summaryrefslogtreecommitdiff
path: root/drivers/usb/host
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/host')
-rw-r--r--drivers/usb/host/ohci-q.c7
-rw-r--r--drivers/usb/host/ohci-tmio.c2
-rw-r--r--drivers/usb/host/xhci-hub.c22
-rw-r--r--drivers/usb/host/xhci-mem.c5
-rw-r--r--drivers/usb/host/xhci-pci.c57
-rw-r--r--drivers/usb/host/xhci-ring.c5
-rw-r--r--drivers/usb/host/xhci.c3
-rw-r--r--drivers/usb/host/xhci.h1
8 files changed, 83 insertions, 19 deletions
diff --git a/drivers/usb/host/ohci-q.c b/drivers/usb/host/ohci-q.c
index f7d561ed3c23..d029bbe9eb36 100644
--- a/drivers/usb/host/ohci-q.c
+++ b/drivers/usb/host/ohci-q.c
@@ -981,10 +981,6 @@ rescan_all:
int completed, modified;
__hc32 *prev;
- /* Is this ED already invisible to the hardware? */
- if (ed->state == ED_IDLE)
- goto ed_idle;
-
/* only take off EDs that the HC isn't using, accounting for
* frame counter wraps and EDs with partially retired TDs
*/
@@ -1012,12 +1008,10 @@ skip_ed:
}
/* ED's now officially unlinked, hc doesn't see */
- ed->state = ED_IDLE;
ed->hwHeadP &= ~cpu_to_hc32(ohci, ED_H);
ed->hwNextED = 0;
wmb();
ed->hwINFO &= ~cpu_to_hc32(ohci, ED_SKIP | ED_DEQUEUE);
-ed_idle:
/* reentrancy: if we drop the schedule lock, someone might
* have modified this list. normally it's just prepending
@@ -1088,6 +1082,7 @@ rescan_this:
if (list_empty(&ed->td_list)) {
*last = ed->ed_next;
ed->ed_next = NULL;
+ ed->state = ED_IDLE;
list_del(&ed->in_use_list);
} else if (ohci->rh_state == OHCI_RH_RUNNING) {
*last = ed->ed_next;
diff --git a/drivers/usb/host/ohci-tmio.c b/drivers/usb/host/ohci-tmio.c
index e9a6eec39142..cfcfadfc94fc 100644
--- a/drivers/usb/host/ohci-tmio.c
+++ b/drivers/usb/host/ohci-tmio.c
@@ -58,7 +58,7 @@
#define CCR_PM_CKRNEN 0x0002
#define CCR_PM_USBPW1 0x0004
#define CCR_PM_USBPW2 0x0008
-#define CCR_PM_USBPW3 0x0008
+#define CCR_PM_USBPW3 0x0010
#define CCR_PM_PMEE 0x0100
#define CCR_PM_PMES 0x8000
diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index e75c565feb53..78241b5550df 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -484,10 +484,13 @@ static void xhci_hub_report_usb3_link_state(struct xhci_hcd *xhci,
u32 pls = status_reg & PORT_PLS_MASK;
/* resume state is a xHCI internal state.
- * Do not report it to usb core.
+ * Do not report it to usb core, instead, pretend to be U3,
+ * thus usb core knows it's not ready for transfer
*/
- if (pls == XDEV_RESUME)
+ if (pls == XDEV_RESUME) {
+ *status |= USB_SS_PORT_LS_U3;
return;
+ }
/* When the CAS bit is set then warm reset
* should be performed on port
@@ -588,7 +591,14 @@ static u32 xhci_get_port_status(struct usb_hcd *hcd,
status |= USB_PORT_STAT_C_RESET << 16;
/* USB3.0 only */
if (hcd->speed == HCD_USB3) {
- if ((raw_port_status & PORT_PLC))
+ /* Port link change with port in resume state should not be
+ * reported to usbcore, as this is an internal state to be
+ * handled by xhci driver. Reporting PLC to usbcore may
+ * cause usbcore clearing PLC first and port change event
+ * irq won't be generated.
