diff options
Diffstat (limited to 'drivers/usb')
| -rw-r--r-- | drivers/usb/Kconfig | 2 | ||||
| -rw-r--r-- | drivers/usb/Makefile | 2 | ||||
| -rw-r--r-- | drivers/usb/otg/Kconfig | 141 | ||||
| -rw-r--r-- | drivers/usb/otg/Makefile | 21 | ||||
| -rw-r--r-- | drivers/usb/phy/Kconfig | 168 | ||||
| -rw-r--r-- | drivers/usb/phy/Makefile | 24 | ||||
| -rw-r--r-- | drivers/usb/phy/ab8500-usb.c (renamed from drivers/usb/otg/ab8500-usb.c) | 0 | ||||
| -rw-r--r-- | drivers/usb/phy/fsl_otg.c (renamed from drivers/usb/otg/fsl_otg.c) | 0 | ||||
| -rw-r--r-- | drivers/usb/phy/fsl_otg.h (renamed from drivers/usb/otg/fsl_otg.h) | 0 | ||||
| -rw-r--r-- | drivers/usb/phy/gpio_vbus.c (renamed from drivers/usb/otg/gpio_vbus.c) | 0 | ||||
| -rw-r--r-- | drivers/usb/phy/isp1301_omap.c (renamed from drivers/usb/otg/isp1301_omap.c) | 0 | ||||
| -rw-r--r-- | drivers/usb/phy/msm_otg.c (renamed from drivers/usb/otg/msm_otg.c) | 0 | ||||
| -rw-r--r-- | drivers/usb/phy/mv_otg.c (renamed from drivers/usb/otg/mv_otg.c) | 0 | ||||
| -rw-r--r-- | drivers/usb/phy/mv_otg.h (renamed from drivers/usb/otg/mv_otg.h) | 0 | ||||
| -rw-r--r-- | drivers/usb/phy/mxs-phy.c (renamed from drivers/usb/otg/mxs-phy.c) | 0 | ||||
| -rw-r--r-- | drivers/usb/phy/nop-usb-xceiv.c (renamed from drivers/usb/otg/nop-usb-xceiv.c) | 0 | ||||
| -rw-r--r-- | drivers/usb/phy/otg_fsm.c (renamed from drivers/usb/otg/otg_fsm.c) | 0 | ||||
| -rw-r--r-- | drivers/usb/phy/otg_fsm.h (renamed from drivers/usb/otg/otg_fsm.h) | 0 | ||||
| -rw-r--r-- | drivers/usb/phy/twl4030-usb.c (renamed from drivers/usb/otg/twl4030-usb.c) | 0 | ||||
| -rw-r--r-- | drivers/usb/phy/twl6030-usb.c (renamed from drivers/usb/otg/twl6030-usb.c) | 0 | ||||
| -rw-r--r-- | drivers/usb/phy/ulpi.c (renamed from drivers/usb/otg/ulpi.c) | 0 | ||||
| -rw-r--r-- | drivers/usb/phy/ulpi_viewport.c (renamed from drivers/usb/otg/ulpi_viewport.c) | 0 |
22 files changed, 171 insertions, 187 deletions
diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig index 640ae6c6d2d2..2c481b808276 100644 --- a/drivers/usb/Kconfig +++ b/drivers/usb/Kconfig @@ -186,6 +186,4 @@ source "drivers/usb/atm/Kconfig" source "drivers/usb/gadget/Kconfig" -source "drivers/usb/otg/Kconfig" - endif # USB_SUPPORT diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile index 8f5ebced5df0..860306b14392 100644 --- a/drivers/usb/Makefile +++ b/drivers/usb/Makefile @@ -6,8 +6,6 @@ obj-$(CONFIG_USB) += core/ -obj-$(CONFIG_USB_OTG_UTILS) += otg/ - obj-$(CONFIG_USB_DWC3) += dwc3/ obj-$(CONFIG_USB_MON) += mon/ diff --git a/drivers/usb/otg/Kconfig b/drivers/usb/otg/Kconfig deleted file mode 100644 index 37962c99ff1e..000000000000 --- a/drivers/usb/otg/Kconfig +++ /dev/null @@ -1,141 +0,0 @@ -# -# USB OTG infrastructure may be needed for peripheral-only, host-only, -# or OTG-capable configurations when OTG transceivers or controllers -# are used. -# - -comment "OTG and related infrastructure" - -config USB_OTG_UTILS - bool - help - Select this to make sure the build includes objects from - the OTG infrastructure directory. - -if USB || USB_GADGET - -# -# USB Transceiver Drivers -# -config USB_GPIO_VBUS - tristate "GPIO based peripheral-only VBUS sensing 'transceiver'" - depends on