diff options
Diffstat (limited to 'drivers/usb/renesas_usbhs')
-rw-r--r-- | drivers/usb/renesas_usbhs/Kconfig | 1 | ||||
-rw-r--r-- | drivers/usb/renesas_usbhs/Makefile | 2 | ||||
-rw-r--r-- | drivers/usb/renesas_usbhs/common.c | 214 | ||||
-rw-r--r-- | drivers/usb/renesas_usbhs/common.h | 9 | ||||
-rw-r--r-- | drivers/usb/renesas_usbhs/fifo.c | 52 | ||||
-rw-r--r-- | drivers/usb/renesas_usbhs/mod.c | 23 | ||||
-rw-r--r-- | drivers/usb/renesas_usbhs/mod.h | 26 | ||||
-rw-r--r-- | drivers/usb/renesas_usbhs/mod_gadget.c | 7 | ||||
-rw-r--r-- | drivers/usb/renesas_usbhs/rcar2.c | 22 | ||||
-rw-r--r-- | drivers/usb/renesas_usbhs/rcar2.h | 3 | ||||
-rw-r--r-- | drivers/usb/renesas_usbhs/rcar3.c | 33 | ||||
-rw-r--r-- | drivers/usb/renesas_usbhs/rcar3.h | 5 | ||||
-rw-r--r-- | drivers/usb/renesas_usbhs/rza.c | 18 | ||||
-rw-r--r-- | drivers/usb/renesas_usbhs/rza.h | 3 | ||||
-rw-r--r-- | drivers/usb/renesas_usbhs/rza2.c | 74 |
15 files changed, 278 insertions, 214 deletions
diff --git a/drivers/usb/renesas_usbhs/Kconfig b/drivers/usb/renesas_usbhs/Kconfig index 7fdbff23ae8b..d6b3fef3e55b 100644 --- a/drivers/usb/renesas_usbhs/Kconfig +++ b/drivers/usb/renesas_usbhs/Kconfig @@ -8,7 +8,6 @@ config USB_RENESAS_USBHS depends on USB_GADGET depends on ARCH_RENESAS || SUPERH || COMPILE_TEST depends on EXTCON || !EXTCON # if EXTCON=m, USBHS cannot be built-in - default n help Renesas USBHS is a discrete USB host and peripheral controller chip that supports both full and high speed USB 2.0 data transfers. diff --git a/drivers/usb/renesas_usbhs/Makefile b/drivers/usb/renesas_usbhs/Makefile index 5c5b51bb48ef..a1fed56b0957 100644 --- a/drivers/usb/renesas_usbhs/Makefile +++ b/drivers/usb/renesas_usbhs/Makefile @@ -5,7 +5,7 @@ obj-$(CONFIG_USB_RENESAS_USBHS) += renesas_usbhs.o -renesas_usbhs-y := common.o mod.o pipe.o fifo.o rcar2.o rcar3.o rza.o +renesas_usbhs-y := common.o mod.o pipe.o fifo.o rcar2.o rcar3.o rza.o rza2.o ifneq ($(CONFIG_USB_RENESAS_USBHS_HCD),) renesas_usbhs-y += mod_host.o diff --git a/drivers/usb/renesas_usbhs/common.c b/drivers/usb/renesas_usbhs/common.c index 249fbee97f3f..4c3de777ef6c 100644 --- a/drivers/usb/renesas_usbhs/common.c +++ b/drivers/usb/renesas_usbhs/common.c @@ -3,6 +3,7 @@ * Renesas USB driver * * Copyright (C) 2011 Renesas Solutions Corp. + * Copyright (C) 2019 Renesas Electronics Corporation * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> */ #include <linux/clk.h> @@ -43,15 +44,6 @@ * | .... | +-----------+ */ - -#define USBHSF_RUNTIME_PWCTRL (1 << 0) - -/* status */ -#define usbhsc_flags_init(p) do {(p)->flags = 0; } while (0) -#define usbhsc_flags_set(p, b) ((p)->flags |= (b)) -#define usbhsc_flags_clr(p, b) ((p)->flags &= ~(b)) -#define usbhsc_flags_has(p, b) ((p)->flags & (b)) - /* * platform call back * @@ -61,8 +53,8 @@ */ #define usbhs_platform_call(priv, func, args...)\ (!(priv) ? -ENODEV : \ - !((priv)->pfunc.func) ? 0 : \ - (priv)->pfunc.func(args)) + !((priv)->pfunc->func) ? 0 : \ + (priv)->pfunc->func(args)) /* * common functions @@ -92,6 +84,11 @@ struct usbhs_priv *usbhs_pdev_to_priv(struct platform_device *pdev) return dev_get_drvdata(&pdev->dev); } +int usbhs_get_id_as_gadget(struct platform_device *pdev) +{ + return USBHS_GADGET; +} + /* * syscfg functions */ @@ -104,10 +101,6 @@ void usbhs_sys_host_ctrl(struct usbhs_priv *priv, int enable) { u16 mask = DCFM | DRPD | DPRPU | HSE | USBE; u16 val = DCFM | DRPD | HSE | USBE; - int has_otg = usbhs_get_dparam(priv, has_otg); - - if (has_otg) - usbhs_bset(priv, DVSTCTR, (EXTLP | PWEN), (EXTLP | PWEN)); /* * if enable @@ -123,6 +116,12 @@ void usbhs_sys_function_ctrl(struct usbhs_priv *priv, int enable) u16 mask = DCFM | DRPD | DPRPU | HSE | USBE; u16 val = HSE | USBE; + /* CNEN bit is required for function operation */ + if (usbhs_get_dparam(priv, has_cnen)) { + mask |= CNEN; + val |= CNEN; + } + /* * if enable * @@ -294,11 +293,7 @@ static void usbhsc_set_buswait(struct usbhs_priv *priv) static bool usbhsc_is_multi_clks(struct usbhs_priv *priv) { - if (priv->dparam.type == USBHS_TYPE_RCAR_GEN3 || - priv->dparam.type == USBHS_TYPE_RCAR_GEN3_WITH_PLL) - return