summaryrefslogtreecommitdiff
path: root/drivers/usb/serial
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/serial')
-rw-r--r--drivers/usb/serial/ChangeLog.history2
-rw-r--r--drivers/usb/serial/Kconfig32
-rw-r--r--drivers/usb/serial/Makefile4
-rw-r--r--drivers/usb/serial/ch341.c396
-rw-r--r--drivers/usb/serial/cp210x.c (renamed from drivers/usb/serial/cp2101.c)161
-rw-r--r--drivers/usb/serial/ftdi_sio.c29
-rw-r--r--drivers/usb/serial/generic.c9
-rw-r--r--drivers/usb/serial/ipaq.c43
-rw-r--r--drivers/usb/serial/keyspan.c2
-rw-r--r--drivers/usb/serial/opticon.c215
-rw-r--r--drivers/usb/serial/option.c86
-rw-r--r--drivers/usb/serial/qcserial.c147
-rw-r--r--drivers/usb/serial/symbolserial.c399
-rw-r--r--drivers/usb/serial/usb-serial.c78
14 files changed, 1385 insertions, 218 deletions
diff --git a/drivers/usb/serial/ChangeLog.history b/drivers/usb/serial/ChangeLog.history
index c1b279939bbf..f13fd488ebec 100644
--- a/drivers/usb/serial/ChangeLog.history
+++ b/drivers/usb/serial/ChangeLog.history
@@ -715,7 +715,7 @@ io_edgeport.c Change Log comments:
0.2 (01/30/2000) greg kroah-hartman
Milestone 1 release.
- Device is found by USB subsystem, enumerated, fimware is downloaded
+ Device is found by USB subsystem, enumerated, firmware is downloaded
and the descriptors are printed to the debug log, config is set, and
green light starts to blink. Open port works, and data can be sent
and received at the default settings of the UART. Loopback connector
diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig
index b361f05cafac..c480ea4c19f2 100644
--- a/drivers/usb/serial/Kconfig
+++ b/drivers/usb/serial/Kconfig
@@ -116,14 +116,14 @@ config USB_SERIAL_DIGI_ACCELEPORT
To compile this driver as a module, choose M here: the
module will be called digi_acceleport.
-config USB_SERIAL_CP2101
- tristate "USB CP2101 UART Bridge Controller"
+config USB_SERIAL_CP210X
+ tristate "USB CP210x family of UART Bridge Controllers"
help
- Say Y here if you want to use a CP2101/CP2102 based USB to RS232
- converter.
+ Say Y here if you want to use a CP2101/CP2102/CP2103 based USB
+ to RS232 converters.
To compile this driver as a module, choose M here: the
- module will be called cp2101.
+ module will be called cp210x.
config USB_SERIAL_CYPRESS_M8
tristate "USB Cypress M8 USB Serial Driver"
@@ -472,6 +472,15 @@ config USB_SERIAL_OTI6858
To compile this driver as a module, choose M here: the
module will be called oti6858.
+config USB_SERIAL_QUALCOMM
+ tristate "USB Qualcomm Serial modem"
+ help
+ Say Y here if you have a Qualcomm USB modem device. These are
+ usually wireless cellular modems.
+
+ To compile this driver as a module, choose M here: the
+ module will be called qcserial.
+
config USB_SERIAL_SPCP8X5
tristate "USB SPCP8x5 USB To Serial Driver"
help
@@ -509,12 +518,21 @@ config USB_SERIAL_SIERRAWIRELESS
help
Say M here if you want to use Sierra Wireless devices.
- Many deviecs have a feature known as TRU-Install, for those devices
- to work properly the USB Storage Sierra feature must be enabled.
+ Many devices have a feature known as TRU-Install. For those devices
+ to work properly, the USB Storage Sierra feature must be enabled.
To compile this driver as a module, choose M here: the
module will be called sierra.
+config USB_SERIAL_SYMBOL
+ tristate "USB Symbol Barcode driver (serial mode)"
+ help
+ Say Y here if you want to use a Symbol USB Barcode device
+ in serial emulation mode.
+
+ To compile this driver as a module, choose M here: the
+ module will be called symbolserial.
+
config USB_SERIAL_TI
tristate "USB TI 3410/5052 Serial Driver"
help
diff --git a/drivers/usb/serial/Makefile b/drivers/usb/serial/Makefile
index b75be91eb8f1..66619beb6cc0 100644
--- a/drivers/usb/serial/Makefile
+++ b/drivers/usb/serial/Makefile
@@ -15,7 +15,7 @@ obj-$(CONFIG_USB_SERIAL_AIRCABLE) += aircable.o
obj-$(CONFIG_USB_SERIAL_ARK3116) += ark3116.o
obj-$(CONFIG_USB_SERIAL_BELKIN) += belkin_sa.o
obj-$(CONFIG_USB_SERIAL_CH341) += ch341.o
-obj-$(CONFIG_USB_SERIAL_CP2101) += cp2101.o
+obj-$(CONFIG_USB_SERIAL_CP210X) += cp210x.o
obj-$(CONFIG_USB_SERIAL_CYBERJACK) += cyberjack.o
obj-$(CONFIG_USB_SERIAL_CYPRESS_M8) += cypress_m8.o
obj-$(CONFIG_USB_SERIAL_DEBUG) += usb_debug.o
@@ -45,10 +45,12 @@ obj-$(CONFIG_USB_SERIAL_OPTICON) += opticon.o
obj-$(CONFIG_USB_SERIAL_OPTION) += option.o
obj-$(CONFIG_USB_SERIAL_OTI6858) += oti6858.o
obj-$(CONFIG_USB_SERIAL_PL2303) += pl2303.o
+obj-$(CONFIG_USB_SERIAL_QUALCOMM) += qcserial.o
obj-$(CONFIG_USB_SERIAL_SAFE) += safe_serial.o
obj-$(CONFIG_USB_SERIAL_SIEMENS_MPI) += siemens_mpi.o
obj-$(CONFIG_USB_SERIAL_SIERRAWIRELESS) += sierra.o
obj-$(CONFIG_USB_SERIAL_SPCP8X5) += spcp8x5.o
+obj-$(CONFIG_USB_SERIAL_SYMBOL) += symbolserial.o
obj-$(CONFIG_USB_SERIAL_TI) += ti_usb_3410_5052.o
obj-$(CONFIG_USB_SERIAL_VISOR) += visor.o
obj-$(CONFIG_USB_SERIAL_WHITEHEAT) += whiteheat.o
diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c
index f61e3ca64305..ab4cc277aa65 100644
--- a/drivers/usb/serial/ch341.c
+++ b/drivers/usb/serial/ch341.c
@@ -1,5 +1,7 @@
/*
* Copyright 2007, Frank A Kingswood <frank@kingswood-consulting.co.uk>
+ * Copyright 2007, Werner Cornelius <werner@cornelius-consult.de>
+ * Copyright 2009, Boris Hajduk <boris@hajduk.org>
*
* ch341.c implements a serial port driver for the Winchiphead CH341.
*
@@ -21,9 +23,39 @@
#include <linux/usb/serial.h>
#include <linux/serial.h>
-#define DEFAULT_BAUD_RATE 2400
+#define DEFAULT_BAUD_RATE 9600
#define DEFAULT_TIMEOUT 1000
+/* flags for IO-Bits */
+#define CH341_BIT_RTS (1 << 6)
+#define CH341_BIT_DTR (1 << 5)
+
+/******************************/
+/* interrupt pipe definitions */
+/******************************/
+/* always 4 interrupt bytes */
+/* first irq byte normally 0x08 */
+/* second irq byte base 0x7d + below */
+/* third irq byte base 0x94 + below */
+/* fourth irq byte normally 0xee */
+
+/* second interrupt byte */
+#define CH341_MULT_STAT 0x04 /* multiple status since last interrupt event */
+
+/* status returned in third interrupt answer byte, inverted in data
+ from irq */
+#define CH341_BIT_CTS 0x01
+#define CH341_BIT_DSR 0x02
+#define CH341_BIT_RI 0x04
+#define CH341_BIT_DCD 0x08
+#define CH341_BITS_MODEM_STAT 0x0f /* all bits */
+
+/*******************************/
+/* baudrate calculation factor */
+/*******************************/
+#define CH341_BAUDBASE_FACTOR 1532620800
+#define CH341_BAUDBASE_DIVMAX 3
+
static int debug;
static struct usb_device_id id_table [] = {
@@ -34,9 +66,12 @@ static struct usb_device_id id_table [] = {
MODULE_DEVICE_TABLE(usb, id_table);
struct ch341_private {
- unsigned baud_rate;
- u8 dtr;
- u8 rts;
+ spinlock_t lock; /* access lock */
+ wait_queue_head_t delta_msr_wait; /* wait queue for modem status */
+ unsigned baud_rate; /* set baud rate */
+ u8 line_control; /* set line control value RTS/DTR */
+ u8 line_status; /* active status of modem control inputs */
+ u8 multi_status_change; /* status changed multiple since last call */
};
static int ch341_control_out(struct usb_device *dev, u8 request,
@@ -72,37 +107,28 @@ static int ch341_set_baudrate(struct usb_device *dev,
{
short a, b;
int r;
+ unsigned long factor;
+ short divisor;
dbg("ch341_set_baudrate(%d)", priv->baud_rate);
- switch (priv->baud_rate) {
- case 2400:
- a = 0xd901;
- b = 0x0038;
- break;
- case 4800:
- a = 0x6402;
- b = 0x001f;
- break;
- case 9600:
- a = 0xb202;
- b = 0x0013;
- break;
- case 19200:
- a = 0xd902;
- b = 0x000d;
- break;
- case 38400:
- a = 0x6403;
- b = 0x000a;
- break;
- case 115200:
- a = 0xcc03;
- b = 0x0008;
- break;
- default:
+
+ if (!priv->baud_rate)
return -EINVAL;
+ factor = (CH341_BAUDBASE_FACTOR / priv->baud_rate);
+ divisor = CH341_BAUDBASE_DIVMAX;
+
+ while ((factor > 0xfff0) && divisor) {
+ factor >>= 3;
+ divisor--;
}
+ if (factor > 0xfff0)
+ return -EINVAL;
+
+ factor = 0x10000 - factor;
+ a = (factor & 0xff00) | divisor;
+ b = factor & 0xff;
+
r = ch341_control_out(dev, 0x9a, 0x1312, a);
if (!r)
r = ch341_control_out(dev, 0x9a, 0x0f2c, b);
@@ -110,19 +136,18 @@ static int ch341_set_baudrate(struct usb_device *dev,
return r;
}
-static int ch341_set_handshake(struct usb_device *dev,
- struct ch341_private *priv)
+static int ch341_set_handshake(struct usb_device *dev, u8 control)
{
- dbg("ch341_set_handshake(%d,%d)", priv->dtr, priv->rts);
- return ch341_control_out(dev, 0xa4,
- ~((priv->dtr?1<<5:0)|(priv->rts?1<<6:0)), 0);
+ dbg("ch341_set_handshake(0x%02x)", control);
+ return ch341_control_out(dev, 0xa4, ~control, 0);
}
-static int ch341_get_status(struct usb_device *dev)
+static int ch341_get_status(struct usb_device *dev, struct ch341_private *priv)
{
char *buffer;
int r;
const unsigned size = 8;
+ unsigned long flags;
dbg("ch341_get_status()");
@@ -134,10 +159,15 @@ static int ch341_get_status(struct usb_device *dev)
if (r < 0)
goto out;
- /* Not having the datasheet for the CH341, we ignore the bytes returned
- * from the device. Return error if the device did not respond in time.
