (ehci, "resumed port %d\n", i + 1); @@ -452,7 +450,6 @@ static int ehci_bus_resume (struct usb_hcd *hcd) } ehci->next_statechange = jiffies + msecs_to_jiffies(5); - hcd->state = HC_STATE_RUNNING; /* Now we can safely re-enable irqs */ ehci_writel(ehci, INTR_MASK, &ehci->regs->intr_enable); @@ -564,7 +561,7 @@ ehci_hub_status_data (struct usb_hcd *hcd, char *buf) u32 ppcd = 0; /* if !USB_SUSPEND, root hub timers won't get shut down ... */ - if (!HC_IS_RUNNING(hcd->state)) + if (ehci->rh_state != EHCI_RH_RUNNING) return 0; /* init status to no-changes */ diff --git a/drivers/usb/host/ehci-mxc.c b/drivers/usb/host/ehci-mxc.c index 555a73c864b5..55978fcfa4b2 100644 --- a/drivers/usb/host/ehci-mxc.c +++ b/drivers/usb/host/ehci-mxc.c @@ -236,7 +236,7 @@ static int ehci_mxc_drv_probe(struct platform_device *pdev) priv->hcd = hcd; platform_set_drvdata(pdev, priv); - ret = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED); + ret = usb_add_hcd(hcd, irq, IRQF_SHARED); if (ret) goto err_add; diff --git a/drivers/usb/host/ehci-octeon.c b/drivers/usb/host/ehci-octeon.c index c3ba3ed5f3a6..ba1f51361134 100644 --- a/drivers/usb/host/ehci-octeon.c +++ b/drivers/usb/host/ehci-octeon.c @@ -155,7 +155,7 @@ static int ehci_octeon_drv_probe(struct platform_device *pdev) /* cache this readonly data; minimize chip reads */ ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params); - ret = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED); + ret = usb_add_hcd(hcd, irq, IRQF_SHARED); if (ret) { dev_dbg(&pdev->dev, "failed to add hcd with err %d\n", ret); goto err3; diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c index 45240321ca09..e39b0297bad1 100644 --- a/drivers/usb/host/ehci-omap.c +++ b/drivers/usb/host/ehci-omap.c @@ -228,7 +228,7 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev) /* cache this readonly data; minimize chip reads */ omap_ehci->hcs_params = readl(&omap_ehci->caps->hcs_params); - ret = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED); + ret = usb_add_hcd(hcd, irq, IRQF_SHARED); if (ret) { dev_err(dev, "failed to add hcd with err %d\n", ret); goto err_add_hcd; diff --git a/drivers/usb/host/ehci-orion.c b/drivers/usb/host/ehci-orion.c index 395bdb0248d5..a68a2a5c4b83 100644 --- a/drivers/usb/host/ehci-orion.c +++ b/drivers/usb/host/ehci-orion.c @@ -277,7 +277,7 @@ static int __devinit ehci_orion_drv_probe(struct platform_device *pdev) printk(KERN_WARNING "Orion ehci -USB phy version isn't supported.\n"); } - err = usb_add_hcd(hcd, irq, IRQF_SHARED | IRQF_DISABLED); + err = usb_add_hcd(hcd, irq, IRQF_SHARED); if (err) goto err4; diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c index 1102ce65a3a9..f4b627d343ac 100644 --- a/drivers/usb/host/ehci-pci.c +++ b/drivers/usb/host/ehci-pci.c @@ -224,6 +224,11 @@ static int ehci_pci_setup(struct usb_hcd *hcd) pci_dev_put(p_smbus); } break; + case PCI_VENDOR_ID_NETMOS: + /* MosChip frame-index-register bug */ + ehci_info(ehci, "applying MosChip frame-index workaround\n"); + ehci->frame_index_bug = 1; + break; } /* optional debug port, normally in the first BAR */ @@ -439,7 +444,7 @@ static int ehci_pci_resume(struct usb_hcd *hcd, bool hibernated) /* here we "know" root ports should always stay powered */ ehci_port_power(ehci, 1); - hcd->state = HC_STATE_SUSPENDED; + ehci->rh_state = EHCI_RH_SUSPENDED; return 0; } #endif diff --git a/drivers/usb/host/ehci-ps3.c b/drivers/usb/host/ehci-ps3.c index 64626a777d61..2dc32da75cfc 100644 --- a/drivers/usb/host/ehci-ps3.c +++ b/drivers/usb/host/ehci-ps3.c @@ -167,7 +167,7 @@ static int __devinit ps3_ehci_probe(struct ps3_system_bus_device *dev) ps3_system_bus_set_drvdata(dev, hcd); - result = usb_add_hcd(hcd, virq, IRQF_DISABLED); + result = usb_add_hcd(hcd, virq, 0); if (result) { dev_dbg(&dev->core, "%s:%d: usb_add_hcd failed (%d)\n", diff --git a/drivers/usb/host/ehci-pxa168.c b/drivers/usb/host/ehci-pxa168.c new file mode 100644 index 000000000000..ac0c16e8f539 --- /dev/null +++ b/drivers/usb/host/ehci-pxa168.c @@ -0,0 +1,363 @@ +/* + * drivers/usb/host/ehci-pxa168.c + * + * Tanmay Upadhyay <tanmay.upadhyay@einfochips.com> + * + * Based on drivers/usb/host/ehci-orion.c + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/clk.h> +#include <mach/pxa168.h> + +#define USB_PHY_CTRL_REG 0x4 +#define USB_PHY_PLL_REG 0x8 +#define USB_PHY_TX_REG 0xc + +#define FBDIV_SHIFT 4 + +#define ICP_SHIFT 12 +#define ICP_15 2 +#define ICP_20 3 +#define ICP_25 4 + +#define KVCO_SHIFT 15 + +#define PLLCALI12_SHIFT 25 +#define CALI12_VDD 0 +#define CALI12_09 1 +#define CALI12_10 2 +#define CALI12_11 3 + +#define PLLVDD12_SHIFT 27 +#define VDD12_VDD 0 +#define VDD12_10 1 +#define VDD12_11 2 +#define VDD12_12 3 + +#define PLLVDD18_SHIFT 29 +#define VDD18_19 0 +#define VDD18_20 1 +#define VDD18_21 2 +#define VDD18_22 3 + + +#define PLL_READY (1 << 23) +#define VCOCAL_START (1 << 21) +#define REG_RCAL_START (1 << 12) + +struct pxa168_usb_drv_data { + struct ehci_hcd ehci; + struct clk *pxa168_usb_clk; + struct resource *usb_phy_res; + void __iomem *usb_phy_reg_base; +}; + +static int ehci_pxa168_setup(struct usb_hcd *hcd) +{ + struct ehci_hcd *ehci = hcd_to_ehci(hcd); + int retval; + + ehci_reset(ehci); + retval = ehci_halt(ehci); + if (retval) + return retval; + + /* + * data structure init + */ + retval = ehci_init(hcd); + if (retval) + return retval; + + hcd->has_tt = 1; + + ehci_port_power(ehci, 0); + + return retval; +} + +static const struct hc_driver ehci_pxa168_hc_driver = { + .description = hcd_name, + .product_desc = "Marvell PXA168 EHCI", + .hcd_priv_size = sizeof(struct pxa168_usb_drv_data), + + /* + * generic hardware linkage + */ + .irq = ehci_irq, + .flags = HCD_MEMORY | HCD_USB2, + + /* + * basic lifecycle operations + */ + .reset = ehci_pxa168_setup, + .start = ehci_run, + .stop = ehci_stop, + .shutdown = ehci_shutdown, + + /* + * managing i/o requests and associated device resources + */ + .urb_enqueue = ehci_urb_enqueue, + .urb_dequeue = ehci_urb_dequeue, + .endpoint_disable = ehci_endpoint_disable, + .endpoint_reset = ehci_endpoint_reset, + + /* + * scheduling support + */ + .get_frame_number = ehci_get_frame, + + /* + * root hub support + */ + .hub_status_data = ehci_hub_status_data, + .hub_control = ehci_hub_control, + .bus_suspend = ehci_bus_suspend, + .bus_resume = ehci_bus_resume, + .relinquish_port = ehci_relinquish_port, + .port_handed_over = ehci_port_handed_over, + + .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete, +}; + +static int pxa168_usb_phy_init(struct platform_device *pdev) +{ + struct resource *res; + void __iomem *usb_phy_reg_base; + struct pxa168_usb_pdata *pdata; + struct pxa168_usb_drv_data *drv_data; + struct usb_hcd *hcd = platform_get_drvdata(pdev); + unsigned long reg_val; + int pll_retry_cont = 10000, err = 0; + + drv_data = (struct pxa168_usb_drv_data *)hcd->hcd_priv; + pdata = (struct pxa168_usb_pdata *)pdev->dev.platform_data; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 1); + if (!res) { + dev_err(&pdev->dev, + "Found HC with no PHY register addr. Check %s setup!\n", + dev_name(&pdev->dev)); + return -ENODEV; + } + + if (!request_mem_region(res->start, resource_size(res), + ehci_pxa168_hc_driver.description)) { + dev_dbg(&pdev->dev, "controller already in use\n"); + return -EBUSY; + } + + usb_phy_reg_base = ioremap(res->start, resource_size(res)); + if (usb_phy_reg_base == NULL) { + dev_dbg(&pdev->dev, "error mapping memory\n"); + err = -EFAULT; + goto err1; + } + drv_data->usb_phy_reg_base = usb_phy_reg_base; + drv_data->usb_phy_res = res; + + /* If someone wants to init USB phy in board specific way */ + if (pdata && pdata->phy_init) + return pdata->phy_init(usb_phy_reg_base); + + /* Power up the PHY and PLL */ + writel(readl(usb_phy_reg_base + USB_PHY_CTRL_REG) | 0x3, + usb_phy_reg_base + USB_PHY_CTRL_REG); + + /* Configure PHY PLL */ + reg_val = readl(usb_phy_reg_base + USB_PHY_PLL_REG) & ~(0x7e03ffff); + reg_val |= (VDD18_22 << PLLVDD18_SHIFT | VDD12_12 << PLLVDD12_SHIFT | + CALI12_11 << PLLCALI12_SHIFT | 3 << KVCO_SHIFT | + ICP_15 << ICP_SHIFT | 0xee << FBDIV_SHIFT | 0xb); + writel(reg_val, usb_phy_reg_base + USB_PHY_PLL_REG); + + /* Make sure PHY PLL is ready */ + while (!(readl(usb_phy_reg_base + USB_PHY_PLL_REG) & PLL_READY)) { + if (!(pll_retry_cont--)) { + dev_dbg(&pdev->dev, "USB PHY PLL not ready\n"); + err = -EIO; + goto err2; + } + } + + /* Toggle VCOCAL_START bit of U2PLL for PLL calibration */ + udelay(200); + writel(readl(usb_phy_reg_base + USB_PHY_PLL_REG) | VCOCAL_START, + usb_phy_reg_base + USB_PHY_PLL_REG); + udelay(40); + writel(readl(usb_phy_reg_base + USB_PHY_PLL_REG) & ~VCOCAL_START, + usb_phy_reg_base + USB_PHY_PLL_REG); + + /* Toggle REG_RCAL_START bit of U2PTX for impedance calibration */ + udelay(400); + writel(readl(usb_phy_reg_base + USB_PHY_TX_REG) | REG_RCAL_START, + usb_phy_reg_base + USB_PHY_TX_REG); + udelay(40); + writel(readl(usb_phy_reg_base + USB_PHY_TX_REG) & ~REG_RCAL_START, + usb_phy_reg_base + USB_PHY_TX_REG); + + /* Make sure PHY PLL is ready again */ + pll_retry_cont = 0; + while (!(readl(usb_phy_reg_base + USB_PHY_PLL_REG) & PLL_READY)) { + if (!(pll_retry_cont--)) { + dev_dbg(&pdev->dev, "USB PHY PLL not ready\n"); + err = -EIO; + goto err2; + } + } + + return 0; +err2: + iounmap(usb_phy_reg_base); +err1: + release_mem_region(res->start, resource_size(res)); + return err; +} + +static int __devinit ehci_pxa168_drv_probe(struct platform_device *pdev) +{ + struct resource *res; + struct usb_hcd *hcd; + struct ehci_hcd *ehci; + struct pxa168_usb_drv_data *drv_data; + void __iomem *regs; + int irq, err = 0; + + if (usb_disabled()) + return -ENODEV; + + pr_debug("Initializing pxa168-SoC USB Host Controller\n"); + + irq = platform_get_irq(pdev, 0); + if (irq <= 0) { + dev_err(&pdev->dev, + "Found HC with no IRQ. Check %s setup!\n", + dev_name(&pdev->dev)); + err = -ENODEV; + goto err1; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(&pdev->dev, + "Found HC with no register addr. Check %s setup!\n", + dev_name(&pdev->dev)); + err = -ENODEV; + goto err1; + } + + if (!request_mem_region(res->start, resource_size(res), + ehci_pxa168_hc_driver.description)) { + dev_dbg(&pdev->dev, "controller already in use\n"); + err = -EBUSY; + goto err1; + } + + regs = ioremap(res->start, resource_size(res)); + if (regs == NULL) { + dev_dbg(&pdev->dev, "error mapping memory\n"); + err = -EFAULT; + goto err2; + } + + hcd = usb_create_hcd(&ehci_pxa168_hc_driver, + &pdev->dev, dev_name(&pdev->dev)); + if (!hcd) { + err = -ENOMEM; + goto err3; + } + + drv_data = (struct pxa168_usb_drv_data *)hcd->hcd_priv; + + /* Enable USB clock */ + drv_data->pxa168_usb_clk = clk_get(&pdev->dev, "PXA168-USBCLK"); + if (IS_ERR(drv_data->pxa168_usb_clk)) { + dev_err(&pdev->dev, "Couldn't get USB clock\n"); + err = PTR_ERR(drv_data->pxa168_usb_clk); + goto err4; + } + clk_enable(drv_data->pxa168_usb_clk); + + err = pxa168_usb_phy_init(pdev); + if (err) { + dev_err(&pdev->dev, "USB PHY initialization failed\n"); + goto err5; + } + + hcd->rsrc_start = res->start; + hcd->rsrc_len = resource_size(res); + hcd->regs = regs; + + ehci = hcd_to_ehci(hcd); + ehci->caps = hcd->regs + 0x100; + ehci->regs = hcd->regs + 0x100 + + HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase)); + ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params); + hcd->has_tt = 1; + ehci->sbrn = 0x20; + + err = usb_add_hcd(hcd, irq, IRQF_SHARED | IRQF_DISABLED); + if (err) + goto err5; + + return 0; + +err5: + clk_disable(drv_data->pxa168_usb_clk); + clk_put(drv_data->pxa168_usb_clk); +err4: + usb_put_hcd(hcd); +err3: + iounmap(regs); +err2: + release_mem_region(res->start, resource_size(res)); +err1: + dev_err(&pdev->dev, "init %s fail, %d\n", + dev_name(&pdev->dev), err); + + return err; +} + +static int __exit ehci_pxa168_drv_remove(struct platform_device *pdev) +{ + struct usb_hcd *hcd = platform_get_drvdata(pdev); + struct pxa168_usb_drv_data *drv_data = + (struct pxa168_usb_drv_data *)hcd->hcd_priv; + + usb_remove_hcd(hcd); + + /* Power down PHY & PLL */ + writel(readl(drv_data->usb_phy_reg_base + USB_PHY_CTRL_REG) & (~0x3), + drv_data->usb_phy_reg_base + USB_PHY_CTRL_REG); + + clk_disable(drv_data->pxa168_usb_clk); + clk_put(drv_data->pxa168_usb_clk); + + iounmap(hcd->regs); + release_mem_region(hcd->rsrc_start, hcd->rsrc_len); + + iounmap(drv_data->usb_phy_reg_base); + release_mem_region(drv_data->usb_phy_res->start, + resource_size(drv_data->usb_phy_res)); + + usb_put_hcd(hcd); + + return 0; +} + +MODULE_ALIAS("platform:pxa168-ehci"); + +static struct platform_driver ehci_pxa168_driver = { + .probe = ehci_pxa168_drv_probe, + .remove = __exit_p(ehci_pxa168_drv_remove), + .shutdown = usb_hcd_platform_shutdown, + .driver.name = "pxa168-ehci", +}; diff --git a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c index 0917e3a32465..4e4066c35a09 100644 --- a/drivers/usb/host/ehci-q.c +++ b/drivers/usb/host/ehci-q.c @@ -111,8 +111,6 @@ qh_update (struct ehci_hcd *ehci, struct ehci_qh *qh, struct ehci_qtd *qtd) } } - /* HC must see latest qtd and qh data before we clear ACTIVE+HALT */ - wmb (); hw->hw_token &= cpu_to_hc32(ehci, QTD_TOGGLE | QTD_STS_PING); } @@ -153,7 +151,7 @@ static void ehci_clear_tt_buffer_complete(struct usb_hcd *hcd, spin_lock_irqsave(&ehci->lock, flags); qh->clearing_tt = 0; if (qh->qh_state == QH_STATE_IDLE && !list_empty(&qh->qtd_list) - && HC_IS_RUNNING(hcd->state)) + && ehci->rh_state == EHCI_RH_RUNNING) qh_link_async(ehci, qh); spin_unlock_irqrestore(&ehci->lock, flags); } @@ -425,7 +423,7 @@ qh_completions (struct ehci_hcd *ehci, struct ehci_qh *qh) /* stop scanning when we reach qtds the hc is using */ } else if (likely (!stopped - && HC_IS_RUNNING (ehci_to_hcd(ehci)->state))) { + && ehci->rh_state == EHCI_RH_RUNNING)) { break; /* scan the whole queue for unlinks whenever it stops */ @@ -433,7 +431,7 @@ qh_completions (struct ehci_hcd *ehci, struct ehci_qh *qh) stopped = 1; /* cancel everything if we halt, suspend, etc */ - if (!HC_IS_RUNNING(ehci_to_hcd(ehci)->state)) + if (ehci->rh_state != EHCI_RH_RUNNING) last_status = -ESHUTDOWN; /* this qtd is active; skip it unless a previous qtd @@ -724,7 +722,8 @@ qh_urb_transaction ( /* * control requests may need a terminating data "status" ack; - * bulk ones may need a terminating short packet (zero length). + * other OUT ones may need a terminating short packet + * (zero length). */ if (likely (urb->transfer_buffer_length != 0)) { int one_more = 0; @@ -733,7 +732,7 @@ qh_urb_transaction ( one_more = 1; token ^= 0x0100; /* "in" <--> "out" */ token |= QTD_TOGGLE; /* force DATA1 */ - } else if (usb_pipebulk (urb->pipe) + } else if (usb_pipeout(urb->pipe) && (urb->transfer_flags & URB_ZERO_PACKET) && !(urb->transfer_buffer_length % maxpacket)) { one_more = 1; @@ -977,9 +976,8 @@ static void qh_link_async (struct ehci_hcd *ehci, struct ehci_qh *qh) /* in case a clear of CMD_ASE didn't take yet */ (void)handshake(ehci, &ehci->regs->status, STS_ASS, 0, 150); - cmd |= CMD_ASE | CMD_RUN; + cmd |= CMD_ASE; ehci_writel(ehci, cmd, &ehci->regs->command); - ehci_to_hcd(ehci)->state = HC_STATE_RUNNING; /* posted write need not be known to HC yet ... */ } } @@ -1058,7 +1056,7 @@ static struct ehci_qh *qh_append_tds ( */ token = qtd->hw_token; qtd->hw_token = HALT_BIT(ehci); - wmb (); + dummy = qh->dummy; dma = dummy->qtd_dma; @@ -1168,14 +1166,13 @@ static void end_unlink_async (struct ehci_hcd *ehci) qh_completions (ehci, qh); - if (!list_empty (&qh->qtd_list) - && HC_IS_RUNNING (ehci_to_hcd(ehci)->state)) + if (!list_empty(&qh->qtd_list) && ehci->rh_state == EHCI_RH_RUNNING) { qh_link_async (ehci, qh); - else { + } else { /* it's not free to turn the async schedule on/off; leave it * active but idle for a while once it empties. */ - if (HC_IS_RUNNING (ehci_to_hcd(ehci)->state) + if (ehci->rh_state == EHCI_RH_RUNNING && ehci->async->qh_next.qh == NULL) timer_action (ehci, TIMER_ASYNC_OFF); } @@ -1211,7 +1208,7 @@ static void start_unlink_async (struct ehci_hcd *ehci, struct ehci_qh *qh) /* stop async schedule right now? */ if (unlikely (qh == ehci->async)) { /* can't get here without STS_ASS set */ - if (ehci_to_hcd(ehci)->state != HC_STATE_HALT + if (ehci->rh_state != EHCI_RH_HALTED && !ehci->reclaim) { /* ... and CMD_IAAD clear */ ehci_writel(ehci, cmd & ~CMD_ASE, @@ -1237,7 +1234,7 @@ static void start_unlink_async (struct ehci_hcd *ehci, struct ehci_qh *qh) wmb (); /* If the controller isn't running, we don't have to wait for it */ - if (unlikely(!HC_IS_RUNNING(ehci_to_hcd(ehci)->state))) { + if (unlikely(ehci->rh_state != EHCI_RH_RUNNING)) { /* if (unlikely (qh->reclaim != 0)) * this will recurse, probably not much */ @@ -1260,7 +1257,7 @@ static void scan_async (struct ehci_hcd *ehci) enum ehci_timer_action action = TIMER_IO_WATCHDOG; timer_action_done (ehci, TIMER_ASYNC_SHRINK); - stopped = !HC_IS_RUNNING(ehci_to_hcd(ehci)->state); + stopped = (ehci->rh_state != EHCI_RH_RUNNING); ehci->qh_scan_next = ehci->async->qh_next.qh; while (ehci->qh_scan_next) { diff --git a/drivers/usb/host/ehci-s5p.c b/drivers/usb/host/ehci-s5p.c index b3958b3d3163..024b65c4990d 100644 --- a/drivers/usb/host/ehci-s5p.c +++ b/drivers/usb/host/ehci-s5p.c @@ -86,6 +86,7 @@ static int __devinit s5p_ehci_probe(struct platform_device *pdev) goto fail_hcd; } + s5p_ehci->hcd = hcd; s5p_ehci->clk = clk_get(&pdev->dev, "usbhost"); if (IS_ERR(s5p_ehci->clk)) { @@ -135,7 +136,7 @@ static int __devinit s5p_ehci_probe(struct platform_device *pdev) /* cache this readonly data; minimize chip reads */ ehci->hcs_params = readl(&ehci->caps->hcs_params); - err = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED); + err = usb_add_hcd(hcd, irq, IRQF_SHARED); if (err) { dev_err(&pdev->dev, "Failed to add USB HCD\n"); goto fail; @@ -269,7 +270,7 @@ static int s5p_ehci_resume(struct device *dev) /* here we "know" root ports should always stay powered */ ehci_port_power(ehci, 1); - hcd->state = HC_STATE_SUSPENDED; + ehci->rh_state = EHCI_RH_SUSPENDED; return 0; } diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c index 2abf8543f083..2e829fae6482 100644 --- a/drivers/usb/host/ehci-sched.c +++ b/drivers/usb/host/ehci-sched.c @@ -36,6 +36,27 @@ static int ehci_get_frame (struct usb_hcd *hcd); +#ifdef CONFIG_PCI + +static unsigned ehci_read_frame_index(struct ehci_hcd *ehci) +{ + unsigned uf; + + /* + * The MosChip MCS9990 controller updates its microframe counter + * a little before the frame counter, and occasionally we will read + * the invalid intermediate value. Avoid problems by checking the + * microframe number (the low-order 3 bits); if they are 0 then + * re-read the register to get the correct value. + */ + uf = ehci_readl(ehci, &ehci->regs->frame_index); + if (unlikely(ehci->frame_index_bug && ((uf & 7) == 0))) + uf = ehci_readl(ehci, &ehci->regs->frame_index); + return uf; +} + +#endif + /*-------------------------------------------------------------------------*/ /* @@ -479,10 +500,9 @@ static int enable_periodic (struct ehci_hcd *ehci) cmd = ehci_readl(ehci, &ehci->regs->command) | CMD_PSE; ehci_writel(ehci, cmd, &ehci->regs->command); /* posted write ... PSS happens later */ - ehci_to_hcd(ehci)->state = HC_STATE_RUNNING; /* make sure ehci_work scans these */ - ehci->next_uframe = ehci_readl(ehci, &ehci->regs->frame_index) + ehci->next_uframe = ehci_read_frame_index(ehci) % (ehci->periodic_size << 3); if (unlikely(ehci->broken_periodic)) ehci->last_periodic_enable = ktime_get_real(); @@ -677,7 +697,7 @@ static void intr_deschedule (struct ehci_hcd *ehci, struct ehci_qh *qh) /* reschedule QH iff another request is queued */ if (!list_empty(&qh->qtd_list) && - HC_IS_RUNNING(ehci_to_hcd(ehci)->state)) { + ehci->rh_state == EHCI_RH_RUNNING) { rc = qh_schedule(ehci, qh); /* An error here likely indicates handshake failure @@ -1409,7 +1429,7 @@ iso_stream_schedule ( goto fail; } - now = ehci_readl(ehci, &ehci->regs->frame_index) & (mod - 1); + now = ehci_read_frame_index(ehci) & (mod - 1); /* Typical case: reuse current schedule, stream is still active. * Hopefully there are no gaps from the host falling behind @@ -2275,8 +2295,8 @@ scan_periodic (struct ehci_hcd *ehci) * Touches as few pages as possible: cache-friendly. */ now_uframe = ehci->next_uframe; - if (HC_IS_RUNNING(ehci_to_hcd(ehci)->state)) { - clock = ehci_readl(ehci, &ehci->regs->frame_index); + if (ehci->rh_state == EHCI_RH_RUNNING) { + clock = ehci_read_frame_index(ehci); clock_frame = (clock >> 3) & (ehci->periodic_size - 1); } else { clock = now_uframe + mod - 1; @@ -2310,7 +2330,7 @@ restart: union ehci_shadow temp; int live; - live = HC_IS_RUNNING (ehci_to_hcd(ehci)->state); + live = (ehci->rh_state == EHCI_RH_RUNNING); switch (hc32_to_cpu(ehci, type)) { case Q_TYPE_QH: /* handle any completions */ @@ -2435,7 +2455,7 @@ restart: * We can't advance our scan without collecting the ISO * transfers that are still pending in this frame. */ - if (incomplete && HC_IS_RUNNING(ehci_to_hcd(ehci)->state)) { + if (incomplete && ehci->rh_state == EHCI_RH_RUNNING) { ehci->next_uframe = now_uframe; break; } @@ -2451,12 +2471,11 @@ restart: if (now_uframe == clock) { unsigned now; - if (!HC_IS_RUNNING (ehci_to_hcd(ehci)->state) + if (ehci->rh_state != EHCI_RH_RUNNING || ehci->periodic_sched == 0) break; ehci->next_uframe = now_uframe; - now = ehci_readl(ehci, &ehci->regs->frame_index) & - (mod - 1); + now = ehci_read_frame_index(ehci) & (mod - 1); if (now_uframe == now) break; diff --git a/drivers/usb/host/ehci-sh.c b/drivers/usb/host/ehci-sh.c index 86a95bb80a61..9d9cf47d80da 100644 --- a/drivers/usb/host/ehci-sh.c +++ b/drivers/usb/host/ehci-sh.c @@ -168,7 +168,7 @@ static int ehci_hcd_sh_probe(struct platform_device *pdev) clk_enable(priv->fclk); clk_enable(priv->iclk); - ret = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED); + ret = usb_add_hcd(hcd, irq, IRQF_SHARED); if (ret != 0) { dev_err(&pdev->dev, "Failed to add hcd"); goto fail_add_hcd; diff --git a/drivers/usb/host/ehci-spear.c b/drivers/usb/host/ehci-spear.c index dbf1e4ef3c17..b115b0b76e33 100644 --- a/drivers/usb/host/ehci-spear.c +++ b/drivers/usb/host/ehci-spear.c @@ -154,7 +154,7 @@ static int spear_ehci_hcd_drv_probe(struct platform_device *pdev) ehci->clk = usbh_clk; spear_start_ehci(ehci); - retval = usb_add_hcd(hcd, irq, IRQF_SHARED | IRQF_DISABLED); + retval = usb_add_hcd(hcd, irq, IRQF_SHARED); if (retval) goto fail_add_hcd; diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c index 02b2bfd49a10..db9d1b4bfbdc 100644 --- a/drivers/usb/host/ehci-tegra.c +++ b/drivers/usb/host/ehci-tegra.c @@ -674,7 +674,7 @@ static int tegra_ehci_probe(struct platform_device *pdev) } #endif - err = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED); + err = usb_add_hcd(hcd, irq, IRQF_SHARED); if (err) { dev_err(&pdev->dev, "Failed to add USB HCD\n"); goto fail; diff --git a/drivers/usb/host/ehci-vt8500.c b/drivers/usb/host/ehci-vt8500.c index 47d749631bc7..54d1ab8aec49 100644 --- a/drivers/usb/host/ehci-vt8500.c +++ b/drivers/usb/host/ehci-vt8500.c @@ -133,7 +133,7 @@ static int vt8500_ehci_drv_probe(struct platform_device *pdev) ehci_port_power(ehci, 1); ret = usb_add_hcd(hcd, pdev->resource[1].start, - IRQF_DISABLED | IRQF_SHARED); + IRQF_SHARED); if (ret == 0) { platform_set_drvdata(pdev, hcd); return ret; diff --git a/drivers/usb/host/ehci-xls.c b/drivers/usb/host/ehci-xls.c new file mode 100644 index 000000000000..fe74bd676018 --- /dev/null +++ b/drivers/usb/host/ehci-xls.c @@ -0,0 +1,161 @@ +/* + * EHCI HCD for Netlogic XLS processors. + * + * (C) Copyright 2011 Netlogic Microsystems Inc. + * + * Based on various ehci-*.c drivers + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive for + * more details. + */ + +#include <linux/platform_device.h> + +static int ehci_xls_setup(struct usb_hcd *hcd) +{ + int retval; + struct ehci_hcd *ehci = hcd_to_ehci(hcd); + + ehci->caps = hcd->regs; + ehci->regs = hcd->regs + + HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase)); + dbg_hcs_params(ehci, "reset"); + dbg_hcc_params(ehci, "reset"); + + /* cache this readonly data; minimize chip reads */ + ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params); + + retval = ehci_halt(ehci); + if (retval) + return retval; + + /* data structure init */ + retval = ehci_init(hcd); + if (retval) + return retval; + + ehci_reset(ehci); + + return retval; +} + +int ehci_xls_probe_internal(const struct hc_driver *driver, + struct platform_device *pdev) +{ + struct usb_hcd *hcd; + struct resource *res; + int retval, irq; + + /* Get our IRQ from an earlier registered Platform Resource */ + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + dev_err(&pdev->dev, "Found HC with no IRQ. Check %s setup!\n", + dev_name(&pdev->dev)); + return -ENODEV; + } + + /* Get our Memory Handle */ + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(&pdev->dev, "Error: MMIO Handle %s setup!\n", + dev_name(&pdev->dev)); + return -ENODEV; + } + hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev)); + if (!hcd) { + retval = -ENOMEM; + goto err1; + } + + hcd->rsrc_start = res->start; + hcd->rsrc_len = res->end - res->start + 1; + + if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, + driver->description)) { + dev_dbg(&pdev->dev, "controller already in use\n"); + retval = -EBUSY; + goto err2; + } + hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len); + + if (hcd->regs == NULL) { + dev_dbg(&pdev->dev, "error mapping memory\n"); + retval = -EFAULT; + goto err3; + } + + retval = usb_add_hcd(hcd, irq, IRQF_SHARED); + if (retval != 0) + goto err4; + return retval; + +err4: + iounmap(hcd->regs); +err3: + release_mem_region(hcd->rsrc_start, hcd->rsrc_len); +err2: + usb_put_hcd(hcd); +err1: + dev_err(&pdev->dev, "init %s fail, %d\n", dev_name(&pdev->dev), + retval); + return retval; +} + +static struct hc_driver ehci_xls_hc_driver = { + .description = hcd_name, + .product_desc = "XLS EHCI Host Controller", + .hcd_priv_size = sizeof(struct ehci_hcd), + .irq = ehci_irq, + .flags = HCD_USB2 | HCD_MEMORY, + .reset = ehci_xls_setup, + .start = ehci_run, + .stop = ehci_stop, + .shutdown = ehci_shutdown, + + .urb_enqueue = ehci_urb_enqueue, + .urb_dequeue = ehci_urb_dequeue, + .endpoint_disable = ehci_endpoint_disable, + .endpoint_reset = ehci_endpoint_reset, + + .get_frame_number = ehci_get_frame, + + .hub_status_data = ehci_hub_status_data, + .hub_control = ehci_hub_control, + .bus_suspend = ehci_bus_suspend, + .bus_resume = ehci_bus_resume, + .relinquish_port = ehci_relinquish_port, + .port_handed_over = ehci_port_handed_over, + + .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete, +}; + +static int ehci_xls_probe(struct platform_device *pdev) +{ + if (usb_disabled()) + return -ENODEV; + + return ehci_xls_probe_internal(&ehci_xls_hc_driver, pdev); +} + +static int ehci_xls_remove(struct platform_device *pdev) +{ + struct usb_hcd *hcd = platform_get_drvdata(pdev); + + usb_remove_hcd(hcd); + iounmap(hcd->regs); + release_mem_region(hcd->rsrc_start, hcd->rsrc_len); + usb_put_hcd(hcd); + return 0; +} + +MODULE_ALIAS("ehci-xls"); + +static struct platform_driver ehci_xls_driver = { + .probe = ehci_xls_probe, + .remove = ehci_xls_remove, + .shutdown = usb_hcd_platform_shutdown, + .driver = { + .name = "ehci-xls", + }, +}; diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h index cc7d337ec355..0a5fda73b3f2 100644 --- a/drivers/usb/host/ehci.h +++ b/drivers/usb/host/ehci.h @@ -62,6 +62,12 @@ struct ehci_stats { #define EHCI_MAX_ROOT_PORTS 15 /* see HCS_N_PORTS */ +enum ehci_rh_state { + EHCI_RH_HALTED, + EHCI_RH_SUSPENDED, + EHCI_RH_RUNNING +}; + struct ehci_hcd { /* one per controller */ /* glue to PCI and HCD framework */ struct ehci_caps __iomem *caps; @@ -70,6 +76,7 @@ struct ehci_hcd { /* one per controller */ __u32 hcs_params; /* cached register copy */ spinlock_t lock; + enum ehci_rh_state rh_state; /* async schedule support */ struct ehci_qh *async; @@ -139,6 +146,7 @@ struct ehci_hcd { /* one per controller */ unsigned fs_i_thresh:1; /* Intel iso scheduling */ unsigned use_dummy_qh:1; /* AMD Frame List table quirk*/ unsigned has_synopsys_hc_bug:1; /* Synopsys HC */ + unsigned frame_index_bug:1; /* MosChip (AKA NetMos) */ /* required for usb32 quirk */ #define OHCI_CTRL_HCFS (3 << 6) @@ -740,6 +748,22 @@ static inline u32 hc32_to_cpup (const struct ehci_hcd *ehci, const __hc32 *x) /*-------------------------------------------------------------------------*/ +#ifdef CONFIG_PCI + +/* For working around the MosChip frame-index-register bug */ +static unsigned ehci_read_frame_index(struct ehci_hcd *ehci); + +#else + +static inline unsigned ehci_read_frame_index(struct ehci_hcd *ehci) +{ + return ehci_readl(ehci, &ehci->regs->frame_index); +} + +#endif + +/*-------------------------------------------------------------------------*/ + #ifndef DEBUG #define STUB_DEBUG_FILES #endif /* DEBUG */ diff --git a/drivers/usb/host/fhci-hcd.c b/drivers/usb/host/fhci-hcd.c index 572ea53b0226..4ed6d19f2a54 100644 --- a/drivers/usb/host/fhci-hcd.c +++ b/drivers/usb/host/fhci-hcd.c @@ -621,12 +621,15 @@ static int __devinit of_fhci_probe(struct platform_device *ofdev) goto err_pram; } - pram_addr = cpm_muram_alloc_fixed(iprop[2], FHCI_PRAM_SIZE); + pram_addr = cpm_muram_alloc(FHCI_PRAM_SIZE, 64); if (IS_ERR_VALUE(pram_addr)) { dev_err(dev, "failed to allocate usb pram\n"); ret = -ENOMEM; goto err_pram; } + + qe_issue_cmd(QE_ASSIGN_PAGE_TO_DEVICE, QE_CR_SUBBLOCK_USB, + QE_CR_PROTOCOL_UNSPECIFIED, pram_addr); fhci->pram = cpm_muram_addr(pram_addr); /* GPIOs and pins */ @@ -686,7 +689,7 @@ static int __devinit of_fhci_probe(struct platform_device *ofdev) } ret = request_irq(fhci->timer->irq, fhci_frame_limit_timer_irq, - IRQF_DISABLED, "qe timer (usb)", hcd); + 0, "qe timer (usb)", hcd); if (ret) { dev_err(dev, "failed to request timer irq"); goto err_timer_irq; @@ -745,7 +748,7 @@ static int __devinit of_fhci_probe(struct platform_device *ofdev) out_be16(&fhci->regs->usb_event, 0xffff); out_be16(&fhci->regs->usb_mask, 0); - ret = usb_add_hcd(hcd, usb_irq, IRQF_DISABLED); + ret = usb_add_hcd(hcd, usb_irq, 0); if (ret < 0) goto err_add_hcd; diff --git a/drivers/usb/host/fhci-sched.c b/drivers/usb/host/fhci-sched.c index a42ef380e917..2df851b4bc7c 100644 --- a/drivers/usb/host/fhci-sched.c +++ b/drivers/usb/host/fhci-sched.c @@ -1,7 +1,7 @@ /* * Freescale QUICC Engine USB Host Controller Driver * - * Copyright (c) Freescale Semicondutor, Inc. 2006. + * Copyright (c) Freescale Semicondutor, Inc. 2006, 2011. * Shlomi Gridish <gridish@freescale.com> * Jerry Huang <Chang-Ming.Huang@freescale.com> * Copyright (c) Logic Product Development, Inc. 2007 @@ -810,9 +810,11 @@ void fhci_queue_urb(struct fhci_hcd *fhci, struct urb *urb) ed->dev_addr = usb_pipedevice(urb->pipe); ed->max_pkt_size = usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe)); + /* setup stage */ td = fhci_td_fill(fhci, urb, urb_priv, ed, cnt++, FHCI_TA_SETUP, USB_TD_TOGGLE_DATA0, urb->setup_packet, 8, 0, 0, true); + /* data stage */ if (data_len > 0) { td = fhci_td_fill(fhci, urb, urb_priv, ed, cnt++, usb_pipeout(urb->pipe) ? FHCI_TA_OUT : @@ -820,9 +822,18 @@ void fhci_queue_urb(struct fhci_hcd *fhci, struct urb *urb) USB_TD_TOGGLE_DATA1, data, data_len, 0, 0, true); } - td = fhci_td_fill(fhci, urb, urb_priv, ed, cnt++, - usb_pipeout(urb->pipe) ? FHCI_TA_IN : FHCI_TA_OUT, - USB_TD_TOGGLE_DATA1, data, 0, 0, 0, true); + + /* status stage */ + if (data_len > 0) + td = fhci_td_fill(fhci, urb, urb_priv, ed, cnt++, + (usb_pipeout(urb->pipe) ? FHCI_TA_IN : + FHCI_TA_OUT), + USB_TD_TOGGLE_DATA1, data, 0, 0, 0, true); + else + td = fhci_td_fill(fhci, urb, urb_priv, ed, cnt++, + FHCI_TA_IN, + USB_TD_TOGGLE_DATA1, data, 0, 0, 0, true); + urb_state = US_CTRL_SETUP; break; case FHCI_TF_ISO: diff --git a/drivers/usb/host/imx21-hcd.c b/drivers/usb/host/imx21-hcd.c index af05718bdc73..2ee18cfa1efe 100644 --- a/drivers/usb/host/imx21-hcd.c +++ b/drivers/usb/host/imx21-hcd.c @@ -1891,7 +1891,7 @@ static int imx21_probe(struct platform_device *pdev) dev_info(imx21->dev, "Hardware HC revision: 0x%02X\n", (readl(imx21->regs + USBOTG_HWMODE) >> 16) & 0xFF); - ret = usb_add_hcd(hcd, irq, IRQF_DISABLED); + ret = usb_add_hcd(hcd, irq, 0); if (ret != 0) { dev_err(imx21->dev, "usb_add_hcd() returned %d\n", ret); goto failed_add_hcd; diff --git a/drivers/usb/host/isp116x-hcd.c b/drivers/usb/host/isp116x-hcd.c index baae4ccd16ac..d91e5f211a76 100644 --- a/drivers/usb/host/isp116x-hcd.c +++ b/drivers/usb/host/isp116x-hcd.c @@ -1639,7 +1639,7 @@ static int __devinit isp116x_probe(struct platform_device *pdev) goto err6; } - ret = usb_add_hcd(hcd, irq, irqflags | IRQF_DISABLED); + ret = usb_add_hcd(hcd, irq, irqflags); if (ret) goto err6; diff --git a/drivers/usb/host/isp1362-hcd.c b/drivers/usb/host/isp1362-hcd.c index 9c37dad3e816..e5fd8aa57af1 100644 --- a/drivers/usb/host/isp1362-hcd.c +++ b/drivers/usb/host/isp1362-hcd.c @@ -2358,7 +2358,7 @@ static int isp1362_hc_reset(struct usb_hcd *hcd) unsigned long flags; int clkrdy = 0; - pr_info("%s:\n", __func__); + pr_debug("%s:\n", __func__); if (isp1362_hcd->board && isp1362_hcd->board->reset) { isp1362_hcd->board->reset(hcd->self.controller, 1); @@ -2395,7 +2395,7 @@ static void isp1362_hc_stop(struct usb_hcd *hcd) unsigned long flags; u32 tmp; - pr_info("%s:\n", __func__); + pr_debug("%s:\n", __func__); del_timer_sync(&hcd->rh_timer); @@ -2523,7 +2523,7 @@ static int isp1362_hc_start(struct usb_hcd *hcd) u16 chipid; unsigned long flags; - pr_info("%s:\n", __func__); + pr_debug("%s:\n", __func__); spin_lock_irqsave(&isp1362_hcd->lock, flags); chipid = isp1362_read_reg16(isp1362_hcd, HCCHIPID); @@ -2773,7 +2773,7 @@ static int __devinit isp1362_probe(struct platform_device *pdev) if (irq_res->flags & IORESOURCE_IRQ_LOWLEVEL) irq_flags |= IRQF_TRIGGER_LOW; - retval = usb_add_hcd(hcd, irq, irq_flags | IRQF_DISABLED | IRQF_SHARED); + retval = usb_add_hcd(hcd, irq, irq_flags | IRQF_SHARED); if (retval != 0) goto err6; pr_info("%s, irq %d\n", hcd->product_desc, irq); diff --git a/drivers/usb/host/isp1760-hcd.c b/drivers/usb/host/isp1760-hcd.c index 840beda66dd9..27dfab80ed8f 100644 --- a/drivers/usb/host/isp1760-hcd.c +++ b/drivers/usb/host/isp1760-hcd.c @@ -21,8 +21,10 @@ #include <linux/uaccess.h> #include <linux/io.h> #include <linux/mm.h> +#include <linux/timer.h> #include <asm/unaligned.h> #include <asm/cacheflush.h> +#include <linux/gpio.h> #include "isp1760-hcd.h" @@ -39,7 +41,6 @@ struct isp1760_hcd { int int_done_map; struct memory_chunk memory_pool[BLOCKS]; struct list_head controlqhs, bulkqhs, interruptqhs; - int active_ptds; /* periodic schedule support */ #define DEFAULT_I_TDPS 1024 @@ -48,6 +49,8 @@ struct isp1760_hcd { unsigned long reset_done; unsigned long next_statechange; unsigned int devflags; + + int rst_gpio; }; static inline struct isp1760_hcd *hcd_to_priv(struct usb_hcd *hcd) @@ -114,6 +117,7 @@ struct isp1760_qh { u32 toggle; u32 ping; int slot; + int tt_buffer_dirty; /* See USB2.0 spec section 11.17.5 */ }; struct urb_listitem { @@ -432,6 +436,18 @@ static int isp1760_hc_setup(struct usb_hcd *hcd) int result; u32 scratch, hwmode; + /* low-level chip reset */ + if (gpio_is_valid(priv->rst_gpio)) { + unsigned int rst_lvl; + + rst_lvl = (priv->devflags & + ISP1760_FLAG_RESET_ACTIVE_HIGH) ? 1 : 0; + + gpio_set_value(priv->rst_gpio, rst_lvl); + mdelay(50); + gpio_set_value(priv->rst_gpio, !rst_lvl); + } + /* Setup HW Mode Control: This assumes a level active-low interrupt */ hwmode = HW_DATA_BUS_32BIT; @@ -489,10 +505,6 @@ static int isp1760_hc_setup(struct usb_hcd *hcd) 16 : 32, (priv->devflags & ISP1760_FLAG_ANALOG_OC) ? "analog" : "digital"); - /* This is weird: at the first plug-in of a device there seems to be - one packet queued that never gets returned? */ - priv->active_ptds = -1; - /* ATL reset */ reg_write32(hcd->regs, HC_HW_MODE_CTRL, hwmode | ALL_ATX_RESET); mdelay(10); @@ -514,83 +526,6 @@ static int isp1760_hc_setup(struct usb_hcd *hcd) return priv_init(hcd); } -static void isp1760_init_maps(struct usb_hcd *hcd) -{ - /*set last maps, for iso its only 1, else 32 tds bitmap*/ - reg_write32(hcd->regs, HC_ATL_PTD_LASTPTD_REG, 0x80000000); - reg_write32(hcd->regs, HC_INT_PTD_LASTPTD_REG, 0x80000000); - reg_write32(hcd->regs, HC_ISO_PTD_LASTPTD_REG, 0x00000001); - - reg_write32(hcd->regs, HC_ATL_PTD_SKIPMAP_REG, 0xffffffff); - reg_write32(hcd->regs, HC_INT_PTD_SKIPMAP_REG, 0xffffffff); - reg_write32(hcd->regs, HC_ISO_PTD_SKIPMAP_REG, 0xffffffff); - - reg_write32(hcd->regs, HC_BUFFER_STATUS_REG, - ATL_BUF_FILL | INT_BUF_FILL); -} - -static void isp1760_enable_interrupts(struct usb_hcd *hcd) -{ - reg_write32(hcd->regs, HC_ATL_IRQ_MASK_AND_REG, 0); - reg_write32(hcd->regs, HC_ATL_IRQ_MASK_OR_REG, 0xffffffff); - reg_write32(hcd->regs, HC_INT_IRQ_MASK_AND_REG, 0); - reg_write32(hcd->regs, HC_INT_IRQ_MASK_OR_REG, 0xffffffff); - reg_write32(hcd->regs, HC_ISO_IRQ_MASK_AND_REG, 0); - reg_write32(hcd->regs, HC_ISO_IRQ_MASK_OR_REG, 0xffffffff); - /* step 23 passed */ -} - -static int isp1760_run(struct usb_hcd *hcd) -{ - int retval; - u32 temp; - u32 command; - u32 chipid; - - hcd->uses_new_polling = 1; - - hcd->state = HC_STATE_RUNNING; - isp1760_enable_interrupts(hcd); - temp = reg_read32(hcd->regs, HC_HW_MODE_CTRL); - reg_write32(hcd->regs, HC_HW_MODE_CTRL, temp | HW_GLOBAL_INTR_EN); - - command = reg_read32(hcd->regs, HC_USBCMD); - command &= ~(CMD_LRESET|CMD_RESET); - command |= CMD_RUN; - reg_write32(hcd->regs, HC_USBCMD, command); - - retval = handshake(hcd, HC_USBCMD, CMD_RUN, CMD_RUN, 250 * 1000); - if (retval) - return retval; - - /* - * XXX - * Spec says to write FLAG_CF as last config action, priv code grabs - * the semaphore while doing so. - */ - down_write(&ehci_cf_port_reset_rwsem); - reg_write32(hcd->regs, HC_CONFIGFLAG, FLAG_CF); - - retval = handshake(hcd, HC_CONFIGFLAG, FLAG_CF, FLAG_CF, 250 * 1000); - up_write(&ehci_cf_port_reset_rwsem); - if (retval) - return retval; - - chipid = reg_read32(hcd->regs, HC_CHIP_ID_REG); - dev_info(hcd->self.controller, "USB ISP %04x HW rev. %d started\n", - chipid & 0xffff, chipid >> 16); - - /* PTD Register Init Part 2, Step 28 */ - /* enable INTs */ - isp1760_init_maps(hcd); - - /* GRR this is run-once init(), being done every time the HC starts. - * So long as they're part of class devices, we can't do it init() - * since the class device isn't created that early. - */ - return 0; -} - static u32 base_to_chip(u32 base) { return ((base - 0x400) >> 3); @@ -813,28 +748,29 @@ static void start_bus_transfer(struct usb_hcd *hcd, u32 ptd_offset, int slot, WARN_ON(slots[slot].qh); WARN_ON(qtd->status != QTD_PAYLOAD_ALLOC); - slots[slot].qtd = qtd; - slots[slot].qh = qh; - qh->slot = slot; - qtd->status = QTD_XFER_STARTED; /* Set this before writing ptd, since - interrupt routine may preempt and expects this value. */ - ptd_write(hcd->regs, ptd_offset, slot, ptd); - priv->active_ptds++; - /* Make sure done map has not triggered from some unlinked transfer */ if (ptd_offset == ATL_PTD_OFFSET) { priv->atl_done_map |= reg_read32(hcd->regs, HC_ATL_PTD_DONEMAP_REG); - priv->atl_done_map &= ~(1 << qh->slot); + priv->atl_done_map &= ~(1 << slot); + } else { + priv->int_done_map |= reg_read32(hcd->regs, + HC_INT_PTD_DONEMAP_REG); + priv->int_done_map &= ~(1 << slot); + } + + qh->slot = slot; + qtd->status = QTD_XFER_STARTED; + slots[slot].timestamp = jiffies; + slots[slot].qtd = qtd; + slots[slot].qh = qh; + ptd_write(hcd->regs, ptd_offset, slot, ptd); + if (ptd_offset == ATL_PTD_OFFSET) { skip_map = reg_read32(hcd->regs, HC_ATL_PTD_SKIPMAP_REG); skip_map &= ~(1 << qh->slot); reg_write32(hcd->regs, HC_ATL_PTD_SKIPMAP_REG, skip_map); } else { - priv->int_done_map |= reg_read32(hcd->regs, - HC_INT_PTD_DONEMAP_REG); - priv->int_done_map &= ~(1 << qh->slot); - skip_map = reg_read32(hcd->regs, HC_INT_PTD_SKIPMAP_REG); skip_map &= ~(1 << qh->slot); reg_write32(hcd->regs, HC_INT_PTD_SKIPMAP_REG, skip_map); @@ -858,10 +794,7 @@ static void collect_qtds(struct usb_hcd *hcd, struct isp1760_qh *qh, if (qtd->status < QTD_XFER_COMPLETE) break; - if (list_is_last(&qtd->qtd_list, &qh->qtd_list)) - last_qtd = 1; - else - last_qtd = qtd->urb != qtd_next->urb; + last_qtd = last_qtd_of_urb(qtd, qh); if ((!last_qtd) && (qtd->status == QTD_RETIRE)) qtd_next->status = QTD_RETIRE; @@ -902,7 +835,7 @@ static void collect_qtds(struct usb_hcd *hcd, struct isp1760_qh *qh, urb_listitem = kmem_cache_zalloc(urb_listitem_cachep, GFP_ATOMIC); if (unlikely(!urb_listitem)) - break; + break; /* Try again on next call */ urb_listitem->urb = qtd->urb; list_add_tail(&urb_listitem->urb_list, urb_list); } @@ -928,6 +861,10 @@ static void enqueue_qtds(struct usb_hcd *hcd, struct isp1760_qh *qh) return; } + /* Make sure this endpoint's TT buffer is clean before queueing ptds */ + if (qh->tt_buffer_dirty) + return; + if (usb_pipeint(list_entry(qh->qtd_list.next, struct isp1760_qtd, qtd_list)->urb->pipe)) { ptd_offset = INT_PTD_OFFSET; @@ -1168,11 +1105,9 @@ static int check_atl_transfer(struct usb_hcd *hcd, struct ptd *ptd, return PTD_STATE_QTD_DONE; } -static irqreturn_t isp1760_irq(struct usb_hcd *hcd) +static void handle_done_ptds(struct usb_hcd *hcd) { struct isp1760_hcd *priv = hcd_to_priv(hcd); - u32 imask; - irqreturn_t irqret = IRQ_NONE; struct ptd ptd; struct isp1760_qh *qh; int slot; @@ -1181,27 +1116,14 @@ static irqreturn_t isp1760_irq(struct usb_hcd *hcd) u32 ptd_offset; struct isp1760_qtd *qtd; int modified; - static int last_active_ptds; - int int_skip_map, atl_skip_map; - - spin_lock(&priv->lock); - - if (!(hcd->state & HC_STATE_RUNNING)) - goto leave; - - imask = reg_read32(hcd->regs, HC_INTERRUPT_REG); - if (unlikely(!imask)) - goto leave; - reg_write32(hcd->regs, HC_INTERRUPT_REG, imask); /* Clear */ + int skip_map; - int_skip_map = reg_read32(hcd->regs, HC_INT_PTD_SKIPMAP_REG); - atl_skip_map = reg_read32(hcd->regs, HC_ATL_PTD_SKIPMAP_REG); - priv->int_done_map |= reg_read32(hcd->regs, HC_INT_PTD_DONEMAP_REG); - priv->atl_done_map |= reg_read32(hcd->regs, HC_ATL_PTD_DONEMAP_REG); - priv->int_done_map &= ~int_skip_map; - priv->atl_done_map &= ~atl_skip_map; + skip_map = reg_read32(hcd->regs, HC_INT_PTD_SKIPMAP_REG); + priv->int_done_map &= ~skip_map; + skip_map = reg_read32(hcd->regs, HC_ATL_PTD_SKIPMAP_REG); + priv->atl_done_map &= ~skip_map; - modified = priv->int_done_map | priv->atl_done_map; + modified = priv->int_done_map || priv->atl_done_map; while (priv->int_done_map || priv->atl_done_map) { if (priv->int_done_map) { @@ -1240,7 +1162,6 @@ static irqreturn_t isp1760_irq(struct usb_hcd *hcd) slots[slot].qtd = NULL; qh = slots[slot].qh; slots[slot].qh = NULL; - priv->active_ptds--; qh->slot = -1; WARN_ON(qtd->status != QTD_XFER_STARTED); @@ -1281,6 +1202,15 @@ static irqreturn_t isp1760_irq(struct usb_hcd *hcd) case PTD_STATE_URB_RETIRE: qtd->status = QTD_RETIRE; + if ((qtd->urb->dev->speed != USB_SPEED_HIGH) && + (qtd->urb->status != -EPIPE) && + (qtd->urb->status != -EREMOTEIO)) { + qh->tt_buffer_dirty = 1; + if (usb_hub_clear_tt_buffer(qtd->urb)) + /* Clear failed; let's hope things work + anyway */ + qh->tt_buffer_dirty = 0; + } qtd = NULL; qh->toggle = 0; qh->ping = 0; @@ -1311,22 +1241,28 @@ static irqreturn_t isp1760_irq(struct usb_hcd *hcd) if (modified) schedule_ptds(hcd); +} - /* ISP1760 Errata 2 explains that interrupts may be missed (or not - happen?) if two USB devices are running simultaneously. Perhaps - this happens when a PTD is finished during interrupt handling; - enable SOF interrupts if PTDs are still scheduled when exiting this - interrupt handler, just to be safe. */ +static irqreturn_t isp1760_irq(struct usb_hcd *hcd) +{ + struct isp1760_hcd *priv = hcd_to_priv(hcd); + u32 imask; + irqreturn_t irqret = IRQ_NONE; - if (priv->active_ptds != last_active_ptds) { - if (priv->active_ptds > 0) - reg_write32(hcd->regs, HC_INTERRUPT_ENABLE, - INTERRUPT_ENABLE_SOT_MASK); - else - reg_write32(hcd->regs, HC_INTERRUPT_ENABLE, - INTERRUPT_ENABLE_MASK); - last_active_ptds = priv->active_ptds; - } + spin_lock(&priv->lock); + + if (!