+ */
+ if ((raw_port_status & PORT_PLC) &&
+ (raw_port_status & PORT_PLS_MASK) != XDEV_RESUME)
status |= USB_PORT_STAT_C_LINK_STATE << 16;
if ((raw_port_status & PORT_WRC))
status |= USB_PORT_STAT_C_BH_RESET << 16;
@@ -1120,10 +1130,10 @@ int xhci_bus_suspend(struct usb_hcd *hcd)
spin_lock_irqsave(&xhci->lock, flags);
if (hcd->self.root_hub->do_remote_wakeup) {
- if (bus_state->resuming_ports) {
+ if (bus_state->resuming_ports || /* USB2 */
+ bus_state->port_remote_wakeup) { /* USB3 */
spin_unlock_irqrestore(&xhci->lock, flags);
- xhci_dbg(xhci, "suspend failed because "
- "a port is resuming\n");
+ xhci_dbg(xhci, "suspend failed because a port is resuming\n");
return -EBUSY;
}
}
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index f8336408ef07..9a8c936cd42c 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -1427,10 +1427,10 @@ int xhci_endpoint_init(struct xhci_hcd *xhci,
/* Attempt to use the ring cache */
if (virt_dev->num_rings_cached == 0)
return -ENOMEM;
+ virt_dev->num_rings_cached--;
virt_dev->eps[ep_index].new_ring =
virt_dev->ring_cache[virt_dev->num_rings_cached];
virt_dev->ring_cache[virt_dev->num_rings_cached] = NULL;
- virt_dev->num_rings_cached--;
xhci_reinit_cached_ring(xhci, virt_dev->eps[ep_index].new_ring,
1, type);
}
@@ -1792,7 +1792,8 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci)
int size;
int i, j, num_ports;
- del_timer_sync(&xhci->cmd_timer);
+ if (timer_pending(&xhci->cmd_timer))
+ del_timer_sync(&xhci->cmd_timer);
/* Free the Event Ring Segment Table and the actual Event Ring */
size = sizeof(struct xhci_erst_entry)*(xhci->erst.num_entries);
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index 4a4cb1d91ac8..5590eac2b22d 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -23,10 +23,15 @@
#include <linux/pci.h>
#include <linux/slab.h>
#include <linux/module.h>
+#include <linux/acpi.h>
#include "xhci.h"
#include "xhci-trace.h"
+#define PORT2_SSIC_CONFIG_REG2 0x883c
+#define PROG_DONE (1 << 30)
+#define SSIC_PORT_UNUSED (1 << 31)
+
/* Device for a quirk */
#define PCI_VENDOR_ID_FRESCO_LOGIC 0x1b73
#define PCI_DEVICE_ID_FRESCO_LOGIC_PDK 0x1000
@@ -176,20 +181,63 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
}
/*
+ * In some Intel xHCI controllers, in order to get D3 working,
+ * through a vendor specific SSIC CONFIG register at offset 0x883c,
+ * SSIC PORT need to be marked as "unused" before putting xHCI
+ * into D3. After D3 exit, the SSIC port need to be marked as "used".
+ * Without this change, xHCI might not enter D3 state.
