10 files changed, 459 insertions, 386 deletions

diff --git a/drivers/usb/misc/Kconfig b/drivers/usb/misc/Kconfig
index a51e7d6afda9..e2b21c1d9c40 100644
--- a/drivers/usb/misc/Kconfig
+++ b/drivers/usb/misc/Kconfig
@@ -200,6 +200,19 @@ config USB_TEST
 	  See <http://www.linux-usb.org/usbtest/> for more information,
 	  including sample test device firmware and "how to use it".
 
+config USB_EHSET_TEST_FIXTURE
+        tristate "USB EHSET Test Fixture driver"
+        help
+	  Say Y here if you want to support the special test fixture device
+	  used for the USB-IF Embedded Host High-Speed Electrical Test procedure.
+
+	  When the test fixture is connected, it can enumerate as one of several
+	  VID/PID pairs. This driver then initiates a corresponding test mode on
+	  the downstream port to which the test fixture is attached.
+
+	  See <http://www.usb.org/developers/onthego/EHSET_v1.01.pdf> for more
+	  information.
+
 config USB_ISIGHTFW
 	tristate "iSight firmware loading support"
 	select FW_LOADER
@@ -233,5 +246,6 @@ config USB_EZUSB_FX2
 config USB_HSIC_USB3503
        tristate "USB3503 HSIC to USB20 Driver"
        depends on I2C
+       select REGMAP
        help
          This option enables support for SMSC USB3503 HSIC to USB 2.0 Driver.
diff --git a/drivers/usb/misc/Makefile b/drivers/usb/misc/Makefile
index 3e1bd70b06ea..e748fd5dbe94 100644
--- a/drivers/usb/misc/Makefile
+++ b/drivers/usb/misc/Makefile
@@ -2,9 +2,6 @@
 # Makefile for the rest of the USB drivers
 # (the ones that don't fit into any other categories)
 #
-
-ccflags-$(CONFIG_USB_DEBUG) := -DDEBUG
-
 obj-$(CONFIG_USB_ADUTUX)		+= adutux.o
 obj-$(CONFIG_USB_APPLEDISPLAY)		+= appledisplay.o
 obj-$(CONFIG_USB_CYPRESS_CY7C63)	+= cypress_cy7c63.o
@@ -22,6 +19,7 @@ obj-$(CONFIG_USB_LED)			+= usbled.o
 obj-$(CONFIG_USB_LEGOTOWER)		+= legousbtower.o
 obj-$(CONFIG_USB_RIO500)		+= rio500.o
 obj-$(CONFIG_USB_TEST)			+= usbtest.o
+obj-$(CONFIG_USB_EHSET_TEST_FIXTURE)    += ehset.o
 obj-$(CONFIG_USB_TRANCEVIBRATOR)	+= trancevibrator.o
 obj-$(CONFIG_USB_USS720)		+= uss720.o
 obj-$(CONFIG_USB_SEVSEG)		+= usbsevseg.o
diff --git a/drivers/usb/misc/adutux.c b/drivers/usb/misc/adutux.c
index eb3c8c142fa9..3eaa83f05086 100644
--- a/drivers/usb/misc/adutux.c
+++ b/drivers/usb/misc/adutux.c
@@ -18,6 +18,8 @@
  *
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/kernel.h>
 #include <linux/errno.h>
 #include <linux/init.h>
@@ -27,30 +29,11 @@
 #include <linux/mutex.h>
 #include <linux/uaccess.h>
 
-#ifdef CONFIG_USB_DEBUG
-static int debug = 5;
-#else
-static int debug = 1;
-#endif
-
-/* Use our own dbg macro */
-#undef dbg
-#define dbg(lvl, format, arg...)	\
-do {								\
-	if (debug >= lvl)						\
-		printk(KERN_DEBUG "%s: " format "\n", __FILE__, ##arg);	\
-} while (0)
-
-
 /* Version Information */
 #define DRIVER_VERSION "v0.0.13"
 #define DRIVER_AUTHOR "John Homppi"
 #define DRIVER_DESC "adutux (see www.ontrak.net)"
 
-/* Module parameters */
-module_param(debug, int, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(debug, "Debug enabled or not");
-
 /* Define these values to match your device */
 #define ADU_VENDOR_ID 0x0a07
 #define ADU_PRODUCT_ID 0x0064
@@ -124,19 +107,11 @@ static DEFINE_MUTEX(adutux_mutex);
 
 static struct usb_driver adu_driver;
 
-static void adu_debug_data(int level, const char *function, int size,
-			   const unsigned char *data)
+static inline void adu_debug_data(struct device *dev, const char *function,
+				  int size, const unsigned char *data)
 {
-	int i;
-
-	if (debug < level)
-		return;
-
-	printk(KERN_DEBUG "%s: %s - length = %d, data = ",
-	       __FILE__, function, size);
-	for (i = 0; i < size; ++i)
-		printk("%.2x ", data[i]);
-	printk("\n");
+	dev_dbg(dev, "%s - length = %d, data = %*ph\n",
+		function, size, size, data);
 }
 
 /**
@@ -147,12 +122,8 @@ static void adu_abort_transfers(struct adu_device *dev)
 {
 	unsigned long flags;
 
-	dbg(2, " %s : enter", __func__);
-
-	if (dev->udev == NULL) {
-		dbg(1, " %s : udev is null", __func__);
-		goto exit;
-	}
+	if (dev->udev == NULL)
+		return;
 
 	/* shutdown transfer */
 
@@ -170,15 +141,10 @@ static void adu_abort_transfers(struct adu_device *dev)
 		usb_kill_urb(dev->interrupt_out_urb);
 	} else
 		spin_unlock_irqrestore(&dev->buflock, flags);
-
-exit:
-	dbg(2, " %s : leave", __func__);
 }
 
 static void adu_delete(struct adu_device *dev)
 {
-	dbg(2, "%s enter", __func__);
-
 	/* free data structures */
 	usb_free_urb(dev->interrupt_in_urb);
 	usb_free_urb(dev->interrupt_out_urb);
@@ -187,8 +153,6 @@ static void adu_delete(struct adu_device *dev)
 	kfree(dev->interrupt_in_buffer);
 	kfree(dev->interrupt_out_buffer);
 	kfree(dev);
-
-	dbg(2, "%s : leave", __func__);
 }
 
 static void adu_interrupt_in_callback(struct urb *urb)
@@ -196,17 +160,17 @@ static void adu_interrupt_in_callback(struct urb *urb)
 	struct adu_device *dev = urb->context;
 	int status = urb->status;
 
-	dbg(4, " %s : enter, status %d", __func__, status);
-	adu_debug_data(5, __func__, urb->actual_length,
-		       urb->transfer_buffer);
+	adu_debug_data(&dev->udev->dev, __func__,
+		       urb->actual_length, urb->transfer_buffer);
 
 	spin_lock(&dev->buflock);
 
 	if (status != 0) {
 		if ((status != -ENOENT) && (status != -ECONNRESET) &&
 			(status != -ESHUTDOWN)) {
-			dbg(1, " %s : nonzero status received: %d",
-			    __func__, status);
+			dev_dbg(&dev->udev->dev,
+				"%s : nonzero status received: %d\n",
+				__func__, status);
 		}
 		goto exit;
 	}
@@ -220,10 +184,11 @@ static void adu_interrupt_in_callback(struct urb *urb)
 				dev->interrupt_in_buffer, urb->actual_length);
 
 			dev->read_buffer_length += urb->actual_length;
-			dbg(2, " %s reading  %d ", __func__,
-			    urb->actual_length);
+			dev_dbg(&dev->udev->dev,"%s reading  %d\n", __func__,
+				urb->actual_length);
 		} else {
-			dbg(1, " %s : read_buffer overflow", __func__);
+			dev_dbg(&dev->udev->dev,"%s : read_buffer overflow\n",
+				__func__);
 		}
 	}
 
@@ -232,9 +197,6 @@ exit:
 	spin_unlock(&dev->buflock);
 	/* always wake up so we recover from errors */
 	wake_up_interruptible(&dev->read_wait);
-	adu_debug_data(5, __func__, urb->actual_length,
-		       urb->transfer_buffer);
-	dbg(4, " %s : leave, status %d", __func__, status);
 }
 
 static void adu_interrupt_out_callback(struct urb *urb)
@@ -242,27 +204,23 @@ static void adu_interrupt_out_callback(struct urb *urb)
 	struct adu_device *dev = urb->context;
 	int status = urb->status;
 