(hcd->state & HC_STATE_RUNNING)) + goto leave; + + imask = reg_read32(hcd->regs, HC_INTERRUPT_REG); + if (unlikely(!imask)) + goto leave; + reg_write32(hcd->regs, HC_INTERRUPT_REG, imask); /* Clear */ + + priv->int_done_map |= reg_read32(hcd->regs, HC_INT_PTD_DONEMAP_REG); + priv->atl_done_map |= reg_read32(hcd->regs, HC_ATL_PTD_DONEMAP_REG); + + handle_done_ptds(hcd); irqret = IRQ_HANDLED; leave: @@ -1335,6 +1271,138 @@ leave: return irqret; } +/* + * Workaround for problem described in chip errata 2: + * + * Sometimes interrupts are not generated when ATL (not INT?) completion occurs. + * One solution suggested in the errata is to use SOF interrupts _instead_of_ + * ATL done interrupts (the "instead of" might be important since it seems + * enabling ATL interrupts also causes the chip to sometimes - rarely - "forget" + * to set the PTD's done bit in addition to not generating an interrupt!). + * + * So if we use SOF + ATL interrupts, we sometimes get stale PTDs since their + * done bit is not being set. This is bad - it blocks the endpoint until reboot. + * + * If we use SOF interrupts only, we get latency between ptd completion and the + * actual handling. This is very noticeable in testusb runs which takes several + * minutes longer without ATL interrupts. + * + * A better solution is to run the code below every SLOT_CHECK_PERIOD ms. If it + * finds active ATL slots which are older than SLOT_TIMEOUT ms, it checks the + * slot's ACTIVE and VALID bits. If these are not set, the ptd is considered + * completed and its done map bit is set. + * + * The values of SLOT_TIMEOUT and SLOT_CHECK_PERIOD have been arbitrarily chosen + * not to cause too much lag when this HW bug occurs, while still hopefully + * ensuring that the check does not falsely trigger. + */ +#define SLOT_TIMEOUT 300 +#define SLOT_CHECK_PERIOD 200 +static struct timer_list errata2_timer; + +void errata2_function(unsigned long data) +{ + struct usb_hcd *hcd = (struct usb_hcd *) data; + struct isp1760_hcd *priv = hcd_to_priv(hcd); + int slot; + struct ptd ptd; + unsigned long spinflags; + + spin_lock_irqsave(&priv->lock, spinflags); + + for (slot = 0; slot < 32; slot++) + if (priv->atl_slots[slot].qh && time_after(jiffies, + priv->atl_slots[slot].timestamp + + SLOT_TIMEOUT * HZ / 1000)) { + ptd_read(hcd->regs, ATL_PTD_OFFSET, slot, &ptd); + if (!FROM_DW0_VALID(ptd.dw0) && + !FROM_DW3_ACTIVE(ptd.dw3)) + priv->atl_done_map |= 1 << slot; + } + + if (priv->atl_done_map) + handle_done_ptds(hcd); + + spin_unlock_irqrestore(&priv->lock, spinflags); + + errata2_timer.expires = jiffies + SLOT_CHECK_PERIOD * HZ / 1000; + add_timer(&errata2_timer); +} + +static int isp1760_run(struct usb_hcd *hcd) +{ + int retval; + u32 temp; + u32 command; + u32 chipid; + + hcd->uses_new_polling = 1; + + hcd->state = HC_STATE_RUNNING; + + /* Set PTD interrupt AND & OR maps */ + reg_write32(hcd->regs, HC_ATL_IRQ_MASK_AND_REG, 0); + reg_write32(hcd->regs, HC_ATL_IRQ_MASK_OR_REG, 0xffffffff); + reg_write32(hcd->regs, HC_INT_IRQ_MASK_AND_REG, 0); + reg_write32(hcd->regs, HC_INT_IRQ_MASK_OR_REG, 0xffffffff); + reg_write32(hcd->regs, HC_ISO_IRQ_MASK_AND_REG, 0); + reg_write32(hcd->regs, HC_ISO_IRQ_MASK_OR_REG, 0xffffffff); + /* step 23 passed */ + + temp = reg_read32(hcd->regs, HC_HW_MODE_CTRL); + reg_write32(hcd->regs, HC_HW_MODE_CTRL, temp | HW_GLOBAL_INTR_EN); + + command = reg_read32(hcd->regs, HC_USBCMD); + command &= ~(CMD_LRESET|CMD_RESET); + command |= CMD_RUN; + reg_write32(hcd->regs, HC_USBCMD, command); + + retval = handshake(hcd, HC_USBCMD, CMD_RUN, CMD_RUN, 250 * 1000); + if (retval) + return retval; + + /* + * XXX + * Spec says to write FLAG_CF as last config action, priv code grabs + * the semaphore while doing so. + */ + down_write(&ehci_cf_port_reset_rwsem); + reg_write32(hcd->regs, HC_CONFIGFLAG, FLAG_CF); + + retval = handshake(hcd, HC_CONFIGFLAG, FLAG_CF, FLAG_CF, 250 * 1000); + up_write(&ehci_cf_port_reset_rwsem); + if (retval) + return retval; + + init_timer(&errata2_timer); + errata2_timer.function = errata2_function; + errata2_timer.data = (unsigned long) hcd; + errata2_timer.expires = jiffies + SLOT_CHECK_PERIOD * HZ / 1000; + add_timer(&errata2_timer); + + chipid = reg_read32(hcd->regs, HC_CHIP_ID_REG); + dev_info(hcd->self.controller, "USB ISP %04x HW rev. %d started\n", + chipid & 0xffff, chipid >> 16); + + /* PTD Register Init Part 2, Step 28 */ + + /* Setup registers controlling PTD checking */ + reg_write32(hcd->regs, HC_ATL_PTD_LASTPTD_REG, 0x80000000); + reg_write32(hcd->regs, HC_INT_PTD_LASTPTD_REG, 0x80000000); + reg_write32(hcd->regs, HC_ISO_PTD_LASTPTD_REG, 0x00000001); + reg_write32(hcd->regs, HC_ATL_PTD_SKIPMAP_REG, 0xffffffff); + reg_write32(hcd->regs, HC_INT_PTD_SKIPMAP_REG, 0xffffffff); + reg_write32(hcd->regs, HC_ISO_PTD_SKIPMAP_REG, 0xffffffff); + reg_write32(hcd->regs, HC_BUFFER_STATUS_REG, + ATL_BUF_FILL | INT_BUF_FILL); + + /* GRR this is run-once init(), being done every time the HC starts. + * So long as they're part of class devices, we can't do it init() + * since the class device isn't created that early. + */ + return 0; +} + static int qtd_fill(struct isp1760_qtd *qtd, void *databuffer, size_t len) { qtd->data_buffer = databuffer; @@ -1503,7 +1571,6 @@ static int isp1760_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, packetize_urb(hcd, urb, &new_qtds, mem_flags); if (list_empty(&new_qtds)) return -ENOMEM; - urb->hcpriv = NULL; /* Used to signal unlink to interrupt handler */ retval = 0; spin_lock_irqsave(&priv->lock, spinflags); @@ -1531,6 +1598,7 @@ static int isp1760_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, qh = qh_alloc(GFP_ATOMIC); if (!qh) { retval = -ENOMEM; + usb_hcd_unlink_urb_from_ep(hcd, urb); goto out; } list_add_tail(&qh->qh_list, ep_queue); @@ -1570,7 +1638,41 @@ static void kill_transfer(struct usb_hcd *hcd, struct urb *urb, } qh->slot = -1; - priv->active_ptds--; +} + +/* + * Retire the qtds beginning at 'qtd' and belonging all to the same urb, killing + * any active transfer belonging to the urb in the process. + */ +static void dequeue_urb_from_qtd(struct usb_hcd *hcd, struct isp1760_qh *qh, + struct isp1760_qtd *qtd) +{ + struct urb *urb; + int urb_was_running; + + urb = qtd->urb; + urb_was_running = 0; + list_for_each_entry_from(qtd, &qh->qtd_list, qtd_list) { + if (qtd->urb != urb) + break; + + if (qtd->status >= QTD_XFER_STARTED) + urb_was_running = 1; + if (last_qtd_of_urb(qtd, qh) && + (qtd->status >= QTD_XFER_COMPLETE)) + urb_was_running = 0; + + if (qtd->status == QTD_XFER_STARTED) + kill_transfer(hcd, urb, qh); + qtd->status = QTD_RETIRE; + } + + if ((urb->dev->speed != USB_SPEED_HIGH) && urb_was_running) { + qh->tt_buffer_dirty = 1; + if (usb_hub_clear_tt_buffer(urb)) + /* Clear failed; let's hope things work anyway */ + qh->tt_buffer_dirty = 0; + } } static int isp1760_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, @@ -1595,9 +1697,8 @@ static int isp1760_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, list_for_each_entry(qtd, &qh->qtd_list, qtd_list) if (qtd->urb == urb) { - if (qtd->status == QTD_XFER_STARTED) - kill_transfer(hcd, urb, qh); - qtd->status = QTD_RETIRE; + dequeue_urb_from_qtd(hcd, qh, qtd); + break; } urb->status = status; @@ -1622,12 +1723,11 @@ static void isp1760_endpoint_disable(struct usb_hcd *hcd, if (!qh) goto out; - list_for_each_entry(qtd, &qh->qtd_list, qtd_list) { - if (qtd->status == QTD_XFER_STARTED) - kill_transfer(hcd, qtd->urb, qh); - qtd->status = QTD_RETIRE; - qtd->urb->status = -ECONNRESET; - } + list_for_each_entry(qtd, &qh->qtd_list, qtd_list) + if (qtd->status != QTD_RETIRE) { + dequeue_urb_from_qtd(hcd, qh, qtd); + qtd->urb->status = -ECONNRESET; + } ep->hcpriv = NULL; /* Cannot free qh here since it will be parsed by schedule_ptds() */ @@ -2021,6 +2121,8 @@ static void isp1760_stop(struct usb_hcd *hcd) struct isp1760_hcd *priv = hcd_to_priv(hcd); u32 temp; + del_timer(&errata2_timer); + isp1760_hub_control(hcd, ClearPortFeature, USB_PORT_FEAT_POWER, 1, NULL, 0); mdelay(20); @@ -2048,6 +2150,23 @@ static void isp1760_shutdown(struct usb_hcd *hcd) reg_write32(hcd->regs, HC_USBCMD, command); } +static void isp1760_clear_tt_buffer_complete(struct usb_hcd *hcd, + struct usb_host_endpoint *ep) +{ + struct isp1760_hcd *priv = hcd_to_priv(hcd); + struct isp1760_qh *qh = ep->hcpriv; + unsigned long spinflags; + + if (!qh) + return; + + spin_lock_irqsave(&priv->lock, spinflags); + qh->tt_buffer_dirty = 0; + schedule_ptds(hcd); + spin_unlock_irqrestore(&priv->lock, spinflags); +} + + static const struct hc_driver isp1760_hc_driver = { .description = "isp1760-hcd", .product_desc = "NXP ISP1760 USB Host Controller", @@ -2064,6 +2183,7 @@ static const struct hc_driver isp1760_hc_driver = { .get_frame_number = isp1760_get_frame, .hub_status_data = isp1760_hub_status_data, .hub_control = isp1760_hub_control, + .clear_tt_buffer_complete = isp1760_clear_tt_buffer_complete, }; int __init init_kmem_once(void) @@ -2102,6 +2222,7 @@ void deinit_kmem_cache(void) struct usb_hcd *isp1760_register(phys_addr_t res_start, resource_size_t res_len, int irq, unsigned long irqflags, + int rst_gpio, struct device *dev, const char *busname, unsigned int devflags) { @@ -2121,6 +2242,7 @@ struct usb_hcd *isp1760_register(phys_addr_t res_start, resource_size_t res_len, priv = hcd_to_priv(hcd); priv->devflags = devflags; + priv->rst_gpio = rst_gpio; init_memory(priv); hcd->regs = ioremap(res_start, res_len); if (!hcd->regs) { diff --git a/drivers/usb/host/isp1760-hcd.h b/drivers/usb/host/isp1760-hcd.h index 014a7dfadf91..33dc79ccaa6b 100644 --- a/drivers/usb/host/isp1760-hcd.h +++ b/drivers/usb/host/isp1760-hcd.h @@ -4,6 +4,7 @@ /* exports for if */ struct usb_hcd *isp1760_register(phys_addr_t res_start, resource_size_t res_len, int irq, unsigned long irqflags, + int rst_gpio, struct device *dev, const char *busname, unsigned int devflags); int init_kmem_once(void); @@ -73,7 +74,6 @@ void deinit_kmem_cache(void); #define HC_EOT_INT (1 << 3) #define HC_SOT_INT (1 << 1) #define INTERRUPT_ENABLE_MASK (HC_INTL_INT | HC_ATL_INT) -#define INTERRUPT_ENABLE_SOT_MASK (HC_SOT_INT) #define HC_ISO_IRQ_MASK_OR_REG 0x318 #define HC_INT_IRQ_MASK_OR_REG 0x31C @@ -107,6 +107,7 @@ struct ptd { struct slotinfo { struct isp1760_qh *qh; struct isp1760_qtd *qtd; + unsigned long timestamp; }; @@ -126,6 +127,7 @@ typedef void (packet_enqueue)(struct usb_hcd *hcd, struct isp1760_qh *qh, #define ISP1760_FLAG_ISP1761 0x00000040 /* Chip is ISP1761 */ #define ISP1760_FLAG_INTR_POL_HIGH 0x00000080 /* Interrupt polarity active high */ #define ISP1760_FLAG_INTR_EDGE_TRIG 0x00000100 /* Interrupt edge triggered */ +#define ISP1760_FLAG_RESET_ACTIVE_HIGH 0x80000000 /* RESET GPIO active high */ /* chip memory management */ struct memory_chunk { @@ -188,6 +190,7 @@ struct memory_chunk { #define DW3_BABBLE_BIT (1 << 29) #define DW3_HALT_BIT (1 << 30) #define DW3_ACTIVE_BIT (1 << 31) +#define FROM_DW3_ACTIVE(x) (((x) >> 31) & 0x01) #define INT_UNDERRUN (1 << 2) #define INT_BABBLE (1 << 1) diff --git a/drivers/usb/host/isp1760-if.c b/drivers/usb/host/isp1760-if.c index 7ee30056f373..2c7fc830c9e4 100644 --- a/drivers/usb/host/isp1760-if.c +++ b/drivers/usb/host/isp1760-if.c @@ -17,19 +17,28 @@ #include "isp1760-hcd.h" -#ifdef CONFIG_PPC_OF +#ifdef CONFIG_OF +#include <linux/slab.h> #include <linux/of.h> #include <linux/of_platform.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> +#include <linux/of_gpio.h> #endif #ifdef CONFIG_PCI #include <linux/pci.h> #endif -#ifdef CONFIG_PPC_OF +#ifdef CONFIG_OF +struct isp1760 { + struct usb_hcd *hcd; + int rst_gpio; +}; + static int of_isp1760_probe(struct platform_device *dev) { - struct usb_hcd *hcd; + struct isp1760 *drvdata; struct device_node *dp = dev->dev.of_node; struct resource *res; struct resource memory; @@ -39,6 +48,11 @@ static int of_isp1760_probe(struct platform_device *dev) int ret; const unsigned int *prop; unsigned int devflags = 0; + enum of_gpio_flags gpio_flags; + + drvdata = kzalloc(sizeof(*drvdata), GFP_KERNEL); + if (!drvdata) + return -ENOMEM; ret = of_address_to_resource(dp, 0, &memory); if (ret) @@ -78,32 +92,57 @@ static int of_isp1760_probe(struct platform_device *dev) if (of_get_property(dp, "dreq-polarity", NULL) != NULL) devflags |= ISP1760_FLAG_DREQ_POL_HIGH; - hcd = isp1760_register(memory.start, res_len, virq, - IRQF_SHARED | IRQF_DISABLED, &dev->dev, dev_name(&dev->dev), - devflags); - if (IS_ERR(hcd)) { - ret = PTR_ERR(hcd); - goto release_reg; + drvdata->rst_gpio = of_get_gpio_flags(dp, 0, &gpio_flags); + if (gpio_is_valid(drvdata->rst_gpio)) { + ret = gpio_request(drvdata->rst_gpio, dev_name(&dev->dev)); + if (!ret) { + if (!(gpio_flags & OF_GPIO_ACTIVE_LOW)) { + devflags |= ISP1760_FLAG_RESET_ACTIVE_HIGH; + gpio_direction_output(drvdata->rst_gpio, 0); + } else { + gpio_direction_output(drvdata->rst_gpio, 1); + } + } else { + drvdata->rst_gpio = ret; + } } - dev_set_drvdata(&dev->dev, hcd); + drvdata->hcd = isp1760_register(memory.start, res_len, virq, + IRQF_SHARED, drvdata->rst_gpio, + &dev->dev, dev_name(&dev->dev), + devflags); + if (IS_ERR(drvdata->hcd)) { + ret = PTR_ERR(drvdata->hcd); + goto free_gpio; + } + + dev_set_drvdata(&dev->dev, drvdata); return ret; +free_gpio: + if (gpio_is_valid(drvdata->rst_gpio)) + gpio_free(drvdata->rst_gpio); release_reg: release_mem_region(memory.start, res_len); + kfree(drvdata); return ret; } static int of_isp1760_remove(struct platform_device *dev) { - struct usb_hcd *hcd = dev_get_drvdata(&dev->dev); + struct isp1760 *drvdata = dev_get_drvdata(&dev->dev); dev_set_drvdata(&dev->dev, NULL); - usb_remove_hcd(hcd); - iounmap(hcd->regs); - release_mem_region(hcd->rsrc_start, hcd->rsrc_len); - usb_put_hcd(hcd); + usb_remove_hcd(drvdata->hcd); + iounmap(drvdata->hcd->regs); + release_mem_region(drvdata->hcd->rsrc_start, drvdata->hcd->rsrc_len); + usb_put_hcd(drvdata->hcd); + + if (gpio_is_valid(drvdata->rst_gpio)) + gpio_free(drvdata->rst_gpio); + + kfree(drvdata); return 0; } @@ -240,7 +279,7 @@ static int __devinit isp1761_pci_probe(struct pci_dev *dev, dev->dev.dma_mask = NULL; hcd = isp1760_register(pci_mem_phy0, memlength, dev->irq, - IRQF_SHARED | IRQF_DISABLED, &dev->dev, dev_name(&dev->dev), + IRQF_SHARED, -ENOENT, &dev->dev, dev_name(&dev->dev), devflags); if (IS_ERR(hcd)) { ret_status = -ENODEV; @@ -313,7 +352,7 @@ static int __devinit isp1760_plat_probe(struct platform_device *pdev) resource_size_t mem_size; struct isp1760_platform_data *priv = pdev->dev.platform_data; unsigned int devflags = 0; - unsigned long irqflags = IRQF_SHARED | IRQF_DISABLED; + unsigned long irqflags = IRQF_SHARED; mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!mem_res) { @@ -351,7 +390,8 @@ static int __devinit isp1760_plat_probe(struct platform_device *pdev) } hcd = isp1760_register(mem_res->start, mem_size, irq_res->start, - irqflags, &pdev->dev, dev_name(&pdev->dev), devflags); + irqflags, -ENOENT, + &pdev->dev, dev_name(&pdev->dev), devflags); if (IS_ERR(hcd)) { pr_warning("isp1760: Failed to register the HCD device\n"); ret = -ENODEV; @@ -396,7 +436,7 @@ static int __init isp1760_init(void) ret = platform_driver_register(&isp1760_plat_driver); if (!ret) any_ret = 0; -#ifdef CONFIG_PPC_OF +#ifdef CONFIG_OF ret = platform_driver_register(&isp1760_of_driver); if (!ret) any_ret = 0; @@ -416,7 +456,7 @@ module_init(isp1760_init); static void __exit isp1760_exit(void) { platform_driver_unregister(&isp1760_plat_driver); -#ifdef CONFIG_PPC_OF +#ifdef CONFIG_OF platform_driver_unregister(&isp1760_of_driver); #endif #ifdef CONFIG_PCI diff --git a/drivers/usb/host/ohci-ath79.c b/drivers/usb/host/ohci-ath79.c index c620c50f6770..18d574d6958b 100644 --- a/drivers/usb/host/ohci-ath79.c +++ b/drivers/usb/host/ohci-ath79.c @@ -111,7 +111,7 @@ static int ohci_ath79_probe(struct platform_device *pdev) ohci_hcd_init(hcd_to_ohci(hcd)); - ret = usb_add_hcd(hcd, irq, IRQF_DISABLED); + ret = usb_add_hcd(hcd, irq, 0); if (ret) goto err_stop_hcd; diff --git a/drivers/usb/host/ohci-au1xxx.c b/drivers/usb/host/ohci-au1xxx.c index 958d985f2951..6b7bc50dfeaa 100644 --- a/drivers/usb/host/ohci-au1xxx.c +++ b/drivers/usb/host/ohci-au1xxx.c @@ -218,7 +218,7 @@ static int ohci_hcd_au1xxx_drv_probe(struct platform_device *pdev) ohci_hcd_init(hcd_to_ohci(hcd)); ret = usb_add_hcd(hcd, pdev->resource[1].start, - IRQF_DISABLED | IRQF_SHARED); + IRQF_SHARED); if (ret == 0) { platform_set_drvdata(pdev, hcd); return ret; diff --git a/drivers/usb/host/ohci-da8xx.c b/drivers/usb/host/ohci-da8xx.c index 6aca2c4453f7..843509778a33 100644 --- a/drivers/usb/host/ohci-da8xx.c +++ b/drivers/usb/host/ohci-da8xx.c @@ -344,7 +344,7 @@ static int usb_hcd_da8xx_probe(const struct hc_driver *driver, error = -ENODEV; goto err4; } - error = usb_add_hcd(hcd, irq, IRQF_DISABLED); + error = usb_add_hcd(hcd, irq, 0); if (error) goto err4; diff --git a/drivers/usb/host/ohci-ep93xx.c b/drivers/usb/host/ohci-ep93xx.c index 4e681613e7ae..dc45d489d00e 100644 --- a/drivers/usb/host/ohci-ep93xx.c +++ b/drivers/usb/host/ohci-ep93xx.c @@ -81,7 +81,7 @@ static int usb_hcd_ep93xx_probe(const struct hc_driver *driver, ohci_hcd_init(hcd_to_ohci(hcd)); - retval = usb_add_hcd(hcd, pdev->resource[1].start, IRQF_DISABLED); + retval = usb_add_hcd(hcd, pdev->resource[1].start, 0); if (retval == 0) return retval; diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c index f9cf3f04b742..34efd479e068 100644 --- a/drivers/usb/host/ohci-hcd.c +++ b/drivers/usb/host/ohci-hcd.c @@ -1114,6 +1114,11 @@ MODULE_LICENSE ("GPL"); #define PLATFORM_DRIVER ohci_hcd_ath79_driver #endif +#ifdef CONFIG_NLM_XLR +#include "ohci-xls.c" +#define PLATFORM_DRIVER ohci_xls_driver +#endif + #if !defined(PCI_DRIVER) && \ !defined(PLATFORM_DRIVER) && \ !defined(OMAP1_PLATFORM_DRIVER) && \ diff --git a/drivers/usb/host/ohci-hub.c b/drivers/usb/host/ohci-hub.c index 9154615292db..2f00040fc408 100644 --- a/drivers/usb/host/ohci-hub.c +++ b/drivers/usb/host/ohci-hub.c @@ -356,10 +356,7 @@ static void ohci_finish_controller_resume(struct usb_hcd *hcd) msleep(20); } - /* Does the root hub have a port wakeup pending? */ - if (ohci_readl(ohci, &ohci->regs->intrstatus) & - (OHCI_INTR_RD | OHCI_INTR_RHSC)) - usb_hcd_resume_root_hub(hcd); + usb_hcd_resume_root_hub(hcd); } /* Carry out polling-, autostop-, and autoresume-related state changes */ diff --git a/drivers/usb/host/ohci-octeon.c b/drivers/usb/host/ohci-octeon.c index d8b45647d1dc..d469bf9b9e54 100644 --- a/drivers/usb/host/ohci-octeon.c +++ b/drivers/usb/host/ohci-octeon.c @@ -164,7 +164,7 @@ static int ohci_octeon_drv_probe(struct platform_device *pdev) ohci_hcd_init(ohci); - ret = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED); + ret = usb_add_hcd(hcd, irq, IRQF_SHARED); if (ret) { dev_dbg(&pdev->dev, "failed to add hcd with err %d\n", ret); goto err3; diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c index 5645f70b9214..e4b8782cc6e2 100644 --- a/drivers/usb/host/ohci-omap.c +++ b/drivers/usb/host/ohci-omap.c @@ -14,7 +14,7 @@ * This file is licenced under the GPL. */ -#include <linux/signal.h> /* IRQF_DISABLED */ +#include <linux/signal.h> #include <linux/jiffies.h> #include <linux/platform_device.h> #include <linux/clk.h> @@ -363,7 +363,7 @@ static int usb_hcd_omap_probe (const struct hc_driver *driver, retval = -ENXIO; goto err3; } - retval = usb_add_hcd(hcd, irq, IRQF_DISABLED); + retval = usb_add_hcd(hcd, irq, 0); if (retval) goto err3; diff --git a/drivers/usb/host/ohci-omap3.c b/drivers/usb/host/ohci-omap3.c index 6048f2f64f73..516ebc4d6cc2 100644 --- a/drivers/usb/host/ohci-omap3.c +++ b/drivers/usb/host/ohci-omap3.c @@ -149,7 +149,7 @@ static int __devinit ohci_hcd_omap3_probe(struct platform_device *pdev) res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ohci"); - if (!ret) { + if (!res) { dev_err(dev, "UHH OHCI get resource failed\n"); return -ENOMEM; } @@ -180,7 +180,7 @@ static int __devinit ohci_hcd_omap3_probe(struct platform_device *pdev) ohci_hcd_init(hcd_to_ohci(hcd)); - ret = usb_add_hcd(hcd, irq, IRQF_DISABLED); + ret = usb_add_hcd(hcd, irq, 0); if (ret) { dev_dbg(dev, "failed to add hcd with err %d\n", ret); goto err_add_hcd; diff --git a/drivers/usb/host/ohci-pnx4008.c b/drivers/usb/host/ohci-pnx4008.c index 653d6a60edb5..0013db7bdf92 100644 --- a/drivers/usb/host/ohci-pnx4008.c +++ b/drivers/usb/host/ohci-pnx4008.c @@ -26,7 +26,7 @@ #include <mach/platform.h> #include <mach/irqs.h> -#include <mach/gpio.h> +#include <asm/gpio.h> #define USB_CTRL IO_ADDRESS(PNX4008_PWRMAN_BASE + 0x64) @@ -398,7 +398,7 @@ static int __devinit usb_hcd_pnx4008_probe(struct platform_device *pdev) ohci_hcd_init(ohci); dev_info(&pdev->dev, "at 0x%p, irq %d\n", hcd->regs, hcd->irq); - ret = usb_add_hcd(hcd, irq, IRQF_DISABLED); + ret = usb_add_hcd(hcd, irq, 0); if (ret == 0) return ret; diff --git a/drivers/usb/host/ohci-pnx8550.c b/drivers/usb/host/ohci-pnx8550.c index 28467e288a93..f13d08f94d6b 100644 --- a/drivers/usb/host/ohci-pnx8550.c +++ b/drivers/usb/host/ohci-pnx8550.c @@ -107,7 +107,7 @@ int usb_hcd_pnx8550_probe (const struct hc_driver *driver, ohci_hcd_init(hcd_to_ohci(hcd)); - retval = usb_add_hcd(hcd, dev->resource[1].start, IRQF_DISABLED); + retval = usb_add_hcd(hcd, dev->resource[1].start, 0); if (retval == 0) return retval; diff --git a/drivers/usb/host/ohci-ppc-of.c b/drivers/usb/host/ohci-ppc-of.c index 0c12f4e14dcd..d24cc89de16f 100644 --- a/drivers/usb/host/ohci-ppc-of.c +++ b/drivers/usb/host/ohci-ppc-of.c @@ -143,7 +143,7 @@ static int __devinit ohci_hcd_ppc_of_probe(struct platform_device *op) ohci_hcd_init(ohci); - rv = usb_add_hcd(hcd, irq, IRQF_DISABLED); + rv = usb_add_hcd(hcd, irq, 0); if (rv == 0) return 0; diff --git a/drivers/usb/host/ohci-ppc-soc.c b/drivers/usb/host/ohci-ppc-soc.c index c0f595c44487..1514b7067470 100644 --- a/drivers/usb/host/ohci-ppc-soc.c +++ b/drivers/usb/host/ohci-ppc-soc.c @@ -80,7 +80,7 @@ static int usb_hcd_ppc_soc_probe(const struct hc_driver *driver, #endif ohci_hcd_init(ohci); - retval = usb_add_hcd(hcd, irq, IRQF_DISABLED); + retval = usb_add_hcd(hcd, irq, 0); if (retval == 0) return retval; diff --git a/drivers/usb/host/ohci-ps3.c b/drivers/usb/host/ohci-ps3.c index 700950455f4d..6fd4fa1f19bb 100644 --- a/drivers/usb/host/ohci-ps3.c +++ b/drivers/usb/host/ohci-ps3.c @@ -164,7 +164,7 @@ static int __devinit ps3_ohci_probe(struct ps3_system_bus_device *dev) ps3_system_bus_set_drvdata(dev, hcd); - result = usb_add_hcd(hcd, virq, IRQF_DISABLED); + result = usb_add_hcd(hcd, virq, 0); if (result) { dev_dbg(&dev->core, "%s:%d: usb_add_hcd failed (%d)\n", diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c index 80be5472783a..29dfefe1c726 100644 --- a/drivers/usb/host/ohci-pxa27x.c +++ b/drivers/usb/host/ohci-pxa27x.c @@ -359,7 +359,7 @@ int usb_hcd_pxa27x_probe (const struct hc_driver *driver, struct platform_device ohci_hcd_init(hcd_to_ohci(hcd)); - retval = usb_add_hcd(hcd, irq, IRQF_DISABLED); + retval = usb_add_hcd(hcd, irq, 0); if (retval == 0) return retval; diff --git a/drivers/usb/host/ohci-q.c b/drivers/usb/host/ohci-q.c index dd24fc115e48..15dc51ded61a 100644 --- a/drivers/usb/host/ohci-q.c +++ b/drivers/usb/host/ohci-q.c @@ -428,7 +428,7 @@ static struct ed *ed_get ( ed->type = usb_pipetype(pipe); info |= (ep->desc.bEndpointAddress & ~USB_DIR_IN) << 7; - info |= le16_to_cpu(ep->desc.wMaxPacketSize) << 16; + info |= usb_endpoint_maxp(&ep->desc) << 16; if (udev->speed == USB_SPEED_LOW) info |= ED_LOWSPEED; /* only control transfers store pids in tds */ @@ -444,7 +444,7 @@ static struct ed *ed_get ( ed->load = usb_calc_bus_time ( udev->speed, !is_out, ed->type == PIPE_ISOCHRONOUS, - le16_to_cpu(ep->desc.wMaxPacketSize)) + usb_endpoint_maxp(&ep->desc)) / 1000; } } diff --git a/drivers/usb/host/ohci-s3c2410.c b/drivers/usb/host/ohci-s3c2410.c index 7c9a4d55526b..a1877c47601e 100644 --- a/drivers/usb/host/ohci-s3c2410.c +++ b/drivers/usb/host/ohci-s3c2410.c @@ -384,7 +384,7 @@ static int usb_hcd_s3c2410_probe(const struct hc_driver *driver, ohci_hcd_init(hcd_to_ohci(hcd)); - retval = usb_add_hcd(hcd, dev->resource[1].start, IRQF_DISABLED); + retval = usb_add_hcd(hcd, dev->resource[1].start, 0); if (retval != 0) goto err_ioremap; diff --git a/drivers/usb/host/ohci-sa1111.c b/drivers/usb/host/ohci-sa1111.c index 4204d9720d23..4bde4f9821ba 100644 --- a/drivers/usb/host/ohci-sa1111.c +++ b/drivers/usb/host/ohci-sa1111.c @@ -143,7 +143,7 @@ int usb_hcd_sa1111_probe (const struct hc_driver *driver, sa1111_start_hc(dev); ohci_hcd_init(hcd_to_ohci(hcd)); - retval = usb_add_hcd(hcd, dev->irq[1], IRQF_DISABLED); + retval = usb_add_hcd(hcd, dev->irq[1], 0); if (retval == 0) return retval; diff --git a/drivers/usb/host/ohci-sh.c b/drivers/usb/host/ohci-sh.c index 14cecb52a9fe..afc4eb6bb9d0 100644 --- a/drivers/usb/host/ohci-sh.c +++ b/drivers/usb/host/ohci-sh.c @@ -109,7 +109,7 @@ static int ohci_hcd_sh_probe(struct platform_device *pdev) hcd->regs = (void __iomem *)res->start; hcd->rsrc_start = res->start; hcd->rsrc_len = resource_size(res); - ret = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED); + ret = usb_add_hcd(hcd, irq, IRQF_SHARED); if (ret != 0) { err("Failed to add hcd"); usb_put_hcd(hcd); diff --git a/drivers/usb/host/ohci-sm501.c b/drivers/usb/host/ohci-sm501.c index 78918ca0da23..968cea2b6d4e 100644 --- a/drivers/usb/host/ohci-sm501.c +++ b/drivers/usb/host/ohci-sm501.c @@ -165,7 +165,7 @@ static int ohci_hcd_sm501_drv_probe(struct platform_device *pdev) ohci_hcd_init(hcd_to_ohci(hcd)); - retval = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED); + retval = usb_add_hcd(hcd, irq, IRQF_SHARED); if (retval) goto err5; diff --git a/drivers/usb/host/ohci-spear.c b/drivers/usb/host/ohci-spear.c index 4fd4bea9ac7a..69874654f3b5 100644 --- a/drivers/usb/host/ohci-spear.c +++ b/drivers/usb/host/ohci-spear.c @@ -152,7 +152,7 @@ static int spear_ohci_hcd_drv_probe(struct platform_device *pdev) spear_start_ohci(ohci_p); ohci_hcd_init(hcd_to_ohci(hcd)); - retval = usb_add_hcd(hcd, platform_get_irq(pdev, 0), IRQF_DISABLED); + retval = usb_add_hcd(hcd, platform_get_irq(pdev, 0), 0); if (retval == 0) return retval; diff --git a/drivers/usb/host/ohci-ssb.c b/drivers/usb/host/ohci-ssb.c index c4aea3b8315e..5ba18595d6f7 100644 --- a/drivers/usb/host/ohci-ssb.c +++ b/drivers/usb/host/ohci-ssb.c @@ -169,7 +169,7 @@ static int ssb_ohci_attach(struct ssb_device *dev) hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len); if (!hcd->regs) goto err_put_hcd; - err = usb_add_hcd(hcd, dev->irq, IRQF_DISABLED | IRQF_SHARED); + err = usb_add_hcd(hcd, dev->irq, IRQF_SHARED); if (err) goto err_iounmap; diff --git a/drivers/usb/host/ohci-tmio.c b/drivers/usb/host/ohci-tmio.c index 57ad1271fc9b..06331d931171 100644 --- a/drivers/usb/host/ohci-tmio.c +++ b/drivers/usb/host/ohci-tmio.c @@ -244,7 +244,7 @@ static int __devinit ohci_hcd_tmio_drv_probe(struct platform_device *dev) ohci = hcd_to_ohci(hcd); ohci_hcd_init(ohci); - ret = usb_add_hcd(hcd, irq, IRQF_DISABLED); + ret = usb_add_hcd(hcd, irq, 0); if (ret) goto err_add_hcd; diff --git a/drivers/usb/host/ohci-xls.c b/drivers/usb/host/ohci-xls.c new file mode 100644 index 000000000000..a3a9c6f45b91 --- /dev/null +++ b/drivers/usb/host/ohci-xls.c @@ -0,0 +1,151 @@ +/* + * OHCI HCD for Netlogic XLS processors. + * + * (C) Copyright 2011 Netlogic Microsystems Inc. + * + * Based on ohci-au1xxx.c, and other Linux OHCI drivers. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive for + * more details. + */ + +#include <linux/platform_device.h> +#include <linux/signal.h> + +static int ohci_xls_probe_internal(const struct hc_driver *driver, + struct platform_device *dev) +{ + struct resource *res; + struct usb_hcd *hcd; + int retval, irq; + + /* Get our IRQ from an earlier registered Platform Resource */ + irq = platform_get_irq(dev, 0); + if (irq < 0) { + dev_err(&dev->dev, "Found HC with no IRQ\n"); + return -ENODEV; + } + + /* Get our Memory Handle */ + res = platform_get_resource(dev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(&dev->dev, "MMIO Handle incorrect!\n"); + return -ENODEV; + } + + hcd = usb_create_hcd(driver, &dev->dev, "XLS"); + if (!hcd) { + retval = -ENOMEM; + goto err1; + } + hcd->rsrc_start = res->start; + hcd->rsrc_len = res->end - res->start + 1; + + if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, + driver->description)) { + dev_dbg(&dev->dev, "Controller already in use\n"); + retval = -EBUSY; + goto err2; + } + + hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len); + if (hcd->regs == NULL) { + dev_dbg(&dev->dev, "error mapping memory\n"); + retval = -EFAULT; + goto err3; + } + + retval = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED); + if (retval != 0) + goto err4; + return retval; + +err4: + iounmap(hcd->regs); +err3: + release_mem_region(hcd->rsrc_start, hcd->rsrc_len); +err2: + usb_put_hcd(hcd); +err1: + dev_err(&dev->dev, "init fail, %d\n", retval); + return retval; +} + +static int ohci_xls_reset(struct usb_hcd *hcd) +{ + struct ohci_hcd *ohci = hcd_to_ohci(hcd); + + ohci_hcd_init(ohci); + return ohci_init(ohci); +} + +static int __devinit ohci_xls_start(struct usb_hcd *hcd) +{ + struct ohci_hcd *ohci; + int ret; + + ohci = hcd_to_ohci(hcd); + ret = ohci_run(ohci); + if (ret < 0) { + err("can't start %s", hcd->self.bus_name); + ohci_stop(hcd); + return ret; + } + return 0; +} + +static struct hc_driver ohci_xls_hc_driver = { + .description = hcd_name, + .product_desc = "XLS OHCI Host Controller", + .hcd_priv_size = sizeof(struct ohci_hcd), + .irq = ohci_irq, + .flags = HCD_MEMORY | HCD_USB11, + .reset = ohci_xls_reset, + .start = ohci_xls_start, + .stop = ohci_stop, + .shutdown = ohci_shutdown, + .urb_enqueue = ohci_urb_enqueue, + .urb_dequeue = ohci_urb_dequeue, + .endpoint_disable = ohci_endpoint_disable, + .get_frame_number = ohci_get_frame, + .hub_status_data = ohci_hub_status_data, + .hub_control = ohci_hub_control, +#ifdef CONFIG_PM + .bus_suspend = ohci_bus_suspend, + .bus_resume = ohci_bus_resume, +#endif + .start_port_reset = ohci_start_port_reset, +}; + +static int ohci_xls_probe(struct platform_device *dev) +{ + int ret; + + pr_debug("In ohci_xls_probe"); + if (usb_disabled()) + return -ENODEV; + ret = ohci_xls_probe_internal(&ohci_xls_hc_driver, dev); + return ret; +} + +static int ohci_xls_remove(struct platform_device *dev) +{ + struct usb_hcd *hcd = platform_get_drvdata(dev); + + usb_remove_hcd(hcd); + iounmap(hcd->regs); + release_mem_region(hcd->rsrc_start, hcd->rsrc_len); + usb_put_hcd(hcd); + return 0; +} + +static struct platform_driver ohci_xls_driver = { + .probe = ohci_xls_probe, + .remove = ohci_xls_remove, + .shutdown = usb_hcd_platform_shutdown, + .driver = { + .name = "ohci-xls-0", + .owner = THIS_MODULE, + }, +}; diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c index 40a0d8b03ad7..e84ca1928dbf 100644 --- a/drivers/usb/host/r8a66597-hcd.c +++ b/drivers/usb/host/r8a66597-hcd.c @@ -959,7 +959,7 @@ static void init_pipe_info(struct r8a66597 *r8a66597, struct urb *urb, info.pipenum = get_empty_pipenum(r8a66597, ep); info.address = get_urb_to_r8a66597_addr(r8a66597, urb); info.epnum = usb_endpoint_num(ep); - info.maxpacket = le16_to_cpu(ep->wMaxPacketSize); + info.maxpacket = usb_endpoint_maxp(ep); info.type = get_r8a66597_type(usb_endpoint_type(ep)); info.bufnum = get_bufnum(info.pipenum); info.buf_bsize = get_buf_bsize(info.pipenum); @@ -2519,7 +2519,7 @@ static int __devinit r8a66597_probe(struct platform_device *pdev) hcd->rsrc_start = res->start; hcd->has_tt = 1; - ret = usb_add_hcd(hcd, irq, IRQF_DISABLED | irq_trigger); + ret = usb_add_hcd(hcd, irq, irq_trigger); if (ret != 0) { dev_err(&pdev->dev, "Failed to add hcd\n"); goto clean_up3; diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c index 1a996245ab98..961d6638d8f9 100644 --- a/drivers/usb/host/sl811-hcd.c +++ b/drivers/usb/host/sl811-hcd.c @@ -1729,7 +1729,7 @@ sl811h_probe(struct platform_device *dev) * Use resource IRQ flags if set by platform device setup. */ irqflags |= IRQF_SHARED; - retval = usb_add_hcd(hcd, irq, IRQF_DISABLED | irqflags); + retval = usb_add_hcd(hcd, irq, irqflags); if (retval != 0) goto err6; diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c index fba99b120588..c8ae199cfbb8 100644 --- a/drivers/usb/host/uhci-hcd.c +++ b/drivers/usb/host/uhci-hcd.c @@ -294,50 +294,50 @@ __acquires(uhci->lock) * and that remote wakeups should be enabled. */ egsm_enable = USBCMD_EGSM; - uhci->RD_enable = 1; int_enable = USBINTR_RESUME; wakeup_enable = 1; - /* In auto-stop mode wakeups must always be detected, but - * Resume-Detect interrupts may be prohibited. (In the absence - * of CONFIG_PM, they are always disallowed.) + /* + * In auto-stop mode, we must be able to detect new connections. + * The user can force us to poll by disabling remote wakeup; + * otherwise we will use the EGSM/RD mechanism. */ if (auto_stop) { if (!device_may_wakeup(&rhdev->dev)) - int_enable = 0; + egsm_enable = int_enable = 0; + } - /* In bus-suspend mode wakeups may be disabled, but if they are - * allowed then so are Resume-Detect interrupts. - */ - } else { #ifdef CONFIG_PM + /* + * In bus-suspend mode, we use the wakeup setting specified + * for the root hub. + */ + else { if (!rhdev->do_remote_wakeup) wakeup_enable = 0; -#endif } +#endif - /* EGSM causes the root hub to echo a 'K' signal (resume) out any - * port which requests a remote wakeup. According to the USB spec, - * every hub is supposed to do this. But if we are ignoring - * remote-wakeup requests anyway then there's no point to it. - * We also shouldn't enable EGSM if it's broken. - */ - if (!wakeup_enable || global_suspend_mode_is_broken(uhci)) - egsm_enable = 0; - - /* If we're ignoring wakeup events then there's no reason to - * enable Resume-Detect interrupts. We also shouldn't enable - * them if they are broken or disallowed. + /* + * UHCI doesn't distinguish between wakeup requests from downstream + * devices and local connect/disconnect events. There's no way to + * enable one without the other; both are controlled by EGSM. Thus + * if wakeups are disallowed then EGSM must be turned off -- in which + * case remote wakeup requests from downstream during system sleep + * will be lost. + * + * In addition, if EGSM is broken then we can't use it. Likewise, + * if Resume-Detect interrupts are broken then we can't use them. * - * This logic may lead us to enabling RD but not EGSM. The UHCI - * spec foolishly says that RD works only when EGSM is on, but - * there's no harm in enabling it anyway -- perhaps some chips - * will implement it! + * Finally, neither EGSM nor RD is useful by itself. Without EGSM, + * the RD status bit will never get set. Without RD, the controller + * won't generate interrupts to tell the system about wakeup events. */ - if (!wakeup_enable || resume_detect_interrupts_are_broken(uhci) || - !int_enable) - uhci->RD_enable = int_enable = 0; + if (!wakeup_enable || global_suspend_mode_is_broken(uhci) || + resume_detect_interrupts_are_broken(uhci)) + egsm_enable = int_enable = 0; + uhci->RD_enable = !!int_enable; uhci_writew(uhci, int_enable, USBINTR); uhci_writew(uhci, egsm_enable | USBCMD_CF, USBCMD); mb(); @@ -364,10 +364,12 @@ __acquires(uhci->lock) uhci->rh_state = new_state; uhci->is_stopped = UHCI_IS_STOPPED; - /* If interrupts don't work and remote wakeup is enabled then - * the suspended root hub needs to be polled. + /* + * If remote wakeup is enabled but either EGSM or RD interrupts + * doesn't work, then we won't get an interrupt when a wakeup event + * occurs. Thus the suspended root hub needs to be polled. */ - if (!int_enable && wakeup_enable) + if (wakeup_enable && (!int_enable || !egsm_enable)) set_bit(HCD_FLAG_POLL_RH, &uhci_to_hcd(uhci)->flags); else clear_bit(HCD_FLAG_POLL_RH, &uhci_to_hcd(uhci)->flags); diff --git a/drivers/usb/host/uhci-q.c b/drivers/usb/host/uhci-q.c index 84ed28b34f93..f6ca80ee4cec 100644 --- a/drivers/usb/host/uhci-q.c +++ b/drivers/usb/host/uhci-q.c @@ -280,7 +280,7 @@ static struct uhci_qh *uhci_alloc_qh(struct uhci_hcd *uhci, qh->load = usb_calc_bus_time(udev->speed, usb_endpoint_dir_in(&hep->desc), qh->type == USB_ENDPOINT_XFER_ISOC, - le16_to_cpu(hep->desc.wMaxPacketSize)) + usb_endpoint_maxp(&hep->desc)) / 1000 + 1; } else { /* Skeleton QH */ @@ -792,7 +792,7 @@ static int uhci_submit_control(struct uhci_hcd *uhci, struct urb *urb, { struct uhci_td *td; unsigned long destination, status; - int maxsze = le16_to_cpu(qh->hep->desc.wMaxPacketSize); + int maxsze = usb_endpoint_maxp(&qh->hep->desc); int len = urb->transfer_buffer_length; dma_addr_t data = urb->transfer_dma; __hc32 *plink; @@ -918,7 +918,7 @@ static int uhci_submit_common(struct uhci_hcd *uhci, struct urb *urb, { struct uhci_td *td; unsigned long destination, status; - int maxsze = le16_to_cpu(qh->hep->desc.wMaxPacketSize); + int maxsze = usb_endpoint_maxp(&qh->hep->desc); int len = urb->transfer_buffer_length; int this_sg_len; dma_addr_t data; diff --git a/drivers/usb/host/xhci-ext-caps.h b/drivers/usb/host/xhci-ext-caps.h index ce5c9e51748e..c7f33123d4c0 100644 --- a/drivers/usb/host/xhci-ext-caps.h +++ b/drivers/usb/host/xhci-ext-caps.h @@ -65,6 +65,12 @@ /* bits 1:2, 5:12, and 17:19 need to be preserved; bits 21:28 should be zero */ #define XHCI_LEGACY_DISABLE_SMI ((0x3 << 1) + (0xff << 5) + (0x7 << 17)) +/* USB 2.0 xHCI 0.96 L1C capability - section 7.2.2.1.3.2 */ +#define XHCI_L1C (1 << 16) + +/* USB 2.0 xHCI 1.0 hardware LMP capability - section 7.2.2.1.3.2 */ +#define XHCI_HLC (1 << 19) + /* command register values to disable interrupts and halt the HC */ /* start/stop HC execution - do not write unless HC is halted*/ #define XHCI_CMD_RUN (1 << 0) diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c index 0be788cc2fdb..431efe72b1f7 100644 --- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c @@ -28,6 +28,25 @@ #define PORT_RWC_BITS (PORT_CSC | PORT_PEC | PORT_WRC | PORT_OCC | \ PORT_RC | PORT_PLC | PORT_PE) +/* usb 1.1 root hub device descriptor */ +static u8 usb_bos_descriptor [] = { + USB_DT_BOS_SIZE, /* __u8 bLength, 5 bytes */ + USB_DT_BOS, /* __u8 bDescriptorType */ + 0x0F, 0x00, /* __le16 wTotalLength, 15 bytes */ + 0x1, /* __u8 bNumDeviceCaps */ + /* First device capability */ + USB_DT_USB_SS_CAP_SIZE, /* __u8 bLength, 10 bytes */ + USB_DT_DEVICE_CAPABILITY, /* Device Capability */ + USB_SS_CAP_TYPE, /* bDevCapabilityType, SUPERSPEED_USB */ + 0x00, /* bmAttributes, LTM off by default */ + USB_5GBPS_OPERATION, 0x00, /* wSpeedsSupported, 5Gbps only */ + 0x03, /* bFunctionalitySupport, + USB 3.0 speed only */ + 0x00, /* bU1DevExitLat, set later. */ + 0x00, 0x00 /* __le16 bU2DevExitLat, set later. */ +}; + + static void xhci_common_hub_descriptor(struct xhci_hcd *xhci, struct usb_hub_descriptor *desc, int ports) { @@ -232,7 +251,7 @@ int xhci_find_slot_id_by_port(struct usb_hcd *hcd, struct xhci_hcd *xhci, continue; speed = xhci->devs[i]->udev->speed; if (((speed == USB_SPEED_SUPER) == (hcd->speed == HCD_USB3)) - && xhci->devs[i]->port == port) { + && xhci->devs[i]->fake_port == port) { slot_id = i; break; } @@ -392,13 +411,39 @@ static int xhci_get_ports(struct usb_hcd *hcd, __le32 __iomem ***port_array) return max_ports; } +void xhci_set_link_state(struct xhci_hcd *xhci, __le32 __iomem **port_array, + int port_id, u32 link_state) +{ + u32 temp; + + temp = xhci_readl(xhci, port_array[port_id]); + temp = xhci_port_state_to_neutral(temp); + temp &= ~PORT_PLS_MASK; + temp |= PORT_LINK_STROBE | link_state; + xhci_writel(xhci, temp, port_array[port_id]); +} + +/* Test and clear port RWC bit */ +void xhci_test_and_clear_bit(struct xhci_hcd *xhci, __le32 __iomem **port_array, + int port_id, u32 port_bit) +{ + u32 temp; + + temp = xhci_readl(xhci, port_array[port_id]); + if (temp & port_bit) { + temp = xhci_port_state_to_neutral(temp); + temp |= port_bit; + xhci_writel(xhci, temp, port_array[port_id]); + } +} + int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, u16 wIndex, char *buf, u16 wLength) { struct xhci_hcd *xhci = hcd_to_xhci(hcd); int max_ports; unsigned long flags; - u32 temp, temp1, status; + u32 temp, status; int retval = 0; __le32 __iomem **port_array; int slot_id; @@ -429,6 +474,21 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, xhci_hub_descriptor(hcd, xhci, (struct usb_hub_descriptor *) buf); break; + case DeviceRequest | USB_REQ_GET_DESCRIPTOR: + if ((wValue & 0xff00) != (USB_DT_BOS << 8)) + goto error; + + if (hcd->speed != HCD_USB3) + goto error; + + memcpy(buf, &usb_bos_descriptor, + USB_DT_BOS_SIZE + USB_DT_USB_SS_CAP_SIZE); + temp = xhci_readl(xhci, &xhci->cap_regs->hcs_params3); + buf[12] = HCS_U1_LATENCY(temp); + put_unaligned_le16(HCS_U2_LATENCY(temp), &buf[13]); + + spin_unlock_irqrestore(&xhci->lock, flags); + return USB_DT_BOS_SIZE + USB_DT_USB_SS_CAP_SIZE; case GetPortStatus: if (!wIndex || wIndex > max_ports) goto error; @@ -463,19 +523,17 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, && (temp & PORT_POWER)) status |= USB_PORT_STAT_SUSPEND; } - if ((temp & PORT_PLS_MASK) == XDEV_RESUME) { + if ((temp & PORT_PLS_MASK) == XDEV_RESUME && + !DEV_SUPERSPEED(temp)) { if ((temp & PORT_RESET) || !(temp & PORT_PE)) goto error; - if (!DEV_SUPERSPEED(temp) && time_after_eq(jiffies, - bus_state->resume_done[wIndex])) { + if (time_after_eq(jiffies, + bus_state->resume_done[wIndex])) { xhci_dbg(xhci, "Resume USB2 port %d\n", wIndex + 1); bus_state->resume_done[wIndex] = 0; - temp1 = xhci_port_state_to_neutral(temp); - temp1 &= ~PORT_PLS_MASK; - temp1 |= PORT_LINK_STROBE | XDEV_U0; - xhci_writel(xhci, temp1, port_array[wIndex]); - + xhci_set_link_state(xhci, port_array, wIndex, + XDEV_U0); xhci_dbg(xhci, "set port %d resume\n", wIndex + 1); slot_id = xhci_find_slot_id_by_port(hcd, xhci, @@ -487,6 +545,14 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, xhci_ring_device(xhci, slot_id); bus_state->port_c_suspend |= 1 << wIndex; bus_state->suspended_ports &= ~(1 << wIndex); + } else { + /* + * The resume has been signaling for less than + * 20ms. Report the port status as SUSPEND, + * let the usbcore check port status again + * and clear resume signaling later. + */ + status |= USB_PORT_STAT_SUSPEND; } } if ((temp & PORT_PLS_MASK) == XDEV_U0 @@ -542,10 +608,19 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, switch (wValue) { case USB_PORT_FEAT_SUSPEND: temp = xhci_readl(xhci, port_array[wIndex]); + if ((temp & PORT_PLS_MASK) != XDEV_U0) { + /* Resume the port to U0 first */ + xhci_set_link_state(xhci, port_array, wIndex, + XDEV_U0); + spin_unlock_irqrestore(&xhci->lock, flags); + msleep(10); + spin_lock_irqsave(&xhci->lock, flags); + } /* In spec software should not attempt to suspend * a port unless the port reports that it is in the * enabled (PED = ‘1’,PLS < ‘3’) state. */ + temp = xhci_readl(xhci, port_array[wIndex]); if ((temp & PORT_PE) == 0 || (temp & PORT_RESET) || (temp & PORT_PLS_MASK) >= XDEV_U3) { xhci_warn(xhci, "USB core suspending device " @@ -564,10 +639,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, xhci_stop_device(xhci, slot_id, 1); spin_lock_irqsave(&xhci->lock, flags); - temp = xhci_port_state_to_neutral(temp); - temp &= ~PORT_PLS_MASK; - temp |= PORT_LINK_STROBE | XDEV_U3; - xhci_writel(xhci, temp, port_array[wIndex]); + xhci_set_link_state(xhci, port_array, wIndex, XDEV_U3); spin_unlock_irqrestore(&xhci->lock, flags); msleep(10); /* wait device to enter */ @@ -601,10 +673,8 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, } } - temp = xhci_port_state_to_neutral(temp); - temp &= ~PORT_PLS_MASK; - temp |= PORT_LINK_STROBE | link_state; - xhci_writel(xhci, temp, port_array[wIndex]); + xhci_set_link_state(xhci, port_array, wIndex, + link_state); spin_unlock_irqrestore(&xhci->lock, flags); msleep(20); /* wait device to enter */ @@ -664,28 +734,17 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, xhci_dbg(xhci, "PORTSC %04x\n", temp); if (temp & PORT_RESET) goto error; - if (temp & XDEV_U3) { + if ((temp & PORT_PLS_MASK) == XDEV_U3) { if ((temp & PORT_PE) == 0) goto error; - temp = xhci_port_state_to_neutral(temp); - temp &= ~PORT_PLS_MASK; - temp |= PORT_LINK_STROBE | XDEV_RESUME; - xhci_writel(xhci, temp, - port_array[wIndex]); - - spin_unlock_irqrestore(&xhci->lock, - flags); + xhci_set_link_state(xhci, port_array, wIndex, + XDEV_RESUME); + spin_unlock_irqrestore(&xhci->lock, flags); msleep(20); spin_lock_irqsave(&xhci->lock, flags); - - temp = xhci_readl(xhci, - port_array[wIndex]); - temp = xhci_port_state_to_neutral(temp); - temp &= ~PORT_PLS_MASK; - temp |= PORT_LINK_STROBE | XDEV_U0; - xhci_writel(xhci, temp, - port_array[wIndex]); + xhci_set_link_state(xhci, port_array, wIndex, + XDEV_U0); } bus_state->port_c_suspend |= 1 << wIndex; @@ -752,7 +811,7 @@ int xhci_hub_status_data(struct usb_hcd *hcd, char *buf) memset(buf, 0, retval); status = 0; - mask = PORT_CSC | PORT_PEC | PORT_OCC | PORT_PLC; + mask = PORT_CSC | PORT_PEC | PORT_OCC | PORT_PLC | PORT_WRC; spin_lock_irqsave(&xhci->lock, flags); /* For each port, did anything change? If so, set that bit in buf. */ @@ -901,25 +960,18 @@ int xhci_bus_resume(struct usb_hcd *hcd) if (test_bit(port_index, &bus_state->bus_suspended) && (temp & PORT_PLS_MASK)) { if (DEV_SUPERSPEED(temp)) { - temp = xhci_port_state_to_neutral(temp); - temp &= ~PORT_PLS_MASK; - temp |= PORT_LINK_STROBE | XDEV_U0; - xhci_writel(xhci, temp, port_array[port_index]); + xhci_set_link_state(xhci, port_array, + port_index, XDEV_U0); } else { - temp = xhci_port_state_to_neutral(temp); - temp &= ~PORT_PLS_MASK; - temp |= PORT_LINK_STROBE | XDEV_RESUME; - xhci_writel(xhci, temp, port_array[port_index]); + xhci_set_link_state(xhci, port_array, + port_index, XDEV_RESUME); spin_unlock_irqrestore(&xhci->lock, flags); msleep(20); spin_lock_irqsave(&xhci->lock, flags); - temp = xhci_readl(xhci, port_array[port_index]); - temp = xhci_port_state_to_neutral(temp); - temp &= ~PORT_PLS_MASK; - temp |= PORT_LINK_STROBE | XDEV_U0; - xhci_writel(xhci, temp, port_array[port_index]); + xhci_set_link_state(xhci, port_array, + port_index, XDEV_U0); } /* wait for the port to enter U0 and report port link * state change. @@ -929,12 +981,8 @@ int xhci_bus_resume(struct usb_hcd *hcd) spin_lock_irqsave(&xhci->lock, flags); /* Clear PLC */ - temp = xhci_readl(xhci, port_array[port_index]); - if (temp & PORT_PLC) { - temp = xhci_port_state_to_neutral(temp); - temp |= PORT_PLC; - xhci_writel(xhci, temp, port_array[port_index]); - } + xhci_test_and_clear_bit(xhci, port_array, port_index, + PORT_PLC); slot_id = xhci_find_slot_id_by_port(hcd, xhci, port_index + 1); diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index d446886b22b0..42a22b8e6922 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -61,8 +61,6 @@ static struct xhci_segment *xhci_segment_alloc(struct xhci_hcd *xhci, gfp_t flag static void xhci_segment_free(struct xhci_hcd *xhci, struct xhci_segment *seg) { - if (!seg) - return; if (seg->trbs) { xhci_dbg(xhci, "Freeing DMA segment at %p (virtual) 0x%llx (DMA)\n", seg->trbs, (unsigned long long)seg->dma); @@ -81,7 +79,7 @@ static void xhci_segment_free(struct xhci_hcd *xhci, struct xhci_segment *seg) * related flags, such as End TRB, Toggle Cycle, and no snoop. */ static void xhci_link_segments(struct xhci_hcd *xhci, struct xhci_segment *prev, - struct xhci_segment *next, bool link_trbs) + struct xhci_segment *next, bool link_trbs, bool isoc) { u32 val; @@ -97,7 +95,9 @@ static void xhci_link_segments(struct xhci_hcd *xhci, struct xhci_segment *prev, val &= ~TRB_TYPE_BITMASK; val |= TRB_TYPE(TRB_LINK); /* Always set the chain bit with 0.95 hardware */ - if (xhci_link_trb_quirk(xhci)) + /* Set chain bit for isoc rings on AMD 0.96 host */ + if (xhci_link_trb_quirk(xhci) || + (isoc && (xhci->quirks & XHCI_AMD_0x96_HOST))) val |= TRB_CHAIN; prev->trbs[TRBS_PER_SEGMENT-1].link.control = cpu_to_le32(val); } @@ -112,18 +112,20 @@ void xhci_ring_free(struct xhci_hcd *xhci, struct xhci_ring *ring) struct xhci_segment *seg; struct xhci_segment *first_seg; - if (!ring || !ring->first_seg) + if (!ring) return; - first_seg = ring->first_seg; - seg = first_seg->next; - xhci_dbg(xhci, "Freeing ring at %p\n", ring); - while (seg != first_seg) { - struct xhci_segment *next = seg->next; - xhci_segment_free(xhci, seg); - seg = next; + if (ring->first_seg) { + first_seg = ring->first_seg; + seg = first_seg->next; + xhci_dbg(xhci, "Freeing ring at %p\n", ring); + while (seg != first_seg) { + struct xhci_segment *next = seg->next; + xhci_segment_free(xhci, seg); + seg = next; + } + xhci_segment_free(xhci, first_seg); + ring->first_seg = NULL; } - xhci_segment_free(xhci, first_seg); - ring->first_seg = NULL; kfree(ring); } @@ -152,7 +154,7 @@ static void xhci_initialize_ring_info(struct xhci_ring *ring) * See section 4.9.1 and figures 15 and 16. */ static struct xhci_ring *xhci_ring_alloc(struct xhci_hcd *xhci, - unsigned int num_segs, bool link_trbs, gfp_t flags) + unsigned int num_segs, bool link_trbs, bool isoc, gfp_t flags) { struct xhci_ring *ring; struct xhci_segment *prev; @@ -178,12 +180,12 @@ static struct xhci_ring *xhci_ring_alloc(struct xhci_hcd *xhci, next = xhci_segment_alloc(xhci, flags); if (!next) goto fail; - xhci_link_segments(xhci, prev, next, link_trbs); + xhci_link_segments(xhci, prev, next, link_trbs, isoc); prev = next; num_segs--; } - xhci_link_segments(xhci, prev, ring->first_seg, link_trbs); + xhci_link_segments(xhci, prev, ring->first_seg, link_trbs, isoc); if (link_trbs) { /* See section 4.9.2.1 and 6.4.4.1 */ @@ -229,14 +231,14 @@ void xhci_free_or_cache_endpoint_ring(struct xhci_hcd *xhci, * pointers to the beginning of the ring. */ static void xhci_reinit_cached_ring(struct xhci_hcd *xhci, - struct xhci_ring *ring) + struct xhci_ring *ring, bool isoc) { struct xhci_segment *seg = ring->first_seg; do { memset(seg->trbs, 0, sizeof(union xhci_trb)*TRBS_PER_SEGMENT); /* All endpoint rings have link TRBs */ - xhci_link_segments(xhci, seg, seg->next, 1); + xhci_link_segments(xhci, seg, seg->next, 1, isoc); seg = seg->next; } while (seg != ring->first_seg); xhci_initialize_ring_info(ring); @@ -315,7 +317,7 @@ static void xhci_free_stream_ctx(struct xhci_hcd *xhci, struct pci_dev *pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller); if (num_stream_ctxs > MEDIUM_STREAM_ARRAY_SIZE) - pci_free_consistent(pdev, + dma_free_coherent(&pdev->dev, sizeof(struct xhci_stream_ctx)*num_stream_ctxs, stream_ctx, dma); else if (num_stream_ctxs <= SMALL_STREAM_ARRAY_SIZE) @@ -343,9 +345,9 @@ static struct xhci_stream_ctx *xhci_alloc_stream_ctx(struct xhci_hcd *xhci, struct pci_dev *pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller); if (num_stream_ctxs > MEDIUM_STREAM_ARRAY_SIZE) - return pci_alloc_consistent(pdev, + return dma_alloc_coherent(&pdev->dev, sizeof(struct xhci_stream_ctx)*num_stream_ctxs, - dma); + dma, mem_flags); else if (num_stream_ctxs <= SMALL_STREAM_ARRAY_SIZE) return dma_pool_alloc(xhci->small_streams_pool, mem_flags, dma); @@ -540,7 +542,7 @@ struct xhci_stream_info *xhci_alloc_stream_info(struct xhci_hcd *xhci, */ for (cur_stream = 1; cur_stream < num_streams; cur_stream++) { stream_info->stream_rings[cur_stream] = - xhci_ring_alloc(xhci, 1, true, mem_flags); + xhci_ring_alloc(xhci, 1, true, false, mem_flags); cur_ring = stream_info->stream_rings[cur_stream]; if (!cur_ring) goto cleanup_rings; @@ -687,11 +689,103 @@ static void xhci_init_endpoint_timer(struct xhci_hcd *xhci, ep->xhci = xhci; } -/* All the xhci_tds in the ring's TD list should be freed at this point */ +static void xhci_free_tt_info(struct xhci_hcd *xhci, + struct xhci_virt_device *virt_dev, + int slot_id) +{ + struct list_head *tt; + struct list_head *tt_list_head; + struct list_head *tt_next; + struct xhci_tt_bw_info *tt_info; + + /* If the device never made it past the Set Address stage, + * it may not have the real_port set correctly. + */ + if (virt_dev->real_port == 0 || + virt_dev->real_port > HCS_MAX_PORTS(xhci->hcs_params1)) { + xhci_dbg(xhci, "Bad real port.