summaryrefslogtreecommitdiff
path: root/drivers/usb/host
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/host')
-rw-r--r--drivers/usb/host/ehci-dbg.c2
-rw-r--r--drivers/usb/host/ehci-hcd.c10
-rw-r--r--drivers/usb/host/ehci-mem.c26
-rw-r--r--drivers/usb/host/ehci-pci.c25
-rw-r--r--drivers/usb/host/ehci-sched.c21
-rw-r--r--drivers/usb/host/ehci.h2
-rw-r--r--drivers/usb/host/isp1362-hcd.c3
-rw-r--r--drivers/usb/host/uhci-debug.c1
-rw-r--r--drivers/usb/host/xhci-hub.c7
-rw-r--r--drivers/usb/host/xhci-mem.c173
-rw-r--r--drivers/usb/host/xhci-ring.c1
-rw-r--r--drivers/usb/host/xhci.c91
-rw-r--r--drivers/usb/host/xhci.h31
13 files changed, 366 insertions, 27 deletions
diff --git a/drivers/usb/host/ehci-dbg.c b/drivers/usb/host/ehci-dbg.c
index 86afdc73322f..6e2599661b5b 100644
--- a/drivers/usb/host/ehci-dbg.c
+++ b/drivers/usb/host/ehci-dbg.c
@@ -1067,7 +1067,7 @@ static inline void create_debug_files (struct ehci_hcd *ehci)
&debug_registers_fops))
goto file_error;
- if (!debugfs_create_file("lpm", S_IRUGO|S_IWUGO, ehci->debug_dir, bus,
+ if (!debugfs_create_file("lpm", S_IRUGO|S_IWUSR, ehci->debug_dir, bus,
&debug_lpm_fops))
goto file_error;
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 502a7e6fef42..e9062806d4a2 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -1063,10 +1063,11 @@ rescan:
tmp && tmp != qh;
tmp = tmp->qh_next.qh)
continue;
- /* periodic qh self-unlinks on empty */
- if (!tmp)
- goto nogood;
- unlink_async (ehci, qh);
+ /* periodic qh self-unlinks on empty, and a COMPLETING qh
+ * may already be unlinked.
+ */
+ if (tmp)
+ unlink_async(ehci, qh);
/* FALL THROUGH */
case QH_STATE_UNLINK: /* wait for hw to finish? */
case QH_STATE_UNLINK_WAIT:
@@ -1083,7 +1084,6 @@ idle_timeout:
}
/* else FALL THROUGH */
default:
-nogood:
/* caller was supposed to have unlinked any requests;
* that's not our job. just leak this memory.
*/
diff --git a/drivers/usb/host/ehci-mem.c b/drivers/usb/host/ehci-mem.c
index d36e4e75e08d..12f70c302b0b 100644
--- a/drivers/usb/host/ehci-mem.c
+++ b/drivers/usb/host/ehci-mem.c
@@ -141,6 +141,10 @@ static void ehci_mem_cleanup (struct ehci_hcd *ehci)
qh_put (ehci->async);
ehci->async = NULL;
+ if (ehci->dummy)
+ qh_put(ehci->dummy);
+ ehci->dummy = NULL;
+
/* DMA consistent memory and pools */
if (ehci->qtd_pool)
dma_pool_destroy (ehci->qtd_pool);
@@ -227,8 +231,26 @@ static int ehci_mem_init (struct ehci_hcd *ehci, gfp_t flags)
if (ehci->periodic == NULL) {
goto fail;
}
- for (i = 0; i < ehci->periodic_size; i++)
- ehci->periodic [i] = EHCI_LIST_END(ehci);
+
+ if (ehci->use_dummy_qh) {
+ struct ehci_qh_hw *hw;
+ ehci->dummy = ehci_qh_alloc(ehci, flags);
+ if (!ehci->dummy)
+ goto fail;
+
+ hw = ehci->dummy->hw;
+ hw->hw_next = EHCI_LIST_END(ehci);
+ hw->hw_qtd_next = EHCI_LIST_END(ehci);
+ hw->hw_alt_next = EHCI_LIST_END(ehci);
+ hw->hw_token &= ~QTD_STS_ACTIVE;
+ ehci->dummy->hw = hw;
+
+ for (i = 0; i < ehci->periodic_size; i++)
+ ehci->periodic[i] = ehci->dummy->qh_dma;
+ } else {
+ for (i = 0; i < ehci->periodic_size; i++)
+ ehci->periodic[i] = EHCI_LIST_END(ehci);
+ }
/* software shadow of hardware table */
ehci->pshadow = kcalloc(ehci->periodic_size, sizeof(void *), flags);
diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
index a1e8d273103f..655f3c9f88bf 100644
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -103,6 +103,19 @@ static int ehci_pci_setup(struct usb_hcd *hcd)
if (retval)
return retval;
+ if ((pdev->vendor == PCI_VENDOR_ID_AMD && pdev->device == 0x7808) ||
+ (pdev->vendor == PCI_VENDOR_ID_ATI && pdev->device == 0x4396)) {
+ /* EHCI controller on AMD SB700/SB800/Hudson-2/3 platforms may
+ * read/write memory space which does not belong to it when
+ * there is NULL pointer with T-bit set to 1 in the frame list
+ * table. To avoid the issue, the frame list link pointer
+ * should always contain a valid pointer to a inactive qh.