- */
- r = 0;
+ /* setup the private status if available */
+ if (r == 2) {
+ r = 0;
+ spin_lock_irqsave(&priv->lock, flags);
+ priv->line_status = (~(*buffer)) & CH341_BITS_MODEM_STAT;
+ priv->multi_status_change = 0;
+ spin_unlock_irqrestore(&priv->lock, flags);
+ } else
+ r = -EPROTO;
out: kfree(buffer);
return r;
@@ -180,7 +210,7 @@ static int ch341_configure(struct usb_device *dev, struct ch341_private *priv)
goto out;
/* expect 0xff 0xee */
- r = ch341_get_status(dev);
+ r = ch341_get_status(dev, priv);
if (r < 0)
goto out;
@@ -192,12 +222,12 @@ static int ch341_configure(struct usb_device *dev, struct ch341_private *priv)
if (r < 0)
goto out;
- r = ch341_set_handshake(dev, priv);
+ r = ch341_set_handshake(dev, priv->line_control);
if (r < 0)
goto out;
/* expect 0x9f 0xee */
- r = ch341_get_status(dev);
+ r = ch341_get_status(dev, priv);
out: kfree(buffer);
return r;
@@ -216,9 +246,10 @@ static int ch341_attach(struct usb_serial *serial)
if (!priv)
return -ENOMEM;
+ spin_lock_init(&priv->lock);
+ init_waitqueue_head(&priv->delta_msr_wait);
priv->baud_rate = DEFAULT_BAUD_RATE;
- priv->dtr = 1;
- priv->rts = 1;
+ priv->line_control = CH341_BIT_RTS | CH341_BIT_DTR;
r = ch341_configure(serial->dev, priv);
if (r < 0)
@@ -231,6 +262,35 @@ error: kfree(priv);
return r;
}
+static void ch341_close(struct tty_struct *tty, struct usb_serial_port *port,
+ struct file *filp)
+{
+ struct ch341_private *priv = usb_get_serial_port_data(port);
+ unsigned long flags;
+ unsigned int c_cflag;
+
+ dbg("%s - port %d", __func__, port->number);
+
+ /* shutdown our urbs */
+ dbg("%s - shutting down urbs", __func__);
+ usb_kill_urb(port->write_urb);
+ usb_kill_urb(port->read_urb);
+ usb_kill_urb(port->interrupt_in_urb);
+
+ if (tty) {
+ c_cflag = tty->termios->c_cflag;
+ if (c_cflag & HUPCL) {
+ /* drop DTR and RTS */
+ spin_lock_irqsave(&priv->lock, flags);
+ priv->line_control = 0;
+ spin_unlock_irqrestore(&priv->lock, flags);
+ ch341_set_handshake(port->serial->dev, 0);
+ }
+ }
+ wake_up_interruptible(&priv->delta_msr_wait);
+}
+
+
/* open this device, set default parameters */
static int ch341_open(struct tty_struct *tty, struct usb_serial_port *port,
struct file *filp)
@@ -242,14 +302,13 @@ static int ch341_open(struct tty_struct *tty, struct usb_serial_port *port,
dbg("ch341_open()");
priv->baud_rate = DEFAULT_BAUD_RATE;
- priv->dtr = 1;
- priv->rts = 1;
+ priv->line_control = CH341_BIT_RTS | CH341_BIT_DTR;
r = ch341_configure(serial->dev, priv);
if (r)
goto out;
- r = ch341_set_handshake(serial->dev, priv);
+ r = ch341_set_handshake(serial->dev, priv->line_control);
if (r)
goto out;
@@ -257,6 +316,16 @@ static int ch341_open(struct tty_struct *tty, struct usb_serial_port *port,
if (r)
goto out;
+ dbg("%s - submitting interrupt urb", __func__);
+ port->interrupt_in_urb->dev = serial->dev;
+ r = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
+ if (r) {
+ dev_err(&port->dev, "%s - failed submitting interrupt urb,"
+ " error %d\n", __func__, r);
+ ch341_close(tty, port, NULL);
+ return -EPROTO;
+ }
+
r = usb_serial_generic_open(tty, port, filp);
out: return r;
@@ -270,46 +339,224 @@ static void ch341_set_termios(struct tty_struct *tty,
{
struct ch341_private *priv = usb_get_serial_port_data(port);
unsigned baud_rate;
+ unsigned long flags;
dbg("ch341_set_termios()");
+ if (!tty || !tty->termios)
+ return;
+
baud_rate = tty_get_baud_rate(tty);
- switch (baud_rate) {
- case 2400:
- case 4800:
- case 9600:
- case 19200:
- case 38400:
- case 115200:
- priv->baud_rate = baud_rate;
- break;
- default:
- dbg("Rate %d not supported, using %d",
- baud_rate, DEFAULT_BAUD_RATE);
- priv->baud_rate = DEFAULT_BAUD_RATE;
+ priv->baud_rate = baud_rate;
+
+ if (baud_rate) {
+ spin_lock_irqsave(&priv->lock, flags);
+ priv->line_control |= (CH341_BIT_DTR | CH341_BIT_RTS);
+ spin_unlock_irqrestore(&priv->lock, flags);
+ ch341_set_baudrate(port->serial->dev, priv);
+ } else {
+ spin_lock_irqsave(&priv->lock, flags);
+ priv->line_control &= ~(CH341_BIT_DTR | CH341_BIT_RTS);
+ spin_unlock_irqrestore(&priv->lock, flags);
}
- ch341_set_baudrate(port->serial->dev, priv);
+ ch341_set_handshake(port->serial->dev, priv->line_control);
/* Unimplemented:
* (cflag & CSIZE) : data bits [5, 8]
* (cflag & PARENB) : parity {NONE, EVEN, ODD}
* (cflag & CSTOPB) : stop bits [1, 2]
*/
+}
+
+static int ch341_tiocmset(struct tty_struct *tty, struct file *file,
+ unsigned int set, unsigned int clear)
+{
+ struct usb_serial_port *port = tty->driver_data;
+ struct ch341_private *priv = usb_get_serial_port_data(port);
+ unsigned long flags;
+ u8 control;
+
+ spin_lock_irqsave(&priv->lock, flags);
+ if (set & TIOCM_RTS)
+ priv->line_control |= CH341_BIT_RTS;
+ if (set & TIOCM_DTR)
+ priv->line_control |= CH341_BIT_DTR;
+ if (clear & TIOCM_RTS)
+ priv->line_control &= ~CH341_BIT_RTS;
+ if (clear & TIOCM_DTR)
+ priv->line_control &= ~CH341_BIT_DTR;
+ control = priv->line_control;
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ return ch341_set_handshake(port->serial->dev, control);
+}
+
+static void ch341_read_int_callback(struct urb *urb)
+{
+ struct usb_serial_port *port = (struct usb_serial_port *) urb->context;
+ unsigned char *data = urb->transfer_buffer;
+ unsigned int actual_length = urb->actual_length;
+ int status;
+
+ dbg("%s (%d)", __func__, port->number);
+
+ switch (urb->status) {
+ case 0:
+ /* success */
+ break;
+ case -ECONNRESET:
+ case -ENOENT:
+ case -ESHUTDOWN:
+ /* this urb is terminated, clean up */
+ dbg("%s - urb shutting down with status: %d", __func__,
+ urb->status);
+ return;
+ default:
+ dbg("%s - nonzero urb status received: %d", __func__,
+ urb->status);
+ goto exit;
+ }
- /* Copy back the old hardware settings */
- tty_termios_copy_hw(tty->termios, old_termios);
- /* And re-encode with the new baud */
- tty_encode_baud_rate(tty, baud_rate, baud_rate);
+ usb_serial_debug_data(debug, &port->dev, __func__,
+ urb->actual_length, urb->transfer_buffer);
+
+ if (actual_length >= 4) {
+ struct ch341_private *priv = usb_get_serial_port_data(port);
+ unsigned long flags;
+
+ spin_lock_irqsave(&priv->lock, flags);
+ priv->line_status = (~(data[2])) & CH341_BITS_MODEM_STAT;
+ if ((data[1] & CH341_MULT_STAT))
+ priv->multi_status_change = 1;
+ spin_unlock_irqrestore(&priv->lock, flags);
+ wake_up_interruptible(&priv->delta_msr_wait);
+ }
+
+exit:
+ status = usb_submit_urb(urb, GFP_ATOMIC);
+ if (status)
+ dev_err(&urb->dev->dev,
+ "%s - usb_submit_urb failed with result %d\n",
+ __func__, status);
+}
+
+static int wait_modem_info(struct usb_serial_port *port, unsigned int arg)
+{
+ struct ch341_private *priv = usb_get_serial_port_data(port);
+ unsigned long flags;
+ u8 prevstatus;
+ u8 status;
+ u8 changed;
+ u8 multi_change = 0;
+
+ spin_lock_irqsave(&priv->lock, flags);
+ prevstatus = priv->line_status;
+ priv->multi_status_change = 0;
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ while (!multi_change) {
+ interruptible_sleep_on(&priv->delta_msr_wait);
+ /* see if a signal did it */
+ if (signal_pending(current))
+ return -ERESTARTSYS;
+
+ spin_lock_irqsave(&priv->lock, flags);
+ status = priv->line_status;
+ multi_change = priv->multi_status_change;
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ changed = prevstatus ^ status;
+
+ if (((arg & TIOCM_RNG) && (changed & CH341_BIT_RI)) ||
+ ((arg & TIOCM_DSR) && (changed & CH341_BIT_DSR)) ||
+ ((arg & TIOCM_CD) && (changed & CH341_BIT_DCD)) ||
+ ((arg & TIOCM_CTS) && (changed & CH341_BIT_CTS))) {
+ return 0;
+ }
+ prevstatus = status;
+ }
+
+ return 0;
+}
+
+/*static int ch341_ioctl(struct usb_serial_port *port, struct file *file,*/
+static int ch341_ioctl(struct tty_struct *tty, struct file *file,
+ unsigned int cmd, unsigned long arg)
+{
+ struct usb_serial_port *port = tty->driver_data;
+ dbg("%s (%d) cmd = 0x%04x", __func__, port->number, cmd);
+
+ switch (cmd) {
+ case TIOCMIWAIT:
+ dbg("%s (%d) TIOCMIWAIT", __func__, port->number);
+ return wait_modem_info(port, arg);
+
+ default:
+ dbg("%s not supported = 0x%04x", __func__, cmd);
+ break;
