diff options
Diffstat (limited to 'drivers/usb/phy')
-rw-r--r-- | drivers/usb/phy/phy-msm-usb.c | 17 | ||||
-rw-r--r-- | drivers/usb/phy/phy-mv-usb.c | 4 | ||||
-rw-r--r-- | drivers/usb/phy/phy-qcom-8x16-usb.c | 9 | ||||
-rw-r--r-- | drivers/usb/phy/phy-tahvo.c | 2 | ||||
-rw-r--r-- | drivers/usb/phy/phy.c | 276 |
5 files changed, 288 insertions, 20 deletions
diff --git a/drivers/usb/phy/phy-msm-usb.c b/drivers/usb/phy/phy-msm-usb.c index 8fb86a5f458e..3d0dd2f97415 100644 --- a/drivers/usb/phy/phy-msm-usb.c +++ b/drivers/usb/phy/phy-msm-usb.c @@ -197,6 +197,7 @@ struct msm_otg { struct regulator *v3p3; struct regulator *v1p8; struct regulator *vddcx; + struct regulator_bulk_data supplies[3]; struct reset_control *phy_rst; struct reset_control *link_rst; @@ -1731,7 +1732,6 @@ static int msm_otg_reboot_notify(struct notifier_block *this, static int msm_otg_probe(struct platform_device *pdev) { - struct regulator_bulk_data regs[3]; int ret = 0; struct device_node *np = pdev->dev.of_node; struct msm_otg_platform_data *pdata; @@ -1817,17 +1817,18 @@ static int msm_otg_probe(struct platform_device *pdev) return motg->irq; } - regs[0].supply = "vddcx"; - regs[1].supply = "v3p3"; - regs[2].supply = "v1p8"; + motg->supplies[0].supply = "vddcx"; + motg->supplies[1].supply = "v3p3"; + motg->supplies[2].supply = "v1p8"; - ret = devm_regulator_bulk_get(motg->phy.dev, ARRAY_SIZE(regs), regs); + ret = devm_regulator_bulk_get(motg->phy.dev, ARRAY_SIZE(motg->supplies), + motg->supplies); if (ret) return ret; - motg->vddcx = regs[0].consumer; - motg->v3p3 = regs[1].consumer; - motg->v1p8 = regs[2].consumer; + motg->vddcx = motg->supplies[0].consumer; + motg->v3p3 = motg->supplies[1].consumer; + motg->v1p8 = motg->supplies[2].consumer; clk_set_rate(motg->clk, 60000000); diff --git a/drivers/usb/phy/phy-mv-usb.c b/drivers/usb/phy/phy-mv-usb.c index 697a741a0cb1..0e315694adc9 100644 --- a/drivers/usb/phy/phy-mv-usb.c +++ b/drivers/usb/phy/phy-mv-usb.c @@ -29,10 +29,8 @@ #include "phy-mv-usb.h" #define DRIVER_DESC "Marvell USB OTG transceiver driver" -#define DRIVER_VERSION "Jan 20, 2010" MODULE_DESCRIPTION(DRIVER_DESC); -MODULE_VERSION(DRIVER_VERSION); MODULE_LICENSE("GPL"); static const char driver_name[] = "mv-otg"; @@ -650,7 +648,7 @@ static struct attribute *inputs_attrs[] = { NULL, }; -static struct attribute_group inputs_attr_group = { +static const struct attribute_group inputs_attr_group = { .name = "inputs", .attrs = inputs_attrs, }; diff --git a/drivers/usb/phy/phy-qcom-8x16-usb.c b/drivers/usb/phy/phy-qcom-8x16-usb.c index b6a83a5cbad3..679afeaaa9a8 100644 --- a/drivers/usb/phy/phy-qcom-8x16-usb.c +++ b/drivers/usb/phy/phy-qcom-8x16-usb.c @@ -270,12 +270,9 @@ static int phy_8x16_probe(struct platform_device *pdev) platform_set_drvdata(pdev, qphy); res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) - return -EINVAL; - - qphy->regs = devm_ioremap(&pdev->dev, res->start, resource_size(res)); - if (!qphy->regs) - return -ENOMEM; + qphy->regs = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(qphy->regs)) + return PTR_ERR(qphy->regs); phy = &qphy->phy; phy->dev = &pdev->dev; diff --git a/drivers/usb/phy/phy-tahvo.c b/drivers/usb/phy/phy-tahvo.c index a31c8682e998..8babd318c0ed 100644 --- a/drivers/usb/phy/phy-tahvo.c +++ b/drivers/usb/phy/phy-tahvo.c @@ -326,7 +326,7 @@ static struct attribute *tahvo_attributes[] = { NULL }; -static struct attribute_group tahvo_attr_group = { +static const struct attribute_group tahvo_attr_group = { .attrs = tahvo_attributes, }; diff --git a/drivers/usb/phy/phy.c b/drivers/usb/phy/phy.c index 032f5afaad4b..89f4ac4cd93e 100644 --- a/drivers/usb/phy/phy.c +++ b/drivers/usb/phy/phy.c @@ -18,6 +18,18 @@ #include <linux/usb/phy.h> +/* Default current range by charger type. */ +#define DEFAULT_SDP_CUR_MIN 2 +#define DEFAULT_SDP_CUR_MAX 500 +#define DEFAULT_SDP_CUR_MIN_SS 150 +#define DEFAULT_SDP_CUR_MAX_SS 900 +#define DEFAULT_DCP_CUR_MIN 500 +#define DEFAULT_DCP_CUR_MAX 5000 +#define DEFAULT_CDP_CUR_MIN 1500 +#define DEFAULT_CDP_CUR_MAX 5000 +#define DEFAULT_ACA_CUR_MIN 1500 +#define DEFAULT_ACA_CUR_MAX 5000 + static LIST_HEAD(phy_list); static LIST_HEAD(phy_bind_list); static DEFINE_SPINLOCK(phy_lock); @@ -77,6 +89,221 @@ static struct usb_phy *__of_usb_find_phy(struct device_node *node) return ERR_PTR(-EPROBE_DEFER); } +static void usb_phy_set_default_current(struct usb_phy *usb_phy) +{ + usb_phy->chg_cur.sdp_min = DEFAULT_SDP_CUR_MIN; + usb_phy->chg_cur.sdp_max = DEFAULT_SDP_CUR_MAX; + usb_phy->chg_cur.dcp_min = DEFAULT_DCP_CUR_MIN; + usb_phy->chg_cur.dcp_max = DEFAULT_DCP_CUR_MAX; + usb_phy->chg_cur.cdp_min = DEFAULT_CDP_CUR_MIN; + usb_phy->chg_cur.cdp_max = DEFAULT_CDP_CUR_MAX; + usb_phy->chg_cur.aca_min = DEFAULT_ACA_CUR_MIN; + usb_phy->chg_cur.aca_max = DEFAULT_ACA_CUR_MAX; +} + +/** + * usb_phy_notify_charger_work - notify the USB charger state + * @work - the charger work to notify the USB charger state + * + * This work can be issued when USB charger state has been changed or + * USB charger current has been changed, then we can notify the current + * what can be drawn to power user and the charger state to userspace. + * + * If we get the charger type from extcon subsystem, we can notify the + * charger state to power user automatically by usb_phy_get_charger_type() + * issuing from extcon subsystem. + * + * If we get the charger type from ->charger_detect() instead of extcon + * subsystem, the usb phy driver should issue usb_phy_set_charger_state() + * to set charger state when the charger state has been changed. + */ +static void usb_phy_notify_charger_work(struct work_struct *work) +{ + struct usb_phy *usb_phy = container_of(work, struct usb_phy, chg_work); + char uchger_state[50] = { 0 }; + char *envp[] = { uchger_state, NULL }; + unsigned int min, max; + + switch (usb_phy->chg_state) { + case USB_CHARGER_PRESENT: + usb_phy_get_charger_current(usb_phy, &min, &max); + + atomic_notifier_call_chain(&usb_phy->notifier, max, usb_phy); + snprintf(uchger_state, ARRAY_SIZE(uchger_state), + "USB_CHARGER_STATE=%s", "USB_CHARGER_PRESENT"); + break; + case USB_CHARGER_ABSENT: + usb_phy_set_default_current(usb_phy); + + atomic_notifier_call_chain(&usb_phy->notifier, 0, usb_phy); + snprintf(uchger_state, ARRAY_SIZE(uchger_state), + "USB_CHARGER_STATE=%s", "USB_CHARGER_ABSENT"); + break; + default: + dev_warn(usb_phy->dev, "Unknown USB charger state: %d\n", + usb_phy->chg_state); + return; + } + + kobject_uevent_env(&usb_phy->dev->kobj, KOBJ_CHANGE, envp); +} + +static