+ */
+ ehci->use_dummy_qh = 1;
+ ehci_info(ehci, "applying AMD SB700/SB800/Hudson-2/3 EHCI "
+ "dummy qh workaround\n");
+ }
+
/* data structure init */
retval = ehci_init(hcd);
if (retval)
@@ -148,6 +161,18 @@ static int ehci_pci_setup(struct usb_hcd *hcd)
if (pdev->revision < 0xa4)
ehci->no_selective_suspend = 1;
break;
+
+ /* MCP89 chips on the MacBookAir3,1 give EPROTO when
+ * fetching device descriptors unless LPM is disabled.
+ * There are also intermittent problems enumerating
+ * devices with PPCD enabled.
+ */
+ case 0x0d9d:
+ ehci_info(ehci, "disable lpm/ppcd for nvidia mcp89");
+ ehci->has_lpm = 0;
+ ehci->has_ppcd = 0;
+ ehci->command &= ~CMD_PPCEE;
+ break;
}
break;
case PCI_VENDOR_ID_VIA:
diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c
index a92526d6e5ae..d9f78eb26572 100644
--- a/drivers/usb/host/ehci-sched.c
+++ b/drivers/usb/host/ehci-sched.c
@@ -98,7 +98,14 @@ static void periodic_unlink (struct ehci_hcd *ehci, unsigned frame, void *ptr)
*/
*prev_p = *periodic_next_shadow(ehci, &here,
Q_NEXT_TYPE(ehci, *hw_p));
- *hw_p = *shadow_next_periodic(ehci, &here, Q_NEXT_TYPE(ehci, *hw_p));
+
+ if (!ehci->use_dummy_qh ||
+ *shadow_next_periodic(ehci, &here, Q_NEXT_TYPE(ehci, *hw_p))
+ != EHCI_LIST_END(ehci))
+ *hw_p = *shadow_next_periodic(ehci, &here,
+ Q_NEXT_TYPE(ehci, *hw_p));
+ else
+ *hw_p = ehci->dummy->qh_dma;
}
/* how many of the uframe's 125 usecs are allocated? */
@@ -2335,7 +2342,11 @@ restart:
* pointer for much longer, if at all.
*/
*q_p = q.itd->itd_next;
- *hw_p = q.itd->hw_next;
+ if (!ehci->use_dummy_qh ||
+ q.itd->hw_next != EHCI_LIST_END(ehci))
+ *hw_p = q.itd->hw_next;
+ else
+ *hw_p = ehci->dummy->qh_dma;
type = Q_NEXT_TYPE(ehci, q.itd->hw_next);
wmb();
modified = itd_complete (ehci, q.itd);
@@ -2368,7 +2379,11 @@ restart:
* URB completion.
