1 files changed, 284 insertions, 0 deletions
diff --git a/drivers/usb/misc/cypress_cy7c63.c b/drivers/usb/misc/cypress_cy7c63.c
new file mode 100644
index 000000000000..9c46746d5d00
--- /dev/null
+++ b/drivers/usb/misc/cypress_cy7c63.c
@@ -0,0 +1,284 @@
+/*
+* cypress_cy7c63.c
+*
+* Copyright (c) 2006 Oliver Bock (o.bock@fh-wolfenbuettel.de)
+*
+*	This driver is based on the Cypress USB Driver by Marcus Maul
+*	(cyport) and the 2.0 version of Greg Kroah-Hartman's
+*	USB Skeleton driver.
+*
+*	This is a generic driver for the Cypress CY7C63xxx family.
+*	For the time being it enables you to read from and write to
+*	the single I/O ports of the device.
+*
+*	Supported vendors:	AK Modul-Bus Computer GmbH
+*				(Firmware "Port-Chip")
+*
+*	Supported devices:	CY7C63001A-PC
+*				CY7C63001C-PXC
+*				CY7C63001C-SXC
+*
+*	Supported functions:	Read/Write Ports
+*
+*
+*	This program is free software; you can redistribute it and/or
+*	modify it under the terms of the GNU General Public License as
+*	published by the Free Software Foundation, version 2.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/usb.h>
+
+#define DRIVER_AUTHOR		"Oliver Bock (o.bock@fh-wolfenbuettel.de)"
+#define DRIVER_DESC		"Cypress CY7C63xxx USB driver"
+
+#define CYPRESS_VENDOR_ID	0xa2c
+#define CYPRESS_PRODUCT_ID	0x8
+
+#define CYPRESS_READ_PORT	0x4
+#define CYPRESS_WRITE_PORT	0x5
+
+#define CYPRESS_READ_RAM	0x2
+#define CYPRESS_WRITE_RAM	0x3
+#define CYPRESS_READ_ROM	0x1
+
+#define CYPRESS_READ_PORT_ID0	0
+#define CYPRESS_WRITE_PORT_ID0	0
+#define CYPRESS_READ_PORT_ID1	0x2
+#define CYPRESS_WRITE_PORT_ID1	1
+
+#define CYPRESS_MAX_REQSIZE	8
+
+
+/* table of devices that work with this driver */
+static struct usb_device_id cypress_table [] = {
+	{ USB_DEVICE(CYPRESS_VENDOR_ID, CYPRESS_PRODUCT_ID) },
+	{ }
+};
+MODULE_DEVICE_TABLE(usb, cypress_table);
+
+/* structure to hold all of our device specific stuff */
+struct cypress {
+	struct usb_device *	udev;
+	unsigned char		port[2];
+};
+
+/* used to send usb control messages to device */
+static int vendor_command(struct cypress *dev, unsigned char request,
+			  unsigned char address, unsigned char data)
+{
+	int retval = 0;
+	unsigned int pipe;
+	unsigned char *iobuf;
+
+	/* allocate some memory for the i/o buffer*/
+	iobuf = kzalloc(CYPRESS_MAX_REQSIZE, GFP_KERNEL);
+	if (!iobuf) {
+		dev_err(&dev->udev->dev, "Out of memory!\n");
+		retval = -ENOMEM;
+		goto error;
+	}
+
+	dev_dbg(&dev->udev->dev, "Sending usb_control_msg (data: %d)\n", data);
+
+	/* prepare usb control message and send it upstream */
+	pipe = usb_rcvctrlpipe(dev->udev, 0);
+	retval = usb_control_msg(dev->udev, pipe, request,
+				 USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_OTHER,
+				 address, data, iobuf, CYPRESS_MAX_REQSIZE,
+				 USB_CTRL_GET_TIMEOUT);
+
+	/* store returned data (more READs to be added) */
+	switch (request) {
+		case CYPRESS_READ_PORT:
+			if (address == CYPRESS_READ_PORT_ID0) {
+				dev->port[0] = iobuf[1];
+				dev_dbg(&dev->udev->dev,
+					"READ_PORT0 returned: %d\n",
+					dev->port[0]);
+			}
+			else if (address == CYPRESS_READ_PORT_ID1) {
+				dev->port[1] = iobuf[1];
+				dev_dbg(&dev->udev->dev,
+					"READ_PORT1 returned: %d\n",
+					dev->port[1]);
+			}
+			break;
+	}
+
+	kfree(iobuf);
+error:
+	return retval;
+}
+
+/* write port value */
+static ssize_t write_port(struct device *dev, struct device_attribute *attr,
+			  const char *buf, size_t count,
+			  int port_num, int write_id)
+{
+	int value = -1;
+	int result = 0;
+
+	struct usb_interface *intf = to_usb_interface(dev);
+	struct cypress *cyp = usb_get_intfdata(intf);
+
+	dev_dbg(&cyp->udev->dev, "WRITE_PORT%d called\n", port_num);
+
+	/* validate input data */
+	if (sscanf(buf, "%d", &value) < 1) {
+		result = -EINVAL;
+		goto error;
+	}
+	if (value < 0 || value > 255) {
+		result = -EINVAL;
+		goto error;
