diff options
Diffstat (limited to 'drivers/usb/phy/phy-generic.c')
| -rw-r--r-- | drivers/usb/phy/phy-generic.c | 150 |
1 files changed, 110 insertions, 40 deletions
diff --git a/drivers/usb/phy/phy-generic.c b/drivers/usb/phy/phy-generic.c index f1b719b45a53..70be50b734b2 100644 --- a/drivers/usb/phy/phy-generic.c +++ b/drivers/usb/phy/phy-generic.c @@ -27,6 +27,7 @@ #include <linux/module.h> #include <linux/platform_device.h> #include <linux/dma-mapping.h> +#include <linux/usb/gadget.h> #include <linux/usb/otg.h> #include <linux/usb/usb_phy_generic.h> #include <linux/slab.h> @@ -39,6 +40,10 @@ #include "phy-generic.h" +#define VBUS_IRQ_FLAGS \ + (IRQF_SHARED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | \ + IRQF_ONESHOT) + struct platform_device *usb_phy_generic_register(void) { return platform_device_register_simple("usb_phy_generic", @@ -59,19 +64,79 @@ static int nop_set_suspend(struct usb_phy *x, int suspend) static void nop_reset_set(struct usb_phy_generic *nop, int asserted) { - int value; + if (!nop->gpiod_reset) + return; + + gpiod_direction_output(nop->gpiod_reset, !asserted); + usleep_range(10000, 20000); + gpiod_set_value(nop->gpiod_reset, asserted); +} + +/* interface to regulator framework */ +static void nop_set_vbus_draw(struct usb_phy_generic *nop, unsigned mA) +{ + struct regulator *vbus_draw = nop->vbus_draw; + int enabled; + int ret; - if (!gpio_is_valid(nop->gpio_reset)) + if (!vbus_draw) return; - value = asserted; - if (nop->reset_active_low) - value = !value; + enabled = nop->vbus_draw_enabled; + if (mA) { + regulator_set_current_limit(vbus_draw, 0, 1000 * mA); + if (!enabled) { + ret = regulator_enable(vbus_draw); + if (ret < 0) + return; + nop->vbus_draw_enabled = 1; + } + } else { + if (enabled) { + ret = regulator_disable(vbus_draw); + if (ret < 0) + return; + nop->vbus_draw_enabled = 0; + } + } + nop->mA = mA; +} + + +static irqreturn_t nop_gpio_vbus_thread(int irq, void *data) +{ + struct usb_phy_generic *nop = data; + struct usb_otg *otg = nop->phy.otg; + int vbus, status; + + vbus = gpiod_get_value(nop->gpiod_vbus); + if ((vbus ^ nop->vbus) == 0) + return IRQ_HANDLED; + nop->vbus = vbus; + + if (vbus) { + status = USB_EVENT_VBUS; + otg->state = OTG_STATE_B_PERIPHERAL; + nop->phy.last_event = status; + usb_gadget_vbus_connect(otg->gadget); + + /* drawing a "unit load" is *always* OK, except for OTG */ + nop_set_vbus_draw(nop, 100); + + atomic_notifier_call_chain(&nop->phy.notifier, status, + otg->gadget); + } else { + nop_set_vbus_draw(nop, 0); - gpio_set_value_cansleep(nop->gpio_reset, value); + usb_gadget_vbus_disconnect(otg->gadget); + status = USB_EVENT_NONE; + otg->state = OTG_STATE_B_IDLE; + nop->phy.last_event = status; - if (!asserted) - usleep_range(10000, 20000); + atomic_notifier_call_chain(&nop->phy.notifier, status, + otg->gadget); + } + return IRQ_HANDLED; } int usb_gen_phy_init(struct usb_phy *phy) @@ -143,36 +208,47 @@ int usb_phy_gen_create_phy(struct device *dev, struct usb_phy_generic *nop, struct usb_phy_generic_platform_data *pdata) { enum usb_phy_type type = USB_PHY_TYPE_USB2; - int err; + int err = 0; u32 clk_rate = 0; bool needs_vcc = false; - nop->reset_active_low = true; /* default behaviour */ - if (dev->of_node) { struct device_node *node = dev->of_node; - enum of_gpio_flags flags = 0; if (of_property_read_u32(node, "clock-frequency", &clk_rate)) clk_rate = 0; needs_vcc = of_property_read_bool(node, "vcc-supply"); - nop->gpio_reset = of_get_named_gpio_flags(node, "reset-gpios", - 0, &flags); - if (nop->gpio_reset == -EPROBE_DEFER) - return -EPROBE_DEFER; - - nop->reset_active_low = flags & OF_GPIO_ACTIVE_LOW; - + nop->gpiod_reset = devm_gpiod_get_optional(dev, "reset"); + err = PTR_ERR_OR_ZERO(nop->gpiod_reset); + if (!err) { + nop->gpiod_vbus = devm_gpiod_get_optional(dev, + "vbus-detect"); + err = PTR_ERR_OR_ZERO(nop->gpiod_vbus); + } } else if (pdata) { type = pdata->type; clk_rate = pdata->clk_rate; needs_vcc = pdata->needs_vcc; - nop->gpio_reset = pdata->gpio_reset; - } else { - nop->gpio_reset = -1; + if (gpio_is_valid(pdata->gpio_reset)) { + err = devm_gpio_request_one(dev, pdata->gpio_reset, 0, + dev_name(dev)); + if (!err) + nop->gpiod_reset = + gpio_to_desc(pdata->gpio_reset); + } + nop->gpiod_vbus = pdata->gpiod_vbus; + } + + if (err == -EPROBE_DEFER) + return -EPROBE_DEFER; + if (err) { + dev_err(dev, "Error requesting RESET or VBUS GPIO\n"); + return err; } + if (nop->gpiod_reset) + gpiod_direction_output(nop->gpiod_reset, 1); nop->phy.otg = devm_kzalloc(dev, sizeof(*nop->phy.otg), GFP_KERNEL); @@ -201,24 +277,6 @@ int usb_phy_gen_create_phy(struct device *dev, struct usb_phy_generic *nop, return -EPROBE_DEFER; } - if (gpio_is_valid(nop->gpio_reset)) { - unsigned long gpio_flags; - - /* Assert RESET */ - if (nop->reset_active_low) - gpio_flags = GPIOF_OUT_INIT_LOW; - else - gpio_flags = GPIOF_OUT_INIT_HIGH; - - err = devm_gpio_request_one(dev, nop->gpio_reset, - gpio_flags, dev_name(dev)); - if (err) { - dev_err(dev, "Error requesting RESET GPIO %d\n", - nop->gpio_reset); - return err; - } - } - nop->dev = dev; nop->phy.dev = nop->dev; nop->phy.label = "nop-xceiv"; @@ -247,6 +305,18 @@ static int usb_phy_generic_probe(struct platform_device *pdev) err = usb_phy_gen_create_phy(dev, nop, dev_get_platdata(&pdev->dev)); if (err) return err; + if (nop->gpiod_vbus) { + err = devm_request_threaded_irq(&pdev->dev, + gpiod_to_irq(nop->gpiod_vbus), + NULL, nop_gpio_vbus_thread, + VBUS_IRQ_FLAGS, "vbus_detect", + nop); + if (err) { + dev_err(&pdev->dev, "can't request irq %i, err: %d\n", + gpiod_to_irq(nop->gpiod_vbus), err); + return err; + } + } nop->phy.init = usb_gen_phy_init; nop->phy.shutdown = usb_gen_phy_shutdown; |