\n"); + return; + } + + tt_list_head = &(xhci->rh_bw[virt_dev->real_port - 1].tts); + if (list_empty(tt_list_head)) + return; + + list_for_each(tt, tt_list_head) { + tt_info = list_entry(tt, struct xhci_tt_bw_info, tt_list); + if (tt_info->slot_id == slot_id) + break; + } + /* Cautionary measure in case the hub was disconnected before we + * stored the TT information. + */ + if (tt_info->slot_id != slot_id) + return; + + tt_next = tt->next; + tt_info = list_entry(tt, struct xhci_tt_bw_info, + tt_list); + /* Multi-TT hubs will have more than one entry */ + do { + list_del(tt); + kfree(tt_info); + tt = tt_next; + if (list_empty(tt_list_head)) + break; + tt_next = tt->next; + tt_info = list_entry(tt, struct xhci_tt_bw_info, + tt_list); + } while (tt_info->slot_id == slot_id); +} + +int xhci_alloc_tt_info(struct xhci_hcd *xhci, + struct xhci_virt_device *virt_dev, + struct usb_device *hdev, + struct usb_tt *tt, gfp_t mem_flags) +{ + struct xhci_tt_bw_info *tt_info; + unsigned int num_ports; + int i, j; + + if (!tt->multi) + num_ports = 1; + else + num_ports = hdev->maxchild; + + for (i = 0; i < num_ports; i++, tt_info++) { + struct xhci_interval_bw_table *bw_table; + + tt_info = kzalloc(sizeof(*tt_info), mem_flags); + if (!tt_info) + goto free_tts; + INIT_LIST_HEAD(&tt_info->tt_list); + list_add(&tt_info->tt_list, + &xhci->rh_bw[virt_dev->real_port - 1].tts); + tt_info->slot_id = virt_dev->udev->slot_id; + if (tt->multi) + tt_info->ttport = i+1; + bw_table = &tt_info->bw_table; + for (j = 0; j < XHCI_MAX_INTERVAL; j++) + INIT_LIST_HEAD(&bw_table->interval_bw[j].endpoints); + } + return 0; + +free_tts: + xhci_free_tt_info(xhci, virt_dev, virt_dev->udev->slot_id); + return -ENOMEM; +} + + +/* All the xhci_tds in the ring's TD list should be freed at this point. + * Should be called with xhci->lock held if there is any chance the TT lists + * will be manipulated by the configure endpoint, allocate device, or update + * hub functions while this function is removing the TT entries from the list. + */ void xhci_free_virt_device(struct xhci_hcd *xhci, int slot_id) { struct xhci_virt_device *dev; int i; + int old_active_eps = 0; /* Slot ID 0 is reserved */ if (slot_id == 0 || !xhci->devs[slot_id]) @@ -702,13 +796,29 @@ void xhci_free_virt_device(struct xhci_hcd *xhci, int slot_id) if (!dev) return; + if (dev->tt_info) + old_active_eps = dev->tt_info->active_eps; + for (i = 0; i < 31; ++i) { if (dev->eps[i].ring) xhci_ring_free(xhci, dev->eps[i].ring); if (dev->eps[i].stream_info) xhci_free_stream_info(xhci, dev->eps[i].stream_info); + /* Endpoints on the TT/root port lists should have been removed + * when usb_disable_device() was called for the device. + * We can't drop them anyway, because the udev might have gone + * away by this point, and we can't tell what speed it was. + */ + if (!list_empty(&dev->eps[i].bw_endpoint_list)) + xhci_warn(xhci, "Slot %u endpoint %u " + "not removed from BW list!\n", + slot_id, i); } + /* If this is a hub, free the TT(s) from the TT list */ + xhci_free_tt_info(xhci, dev, slot_id); + /* If necessary, update the number of active TTs on this root port */ + xhci_update_tt_active_eps(xhci, dev, old_active_eps); if (dev->ring_cache) { for (i = 0; i < dev->num_rings_cached; i++) @@ -762,10 +872,11 @@ int xhci_alloc_virt_device(struct xhci_hcd *xhci, int slot_id, for (i = 0; i < 31; i++) { xhci_init_endpoint_timer(xhci, &dev->eps[i]); INIT_LIST_HEAD(&dev->eps[i].cancelled_td_list); + INIT_LIST_HEAD(&dev->eps[i].bw_endpoint_list); } /* Allocate endpoint 0 ring */ - dev->eps[0].ring = xhci_ring_alloc(xhci, 1, true, flags); + dev->eps[0].ring = xhci_ring_alloc(xhci, 1, true, false, flags); if (!dev->eps[0].ring) goto fail; @@ -921,9 +1032,40 @@ int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *ud for (top_dev = udev; top_dev->parent && top_dev->parent->parent; top_dev = top_dev->parent) /* Found device below root hub */; - dev->port = top_dev->portnum; + dev->fake_port = top_dev->portnum; + dev->real_port = port_num; xhci_dbg(xhci, "Set root hub portnum to %d\n", port_num); - xhci_dbg(xhci, "Set fake root hub portnum to %d\n", dev->port); + xhci_dbg(xhci, "Set fake root hub portnum to %d\n", dev->fake_port); + + /* Find the right bandwidth table that this device will be a part of. + * If this is a full speed device attached directly to a root port (or a + * decendent of one), it counts as a primary bandwidth domain, not a + * secondary bandwidth domain under a TT. An xhci_tt_info structure + * will never be created for the HS root hub. + */ + if (!udev->tt || !udev->tt->hub->parent) { + dev->bw_table = &xhci->rh_bw[port_num - 1].bw_table; + } else { + struct xhci_root_port_bw_info *rh_bw; + struct xhci_tt_bw_info *tt_bw; + + rh_bw = &xhci->rh_bw[port_num - 1]; + /* Find the right TT. */ + list_for_each_entry(tt_bw, &rh_bw->tts, tt_list) { + if (tt_bw->slot_id != udev->tt->hub->slot_id) + continue; + + if (!dev->udev->tt->multi || + (udev->tt->multi && + tt_bw->ttport == dev->udev->ttport)) { + dev->bw_table = &tt_bw->bw_table; + dev->tt_info = tt_bw; + break; + } + } + if (!dev->tt_info) + xhci_warn(xhci, "WARN: Didn't find a matching TT\n"); + } /* Is this a LS/FS device under an external HS hub? */ if (udev->tt && udev->tt->hub->parent) { @@ -1141,8 +1283,8 @@ static u32 xhci_get_max_esit_payload(struct xhci_hcd *xhci, if (udev->speed == USB_SPEED_SUPER) return le16_to_cpu(ep->ss_ep_comp.wBytesPerInterval); - max_packet = GET_MAX_PACKET(le16_to_cpu(ep->desc.wMaxPacketSize)); - max_burst = (le16_to_cpu(ep->desc.wMaxPacketSize) & 0x1800) >> 11; + max_packet = GET_MAX_PACKET(usb_endpoint_maxp(&ep->desc)); + max_burst = (usb_endpoint_maxp(&ep->desc) & 0x1800) >> 11; /* A 0 in max burst means 1 transfer per ESIT */ return max_packet * (max_burst + 1); } @@ -1175,10 +1317,10 @@ int xhci_endpoint_init(struct xhci_hcd *xhci, */ if (usb_endpoint_xfer_isoc(&ep->desc)) virt_dev->eps[ep_index].new_ring = - xhci_ring_alloc(xhci, 8, true, mem_flags); + xhci_ring_alloc(xhci, 8, true, true, mem_flags); else virt_dev->eps[ep_index].new_ring = - xhci_ring_alloc(xhci, 1, true, mem_flags); + xhci_ring_alloc(xhci, 1, true, false, mem_flags); if (!virt_dev->eps[ep_index].new_ring) { /* Attempt to use the ring cache */ if (virt_dev->num_rings_cached == 0) @@ -1187,7 +1329,8 @@ int xhci_endpoint_init(struct xhci_hcd *xhci, virt_dev->ring_cache[virt_dev->num_rings_cached]; virt_dev->ring_cache[virt_dev->num_rings_cached] = NULL; virt_dev->num_rings_cached--; - xhci_reinit_cached_ring(xhci, virt_dev->eps[ep_index].new_ring); + xhci_reinit_cached_ring(xhci, virt_dev->eps[ep_index].new_ring, + usb_endpoint_xfer_isoc(&ep->desc) ? true : false); } virt_dev->eps[ep_index].skip = false; ep_ring = virt_dev->eps[ep_index].new_ring; @@ -1211,7 +1354,7 @@ int xhci_endpoint_init(struct xhci_hcd *xhci, /* Set the max packet size and max burst */ switch (udev->speed) { case USB_SPEED_SUPER: - max_packet = le16_to_cpu(ep->desc.wMaxPacketSize); + max_packet = usb_endpoint_maxp(&ep->desc); ep_ctx->ep_info2 |= cpu_to_le32(MAX_PACKET(max_packet)); /* dig out max burst from ep companion desc */ max_packet = ep->ss_ep_comp.bMaxBurst; @@ -1223,14 +1366,14 @@ int xhci_endpoint_init(struct xhci_hcd *xhci, */ if (usb_endpoint_xfer_isoc(&ep->desc) || usb_endpoint_xfer_int(&ep->desc)) { - max_burst = (le16_to_cpu(ep->desc.wMaxPacketSize) + max_burst = (usb_endpoint_maxp(&ep->desc) & 0x1800) >> 11; ep_ctx->ep_info2 |= cpu_to_le32(MAX_BURST(max_burst)); } /* Fall through */ case USB_SPEED_FULL: case USB_SPEED_LOW: - max_packet = GET_MAX_PACKET(le16_to_cpu(ep->desc.wMaxPacketSize)); + max_packet = GET_MAX_PACKET(usb_endpoint_maxp(&ep->desc)); ep_ctx->ep_info2 |= cpu_to_le32(MAX_PACKET(max_packet)); break; default: @@ -1286,6 +1429,70 @@ void xhci_endpoint_zero(struct xhci_hcd *xhci, */ } +void xhci_clear_endpoint_bw_info(struct xhci_bw_info *bw_info) +{ + bw_info->ep_interval = 0; + bw_info->mult = 0; + bw_info->num_packets = 0; + bw_info->max_packet_size = 0; + bw_info->type = 0; + bw_info->max_esit_payload = 0; +} + +void xhci_update_bw_info(struct xhci_hcd *xhci, + struct xhci_container_ctx *in_ctx, + struct xhci_input_control_ctx *ctrl_ctx, + struct xhci_virt_device *virt_dev) +{ + struct xhci_bw_info *bw_info; + struct xhci_ep_ctx *ep_ctx; + unsigned int ep_type; + int i; + + for (i = 1; i < 31; ++i) { + bw_info = &virt_dev->eps[i].bw_info; + + /* We can't tell what endpoint type is being dropped, but + * unconditionally clearing the bandwidth info for non-periodic + * endpoints should be harmless because the info will never be + * set in the first place. + */ + if (!EP_IS_ADDED(ctrl_ctx, i) && EP_IS_DROPPED(ctrl_ctx, i)) { + /* Dropped endpoint */ + xhci_clear_endpoint_bw_info(bw_info); + continue; + } + + if (EP_IS_ADDED(ctrl_ctx, i)) { + ep_ctx = xhci_get_ep_ctx(xhci, in_ctx, i); + ep_type = CTX_TO_EP_TYPE(le32_to_cpu(ep_ctx->ep_info2)); + + /* Ignore non-periodic endpoints */ + if (ep_type != ISOC_OUT_EP && ep_type != INT_OUT_EP && + ep_type != ISOC_IN_EP && + ep_type != INT_IN_EP) + continue; + + /* Added or changed endpoint */ + bw_info->ep_interval = CTX_TO_EP_INTERVAL( + le32_to_cpu(ep_ctx->ep_info)); + /* Number of packets and mult are zero-based in the + * input context, but we want one-based for the + * interval table. + */ + bw_info->mult = CTX_TO_EP_MULT( + le32_to_cpu(ep_ctx->ep_info)) + 1; + bw_info->num_packets = CTX_TO_MAX_BURST( + le32_to_cpu(ep_ctx->ep_info2)) + 1; + bw_info->max_packet_size = MAX_PACKET_DECODED( + le32_to_cpu(ep_ctx->ep_info2)); + bw_info->type = ep_type; + bw_info->max_esit_payload = CTX_TO_MAX_ESIT_PAYLOAD( + le32_to_cpu(ep_ctx->tx_info)); + } + } +} + /* Copy output xhci_ep_ctx to the input xhci_ep_ctx copy. * Useful when you want to change one particular aspect of the endpoint and then * issue a configure endpoint command. @@ -1344,10 +1551,9 @@ static int scratchpad_alloc(struct xhci_hcd *xhci, gfp_t flags) if (!xhci->scratchpad) goto fail_sp; - xhci->scratchpad->sp_array = - pci_alloc_consistent(to_pci_dev(dev), + xhci->scratchpad->sp_array = dma_alloc_coherent(dev, num_sp * sizeof(u64), - &xhci->scratchpad->sp_dma); + &xhci->scratchpad->sp_dma, flags); if (!xhci->scratchpad->sp_array) goto fail_sp2; @@ -1364,8 +1570,8 @@ static int scratchpad_alloc(struct xhci_hcd *xhci, gfp_t flags) xhci->dcbaa->dev_context_ptrs[0] = cpu_to_le64(xhci->scratchpad->sp_dma); for (i = 0; i < num_sp; i++) { dma_addr_t dma; - void *buf = pci_alloc_consistent(to_pci_dev(dev), - xhci->page_size, &dma); + void *buf = dma_alloc_coherent(dev, xhci->page_size, &dma, + flags); if (!buf) goto fail_sp5; @@ -1378,7 +1584,7 @@ static int scratchpad_alloc(struct xhci_hcd *xhci, gfp_t flags) fail_sp5: for (i = i - 1; i >= 0; i--) { - pci_free_consistent(to_pci_dev(dev), xhci->page_size, + dma_free_coherent(dev, xhci->page_size, xhci->scratchpad->sp_buffers[i], xhci->scratchpad->sp_dma_buffers[i]); } @@ -1388,7 +1594,7 @@ static int scratchpad_alloc(struct xhci_hcd *xhci, gfp_t flags) kfree(xhci->scratchpad->sp_buffers); fail_sp3: - pci_free_consistent(to_pci_dev(dev), num_sp * sizeof(u64), + dma_free_coherent(dev, num_sp * sizeof(u64), xhci->scratchpad->sp_array, xhci->scratchpad->sp_dma); @@ -1412,13 +1618,13 @@ static void scratchpad_free(struct xhci_hcd *xhci) num_sp = HCS_MAX_SCRATCHPAD(xhci->hcs_params2); for (i = 0; i < num_sp; i++) { - pci_free_consistent(pdev, xhci->page_size, + dma_free_coherent(&pdev->dev, xhci->page_size, xhci->scratchpad->sp_buffers[i], xhci->scratchpad->sp_dma_buffers[i]); } kfree(xhci->scratchpad->sp_dma_buffers); kfree(xhci->scratchpad->sp_buffers); - pci_free_consistent(pdev, num_sp * sizeof(u64), + dma_free_coherent(&pdev->dev, num_sp * sizeof(u64), xhci->scratchpad->sp_array, xhci->scratchpad->sp_dma); kfree(xhci->scratchpad); @@ -1463,18 +1669,10 @@ struct xhci_command *xhci_alloc_command(struct xhci_hcd *xhci, void xhci_urb_free_priv(struct xhci_hcd *xhci, struct urb_priv *urb_priv) { - int last; - - if (!urb_priv) - return; - - last = urb_priv->length - 1; - if (last >= 0) { - int i; - for (i = 0; i <= last; i++) - kfree(urb_priv->td[i]); + if (urb_priv) { + kfree(urb_priv->td[0]); + kfree(urb_priv); } - kfree(urb_priv); } void xhci_free_command(struct xhci_hcd *xhci, @@ -1489,6 +1687,8 @@ void xhci_free_command(struct xhci_hcd *xhci, void xhci_mem_cleanup(struct xhci_hcd *xhci) { struct pci_dev *pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller); + struct dev_info *dev_info, *next; + unsigned long flags; int size; int i; @@ -1500,7 +1700,7 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci) } size = sizeof(struct xhci_erst_entry)*(xhci->erst.num_entries); if (xhci->erst.entries) - pci_free_consistent(pdev, size, + dma_free_coherent(&pdev->dev, size, xhci->erst.entries, xhci->erst.erst_dma_addr); xhci->erst.entries = NULL; xhci_dbg(xhci, "Freed ERST\n"); @@ -1540,17 +1740,25 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci) xhci_write_64(xhci, 0, &xhci->op_regs->dcbaa_ptr); if (xhci->dcbaa) - pci_free_consistent(pdev, sizeof(*xhci->dcbaa), + dma_free_coherent(&pdev->dev, sizeof(*xhci->dcbaa), xhci->dcbaa, xhci->dcbaa->dma); xhci->dcbaa = NULL; scratchpad_free(xhci); + spin_lock_irqsave(&xhci->lock, flags); + list_for_each_entry_safe(dev_info, next, &xhci->lpm_failed_devs, list) { + list_del(&dev_info->list); + kfree(dev_info); + } + spin_unlock_irqrestore(&xhci->lock, flags); + xhci->num_usb2_ports = 0; xhci->num_usb3_ports = 0; kfree(xhci->usb2_ports); kfree(xhci->usb3_ports); kfree(xhci->port_array); + kfree(xhci->rh_bw); xhci->page_size = 0; xhci->page_shift = 0; @@ -1762,6 +1970,23 @@ static void xhci_add_in_port(struct xhci_hcd *xhci, unsigned int num_ports, if (port_offset == 0 || (port_offset + port_count - 1) > num_ports) /* WTF? "Valid values are ‘1’ to MaxPorts" */ return; + + /* Check the host's USB2 LPM capability */ + if ((xhci->hci_version == 0x96) && (major_revision != 0x03) && + (temp & XHCI_L1C)) { + xhci_dbg(xhci, "xHCI 0.96: support USB2 software lpm\n"); + xhci->sw_lpm_support = 1; + } + + if ((xhci->hci_version >= 0x100) && (major_revision != 0x03)) { + xhci_dbg(xhci, "xHCI 1.0: support USB2 software lpm\n"); + xhci->sw_lpm_support = 1; + if (temp & XHCI_HLC) { + xhci_dbg(xhci, "xHCI 1.0: support USB2 hardware lpm\n"); + xhci->hw_lpm_support = 1; + } + } + port_offset--; for (i = port_offset; i < (port_offset + port_count); i++) { /* Duplicate entry. Ignore the port if the revisions differ. */ @@ -1806,7 +2031,7 @@ static int xhci_setup_port_arrays(struct xhci_hcd *xhci, gfp_t flags) __le32 __iomem *addr; u32 offset; unsigned int num_ports; - int i, port_index; + int i, j, port_index; addr = &xhci->cap_regs->hcc_params; offset = XHCI_HCC_EXT_CAPS(xhci_readl(xhci, addr)); @@ -1821,6 +2046,18 @@ static int xhci_setup_port_arrays(struct xhci_hcd *xhci, gfp_t flags) if (!xhci->port_array) return -ENOMEM; + xhci->rh_bw = kzalloc(sizeof(*xhci->rh_bw)*num_ports, flags); + if (!xhci->rh_bw) + return -ENOMEM; + for (i = 0; i < num_ports; i++) { + struct xhci_interval_bw_table *bw_table; + + INIT_LIST_HEAD(&xhci->rh_bw[i].tts); + bw_table = &xhci->rh_bw[i].bw_table; + for (j = 0; j < XHCI_MAX_INTERVAL; j++) + INIT_LIST_HEAD(&bw_table->interval_bw[j].endpoints); + } + /* * For whatever reason, the first capability offset is from the * capability register base, not from the HCCPARAMS register. @@ -1959,8 +2196,8 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags) * Section 5.4.8 - doorbell array must be * "physically contiguous and 64-byte (cache line) aligned". */ - xhci->dcbaa = pci_alloc_consistent(to_pci_dev(dev), - sizeof(*xhci->dcbaa), &dma); + xhci->dcbaa = dma_alloc_coherent(dev, sizeof(*xhci->dcbaa), &dma, + GFP_KERNEL); if (!xhci->dcbaa) goto fail; memset(xhci->dcbaa, 0, sizeof *(xhci->dcbaa)); @@ -1994,14 +2231,14 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags) dma_pool_create("xHCI 1KB stream ctx arrays", dev, MEDIUM_STREAM_ARRAY_SIZE, 16, 0); /* Any stream context array bigger than MEDIUM_STREAM_ARRAY_SIZE - * will be allocated with pci_alloc_consistent() + * will be allocated with dma_alloc_coherent() */ if (!xhci->small_streams_pool || !xhci->medium_streams_pool) goto fail; /* Set up the command ring to have one segments for now. */ - xhci->cmd_ring = xhci_ring_alloc(xhci, 1, true, flags); + xhci->cmd_ring = xhci_ring_alloc(xhci, 1, true, false, flags); if (!xhci->cmd_ring) goto fail; xhci_dbg(xhci, "Allocated command ring at %p\n", xhci->cmd_ring); @@ -2032,14 +2269,16 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags) * the event ring segment table (ERST). Section 4.9.3. */ xhci_dbg(xhci, "// Allocating event ring\n"); - xhci->event_ring = xhci_ring_alloc(xhci, ERST_NUM_SEGS, false, flags); + xhci->event_ring = xhci_ring_alloc(xhci, ERST_NUM_SEGS, false, false, + flags); if (!xhci->event_ring) goto fail; if (xhci_check_trb_in_td_math(xhci, flags) < 0) goto fail; - xhci->erst.entries = pci_alloc_consistent(to_pci_dev(dev), - sizeof(struct xhci_erst_entry)*ERST_NUM_SEGS, &dma); + xhci->erst.entries = dma_alloc_coherent(dev, + sizeof(struct xhci_erst_entry) * ERST_NUM_SEGS, &dma, + GFP_KERNEL); if (!xhci->erst.entries) goto fail; xhci_dbg(xhci, "// Allocated event ring segment table at 0x%llx\n", @@ -2102,6 +2341,8 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags) if (xhci_setup_port_arrays(xhci, flags)) goto fail; + INIT_LIST_HEAD(&xhci->lpm_failed_devs); + return 0; fail: diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index cb16de213f64..9f51f88cc0f5 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -51,61 +51,9 @@ static int xhci_pci_reinit(struct xhci_hcd *xhci, struct pci_dev *pdev) return 0; } -/* called during probe() after chip reset completes */ -static int xhci_pci_setup(struct usb_hcd *hcd) +static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) { - struct xhci_hcd *xhci; - struct pci_dev *pdev = to_pci_dev(hcd->self.controller); - int retval; - u32 temp; - - hcd->self.sg_tablesize = TRBS_PER_SEGMENT - 2; - - if (usb_hcd_is_primary_hcd(hcd)) { - xhci = kzalloc(sizeof(struct xhci_hcd), GFP_KERNEL); - if (!xhci) - return -ENOMEM; - *((struct xhci_hcd **) hcd->hcd_priv) = xhci; - xhci->main_hcd = hcd; - /* Mark the first roothub as being USB 2.0. - * The xHCI driver will register the USB 3.0 roothub. - */ - hcd->speed = HCD_USB2; - hcd->self.root_hub->speed = USB_SPEED_HIGH; - /* - * USB 2.0 roothub under xHCI has an integrated TT, - * (rate matching hub) as opposed to having an OHCI/UHCI - * companion controller. - */ - hcd->has_tt = 1; - } else { - /* xHCI private pointer was set in xhci_pci_probe for the second - * registered roothub. - */ - xhci = hcd_to_xhci(hcd); - temp = xhci_readl(xhci, &xhci->cap_regs->hcc_params); - if (HCC_64BIT_ADDR(temp)) { - xhci_dbg(xhci, "Enabling 64-bit DMA addresses.\n"); - dma_set_mask(hcd->self.controller, DMA_BIT_MASK(64)); - } else { - dma_set_mask(hcd->self.controller, DMA_BIT_MASK(32)); - } - return 0; - } - - xhci->cap_regs = hcd->regs; - xhci->op_regs = hcd->regs + - HC_LENGTH(xhci_readl(xhci, &xhci->cap_regs->hc_capbase)); - xhci->run_regs = hcd->regs + - (xhci_readl(xhci, &xhci->cap_regs->run_regs_off) & RTSOFF_MASK); - /* Cache read-only capability registers */ - xhci->hcs_params1 = xhci_readl(xhci, &xhci->cap_regs->hcs_params1); - xhci->hcs_params2 = xhci_readl(xhci, &xhci->cap_regs->hcs_params2); - xhci->hcs_params3 = xhci_readl(xhci, &xhci->cap_regs->hcs_params3); - xhci->hcc_params = xhci_readl(xhci, &xhci->cap_regs->hc_capbase); - xhci->hci_version = HC_VERSION(xhci->hcc_params); - xhci->hcc_params = xhci_readl(xhci, &xhci->cap_regs->hcc_params); - xhci_print_registers(xhci); + struct pci_dev *pdev = to_pci_dev(dev); /* Look for vendor-specific quirks */ if (pdev->vendor == PCI_VENDOR_ID_FRESCO_LOGIC && @@ -128,6 +76,9 @@ static int xhci_pci_setup(struct usb_hcd *hcd) if (pdev->vendor == PCI_VENDOR_ID_NEC) xhci->quirks |= XHCI_NEC_HOST; + if (pdev->vendor == PCI_VENDOR_ID_AMD && xhci->hci_version == 0x96) + xhci->quirks |= XHCI_AMD_0x96_HOST; + /* AMD PLL quirk */ if (pdev->vendor == PCI_VENDOR_ID_AMD && usb_amd_find_chipset_info()) xhci->quirks |= XHCI_AMD_PLL_FIX; @@ -136,39 +87,29 @@ static int xhci_pci_setup(struct usb_hcd *hcd) xhci->quirks |= XHCI_SPURIOUS_SUCCESS; xhci->quirks |= XHCI_EP_LIMIT_QUIRK; xhci->limit_active_eps = 64; + xhci->quirks |= XHCI_SW_BW_CHECKING; } if (pdev->vendor == PCI_VENDOR_ID_ETRON && pdev->device == PCI_DEVICE_ID_ASROCK_P67) { xhci->quirks |= XHCI_RESET_ON_RESUME; xhci_dbg(xhci, "QUIRK: Resetting on resume\n"); } +} - /* Make sure the HC is halted. */ - retval = xhci_halt(xhci); - if (retval) - goto error; +/* called during probe() after chip reset completes */ +static int xhci_pci_setup(struct usb_hcd *hcd) +{ + struct xhci_hcd *xhci; + struct pci_dev *pdev = to_pci_dev(hcd->self.controller); + int retval; - xhci_dbg(xhci, "Resetting HCD\n"); - /* Reset the internal HC memory state and registers. */ - retval = xhci_reset(xhci); + retval = xhci_gen_setup(hcd, xhci_pci_quirks); if (retval) - goto error; - xhci_dbg(xhci, "Reset complete\n"); - - temp = xhci_readl(xhci, &xhci->cap_regs->hcc_params); - if (HCC_64BIT_ADDR(temp)) { - xhci_dbg(xhci, "Enabling 64-bit DMA addresses.\n"); - dma_set_mask(hcd->self.controller, DMA_BIT_MASK(64)); - } else { - dma_set_mask(hcd->self.controller, DMA_BIT_MASK(32)); - } + return retval; - xhci_dbg(xhci, "Calling HCD init\n"); - /* Initialize HCD and host controller data structures. */ - retval = xhci_init(hcd); - if (retval) - goto error; - xhci_dbg(xhci, "Called HCD init\n"); + xhci = hcd_to_xhci(hcd); + if (!usb_hcd_is_primary_hcd(hcd)) + return 0; pci_read_config_byte(pdev, XHCI_SBRN_OFFSET, &xhci->sbrn); xhci_dbg(xhci, "Got SBRN %u\n", (unsigned int) xhci->sbrn); @@ -178,7 +119,6 @@ static int xhci_pci_setup(struct usb_hcd *hcd) if (!retval) return retval; -error: kfree(xhci); return retval; } @@ -222,7 +162,7 @@ static int xhci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) *((struct xhci_hcd **) xhci->shared_hcd->hcd_priv) = xhci; retval = usb_add_hcd(xhci->shared_hcd, dev->irq, - IRQF_DISABLED | IRQF_SHARED); + IRQF_SHARED); if (retval) goto put_usb3_hcd; /* Roothub already marked as USB 3.0 speed */ @@ -344,6 +284,11 @@ static const struct hc_driver xhci_pci_hc_driver = { .hub_status_data = xhci_hub_status_data, .bus_suspend = xhci_bus_suspend, .bus_resume = xhci_bus_resume, + /* + * call back when device connected and addressed + */ + .update_device = xhci_update_device, + .set_usb2_hw_lpm = xhci_set_usb2_hardware_lpm, }; /*-------------------------------------------------------------------------*/ @@ -375,12 +320,12 @@ static struct pci_driver xhci_pci_driver = { #endif }; -int xhci_register_pci(void) +int __init xhci_register_pci(void) { return pci_register_driver(&xhci_pci_driver); } -void xhci_unregister_pci(void) +void __exit xhci_unregister_pci(void) { pci_unregister_driver(&xhci_pci_driver); } diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 7113d16e2d3a..940321b3ec68 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -185,7 +185,7 @@ static void inc_deq(struct xhci_hcd *xhci, struct xhci_ring *ring, bool consumer * prepare_transfer()? */ static void inc_enq(struct xhci_hcd *xhci, struct xhci_ring *ring, - bool consumer, bool more_trbs_coming) + bool consumer, bool more_trbs_coming, bool isoc) { u32 chain; union xhci_trb *next; @@ -212,11 +212,13 @@ static void inc_enq(struct xhci_hcd *xhci, struct xhci_ring *ring, if (!chain && !more_trbs_coming) break; - /* If we're not dealing with 0.95 hardware, + /* If we're not dealing with 0.95 hardware or + * isoc rings on AMD 0.96 host, * carry over the chain bit of the previous TRB * (which may mean the chain bit is cleared). */ - if (!xhci_link_trb_quirk(xhci)) { + if (!(isoc && (xhci->quirks & XHCI_AMD_0x96_HOST)) + && !xhci_link_trb_quirk(xhci)) { next->link.control &= cpu_to_le32(~TRB_CHAIN); next->link.control |= @@ -514,8 +516,12 @@ void xhci_find_new_dequeue_state(struct xhci_hcd *xhci, (unsigned long long) addr); } +/* flip_cycle means flip the cycle bit of all but the first and last TRB. + * (The last TRB actually points to the ring enqueue pointer, which is not part + * of this TD.) This is used to remove partially enqueued isoc TDs from a ring. + */ static void td_to_noop(struct xhci_hcd *xhci, struct xhci_ring *ep_ring, - struct xhci_td *cur_td) + struct xhci_td *cur_td, bool flip_cycle) { struct xhci_segment *cur_seg; union xhci_trb *cur_trb; @@ -528,6 +534,12 @@ static void td_to_noop(struct xhci_hcd *xhci, struct xhci_ring *ep_ring, * leave the pointers intact. */ cur_trb->generic.field[3] &= cpu_to_le32(~TRB_CHAIN); + /* Flip the cycle bit (link TRBs can't be the first + * or last TRB). + */ + if (flip_cycle) + cur_trb->generic.field[3] ^= + cpu_to_le32(TRB_CYCLE); xhci_dbg(xhci, "Cancel (unchain) link TRB\n"); xhci_dbg(xhci, "Address = %p (0x%llx dma); " "in seg %p (0x%llx dma)\n", @@ -541,6 +553,11 @@ static void td_to_noop(struct xhci_hcd *xhci, struct xhci_ring *ep_ring, cur_trb->generic.field[2] = 0; /* Preserve only the cycle bit of this TRB */ cur_trb->generic.field[3] &= cpu_to_le32(TRB_CYCLE); + /* Flip the cycle bit except on the first or last TRB */ + if (flip_cycle && cur_trb != cur_td->first_trb && + cur_trb != cur_td->last_trb) + cur_trb->generic.field[3] ^= + cpu_to_le32(TRB_CYCLE); cur_trb->generic.field[3] |= cpu_to_le32( TRB_TYPE(TRB_TR_NOOP)); xhci_dbg(xhci, "Cancel TRB %p (0x%llx dma) " @@ -719,14 +736,14 @@ static void handle_stopped_endpoint(struct xhci_hcd *xhci, cur_td->urb->stream_id, cur_td, &deq_state); else - td_to_noop(xhci, ep_ring, cur_td); + td_to_noop(xhci, ep_ring, cur_td, false); remove_finished_td: /* * The event handler won't see a completion for this TD anymore, * so remove it from the endpoint ring's TD list. Keep it in * the cancelled TD list for URB completion later. */ - list_del(&cur_td->td_list); + list_del_init(&cur_td->td_list); } last_unlinked_td = cur_td; xhci_stop_watchdog_timer_in_irq(xhci, ep); @@ -754,7 +771,7 @@ remove_finished_td: do { cur_td = list_entry(ep->cancelled_td_list.next, struct xhci_td, cancelled_td_list); - list_del(&cur_td->cancelled_td_list); + list_del_init(&cur_td->cancelled_td_list); /* Clean up the cancelled URB */ /* Doesn't matter what we pass for status, since the core will @@ -862,9 +879,9 @@ void xhci_stop_endpoint_command_watchdog(unsigned long arg) cur_td = list_first_entry(&ring->td_list, struct xhci_td, td_list); - list_del(&cur_td->td_list); + list_del_init(&cur_td->td_list); if (!list_empty(&cur_td->cancelled_td_list)) - list_del(&cur_td->cancelled_td_list); + list_del_init(&cur_td->cancelled_td_list); xhci_giveback_urb_in_irq(xhci, cur_td, -ESHUTDOWN, "killed"); } @@ -873,7 +890,7 @@ void xhci_stop_endpoint_command_watchdog(unsigned long arg) &temp_ep->cancelled_td_list, struct xhci_td, cancelled_td_list); - list_del(&cur_td->cancelled_td_list); + list_del_init(&cur_td->cancelled_td_list); xhci_giveback_urb_in_irq(xhci, cur_td, -ESHUTDOWN, "killed"); } @@ -1314,10 +1331,8 @@ static void handle_port_status(struct xhci_hcd *xhci, if (DEV_SUPERSPEED(temp)) { xhci_dbg(xhci, "resume SS port %d\n", port_id); - temp = xhci_port_state_to_neutral(temp); - temp &= ~PORT_PLS_MASK; - temp |= PORT_LINK_STROBE | XDEV_U0; - xhci_writel(xhci, temp, port_array[faked_port_index]); + xhci_set_link_state(xhci, port_array, faked_port_index, + XDEV_U0); slot_id = xhci_find_slot_id_by_port(hcd, xhci, faked_port_index); if (!slot_id) { @@ -1327,10 +1342,8 @@ static void handle_port_status(struct xhci_hcd *xhci, xhci_ring_device(xhci, slot_id); xhci_dbg(xhci, "resume SS port %d finished\n", port_id); /* Clear PORT_PLC */ - temp = xhci_readl(xhci, port_array[faked_port_index]); - temp = xhci_port_state_to_neutral(temp); - temp |= PORT_PLC; - xhci_writel(xhci, temp, port_array[faked_port_index]); + xhci_test_and_clear_bit(xhci, port_array, + faked_port_index, PORT_PLC); } else { xhci_dbg(xhci, "resume HS port %d\n", port_id); bus_state->resume_done[faked_port_index] = jiffies + @@ -1341,6 +1354,10 @@ static void handle_port_status(struct xhci_hcd *xhci, } } + if (hcd->speed != HCD_USB3) + xhci_test_and_clear_bit(xhci, port_array, faked_port_index, + PORT_PLC); + cleanup: /* Update event ring dequeue pointer before dropping the lock */ inc_deq(xhci, xhci->event_ring, true); @@ -1565,10 +1582,10 @@ td_cleanup: else *status = 0; } - list_del(&td->td_list); + list_del_init(&td->td_list); /* Was this TD slated to be cancelled but completed anyway? */ if (!list_empty(&td->cancelled_td_list)) - list_del(&td->cancelled_td_list); + list_del_init(&td->cancelled_td_list); urb_priv->td_cnt++; /* Giveback the urb when all the tds are completed */ @@ -1919,8 +1936,10 @@ static int handle_tx_event(struct xhci_hcd *xhci, int status = -EINPROGRESS; struct urb_priv *urb_priv; struct xhci_ep_ctx *ep_ctx; + struct list_head *tmp; u32 trb_comp_code; int ret = 0; + int td_num = 0; slot_id = TRB_TO_SLOT_ID(le32_to_cpu(event->flags)); xdev = xhci->devs[slot_id]; @@ -1942,6 +1961,12 @@ static int handle_tx_event(struct xhci_hcd *xhci, return -ENODEV; } + /* Count current td numbers if ep->skip is set */ + if (ep->skip) { + list_for_each(tmp, &ep_ring->td_list) + td_num++; + } + event_dma = le64_to_cpu(event->buffer); trb_comp_code = GET_COMP_CODE(le32_to_cpu(event->transfer_len)); /* Look for common error cases */ @@ -2053,7 +2078,18 @@ static int handle_tx_event(struct xhci_hcd *xhci, goto cleanup; } + /* We've skipped all the TDs on the ep ring when ep->skip set */ + if (ep->skip && td_num == 0) { + ep->skip = false; + xhci_dbg(xhci, "All tds on the ep_ring skipped. " + "Clear skip flag.\n"); + ret = 0; + goto cleanup; + } + td = list_entry(ep_ring->td_list.next, struct xhci_td, td_list); + if (ep->skip) + td_num--; /* Is this a TRB in the currently executing TD? */ event_seg = trb_in_td(ep_ring->deq_seg, ep_ring->dequeue, @@ -2158,7 +2194,8 @@ cleanup: if ((urb->actual_length != urb->transfer_buffer_length && (urb->transfer_flags & URB_SHORT_NOT_OK)) || - status != 0) + (status != 0 && + !usb_endpoint_xfer_isoc(&urb->ep->desc))) xhci_dbg(xhci, "Giveback URB %p, len = %d, " "expected = %x, status = %d\n", urb, urb->actual_length, @@ -2375,7 +2412,7 @@ irqreturn_t xhci_msi_irq(int irq, struct usb_hcd *hcd) * prepare_transfer()? */ static void queue_trb(struct xhci_hcd *xhci, struct xhci_ring *ring, - bool consumer, bool more_trbs_coming, + bool consumer, bool more_trbs_coming, bool isoc, u32 field1, u32 field2, u32 field3, u32 field4) { struct xhci_generic_trb *trb; @@ -2385,7 +2422,7 @@ static void queue_trb(struct xhci_hcd *xhci, struct xhci_ring *ring, trb->field[1] = cpu_to_le32(field2); trb->field[2] = cpu_to_le32(field3); trb->field[3] = cpu_to_le32(field4); - inc_enq(xhci, ring, consumer, more_trbs_coming); + inc_enq(xhci, ring, consumer, more_trbs_coming, isoc); } /* @@ -2393,7 +2430,7 @@ static void queue_trb(struct xhci_hcd *xhci, struct xhci_ring *ring, * FIXME allocate segments if the ring is full. */ static int prepare_ring(struct xhci_hcd *xhci, struct xhci_ring *ep_ring, - u32 ep_state, unsigned int num_trbs, gfp_t mem_flags) + u32 ep_state, unsigned int num_trbs, bool isoc, gfp_t mem_flags) { /* Make sure the endpoint has been added to xHC schedule */ switch (ep_state) { @@ -2435,10 +2472,11 @@ static int prepare_ring(struct xhci_hcd *xhci, struct xhci_ring *ep_ring, next = ring->enqueue; while (last_trb(xhci, ring, ring->enq_seg, next)) { - /* If we're not dealing with 0.95 hardware, - * clear the chain bit. + /* If we're not dealing with 0.95 hardware or isoc rings + * on AMD 0.96 host, clear the chain bit. */ - if (!xhci_link_trb_quirk(xhci)) + if (!xhci_link_trb_quirk(xhci) && !(isoc && + (xhci->quirks & XHCI_AMD_0x96_HOST))) next->link.control &= cpu_to_le32(~TRB_CHAIN); else next->link.control |= cpu_to_le32(TRB_CHAIN); @@ -2471,6 +2509,7 @@ static int prepare_transfer(struct xhci_hcd *xhci, unsigned int num_trbs, struct urb *urb, unsigned int td_index, + bool isoc, gfp_t mem_flags) { int ret; @@ -2488,7 +2527,7 @@ static int prepare_transfer(struct xhci_hcd *xhci, ret = prepare_ring(xhci, ep_ring, le32_to_cpu(ep_ctx->ep_info) & EP_STATE_MASK, - num_trbs, mem_flags); + num_trbs, isoc, mem_flags); if (ret) return ret; @@ -2500,11 +2539,8 @@ static int prepare_transfer(struct xhci_hcd *xhci, if (td_index == 0) { ret = usb_hcd_link_urb_to_ep(bus_to_hcd(urb->dev->bus), urb); - if (unlikely(ret)) { - xhci_urb_free_priv(xhci, urb_priv); - urb->hcpriv = NULL; + if (unlikely(ret)) return ret; - } } td->urb = urb; @@ -2672,11 +2708,15 @@ static u32 xhci_v1_0_td_remainder(int running_total, int trb_buff_len, { int packets_transferred; + /* One TRB with a zero-length data packet. */ + if (running_total == 0 && trb_buff_len == 0) + return 0; + /* All the TRB queueing functions don't count the current TRB in * running_total. */ packets_transferred = (running_total + trb_buff_len) / - le16_to_cpu(urb->ep->desc.wMaxPacketSize); + usb_endpoint_maxp(&urb->ep->desc); return xhci_td_remainder(total_packet_count - packets_transferred); } @@ -2706,11 +2746,11 @@ static int queue_bulk_sg_tx(struct xhci_hcd *xhci, gfp_t mem_flags, num_trbs = count_sg_trbs_needed(xhci, urb); num_sgs = urb->num_sgs; total_packet_count = roundup(urb->transfer_buffer_length, - le16_to_cpu(urb->ep->desc.wMaxPacketSize)); + usb_endpoint_maxp(&urb->ep->desc)); trb_buff_len = prepare_transfer(xhci, xhci->devs[slot_id], ep_index, urb->stream_id, - num_trbs, urb, 0, mem_flags); + num_trbs, urb, 0, false, mem_flags); if (trb_buff_len < 0) return trb_buff_len; @@ -2805,7 +2845,7 @@ static int queue_bulk_sg_tx(struct xhci_hcd *xhci, gfp_t mem_flags, more_trbs_coming = true; else more_trbs_coming = false; - queue_trb(xhci, ep_ring, false, more_trbs_coming, + queue_trb(xhci, ep_ring, false, more_trbs_coming, false, lower_32_bits(addr), upper_32_bits(addr), length_field, @@ -2896,7 +2936,7 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags, ret = prepare_transfer(xhci, xhci->devs[slot_id], ep_index, urb->stream_id, - num_trbs, urb, 0, mem_flags); + num_trbs, urb, 0, false, mem_flags); if (ret < 0) return ret; @@ -2913,7 +2953,7 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags, running_total = 0; total_packet_count = roundup(urb->transfer_buffer_length, - le16_to_cpu(urb->ep->desc.wMaxPacketSize)); + usb_endpoint_maxp(&urb->ep->desc)); /* How much data is in the first TRB? */ addr = (u64) urb->transfer_dma; trb_buff_len = TRB_MAX_BUFF_SIZE - @@ -2968,7 +3008,7 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags, more_trbs_coming = true; else more_trbs_coming = false; - queue_trb(xhci, ep_ring, false, more_trbs_coming, + queue_trb(xhci, ep_ring, false, more_trbs_coming, false, lower_32_bits(addr), upper_32_bits(addr), length_field, @@ -3028,7 +3068,7 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags, num_trbs++; ret = prepare_transfer(xhci, xhci->devs[slot_id], ep_index, urb->stream_id, - num_trbs, urb, 0, mem_flags); + num_trbs, urb, 0, false, mem_flags); if (ret < 0) return ret; @@ -3061,7 +3101,7 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags, } } - queue_trb(xhci, ep_ring, false, true, + queue_trb(xhci, ep_ring, false, true, false, setup->bRequestType | setup->bRequest << 8 | le16_to_cpu(setup->wValue) << 16, le16_to_cpu(setup->wIndex) | le16_to_cpu(setup->wLength) << 16, TRB_LEN(8) | TRB_INTR_TARGET(0), @@ -3081,7 +3121,7 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags, if (urb->transfer_buffer_length > 0) { if (setup->bRequestType & USB_DIR_IN) field |= TRB_DIR_IN; - queue_trb(xhci, ep_ring, false, true, + queue_trb(xhci, ep_ring, false, true, false, lower_32_bits(urb->transfer_dma), upper_32_bits(urb->transfer_dma), length_field, @@ -3097,7 +3137,7 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags, field = 0; else field = TRB_DIR_IN; - queue_trb(xhci, ep_ring, false, false, + queue_trb(xhci, ep_ring, false, false, false, 0, 0, TRB_INTR_TARGET(0), @@ -3113,21 +3153,16 @@ static int count_isoc_trbs_needed(struct xhci_hcd *xhci, struct urb *urb, int i) { int num_trbs = 0; - u64 addr, td_len, running_total; + u64 addr, td_len; addr = (u64) (urb->transfer_dma + urb->iso_frame_desc[i].offset); td_len = urb->iso_frame_desc[i].length; - running_total = TRB_MAX_BUFF_SIZE - (addr & (TRB_MAX_BUFF_SIZE - 1)); - running_total &= TRB_MAX_BUFF_SIZE - 1; - if (running_total != 0) + num_trbs = DIV_ROUND_UP(td_len + (addr & (TRB_MAX_BUFF_SIZE - 1)), + TRB_MAX_BUFF_SIZE); + if (num_trbs == 0) num_trbs++; - while (running_total < td_len) { - num_trbs++; - running_total += TRB_MAX_BUFF_SIZE; - } - return num_trbs; } @@ -3226,6 +3261,7 @@ static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags, start_trb = &ep_ring->enqueue->generic; start_cycle = ep_ring->cycle_state; + urb_priv = urb->hcpriv; /* Queue the first TRB, even if it's zero-length */ for (i = 0; i < num_tds; i++) { unsigned int total_packet_count; @@ -3237,9 +3273,11 @@ static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags, addr = start_addr + urb->iso_frame_desc[i].offset; td_len = urb->iso_frame_desc[i].length; td_remain_len = td_len; - /* FIXME: Ignoring zero-length packets, can those happen? */ total_packet_count = roundup(td_len, - le16_to_cpu(urb->ep->desc.wMaxPacketSize)); + usb_endpoint_maxp(&urb->ep->desc)); + /* A zero-length transfer still involves at least one packet. */ + if (total_packet_count == 0) + total_packet_count++; burst_count = xhci_get_burst_count(xhci, urb->dev, urb, total_packet_count); residue = xhci_get_last_burst_packet_count(xhci, @@ -3248,13 +3286,15 @@ static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags, trbs_per_td = count_isoc_trbs_needed(xhci, urb, i); ret = prepare_transfer(xhci, xhci->devs[slot_id], ep_index, - urb->stream_id, trbs_per_td, urb, i, mem_flags); - if (ret < 0) - return ret; + urb->stream_id, trbs_per_td, urb, i, true, + mem_flags); + if (ret < 0) { + if (i == 0) + return ret; + goto cleanup; + } - urb_priv = urb->hcpriv; td = urb_priv->td[i]; - for (j = 0; j < trbs_per_td; j++) { u32 remainder = 0; field = TRB_TBC(burst_count) | TRB_TLBPC(residue); @@ -3317,7 +3357,7 @@ static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags, remainder | TRB_INTR_TARGET(0); - queue_trb(xhci, ep_ring, false, more_trbs_coming, + queue_trb(xhci, ep_ring, false, more_trbs_coming, true, lower_32_bits(addr), upper_32_bits(addr), length_field, @@ -3344,6 +3384,27 @@ static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags, giveback_first_trb(xhci, slot_id, ep_index, urb->stream_id, start_cycle, start_trb); return 0; +cleanup: + /* Clean up a partially enqueued isoc transfer. */ + + for (i--; i >= 0; i--) + list_del_init(&urb_priv->td[i]->td_list); + + /* Use the first TD as a temporary variable to turn the TDs we've queued + * into No-ops with a software-owned cycle bit. That way the hardware + * won't accidentally start executing bogus TDs when we partially + * overwrite them. td->first_trb and td->start_seg are already set. + */ + urb_priv->td[0]->last_trb = ep_ring->enqueue; + /* Every TRB except the first & last will have its cycle bit flipped. */ + td_to_noop(xhci, ep_ring, urb_priv->td[0], true); + + /* Reset the ring enqueue back to the first TRB and its cycle bit. */ + ep_ring->enqueue = urb_priv->td[0]->first_trb; + ep_ring->enq_seg = urb_priv->td[0]->start_seg; + ep_ring->cycle_state = start_cycle; + usb_hcd_unlink_urb_from_ep(bus_to_hcd(urb->dev->bus), urb); + return ret; } /* @@ -3378,7 +3439,7 @@ int xhci_queue_isoc_tx_prepare(struct xhci_hcd *xhci, gfp_t mem_flags, * Do not insert any td of the urb to the ring if the check failed. */ ret = prepare_ring(xhci, ep_ring, le32_to_cpu(ep_ctx->ep_info) & EP_STATE_MASK, - num_trbs, mem_flags); + num_trbs, true, mem_flags); if (ret) return ret; @@ -3437,7 +3498,7 @@ static int queue_command(struct xhci_hcd *xhci, u32 field1, u32 field2, reserved_trbs++; ret = prepare_ring(xhci, xhci->cmd_ring, EP_STATE_RUNNING, - reserved_trbs, GFP_ATOMIC); + reserved_trbs, false, GFP_ATOMIC); if (ret < 0) { xhci_err(xhci, "ERR: No room for command on command ring\n"); if (command_must_succeed) @@ -3445,8 +3506,8 @@ static int queue_command(struct xhci_hcd *xhci, u32 field1, u32 field2, "unfailable commands failed.