diff options
Diffstat (limited to 'drivers/usb/phy')
-rw-r--r-- | drivers/usb/phy/Kconfig | 16 | ||||
-rw-r--r-- | drivers/usb/phy/Makefile | 1 | ||||
-rw-r--r-- | drivers/usb/phy/phy-ab8500-usb.c | 2 | ||||
-rw-r--r-- | drivers/usb/phy/phy-msm-usb.c | 110 | ||||
-rw-r--r-- | drivers/usb/phy/phy-rcar-gen2-usb.c | 246 | ||||
-rw-r--r-- | drivers/usb/phy/phy.c | 97 |
6 files changed, 183 insertions, 289 deletions
diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig index 2175678e674e..869c0cfcad98 100644 --- a/drivers/usb/phy/Kconfig +++ b/drivers/usb/phy/Kconfig @@ -91,7 +91,7 @@ config TWL6030_USB config USB_GPIO_VBUS tristate "GPIO based peripheral-only VBUS sensing 'transceiver'" - depends on GPIOLIB + depends on GPIOLIB || COMPILE_TEST select USB_PHY help Provides simple GPIO VBUS sensing for controllers with an @@ -141,6 +141,7 @@ config USB_MSM_OTG tristate "Qualcomm on-chip USB OTG controller support" depends on (USB || USB_GADGET) && (ARCH_QCOM || COMPILE_TEST) depends on RESET_CONTROLLER + depends on EXTCON select USB_PHY help Enable this to support the USB OTG transceiver on Qualcomm chips. It @@ -186,19 +187,6 @@ config USB_RCAR_PHY To compile this driver as a module, choose M here: the module will be called phy-rcar-usb. -config USB_RCAR_GEN2_PHY - tristate "Renesas R-Car Gen2 USB PHY support" - depends on ARCH_R8A7790 || ARCH_R8A7791 || COMPILE_TEST - select USB_PHY - help - Say Y here to add support for the Renesas R-Car Gen2 USB PHY driver. - It is typically used to control internal USB PHY for USBHS, - and to configure shared USB channels 0 and 2. - This driver supports R8A7790 and R8A7791. - - To compile this driver as a module, choose M here: the - module will be called phy-rcar-gen2-usb. - config USB_ULPI bool "Generic ULPI Transceiver Driver" depends on ARM || ARM64 diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile index 75f2bba58c84..e36ab1d46d8b 100644 --- a/drivers/usb/phy/Makefile +++ b/drivers/usb/phy/Makefile @@ -23,7 +23,6 @@ obj-$(CONFIG_USB_MSM_OTG) += phy-msm-usb.o obj-$(CONFIG_USB_MV_OTG) += phy-mv-usb.o obj-$(CONFIG_USB_MXS_PHY) += phy-mxs-usb.o obj-$(CONFIG_USB_RCAR_PHY) += phy-rcar-usb.o -obj-$(CONFIG_USB_RCAR_GEN2_PHY) += phy-rcar-gen2-usb.o obj-$(CONFIG_USB_ULPI) += phy-ulpi.o obj-$(CONFIG_USB_ULPI_VIEWPORT) += phy-ulpi-viewport.o obj-$(CONFIG_KEYSTONE_USB_PHY) += phy-keystone.o diff --git a/drivers/usb/phy/phy-ab8500-usb.c b/drivers/usb/phy/phy-ab8500-usb.c index 03ab0c699f74..0c912d3950a5 100644 --- a/drivers/usb/phy/phy-ab8500-usb.c +++ b/drivers/usb/phy/phy-ab8500-usb.c @@ -1504,7 +1504,7 @@ static int ab8500_usb_remove(struct platform_device *pdev) return 0; } -static struct platform_device_id ab8500_usb_devtype[] = { +static const struct platform_device_id ab8500_usb_devtype[] = { { .name = "ab8500-usb", }, { .name = "ab8540-usb", }, { .name = "ab9540-usb", }, diff --git a/drivers/usb/phy/phy-msm-usb.c b/drivers/usb/phy/phy-msm-usb.c index c9156beeadef..00c49bb1bd29 100644 --- a/drivers/usb/phy/phy-msm-usb.c +++ b/drivers/usb/phy/phy-msm-usb.c @@ -240,8 +240,14 @@ static void ulpi_init(struct msm_otg *motg) static int msm_phy_notify_disconnect(struct usb_phy *phy, enum usb_device_speed speed) { + struct msm_otg *motg = container_of(phy, struct msm_otg, phy); int val; + if (motg->manual_pullup) { + val = ULPI_MISC_A_VBUSVLDEXT | ULPI_MISC_A_VBUSVLDEXTSEL; + usb_phy_io_write(phy, val, ULPI_CLR(ULPI_MISC_A)); + } + /* * Put the transceiver in non-driving mode. Otherwise host * may not detect soft-disconnection. @@ -422,6 +428,24 @@ static int msm_phy_init(struct usb_phy *phy) ulpi_write(phy, ulpi_val, ULPI_USB_INT_EN_FALL); } + if (motg->manual_pullup) { + val = ULPI_MISC_A_VBUSVLDEXTSEL | ULPI_MISC_A_VBUSVLDEXT; + ulpi_write(phy, val, ULPI_SET(ULPI_MISC_A)); + + val = readl(USB_GENCONFIG_2); + val |= GENCONFIG_2_SESS_VLD_CTRL_EN; + writel(val, USB_GENCONFIG_2); + + val = readl(USB_USBCMD); + val |= USBCMD_SESS_VLD_CTRL; + writel(val, USB_USBCMD); + + val = ulpi_read(phy, ULPI_FUNC_CTRL); + val &= ~ULPI_FUNC_CTRL_OPMODE_MASK; + val |= ULPI_FUNC_CTRL_OPMODE_NORMAL; + ulpi_write(phy, val, ULPI_FUNC_CTRL); + } + if (motg->phy_number) writel(readl(USB_PHY_CTRL2) | BIT(16), USB_PHY_CTRL2); @@ -1436,9 +1460,42 @@ static const struct of_device_id msm_otg_dt_match[] = { }; MODULE_DEVICE_TABLE(of, msm_otg_dt_match); +static int msm_otg_vbus_notifier(struct notifier_block *nb, unsigned long event, + void *ptr) +{ + struct msm_usb_cable *vbus = container_of(nb, struct msm_usb_cable, nb); + struct msm_otg *motg = container_of(vbus, struct msm_otg, vbus); + + if (event) + set_bit(B_SESS_VLD, &motg->inputs); + else + clear_bit(B_SESS_VLD, &motg->inputs); + + schedule_work(&motg->sm_work); + + return NOTIFY_DONE; +} + +static int msm_otg_id_notifier(struct notifier_block *nb, unsigned long event, + void *ptr) +{ + struct msm_usb_cable *id = container_of(nb, struct msm_usb_cable, nb); + struct msm_otg *motg = container_of(id, struct msm_otg, id); + + if (event) + clear_bit(ID, &motg->inputs); + else + set_bit(ID, &motg->inputs); + + schedule_work(&motg->sm_work); + + return NOTIFY_DONE; +} + static int msm_otg_read_dt(struct platform_device *pdev, struct msm_otg *motg) { struct msm_otg_platform_data *pdata; + struct extcon_dev *ext_id, *ext_vbus; const struct of_device_id *id; struct device_node *node = pdev->dev.of_node; struct property *prop; @@ -1487,6 +1544,54 @@ static int msm_otg_read_dt(struct platform_device *pdev, struct msm_otg *motg) motg->vdd_levels[VDD_LEVEL_MAX] = tmp[VDD_LEVEL_MAX]; } + motg->manual_pullup = of_property_read_bool(node, "qcom,manual-pullup"); + + ext_id = ERR_PTR(-ENODEV); + ext_vbus = ERR_PTR(-ENODEV); + if (of_property_read_bool(node, "extcon")) { + + /* Each one of them is not mandatory */ + ext_vbus = extcon_get_edev_by_phandle(&pdev->dev, 0); + if (IS_ERR(ext_vbus) && PTR_ERR(ext_vbus) != -ENODEV) + return PTR_ERR(ext_vbus); + + ext_id = extcon_get_edev_by_phandle(&pdev->dev, 1); + if (IS_ERR(ext_id) && PTR_ERR(ext_id) != -ENODEV) + return PTR_ERR(ext_id); + } + + if (!IS_ERR(ext_vbus)) { + motg->vbus.nb.notifier_call = msm_otg_vbus_notifier; + ret = extcon_register_interest(&motg->vbus.conn, ext_vbus->name, + "USB", &motg->vbus.nb); + if (ret < 0) { + dev_err(&pdev->dev, "register VBUS notifier failed\n"); + return ret; + } + + ret = extcon_get_cable_state(ext_vbus, "USB"); + if (ret) + set_bit(B_SESS_VLD, &motg->inputs); + else + clear_bit(B_SESS_VLD, &motg->inputs); + } + + if (!IS_ERR(ext_id)) { + motg->id.nb.notifier_call = msm_otg_id_notifier; + ret = extcon_register_interest(&motg->id.conn, ext_id->name, + "USB-HOST", &motg->id.nb); + if (ret < 0) { + dev_err(&pdev->dev, "register ID notifier failed\n"); + return ret; + } + + ret = extcon_get_cable_state(ext_id, "USB-HOST"); + if (ret) + clear_bit(ID, &motg->inputs); + else + set_bit(ID, &motg->inputs); + } + prop = of_find_property(node, "qcom,phy-init-sequence", &len); if (!prop || !len) return 0; @@ -1700,6 +1805,11 @@ static int msm_otg_remove(struct platform_device *pdev) if (phy->otg->host || phy->otg->gadget) return -EBUSY; + if (motg->id.conn.edev) + extcon_unregister_interest(&motg->id.conn); + if (motg->vbus.conn.edev) + extcon_unregister_interest(&motg->vbus.conn); + msm_otg_debugfs_cleanup(); cancel_delayed_work_sync(&motg->chg_work); cancel_work_sync(&motg->sm_work); diff --git a/drivers/usb/phy/phy-rcar-gen2-usb.c b/drivers/usb/phy/phy-rcar-gen2-usb.c deleted file mode 100644 index f81800b6562a..000000000000 --- a/drivers/usb/phy/phy-rcar-gen2-usb.c +++ /dev/null @@ -1,246 +0,0 @@ -/* - * Renesas R-Car Gen2 USB phy driver - * - * Copyright (C) 2013 Renesas Solutions Corp. - * Copyright (C) 2013 Cogent Embedded, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/clk.h> -#include <linux/delay.h> -#include <linux/io.h> -#include <linux/module.h> -#include <linux/platform_data/usb-rcar-gen2-phy.h> -#include <linux/platform_device.h> -#include <linux/spinlock.h> -#include <linux/usb/otg.h> - -struct rcar_gen2_usb_phy_priv { - struct usb_phy phy; - void __iomem *base; - struct clk *clk; - spinlock_t lock; - int usecount; - u32 ugctrl2; -}; - -#define usb_phy_to_priv(p) container_of(p, struct rcar_gen2_usb_phy_priv, phy) - -/* Low Power Status register */ -#define USBHS_LPSTS_REG 0x02 -#define USBHS_LPSTS_SUSPM (1 << 14) - -/* USB General control register */ -#define USBHS_UGCTRL_REG 0x80 -#define USBHS_UGCTRL_CONNECT (1 << 2) -#define USBHS_UGCTRL_PLLRESET (1 << 0) - -/* USB General control register 2 */ -#define USBHS_UGCTRL2_REG 0x84 -#define USBHS_UGCTRL2_USB0_PCI (1 << 4) -#define USBHS_UGCTRL2_USB0_HS (3 << 4) -#define USBHS_UGCTRL2_USB2_PCI (0 << 31) -#define USBHS_UGCTRL2_USB2_SS (1 << 31) - -/* USB General status register */ -#define USBHS_UGSTS_REG 0x88 -#define USBHS_UGSTS_LOCK (1 << 8) - -/* Enable USBHS internal phy */ -static int __rcar_gen2_usbhs_phy_enable(void __iomem *base) -{ - u32 val; - int i; - - /* USBHS PHY power on */ - val = ioread32(base + USBHS_UGCTRL_REG); - val &= ~USBHS_UGCTRL_PLLRESET; - iowrite32(val, base + USBHS_UGCTRL_REG); - - val = ioread16(base + USBHS_LPSTS_REG); - val |= USBHS_LPSTS_SUSPM; - iowrite16(val, base + USBHS_LPSTS_REG); - - for (i = 0; i < 20; i++) { - val = ioread32(base + USBHS_UGSTS_REG); - if ((val & USBHS_UGSTS_LOCK) == USBHS_UGSTS_LOCK) { - val = ioread32(base + USBHS_UGCTRL_REG); - val |= USBHS_UGCTRL_CONNECT; - iowrite32(val, base + USBHS_UGCTRL_REG); - return 0; - } - udelay(1); - } - - /* Timed out waiting for the PLL lock */ - return -ETIMEDOUT; -} - -/* Disable USBHS internal phy */ -static int __rcar_gen2_usbhs_phy_disable(void __iomem *base) -{ - u32 val; - - /* USBHS PHY power off */ - val = ioread32(base + USBHS_UGCTRL_REG); - val &= ~USBHS_UGCTRL_CONNECT; - iowrite32(val, base + USBHS_UGCTRL_REG); - - val = ioread16(base + USBHS_LPSTS_REG); - val &= ~USBHS_LPSTS_SUSPM; - iowrite16(val, base + USBHS_LPSTS_REG); - - val = ioread32(base + USBHS_UGCTRL_REG); - val |= USBHS_UGCTRL_PLLRESET; - iowrite32(val, base + USBHS_UGCTRL_REG); - return 0; -} - -/* Setup USB channels */ -static void __rcar_gen2_usb_phy_init(struct rcar_gen2_usb_phy_priv *priv) -{ - u32 val; - - clk_prepare_enable(priv->clk); - - /* Set USB channels in the USBHS UGCTRL2 register */ - val = ioread32(priv->base + USBHS_UGCTRL2_REG); - val &= ~(USBHS_UGCTRL2_USB0_HS | USBHS_UGCTRL2_USB2_SS); - val |= priv->ugctrl2; - iowrite32(val, priv->base + USBHS_UGCTRL2_REG); -} - -/* Shutdown USB channels */ -static void __rcar_gen2_usb_phy_shutdown(struct rcar_gen2_usb_phy_priv *priv) -{ - __rcar_gen2_usbhs_phy_disable(priv->base); - clk_disable_unprepare(priv->clk); -} - -static int rcar_gen2_usb_phy_set_suspend(struct usb_phy *phy, int suspend) -{ - struct rcar_gen2_usb_phy_priv *priv = usb_phy_to_priv(phy); - unsigned long flags; - int retval; - - spin_lock_irqsave(&priv->lock, flags); - retval = suspend ? __rcar_gen2_usbhs_phy_disable(priv->base) : - __rcar_gen2_usbhs_phy_enable(priv->base); - spin_unlock_irqrestore(&priv->lock, flags); - return retval; -} - -static int rcar_gen2_usb_phy_init(struct usb_phy *phy) -{ - struct rcar_gen2_usb_phy_priv *priv = usb_phy_to_priv(phy); - unsigned long flags; - - spin_lock_irqsave(&priv->lock, flags); - /* - * Enable the clock and setup USB channels - * if it's the first user - */ - if (!priv->usecount++) - __rcar_gen2_usb_phy_init(priv); - spin_unlock_irqrestore(&priv->lock, flags); - return 0; -} - -static void rcar_gen2_usb_phy_shutdown(struct usb_phy *phy) -{ - struct rcar_gen2_usb_phy_priv *priv = usb_phy_to_priv(phy); - unsigned long flags; - - spin_lock_irqsave(&priv->lock, flags); - if (!priv->usecount) { - dev_warn(phy->dev, "Trying to disable phy with 0 usecount\n"); - goto out; - } - - /* Disable everything if it's the last user */ - if (!--priv->usecount) - __rcar_gen2_usb_phy_shutdown(priv); -out: - spin_unlock_irqrestore(&priv->lock, flags); -} - -static int rcar_gen2_usb_phy_probe(struct platform_device *pdev) -{ - struct device *dev = &pdev->dev; - struct rcar_gen2_phy_platform_data *pdata; - struct rcar_gen2_usb_phy_priv *priv; - struct resource *res; - void __iomem *base; - struct clk *clk; - int retval; - - pdata = dev_get_platdata(dev); - if (!pdata) { - dev_err(dev, "No platform data\n"); - return -EINVAL; - } - - clk = devm_clk_get(dev, "usbhs"); - if (IS_ERR(clk)) { - dev_err(dev, "Can't get the clock\n"); - return PTR_ERR(clk); - } - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - base = devm_ioremap_resource(dev, res); - if (IS_ERR(base)) - return PTR_ERR(base); - - priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); - if (!priv) - return -ENOMEM; - - spin_lock_init(&priv->lock); - priv->clk = clk; - priv->base = base; - priv->ugctrl2 = pdata->chan0_pci ? - USBHS_UGCTRL2_USB0_PCI : USBHS_UGCTRL2_USB0_HS; - priv->ugctrl2 |= pdata->chan2_pci ? - USBHS_UGCTRL2_USB2_PCI : USBHS_UGCTRL2_USB2_SS; - priv->phy.dev = dev; - priv->phy.label = dev_name(dev); - priv->phy.init = rcar_gen2_usb_phy_init; - priv->phy.shutdown = rcar_gen2_usb_phy_shutdown; - priv->phy.set_suspend = rcar_gen2_usb_phy_set_suspend; - - retval = usb_add_phy_dev(&priv->phy); - if (retval < 0) { - dev_err(dev, "Failed to add USB phy\n"); - return retval; - } - - platform_set_drvdata(pdev, priv); - - return retval; -} - -static int rcar_gen2_usb_phy_remove(struct platform_device *pdev) -{ - struct rcar_gen2_usb_phy_priv *priv = platform_get_drvdata(pdev); - - usb_remove_phy(&priv->phy); - - return 0; -} - -static struct platform_driver rcar_gen2_usb_phy_driver = { - .driver = { - .name = "usb_phy_rcar_gen2", - }, - .probe = rcar_gen2_usb_phy_probe, - .remove = rcar_gen2_usb_phy_remove, -}; - -module_platform_driver(rcar_gen2_usb_phy_driver); - -MODULE_LICENSE("GPL v2"); -MODULE_DESCRIPTION("Renesas R-Car Gen2 USB phy"); -MODULE_AUTHOR("Valentine Barshak <valentine.barshak@cogentembedded.com>"); diff --git a/drivers/usb/phy/phy.c b/drivers/usb/phy/phy.c index d1cd6b50f520..98f75d2842b7 100644 --- a/drivers/usb/phy/phy.c +++ b/drivers/usb/phy/phy.c @@ -22,6 +22,11 @@ static LIST_HEAD(phy_list); static LIST_HEAD(phy_bind_list); static DEFINE_SPINLOCK(phy_lock); +struct phy_devm { + struct usb_phy *phy; + struct notifier_block *nb; +}; + static struct usb_phy *__usb_find_phy(struct list_head *list, enum usb_phy_type type) { @@ -79,6 +84,15 @@ static void devm_usb_phy_release(struct device *dev, void *res) usb_put_phy(phy); } +static void devm_usb_phy_release2(struct device *dev, void *_res) +{ + struct phy_devm *res = _res; + + if (res->nb) + usb_unregister_notifier(res->phy, res->nb); + usb_put_phy(res->phy); +} + static int devm_usb_phy_match(struct device *dev, void *res, void *match_data) { struct usb_phy **phy = res; @@ -153,40 +167,30 @@ err0: EXPORT_SYMBOL_GPL(usb_get_phy); /** - * devm_usb_get_phy_by_phandle - find the USB PHY by phandle + * devm_usb_get_phy_by_node - find the USB PHY by device_node * @dev - device that requests this phy - * @phandle - name of the property holding the phy phandle value - * @index - the index of the phy + * @node - the device_node for the phy device. + * @nb - a notifier_block to register with the phy. * - * Returns the phy driver associated with the given phandle value, + * Returns the phy driver associated with the given device_node, * after getting a refcount to it, -ENODEV if there is no such phy or - * -EPROBE_DEFER if there is a phandle to