-	dbg(4, " %s : enter, status %d", __func__, status);
-	adu_debug_data(5, __func__, urb->actual_length, urb->transfer_buffer);
+	adu_debug_data(&dev->udev->dev, __func__,
+		       urb->actual_length, urb->transfer_buffer);
 
 	if (status != 0) {
 		if ((status != -ENOENT) &&
 		    (status != -ECONNRESET)) {
-			dbg(1, " %s :nonzero status received: %d",
-			    __func__, status);
+			dev_dbg(&dev->udev->dev,
+				"%s :nonzero status received: %d\n", __func__,
+				status);
 		}
-		goto exit;
+		return;
 	}
 
 	spin_lock(&dev->buflock);
 	dev->out_urb_finished = 1;
 	wake_up(&dev->write_wait);
 	spin_unlock(&dev->buflock);
-exit:
-
-	adu_debug_data(5, __func__, urb->actual_length,
-		       urb->transfer_buffer);
-	dbg(4, " %s : leave, status %d", __func__, status);
 }
 
 static int adu_open(struct inode *inode, struct file *file)
@@ -272,20 +230,16 @@ static int adu_open(struct inode *inode, struct file *file)
 	int subminor;
 	int retval;
 
-	dbg(2, "%s : enter", __func__);
-
 	subminor = iminor(inode);
 
 	retval = mutex_lock_interruptible(&adutux_mutex);
-	if (retval) {
-		dbg(2, "%s : mutex lock failed", __func__);
+	if (retval)
 		goto exit_no_lock;
-	}
 
 	interface = usb_find_interface(&adu_driver, subminor);
 	if (!interface) {
-		printk(KERN_ERR "adutux: %s - error, can't find device for "
-		       "minor %d\n", __func__, subminor);
+		pr_err("%s - error, can't find device for minor %d\n",
+		       __func__, subminor);
 		retval = -ENODEV;
 		goto exit_no_device;
 	}
@@ -303,7 +257,8 @@ static int adu_open(struct inode *inode, struct file *file)
 	}
 
 	++dev->open_count;
-	dbg(2, "%s : open count %d", __func__, dev->open_count);
+	dev_dbg(&dev->udev->dev, "%s: open count %d\n", __func__,
+		dev->open_count);
 
 	/* save device in the file's private structure */
 	file->private_data = dev;
@@ -333,23 +288,19 @@ static int adu_open(struct inode *inode, struct file *file)
 exit_no_device:
 	mutex_unlock(&adutux_mutex);
 exit_no_lock:
-	dbg(2, "%s : leave, return value %d ", __func__, retval);
 	return retval;
 }
 
 static void adu_release_internal(struct adu_device *dev)
 {
-	dbg(2, " %s : enter", __func__);
-
 	/* decrement our usage count for the device */
 	--dev->open_count;
-	dbg(2, " %s : open count %d", __func__, dev->open_count);
+	dev_dbg(&dev->udev->dev, "%s : open count %d\n", __func__,
+		dev->open_count);
 	if (dev->open_count <= 0) {
 		adu_abort_transfers(dev);
 		dev->open_count = 0;
 	}
-
-	dbg(2, " %s : leave", __func__);
 }
 
 static int adu_release(struct inode *inode, struct file *file)
@@ -357,17 +308,13 @@ static int adu_release(struct inode *inode, struct file *file)
 	struct adu_device *dev;
 	int retval = 0;
 
-	dbg(2, " %s : enter", __func__);
-
 	if (file == NULL) {
-		dbg(1, " %s : file is NULL", __func__);
 		retval = -ENODEV;
 		goto exit;
 	}
 
 	dev = file->private_data;
 	if (dev == NULL) {
-		dbg(1, " %s : object is NULL", __func__);
 		retval = -ENODEV;
 		goto exit;
 	}
@@ -375,7 +322,7 @@ static int adu_release(struct inode *inode, struct file *file)
 	mutex_lock(&adutux_mutex); /* not interruptible */
 
 	if (dev->open_count <= 0) {
-		dbg(1, " %s : device not opened", __func__);
+		dev_dbg(&dev->udev->dev, "%s : device not opened\n", __func__);
 		retval = -ENODEV;
 		goto unlock;
 	}
@@ -389,7 +336,6 @@ static int adu_release(struct inode *inode, struct file *file)
 unlock:
 	mutex_unlock(&adutux_mutex);
 exit:
-	dbg(2, " %s : leave, return value %d", __func__, retval);
 	return retval;
 }
 
@@ -406,35 +352,32 @@ static ssize_t adu_read(struct file *file, __user char *buffer, size_t count,
 	unsigned long flags;
 	DECLARE_WAITQUEUE(wait, current);
 
-	dbg(2, " %s : enter, count = %Zd, file=%p", __func__, count, file);
-
 	dev = file->private_data;
-	dbg(2, " %s : dev=%p", __func__, dev);
-
 	if (mutex_lock_interruptible(&dev->mtx))
 		return -ERESTARTSYS;
 
 	/* verify that the device wasn't unplugged */
 	if (dev->udev == NULL) {
 		retval = -ENODEV;
-		printk(KERN_ERR "adutux: No device or device unplugged %d\n",
-		       retval);
+		pr_err("No device or device unplugged %d\n", retval);
 		goto exit;
 	}
 
 	/* verify that some data was requested */
 	if (count == 0) {
-		dbg(1, " %s : read request of 0 bytes", __func__);
+		dev_dbg(&dev->udev->dev, "%s : read request of 0 bytes\n",
+			__func__);
 		goto exit;
 	}
 
 	timeout = COMMAND_TIMEOUT;
-	dbg(2, " %s : about to start looping", __func__);
+	dev_dbg(&dev->udev->dev, "%s : about to start looping\n", __func__);
 	while (bytes_to_read) {
 		int data_in_secondary = dev->secondary_tail - dev->secondary_head;
-		dbg(2, " %s : while, data_in_secondary=%d, status=%d",
-		    __func__, data_in_secondary,
-		    dev->interrupt_in_urb->status);
+		dev_dbg(&dev->udev->dev,
+			"%s : while, data_in_secondary=%d, status=%d\n",
+			__func__, data_in_secondary,
+			dev->interrupt_in_urb->status);
 
 		if (data_in_secondary) {
 			/* drain secondary buffer */
@@ -457,8 +400,9 @@ static ssize_t adu_read(struct file *file, __user char *buffer, size_t count,
 			if (dev->read_buffer_length) {
 				/* we secure access to the primary */
 				char *tmp;
-				dbg(2, " %s : swap, read_buffer_length = %d",
-				    __func__, dev->read_buffer_length);
+				dev_dbg(&dev->udev->dev,
+					"%s : swap, read_buffer_length = %d\n",
+					__func__, dev->read_buffer_length);
 				tmp = dev->read_buffer_secondary;
 				dev->read_buffer_secondary = dev->read_buffer_primary;
 				dev->read_buffer_primary = tmp;
@@ -473,10 +417,14 @@ static ssize_t adu_read(struct file *file, __user char *buffer, size_t count,
 				if (!dev->read_urb_finished) {
 					/* somebody is doing IO */
 					spin_unlock_irqrestore(&dev->buflock, flags);
-					dbg(2, " %s : submitted already", __func__);
+					dev_dbg(&dev->udev->dev,
+						"%s : submitted already\n",
+						__func__);
 				} else {
 					/* we must initiate input */
-					dbg(2, " %s : initiate input", __func__);
+					dev_dbg(&dev->udev->dev,
+						"%s : initiate input\n",
+						__func__);
 					dev->read_urb_finished = 0;
 					spin_unlock_irqrestore(&dev->buflock, flags);
 
@@ -494,7 +442,9 @@ static ssize_t adu_read(struct file *file, __user char *buffer, size_t count,
 						if (retval == -ENOMEM) {
 							retval = bytes_read ? bytes_read : -ENOMEM;
 						}
-						dbg(2, " %s : submit failed", __func__);
+						dev_dbg(&dev->udev->dev,
+							"%s : submit failed\n",
+							__func__);
 						goto exit;
 					}
 				}
@@ -513,13 +463,16 @@ static ssize_t adu_read(struct file *file, __user char *buffer, size_t count,
 				remove_wait_queue(&dev->read_wait, &wait);
 
 				if (timeout <= 0) {
-					dbg(2, " %s : timeout", __func__);
+					dev_dbg(&dev->udev->dev,
+						"%s : timeout\n", __func__);
 					retval = bytes_read ? bytes_read : -ETIMEDOUT;
 					goto exit;
 				}
 
 				if (signal_pending(current)) {
-					dbg(2, " %s : signal pending", __func__);
+					dev_dbg(&dev->udev->dev,
+						"%s : signal pending\n",
+						__func__);
 					retval = bytes_read ? bytes_read : -EINTR;
 					goto exit;
 				}
@@ -552,7 +505,6 @@ exit:
 	/* unlock the device */
 	mutex_unlock(&dev->mtx);
 