+ }
+
+ return -ENOIOCTLCMD;
+}
+
+static int ch341_tiocmget(struct tty_struct *tty, struct file *file)
+{
+ struct usb_serial_port *port = tty->driver_data;
+ struct ch341_private *priv = usb_get_serial_port_data(port);
+ unsigned long flags;
+ u8 mcr;
+ u8 status;
+ unsigned int result;
+
+ dbg("%s (%d)", __func__, port->number);
+
+ spin_lock_irqsave(&priv->lock, flags);
+ mcr = priv->line_control;
+ status = priv->line_status;
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ result = ((mcr & CH341_BIT_DTR) ? TIOCM_DTR : 0)
+ | ((mcr & CH341_BIT_RTS) ? TIOCM_RTS : 0)
+ | ((status & CH341_BIT_CTS) ? TIOCM_CTS : 0)
+ | ((status & CH341_BIT_DSR) ? TIOCM_DSR : 0)
+ | ((status & CH341_BIT_RI) ? TIOCM_RI : 0)
+ | ((status & CH341_BIT_DCD) ? TIOCM_CD : 0);
+
+ dbg("%s - result = %x", __func__, result);
+
+ return result;
+}
+
+
+static int ch341_reset_resume(struct usb_interface *intf)
+{
+ struct usb_device *dev = interface_to_usbdev(intf);
+ struct usb_serial *serial = NULL;
+ struct ch341_private *priv;
+
+ serial = usb_get_intfdata(intf);
+ priv = usb_get_serial_port_data(serial->port[0]);
+
+ /*reconfigure ch341 serial port after bus-reset*/
+ ch341_configure(dev, priv);
+
+ usb_serial_resume(intf);
+
+ return 0;
}
static struct usb_driver ch341_driver = {
.name = "ch341",
.probe = usb_serial_probe,
.disconnect = usb_serial_disconnect,
+ .suspend = usb_serial_suspend,
+ .resume = usb_serial_resume,
+ .reset_resume = ch341_reset_resume,
.id_table = id_table,
.no_dynamic_id = 1,
+ .supports_autosuspend = 1,
};
static struct usb_serial_driver ch341_device = {
@@ -317,12 +564,17 @@ static struct usb_serial_driver ch341_device = {
.owner = THIS_MODULE,
.name = "ch341-uart",
},
- .id_table = id_table,
- .usb_driver = &ch341_driver,
- .num_ports = 1,
- .open = ch341_open,
- .set_termios = ch341_set_termios,
- .attach = ch341_attach,
+ .id_table = id_table,
+ .usb_driver = &ch341_driver,
+ .num_ports = 1,
+ .open = ch341_open,
+ .close = ch341_close,
+ .ioctl = ch341_ioctl,
+ .set_termios = ch341_set_termios,
+ .tiocmget = ch341_tiocmget,
+ .tiocmset = ch341_tiocmset,
+ .read_int_callback = ch341_read_int_callback,
+ .attach = ch341_attach,
};
static int __init ch341_init(void)
diff --git a/drivers/usb/serial/cp2101.c b/drivers/usb/serial/cp210x.c
index 9b4082b58c5b..e8d5133ce9c8 100644
--- a/drivers/usb/serial/cp2101.c
+++ b/drivers/usb/serial/cp210x.c
@@ -11,10 +11,6 @@
* thanks to Karl Hiramoto karl@hiramoto.org. RTSCTS hardware flow
* control thanks to Munir Nassar nassarmu@real-time.com
*
- * Outstanding Issues:
- * Buffers are not flushed when the port is opened.
- * Multiple calls to write() may fail with "Resource temporarily unavailable"
- *
*/
#include <linux/kernel.h>
@@ -31,7 +27,7 @@
/*
* Version Information
*/
-#define DRIVER_VERSION "v0.07"
+#define DRIVER_VERSION "v0.08"
#define DRIVER_DESC "Silicon Labs CP2101/CP2102 RS232 serial adaptor driver"
/*
@@ -42,17 +38,21 @@ static int cp2101_open(struct tty_struct *, struct usb_serial_port *,
static void cp2101_cleanup(struct usb_serial_port *);
static void cp2101_close(struct tty_struct *, struct usb_serial_port *,
struct file*);
-static void cp2101_get_termios(struct tty_struct *);
+static void cp2101_get_termios(struct tty_struct *,
+ struct usb_serial_port *port);
+static void cp2101_get_termios_port(struct usb_serial_port *port,
+ unsigned int *cflagp, unsigned int *baudp);
static void cp2101_set_termios(struct tty_struct *, struct usb_serial_port *,
struct ktermios*);
static int cp2101_tiocmget(struct tty_struct *, struct file *);
static int cp2101_tiocmset(struct tty_struct *, struct file *,
unsigned int, unsigned int);
+static int cp2101_tiocmset_port(struct usb_serial_port *port, struct file *,
+ unsigned int, unsigned int);
static void cp2101_break_ctl(struct tty_struct *, int);
static int cp2101_startup(struct usb_serial *);
static void cp2101_shutdown(struct usb_serial *);
-
static int debug;
static struct usb_device_id id_table [] = {
@@ -91,6 +91,7 @@ static struct usb_device_id id_table [] = {
{ USB_DEVICE(0x10c4, 0x8293) }, /* Telegesys ETRX2USB */
{ USB_DEVICE(0x10C4, 0x8341) }, /* Siemens MC35PU GPRS Modem */
{ USB_DEVICE(0x10C4, 0x83A8) }, /* Amber Wireless AMB2560 */
+ { USB_DEVICE(0x10C4, 0x846E) }, /* BEI USB Sensor Interface (VCP) */
{ USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */
{ USB_DEVICE(0x10C4, 0xEA61) }, /* Silicon Labs factory default */
{ USB_DEVICE(0x10C4, 0xF001) }, /* Elan Digital Systems USBscope50 */
@@ -225,7 +226,7 @@ static int cp2101_get_config(struct usb_serial_port *port, u8 request,
kfree(buf);
if (result != size) {
- dev_err(&port->dev, "%s - Unable to send config request, "
+ dbg("%s - Unable to send config request, "
"request=0x%x size=%d result=%d\n",
__func__, request, size, result);
return -EPROTO;
@@ -276,7 +277,7 @@ static int cp2101_set_config(struct usb_serial_port *port, u8 request,
kfree(buf);
if ((size > 2 && result != size) || result < 0) {
- dev_err(&port->dev, "%s - Unable to send request, "
+ dbg("%s - Unable to send request, "
"request=0x%x size=%d result=%d\n",
__func__, request, size, result);
return -EPROTO;
@@ -301,6 +302,47 @@ static inline int cp2101_set_config_single(struct usb_serial_port *port,
return cp2101_set_config(port, request, &data, 2);
}
+/*
+ * cp2101_quantise_baudrate
+ * Quantises the baud rate as per AN205 Table 1
+ */
+static unsigned int cp2101_quantise_baudrate(unsigned int baud) {
+ if (baud <= 56) baud = 0;
+ else if (baud <= 300) baud = 300;
+ else if (baud <= 600) baud = 600;
+ else if (baud <= 1200) baud = 1200;
+ else if (baud <= 1800) baud = 1800;
+ else if (baud <= 2400) baud = 2400;
+ else if (baud <= 4000) baud = 4000;
+ else if (baud <= 4803) baud = 4800;
+ else if (baud <= 7207) baud = 7200;
+ else if (baud <= 9612) baud = 9600;
+ else if (baud <= 14428) baud = 14400;
+ else if (baud <= 16062) baud = 16000;
+ else if (baud <= 19250) baud = 19200;
+ else if (baud <= 28912) baud = 28800;
+ else if (baud <= 38601) baud = 38400;
+ else if (baud <= 51558) baud = 51200;
+ else if (baud <= 56280) baud = 56000;
+ else if (baud <= 58053) baud = 57600;
+ else if (baud <= 64111) baud = 64000;
+ else if (baud <= 77608) baud = 76800;
+ else if (baud <= 117028) baud = 115200;
+ else if (baud <= 129347) baud = 128000;
+ else if (baud <= 156868) baud = 153600;
+ else if (baud <= 237832) baud = 230400;
+ else if (baud <= 254234) baud = 250000;
+ else if (baud <= 273066) baud = 256000;
+ else if (baud <= 491520) baud = 460800;
+ else if (baud <= 567138) baud = 500000;
+ else if (baud <= 670254) baud = 576000;
+ else if (baud <= 1053257) baud = 921600;
+ else if (baud <= 1474560) baud = 1228800;
+ else if (baud <= 2457600) baud = 1843200;
+ else baud = 3686400;
+ return baud;
+}
+
static int cp2101_open(struct tty_struct *tty, struct usb_serial_port *port,
struct file *filp)
{
@@ -331,10 +373,12 @@ static int cp2101_open(struct tty_struct *tty, struct usb_serial_port *port,
}
/* Configure the termios structure */
- cp2101_get_termios(tty);
+ cp2101_get_termios(tty, port);
/* Set the DTR and RTS pins low */
- cp2101_tiocmset(tty, NULL, TIOCM_DTR | TIOCM_RTS, 0);
+ cp2101_tiocmset_port(tty ? (struct usb_serial_port *) tty->driver_data
+ : port,
+ NULL, TIOCM_DTR | TIOCM_RTS, 0);
return 0;
}
@@ -376,9 +420,31 @@ static void cp2101_close(struct tty_struct *tty, struct usb_serial_port *port,
* from the device, corrects any unsupported values, and configures the
* termios structure to reflect the state of the device
*/
-static void cp2101_get_termios (struct tty_struct *tty)
+static void cp2101_get_termios(struct tty_struct *tty,
+ struct usb_serial_port *port)
+{
+ unsigned int baud;
+
+ if (tty) {
+ cp2101_get_termios_port(tty->driver_data,
+ &tty->termios->c_cflag, &baud);
+ tty_encode_baud_rate(tty, baud, baud);
+ }
+
+ else {
+ unsigned int cflag;
+ cflag = 0;
+ cp2101_get_termios_port(port, &cflag, &baud);
+ }
+}
+
+/*
+ * cp2101_get_termios_port
+ * This is the heart of cp2101_get_termios which always uses a &usb_serial_port.