\n"); return ret; } - queue_trb(xhci, xhci->cmd_ring, false, false, field1, field2, field3, - field4 | xhci->cmd_ring->cycle_state); + queue_trb(xhci, xhci->cmd_ring, false, false, false, field1, field2, + field3, field4 | xhci->cmd_ring->cycle_state); return 0; } diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 1c4432d8fc10..1ff95a0df576 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -175,28 +175,19 @@ int xhci_reset(struct xhci_hcd *xhci) return handshake(xhci, &xhci->op_regs->status, STS_CNR, 0, 250 * 1000); } -/* - * Free IRQs - * free all IRQs request - */ -static void xhci_free_irq(struct xhci_hcd *xhci) +#ifdef CONFIG_PCI +static int xhci_free_msi(struct xhci_hcd *xhci) { int i; - struct pci_dev *pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller); - /* return if using legacy interrupt */ - if (xhci_to_hcd(xhci)->irq >= 0) - return; - - if (xhci->msix_entries) { - for (i = 0; i < xhci->msix_count; i++) - if (xhci->msix_entries[i].vector) - free_irq(xhci->msix_entries[i].vector, - xhci_to_hcd(xhci)); - } else if (pdev->irq >= 0) - free_irq(pdev->irq, xhci_to_hcd(xhci)); + if (!xhci->msix_entries) + return -EINVAL; - return; + for (i = 0; i < xhci->msix_count; i++) + if (xhci->msix_entries[i].vector) + free_irq(xhci->msix_entries[i].vector, + xhci_to_hcd(xhci)); + return 0; } /* @@ -224,6 +215,28 @@ static int xhci_setup_msi(struct xhci_hcd *xhci) } /* + * Free IRQs + * free all IRQs request + */ +static void xhci_free_irq(struct xhci_hcd *xhci) +{ + struct pci_dev *pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller); + int ret; + + /* return if using legacy interrupt */ + if (xhci_to_hcd(xhci)->irq >= 0) + return; + + ret = xhci_free_msi(xhci); + if (!ret) + return; + if (pdev->irq >= 0) + free_irq(pdev->irq, xhci_to_hcd(xhci)); + + return; +} + +/* * Set up MSI-X */ static int xhci_setup_msix(struct xhci_hcd *xhci) @@ -302,6 +315,72 @@ static void xhci_cleanup_msix(struct xhci_hcd *xhci) return; } +static void xhci_msix_sync_irqs(struct xhci_hcd *xhci) +{ + int i; + + if (xhci->msix_entries) { + for (i = 0; i < xhci->msix_count; i++) + synchronize_irq(xhci->msix_entries[i].vector); + } +} + +static int xhci_try_enable_msi(struct usb_hcd *hcd) +{ + struct xhci_hcd *xhci = hcd_to_xhci(hcd); + struct pci_dev *pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller); + int ret; + + /* + * Some Fresco Logic host controllers advertise MSI, but fail to + * generate interrupts. Don't even try to enable MSI. + */ + if (xhci->quirks & XHCI_BROKEN_MSI) + return 0; + + /* unregister the legacy interrupt */ + if (hcd->irq) + free_irq(hcd->irq, hcd); + hcd->irq = -1; + + ret = xhci_setup_msix(xhci); + if (ret) + /* fall back to msi*/ + ret = xhci_setup_msi(xhci); + + if (!ret) + /* hcd->irq is -1, we have MSI */ + return 0; + + /* fall back to legacy interrupt*/ + ret = request_irq(pdev->irq, &usb_hcd_irq, IRQF_SHARED, + hcd->irq_descr, hcd); + if (ret) { + xhci_err(xhci, "request interrupt %d failed\n", + pdev->irq); + return ret; + } + hcd->irq = pdev->irq; + return 0; +} + +#else + +static int xhci_try_enable_msi(struct usb_hcd *hcd) +{ + return 0; +} + +static void xhci_cleanup_msix(struct xhci_hcd *xhci) +{ +} + +static void xhci_msix_sync_irqs(struct xhci_hcd *xhci) +{ +} + +#endif + /* * Initialize memory for HCD and xHC (one-time init). * @@ -316,7 +395,7 @@ int xhci_init(struct usb_hcd *hcd) xhci_dbg(xhci, "xhci_init\n"); spin_lock_init(&xhci->lock); - if (link_quirk) { + if (xhci->hci_version == 0x95 && link_quirk) { xhci_dbg(xhci, "QUIRK: Not clearing Link TRB chain bits.\n"); xhci->quirks |= XHCI_LINK_TRB_QUIRK; } else { @@ -413,9 +492,8 @@ int xhci_run(struct usb_hcd *hcd) { u32 temp; u64 temp_64; - u32 ret; + int ret; struct xhci_hcd *xhci = hcd_to_xhci(hcd); - struct pci_dev *pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller); /* Start the xHCI host controller running only after the USB 2.0 roothub * is setup. @@ -426,34 +504,10 @@ int xhci_run(struct usb_hcd *hcd) return xhci_run_finished(xhci); xhci_dbg(xhci, "xhci_run\n"); - /* unregister the legacy interrupt */ - if (hcd->irq) - free_irq(hcd->irq, hcd); - hcd->irq = -1; - /* Some Fresco Logic host controllers advertise MSI, but fail to - * generate interrupts. Don't even try to enable MSI. - */ - if (xhci->quirks & XHCI_BROKEN_MSI) - goto legacy_irq; - - ret = xhci_setup_msix(xhci); + ret = xhci_try_enable_msi(hcd); if (ret) - /* fall back to msi*/ - ret = xhci_setup_msi(xhci); - - if (ret) { -legacy_irq: - /* fall back to legacy interrupt*/ - ret = request_irq(pdev->irq, &usb_hcd_irq, IRQF_SHARED, - hcd->irq_descr, hcd); - if (ret) { - xhci_err(xhci, "request interrupt %d failed\n", - pdev->irq); - return ret; - } - hcd->irq = pdev->irq; - } + return ret; #ifdef CONFIG_USB_XHCI_HCD_DEBUGGING init_timer(&xhci->event_ring_timer); @@ -694,7 +748,6 @@ int xhci_suspend(struct xhci_hcd *xhci) int rc = 0; struct usb_hcd *hcd = xhci_to_hcd(xhci); u32 command; - int i; spin_lock_irq(&xhci->lock); clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); @@ -730,10 +783,7 @@ int xhci_suspend(struct xhci_hcd *xhci) /* step 5: remove core well power */ /* synchronize irq when using MSI-X */ - if (xhci->msix_entries) { - for (i = 0; i < xhci->msix_count; i++) - synchronize_irq(xhci->msix_entries[i].vector); - } + xhci_msix_sync_irqs(xhci); return rc; } @@ -945,8 +995,7 @@ static int xhci_check_args(struct usb_hcd *hcd, struct usb_device *udev, return -ENODEV; if (check_virt_dev) { - if (!udev->slot_id || !xhci->devs - || !xhci->devs[udev->slot_id]) { + if (!udev->slot_id || !xhci->devs[udev->slot_id]) { printk(KERN_DEBUG "xHCI %s called with unaddressed " "device\n", func); return -EINVAL; @@ -987,7 +1036,7 @@ static int xhci_check_maxpacket(struct xhci_hcd *xhci, unsigned int slot_id, out_ctx = xhci->devs[slot_id]->out_ctx; ep_ctx = xhci_get_ep_ctx(xhci, out_ctx, ep_index); hw_max_packet_size = MAX_PACKET_DECODED(le32_to_cpu(ep_ctx->ep_info2)); - max_packet_size = le16_to_cpu(urb->dev->ep0.desc.wMaxPacketSize); + max_packet_size = usb_endpoint_maxp(&urb->dev->ep0.desc); if (hw_max_packet_size != max_packet_size) { xhci_dbg(xhci, "Max Packet Size for ep 0 changed.\n"); xhci_dbg(xhci, "Max packet size in usb_device = %d\n", @@ -1035,6 +1084,7 @@ static int xhci_check_maxpacket(struct xhci_hcd *xhci, unsigned int slot_id, int xhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags) { struct xhci_hcd *xhci = hcd_to_xhci(hcd); + struct xhci_td *buffer; unsigned long flags; int ret = 0; unsigned int slot_id, ep_index; @@ -1065,13 +1115,15 @@ int xhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags) if (!urb_priv) return -ENOMEM; + buffer = kzalloc(size * sizeof(struct xhci_td), mem_flags); + if (!buffer) { + kfree(urb_priv); + return -ENOMEM; + } + for (i = 0; i < size; i++) { - urb_priv->td[i] = kzalloc(sizeof(struct xhci_td), mem_flags); - if (!urb_priv->td[i]) { - urb_priv->length = i; - xhci_urb_free_priv(xhci, urb_priv); - return -ENOMEM; - } + urb_priv->td[i] = buffer; + buffer++; } urb_priv->length = size; @@ -1085,8 +1137,11 @@ int xhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags) if (urb->dev->speed == USB_SPEED_FULL) { ret = xhci_check_maxpacket(xhci, slot_id, ep_index, urb); - if (ret < 0) + if (ret < 0) { + xhci_urb_free_priv(xhci, urb_priv); + urb->hcpriv = NULL; return ret; + } } /* We have a spinlock and interrupts disabled, so we must pass @@ -1097,6 +1152,8 @@ int xhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags) goto dying; ret = xhci_queue_ctrl_tx(xhci, GFP_ATOMIC, urb, slot_id, ep_index); + if (ret) + goto free_priv; spin_unlock_irqrestore(&xhci->lock, flags); } else if (usb_endpoint_xfer_bulk(&urb->ep->desc)) { spin_lock_irqsave(&xhci->lock, flags); @@ -1117,6 +1174,8 @@ int xhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags) ret = xhci_queue_bulk_tx(xhci, GFP_ATOMIC, urb, slot_id, ep_index); } + if (ret) + goto free_priv; spin_unlock_irqrestore(&xhci->lock, flags); } else if (usb_endpoint_xfer_int(&urb->ep->desc)) { spin_lock_irqsave(&xhci->lock, flags); @@ -1124,6 +1183,8 @@ int xhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags) goto dying; ret = xhci_queue_intr_tx(xhci, GFP_ATOMIC, urb, slot_id, ep_index); + if (ret) + goto free_priv; spin_unlock_irqrestore(&xhci->lock, flags); } else { spin_lock_irqsave(&xhci->lock, flags); @@ -1131,18 +1192,22 @@ int xhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags) goto dying; ret = xhci_queue_isoc_tx_prepare(xhci, GFP_ATOMIC, urb, slot_id, ep_index); + if (ret) + goto free_priv; spin_unlock_irqrestore(&xhci->lock, flags); } exit: return ret; dying: - xhci_urb_free_priv(xhci, urb_priv); - urb->hcpriv = NULL; xhci_dbg(xhci, "Ep 0x%x: URB %p submitted for " "non-responsive xHCI host.\n", urb->ep->desc.bEndpointAddress, urb); + ret = -ESHUTDOWN; +free_priv: + xhci_urb_free_priv(xhci, urb_priv); + urb->hcpriv = NULL; spin_unlock_irqrestore(&xhci->lock, flags); - return -ESHUTDOWN; + return ret; } /* Get the right ring for the given URB. @@ -1239,6 +1304,13 @@ int xhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) if (temp == 0xffffffff || (xhci->xhc_state & XHCI_STATE_HALTED)) { xhci_dbg(xhci, "HW died, freeing TD.\n"); urb_priv = urb->hcpriv; + for (i = urb_priv->td_cnt; i < urb_priv->length; i++) { + td = urb_priv->td[i]; + if (!list_empty(&td->td_list)) + list_del_init(&td->td_list); + if (!list_empty(&td->cancelled_td_list)) + list_del_init(&td->cancelled_td_list); + } usb_hcd_unlink_urb_from_ep(hcd, urb); spin_unlock_irqrestore(&xhci->lock, flags); @@ -1727,6 +1799,564 @@ static void xhci_finish_resource_reservation(struct xhci_hcd *xhci, xhci->num_active_eps); } +unsigned int xhci_get_block_size(struct usb_device *udev) +{ + switch (udev->speed) { + case USB_SPEED_LOW: + case USB_SPEED_FULL: + return FS_BLOCK; + case USB_SPEED_HIGH: + return HS_BLOCK; + case USB_SPEED_SUPER: + return SS_BLOCK; + case USB_SPEED_UNKNOWN: + case USB_SPEED_WIRELESS: + default: + /* Should never happen */ + return 1; + } +} + +unsigned int xhci_get_largest_overhead(struct xhci_interval_bw *interval_bw) +{ + if (interval_bw->overhead[LS_OVERHEAD_TYPE]) + return LS_OVERHEAD; + if (interval_bw->overhead[FS_OVERHEAD_TYPE]) + return FS_OVERHEAD; + return HS_OVERHEAD; +} + +/* If we are changing a LS/FS device under a HS hub, + * make sure (if we are activating a new TT) that the HS bus has enough + * bandwidth for this new TT. + */ +static int xhci_check_tt_bw_table(struct xhci_hcd *xhci, + struct xhci_virt_device *virt_dev, + int old_active_eps) +{ + struct xhci_interval_bw_table *bw_table; + struct xhci_tt_bw_info *tt_info; + + /* Find the bandwidth table for the root port this TT is attached to. */ + bw_table = &xhci->rh_bw[virt_dev->real_port - 1].bw_table; + tt_info = virt_dev->tt_info; + /* If this TT already had active endpoints, the bandwidth for this TT + * has already been added. Removing all periodic endpoints (and thus + * making the TT enactive) will only decrease the bandwidth used. + */ + if (old_active_eps) + return 0; + if (old_active_eps == 0 && tt_info->active_eps != 0) { + if (bw_table->bw_used + TT_HS_OVERHEAD > HS_BW_LIMIT) + return -ENOMEM; + return 0; + } + /* Not sure why we would have no new active endpoints... + * + * Maybe because of an Evaluate Context change for a hub update or a + * control endpoint 0 max packet size change? + * FIXME: skip the bandwidth calculation in that case. + */ + return 0; +} + +static int xhci_check_ss_bw(struct xhci_hcd *xhci, + struct xhci_virt_device *virt_dev) +{ + unsigned int bw_reserved; + + bw_reserved = DIV_ROUND_UP(SS_BW_RESERVED*SS_BW_LIMIT_IN, 100); + if (virt_dev->bw_table->ss_bw_in > (SS_BW_LIMIT_IN - bw_reserved)) + return -ENOMEM; + + bw_reserved = DIV_ROUND_UP(SS_BW_RESERVED*SS_BW_LIMIT_OUT, 100); + if (virt_dev->bw_table->ss_bw_out > (SS_BW_LIMIT_OUT - bw_reserved)) + return -ENOMEM; + + return 0; +} + +/* + * This algorithm is a very conservative estimate of the worst-case scheduling + * scenario for any one interval. The hardware dynamically schedules the + * packets, so we can't tell which microframe could be the limiting factor in + * the bandwidth scheduling. This only takes into account periodic endpoints. + * + * Obviously, we can't solve an NP complete problem to find the minimum worst + * case scenario. Instead, we come up with an estimate that is no less than + * the worst case bandwidth used for any one microframe, but may be an + * over-estimate. + * + * We walk the requirements for each endpoint by interval, starting with the + * smallest interval, and place packets in the schedule where there is only one + * possible way to schedule packets for that interval. In order to simplify + * this algorithm, we record the largest max packet size for each interval, and + * assume all packets will be that size. + * + * For interval 0, we obviously must schedule all packets for each interval. + * The bandwidth for interval 0 is just the amount of data to be transmitted + * (the sum of all max ESIT payload sizes, plus any overhead per packet times + * the number of packets). + * + * For interval 1, we have two possible microframes to schedule those packets + * in. For this algorithm, if we can schedule the same number of packets for + * each possible scheduling opportunity (each microframe), we will do so. The + * remaining number of packets will be saved to be transmitted in the gaps in + * the next interval's scheduling sequence. + * + * As we move those remaining packets to be scheduled with interval 2 packets, + * we have to double the number of remaining packets to transmit. This is + * because the intervals are actually powers of 2, and we would be transmitting + * the previous interval's packets twice in this interval. We also have to be + * sure that when we look at the largest max packet size for this interval, we + * also look at the largest max packet size for the remaining packets and take + * the greater of the two. + * + * The algorithm continues to evenly distribute packets in each scheduling + * opportunity, and push the remaining packets out, until we get to the last + * interval. Then those packets and their associated overhead are just added + * to the bandwidth used. + */ +static int xhci_check_bw_table(struct xhci_hcd *xhci, + struct xhci_virt_device *virt_dev, + int old_active_eps) +{ + unsigned int bw_reserved; + unsigned int max_bandwidth; + unsigned int bw_used; + unsigned int block_size; + struct xhci_interval_bw_table *bw_table; + unsigned int packet_size = 0; + unsigned int overhead = 0; + unsigned int packets_transmitted = 0; + unsigned int packets_remaining = 0; + unsigned int i; + + if (virt_dev->udev->speed == USB_SPEED_SUPER) + return xhci_check_ss_bw(xhci, virt_dev); + + if (virt_dev->udev->speed == USB_SPEED_HIGH) { + max_bandwidth = HS_BW_LIMIT; + /* Convert percent of bus BW reserved to blocks reserved */ + bw_reserved = DIV_ROUND_UP(HS_BW_RESERVED * max_bandwidth, 100); + } else { + max_bandwidth = FS_BW_LIMIT; + bw_reserved = DIV_ROUND_UP(FS_BW_RESERVED * max_bandwidth, 100); + } + + bw_table = virt_dev->bw_table; + /* We need to translate the max packet size and max ESIT payloads into + * the units the hardware uses. + */ + block_size = xhci_get_block_size(virt_dev->udev); + + /* If we are manipulating a LS/FS device under a HS hub, double check + * that the HS bus has enough bandwidth if we are activing a new TT. + */ + if (virt_dev->tt_info) { + xhci_dbg(xhci, "Recalculating BW for rootport %u\n", + virt_dev->real_port); + if (xhci_check_tt_bw_table(xhci, virt_dev, old_active_eps)) { + xhci_warn(xhci, "Not enough bandwidth on HS bus for " + "newly activated TT.\n"); + return -ENOMEM; + } + xhci_dbg(xhci, "Recalculating BW for TT slot %u port %u\n", + virt_dev->tt_info->slot_id, + virt_dev->tt_info->ttport); + } else { + xhci_dbg(xhci, "Recalculating BW for rootport %u\n", + virt_dev->real_port); + } + + /* Add in how much bandwidth will be used for interval zero, or the + * rounded max ESIT payload + number of packets * largest overhead. + */ + bw_used = DIV_ROUND_UP(bw_table->interval0_esit_payload, block_size) + + bw_table->interval_bw[0].num_packets * + xhci_get_largest_overhead(&bw_table->interval_bw[0]); + + for (i = 1; i < XHCI_MAX_INTERVAL; i++) { + unsigned int bw_added; + unsigned int largest_mps; + unsigned int interval_overhead; + + /* + * How many packets could we transmit in this interval? + * If packets didn't fit in the previous interval, we will need + * to transmit that many packets twice within this interval. + */ + packets_remaining = 2 * packets_remaining + + bw_table->interval_bw[i].num_packets; + + /* Find the largest max packet size of this or the previous + * interval. + */ + if (list_empty(&bw_table->interval_bw[i].endpoints)) + largest_mps = 0; + else { + struct xhci_virt_ep *virt_ep; + struct list_head *ep_entry; + + ep_entry = bw_table->interval_bw[i].endpoints.next; + virt_ep = list_entry(ep_entry, + struct xhci_virt_ep, bw_endpoint_list); + /* Convert to blocks, rounding up */ + largest_mps = DIV_ROUND_UP( + virt_ep->bw_info.max_packet_size, + block_size); + } + if (largest_mps > packet_size) + packet_size = largest_mps; + + /* Use the larger overhead of this or the previous interval. */ + interval_overhead = xhci_get_largest_overhead( + &bw_table->interval_bw[i]); + if (interval_overhead > overhead) + overhead = interval_overhead; + + /* How many packets can we evenly distribute across + * (1 << (i + 1)) possible scheduling opportunities? + */ + packets_transmitted = packets_remaining >> (i + 1); + + /* Add in the bandwidth used for those scheduled packets */ + bw_added = packets_transmitted * (overhead + packet_size); + + /* How many packets do we have remaining to transmit? */ + packets_remaining = packets_remaining % (1 << (i + 1)); + + /* What largest max packet size should those packets have? */ + /* If we've transmitted all packets, don't carry over the + * largest packet size. + */ + if (packets_remaining == 0) { + packet_size = 0; + overhead = 0; + } else if (packets_transmitted > 0) { + /* Otherwise if we do have remaining packets, and we've + * scheduled some packets in this interval, take the + * largest max packet size from endpoints with this + * interval. + */ + packet_size = largest_mps; + overhead = interval_overhead; + } + /* Otherwise carry over packet_size and overhead from the last + * time we had a remainder. + */ + bw_used += bw_added; + if (bw_used > max_bandwidth) { + xhci_warn(xhci, "Not enough bandwidth. " + "Proposed: %u, Max: %u\n", + bw_used, max_bandwidth); + return -ENOMEM; + } + } + /* + * Ok, we know we have some packets left over after even-handedly + * scheduling interval 15. We don't know which microframes they will + * fit into, so we over-schedule and say they will be scheduled every + * microframe. + */ + if (packets_remaining > 0) + bw_used += overhead + packet_size; + + if (!virt_dev->tt_info && virt_dev->udev->speed == USB_SPEED_HIGH) { + unsigned int port_index = virt_dev->real_port - 1; + + /* OK, we're manipulating a HS device attached to a + * root port bandwidth domain. Include the number of active TTs + * in the bandwidth used. + */ + bw_used += TT_HS_OVERHEAD * + xhci->rh_bw[port_index].num_active_tts; + } + + xhci_dbg(xhci, "Final bandwidth: %u, Limit: %u, Reserved: %u, " + "Available: %u " "percent\n", + bw_used, max_bandwidth, bw_reserved, + (max_bandwidth - bw_used - bw_reserved) * 100 / + max_bandwidth); + + bw_used += bw_reserved; + if (bw_used > max_bandwidth) { + xhci_warn(xhci, "Not enough bandwidth. Proposed: %u, Max: %u\n", + bw_used, max_bandwidth); + return -ENOMEM; + } + + bw_table->bw_used = bw_used; + return 0; +} + +static bool xhci_is_async_ep(unsigned int ep_type) +{ + return (ep_type != ISOC_OUT_EP && ep_type != INT_OUT_EP && + ep_type != ISOC_IN_EP && + ep_type != INT_IN_EP); +} + +static bool xhci_is_sync_in_ep(unsigned int ep_type) +{ + return (ep_type == ISOC_IN_EP || ep_type != INT_IN_EP); +} + +static unsigned int xhci_get_ss_bw_consumed(struct xhci_bw_info *ep_bw) +{ + unsigned int mps = DIV_ROUND_UP(ep_bw->max_packet_size, SS_BLOCK); + + if (ep_bw->ep_interval == 0) + return SS_OVERHEAD_BURST + + (ep_bw->mult * ep_bw->num_packets * + (SS_OVERHEAD + mps)); + return DIV_ROUND_UP(ep_bw->mult * ep_bw->num_packets * + (SS_OVERHEAD + mps + SS_OVERHEAD_BURST), + 1 << ep_bw->ep_interval); + +} + +void xhci_drop_ep_from_interval_table(struct xhci_hcd *xhci, + struct xhci_bw_info *ep_bw, + struct xhci_interval_bw_table *bw_table, + struct usb_device *udev, + struct xhci_virt_ep *virt_ep, + struct xhci_tt_bw_info *tt_info) +{ + struct xhci_interval_bw *interval_bw; + int normalized_interval; + + if (xhci_is_async_ep(ep_bw->type)) + return; + + if (udev->speed == USB_SPEED_SUPER) { + if (xhci_is_sync_in_ep(ep_bw->type)) + xhci->devs[udev->slot_id]->bw_table->ss_bw_in -= + xhci_get_ss_bw_consumed(ep_bw); + else + xhci->devs[udev->slot_id]->bw_table->ss_bw_out -= + xhci_get_ss_bw_consumed(ep_bw); + return; + } + + /* SuperSpeed endpoints never get added to intervals in the table, so + * this check is only valid for HS/FS/LS devices. + */ + if (list_empty(&virt_ep->bw_endpoint_list)) + return; + /* For LS/FS devices, we need to translate the interval expressed in + * microframes to frames. + */ + if (udev->speed == USB_SPEED_HIGH) + normalized_interval = ep_bw->ep_interval; + else + normalized_interval = ep_bw->ep_interval - 3; + + if (normalized_interval == 0) + bw_table->interval0_esit_payload -= ep_bw->max_esit_payload; + interval_bw = &bw_table->interval_bw[normalized_interval]; + interval_bw->num_packets -= ep_bw->num_packets; + switch (udev->speed) { + case USB_SPEED_LOW: + interval_bw->overhead[LS_OVERHEAD_TYPE] -= 1; + break; + case USB_SPEED_FULL: + interval_bw->overhead[FS_OVERHEAD_TYPE] -= 1; + break; + case USB_SPEED_HIGH: + interval_bw->overhead[HS_OVERHEAD_TYPE] -= 1; + break; + case USB_SPEED_SUPER: + case USB_SPEED_UNKNOWN: + case USB_SPEED_WIRELESS: + /* Should never happen because only LS/FS/HS endpoints will get + * added to the endpoint list. + */ + return; + } + if (tt_info) + tt_info->active_eps -= 1; + list_del_init(&virt_ep->bw_endpoint_list); +} + +static void xhci_add_ep_to_interval_table(struct xhci_hcd *xhci, + struct xhci_bw_info *ep_bw, + struct xhci_interval_bw_table *bw_table, + struct usb_device *udev, + struct xhci_virt_ep *virt_ep, + struct xhci_tt_bw_info *tt_info) +{ + struct xhci_interval_bw *interval_bw; + struct xhci_virt_ep *smaller_ep; + int normalized_interval; + + if (xhci_is_async_ep(ep_bw->type)) + return; + + if (udev->speed == USB_SPEED_SUPER) { + if (xhci_is_sync_in_ep(ep_bw->type)) + xhci->devs[udev->slot_id]->bw_table->ss_bw_in += + xhci_get_ss_bw_consumed(ep_bw); + else + xhci->devs[udev->slot_id]->bw_table->ss_bw_out += + xhci_get_ss_bw_consumed(ep_bw); + return; + } + + /* For LS/FS devices, we need to translate the interval expressed in + * microframes to frames. + */ + if (udev->speed == USB_SPEED_HIGH) + normalized_interval = ep_bw->ep_interval; + else + normalized_interval = ep_bw->ep_interval - 3; + + if (normalized_interval == 0) + bw_table->interval0_esit_payload += ep_bw->max_esit_payload; + interval_bw = &bw_table->interval_bw[normalized_interval]; + interval_bw->num_packets += ep_bw->num_packets; + switch (udev->speed) { + case USB_SPEED_LOW: + interval_bw->overhead[LS_OVERHEAD_TYPE] += 1; + break; + case USB_SPEED_FULL: + interval_bw->overhead[FS_OVERHEAD_TYPE] += 1; + break; + case USB_SPEED_HIGH: + interval_bw->overhead[HS_OVERHEAD_TYPE] += 1; + break; + case USB_SPEED_SUPER: + case USB_SPEED_UNKNOWN: + case USB_SPEED_WIRELESS: + /* Should never happen because only LS/FS/HS endpoints will get + * added to the endpoint list. + */ + return; + } + + if (tt_info) + tt_info->active_eps += 1; + /* Insert the endpoint into the list, largest max packet size first. */ + list_for_each_entry(smaller_ep, &interval_bw->endpoints, + bw_endpoint_list) { + if (ep_bw->max_packet_size >= + smaller_ep->bw_info.max_packet_size) { + /* Add the new ep before the smaller endpoint */ + list_add_tail(&virt_ep->bw_endpoint_list, + &smaller_ep->bw_endpoint_list); + return; + } + } + /* Add the new endpoint at the end of the list. */ + list_add_tail(&virt_ep->bw_endpoint_list, + &interval_bw->endpoints); +} + +void xhci_update_tt_active_eps(struct xhci_hcd *xhci, + struct xhci_virt_device *virt_dev, + int old_active_eps) +{ + struct xhci_root_port_bw_info *rh_bw_info; + if (!virt_dev->tt_info) + return; + + rh_bw_info = &xhci->rh_bw[virt_dev->real_port - 1]; + if (old_active_eps == 0 && + virt_dev->tt_info->active_eps != 0) { + rh_bw_info->num_active_tts += 1; + rh_bw_info->bw_table.bw_used += TT_HS_OVERHEAD; + } else if (old_active_eps != 0 && + virt_dev->tt_info->active_eps == 0) { + rh_bw_info->num_active_tts -= 1; + rh_bw_info->bw_table.bw_used -= TT_HS_OVERHEAD; + } +} + +static int xhci_reserve_bandwidth(struct xhci_hcd *xhci, + struct xhci_virt_device *virt_dev, + struct xhci_container_ctx *in_ctx) +{ + struct xhci_bw_info ep_bw_info[31]; + int i; + struct xhci_input_control_ctx *ctrl_ctx; + int old_active_eps = 0; + + if (virt_dev->tt_info) + old_active_eps = virt_dev->tt_info->active_eps; + + ctrl_ctx = xhci_get_input_control_ctx(xhci, in_ctx); + + for (i = 0; i < 31; i++) { + if (!EP_IS_ADDED(ctrl_ctx, i) && !EP_IS_DROPPED(ctrl_ctx, i)) + continue; + + /* Make a copy of the BW info in case we need to revert this */ + memcpy(&ep_bw_info[i], &virt_dev->eps[i].bw_info, + sizeof(ep_bw_info[i])); + /* Drop the endpoint from the interval table if the endpoint is + * being dropped or changed. + */ + if (EP_IS_DROPPED(ctrl_ctx, i)) + xhci_drop_ep_from_interval_table(xhci, + &virt_dev->eps[i].bw_info, + virt_dev->bw_table, + virt_dev->udev, + &virt_dev->eps[i], + virt_dev->tt_info); + } + /* Overwrite the information stored in the endpoints' bw_info */ + xhci_update_bw_info(xhci, virt_dev->in_ctx, ctrl_ctx, virt_dev); + for (i = 0; i < 31; i++) { + /* Add any changed or added endpoints to the interval table */ + if (EP_IS_ADDED(ctrl_ctx, i)) + xhci_add_ep_to_interval_table(xhci, + &virt_dev->eps[i].bw_info, + virt_dev->bw_table, + virt_dev->udev, + &virt_dev->eps[i], + virt_dev->tt_info); + } + + if (!xhci_check_bw_table(xhci, virt_dev, old_active_eps)) { + /* Ok, this fits in the bandwidth we have. + * Update the number of active TTs. + */ + xhci_update_tt_active_eps(xhci, virt_dev, old_active_eps); + return 0; + } + + /* We don't have enough bandwidth for this, revert the stored info. */ + for (i = 0; i < 31; i++) { + if (!EP_IS_ADDED(ctrl_ctx, i) && !EP_IS_DROPPED(ctrl_ctx, i)) + continue; + + /* Drop the new copies of any added or changed endpoints from + * the interval table. + */ + if (EP_IS_ADDED(ctrl_ctx, i)) { + xhci_drop_ep_from_interval_table(xhci, + &virt_dev->eps[i].bw_info, + virt_dev->bw_table, + virt_dev->udev, + &virt_dev->eps[i], + virt_dev->tt_info); + } + /* Revert the endpoint back to its old information */ + memcpy(&virt_dev->eps[i].bw_info, &ep_bw_info[i], + sizeof(ep_bw_info[i])); + /* Add any changed or dropped endpoints back into the table */ + if (EP_IS_DROPPED(ctrl_ctx, i)) + xhci_add_ep_to_interval_table(xhci, + &virt_dev->eps[i].bw_info, + virt_dev->bw_table, + virt_dev->udev, + &virt_dev->eps[i], + virt_dev->tt_info); + } + return -ENOMEM; +} + + /* Issue a configure endpoint command or evaluate context command * and wait for it to finish. */ @@ -1745,17 +2375,30 @@ static int xhci_configure_endpoint(struct xhci_hcd *xhci, spin_lock_irqsave(&xhci->lock, flags); virt_dev = xhci->devs[udev->slot_id]; - if (command) { + + if (command) in_ctx = command->in_ctx; - if ((xhci->quirks & XHCI_EP_LIMIT_QUIRK) && - xhci_reserve_host_resources(xhci, in_ctx)) { - spin_unlock_irqrestore(&xhci->lock, flags); - xhci_warn(xhci, "Not enough host resources, " - "active endpoint contexts = %u\n", - xhci->num_active_eps); - return -ENOMEM; - } + else + in_ctx = virt_dev->in_ctx; + + if ((xhci->quirks & XHCI_EP_LIMIT_QUIRK) && + xhci_reserve_host_resources(xhci, in_ctx)) { + spin_unlock_irqrestore(&xhci->lock, flags); + xhci_warn(xhci, "Not enough host resources, " + "active endpoint contexts = %u\n", + xhci->num_active_eps); + return -ENOMEM; + } + if ((xhci->quirks & XHCI_SW_BW_CHECKING) && + xhci_reserve_bandwidth(xhci, virt_dev, in_ctx)) { + if ((xhci->quirks & XHCI_EP_LIMIT_QUIRK)) + xhci_free_host_resources(xhci, in_ctx); + spin_unlock_irqrestore(&xhci->lock, flags); + xhci_warn(xhci, "Not enough bandwidth\n"); + return -ENOMEM; + } + if (command) { cmd_completion = command->completion; cmd_status = &command->status; command->command_trb = xhci->cmd_ring->enqueue; @@ -1769,15 +2412,6 @@ static int xhci_configure_endpoint(struct xhci_hcd *xhci, list_add_tail(&command->cmd_list, &virt_dev->cmd_list); } else { - in_ctx = virt_dev->in_ctx; - if ((xhci->quirks & XHCI_EP_LIMIT_QUIRK) && - xhci_reserve_host_resources(xhci, in_ctx)) { - spin_unlock_irqrestore(&xhci->lock, flags); - xhci_warn(xhci, "Not enough host resources, " - "active endpoint contexts = %u\n", - xhci->num_active_eps); - return -ENOMEM; - } cmd_completion = &virt_dev->cmd_completion; cmd_status = &virt_dev->cmd_status; } @@ -1868,6 +2502,12 @@ int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev) ctrl_ctx->add_flags |= cpu_to_le32(SLOT_FLAG); ctrl_ctx->add_flags &= cpu_to_le32(~EP0_FLAG); ctrl_ctx->drop_flags &= cpu_to_le32(~(SLOT_FLAG | EP0_FLAG)); + + /* Don't issue the command if there's no endpoints to update. */ + if (ctrl_ctx->add_flags == cpu_to_le32(SLOT_FLAG) && + ctrl_ctx->drop_flags == 0) + return 0; + xhci_dbg(xhci, "New Input Control Context:\n"); slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->in_ctx); xhci_dbg_ctx(xhci, virt_dev->in_ctx, @@ -2505,6 +3145,7 @@ int xhci_discover_or_reset_device(struct usb_hcd *hcd, struct usb_device *udev) int timeleft; int last_freed_endpoint; struct xhci_slot_ctx *slot_ctx; + int old_active_eps = 0; ret = xhci_check_args(hcd, udev, NULL, 0, false, __func__); if (ret <= 0) @@ -2646,7 +3287,18 @@ int xhci_discover_or_reset_device(struct usb_hcd *hcd, struct usb_device *udev) xhci_free_or_cache_endpoint_ring(xhci, virt_dev, i); last_freed_endpoint = i; } - } + if (!list_empty(&virt_dev->eps[i].bw_endpoint_list)) + xhci_drop_ep_from_interval_table(xhci, + &virt_dev->eps[i].bw_info, + virt_dev->bw_table, + udev, + &virt_dev->eps[i], + virt_dev->tt_info); + xhci_clear_endpoint_bw_info(&virt_dev->eps[i].bw_info); + } + /* If necessary, update the number of active TTs on this root port */ + xhci_update_tt_active_eps(xhci, virt_dev, old_active_eps); + xhci_dbg(xhci, "Output context after successful reset device cmd:\n"); xhci_dbg_ctx(xhci, virt_dev->out_ctx, last_freed_endpoint); ret = 0; @@ -2684,6 +3336,11 @@ void xhci_free_dev(struct usb_hcd *hcd, struct usb_device *udev) del_timer_sync(&virt_dev->eps[i].stop_cmd_timer); } + if (udev->usb2_hw_lpm_enabled) { + xhci_set_usb2_hardware_lpm(hcd, udev, 0); + udev->usb2_hw_lpm_enabled = 0; + } + spin_lock_irqsave(&xhci->lock, flags); /* Don't disable the slot if the host controller is dead. */ state = xhci_readl(xhci, &xhci->op_regs->status); @@ -2869,7 +3526,7 @@ int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev) * command on a timeout. */ if (timeleft <= 0) { - xhci_warn(xhci, "%s while waiting for a slot\n", + xhci_warn(xhci, "%s while waiting for address device command\n", timeleft == 0 ? "Timeout" : "Signal"); /* FIXME cancel the address device command */ return -ETIME; @@ -2937,6 +3594,254 @@ int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev) return 0; } +#ifdef CONFIG_USB_SUSPEND + +/* BESL to HIRD Encoding array for USB2 LPM */ +static int xhci_besl_encoding[16] = {125, 150, 200, 300, 400, 500, 1000, 2000, + 3000, 4000, 5000, 6000, 7000, 8000, 9000, 10000}; + +/* Calculate HIRD/BESL for USB2 PORTPMSC*/ +static int xhci_calculate_hird_besl(int u2del, bool use_besl) +{ + int hird; + + if (use_besl) { + for (hird = 0; hird < 16; hird++) { + if (xhci_besl_encoding[hird] >= u2del) + break; + } + } else { + if (u2del <= 50) + hird = 0; + else + hird = (u2del - 51) / 75 + 1; + + if (hird > 15) + hird = 15; + } + + return hird; +} + +static int xhci_usb2_software_lpm_test(struct usb_hcd *hcd, + struct usb_device *udev) +{ + struct xhci_hcd *xhci = hcd_to_xhci(hcd); + struct dev_info *dev_info; + __le32 __iomem **port_array; + __le32 __iomem *addr, *pm_addr; + u32 temp, dev_id; + unsigned int port_num; + unsigned long flags; + int u2del, hird; + int ret; + + if (hcd->speed == HCD_USB3 || !xhci->sw_lpm_support || + !udev->lpm_capable) + return -EINVAL; + + /* we only support lpm for non-hub device connected to root hub yet */ + if (!udev->parent || udev->parent->parent || + udev->descriptor.bDeviceClass == USB_CLASS_HUB) + return -EINVAL; + + spin_lock_irqsave(&xhci->lock, flags); + + /* Look for devices in lpm_failed_devs list */ + dev_id = le16_to_cpu(udev->descriptor.idVendor) << 16 | + le16_to_cpu(udev->descriptor.idProduct); + list_for_each_entry(dev_info, &xhci->lpm_failed_devs, list) { + if (dev_info->dev_id == dev_id) { + ret = -EINVAL; + goto finish; + } + } + + port_array = xhci->usb2_ports; + port_num = udev->portnum - 1; + + if (port_num > HCS_MAX_PORTS(xhci->hcs_params1)) { + xhci_dbg(xhci, "invalid port number %d\n", udev->portnum); + ret = -EINVAL; + goto finish; + } + + /* + * Test USB 2.0 software LPM. + * FIXME: some xHCI 1.0 hosts may implement a new register to set up + * hardware-controlled USB 2.0 LPM. See section 5.4.11 and 4.23.5.1.1.1 + * in the June 2011 errata release. + */ + xhci_dbg(xhci, "test port %d software LPM\n", port_num); + /* + * Set L1 Device Slot and HIRD/BESL. + * Check device's USB 2.0 extension descriptor to determine whether + * HIRD or BESL shoule be used. See USB2.0 LPM errata. + */ + pm_addr = port_array[port_num] + 1; + u2del = HCS_U2_LATENCY(xhci->hcs_params3); + if (le32_to_cpu(udev->bos->ext_cap->bmAttributes) & (1 << 2)) + hird = xhci_calculate_hird_besl(u2del, 1); + else + hird = xhci_calculate_hird_besl(u2del, 0); + + temp = PORT_L1DS(udev->slot_id) | PORT_HIRD(hird); + xhci_writel(xhci, temp, pm_addr); + + /* Set port link state to U2(L1) */ + addr = port_array[port_num]; + xhci_set_link_state(xhci, port_array, port_num, XDEV_U2); + + /* wait for ACK */ + spin_unlock_irqrestore(&xhci->lock, flags); + msleep(10); + spin_lock_irqsave(&xhci->lock, flags); + + /* Check L1 Status */ + ret = handshake(xhci, pm_addr, PORT_L1S_MASK, PORT_L1S_SUCCESS, 125); + if (ret != -ETIMEDOUT) { + /* enter L1 successfully */ + temp = xhci_readl(xhci, addr); + xhci_dbg(xhci, "port %d entered L1 state, port status 0x%x\n", + port_num, temp); + ret = 0; + } else { + temp = xhci_readl(xhci, pm_addr); + xhci_dbg(xhci, "port %d software lpm failed, L1 status %d\n", + port_num, temp & PORT_L1S_MASK); + ret = -EINVAL; + } + + /* Resume the port */ + xhci_set_link_state(xhci, port_array, port_num, XDEV_U0); + + spin_unlock_irqrestore(&xhci->lock, flags); + msleep(10); + spin_lock_irqsave(&xhci->lock, flags); + + /* Clear PLC */ + xhci_test_and_clear_bit(xhci, port_array, port_num, PORT_PLC); + + /* Check PORTSC to make sure the device is in the right state */ + if (!ret) { + temp = xhci_readl(xhci, addr); + xhci_dbg(xhci, "resumed port %d status 0x%x\n", port_num, temp); + if (!(temp & PORT_CONNECT) || !(temp & PORT_PE) || + (temp & PORT_PLS_MASK) != XDEV_U0) { + xhci_dbg(xhci, "port L1 resume fail\n"); + ret = -EINVAL; + } + } + + if (ret) { + /* Insert dev to lpm_failed_devs list */ + xhci_warn(xhci, "device LPM test failed, may disconnect and " + "re-enumerate\n"); + dev_info = kzalloc(sizeof(struct dev_info), GFP_ATOMIC); + if (!dev_info) { + ret = -ENOMEM; + goto finish; + } + dev_info->dev_id = dev_id; + INIT_LIST_HEAD(&dev_info->list); + list_add(&dev_info->list, &xhci->lpm_failed_devs); + } else { + xhci_ring_device(xhci, udev->slot_id); + } + +finish: + spin_unlock_irqrestore(&xhci->lock, flags); + return ret; +} + +int xhci_set_usb2_hardware_lpm(struct usb_hcd *hcd, + struct usb_device *udev, int enable) +{ + struct xhci_hcd *xhci = hcd_to_xhci(hcd); + __le32 __iomem **port_array; + __le32 __iomem *pm_addr; + u32 temp; + unsigned int port_num; + unsigned long flags; + int u2del, hird; + + if (hcd->speed == HCD_USB3 || !xhci->hw_lpm_support || + !udev->lpm_capable) + return -EPERM; + + if (!udev->parent || udev->parent->parent || + udev->descriptor.bDeviceClass == USB_CLASS_HUB) + return -EPERM; + + if (udev->usb2_hw_lpm_capable != 1) + return -EPERM; + + spin_lock_irqsave(&xhci->lock, flags); + + port_array = xhci->usb2_ports; + port_num = udev->portnum - 1; + pm_addr = port_array[port_num] + 1; + temp = xhci_readl(xhci, pm_addr); + + xhci_dbg(xhci, "%s port %d USB2 hardware LPM\n", + enable ? "enable" : "disable", port_num); + + u2del = HCS_U2_LATENCY(xhci->hcs_params3); + if (le32_to_cpu(udev->bos->ext_cap->bmAttributes) & (1 << 2)) + hird = xhci_calculate_hird_besl(u2del, 1); + else + hird = xhci_calculate_hird_besl(u2del, 0); + + if (enable) { + temp &= ~PORT_HIRD_MASK; + temp |= PORT_HIRD(hird) | PORT_RWE; + xhci_writel(xhci, temp, pm_addr); + temp = xhci_readl(xhci, pm_addr); + temp |= PORT_HLE; + xhci_writel(xhci, temp, pm_addr); + } else { + temp &= ~(PORT_HLE | PORT_RWE | PORT_HIRD_MASK); + xhci_writel(xhci, temp, pm_addr); + } + + spin_unlock_irqrestore(&xhci->lock, flags); + return 0; +} + +int xhci_update_device(struct usb_hcd *hcd, struct usb_device *udev) +{ + struct xhci_hcd *xhci = hcd_to_xhci(hcd); + int ret; + + ret = xhci_usb2_software_lpm_test(hcd, udev); + if (!ret) { + xhci_dbg(xhci, "software LPM test succeed\n"); + if (xhci->hw_lpm_support == 1) { + udev->usb2_hw_lpm_capable = 1; + ret = xhci_set_usb2_hardware_lpm(hcd, udev, 1); + if (!ret) + udev->usb2_hw_lpm_enabled = 1; + } + } + + return 0; +} + +#else + +int xhci_set_usb2_hardware_lpm(struct usb_hcd *hcd, + struct usb_device *udev, int enable) +{ + return 0; +} + +int xhci_update_device(struct usb_hcd *hcd, struct usb_device *udev) +{ + return 0; +} + +#endif /* CONFIG_USB_SUSPEND */ + /* Once a hub descriptor is fetched for a device, we need to update the xHC's * internal data structures for the device. */ @@ -2968,6 +3873,14 @@ int xhci_update_hub_device(struct usb_hcd *hcd, struct usb_device *hdev, } spin_lock_irqsave(&xhci->lock, flags); + if (hdev->speed == USB_SPEED_HIGH && + xhci_alloc_tt_info(xhci, vdev, hdev, tt, GFP_ATOMIC)) { + xhci_dbg(xhci, "Could not allocate xHCI TT structure.\n"); + xhci_free_command(xhci, config_cmd); + spin_unlock_irqrestore(&xhci->lock, flags); + return -ENOMEM; + } + xhci_slot_copy(xhci, config_cmd->in_ctx, vdev->out_ctx); ctrl_ctx = xhci_get_input_control_ctx(xhci, config_cmd->in_ctx); ctrl_ctx->add_flags |= cpu_to_le32(SLOT_FLAG); @@ -3031,22 +3944,108 @@ int xhci_get_frame(struct usb_hcd *hcd) return xhci_readl(xhci, &xhci->run_regs->microframe_index) >> 3; } +int xhci_gen_setup(struct usb_hcd *hcd, xhci_get_quirks_t get_quirks) +{ + struct xhci_hcd *xhci; + struct device *dev = hcd->self.controller; + int retval; + u32 temp; + + hcd->self.sg_tablesize = TRBS_PER_SEGMENT - 2; + + if (usb_hcd_is_primary_hcd(hcd)) { + xhci = kzalloc(sizeof(struct xhci_hcd), GFP_KERNEL); + if (!xhci) + return -ENOMEM; + *((struct xhci_hcd **) hcd->hcd_priv) = xhci; + xhci->main_hcd = hcd; + /* Mark the first roothub as being USB 2.0. + * The xHCI driver will register the USB 3.0 roothub. + */ + hcd->speed = HCD_USB2; + hcd->self.root_hub->speed = USB_SPEED_HIGH; + /* + * USB 2.0 roothub under xHCI has an integrated TT, + * (rate matching hub) as opposed to having an OHCI/UHCI + * companion controller. + */ + hcd->has_tt = 1; + } else { + /* xHCI private pointer was set in xhci_pci_probe for the second + * registered roothub. + */ + xhci = hcd_to_xhci(hcd); + temp = xhci_readl(xhci, &xhci->cap_regs->hcc_params); + if (HCC_64BIT_ADDR(temp)) { + xhci_dbg(xhci, "Enabling 64-bit DMA addresses.\n"); + dma_set_mask(hcd->self.controller, DMA_BIT_MASK(64)); + } else { + dma_set_mask(hcd->self.controller, DMA_BIT_MASK(32)); + } + return 0; + } + + xhci->cap_regs = hcd->regs; + xhci->op_regs = hcd->regs + + HC_LENGTH(xhci_readl(xhci, &xhci->cap_regs->hc_capbase)); + xhci->run_regs = hcd->regs + + (xhci_readl(xhci, &xhci->cap_regs->run_regs_off) & RTSOFF_MASK); + /* Cache read-only capability registers */ + xhci->hcs_params1 = xhci_readl(xhci, &xhci->cap_regs->hcs_params1); + xhci->hcs_params2 = xhci_readl(xhci, &xhci->cap_regs->hcs_params2); + xhci->hcs_params3 = xhci_readl(xhci, &xhci->cap_regs->hcs_params3); + xhci->hcc_params = xhci_readl(xhci, &xhci->cap_regs->hc_capbase); + xhci->hci_version = HC_VERSION(xhci->hcc_params); + xhci->hcc_params = xhci_readl(xhci, &xhci->cap_regs->hcc_params); + xhci_print_registers(xhci); + + get_quirks(dev, xhci); + + /* Make sure the HC is halted. */ + retval = xhci_halt(xhci); + if (retval) + goto error; + + xhci_dbg(xhci, "Resetting HCD\n"); + /* Reset the internal HC memory state and registers. */ + retval = xhci_reset(xhci); + if (retval) + goto error; + xhci_dbg(xhci, "Reset complete\n"); + + temp = xhci_readl(xhci, &xhci->cap_regs->hcc_params); + if (HCC_64BIT_ADDR(temp)) { + xhci_dbg(xhci, "Enabling 64-bit DMA addresses.