-	dbg(2, " %s : leave, return value %d", __func__, retval);
 	return retval;
 }
 
@@ -567,8 +519,6 @@ static ssize_t adu_write(struct file *file, const __user char *buffer,
 	unsigned long flags;
 	int retval;
 
-	dbg(2, " %s : enter, count = %Zd", __func__, count);
-
 	dev = file->private_data;
 
 	retval = mutex_lock_interruptible(&dev->mtx);
@@ -578,14 +528,14 @@ static ssize_t adu_write(struct file *file, const __user char *buffer,
 	/* verify that the device wasn't unplugged */
 	if (dev->udev == NULL) {
 		retval = -ENODEV;
-		printk(KERN_ERR "adutux: No device or device unplugged %d\n",
-		       retval);
+		pr_err("No device or device unplugged %d\n", retval);
 		goto exit;
 	}
 
 	/* verify that we actually have some data to write */
 	if (count == 0) {
-		dbg(1, " %s : write request of 0 bytes", __func__);
+		dev_dbg(&dev->udev->dev, "%s : write request of 0 bytes\n",
+			__func__);
 		goto exit;
 	}
 
@@ -598,13 +548,15 @@ static ssize_t adu_write(struct file *file, const __user char *buffer,
 
 			mutex_unlock(&dev->mtx);
 			if (signal_pending(current)) {
-				dbg(1, " %s : interrupted", __func__);
+				dev_dbg(&dev->udev->dev, "%s : interrupted\n",
+					__func__);
 				set_current_state(TASK_RUNNING);
 				retval = -EINTR;
 				goto exit_onqueue;
 			}
 			if (schedule_timeout(COMMAND_TIMEOUT) == 0) {
-				dbg(1, "%s - command timed out.", __func__);
+				dev_dbg(&dev->udev->dev,
+					"%s - command timed out.\n", __func__);
 				retval = -ETIMEDOUT;
 				goto exit_onqueue;
 			}
@@ -615,18 +567,22 @@ static ssize_t adu_write(struct file *file, const __user char *buffer,
 				goto exit_nolock;
 			}
 
-			dbg(4, " %s : in progress, count = %Zd", __func__, count);
+			dev_dbg(&dev->udev->dev,
+				"%s : in progress, count = %Zd\n",
+				__func__, count);
 		} else {
 			spin_unlock_irqrestore(&dev->buflock, flags);
 			set_current_state(TASK_RUNNING);
 			remove_wait_queue(&dev->write_wait, &waita);
-			dbg(4, " %s : sending, count = %Zd", __func__, count);
+			dev_dbg(&dev->udev->dev, "%s : sending, count = %Zd\n",
+				__func__, count);
 
 			/* write the data into interrupt_out_buffer from userspace */
 			buffer_size = usb_endpoint_maxp(dev->interrupt_out_endpoint);
 			bytes_to_write = count > buffer_size ? buffer_size : count;
-			dbg(4, " %s : buffer_size = %Zd, count = %Zd, bytes_to_write = %Zd",
-			    __func__, buffer_size, count, bytes_to_write);
+			dev_dbg(&dev->udev->dev,
+				"%s : buffer_size = %Zd, count = %Zd, bytes_to_write = %Zd\n",
+				__func__, buffer_size, count, bytes_to_write);
 
 			if (copy_from_user(dev->interrupt_out_buffer, buffer, bytes_to_write) != 0) {
 				retval = -EFAULT;
@@ -665,7 +621,6 @@ static ssize_t adu_write(struct file *file, const __user char *buffer,
 exit:
 	mutex_unlock(&dev->mtx);
 exit_nolock:
-	dbg(2, " %s : leave, return value %d", __func__, retval);
 	return retval;
 
 exit_onqueue:
@@ -711,8 +666,6 @@ static int adu_probe(struct usb_interface *interface,
 	int out_end_size;
 	int i;
 
-	dbg(2, " %s : enter", __func__);
-
 	if (udev == NULL) {
 		dev_err(&interface->dev, "udev is NULL.\n");
 		goto exit;
@@ -812,7 +765,7 @@ static int adu_probe(struct usb_interface *interface,
 		dev_err(&interface->dev, "Could not retrieve serial number\n");
 		goto error;
 	}
-	dbg(2, " %s : serial_number=%s", __func__, dev->serial_number);
+	dev_dbg(&interface->dev,"serial_number=%s", dev->serial_number);
 
 	/* we can register the device now, as it is ready */
 	usb_set_intfdata(interface, dev);
@@ -830,11 +783,9 @@ static int adu_probe(struct usb_interface *interface,
 
 	/* let the user know what node this device is now attached to */
 	dev_info(&interface->dev, "ADU%d %s now attached to /dev/usb/adutux%d\n",
-		 udev->descriptor.idProduct, dev->serial_number,
+		 le16_to_cpu(udev->descriptor.idProduct), dev->serial_number,
 		 (dev->minor - ADU_MINOR_BASE));
 exit:
-	dbg(2, " %s : leave, return value %p (dev)", __func__, dev);
-
 	return retval;
 
 error:
@@ -852,8 +803,6 @@ static void adu_disconnect(struct usb_interface *interface)
 	struct adu_device *dev;
 	int minor;
 
-	dbg(2, " %s : enter", __func__);
-
 	dev = usb_get_intfdata(interface);
 
 	mutex_lock(&dev->mtx);	/* not interruptible */
@@ -866,7 +815,8 @@ static void adu_disconnect(struct usb_interface *interface)
 	usb_set_intfdata(interface, NULL);
 
 	/* if the device is not opened, then we clean up right now */
-	dbg(2, " %s : open count %d", __func__, dev->open_count);
+	dev_dbg(&dev->udev->dev, "%s : open count %d\n",
+		__func__, dev->open_count);
 	if (!dev->open_count)
 		adu_delete(dev);
 
@@ -874,8 +824,6 @@ static void adu_disconnect(struct usb_interface *interface)
 
 	dev_info(&interface->dev, "ADU device adutux%d now disconnected\n",
 		 (minor - ADU_MINOR_BASE));
-
-	dbg(2, " %s : leave", __func__);
 }
 