GENERIC_GPIO - select USB_OTG_UTILS - help - Provides simple GPIO VBUS sensing for controllers with an - internal transceiver via the usb_phy interface, and - optionally control of a D+ pullup GPIO as well as a VBUS - current limit regulator. - -config ISP1301_OMAP - tristate "Philips ISP1301 with OMAP OTG" - depends on I2C && ARCH_OMAP_OTG - select USB_OTG_UTILS - help - If you say yes here you get support for the Philips ISP1301 - USB-On-The-Go transceiver working with the OMAP OTG controller. - The ISP1301 is a full speed USB transceiver which is used in - products including H2, H3, and H4 development boards for Texas - Instruments OMAP processors. - - This driver can also be built as a module. If so, the module - will be called isp1301_omap. - -config USB_ULPI - bool "Generic ULPI Transceiver Driver" - depends on ARM - select USB_OTG_UTILS - help - Enable this to support ULPI connected USB OTG transceivers which - are likely found on embedded boards. - -config USB_ULPI_VIEWPORT - bool - depends on USB_ULPI - help - Provides read/write operations to the ULPI phy register set for - controllers with a viewport register (e.g. Chipidea/ARC controllers). - -config TWL4030_USB - tristate "TWL4030 USB Transceiver Driver" - depends on TWL4030_CORE && REGULATOR_TWL4030 && USB_MUSB_OMAP2PLUS - select USB_OTG_UTILS - help - Enable this to support the USB OTG transceiver on TWL4030 - family chips (including the TWL5030 and TPS659x0 devices). - This transceiver supports high and full speed devices plus, - in host mode, low speed. - -config TWL6030_USB - tristate "TWL6030 USB Transceiver Driver" - depends on TWL4030_CORE && OMAP_USB2 && USB_MUSB_OMAP2PLUS - select USB_OTG_UTILS - help - Enable this to support the USB OTG transceiver on TWL6030 - family chips. This TWL6030 transceiver has the VBUS and ID GND - and OTG SRP events capabilities. For all other transceiver functionality - UTMI PHY is embedded in OMAP4430. The internal PHY configurations APIs - are hooked to this driver through platform_data structure. - The definition of internal PHY APIs are in the mach-omap2 layer. - -config NOP_USB_XCEIV - tristate "NOP USB Transceiver Driver" - select USB_OTG_UTILS - help - This driver is to be used by all the usb transceiver which are either - built-in with usb ip or which are autonomous and doesn't require any - phy programming such as ISP1x04 etc. - -config USB_MSM_OTG - tristate "OTG support for Qualcomm on-chip USB controller" - depends on (USB || USB_GADGET) && ARCH_MSM - select USB_OTG_UTILS - help - Enable this to support the USB OTG transceiver on MSM chips. It - handles PHY initialization, clock management, and workarounds - required after resetting the hardware and power management. - This driver is required even for peripheral only or host only - mode configurations. - This driver is not supported on boards like trout which - has an external PHY. - -config AB8500_USB - tristate "AB8500 USB Transceiver Driver" - depends on AB8500_CORE - select USB_OTG_UTILS - help - Enable this to support the USB OTG transceiver in AB8500 chip. - This transceiver supports high and full speed devices plus, - in host mode, low speed. - -config FSL_USB2_OTG - bool "Freescale