void __usb_phy_get_charger_type(struct usb_phy *usb_phy) +{ + if (extcon_get_state(usb_phy->edev, EXTCON_CHG_USB_SDP) > 0) { + usb_phy->chg_type = SDP_TYPE; + usb_phy->chg_state = USB_CHARGER_PRESENT; + } else if (extcon_get_state(usb_phy->edev, EXTCON_CHG_USB_CDP) > 0) { + usb_phy->chg_type = CDP_TYPE; + usb_phy->chg_state = USB_CHARGER_PRESENT; + } else if (extcon_get_state(usb_phy->edev, EXTCON_CHG_USB_DCP) > 0) { + usb_phy->chg_type = DCP_TYPE; + usb_phy->chg_state = USB_CHARGER_PRESENT; + } else if (extcon_get_state(usb_phy->edev, EXTCON_CHG_USB_ACA) > 0) { + usb_phy->chg_type = ACA_TYPE; + usb_phy->chg_state = USB_CHARGER_PRESENT; + } else { + usb_phy->chg_type = UNKNOWN_TYPE; + usb_phy->chg_state = USB_CHARGER_ABSENT; + } + + schedule_work(&usb_phy->chg_work); +} + +/** + * usb_phy_get_charger_type - get charger type from extcon subsystem + * @nb -the notifier block to determine charger type + * @state - the cable state + * @data - private data + * + * Determin the charger type from extcon subsystem which also means the + * charger state has been chaned, then we should notify this event. + */ +static int usb_phy_get_charger_type(struct notifier_block *nb, + unsigned long state, void *data) +{ + struct usb_phy *usb_phy = container_of(nb, struct usb_phy, type_nb); + + __usb_phy_get_charger_type(usb_phy); + return NOTIFY_OK; +} + +/** + * usb_phy_set_charger_current - set the USB charger current + * @usb_phy - the USB phy to be used + * @mA - the current need to be set + * + * Usually we only change the charger default current when USB finished the + * enumeration as one SDP charger. As one SDP charger, usb_phy_set_power() + * will issue this function to change charger current when after setting USB + * configuration, or suspend/resume USB. For other type charger, we should + * use the default charger current and we do not suggest to issue this function + * to change the charger current. + * + * When USB charger current has been changed, we need to notify the power users. + */ +void usb_phy_set_charger_current(struct usb_phy *usb_phy, unsigned int mA) +{ + switch (usb_phy->chg_type) { + case SDP_TYPE: + if (usb_phy->chg_cur.sdp_max == mA) + return; + + usb_phy->chg_cur.sdp_max = (mA > DEFAULT_SDP_CUR_MAX_SS) ? + DEFAULT_SDP_CUR_MAX_SS : mA; + break; + case DCP_TYPE: + if (usb_phy->chg_cur.dcp_max == mA) + return; + + usb_phy->chg_cur.dcp_max = (mA > DEFAULT_DCP_CUR_MAX) ? + DEFAULT_DCP_CUR_MAX : mA; + break; + case CDP_TYPE: + if (usb_phy->chg_cur.cdp_max == mA) + return; + + usb_phy->chg_cur.cdp_max = (mA > DEFAULT_CDP_CUR_MAX) ? + DEFAULT_CDP_CUR_MAX : mA; + break; + case ACA_TYPE: + if (usb_phy->chg_cur.aca_max == mA) + return; + + usb_phy->chg_cur.aca_max = (mA > DEFAULT_ACA_CUR_MAX) ? + DEFAULT_ACA_CUR_MAX : mA; + break; + default: + return; + } + + schedule_work(&usb_phy->chg_work); +} +EXPORT_SYMBOL_GPL(usb_phy_set_charger_current); + +/** + * usb_phy_get_charger_current - get the USB charger current + * @usb_phy - the USB phy to be used + * @min - the minimum current + * @max - the maximum current + * + * Usually we will notify the maximum current to power user, but for some + * special case, power user also need the minimum current value. Then the + * power