 /* usb specific object needed to register this driver with the usb subsystem */
diff --git a/drivers/usb/misc/ehset.c b/drivers/usb/misc/ehset.c
new file mode 100644
index 000000000000..c31b4a33e6bb
--- /dev/null
+++ b/drivers/usb/misc/ehset.c
@@ -0,0 +1,152 @@
+/*
+ * Copyright (c) 2010-2013, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/usb.h>
+#include <linux/usb/ch11.h>
+
+#define TEST_SE0_NAK_PID			0x0101
+#define TEST_J_PID				0x0102
+#define TEST_K_PID				0x0103
+#define TEST_PACKET_PID				0x0104
+#define TEST_HS_HOST_PORT_SUSPEND_RESUME	0x0106
+#define TEST_SINGLE_STEP_GET_DEV_DESC		0x0107
+#define TEST_SINGLE_STEP_SET_FEATURE		0x0108
+
+static int ehset_probe(struct usb_interface *intf,
+		       const struct usb_device_id *id)
+{
+	int ret = -EINVAL;
+	struct usb_device *dev = interface_to_usbdev(intf);
+	struct usb_device *hub_udev = dev->parent;
+	struct usb_device_descriptor *buf;
+	u8 portnum = dev->portnum;
+	u16 test_pid = le16_to_cpu(dev->descriptor.idProduct);
+
+	switch (test_pid) {
+	case TEST_SE0_NAK_PID:
+		ret = usb_control_msg(hub_udev, usb_sndctrlpipe(hub_udev, 0),
+					USB_REQ_SET_FEATURE, USB_RT_PORT,
+					USB_PORT_FEAT_TEST,
+					(TEST_SE0_NAK << 8) | portnum,
+					NULL, 0, 1000);
+		break;
+	case TEST_J_PID:
+		ret = usb_control_msg(hub_udev, usb_sndctrlpipe(hub_udev, 0),
+					USB_REQ_SET_FEATURE, USB_RT_PORT,
+					USB_PORT_FEAT_TEST,
+					(TEST_J << 8) | portnum,
+					NULL, 0, 1000);
+		break;
+	case TEST_K_PID:
+		ret = usb_control_msg(hub_udev, usb_sndctrlpipe(hub_udev, 0),
+					USB_REQ_SET_FEATURE, USB_RT_PORT,
+					USB_PORT_FEAT_TEST,
+					(TEST_K << 8) | portnum,
+					NULL, 0, 1000);
+		break;
+	case TEST_PACKET_PID:
+		ret = usb_control_msg(hub_udev, usb_sndctrlpipe(hub_udev, 0),
+					USB_REQ_SET_FEATURE, USB_RT_PORT,
+					USB_PORT_FEAT_TEST,
+					(TEST_PACKET << 8) | portnum,
+					NULL, 0, 1000);
+		break;
+	case TEST_HS_HOST_PORT_SUSPEND_RESUME:
+		/* Test: wait for 15secs -> suspend -> 15secs delay -> resume */
+		msleep(15 * 1000);
+		ret = usb_control_msg(hub_udev, usb_sndctrlpipe(hub_udev, 0),
+					USB_REQ_SET_FEATURE, USB_RT_PORT,
+					USB_PORT_FEAT_SUSPEND, portnum,
+					NULL, 0, 1000);
+		if (ret < 0)
+			break;
+
+		msleep(15 * 1000);
+		ret = usb_control_msg(hub_udev, usb_sndctrlpipe(hub_udev, 0),
+					USB_REQ_CLEAR_FEATURE, USB_RT_PORT,
+					USB_PORT_FEAT_SUSPEND, portnum,
+					NULL, 0, 1000);
+		break;
+	case TEST_SINGLE_STEP_GET_DEV_DESC:
+		/* Test: wait for 15secs -> GetDescriptor request */
+		msleep(15 * 1000);
+		buf = kmalloc(USB_DT_DEVICE_SIZE, GFP_KERNEL);
+		if (!buf)
+			return -ENOMEM;
+
+		ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
+					USB_REQ_GET_DESCRIPTOR, USB_DIR_IN,
+					USB_DT_DEVICE << 8, 0,
+					buf, USB_DT_DEVICE_SIZE,
+					USB_CTRL_GET_TIMEOUT);
+		kfree(buf);
+		break;
+	case TEST_SINGLE_STEP_SET_FEATURE:
+		/*
+		 * GetDescriptor SETUP request -> 15secs delay -> IN & STATUS
+		 *
+		 * Note, this test is only supported on root hubs since the
+		 * SetPortFeature handling can only be done inside the HCD's
+		 * hub_control callback function.
+		 */
+		if (hub_udev != dev->bus->root_hub) {
+			dev_err(&intf->dev, "SINGLE_STEP_SET_FEATURE test only supported on root hub\n");
+			break;
+		}
+
+		ret = usb_control_msg(hub_udev, usb_sndctrlpipe(hub_udev, 0),
+					USB_REQ_SET_FEATURE, USB_RT_PORT,
+					USB_PORT_FEAT_TEST,
+					(6 << 8) | portnum,
+					NULL, 0, 60 * 1000);
+
+		break;
+	default:
+		dev_err(&intf->dev, "%s: unsupported PID: 0x%x\n",
+			__func__, test_pid);
+	}
+
+	return (ret < 0) ? ret : 0;
+}
+
+static void ehset_disconnect(struct usb_interface *intf)
+{
+}
+
+static const struct usb_device_id ehset_id_table[] = {
+	{ USB_DEVICE(0x1a0a, TEST_SE0_NAK_PID) },
+	{ USB_DEVICE(0x1a0a, TEST_J_PID) },
+	{ USB_DEVICE(0x1a0a, TEST_K_PID) },
+	{ USB_DEVICE(0x1a0a, TEST_PACKET_PID) },
+	{ USB_DEVICE(0x1a0a, TEST_HS_HOST_PORT_SUSPEND_RESUME) },
+	{ USB_DEVICE(0x1a0a, TEST_SINGLE_STEP_GET_DEV_DESC) },
+	{ USB_DEVICE(0x1a0a, TEST_SINGLE_STEP_SET_FEATURE) },
+	{ }			/* Terminating entry */
+};
+MODULE_DEVICE_TABLE(usb, ehset_id_table);
+
+static struct usb_driver ehset_driver = {
+	.name =		"usb_ehset_test",
+	.probe =	ehset_probe,
+	.disconnect =	ehset_disconnect,
+	.id_table =	ehset_id_table,
+};
+
+module_usb_driver(ehset_driver);
+
+MODULE_DESCRIPTION("USB Driver for EHSET Test Fixture");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/misc/ldusb.c b/drivers/usb/misc/ldusb.c
index ac762299eaa8..b1d59532ac22 100644
--- a/drivers/usb/misc/ldusb.c
+++ b/drivers/usb/misc/ldusb.c
@@ -129,19 +129,6 @@ MODULE_DESCRIPTION("LD USB Driver");
 MODULE_LICENSE("GPL");
 MODULE_SUPPORTED_DEVICE("LD USB Devices");
 
-#ifdef CONFIG_USB_DEBUG
-	static int debug = 1;
-#else
-	static int debug = 0;
-#endif
-
-/* Use our own dbg macro */
-#define dbg_info(dev, format, arg...) do { if (debug) dev_info(dev , format , ## arg); } while (0)
-
-/* Module parameters */
-module_param(debug, int, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(debug, "Debug enabled or not");
-
 /* All interrupt in transfers are collected in a ring buffer to
  * avoid racing conditions and get better performance of the driver.
  */
@@ -256,8 +243,9 @@ static void ld_usb_interrupt_in_callback(struct urb *urb)
 		    status == -ESHUTDOWN) {
 			goto exit;
 		} else {
-			dbg_info(&dev->intf->dev, "%s: nonzero status received: %d\n",
-				 __func__, status);
+			dev_dbg(&dev->intf->dev,
+				"%s: nonzero status received: %d\n", __func__,
+				status);
 			spin_lock(&dev->rbsl);
 			goto resubmit; /* maybe we can recover */
 		}
@@ -272,8 +260,8 @@ static void ld_usb_interrupt_in_callback(struct urb *urb)
 			*actual_buffer = urb->actual_length;
 			memcpy(actual_buffer+1, dev->interrupt_in_buffer, urb->actual_length);
 			dev->ring_head = next_ring_head;
-			dbg_info(&dev->intf->dev, "%s: received %d bytes\n",
-				 __func__, urb->actual_length);
+			dev_dbg(&dev->intf->dev, "%s: received %d bytes\n",
+				__func__, urb->actual_length);
 		} else {
 			dev_warn(&dev->intf->dev,
 				 "Ring buffer overflow, %d bytes dropped\n",
@@ -310,9 +298,9 @@ static void ld_usb_interrupt_out_callback(struct urb *urb)
 	if (status && !(status == -ENOENT ||
 			status == -ECONNRESET ||
 			status == -ESHUTDOWN))
-		dbg_info(&dev->intf->dev,
-			 "%s - nonzero write interrupt status received: %d\n",
-			 __func__, status);
+		dev_dbg(&dev->intf->dev,
+			"%s - nonzero write interrupt status received: %d\n",
+			__func__, status);
 
 	dev->interrupt_out_busy = 0;
 	wake_up_interruptible(&dev->write_wait);
@@ -585,7 +573,8 @@ static ssize_t ld_usb_write(struct file *file, const char __user *buffer,
 	bytes_to_write = min(count, write_buffer_size*dev->interrupt_out_endpoint_size);
 	if (bytes_to_write < count)
 		dev_warn(&dev->intf->dev, "Write buffer overflow, %zd bytes dropped\n",count-bytes_to_write);
-	dbg_info(&dev->intf->dev, "%s: count = %zd, bytes_to_write = %zd\n", __func__, count, bytes_to_write);
+	dev_dbg(&dev->intf->dev, "%s: count = %zd, bytes_to_write = %zd\n",
+		__func__, count, bytes_to_write);
 
 	if (copy_from_user(dev->interrupt_out_buffer, buffer, bytes_to_write)) {
 		retval = -EFAULT;
diff --git a/drivers/usb/misc/legousbtower.c b/drivers/usb/misc/legousbtower.c
index 80894791c020..eb37c9542052 100644
--- a/drivers/usb/misc/legousbtower.c
+++ b/drivers/usb/misc/legousbtower.c
@@ -75,6 +75,8 @@
  *   - move reset into open to clean out spurious data
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/kernel.h>
 #include <linux/errno.h>
 #include <linux/init.h>
@@ -87,28 +89,11 @@
 #include <linux/poll.h>
 
 
-#ifdef CONFIG_USB_DEBUG
-	static int debug = 4;
-#else
-	static int debug = 0;
-#endif
-
-/* Use our own dbg macro */
-#undef dbg
-#define dbg(lvl, format, arg...)					\
-do {									\
-	if (debug >= lvl)						\
-		printk(KERN_DEBUG "%s: " format "\n", __FILE__, ##arg);	\
-} while (0)
-
 /* Version Information */
 #define DRIVER_VERSION "v0.96"
 #define DRIVER_AUTHOR "Juergen Stuber <starblue@sourceforge.net>"
 #define DRIVER_DESC "LEGO USB Tower Driver"
 
