summaryrefslogtreecommitdiff
path: root/drivers/usb/host
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/host')
-rw-r--r--drivers/usb/host/uhci-pci.c10
-rw-r--r--drivers/usb/host/xhci-pci.c12
-rw-r--r--drivers/usb/host/xhci-ring.c29
-rw-r--r--drivers/usb/host/xhci.h2
4 files changed, 45 insertions, 8 deletions
diff --git a/drivers/usb/host/uhci-pci.c b/drivers/usb/host/uhci-pci.c
index 3592f757fe05..7bd2fddde770 100644
--- a/drivers/usb/host/uhci-pci.c
+++ b/drivers/usb/host/uhci-pci.c
@@ -119,11 +119,13 @@ static int uhci_pci_init(struct usb_hcd *hcd)
uhci->rh_numports = uhci_count_ports(hcd);
- /* Intel controllers report the OverCurrent bit active on.
- * VIA controllers report it active off, so we'll adjust the
- * bit value. (It's not standardized in the UHCI spec.)
+ /*
+ * Intel controllers report the OverCurrent bit active on. VIA
+ * and ZHAOXIN controllers report it active off, so we'll adjust
+ * the bit value. (It's not standardized in the UHCI spec.)
*/
- if (to_pci_dev(uhci_dev(uhci))->vendor == PCI_VENDOR_ID_VIA)
+ if (to_pci_dev(uhci_dev(uhci))->vendor == PCI_VENDOR_ID_VIA ||
+ to_pci_dev(uhci_dev(uhci))->vendor == PCI_VENDOR_ID_ZHAOXIN)
uhci->oc_low = 1;
/* HP's server management chip requires a longer port reset delay. */
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index ddb79f23fb3b..79b3691f373f 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -13,6 +13,7 @@
#include <linux/module.h>
#include <linux/acpi.h>
#include <linux/reset.h>
+#include <linux/suspend.h>
#include "xhci.h"
#include "xhci-trace.h"
@@ -387,7 +388,7 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
if (pdev->vendor == PCI_VENDOR_ID_AMD &&
pdev->device == PCI_DEVICE_ID_AMD_RENOIR_XHCI)
- xhci->quirks |= XHCI_BROKEN_D3COLD;
+ xhci->quirks |= XHCI_BROKEN_D3COLD_S2I;
if (pdev->vendor == PCI_VENDOR_ID_INTEL) {
xhci->quirks |= XHCI_LPM_SUPPORT;
@@ -801,9 +802,16 @@ static int xhci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup)
* Systems with the TI redriver that loses port status change events
* need to have the registers polled during D3, so avoid D3cold.
*/
- if (xhci->quirks & (XHCI_COMP_MODE_QUIRK | XHCI_BROKEN_D3COLD))
+ if (xhci->quirks & XHCI_COMP_MODE_QUIRK)
pci_d3cold_disable(pdev);
+#ifdef CONFIG_SUSPEND
+ /* d3cold is broken, but only when s2idle is used */
+ if (pm_suspend_target_state == PM_SUSPEND_TO_IDLE &&
+ xhci->quirks & (XHCI_BROKEN_D3COLD_S2I))
+ pci_d3cold_disable(pdev);
+#endif
+
if (xhci->quirks & XHCI_PME_STUCK_QUIRK)
xhci_pme_quirk(hcd);
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 1ad12d5a4857..2bc82b3a2f98 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -276,6 +276,26 @@ static void inc_enq(struct xhci_hcd *xhci, struct xhci_ring *ring,
trace_xhci_inc_enq(ring);
}
+static int xhci_num_trbs_to(struct xhci_segment *start_seg, union xhci_trb *start,
+ struct xhci_segment *end_seg, union xhci_trb *end,
+ unsigned int num_segs)
+{
+ union xhci_trb *last_on_seg;
+ int num = 0;
+ int i = 0;
+
+ do {
+ if (start_seg == end_seg && end >= start)
+ return num + (end - start);
+ last_on_seg = &start_seg->trbs[TRBS_PER_SEGMENT - 1];
+ num += last_on_seg - start;
+ start_seg = start_seg->next;
+ start = start_seg->trbs;
+ } while (i++ <= num_segs);
+
+ return -EINVAL;
+}
+
/*
* Check to see if there's room to enqueue num_trbs on the ring and make sure
* enqueue pointer will not advance into dequeue segment. See rules above.
@@ -2140,6 +2160,7 @@ static int finish_td(struct xhci_hcd *xhci, struct xhci_virt_ep *ep,
u32 trb_comp_code)
{
struct xhci_ep_ctx *ep_ctx;
+ int trbs_freed;
ep_ctx = xhci_get_ep_ctx(xhci, ep->vdev->out_ctx, ep->ep_index);
@@ -2209,9 +2230,15 @@ static int finish_td(struct xhci_hcd *xhci, struct xhci_virt_ep *ep,
}
/* Update ring dequeue pointer */
+ trbs_freed = xhci_num_trbs_to(ep_ring->deq_seg, ep_ring->dequeue,
+ td->last_trb_seg, td->last_trb,
+ ep_ring->num_segs);
+ if (trbs_freed < 0)
+ xhci_dbg(xhci, "Failed to count freed trbs at TD finish\n");
+ else
+ ep_ring->num_trbs_free += trbs_freed;
ep_ring->dequeue = td->last_trb;
ep_ring->deq_seg = td->last_trb_seg;
- ep_ring->num_trbs_free += td->num_trbs - 1;
inc_deq(xhci, ep_ring);
return xhci_td_cleanup(xhci, td, ep_ring, td->status);
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 08d721921b7b..6b690ec91ff3 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1901,7 +1901,7 @@ struct xhci_hcd {
#define XHCI_DISABLE_SPARSE BIT_ULL(38)
#define XHCI_SG_TRB_CACHE_SIZE_QUIRK BIT_ULL(39)
#define XHCI_NO_SOFT_RETRY BIT_ULL(40)
-#define XHCI_BROKEN_D3COLD BIT_ULL(41)
+#define XHCI_BROKEN_D3COLD_S2I BIT_ULL(41)
#define XHCI_EP_CTX_BROKEN_DCS BIT_ULL(42)
#define XHCI_SUSPEND_RESUME_CLKS BIT_ULL(43)
#define XHCI_RESET_TO_DEFAULT BIT_ULL(44)