user can issue this function to get the suitable current. + */ +void usb_phy_get_charger_current(struct usb_phy *usb_phy, + unsigned int *min, unsigned int *max) +{ + switch (usb_phy->chg_type) { + case SDP_TYPE: + *min = usb_phy->chg_cur.sdp_min; + *max = usb_phy->chg_cur.sdp_max; + break; + case DCP_TYPE: + *min = usb_phy->chg_cur.dcp_min; + *max = usb_phy->chg_cur.dcp_max; + break; + case CDP_TYPE: + *min = usb_phy->chg_cur.cdp_min; + *max = usb_phy->chg_cur.cdp_max; + break; + case ACA_TYPE: + *min = usb_phy->chg_cur.aca_min; + *max = usb_phy->chg_cur.aca_max; + break; + default: + *min = 0; + *max = 0; + break; + } +} +EXPORT_SYMBOL_GPL(usb_phy_get_charger_current); + +/** + * usb_phy_set_charger_state - set the USB charger state + * @usb_phy - the USB phy to be used + * @state - the new state need to be set for charger + * + * The usb phy driver can issue this function when the usb phy driver + * detected the charger state has been changed, in this case the charger + * type should be get from ->charger_detect(). + */ +void usb_phy_set_charger_state(struct usb_phy *usb_phy, + enum usb_charger_state state) +{ + if (usb_phy->chg_state == state || !usb_phy->charger_detect) + return; + + usb_phy->chg_state = state; + if (usb_phy->chg_state == USB_CHARGER_PRESENT) + usb_phy->chg_type = usb_phy->charger_detect(usb_phy); + else + usb_phy->chg_type = UNKNOWN_TYPE; + + schedule_work(&usb_phy->chg_work); +} +EXPORT_SYMBOL_GPL(usb_phy_set_charger_state); + static void devm_usb_phy_release(struct device *dev, void *res) { struct usb_phy *phy = *(struct usb_phy **)res; @@ -124,6 +351,44 @@ static int usb_add_extcon(struct usb_phy *x) "register VBUS notifier failed\n"); return ret; } + } else { + x->type_nb.notifier_call = usb_phy_get_charger_type; + + ret = devm_extcon_register_notifier(x->dev, x->edev, + EXTCON_CHG_USB_SDP, + &x->type_nb); + if (ret) { + dev_err(x->dev, + "register extcon USB SDP failed.\n"); + return ret; + } + + ret = devm_extcon_register_notifier(x->dev, x->edev, + EXTCON_CHG_USB_CDP, + &x->type_nb); + if (ret) { + dev_err(x->dev, + "register extcon USB CDP failed.\n"); + return ret; + } + + ret = devm_extcon_register_notifier(x->dev, x->edev, + EXTCON_CHG_USB_DCP, + &x->type_nb); + if (ret) { + dev_err(x->dev, + "register extcon USB DCP failed.\n"); + return ret; + } + + ret = devm_extcon_register_notifier(x->dev, x->edev, + EXTCON_CHG_USB_ACA, + &x->type_nb); + if (ret) { + dev_err(x->dev, + "register extcon USB ACA failed.\n"); + return ret; + } } if (x->id_nb.notifier_call) { @@ -145,6 +410,13 @@ static int usb_add_extcon(struct usb_phy *x) } } + usb_phy_set_default_current(x); + INIT_WORK(&x->chg_work, usb_phy_notify_charger_work); + x->chg_type = UNKNOWN_TYPE; + x->chg_state = USB_CHARGER_DEFAULT; + if (x->type_nb.notifier_call) + __usb_phy_get_charger_type(x); + return 0; } @@ -302,8 +574,8 @@ struct usb_phy *devm_usb_get_phy_by_phandle(struct device *dev, node = of_parse_phandle(dev->of_node, phandle, index); if (!node) { - dev_dbg(dev, "failed to get %s phandle in %s node\n", phandle, - dev->of_node->full_name); + dev_dbg(dev, "failed to get %s phandle in %pOF node\n", phandle, + dev->of_node); return ERR_PTR(-ENODEV); } phy = devm_usb_get_phy_by_node(dev, node, NULL); |