\n"); + dma_set_mask(hcd->self.controller, DMA_BIT_MASK(64)); + } else { + dma_set_mask(hcd->self.controller, DMA_BIT_MASK(32)); + } + + xhci_dbg(xhci, "Calling HCD init\n"); + /* Initialize HCD and host controller data structures. */ + retval = xhci_init(hcd); + if (retval) + goto error; + xhci_dbg(xhci, "Called HCD init\n"); + return 0; +error: + kfree(xhci); + return retval; +} + MODULE_DESCRIPTION(DRIVER_DESC); MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_LICENSE("GPL"); static int __init xhci_hcd_init(void) { -#ifdef CONFIG_PCI - int retval = 0; + int retval; retval = xhci_register_pci(); - if (retval < 0) { printk(KERN_DEBUG "Problem registering PCI driver."); return retval; } -#endif /* * Check the compiler generated sizes of structures that must be laid * out in specific ways for hardware access. @@ -3071,8 +4070,6 @@ module_init(xhci_hcd_init); static void __exit xhci_hcd_cleanup(void) { -#ifdef CONFIG_PCI xhci_unregister_pci(); -#endif } module_exit(xhci_hcd_cleanup); diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index cae8e23308bf..3c8fbd2772ea 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -272,6 +272,7 @@ struct xhci_op_regs { */ #define PORT_PLS_MASK (0xf << 5) #define XDEV_U0 (0x0 << 5) +#define XDEV_U2 (0x2 << 5) #define XDEV_U3 (0x3 << 5) #define XDEV_RESUME (0xf << 5) /* true: port has power (see HCC_PPC) */ @@ -362,7 +363,13 @@ struct xhci_op_regs { /* Bits 24:31 for port testing */ /* USB2 Protocol PORTSPMSC */ -#define PORT_RWE (1 << 0x3) +#define PORT_L1S_MASK 7 +#define PORT_L1S_SUCCESS 1 +#define PORT_RWE (1 << 3) +#define PORT_HIRD(p) (((p) & 0xf) << 4) +#define PORT_HIRD_MASK (0xf << 4) +#define PORT_L1DS(p) (((p) & 0xff) << 8) +#define PORT_HLE (1 << 16) /** * struct xhci_intr_reg - Interrupt Register Set @@ -611,11 +618,13 @@ struct xhci_ep_ctx { #define EP_STATE_ERROR 4 /* Mult - Max number of burtst within an interval, in EP companion desc. */ #define EP_MULT(p) (((p) & 0x3) << 8) +#define CTX_TO_EP_MULT(p) (((p) >> 8) & 0x3) /* bits 10:14 are Max Primary Streams */ /* bit 15 is Linear Stream Array */ /* Interval - period between requests to an endpoint - 125u increments. */ #define EP_INTERVAL(p) (((p) & 0xff) << 16) #define EP_INTERVAL_TO_UFRAMES(p) (1 << (((p) >> 16) & 0xff)) +#define CTX_TO_EP_INTERVAL(p) (((p) >> 16) & 0xff) #define EP_MAXPSTREAMS_MASK (0x1f << 10) #define EP_MAXPSTREAMS(p) (((p) << 10) & EP_MAXPSTREAMS_MASK) /* Endpoint is set up with a Linear Stream Array (vs. Secondary Stream Array) */ @@ -640,6 +649,7 @@ struct xhci_ep_ctx { /* bit 6 reserved */ /* bit 7 is Host Initiate Disable - for disabling stream selection */ #define MAX_BURST(p) (((p)&0xff) << 8) +#define CTX_TO_MAX_BURST(p) (((p) >> 8) & 0xff) #define MAX_PACKET(p) (((p)&0xffff) << 16) #define MAX_PACKET_MASK (0xffff << 16) #define MAX_PACKET_DECODED(p) (((p) >> 16) & 0xffff) @@ -652,6 +662,7 @@ struct xhci_ep_ctx { /* tx_info bitmasks */ #define AVG_TRB_LENGTH_FOR_EP(p) ((p) & 0xffff) #define MAX_ESIT_PAYLOAD_FOR_EP(p) (((p) & 0xffff) << 16) +#define CTX_TO_MAX_ESIT_PAYLOAD(p) (((p) >> 16) & 0xffff) /* deq bitmasks */ #define EP_CTX_CYCLE_MASK (1 << 0) @@ -670,6 +681,11 @@ struct xhci_input_control_ctx { __le32 rsvd2[6]; }; +#define EP_IS_ADDED(ctrl_ctx, i) \ + (le32_to_cpu(ctrl_ctx->add_flags) & (1 << (i + 1))) +#define EP_IS_DROPPED(ctrl_ctx, i) \ + (le32_to_cpu(ctrl_ctx->drop_flags) & (1 << (i + 1))) + /* Represents everything that is needed to issue a command on the command ring. * It's useful to pre-allocate these for commands that cannot fail due to * out-of-memory errors, like freeing streams. @@ -731,6 +747,67 @@ struct xhci_stream_info { #define SMALL_STREAM_ARRAY_SIZE 256 #define MEDIUM_STREAM_ARRAY_SIZE 1024 +/* Some Intel xHCI host controllers need software to keep track of the bus + * bandwidth. Keep track of endpoint info here. Each root port is allocated + * the full bus bandwidth. We must also treat TTs (including each port under a + * multi-TT hub) as a separate bandwidth domain. The direct memory interface + * (DMI) also limits the total bandwidth (across all domains) that can be used. + */ +struct xhci_bw_info { + /* ep_interval is zero-based */ + unsigned int ep_interval; + /* mult and num_packets are one-based */ + unsigned int mult; + unsigned int num_packets; + unsigned int max_packet_size; + unsigned int max_esit_payload; + unsigned int type; +}; + +/* "Block" sizes in bytes the hardware uses for different device speeds. + * The logic in this part of the hardware limits the number of bits the hardware + * can use, so must represent bandwidth in a less precise manner to mimic what + * the scheduler hardware computes. + */ +#define FS_BLOCK 1 +#define HS_BLOCK 4 +#define SS_BLOCK 16 +#define DMI_BLOCK 32 + +/* Each device speed has a protocol overhead (CRC, bit stuffing, etc) associated + * with each byte transferred. SuperSpeed devices have an initial overhead to + * set up bursts. These are in blocks, see above. LS overhead has already been + * translated into FS blocks. + */ +#define DMI_OVERHEAD 8 +#define DMI_OVERHEAD_BURST 4 +#define SS_OVERHEAD 8 +#define SS_OVERHEAD_BURST 32 +#define HS_OVERHEAD 26 +#define FS_OVERHEAD 20 +#define LS_OVERHEAD 128 +/* The TTs need to claim roughly twice as much bandwidth (94 bytes per + * microframe ~= 24Mbps) of the HS bus as the devices can actually use because + * of overhead associated with split transfers crossing microframe boundaries. + * 31 blocks is pure protocol overhead. + */ +#define TT_HS_OVERHEAD (31 + 94) +#define TT_DMI_OVERHEAD (25 + 12) + +/* Bandwidth limits in blocks */ +#define FS_BW_LIMIT 1285 +#define TT_BW_LIMIT 1320 +#define HS_BW_LIMIT 1607 +#define SS_BW_LIMIT_IN 3906 +#define DMI_BW_LIMIT_IN 3906 +#define SS_BW_LIMIT_OUT 3906 +#define DMI_BW_LIMIT_OUT 3906 + +/* Percentage of bus bandwidth reserved for non-periodic transfers */ +#define FS_BW_RESERVED 10 +#define HS_BW_RESERVED 20 +#define SS_BW_RESERVED 10 + struct xhci_virt_ep { struct xhci_ring *ring; /* Related to endpoints that are configured to use stream IDs only */ @@ -772,8 +849,39 @@ struct xhci_virt_ep { * process the missed tds on the endpoint ring. */ bool skip; + /* Bandwidth checking storage */ + struct xhci_bw_info bw_info; + struct list_head bw_endpoint_list; +}; + +enum xhci_overhead_type { + LS_OVERHEAD_TYPE = 0, + FS_OVERHEAD_TYPE, + HS_OVERHEAD_TYPE, +}; + +struct xhci_interval_bw { + unsigned int num_packets; + /* Sorted by max packet size. + * Head of the list is the greatest max packet size. + */ + struct list_head endpoints; + /* How many endpoints of each speed are present. */ + unsigned int overhead[3]; +}; + +#define XHCI_MAX_INTERVAL 16 + +struct xhci_interval_bw_table { + unsigned int interval0_esit_payload; + struct xhci_interval_bw interval_bw[XHCI_MAX_INTERVAL]; + /* Includes reserved bandwidth for async endpoints */ + unsigned int bw_used; + unsigned int ss_bw_in; + unsigned int ss_bw_out; }; + struct xhci_virt_device { struct usb_device *udev; /* @@ -798,7 +906,32 @@ struct xhci_virt_device { /* Status of the last command issued for this device */ u32 cmd_status; struct list_head cmd_list; - u8 port; + u8 fake_port; + u8 real_port; + struct xhci_interval_bw_table *bw_table; + struct xhci_tt_bw_info *tt_info; +}; + +/* + * For each roothub, keep track of the bandwidth information for each periodic + * interval. + * + * If a high speed hub is attached to the roothub, each TT associated with that + * hub is a separate bandwidth domain. The interval information for the + * endpoints on the devices under that TT will appear in the TT structure. + */ +struct xhci_root_port_bw_info { + struct list_head tts; + unsigned int num_active_tts; + struct xhci_interval_bw_table bw_table; +}; + +struct xhci_tt_bw_info { + struct list_head tt_list; + int slot_id; + int ttport; + struct xhci_interval_bw_table bw_table; + int active_eps; }; @@ -1198,6 +1331,12 @@ struct s3_save { u64 erst_dequeue; }; +/* Use for lpm */ +struct dev_info { + u32 dev_id; + struct list_head list; +}; + struct xhci_bus_state { unsigned long bus_suspended; unsigned long next_statechange; @@ -1261,12 +1400,16 @@ struct xhci_hcd { struct xhci_erst erst; /* Scratchpad */ struct xhci_scratchpad *scratchpad; + /* Store LPM test failed devices' information */ + struct list_head lpm_failed_devs; /* slot enabling and address device helpers */ struct completion addr_dev; int slot_id; /* Internal mirror of the HW's dcbaa */ struct xhci_virt_device *devs[MAX_HC_SLOTS]; + /* For keeping track of bandwidth domains per roothub. */ + struct xhci_root_port_bw_info *rh_bw; /* DMA pools */ struct dma_pool *device_pool; @@ -1318,6 +1461,8 @@ struct xhci_hcd { #define XHCI_EP_LIMIT_QUIRK (1 << 5) #define XHCI_BROKEN_MSI (1 << 6) #define XHCI_RESET_ON_RESUME (1 << 7) +#define XHCI_SW_BW_CHECKING (1 << 8) +#define XHCI_AMD_0x96_HOST (1 << 9) unsigned int num_active_eps; unsigned int limit_active_eps; /* There are two roothubs to keep track of bus suspend info for */ @@ -1330,6 +1475,10 @@ struct xhci_hcd { /* Array of pointers to USB 2.0 PORTSC registers */ __le32 __iomem **usb2_ports; unsigned int num_usb2_ports; + /* support xHCI 0.96 spec USB2 software LPM */ + unsigned sw_lpm_support:1; + /* support xHCI 1.0 spec USB2 hardware LPM */ + unsigned hw_lpm_support:1; }; /* convert between an HCD pointer and the corresponding EHCI_HCD */ @@ -1401,9 +1550,7 @@ static inline void xhci_write_64(struct xhci_hcd *xhci, static inline int xhci_link_trb_quirk(struct xhci_hcd *xhci) { - u32 temp = xhci_readl(xhci, &xhci->cap_regs->hc_capbase); - return ((HC_VERSION(temp) == 0x95) && - (xhci->quirks & XHCI_LINK_TRB_QUIRK)); + return xhci->quirks & XHCI_LINK_TRB_QUIRK; } /* xHCI debugging */ @@ -1438,6 +1585,20 @@ unsigned int xhci_get_endpoint_flag(struct usb_endpoint_descriptor *desc); unsigned int xhci_get_endpoint_flag_from_index(unsigned int ep_index); unsigned int xhci_last_valid_endpoint(u32 added_ctxs); void xhci_endpoint_zero(struct xhci_hcd *xhci, struct xhci_virt_device *virt_dev, struct usb_host_endpoint *ep); +void xhci_drop_ep_from_interval_table(struct xhci_hcd *xhci, + struct xhci_bw_info *ep_bw, + struct xhci_interval_bw_table *bw_table, + struct usb_device *udev, + struct xhci_virt_ep *virt_ep, + struct xhci_tt_bw_info *tt_info); +void xhci_update_tt_active_eps(struct xhci_hcd *xhci, + struct xhci_virt_device *virt_dev, + int old_active_eps); +void xhci_clear_endpoint_bw_info(struct xhci_bw_info *bw_info); +void xhci_update_bw_info(struct xhci_hcd *xhci, + struct xhci_container_ctx *in_ctx, + struct xhci_input_control_ctx *ctrl_ctx, + struct xhci_virt_device *virt_dev); void xhci_endpoint_copy(struct xhci_hcd *xhci, struct xhci_container_ctx *in_ctx, struct xhci_container_ctx *out_ctx, @@ -1483,9 +1644,13 @@ void xhci_free_command(struct xhci_hcd *xhci, /* xHCI PCI glue */ int xhci_register_pci(void); void xhci_unregister_pci(void); +#else +static inline int xhci_register_pci(void) { return 0; } +static inline void xhci_unregister_pci(void) {} #endif /* xHCI host controller glue */ +typedef void (*xhci_get_quirks_t)(struct device *, struct xhci_hcd *); void xhci_quiesce(struct xhci_hcd *xhci); int xhci_halt(struct xhci_hcd *xhci); int xhci_reset(struct xhci_hcd *xhci); @@ -1493,6 +1658,7 @@ int xhci_init(struct usb_hcd *hcd); int xhci_run(struct usb_hcd *hcd); void xhci_stop(struct usb_hcd *hcd); void xhci_shutdown(struct usb_hcd *hcd); +int xhci_gen_setup(struct usb_hcd *hcd, xhci_get_quirks_t get_quirks); #ifdef CONFIG_PM int xhci_suspend(struct xhci_hcd *xhci); @@ -1507,6 +1673,10 @@ irqreturn_t xhci_irq(struct usb_hcd *hcd); irqreturn_t xhci_msi_irq(int irq, struct usb_hcd *hcd); int xhci_alloc_dev(struct usb_hcd *hcd, struct usb_device *udev); void xhci_free_dev(struct usb_hcd *hcd, struct usb_device *udev); +int xhci_alloc_tt_info(struct xhci_hcd *xhci, + struct xhci_virt_device *virt_dev, + struct usb_device *hdev, + struct usb_tt *tt, gfp_t mem_flags); int xhci_alloc_streams(struct usb_hcd *hcd, struct usb_device *udev, struct usb_host_endpoint **eps, unsigned int num_eps, unsigned int num_streams, gfp_t mem_flags); @@ -1514,6 +1684,9 @@ int xhci_free_streams(struct usb_hcd *hcd, struct usb_device *udev, struct usb_host_endpoint **eps, unsigned int num_eps, gfp_t mem_flags); int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev); +int xhci_update_device(struct usb_hcd *hcd, struct usb_device *udev); +int xhci_set_usb2_hardware_lpm(struct usb_hcd *hcd, + struct usb_device *udev, int enable); int xhci_update_hub_device(struct usb_hcd *hcd, struct usb_device *hdev, struct usb_tt *tt, gfp_t mem_flags); int xhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags); @@ -1572,6 +1745,10 @@ void xhci_ring_ep_doorbell(struct xhci_hcd *xhci, unsigned int slot_id, unsigned int ep_index, unsigned int stream_id); /* xHCI roothub code */ +void xhci_set_link_state(struct xhci_hcd *xhci, __le32 __iomem **port_array, + int port_id, u32 link_state); +void xhci_test_and_clear_bit(struct xhci_hcd *xhci, __le32 __iomem **port_array, + int port_id, u32 port_bit); int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, u16 wIndex, char *buf, u16 wLength); int xhci_hub_status_data(struct usb_hcd *hcd, char *buf); diff --git a/drivers/usb/misc/adutux.c b/drivers/usb/misc/adutux.c index a6afd15f6a46..fe858711651c 100644 --- a/drivers/usb/misc/adutux.c +++ b/drivers/usb/misc/adutux.c @@ -213,7 +213,7 @@ static void adu_interrupt_in_callback(struct urb *urb) if (urb->actual_length > 0 && dev->interrupt_in_buffer[0] != 0x00) { if (dev->read_buffer_length < - (4 * le16_to_cpu(dev->interrupt_in_endpoint->wMaxPacketSize)) - + (4 * usb_endpoint_maxp(dev->interrupt_in_endpoint)) - (urb->actual_length)) { memcpy (dev->read_buffer_primary + dev->read_buffer_length, @@ -315,7 +315,7 @@ static int adu_open(struct inode *inode, struct file *file) usb_rcvintpipe(dev->udev, dev->interrupt_in_endpoint->bEndpointAddress), dev->interrupt_in_buffer, - le16_to_cpu(dev->interrupt_in_endpoint->wMaxPacketSize), + usb_endpoint_maxp(dev->interrupt_in_endpoint), adu_interrupt_in_callback, dev, dev->interrupt_in_endpoint->bInterval); dev->read_urb_finished = 0; @@ -483,7 +483,7 @@ static ssize_t adu_read(struct file *file, __user char *buffer, size_t count, usb_rcvintpipe(dev->udev, dev->interrupt_in_endpoint->bEndpointAddress), dev->interrupt_in_buffer, - le16_to_cpu(dev->interrupt_in_endpoint->wMaxPacketSize), + usb_endpoint_maxp(dev->interrupt_in_endpoint), adu_interrupt_in_callback, dev, dev->interrupt_in_endpoint->bInterval); @@ -536,7 +536,7 @@ static ssize_t adu_read(struct file *file, __user char *buffer, size_t count, usb_rcvintpipe(dev->udev, dev->interrupt_in_endpoint->bEndpointAddress), dev->interrupt_in_buffer, - le16_to_cpu(dev->interrupt_in_endpoint->wMaxPacketSize), + usb_endpoint_maxp(dev->interrupt_in_endpoint), adu_interrupt_in_callback, dev, dev->interrupt_in_endpoint->bInterval); @@ -622,7 +622,7 @@ static ssize_t adu_write(struct file *file, const __user char *buffer, dbg(4," %s : sending, count = %Zd", __func__, count); /* write the data into interrupt_out_buffer from userspace */ - buffer_size = le16_to_cpu(dev->interrupt_out_endpoint->wMaxPacketSize); + buffer_size = usb_endpoint_maxp(dev->interrupt_out_endpoint); bytes_to_write = count > buffer_size ? buffer_size : count; dbg(4," %s : buffer_size = %Zd, count = %Zd, bytes_to_write = %Zd", __func__, buffer_size, count, bytes_to_write); @@ -752,8 +752,8 @@ static int adu_probe(struct usb_interface *interface, goto error; } - in_end_size = le16_to_cpu(dev->interrupt_in_endpoint->wMaxPacketSize); - out_end_size = le16_to_cpu(dev->interrupt_out_endpoint->wMaxPacketSize); + in_end_size = usb_endpoint_maxp(dev->interrupt_in_endpoint); + out_end_size = usb_endpoint_maxp(dev->interrupt_out_endpoint); dev->read_buffer_primary = kmalloc((4 * in_end_size), GFP_KERNEL); if (!dev->read_buffer_primary) { diff --git a/drivers/usb/misc/ftdi-elan.c b/drivers/usb/misc/ftdi-elan.c index 2f41089cd854..2dbe600fbc11 100644 --- a/drivers/usb/misc/ftdi-elan.c +++ b/drivers/usb/misc/ftdi-elan.c @@ -2777,7 +2777,7 @@ static int ftdi_elan_probe(struct usb_interface *interface, endpoint = &iface_desc->endpoint[i].desc; if (!ftdi->bulk_in_endpointAddr && usb_endpoint_is_bulk_in(endpoint)) { - buffer_size = le16_to_cpu(endpoint->wMaxPacketSize); + buffer_size = usb_endpoint_maxp(endpoint); ftdi->bulk_in_size = buffer_size; ftdi->bulk_in_endpointAddr = endpoint->bEndpointAddress; ftdi->bulk_in_buffer = kmalloc(buffer_size, GFP_KERNEL); diff --git a/drivers/usb/misc/idmouse.c b/drivers/usb/misc/idmouse.c index c6184b4d1695..515b67fffab1 100644 --- a/drivers/usb/misc/idmouse.c +++ b/drivers/usb/misc/idmouse.c @@ -359,7 +359,7 @@ static int idmouse_probe(struct usb_interface *interface, endpoint = &iface_desc->endpoint[0].desc; if (!dev->bulk_in_endpointAddr && usb_endpoint_is_bulk_in(endpoint)) { /* we found a bulk in endpoint */ - dev->orig_bi_size = le16_to_cpu(endpoint->wMaxPacketSize); + dev->orig_bi_size = usb_endpoint_maxp(endpoint); dev->bulk_in_size = 0x200; /* works _much_ faster */ dev->bulk_in_endpointAddr = endpoint->bEndpointAddress; dev->bulk_in_buffer = diff --git a/drivers/usb/misc/iowarrior.c b/drivers/usb/misc/iowarrior.c index a2190b983f52..81457904d6ba 100644 --- a/drivers/usb/misc/iowarrior.c +++ b/drivers/usb/misc/iowarrior.c @@ -803,7 +803,7 @@ static int iowarrior_probe(struct usb_interface *interface, dev->int_out_endpoint = endpoint; } /* we have to check the report_size often, so remember it in the endianess suitable for our machine */ - dev->report_size = le16_to_cpu(dev->int_in_endpoint->wMaxPacketSize); + dev->report_size = usb_endpoint_maxp(dev->int_in_endpoint); if ((dev->interface->cur_altsetting->desc.bInterfaceNumber == 0) && (dev->product_id == USB_DEVICE_ID_CODEMERCS_IOW56)) /* IOWarrior56 has wMaxPacketSize different from report size */ diff --git a/drivers/usb/misc/ldusb.c b/drivers/usb/misc/ldusb.c index cb4096201e29..48c166f0d764 100644 --- a/drivers/usb/misc/ldusb.c +++ b/drivers/usb/misc/ldusb.c @@ -721,7 +721,7 @@ static int ld_usb_probe(struct usb_interface *intf, const struct usb_device_id * if (dev->interrupt_out_endpoint == NULL) dev_warn(&intf->dev, "Interrupt out endpoint not found (using control endpoint instead)\n"); - dev->interrupt_in_endpoint_size = le16_to_cpu(dev->interrupt_in_endpoint->wMaxPacketSize); + dev->interrupt_in_endpoint_size = usb_endpoint_maxp(dev->interrupt_in_endpoint); dev->ring_buffer = kmalloc(ring_buffer_size*(sizeof(size_t)+dev->interrupt_in_endpoint_size), GFP_KERNEL); if (!dev->ring_buffer) { dev_err(&intf->dev, "Couldn't allocate ring_buffer\n"); @@ -737,7 +737,7 @@ static int ld_usb_probe(struct usb_interface *intf, const struct usb_device_id * dev_err(&intf->dev, "Couldn't allocate interrupt_in_urb\n"); goto error; } - dev->interrupt_out_endpoint_size = dev->interrupt_out_endpoint ? le16_to_cpu(dev->interrupt_out_endpoint->wMaxPacketSize) : + dev->interrupt_out_endpoint_size = dev->interrupt_out_endpoint ? usb_endpoint_maxp(dev->interrupt_out_endpoint) : udev->descriptor.bMaxPacketSize0; dev->interrupt_out_buffer = kmalloc(write_buffer_size*dev->interrupt_out_endpoint_size, GFP_KERNEL); if (!dev->interrupt_out_buffer) { diff --git a/drivers/usb/misc/legousbtower.c b/drivers/usb/misc/legousbtower.c index 6482c6e2e6bd..a989356f693e 100644 --- a/drivers/usb/misc/legousbtower.c +++ b/drivers/usb/misc/legousbtower.c @@ -409,7 +409,7 @@ static int tower_open (struct inode *inode, struct file *file) dev->udev, usb_rcvintpipe(dev->udev, dev->interrupt_in_endpoint->bEndpointAddress), dev->interrupt_in_buffer, - le16_to_cpu(dev->interrupt_in_endpoint->wMaxPacketSize), + usb_endpoint_maxp(dev->interrupt_in_endpoint), tower_interrupt_in_callback, dev, dev->interrupt_in_interval); @@ -928,7 +928,7 @@ static int tower_probe (struct usb_interface *interface, const struct usb_device err("Couldn't allocate read_buffer"); goto error; } - dev->interrupt_in_buffer = kmalloc (le16_to_cpu(dev->interrupt_in_endpoint->wMaxPacketSize), GFP_KERNEL); + dev->interrupt_in_buffer = kmalloc (usb_endpoint_maxp(dev->interrupt_in_endpoint), GFP_KERNEL); if (!dev->interrupt_in_buffer) { err("Couldn't allocate interrupt_in_buffer"); goto error; diff --git a/drivers/usb/misc/usblcd.c b/drivers/usb/misc/usblcd.c index 51648154bb44..1871cdf10da3 100644 --- a/drivers/usb/misc/usblcd.c +++ b/drivers/usb/misc/usblcd.c @@ -18,7 +18,7 @@ #include <linux/slab.h> #include <linux/errno.h> #include <linux/mutex.h> -#include <asm/uaccess.h> +#include <linux/uaccess.h> #include <linux/usb.h> #define DRIVER_VERSION "USBLCD Driver Version 1.05" @@ -34,22 +34,29 @@ static const struct usb_device_id id_table[] = { { .idVendor = 0x10D2, .match_flags = USB_DEVICE_ID_MATCH_VENDOR, }, { }, }; -MODULE_DEVICE_TABLE (usb, id_table); +MODULE_DEVICE_TABLE(usb, id_table); static DEFINE_MUTEX(open_disc_mutex); struct usb_lcd { - struct usb_device * udev; /* init: probe_lcd */ - struct usb_interface * interface; /* the interface for this device */ - unsigned char * bulk_in_buffer; /* the buffer to receive data */ - size_t bulk_in_size; /* the size of the receive buffer */ - __u8 bulk_in_endpointAddr; /* the address of the bulk in endpoint */ - __u8 bulk_out_endpointAddr; /* the address of the bulk out endpoint */ + struct usb_device *udev; /* init: probe_lcd */ + struct usb_interface *interface; /* the interface for + this device */ + unsigned char *bulk_in_buffer; /* the buffer to receive + data */ + size_t bulk_in_size; /* the size of the + receive buffer */ + __u8 bulk_in_endpointAddr; /* the address of the + bulk in endpoint */ + __u8 bulk_out_endpointAddr; /* the address of the + bulk out endpoint */ struct kref kref; - struct semaphore limit_sem; /* to stop writes at full throttle from - * using up all RAM */ - struct usb_anchor submitted; /* URBs to wait for before suspend */ + struct semaphore limit_sem; /* to stop writes at + full throttle from + using up all RAM */ + struct usb_anchor submitted; /* URBs to wait for + before suspend */ }; #define to_lcd_dev(d) container_of(d, struct usb_lcd, kref) @@ -63,8 +70,8 @@ static void lcd_delete(struct kref *kref) struct usb_lcd *dev = to_lcd_dev(kref); usb_put_dev(dev->udev); - kfree (dev->bulk_in_buffer); - kfree (dev); + kfree(dev->bulk_in_buffer); + kfree(dev); } @@ -80,7 +87,7 @@ static int lcd_open(struct inode *inode, struct file *file) interface = usb_find_interface(&lcd_driver, subminor); if (!interface) { mutex_unlock(&lcd_mutex); - err ("USBLCD: %s - error, can't find device for minor %d", + err("USBLCD: %s - error, can't find device for minor %d", __func__, subminor); return -ENODEV; } @@ -126,7 +133,8 @@ static int lcd_release(struct inode *inode, struct file *file) return 0; } -static ssize_t lcd_read(struct file *file, char __user * buffer, size_t count, loff_t *ppos) +static ssize_t lcd_read(struct file *file, char __user * buffer, + size_t count, loff_t *ppos) { struct usb_lcd *dev; int retval = 0; @@ -135,8 +143,9 @@ static ssize_t lcd_read(struct file *file, char __user * buffer, size_t count, l dev = file->private_data; /* do a blocking bulk read to get data from the device */ - retval = usb_bulk_msg(dev->udev, - usb_rcvbulkpipe(dev->udev, dev->bulk_in_endpointAddr), + retval = usb_bulk_msg(dev->udev, + usb_rcvbulkpipe(dev->udev, + dev->bulk_in_endpointAddr), dev->bulk_in_buffer, min(dev->bulk_in_size, count), &bytes_read, 10000); @@ -161,23 +170,23 @@ static long lcd_ioctl(struct file *file, unsigned int cmd, unsigned long arg) dev = file->private_data; if (dev == NULL) return -ENODEV; - + switch (cmd) { case IOCTL_GET_HARD_VERSION: mutex_lock(&lcd_mutex); bcdDevice = le16_to_cpu((dev->udev)->descriptor.bcdDevice); - sprintf(buf,"%1d%1d.%1d%1d", + sprintf(buf, "%1d%1d.%1d%1d", (bcdDevice & 0xF000)>>12, (bcdDevice & 0xF00)>>8, (bcdDevice & 0xF0)>>4, (bcdDevice & 0xF)); mutex_unlock(&lcd_mutex); - if (copy_to_user((void __user *)arg,buf,strlen(buf))!=0) + if (copy_to_user((void __user *)arg, buf, strlen(buf)) != 0) return -EFAULT; break; case IOCTL_GET_DRV_VERSION: - sprintf(buf,DRIVER_VERSION); - if (copy_to_user((void __user *)arg,buf,strlen(buf))!=0) + sprintf(buf, DRIVER_VERSION); + if (copy_to_user((void __user *)arg, buf, strlen(buf)) != 0) return -EFAULT; break; default: @@ -199,7 +208,7 @@ static void lcd_write_bulk_callback(struct urb *urb) if (status && !(status == -ENOENT || status == -ECONNRESET || - status == -ESHUTDOWN)) { + status == -ESHUTDOWN)) { dbg("USBLCD: %s - nonzero write bulk status received: %d", __func__, status); } @@ -210,15 +219,16 @@ static void lcd_write_bulk_callback(struct urb *urb) up(&dev->limit_sem); } -static ssize_t lcd_write(struct file *file, const char __user * user_buffer, size_t count, loff_t *ppos) +static ssize_t lcd_write(struct file *file, const char __user * user_buffer, + size_t count, loff_t *ppos) { struct usb_lcd *dev; - int retval = 0, r; + int retval = 0, r; struct urb *urb = NULL; char *buf = NULL; - + dev = file->private_data; - + /* verify that we actually have some data to write */ if (count == 0) goto exit; @@ -233,34 +243,38 @@ static ssize_t lcd_write(struct file *file, const char __user * user_buffer, siz retval = -ENOMEM; goto err_no_buf; } - - buf = usb_alloc_coherent(dev->udev, count, GFP_KERNEL, &urb->transfer_dma); + + buf = usb_alloc_coherent(dev->udev, count, GFP_KERNEL, + &urb->transfer_dma); if (!buf) { retval = -ENOMEM; goto error; } - + if (copy_from_user(buf, user_buffer, count)) { retval = -EFAULT; goto error; } - + /* initialize the urb properly */ usb_fill_bulk_urb(urb, dev->udev, - usb_sndbulkpipe(dev->udev, dev->bulk_out_endpointAddr), + usb_sndbulkpipe(dev->udev, + dev->bulk_out_endpointAddr), buf, count, lcd_write_bulk_callback, dev); urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; usb_anchor_urb(urb, &dev->submitted); - + /* send the data out the bulk port */ retval = usb_submit_urb(urb, GFP_KERNEL); if (retval) { - err("USBLCD: %s - failed submitting write urb, error %d", __func__, retval); + err("USBLCD: %s - failed submitting write urb, error %d", + __func__, retval); goto error_unanchor; } - - /* release our reference to this urb, the USB core will eventually free it entirely */ + + /* release our reference to this urb, + the USB core will eventually free it entirely */ usb_free_urb(urb); exit: @@ -276,13 +290,13 @@ err_no_buf: } static const struct file_operations lcd_fops = { - .owner = THIS_MODULE, - .read = lcd_read, - .write = lcd_write, - .open = lcd_open, + .owner = THIS_MODULE, + .read = lcd_read, + .write = lcd_write, + .open = lcd_open, .unlocked_ioctl = lcd_ioctl, - .release = lcd_release, - .llseek = noop_llseek, + .release = lcd_release, + .llseek = noop_llseek, }; /* @@ -290,12 +304,13 @@ static const struct file_operations lcd_fops = { * and to have the device registered with the driver core */ static struct usb_class_driver lcd_class = { - .name = "lcd%d", - .fops = &lcd_fops, - .minor_base = USBLCD_MINOR, + .name = "lcd%d", + .fops = &lcd_fops, + .minor_base = USBLCD_MINOR, }; -static int lcd_probe(struct usb_interface *interface, const struct usb_device_id *id) +static int lcd_probe(struct usb_interface *interface, + const struct usb_device_id *id) { struct usb_lcd *dev = NULL; struct usb_host_interface *iface_desc; @@ -322,7 +337,7 @@ static int lcd_probe(struct usb_interface *interface, const struct usb_device_id retval = -ENODEV; goto error; } - + /* set up the endpoint information */ /* use only the first bulk-in and bulk-out endpoints */ iface_desc = interface->cur_altsetting; @@ -332,7 +347,7 @@ static int lcd_probe(struct usb_interface *interface, const struct usb_device_id if (!dev->bulk_in_endpointAddr && usb_endpoint_is_bulk_in(endpoint)) { /* we found a bulk in endpoint */ - buffer_size = le16_to_cpu(endpoint->wMaxPacketSize); + buffer_size = usb_endpoint_maxp(endpoint); dev->bulk_in_size = buffer_size; dev->bulk_in_endpointAddr = endpoint->bEndpointAddress; dev->bulk_in_buffer = kmalloc(buffer_size, GFP_KERNEL); @@ -369,7 +384,7 @@ static int lcd_probe(struct usb_interface *interface, const struct usb_device_id dev_info(&interface->dev, "USBLCD Version %1d%1d.%1d%1d found " "at address %d\n", (i & 0xF000)>>12, (i & 0xF00)>>8, - (i & 0xF0)>>4,(i & 0xF), dev->udev->devnum); + (i & 0xF0)>>4, (i & 0xF), dev->udev->devnum); /* let the user know what node this device is now attached to */ dev_info(&interface->dev, "USB LCD device now attached to USBLCD-%d\n", @@ -401,7 +416,7 @@ static int lcd_suspend(struct usb_interface *intf, pm_message_t message) return 0; } -static int lcd_resume (struct usb_interface *intf) +static int lcd_resume(struct usb_interface *intf) { return 0; } @@ -409,16 +424,16 @@ static int lcd_resume (struct usb_interface *intf) static void lcd_disconnect(struct usb_interface *interface) { struct usb_lcd *dev; - int minor = interface->minor; + int minor = interface->minor; mutex_lock(&open_disc_mutex); - dev = usb_get_intfdata(interface); - usb_set_intfdata(interface, NULL); + dev = usb_get_intfdata(interface); + usb_set_intfdata(interface, NULL); mutex_unlock(&open_disc_mutex); - /* give back our minor */ - usb_deregister_dev(interface, &lcd_class); - + /* give back our minor */ + usb_deregister_dev(interface, &lcd_class); + /* decrement our usage count */ kref_put(&dev->kref, lcd_delete); @@ -438,7 +453,7 @@ static struct usb_driver lcd_driver = { static int __init usb_lcd_init(void) { int result; - + result = usb_register(&lcd_driver); if (result) err("usb_register failed. Error number %d", result); diff --git a/drivers/usb/misc/usbled.c b/drivers/usb/misc/usbled.c index 1616ad1793a4..43f84e50d514 100644 --- a/drivers/usb/misc/usbled.c +++ b/drivers/usb/misc/usbled.c @@ -33,10 +33,10 @@ static const struct usb_device_id id_table[] = { .driver_info = DREAM_CHEEKY_WEBMAIL_NOTIFIER }, { }, }; -MODULE_DEVICE_TABLE (usb, id_table); +MODULE_DEVICE_TABLE(usb, id_table); struct usb_led { - struct usb_device * udev; + struct usb_device *udev; unsigned char blue; unsigned char red; unsigned char green; @@ -113,14 +113,16 @@ static void change_color(struct usb_led *led) } #define show_set(value) \ -static ssize_t show_##value(struct device *dev, struct device_attribute *attr, char *buf) \ +static ssize_t show_##value(struct device *dev, struct device_attribute *attr,\ + char *buf) \ { \ struct usb_interface *intf = to_usb_interface(dev); \ struct usb_led *led = usb_get_intfdata(intf); \ \ return sprintf(buf, "%d\n", led->value); \ } \ -static ssize_t set_##value(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) \ +static ssize_t set_##value(struct device *dev, struct device_attribute *attr,\ + const char *buf, size_t count) \ { \ struct usb_interface *intf = to_usb_interface(dev); \ struct usb_led *led = usb_get_intfdata(intf); \ @@ -135,7 +137,8 @@ show_set(blue); show_set(red); show_set(green); -static int led_probe(struct usb_interface *interface, const struct usb_device_id *id) +static int led_probe(struct usb_interface *interface, + const struct usb_device_id *id) { struct usb_device *udev = interface_to_usbdev(interface); struct usb_led *dev = NULL; @@ -150,7 +153,7 @@ static int led_probe(struct usb_interface *interface, const struct usb_device_id dev->udev = usb_get_dev(udev); dev->type = id->driver_info; - usb_set_intfdata (interface, dev); + usb_set_intfdata(interface, dev); retval = device_create_file(&interface->dev, &dev_attr_blue); if (retval) @@ -194,7 +197,7 @@ error: device_remove_file(&interface->dev, &dev_attr_blue); device_remove_file(&interface->dev, &dev_attr_red); device_remove_file(&interface->dev, &dev_attr_green); - usb_set_intfdata (interface, NULL); + usb_set_intfdata(interface, NULL); usb_put_dev(dev->udev); kfree(dev); error_mem: @@ -205,14 +208,14 @@ static void led_disconnect(struct usb_interface *interface) { struct usb_led *dev; - dev = usb_get_intfdata (interface); + dev = usb_get_intfdata(interface); device_remove_file(&interface->dev, &dev_attr_blue); device_remove_file(&interface->dev, &dev_attr_red); device_remove_file(&interface->dev, &dev_attr_green); /* first remove the files, then set the pointer to NULL */ - usb_set_intfdata (interface, NULL); + usb_set_intfdata(interface, NULL); usb_put_dev(dev->udev); @@ -243,8 +246,8 @@ static void __exit usb_led_exit(void) usb_deregister(&led_driver); } -module_init (usb_led_init); -module_exit (usb_led_exit); +module_init(usb_led_init); +module_exit(usb_led_exit); MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_DESC); diff --git a/drivers/usb/misc/usbtest.c b/drivers/usb/misc/usbtest.c index bb10846affc3..bd6d00802eab 100644 --- a/drivers/usb/misc/usbtest.c +++ b/drivers/usb/misc/usbtest.c @@ -359,8 +359,10 @@ static int simple_io( urb->context = &completion; while (retval == 0 && iterations-- > 0) { init_completion(&completion); - if (usb_pipeout(urb->pipe)) + if (usb_pipeout(urb->pipe)) { simple_fill_buf(urb); + urb->transfer_flags |= URB_ZERO_PACKET; + } retval = usb_submit_urb(urb, GFP_KERNEL); if (retval != 0) break; @@ -1583,8 +1585,8 @@ static struct urb *iso_alloc_urb( if (bytes < 0 || !desc) return NULL; - maxp = 0x7ff & le16_to_cpu(desc->wMaxPacketSize); - maxp *= 1 + (0x3 & (le16_to_cpu(desc->wMaxPacketSize) >> 11)); + maxp = 0x7ff & usb_endpoint_maxp(desc); + maxp *= 1 + (0x3 & (usb_endpoint_maxp(desc) >> 11)); packets = DIV_ROUND_UP(bytes, maxp); urb = usb_alloc_urb(packets, GFP_KERNEL); @@ -1654,7 +1656,7 @@ test_iso_queue(struct usbtest_dev *dev, struct usbtest_param *param, "... iso period %d %sframes, wMaxPacket %04x\n", 1 << (desc->bInterval - 1), (udev->speed == USB_SPEED_HIGH) ? "micro" : "", - le16_to_cpu(desc->wMaxPacketSize)); + usb_endpoint_maxp(desc)); for (i = 0; i < param->sglen; i++) { urbs[i] = iso_alloc_urb(udev, pipe, desc, @@ -2298,25 +2300,8 @@ usbtest_probe(struct usb_interface *intf, const struct usb_device_id *id) usb_set_intfdata(intf, dev); dev_info(&intf->dev, "%s\n", info->name); - dev_info(&intf->dev, "%s speed {control%s%s%s%s%s} tests%s\n", - ({ char *tmp; - switch (udev->speed) { - case USB_SPEED_LOW: - tmp = "low"; - break; - case USB_SPEED_FULL: - tmp = "full"; - break; - case USB_SPEED_HIGH: - tmp = "high"; - break; - case USB_SPEED_SUPER: - tmp = "super"; - break; - default: - tmp = "unknown"; - break; - }; tmp; }), + dev_info(&intf->dev, "%s {control%s%s%s%s%s} tests%s\n", + usb_speed_string(udev->speed), info->ctrl_out ? " in/out" : "", rtest, wtest, irtest, iwtest, diff --git a/drivers/usb/mon/mon_bin.c b/drivers/usb/mon/mon_bin.c index a09dbd243eb3..a04b2ff9dd83 100644 --- a/drivers/usb/mon/mon_bin.c +++ b/drivers/usb/mon/mon_bin.c @@ -1101,7 +1101,7 @@ static long mon_bin_ioctl(struct file *file, unsigned int cmd, unsigned long arg nevents = mon_bin_queued(rp); sp = (struct mon_bin_stats __user *)arg; - if (put_user(rp->cnt_lost, &sp->dropped)) + if (put_user(ndropped, &sp->dropped)) return -EFAULT; if (put_user(nevents, &sp->queued)) return -EFAULT; diff --git a/drivers/usb/musb/blackfin.c b/drivers/usb/musb/blackfin.c index ae8c39617743..5e7cfba5b079 100644 --- a/drivers/usb/musb/blackfin.c +++ b/drivers/usb/musb/blackfin.c @@ -17,6 +17,7 @@ #include <linux/io.h> #include <linux/platform_device.h> #include <linux/dma-mapping.h> +#include <linux/prefetch.h> #include <asm/cacheflush.h> diff --git a/drivers/usb/musb/cppi_dma.c b/drivers/usb/musb/cppi_dma.c index 149f3f310a0a..318fb4e8a885 100644 --- a/drivers/usb/musb/cppi_dma.c +++ b/drivers/usb/musb/cppi_dma.c @@ -226,8 +226,10 @@ static int cppi_controller_stop(struct dma_controller *c) struct cppi *controller; void __iomem *tibase; int i; + struct musb *musb; controller = container_of(c, struct cppi, controller); + musb = controller->musb; tibase = controller->tibase; /* DISABLE INDIVIDUAL CHANNEL Interrupts */ @@ -289,9 +291,11 @@ cppi_channel_allocate(struct dma_controller *c, u8 index; struct cppi_channel *cppi_ch; void __iomem *tibase; + struct musb *musb; controller = container_of(c, struct cppi, controller); tibase = controller->tibase; + musb = controller->musb; /* ep0 doesn't use DMA; remember cppi indices are 0..N-1 */ index = ep->epnum - 1; @@ -339,7 +343,8 @@ static void cppi_channel_release(struct dma_channel *channel) c = container_of(channel, struct cppi_channel, channel); tibase = c->controller->tibase; if (!c->hw_ep) - dev_dbg(musb->controller, "releasing idle DMA channel %p\n", c); + dev_dbg(c->controller->musb->controller, + "releasing idle DMA channel %p\n", c); else if (!c->transmit) core_rxirq_enable(tibase, c->index + 1); @@ -357,10 +362,11 @@ cppi_dump_rx(int level, struct cppi_channel *c, const char *tag) musb_ep_select(base, c->index + 1); - DBG(level, "RX DMA%d%s: %d left, csr %04x, " - "%08x H%08x S%08x C%08x, " - "B%08x L%08x %08x .. %08x" - "\n", + dev_dbg(c->controller->musb->controller, + "RX DMA%d%s: %d left, csr %04x, " + "%08x H%08x S%08x C%08x, " + "B%08x L%08x %08x .. %08x" + "\n", c->index, tag, musb_readl(c->controller->tibase, DAVINCI_RXCPPI_BUFCNT0_REG + 4 * c->index), @@ -387,10 +393,11 @@ cppi_dump_tx(int level, struct cppi_channel *c, const char *tag) musb_ep_select(base, c->index + 1); - DBG(level, "TX DMA%d%s: csr %04x, " - "H%08x S%08x C%08x %08x, " - "F%08x L%08x .. %08x" - "\n", + dev_dbg(c->controller->musb->controller, + "TX DMA%d%s: csr %04x, " + "H%08x S%08x C%08x %08x, " + "F%08x L%08x .. %08x" + "\n", c->index, tag, musb_readw(c->hw_ep->regs, MUSB_TXCSR), @@ -1022,6 +1029,7 @@ static bool cppi_rx_scan(struct cppi *cppi, unsigned ch) int i; dma_addr_t safe2ack; void __iomem *regs = rx->hw_ep->regs; + struct musb *musb = cppi->musb; cppi_dump_rx(6, rx, "/K"); diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c index 8bdf25a8b023..f9a3f62a83b5 100644 --- a/drivers/usb/musb/davinci.c +++ b/drivers/usb/musb/davinci.c @@ -35,7 +35,7 @@ #include <mach/hardware.h> #include <mach/memory.h> -#include <mach/gpio.h> +#include <asm/gpio.h> #include <mach/cputype.h> #include <asm/mach-types.h> diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h index 668eeef601ae..b3c065ab9dbc 100644 --- a/drivers/usb/musb/musb_core.h +++ b/drivers/usb/musb/musb_core.h @@ -172,7 +172,8 @@ enum musb_g_ep0_state { #endif /* TUSB mapping: "flat" plus ep0 special cases */ -#if defined(CONFIG_USB_MUSB_TUSB6010) +#if defined(CONFIG_USB_MUSB_TUSB6010) || \ + defined(CONFIG_USB_MUSB_TUSB6010_MODULE) #define musb_ep_select(_mbase, _epnum) \ musb_writeb((_mbase), MUSB_INDEX, (_epnum)) #define MUSB_EP_OFFSET MUSB_TUSB_OFFSET @@ -241,7 +242,8 @@ struct musb_hw_ep { void __iomem *fifo; void __iomem *regs; -#ifdef CONFIG_USB_MUSB_TUSB6010 +#if defined(CONFIG_USB_MUSB_TUSB6010) || \ + defined(CONFIG_USB_MUSB_TUSB6010_MODULE) void __iomem *conf; #endif @@ -258,7 +260,8 @@ struct musb_hw_ep { struct dma_channel *tx_channel; struct dma_channel *rx_channel; -#ifdef CONFIG_USB_MUSB_TUSB6010 +#if defined(CONFIG_USB_MUSB_TUSB6010) || \ + defined(CONFIG_USB_MUSB_TUSB6010_MODULE) /* TUSB has "asynchronous" and "synchronous" dma modes */ dma_addr_t fifo_async; dma_addr_t fifo_sync; @@ -356,7 +359,8 @@ struct musb { void __iomem *ctrl_base; void __iomem *mregs; -#ifdef CONFIG_USB_MUSB_TUSB6010 +#if defined(CONFIG_USB_MUSB_TUSB6010) || \ + defined(CONFIG_USB_MUSB_TUSB6010_MODULE) dma_addr_t async; dma_addr_t sync; void __iomem *sync_va; diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c index 8c41a2e6ea77..ae4a20acef6c 100644 --- a/drivers/usb/musb/musb_gadget.c +++ b/drivers/usb/musb/musb_gadget.c @@ -634,6 +634,7 @@ static void rxstate(struct musb *musb, struct musb_request *req) u16 len; u16 csr = musb_readw(epio, MUSB_RXCSR); struct musb_hw_ep *hw_ep = &musb->endpoints[epnum]; + u8 use_mode_1; if (hw_ep->is_shared_fifo) musb_ep = &hw_ep->ep_in; @@ -683,6 +684,18 @@ static void rxstate(struct musb *musb, struct musb_request *req) if (csr & MUSB_RXCSR_RXPKTRDY) { len = musb_readw(epio, MUSB_RXCOUNT); + + /* + * Enable Mode 1 on RX transfers only when short_not_ok flag + * is set. Currently short_not_ok flag is set only from + * file_storage and f_mass_storage drivers + */ + + if (request->short_not_ok && len == musb_ep->packet_sz) + use_mode_1 = 1; + else + use_mode_1 = 0; + if (request->actual < request->length) { #ifdef CONFIG_USB_INVENTRA_DMA if (is_buffer_mapped(req)) { @@ -704,7 +717,7 @@ static void rxstate(struct musb *musb, struct musb_request *req) * most these gadgets, end of is signified either by a short packet, * or filling the last byte of the buffer. (Sending extra data in * that last pckate should trigger an overflow fault.) But in mode 1, - * we don't get DMA completion interrrupt for short packets. + * we don't get DMA completion interrupt for short packets. * * Theoretically, we could enable DMAReq irq (MUSB_RXCSR_DMAMODE = 1), * to get endpoint interrupt on every DMA req, but that didn't seem @@ -714,37 +727,41 @@ static void rxstate(struct musb *musb, struct musb_request *req) * then becomes usable as a runtime "use mode 1" hint... */ - csr |= MUSB_RXCSR_DMAENAB; -#ifdef USE_MODE1 - csr |= MUSB_RXCSR_AUTOCLEAR; - /* csr |= MUSB_RXCSR_DMAMODE; */ - - /* this special sequence (enabling and then - * disabling MUSB_RXCSR_DMAMODE) is required - * to get DMAReq to activate - */ - musb_writew(epio, MUSB_RXCSR, - csr | MUSB_RXCSR_DMAMODE); -#else - if (!musb_ep->hb_mult && - musb_ep->hw_ep->rx_double_buffered) + /* Experimental: Mode1 works with mass storage use cases */ + if (use_mode_1) { csr |= MUSB_RXCSR_AUTOCLEAR; -#endif - musb_writew(epio, MUSB_RXCSR, csr); + musb_writew(epio, MUSB_RXCSR, csr); + csr |= MUSB_RXCSR_DMAENAB; + musb_writew(epio, MUSB_RXCSR, csr); + + /* + * this special sequence (enabling and then + * disabling MUSB_RXCSR_DMAMODE) is required + * to get DMAReq to activate + */ + musb_writew(epio, MUSB_RXCSR, + csr | MUSB_RXCSR_DMAMODE); + musb_writew(epio, MUSB_RXCSR, csr); + + } else { + if (!musb_ep->hb_mult && + musb_ep->hw_ep->rx_double_buffered) + csr |= MUSB_RXCSR_AUTOCLEAR; + csr |= MUSB_RXCSR_DMAENAB; + musb_writew(epio, MUSB_RXCSR, csr); + } if (request->actual < request->length) { int transfer_size = 0; -#ifdef USE_MODE1 - transfer_size = min(request->length - request->actual, - channel->max_len); -#else - transfer_size = min(request->length - request->actual, - (unsigned)len); -#endif - if (transfer_size <= musb_ep->packet_sz) - musb_ep->dma->desired_mode = 0; - else + if (use_mode_1) { + transfer_size = min(request->length - request->actual, + channel->max_len); musb_ep->dma->desired_mode = 1; + } else { + transfer_size = min(request->length - request->actual, + (unsigned)len); + musb_ep->dma->desired_mode = 0; + } use_dma = c->channel_program( channel, @@ -1020,7 +1037,7 @@ static int musb_gadget_enable(struct usb_ep *ep, goto fail; /* REVISIT this rules out high bandwidth periodic transfers */ - tmp = le16_to_cpu(desc->wMaxPacketSize); + tmp = usb_endpoint_maxp(desc); if (tmp & ~0x07ff) { int ok; @@ -1856,6 +1873,7 @@ int __init musb_gadget_setup(struct musb *musb) return 0; err: + musb->g.dev.parent = NULL; device_unregister(&musb->g.dev); return status; } @@ -1863,7 +1881,8 @@ err: void musb_gadget_cleanup(struct musb *musb) { usb_del_gadget_udc(&musb->g); - device_unregister(&musb->g.dev); + if (musb->g.dev.parent) + device_unregister(&musb->g.dev); } /* diff --git a/drivers/usb/musb/musb_gadget_ep0.c b/drivers/usb/musb/musb_gadget_ep0.c index 9378b359c1f0..6a0d0467ec74 100644 --- a/drivers/usb/musb/musb_gadget_ep0.c +++ b/drivers/usb/musb/musb_gadget_ep0.c @@ -679,6 +679,14 @@ irqreturn_t musb_g_ep0_irq(struct musb *musb) musb_readb(mbase, MUSB_FADDR), decode_ep0stage(musb->ep0_state)); + if (csr & MUSB_CSR0_P_DATAEND) { + /* + * If DATAEND is set we should not call the callback, + * hence the status stage is not complete. + */ + return IRQ_HANDLED; + } + /* I sent a stall.. need to acknowledge it now.. */ if (csr & MUSB_CSR0_P_SENTSTALL) { musb_writew(regs, MUSB_CSR0, diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c index 8b2473fa0f47..60ddba8066ea 100644 --- a/drivers/usb/musb/musb_host.c +++ b/drivers/usb/musb/musb_host.c @@ -1932,7 +1932,7 @@ static int musb_urb_enqueue( INIT_LIST_HEAD(&qh->ring); qh->is_ready = 1; - qh->maxpacket = le16_to_cpu(epd->wMaxPacketSize); + qh->maxpacket = usb_endpoint_maxp(epd); qh->type = usb_endpoint_type(epd); /* Bits 11 & 12 of wMaxPacketSize encode high bandwidth multiplier. diff --git a/drivers/usb/musb/musb_regs.h b/drivers/usb/musb/musb_regs.h index 82410703dcd3..03f2655af290 100644 --- a/drivers/usb/musb/musb_regs.h +++ b/drivers/usb/musb/musb_regs.h @@ -234,7 +234,8 @@ #define MUSB_TESTMODE 0x0F /* 8 bit */ /* Get offset for a given FIFO from musb->mregs */ -#ifdef CONFIG_USB_MUSB_TUSB6010 +#if defined(CONFIG_USB_MUSB_TUSB6010) || \ + defined(CONFIG_USB_MUSB_TUSB6010_MODULE) #define MUSB_FIFO_OFFSET(epnum) (0x200 + ((epnum) * 0x20)) #else #define MUSB_FIFO_OFFSET(epnum) (0x20 + ((epnum) * 4)) @@ -295,7 +296,8 @@ #define MUSB_FLAT_OFFSET(_epnum, _offset) \ (0x100 + (0x10*(_epnum)) + (_offset)) -#ifdef CONFIG_USB_MUSB_TUSB6010 +#if defined(CONFIG_USB_MUSB_TUSB6010) || \ + defined(CONFIG_USB_MUSB_TUSB6010_MODULE) /* TUSB6010 EP0 configuration register is special */ #define MUSB_TUSB_OFFSET(_epnum, _offset) \ (0x10 + _offset) diff --git a/drivers/usb/musb/musbhsdma.c b/drivers/usb/musb/musbhsdma.c index f70c5a577736..57a608584e16 100644 --- a/drivers/usb/musb/musbhsdma.c +++ b/drivers/usb/musb/musbhsdma.c @@ -408,7 +408,7 @@ dma_controller_create(struct musb *musb, void __iomem *base) controller->controller.channel_program = dma_channel_program; controller->controller.channel_abort = dma_channel_abort; - if (request_irq(irq, dma_controller_irq, IRQF_DISABLED, + if (request_irq(irq, dma_controller_irq, 0, dev_name(musb->controller), &controller->controller)) { dev_err(dev, "request_irq %d failed!\n", irq); dma_controller_destroy(&controller->controller); diff --git a/drivers/usb/musb/tusb6010.c b/drivers/usb/musb/tusb6010.c index 9eec41fbf3a4..ec1480191f78 100644 --- a/drivers/usb/musb/tusb6010.c +++ b/drivers/usb/musb/tusb6010.c @@ -18,6 +18,7 @@ #include <linux/kernel.h> #include <linux/errno.h> #include <linux/init.h> +#include <linux/prefetch.h> #include <linux/usb.h> #include <linux/irq.h> #include <linux/platform_device.h> diff --git a/drivers/usb/musb/tusb6010_omap.c b/drivers/usb/musb/tusb6010_omap.c index 07c8a73dfe41..b67b4bc596c1 100644 --- a/drivers/usb/musb/tusb6010_omap.c +++ b/drivers/usb/musb/tusb6010_omap.c @@ -20,6 +20,7 @@ #include <plat/mux.h> #include "musb_core.h" +#include "tusb6010.h" #define to_chdat(c) ((struct tusb_omap_dma_ch *)(c)->private_data) diff --git a/drivers/usb/musb/ux500_dma.c b/drivers/usb/musb/ux500_dma.c index cecace411832..ef4333f4bbe0 100644 --- a/drivers/usb/musb/ux500_dma.c +++ b/drivers/usb/musb/ux500_dma.c @@ -65,7 +65,8 @@ static void ux500_tx_work(struct work_struct *data) struct musb *musb = hw_ep->musb; unsigned long flags; - DBG(4, "DMA tx transfer done on hw_ep=%d\n", hw_ep->epnum); + dev_dbg(musb->controller, "DMA tx transfer done on hw_ep=%d\n", + hw_ep->epnum); spin_lock_irqsave(&musb->lock, flags); ux500_channel->channel.actual_len = ux500_channel->cur_len; @@ -84,7 +85,8 @@ static void ux500_rx_work(struct work_struct *data) struct musb *musb = hw_ep->musb; unsigned long flags; - DBG(4, "DMA rx transfer done on hw_ep=%d\n", hw_ep->epnum); + dev_dbg(musb->controller, "DMA rx transfer done on hw_ep=%d\n", + hw_ep->epnum); spin_lock_irqsave(&musb->lock, flags); ux500_channel->channel.actual_len = ux500_channel->cur_len; @@ -116,9 +118,11 @@ static bool ux500_configure_channel(struct dma_channel *channel, enum dma_slave_buswidth addr_width; dma_addr_t usb_fifo_addr = (MUSB_FIFO_OFFSET(hw_ep->epnum) + ux500_channel->controller->phy_base); + struct musb *musb = ux500_channel->controller->private_data; - DBG(4, "packet_sz=%d, mode=%d, dma_addr=0x%x, len=%d is_tx=%d\n", - packet_sz, mode, dma_addr, len, ux500_channel->is_tx); + dev_dbg(musb->controller, + "packet_sz=%d, mode=%d, dma_addr=0x%x, len=%d is_tx=%d\n", + packet_sz, mode, dma_addr, len, ux500_channel->is_tx); ux500_channel->cur_len = len; @@ -133,15 +137,13 @@ static bool ux500_configure_channel(struct dma_channel *channel, DMA_SLAVE_BUSWIDTH_4_BYTES; slave_conf.direction = direction; - if (direction == DMA_FROM_DEVICE) { - slave_conf.src_addr = usb_fifo_addr; - slave_conf.src_addr_width = addr_width; - slave_conf.src_maxburst = 16; - } else { - slave_conf.dst_addr = usb_fifo_addr; - slave_conf.dst_addr_width = addr_width; - slave_conf.dst_maxburst = 16; - } + slave_conf.src_addr = usb_fifo_addr; + slave_conf.src_addr_width = addr_width; + slave_conf.src_maxburst = 16; + slave_conf.dst_addr = usb_fifo_addr; + slave_conf.dst_addr_width = addr_width; + slave_conf.dst_maxburst = 16; + dma_chan->device->device_control(dma_chan, DMA_SLAVE_CONFIG, (unsigned long) &slave_conf); @@ -166,6 +168,7 @@ static struct dma_channel *ux500_dma_channel_allocate(struct dma_controller *c, struct ux500_dma_controller *controller = container_of(c, struct ux500_dma_controller, controller); struct ux500_dma_channel *ux500_channel = NULL; + struct musb *musb = controller->private_data; u8 ch_num = hw_ep->epnum - 1; u32 max_ch; @@ -192,7 +195,7 @@ static struct dma_channel *ux500_dma_channel_allocate(struct dma_controller *c, ux500_channel->hw_ep = hw_ep; ux500_channel->is_allocated = 1; - DBG(7, "hw_ep=%d, is_tx=0x%x, channel=%d\n", + dev_dbg(musb->controller, "hw_ep=%d, is_tx=0x%x, channel=%d\n", hw_ep->epnum, is_tx, ch_num); return &(ux500_channel->channel); @@ -201,8 +204,9 @@ static struct dma_channel *ux500_dma_channel_allocate(struct dma_controller *c, static void ux500_dma_channel_release(struct dma_channel *channel) { struct ux500_dma_channel *ux500_channel = channel->private_data; + struct musb *musb = ux500_channel->controller->private_data; - DBG(7, "channel=%d\n", ux500_channel->ch_num); + dev_dbg(musb->controller, "channel=%d\n", ux500_channel->ch_num); if (ux500_channel->is_allocated) { ux500_channel->is_allocated = 0; @@ -252,8 +256,8 @@ static int ux500_dma_channel_abort(struct dma_channel *channel) void __iomem *epio = musb->endpoints[ux500_channel->hw_ep->epnum].regs; u16 csr; - DBG(4, "channel=%d, is_tx=%d\n", ux500_channel->ch_num, - ux500_channel->is_tx); + dev_dbg(musb->controller, "channel=%d, is_tx=%d\n", + ux500_channel->ch_num, ux500_channel->is_tx); if (channel->status == MUSB_DMA_STATUS_BUSY) { if (ux500_channel->is_tx) { diff --git a/drivers/usb/otg/isp1301_omap.c b/drivers/usb/otg/isp1301_omap.c index ca9b690a7e40..8c86787c2f09 100644 --- a/drivers/usb/otg/isp1301_omap.c +++ b/drivers/usb/otg/isp1301_omap.c @@ -899,7 +899,7 @@ static int otg_bind(struct isp1301 *isp) if (otg_dev) status = request_irq(otg_dev->resource[1].start, omap_otg_irq, - IRQF_DISABLED, DRIVER_NAME, isp); + 0, DRIVER_NAME, isp); else status = -ENODEV; diff --git a/drivers/usb/otg/twl6030-usb.c b/drivers/usb/otg/twl6030-usb.c index b4d2c0972b3d..ed2b26cfe814 100644 --- a/drivers/usb/otg/twl6030-usb.c +++ b/drivers/usb/otg/twl6030-usb.c @@ -137,22 +137,6 @@ static inline u8 twl6030_readb(struct twl6030_usb *twl, u8 module, u8 address) return ret; } -/*-------------------------------------------------------------------------*/ -static int twl6030_set_phy_clk(struct otg_transceiver *x, int on) -{ - struct twl6030_usb *twl; - struct device *dev; - struct twl4030_usb_data *pdata; - - twl = xceiv_to_twl(x); - dev = twl->dev; - pdata = dev->platform_data; - - pdata->phy_set_clock(twl->dev, on); - - return 0; -} - static int twl6030_phy_init(struct otg_transceiver *x) { struct twl6030_usb *twl; diff --git a/drivers/usb/renesas_usbhs/Kconfig b/drivers/usb/renesas_usbhs/Kconfig index 286cbf1ca7de..6f4afa436381 100644 --- a/drivers/usb/renesas_usbhs/Kconfig +++ b/drivers/usb/renesas_usbhs/Kconfig @@ -4,7 +4,7 @@ config USB_RENESAS_USBHS tristate 'Renesas USBHS controller' - depends on SUPERH || ARCH_SHMOBILE + depends on USB && USB_GADGET default n help Renesas USBHS is a discrete USB host and peripheral controller chip diff --git a/drivers/usb/renesas_usbhs/Makefile b/drivers/usb/renesas_usbhs/Makefile index ce08345fa15a..bc8aef4311a1 100644 --- a/drivers/usb/renesas_usbhs/Makefile +++ b/drivers/usb/renesas_usbhs/Makefile @@ -6,4 +6,10 @@ obj-$(CONFIG_USB_RENESAS_USBHS) += renesas_usbhs.o renesas_usbhs-y := common.o mod.o pipe.o fifo.o -renesas_usbhs-$(CONFIG_USB_RENESAS_USBHS_UDC) += mod_gadget.o +ifneq ($(CONFIG_USB_RENESAS_USBHS_HCD),) + renesas_usbhs-y += mod_host.o +endif + +ifneq ($(CONFIG_USB_RENESAS_USBHS_UDC),) + renesas_usbhs-y += mod_gadget.o +endif diff --git a/drivers/usb/renesas_usbhs/common.c b/drivers/usb/renesas_usbhs/common.c index d8239e5efa66..d2e2efaba658 100644 --- a/drivers/usb/renesas_usbhs/common.c +++ b/drivers/usb/renesas_usbhs/common.c @@ -61,8 +61,8 @@ */ #define usbhs_platform_call(priv, func, args...)