summaryrefslogtreecommitdiff
path: root/drivers/usb/musb
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/musb')
-rw-r--r--drivers/usb/musb/da8xx.c70
-rw-r--r--drivers/usb/musb/musb_core.c29
-rw-r--r--drivers/usb/musb/musb_core.h6
-rw-r--r--drivers/usb/musb/musb_gadget.c8
-rw-r--r--drivers/usb/musb/musb_host.c2
-rw-r--r--drivers/usb/musb/musb_virthub.c1
-rw-r--r--drivers/usb/musb/omap2430.c6
-rw-r--r--drivers/usb/musb/sunxi.c25
8 files changed, 113 insertions, 34 deletions
diff --git a/drivers/usb/musb/da8xx.c b/drivers/usb/musb/da8xx.c
index 2440f88e07a3..e89708d839e5 100644
--- a/drivers/usb/musb/da8xx.c
+++ b/drivers/usb/musb/da8xx.c
@@ -6,6 +6,9 @@
* Based on the DaVinci "glue layer" code.
* Copyright (C) 2005-2006 by Texas Instruments
*
+ * DT support
+ * Copyright (c) 2016 Petr Kulhavy <petr@barix.com>
+ *
* This file is part of the Inventra Controller Driver for Linux.
*
* The Inventra Controller Driver for Linux is free software; you
@@ -340,6 +343,13 @@ static int da8xx_musb_set_mode(struct musb *musb, u8 musb_mode)
struct da8xx_glue *glue = dev_get_drvdata(musb->controller->parent);
enum phy_mode phy_mode;
+ /*
+ * The PHY has some issues when it is forced in device or host mode.
+ * Unless the user request another mode, configure the PHY in OTG mode.
+ */
+ if (!musb->is_initialized)
+ return phy_set_mode(glue->phy, PHY_MODE_USB_OTG);
+
switch (musb_mode) {
case MUSB_HOST: /* Force VBUS valid, ID = 0 */
phy_mode = PHY_MODE_USB_HOST;
@@ -366,6 +376,12 @@ static int da8xx_musb_init(struct musb *musb)
musb->mregs += DA8XX_MENTOR_CORE_OFFSET;
+ ret = clk_prepare_enable(glue->clk);
+ if (ret) {
+ dev_err(glue->dev, "failed to enable clock\n");
+ return ret;
+ }
+
/* Returns zero if e.g. not clocked */
rev = musb_readl(reg_base, DA8XX_USB_REVISION_REG);
if (!rev)
@@ -377,12 +393,6 @@ static int da8xx_musb_init(struct musb *musb)
goto fail;
}
- ret = clk_prepare_enable(glue->clk);
- if (ret) {
- dev_err(glue->dev, "failed to enable clock\n");
- goto fail;
- }
-
setup_timer(&otg_workaround, otg_timer, (unsigned long)musb);
/* Reset the controller */
@@ -392,7 +402,7 @@ static int da8xx_musb_init(struct musb *musb)
ret = phy_init(glue->phy);
if (ret) {
dev_err(glue->dev, "Failed to init phy.\n");
- goto err_phy_init;
+ goto fail;
}
ret = phy_power_on(glue->phy);
@@ -412,9 +422,8 @@ static int da8xx_musb_init(struct musb *musb)
err_phy_power_on:
phy_exit(glue->phy);
-err_phy_init:
- clk_disable_unprepare(glue->clk);
fail:
+ clk_disable_unprepare(glue->clk);
return ret;
}
@@ -433,6 +442,21 @@ static int da8xx_musb_exit(struct musb *musb)
return 0;
}
+static inline u8 get_vbus_power(struct device *dev)
+{
+ struct regulator *vbus_supply;
+ int current_uA;
+
+ vbus_supply = regulator_get_optional(dev, "vbus");
+ if (IS_ERR(vbus_supply))
+ return 255;
+ current_uA = regulator_get_current_limit(vbus_supply);
+ regulator_put(vbus_supply);
+ if (current_uA <= 0 || current_uA > 510000)
+ return 255;
+ return current_uA / 1000 / 2;
+}
+
static const struct musb_platform_ops da8xx_ops = {
.quirks = MUSB_DMA_CPPI | MUSB_INDEXED_EP,
.init = da8xx_musb_init,
@@ -458,6 +482,12 @@ static const struct platform_device_info da8xx_dev_info = {
.dma_mask = DMA_BIT_MASK(32),
};
+static const struct musb_hdrc_config da8xx_config = {
+ .ram_bits = 10,
+ .num_eps = 5,
+ .multipoint = 1,
+};
+
static int da8xx_probe(struct platform_device *pdev)
{
struct resource musb_resources[2];
@@ -465,6 +495,7 @@ static int da8xx_probe(struct platform_device *pdev)
struct da8xx_glue *glue;
struct platform_device_info pinfo;
struct clk *clk;
+ struct device_node *np = pdev->dev.of_node;
int ret;
glue = devm_kzalloc(&pdev->dev, sizeof(*glue), GFP_KERNEL);
@@ -487,6 +518,16 @@ static int da8xx_probe(struct platform_device *pdev)
glue->dev = &pdev->dev;
glue->clk = clk;
+ if (IS_ENABLED(CONFIG_OF) && np) {
+ pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+ if (!pdata)