*/
*q_p = q.sitd->sitd_next;
- *hw_p = q.sitd->hw_next;
+ if (!ehci->use_dummy_qh ||
+ q.sitd->hw_next != EHCI_LIST_END(ehci))
+ *hw_p = q.sitd->hw_next;
+ else
+ *hw_p = ehci->dummy->qh_dma;
type = Q_NEXT_TYPE(ehci, q.sitd->hw_next);
wmb();
modified = sitd_complete (ehci, q.sitd);
diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h
index bde823f704e9..ba8eab366b82 100644
--- a/drivers/usb/host/ehci.h
+++ b/drivers/usb/host/ehci.h
@@ -73,6 +73,7 @@ struct ehci_hcd { /* one per controller */
/* async schedule support */
struct ehci_qh *async;
+ struct ehci_qh *dummy; /* For AMD quirk use */
struct ehci_qh *reclaim;
unsigned scanning : 1;
@@ -131,6 +132,7 @@ struct ehci_hcd { /* one per controller */
unsigned need_io_watchdog:1;
unsigned broken_periodic:1;
unsigned fs_i_thresh:1; /* Intel iso scheduling */
+ unsigned use_dummy_qh:1; /* AMD Frame List table quirk*/
/* required for usb32 quirk */
#define OHCI_CTRL_HCFS (3 << 6)
diff --git a/drivers/usb/host/isp1362-hcd.c b/drivers/usb/host/isp1362-hcd.c
index 8196fa11fec4..43a39eb56cc6 100644
--- a/drivers/usb/host/isp1362-hcd.c
+++ b/drivers/usb/host/isp1362-hcd.c
@@ -70,7 +70,6 @@
#include <linux/ioport.h>
#include <linux/sched.h>
#include <linux/slab.h>
-#include <linux/smp_lock.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/list.h>
@@ -2684,7 +2683,7 @@ static int __devexit isp1362_remove(struct platform_device *pdev)
return 0;
}
-static int __init isp1362_probe(struct platform_device *pdev)
+static int __devinit isp1362_probe(struct platform_device *pdev)
{
struct usb_hcd *hcd;
struct isp1362_hcd *isp1362_hcd;
diff --git a/drivers/usb/host/uhci-debug.c b/drivers/usb/host/uhci-debug.c
index 6e7fb5f38db6..ee60cd3ea642 100644
--- a/drivers/usb/host/uhci-debug.c
+++ b/drivers/usb/host/uhci-debug.c
@@ -12,7 +12,6 @@
#include <linux/slab.h>
#include <linux/kernel.h>
#include <linux/debugfs.h>
-#include <linux/smp_lock.h>
#include <asm/io.h>
#include "uhci-hcd.h"
diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index fef5a1f9d483..5d963e350494 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -229,6 +229,13 @@ void xhci_ring_device(struct xhci_hcd *xhci, int slot_id)
static void xhci_disable_port(struct xhci_hcd *xhci, u16 wIndex,
u32 __iomem *addr, u32 port_status)
{
+ /* Don't allow the USB core to disable SuperSpeed ports. */
+ if (xhci->port_array[wIndex] == 0x03) {
+ xhci_dbg(xhci, "Ignoring request to disable "
+ "SuperSpeed port.\n");
+ return;
+ }
+
/* Write 1 to disable the port */
xhci_writel(xhci, port_status | PORT_PE, addr);
port_status = xhci_readl(xhci, addr);
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index 202770676da3..1d0f45f0e7a6 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -1045,7 +1045,7 @@ static inline u32 xhci_get_max_esit_payload(struct xhci_hcd *xhci,
if (udev->speed == USB_SPEED_SUPER)
return ep->ss_ep_comp.wBytesPerInterval;
- max_packet = ep->desc.wMaxPacketSize & 0x3ff;
+ max_packet = GET_MAX_PACKET(ep->desc.wMaxPacketSize);
max_burst = (ep->desc.wMaxPacketSize & 0x1800) >> 11;
/* A 0 in max burst means 1 transfer per ESIT */
return max_packet * (max_burst + 1);
@@ -1135,7 +1135,7 @@ int xhci_endpoint_init(struct xhci_hcd *xhci,
/* Fall through */
case USB_SPEED_FULL:
case USB_SPEED_LOW:
- max_packet = ep->desc.wMaxPacketSize & 0x3ff;
+ max_packet = GET_MAX_PACKET(ep->desc.wMaxPacketSize);
ep_ctx->ep_info2 |= MAX_PACKET(max_packet);