+ */
+static void cp2101_get_termios_port(struct usb_serial_port *port,
+ unsigned int *cflagp, unsigned int *baudp)
{
- struct usb_serial_port *port = tty->driver_data;
unsigned int cflag, modem_ctl[4];
unsigned int baud;
unsigned int bits;
@@ -388,12 +454,12 @@ static void cp2101_get_termios (struct tty_struct *tty)
cp2101_get_config(port, CP2101_BAUDRATE, &baud, 2);
/* Convert to baudrate */
if (baud)
- baud = BAUD_RATE_GEN_FREQ / baud;
+ baud = cp2101_quantise_baudrate((BAUD_RATE_GEN_FREQ + baud/2)/ baud);
dbg("%s - baud rate = %d", __func__, baud);
+ *baudp = baud;
- tty_encode_baud_rate(tty, baud, baud);
- cflag = tty->termios->c_cflag;
+ cflag = *cflagp;
cp2101_get_config(port, CP2101_BITS, &bits, 2);
cflag &= ~CSIZE;
@@ -499,7 +565,7 @@ static void cp2101_get_termios (struct tty_struct *tty)
cflag &= ~CRTSCTS;
}
- tty->termios->c_cflag = cflag;
+ *cflagp = cflag;
}
static void cp2101_set_termios(struct tty_struct *tty,
@@ -517,46 +583,16 @@ static void cp2101_set_termios(struct tty_struct *tty,
tty->termios->c_cflag &= ~CMSPAR;
cflag = tty->termios->c_cflag;
old_cflag = old_termios->c_cflag;
- baud = tty_get_baud_rate(tty);
+ baud = cp2101_quantise_baudrate(tty_get_baud_rate(tty));
/* If the baud rate is to be updated*/
- if (baud != tty_termios_baud_rate(old_termios)) {
- switch (baud) {
- case 0:
- case 600:
- case 1200:
- case 1800:
- case 2400:
- case 4800:
- case 7200:
- case 9600:
- case 14400:
- case 19200:
- case 28800:
- case 38400:
- case 55854:
- case 57600:
- case 115200:
- case 127117:
- case 230400:
- case 460800:
- case 921600:
- case 3686400:
- break;
- default:
- baud = 9600;
- break;
- }
-
- if (baud) {
- dbg("%s - Setting baud rate to %d baud", __func__,
- baud);
- if (cp2101_set_config_single(port, CP2101_BAUDRATE,
- (BAUD_RATE_GEN_FREQ / baud))) {
- dev_err(&port->dev, "Baud rate requested not "
- "supported by device\n");
- baud = tty_termios_baud_rate(old_termios);
- }
+ if (baud != tty_termios_baud_rate(old_termios) && baud != 0) {
+ dbg("%s - Setting baud rate to %d baud", __func__,
+ baud);
+ if (cp2101_set_config_single(port, CP2101_BAUDRATE,
+ ((BAUD_RATE_GEN_FREQ + baud/2) / baud))) {
+ dbg("Baud rate requested not supported by device\n");
+ baud = tty_termios_baud_rate(old_termios);
}
}
/* Report back the resulting baud rate */
@@ -588,14 +624,14 @@ static void cp2101_set_termios(struct tty_struct *tty,
dbg("%s - data bits = 9", __func__);
break;*/
default:
- dev_err(&port->dev, "cp2101 driver does not "
+ dbg("cp2101 driver does not "
"support the number of bits requested,"
" using 8 bit mode\n");
bits |= BITS_DATA_8;
break;
}
if (cp2101_set_config(port, CP2101_BITS, &bits, 2))
- dev_err(&port->dev, "Number of data bits requested "
+ dbg("Number of data bits requested "
"not supported by device\n");
}
@@ -612,7 +648,7 @@ static void cp2101_set_termios(struct tty_struct *tty,
}
}
if (cp2101_set_config(port, CP2101_BITS, &bits, 2))
- dev_err(&port->dev, "Parity mode not supported "
+ dbg("Parity mode not supported "
"by device\n");
}
@@ -627,7 +663,7 @@ static void cp2101_set_termios(struct tty_struct *tty,
dbg("%s - stop bits = 1", __func__);
}
if (cp2101_set_config(port, CP2101_BITS, &bits, 2))
- dev_err(&port->dev, "Number of stop bits requested "
+ dbg("Number of stop bits requested "
"not supported by device\n");
}
@@ -661,6 +697,12 @@ static int cp2101_tiocmset (struct tty_struct *tty, struct file *file,
unsigned int set, unsigned int clear)
{
struct usb_serial_port *port = tty->driver_data;
+ return cp2101_tiocmset_port(port, file, set, clear);
+}
+
+static int cp2101_tiocmset_port(struct usb_serial_port *port, struct file *file,
+ unsigned int set, unsigned int clear)
+{
unsigned int control = 0;
dbg("%s - port %d", __func__, port->number);
@@ -685,7 +727,6 @@ static int cp2101_tiocmset (struct tty_struct *tty, struct file *file,
dbg("%s - control = 0x%.4x", __func__, control);
return cp2101_set_config(port, CP2101_CONTROL, &control, 2);
-
}
static int cp2101_tiocmget (struct tty_struct *tty, struct file *file)
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index ae84c326a540..dcc87aaa8628 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -1938,18 +1938,16 @@ static void ftdi_process_read(struct work_struct *work)
/* Compare new line status to the old one, signal if different/
N.B. packet may be processed more than once, but differences
are only processed once. */
- if (priv != NULL) {
- char new_status = data[packet_offset + 0] &
- FTDI_STATUS_B0_MASK;
- if (new_status != priv->prev_status) {
- priv->diff_status |=
- new_status ^ priv->prev_status;
- wake_up_interruptible(&priv->delta_msr_wait);
- priv->prev_status = new_status;
- }
+ char new_status = data[packet_offset + 0] &
+ FTDI_STATUS_B0_MASK;
+ if (new_status != priv->prev_status) {
+ priv->diff_status |=
+ new_status ^ priv->prev_status;
+ wake_up_interruptible(&priv->delta_msr_wait);
+ priv->prev_status = new_status;
}
- length = min(PKTSZ, urb->actual_length-packet_offset)-2;
+ length = min_t(u32, PKTSZ, urb->actual_length-packet_offset)-2;
if (length < 0) {
dev_err(&port->dev, "%s - bad packet length: %d\n",
__func__, length+2);
@@ -2294,11 +2292,8 @@ static int ftdi_tiocmget(struct tty_struct *tty, struct file *file)
FTDI_SIO_GET_MODEM_STATUS_REQUEST_TYPE,
0, 0,
buf, 1, WDR_TIMEOUT);
- if (ret < 0) {
- dbg("%s Could not get modem status of device - err: %d", __func__,
- ret);
+ if (ret < 0)
return ret;
- }
break;
case FT8U232AM:
case FT232BM:
@@ -2313,15 +2308,11 @@ static int ftdi_tiocmget(struct tty_struct *tty, struct file *file)
FTDI_SIO_GET_MODEM_STATUS_REQUEST_TYPE,
0, priv->interface,
buf, 2, WDR_TIMEOUT);
- if (ret < 0) {
- dbg("%s Could not get modem status of device - err: %d", __func__,
- ret);
+ if (ret < 0)
return ret;
- }
break;
default:
return -EFAULT;
- break;
}
return (buf[0] & FTDI_SIO_DSR_MASK ? TIOCM_DSR : 0) |
diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c
index 814909f1ee63..9d57cace3731 100644
--- a/drivers/usb/serial/generic.c
+++ b/drivers/usb/serial/generic.c
@@ -177,14 +177,6 @@ int usb_serial_generic_resume(struct usb_serial *serial)
struct usb_serial_port *port;
int i, c = 0, r;
-#ifdef CONFIG_PM
- /*
- * If this is an autoresume, don't submit URBs.
- * They will be submitted in the open function instead.