-/* Module parameters */
-module_param(debug, int, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(debug, "Debug enabled or not");
 
 /* The defaults are chosen to work with the latest versions of leJOS and NQC.
  */
@@ -298,18 +283,12 @@ static struct usb_driver tower_driver = {
 /**
  *	lego_usb_tower_debug_data
  */
-static inline void lego_usb_tower_debug_data (int level, const char *function, int size, const unsigned char *data)
+static inline void lego_usb_tower_debug_data(struct device *dev,
+					     const char *function, int size,
+					     const unsigned char *data)
 {
-	int i;
-
-	if (debug < level)
-		return;
-
-	printk (KERN_DEBUG "%s: %s - length = %d, data = ", __FILE__, function, size);
-	for (i = 0; i < size; ++i) {
-		printk ("%.2x ", data[i]);
-	}
-	printk ("\n");
+	dev_dbg(dev, "%s - length = %d, data = %*ph\n",
+		function, size, size, data);
 }
 
 
@@ -318,8 +297,6 @@ static inline void lego_usb_tower_debug_data (int level, const char *function, i
  */
 static inline void tower_delete (struct lego_usb_tower *dev)
 {
-	dbg(2, "%s: enter", __func__);
-
 	tower_abort_transfers (dev);
 
 	/* free data structures */
@@ -329,8 +306,6 @@ static inline void tower_delete (struct lego_usb_tower *dev)
 	kfree (dev->interrupt_in_buffer);
 	kfree (dev->interrupt_out_buffer);
 	kfree (dev);
-
-	dbg(2, "%s: leave", __func__);
 }
 
 
@@ -346,16 +321,13 @@ static int tower_open (struct inode *inode, struct file *file)
 	struct tower_reset_reply reset_reply;
 	int result;
 
-	dbg(2, "%s: enter", __func__);
-
 	nonseekable_open(inode, file);
 	subminor = iminor(inode);
 
 	interface = usb_find_interface (&tower_driver, subminor);
 
 	if (!interface) {
-		printk(KERN_ERR "%s - error, can't find device for minor %d\n",
-		       __func__, subminor);
+		pr_err("error, can't find device for minor %d\n", subminor);
 		retval = -ENODEV;
 		goto exit;
 	}
@@ -435,8 +407,6 @@ unlock_exit:
 	mutex_unlock(&dev->lock);
 
 exit:
-	dbg(2, "%s: leave, return value %d ", __func__, retval);
-
 	return retval;
 }
 
@@ -448,12 +418,9 @@ static int tower_release (struct inode *inode, struct file *file)
 	struct lego_usb_tower *dev;
 	int retval = 0;
 
-	dbg(2, "%s: enter", __func__);
-
 	dev = file->private_data;
 
 	if (dev == NULL) {
-		dbg(1, "%s: object is NULL", __func__);
 		retval = -ENODEV;
 		goto exit_nolock;
 	}
@@ -465,7 +432,8 @@ static int tower_release (struct inode *inode, struct file *file)
 	}
 
 	if (dev->open_count != 1) {
-		dbg(1, "%s: device not opened exactly once", __func__);
+		dev_dbg(&dev->udev->dev, "%s: device not opened exactly once\n",
+			__func__);
 		retval = -ENODEV;
 		goto unlock_exit;
 	}
@@ -491,7 +459,6 @@ unlock_exit:
 exit:
 	mutex_unlock(&open_disc_mutex);
 exit_nolock:
-	dbg(2, "%s: leave, return value %d", __func__, retval);
 	return retval;
 }
 
@@ -502,12 +469,8 @@ exit_nolock:
  */
 static void tower_abort_transfers (struct lego_usb_tower *dev)
 {
-	dbg(2, "%s: enter", __func__);
-
-	if (dev == NULL) {
-		dbg(1, "%s: dev is null", __func__);
-		goto exit;
-	}
+	if (dev == NULL)
+		return;
 
 	/* shutdown transfer */
 	if (dev->interrupt_in_running) {
@@ -518,9 +481,6 @@ static void tower_abort_transfers (struct lego_usb_tower *dev)
 	}
 	if (dev->interrupt_out_busy && dev->udev)
 		usb_kill_urb(dev->interrupt_out_urb);
-
-exit:
-	dbg(2, "%s: leave", __func__);
 }
 
 
@@ -553,8 +513,6 @@ static unsigned int tower_poll (struct file *file, poll_table *wait)
 	struct lego_usb_tower *dev;
 	unsigned int mask = 0;
 
-	dbg(2, "%s: enter", __func__);
-
 	dev = file->private_data;
 
 	if (!dev->udev)
@@ -571,8 +529,6 @@ static unsigned int tower_poll (struct file *file, poll_table *wait)
 		mask |= POLLOUT | POLLWRNORM;
 	}
 
-	dbg(2, "%s: leave, mask = %d", __func__, mask);
-
 	return mask;
 }
 
@@ -597,8 +553,6 @@ static ssize_t tower_read (struct file *file, char __user *buffer, size_t count,
 	int retval = 0;
 	unsigned long timeout = 0;
 
-	dbg(2, "%s: enter, count = %Zd", __func__, count);
-
 	dev = file->private_data;
 
 	/* lock this object */
@@ -610,13 +564,13 @@ static ssize_t tower_read (struct file *file, char __user *buffer, size_t count,
 	/* verify that the device wasn't unplugged */
 	if (dev->udev == NULL) {
 		retval = -ENODEV;
-		printk(KERN_ERR "legousbtower: No device or device unplugged %d\n", retval);
+		pr_err("No device or device unplugged %d\n", retval);
 		goto unlock_exit;
 	}
 
 	/* verify that we actually have some data to read */
 	if (count == 0) {
-		dbg(1, "%s: read request of 0 bytes", __func__);
+		dev_dbg(&dev->udev->dev, "read request of 0 bytes\n");
 		goto unlock_exit;
 	}
 
@@ -672,7 +626,6 @@ unlock_exit:
 	mutex_unlock(&dev->lock);
 
 exit:
-	dbg(2, "%s: leave, return value %d", __func__, retval);
 	return retval;
 }
 
@@ -686,8 +639,6 @@ static ssize_t tower_write (struct file *file, const char __user *buffer, size_t
 	size_t bytes_to_write;
 	int retval = 0;
 
-	dbg(2, "%s: enter, count = %Zd", __func__, count);
-
 	dev = file->private_data;
 
 	/* lock this object */
@@ -699,13 +650,13 @@ static ssize_t tower_write (struct file *file, const char __user *buffer, size_t
 	/* verify that the device wasn't unplugged */
 	if (dev->udev == NULL) {
 		retval = -ENODEV;
-		printk(KERN_ERR "legousbtower: No device or device unplugged %d\n", retval);
+		pr_err("No device or device unplugged %d\n", retval);
 		goto unlock_exit;
 	}
 
 	/* verify that we actually have some data to write */
 	if (count == 0) {
-		dbg(1, "%s: write request of 0 bytes", __func__);
+		dev_dbg(&dev->udev->dev, "write request of 0 bytes\n");
 		goto unlock_exit;
 	}
 
@@ -723,7 +674,8 @@ static ssize_t tower_write (struct file *file, const char __user *buffer, size_t
 
 	/* write the data into interrupt_out_buffer from userspace */
 	bytes_to_write = min_t(int, count, write_buffer_size);
-	dbg(4, "%s: count = %Zd, bytes_to_write = %Zd", __func__, count, bytes_to_write);
+	dev_dbg(&dev->udev->dev, "%s: count = %Zd, bytes_to_write = %Zd\n",
+		__func__, count, bytes_to_write);
 
 	if (copy_from_user (dev->interrupt_out_buffer, buffer, bytes_to_write)) {
 		retval = -EFAULT;
@@ -757,8 +709,6 @@ unlock_exit:
 	mutex_unlock(&dev->lock);
 
 exit:
-	dbg(2, "%s: leave, return value %d", __func__, retval);
-
 	return retval;
 }
 
@@ -772,9 +722,8 @@ static void tower_interrupt_in_callback (struct urb *urb)
 	int status = urb->status;
 	int retval;
 