true; - - return false; + return priv->dparam.multi_clks; } static int usbhsc_clk_get(struct device *dev, struct usbhs_priv *priv) @@ -307,7 +302,7 @@ static int usbhsc_clk_get(struct device *dev, struct usbhs_priv *priv) return 0; /* The first clock should exist */ - priv->clks[0] = of_clk_get(dev->of_node, 0); + priv->clks[0] = of_clk_get(dev_of_node(dev), 0); if (IS_ERR(priv->clks[0])) return PTR_ERR(priv->clks[0]); @@ -315,7 +310,7 @@ static int usbhsc_clk_get(struct device *dev, struct usbhs_priv *priv) * To backward compatibility with old DT, this driver checks the return * value if it's -ENOENT or not. */ - priv->clks[1] = of_clk_get(dev->of_node, 1); + priv->clks[1] = of_clk_get(dev_of_node(dev), 1); if (PTR_ERR(priv->clks[1]) == -ENOENT) priv->clks[1] = NULL; else if (IS_ERR(priv->clks[1])) @@ -454,7 +449,7 @@ static void usbhsc_hotplug(struct usbhs_priv *priv) /* * get vbus status from platform */ - enable = usbhs_platform_call(priv, get_vbus, pdev); + enable = usbhs_mod_info_call(priv, get_vbus, pdev); /* * get id from platform @@ -479,7 +474,7 @@ static void usbhsc_hotplug(struct usbhs_priv *priv) dev_dbg(&pdev->dev, "%s enable\n", __func__); /* power on */ - if (usbhsc_flags_has(priv, USBHSF_RUNTIME_PWCTRL)) + if (usbhs_get_dparam(priv, runtime_pwctrl)) usbhsc_power_ctrl(priv, enable); /* bus init */ @@ -499,7 +494,7 @@ static void usbhsc_hotplug(struct usbhs_priv *priv) usbhsc_bus_init(priv); /* power off */ - if (usbhsc_flags_has(priv, USBHSF_RUNTIME_PWCTRL)) + if (usbhs_get_dparam(priv, runtime_pwctrl)) usbhsc_power_ctrl(priv, enable); usbhs_mod_change(priv, -1); @@ -520,7 +515,7 @@ static void usbhsc_notify_hotplug(struct work_struct *work) usbhsc_hotplug(priv); } -static int usbhsc_drvcllbck_notify_hotplug(struct platform_device *pdev) +int usbhsc_schedule_notify_hotplug(struct platform_device *pdev) { struct usbhs_priv *priv = usbhs_pdev_to_priv(pdev); int delay = usbhs_get_dparam(priv, detection_delay); @@ -541,115 +536,86 @@ static int usbhsc_drvcllbck_notify_hotplug(struct platform_device *pdev) static const struct of_device_id usbhs_of_match[] = { { .compatible = "renesas,usbhs-r8a774c0", - .data = (void *)USBHS_TYPE_RCAR_GEN3_WITH_PLL, + .data = &usbhs_rcar_gen3_with_pll_plat_info, }, { .compatible = "renesas,usbhs-r8a7790", - .data = (void *)USBHS_TYPE_RCAR_GEN2, + .data = &usbhs_rcar_gen2_plat_info, }, { .compatible = "renesas,usbhs-r8a7791", - .data = (void *)USBHS_TYPE_RCAR_GEN2, + .data = &usbhs_rcar_gen2_plat_info, }, { .compatible = "renesas,usbhs-r8a7794", - .data = (void *)USBHS_TYPE_RCAR_GEN2, + .data = &usbhs_rcar_gen2_plat_info, }, { .compatible = "renesas,usbhs-r8a7795", - .data = (void *)USBHS_TYPE_RCAR_GEN3, + .data = &usbhs_rcar_gen3_plat_info, }, { .compatible = "renesas,usbhs-r8a7796", - .data = (void *)USBHS_TYPE_RCAR_GEN3, + .data = &usbhs_rcar_gen3_plat_info, }, { .compatible = "renesas,usbhs-r8a77990", - .data = (void *)USBHS_TYPE_RCAR_GEN3_WITH_PLL, + .data = &usbhs_rcar_gen3_with_pll_plat_info, }, { .compatible = "renesas,usbhs-r8a77995", - .data = (void *)USBHS_TYPE_RCAR_GEN3_WITH_PLL, + .data = &usbhs_rcar_gen3_with_pll_plat_info, }, { .compatible = "renesas,rcar-gen2-usbhs", - .data = (void *)USBHS_TYPE_RCAR_GEN2, + .data = &usbhs_rcar_gen2_plat_info, }, { .compatible = "renesas,rcar-gen3-usbhs", - .data = (void *)USBHS_TYPE_RCAR_GEN3, + .data = &usbhs_rcar_gen3_plat_info, }, { .compatible = "renesas,rza1-usbhs", - .data = (void *)USBHS_TYPE_RZA1, + .data = &usbhs_rza1_plat_info, + }, + { + .compatible = "renesas,rza2-usbhs", + .data = &usbhs_rza2_plat_info, }, { }, }; MODULE_DEVICE_TABLE(of, usbhs_of_match); -static struct renesas_usbhs_platform_info *usbhs_parse_dt(struct device *dev) -{ - struct renesas_usbhs_platform_info *info; - struct renesas_usbhs_driver_param *dparam; - u32 tmp; - int gpio; - - info = devm_kzalloc(dev, sizeof(*info), GFP_KERNEL); - if (!info) - return NULL; - - dparam = &info->driver_param; - dparam->type = (uintptr_t)of_device_get_match_data(dev); - if (!of_property_read_u32(dev->of_node, "renesas,buswait", &tmp)) - dparam->buswait_bwait = tmp; - gpio = of_get_named_gpio_flags(dev->of_node, "renesas,enable-gpio", 0, - NULL); - if (gpio > 0) - dparam->enable_gpio = gpio; - - if (dparam->type == USBHS_TYPE_RCAR_GEN2 || - dparam->type == USBHS_TYPE_RCAR_GEN3 || - dparam->type == USBHS_TYPE_RCAR_GEN3_WITH_PLL) { - dparam->has_usb_dmac = 1; - dparam->pipe_configs = usbhsc_new_pipe; - dparam->pipe_size = ARRAY_SIZE(usbhsc_new_pipe); - } - - if (dparam->type == USBHS_TYPE_RZA1) { - dparam->pipe_configs = usbhsc_new_pipe; - dparam->pipe_size = ARRAY_SIZE(usbhsc_new_pipe); - } - - return info; -} - static int usbhs_probe(struct platform_device *pdev) { - struct renesas_usbhs_platform_info *info = renesas_usbhs_get_info(pdev); - struct renesas_usbhs_driver_callback *dfunc; + const struct renesas_usbhs_platform_info *info; struct usbhs_priv *priv; struct resource *res, *irq_res; - int ret; + struct device *dev = &pdev->dev; + int ret, gpio; + u32 tmp; /* check device node */ - if (pdev->dev.of_node) - info = pdev->dev.platform_data = usbhs_parse_dt(&pdev->dev); + if (dev_of_node(dev)) + info = of_device_get_match_data(dev); + else + info = renesas_usbhs_get_info(pdev); /* check platform information */ if (!info) { - dev_err(&pdev->dev, "no platform information\n"); + dev_err(dev, "no platform information\n"); return -EINVAL; } /* platform data */ irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); if (!irq_res) { - dev_err(&pdev->dev, "Not enough Renesas USB platform resources.\n"); + dev_err(dev, "Not enough Renesas USB platform resources.\n"); return -ENODEV; } /* usb private data */ - priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); if (!priv) return -ENOMEM; @@ -658,13 +624,13 @@ static int usbhs_probe(struct platform_device *pdev) if (IS_ERR(priv->base)) return PTR_ERR(priv->base); - if (of_property_read_bool(pdev->dev.of_node, "extcon")) { - priv->edev = extcon_get_edev_by_phandle(&pdev->dev, 0); + if (of_property_read_bool(dev_of_node(dev), "extcon")) { + priv->edev = extcon_get_edev_by_phandle(dev, 0); if (IS_ERR(priv->edev)) return PTR_ERR(priv->edev); } - priv->rsts = devm_reset_control_array_get_optional_shared(&pdev->dev); + priv->rsts = devm_reset_control_array_get_optional_shared(dev); if (IS_ERR(priv->rsts)) return PTR_ERR(priv->rsts); @@ -672,50 +638,35 @@ static int usbhs_probe(struct platform_device *pdev) * care platform info */ - memcpy(&priv->dparam, - &info->driver_param, - sizeof(struct renesas_usbhs_driver_param)); + priv->dparam = info->driver_param; - switch (priv->dparam.type) { - case USBHS_TYPE_RCAR_GEN2: - priv->pfunc = usbhs_rcar2_ops; - break; - case USBHS_TYPE_RCAR_GEN3: - priv->pfunc = usbhs_rcar3_ops; - break; - case USBHS_TYPE_RCAR_GEN3_WITH_PLL: - priv->pfunc = usbhs_rcar3_with_pll_ops; - break; - case USBHS_TYPE_RZA1: - priv->pfunc = usbhs_rza1_ops; - break; - default: - if (!info->platform_callback.get_id) { - dev_err(&pdev->dev, "no platform callbacks"); - return -EINVAL; - } - memcpy(&priv->pfunc, - &info->platform_callback, - sizeof(struct renesas_usbhs_platform_callback)); - break; + if (!info->platform_callback.get_id) { + dev_err(dev, "no platform callbacks\n"); + return -EINVAL; } - - /* set driver callback functions for platform */ - dfunc = &info->driver_callback; - dfunc->notify_hotplug = usbhsc_drvcllbck_notify_hotplug; + priv->pfunc = &info->platform_callback; /* set default param if platform doesn't have */ - if (!priv->dparam.pipe_configs) { + if (usbhs_get_dparam(priv, has_new_pipe_configs)) { + priv->dparam.pipe_configs = usbhsc_new_pipe; + priv->dparam.pipe_size = ARRAY_SIZE(usbhsc_new_pipe); + } else if (!priv->dparam.pipe_configs) { priv->dparam.pipe_configs = usbhsc_default_pipe; priv->dparam.pipe_size = ARRAY_SIZE(usbhsc_default_pipe); } if (!priv->dparam.pio_dma_border) priv->dparam.pio_dma_border = 64; /* 64byte */ + if (!of_property_read_u32(dev_of_node(dev), "renesas,buswait", &tmp)) + priv->dparam.buswait_bwait = tmp; + gpio = of_get_named_gpio_flags(dev_of_node(dev), "renesas,enable-gpio", + 0, NULL); + if (gpio > 0) + priv->dparam.enable_gpio = gpio; /* FIXME */ /* runtime power control ? */ - if (priv->pfunc.get_vbus) - usbhsc_flags_set(priv, USBHSF_RUNTIME_PWCTRL); + if (priv->pfunc->get_vbus) + usbhs_get_dparam(priv, runtime_pwctrl) = 1; /* * priv settings @@ -747,7 +698,7 @@ static int usbhs_probe(struct platform_device *pdev) if (ret) goto probe_fail_rst; - ret = usbhsc_clk_get(&pdev->dev, priv); + ret = usbhsc_clk_get(dev, priv); if (ret) goto probe_fail_clks; @@ -763,8 +714,7 @@ static int usbhs_probe(struct platform_device *pdev) ret = !gpio_get_value(priv->dparam.enable_gpio); gpio_free(priv->dparam.enable_gpio); if (ret) { - dev_warn(&pdev->dev, - "USB function not selected (GPIO %d)\n", + dev_warn(dev, "USB function not selected (GPIO %d)\n", priv->dparam.enable_gpio); ret = -ENOTSUPP; goto probe_end_mod_exit; @@ -780,7 +730,7 @@ static int usbhs_probe(struct platform_device *pdev) */ ret = usbhs_platform_call(priv, hardware_init, pdev); if (ret < 0) { - dev_err(&pdev->dev, "platform init failed.\n"); + dev_err(dev, "platform init failed.\n"); goto probe_end_mod_exit; } @@ -788,18 +738,20 @@ static int usbhs_probe(struct platform_device *pdev) usbhs_platform_call(priv, phy_reset, pdev); /* power control */ - pm_runtime_enable(&pdev->dev); - if (!usbhsc_flags_has(priv, USBHSF_RUNTIME_PWCTRL)) { + pm_runtime_enable(dev); + if (!usbhs_get_dparam(priv, runtime_pwctrl)) { usbhsc_power_ctrl(priv, 1); usbhs_mod_autonomy_mode(priv); + } else { + usbhs_mod_non_autonomy_mode(priv); } /* * manual call notify_hotplug for cold plug */ - usbhsc_drvcllbck_notify_hotplug(pdev); + usbhsc_schedule_notify_hotplug(pdev); - dev_info(&pdev->dev, "probed\n"); + dev_info(dev, "probed\n"); return ret; @@ -814,7 +766,7 @@ probe_end_fifo_exit: probe_end_pipe_exit: usbhs_pipe_remove(priv); - dev_info(&pdev->dev, "probe failed (%d)\n", ret); + dev_info(dev, "probe failed (%d)\n", ret); return ret; } @@ -822,15 +774,11 @@ probe_end_pipe_exit: static int usbhs_remove(struct platform_device *pdev) { struct usbhs_priv *priv = usbhs_pdev_to_priv(pdev); - struct renesas_usbhs_platform_info *info = renesas_usbhs_get_info(pdev); - struct renesas_usbhs_driver_callback *dfunc = &info->driver_callback; dev_dbg(&pdev->dev, "usb remove\n"); - dfunc->notify_hotplug = NULL; - /* power off */ - if (!usbhsc_flags_has(priv, USBHSF_RUNTIME_PWCTRL)) + if (!usbhs_get_dparam(priv, runtime_pwctrl)) usbhsc_power_ctrl(priv, 0); pm_runtime_disable(&pdev->dev); @@ -855,7 +803,7 @@ static __maybe_unused int usbhsc_suspend(struct device *dev) usbhs_mod_change(priv, -1); } - if (mod || !usbhsc_flags_has(priv, USBHSF_RUNTIME_PWCTRL)) + if (mod || !usbhs_get_dparam(priv, runtime_pwctrl)) usbhsc_power_ctrl(priv, 0); return 0; @@ -866,14 +814,14 @@ static __maybe_unused int usbhsc_resume(struct device *dev) struct usbhs_priv *priv = dev_get_drvdata(dev); struct platform_device *pdev = usbhs_priv_to_pdev(priv); - if (!usbhsc_flags_has(priv, USBHSF_RUNTIME_PWCTRL)) { + if (!usbhs_get_dparam(priv, runtime_pwctrl)) { usbhsc_power_ctrl(priv, 1); usbhs_mod_autonomy_mode(priv); } usbhs_platform_call(priv, phy_reset, pdev); - usbhsc_drvcllbck_notify_hotplug(pdev); + usbhsc_schedule_notify_hotplug(pdev); return 0; } diff --git a/drivers/usb/renesas_usbhs/common.h b/drivers/usb/renesas_usbhs/common.h index 3777af848a35..d1a0a35ecfff 100644 --- a/drivers/usb/renesas_usbhs/common.h +++ b/drivers/usb/renesas_usbhs/common.h @@ -3,6 +3,7 @@ * Renesas USB driver * * Copyright (C) 2011 Renesas Solutions Corp. + * Copyright (C) 2019 Renesas Electronics Corporation * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> */ #ifndef RENESAS_USB_DRIVER_H @@ -104,6 +105,7 @@ struct usbhs_priv; /* SYSCFG */ #define SCKE (1 << 10) /* USB Module Clock Enable */ +#define CNEN (1 << 8) /* Single-ended receiver operation Enable */ #define HSE (1 << 7) /* High-Speed Operation Enable */ #define DCFM (1 << 6) /* Controller Function Select */ #define DRPD (1 << 5) /* D+ Line/D- Line Resistance Control */ @@ -250,7 +252,7 @@ struct usbhs_priv { unsigned int irq; unsigned long irqflags; - struct renesas_usbhs_platform_callback pfunc; + const struct renesas_usbhs_platform_callback *pfunc; struct renesas_usbhs_driver_param