USB OTG Transceiver Driver" - depends on USB_EHCI_FSL && USB_FSL_USB2 && USB_SUSPEND - select USB_OTG - select USB_OTG_UTILS - help - Enable this to support Freescale USB OTG transceiver. - -config USB_MXS_PHY - tristate "Freescale MXS USB PHY support" - depends on ARCH_MXC || ARCH_MXS - select STMP_DEVICE - select USB_OTG_UTILS - help - Enable this to support the Freescale MXS USB PHY. - - MXS Phy is used by some of the i.MX SoCs, for example imx23/28/6x. - -config USB_MV_OTG - tristate "Marvell USB OTG support" - depends on USB_EHCI_MV && USB_MV_UDC && USB_SUSPEND - select USB_OTG - select USB_OTG_UTILS - help - Say Y here if you want to build Marvell USB OTG transciever - driver in kernel (including PXA and MMP series). This driver - implements role switch between EHCI host driver and gadget driver. - - To compile this driver as a module, choose M here. - -endif # USB || OTG diff --git a/drivers/usb/otg/Makefile b/drivers/usb/otg/Makefile deleted file mode 100644 index 6abc45388e24..000000000000 --- a/drivers/usb/otg/Makefile +++ /dev/null @@ -1,21 +0,0 @@ -# -# OTG infrastructure and transceiver drivers -# - -ccflags-$(CONFIG_USB_DEBUG) := -DDEBUG -ccflags-$(CONFIG_USB_GADGET_DEBUG) += -DDEBUG - -# transceiver drivers -obj-$(CONFIG_USB_GPIO_VBUS) += gpio_vbus.o -obj-$(CONFIG_ISP1301_OMAP) += isp1301_omap.o -obj-$(CONFIG_TWL4030_USB) += twl4030-usb.o -obj-$(CONFIG_TWL6030_USB) += twl6030-usb.o -obj-$(CONFIG_NOP_USB_XCEIV) += nop-usb-xceiv.o -obj-$(CONFIG_USB_ULPI) += ulpi.o -obj-$(CONFIG_USB_ULPI_VIEWPORT) += ulpi_viewport.o -obj-$(CONFIG_USB_MSM_OTG) += msm_otg.o -obj-$(CONFIG_AB8500_USB) += ab8500-usb.o -fsl_usb2_otg-objs := fsl_otg.o otg_fsm.o -obj-$(CONFIG_FSL_USB2_OTG) += fsl_usb2_otg.o -obj-$(CONFIG_USB_MXS_PHY) += mxs-phy.o -obj-$(CONFIG_USB_MV_OTG) += mv_otg.o diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig index 65217a590068..32ce740a9dd5 100644 --- a/drivers/usb/phy/Kconfig +++ b/drivers/usb/phy/Kconfig @@ -4,6 +4,73 @@ comment "USB Physical Layer drivers" depends on USB || USB_GADGET +config USB_OTG_UTILS + bool + help + Select this to make sure the build includes objects from + the OTG infrastructure directory. + +if USB || USB_GADGET + +# +# USB Transceiver Drivers +# +config AB8500_USB + tristate "AB8500 USB Transceiver Driver" + depends on AB8500_CORE + select USB_OTG_UTILS + help + Enable this to support the USB OTG transceiver in AB8500 chip. + This transceiver supports high and full speed devices plus, + in host mode, low speed. + +config FSL_USB2_OTG + bool "Freescale USB OTG Transceiver Driver" + depends on USB_EHCI_FSL && USB_FSL_USB2 && USB_SUSPEND + select USB_OTG + select USB_OTG_UTILS + help + Enable this to support Freescale USB OTG transceiver. + +config ISP1301_OMAP + tristate "Philips ISP1301 with OMAP OTG" + depends on I2C && ARCH_OMAP_OTG + select USB_OTG_UTILS + help + If you say yes here you get support for the Philips ISP1301 + USB-On-The-Go transceiver working with the OMAP OTG controller. + The ISP1301 is a full speed USB transceiver which is used in + products including H2, H3, and H4 development boards for Texas + Instruments OMAP processors. + + This driver can also be built as a module. If