- */
- if (serial->dev->auto_pm)
- return 0;
-#endif
for (i = 0; i < serial->num_ports; i++) {
port = serial->port[i];
if (port->port.count && port->read_urb) {
@@ -196,6 +188,7 @@ int usb_serial_generic_resume(struct usb_serial *serial)
return c ? -EIO : 0;
}
+EXPORT_SYMBOL_GPL(usb_serial_generic_resume);
void usb_serial_generic_close(struct tty_struct *tty,
struct usb_serial_port *port, struct file *filp)
diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c
index 132be74d2b89..ef92095b0732 100644
--- a/drivers/usb/serial/ipaq.c
+++ b/drivers/usb/serial/ipaq.c
@@ -78,6 +78,7 @@ static int ipaq_open(struct tty_struct *tty,
struct usb_serial_port *port, struct file *filp);
static void ipaq_close(struct tty_struct *tty,
struct usb_serial_port *port, struct file *filp);
+static int ipaq_calc_num_ports(struct usb_serial *serial);
static int ipaq_startup(struct usb_serial *serial);
static void ipaq_shutdown(struct usb_serial *serial);
static int ipaq_write(struct tty_struct *tty, struct usb_serial_port *port,
@@ -572,15 +573,10 @@ static struct usb_serial_driver ipaq_device = {
.description = "PocketPC PDA",
.usb_driver = &ipaq_driver,
.id_table = ipaq_id_table,
- /*
- * some devices have an extra endpoint, which
- * must be ignored as it would make the core
- * create a second port which oopses when used
- */
- .num_ports = 1,
.open = ipaq_open,
.close = ipaq_close,
.attach = ipaq_startup,
+ .calc_num_ports = ipaq_calc_num_ports,
.shutdown = ipaq_shutdown,
.write = ipaq_write,
.write_room = ipaq_write_room,
@@ -956,14 +952,49 @@ static void ipaq_destroy_lists(struct usb_serial_port *port)
}
+static int ipaq_calc_num_ports(struct usb_serial *serial)
+{
+ /*
+ * some devices have 3 endpoints, the 3rd of which
+ * must be ignored as it would make the core
+ * create a second port which oopses when used
+ */
+ int ipaq_num_ports = 1;
+
+ dbg("%s - numberofendpoints: %d", __FUNCTION__,
+ (int)serial->interface->cur_altsetting->desc.bNumEndpoints);
+
+ /*
+ * a few devices have 4 endpoints, seemingly Yakuma devices,
+ * and we need the second pair, so let them have 2 ports
+ *
+ * TODO: can we drop port 1 ?
+ */
+ if (serial->interface->cur_altsetting->desc.bNumEndpoints > 3) {
+ ipaq_num_ports = 2;
+ }
+
+ return ipaq_num_ports;
+}
+
+
static int ipaq_startup(struct usb_serial *serial)
{
dbg("%s", __func__);
if (serial->dev->actconfig->desc.bConfigurationValue != 1) {
+ /*
+ * FIXME: HP iPaq rx3715, possibly others, have 1 config that
+ * is labeled as 2
+ */
+
dev_err(&serial->dev->dev, "active config #%d != 1 ??\n",
serial->dev->actconfig->desc.bConfigurationValue);
return -ENODEV;
}
+
+ dbg("%s - iPAQ module configured for %d ports",
+ __FUNCTION__, serial->num_ports);
+
return usb_reset_configuration(serial->dev);
}
diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c
index 9878c0fb3859..00daa8f7759a 100644
--- a/drivers/usb/serial/keyspan.c
+++ b/drivers/usb/serial/keyspan.c
@@ -1507,7 +1507,7 @@ static struct urb *keyspan_setup_urb(struct usb_serial *serial, int endpoint,
} else {
dev_warn(&serial->interface->dev,
"unsupported endpoint type %x\n",
- ep_desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK);
+ usb_endpoint_type(ep_desc));
usb_free_urb(urb);
return NULL;
}
diff --git a/drivers/usb/serial/opticon.c b/drivers/usb/serial/opticon.c
index cea326f1f105..839583dc8b6a 100644
--- a/drivers/usb/serial/opticon.c
+++ b/drivers/usb/serial/opticon.c
@@ -1,8 +1,8 @@
/*
* Opticon USB barcode to serial driver
*
- * Copyright (C) 2008 Greg Kroah-Hartman <gregkh@suse.de>
- * Copyright (C) 2008 Novell Inc.
+ * Copyright (C) 2008 - 2009 Greg Kroah-Hartman <gregkh@suse.de>
+ * Copyright (C) 2008 - 2009 Novell Inc.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License version
@@ -14,6 +14,7 @@
#include <linux/tty.h>
#include <linux/tty_driver.h>
#include <linux/tty_flip.h>
+#include <linux/serial.h>
#include <linux/module.h>
#include <linux/usb.h>
#include <linux/usb/serial.h>
@@ -40,8 +41,12 @@ struct opticon_private {
bool throttled;
bool actually_throttled;
bool rts;
+ int outstanding_urbs;
};
+/* max number of write urbs in flight */
+#define URB_UPPER_LIMIT 4
+
static void opticon_bulk_callback(struct urb *urb)
{
struct opticon_private *priv = urb->context;
@@ -106,7 +111,6 @@ static void opticon_bulk_callback(struct urb *urb)
priv->rts = false;
else
priv->rts = true;
- /* FIXME change the RTS level */
} else {
dev_dbg(&priv->udev->dev,
"Unknown data packet received from the device:"
@@ -188,6 +192,120 @@ static void opticon_close(struct tty_struct *tty, struct usb_serial_port *port,
usb_kill_urb(priv->bulk_read_urb);
}
+static void opticon_write_bulk_callback(struct urb *urb)
+{
+ struct opticon_private *priv = urb->context;
+ int status = urb->status;
+ unsigned long flags;
+
+ /* free up the transfer buffer, as usb_free_urb() does not do this */
+ kfree(urb->transfer_buffer);
+
+ if (status)
+ dbg("%s - nonzero write bulk status received: %d",
+ __func__, status);
+
+ spin_lock_irqsave(&priv->lock, flags);
+ --priv->outstanding_urbs;
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ usb_serial_port_softint(priv->port);
+}
+
+static int opticon_write(struct tty_struct *tty, struct usb_serial_port *port,
+ const unsigned char *buf, int count)
+{
+ struct opticon_private *priv = usb_get_serial_data(port->serial);
+ struct usb_serial *serial = port->serial;
+ struct urb *urb;
+ unsigned char *buffer;
+ unsigned long flags;
+ int status;
+
+ dbg("%s - port %d", __func__, port->number);
+
+ spin_lock_irqsave(&priv->lock, flags);
+ if (priv->outstanding_urbs > URB_UPPER_LIMIT) {
+ spin_unlock_irqrestore(&priv->lock, flags);
+ dbg("%s - write limit hit\n", __func__);
+ return 0;
+ }
+ priv->outstanding_urbs++;
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ buffer = kmalloc(count, GFP_ATOMIC);
+ if (!buffer) {
+ dev_err(&port->dev, "out of memory\n");
+ count = -ENOMEM;
+ goto error_no_buffer;
+ }
+
+ urb = usb_alloc_urb(0, GFP_ATOMIC);
+ if (!urb) {
+ dev_err(&port->dev, "no more free urbs\n");
+ count = -ENOMEM;
+ goto error_no_urb;
+ }
+
+ memcpy(buffer, buf, count);
+
+ usb_serial_debug_data(debug, &port->dev, __func__, count, buffer);
+
+ usb_fill_bulk_urb(urb, serial->dev,
+ usb_sndbulkpipe(serial->dev,
+ port->bulk_out_endpointAddress),
+ buffer, count, opticon_write_bulk_callback, priv);
+
+ /* send it down the pipe */
+ status = usb_submit_urb(urb, GFP_ATOMIC);
+ if (status) {
+ dev_err(&port->dev,
+ "%s - usb_submit_urb(write bulk) failed with status = %d\n",
+ __func__, status);
+ count = status;
+ goto error;
+ }
+
+ /* we are done with this urb, so let the host driver
+ * really free it when it is finished with it */
+ usb_free_urb(urb);
+
+ return count;
+error:
+ usb_free_urb(urb);
+error_no_urb:
+ kfree(buffer);
+error_no_buffer:
+ spin_lock_irqsave(&priv->lock, flags);
+ --priv->outstanding_urbs;
+ spin_unlock_irqrestore(&priv->lock, flags);
+ return count;
+}
+
+static int opticon_write_room(struct tty_struct *tty)
+{
+ struct usb_serial_port *port = tty->driver_data;
+ struct opticon_private *priv = usb_get_serial_data(port->serial);
+ unsigned long flags;
+
+ dbg("%s - port %d", __func__, port->number);
+
+ /*
+ * We really can take almost anything the user throws at us
+ * but let's pick a nice big number to tell the tty
+ * layer that we have lots of free space, unless we don't.