dparam; struct delayed_work notify_hotplug_work; @@ -260,8 +262,6 @@ struct usbhs_priv { spinlock_t lock; - u32 flags; - /* * module control */ @@ -292,6 +292,8 @@ void usbhs_bset(struct usbhs_priv *priv, u32 reg, u16 mask, u16 data); #define usbhs_lock(p, f) spin_lock_irqsave(usbhs_priv_to_lock(p), f) #define usbhs_unlock(p, f) spin_unlock_irqrestore(usbhs_priv_to_lock(p), f) +int usbhs_get_id_as_gadget(struct platform_device *pdev); + /* * sysconfig */ @@ -313,6 +315,7 @@ void usbhs_bus_send_sof_enable(struct usbhs_priv *priv); void usbhs_bus_send_reset(struct usbhs_priv *priv); int usbhs_bus_get_speed(struct usbhs_priv *priv); int usbhs_vbus_ctrl(struct usbhs_priv *priv, int enable); +int usbhsc_schedule_notify_hotplug(struct platform_device *pdev); /* * frame diff --git a/drivers/usb/renesas_usbhs/fifo.c b/drivers/usb/renesas_usbhs/fifo.c index 39fa2fc1b8b7..2a01ceb71641 100644 --- a/drivers/usb/renesas_usbhs/fifo.c +++ b/drivers/usb/renesas_usbhs/fifo.c @@ -3,6 +3,7 @@ * Renesas USB driver * * Copyright (C) 2011 Renesas Solutions Corp. + * Copyright (C) 2019 Renesas Electronics Corporation * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> */ #include <linux/delay.h> @@ -12,7 +13,6 @@ #include "pipe.h" #define usbhsf_get_cfifo(p) (&((p)->fifo_info.cfifo)) -#define usbhsf_is_cfifo(p, f) (usbhsf_get_cfifo(p) == f) #define usbhsf_fifo_is_busy(f) ((f)->pipe) /* see usbhs_pipe_select_fifo */ @@ -325,10 +325,7 @@ static int usbhsf_fifo_select(struct usbhs_pipe *pipe, } /* "base" will be used below */ - if (usbhs_get_dparam(priv, has_sudmac) && !usbhsf_is_cfifo(priv, fifo)) - usbhs_write(priv, fifo->sel, base); - else - usbhs_write(priv, fifo->sel, base | MBW_32); + usbhs_write(priv, fifo->sel, base | MBW_32); /* check ISEL and CURPIPE value */ while (timeout--) { @@ -543,8 +540,13 @@ static int usbhsf_pio_try_push(struct usbhs_pkt *pkt, int *is_done) } /* the rest operation */ - for (i = 0; i < len; i++) - iowrite8(buf[i], addr + (0x03 - (i & 0x03))); + if (usbhs_get_dparam(priv, cfifo_byte_addr)) { + for (i = 0; i < len; i++) + iowrite8(buf[i], addr + (i & 0x03)); + } else { + for (i = 0; i < len; i++) + iowrite8(buf[i], addr + (0x03 - (i & 0x03))); + } /* * variable update @@ -802,9 +804,8 @@ static int __usbhsf_dma_map_ctrl(struct usbhs_pkt *pkt, int map) } static void usbhsf_dma_complete(void *arg); -static void xfer_work(struct work_struct *work) +static void usbhsf_dma_xfer_preparing(struct usbhs_pkt *pkt) { - struct usbhs_pkt *pkt = container_of(work, struct usbhs_pkt, work); struct usbhs_pipe *pipe = pkt->pipe; struct usbhs_fifo *fifo; struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); @@ -812,12 +813,10 @@ static void xfer_work(struct work_struct *work) struct dma_chan *chan; struct device *dev = usbhs_priv_to_dev(priv); enum dma_transfer_direction dir; - unsigned long flags; - usbhs_lock(priv, flags); fifo = usbhs_pipe_to_fifo(pipe); if (!fifo) - goto xfer_work_end; + return; chan = usbhsf_dma_chan_get(fifo, pkt); dir = usbhs_pipe_is_dir_in(pipe) ? DMA_DEV_TO_MEM : DMA_MEM_TO_DEV; @@ -826,7 +825,7 @@ static void xfer_work(struct work_struct *work) pkt->trans, dir, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); if (!desc) - goto xfer_work_end; + return; desc->callback = usbhsf_dma_complete; desc->callback_param = pipe; @@ -834,7 +833,7 @@ static void xfer_work(struct work_struct *work) pkt->cookie = dmaengine_submit(desc); if (pkt->cookie < 0) { dev_err(dev, "Failed to submit dma descriptor\n"); - goto xfer_work_end; + return; } dev_dbg(dev, " %s %d (%d/ %d)\n", @@ -845,8 +844,17 @@ static void xfer_work(struct work_struct *work) dma_async_issue_pending(chan); usbhsf_dma_start(pipe, fifo); usbhs_pipe_enable(pipe); +} -xfer_work_end: +static void xfer_work(struct work_struct *work) +{ + struct usbhs_pkt *pkt = container_of(work, struct usbhs_pkt, work); + struct usbhs_pipe *pipe = pkt->pipe; + struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); + unsigned long flags; + + usbhs_lock(priv, flags); + usbhsf_dma_xfer_preparing(pkt); usbhs_unlock(priv, flags); } @@ -899,8 +907,13 @@ static int