-	dbg(4, "%s: enter, status %d", __func__, status);
-
-	lego_usb_tower_debug_data(5, __func__, urb->actual_length, urb->transfer_buffer);
+	lego_usb_tower_debug_data(&dev->udev->dev, __func__,
+				  urb->actual_length, urb->transfer_buffer);
 
 	if (status) {
 		if (status == -ENOENT ||
@@ -782,7 +731,9 @@ static void tower_interrupt_in_callback (struct urb *urb)
 		    status == -ESHUTDOWN) {
 			goto exit;
 		} else {
-			dbg(1, "%s: nonzero status received: %d", __func__, status);
+			dev_dbg(&dev->udev->dev,
+				"%s: nonzero status received: %d\n", __func__,
+				status);
 			goto resubmit; /* maybe we can recover */
 		}
 	}
@@ -795,9 +746,11 @@ static void tower_interrupt_in_callback (struct urb *urb)
 				urb->actual_length);
 			dev->read_buffer_length += urb->actual_length;
 			dev->read_last_arrival = jiffies;
-			dbg(3, "%s: received %d bytes", __func__, urb->actual_length);
+			dev_dbg(&dev->udev->dev, "%s: received %d bytes\n",
+				__func__, urb->actual_length);
 		} else {
-			printk(KERN_WARNING "%s: read_buffer overflow, %d bytes dropped", __func__, urb->actual_length);
+			pr_warn("read_buffer overflow, %d bytes dropped\n",
+				urb->actual_length);
 		}
 		spin_unlock (&dev->read_buffer_lock);
 	}
@@ -815,9 +768,6 @@ resubmit:
 exit:
 	dev->interrupt_in_done = 1;
 	wake_up_interruptible (&dev->read_wait);
-
-	lego_usb_tower_debug_data(5, __func__, urb->actual_length, urb->transfer_buffer);
-	dbg(4, "%s: leave, status %d", __func__, status);
 }
 
 
@@ -829,22 +779,20 @@ static void tower_interrupt_out_callback (struct urb *urb)
 	struct lego_usb_tower *dev = urb->context;
 	int status = urb->status;
 
-	dbg(4, "%s: enter, status %d", __func__, status);
-	lego_usb_tower_debug_data(5, __func__, urb->actual_length, urb->transfer_buffer);
+	lego_usb_tower_debug_data(&dev->udev->dev, __func__,
+				  urb->actual_length, urb->transfer_buffer);
 
 	/* sync/async unlink faults aren't errors */
 	if (status && !(status == -ENOENT ||
 			status == -ECONNRESET ||
 			status == -ESHUTDOWN)) {
-		dbg(1, "%s - nonzero write bulk status received: %d",
-		    __func__, status);
+		dev_dbg(&dev->udev->dev,
+			"%s: nonzero write bulk status received: %d\n", __func__,
+			status);
 	}
 
 	dev->interrupt_out_busy = 0;
 	wake_up_interruptible(&dev->write_wait);
-
-	lego_usb_tower_debug_data(5, __func__, urb->actual_length, urb->transfer_buffer);
-	dbg(4, "%s: leave, status %d", __func__, status);
 }
 
 
@@ -866,8 +814,6 @@ static int tower_probe (struct usb_interface *interface, const struct usb_device
 	int retval = -ENOMEM;
 	int result;
 
-	dbg(2, "%s: enter", __func__);
-
 	/* allocate memory for our device state and initialize it */
 
 	dev = kmalloc (sizeof(struct lego_usb_tower), GFP_KERNEL);
@@ -993,8 +939,6 @@ static int tower_probe (struct usb_interface *interface, const struct usb_device
 
 
 exit:
-	dbg(2, "%s: leave, return value 0x%.8lx (dev)", __func__, (long) dev);
-
 	return retval;
 
 error:
@@ -1013,8 +957,6 @@ static void tower_disconnect (struct usb_interface *interface)
 	struct lego_usb_tower *dev;
 	int minor;
 
-	dbg(2, "%s: enter", __func__);
-
 	dev = usb_get_intfdata (interface);
 	mutex_lock(&open_disc_mutex);
 	usb_set_intfdata (interface, NULL);
@@ -1041,8 +983,6 @@ static void tower_disconnect (struct usb_interface *interface)
 
 	dev_info(&interface->dev, "LEGO USB Tower #%d now disconnected\n",
 		 (minor - LEGO_USB_TOWER_MINOR_BASE));
-
-	dbg(2, "%s: leave", __func__);
 }
 
 module_usb_driver(tower_driver);
diff --git a/drivers/usb/misc/sisusbvga/sisusb.c b/drivers/usb/misc/sisusbvga/sisusb.c
index c21386ec5d35..de98906f786d 100644
--- a/drivers/usb/misc/sisusbvga/sisusb.c
+++ b/drivers/usb/misc/sisusbvga/sisusb.c
@@ -3247,6 +3247,7 @@ static const struct usb_device_id sisusb_table[] = {
 	{ USB_DEVICE(0x0711, 0x0903) },
 	{ USB_DEVICE(0x0711, 0x0918) },
 	{ USB_DEVICE(0x0711, 0x0920) },
+	{ USB_DEVICE(0x0711, 0x0950) },
 	{ USB_DEVICE(0x182d, 0x021c) },
 	{ USB_DEVICE(0x182d, 0x0269) },
 	{ }
diff --git a/drivers/usb/misc/usb3503.c b/drivers/usb/misc/usb3503.c
index c3578393ddef..a31641e18d19 100644
--- a/drivers/usb/misc/usb3503.c
+++ b/drivers/usb/misc/usb3503.c
@@ -26,6 +26,7 @@
 #include <linux/of_gpio.h>
 #include <linux/platform_device.h>
 #include <linux/platform_data/usb3503.h>
+#include <linux/regmap.h>
 
 #define USB3503_VIDL		0x00
 #define USB3503_VIDM		0x01
@@ -50,60 +51,25 @@
 #define USB3503_CFGP		0xee
 #define USB3503_CLKSUSP		(1 << 7)
 
+#define USB3503_RESET		0xff
+
 struct usb3503 {
 	enum usb3503_mode	mode;
-	struct i2c_client	*client;
+	struct regmap		*regmap;
+	struct device		*dev;
 	u8	port_off_mask;
 	int	gpio_intn;
 	int	gpio_reset;
 	int	gpio_connect;
 };
 
-static int usb3503_write_register(struct i2c_client *client,
-		char reg, char data)
-{
-	return i2c_smbus_write_byte_data(client, reg, data);
-}
-
-static int usb3503_read_register(struct i2c_client *client, char reg)
-{
-	return i2c_smbus_read_byte_data(client, reg);
-}
-
-static int usb3503_set_bits(struct i2c_client *client, char reg, char req)
+static int usb3503_reset(struct usb3503 *hub, int state)
 {
-	int err;
-
-	err = usb3503_read_register(client, reg);
-	if (err < 0)
-		return err;
-
-	err = usb3503_write_register(client, reg, err | req);
-	if (err < 0)
-		return err;
-
-	return 0;
-}
-
-static int usb3503_clear_bits(struct i2c_client *client, char reg, char req)
-{
-	int err;
-
-	err = usb3503_read_register(client, reg);
-	if (err < 0)
-		return err;
-
-	err = usb3503_write_register(client, reg, err & ~req);
-	if (err < 0)
-		return err;
-
-	return 0;
-}
+	if (!state && gpio_is_valid(hub->gpio_connect))
+		gpio_set_value_cansleep(hub->gpio_connect, 0);
 
-static int usb3503_reset(int gpio_reset, int state)
-{
-	if (gpio_is_valid(gpio_reset))
-		gpio_set_value(gpio_reset, state);
+	if (gpio_is_valid(hub->gpio_reset))
+		gpio_set_value_cansleep(hub->gpio_reset, state);
 
 	/* Wait T_HUBINIT == 4ms for hub logic to stabilize */
 	if (state)
@@ -112,90 +78,105 @@ static int usb3503_reset(int gpio_reset, int state)
 	return 0;
 }
 
-static int usb3503_switch_mode(struct usb3503 *hub, enum usb3503_mode mode)
+static int usb3503_connect(struct usb3503 *hub)
 {
-	struct i2c_client *i2c = hub->client;
-	int err = 0;
+	struct device *dev = hub->dev;
+	int err;
 
-	switch (mode) {
-	case USB3503_MODE_HUB:
-		usb3503_reset(hub->gpio_reset, 1);
+	usb3503_reset(hub, 1);
 
+	if (hub->regmap) {
 		/* SP_ILOCK: set connect_n, config_n for config */
-		err = usb3503_write_register(i2c, USB3503_SP_ILOCK,
-				(USB3503_SPILOCK_CONNECT
+		err = regmap_write(hub->regmap, USB3503_SP_ILOCK,
+			   (USB3503_SPILOCK_CONNECT
 				 | USB3503_SPILOCK_CONFIG));
 		if (err < 0) {
-			dev_err(&i2c->dev, "SP_ILOCK failed (%d)\n", err);
-			goto err_hubmode;
+			dev_err(dev, "SP_ILOCK failed (%d)\n", err);
+			return err;
 		}
 