+ */
+ spin_lock_irqsave(&priv->lock, flags);
+ if (priv->outstanding_urbs > URB_UPPER_LIMIT * 2 / 3) {
+ spin_unlock_irqrestore(&priv->lock, flags);
+ dbg("%s - write limit hit\n", __func__);
+ return 0;
+ }
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ return 2048;
+}
+
static void opticon_throttle(struct tty_struct *tty)
{
struct usb_serial_port *port = tty->driver_data;
@@ -223,6 +341,67 @@ static void opticon_unthrottle(struct tty_struct *tty)
__func__, result);
}
+static int opticon_tiocmget(struct tty_struct *tty, struct file *file)
+{
+ struct usb_serial_port *port = tty->driver_data;
+ struct opticon_private *priv = usb_get_serial_data(port->serial);
+ unsigned long flags;
+ int result = 0;
+
+ dbg("%s - port %d", __func__, port->number);
+
+ spin_lock_irqsave(&priv->lock, flags);
+ if (priv->rts)
+ result = TIOCM_RTS;
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ dbg("%s - %x", __func__, result);
+ return result;
+}
+
+static int get_serial_info(struct opticon_private *priv,
+ struct serial_struct __user *serial)
+{
+ struct serial_struct tmp;
+
+ if (!serial)
+ return -EFAULT;
+
+ memset(&tmp, 0x00, sizeof(tmp));
+
+ /* fake emulate a 16550 uart to make userspace code happy */
+ tmp.type = PORT_16550A;
+ tmp.line = priv->serial->minor;
+ tmp.port = 0;
+ tmp.irq = 0;
+ tmp.flags = ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ;
+ tmp.xmit_fifo_size = 1024;
+ tmp.baud_base = 9600;
+ tmp.close_delay = 5*HZ;
+ tmp.closing_wait = 30*HZ;
+
+ if (copy_to_user(serial, &tmp, sizeof(*serial)))
+ return -EFAULT;
+ return 0;
+}
+
+static int opticon_ioctl(struct tty_struct *tty, struct file *file,
+ unsigned int cmd, unsigned long arg)
+{
+ struct usb_serial_port *port = tty->driver_data;
+ struct opticon_private *priv = usb_get_serial_data(port->serial);
+
+ dbg("%s - port %d, cmd = 0x%x", __func__, port->number, cmd);
+
+ switch (cmd) {
+ case TIOCGSERIAL:
+ return get_serial_info(priv,
+ (struct serial_struct __user *)arg);
+ }
+
+ return -ENOIOCTLCMD;
+}
+
static int opticon_startup(struct usb_serial *serial)
{
struct opticon_private *priv;
@@ -306,11 +485,37 @@ static void opticon_shutdown(struct usb_serial *serial)
usb_set_serial_data(serial, NULL);
}
+static int opticon_suspend(struct usb_interface *intf, pm_message_t message)
+{
+ struct usb_serial *serial = usb_get_intfdata(intf);
+ struct opticon_private *priv = usb_get_serial_data(serial);
+
+ usb_kill_urb(priv->bulk_read_urb);
+ return 0;
+}
+
+static int opticon_resume(struct usb_interface *intf)
+{
+ struct usb_serial *serial = usb_get_intfdata(intf);
+ struct opticon_private *priv = usb_get_serial_data(serial);
+ struct usb_serial_port *port = serial->port[0];
+ int result;
+
+ mutex_lock(&port->mutex);
+ if (port->port.count)
+ result = usb_submit_urb(priv->bulk_read_urb, GFP_NOIO);
+ else
+ result = 0;
+ mutex_unlock(&port->mutex);
+ return result;
+}
static struct usb_driver opticon_driver = {
.name = "opticon",
.probe = usb_serial_probe,
.disconnect = usb_serial_disconnect,
+ .suspend = opticon_suspend,
+ .resume = opticon_resume,
.id_table = id_table,
.no_dynamic_id = 1,
};
@@ -326,9 +531,13 @@ static struct usb_serial_driver opticon_device = {
.attach = opticon_startup,
.open = opticon_open,
.close = opticon_close,
+ .write = opticon_write,
+ .write_room = opticon_write_room,
.shutdown = opticon_shutdown,
.throttle = opticon_throttle,
.unthrottle = opticon_unthrottle,
+ .ioctl = opticon_ioctl,
+ .tiocmget = opticon_tiocmget,
};
static int __init opticon_init(void)
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 61ebddc48497..d560c0b54e6e 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -62,6 +62,8 @@ static int option_tiocmget(struct tty_struct *tty, struct file *file);
static int option_tiocmset(struct tty_struct *tty, struct file *file,
unsigned int set, unsigned int clear);
static int option_send_setup(struct tty_struct *tty, struct usb_serial_port *port);
+static int option_suspend(struct usb_serial *serial, pm_message_t message);
+static int option_resume(struct usb_serial *serial);
/* Vendor and product IDs */
#define OPTION_VENDOR_ID 0x0AF0
@@ -523,6 +525,8 @@ static struct usb_driver option_driver = {
.name = "option",
.probe = usb_serial_probe,
.disconnect = usb_serial_disconnect,
+ .suspend = usb_serial_suspend,
+ .resume = usb_serial_resume,
.id_table = option_ids,
.no_dynamic_id = 1,
};
@@ -551,6 +555,8 @@ static struct usb_serial_driver option_1port_device = {
.attach = option_startup,
.shutdown = option_shutdown,
.read_int_callback = option_instat_callback,
+ .suspend = option_suspend,
+ .resume = option_resume,
};
static int debug;
@@ -821,10 +827,10 @@ static void option_instat_callback(struct urb *urb)
req_pkt->bRequestType, req_pkt->bRequest);
}
} else
- dbg("%s: error %d", __func__, status);
+ err("%s: error %d", __func__, status);
/* Resubmit urb so we continue receiving IRQ data */
- if (status != -ESHUTDOWN) {
+ if (status != -ESHUTDOWN && status != -ENOENT) {
urb->dev = serial->dev;
err = usb_submit_urb(urb, GFP_ATOMIC);
if (err)
@@ -843,7 +849,6 @@ static int option_write_room(struct tty_struct *tty)
portdata = usb_get_serial_port_data(port);
-
for (i = 0; i < N_OUT_URB; i++) {
this_urb = portdata->out_urbs[i];
if (this_urb && !test_bit(i, &portdata->out_busy))
@@ -1105,14 +1110,12 @@ bail_out_error:
return 1;
}
-static void option_shutdown(struct usb_serial *serial)
+static void stop_read_write_urbs(struct usb_serial *serial)
{
int i, j;
struct usb_serial_port *port;
struct option_port_private *portdata;
- dbg("%s", __func__);
-
/* Stop reading/writing urbs */
for (i = 0; i < serial->num_ports; ++i) {
port = serial->port[i];
@@ -1122,6 +1125,17 @@ static void option_shutdown(struct usb_serial *serial)
for (j = 0; j < N_OUT_URB; j++)
usb_kill_urb(portdata->out_urbs[j]);
}
+}
+
+static void option_shutdown(struct usb_serial *serial)
+{
+ int i, j;
+ struct usb_serial_port *port;
+ struct option_port_private *portdata;
+
+ dbg("%s", __func__);
+
+ stop_read_write_urbs(serial);
/* Now free them */
for (i = 0; i < serial->num_ports; ++i) {
@@ -1152,6 +1166,66 @@ static void option_shutdown(struct usb_serial *serial)
}
}
+static int option_suspend(struct usb_serial *serial, pm_message_t message)
+{
+ dbg("%s entered", __func__);
+ stop_read_write_urbs(serial);
+
+ return 0;
+}
+
+static int option_resume(struct usb_serial *serial)
+{
+ int err, i, j;
+ struct usb_serial_port *port;
+ struct urb *urb;
+ struct option_port_private *portdata;
+
+ dbg("%s entered", __func__);
+ /* get the interrupt URBs resubmitted unconditionally */
+ for (i = 0; i < serial->num_ports; i++) {
+ port = serial->port[i];
+ if (!port->interrupt_in_urb) {
+ dbg("%s: No interrupt URB for port %d\n", __func__, i);
+ continue;
+ }
+ port->interrupt_in_urb->dev = serial->dev;
+ err = usb_submit_urb(port->interrupt_in_urb, GFP_NOIO);
+ dbg("Submitted interrupt URB for port %d (result %d)", i, err);
+ if (err < 0) {
+ err("%s: Error %d for interrupt URB of port%d",
+ __func__, err, i);
+ return err;
+ }
+ }
+
+ for (i = 0; i < serial->num_ports; i++) {
+ /* walk all ports */
+ port = serial->port[i];
+ portdata = usb_get_serial_port_data(port);
+ mutex_lock(&port->mutex);
+
+ /* skip closed ports */
+ if (!port->port.count) {
+ mutex_unlock(&port->mutex);
+ continue;
+ }
+
+ for (j = 0; j < N_IN_URB; j++) {
+ urb = portdata->in_urbs[j];
+ err = usb_submit_urb(urb, GFP_NOIO);
+ if (err < 0) {
+ mutex_unlock(&port->mutex);
+ err("%s: Error %d for bulk URB %d",
+ __func__, err, i);
+ return err;
+ }
+ }
+ mutex_unlock(&port->mutex);
+ }
+ return 0;
+}
+
MODULE_AUTHOR(DRIVER_AUTHOR);
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_VERSION(DRIVER_VERSION);
diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c
new file mode 100644
index 000000000000..e6d6b0c17fd9
--- /dev/null
+++ b/drivers/usb/serial/qcserial.c
@@ -0,0 +1,147 @@
+/*
+ * Qualcomm Serial USB driver
+ *
+ * Copyright (c) 2008 QUALCOMM Incorporated.