usbhsf_dma_prepare_push(struct usbhs_pkt *pkt, int *is_done) pkt->trans = len; usbhsf_tx_irq_ctrl(pipe, 0); - INIT_WORK(&pkt->work, xfer_work); - schedule_work(&pkt->work); + /* FIXME: Workaound for usb dmac that driver can be used in atomic */ + if (usbhs_get_dparam(priv, has_usb_dmac)) { + usbhsf_dma_xfer_preparing(pkt); + } else { + INIT_WORK(&pkt->work, xfer_work); + schedule_work(&pkt->work); + } return 0; @@ -1006,8 +1019,7 @@ static int usbhsf_dma_prepare_pop_with_usb_dmac(struct usbhs_pkt *pkt, pkt->trans = pkt->length; - INIT_WORK(&pkt->work, xfer_work); - schedule_work(&pkt->work); + usbhsf_dma_xfer_preparing(pkt); return 0; @@ -1276,7 +1288,7 @@ static void usbhsf_dma_init(struct usbhs_priv *priv, struct usbhs_fifo *fifo, { struct device *dev = usbhs_priv_to_dev(priv); - if (dev->of_node) + if (dev_of_node(dev)) usbhsf_dma_init_dt(dev, fifo, channel); else usbhsf_dma_init_pdev(fifo); diff --git a/drivers/usb/renesas_usbhs/mod.c b/drivers/usb/renesas_usbhs/mod.c index 7475c4f64724..10fc65596014 100644 --- a/drivers/usb/renesas_usbhs/mod.c +++ b/drivers/usb/renesas_usbhs/mod.c @@ -3,6 +3,7 @@ * Renesas USB driver * * Copyright (C) 2011 Renesas Solutions Corp. + * Copyright (C) 2019 Renesas Electronics Corporation * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> */ #include <linux/interrupt.h> @@ -10,15 +11,6 @@ #include "common.h" #include "mod.h" -#define usbhs_priv_to_modinfo(priv) (&priv->mod_info) -#define usbhs_mod_info_call(priv, func, param...) \ -({ \ - struct usbhs_mod_info *info; \ - info = usbhs_priv_to_modinfo(priv); \ - !info->func ? 0 : \ - info->func(param); \ -}) - /* * autonomy * @@ -41,7 +33,7 @@ static int usbhsm_autonomy_irq_vbus(struct usbhs_priv *priv, { struct platform_device *pdev = usbhs_priv_to_pdev(priv); - renesas_usbhs_call_notify_hotplug(pdev); + usbhsc_schedule_notify_hotplug(pdev); return 0; } @@ -50,12 +42,19 @@ void usbhs_mod_autonomy_mode(struct usbhs_priv *priv) { struct usbhs_mod_info *info = usbhs_priv_to_modinfo(priv); - info->irq_vbus = usbhsm_autonomy_irq_vbus; - priv->pfunc.get_vbus = usbhsm_autonomy_get_vbus; + info->irq_vbus = usbhsm_autonomy_irq_vbus; + info->get_vbus = usbhsm_autonomy_get_vbus; usbhs_irq_callback_update(priv, NULL); } +void usbhs_mod_non_autonomy_mode(struct usbhs_priv *priv) +{ + struct usbhs_mod_info *info = usbhs_priv_to_modinfo(priv); + + info->get_vbus = priv->pfunc->get_vbus; +} + /* * host / gadget functions * diff --git a/drivers/usb/renesas_usbhs/mod.h b/drivers/usb/renesas_usbhs/mod.h index a4a61d6b82a1..65dc19ca528e 100644 --- a/drivers/usb/renesas_usbhs/mod.h +++ b/drivers/usb/renesas_usbhs/mod.h @@ -3,6 +3,7 @@ * Renesas USB driver * * Copyright (C) 2011 Renesas Solutions Corp. + * Copyright (C) 2019 Renesas Electronics Corporation * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> */ #ifndef RENESAS_USB_MOD_H @@ -84,15 +85,20 @@ struct usbhs_mod_info { /* * INTSTS0 :: VBINT * - * This function will be used as autonomy mode - * when platform cannot call notify_hotplug. + * This function will be used as autonomy mode (runtime_pwctrl == 0) + * when the platform doesn't have own get_vbus function. * - * This callback cannot be member of "struct usbhs_mod" - * because it will be used even though - * host/gadget has not been selected. + * This callback cannot be member of "struct usbhs_mod" because it + * will be used even though host/gadget has not been selected. */ int (*irq_vbus)(struct usbhs_priv *priv, struct usbhs_irq_state *irq_state); + + /* + * This function will be used on any gadget mode. To simplify the code, + * this member is in here. + */ + int (*get_vbus)(struct platform_device *pdev); }; /* @@ -107,6 +113,7 @@ int usbhs_mod_probe(struct usbhs_priv *priv); void usbhs_mod_remove(struct usbhs_priv *priv); void usbhs_mod_autonomy_mode(struct usbhs_priv *priv); +void usbhs_mod_non_autonomy_mode(struct usbhs_priv *priv); /* * status functions @@ -129,6 +136,15 @@ void usbhs_irq_callback_update(struct usbhs_priv *priv, struct usbhs_mod *mod); mod->func(param); \ }) +#define usbhs_priv_to_modinfo(priv) (&priv->mod_info) +#define usbhs_mod_info_call(priv, func, param...) \ +({ \ + struct usbhs_mod_info *info; \ + info = usbhs_priv_to_modinfo(priv); \ + !info->func ? 