so, the module + will be called isp1301_omap. + +config MV_U3D_PHY + bool "Marvell USB 3.0 PHY controller Driver" + depends on USB_MV_U3D + select USB_OTG_UTILS + help + Enable this to support Marvell USB 3.0 phy controller for Marvell + SoC. + +config NOP_USB_XCEIV + tristate "NOP USB Transceiver Driver" + select USB_OTG_UTILS + help + This driver is to be used by all the usb transceiver which are either + built-in with usb ip or which are autonomous and doesn't require any + phy programming such as ISP1x04 etc. + +config OMAP_CONTROL_USB + tristate "OMAP CONTROL USB Driver" + help + Enable this to add support for the USB part present in the control + module. This driver has API to power on the USB2 PHY and to write to + the mailbox. The mailbox is present only in omap4 and the register to + power on the USB2 PHY is present in OMAP4 and OMAP5. OMAP5 has an + additional register to power on USB3 PHY. + config OMAP_USB2 tristate "OMAP USB2 PHY Driver" depends on ARCH_OMAP2PLUS @@ -25,14 +92,45 @@ config OMAP_USB3 This driver interacts with the "OMAP Control USB Driver" to power on/off the PHY. -config OMAP_CONTROL_USB - tristate "OMAP CONTROL USB Driver" +config SAMSUNG_USBPHY + bool "Samsung USB PHY controller Driver" + depends on USB_S3C_HSOTG || USB_EHCI_S5P || USB_OHCI_EXYNOS + select USB_OTG_UTILS help - Enable this to add support for the USB part present in the control - module. This driver has API to power on the USB2 PHY and to write to - the mailbox. The mailbox is present only in omap4 and the register to - power on the USB2 PHY is present in OMAP4 and OMAP5. OMAP5 has an - additional register to power on USB3 PHY. + Enable this to support Samsung USB phy controller for samsung + SoCs. + +config TWL4030_USB + tristate "TWL4030 USB Transceiver Driver" + depends on TWL4030_CORE && REGULATOR_TWL4030 && USB_MUSB_OMAP2PLUS + select USB_OTG_UTILS + help + Enable this to support the USB OTG transceiver on TWL4030 + family chips (including the TWL5030 and TPS659x0 devices). + This transceiver supports high and full speed devices plus, + in host mode, low speed. + +config TWL6030_USB + tristate "TWL6030 USB Transceiver Driver" + depends on TWL4030_CORE && OMAP_USB2 && USB_MUSB_OMAP2PLUS + select USB_OTG_UTILS + help + Enable this to support the USB OTG transceiver on TWL6030 + family chips. This TWL6030 transceiver has the VBUS and ID GND + and OTG SRP events capabilities. For all other transceiver functionality + UTMI PHY is embedded in OMAP4430. The internal PHY configurations APIs + are hooked to this driver through platform_data structure. + The definition of internal PHY APIs are in the mach-omap2 layer. + +config USB_GPIO_VBUS + tristate "GPIO based peripheral-only VBUS sensing 'transceiver'" + depends on GENERIC_GPIO + select USB_OTG_UTILS + help + Provides simple GPIO VBUS sensing for controllers with an + internal transceiver via the usb_phy interface, and + optionally control of a D+ pullup GPIO as well as a VBUS + current limit regulator. config USB_ISP1301 tristate "NXP ISP1301 USB transceiver support" @@ -46,13 +144,40 @@ config USB_ISP1301 To compile this driver as a module, choose M here: the module will be called isp1301. -config MV_U3D_PHY - bool "Marvell USB 3.0 PHY controller Driver" - depends on USB_MV_U3D +config USB_MSM_OTG + tristate "OTG support for Qualcomm on-chip USB controller" + depends on (USB || USB_GADGET) && ARCH_MSM select USB_OTG_UTILS help - Enable this to support Marvell USB 3.0 phy controller for Marvell - SoC. + Enable this to support the USB OTG transceiver on MSM chips. It + handles PHY initialization, clock management, and workarounds + required after resetting the hardware and power management. + This driver is required even for peripheral only or host only + mode configurations. + This driver is not supported on boards like trout which + has an external PHY. + +config USB_MV_OTG + tristate "Marvell USB OTG support" + depends on USB_EHCI_MV && USB_MV_UDC && USB_SUSPEND + select USB_OTG + select USB_OTG_UTILS + help + Say Y here if you want to build Marvell USB OTG transciever + driver in kernel (including PXA and MMP series). This driver + implements role switch between EHCI host driver and gadget driver. + + To compile this driver as a module, choose M here. + +config USB_MXS_PHY + tristate "Freescale MXS USB PHY support" + depends on ARCH_MXC || ARCH_MXS + select STMP_DEVICE + select USB_OTG_UTILS + help + Enable this to support the Freescale MXS USB PHY. + + MXS Phy is used by some of the i.MX SoCs, for example imx23/28/6x. config USB_RCAR_PHY tristate "Renesas R-Car USB phy support" @@ -66,10 +191,19 @@ config USB_RCAR_PHY To compile this driver as a module, choose M here: the module will be called rcar-phy. -config SAMSUNG_USBPHY - bool "Samsung USB PHY controller Driver" - depends on USB_S3C_HSOTG || USB_EHCI_S5P || USB_OHCI_EXYNOS +config USB_ULPI + bool "Generic ULPI Transceiver Driver" + depends on ARM select USB_OTG_UTILS help - Enable this to support Samsung USB phy controller for samsung - SoCs. + Enable this to support ULPI connected USB OTG transceivers which + are likely found on embedded boards. + +config USB_ULPI_VIEWPORT + bool + depends on USB_ULPI + help + Provides read/write operations to the ULPI phy register set for + controllers with a viewport register (e.g. Chipidea/ARC controllers). + +endif # USB || OTG diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile index 9fa6327d4c52..34488ceef491 100644 --- a/drivers/usb/phy/Makefile +++ b/drivers/usb/phy/Makefile @@ -5,11 +5,27 @@ ccflags-$(CONFIG_USB_DEBUG) := -DDEBUG obj-$(CONFIG_USB_OTG_UTILS) += phy.o + +# transceiver drivers, keep the list sorted + +obj-$(CONFIG_AB8500_USB) += ab8500-usb.o +fsl_usb2_otg-objs := fsl_otg.o otg_fsm.o +obj-$(CONFIG_FSL_USB2_OTG) += fsl_usb2_otg.o +obj-$(CONFIG_ISP1301_OMAP) += isp1301_omap.o +obj-$(CONFIG_MV_U3D_PHY) += mv_u3d_phy.o +obj-$(CONFIG_NOP_USB_XCEIV) += nop-usb-xceiv.o +obj-$(CONFIG_OMAP_CONTROL_USB) += omap-control-usb.o obj-$(CONFIG_OMAP_USB2) += omap-usb2.o obj-$(CONFIG_OMAP_USB3) += omap-usb3.o -obj-$(CONFIG_OMAP_CONTROL_USB) += omap-control-usb.o +obj-$(CONFIG_SAMSUNG_USBPHY) += samsung-usbphy.o +obj-$(CONFIG_TWL4030_USB) += twl4030-usb.o +obj-$(CONFIG_TWL6030_USB) += twl6030-usb.o +obj-$(CONFIG_USB_EHCI_TEGRA) += tegra_usb_phy.o +obj-$(CONFIG_USB_GPIO_VBUS) += gpio_vbus.o obj-$(CONFIG_USB_ISP1301) += isp1301.o -obj-$(CONFIG_MV_U3D_PHY) += mv_u3d_phy.o -obj-$(CONFIG_USB_EHCI_TEGRA) += tegra_usb_phy.o +obj-$(CONFIG_USB_MSM_OTG) += msm_otg.o +obj-$(CONFIG_USB_MV_OTG) += mv_otg.o +obj-$(CONFIG_USB_MXS_PHY) += mxs-phy.o obj-$(CONFIG_USB_RCAR_PHY) += rcar-phy.o -obj-$(CONFIG_SAMSUNG_USBPHY) += samsung-usbphy.o +obj-$(CONFIG_USB_ULPI) += ulpi.o +obj-$(CONFIG_USB_ULPI_VIEWPORT) += ulpi_viewport.o diff --git a/drivers/usb/otg/ab8500-usb.c b/drivers/usb/phy/ab8500-usb.c index 2d86f26a0183..2d86f26a0183 100644 --- a/drivers/usb/otg/ab8500-usb.c +++ b/drivers/usb/phy/ab8500-usb.c diff --git a/drivers/usb/otg/fsl_otg.c b/drivers/usb/phy/fsl_otg.c index 72a2a00c2487..72a2a00c2487 100644 --- a/drivers/usb/otg/fsl_otg.c +++ b/drivers/usb/phy/fsl_otg.c diff --git a/drivers/usb/otg/fsl_otg.h b/drivers/usb/phy/fsl_otg.h index ca266280895d..ca266280895d 100644 --- a/drivers/usb/otg/fsl_otg.h +++ b/drivers/usb/phy/fsl_otg.h diff --git a/drivers/usb/otg/gpio_vbus.c b/drivers/usb/phy/gpio_vbus.c index a7d4ac591982..a7d4ac591982 100644 --- a/drivers/usb/otg/gpio_vbus.c +++ b/drivers/usb/phy/gpio_vbus.c diff --git a/drivers/usb/otg/isp1301_omap.c b/drivers/usb/phy/isp1301_omap.c index 8fe0c3b95261..8fe0c3b95261 100644 --- a/drivers/usb/otg/isp1301_omap.c +++ b/drivers/usb/phy/isp1301_omap.c diff --git a/drivers/usb/otg/msm_otg.c b/drivers/usb/phy/msm_otg.c index 749fbf41fb6f..749fbf41fb6f 100644 --- a/drivers/usb/otg/msm_otg.c +++ b/drivers/usb/phy/msm_otg.c diff --git a/drivers/usb/otg/mv_otg.c b/drivers/usb/phy/mv_otg.c index b6a9be31133b..b6a9be31133b 100644 --- a/drivers/usb/otg/mv_otg.c +++ b/drivers/usb/phy/mv_otg.c diff --git a/drivers/usb/otg/mv_otg.h b/drivers/usb/phy/mv_otg.h index 8a9e351b36ba..8a9e351b36ba 100644 --- a/drivers/usb/otg/mv_otg.h +++ b/drivers/usb/phy/mv_otg.h diff --git a/drivers/usb/otg/mxs-phy.c b/drivers/usb/phy/mxs-phy.c index 9d4381e64d51..9d4381e64d51 100644 --- a/drivers/usb/otg/mxs-phy.c +++ b/drivers/usb/phy/mxs-phy.c diff --git a/drivers/usb/otg/nop-usb-xceiv.c b/drivers/usb/phy/nop-usb-xceiv.c index 2b10cc969bbb..2b10cc969bbb 100644 --- a/drivers/usb/otg/nop-usb-xceiv.c +++ b/drivers/usb/phy/nop-usb-xceiv.c diff --git a/drivers/usb/otg/otg_fsm.c b/drivers/usb/phy/otg_fsm.c index 1f729a15decb..1f729a15decb 100644 --- a/drivers/usb/otg/otg_fsm.c +++ b/drivers/usb/phy/otg_fsm.c diff --git a/drivers/usb/otg/otg_fsm.h b/drivers/usb/phy/otg_fsm.h index c30a2e1d9e46..c30a2e1d9e46 100644 --- a/drivers/usb/otg/otg_fsm.h +++ b/drivers/usb/phy/otg_fsm.h diff --git a/drivers/usb/otg/twl4030-usb.c b/drivers/usb/phy/twl4030-usb.c index a994715a3101..a994715a3101 100644 --- a/drivers/usb/otg/twl4030-usb.c +++ b/drivers/usb/phy/twl4030-usb.c diff --git a/drivers/usb/otg/twl6030-usb.c b/drivers/usb/phy/twl6030-usb.c index 8cd6cf49bdbd..8cd6cf49bdbd 100644 --- a/drivers/usb/otg/twl6030-usb.c +++ b/drivers/usb/phy/twl6030-usb.c diff --git a/drivers/usb/otg/ulpi.c b/drivers/usb/phy/ulpi.c index 217339dd7a90..217339dd7a90 100644 --- a/drivers/usb/otg/ulpi.c +++ b/drivers/usb/phy/ulpi.c diff --git a/drivers/usb/otg/ulpi_viewport.c b/drivers/usb/phy/ulpi_viewport.c index c5ba7e5423fc..c5ba7e5423fc 100644 --- a/drivers/usb/otg/ulpi_viewport.c +++ b/drivers/usb/phy/ulpi_viewport.c |