+	}
+
+	result = vendor_command(cyp, CYPRESS_WRITE_PORT, write_id,
+				(unsigned char)value);
+
+	dev_dbg(&cyp->udev->dev, "Result of vendor_command: %d\n\n", result);
+error:
+	return result < 0 ? result : count;
+}
+
+/* attribute callback handler (write) */
+static ssize_t set_port0_handler(struct device *dev,
+				 struct device_attribute *attr,
+				 const char *buf, size_t count)
+{
+	return write_port(dev, attr, buf, count, 0, CYPRESS_WRITE_PORT_ID0);
+}
+
+/* attribute callback handler (write) */
+static ssize_t set_port1_handler(struct device *dev,
+				 struct device_attribute *attr,
+				 const char *buf, size_t count)
+{
+	return write_port(dev, attr, buf, count, 1, CYPRESS_WRITE_PORT_ID1);
+}
+
+/* read port value */
+static ssize_t read_port(struct device *dev, struct device_attribute *attr,
+			 char *buf, int port_num, int read_id)
+{
+	int result = 0;
+
+	struct usb_interface *intf = to_usb_interface(dev);
+	struct cypress *cyp = usb_get_intfdata(intf);
+
+	dev_dbg(&cyp->udev->dev, "READ_PORT%d called\n", port_num);
+
+	result = vendor_command(cyp, CYPRESS_READ_PORT, read_id, 0);
+
+	dev_dbg(&cyp->udev->dev, "Result of vendor_command: %d\n\n", result);
+
+	return sprintf(buf, "%d", cyp->port[port_num]);
+}
+
+/* attribute callback handler (read) */
+static ssize_t get_port0_handler(struct device *dev,
+				 struct device_attribute *attr, char *buf)
+{
+	return read_port(dev, attr, buf, 0, CYPRESS_READ_PORT_ID0);
+}
+
+/* attribute callback handler (read) */
+static ssize_t get_port1_handler(struct device *dev,
+				 struct device_attribute *attr, char *buf)
+{
+	return read_port(dev, attr, buf, 1, CYPRESS_READ_PORT_ID1);
+}
+
+static DEVICE_ATTR(port0, S_IWUGO | S_IRUGO,
+		   get_port0_handler, set_port0_handler);
+
+static DEVICE_ATTR(port1, S_IWUGO | S_IRUGO,
+		   get_port1_handler, set_port1_handler);
+
+
+static int cypress_probe(struct usb_interface *interface,
+			 const struct usb_device_id *id)
+{
+	struct cypress *dev = NULL;
+	int retval = -ENOMEM;
+
+	/* allocate memory for our device state and initialize it */
+	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+	if (dev == NULL) {
+		dev_err(&interface->dev, "Out of memory!\n");
+		goto error;
+	}
+
+	dev->udev = usb_get_dev(interface_to_usbdev(interface));
+
+	/* save our data pointer in this interface device */
+	usb_set_intfdata(interface, dev);
+
+	/* create device attribute files */
+	device_create_file(&interface->dev, &dev_attr_port0);
+	device_create_file(&interface->dev, &dev_attr_port1);
+
+	/* let the user know that the device is now attached */
+	dev_info(&interface->dev,
+		 "Cypress CY7C63xxx device now attached\n");
+
+	retval = 0;
+error:
+	return retval;
+}
+
+static void cypress_disconnect(struct usb_interface *interface)
+{
+	struct cypress *dev;
+
+	dev = usb_get_intfdata(interface);
+	usb_set_intfdata(interface, NULL);
+
+	/* remove device attribute files */
+	device_remove_file(&interface->dev, &dev_attr_port0);
+	device_remove_file(&interface->dev, &dev_attr_port1);
+
+	usb_put_dev(dev->udev);
+
+	dev_info(&interface->dev,
+		 "Cypress CY7C63xxx device now disconnected\n");
+
+	kfree(dev);
+}
+
+static struct usb_driver cypress_driver = {
+	.name = "cypress_cy7c63",
+	.probe = cypress_probe,
+	.disconnect = cypress_disconnect,
+	.id_table = cypress_table,
+};
+
+static int __init cypress_init(void)
+{
+	int result;
+
+	/* register this driver with the USB subsystem */
+	result = usb_register(&cypress_driver);
+	if (result) {
+		err("Function usb_register failed! Error number: %d\n", result);
+	}
+
+	return result;
+}
+
+static void __exit cypress_exit(void)
+{
+	/* deregister this driver with the USB subsystem */
+	usb_deregister(&cypress_driver);
+}
+
+module_init(cypress_init);
+module_exit(cypress_exit);
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+
+MODULE_LICENSE("GPL");