diff options
Diffstat (limited to 'drivers/usb/storage/freecom.c')
| -rw-r--r-- | drivers/usb/storage/freecom.c | 75 |
1 files changed, 50 insertions, 25 deletions
diff --git a/drivers/usb/storage/freecom.c b/drivers/usb/storage/freecom.c index 3f2b08966b9d..c0a5d954414b 100644 --- a/drivers/usb/storage/freecom.c +++ b/drivers/usb/storage/freecom.c @@ -1,4 +1,5 @@ -/* Driver for Freecom USB/IDE adaptor +/* + * Driver for Freecom USB/IDE adaptor * * Freecom v0.1: * @@ -84,25 +85,33 @@ struct freecom_status { u8 Pad[60]; }; -/* Freecom stuffs the interrupt status in the INDEX_STAT bit of the ide - * register. */ +/* + * Freecom stuffs the interrupt status in the INDEX_STAT bit of the ide + * register. + */ #define FCM_INT_STATUS 0x02 /* INDEX_STAT */ #define FCM_STATUS_BUSY 0x80 -/* These are the packet types. The low bit indicates that this command - * should wait for an interrupt. */ +/* + * These are the packet types. The low bit indicates that this command + * should wait for an interrupt. + */ #define FCM_PACKET_ATAPI 0x21 #define FCM_PACKET_STATUS 0x20 -/* Receive data from the IDE interface. The ATAPI packet has already - * waited, so the data should be immediately available. */ +/* + * Receive data from the IDE interface. The ATAPI packet has already + * waited, so the data should be immediately available. + */ #define FCM_PACKET_INPUT 0x81 /* Send data to the IDE interface. */ #define FCM_PACKET_OUTPUT 0x01 -/* Write a value to an ide register. Or the ide register to write after - * munging the address a bit. */ +/* + * Write a value to an ide register. Or the ide register to write after + * munging the address a bit. + */ #define FCM_PACKET_IDE_WRITE 0x40 #define FCM_PACKET_IDE_READ 0xC0 @@ -251,16 +260,20 @@ static int freecom_transport(struct scsi_cmnd *srb, struct us_data *us) result = usb_stor_bulk_transfer_buf (us, opipe, fcb, FCM_PACKET_LENGTH, NULL); - /* The Freecom device will only fail if there is something wrong in + /* + * The Freecom device will only fail if there is something wrong in * USB land. It returns the status in its own registers, which - * come back in the bulk pipe. */ + * come back in the bulk pipe. + */ if (result != USB_STOR_XFER_GOOD) { usb_stor_dbg(us, "freecom transport error\n"); return USB_STOR_TRANSPORT_ERROR; } - /* There are times we can optimize out this status read, but it - * doesn't hurt us to always do it now. */ + /* + * There are times we can optimize out this status read, but it + * doesn't hurt us to always do it now. + */ result = usb_stor_bulk_transfer_buf (us, ipipe, fst, FCM_STATUS_PACKET_LENGTH, &partial); usb_stor_dbg(us, "foo Status result %d %u\n", result, partial); @@ -269,7 +282,8 @@ static int freecom_transport(struct scsi_cmnd *srb, struct us_data *us) US_DEBUG(pdump(us, (void *)fst, partial)); - /* The firmware will time-out commands after 20 seconds. Some commands + /* + * The firmware will time-out commands after 20 seconds. Some commands * can legitimately take longer than this, so we use a different * command that only waits for the interrupt and then sends status, * without having to send a new ATAPI command to the device. @@ -291,7 +305,8 @@ static int freecom_transport(struct scsi_cmnd *srb, struct us_data *us) result = usb_stor_bulk_transfer_buf (us, opipe, fcb, FCM_PACKET_LENGTH, NULL); - /* The Freecom device will only fail if there is something + /* + * The Freecom device will only fail if there is something * wrong in USB land. It returns the status in its own * registers, which come back in the bulk pipe. */ @@ -318,9 +333,11 @@ static int freecom_transport(struct scsi_cmnd *srb, struct us_data *us) return USB_STOR_TRANSPORT_FAILED; } - /* The device might not have as much data available as we + /* + * The device might not have as much data available as we * requested. If you ask for more than the device has, this reads - * and such will hang. */ + * and such will hang. + */ usb_stor_dbg(us, "Device indicates that it has %d bytes available\n", le16_to_cpu(fst->Count)); usb_stor_dbg(us, "SCSI requested %d\n", scsi_bufflen(srb)); @@ -344,16 +361,20 @@ static int freecom_transport(struct scsi_cmnd *srb, struct us_data *us) length); } - /* What we do now depends on what direction the data is supposed to - * move in. */ + /* + * What we do now depends on what direction the data is supposed to + * move in. + */ switch (us->srb->sc_data_direction) { case DMA_FROM_DEVICE: /* catch bogus "read 0 length" case */ if (!length) break; - /* Make sure that the status indicates that the device - * wants data as well. */ + /* + * Make sure that the status indicates that the device + * wants data as well. + */ if ((fst->Status & DRQ_STAT) == 0 || (fst->Reason & 3) != 2) { usb_stor_dbg(us, "SCSI wants data, drive doesn't have any\n"); return USB_STOR_TRANSPORT_FAILED; @@ -384,8 +405,10 @@ static int freecom_transport(struct scsi_cmnd *srb, struct us_data *us) /* catch bogus "write 0 length" case */ if (!length) break; - /* Make sure the status indicates that the device wants to - * send us data. */ + /* + * Make sure the status indicates that the device wants to + * send us data. + */ /* !!IMPLEMENT!! */ result = freecom_writedata (srb, us, ipipe, opipe, length); if (result != USB_STOR_TRANSPORT_GOOD) @@ -431,7 +454,8 @@ static int init_freecom(struct us_data *us) int result; char *buffer = us->iobuf; - /* The DMA-mapped I/O buffer is 64 bytes long, just right for + /* + * The DMA-mapped I/O buffer is 64 bytes long, just right for * all our packets. No need to allocate any extra buffer space. */ @@ -440,7 +464,8 @@ static int init_freecom(struct us_data *us) buffer[32] = '\0'; usb_stor_dbg(us, "String returned from FC init is: %s\n", buffer); - /* Special thanks to the people at Freecom for providing me with + /* + * Special thanks to the people at Freecom for providing me with * this "magic sequence", which they use in their Windows and MacOS * drivers to make sure that all the attached perhiperals are * properly reset. |