 		/* PDS : Disable For Self Powered Operation */
 		if (hub->port_off_mask) {
-			err = usb3503_set_bits(i2c, USB3503_PDS,
+			err = regmap_update_bits(hub->regmap, USB3503_PDS,
+					hub->port_off_mask,
 					hub->port_off_mask);
 			if (err < 0) {
-				dev_err(&i2c->dev, "PDS failed (%d)\n", err);
-				goto err_hubmode;
+				dev_err(dev, "PDS failed (%d)\n", err);
+				return err;
 			}
 		}
 
 		/* CFG1 : SELF_BUS_PWR -> Self-Powerd operation */
-		err = usb3503_set_bits(i2c, USB3503_CFG1, USB3503_SELF_BUS_PWR);
+		err = regmap_update_bits(hub->regmap, USB3503_CFG1,
+					 USB3503_SELF_BUS_PWR,
+					 USB3503_SELF_BUS_PWR);
 		if (err < 0) {
-			dev_err(&i2c->dev, "CFG1 failed (%d)\n", err);
-			goto err_hubmode;
+			dev_err(dev, "CFG1 failed (%d)\n", err);
+			return err;
 		}
 
 		/* SP_LOCK: clear connect_n, config_n for hub connect */
-		err = usb3503_clear_bits(i2c, USB3503_SP_ILOCK,
-				(USB3503_SPILOCK_CONNECT
-				 | USB3503_SPILOCK_CONFIG));
+		err = regmap_update_bits(hub->regmap, USB3503_SP_ILOCK,
+					 (USB3503_SPILOCK_CONNECT
+					  | USB3503_SPILOCK_CONFIG), 0);
 		if (err < 0) {
-			dev_err(&i2c->dev, "SP_ILOCK failed (%d)\n", err);
-			goto err_hubmode;
+			dev_err(dev, "SP_ILOCK failed (%d)\n", err);
+			return err;
 		}
+	}
 
-		hub->mode = mode;
-		dev_info(&i2c->dev, "switched to HUB mode\n");
+	if (gpio_is_valid(hub->gpio_connect))
+		gpio_set_value_cansleep(hub->gpio_connect, 1);
+
+	hub->mode = USB3503_MODE_HUB;
+	dev_info(dev, "switched to HUB mode\n");
+
+	return 0;
+}
+
+static int usb3503_switch_mode(struct usb3503 *hub, enum usb3503_mode mode)
+{
+	struct device *dev = hub->dev;
+	int err = 0;
+
+	switch (mode) {
+	case USB3503_MODE_HUB:
+		err = usb3503_connect(hub);
 		break;
 
 	case USB3503_MODE_STANDBY:
-		usb3503_reset(hub->gpio_reset, 0);
+		usb3503_reset(hub, 0);
 
 		hub->mode = mode;
-		dev_info(&i2c->dev, "switched to STANDBY mode\n");
+		dev_info(dev, "switched to STANDBY mode\n");
 		break;
 
 	default:
-		dev_err(&i2c->dev, "unknown mode is request\n");
+		dev_err(dev, "unknown mode is requested\n");
 		err = -EINVAL;
 		break;
 	}
 
-err_hubmode:
 	return err;
 }
 
-static int usb3503_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
+static const struct regmap_config usb3503_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+
+	.max_register = USB3503_RESET,
+};
+
+static int usb3503_probe(struct usb3503 *hub)
 {
-	struct usb3503_platform_data *pdata = i2c->dev.platform_data;
-	struct device_node *np = i2c->dev.of_node;
-	struct usb3503 *hub;
-	int err = -ENOMEM;
-	u32 mode = USB3503_MODE_UNKNOWN;
+	struct device *dev = hub->dev;
+	struct usb3503_platform_data *pdata = dev_get_platdata(dev);
+	struct device_node *np = dev->of_node;
+	int err;
+	u32 mode = USB3503_MODE_HUB;
 	const u32 *property;
 	int len;
 
-	hub = kzalloc(sizeof(struct usb3503), GFP_KERNEL);
-	if (!hub) {
-		dev_err(&i2c->dev, "private data alloc fail\n");
-		return err;
-	}
-
-	i2c_set_clientdata(i2c, hub);
-	hub->client = i2c;
-
 	if (pdata) {
 		hub->port_off_mask	= pdata->port_off_mask;
 		hub->gpio_intn		= pdata->gpio_intn;
@@ -215,10 +196,10 @@ static int usb3503_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
 			}
 		}
 
-		hub->gpio_intn	= of_get_named_gpio(np, "connect-gpios", 0);
+		hub->gpio_intn	= of_get_named_gpio(np, "intn-gpios", 0);
 		if (hub->gpio_intn == -EPROBE_DEFER)
 			return -EPROBE_DEFER;
-		hub->gpio_connect = of_get_named_gpio(np, "intn-gpios", 0);
+		hub->gpio_connect = of_get_named_gpio(np, "connect-gpios", 0);
 		if (hub->gpio_connect == -EPROBE_DEFER)
 			return -EPROBE_DEFER;
 		hub->gpio_reset = of_get_named_gpio(np, "reset-gpios", 0);
@@ -228,72 +209,86 @@ static int usb3503_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
 		hub->mode = mode;
 	}
 
+	if (hub->port_off_mask && !hub->regmap)
+		dev_err(dev, "Ports disabled with no control interface\n");
+
 	if (gpio_is_valid(hub->gpio_intn)) {
-		err = gpio_request_one(hub->gpio_intn,
+		err = devm_gpio_request_one(dev, hub->gpio_intn,
 				GPIOF_OUT_INIT_HIGH, "usb3503 intn");
 		if (err) {
-			dev_err(&i2c->dev,
-					"unable to request GPIO %d as connect pin (%d)\n",
-					hub->gpio_intn, err);
-			goto err_out;
+			dev_err(dev,
+				"unable to request GPIO %d as connect pin (%d)\n",
+				hub->gpio_intn, err);
+			return err;
 		}
 	}
 
 	if (gpio_is_valid(hub->gpio_connect)) {
-		err = gpio_request_one(hub->gpio_connect,
-				GPIOF_OUT_INIT_HIGH, "usb3503 connect");
+		err = devm_gpio_request_one(dev, hub->gpio_connect,
+				GPIOF_OUT_INIT_LOW, "usb3503 connect");
 		if (err) {
-			dev_err(&i2c->dev,
-					"unable to request GPIO %d as connect pin (%d)\n",
-					hub->gpio_connect, err);
-			goto err_gpio_connect;
+			dev_err(dev,
+				"unable to request GPIO %d as connect pin (%d)\n",
+				hub->gpio_connect, err);
+			return err;
 		}
 	}
 
 	if (gpio_is_valid(hub->gpio_reset)) {
-		err = gpio_request_one(hub->gpio_reset,
+		err = devm_gpio_request_one(dev, hub->gpio_reset,
 				GPIOF_OUT_INIT_LOW, "usb3503 reset");
 		if (err) {
-			dev_err(&i2c->dev,
-					"unable to request GPIO %d as reset pin (%d)\n",
-					hub->gpio_reset, err);
-			goto err_gpio_reset;
+			dev_err(dev,
+				"unable to request GPIO %d as reset pin (%d)\n",
+				hub->gpio_reset, err);
+			return err;
 		}
 	}
 
 	usb3503_switch_mode(hub, hub->mode);
 
-	dev_info(&i2c->dev, "%s: probed on  %s mode\n", __func__,
+	dev_info(dev, "%s: probed in %s mode\n", __func__,
 			(hub->mode == USB3503_MODE_HUB) ? "hub" : "standby");
 
 	return 0;
+}
 
-err_gpio_reset:
-	if (gpio_is_valid(hub->gpio_connect))
-		gpio_free(hub->gpio_connect);
-err_gpio_connect:
-	if (gpio_is_valid(hub->gpio_intn))
-		gpio_free(hub->gpio_intn);
-err_out:
-	kfree(hub);
+static int usb3503_i2c_probe(struct i2c_client *i2c,
+			     const struct i2c_device_id *id)
+{
+	struct usb3503 *hub;
+	int err;
 