0 : \ + info->func(param); \ +}) + /* * host / gadget control */ diff --git a/drivers/usb/renesas_usbhs/mod_gadget.c b/drivers/usb/renesas_usbhs/mod_gadget.c index 59cac40aafcc..4d571a5205e2 100644 --- a/drivers/usb/renesas_usbhs/mod_gadget.c +++ b/drivers/usb/renesas_usbhs/mod_gadget.c @@ -3,6 +3,7 @@ * Renesas USB driver * * Copyright (C) 2011 Renesas Solutions Corp. + * Copyright (C) 2019 Renesas Electronics Corporation * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> */ #include <linux/delay.h> @@ -914,8 +915,8 @@ static void usbhs_mod_phy_mode(struct usbhs_priv *priv) { struct usbhs_mod_info *info = &priv->mod_info; - info->irq_vbus = NULL; - priv->pfunc.get_vbus = usbhsm_phy_get_vbus; + info->irq_vbus = NULL; + info->get_vbus = usbhsm_phy_get_vbus; usbhs_irq_callback_update(priv, NULL); } @@ -1023,7 +1024,7 @@ static int usbhsg_vbus_session(struct usb_gadget *gadget, int is_active) gpriv->vbus_active = !!is_active; - renesas_usbhs_call_notify_hotplug(pdev); + usbhsc_schedule_notify_hotplug(pdev); return 0; } diff --git a/drivers/usb/renesas_usbhs/rcar2.c b/drivers/usb/renesas_usbhs/rcar2.c index 0027092b1118..440d213e1749 100644 --- a/drivers/usb/renesas_usbhs/rcar2.c +++ b/drivers/usb/renesas_usbhs/rcar2.c @@ -3,6 +3,7 @@ * Renesas USB driver R-Car Gen. 2 initialization and power control * * Copyright (C) 2014 Ulrich Hecht + * Copyright (C) 2019 Renesas Electronics Corporation */ #include <linux/gpio.h> @@ -62,14 +63,15 @@ static int usbhs_rcar2_power_ctrl(struct platform_device *pdev, return retval; } -static int usbhs_rcar2_get_id(struct platform_device *pdev) -{ - return USBHS_GADGET; -} - -const struct renesas_usbhs_platform_callback usbhs_rcar2_ops = { - .hardware_init = usbhs_rcar2_hardware_init, - .hardware_exit = usbhs_rcar2_hardware_exit, - .power_ctrl = usbhs_rcar2_power_ctrl, - .get_id = usbhs_rcar2_get_id, +const struct renesas_usbhs_platform_info usbhs_rcar_gen2_plat_info = { + .platform_callback = { + .hardware_init = usbhs_rcar2_hardware_init, + .hardware_exit = usbhs_rcar2_hardware_exit, + .power_ctrl = usbhs_rcar2_power_ctrl, + .get_id = usbhs_get_id_as_gadget, + }, + .driver_param = { + .has_usb_dmac = 1, + .has_new_pipe_configs = 1, + }, }; diff --git a/drivers/usb/renesas_usbhs/rcar2.h b/drivers/usb/renesas_usbhs/rcar2.h index 45e3526cedeb..7d88732c5bff 100644 --- a/drivers/usb/renesas_usbhs/rcar2.h +++ b/drivers/usb/renesas_usbhs/rcar2.h @@ -1,5 +1,4 @@ // SPDX-License-Identifier: GPL-2.0 #include "common.h" -extern const struct renesas_usbhs_platform_callback - usbhs_rcar2_ops; +extern const struct renesas_usbhs_platform_info usbhs_rcar_gen2_plat_info; diff --git a/drivers/usb/renesas_usbhs/rcar3.c b/drivers/usb/renesas_usbhs/rcar3.c index 5e730e9b40ef..c181b2a0b9d3 100644 --- a/drivers/usb/renesas_usbhs/rcar3.c +++ b/drivers/usb/renesas_usbhs/rcar3.c @@ -2,7 +2,7 @@ /* * Renesas USB driver R-Car Gen. 3 initialization and power control * - * Copyright (C) 2016 Renesas Electronics Corporation + * Copyright (C) 2016-2019 Renesas Electronics Corporation */ #include <linux/delay.h> @@ -95,17 +95,26 @@ static int usbhs_rcar3_power_and_pll_ctrl(struct platform_device *pdev, return 0; } -static int usbhs_rcar3_get_id(struct platform_device *pdev) -{ - return USBHS_GADGET; -} - -const struct renesas_usbhs_platform_callback usbhs_rcar3_ops = { - .power_ctrl = usbhs_rcar3_power_ctrl, - .get_id = usbhs_rcar3_get_id, +const struct renesas_usbhs_platform_info usbhs_rcar_gen3_plat_info = { + .platform_callback = { + .power_ctrl = usbhs_rcar3_power_ctrl, + .get_id = usbhs_get_id_as_gadget, + }, + .driver_param = { + .has_usb_dmac = 1, + .multi_clks = 1, + .has_new_pipe_configs = 1, + }, }; -const struct renesas_usbhs_platform_callback usbhs_rcar3_with_pll_ops = { - .power_ctrl = usbhs_rcar3_power_and_pll_ctrl, - .get_id = usbhs_rcar3_get_id, +const struct renesas_usbhs_platform_info usbhs_rcar_gen3_with_pll_plat_info = { + .platform_callback = { + .power_ctrl = usbhs_rcar3_power_and_pll_ctrl, + .get_id = usbhs_get_id_as_gadget, + }, + .driver_param = { + .has_usb_dmac = 1, + .multi_clks = 1, + .has_new_pipe_configs = 1, + }, }; diff --git a/drivers/usb/renesas_usbhs/rcar3.h b/drivers/usb/renesas_usbhs/rcar3.h index 49e535a31771..c7c5ec1e3af2 100644 --- a/drivers/usb/renesas_usbhs/rcar3.h +++ b/drivers/usb/renesas_usbhs/rcar3.h @@ -1,5 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 #include "common.h" -extern const struct renesas_usbhs_platform_callback usbhs_rcar3_ops; -extern const struct renesas_usbhs_platform_callback usbhs_rcar3_with_pll_ops; +extern const struct renesas_usbhs_platform_info usbhs_rcar_gen3_plat_info; +extern const struct renesas_usbhs_platform_info + usbhs_rcar_gen3_with_pll_plat_info; diff --git a/drivers/usb/renesas_usbhs/rza.c b/drivers/usb/renesas_usbhs/rza.c index 8c739bd24acd..24de64edb674 100644 --- a/drivers/usb/renesas_usbhs/rza.c +++ b/drivers/usb/renesas_usbhs/rza.c @@ -3,7 +3,7 @@ * Renesas USB driver RZ/A initialization and power control * * Copyright (C) 2018 Chris Brandt - * Copyright (C) 2018 Renesas Electronics Corporation + * Copyright (C) 2018-2019 Renesas Electronics Corporation */ #include <linux/delay.h> @@ -41,12 +41,12 @@ static int usbhs_rza1_hardware_init(struct platform_device *pdev) return 0; } -static int usbhs_rza_get_id(struct platform_device *pdev) -{ - return USBHS_GADGET; -} - -const struct renesas_usbhs_platform_callback usbhs_rza1_ops = { - .hardware_init = usbhs_rza1_hardware_init, - .get_id = usbhs_rza_get_id, +const struct renesas_usbhs_platform_info usbhs_rza1_plat_info = { + .platform_callback = { + .hardware_init = usbhs_rza1_hardware_init, + .get_id = usbhs_get_id_as_gadget, + }, + .driver_param = { + .has_new_pipe_configs = 1, + }, }; diff --git a/drivers/usb/renesas_usbhs/rza.h b/drivers/usb/renesas_usbhs/rza.h index ca917ca54f6d..1ca42a6fd480 100644 --- a/drivers/usb/renesas_usbhs/rza.h +++ b/drivers/usb/renesas_usbhs/rza.h @@ -1,4 +1,5 @@ // SPDX-License-Identifier: GPL-2.0 #include "common.h" -extern const struct renesas_usbhs_platform_callback usbhs_rza1_ops; +extern const struct renesas_usbhs_platform_info usbhs_rza1_plat_info; +extern const struct renesas_usbhs_platform_info usbhs_rza2_plat_info; diff --git a/drivers/usb/renesas_usbhs/rza2.c b/drivers/usb/renesas_usbhs/rza2.c new file mode 100644 index 000000000000..021749594389 --- /dev/null +++ b/drivers/usb/renesas_usbhs/rza2.c @@ -0,0 +1,74 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Renesas USB driver RZ/A2 initialization and power control + * + * Copyright (C) 2019 Chris Brandt + * Copyright (C) 2019 Renesas Electronics Corporation + */ + +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/of_device.h> +#include <linux/phy/phy.h> +#include "common.h" +#include "rza.h" + +static int usbhs_rza2_hardware_init(struct platform_device *pdev) +{ + struct usbhs_priv *priv = usbhs_pdev_to_priv(pdev); + struct phy *phy = phy_get(&pdev->dev, "usb"); + + if (IS_ERR(phy)) + return PTR_ERR(phy); + + priv->phy = phy; + return 0; +} + +static int usbhs_rza2_hardware_exit(struct platform_device *pdev) +{ + struct usbhs_priv *priv = usbhs_pdev_to_priv(pdev); + + phy_put(priv->phy); + priv->phy = NULL; + + return 0; +} + +static int usbhs_rza2_power_ctrl(struct platform_device *pdev, + void __iomem *base, int enable) +{ + struct usbhs_priv *priv = usbhs_pdev_to_priv(pdev); + int retval = 0; + + if (!priv->phy) + return -ENODEV; + + if (enable) { + retval = phy_init(priv->phy); + usbhs_bset(priv, SUSPMODE, SUSPM, SUSPM); + udelay(100); /* Wait for PLL to become stable */ + if (!retval) + retval = phy_power_on(priv->phy); + } else { + usbhs_bset(priv, SUSPMODE, SUSPM, 0); + phy_power_off(priv->phy); + phy_exit(priv->phy); + } + + return retval; +} + +const struct renesas_usbhs_platform_info usbhs_rza2_plat_info = { + .platform_callback = { + .hardware_init = usbhs_rza2_hardware_init, + .hardware_exit = usbhs_rza2_hardware_exit, + .power_ctrl = usbhs_rza2_power_ctrl, + .get_id = usbhs_get_id_as_gadget, + }, + .driver_param = { + .has_cnen = 1, + .cfifo_byte_addr = 1, + .has_new_pipe_configs = 1, + }, +}; |