+ return -ENOMEM;
+
+ pdata->config = &da8xx_config;
+ pdata->mode = musb_get_mode(&pdev->dev);
+ pdata->power = get_vbus_power(&pdev->dev);
+ }
+
pdata->platform_ops = &da8xx_ops;
glue->usb_phy = usb_phy_generic_register();
@@ -537,11 +578,22 @@ static int da8xx_remove(struct platform_device *pdev)
return 0;
}
+#ifdef CONFIG_OF
+static const struct of_device_id da8xx_id_table[] = {
+ {
+ .compatible = "ti,da830-musb",
+ },
+ {},
+};
+MODULE_DEVICE_TABLE(of, da8xx_id_table);
+#endif
+
static struct platform_driver da8xx_driver = {
.probe = da8xx_probe,
.remove = da8xx_remove,
.driver = {
.name = "musb-da8xx",
+ .of_match_table = of_match_ptr(da8xx_id_table),
},
};
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index c3e172e15ec3..9e226468a13e 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -100,6 +100,7 @@
#include <linux/io.h>
#include <linux/dma-mapping.h>
#include <linux/usb.h>
+#include <linux/usb/of.h>
#include "musb_core.h"
#include "musb_trace.h"
@@ -130,6 +131,24 @@ static inline struct musb *dev_to_musb(struct device *dev)
return dev_get_drvdata(dev);
}
+enum musb_mode musb_get_mode(struct device *dev)
+{
+ enum usb_dr_mode mode;
+
+ mode = usb_get_dr_mode(dev);
+ switch (mode) {
+ case USB_DR_MODE_HOST:
+ return MUSB_HOST;
+ case USB_DR_MODE_PERIPHERAL:
+ return MUSB_PERIPHERAL;
+ case USB_DR_MODE_OTG:
+ case USB_DR_MODE_UNKNOWN:
+ default:
+ return MUSB_OTG;
+ }
+}
+EXPORT_SYMBOL_GPL(musb_get_mode);
+
/*-------------------------------------------------------------------------*/
#ifndef CONFIG_BLACKFIN
@@ -569,10 +588,7 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
if (devctl & MUSB_DEVCTL_HM) {
switch (musb->xceiv->otg->state) {
case OTG_STATE_A_SUSPEND:
- /* remote wakeup? later, GetPortStatus
- * will stop RESUME signaling
- */
-
+ /* remote wakeup? */
musb->port1_status |=
(USB_PORT_STAT_C_SUSPEND << 16)
| MUSB_PORT_STAT_RESUME;
@@ -2414,8 +2430,9 @@ fail2:
musb_platform_exit(musb);
fail1:
- dev_err(musb->controller,
- "musb_init_controller failed with status %d\n", status);
+ if (status != -EPROBE_DEFER)
+ dev_err(musb->controller,
+ "%s failed with status %d\n", __func__, status);
musb_free(musb);
diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
index 91817d77d59c..a611e2f67bdc 100644
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -626,4 +626,10 @@ static inline void musb_platform_post_root_reset_end(struct musb *musb)
musb->ops->post_root_reset_end(musb);
}
+/*
+ * gets the "dr_mode" property from DT and converts it into musb_mode
+ * if the property is not found or not recognized returns MUSB_OTG
+ */
+extern enum musb_mode musb_get_mode(struct device *dev);
+
#endif /* __MUSB_CORE_H__ */
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index a55173c9e564..1acc4864f9f6 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -974,8 +974,8 @@ static int musb_gadget_enable(struct usb_ep *ep,
goto fail;
/* REVISIT this rules out high bandwidth periodic transfers */
- tmp = usb_endpoint_maxp(desc);
- if (tmp & ~0x07ff) {
+ tmp = usb_endpoint_maxp_mult(desc) - 1;
+ if (tmp) {
int ok;
if (usb_endpoint_dir_in(desc))
@@ -987,12 +987,12 @@ static int musb_gadget_enable(struct usb_ep *ep,
musb_dbg(musb, "no support for high bandwidth ISO");
goto fail;
}
- musb_ep->hb_mult = (tmp >> 11) & 3;
+ musb_ep->hb_mult = tmp;
} else {
musb_ep->hb_mult = 0;
}
- musb_ep->packet_sz = tmp & 0x7ff;
+ musb_ep->packet_sz = usb_endpoint_maxp(desc);
tmp = musb_ep->packet_sz * (musb_ep->hb_mult + 1);
/* enable the interrupts for the endpoint, set the endpoint
diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index 53bc4ceefe89..f6cdbad00dac 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -2237,7 +2237,7 @@ static int musb_urb_enqueue(
* Some musb cores don't support high bandwidth ISO transfers; and
* we don't (yet!) support high bandwidth interrupt transfers.