the phy, but the device is - * not yet loaded. While at that, it also associates the device with + * -EPROBE_DEFER if the device is not yet loaded. While at that, it + * also associates the device with * the phy using devres. On driver detach, release function is invoked * on the devres data, then, devres data is freed. * - * For use by USB host and peripheral drivers. + * For use by peripheral drivers for devices related to a phy, + * such as a charger. */ -struct usb_phy *devm_usb_get_phy_by_phandle(struct device *dev, - const char *phandle, u8 index) +struct usb_phy *devm_usb_get_phy_by_node(struct device *dev, + struct device_node *node, + struct notifier_block *nb) { - struct usb_phy *phy = ERR_PTR(-ENOMEM), **ptr; + struct usb_phy *phy = ERR_PTR(-ENOMEM); + struct phy_devm *ptr; unsigned long flags; - struct device_node *node; - if (!dev->of_node) { - dev_dbg(dev, "device does not have a device node entry\n"); - return ERR_PTR(-EINVAL); - } - - node = of_parse_phandle(dev->of_node, phandle, index); - if (!node) { - dev_dbg(dev, "failed to get %s phandle in %s node\n", phandle, - dev->of_node->full_name); - return ERR_PTR(-ENODEV); - } - - ptr = devres_alloc(devm_usb_phy_release, sizeof(*ptr), GFP_KERNEL); + ptr = devres_alloc(devm_usb_phy_release2, sizeof(*ptr), GFP_KERNEL); if (!ptr) { dev_dbg(dev, "failed to allocate memory for devres\n"); goto err0; @@ -205,8 +209,10 @@ struct usb_phy *devm_usb_get_phy_by_phandle(struct device *dev, devres_free(ptr); goto err1; } - - *ptr = phy; + if (nb) + usb_register_notifier(phy, nb); + ptr->phy = phy; + ptr->nb = nb; devres_add(dev, ptr); get_device(phy->dev); @@ -215,10 +221,47 @@ err1: spin_unlock_irqrestore(&phy_lock, flags); err0: - of_node_put(node); return phy; } +EXPORT_SYMBOL_GPL(devm_usb_get_phy_by_node); + +/** + * devm_usb_get_phy_by_phandle - find the USB PHY by phandle + * @dev - device that requests this phy + * @phandle - name of the property holding the phy phandle value + * @index - the index of the phy + * + * Returns the phy driver associated with the given phandle value, + * after getting a refcount to it, -ENODEV if there is no such phy or + * -EPROBE_DEFER if there is a phandle to the phy, but the device is + * not yet loaded. While at that, it also associates the device with + * the phy using devres. On driver detach, release function is invoked + * on the devres data, then, devres data is freed. + * + * For use by USB host and peripheral drivers. + */ +struct usb_phy *devm_usb_get_phy_by_phandle(struct device *dev, + const char *phandle, u8 index) +{ + struct device_node *node; + struct usb_phy *phy; + + if (!dev->of_node) { + dev_dbg(dev, "device does not have a device node entry\n"); + return ERR_PTR(-EINVAL); + } + + node = of_parse_phandle(dev->of_node, phandle, index); + if (!node) { + dev_dbg(dev, "failed to get %s phandle in %s node\n", phandle, + dev->of_node->full_name); + return ERR_PTR(-ENODEV); + } + phy = devm_usb_get_phy_by_node(dev, node, NULL); + of_node_put(node); + return phy; +} EXPORT_SYMBOL_GPL(devm_usb_get_phy_by_phandle); /** |