* Make sure PME works on some Intel xHCI controllers by writing 1 to clear
* the Internal PME flag bit in vendor specific PMCTRL register at offset 0x80a4
*/
-static void xhci_pme_quirk(struct xhci_hcd *xhci)
+static void xhci_pme_quirk(struct usb_hcd *hcd, bool suspend)
{
+ struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+ struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
u32 val;
void __iomem *reg;
+ if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
+ pdev->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI) {
+
+ reg = (void __iomem *) xhci->cap_regs + PORT2_SSIC_CONFIG_REG2;
+
+ /* Notify SSIC that SSIC profile programming is not done */
+ val = readl(reg) & ~PROG_DONE;
+ writel(val, reg);
+
+ /* Mark SSIC port as unused(suspend) or used(resume) */
+ val = readl(reg);
+ if (suspend)
+ val |= SSIC_PORT_UNUSED;
+ else
+ val &= ~SSIC_PORT_UNUSED;
+ writel(val, reg);
+
+ /* Notify SSIC that SSIC profile programming is done */
+ val = readl(reg) | PROG_DONE;
+ writel(val, reg);
+ readl(reg);
+ }
+
reg = (void __iomem *) xhci->cap_regs + 0x80a4;
val = readl(reg);
writel(val | BIT(28), reg);
readl(reg);
}
+#ifdef CONFIG_ACPI
+static void xhci_pme_acpi_rtd3_enable(struct pci_dev *dev)
+{
+ static const u8 intel_dsm_uuid[] = {
+ 0xb7, 0x0c, 0x34, 0xac, 0x01, 0xe9, 0xbf, 0x45,
+ 0xb7, 0xe6, 0x2b, 0x34, 0xec, 0x93, 0x1e, 0x23,
+ };
+ acpi_evaluate_dsm(ACPI_HANDLE(&dev->dev), intel_dsm_uuid, 3, 1, NULL);
+}
+#else
+ static void xhci_pme_acpi_rtd3_enable(struct pci_dev *dev) { }
+#endif /* CONFIG_ACPI */
+
/* called during probe() after chip reset completes */
static int xhci_pci_setup(struct usb_hcd *hcd)
{
@@ -263,6 +311,9 @@ static int xhci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
HCC_MAX_PSA(xhci->hcc_params) >= 4)
xhci->shared_hcd->can_do_streams = 1;
+ if (xhci->quirks & XHCI_PME_STUCK_QUIRK)
+ xhci_pme_acpi_rtd3_enable(dev);
+
/* USB-2 and USB-3 roothubs initialized, allow runtime pm suspend */
pm_runtime_put_noidle(&dev->dev);
@@ -307,7 +358,7 @@ static int xhci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup)
pdev->no_d3cold = true;
if (xhci->quirks & XHCI_PME_STUCK_QUIRK)
- xhci_pme_quirk(xhci);
+ xhci_pme_quirk(hcd, true);
return xhci_suspend(xhci, do_wakeup);
}
@@ -340,7 +391,7 @@ static int xhci_pci_resume(struct usb_hcd *hcd, bool hibernated)
usb_enable_intel_xhci_ports(pdev);
if (xhci->quirks & XHCI_PME_STUCK_QUIRK)
- xhci_pme_quirk(xhci);
+ xhci_pme_quirk(hcd, false);
retval = xhci_resume(xhci, hibernated);
return retval;
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 94416ff70810..32f4d564494a 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -82,7 +82,7 @@ dma_addr_t xhci_trb_virt_to_dma(struct xhci_segment *seg,
return 0;
/* offset in TRBs */
segment_offset = trb - seg->trbs;
- if (segment_offset > TRBS_PER_SEGMENT)
+ if (segment_offset >= TRBS_PER_SEGMENT)
return 0;
return seg->dma + (segment_offset * sizeof(*trb));
}
@@ -1546,6 +1546,9 @@ static void handle_port_status(struct xhci_hcd *xhci,
usb_hcd_resume_root_hub(hcd);
}
+ if (hcd->speed == HCD_USB3 && (temp & PORT_PLS_MASK) == XDEV_INACTIVE)
+ bus_state->port_remote_wakeup &= ~(1 << faked_port_index);
+
if ((temp & PORT_PLC) && (temp & PORT_PLS_MASK) == XDEV_RESUME) {
xhci_dbg(xhci, "port resume event for port %d\n", port_id);
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 7da0d6043d33..526ebc0c7e72 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -3453,6 +3453,9 @@ int xhci_discover_or_reset_device(struct usb_hcd *hcd, struct usb_device *udev)
return -EINVAL;
}
+ if (virt_dev->tt_info)
+ old_active_eps = virt_dev->tt_info->active_eps;
+
if (virt_dev->udev != udev) {
/* If the virt_dev and the udev does not match, this virt_dev
* may belong to another udev.
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 31e46cc55807..ed2ebf647c38 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -285,6 +285,7 @@ struct xhci_op_regs {
#define XDEV_U0 (0x0 << 5)
#define XDEV_U2 (0x2 << 5)
#define XDEV_U3 (0x3 << 5)
+#define XDEV_INACTIVE (0x6 << 5)
#define XDEV_RESUME (0xf << 5)
/* true: port has power (see HCC_PPC) */
#define PORT_POWER (1 << 9)
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-06 08:57:35 +0300