*/
- qh->hb_mult = 1 + ((qh->maxpacket >> 11) & 0x03);
+ qh->hb_mult = usb_endpoint_maxp_mult(epd);
if (qh->hb_mult > 1) {
int ok = (qh->type == USB_ENDPOINT_XFER_ISOC);
diff --git a/drivers/usb/musb/musb_virthub.c b/drivers/usb/musb/musb_virthub.c
index 61b5f1c3c5bc..0b4595439d51 100644
--- a/drivers/usb/musb/musb_virthub.c
+++ b/drivers/usb/musb/musb_virthub.c
@@ -132,7 +132,6 @@ void musb_port_suspend(struct musb *musb, bool do_suspend)
musb_dbg(musb, "Root port resuming, power %02x", power);
- /* later, GetPortStatus will stop RESUME signaling */
musb->port1_status |= MUSB_PORT_STAT_RESUME;
schedule_delayed_work(&musb->finish_resume_work,
msecs_to_jiffies(USB_RESUME_TIMEOUT));
diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
index e8be8e39ab8f..8b73214a9ea3 100644
--- a/drivers/usb/musb/omap2430.c
+++ b/drivers/usb/musb/omap2430.c
@@ -277,12 +277,12 @@ static int omap2430_musb_init(struct musb *musb)
if (status == -ENXIO)
return status;
- pr_err("HS USB OTG: no transceiver configured\n");
+ dev_dbg(dev, "HS USB OTG: no transceiver configured\n");
return -EPROBE_DEFER;
}
if (IS_ERR(musb->phy)) {
- pr_err("HS USB OTG: no PHY configured\n");
+ dev_err(dev, "HS USB OTG: no PHY configured\n");
return PTR_ERR(musb->phy);
}
musb->isr = omap2430_musb_interrupt;
@@ -301,7 +301,7 @@ static int omap2430_musb_init(struct musb *musb)
musb_writel(musb->mregs, OTG_INTERFSEL, l);
- pr_debug("HS USB OTG: revision 0x%x, sysconfig 0x%02x, "
+ dev_dbg(dev, "HS USB OTG: revision 0x%x, sysconfig 0x%02x, "
"sysstatus 0x%x, intrfsel 0x%x, simenable 0x%x\n",
musb_readl(musb->mregs, OTG_REVISION),
musb_readl(musb->mregs, OTG_SYSCONFIG),
diff --git a/drivers/usb/musb/sunxi.c b/drivers/usb/musb/sunxi.c
index 1408245be18e..d0be0eadd0d9 100644
--- a/drivers/usb/musb/sunxi.c
+++ b/drivers/usb/musb/sunxi.c
@@ -186,16 +186,6 @@ static irqreturn_t sunxi_musb_interrupt(int irq, void *__hci)
if (musb->int_usb)
writeb(musb->int_usb, musb->mregs + SUNXI_MUSB_INTRUSB);
- /*
- * sunxi musb often signals babble on low / full speed device
- * disconnect, without ever raising MUSB_INTR_DISCONNECT, since
- * normally babble never happens treat it as disconnect.
- */
- if ((musb->int_usb & MUSB_INTR_BABBLE) && is_host_active(musb)) {
- musb->int_usb &= ~MUSB_INTR_BABBLE;
- musb->int_usb |= MUSB_INTR_DISCONNECT;
- }
-
if ((musb->int_usb & MUSB_INTR_RESET) && !is_host_active(musb)) {
/* ep0 FADDR must be 0 when (re)entering peripheral mode */
musb_ep_select(musb->mregs, 0);
@@ -390,6 +380,20 @@ static int sunxi_musb_set_mode(struct musb *musb, u8 mode)
return 0;
}
+static int sunxi_musb_recover(struct musb *musb)
+{
+ struct sunxi_glue *glue = dev_get_drvdata(musb->controller->parent);
+
+ /*
+ * Schedule a phy_set_mode with the current glue->phy_mode value,
+ * this will force end the current session.
+ */
+ set_bit(SUNXI_MUSB_FL_PHY_MODE_PEND, &glue->flags);
+ schedule_work(&glue->work);
+
+ return 0;
+}
+
/*
* sunxi musb register layout
* 0x00 - 0x17 fifo regs, 1 long per fifo
@@ -618,6 +622,7 @@ static const struct musb_platform_ops sunxi_musb_ops = {
.dma_init = sunxi_musb_dma_controller_create,
.dma_exit = sunxi_musb_dma_controller_destroy,
.set_mode = sunxi_musb_set_mode,
+ .recover = sunxi_musb_recover,
.set_vbus = sunxi_musb_set_vbus,
.pre_root_reset_end = sunxi_musb_pre_root_reset_end,
.post_root_reset_end = sunxi_musb_post_root_reset_end,
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-17 07:21:52 +0300