+ * Copyright (c) 2009 Greg Kroah-Hartman <gregkh@suse.de>
+ * Copyright (c) 2009 Novell Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/usb.h>
+#include <linux/usb/serial.h>
+
+#define DRIVER_AUTHOR "Qualcomm Inc"
+#define DRIVER_DESC "Qualcomm USB Serial driver"
+
+static int debug;
+
+static struct usb_device_id id_table[] = {
+ {USB_DEVICE(0x05c6, 0x9211)}, /* Acer Gobi QDL device */
+ {USB_DEVICE(0x05c6, 0x9212)}, /* Acer Gobi Modem Device */
+ {USB_DEVICE(0x03f0, 0x1f1d)}, /* HP un2400 Gobi Modem Device */
+ {USB_DEVICE(0x03f0, 0x201d)}, /* HP un2400 Gobi QDL Device */
+ { } /* Terminating entry */
+};
+MODULE_DEVICE_TABLE(usb, id_table);
+
+static struct usb_driver qcdriver = {
+ .name = "qcserial",
+ .probe = usb_serial_probe,
+ .disconnect = usb_serial_disconnect,
+ .id_table = id_table,
+ .suspend = usb_serial_suspend,
+ .resume = usb_serial_resume,
+ .supports_autosuspend = true,
+};
+
+static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id)
+{
+ int retval = -ENODEV;
+ __u8 nintf;
+ __u8 ifnum;
+
+ dbg("%s", __func__);
+
+ nintf = serial->dev->actconfig->desc.bNumInterfaces;
+ dbg("Num Interfaces = %d", nintf);
+ ifnum = serial->interface->cur_altsetting->desc.bInterfaceNumber;
+ dbg("This Interface = %d", ifnum);
+
+ switch (nintf) {
+ case 1:
+ /* QDL mode */
+ if (serial->interface->num_altsetting == 2) {
+ struct usb_host_interface *intf;
+
+ intf = &serial->interface->altsetting[1];
+ if (intf->desc.bNumEndpoints == 2) {
+ if (usb_endpoint_is_bulk_in(&intf->endpoint[0].desc) &&
+ usb_endpoint_is_bulk_out(&intf->endpoint[1].desc)) {
+ dbg("QDL port found");
+ retval = usb_set_interface(serial->dev, ifnum, 1);
+ if (retval < 0) {
+ dev_err(&serial->dev->dev,
+ "Could not set interface, error %d\n",
+ retval);
+ retval = -ENODEV;
+ }
+ return retval;
+ }
+ }
+ }
+ break;
+
+ case 4:
+ /* Composite mode */
+ if (ifnum == 2) {
+ dbg("Modem port found");
+ retval = usb_set_interface(serial->dev, ifnum, 0);
+ if (retval < 0) {
+ dev_err(&serial->dev->dev,
+ "Could not set interface, error %d\n",
+ retval);
+ retval = -ENODEV;
+ }
+ return retval;
+ }
+ break;
+
+ default:
+ dev_err(&serial->dev->dev,
+ "unknown number of interfaces: %d\n", nintf);
+ return -ENODEV;
+ }
+
+ return retval;
+}
+
+static struct usb_serial_driver qcdevice = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "qcserial",
+ },
+ .description = "Qualcomm USB modem",
+ .id_table = id_table,
+ .usb_driver = &qcdriver,
+ .num_ports = 1,
+ .probe = qcprobe,
+};
+
+static int __init qcinit(void)
+{
+ int retval;
+
+ retval = usb_serial_register(&qcdevice);
+ if (retval)
+ return retval;
+
+ retval = usb_register(&qcdriver);
+ if (retval) {
+ usb_serial_deregister(&qcdevice);
+ return retval;
+ }
+
+ return 0;
+}
+
+static void __exit qcexit(void)
+{
+ usb_deregister(&qcdriver);
+ usb_serial_deregister(&qcdevice);
+}
+
+module_init(qcinit);
+module_exit(qcexit);
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL v2");
+
+module_param(debug, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Debug enabled or not");
diff --git a/drivers/usb/serial/symbolserial.c b/drivers/usb/serial/symbolserial.c
new file mode 100644
index 000000000000..8b3cbc87adc7
--- /dev/null
+++ b/drivers/usb/serial/symbolserial.c
@@ -0,0 +1,399 @@
+/*
+ * Symbol USB barcode to serial driver
+ *
+ * Copyright (C) 2009 Greg Kroah-Hartman <gregkh@suse.de>
+ * Copyright (C) 2009 Novell Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/tty.h>
+#include <linux/tty_driver.h>
+#include <linux/tty_flip.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include <linux/usb/serial.h>
+#include <linux/uaccess.h>
+
+static int debug;
+
+static struct usb_device_id id_table[] = {
+ { USB_DEVICE(0x05e0, 0x0600) },
+ { },
+};
+MODULE_DEVICE_TABLE(usb, id_table);
+
+/* This structure holds all of the individual device information */
+struct symbol_private {
+ struct usb_device *udev;
+ struct usb_serial *serial;
+ struct usb_serial_port *port;
+ unsigned char *int_buffer;
+ struct urb *int_urb;
+ int buffer_size;
+ u8 bInterval;
+ u8 int_address;
+ spinlock_t lock; /* protects the following flags */
+ bool throttled;
+ bool actually_throttled;
+ bool rts;
+};
+
+static void symbol_int_callback(struct urb *urb)
+{
+ struct symbol_private *priv = urb->context;
+ unsigned char *data = urb->transfer_buffer;
+ struct usb_serial_port *port = priv->port;
+ int status = urb->status;
+ struct tty_struct *tty;
+ int result;
+ int available_room = 0;
+ int data_length;
+
+ dbg("%s - port %d", __func__, port->number);
+
+ switch (status) {
+ case 0:
+ /* success */
+ break;
+ case -ECONNRESET:
+ case -ENOENT:
+ case -ESHUTDOWN:
+ /* this urb is terminated, clean up */
+ dbg("%s - urb shutting down with status: %d",
+ __func__, status);
+ return;
+ default:
+ dbg("%s - nonzero urb status received: %d",
+ __func__, status);
+ goto exit;
+ }
+
+ usb_serial_debug_data(debug, &port->dev, __func__, urb->actual_length,
+ data);
+
+ if (urb->actual_length > 1) {
+ data_length = urb->actual_length - 1;
+
+ /*
+ * Data from the device comes with a 1 byte header:
+ *
+ * <size of data>data...
+ * This is real data to be sent to the tty layer
+ * we pretty much just ignore the size and send everything
+ * else to the tty layer.
+ */
+ tty = tty_port_tty_get(&port->port);
+ if (tty) {
+ available_room = tty_buffer_request_room(tty,
+ data_length);
+ if (available_room) {
+ tty_insert_flip_string(tty, &data[1],
+ available_room);
+ tty_flip_buffer_push(tty);
+ }
+ tty_kref_put(tty);
+ }
+ } else {
+ dev_dbg(&priv->udev->dev,
+ "Improper ammount of data received from the device, "
+ "%d bytes", urb->actual_length);
+ }
+
+exit:
+ spin_lock(&priv->lock);
+
+ /* Continue trying to always read if we should */
+ if (!priv->throttled) {
+ usb_fill_int_urb(priv->int_urb, priv->udev,
+ usb_rcvintpipe(priv->udev,
+ priv->int_address),
+ priv->int_buffer, priv->buffer_size,
+ symbol_int_callback, priv, priv->bInterval);
+ result = usb_submit_urb(priv->int_urb, GFP_ATOMIC);
+ if (result)
+ dev_err(&port->dev,
+ "%s - failed resubmitting read urb, error %d\n",
+ __func__, result);
+ } else
+ priv->actually_throttled = true;
+ spin_unlock(&priv->lock);
+}
+
+static int symbol_open(struct tty_struct *tty, struct usb_serial_port *port,
+ struct file *filp)
+{
+ struct symbol_private *priv = usb_get_serial_data(port->serial);
+ unsigned long flags;
+ int result = 0;
+
+ dbg("%s - port %d", __func__, port->number);
+
+ spin_lock_irqsave(&priv->lock, flags);
+ priv->throttled = false;
+ priv->actually_throttled = false;
+ priv->port = port;
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ /*
+ * Force low_latency on so that our tty_push actually forces the data
+ * through, otherwise it is scheduled, and with high data rates (like
+ * with OHCI) data can get lost.
+ */
+ if (tty)
+ tty->low_latency = 1;
+
+ /* Start reading from the device */
+ usb_fill_int_urb(priv->int_urb, priv->udev,
+ usb_rcvintpipe(priv->udev, priv->int_address),
+ priv->int_buffer, priv->buffer_size,
+ symbol_int_callback, priv, priv->bInterval);
+ result = usb_submit_urb(priv->int_urb, GFP_KERNEL);
+ if (result)
+ dev_err(&port->dev,
+ "%s - failed resubmitting read urb, error %d\n",
+ __func__, result);
+ return result;
+}
+
+static void symbol_close(struct tty_struct *tty, struct usb_serial_port *port,
+ struct file *filp)
+{
+ struct symbol_private *priv = usb_get_serial_data(port->serial);
+
+ dbg("%s - port %d", __func__, port->number);
+
+ /* shutdown our urbs */
+ usb_kill_urb(priv->int_urb);
+}
+
+static void symbol_throttle(struct tty_struct *tty)
+{
+ struct usb_serial_port *port = tty->driver_data;
+ struct symbol_private *priv = usb_get_serial_data(port->serial);
+ unsigned long flags;
+
+ dbg("%s - port %d", __func__, port->number);
+ spin_lock_irqsave(&priv->lock, flags);
+ priv->throttled = true;
+ spin_unlock_irqrestore(&priv->lock, flags);
+}
+
+static void symbol_unthrottle(struct tty_struct *tty)
+{
+ struct usb_serial_port *port = tty->driver_data;
+ struct symbol_private *priv = usb_get_serial_data(port->serial);
+ unsigned long flags;
+ int result;
+
+ dbg("%s - port %d", __func__, port->number);
+
+ spin_lock_irqsave(&priv->lock, flags);
+ priv->throttled = false;
+ priv->actually_throttled = false;
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ priv->int_urb->dev = port->serial->dev;
+ result = usb_submit_urb(priv->int_urb, GFP_ATOMIC);
+ if (result)
+ dev_err(&port->dev,
+ "%s - failed submitting read urb, error %d\n",
+ __func__, result);
+}
+
+static int symbol_ioctl(struct tty_struct *tty, struct file *file,
+ unsigned int cmd, unsigned long arg)
+{
+ struct usb_serial_port *port = tty->driver_data;
+ struct device *dev = &port->dev;
+
+ /*
+ * Right now we need to figure out what commands
+ * most userspace tools want to see for this driver,
+ * so just log the things.