\ (!(priv) ? -ENODEV : \ - !((priv)->pfunc->func) ? 0 : \ - (priv)->pfunc->func(args)) + !((priv)->pfunc.func) ? 0 : \ + (priv)->pfunc.func(args)) /* * common functions @@ -114,6 +114,10 @@ void usbhs_sys_host_ctrl(struct usbhs_priv *priv, int enable) { u16 mask = DCFM | DRPD | DPRPU; u16 val = DCFM | DRPD; + int has_otg = usbhs_get_dparam(priv, has_otg); + + if (has_otg) + usbhs_bset(priv, DVSTCTR, (EXTLP | PWEN), (EXTLP | PWEN)); /* * if enable @@ -147,19 +151,133 @@ int usbhs_frame_get_num(struct usbhs_priv *priv) } /* + * usb request functions + */ +void usbhs_usbreq_get_val(struct usbhs_priv *priv, struct usb_ctrlrequest *req) +{ + u16 val; + + val = usbhs_read(priv, USBREQ); + req->bRequest = (val >> 8) & 0xFF; + req->bRequestType = (val >> 0) & 0xFF; + + req->wValue = usbhs_read(priv, USBVAL); + req->wIndex = usbhs_read(priv, USBINDX); + req->wLength = usbhs_read(priv, USBLENG); +} + +void usbhs_usbreq_set_val(struct usbhs_priv *priv, struct usb_ctrlrequest *req) +{ + usbhs_write(priv, USBREQ, (req->bRequest << 8) | req->bRequestType); + usbhs_write(priv, USBVAL, req->wValue); + usbhs_write(priv, USBINDX, req->wIndex); + usbhs_write(priv, USBLENG, req->wLength); + + usbhs_bset(priv, DCPCTR, SUREQ, SUREQ); +} + +/* + * bus/vbus functions + */ +void usbhs_bus_send_sof_enable(struct usbhs_priv *priv) +{ + u16 status = usbhs_read(priv, DVSTCTR) & (USBRST | UACT); + + if (status != USBRST) { + struct device *dev = usbhs_priv_to_dev(priv); + dev_err(dev, "usbhs should be reset\n"); + } + + usbhs_bset(priv, DVSTCTR, (USBRST | UACT), UACT); +} + +void usbhs_bus_send_reset(struct usbhs_priv *priv) +{ + usbhs_bset(priv, DVSTCTR, (USBRST | UACT), USBRST); +} + +int usbhs_bus_get_speed(struct usbhs_priv *priv) +{ + u16 dvstctr = usbhs_read(priv, DVSTCTR); + + switch (RHST & dvstctr) { + case RHST_LOW_SPEED: + return USB_SPEED_LOW; + case RHST_FULL_SPEED: + return USB_SPEED_FULL; + case RHST_HIGH_SPEED: + return USB_SPEED_HIGH; + } + + return USB_SPEED_UNKNOWN; +} + +int usbhs_vbus_ctrl(struct usbhs_priv *priv, int enable) +{ + struct platform_device *pdev = usbhs_priv_to_pdev(priv); + + return usbhs_platform_call(priv, set_vbus, pdev, enable); +} + +static void usbhsc_bus_init(struct usbhs_priv *priv) +{ + usbhs_write(priv, DVSTCTR, 0); + + usbhs_vbus_ctrl(priv, 0); +} + +/* + * device configuration + */ +int usbhs_set_device_speed(struct usbhs_priv *priv, int devnum, + u16 upphub, u16 hubport, u16 speed) +{ + struct device *dev = usbhs_priv_to_dev(priv); + u16 usbspd = 0; + u32 reg = DEVADD0 + (2 * devnum); + + if (devnum > 10) { + dev_err(dev, "cannot set speed to unknown device %d\n", devnum); + return -EIO; + } + + if (upphub > 0xA) { + dev_err(dev, "unsupported hub number %d\n", upphub); + return -EIO; + } + + switch (speed) { + case USB_SPEED_LOW: + usbspd = USBSPD_SPEED_LOW; + break; + case USB_SPEED_FULL: + usbspd = USBSPD_SPEED_FULL; + break; + case USB_SPEED_HIGH: + usbspd = USBSPD_SPEED_HIGH; + break; + default: + dev_err(dev, "unsupported speed %d\n", speed); + return -EIO; + } + + usbhs_write(priv, reg, UPPHUB(upphub) | + HUBPORT(hubport)| + USBSPD(usbspd)); + + return 0; +} + +/* * local functions */ -static void usbhsc_bus_ctrl(struct usbhs_priv *priv, int enable) +static void usbhsc_set_buswait(struct usbhs_priv *priv) { int wait = usbhs_get_dparam(priv, buswait_bwait); - u16 data = 0; - if (enable) { - /* set bus wait if platform have */ - if (wait) - usbhs_bset(priv, BUSWAIT, 0x000F, wait); - } - usbhs_write(priv, DVSTCTR, data); + /* set bus wait if platform have */ + if (wait) + usbhs_bset(priv, BUSWAIT, 0x000F, wait); } /* @@ -191,10 +309,8 @@ static void usbhsc_power_ctrl(struct usbhs_priv *priv, int enable) /* USB on */ usbhs_sys_clock_ctrl(priv, enable); - usbhsc_bus_ctrl(priv, enable); } else { /* USB off */ - usbhsc_bus_ctrl(priv, enable); usbhs_sys_clock_ctrl(priv, enable); /* disable PM */ @@ -203,13 +319,10 @@ static void usbhsc_power_ctrl(struct usbhs_priv *priv, int enable) } /* - * notify hotplug + * hotplug */ -static void usbhsc_notify_hotplug(struct work_struct *work) +static void usbhsc_hotplug(struct usbhs_priv *priv) { - struct usbhs_priv *priv = container_of(work, - struct usbhs_priv, - notify_hotplug_work.work); struct platform_device *pdev = usbhs_priv_to_pdev(priv); struct usbhs_mod *mod = usbhs_mod_get_current(priv); int id; @@ -237,6 +350,10 @@ static void usbhsc_notify_hotplug(struct work_struct *work) if (usbhsc_flags_has(priv, USBHSF_RUNTIME_PWCTRL)) usbhsc_power_ctrl(priv, enable); + /* bus init */ + usbhsc_set_buswait(priv); + usbhsc_bus_init(priv); + /* module start */ usbhs_mod_call(priv, start, priv); @@ -246,6 +363,9 @@ static void usbhsc_notify_hotplug(struct work_struct *work) /* module stop */ usbhs_mod_call(priv, stop, priv); + /* bus init */ + usbhsc_bus_init(priv); + /* power off */ if (usbhsc_flags_has(priv, USBHSF_RUNTIME_PWCTRL)) usbhsc_power_ctrl(priv, enable); @@ -257,6 +377,17 @@ static void usbhsc_notify_hotplug(struct work_struct *work) } } +/* + * notify hotplug + */ +static void usbhsc_notify_hotplug(struct work_struct *work) +{ + struct usbhs_priv *priv = container_of(work, + struct usbhs_priv, + notify_hotplug_work.work); + usbhsc_hotplug(priv); +} + int usbhsc_drvcllbck_notify_hotplug(struct platform_device *pdev) { struct usbhs_priv *priv = usbhs_pdev_to_priv(pdev); @@ -315,24 +446,28 @@ static int __devinit usbhs_probe(struct platform_device *pdev) /* * care platform info */ - priv->pfunc = &info->platform_callback; - priv->dparam = &info->driver_param; + memcpy(&priv->pfunc, + &info->platform_callback, + sizeof(struct renesas_usbhs_platform_callback)); + memcpy(&priv->dparam, + &info->driver_param, + sizeof(struct renesas_usbhs_driver_param)); /* set driver callback functions for platform */ dfunc = &info->driver_callback; dfunc->notify_hotplug = usbhsc_drvcllbck_notify_hotplug; /* set default param if platform doesn't have */ - if (!priv->dparam->pipe_type) { - priv->dparam->pipe_type = usbhsc_default_pipe_type; - priv->dparam->pipe_size = ARRAY_SIZE(usbhsc_default_pipe_type); + if (!priv->dparam.pipe_type) { + priv->dparam.pipe_type = usbhsc_default_pipe_type; + priv->dparam.pipe_size = ARRAY_SIZE(usbhsc_default_pipe_type); } - if (!priv->dparam->pio_dma_border) - priv->dparam->pio_dma_border = 64; /* 64byte */ + if (!priv->dparam.pio_dma_border) + priv->dparam.pio_dma_border = 64; /* 64byte */ /* FIXME */ /* runtime power control ? */ - if (priv->pfunc->get_vbus) + if (priv->pfunc.get_vbus) usbhsc_flags_set(priv, USBHSF_RUNTIME_PWCTRL); /* @@ -443,9 +578,60 @@ static int __devexit usbhs_remove(struct platform_device *pdev) return 0; } +static int usbhsc_suspend(struct device *dev) +{ + struct usbhs_priv *priv = dev_get_drvdata(dev); + struct usbhs_mod *mod = usbhs_mod_get_current(priv); + + if (mod) { + usbhs_mod_call(priv, stop, priv); + usbhs_mod_change(priv, -1); + } + + if (mod || !usbhsc_flags_has(priv, USBHSF_RUNTIME_PWCTRL)) + usbhsc_power_ctrl(priv, 0); + + return 0; +} + +static int usbhsc_resume(struct device *dev) +{ + struct usbhs_priv *priv = dev_get_drvdata(dev); + struct platform_device *pdev = usbhs_priv_to_pdev(priv); + + usbhs_platform_call(priv, phy_reset, pdev); + + if (!usbhsc_flags_has(priv, USBHSF_RUNTIME_PWCTRL)) + usbhsc_power_ctrl(priv, 1); + + usbhsc_hotplug(priv); + + return 0; +} + +static int usbhsc_runtime_nop(struct device *dev) +{ + /* Runtime PM callback shared between ->runtime_suspend() + * and ->runtime_resume(). Simply returns success. + * + * This driver re-initializes all registers after + * pm_runtime_get_sync() anyway so there is no need + * to save and restore registers here. + */ + return 0; +} + +static const struct dev_pm_ops usbhsc_pm_ops = { + .suspend = usbhsc_suspend, + .resume = usbhsc_resume, + .runtime_suspend = usbhsc_runtime_nop, + .runtime_resume = usbhsc_runtime_nop, +}; + static struct platform_driver renesas_usbhs_driver = { .driver = { .name = "renesas_usbhs", + .pm = &usbhsc_pm_ops, }, .probe = usbhs_probe, .remove = __devexit_p(usbhs_remove), diff --git a/drivers/usb/renesas_usbhs/common.h b/drivers/usb/renesas_usbhs/common.h index b410463a1212..8729da5c3be6 100644 --- a/drivers/usb/renesas_usbhs/common.h +++ b/drivers/usb/renesas_usbhs/common.h @@ -90,6 +90,17 @@ struct usbhs_priv; #define PIPE9TRN 0x00BA #define PIPEATRE 0x00BC #define PIPEATRN 0x00BE +#define DEVADD0 0x00D0 /* Device address n configuration */ +#define DEVADD1 0x00D2 +#define DEVADD2 0x00D4 +#define DEVADD3 0x00D6 +#define DEVADD4 0x00D8 +#define DEVADD5 0x00DA +#define DEVADD6 0x00DC +#define DEVADD7 0x00DE +#define DEVADD8 0x00E0 +#define DEVADD9 0x00E2 +#define DEVADDA 0x00E4 /* SYSCFG */ #define SCKE (1 << 10) /* USB Module Clock Enable */ @@ -102,6 +113,8 @@ struct usbhs_priv; /* DVSTCTR */ #define EXTLP (1 << 10) /* Controls the EXTLP pin output state */ #define PWEN (1 << 9) /* Controls the PWEN pin output state */ +#define USBRST (1 << 6) /* Bus Reset Output */ +#define UACT (1 << 4) /* USB Bus Enable */ #define RHST (0x7) /* Reset Handshake */ #define RHST_LOW_SPEED 1 /* Low-speed connection */ #define RHST_FULL_SPEED 2 /* Full-speed connection */ @@ -159,6 +172,15 @@ struct usbhs_priv; #define NODATA_STATUS_STAGE 5 /* Control write NoData status stage */ #define SEQUENCE_ERROR 6 /* Control transfer sequence error */ +/* INTSTS1 */ +#define OVRCR (1 << 15) /* OVRCR Interrupt Status */ +#define BCHG (1 << 14) /* USB Bus Change Interrupt Status */ +#define DTCH (1 << 12) /* USB Disconnection Detect Interrupt Status */ +#define ATTCH (1 << 11) /* ATTCH Interrupt Status */ +#define EOFERR (1 << 6) /* EOF Error Detect Interrupt Status */ +#define SIGN (1 << 5) /* Setup Transaction Error Interrupt Status */ +#define SACK (1 << 4) /* Setup Transaction ACK Response Interrupt Status */ + /* PIPECFG */ /* DCPCFG */ #define TYPE_NONE (0 << 14) /* Transfer Type */ @@ -183,9 +205,11 @@ struct usbhs_priv; /* PIPEnCTR */ /* DCPCTR */ #define BSTS (1 << 15) /* Buffer Status */ +#define SUREQ (1 << 14) /* Sending SETUP Token */ #define CSSTS (1 << 12) /* CSSTS Status */ -#define SQCLR (1 << 8) /* Toggle Bit Clear */ #define ACLRM (1 << 9) /* Buffer Auto-Clear Mode */ +#define SQCLR (1 << 8) /* Toggle Bit Clear */ +#define SQSET (1 << 7) /* Toggle Bit Set */ #define PBUSY (1 << 5) /* Pipe Busy */ #define PID_MASK (0x3) /* Response PID */ #define PID_NAK 0 @@ -202,6 +226,14 @@ struct usbhs_priv; /* FRMNUM */ #define FRNM_MASK (0x7FF) +/* DEVADDn */ +#define UPPHUB(x) (((x) & 0xF) << 11) /* HUB Register */ +#define HUBPORT(x) (((x) & 0x7) << 8) /* HUB Port for Target Device */ +#define USBSPD(x) (((x) & 0x3) << 6) /* Device Transfer Rate */ +#define USBSPD_SPEED_LOW 0x1 +#define USBSPD_SPEED_FULL 0x2 +#define USBSPD_SPEED_HIGH 0x3 + /* * struct */ @@ -210,8 +242,8 @@ struct usbhs_priv { void __iomem *base; unsigned int irq; - struct renesas_usbhs_platform_callback *pfunc; - struct renesas_usbhs_driver_param *dparam; + struct renesas_usbhs_platform_callback pfunc; + struct renesas_usbhs_driver_param dparam; struct delayed_work notify_hotplug_work; struct platform_device *pdev; @@ -258,15 +290,35 @@ void usbhs_sys_host_ctrl(struct usbhs_priv *priv, int enable); void usbhs_sys_function_ctrl(struct usbhs_priv *priv, int enable); /* + * usb request + */ +void usbhs_usbreq_get_val(struct usbhs_priv *priv, struct usb_ctrlrequest *req); +void usbhs_usbreq_set_val(struct usbhs_priv *priv, struct usb_ctrlrequest *req); + +/* + * bus + */ +void usbhs_bus_send_sof_enable(struct usbhs_priv *priv); +void usbhs_bus_send_reset(struct usbhs_priv *priv); +int usbhs_bus_get_speed(struct usbhs_priv *priv); +int usbhs_vbus_ctrl(struct usbhs_priv *priv, int enable); + +/* * frame */ int usbhs_frame_get_num(struct usbhs_priv *priv); /* + * device config + */ +int usbhs_set_device_speed(struct usbhs_priv *priv, int devnum, u16 upphub, + u16 hubport, u16 speed); + +/* * data */ struct usbhs_priv *usbhs_pdev_to_priv(struct platform_device *pdev); -#define usbhs_get_dparam(priv, param) (priv->dparam->param) +#define usbhs_get_dparam(priv, param) (priv->dparam.param) #define usbhs_priv_to_pdev(priv) (priv->pdev) #define usbhs_priv_to_dev(priv) (&priv->pdev->dev) #define usbhs_priv_to_lock(priv) (&priv->lock) diff --git a/drivers/usb/renesas_usbhs/fifo.c b/drivers/usb/renesas_usbhs/fifo.c index a34430f55fb7..8da685e796d1 100644 --- a/drivers/usb/renesas_usbhs/fifo.c +++ b/drivers/usb/renesas_usbhs/fifo.c @@ -54,35 +54,45 @@ static struct usbhs_pkt_handle usbhsf_null_handler = { }; void usbhs_pkt_push(struct usbhs_pipe *pipe, struct usbhs_pkt *pkt, - struct usbhs_pkt_handle *handler, + void (*done)(struct usbhs_priv *priv, + struct usbhs_pkt *pkt), void *buf, int len, int zero) { struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); struct device *dev = usbhs_priv_to_dev(priv); unsigned long flags; + if (!done) { + dev_err(dev, "no done function\n"); + return; + } + /******************** spin lock ********************/ usbhs_lock(priv, flags); - if (!handler) { + if (!pipe->handler) { dev_err(dev, "no handler function\n"); - handler = &usbhsf_null_handler; + pipe->handler = &usbhsf_null_handler; } list_del_init(&pkt->node); list_add_tail(&pkt->node, &pipe->list); + /* + * each pkt must hold own handler. + * because handler might be changed by its situation. + * dma handler -> pio handler. + */ pkt->pipe = pipe; pkt->buf = buf; - pkt->handler = handler; + pkt->handler = pipe->handler; pkt->length = len; pkt->zero = zero; pkt->actual = 0; + pkt->done = done; usbhs_unlock(priv, flags); /******************** spin unlock ******************/ - - usbhs_pkt_start(pipe); } static void __usbhsf_pkt_del(struct usbhs_pkt *pkt) @@ -118,10 +128,15 @@ struct usbhs_pkt *usbhs_pkt_pop(struct usbhs_pipe *pipe, struct usbhs_pkt *pkt) return pkt; } -int __usbhs_pkt_handler(struct usbhs_pipe *pipe, int type) +enum { + USBHSF_PKT_PREPARE, + USBHSF_PKT_TRY_RUN, + USBHSF_PKT_DMA_DONE, +}; + +static int usbhsf_pkt_handler(struct usbhs_pipe *pipe, int type) { struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); - struct usbhs_pipe_info *info = usbhs_priv_to_pipeinfo(priv); struct usbhs_pkt *pkt; struct device *dev = usbhs_priv_to_dev(priv); int (*func)(struct usbhs_pkt *pkt, int *is_done); @@ -161,13 +176,18 @@ __usbhs_pkt_handler_end: /******************** spin unlock ******************/ if (is_done) { - info->done(pkt); + pkt->done(priv, pkt); usbhs_pkt_start(pipe); } return ret; } +void usbhs_pkt_start(struct usbhs_pipe *pipe) +{ + usbhsf_pkt_handler(pipe, USBHSF_PKT_PREPARE); +} + /* * irq enable/disable function */ @@ -276,9 +296,13 @@ static int usbhsf_fifo_select(struct usbhs_pipe *pipe, usbhsf_fifo_is_busy(fifo)) return -EBUSY; - if (usbhs_pipe_is_dcp(pipe)) + if (usbhs_pipe_is_dcp(pipe)) { base |= (1 == write) << 5; /* ISEL */ + if (usbhs_mod_is_host(priv)) + usbhs_dcp_dir_for_host(pipe, write); + } + /* "base" will be used below */ usbhs_write(priv, fifo->sel, base | MBW_32); @@ -297,6 +321,151 @@ static int usbhsf_fifo_select(struct usbhs_pipe *pipe, } /* + * DCP status stage + */ +static int usbhs_dcp_dir_switch_to_write(struct usbhs_pkt *pkt, int *is_done) +{ + struct usbhs_pipe *pipe = pkt->pipe; + struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); + struct usbhs_fifo *fifo = usbhsf_get_cfifo(priv); /* CFIFO */ + struct device *dev = usbhs_priv_to_dev(priv); + int ret; + + usbhs_pipe_disable(pipe); + + ret = usbhsf_fifo_select(pipe, fifo, 1); + if (ret < 0) { + dev_err(dev, "%s() faile\n", __func__); + return ret; + } + + usbhs_pipe_sequence_data1(pipe); /* DATA1 */ + + usbhsf_fifo_clear(pipe, fifo); + usbhsf_send_terminator(pipe, fifo); + + usbhsf_fifo_unselect(pipe, fifo); + + usbhsf_tx_irq_ctrl(pipe, 1); + usbhs_pipe_enable(pipe); + + return ret; +} + +static int usbhs_dcp_dir_switch_to_read(struct usbhs_pkt *pkt, int *is_done) +{ + struct usbhs_pipe *pipe = pkt->pipe; + struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); + struct usbhs_fifo *fifo = usbhsf_get_cfifo(priv); /* CFIFO */ + struct device *dev = usbhs_priv_to_dev(priv); + int ret; + + usbhs_pipe_disable(pipe); + + ret = usbhsf_fifo_select(pipe, fifo, 0); + if (ret < 0) { + dev_err(dev, "%s() fail\n", __func__); + return ret; + } + + usbhs_pipe_sequence_data1(pipe); /* DATA1 */ + usbhsf_fifo_clear(pipe, fifo); + + usbhsf_fifo_unselect(pipe, fifo); + + usbhsf_rx_irq_ctrl(pipe, 1); + usbhs_pipe_enable(pipe); + + return ret; + +} + +static int usbhs_dcp_dir_switch_done(struct usbhs_pkt *pkt, int *is_done) +{ + struct usbhs_pipe *pipe = pkt->pipe; + + if (pkt->handler == &usbhs_dcp_status_stage_in_handler) + usbhsf_tx_irq_ctrl(pipe, 0); + else + usbhsf_rx_irq_ctrl(pipe, 0); + + pkt->actual = pkt->length; + *is_done = 1; + + return 0; +} + +struct usbhs_pkt_handle usbhs_dcp_status_stage_in_handler = { + .prepare = usbhs_dcp_dir_switch_to_write, + .try_run = usbhs_dcp_dir_switch_done, +}; + +struct usbhs_pkt_handle usbhs_dcp_status_stage_out_handler = { + .prepare = usbhs_dcp_dir_switch_to_read, + .try_run = usbhs_dcp_dir_switch_done, +}; + +/* + * DCP data stage (push) + */ +static int usbhsf_dcp_data_stage_try_push(struct usbhs_pkt *pkt, int *is_done) +{ + struct usbhs_pipe *pipe = pkt->pipe; + + usbhs_pipe_sequence_data1(pipe); /* DATA1 */ + + /* + * change handler to PIO push + */ + pkt->handler = &usbhs_fifo_pio_push_handler; + + return pkt->handler->prepare(pkt, is_done); +} + +struct usbhs_pkt_handle usbhs_dcp_data_stage_out_handler = { + .prepare = usbhsf_dcp_data_stage_try_push, +}; + +/* + * DCP data stage (pop) + */ +static int usbhsf_dcp_data_stage_prepare_pop(struct usbhs_pkt *pkt, + int *is_done) +{ + struct usbhs_pipe *pipe = pkt->pipe; + struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); + struct usbhs_fifo *fifo = usbhsf_get_cfifo(priv); + + if (usbhs_pipe_is_busy(pipe)) + return 0; + + /* + * prepare pop for DCP should + * - change DCP direction, + * - clear fifo + * - DATA1 + */ + usbhs_pipe_disable(pipe); + + usbhs_pipe_sequence_data1(pipe); /* DATA1 */ + + usbhsf_fifo_select(pipe, fifo, 0); + usbhsf_fifo_clear(pipe, fifo); + usbhsf_fifo_unselect(pipe, fifo); + + /* + * change handler to PIO pop + */ + pkt->handler = &usbhs_fifo_pio_pop_handler; + + return pkt->handler->prepare(pkt, is_done); +} + +struct usbhs_pkt_handle usbhs_dcp_data_stage_in_handler = { + .prepare = usbhsf_dcp_data_stage_prepare_pop, +}; + +/* * PIO push handler */ static int usbhsf_pio_try_push(struct usbhs_pkt *pkt, int *is_done) @@ -452,6 +621,20 @@ static int usbhsf_pio_try_pop(struct usbhs_pkt *pkt, int *is_done) total_len = len; /* + * update actual length first here to decide disable pipe. + * if this pipe keeps BUF status and all data were popped, + * then, next interrupt/token will be issued again + */ + pkt->actual += total_len; + + if ((pkt->actual == pkt->length) || /* receive all data */ + (total_len < maxp)) { /* short packet */ + *is_done = 1; + usbhsf_rx_irq_ctrl(pipe, 0); + usbhs_pipe_disable(pipe); /* disable pipe first */ + } + + /* * Buffer clear if Zero-Length packet * * see @@ -481,16 +664,7 @@ static int usbhsf_pio_try_pop(struct usbhs_pkt *pkt, int *is_done) buf[i] = (data >> ((i & 0x03) * 8)) & 0xff; } - pkt->actual += total_len; - usbhs_fifo_read_end: - if ((pkt->actual == pkt->length) || /* receive all data */ - (total_len < maxp)) { /* short packet */ - *is_done = 1; - usbhsf_rx_irq_ctrl(pipe, 0); - usbhs_pipe_disable(pipe); - } - dev_dbg(dev, " recv %d (%d/ %d/ %d/ %d)\n", usbhs_pipe_number(pipe), pkt->length, pkt->actual, *is_done, pkt->zero); @@ -646,7 +820,7 @@ static int usbhsf_dma_prepare_push(struct usbhs_pkt *pkt, int *is_done) if (len % 4) /* 32bit alignment */ goto usbhsf_pio_prepare_push; - if (((u32)pkt->buf + pkt->actual) & 0x7) /* 8byte alignment */ + if ((*(u32 *) pkt->buf + pkt->actual) & 0x7) /* 8byte alignment */ goto usbhsf_pio_prepare_push; /* get enable DMA fifo */ @@ -723,7 +897,7 @@ static int usbhsf_dma_try_pop(struct usbhs_pkt *pkt, int *is_done) if (!fifo) goto usbhsf_pio_prepare_pop; - if (((u32)pkt->buf + pkt->actual) & 0x7) /* 8byte alignment */ + if ((*(u32 *) pkt->buf + pkt->actual) & 0x7) /* 8byte alignment */ goto usbhsf_pio_prepare_pop; ret = usbhsf_fifo_select(pipe, fifo, 0); @@ -884,7 +1058,7 @@ static int usbhsf_irq_empty(struct usbhs_priv *priv, if (!(irq_state->bempsts & (1 << i))) continue; - ret = usbhs_pkt_run(pipe); + ret = usbhsf_pkt_handler(pipe, USBHSF_PKT_TRY_RUN); if (ret < 0) dev_err(dev, "irq_empty run_error %d : %d\n", i, ret); } @@ -914,7 +1088,7 @@ static int usbhsf_irq_ready(struct usbhs_priv *priv, if (!(irq_state->brdysts & (1 << i))) continue; - ret = usbhs_pkt_run(pipe); + ret = usbhsf_pkt_handler(pipe, USBHSF_PKT_TRY_RUN); if (ret < 0) dev_err(dev, "irq_ready run_error %d : %d\n", i, ret); } @@ -929,7 +1103,7 @@ static void usbhsf_dma_complete(void *arg) struct device *dev = usbhs_priv_to_dev(priv); int ret; - ret = usbhs_pkt_dmadone(pipe); + ret = usbhsf_pkt_handler(pipe, USBHSF_PKT_DMA_DONE); if (ret < 0) dev_err(dev, "dma_complete run_error %d : %d\n", usbhs_pipe_number(pipe), ret); diff --git a/drivers/usb/renesas_usbhs/fifo.h b/drivers/usb/renesas_usbhs/fifo.h index ed6d8e56c13c..32a7b246b28d 100644 --- a/drivers/usb/renesas_usbhs/fifo.h +++ b/drivers/usb/renesas_usbhs/fifo.h @@ -51,6 +51,8 @@ struct usbhs_pkt { struct list_head node; struct usbhs_pipe *pipe; struct usbhs_pkt_handle *handler; + void (*done)(struct usbhs_priv *priv, + struct usbhs_pkt *pkt); dma_addr_t dma; void *buf; int length; @@ -76,12 +78,6 @@ void usbhs_fifo_quit(struct usbhs_priv *priv); /* * packet info */ -enum { - USBHSF_PKT_PREPARE, - USBHSF_PKT_TRY_RUN, - USBHSF_PKT_DMA_DONE, -}; - extern struct usbhs_pkt_handle usbhs_fifo_pio_push_handler; extern struct usbhs_pkt_handle usbhs_fifo_pio_pop_handler; extern struct usbhs_pkt_handle usbhs_ctrl_stage_end_handler; @@ -89,16 +85,18 @@ extern struct usbhs_pkt_handle usbhs_ctrl_stage_end_handler; extern struct usbhs_pkt_handle usbhs_fifo_dma_push_handler; extern struct usbhs_pkt_handle usbhs_fifo_dma_pop_handler; +extern struct usbhs_pkt_handle usbhs_dcp_status_stage_in_handler; +extern struct usbhs_pkt_handle usbhs_dcp_status_stage_out_handler; + +extern struct usbhs_pkt_handle usbhs_dcp_data_stage_in_handler; +extern struct usbhs_pkt_handle usbhs_dcp_data_stage_out_handler; void usbhs_pkt_init(struct usbhs_pkt *pkt); void usbhs_pkt_push(struct usbhs_pipe *pipe, struct usbhs_pkt *pkt, - struct usbhs_pkt_handle *handler, + void (*done)(struct usbhs_priv *priv, + struct usbhs_pkt *pkt), void *buf, int len, int zero); struct usbhs_pkt *usbhs_pkt_pop(struct usbhs_pipe *pipe, struct usbhs_pkt *pkt); -int __usbhs_pkt_handler(struct usbhs_pipe *pipe, int type); - -#define usbhs_pkt_start(p) __usbhs_pkt_handler(p, USBHSF_PKT_PREPARE) -#define usbhs_pkt_run(p) __usbhs_pkt_handler(p, USBHSF_PKT_TRY_RUN) -#define usbhs_pkt_dmadone(p) __usbhs_pkt_handler(p, USBHSF_PKT_DMA_DONE) +void usbhs_pkt_start(struct usbhs_pipe *pipe); #endif /* RENESAS_USB_FIFO_H */ diff --git a/drivers/usb/renesas_usbhs/mod.c b/drivers/usb/renesas_usbhs/mod.c index a577f8f4064c..053f86d70009 100644 --- a/drivers/usb/renesas_usbhs/mod.c +++ b/drivers/usb/renesas_usbhs/mod.c @@ -58,7 +58,7 @@ void usbhs_mod_autonomy_mode(struct usbhs_priv *priv) struct usbhs_mod_info *info = usbhs_priv_to_modinfo(priv); info->irq_vbus = usbhsm_autonomy_irq_vbus; - priv->pfunc->get_vbus = usbhsm_autonomy_get_vbus; + priv->pfunc.get_vbus = usbhsm_autonomy_get_vbus; usbhs_irq_callback_update(priv, NULL); } @@ -93,8 +93,9 @@ struct usbhs_mod *usbhs_mod_get(struct usbhs_priv *priv, int id) return ret; } -int usbhs_mod_is_host(struct usbhs_priv *priv, struct usbhs_mod *mod) +int usbhs_mod_is_host(struct usbhs_priv *priv) { + struct usbhs_mod *mod = usbhs_mod_get_current(priv); struct usbhs_mod_info *info = usbhs_priv_to_modinfo(priv); if (!mod) @@ -139,13 +140,17 @@ int usbhs_mod_probe(struct usbhs_priv *priv) /* * install host/gadget driver */ - ret = usbhs_mod_gadget_probe(priv); + ret = usbhs_mod_host_probe(priv); if (ret < 0) return ret; + ret = usbhs_mod_gadget_probe(priv); + if (ret < 0) + goto mod_init_host_err; + /* irq settings */ ret = request_irq(priv->irq, usbhs_interrupt, - IRQF_DISABLED, dev_name(dev), priv); + 0, dev_name(dev), priv); if (ret) { dev_err(dev, "irq request err\n"); goto mod_init_gadget_err; @@ -155,12 +160,15 @@ int usbhs_mod_probe(struct usbhs_priv *priv) mod_init_gadget_err: usbhs_mod_gadget_remove(priv); +mod_init_host_err: + usbhs_mod_host_remove(priv); return ret; } void usbhs_mod_remove(struct usbhs_priv *priv) { + usbhs_mod_host_remove(priv); usbhs_mod_gadget_remove(priv); free_irq(priv->irq, priv); } @@ -168,20 +176,6 @@ void usbhs_mod_remove(struct usbhs_priv *priv) /* * status functions */ -int usbhs_status_get_usb_speed(struct usbhs_irq_state *irq_state) -{ - switch (irq_state->dvstctr & RHST) { - case RHST_LOW_SPEED: - return USB_SPEED_LOW; - case RHST_FULL_SPEED: - return USB_SPEED_FULL; - case RHST_HIGH_SPEED: - return USB_SPEED_HIGH; - } - - return USB_SPEED_UNKNOWN; -} - int usbhs_status_get_device_state(struct usbhs_irq_state *irq_state) { int state = irq_state->intsts0 & DVSQ_MASK; @@ -221,8 +215,6 @@ static void usbhs_status_get_each_irq(struct usbhs_priv *priv, state->intsts0 = usbhs_read(priv, INTSTS0); state->intsts1 = usbhs_read(priv, INTSTS1); - state->dvstctr = usbhs_read(priv, DVSTCTR); - /* mask */ if (mod) { state->brdysts = usbhs_read(priv, BRDYSTS); @@ -269,6 +261,8 @@ static irqreturn_t usbhs_interrupt(int irq, void *data) * see also * usbhs_irq_setting_update */ + + /* INTSTS0 */ if (irq_state.intsts0 & VBINT) usbhs_mod_info_call(priv, irq_vbus, priv, &irq_state); @@ -284,15 +278,38 @@ static irqreturn_t usbhs_interrupt(int irq, void *data) if (irq_state.intsts0 & BRDY) usbhs_mod_call(priv, irq_ready, priv, &irq_state); + /* INTSTS1 */ + if (irq_state.intsts1 & ATTCH) + usbhs_mod_call(priv, irq_attch, priv, &irq_state); + + if (irq_state.intsts1 & DTCH) + usbhs_mod_call(priv, irq_dtch, priv, &irq_state); + + if (irq_state.intsts1 & SIGN) + usbhs_mod_call(priv, irq_sign, priv, &irq_state); + + if (irq_state.intsts1 & SACK) + usbhs_mod_call(priv, irq_sack, priv, &irq_state); + return IRQ_HANDLED; } void usbhs_irq_callback_update(struct usbhs_priv *priv, struct usbhs_mod *mod) { u16 intenb0 = 0; + u16 intenb1 = 0; struct usbhs_mod_info *info = usbhs_priv_to_modinfo(priv); + /* + * BEMPENB/BRDYENB are picky. + * below method is required + * + * - clear INTSTS0 + * - update BEMPENB/BRDYENB + * - update INTSTS0 + */ usbhs_write(priv, INTENB0, 0); + usbhs_write(priv, INTENB1, 0); usbhs_write(priv, BEMPENB, 0); usbhs_write(priv, BRDYENB, 0); @@ -310,6 +327,9 @@ void usbhs_irq_callback_update(struct usbhs_priv *priv, struct usbhs_mod *mod) intenb0 |= VBSE; if (mod) { + /* + * INTSTS0 + */ if (mod->irq_ctrl_stage) intenb0 |= CTRE; @@ -322,7 +342,26 @@ void usbhs_irq_callback_update(struct usbhs_priv *priv, struct usbhs_mod *mod) usbhs_write(priv, BRDYENB, mod->irq_brdysts); intenb0 |= BRDYE; } + + /* + * INTSTS1 + */ + if (mod->irq_attch) + intenb1 |= ATTCHE; + + if (mod->irq_attch) + intenb1 |= DTCHE; + + if (mod->irq_sign) + intenb1 |= SIGNE; + + if (mod->irq_sack) + intenb1 |= SACKE; } - usbhs_write(priv, INTENB0, intenb0); + if (intenb0) + usbhs_write(priv, INTENB0, intenb0); + + if (intenb1) + usbhs_write(priv, INTENB1, intenb1); } diff --git a/drivers/usb/renesas_usbhs/mod.h b/drivers/usb/renesas_usbhs/mod.h index 5c845a28a21c..8ae3733031cd 100644 --- a/drivers/usb/renesas_usbhs/mod.h +++ b/drivers/usb/renesas_usbhs/mod.h @@ -30,7 +30,6 @@ struct usbhs_irq_state { u16 brdysts; u16 nrdysts; u16 bempsts; - u16 dvstctr; }; struct usbhs_mod { @@ -42,26 +41,48 @@ struct usbhs_mod { int (*start)(struct usbhs_priv *priv); int (*stop)(struct usbhs_priv *priv); - /* INTSTS0 :: DVST (DVSQ) */ + /* + * INTSTS0 + */ + + /* DVST (DVSQ) */ int (*irq_dev_state)(struct usbhs_priv *priv, struct usbhs_irq_state *irq_state); - /* INTSTS0 :: CTRT (CTSQ) */ + /* CTRT (CTSQ) */ int (*irq_ctrl_stage)(struct usbhs_priv *priv, struct usbhs_irq_state *irq_state); - /* INTSTS0 :: BEMP */ - /* BEMPSTS */ + /* BEMP / BEMPSTS */ int (*irq_empty)(struct usbhs_priv *priv, struct usbhs_irq_state *irq_state); u16 irq_bempsts; - /* INTSTS0 :: BRDY */ - /* BRDYSTS */ + /* BRDY / BRDYSTS */ int (*irq_ready)(struct usbhs_priv *priv, struct usbhs_irq_state *irq_state); u16 irq_brdysts; + /* + * INTSTS1 + */ + + /* ATTCHE */ + int (*irq_attch)(struct usbhs_priv *priv, + struct usbhs_irq_state *irq_state); + + /* DTCHE */ + int (*irq_dtch)(struct usbhs_priv *priv, + struct usbhs_irq_state *irq_state); + + /* SIGN */ + int (*irq_sign)(struct usbhs_priv *priv, + struct usbhs_irq_state *irq_state); + + /* SACK */ + int (*irq_sack)(struct usbhs_priv *priv, + struct usbhs_irq_state *irq_state); + struct usbhs_priv *priv; }; @@ -89,7 +110,7 @@ struct usbhs_mod_info { struct usbhs_mod *usbhs_mod_get(struct usbhs_priv *priv, int id); struct usbhs_mod *usbhs_mod_get_current(struct usbhs_priv *priv); void usbhs_mod_register(struct usbhs_priv *priv, struct usbhs_mod *usb, int id); -int usbhs_mod_is_host(struct usbhs_priv *priv, struct usbhs_mod *mod); +int usbhs_mod_is_host(struct usbhs_priv *priv); int usbhs_mod_change(struct usbhs_priv *priv, int id); int usbhs_mod_probe(struct usbhs_priv *priv); void usbhs_mod_remove(struct usbhs_priv *priv); @@ -99,7 +120,6 @@ void usbhs_mod_autonomy_mode(struct usbhs_priv *priv); /* * status functions */ -int usbhs_status_get_usb_speed(struct usbhs_irq_state *irq_state); int usbhs_status_get_device_state(struct usbhs_irq_state *irq_state); int usbhs_status_get_ctrl_stage(struct usbhs_irq_state *irq_state); @@ -119,9 +139,24 @@ void usbhs_irq_callback_update(struct usbhs_priv *priv, struct usbhs_mod *mod); }) /* - * gadget control + * host / gadget control */ -#ifdef CONFIG_USB_RENESAS_USBHS_UDC +#if defined(CONFIG_USB_RENESAS_USBHS_HCD) || \ + defined(CONFIG_USB_RENESAS_USBHS_HCD_MODULE) +extern int __devinit usbhs_mod_host_probe(struct usbhs_priv *priv); +extern int __devexit usbhs_mod_host_remove(struct usbhs_priv *priv); +#else +static inline int usbhs_mod_host_probe(struct usbhs_priv *priv) +{ + return 0; +} +static inline void usbhs_mod_host_remove(struct usbhs_priv *priv) +{ +} +#endif + +#if defined(CONFIG_USB_RENESAS_USBHS_UDC) || \ + defined(CONFIG_USB_RENESAS_USBHS_UDC_MODULE) extern int __devinit usbhs_mod_gadget_probe(struct usbhs_priv *priv); extern void __devexit usbhs_mod_gadget_remove(struct usbhs_priv *priv); #else diff --git a/drivers/usb/renesas_usbhs/mod_gadget.c b/drivers/usb/renesas_usbhs/mod_gadget.c index cb2d451d511e..4cc7ee0babc6 100644 --- a/drivers/usb/renesas_usbhs/mod_gadget.c +++ b/drivers/usb/renesas_usbhs/mod_gadget.c @@ -39,7 +39,6 @@ struct usbhsg_uep { char ep_name[EP_NAME_SIZE]; struct usbhsg_gpriv *gpriv; - struct usbhs_pkt_handle *handler; }; struct usbhsg_gpriv { @@ -128,25 +127,6 @@ LIST_HEAD(the_controller_link); /* * queue push/pop */ -static void usbhsg_queue_push(struct usbhsg_uep *uep, - struct usbhsg_request *ureq) -{ - struct usbhsg_gpriv *gpriv = usbhsg_uep_to_gpriv(uep); - struct device *dev = usbhsg_gpriv_to_dev(gpriv); - struct usbhs_pipe *pipe = usbhsg_uep_to_pipe(uep); - struct usbhs_pkt *pkt = usbhsg_ureq_to_pkt(ureq); - struct usb_request *req = &ureq->req; - - req->actual = 0; - req->status = -EINPROGRESS; - usbhs_pkt_push(pipe, pkt, uep->handler, - req->buf, req->length, req->zero); - - dev_dbg(dev, "pipe %d : queue push (%d)\n", - usbhs_pipe_number(pipe), - req->length); -} - static void usbhsg_queue_pop(struct usbhsg_uep *uep, struct usbhsg_request *ureq, int status) @@ -161,7 +141,7 @@ static void usbhsg_queue_pop(struct usbhsg_uep *uep, ureq->req.complete(&uep->ep, &ureq->req); } -static void usbhsg_queue_done(struct usbhs_pkt *pkt) +static void usbhsg_queue_done(struct usbhs_priv *priv, struct usbhs_pkt *pkt) { struct usbhs_pipe *pipe = pkt->pipe; struct usbhsg_uep *uep = usbhsg_pipe_to_uep(pipe); @@ -172,6 +152,26 @@ static void usbhsg_queue_done(struct usbhs_pkt *pkt) usbhsg_queue_pop(uep, ureq, 0); } +static void usbhsg_queue_push(struct usbhsg_uep *uep, + struct usbhsg_request *ureq) +{ + struct usbhsg_gpriv *gpriv = usbhsg_uep_to_gpriv(uep); + struct device *dev = usbhsg_gpriv_to_dev(gpriv); + struct usbhs_pipe *pipe = usbhsg_uep_to_pipe(uep); + struct usbhs_pkt *pkt = usbhsg_ureq_to_pkt(ureq); + struct usb_request *req = &ureq->req; + + req->actual = 0; + req->status = -EINPROGRESS; + usbhs_pkt_push(pipe, pkt, usbhsg_queue_done, + req->buf, req->length, req->zero); + usbhs_pkt_start(pipe); + + dev_dbg(dev, "pipe %d : queue push (%d)\n", + usbhs_pipe_number(pipe), + req->length); +} + /* * dma map/unmap */ @@ -265,7 +265,7 @@ static int usbhsg_recip_handler_std_clear_endpoint(struct usbhs_priv *priv, if (!usbhsg_status_has(gpriv, USBHSG_STATUS_WEDGE)) { usbhs_pipe_disable(pipe); - usbhs_pipe_clear_sequence(pipe); + usbhs_pipe_sequence_data0(pipe); usbhs_pipe_enable(pipe); } @@ -355,7 +355,7 @@ static int usbhsg_irq_dev_state(struct usbhs_priv *priv, struct usbhsg_gpriv *gpriv = usbhsg_priv_to_gpriv(priv); struct device *dev = usbhsg_gpriv_to_dev(gpriv); - gpriv->gadget.speed = usbhs_status_get_usb_speed(irq_state); + gpriv->gadget.speed = usbhs_bus_get_speed(priv); dev_dbg(dev, "state = %x : speed : %d\n", usbhs_status_get_device_state(irq_state), @@ -389,13 +389,13 @@ static int usbhsg_irq_ctrl_stage(struct usbhs_priv *priv, switch (stage) { case READ_DATA_STAGE: - dcp->handler = &usbhs_fifo_pio_push_handler; + pipe->handler = &usbhs_fifo_pio_push_handler; break; case WRITE_DATA_STAGE: - dcp->handler = &usbhs_fifo_pio_pop_handler; + pipe->handler = &usbhs_fifo_pio_pop_handler; break; case NODATA_STATUS_STAGE: - dcp->handler = &usbhs_ctrl_stage_end_handler; + pipe->handler = &usbhs_ctrl_stage_end_handler; break; default: return ret; @@ -479,24 +479,31 @@ static int usbhsg_ep_enable(struct usb_ep *ep, */ if (uep->pipe) { usbhs_pipe_clear(uep->pipe); - usbhs_pipe_clear_sequence(uep->pipe); + usbhs_pipe_sequence_data0(uep->pipe); return 0; } - pipe = usbhs_pipe_malloc(priv, desc); + pipe = usbhs_pipe_malloc(priv, + usb_endpoint_type(desc), + usb_endpoint_dir_in(desc)); if (pipe) { uep->pipe = pipe; pipe->mod_private = uep; + /* set epnum / maxp */ + usbhs_pipe_config_update(pipe, 0, + usb_endpoint_num(desc), + usb_endpoint_maxp(desc)); + /* * usbhs_fifo_dma_push/pop_handler try to * use dmaengine if possible. * It will use pio handler if impossible. */ if (usb_endpoint_dir_in(desc)) - uep->handler = &usbhs_fifo_dma_push_handler; + pipe->handler = &usbhs_fifo_dma_push_handler; else - uep->handler = &usbhs_fifo_dma_pop_handler; + pipe->handler = &usbhs_fifo_dma_pop_handler; ret = 0; } @@ -659,7 +666,6 @@ static int usbhsg_try_start(struct usbhs_priv *priv, u32 status) * pipe initialize and enable DCP */ usbhs_pipe_init(priv, - usbhsg_queue_done, usbhsg_dma_map_ctrl); usbhs_fifo_init(priv); usbhsg_uep_init(gpriv); @@ -667,6 +673,7 @@ static int usbhsg_try_start(struct usbhs_priv *priv, u32 status) /* dcp init */ dcp->pipe = usbhs_dcp_malloc(priv); dcp->pipe->mod_private = dcp; + usbhs_pipe_config_update(dcp->pipe, 0, 0, 64); /* * system config enble @@ -730,10 +737,6 @@ static int usbhsg_try_stop(struct usbhs_priv *priv, u32 status) usbhsg_pipe_disable(dcp); - if (gpriv->driver && - gpriv->driver->disconnect) - gpriv->driver->disconnect(&gpriv->gadget); - dev_dbg(dev, "stop gadget\n"); return 0; @@ -744,31 +747,19 @@ static int usbhsg_try_stop(struct usbhs_priv *priv, u32 status) * linux usb function * */ -static int usbhsg_gadget_start(struct usb_gadget_driver *driver, - int (*bind)(struct usb_gadget *)) +static int usbhsg_gadget_start(struct usb_gadget *gadget, + struct usb_gadget_driver *driver) { - struct usbhsg_gpriv *gpriv; + struct usbhsg_gpriv *gpriv = usbhsg_gadget_to_gpriv(gadget); struct usbhs_priv *priv; struct device *dev; int ret; - if (!bind || - !driver || + if (!driver || !driver->setup || driver->speed != USB_SPEED_HIGH) return -EINVAL; - /* - * find unused controller - */ - usbhsg_for_each_controller(gpriv) { - if (!gpriv->driver) - goto find_unused_controller; - } - return -ENODEV; - -find_unused_controller: - dev = usbhsg_gpriv_to_dev(gpriv); priv = usbhsg_gpriv_to_priv(gpriv); @@ -782,19 +773,8 @@ find_unused_controller: goto add_fail; } - ret = bind(&gpriv->gadget); - if (ret) { - dev_err(dev, "bind to driver %s error %d\n", - driver->driver.name, ret); - goto bind_fail; - } - - dev_dbg(dev, "bind %s\n", driver->driver.name); - return usbhsg_try_start(priv, USBHSG_STATUS_REGISTERD); -bind_fail: - device_del(&gpriv->gadget.dev); add_fail: gpriv->driver = NULL; gpriv->gadget.dev.driver = NULL; @@ -802,9 +782,10 @@ add_fail: return ret; } -static int usbhsg_gadget_stop(struct usb_gadget_driver *driver) +static int usbhsg_gadget_stop(struct usb_gadget *gadget, + struct usb_gadget_driver *driver) { - struct usbhsg_gpriv *gpriv; + struct usbhsg_gpriv *gpriv = usbhsg_gadget_to_gpriv(gadget); struct usbhs_priv *priv; struct device *dev; @@ -812,17 +793,6 @@ static int usbhsg_gadget_stop(struct usb_gadget_driver *driver) !driver->unbind) return -EINVAL; - /* - * find controller - */ - usbhsg_for_each_controller(gpriv) { - if (gpriv->driver == driver) - goto find_matching_controller; - } - return -ENODEV; - -find_matching_controller: - dev = usbhsg_gpriv_to_dev(gpriv); priv = usbhsg_gpriv_to_priv(gpriv); @@ -830,12 +800,6 @@ find_matching_controller: device_del(&gpriv->gadget.dev); gpriv->driver = NULL; - if (driver->disconnect) - driver->disconnect(&gpriv->gadget); - - driver->unbind(&gpriv->gadget); - dev_dbg(dev, "unbind %s\n", driver->driver.name); - return 0; } @@ -852,8 +816,8 @@ static int usbhsg_get_frame(struct usb_gadget *gadget) static struct usb_gadget_ops usbhsg_gadget_ops = { .get_frame = usbhsg_get_frame, - .start = usbhsg_gadget_start, - .stop = usbhsg_gadget_stop, + .udc_start = usbhsg_gadget_start, + .udc_stop = usbhsg_gadget_stop, }; static int usbhsg_start(struct usbhs_priv *priv) diff --git a/drivers/usb/renesas_usbhs/mod_host.c b/drivers/usb/renesas_usbhs/mod_host.c new file mode 100644 index 000000000000..1a7208a50afc --- /dev/null +++ b/drivers/usb/renesas_usbhs/mod_host.c @@ -0,0 +1,1312 @@ +/* + * Renesas USB driver + * + * Copyright (C) 2011 Renesas Solutions Corp. + * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + */ +#include <linux/io.h> +#include <linux/list.