summaryrefslogtreecommitdiff
path: root/drivers/usb/serial/ftdi_sio.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/serial/ftdi_sio.c')
-rw-r--r--drivers/usb/serial/ftdi_sio.c66
1 files changed, 40 insertions, 26 deletions
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 9ced8937a8f3..ce0d7b0db012 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -33,7 +33,6 @@
#include <linux/kernel.h>
#include <linux/errno.h>
-#include <linux/init.h>
#include <linux/slab.h>
#include <linux/tty.h>
#include <linux/tty_driver.h>
@@ -145,7 +144,7 @@ static struct ftdi_sio_quirk ftdi_8u2232c_quirk = {
* Device ID not listed? Test it using
* /sys/bus/usb-serial/drivers/ftdi_sio/new_id and send a patch or report.
*/
-static struct usb_device_id id_table_combined [] = {
+static const struct usb_device_id id_table_combined[] = {
{ USB_DEVICE(FTDI_VID, FTDI_ZEITCONTROL_TAGTRACE_MIFARE_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_CTI_MINI_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_CTI_NANO_PID) },
@@ -1695,11 +1694,8 @@ static int ftdi_sio_port_probe(struct usb_serial_port *port)
priv = kzalloc(sizeof(struct ftdi_private), GFP_KERNEL);
- if (!priv) {
- dev_err(&port->dev, "%s- kmalloc(%Zd) failed.\n", __func__,
- sizeof(struct ftdi_private));
+ if (!priv)
return -ENOMEM;
- }
mutex_init(&priv->cfg_lock);
@@ -2123,6 +2119,30 @@ static void ftdi_set_termios(struct tty_struct *tty,
termios->c_cflag |= CRTSCTS;
}
+ /*
+ * All FTDI UART chips are limited to CS7/8. We shouldn't pretend to
+ * support CS5/6 and revert the CSIZE setting instead.
+ *
+ * CS5 however is used to control some smartcard readers which abuse
+ * this limitation to switch modes. Original FTDI chips fall back to
+ * eight data bits.
+ *
+ * TODO: Implement a quirk to only allow this with mentioned
+ * readers. One I know of (Argolis Smartreader V1)
+ * returns "USB smartcard server" as iInterface string.
+ * The vendor didn't bother with a custom VID/PID of
+ * course.
+ */
+ if (C_CSIZE(tty) == CS6) {
+ dev_warn(ddev, "requested CSIZE setting not supported\n");
+
+ termios->c_cflag &= ~CSIZE;
+ if (old_termios)
+ termios->c_cflag |= old_termios->c_cflag & CSIZE;
+ else
+ termios->c_cflag |= CS8;
+ }
+
cflag = termios->c_cflag;
if (!old_termios)
@@ -2159,19 +2179,19 @@ no_skip:
} else {
urb_value |= FTDI_SIO_SET_DATA_PARITY_NONE;
}
- if (cflag & CSIZE) {
- switch (cflag & CSIZE) {
- case CS7:
- urb_value |= 7;
- dev_dbg(ddev, "Setting CS7\n");
- break;
- case CS8:
- urb_value |= 8;
- dev_dbg(ddev, "Setting CS8\n");
- break;
- default:
- dev_err(ddev, "CSIZE was set but not CS7-CS8\n");
- }
+ switch (cflag & CSIZE) {
+ case CS5:
+ dev_dbg(ddev, "Setting CS5 quirk\n");
+ break;
+ case CS7:
+ urb_value |= 7;
+ dev_dbg(ddev, "Setting CS7\n");
+ break;
+ default:
+ case CS8:
+ urb_value |= 8;
+ dev_dbg(ddev, "Setting CS8\n");
+ break;
}
/* This is needed by the break command since it uses the same command
@@ -2372,8 +2392,6 @@ static int ftdi_ioctl(struct tty_struct *tty,
{
struct usb_serial_port *port = tty->driver_data;
- dev_dbg(&port->dev, "%s cmd 0x%04x\n", __func__, cmd);
-
/* Based on code from acm.c and others */
switch (cmd) {
@@ -2390,11 +2408,7 @@ static int ftdi_ioctl(struct tty_struct *tty,
default:
break;
}
- /* This is not necessarily an error - turns out the higher layers
- * will do some ioctls themselves (see comment above)
- */
- dev_dbg(&port->dev, "%s arg not supported - it was 0x%04x - check /usr/include/asm/ioctls.h\n",
- __func__, cmd);
+
return -ENOIOCTLCMD;
}