-	return err;
+	hub = devm_kzalloc(&i2c->dev, sizeof(struct usb3503), GFP_KERNEL);
+	if (!hub) {
+		dev_err(&i2c->dev, "private data alloc fail\n");
+		return -ENOMEM;
+	}
+
+	i2c_set_clientdata(i2c, hub);
+	hub->regmap = devm_regmap_init_i2c(i2c, &usb3503_regmap_config);
+	if (IS_ERR(hub->regmap)) {
+		err = PTR_ERR(hub->regmap);
+		dev_err(&i2c->dev, "Failed to initialise regmap: %d\n", err);
+		return err;
+	}
+	hub->dev = &i2c->dev;
+
+	return usb3503_probe(hub);
 }
 
-static int usb3503_remove(struct i2c_client *i2c)
+static int usb3503_platform_probe(struct platform_device *pdev)
 {
-	struct usb3503 *hub = i2c_get_clientdata(i2c);
-
-	if (gpio_is_valid(hub->gpio_intn))
-		gpio_free(hub->gpio_intn);
-	if (gpio_is_valid(hub->gpio_connect))
-		gpio_free(hub->gpio_connect);
-	if (gpio_is_valid(hub->gpio_reset))
-		gpio_free(hub->gpio_reset);
+	struct usb3503 *hub;
 
-	kfree(hub);
+	hub = devm_kzalloc(&pdev->dev, sizeof(struct usb3503), GFP_KERNEL);
+	if (!hub) {
+		dev_err(&pdev->dev, "private data alloc fail\n");
+		return -ENOMEM;
+	}
+	hub->dev = &pdev->dev;
 
-	return 0;
+	return usb3503_probe(hub);
 }
 
 static const struct i2c_device_id usb3503_id[] = {
@@ -305,22 +300,53 @@ MODULE_DEVICE_TABLE(i2c, usb3503_id);
 #ifdef CONFIG_OF
 static const struct of_device_id usb3503_of_match[] = {
 	{ .compatible = "smsc,usb3503", },
+	{ .compatible = "smsc,usb3503a", },
 	{},
 };
 MODULE_DEVICE_TABLE(of, usb3503_of_match);
 #endif
 
-static struct i2c_driver usb3503_driver = {
+static struct i2c_driver usb3503_i2c_driver = {
 	.driver = {
 		.name = USB3503_I2C_NAME,
 		.of_match_table = of_match_ptr(usb3503_of_match),
 	},
-	.probe		= usb3503_probe,
-	.remove		= usb3503_remove,
+	.probe		= usb3503_i2c_probe,
 	.id_table	= usb3503_id,
 };
 
-module_i2c_driver(usb3503_driver);
+static struct platform_driver usb3503_platform_driver = {
+	.driver = {
+		.name = USB3503_I2C_NAME,
+		.of_match_table = of_match_ptr(usb3503_of_match),
+		.owner = THIS_MODULE,
+	},
+	.probe		= usb3503_platform_probe,
+};
+
+static int __init usb3503_init(void)
+{
+	int err;
+
+	err = i2c_register_driver(THIS_MODULE, &usb3503_i2c_driver);
+	if (err != 0)
+		pr_err("usb3503: Failed to register I2C driver: %d\n", err);
+
+	err = platform_driver_register(&usb3503_platform_driver);
+	if (err != 0)
+		pr_err("usb3503: Failed to register platform driver: %d\n",
+		       err);
+
+	return 0;
+}
+module_init(usb3503_init);
+
+static void __exit usb3503_exit(void)
+{
+	platform_driver_unregister(&usb3503_platform_driver);
+	i2c_del_driver(&usb3503_i2c_driver);
+}
+module_exit(usb3503_exit);
 
 MODULE_AUTHOR("Dongjin Kim <tobetter@gmail.com>");
 MODULE_DESCRIPTION("USB3503 USB HUB driver");
diff --git a/drivers/usb/misc/usbtest.c b/drivers/usb/misc/usbtest.c
index 8b4ca1cb450a..aa28ac8c7607 100644
--- a/drivers/usb/misc/usbtest.c
+++ b/drivers/usb/misc/usbtest.c
@@ -747,9 +747,9 @@ static int ch9_postconfig(struct usbtest_dev *dev)
 
 	/* [9.4.5] get_status always works */
 	retval = usb_get_status(udev, USB_RECIP_DEVICE, 0, dev->buf);
-	if (retval != 2) {
+	if (retval) {
 		dev_err(&iface->dev, "get dev status --> %d\n", retval);
-		return (retval < 0) ? retval : -EDOM;
+		return retval;
 	}
 
 	/* FIXME configuration.bmAttributes says if we could try to set/clear
@@ -758,9 +758,9 @@ static int ch9_postconfig(struct usbtest_dev *dev)
 
 	retval = usb_get_status(udev, USB_RECIP_INTERFACE,
 			iface->altsetting[0].desc.bInterfaceNumber, dev->buf);
-	if (retval != 2) {
+	if (retval) {
 		dev_err(&iface->dev, "get interface status --> %d\n", retval);
-		return (retval < 0) ? retval : -EDOM;
+		return retval;
 	}
 	/* FIXME get status for each endpoint in the interface */
 
@@ -1351,7 +1351,6 @@ static int verify_halted(struct usbtest_dev *tdev, int ep, struct urb *urb)
 				ep, retval);
 		return retval;
 	}
-	le16_to_cpus(&status);
 	if (status != 1) {
 		ERROR(tdev, "ep %02x bogus status: %04x != 1\n", ep, status);
 		return -EINVAL;
diff --git a/drivers/usb/misc/uss720.c b/drivers/usb/misc/uss720.c
index e129cf661223..40ef40affe83 100644
--- a/drivers/usb/misc/uss720.c
+++ b/drivers/usb/misc/uss720.c
@@ -75,7 +75,7 @@ struct uss720_async_request {
 	struct list_head asynclist;
 	struct completion compl;
 	struct urb *urb;
-	struct usb_ctrlrequest dr;
+	struct usb_ctrlrequest *dr;
 	__u8 reg[7];
 };
 
@@ -98,6 +98,7 @@ static void destroy_async(struct kref *kref)
 
 	if (likely(rq->urb))
 		usb_free_urb(rq->urb);
+	kfree(rq->dr);
 	spin_lock_irqsave(&priv->asynclock, flags);
 	list_del_init(&rq->asynclist);
 	spin_unlock_irqrestore(&priv->asynclock, flags);
@@ -120,7 +121,7 @@ static void async_complete(struct urb *urb)
 	if (status) {
 		dev_err(&urb->dev->dev, "async_complete: urb error %d\n",
 			status);
-	} else if (rq->dr.bRequest == 3) {
+	} else if (rq->dr->bRequest == 3) {
 		memcpy(priv->reg, rq->reg, sizeof(priv->reg));
 #if 0
 		dev_dbg(&priv->usbdev->dev,
@@ -152,7 +153,7 @@ static struct uss720_async_request *submit_async_request(struct parport_uss720_p
 	usbdev = priv->usbdev;
 	if (!usbdev)
 		return NULL;
-	rq = kmalloc(sizeof(struct uss720_async_request), mem_flags);
+	rq = kzalloc(sizeof(struct uss720_async_request), mem_flags);
 	if (!rq) {
 		dev_err(&usbdev->dev, "submit_async_request out of memory\n");
 		return NULL;
@@ -168,13 +169,18 @@ static struct uss720_async_request *submit_async_request(struct parport_uss720_p
 		dev_err(&usbdev->dev, "submit_async_request out of memory\n");
 		return NULL;
 	}
-	rq->dr.bRequestType = requesttype;
-	rq->dr.bRequest = request;
-	rq->dr.wValue = cpu_to_le16(value);
-	rq->dr.wIndex = cpu_to_le16(index);
-	rq->dr.wLength = cpu_to_le16((request == 3) ? sizeof(rq->reg) : 0);
+	rq->dr = kmalloc(sizeof(*rq->dr), mem_flags);
+	if (!rq->dr) {
+		kref_put(&rq->ref_count, destroy_async);
+		return NULL;
+	}
+	rq->dr->bRequestType = requesttype;
+	rq->dr->bRequest = request;
+	rq->dr->wValue = cpu_to_le16(value);
+	rq->dr->wIndex = cpu_to_le16(index);
+	rq->dr->wLength = cpu_to_le16((request == 3) ? sizeof(rq->reg) : 0);
 	usb_fill_control_urb(rq->urb, usbdev, (requesttype & 0x80) ? usb_rcvctrlpipe(usbdev, 0) : usb_sndctrlpipe(usbdev, 0),
-			     (unsigned char *)&rq->dr,
+			     (unsigned char *)rq->dr,
 			     (request == 3) ? rq->reg : NULL, (request == 3) ? sizeof(rq->reg) : 0, async_complete, rq);
 	/* rq->urb->transfer_flags |= URB_ASYNC_UNLINK; */
 	spin_lock_irqsave(&priv->asynclock, flags);