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/slab.h> +#include <linux/usb.h> +#include <linux/usb/hcd.h> +#include "common.h" + +/* + *** HARDWARE LIMITATION *** + * + * 1) renesas_usbhs has a limited number of controllable devices. + * it can control only 9 devices in generally. + * see DEVADDn / DCPMAXP / PIPEMAXP. + * + * 2) renesas_usbhs pipe number is limited. + * the pipe will be re-used for each devices. + * so, software should control DATA0/1 sequence of each devices. + */ + + +/* + * image of mod_host + * + * +--------+ + * | udev 0 | --> it is used when set address + * +--------+ + * + * +--------+ pipes are reused for each uep. + * | udev 1 |-+- [uep 0 (dcp) ] --+ pipe will be switched when + * +--------+ | | target device was changed + * +- [uep 1 (bulk)] --|---+ +--------------+ + * | +--------------> | pipe0 (dcp) | + * +- [uep 2 (bulk)] --|---|---+ +--------------+ + * | | | | pipe1 (isoc) | + * +--------+ | | | +--------------+ + * | udev 2 |-+- [uep 0 (dcp) ] --+ +-- |------> | pipe2 (bulk) | + * +--------+ | | | | +--------------+ + * +- [uep 1 (int) ] --|-+ | +------> | pipe3 (bulk) | + * | | | | +--------------+ + * +--------+ | +-|---|------> | pipe4 (int) | + * | udev 3 |-+- [uep 0 (dcp) ] --+ | | +--------------+ + * +--------+ | | | | .... | + * +- [uep 1 (bulk)] ------+ | | .... | + * | | + * +- [uep 2 (bulk)]-----------+ + */ + + +/* + * struct + */ +struct usbhsh_pipe_info { + unsigned int usr_cnt; /* see usbhsh_endpoint_alloc() */ +}; + +struct usbhsh_request { + struct urb *urb; + struct usbhs_pkt pkt; + struct list_head ureq_link; /* see hpriv :: ureq_link_xxx */ +}; + +struct usbhsh_device { + struct usb_device *usbv; + struct list_head ep_list_head; /* list of usbhsh_ep */ +}; + +struct usbhsh_ep { + struct usbhs_pipe *pipe; + struct usbhsh_device *udev; /* attached udev */ + struct list_head ep_list; /* list to usbhsh_device */ + + int maxp; +}; + +#define USBHSH_DEVICE_MAX 10 /* see DEVADDn / DCPMAXP / PIPEMAXP */ +#define USBHSH_PORT_MAX 7 /* see DEVADDn :: HUBPORT */ +struct usbhsh_hpriv { + struct usbhs_mod mod; + struct usbhs_pipe *dcp; + + struct usbhsh_device udev[USBHSH_DEVICE_MAX]; + + struct usbhsh_pipe_info *pipe_info; + int pipe_size; + + u32 port_stat; /* USB_PORT_STAT_xxx */ + + struct completion *done; + + /* see usbhsh_req_alloc/free */ + struct list_head ureq_link_active; + struct list_head ureq_link_free; +}; + + +static const char usbhsh_hcd_name[] = "renesas_usbhs host"; + +/* + * macro + */ +#define usbhsh_priv_to_hpriv(priv) \ + container_of(usbhs_mod_get(priv, USBHS_HOST), struct usbhsh_hpriv, mod) + +#define __usbhsh_for_each_hpipe(start, pos, h, i) \ + for (i = start, pos = (h)->hpipe + i; \ + i < (h)->hpipe_size; \ + i++, pos = (h)->hpipe + i) + +#define usbhsh_for_each_hpipe(pos, hpriv, i) \ + __usbhsh_for_each_hpipe(1, pos, hpriv, i) + +#define usbhsh_for_each_hpipe_with_dcp(pos, hpriv, i) \ + __usbhsh_for_each_hpipe(0, pos, hpriv, i) + +#define __usbhsh_for_each_udev(start, pos, h, i) \ + for (i = start, pos = (h)->udev + i; \ + i < USBHSH_DEVICE_MAX; \ + i++, pos = (h)->udev + i) + +#define usbhsh_for_each_udev(pos, hpriv, i) \ + __usbhsh_for_each_udev(1, pos, hpriv, i) + +#define usbhsh_for_each_udev_with_dev0(pos, hpriv, i) \ + __usbhsh_for_each_udev(0, pos, hpriv, i) + +#define usbhsh_hcd_to_hpriv(h) (struct usbhsh_hpriv *)((h)->hcd_priv) +#define usbhsh_hcd_to_dev(h) ((h)->self.controller) + +#define usbhsh_hpriv_to_priv(h) ((h)->mod.priv) +#define usbhsh_hpriv_to_dcp(h) ((h)->dcp) +#define usbhsh_hpriv_to_hcd(h) \ + container_of((void *)h, struct usb_hcd, hcd_priv) + +#define usbhsh_ep_to_uep(u) ((u)->hcpriv) +#define usbhsh_uep_to_pipe(u) ((u)->pipe) +#define usbhsh_uep_to_udev(u) ((u)->udev) +#define usbhsh_urb_to_ureq(u) ((u)->hcpriv) +#define usbhsh_urb_to_usbv(u) ((u)->dev) + +#define usbhsh_usbv_to_udev(d) dev_get_drvdata(&(d)->dev) + +#define usbhsh_udev_to_usbv(h) ((h)->usbv) + +#define usbhsh_pipe_info(p) ((p)->mod_private) + +#define usbhsh_device_number(h, d) ((int)((d) - (h)->udev)) +#define usbhsh_device_nth(h, d) ((h)->udev + d) +#define usbhsh_device0(h) usbhsh_device_nth(h, 0) + +#define usbhsh_port_stat_init(h) ((h)->port_stat = 0) +#define usbhsh_port_stat_set(h, s) ((h)->port_stat |= (s)) +#define usbhsh_port_stat_clear(h, s) ((h)->port_stat &= ~(s)) +#define usbhsh_port_stat_get(h) ((h)->port_stat) + +#define usbhsh_pkt_to_req(p) \ + container_of((void *)p, struct usbhsh_request, pkt) + +/* + * req alloc/free + */ +static void usbhsh_req_list_init(struct usbhsh_hpriv *hpriv) +{ + INIT_LIST_HEAD(&hpriv->ureq_link_active); + INIT_LIST_HEAD(&hpriv->ureq_link_free); +} + +static void usbhsh_req_list_quit(struct usbhsh_hpriv *hpriv) +{ + struct usb_hcd *hcd = usbhsh_hpriv_to_hcd(hpriv); + struct device *dev = usbhsh_hcd_to_dev(hcd); + struct usbhsh_request *ureq, *next; + + /* kfree all active ureq */ + list_for_each_entry_safe(ureq, next, + &hpriv->ureq_link_active, + ureq_link) { + dev_err(dev, "active ureq (%p) is force freed\n", ureq); + kfree(ureq); + } + + /* kfree all free ureq */ + list_for_each_entry_safe(ureq, next, &hpriv->ureq_link_free, ureq_link) + kfree(ureq); +} + +static struct usbhsh_request *usbhsh_req_alloc(struct usbhsh_hpriv *hpriv, + struct urb *urb, + gfp_t mem_flags) +{ + struct usbhsh_request *ureq; + struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv); + struct device *dev = usbhs_priv_to_dev(priv); + + if (list_empty(&hpriv->ureq_link_free)) { + /* + * create new one if there is no free ureq + */ + ureq = kzalloc(sizeof(struct usbhsh_request), mem_flags); + if (ureq) + INIT_LIST_HEAD(&ureq->ureq_link); + } else { + /* + * reuse "free" ureq if exist + */ + ureq = list_entry(hpriv->ureq_link_free.next, + struct usbhsh_request, + ureq_link); + if (ureq) + list_del_init(&ureq->ureq_link); + } + + if (!ureq) { + dev_err(dev, "ureq alloc fail\n"); + return NULL; + } + + usbhs_pkt_init(&ureq->pkt); + + /* + * push it to "active" list + */ + list_add_tail(&ureq->ureq_link, &hpriv->ureq_link_active); + ureq->urb = urb; + + return ureq; +} + +static void usbhsh_req_free(struct usbhsh_hpriv *hpriv, + struct usbhsh_request *ureq) +{ + struct usbhs_pkt *pkt = &ureq->pkt; + + usbhs_pkt_init(pkt); + + /* + * removed from "active" list, + * and push it to "free" list + */ + ureq->urb = NULL; + list_del_init(&ureq->ureq_link); + list_add_tail(&ureq->ureq_link, &hpriv->ureq_link_free); +} + +/* + * device control + */ + +static int usbhsh_device_has_endpoint(struct usbhsh_device *udev) +{ + return !list_empty(&udev->ep_list_head); +} + +static struct usbhsh_device *usbhsh_device_alloc(struct usbhsh_hpriv *hpriv, + struct urb *urb) +{ + struct usbhsh_device *udev = NULL; + struct usb_hcd *hcd = usbhsh_hpriv_to_hcd(hpriv); + struct device *dev = usbhsh_hcd_to_dev(hcd); + struct usb_device *usbv = usbhsh_urb_to_usbv(urb); + struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv); + int i; + + /* + * device 0 + */ + if (0 == usb_pipedevice(urb->pipe)) { + udev = usbhsh_device0(hpriv); + goto usbhsh_device_find; + } + + /* + * find unused device + */ + usbhsh_for_each_udev(udev, hpriv, i) { + if (usbhsh_udev_to_usbv(udev)) + continue; + goto usbhsh_device_find; + } + + dev_err(dev, "no free usbhsh_device\n"); + + return NULL; + +usbhsh_device_find: + if (usbhsh_device_has_endpoint(udev)) + dev_warn(dev, "udev have old endpoint\n"); + + /* uep will be attached */ + INIT_LIST_HEAD(&udev->ep_list_head); + + /* + * usbhsh_usbv_to_udev() + * usbhsh_udev_to_usbv() + * will be enable + */ + dev_set_drvdata(&usbv->dev, udev); + udev->usbv = usbv; + + /* set device config */ + usbhs_set_device_speed(priv, + usbhsh_device_number(hpriv, udev), + usbhsh_device_number(hpriv, udev), + 0, /* FIXME no parent */ + usbv->speed); + + dev_dbg(dev, "%s [%d](%p)\n", __func__, + usbhsh_device_number(hpriv, udev), udev); + + return udev; +} + +static void usbhsh_device_free(struct usbhsh_hpriv *hpriv, + struct usbhsh_device *udev) +{ + struct usb_hcd *hcd = usbhsh_hpriv_to_hcd(hpriv); + struct device *dev = usbhsh_hcd_to_dev(hcd); + struct usb_device *usbv = usbhsh_udev_to_usbv(udev); + + dev_dbg(dev, "%s [%d](%p)\n", __func__, + usbhsh_device_number(hpriv, udev), udev); + + if (usbhsh_device_has_endpoint(udev)) + dev_warn(dev, "udev still have endpoint\n"); + + /* + * usbhsh_usbv_to_udev() + * usbhsh_udev_to_usbv() + * will be disable + */ + dev_set_drvdata(&usbv->dev, NULL); + udev->usbv = NULL; +} + +/* + * end-point control + */ +struct usbhsh_ep *usbhsh_endpoint_alloc(struct usbhsh_hpriv *hpriv, + struct usbhsh_device *udev, + struct usb_host_endpoint *ep, + gfp_t mem_flags) +{ + struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv); + struct usb_hcd *hcd = usbhsh_hpriv_to_hcd(hpriv); + struct usbhsh_ep *uep; + struct usbhsh_pipe_info *info; + struct usbhs_pipe *pipe, *best_pipe; + struct device *dev = usbhsh_hcd_to_dev(hcd); + struct usb_endpoint_descriptor *desc = &ep->desc; + int type, i; + unsigned int min_usr; + + uep = kzalloc(sizeof(struct usbhsh_ep), mem_flags); + if (!uep) { + dev_err(dev, "usbhsh_ep alloc fail\n"); + return NULL; + } + type = usb_endpoint_type(desc); + + /* + * find best pipe for endpoint + * see + * HARDWARE LIMITATION + */ + min_usr = ~0; + best_pipe = NULL; + usbhs_for_each_pipe_with_dcp(pipe, priv, i) { + if (!usbhs_pipe_type_is(pipe, type)) + continue; + + info = usbhsh_pipe_info(pipe); + + if (min_usr > info->usr_cnt) { + min_usr = info->usr_cnt; + best_pipe = pipe; + } + } + + if (unlikely(!best_pipe)) { + dev_err(dev, "couldn't find best pipe\n"); + kfree(uep); + return NULL; + } + + /* + * init uep + */ + uep->pipe = best_pipe; + uep->maxp = usb_endpoint_maxp(desc); + usbhsh_uep_to_udev(uep) = udev; + usbhsh_ep_to_uep(ep) = uep; + + /* + * update pipe user count + */ + info = usbhsh_pipe_info(best_pipe); + info->usr_cnt++; + + /* init this endpoint, and attach it to udev */ + INIT_LIST_HEAD(&uep->ep_list); + list_add_tail(&uep->ep_list, &udev->ep_list_head); + + /* + * usbhs_pipe_config_update() should be called after + * usbhs_device_config() + * see + * DCPMAXP/PIPEMAXP + */ + usbhs_pipe_config_update(uep->pipe, + usbhsh_device_number(hpriv, udev), + usb_endpoint_num(desc), + uep->maxp); + + dev_dbg(dev, "%s [%d-%s](%p)\n", __func__, + usbhsh_device_number(hpriv, udev), + usbhs_pipe_name(pipe), uep); + + return uep; +} + +void usbhsh_endpoint_free(struct usbhsh_hpriv *hpriv, + struct usb_host_endpoint *ep) +{ + struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv); + struct device *dev = usbhs_priv_to_dev(priv); + struct usbhsh_ep *uep = usbhsh_ep_to_uep(ep); + struct usbhsh_pipe_info *info; + + if (!uep) + return; + + dev_dbg(dev, "%s [%d-%s](%p)\n", __func__, + usbhsh_device_number(hpriv, usbhsh_uep_to_udev(uep)), + usbhs_pipe_name(uep->pipe), uep); + + info = usbhsh_pipe_info(uep->pipe); + info->usr_cnt--; + + /* remove this endpoint from udev */ + list_del_init(&uep->ep_list); + + usbhsh_uep_to_udev(uep) = NULL; + usbhsh_ep_to_uep(ep) = NULL; + + kfree(uep); +} + +/* + * queue push/pop + */ +static void usbhsh_queue_done(struct usbhs_priv *priv, struct usbhs_pkt *pkt) +{ + struct usbhsh_request *ureq = usbhsh_pkt_to_req(pkt); + struct usbhsh_hpriv *hpriv = usbhsh_priv_to_hpriv(priv); + struct usb_hcd *hcd = usbhsh_hpriv_to_hcd(hpriv); + struct urb *urb = ureq->urb; + struct device *dev = usbhs_priv_to_dev(priv); + + dev_dbg(dev, "%s\n", __func__); + + if (!urb) { + dev_warn(dev, "pkt doesn't have urb\n"); + return; + } + + urb->actual_length = pkt->actual; + usbhsh_req_free(hpriv, ureq); + usbhsh_urb_to_ureq(urb) = NULL; + + usb_hcd_unlink_urb_from_ep(hcd, urb); + usb_hcd_giveback_urb(hcd, urb, 0); +} + +static int usbhsh_queue_push(struct usb_hcd *hcd, + struct usbhs_pipe *pipe, + struct urb *urb) +{ + struct usbhsh_request *ureq = usbhsh_urb_to_ureq(urb); + struct usbhs_pkt *pkt = &ureq->pkt; + struct device *dev = usbhsh_hcd_to_dev(hcd); + void *buf; + int len; + + if (usb_pipeisoc(urb->pipe)) { + dev_err(dev, "pipe iso is not supported now\n"); + return -EIO; + } + + if (usb_pipein(urb->pipe)) + pipe->handler = &usbhs_fifo_pio_pop_handler; + else + pipe->handler = &usbhs_fifo_pio_push_handler; + + buf = (void *)(urb->transfer_buffer + urb->actual_length); + len = urb->transfer_buffer_length - urb->actual_length; + + dev_dbg(dev, "%s\n", __func__); + usbhs_pkt_push(pipe, pkt, usbhsh_queue_done, + buf, len, (urb->transfer_flags & URB_ZERO_PACKET)); + usbhs_pkt_start(pipe); + + return 0; +} + +/* + * DCP setup stage + */ +static int usbhsh_is_request_address(struct urb *urb) +{ + struct usb_ctrlrequest *cmd; + + cmd = (struct usb_ctrlrequest *)urb->setup_packet; + + if ((DeviceOutRequest == cmd->bRequestType << 8) && + (USB_REQ_SET_ADDRESS == cmd->bRequest)) + return 1; + else + return 0; +} + +static void usbhsh_setup_stage_packet_push(struct usbhsh_hpriv *hpriv, + struct urb *urb, + struct usbhs_pipe *pipe) +{ + struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv); + struct usb_ctrlrequest req; + struct device *dev = usbhs_priv_to_dev(priv); + + /* + * wait setup packet ACK + * see + * usbhsh_irq_setup_ack() + * usbhsh_irq_setup_err() + */ + DECLARE_COMPLETION(done); + hpriv->done = &done; + + /* copy original request */ + memcpy(&req, urb->setup_packet, sizeof(struct usb_ctrlrequest)); + + /* + * renesas_usbhs can not use original usb address. + * see HARDWARE LIMITATION. + * modify usb address here. + */ + if (usbhsh_is_request_address(urb)) { + /* FIXME */ + req.wValue = 1; + dev_dbg(dev, "create new address - %d\n", req.wValue); + } + + /* set request */ + usbhs_usbreq_set_val(priv, &req); + + /* + * wait setup packet ACK + */ + wait_for_completion(&done); + hpriv->done = NULL; + + dev_dbg(dev, "%s done\n", __func__); +} + +/* + * DCP data stage + */ +static void usbhsh_data_stage_packet_done(struct usbhs_priv *priv, + struct usbhs_pkt *pkt) +{ + struct usbhsh_request *ureq = usbhsh_pkt_to_req(pkt); + struct usbhsh_hpriv *hpriv = usbhsh_priv_to_hpriv(priv); + struct urb *urb = ureq->urb; + + /* this ureq was connected to urb when usbhsh_urb_enqueue() */ + + usbhsh_req_free(hpriv, ureq); + usbhsh_urb_to_ureq(urb) = NULL; +} + +static void usbhsh_data_stage_packet_push(struct usbhsh_hpriv *hpriv, + struct urb *urb, + struct usbhs_pipe *pipe) +{ + struct usbhsh_request *ureq; + struct usbhs_pkt *pkt; + + /* + * FIXME + * + * data stage uses ureq which is connected to urb + * see usbhsh_urb_enqueue() :: alloc new request. + * it will be freed in usbhsh_data_stage_packet_done() + */ + ureq = usbhsh_urb_to_ureq(urb); + pkt = &ureq->pkt; + + if (usb_pipein(urb->pipe)) + pipe->handler = &usbhs_dcp_data_stage_in_handler; + else + pipe->handler = &usbhs_dcp_data_stage_out_handler; + + usbhs_pkt_push(pipe, pkt, + usbhsh_data_stage_packet_done, + urb->transfer_buffer, + urb->transfer_buffer_length, + (urb->transfer_flags & URB_ZERO_PACKET)); +} + +/* + * DCP status stage + */ +static void usbhsh_status_stage_packet_push(struct usbhsh_hpriv *hpriv, + struct urb *urb, + struct usbhs_pipe *pipe) +{ + struct usbhsh_request *ureq; + struct usbhs_pkt *pkt; + + /* + * FIXME + * + * status stage uses allocated ureq. + * it will be freed on usbhsh_queue_done() + */ + ureq = usbhsh_req_alloc(hpriv, urb, GFP_KERNEL); + pkt = &ureq->pkt; + + if (usb_pipein(urb->pipe)) + pipe->handler = &usbhs_dcp_status_stage_in_handler; + else + pipe->handler = &usbhs_dcp_status_stage_out_handler; + + usbhs_pkt_push(pipe, pkt, + usbhsh_queue_done, + NULL, + urb->transfer_buffer_length, + 0); +} + +static int usbhsh_dcp_queue_push(struct usb_hcd *hcd, + struct usbhsh_hpriv *hpriv, + struct usbhs_pipe *pipe, + struct urb *urb) +{ + struct device *dev = usbhsh_hcd_to_dev(hcd); + + dev_dbg(dev, "%s\n", __func__); + + /* + * setup stage + * + * usbhsh_send_setup_stage_packet() wait SACK/SIGN + */ + usbhsh_setup_stage_packet_push(hpriv, urb, pipe); + + /* + * data stage + * + * It is pushed only when urb has buffer. + */ + if (urb->transfer_buffer_length) + usbhsh_data_stage_packet_push(hpriv, urb, pipe); + + /* + * status stage + */ + usbhsh_status_stage_packet_push(hpriv, urb, pipe); + + /* + * start pushed packets + */ + usbhs_pkt_start(pipe); + + return 0; +} + +/* + * dma map functions + */ +static int usbhsh_dma_map_ctrl(struct usbhs_pkt *pkt, int map) +{ + return 0; +} + +/* + * for hc_driver + */ +static int usbhsh_host_start(struct usb_hcd *hcd) +{ + return 0; +} + +static void usbhsh_host_stop(struct usb_hcd *hcd) +{ +} + +static int usbhsh_urb_enqueue(struct usb_hcd *hcd, + struct urb *urb, + gfp_t mem_flags) +{ + struct usbhsh_hpriv *hpriv = usbhsh_hcd_to_hpriv(hcd); + struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv); + struct device *dev = usbhs_priv_to_dev(priv); + struct usb_device *usbv = usbhsh_urb_to_usbv(urb); + struct usb_host_endpoint *ep = urb->ep; + struct usbhsh_request *ureq; + struct usbhsh_device *udev, *new_udev = NULL; + struct usbhs_pipe *pipe; + struct usbhsh_ep *uep; + + int ret; + + dev_dbg(dev, "%s (%s)\n", + __func__, usb_pipein(urb->pipe) ? "in" : "out"); + + ret = usb_hcd_link_urb_to_ep(hcd, urb); + if (ret) + goto usbhsh_urb_enqueue_error_not_linked; + + /* + * get udev + */ + udev = usbhsh_usbv_to_udev(usbv); + if (!udev) { + new_udev = usbhsh_device_alloc(hpriv, urb); + if (!new_udev) + goto usbhsh_urb_enqueue_error_not_linked; + + udev = new_udev; + } + + /* + * get uep + */ + uep = usbhsh_ep_to_uep(ep); + if (!uep) { + uep = usbhsh_endpoint_alloc(hpriv, udev, ep, mem_flags); + if (!uep) + goto usbhsh_urb_enqueue_error_free_device; + } + pipe = usbhsh_uep_to_pipe(uep); + + /* + * alloc new request + */ + ureq = usbhsh_req_alloc(hpriv, urb, mem_flags); + if (unlikely(!ureq)) { + ret = -ENOMEM; + goto usbhsh_urb_enqueue_error_free_endpoint; + } + usbhsh_urb_to_ureq(urb) = ureq; + + /* + * push packet + */ + if (usb_pipecontrol(urb->pipe)) + usbhsh_dcp_queue_push(hcd, hpriv, pipe, urb); + else + usbhsh_queue_push(hcd, pipe, urb); + + return 0; + +usbhsh_urb_enqueue_error_free_endpoint: + usbhsh_endpoint_free(hpriv, ep); +usbhsh_urb_enqueue_error_free_device: + if (new_udev) + usbhsh_device_free(hpriv, new_udev); +usbhsh_urb_enqueue_error_not_linked: + + dev_dbg(dev, "%s error\n", __func__); + + return ret; +} + +static int usbhsh_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) +{ + struct usbhsh_hpriv *hpriv = usbhsh_hcd_to_hpriv(hcd); + struct usbhsh_request *ureq = usbhsh_urb_to_ureq(urb); + + if (ureq) { + usbhsh_req_free(hpriv, ureq); + usbhsh_urb_to_ureq(urb) = NULL; + } + + return 0; +} + +static void usbhsh_endpoint_disable(struct usb_hcd *hcd, + struct usb_host_endpoint *ep) +{ + struct usbhsh_ep *uep = usbhsh_ep_to_uep(ep); + struct usbhsh_device *udev; + struct usbhsh_hpriv *hpriv; + + /* + * this function might be called manytimes by same hcd/ep + * in-endpoitn == out-endpoint if ep == dcp. + */ + if (!uep) + return; + + udev = usbhsh_uep_to_udev(uep); + hpriv = usbhsh_hcd_to_hpriv(hcd); + + usbhsh_endpoint_free(hpriv, ep); + ep->hcpriv = NULL; + + /* + * if there is no endpoint, + * free device + */ + if (!usbhsh_device_has_endpoint(udev)) + usbhsh_device_free(hpriv, udev); +} + +static int usbhsh_hub_status_data(struct usb_hcd *hcd, char *buf) +{ + struct usbhsh_hpriv *hpriv = usbhsh_hcd_to_hpriv(hcd); + struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv); + struct device *dev = usbhs_priv_to_dev(priv); + int roothub_id = 1; /* only 1 root hub */ + + /* + * does port stat was changed ? + * check USB_PORT_STAT_C_xxx << 16 + */ + if (usbhsh_port_stat_get(hpriv) & 0xFFFF0000) + *buf = (1 << roothub_id); + else + *buf = 0; + + dev_dbg(dev, "%s (%02x)\n", __func__, *buf); + + return !!(*buf); +} + +static int __usbhsh_hub_hub_feature(struct usbhsh_hpriv *hpriv, + u16 typeReq, u16 wValue, + u16 wIndex, char *buf, u16 wLength) +{ + struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv); + struct device *dev = usbhs_priv_to_dev(priv); + + switch (wValue) { + case C_HUB_OVER_CURRENT: + case C_HUB_LOCAL_POWER: + dev_dbg(dev, "%s :: C_HUB_xx\n", __func__); + return 0; + } + + return -EPIPE; +} + +static int __usbhsh_hub_port_feature(struct usbhsh_hpriv *hpriv, + u16 typeReq, u16 wValue, + u16 wIndex, char *buf, u16 wLength) +{ + struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv); + struct device *dev = usbhs_priv_to_dev(priv); + int enable = (typeReq == SetPortFeature); + int speed, i, timeout = 128; + int roothub_id = 1; /* only 1 root hub */ + + /* common error */ + if (wIndex > roothub_id || wLength != 0) + return -EPIPE; + + /* check wValue */ + switch (wValue) { + case USB_PORT_FEAT_POWER: + usbhs_vbus_ctrl(priv, enable); + dev_dbg(dev, "%s :: USB_PORT_FEAT_POWER\n", __func__); + break; + + case USB_PORT_FEAT_ENABLE: + case USB_PORT_FEAT_SUSPEND: + case USB_PORT_FEAT_C_ENABLE: + case USB_PORT_FEAT_C_SUSPEND: + case USB_PORT_FEAT_C_CONNECTION: + case USB_PORT_FEAT_C_OVER_CURRENT: + case USB_PORT_FEAT_C_RESET: + dev_dbg(dev, "%s :: USB_PORT_FEAT_xxx\n", __func__); + break; + + case USB_PORT_FEAT_RESET: + if (!enable) + break; + + usbhsh_port_stat_clear(hpriv, + USB_PORT_STAT_HIGH_SPEED | + USB_PORT_STAT_LOW_SPEED); + + usbhs_bus_send_reset(priv); + msleep(20); + usbhs_bus_send_sof_enable(priv); + + for (i = 0; i < timeout ; i++) { + switch (usbhs_bus_get_speed(priv)) { + case USB_SPEED_LOW: + speed = USB_PORT_STAT_LOW_SPEED; + goto got_usb_bus_speed; + case USB_SPEED_HIGH: + speed = USB_PORT_STAT_HIGH_SPEED; + goto got_usb_bus_speed; + case USB_SPEED_FULL: + speed = 0; + goto got_usb_bus_speed; + } + + msleep(20); + } + return -EPIPE; + +got_usb_bus_speed: + usbhsh_port_stat_set(hpriv, speed); + usbhsh_port_stat_set(hpriv, USB_PORT_STAT_ENABLE); + + dev_dbg(dev, "%s :: USB_PORT_FEAT_RESET (speed = %d)\n", + __func__, speed); + + /* status change is not needed */ + return 0; + + default: + return -EPIPE; + } + + /* set/clear status */ + if (enable) + usbhsh_port_stat_set(hpriv, (1 << wValue)); + else + usbhsh_port_stat_clear(hpriv, (1 << wValue)); + + return 0; +} + +static int __usbhsh_hub_get_status(struct usbhsh_hpriv *hpriv, + u16 typeReq, u16 wValue, + u16 wIndex, char *buf, u16 wLength) +{ + struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv); + struct usb_hub_descriptor *desc = (struct usb_hub_descriptor *)buf; + struct device *dev = usbhs_priv_to_dev(priv); + int roothub_id = 1; /* only 1 root hub */ + + switch (typeReq) { + case GetHubStatus: + dev_dbg(dev, "%s :: GetHubStatus\n", __func__); + + *buf = 0x00; + break; + + case GetPortStatus: + if (wIndex != roothub_id) + return -EPIPE; + + dev_dbg(dev, "%s :: GetPortStatus\n", __func__); + *(__le32 *)buf = cpu_to_le32(usbhsh_port_stat_get(hpriv)); + break; + + case GetHubDescriptor: + desc->bDescriptorType = 0x29; + desc->bHubContrCurrent = 0; + desc->bNbrPorts = roothub_id; + desc->bDescLength = 9; + desc->bPwrOn2PwrGood = 0; + desc->wHubCharacteristics = cpu_to_le16(0x0011); + desc->u.hs.DeviceRemovable[0] = (roothub_id << 1); + desc->u.hs.DeviceRemovable[1] = ~0; + dev_dbg(dev, "%s :: GetHubDescriptor\n", __func__); + break; + } + + return 0; +} + +static int usbhsh_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, + u16 wIndex, char *buf, u16 wLength) +{ + struct usbhsh_hpriv *hpriv = usbhsh_hcd_to_hpriv(hcd); + struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv); + struct device *dev = usbhs_priv_to_dev(priv); + int ret = -EPIPE; + + switch (typeReq) { + + /* Hub Feature */ + case ClearHubFeature: + case SetHubFeature: + ret = __usbhsh_hub_hub_feature(hpriv, typeReq, + wValue, wIndex, buf, wLength); + break; + + /* Port Feature */ + case SetPortFeature: + case ClearPortFeature: + ret = __usbhsh_hub_port_feature(hpriv, typeReq, + wValue, wIndex, buf, wLength); + break; + + /* Get status */ + case GetHubStatus: + case GetPortStatus: + case GetHubDescriptor: + ret = __usbhsh_hub_get_status(hpriv, typeReq, + wValue, wIndex, buf, wLength); + break; + } + + dev_dbg(dev, "typeReq = %x, ret = %d, port_stat = %x\n", + typeReq, ret, usbhsh_port_stat_get(hpriv)); + + return ret; +} + +static struct hc_driver usbhsh_driver = { + .description = usbhsh_hcd_name, + .hcd_priv_size = sizeof(struct usbhsh_hpriv), + + /* + * generic hardware linkage + */ + .flags = HCD_USB2, + + .start = usbhsh_host_start, + .stop = usbhsh_host_stop, + + /* + * managing i/o requests and associated device resources + */ + .urb_enqueue = usbhsh_urb_enqueue, + .urb_dequeue = usbhsh_urb_dequeue, + .endpoint_disable = usbhsh_endpoint_disable, + + /* + * root hub + */ + .hub_status_data = usbhsh_hub_status_data, + .hub_control = usbhsh_hub_control, +}; + +/* + * interrupt functions + */ +static int usbhsh_irq_attch(struct usbhs_priv *priv, + struct usbhs_irq_state *irq_state) +{ + struct usbhsh_hpriv *hpriv = usbhsh_priv_to_hpriv(priv); + struct device *dev = usbhs_priv_to_dev(priv); + + dev_dbg(dev, "device attached\n"); + + usbhsh_port_stat_set(hpriv, USB_PORT_STAT_CONNECTION); + usbhsh_port_stat_set(hpriv, USB_PORT_STAT_C_CONNECTION << 16); + + return 0; +} + +static int usbhsh_irq_dtch(struct usbhs_priv *priv, + struct usbhs_irq_state *irq_state) +{ + struct usbhsh_hpriv *hpriv = usbhsh_priv_to_hpriv(priv); + struct device *dev = usbhs_priv_to_dev(priv); + + dev_dbg(dev, "device detached\n"); + + usbhsh_port_stat_clear(hpriv, USB_PORT_STAT_CONNECTION); + usbhsh_port_stat_set(hpriv, USB_PORT_STAT_C_CONNECTION << 16); + + return 0; +} + +static int usbhsh_irq_setup_ack(struct usbhs_priv *priv, + struct usbhs_irq_state *irq_state) +{ + struct usbhsh_hpriv *hpriv = usbhsh_priv_to_hpriv(priv); + struct device *dev = usbhs_priv_to_dev(priv); + + dev_dbg(dev, "setup packet OK\n"); + + if (unlikely(!hpriv->done)) + dev_err(dev, "setup ack happen without necessary data\n"); + else + complete(hpriv->done); /* see usbhsh_urb_enqueue() */ + + return 0; +} + +static int usbhsh_irq_setup_err(struct usbhs_priv *priv, + struct usbhs_irq_state *irq_state) +{ + struct usbhsh_hpriv *hpriv = usbhsh_priv_to_hpriv(priv); + struct device *dev = usbhs_priv_to_dev(priv); + + dev_dbg(dev, "setup packet Err\n"); + + if (unlikely(!hpriv->done)) + dev_err(dev, "setup err happen without necessary data\n"); + else + complete(hpriv->done); /* see usbhsh_urb_enqueue() */ + + return 0; +} + +/* + * module start/stop + */ +static void usbhsh_pipe_init_for_host(struct usbhs_priv *priv) +{ + struct usbhsh_hpriv *hpriv = usbhsh_priv_to_hpriv(priv); + struct usbhsh_pipe_info *pipe_info = hpriv->pipe_info; + struct usbhs_pipe *pipe; + u32 *pipe_type = usbhs_get_dparam(priv, pipe_type); + int pipe_size = usbhs_get_dparam(priv, pipe_size); + int old_type, dir_in, i; + + /* init all pipe */ + old_type = USB_ENDPOINT_XFER_CONTROL; + for (i = 0; i < pipe_size; i++) { + pipe_info[i].usr_cnt = 0; + + /* + * data "output" will be finished as soon as possible, + * but there is no guaranty at data "input" case. + * + * "input" needs "standby" pipe. + * So, "input" direction pipe > "output" direction pipe + * is good idea. + * + * 1st USB_ENDPOINT_XFER_xxx will be output direction, + * and the other will be input direction here. + * + * ex) + * ... + * USB_ENDPOINT_XFER_ISOC -> dir out + * USB_ENDPOINT_XFER_ISOC -> dir in + * USB_ENDPOINT_XFER_BULK -> dir out + * USB_ENDPOINT_XFER_BULK -> dir in + * USB_ENDPOINT_XFER_BULK -> dir in + * ... + */ + dir_in = (pipe_type[i] == old_type); + old_type = pipe_type[i]; + + if (USB_ENDPOINT_XFER_CONTROL == pipe_type[i]) { + pipe = usbhs_dcp_malloc(priv); + usbhsh_hpriv_to_dcp(hpriv) = pipe; + } else { + pipe = usbhs_pipe_malloc(priv, + pipe_type[i], + dir_in); + } + + pipe->mod_private = pipe_info + i; + } +} + +static int usbhsh_start(struct usbhs_priv *priv) +{ + struct usbhsh_hpriv *hpriv = usbhsh_priv_to_hpriv(priv); + struct usb_hcd *hcd = usbhsh_hpriv_to_hcd(hpriv); + struct usbhs_mod *mod = usbhs_mod_get_current(priv); + struct device *dev = usbhs_priv_to_dev(priv); + int ret; + + /* add hcd */ + ret = usb_add_hcd(hcd, 0, 0); + if (ret < 0) + return 0; + + /* + * pipe initialize and enable DCP + */ + usbhs_pipe_init(priv, + usbhsh_dma_map_ctrl); + usbhs_fifo_init(priv); + usbhsh_pipe_init_for_host(priv); + + /* + * system config enble + * - HI speed + * - host + * - usb module + */ + usbhs_sys_hispeed_ctrl(priv, 1); + usbhs_sys_host_ctrl(priv, 1); + usbhs_sys_usb_ctrl(priv, 1); + + /* + * enable irq callback + */ + mod->irq_attch = usbhsh_irq_attch; + mod->irq_dtch = usbhsh_irq_dtch; + mod->irq_sack = usbhsh_irq_setup_ack; + mod->irq_sign = usbhsh_irq_setup_err; + usbhs_irq_callback_update(priv, mod); + + dev_dbg(dev, "start host\n"); + + return ret; +} + +static int usbhsh_stop(struct usbhs_priv *priv) +{ + struct usbhsh_hpriv *hpriv = usbhsh_priv_to_hpriv(priv); + struct usb_hcd *hcd = usbhsh_hpriv_to_hcd(hpriv); + struct device *dev = usbhs_priv_to_dev(priv); + + usb_remove_hcd(hcd); + + /* disable sys */ + usbhs_sys_hispeed_ctrl(priv, 0); + usbhs_sys_host_ctrl(priv, 0); + usbhs_sys_usb_ctrl(priv, 0); + + dev_dbg(dev, "quit host\n"); + + return 0; +} + +int __devinit usbhs_mod_host_probe(struct usbhs_priv *priv) +{ + struct usbhsh_hpriv *hpriv; + struct usb_hcd *hcd; + struct usbhsh_pipe_info *pipe_info; + struct usbhsh_device *udev; + struct device *dev = usbhs_priv_to_dev(priv); + int pipe_size = usbhs_get_dparam(priv, pipe_size); + int i; + + /* initialize hcd */ + hcd = usb_create_hcd(&usbhsh_driver, dev, usbhsh_hcd_name); + if (!hcd) { + dev_err(dev, "Failed to create hcd\n"); + return -ENOMEM; + } + + pipe_info = kzalloc(sizeof(*pipe_info) * pipe_size, GFP_KERNEL); + if (!pipe_info) { + dev_err(dev, "Could not allocate pipe_info\n"); + goto usbhs_mod_host_probe_err; + } + + /* + * CAUTION + * + * There is no guarantee that it is possible to access usb module here. + * Don't accesses to it. + * The accesse will be enable after "usbhsh_start" + */ + + hpriv = usbhsh_hcd_to_hpriv(hcd); + + /* + * register itself + */ + usbhs_mod_register(priv, &hpriv->mod, USBHS_HOST); + + /* init hpriv */ + hpriv->mod.name = "host"; + hpriv->mod.start = usbhsh_start; + hpriv->mod.stop = usbhsh_stop; + hpriv->pipe_info = pipe_info; + hpriv->pipe_size = pipe_size; + hpriv->done = NULL; + usbhsh_req_list_init(hpriv); + usbhsh_port_stat_init(hpriv); + + /* init all device */ + usbhsh_for_each_udev_with_dev0(udev, hpriv, i) { + udev->usbv = NULL; + INIT_LIST_HEAD(&udev->ep_list_head); + } + + dev_info(dev, "host probed\n"); + + return 0; + +usbhs_mod_host_probe_err: + usb_put_hcd(hcd); + + return -ENOMEM; +} + +int __devexit usbhs_mod_host_remove(struct usbhs_priv *priv) +{ + struct usbhsh_hpriv *hpriv = usbhsh_priv_to_hpriv(priv); + struct usb_hcd *hcd = usbhsh_hpriv_to_hcd(hpriv); + + usbhsh_req_list_quit(hpriv); + + usb_put_hcd(hcd); + + return 0; +} diff --git a/drivers/usb/renesas_usbhs/pipe.c b/drivers/usb/renesas_usbhs/pipe.c index 1b14cae45704..c74389ce2177 100644 --- a/drivers/usb/renesas_usbhs/pipe.c +++ b/drivers/usb/renesas_usbhs/pipe.c @@ -29,9 +29,6 @@ #define usbhsp_flags_has(p, f) ((p)->flags & USBHS_PIPE_FLAGS_##f) #define usbhsp_flags_init(p) do {(p)->flags = 0; } while (0) -#define usbhsp_type(p) ((p)->pipe_type) -#define usbhsp_type_is(p, t) ((p)->pipe_type == t) - /* * for debug */ @@ -42,28 +39,9 @@ static char *usbhsp_pipe_name[] = { [USB_ENDPOINT_XFER_ISOC] = "ISO", }; -/* - * usb request functions - */ -void usbhs_usbreq_get_val(struct usbhs_priv *priv, struct usb_ctrlrequest *req) +char *usbhs_pipe_name(struct usbhs_pipe *pipe) { - u16 val; - - val = usbhs_read(priv, USBREQ); - req->bRequest = (val >> 8) & 0xFF; - req->bRequestType = (val >> 0) & 0xFF; - - req->wValue = usbhs_read(priv, USBVAL); - req->wIndex = usbhs_read(priv, USBINDX); - req->wLength = usbhs_read(priv, USBLENG); -} - -void usbhs_usbreq_set_val(struct usbhs_priv *priv, struct usb_ctrlrequest *req) -{ - usbhs_write(priv, USBREQ, (req->bRequest << 8) | req->bRequestType); - usbhs_write(priv, USBVAL, req->wValue); - usbhs_write(priv, USBINDX, req->wIndex); - usbhs_write(priv, USBLENG, req->wLength); + return usbhsp_pipe_name[usbhs_pipe_type(pipe)]; } /* @@ -106,17 +84,6 @@ static void __usbhsp_pipe_xxx_set(struct usbhs_pipe *pipe, usbhs_bset(priv, pipe_reg, mask, val); } -static u16 __usbhsp_pipe_xxx_get(struct usbhs_pipe *pipe, - u16 dcp_reg, u16 pipe_reg) -{ - struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); - - if (usbhs_pipe_is_dcp(pipe)) - return usbhs_read(priv, dcp_reg); - else - return usbhs_read(priv, pipe_reg); -} - /* * DCPCFG/PIPECFG functions */ @@ -144,11 +111,6 @@ static void usbhsp_pipe_maxp_set(struct usbhs_pipe *pipe, u16 mask, u16 val) __usbhsp_pipe_xxx_set(pipe, DCPMAXP, PIPEMAXP, mask, val); } -static u16 usbhsp_pipe_maxp_get(struct usbhs_pipe *pipe) -{ - return __usbhsp_pipe_xxx_get(pipe, DCPMAXP, PIPEMAXP); -} - /* * pipe control functions */ @@ -303,16 +265,16 @@ static int usbhsp_possible_double_buffer(struct usbhs_pipe *pipe) /* * only ISO / BULK pipe can use double buffer */ - if (usbhsp_type_is(pipe, USB_ENDPOINT_XFER_BULK) || - usbhsp_type_is(pipe, USB_ENDPOINT_XFER_ISOC)) + if (usbhs_pipe_type_is(pipe, USB_ENDPOINT_XFER_BULK) || + usbhs_pipe_type_is(pipe, USB_ENDPOINT_XFER_ISOC)) return 1; return 0; } static u16 usbhsp_setup_pipecfg(struct usbhs_pipe *pipe, - const struct usb_endpoint_descriptor *desc, - int is_host) + int is_host, + int dir_in) { u16 type = 0; u16 bfre = 0; @@ -341,40 +303,40 @@ static u16 usbhsp_setup_pipecfg(struct usbhs_pipe *pipe, */ /* TYPE */ - type = type_array[usbhsp_type(pipe)]; + type = type_array[usbhs_pipe_type(pipe)]; /* BFRE */ - if (usbhsp_type_is(pipe, USB_ENDPOINT_XFER_ISOC) || - usbhsp_type_is(pipe, USB_ENDPOINT_XFER_BULK)) + if (usbhs_pipe_type_is(pipe, USB_ENDPOINT_XFER_ISOC) || + usbhs_pipe_type_is(pipe, USB_ENDPOINT_XFER_BULK)) bfre = 0; /* FIXME */ /* DBLB */ - if (usbhsp_type_is(pipe, USB_ENDPOINT_XFER_ISOC) || - usbhsp_type_is(pipe, USB_ENDPOINT_XFER_BULK)) + if (usbhs_pipe_type_is(pipe, USB_ENDPOINT_XFER_ISOC) || + usbhs_pipe_type_is(pipe, USB_ENDPOINT_XFER_BULK)) dblb = (is_double) ? DBLB : 0; /* CNTMD */ - if (usbhsp_type_is(pipe, USB_ENDPOINT_XFER_BULK)) + if (usbhs_pipe_type_is(pipe, USB_ENDPOINT_XFER_BULK)) cntmd = 0; /* FIXME */ /* DIR */ - if (usb_endpoint_dir_in(desc)) + if (dir_in) usbhsp_flags_set(pipe, IS_DIR_HOST); - if ((is_host && usb_endpoint_dir_out(desc)) || - (!is_host && usb_endpoint_dir_in(desc))) + if ((is_host && !dir_in) || + (!is_host && dir_in)) dir |= DIR_OUT; if (!dir) usbhsp_flags_set(pipe, IS_DIR_IN); /* SHTNAK */ - if (usbhsp_type_is(pipe, USB_ENDPOINT_XFER_BULK) && + if (usbhs_pipe_type_is(pipe, USB_ENDPOINT_XFER_BULK) && !dir) shtnak = SHTNAK; /* EPNUM */ - epnum = 0xF & usb_endpoint_num(desc); + epnum = 0; /* see usbhs_pipe_config_update() */ return type | bfre | @@ -385,19 +347,7 @@ static u16 usbhsp_setup_pipecfg(struct usbhs_pipe *pipe, epnum; } -static u16 usbhsp_setup_pipemaxp(struct usbhs_pipe *pipe, - const struct usb_endpoint_descriptor *desc, - int is_host) -{ - /* host should set DEVSEL */ - - /* reutn MXPS */ - return PIPE_MAXP_MASK & le16_to_cpu(desc->wMaxPacketSize); -} - -static u16 usbhsp_setup_pipebuff(struct usbhs_pipe *pipe, - const struct usb_endpoint_descriptor *desc, - int is_host) +static u16 usbhsp_setup_pipebuff(struct usbhs_pipe *pipe) { struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); struct usbhs_pipe_info *info = usbhs_priv_to_pipeinfo(priv); @@ -441,9 +391,9 @@ static u16 usbhsp_setup_pipebuff(struct usbhs_pipe *pipe, * INT : 64 byte * ISOC: 512 byte */ - if (usbhsp_type_is(pipe, USB_ENDPOINT_XFER_CONTROL)) + if (usbhs_pipe_type_is(pipe, USB_ENDPOINT_XFER_CONTROL)) buff_size = 256; - else if (usbhsp_type_is(pipe, USB_ENDPOINT_XFER_INT)) + else if (usbhs_pipe_type_is(pipe, USB_ENDPOINT_XFER_INT)) buff_size = 64; else buff_size = 512; @@ -453,7 +403,7 @@ static u16 usbhsp_setup_pipebuff(struct usbhs_pipe *pipe, /* BUFNMB has been reserved for INT pipe * see above */ - if (usbhsp_type_is(pipe, USB_ENDPOINT_XFER_INT)) { + if (usbhs_pipe_type_is(pipe, USB_ENDPOINT_XFER_INT)) { bufnmb = pipe_num - 2; } else { bufnmb = info->bufnmb_last; @@ -473,16 +423,42 @@ static u16 usbhsp_setup_pipebuff(struct usbhs_pipe *pipe, (0xff & bufnmb) << 0; } +void usbhs_pipe_config_update(struct usbhs_pipe *pipe, u16 devsel, + u16 epnum, u16 maxp) +{ + if (devsel > 0xA) { + struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); + struct device *dev = usbhs_priv_to_dev(priv); + + dev_err(dev, "devsel error %d\n", devsel); + + devsel = 0; + } + + usbhsp_pipe_barrier(pipe); + + pipe->maxp = maxp; + + usbhsp_pipe_select(pipe); + usbhsp_pipe_maxp_set(pipe, 0xFFFF, + (devsel << 12) | + maxp); + + if (!usbhs_pipe_is_dcp(pipe)) + usbhsp_pipe_cfg_set(pipe, 0x000F, epnum); +} + /* * pipe control */ int usbhs_pipe_get_maxpacket(struct usbhs_pipe *pipe) { - u16 mask = usbhs_pipe_is_dcp(pipe) ? DCP_MAXP_MASK : PIPE_MAXP_MASK; - - usbhsp_pipe_select(pipe); - - return (int)(usbhsp_pipe_maxp_get(pipe) & mask); + /* + * see + * usbhs_pipe_config_update() + * usbhs_dcp_malloc() + */ + return pipe->maxp; } int usbhs_pipe_is_dir_in(struct usbhs_pipe *pipe) @@ -495,9 +471,12 @@ int usbhs_pipe_is_dir_host(struct usbhs_pipe *pipe) return usbhsp_flags_has(pipe, IS_DIR_HOST); } -void usbhs_pipe_clear_sequence(struct usbhs_pipe *pipe) +void usbhs_pipe_data_sequence(struct usbhs_pipe *pipe, int data) { - usbhsp_pipectrl_set(pipe, SQCLR, SQCLR); + u16 mask = (SQCLR | SQSET); + u16 val = (data) ? SQSET : SQCLR; + + usbhsp_pipectrl_set(pipe, mask, val); } void usbhs_pipe_clear(struct usbhs_pipe *pipe) @@ -516,7 +495,7 @@ static struct usbhs_pipe *usbhsp_get_pipe(struct usbhs_priv *priv, u32 type) */ pipe = NULL; usbhs_for_each_pipe_with_dcp(pos, priv, i) { - if (!usbhsp_type_is(pos, type)) + if (!usbhs_pipe_type_is(pos, type)) continue; if (usbhsp_flags_has(pos, IS_USED)) continue; @@ -538,19 +517,12 @@ static struct usbhs_pipe *usbhsp_get_pipe(struct usbhs_priv *priv, u32 type) } void usbhs_pipe_init(struct usbhs_priv *priv, - void (*done)(struct usbhs_pkt *pkt), int (*dma_map_ctrl)(struct usbhs_pkt *pkt, int map)) { struct usbhs_pipe_info *info = usbhs_priv_to_pipeinfo(priv); - struct device *dev = usbhs_priv_to_dev(priv); struct usbhs_pipe *pipe; int i; - if (!done) { - dev_err(dev, "no done function\n"); - return; - } - /* * FIXME * @@ -565,7 +537,7 @@ void usbhs_pipe_init(struct usbhs_priv *priv, */ info->bufnmb_last = 4; usbhs_for_each_pipe_with_dcp(pipe, priv, i) { - if (usbhsp_type_is(pipe, USB_ENDPOINT_XFER_INT)) + if (usbhs_pipe_type_is(pipe, USB_ENDPOINT_XFER_INT)) info->bufnmb_last++; usbhsp_flags_init(pipe); @@ -577,24 +549,23 @@ void usbhs_pipe_init(struct usbhs_priv *priv, usbhs_pipe_clear(pipe); } - info->done = done; info->dma_map_ctrl = dma_map_ctrl; } struct usbhs_pipe *usbhs_pipe_malloc(struct usbhs_priv *priv, - const struct usb_endpoint_descriptor *desc) + int endpoint_type, + int dir_in) { struct device *dev = usbhs_priv_to_dev(priv); - struct usbhs_mod *mod = usbhs_mod_get_current(priv); struct usbhs_pipe *pipe; - int is_host = usbhs_mod_is_host(priv, mod); + int is_host = usbhs_mod_is_host(priv); int ret; - u16 pipecfg, pipebuf, pipemaxp; + u16 pipecfg, pipebuf; - pipe = usbhsp_get_pipe(priv, usb_endpoint_type(desc)); + pipe = usbhsp_get_pipe(priv, endpoint_type); if (!pipe) { dev_err(dev, "can't get pipe (%s)\n", - usbhsp_pipe_name[usb_endpoint_type(desc)]); + usbhsp_pipe_name[endpoint_type]); return NULL; } @@ -609,22 +580,25 @@ struct usbhs_pipe *usbhs_pipe_malloc(struct usbhs_priv *priv, return NULL; } - pipecfg = usbhsp_setup_pipecfg(pipe, desc, is_host); - pipebuf = usbhsp_setup_pipebuff(pipe, desc, is_host); - pipemaxp = usbhsp_setup_pipemaxp(pipe, desc, is_host); + pipecfg = usbhsp_setup_pipecfg(pipe, is_host, dir_in); + pipebuf = usbhsp_setup_pipebuff(pipe); usbhsp_pipe_select(pipe); usbhsp_pipe_cfg_set(pipe, 0xFFFF, pipecfg); usbhsp_pipe_buf_set(pipe, 0xFFFF, pipebuf); - usbhsp_pipe_maxp_set(pipe, 0xFFFF, pipemaxp); - usbhs_pipe_clear_sequence(pipe); + usbhs_pipe_sequence_data0(pipe); dev_dbg(dev, "enable pipe %d : %s (%s)\n", usbhs_pipe_number(pipe), - usbhsp_pipe_name[usb_endpoint_type(desc)], + usbhs_pipe_name(pipe), usbhs_pipe_is_dir_in(pipe) ? "in" : "out"); + /* + * epnum / maxp are still not set to this pipe. + * call usbhs_pipe_config_update() after this function !! + */ + return pipe; } @@ -651,25 +625,31 @@ struct usbhs_pipe *usbhs_dcp_malloc(struct usbhs_priv *priv) if (!pipe) return NULL; + INIT_LIST_HEAD(&pipe->list); + /* - * dcpcfg : default - * dcpmaxp : default - * pipebuf : nothing to do + * call usbhs_pipe_config_update() after this function !! */ - usbhsp_pipe_select(pipe); - usbhs_pipe_clear_sequence(pipe); - INIT_LIST_HEAD(&pipe->list); - return pipe; } void usbhs_dcp_control_transfer_done(struct usbhs_pipe *pipe) { + struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); + WARN_ON(!usbhs_pipe_is_dcp(pipe)); usbhs_pipe_enable(pipe); - usbhsp_pipectrl_set(pipe, CCPL, CCPL); + + if (!usbhs_mod_is_host(priv)) /* funconly */ + usbhsp_pipectrl_set(pipe, CCPL, CCPL); +} + +void usbhs_dcp_dir_for_host(struct usbhs_pipe *pipe, int dir_out) +{ + usbhsp_pipe_cfg_set(pipe, DIR_OUT, + dir_out ? DIR_OUT : 0); } /* @@ -703,7 +683,9 @@ int usbhs_pipe_probe(struct usbhs_priv *priv) */ usbhs_for_each_pipe_with_dcp(pipe, priv, i) { pipe->priv = priv; - usbhsp_type(pipe) = pipe_type[i] & USB_ENDPOINT_XFERTYPE_MASK; + + usbhs_pipe_type(pipe) = + pipe_type[i] & USB_ENDPOINT_XFERTYPE_MASK; dev_dbg(dev, "pipe %x\t: %s\n", i, usbhsp_pipe_name[pipe_type[i]]); diff --git a/drivers/usb/renesas_usbhs/pipe.h b/drivers/usb/renesas_usbhs/pipe.h index 41534cb0e734..6334fc644cc0 100644 --- a/drivers/usb/renesas_usbhs/pipe.h +++ b/drivers/usb/renesas_usbhs/pipe.h @@ -30,11 +30,15 @@ struct usbhs_pipe { struct usbhs_fifo *fifo; struct list_head list; + int maxp; + u32 flags; #define USBHS_PIPE_FLAGS_IS_USED (1 << 0) #define USBHS_PIPE_FLAGS_IS_DIR_IN (1 << 1) #define USBHS_PIPE_FLAGS_IS_DIR_HOST (1 << 2) + struct usbhs_pkt_handle *handler; + void *mod_private; }; @@ -43,7 +47,6 @@ struct usbhs_pipe_info { int size; /* array size of "pipe" */ int bufnmb_last; /* FIXME : driver needs good allocator */ - void (*done)(struct usbhs_pkt *pkt); int (*dma_map_ctrl)(struct usbhs_pkt *pkt, int map); }; @@ -67,32 +70,30 @@ struct usbhs_pipe_info { #define usbhs_priv_to_pipeinfo(pr) (&(pr)->pipe_info) /* - * usb request - */ -void usbhs_usbreq_get_val(struct usbhs_priv *priv, struct usb_ctrlrequest *req); -void usbhs_usbreq_set_val(struct usbhs_priv *priv, struct usb_ctrlrequest *req); - -/* * pipe control */ +char *usbhs_pipe_name(struct usbhs_pipe *pipe); struct usbhs_pipe -*usbhs_pipe_malloc(struct usbhs_priv *priv, - const struct usb_endpoint_descriptor *desc); +*usbhs_pipe_malloc(struct usbhs_priv *priv, int endpoint_type, int dir_in); int usbhs_pipe_probe(struct usbhs_priv *priv); void usbhs_pipe_remove(struct usbhs_priv *priv); int usbhs_pipe_is_dir_in(struct usbhs_pipe *pipe); int usbhs_pipe_is_dir_host(struct usbhs_pipe *pipe); void usbhs_pipe_init(struct usbhs_priv *priv, - void (*done)(struct usbhs_pkt *pkt), int (*dma_map_ctrl)(struct usbhs_pkt *pkt, int map)); int usbhs_pipe_get_maxpacket(struct usbhs_pipe *pipe); -void usbhs_pipe_clear_sequence(struct usbhs_pipe *pipe); void usbhs_pipe_clear(struct usbhs_pipe *pipe); int usbhs_pipe_is_accessible(struct usbhs_pipe *pipe); void usbhs_pipe_enable(struct usbhs_pipe *pipe); void usbhs_pipe_disable(struct usbhs_pipe *pipe); void usbhs_pipe_stall(struct usbhs_pipe *pipe); void usbhs_pipe_select_fifo(struct usbhs_pipe *pipe, struct usbhs_fifo *fifo); +void usbhs_pipe_config_update(struct usbhs_pipe *pipe, u16 devsel, + u16 epnum, u16 maxp); + +#define usbhs_pipe_sequence_data0(pipe) usbhs_pipe_data_sequence(pipe, 0) +#define usbhs_pipe_sequence_data1(pipe) usbhs_pipe_data_sequence(pipe, 1) +void usbhs_pipe_data_sequence(struct usbhs_pipe *pipe, int data); #define usbhs_pipe_to_priv(p) ((p)->priv) #define usbhs_pipe_number(p) (int)((p) - (p)->priv->pipe_info.pipe) @@ -100,10 +101,14 @@ void usbhs_pipe_select_fifo(struct usbhs_pipe *pipe, struct usbhs_fifo *fifo); #define usbhs_pipe_to_fifo(p) ((p)->fifo) #define usbhs_pipe_is_busy(p) usbhs_pipe_to_fifo(p) +#define usbhs_pipe_type(p) ((p)->pipe_type) +#define usbhs_pipe_type_is(p, t) ((p)->pipe_type == t) + /* * dcp control */ struct usbhs_pipe *usbhs_dcp_malloc(struct usbhs_priv *priv); void usbhs_dcp_control_transfer_done(struct usbhs_pipe *pipe); +void usbhs_dcp_dir_for_host(struct usbhs_pipe *pipe, int dir_out); #endif /* RENESAS_USB_PIPE_H */ diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig index b71e309116a3..677f577c0243 100644 --- a/drivers/usb/serial/Kconfig +++ b/drivers/usb/serial/Kconfig @@ -252,6 +252,7 @@ config USB_SERIAL_GARMIN config USB_SERIAL_IPW tristate "USB IPWireless (3G UMTS TDD) Driver" + select USB_SERIAL_WWAN help Say Y here if you want to use a IPWireless USB modem such as the ones supplied by Axity3G/Sentech South Africa. diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c index 86fbba6336c9..e92cbefc0f88 100644 --- a/drivers/usb/serial/digi_acceleport.c +++ b/drivers/usb/serial/digi_acceleport.c @@ -227,7 +227,7 @@ * - All sleeps use a timeout of DIGI_RETRY_TIMEOUT before looping to * recheck the condition they are sleeping on. This is defensive, * in case a wake up is lost. -* - Following Documentation/DocBook/kernel-locking.pdf no spin locks +* - Following Documentation/DocBook/kernel-locking.tmpl no spin locks * are held when calling copy_to/from_user or printk. */ diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 78a2cf9551cc..8fe034d2d3e7 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -73,6 +73,7 @@ struct ftdi_private { */ int flags; /* some ASYNC_xxxx flags are supported */ unsigned long last_dtr_rts; /* saved modem control outputs */ + struct async_icount icount; wait_queue_head_t delta_msr_wait; /* Used for TIOCMIWAIT */ char prev_status, diff_status; /* Used for TIOCMIWAIT */ char transmit_empty; /* If transmitter is empty or not */ @@ -101,6 +102,7 @@ static int ftdi_jtag_probe(struct usb_serial *serial); static int ftdi_mtxorb_hack_setup(struct usb_serial *serial); static int ftdi_NDI_device_setup(struct usb_serial *serial); static int ftdi_stmclite_probe(struct usb_serial *serial); +static int ftdi_8u2232c_probe(struct usb_serial *serial); static void ftdi_USB_UIRT_setup(struct ftdi_private *priv); static void ftdi_HE_TIRA1_setup(struct ftdi_private *priv); @@ -128,6 +130,10 @@ static struct ftdi_sio_quirk ftdi_stmclite_quirk = { .probe = ftdi_stmclite_probe, }; +static struct ftdi_sio_quirk ftdi_8u2232c_quirk = { + .probe = ftdi_8u2232c_probe, +}; + /* * The 8U232AM has the same API as the sio except for: * - it can support MUCH higher baudrates; up to: @@ -178,7 +184,8 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_8U232AM_PID) }, { USB_DEVICE(FTDI_VID, FTDI_8U232AM_ALT_PID) }, { USB_DEVICE(FTDI_VID, FTDI_232RL_PID) }, - { USB_DEVICE(FTDI_VID, FTDI_8U2232C_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_8U2232C_PID) , + .driver_info = (kernel_ulong_t)&ftdi_8u2232c_quirk }, { USB_DEVICE(FTDI_VID, FTDI_4232H_PID) }, { USB_DEVICE(FTDI_VID, FTDI_232H_PID) }, { USB_DEVICE(FTDI_VID, FTDI_MICRO_CHAMELEON_PID) }, @@ -201,6 +208,8 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_XF_640_PID) }, { USB_DEVICE(FTDI_VID, FTDI_XF_642_PID) }, { USB_DEVICE(FTDI_VID, FTDI_DSS20_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_URBAN_0_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_URBAN_1_PID) }, { USB_DEVICE(FTDI_NF_RIC_VID, FTDI_NF_RIC_PID) }, { USB_DEVICE(FTDI_VID, FTDI_VNHCPCUSB_D_PID) }, { USB_DEVICE(FTDI_VID, FTDI_MTXORB_0_PID) }, @@ -739,6 +748,8 @@ static struct usb_device_id id_table_combined [] = { .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, { USB_DEVICE(FTDI_VID, LMI_LM3S_EVAL_BOARD_PID), .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, + { USB_DEVICE(FTDI_VID, LMI_LM3S_ICDI_BOARD_PID), + .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, { USB_DEVICE(FTDI_VID, FTDI_TURTELIZER_PID), .