summaryrefslogtreecommitdiff
path: root/drivers/usb/otg/twl4030-usb.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/otg/twl4030-usb.c')
-rw-r--r--drivers/usb/otg/twl4030-usb.c46
1 files changed, 16 insertions, 30 deletions
diff --git a/drivers/usb/otg/twl4030-usb.c b/drivers/usb/otg/twl4030-usb.c
index 2be9f2fa41f9..223cdf46ccb7 100644
--- a/drivers/usb/otg/twl4030-usb.c
+++ b/drivers/usb/otg/twl4030-usb.c
@@ -36,7 +36,8 @@
#include <linux/i2c/twl.h>
#include <linux/regulator/consumer.h>
#include <linux/err.h>
-
+#include <linux/notifier.h>
+#include <linux/slab.h>
/* Register defines */
@@ -236,15 +237,6 @@
#define PMBR1 0x0D
#define GPIO_USB_4PIN_ULPI_2430C (3 << 0)
-
-
-enum linkstat {
- USB_LINK_UNKNOWN = 0,
- USB_LINK_NONE,
- USB_LINK_VBUS,
- USB_LINK_ID,
-};
-
struct twl4030_usb {
struct otg_transceiver otg;
struct device *dev;
@@ -347,10 +339,10 @@ twl4030_usb_clear_bits(struct twl4030_usb *twl, u8 reg, u8 bits)
/*-------------------------------------------------------------------------*/
-static enum linkstat twl4030_usb_linkstat(struct twl4030_usb *twl)
+static enum usb_xceiv_events twl4030_usb_linkstat(struct twl4030_usb *twl)
{
int status;
- int linkstat = USB_LINK_UNKNOWN;
+ int linkstat = USB_EVENT_NONE;
/*
* For ID/VBUS sensing, see manual section 15.4.8 ...
@@ -368,11 +360,11 @@ static enum linkstat twl4030_usb_linkstat(struct twl4030_usb *twl)
dev_err(twl->dev, "USB link status err %d\n", status);
else if (status & (BIT(7) | BIT(2))) {
if (status & BIT(2))
- linkstat = USB_LINK_ID;
+ linkstat = USB_EVENT_ID;
else
- linkstat = USB_LINK_VBUS;
+ linkstat = USB_EVENT_VBUS;
} else
- linkstat = USB_LINK_NONE;
+ linkstat = USB_EVENT_NONE;
dev_dbg(twl->dev, "HW_CONDITIONS 0x%02x/%d; link %d\n",
status, status, linkstat);
@@ -383,7 +375,7 @@ static enum linkstat twl4030_usb_linkstat(struct twl4030_usb *twl)
spin_lock_irq(&twl->lock);
twl->linkstat = linkstat;
- if (linkstat == USB_LINK_ID) {
+ if (linkstat == USB_EVENT_ID) {
twl->otg.default_a = true;
twl->otg.state = OTG_STATE_A_IDLE;
} else {
@@ -564,7 +556,7 @@ static ssize_t twl4030_usb_vbus_show(struct device *dev,
spin_lock_irqsave(&twl->lock, flags);
ret = sprintf(buf, "%s\n",
- (twl->linkstat == USB_LINK_VBUS) ? "on" : "off");
+ (twl->linkstat == USB_EVENT_VBUS) ? "on" : "off");
spin_unlock_irqrestore(&twl->lock, flags);
return ret;
@@ -576,17 +568,8 @@ static irqreturn_t twl4030_usb_irq(int irq, void *_twl)
struct twl4030_usb *twl = _twl;
int status;
-#ifdef CONFIG_LOCKDEP
- /* WORKAROUND for lockdep forcing IRQF_DISABLED on us, which
- * we don't want and can't tolerate. Although it might be
- * friendlier not to borrow this thread context...
- */
- local_irq_enable();
-#endif
-
status = twl4030_usb_linkstat(twl);
- if (status != USB_LINK_UNKNOWN) {
-
+ if (status >= 0) {
/* FIXME add a set_power() method so that B-devices can
* configure the charger appropriately. It's not always
* correct to consume VBUS power, and how much current to
@@ -598,12 +581,13 @@ static irqreturn_t twl4030_usb_irq(int irq, void *_twl)
* USB_LINK_VBUS state. musb_hdrc won't care until it
* starts to handle softconnect right.
*/
- if (status == USB_LINK_NONE)
+ if (status == USB_EVENT_NONE)
twl4030_phy_suspend(twl, 0);
else
twl4030_phy_resume(twl);
- twl4030charger_usb_en(status == USB_LINK_VBUS);
+ blocking_notifier_call_chain(&twl->otg.notifier, status,
+ twl->otg.gadget);
}
sysfs_notify(&twl->dev->kobj, NULL, "vbus");
@@ -693,6 +677,8 @@ static int __devinit twl4030_usb_probe(struct platform_device *pdev)
if (device_create_file(&pdev->dev, &dev_attr_vbus))
dev_warn(&pdev->dev, "could not create sysfs file\n");
+ BLOCKING_INIT_NOTIFIER_HEAD(&twl->otg.notifier);
+
/* Our job is to use irqs and status from the power module
* to keep the transceiver disabled when nothing's connected.
*
@@ -702,7 +688,7 @@ static int __devinit twl4030_usb_probe(struct platform_device *pdev)
* need both handles, otherwise just one suffices.
*/
twl->irq_enabled = true;
- status = request_irq(twl->irq, twl4030_usb_irq,
+ status = request_threaded_irq(twl->irq, NULL, twl4030_usb_irq,
IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
"twl4030_usb", twl);
if (status < 0) {