break;
default:
@@ -1443,6 +1443,13 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci)
xhci->dcbaa = NULL;
scratchpad_free(xhci);
+
+ xhci->num_usb2_ports = 0;
+ xhci->num_usb3_ports = 0;
+ kfree(xhci->usb2_ports);
+ kfree(xhci->usb3_ports);
+ kfree(xhci->port_array);
+
xhci->page_size = 0;
xhci->page_shift = 0;
xhci->bus_suspended = 0;
@@ -1627,6 +1634,166 @@ static void xhci_set_hc_event_deq(struct xhci_hcd *xhci)
&xhci->ir_set->erst_dequeue);
}
+static void xhci_add_in_port(struct xhci_hcd *xhci, unsigned int num_ports,
+ u32 __iomem *addr, u8 major_revision)
+{
+ u32 temp, port_offset, port_count;
+ int i;
+
+ if (major_revision > 0x03) {
+ xhci_warn(xhci, "Ignoring unknown port speed, "
+ "Ext Cap %p, revision = 0x%x\n",
+ addr, major_revision);
+ /* Ignoring port protocol we can't understand. FIXME */
+ return;
+ }
+
+ /* Port offset and count in the third dword, see section 7.2 */
+ temp = xhci_readl(xhci, addr + 2);
+ port_offset = XHCI_EXT_PORT_OFF(temp);
+ port_count = XHCI_EXT_PORT_COUNT(temp);
+ xhci_dbg(xhci, "Ext Cap %p, port offset = %u, "
+ "count = %u, revision = 0x%x\n",
+ addr, port_offset, port_count, major_revision);
+ /* Port count includes the current port offset */
+ if (port_offset == 0 || (port_offset + port_count - 1) > num_ports)
+ /* WTF? "Valid values are ‘1’ to MaxPorts" */
+ return;
+ port_offset--;
+ for (i = port_offset; i < (port_offset + port_count); i++) {
+ /* Duplicate entry. Ignore the port if the revisions differ. */
+ if (xhci->port_array[i] != 0) {
+ xhci_warn(xhci, "Duplicate port entry, Ext Cap %p,"
+ " port %u\n", addr, i);
+ xhci_warn(xhci, "Port was marked as USB %u, "
+ "duplicated as USB %u\n",
+ xhci->port_array[i], major_revision);
+ /* Only adjust the roothub port counts if we haven't
+ * found a similar duplicate.
+ */
+ if (xhci->port_array[i] != major_revision &&
+ xhci->port_array[i] != (u8) -1) {
+ if (xhci->port_array[i] == 0x03)
+ xhci->num_usb3_ports--;
+ else
+ xhci->num_usb2_ports--;
+ xhci->port_array[i] = (u8) -1;
+ }
+ /* FIXME: Should we disable the port? */
+ continue;
+ }
+ xhci->port_array[i] = major_revision;
+ if (major_revision == 0x03)
+ xhci->num_usb3_ports++;
+ else
+ xhci->num_usb2_ports++;
+ }
+ /* FIXME: Should we disable ports not in the Extended Capabilities? */
+}
+
+/*
+ * Scan the Extended Capabilities for the "Supported Protocol Capabilities" that
+ * specify what speeds each port is supposed to be. We can't count on the port
+ * speed bits in the PORTSC register being correct until a device is connected,
+ * but we need to set up the two fake roothubs with the correct number of USB
+ * 3.0 and USB 2.0 ports at host controller initialization time.
+ */
+static int xhci_setup_port_arrays(struct xhci_hcd *xhci, gfp_t flags)
+{
+ u32 __iomem *addr;
+ u32 offset;
+ unsigned int num_ports;
+ int i, port_index;
+
+ addr = &xhci->cap_regs->hcc_params;
+ offset = XHCI_HCC_EXT_CAPS(xhci_readl(xhci, addr));
+ if (offset == 0) {
+ xhci_err(xhci, "No Extended Capability registers, "
+ "unable to set up roothub.\n");
+ return -ENODEV;
+ }
+
+ num_ports = HCS_MAX_PORTS(xhci->hcs_params1);
+ xhci->port_array = kzalloc(sizeof(*xhci->port_array)*num_ports, flags);
+ if (!xhci->port_array)
+ return -ENOMEM;
+
+ /*
+ * For whatever reason, the first capability offset is from the
+ * capability register base, not from the HCCPARAMS register.