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, { USB_DEVICE(RATOC_VENDOR_ID, RATOC_PRODUCT_ID_USB60F) }, @@ -879,6 +890,8 @@ static void ftdi_set_termios(struct tty_struct *tty, static int ftdi_tiocmget(struct tty_struct *tty); static int ftdi_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear); +static int ftdi_get_icount(struct tty_struct *tty, + struct serial_icounter_struct *icount); static int ftdi_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg); static void ftdi_break_ctl(struct tty_struct *tty, int break_state); @@ -913,6 +926,7 @@ static struct usb_serial_driver ftdi_sio_device = { .prepare_write_buffer = ftdi_prepare_write_buffer, .tiocmget = ftdi_tiocmget, .tiocmset = ftdi_tiocmset, + .get_icount = ftdi_get_icount, .ioctl = ftdi_ioctl, .set_termios = ftdi_set_termios, .break_ctl = ftdi_break_ctl, @@ -1480,7 +1494,7 @@ static void ftdi_set_max_packet_size(struct usb_serial_port *port) } /* set max packet size based on descriptor */ - priv->max_packet_size = le16_to_cpu(ep_desc->wMaxPacketSize); + priv->max_packet_size = usb_endpoint_maxp(ep_desc); dev_info(&udev->dev, "Setting MaxPacketSize %d\n", priv->max_packet_size); } @@ -1640,6 +1654,7 @@ static int ftdi_sio_port_probe(struct usb_serial_port *port) kref_init(&priv->kref); mutex_init(&priv->cfg_lock); + memset(&priv->icount, 0x00, sizeof(priv->icount)); init_waitqueue_head(&priv->delta_msr_wait); priv->flags = ASYNC_LOW_LATENCY; @@ -1737,6 +1752,18 @@ static int ftdi_jtag_probe(struct usb_serial *serial) return 0; } +static int ftdi_8u2232c_probe(struct usb_serial *serial) +{ + struct usb_device *udev = serial->dev; + + dbg("%s", __func__); + + if (strcmp(udev->manufacturer, "CALAO Systems") == 0) + return ftdi_jtag_probe(serial); + + return 0; +} + /* * First and second port on STMCLiteadaptors is reserved for JTAG interface * and the forth port for pio @@ -1891,6 +1918,7 @@ static int ftdi_prepare_write_buffer(struct usb_serial_port *port, c = kfifo_out(&port->write_fifo, &buffer[i + 1], len); if (!c) break; + priv->icount.tx += c; buffer[i] = (c << 2) + 1; count += c + 1; } @@ -1898,6 +1926,7 @@ static int ftdi_prepare_write_buffer(struct usb_serial_port *port, } else { count = kfifo_out_locked(&port->write_fifo, dest, size, &port->lock); + priv->icount.tx += count; } return count; @@ -1925,6 +1954,14 @@ static int ftdi_process_packet(struct tty_struct *tty, N.B. packet may be processed more than once, but differences are only processed once. */ status = packet[0] & FTDI_STATUS_B0_MASK; + if (status & FTDI_RS0_CTS) + priv->icount.cts++; + if (status & FTDI_RS0_DSR) + priv->icount.dsr++; + if (status & FTDI_RS0_RI) + priv->icount.rng++; + if (status & FTDI_RS0_RLSD) + priv->icount.dcd++; if (status != priv->prev_status) { priv->diff_status |= status ^ priv->prev_status; wake_up_interruptible(&priv->delta_msr_wait); @@ -1937,15 +1974,20 @@ static int ftdi_process_packet(struct tty_struct *tty, * over framing errors */ if (packet[1] & FTDI_RS_BI) { flag = TTY_BREAK; + priv->icount.brk++; usb_serial_handle_break(port); } else if (packet[1] & FTDI_RS_PE) { flag = TTY_PARITY; + priv->icount.parity++; } else if (packet[1] & FTDI_RS_FE) { flag = TTY_FRAME; + priv->icount.frame++; } /* Overrun is special, not associated with a char */ - if (packet[1] & FTDI_RS_OE) + if (packet[1] & FTDI_RS_OE) { + priv->icount.overrun++; tty_insert_flip_char(tty, 0, TTY_OVERRUN); + } } /* save if the transmitter is empty or not */ @@ -1957,6 +1999,7 @@ static int ftdi_process_packet(struct tty_struct *tty, len -= 2; if (!len) return 0; /* status only */ + priv->icount.rx += len; ch = packet + 2; if (port->port.console && port->sysrq) { @@ -2259,11 +2302,34 @@ static int ftdi_tiocmset(struct tty_struct *tty, return update_mctrl(port, set, clear); } +static int ftdi_get_icount(struct tty_struct *tty, + struct serial_icounter_struct *icount) +{ + struct usb_serial_port *port = tty->driver_data; + struct ftdi_private *priv = usb_get_serial_port_data(port); + struct async_icount *ic = &priv->icount; + + icount->cts = ic->cts; + icount->dsr = ic->dsr; + icount->rng = ic->rng; + icount->dcd = ic->dcd; + icount->tx = ic->tx; + icount->rx = ic->rx; + icount->frame = ic->frame; + icount->parity = ic->parity; + icount->overrun = ic->overrun; + icount->brk = ic->brk; + icount->buf_overrun = ic->buf_overrun; + return 0; +} + static int ftdi_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { struct usb_serial_port *port = tty->driver_data; struct ftdi_private *priv = usb_get_serial_port_data(port); + struct async_icount cnow; + struct async_icount cprev; dbg("%s cmd 0x%04x", __func__, cmd); @@ -2283,41 +2349,30 @@ static int ftdi_ioctl(struct tty_struct *tty, * - mask passed in arg for lines of interest * (use |'ed TIOCM_RNG/DSR/CD/CTS for masking) * Caller should use TIOCGICOUNT to see which one it was. - * (except that the driver doesn't support it !) * * This code is borrowed from linux/drivers/char/serial.c */ case TIOCMIWAIT: - while (priv != NULL) { + cprev = priv->icount; + while (1) { interruptible_sleep_on(&priv->delta_msr_wait); /* see if a signal did it */ if (signal_pending(current)) return -ERESTARTSYS; - else { - char diff = priv->diff_status; - - if (diff == 0) - return -EIO; /* no change => error */ - - /* Consume all events */ - priv->diff_status = 0; - - /* Return 0 if caller wanted to know about - these bits */ - if (((arg & TIOCM_RNG) && (diff & FTDI_RS0_RI)) || - ((arg & TIOCM_DSR) && (diff & FTDI_RS0_DSR)) || - ((arg & TIOCM_CD) && (diff & FTDI_RS0_RLSD)) || - ((arg & TIOCM_CTS) && (diff & FTDI_RS0_CTS))) { - return 0; - } - /* - * Otherwise caller can't care less about what - * happened,and so we continue to wait for more - * events. - */ + cnow = priv->icount; + if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr && + cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) + return -EIO; /* no change => error */ + if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) || + ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) || + ((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd)) || + ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts))) { + return 0; } + cprev = cnow; } - return 0; + /* not reached */ + break; case TIOCSERGETLSR: return get_lsr_info(port, (struct serial_struct __user *)arg); break; diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h index bf5227ad3ef7..571fa96b49c7 100644 --- a/drivers/usb/serial/ftdi_sio_ids.h +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -54,6 +54,7 @@ /* FTDI 2332C Dual channel device, side A=245 FIFO (JTAG), Side B=RS232 UART */ #define LMI_LM3S_DEVEL_BOARD_PID 0xbcd8 #define LMI_LM3S_EVAL_BOARD_PID 0xbcd9 +#define LMI_LM3S_ICDI_BOARD_PID 0xbcda #define FTDI_TURTELIZER_PID 0xBDC8 /* JTAG/RS-232 adapter by egnite GmbH */ @@ -420,9 +421,11 @@ #define PROTEGO_SPECIAL_4 0xFC73 /* special/unknown device */ /* - * DSS-20 Sync Station for Sony Ericsson P800 + * Sony Ericsson product ids */ -#define FTDI_DSS20_PID 0xFC82 +#define FTDI_DSS20_PID 0xFC82 /* DSS-20 Sync Station for Sony Ericsson P800 */ +#define FTDI_URBAN_0_PID 0xFC8A /* Sony Ericsson Urban, uart #0 */ +#define FTDI_URBAN_1_PID 0xFC8B /* Sony Ericsson Urban, uart #1 */ /* www.irtrans.de device */ #define FTDI_IRTRANS_PID 0xFC60 /* Product Id */ diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c index abf095be5753..2ee807523f53 100644 --- a/drivers/usb/serial/io_edgeport.c +++ b/drivers/usb/serial/io_edgeport.c @@ -3042,7 +3042,7 @@ static int edge_startup(struct usb_serial *serial) endpoint = &serial->interface->altsetting[0]. endpoint[i].desc; - buffer_size = le16_to_cpu(endpoint->wMaxPacketSize); + buffer_size = usb_endpoint_maxp(endpoint); if (!interrupt_in_found && (usb_endpoint_is_int_in(endpoint))) { /* we found a interrupt in endpoint */ @@ -3107,7 +3107,7 @@ static int edge_startup(struct usb_serial *serial) usb_rcvbulkpipe(dev, endpoint->bEndpointAddress), edge_serial->bulk_in_buffer, - le16_to_cpu(endpoint->wMaxPacketSize), + usb_endpoint_maxp(endpoint), edge_bulk_in_callback, edge_serial); bulk_in_found = true; diff --git a/drivers/usb/serial/ipw.c b/drivers/usb/serial/ipw.c index ca77e88836bd..5170799d6e94 100644 --- a/drivers/usb/serial/ipw.c +++ b/drivers/usb/serial/ipw.c @@ -47,6 +47,7 @@ #include <linux/usb.h> #include <linux/usb/serial.h> #include <linux/uaccess.h> +#include "usb-wwan.h" /* * Version Information @@ -185,7 +186,7 @@ static int ipw_open(struct tty_struct *tty, struct usb_serial_port *port) /*--2: Start reading from the device */ dbg("%s: setting up bulk read callback", __func__); - usb_serial_generic_open(tty, port); + usb_wwan_open(tty, port); /*--3: Tell the modem to open the floodgates on the rx bulk channel */ dbg("%s:asking modem for RxRead (RXBULK_ON)", __func__); @@ -219,6 +220,29 @@ static int ipw_open(struct tty_struct *tty, struct usb_serial_port *port) return 0; } +/* fake probe - only to allocate data structures */ +static int ipw_probe(struct usb_serial *serial, const struct usb_device_id *id) +{ + struct usb_wwan_intf_private *data; + + data = kzalloc(sizeof(struct usb_wwan_intf_private), GFP_KERNEL); + if (!data) + return -ENOMEM; + + spin_lock_init(&data->susp_lock); + usb_set_serial_data(serial, data); + return 0; +} + +static void ipw_release(struct usb_serial *serial) +{ + struct usb_wwan_intf_private *data = usb_get_serial_data(serial); + + usb_wwan_release(serial); + usb_set_serial_data(serial, NULL); + kfree(data); +} + static void ipw_dtr_rts(struct usb_serial_port *port, int on) { struct usb_device *dev = port->serial->dev; @@ -285,7 +309,7 @@ static void ipw_close(struct usb_serial_port *port) dev_err(&port->dev, "Disabling bulk RxRead failed (error = %d)\n", result); - usb_serial_generic_close(port); + usb_wwan_close(port); } static struct usb_serial_driver ipw_device = { @@ -297,9 +321,14 @@ static struct usb_serial_driver ipw_device = { .usb_driver = &usb_ipw_driver, .id_table = usb_ipw_ids, .num_ports = 1, + .disconnect = usb_wwan_disconnect, .open = ipw_open, .close = ipw_close, + .probe = ipw_probe, + .attach = usb_wwan_startup, + .release = ipw_release, .dtr_rts = ipw_dtr_rts, + .write = usb_wwan_write, }; diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c index 40abedbc5943..3524a105d042 100644 --- a/drivers/usb/serial/mos7720.c +++ b/drivers/usb/serial/mos7720.c @@ -2006,7 +2006,6 @@ static int mos7720_ioctl(struct tty_struct *tty, dbg("%s (%d) TIOCSERGETLSR", __func__, port->number); return get_lsr_info(tty, mos7720_port, (unsigned int __user *)arg); - return 0; /* FIXME: These should be using the mode methods */ case TIOCMBIS: diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c index 7b50aa122752..c72abd524983 100644 --- a/drivers/usb/serial/mos7840.c +++ b/drivers/usb/serial/mos7840.c @@ -2263,7 +2263,6 @@ static int mos7840_ioctl(struct tty_struct *tty, case TIOCSERGETLSR: dbg("%s (%d) TIOCSERGETLSR", __func__, port->number); return mos7840_get_lsr_info(tty, argp); - return 0; case TIOCGSERIAL: dbg("%s (%d) TIOCGSERIAL", __func__, port->number); diff --git a/drivers/usb/serial/opticon.c b/drivers/usb/serial/opticon.c index 96423f3c8ef3..c248a9147439 100644 --- a/drivers/usb/serial/opticon.c +++ b/drivers/usb/serial/opticon.c @@ -523,7 +523,7 @@ static int opticon_startup(struct usb_serial *serial) goto error; } - priv->buffer_size = le16_to_cpu(endpoint->wMaxPacketSize) * 2; + priv->buffer_size = usb_endpoint_maxp(endpoint) * 2; priv->bulk_in_buffer = kmalloc(priv->buffer_size, GFP_KERNEL); if (!priv->bulk_in_buffer) { dev_err(&priv->udev->dev, "out of memory\n"); diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 815656198914..89ae1f65e1b1 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -148,6 +148,8 @@ static void option_instat_callback(struct urb *urb); #define HUAWEI_PRODUCT_K4505 0x1464 #define HUAWEI_PRODUCT_K3765 0x1465 #define HUAWEI_PRODUCT_E14AC 0x14AC +#define HUAWEI_PRODUCT_K3806 0x14AE +#define HUAWEI_PRODUCT_K4605 0x14C6 #define HUAWEI_PRODUCT_K3770 0x14C9 #define HUAWEI_PRODUCT_K3771 0x14CA #define HUAWEI_PRODUCT_K4510 0x14CB @@ -416,6 +418,56 @@ static void option_instat_callback(struct urb *urb); #define SAMSUNG_VENDOR_ID 0x04e8 #define SAMSUNG_PRODUCT_GT_B3730 0x6889 +/* YUGA products www.yuga-info.com*/ +#define YUGA_VENDOR_ID 0x257A +#define YUGA_PRODUCT_CEM600 0x1601 +#define YUGA_PRODUCT_CEM610 0x1602 +#define YUGA_PRODUCT_CEM500 0x1603 +#define YUGA_PRODUCT_CEM510 0x1604 +#define YUGA_PRODUCT_CEM800 0x1605 +#define YUGA_PRODUCT_CEM900 0x1606 + +#define YUGA_PRODUCT_CEU818 0x1607 +#define YUGA_PRODUCT_CEU816 0x1608 +#define YUGA_PRODUCT_CEU828 0x1609 +#define YUGA_PRODUCT_CEU826 0x160A +#define YUGA_PRODUCT_CEU518 0x160B +#define YUGA_PRODUCT_CEU516 0x160C +#define YUGA_PRODUCT_CEU528 0x160D +#define YUGA_PRODUCT_CEU526 0x160F + +#define YUGA_PRODUCT_CWM600 0x2601 +#define YUGA_PRODUCT_CWM610 0x2602 +#define YUGA_PRODUCT_CWM500 0x2603 +#define YUGA_PRODUCT_CWM510 0x2604 +#define YUGA_PRODUCT_CWM800 0x2605 +#define YUGA_PRODUCT_CWM900 0x2606 + +#define YUGA_PRODUCT_CWU718 0x2607 +#define YUGA_PRODUCT_CWU716 0x2608 +#define YUGA_PRODUCT_CWU728 0x2609 +#define YUGA_PRODUCT_CWU726 0x260A +#define YUGA_PRODUCT_CWU518 0x260B +#define YUGA_PRODUCT_CWU516 0x260C +#define YUGA_PRODUCT_CWU528 0x260D +#define YUGA_PRODUCT_CWU526 0x260F + +#define YUGA_PRODUCT_CLM600 0x2601 +#define YUGA_PRODUCT_CLM610 0x2602 +#define YUGA_PRODUCT_CLM500 0x2603 +#define YUGA_PRODUCT_CLM510 0x2604 +#define YUGA_PRODUCT_CLM800 0x2605 +#define YUGA_PRODUCT_CLM900 0x2606 + +#define YUGA_PRODUCT_CLU718 0x2607 +#define YUGA_PRODUCT_CLU716 0x2608 +#define YUGA_PRODUCT_CLU728 0x2609 +#define YUGA_PRODUCT_CLU726 0x260A +#define YUGA_PRODUCT_CLU518 0x260B +#define YUGA_PRODUCT_CLU516 0x260C +#define YUGA_PRODUCT_CLU528 0x260D +#define YUGA_PRODUCT_CLU526 0x260F + /* some devices interfaces need special handling due to a number of reasons */ enum option_blacklist_reason { OPTION_BLACKLIST_NONE = 0, @@ -423,31 +475,54 @@ enum option_blacklist_reason { OPTION_BLACKLIST_RESERVED_IF = 2 }; +#define MAX_BL_NUM 8 struct option_blacklist_info { - const u32 infolen; /* number of interface numbers on blacklist */ - const u8 *ifaceinfo; /* pointer to the array holding the numbers */ - enum option_blacklist_reason reason; + /* bitfield of interface numbers for OPTION_BLACKLIST_SENDSETUP */ + const unsigned long sendsetup; + /* bitfield of interface numbers for OPTION_BLACKLIST_RESERVED_IF */ + const unsigned long reserved; }; -static const u8 four_g_w14_no_sendsetup[] = { 0, 1 }; static const struct option_blacklist_info four_g_w14_blacklist = { - .infolen = ARRAY_SIZE(four_g_w14_no_sendsetup), - .ifaceinfo = four_g_w14_no_sendsetup, - .reason = OPTION_BLACKLIST_SENDSETUP + .sendsetup = BIT(0) | BIT(1), }; -static const u8 alcatel_x200_no_sendsetup[] = { 0, 1 }; static const struct option_blacklist_info alcatel_x200_blacklist = { - .infolen = ARRAY_SIZE(alcatel_x200_no_sendsetup), - .ifaceinfo = alcatel_x200_no_sendsetup, - .reason = OPTION_BLACKLIST_SENDSETUP + .sendsetup = BIT(0) | BIT(1), +}; + +static const struct option_blacklist_info zte_0037_blacklist = { + .sendsetup = BIT(0) | BIT(1), }; -static const u8 zte_k3765_z_no_sendsetup[] = { 0, 1, 2 }; static const struct option_blacklist_info zte_k3765_z_blacklist = { - .infolen = ARRAY_SIZE(zte_k3765_z_no_sendsetup), - .ifaceinfo = zte_k3765_z_no_sendsetup, - .reason = OPTION_BLACKLIST_SENDSETUP + .sendsetup = BIT(0) | BIT(1) | BIT(2), + .reserved = BIT(4), +}; + +static const struct option_blacklist_info huawei_cdc12_blacklist = { + .reserved = BIT(1) | BIT(2), +}; + +static const struct option_blacklist_info net_intf1_blacklist = { + .reserved = BIT(1), +}; + +static const struct option_blacklist_info net_intf3_blacklist = { + .reserved = BIT(3), +}; + +static const struct option_blacklist_info net_intf4_blacklist = { + .reserved = BIT(4), +}; + +static const struct option_blacklist_info net_intf5_blacklist = { + .reserved = BIT(5), +}; + +static const struct option_blacklist_info zte_mf626_blacklist = { + .sendsetup = BIT(0) | BIT(1), + .reserved = BIT(4), }; static const struct usb_device_id option_ids[] = { @@ -547,10 +622,15 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E143D, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E143E, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E143F, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4505, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3765, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4505, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t) &huawei_cdc12_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3765, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t) &huawei_cdc12_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_ETS1220, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E14AC, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3806, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4605, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t) &huawei_cdc12_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3770, 0xff, 0x02, 0x31) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3770, 0xff, 0x02, 0x32) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3771, 0xff, 0x02, 0x31) }, @@ -651,7 +731,8 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_UC864E) }, { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_UC864G) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MF622, 0xff, 0xff, 0xff) }, /* ZTE WCDMA products */ - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0002, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0002, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t)&net_intf1_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0003, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0004, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0005, 0xff, 0xff, 0xff) }, @@ -666,51 +747,62 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x000f, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0010, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0011, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0012, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0012, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t)&net_intf1_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0013, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0014, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MF628, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0016, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0017, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0017, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t)&net_intf3_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0018, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0019, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0020, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0021, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0021, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0022, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0023, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0024, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0025, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0025, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t)&net_intf1_blacklist }, /* { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0026, 0xff, 0xff, 0xff) }, */ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0028, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0029, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0030, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MF626, 0xff, - 0xff, 0xff), .driver_info = (kernel_ulong_t)&four_g_w14_blacklist }, + 0xff, 0xff), .driver_info = (kernel_ulong_t)&zte_mf626_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0032, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0033, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0034, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0037, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0037, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t)&zte_0037_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0038, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0039, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0040, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0042, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0042, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0043, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0044, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0048, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0049, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0049, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t)&net_intf5_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0050, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0051, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0052, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0052, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, /* { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0053, 0xff, 0xff, 0xff) }, */ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0054, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0055, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0055, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t)&net_intf1_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0056, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0057, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0058, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0058, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0059, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0061, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0062, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0063, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0063, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0064, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0065, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0066, 0xff, 0xff, 0xff) }, @@ -725,11 +817,13 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0083, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0086, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0087, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0104, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0104, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0105, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0106, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0108, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0113, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0113, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t)&net_intf5_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0117, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0118, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0121, 0xff, 0xff, 0xff) }, @@ -1005,6 +1099,48 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE(CELOT_VENDOR_ID, CELOT_PRODUCT_CT680M) }, /* CT-650 CDMA 450 1xEVDO modem */ { USB_DEVICE(ONDA_VENDOR_ID, ONDA_MT825UP) }, /* ONDA MT825UP modem */ { USB_DEVICE_AND_INTERFACE_INFO(SAMSUNG_VENDOR_ID, SAMSUNG_PRODUCT_GT_B3730, USB_CLASS_CDC_DATA, 0x00, 0x00) }, /* Samsung GT-B3730 LTE USB modem.*/ + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEM600) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEM610) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEM500) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEM510) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEM800) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEM900) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEU818) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEU816) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEU828) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEU826) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEU518) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEU516) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEU528) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEU526) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CWM600) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CWM610) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CWM500) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CWM510) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CWM800) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CWM900) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CWU718) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CWU716) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CWU728) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CWU726) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CWU518) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CWU516) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CWU528) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CWU526) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLM600) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLM610) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLM500) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLM510) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLM800) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLM900) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLU718) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLU716) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLU728) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLU726) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLU518) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLU516) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLU528) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLU526) }, { } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, option_ids); @@ -1118,10 +1254,35 @@ static void __exit option_exit(void) module_init(option_init); module_exit(option_exit); +static bool is_blacklisted(const u8 ifnum, enum option_blacklist_reason reason, + const struct option_blacklist_info *blacklist) +{ + unsigned long num; + const unsigned long *intf_list; + + if (blacklist) { + if (reason == OPTION_BLACKLIST_SENDSETUP) + intf_list = &blacklist->sendsetup; + else if (reason == OPTION_BLACKLIST_RESERVED_IF) + intf_list = &blacklist->reserved; + else { + BUG_ON(reason); + return false; + } + + for_each_set_bit(num, intf_list, MAX_BL_NUM + 1) { + if (num == ifnum) + return true; + } + } + return false; +} + static int option_probe(struct usb_serial *serial, const struct usb_device_id *id) { struct usb_wwan_intf_private *data; + /* D-Link DWM 652 still exposes CD-Rom emulation interface in modem mode */ if (serial->dev->descriptor.idVendor == DLINK_VENDOR_ID && serial->dev->descriptor.idProduct == DLINK_PRODUCT_DWM_652 && @@ -1134,12 +1295,14 @@ static int option_probe(struct usb_serial *serial, serial->interface->cur_altsetting->desc.bInterfaceClass != 0xff) return -ENODEV; - /* Don't bind network interfaces on Huawei K3765 & K4505 */ - if (serial->dev->descriptor.idVendor == HUAWEI_VENDOR_ID && - (serial->dev->descriptor.idProduct == HUAWEI_PRODUCT_K3765 || - serial->dev->descriptor.idProduct == HUAWEI_PRODUCT_K4505) && - serial->interface->cur_altsetting->desc.bInterfaceNumber == 1) - return -ENODEV; + /* Don't bind reserved interfaces (like network ones) which often have + * the same class/subclass/protocol as the serial interfaces. Look at + * the Windows driver .INF files for reserved interface numbers. + */ + if (is_blacklisted( + serial->interface->cur_altsetting->desc.bInterfaceNumber, + OPTION_BLACKLIST_RESERVED_IF, + (const struct option_blacklist_info *) id->driver_info)) /* Don't bind network interface on Samsung GT-B3730, it is handled by a separate module */ if (serial->dev->descriptor.idVendor == SAMSUNG_VENDOR_ID && @@ -1148,7 +1311,6 @@ static int option_probe(struct usb_serial *serial, return -ENODEV; data = serial->private = kzalloc(sizeof(struct usb_wwan_intf_private), GFP_KERNEL); - if (!data) return -ENOMEM; data->send_setup = option_send_setup; @@ -1157,23 +1319,6 @@ static int option_probe(struct usb_serial *serial, return 0; } -static enum option_blacklist_reason is_blacklisted(const u8 ifnum, - const struct option_blacklist_info *blacklist) -{ - const u8 *info; - int i; - - if (blacklist) { - info = blacklist->ifaceinfo; - - for (i = 0; i < blacklist->infolen; i++) { - if (info[i] == ifnum) - return blacklist->reason; - } - } - return OPTION_BLACKLIST_NONE; -} - static void option_instat_callback(struct urb *urb) { int err; @@ -1245,9 +1390,8 @@ static int option_send_setup(struct usb_serial_port *port) int val = 0; dbg("%s", __func__); - if (is_blacklisted(ifNum, - (struct option_blacklist_info *) intfdata->private) - == OPTION_BLACKLIST_SENDSETUP) { + if (is_blacklisted(ifNum, OPTION_BLACKLIST_SENDSETUP, + (struct option_blacklist_info *) intfdata->private)) { dbg("No send_setup on blacklisted interface #%d\n", ifNum); return -EIO; } diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index 1d33260de014..9083d1e616b4 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -92,6 +92,7 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(SANWA_VENDOR_ID, SANWA_PRODUCT_ID) }, { USB_DEVICE(ADLINK_VENDOR_ID, ADLINK_ND6530_PRODUCT_ID) }, { USB_DEVICE(WINCHIPHEAD_VENDOR_ID, WINCHIPHEAD_USBSER_PRODUCT_ID) }, + { USB_DEVICE(SMART_VENDOR_ID, SMART_PRODUCT_ID) }, { } /* Terminating entry */ }; @@ -360,9 +361,6 @@ static void pl2303_set_termios(struct tty_struct *tty, tmp >>= 2; buf[1] <<= 1; } - if (tmp > 256) { - tmp %= 256; - } buf[0] = tmp; } } diff --git a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h index ca0d237683b3..3d10d7f02072 100644 --- a/drivers/usb/serial/pl2303.h +++ b/drivers/usb/serial/pl2303.h @@ -148,3 +148,8 @@ /* WinChipHead USB->RS 232 adapter */ #define WINCHIPHEAD_VENDOR_ID 0x4348 #define WINCHIPHEAD_USBSER_PRODUCT_ID 0x5523 + +/* SMART USB Serial Adapter */ +#define SMART_VENDOR_ID 0x0b8c +#define SMART_PRODUCT_ID 0x2303 + diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c index aeccc7f0a93c..b9bb24729c99 100644 --- a/drivers/usb/serial/qcserial.c +++ b/drivers/usb/serial/qcserial.c @@ -28,6 +28,7 @@ static const struct usb_device_id id_table[] = { {USB_DEVICE(0x05c6, 0x9212)}, /* Acer Gobi Modem Device */ {USB_DEVICE(0x03f0, 0x1f1d)}, /* HP un2400 Gobi Modem Device */ {USB_DEVICE(0x03f0, 0x201d)}, /* HP un2400 Gobi QDL Device */ + {USB_DEVICE(0x03f0, 0x371d)}, /* HP un2430 Mobile Broadband Module */ {USB_DEVICE(0x04da, 0x250d)}, /* Panasonic Gobi Modem device */ {USB_DEVICE(0x04da, 0x250c)}, /* Panasonic Gobi QDL device */ {USB_DEVICE(0x413c, 0x8172)}, /* Dell Gobi Modem device */ @@ -84,6 +85,7 @@ static const struct usb_device_id id_table[] = { {USB_DEVICE(0x16d8, 0x8002)}, /* CMDTech Gobi 2000 Modem device (VU922) */ {USB_DEVICE(0x05c6, 0x9204)}, /* Gobi 2000 QDL device */ {USB_DEVICE(0x05c6, 0x9205)}, /* Gobi 2000 Modem device */ + {USB_DEVICE(0x1199, 0x9013)}, /* Sierra Wireless Gobi 3000 Modem device (MC8355) */ { } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, id_table); diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c index d5d136a53b61..b18179bda0d8 100644 --- a/drivers/usb/serial/sierra.c +++ b/drivers/usb/serial/sierra.c @@ -1009,7 +1009,7 @@ static int sierra_suspend(struct usb_serial *serial, pm_message_t message) struct sierra_intf_private *intfdata; int b; - if (message.event & PM_EVENT_AUTO) { + if (PMSG_IS_AUTO(message)) { intfdata = serial->private; spin_lock_irq(&intfdata->susp_lock); b = intfdata->in_flight; diff --git a/drivers/usb/serial/symbolserial.c b/drivers/usb/serial/symbolserial.c index d9457bd4fe10..7096f799b071 100644 --- a/drivers/usb/serial/symbolserial.c +++ b/drivers/usb/serial/symbolserial.c @@ -226,7 +226,7 @@ static int symbol_startup(struct usb_serial *serial) goto error; } - priv->buffer_size = le16_to_cpu(endpoint->wMaxPacketSize) * 2; + priv->buffer_size = usb_endpoint_maxp(endpoint) * 2; priv->int_buffer = kmalloc(priv->buffer_size, GFP_KERNEL); if (!priv->int_buffer) { dev_err(&priv->udev->dev, "out of memory\n"); diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index 1c031309ab25..cc274fdf2627 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -912,7 +912,7 @@ int usb_serial_probe(struct usb_interface *interface, goto probe_error; } buffer_size = max_t(int, serial->type->bulk_in_size, - le16_to_cpu(endpoint->wMaxPacketSize)); + usb_endpoint_maxp(endpoint)); port->bulk_in_size = buffer_size; port->bulk_in_endpointAddress = endpoint->bEndpointAddress; port->bulk_in_buffer = kmalloc(buffer_size, GFP_KERNEL); @@ -942,7 +942,7 @@ int usb_serial_probe(struct usb_interface *interface, goto probe_error; buffer_size = serial->type->bulk_out_size; if (!buffer_size) - buffer_size = le16_to_cpu(endpoint->wMaxPacketSize); + buffer_size = usb_endpoint_maxp(endpoint); port->bulk_out_size = buffer_size; port->bulk_out_endpointAddress = endpoint->bEndpointAddress; port->bulk_out_buffer = kmalloc(buffer_size, GFP_KERNEL); @@ -990,7 +990,7 @@ int usb_serial_probe(struct usb_interface *interface, "No free urbs available\n"); goto probe_error; } - buffer_size = le16_to_cpu(endpoint->wMaxPacketSize); + buffer_size = usb_endpoint_maxp(endpoint); port->interrupt_in_endpointAddress = endpoint->bEndpointAddress; port->interrupt_in_buffer = kmalloc(buffer_size, @@ -1021,7 +1021,7 @@ int usb_serial_probe(struct usb_interface *interface, "No free urbs available\n"); goto probe_error; } - buffer_size = le16_to_cpu(endpoint->wMaxPacketSize); + buffer_size = usb_endpoint_maxp(endpoint); port->interrupt_out_size = buffer_size; port->interrupt_out_endpointAddress = endpoint->bEndpointAddress; diff --git a/drivers/usb/serial/usb_wwan.c b/drivers/usb/serial/usb_wwan.c index e4fad5e643d7..d555ca9567b8 100644 --- a/drivers/usb/serial/usb_wwan.c +++ b/drivers/usb/serial/usb_wwan.c @@ -651,7 +651,7 @@ int usb_wwan_suspend(struct usb_serial *serial, pm_message_t message) dbg("%s entered", __func__); - if (message.event & PM_EVENT_AUTO) { + if (PMSG_IS_AUTO(message)) { spin_lock_irq(&intfdata->susp_lock); b = intfdata->in_flight; spin_unlock_irq(&intfdata->susp_lock); diff --git a/drivers/usb/storage/Kconfig b/drivers/usb/storage/Kconfig index bedc4b9f2ac4..fe2d803a6347 100644 --- a/drivers/usb/storage/Kconfig +++ b/drivers/usb/storage/Kconfig @@ -42,7 +42,7 @@ config USB_STORAGE_REALTEK config REALTEK_AUTOPM bool "Realtek Card Reader autosuspend support" - depends on USB_STORAGE_REALTEK && CONFIG_PM_RUNTIME + depends on USB_STORAGE_REALTEK && PM_RUNTIME default y config USB_STORAGE_DATAFAB diff --git a/drivers/usb/storage/realtek_cr.c b/drivers/usb/storage/realtek_cr.c index 34adc4b42ceb..0ce5f79197e7 100644 --- a/drivers/usb/storage/realtek_cr.c +++ b/drivers/usb/storage/realtek_cr.c @@ -25,7 +25,6 @@ #include <linux/kthread.h> #include <linux/sched.h> #include <linux/kernel.h> -#include <linux/version.h> #include <scsi/scsi.h> #include <scsi/scsi_cmnd.h> @@ -293,6 +292,52 @@ static int rts51x_bulk_transport(struct us_data *us, u8 lun, return USB_STOR_TRANSPORT_ERROR; } +static int rts51x_bulk_transport_special(struct us_data *us, u8 lun, + u8 *cmd, int cmd_len, u8 *buf, int buf_len, + enum dma_data_direction dir, int *act_len) +{ + struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap *) us->iobuf; + struct bulk_cs_wrap *bcs = (struct bulk_cs_wrap *) us->iobuf; + int result; + unsigned int cswlen; + unsigned int cbwlen = US_BULK_CB_WRAP_LEN; + + /* set up the command wrapper */ + bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN); + bcb->DataTransferLength = cpu_to_le32(buf_len); + bcb->Flags = (dir == DMA_FROM_DEVICE) ? 1 << 7 : 0; + bcb->Tag = ++us->tag; + bcb->Lun = lun; + bcb->Length = cmd_len; + + /* copy the command payload */ + memset(bcb->CDB, 0, sizeof(bcb->CDB)); + memcpy(bcb->CDB, cmd, bcb->Length); + + /* send it to out endpoint */ + result = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe, + bcb, cbwlen, NULL); + if (result != USB_STOR_XFER_GOOD) + return USB_STOR_TRANSPORT_ERROR; + + /* DATA STAGE */ + /* send/receive data payload, if there is any */ + + if (buf && buf_len) { + unsigned int pipe = (dir == DMA_FROM_DEVICE) ? + us->recv_bulk_pipe : us->send_bulk_pipe; + result = usb_stor_bulk_transfer_buf(us, pipe, + buf, buf_len, NULL); + if (result == USB_STOR_XFER_ERROR) + return USB_STOR_TRANSPORT_ERROR; + } + + /* get CSW for device status */ + result = usb_bulk_msg(us->pusb_dev, us->recv_bulk_pipe, bcs, + US_BULK_CS_WRAP_LEN, &cswlen, 250); + return result; +} + /* Determine what the maximum LUN supported is */ static int rts51x_get_max_lun(struct us_data *us) { @@ -320,6 +365,11 @@ static int rts51x_read_mem(struct us_data *us, u16 addr, u8 *data, u16 len) { int retval; u8 cmnd[12] = { 0 }; + u8 *buf; + + buf = kmalloc(len, GFP_NOIO); + if (buf == NULL) + return USB_STOR_TRANSPORT_ERROR; US_DEBUGP("%s, addr = 0x%x, len = %d\n", __func__, addr, len); @@ -331,10 +381,14 @@ static int rts51x_read_mem(struct us_data *us, u16 addr, u8 *data, u16 len) cmnd[5] = (u8) len; retval = rts51x_bulk_transport(us, 0, cmnd, 12, - data, len, DMA_FROM_DEVICE, NULL); - if (retval != USB_STOR_TRANSPORT_GOOD) + buf, len, DMA_FROM_DEVICE, NULL); + if (retval != USB_STOR_TRANSPORT_GOOD) { + kfree(buf); return -EIO; + } + memcpy(data, buf, len); + kfree(buf); return 0; } @@ -342,6 +396,12 @@ static int rts51x_write_mem(struct us_data *us, u16 addr, u8 *data, u16 len) { int retval; u8 cmnd[12] = { 0 }; + u8 *buf; + + buf = kmalloc(len, GFP_NOIO); + if (buf == NULL) + return USB_STOR_TRANSPORT_ERROR; + memcpy(buf, data, len); US_DEBUGP("%s, addr = 0x%x, len = %d\n", __func__, addr, len); @@ -353,7 +413,8 @@ static int rts51x_write_mem(struct us_data *us, u16 addr, u8 *data, u16 len) cmnd[5] = (u8) len; retval = rts51x_bulk_transport(us, 0, cmnd, 12, - data, len, DMA_TO_DEVICE, NULL); + buf, len, DMA_TO_DEVICE, NULL); + kfree(buf); if (retval != USB_STOR_TRANSPORT_GOOD) return -EIO; @@ -365,6 +426,11 @@ static int rts51x_read_status(struct us_data *us, { int retval; u8 cmnd[12] = { 0 }; + u8 *buf; + + buf = kmalloc(len, GFP_NOIO); + if (buf == NULL) + return USB_STOR_TRANSPORT_ERROR; US_DEBUGP("%s, lun = %d\n", __func__, lun); @@ -372,10 +438,14 @@ static int rts51x_read_status(struct us_data *us, cmnd[1] = 0x09; retval = rts51x_bulk_transport(us, lun, cmnd, 12, - status, len, DMA_FROM_DEVICE, actlen); - if (retval != USB_STOR_TRANSPORT_GOOD) + buf, len, DMA_FROM_DEVICE, actlen); + if (retval != USB_STOR_TRANSPORT_GOOD) { + kfree(buf); return -EIO; + } + memcpy(status, buf, len); + kfree(buf); return 0; } @@ -434,6 +504,29 @@ static int enable_oscillator(struct us_data *us) return 0; } +static int __do_config_autodelink(struct us_data *us, u8 *data, u16 len) +{ + int retval; + u16 addr = 0xFE47; + u8 cmnd[12] = {0}; + + US_DEBUGP("%s, addr = 0x%x, len = %d\n", __FUNCTION__, addr, len); + + cmnd[0] = 0xF0; + cmnd[1] = 0x0E; + cmnd[2] = (u8)(addr >> 8); + cmnd[3] = (u8)addr; + cmnd[4] = (u8)(len >> 8); + cmnd[5] = (u8)len; + + retval = rts51x_bulk_transport_special(us, 0, cmnd, 12, data, len, DMA_TO_DEVICE, NULL); + if (retval != USB_STOR_TRANSPORT_GOOD) { + return -EIO; + } + + return 0; +} + static int do_config_autodelink(struct us_data *us, int enable, int force) { int retval; @@ -454,7 +547,8 @@ static int do_config_autodelink(struct us_data *us, int enable, int force) US_DEBUGP("In %s,set 0xfe47 to 0x%x\n", __func__, value); - retval = rts51x_write_mem(us, 0xFE47, &value, 1); + /* retval = rts51x_write_mem(us, 0xFE47, &value, 1); */ + retval = __do_config_autodelink(us, &value, 1); if (retval < 0) return -EIO; @@ -486,7 +580,8 @@ static int config_autodelink_after_power_on(struct us_data *us) SET_BIT(value, 7); - retval = rts51x_write_mem(us, 0xFE47, &value, 1); + /* retval = rts51x_write_mem(us, 0xFE47, &value, 1); */ + retval = __do_config_autodelink(us, &value, 1); if (retval < 0) return -EIO; @@ -507,7 +602,8 @@ static int config_autodelink_after_power_on(struct us_data *us) CLR_BIT(value, 7); } - retval = rts51x_write_mem(us, 0xFE47, &value, 1); + /* retval = rts51x_write_mem(us, 0xFE47, &value, 1); */ + retval = __do_config_autodelink(us, &value, 1); if (retval < 0) return -EIO; @@ -584,7 +680,8 @@ static int config_autodelink_before_power_down(struct us_data *us) if (CHECK_ID(chip, 0x0138, 0x3882)) SET_BIT(value, 2); - retval = rts51x_write_mem(us, 0xFE47, &value, 1); + /* retval = rts51x_write_mem(us, 0xFE47, &value, 1); */ + retval = __do_config_autodelink(us, &value, 1); if (retval < 0) return -EIO; } diff --git a/drivers/usb/storage/transport.c b/drivers/usb/storage/transport.c index e8ae21b2d387..ff32390d61e5 100644 --- a/drivers/usb/storage/transport.c +++ b/drivers/usb/storage/transport.c @@ -691,6 +691,9 @@ void usb_stor_invoke_transport(struct scsi_cmnd *srb, struct us_data *us) int temp_result; struct scsi_eh_save ses; int sense_size = US_SENSE_SIZE; + struct scsi_sense_hdr sshdr; + const u8 *scdd; + u8 fm_ili; /* device supports and needs bigger sense buffer */ if (us->fflags & US_FL_SANE_SENSE) @@ -774,32 +777,30 @@ Retry_Sense: srb->sense_buffer[7] = (US_SENSE_SIZE - 8); } + scsi_normalize_sense(srb->sense_buffer, SCSI_SENSE_BUFFERSIZE, + &sshdr); + US_DEBUGP("-- Result from auto-sense is %d\n", temp_result); US_DEBUGP("-- code: 0x%x, key: 0x%x, ASC: 0x%x, ASCQ: 0x%x\n", - srb->sense_buffer[0], - srb->sense_buffer[2] & 0xf, - srb->sense_buffer[12], - srb->sense_buffer[13]); + sshdr.response_code, sshdr.sense_key, + sshdr.asc, sshdr.ascq); #ifdef CONFIG_USB_STORAGE_DEBUG - usb_stor_show_sense( - srb->sense_buffer[2] & 0xf, - srb->sense_buffer[12], - srb->sense_buffer[13]); + usb_stor_show_sense(sshdr.sense_key, sshdr.asc, sshdr.ascq); #endif /* set the result so the higher layers expect this data */ srb->result = SAM_STAT_CHECK_CONDITION; + scdd = scsi_sense_desc_find(srb->sense_buffer, + SCSI_SENSE_BUFFERSIZE, 4); + fm_ili = (scdd ? scdd[3] : srb->sense_buffer[2]) & 0xA0; + /* We often get empty sense data. This could indicate that * everything worked or that there was an unspecified * problem. We have to decide which. */ - if ( /* Filemark 0, ignore EOM, ILI 0, no sense */ - (srb->sense_buffer[2] & 0xaf) == 0 && - /* No ASC or ASCQ */ - srb->sense_buffer[12] == 0 && - srb->sense_buffer[13] == 0) { - + if (sshdr.sense_key == 0 && sshdr.asc == 0 && sshdr.ascq == 0 && + fm_ili == 0) { /* If things are really okay, then let's show that. * Zero out the sense buffer so the higher layers * won't realize we did an unsolicited auto-sense. @@ -814,7 +815,10 @@ Retry_Sense: */ } else { srb->result = DID_ERROR << 16; - srb->sense_buffer[2] = HARDWARE_ERROR; + if ((sshdr.response_code & 0x72) == 0x72) + srb->sense_buffer[1] = HARDWARE_ERROR; + else + srb->sense_buffer[2] = HARDWARE_ERROR; } } } diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c index 0ca095820f3e..c325e69415a1 100644 --- a/drivers/usb/storage/usb.c +++ b/drivers/usb/storage/usb.c @@ -831,12 +831,22 @@ static int usb_stor_scan_thread(void * __us) dev_dbg(dev, "device found\n"); - set_freezable(); - /* Wait for the timeout to expire or for a disconnect */ + set_freezable_with_signal(); + /* + * Wait for the timeout to expire or for a disconnect + * + * We can't freeze in this thread or we risk causing khubd to + * fail to freeze, but we can't be non-freezable either. Nor can + * khubd freeze while waiting for scanning to complete as it may + * hold the device lock, causing a hang when suspending devices. + * So we request a fake signal when freezing and use + * interruptible sleep to kick us out of our wait early when + * freezing happens. + */ if (delay_use > 0) { dev_dbg(dev, "waiting for device to settle " "before scanning\n"); - wait_event_freezable_timeout(us->delay_wait, + wait_event_interruptible_timeout(us->delay_wait, test_bit(US_FLIDX_DONT_SCAN, &us->dflags), delay_use * HZ); } diff --git a/drivers/usb/usb-common.c b/drivers/usb/usb-common.c new file mode 100644 index 000000000000..d29503e954ab --- /dev/null +++ b/drivers/usb/usb-common.c @@ -0,0 +1,35 @@ +/* + * Provides code common for host and device side USB. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation, version 2. + * + * If either host side (ie. CONFIG_USB=y) or device side USB stack + * (ie. CONFIG_USB_GADGET=y) is compiled in the kernel, this module is + * compiled-in as well. Otherwise, if either of the two stacks is + * compiled as module, this file is compiled as module as well. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/usb/ch9.h> + +const char *usb_speed_string(enum usb_device_speed speed) +{ + static const char *const names[] = { + [USB_SPEED_UNKNOWN] = "UNKNOWN", + [USB_SPEED_LOW] = "low-speed", + [USB_SPEED_FULL] = "full-speed", + [USB_SPEED_HIGH] = "high-speed", + [USB_SPEED_WIRELESS] = "wireless", + [USB_SPEED_SUPER] = "super-speed", + }; + + if (speed < 0 || speed >= ARRAY_SIZE(names)) + speed = USB_SPEED_UNKNOWN; + return names[speed]; +} +EXPORT_SYMBOL_GPL(usb_speed_string); + +MODULE_LICENSE("GPL"); diff --git a/drivers/usb/usb-skeleton.c b/drivers/usb/usb-skeleton.c index e24ce3123071..32d6fc953904 100644 --- a/drivers/usb/usb-skeleton.c +++ b/drivers/usb/usb-skeleton.c @@ -555,7 +555,7 @@ static int skel_probe(struct usb_interface *interface, if (!dev->bulk_in_endpointAddr && usb_endpoint_is_bulk_in(endpoint)) { /* we found a bulk in endpoint */ - buffer_size = le16_to_cpu(endpoint->wMaxPacketSize); + buffer_size = usb_endpoint_maxp(endpoint); dev->bulk_in_size = buffer_size; dev->bulk_in_endpointAddr = endpoint->bEndpointAddress; dev->bulk_in_buffer = kmalloc(buffer_size, GFP_KERNEL); diff --git a/drivers/usb/wusbcore/wa-hc.c b/drivers/usb/wusbcore/wa-hc.c index 59a748a0e5da..0d1863c9edde 100644 --- a/drivers/usb/wusbcore/wa-hc.c +++ b/drivers/usb/wusbcore/wa-hc.c @@ -43,7 +43,7 @@ int wa_create(struct wahc *wa, struct usb_interface *iface) /* Fill up Data Transfer EP pointers */ wa->dti_epd = &iface->cur_altsetting->endpoint[1].desc; wa->dto_epd = &iface->cur_altsetting->endpoint[2].desc; - wa->xfer_result_size = le16_to_cpu(wa->dti_epd->wMaxPacketSize); + wa->xfer_result_size = usb_endpoint_maxp(wa->dti_epd); wa->xfer_result = kmalloc(wa->xfer_result_size, GFP_KERNEL); if (wa->xfer_result == NULL) goto error_xfer_result_alloc; |