+ */
+ switch (cmd) {
+ case TIOCSERGETLSR:
+ dev_info(dev, "%s: TIOCSERGETLSR\n", __func__);
+ break;
+
+ case TIOCGSERIAL:
+ dev_info(dev, "%s: TIOCGSERIAL\n", __func__);
+ break;
+
+ case TIOCMIWAIT:
+ dev_info(dev, "%s: TIOCMIWAIT\n", __func__);
+ break;
+
+ case TIOCGICOUNT:
+ dev_info(dev, "%s: TIOCGICOUNT\n", __func__);
+ break;
+ default:
+ dev_info(dev, "%s: unknown (%d)\n", __func__, cmd);
+ }
+ return -ENOIOCTLCMD;
+}
+
+static int symbol_tiocmget(struct tty_struct *tty, struct file *file)
+{
+ struct usb_serial_port *port = tty->driver_data;
+ struct device *dev = &port->dev;
+
+ /* TODO */
+ /* probably just need to shadow whatever was sent to us here */
+ dev_info(dev, "%s\n", __func__);
+ return 0;
+}
+
+static int symbol_tiocmset(struct tty_struct *tty, struct file *file,
+ unsigned int set, unsigned int clear)
+{
+ struct usb_serial_port *port = tty->driver_data;
+ struct device *dev = &port->dev;
+
+ /* TODO */
+ /* probably just need to shadow whatever was sent to us here */
+ dev_info(dev, "%s\n", __func__);
+ return 0;
+}
+
+static int symbol_startup(struct usb_serial *serial)
+{
+ struct symbol_private *priv;
+ struct usb_host_interface *intf;
+ int i;
+ int retval = -ENOMEM;
+ bool int_in_found = false;
+
+ /* create our private serial structure */
+ priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+ if (priv == NULL) {
+ dev_err(&serial->dev->dev, "%s - Out of memory\n", __func__);
+ return -ENOMEM;
+ }
+ spin_lock_init(&priv->lock);
+ priv->serial = serial;
+ priv->port = serial->port[0];
+ priv->udev = serial->dev;
+
+ /* find our interrupt endpoint */
+ intf = serial->interface->altsetting;
+ for (i = 0; i < intf->desc.bNumEndpoints; ++i) {
+ struct usb_endpoint_descriptor *endpoint;
+
+ endpoint = &intf->endpoint[i].desc;
+ if (!usb_endpoint_is_int_in(endpoint))
+ continue;
+
+ priv->int_urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (!priv->int_urb) {
+ dev_err(&priv->udev->dev, "out of memory\n");
+ goto error;
+ }
+
+ priv->buffer_size = le16_to_cpu(endpoint->wMaxPacketSize) * 2;
+ priv->int_buffer = kmalloc(priv->buffer_size, GFP_KERNEL);
+ if (!priv->int_buffer) {
+ dev_err(&priv->udev->dev, "out of memory\n");
+ goto error;
+ }
+
+ priv->int_address = endpoint->bEndpointAddress;
+ priv->bInterval = endpoint->bInterval;
+
+ /* set up our int urb */
+ usb_fill_int_urb(priv->int_urb, priv->udev,
+ usb_rcvintpipe(priv->udev,
+ endpoint->bEndpointAddress),
+ priv->int_buffer, priv->buffer_size,
+ symbol_int_callback, priv, priv->bInterval);
+
+ int_in_found = true;
+ break;
+ }
+
+ if (!int_in_found) {
+ dev_err(&priv->udev->dev,
+ "Error - the proper endpoints were not found!\n");
+ goto error;
+ }
+
+ usb_set_serial_data(serial, priv);
+ return 0;
+
+error:
+ usb_free_urb(priv->int_urb);
+ kfree(priv->int_buffer);
+ kfree(priv);
+ return retval;
+}
+
+static void symbol_shutdown(struct usb_serial *serial)
+{
+ struct symbol_private *priv = usb_get_serial_data(serial);
+
+ dbg("%s", __func__);
+
+ usb_kill_urb(priv->int_urb);
+ usb_free_urb(priv->int_urb);
+ kfree(priv->int_buffer);
+ kfree(priv);
+ usb_set_serial_data(serial, NULL);
+}
+
+static struct usb_driver symbol_driver = {
+ .name = "symbol",
+ .probe = usb_serial_probe,
+ .disconnect = usb_serial_disconnect,
+ .id_table = id_table,
+ .no_dynamic_id = 1,
+};
+
+static struct usb_serial_driver symbol_device = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "symbol",
+ },
+ .id_table = id_table,
+ .usb_driver = &symbol_driver,
+ .num_ports = 1,
+ .attach = symbol_startup,
+ .open = symbol_open,
+ .close = symbol_close,
+ .shutdown = symbol_shutdown,
+ .throttle = symbol_throttle,
+ .unthrottle = symbol_unthrottle,
+ .ioctl = symbol_ioctl,
+ .tiocmget = symbol_tiocmget,
+ .tiocmset = symbol_tiocmset,
+};
+
+static int __init symbol_init(void)
+{
+ int retval;
+
+ retval = usb_serial_register(&symbol_device);
+ if (retval)
+ return retval;
+ retval = usb_register(&symbol_driver);
+ if (retval)
+ usb_serial_deregister(&symbol_device);
+ return retval;
+}
+
+static void __exit symbol_exit(void)
+{
+ usb_deregister(&symbol_driver);
+ usb_serial_deregister(&symbol_device);
+}
+
+module_init(symbol_init);
+module_exit(symbol_exit);
+MODULE_LICENSE("GPL");
+
+module_param(debug, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Debug enabled or not");
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index cfcfd5ab06ce..2a70563bbee1 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -26,6 +26,7 @@
#include <linux/tty_flip.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
+#include <linux/seq_file.h>
#include <linux/spinlock.h>
#include <linux/mutex.h>
#include <linux/list.h>
@@ -204,6 +205,11 @@ static int serial_open (struct tty_struct *tty, struct file *filp)
goto bailout_kref_put;
}
+ if (port->serial->disconnected) {
+ retval = -ENODEV;
+ goto bailout_kref_put;
+ }
+
if (mutex_lock_interruptible(&port->mutex)) {
retval = -ERESTARTSYS;
goto bailout_kref_put;
@@ -416,57 +422,52 @@ static int serial_break(struct tty_struct *tty, int break_state)
return 0;
}
-static int serial_read_proc(char *page, char **start, off_t off, int count,
- int *eof, void *data)
+static int serial_proc_show(struct seq_file *m, void *v)
{
struct usb_serial *serial;
- int length = 0;
int i;
- off_t begin = 0;
char tmp[40];
dbg("%s", __func__);
- length += sprintf(page, "usbserinfo:1.0 driver:2.0\n");
- for (i = 0; i < SERIAL_TTY_MINORS && length < PAGE_SIZE; ++i) {
+ seq_puts(m, "usbserinfo:1.0 driver:2.0\n");
+ for (i = 0; i < SERIAL_TTY_MINORS; ++i) {
serial = usb_serial_get_by_index(i);
if (serial == NULL)
continue;
- length += sprintf(page+length, "%d:", i);
+ seq_printf(m, "%d:", i);
if (serial->type->driver.owner)
- length += sprintf(page+length, " module:%s",
+ seq_printf(m, " module:%s",
module_name(serial->type->driver.owner));
- length += sprintf(page+length, " name:\"%s\"",
+ seq_printf(m, " name:\"%s\"",
serial->type->description);
- length += sprintf(page+length, " vendor:%04x product:%04x",
+ seq_printf(m, " vendor:%04x product:%04x",
le16_to_cpu(serial->dev->descriptor.idVendor),
le16_to_cpu(serial->dev->descriptor.idProduct));
- length += sprintf(page+length, " num_ports:%d",
- serial->num_ports);
- length += sprintf(page+length, " port:%d",
- i - serial->minor + 1);
+ seq_printf(m, " num_ports:%d", serial->num_ports);
+ seq_printf(m, " port:%d", i - serial->minor + 1);
usb_make_path(serial->dev, tmp, sizeof(tmp));
- length += sprintf(page+length, " path:%s", tmp);
+ seq_printf(m, " path:%s", tmp);
- length += sprintf(page+length, "\n");
- if ((length + begin) > (off + count)) {
- usb_serial_put(serial);
- goto done;
- }
- if ((length + begin) < off) {
- begin += length;
- length = 0;
- }
+ seq_putc(m, '\n');
usb_serial_put(serial);
}
- *eof = 1;
-done:
- if (off >= (length + begin))
- return 0;
- *start = page + (off-begin);
- return (count < begin+length-off) ? count : begin+length-off;
+ return 0;
+}
+
+static int serial_proc_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, serial_proc_show, NULL);
}
+static const struct file_operations serial_proc_fops = {
+ .owner = THIS_MODULE,
+ .open = serial_proc_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
static int serial_tiocmget(struct tty_struct *tty, struct file *file)
{
struct usb_serial_port *port = tty->driver_data;
@@ -1067,6 +1068,8 @@ int usb_serial_suspend(struct usb_interface *intf, pm_message_t message)
struct usb_serial_port *port;
int i, r = 0;
+ serial->suspending = 1;
+
for (i = 0; i < serial->num_ports; ++i) {
port = serial->port[i];
if (port)
@@ -1083,10 +1086,15 @@ EXPORT_SYMBOL(usb_serial_suspend);
int usb_serial_resume(struct usb_interface *intf)
{
struct usb_serial *serial = usb_get_intfdata(intf);
+ int rv;
+ serial->suspending = 0;
if (serial->type->resume)
- return serial->type->resume(serial);
- return 0;
+ rv = serial->type->resume(serial);
+ else
+ rv = usb_serial_generic_resume(serial);
+
+ return rv;
}
EXPORT_SYMBOL(usb_serial_resume);
@@ -1101,9 +1109,9 @@ static const struct tty_operations serial_ops = {
.unthrottle = serial_unthrottle,
.break_ctl = serial_break,
.chars_in_buffer = serial_chars_in_buffer,
- .read_proc = serial_read_proc,
.tiocmget = serial_tiocmget,
.tiocmset = serial_tiocmset,
+ .proc_fops = &serial_proc_fops,
};
struct tty_driver *usb_serial_tty_driver;
@@ -1222,7 +1230,6 @@ static void fixup_generic(struct usb_serial_driver *device)
set_to_generic_if_null(device, read_bulk_callback);
set_to_generic_if_null(device, write_bulk_callback);
set_to_generic_if_null(device, shutdown);
- set_to_generic_if_null(device, resume);
}
int usb_serial_register(struct usb_serial_driver *driver)
@@ -1230,6 +1237,9 @@ int usb_serial_register(struct usb_serial_driver *driver)
/* must be called with BKL held */
int retval;
+ if (usb_disabled())
+ return -ENODEV;
+
fixup_generic(driver);
if (!driver->description)
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-30 06:30:29 +0300