+ * See section 5.3.6 for offset calculation.
+ */
+ addr = &xhci->cap_regs->hc_capbase + offset;
+ while (1) {
+ u32 cap_id;
+
+ cap_id = xhci_readl(xhci, addr);
+ if (XHCI_EXT_CAPS_ID(cap_id) == XHCI_EXT_CAPS_PROTOCOL)
+ xhci_add_in_port(xhci, num_ports, addr,
+ (u8) XHCI_EXT_PORT_MAJOR(cap_id));
+ offset = XHCI_EXT_CAPS_NEXT(cap_id);
+ if (!offset || (xhci->num_usb2_ports + xhci->num_usb3_ports)
+ == num_ports)
+ break;
+ /*
+ * Once you're into the Extended Capabilities, the offset is
+ * always relative to the register holding the offset.
+ */
+ addr += offset;
+ }
+
+ if (xhci->num_usb2_ports == 0 && xhci->num_usb3_ports == 0) {
+ xhci_warn(xhci, "No ports on the roothubs?\n");
+ return -ENODEV;
+ }
+ xhci_dbg(xhci, "Found %u USB 2.0 ports and %u USB 3.0 ports.\n",
+ xhci->num_usb2_ports, xhci->num_usb3_ports);
+ /*
+ * Note we could have all USB 3.0 ports, or all USB 2.0 ports.
+ * Not sure how the USB core will handle a hub with no ports...
+ */
+ if (xhci->num_usb2_ports) {
+ xhci->usb2_ports = kmalloc(sizeof(*xhci->usb2_ports)*
+ xhci->num_usb2_ports, flags);
+ if (!xhci->usb2_ports)
+ return -ENOMEM;
+
+ port_index = 0;
+ for (i = 0; i < num_ports; i++) {
+ if (xhci->port_array[i] == 0x03 ||
+ xhci->port_array[i] == 0 ||
+ xhci->port_array[i] == -1)
+ continue;
+
+ xhci->usb2_ports[port_index] =
+ &xhci->op_regs->port_status_base +
+ NUM_PORT_REGS*i;
+ xhci_dbg(xhci, "USB 2.0 port at index %u, "
+ "addr = %p\n", i,
+ xhci->usb2_ports[port_index]);
+ port_index++;
+ }
+ }
+ if (xhci->num_usb3_ports) {
+ xhci->usb3_ports = kmalloc(sizeof(*xhci->usb3_ports)*
+ xhci->num_usb3_ports, flags);
+ if (!xhci->usb3_ports)
+ return -ENOMEM;
+
+ port_index = 0;
+ for (i = 0; i < num_ports; i++)
+ if (xhci->port_array[i] == 0x03) {
+ xhci->usb3_ports[port_index] =
+ &xhci->op_regs->port_status_base +
+ NUM_PORT_REGS*i;
+ xhci_dbg(xhci, "USB 3.0 port at index %u, "
+ "addr = %p\n", i,
+ xhci->usb3_ports[port_index]);
+ port_index++;
+ }
+ }
+ return 0;
+}
int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
{
@@ -1809,6 +1976,8 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
if (scratchpad_alloc(xhci, flags))
goto fail;
+ if (xhci_setup_port_arrays(xhci, flags))
+ goto fail;
return 0;
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 9f3115e729b1..df558f6f84e3 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -2104,7 +2104,6 @@ irqreturn_t xhci_irq(struct usb_hcd *hcd)
if (!(status & STS_EINT)) {
spin_unlock(&xhci->lock);
- xhci_warn(xhci, "Spurious interrupt.\n");
return IRQ_NONE;
}
xhci_dbg(xhci, "op reg status = %08x\n", status);
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 5d7d4e951ea4..45e4a3108cc3 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -577,6 +577,65 @@ static void xhci_restore_registers(struct xhci_hcd *xhci)
xhci_write_64(xhci, xhci->s3.erst_base, &xhci->ir_set->erst_base);
}
+static void xhci_set_cmd_ring_deq(struct xhci_hcd *xhci)
+{
+ u64 val_64;
+
+ /* step 2: initialize command ring buffer */
+ val_64 = xhci_read_64(xhci, &xhci->op_regs->cmd_ring);
+ val_64 = (val_64 & (u64) CMD_RING_RSVD_BITS) |
+ (xhci_trb_virt_to_dma(xhci->cmd_ring->deq_seg,
+ xhci->cmd_ring->dequeue) &
+ (u64) ~CMD_RING_RSVD_BITS) |
+ xhci->cmd_ring->cycle_state;
+ xhci_dbg(xhci, "// Setting command ring address to 0x%llx\n",
+ (long unsigned long) val_64);
+ xhci_write_64(xhci, val_64, &xhci->op_regs->cmd_ring);
+}
+
+/*
+ * The whole command ring must be cleared to zero when we suspend the host.
+ *
+ * The host doesn't save the command ring pointer in the suspend well, so we
+ * need to re-program it on resume. Unfortunately, the pointer must be 64-byte
+ * aligned, because of the reserved bits in the command ring dequeue pointer
+ * register. Therefore, we can't just set the dequeue pointer back in the
+ * middle of the ring (TRBs are 16-byte aligned).
+ */
+static void xhci_clear_command_ring(struct xhci_hcd *xhci)
+{
+ struct xhci_ring *ring;
+ struct xhci_segment *seg;
+
+ ring = xhci->cmd_ring;
+ seg = ring->deq_seg;
+ do {
+ memset(seg->trbs, 0, SEGMENT_SIZE);
+ seg = seg->next;
+ } while (seg != ring->deq_seg);
+
+ /* Reset the software enqueue and dequeue pointers */
+ ring->deq_seg = ring->first_seg;
+ ring->dequeue = ring->first_seg->trbs;
+ ring->enq_seg = ring->deq_seg;
+ ring->enqueue = ring->dequeue;
+
+ /*
+ * Ring is now zeroed, so the HW should look for change of ownership
+ * when the cycle bit is set to 1.
+ */
+ ring->cycle_state = 1;
+
+ /*
+ * Reset the hardware dequeue pointer.
+ * Yes, this will need to be re-written after resume, but we're paranoid
+ * and want to make sure the hardware doesn't access bogus memory
+ * because, say, the BIOS or an SMI started the host without changing
+ * the command ring pointers.
+ */
+ xhci_set_cmd_ring_deq(xhci);
+}
+
/*
* Stop HC (not bus-specific)
*
@@ -604,6 +663,7 @@ int xhci_suspend(struct xhci_hcd *xhci)
spin_unlock_irq(&xhci->lock);
return -ETIMEDOUT;
}
+ xhci_clear_command_ring(xhci);
/* step 3: save registers */
xhci_save_registers(xhci);
@@ -635,7 +695,6 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
u32 command, temp = 0;
struct usb_hcd *hcd = xhci_to_hcd(xhci);
struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
- u64 val_64;
int old_state, retval;
old_state = hcd->state;
@@ -648,15 +707,7 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
/* step 1: restore register */
xhci_restore_registers(xhci);
/* step 2: initialize command ring buffer */
- val_64 = xhci_read_64(xhci, &xhci->op_regs->cmd_ring);
- val_64 = (val_64 & (u64) CMD_RING_RSVD_BITS) |
- (xhci_trb_virt_to_dma(xhci->cmd_ring->deq_seg,
- xhci->cmd_ring->dequeue) &
- (u64) ~CMD_RING_RSVD_BITS) |
- xhci->cmd_ring->cycle_state;
- xhci_dbg(xhci, "// Setting command ring address to 0x%llx\n",
- (long unsigned long) val_64);
- xhci_write_64(xhci, val_64, &xhci->op_regs->cmd_ring);
+ xhci_set_cmd_ring_deq(xhci);
/* step 3: restore state and start state*/
/* step 3: set CRS flag */
command = xhci_readl(xhci, &xhci->op_regs->command);
@@ -714,6 +765,7 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
return retval;
}
+ spin_unlock_irq(&xhci->lock);
/* Re-setup MSI-X */
if (hcd->irq)
free_irq(hcd->irq, hcd);
@@ -736,6 +788,7 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
hcd->irq = pdev->irq;
}
+ spin_lock_irq(&xhci->lock);
/* step 4: set Run/Stop bit */
command = xhci_readl(xhci, &xhci->op_regs->command);
command |= CMD_RUN;
@@ -1496,6 +1549,15 @@ static int xhci_configure_endpoint(struct xhci_hcd *xhci,
cmd_completion = command->completion;
cmd_status = &command->status;
command->command_trb = xhci->cmd_ring->enqueue;
+
+ /* Enqueue pointer can be left pointing to the link TRB,
+ * we must handle that
+ */
+ if ((command->command_trb->link.control & TRB_TYPE_BITMASK)
+ == TRB_TYPE(TRB_LINK))
+ command->command_trb =
+ xhci->cmd_ring->enq_seg->next->trbs;
+
list_add_tail(&command->cmd_list, &virt_dev->cmd_list);
} else {
in_ctx = virt_dev->in_ctx;
@@ -2219,6 +2281,15 @@ int xhci_discover_or_reset_device(struct usb_hcd *hcd, struct usb_device *udev)
/* Attempt to submit the Reset Device command to the command ring */
spin_lock_irqsave(&xhci->lock, flags);
reset_device_cmd->command_trb = xhci->cmd_ring->enqueue;
+
+ /* Enqueue pointer can be left pointing to the link TRB,
+ * we must handle that
+ */
+ if ((reset_device_cmd->command_trb->link.control & TRB_TYPE_BITMASK)
+ == TRB_TYPE(TRB_LINK))
+ reset_device_cmd->command_trb =
+ xhci->cmd_ring->enq_seg->next->trbs;
+
list_add_tail(&reset_device_cmd->cmd_list, &virt_dev->cmd_list);
ret = xhci_queue_reset_device(xhci, slot_id);
if (ret) {
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 93d3bf4d213c..170c367112d2 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -454,6 +454,24 @@ struct xhci_doorbell_array {
/**
+ * struct xhci_protocol_caps
+ * @revision: major revision, minor revision, capability ID,
+ * and next capability pointer.
+ * @name_string: Four ASCII characters to say which spec this xHC
+ * follows, typically "USB ".
+ * @port_info: Port offset, count, and protocol-defined information.
+ */
+struct xhci_protocol_caps {
+ u32 revision;
+ u32 name_string;
+ u32 port_info;
+};
+
+#define XHCI_EXT_PORT_MAJOR(x) (((x) >> 24) & 0xff)
+#define XHCI_EXT_PORT_OFF(x) ((x) & 0xff)
+#define XHCI_EXT_PORT_COUNT(x) (((x) >> 8) & 0xff)
+
+/**
* struct xhci_container_ctx
* @type: Type of context. Used to calculated offsets to contained contexts.
* @size: Size of the context data
@@ -621,6 +639,11 @@ struct xhci_ep_ctx {
#define MAX_PACKET_MASK (0xffff << 16)
#define MAX_PACKET_DECODED(p) (((p) >> 16) & 0xffff)
+/* Get max packet size from ep desc. Bit 10..0 specify the max packet size.
+ * USB2.0 spec 9.6.6.
+ */
+#define GET_MAX_PACKET(p) ((p) & 0x7ff)
+
/* tx_info bitmasks */
#define AVG_TRB_LENGTH_FOR_EP(p) ((p) & 0xffff)
#define MAX_ESIT_PAYLOAD_FOR_EP(p) (((p) & 0xffff) << 16)
@@ -1235,6 +1258,14 @@ struct xhci_hcd {
u32 suspended_ports[8]; /* which ports are
suspended */
unsigned long resume_done[MAX_HC_PORTS];
+ /* Is each xHCI roothub port a USB 3.0, USB 2.0, or USB 1.1 port? */
+ u8 *port_array;
+ /* Array of pointers to USB 3.0 PORTSC registers */
+ u32 __iomem **usb3_ports;
+ unsigned int num_usb3_ports;
+ /* Array of pointers to USB 2.0 PORTSC registers */
+ u32 __iomem **usb2_ports;
+ unsigned int num_usb2_ports;
};
/* For testing purposes */
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-04 04:03:03 +0300