diff options
Diffstat (limited to 'drivers/usb/host')
| -rw-r--r-- | drivers/usb/host/ehci-omap.c | 167 | ||||
| -rw-r--r-- | drivers/usb/host/ehci-q.c | 12 | ||||
| -rw-r--r-- | drivers/usb/host/ehci-sead3.c | 2 | ||||
| -rw-r--r-- | drivers/usb/host/ehci-tegra.c | 3 | ||||
| -rw-r--r-- | drivers/usb/host/isp1362-hcd.c | 8 | ||||
| -rw-r--r-- | drivers/usb/host/ohci-at91.c | 10 | ||||
| -rw-r--r-- | drivers/usb/host/pci-quirks.c | 49 | ||||
| -rw-r--r-- | drivers/usb/host/pci-quirks.h | 2 | ||||
| -rw-r--r-- | drivers/usb/host/xhci-hub.c | 42 | ||||
| -rw-r--r-- | drivers/usb/host/xhci-pci.c | 10 | ||||
| -rw-r--r-- | drivers/usb/host/xhci-plat.c | 2 | ||||
| -rw-r--r-- | drivers/usb/host/xhci-ring.c | 40 | ||||
| -rw-r--r-- | drivers/usb/host/xhci.c | 129 | ||||
| -rw-r--r-- | drivers/usb/host/xhci.h | 9 |
14 files changed, 285 insertions, 200 deletions
diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c index bb55eb4a7d48..d7fe287d0678 100644 --- a/drivers/usb/host/ehci-omap.c +++ b/drivers/usb/host/ehci-omap.c @@ -56,15 +56,6 @@ #define EHCI_INSNREG05_ULPI_EXTREGADD_SHIFT 8 #define EHCI_INSNREG05_ULPI_WRDATA_SHIFT 0 -/* Errata i693 */ -static struct clk *utmi_p1_fck; -static struct clk *utmi_p2_fck; -static struct clk *xclk60mhsp1_ck; -static struct clk *xclk60mhsp2_ck; -static struct clk *usbhost_p1_fck; -static struct clk *usbhost_p2_fck; -static struct clk *init_60m_fclk; - /*-------------------------------------------------------------------------*/ static const struct hc_driver ehci_omap_hc_driver; @@ -80,40 +71,6 @@ static inline u32 ehci_read(void __iomem *base, u32 reg) return __raw_readl(base + reg); } -/* Erratum i693 workaround sequence */ -static void omap_ehci_erratum_i693(struct ehci_hcd *ehci) -{ - int ret = 0; - - /* Switch to the internal 60 MHz clock */ - ret = clk_set_parent(utmi_p1_fck, init_60m_fclk); - if (ret != 0) - ehci_err(ehci, "init_60m_fclk set parent" - "failed error:%d\n", ret); - - ret = clk_set_parent(utmi_p2_fck, init_60m_fclk); - if (ret != 0) - ehci_err(ehci, "init_60m_fclk set parent" - "failed error:%d\n", ret); - - clk_enable(usbhost_p1_fck); - clk_enable(usbhost_p2_fck); - - /* Wait 1ms and switch back to the external clock */ - mdelay(1); - ret = clk_set_parent(utmi_p1_fck, xclk60mhsp1_ck); - if (ret != 0) - ehci_err(ehci, "xclk60mhsp1_ck set parent" - "failed error:%d\n", ret); - - ret = clk_set_parent(utmi_p2_fck, xclk60mhsp2_ck); - if (ret != 0) - ehci_err(ehci, "xclk60mhsp2_ck set parent" - "failed error:%d\n", ret); - - clk_disable(usbhost_p1_fck); - clk_disable(usbhost_p2_fck); -} static void omap_ehci_soft_phy_reset(struct usb_hcd *hcd, u8 port) { @@ -195,50 +152,6 @@ static int omap_ehci_init(struct usb_hcd *hcd) return rc; } -static int omap_ehci_hub_control( - struct usb_hcd *hcd, - u16 typeReq, - u16 wValue, - u16 wIndex, - char *buf, - u16 wLength -) -{ - struct ehci_hcd *ehci = hcd_to_ehci(hcd); - u32 __iomem *status_reg = &ehci->regs->port_status[ - (wIndex & 0xff) - 1]; - u32 temp; - unsigned long flags; - int retval = 0; - - spin_lock_irqsave(&ehci->lock, flags); - - if (typeReq == SetPortFeature && wValue == USB_PORT_FEAT_SUSPEND) { - temp = ehci_readl(ehci, status_reg); - if ((temp & PORT_PE) == 0 || (temp & PORT_RESET) != 0) { - retval = -EPIPE; - goto done; - } - - temp &= ~PORT_WKCONN_E; - temp |= PORT_WKDISC_E | PORT_WKOC_E; - ehci_writel(ehci, temp | PORT_SUSPEND, status_reg); - - omap_ehci_erratum_i693(ehci); - - set_bit((wIndex & 0xff) - 1, &ehci->suspended_ports); - goto done; - } - - spin_unlock_irqrestore(&ehci->lock, flags); - - /* Handle the hub control events here */ - return ehci_hub_control(hcd, typeReq, wValue, wIndex, buf, wLength); -done: - spin_unlock_irqrestore(&ehci->lock, flags); - return retval; -} - static void disable_put_regulator( struct ehci_hcd_omap_platform_data *pdata) { @@ -351,79 +264,9 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev) goto err_pm_runtime; } - /* get clocks */ - utmi_p1_fck = clk_get(dev, "utmi_p1_gfclk"); - if (IS_ERR(utmi_p1_fck)) { - ret = PTR_ERR(utmi_p1_fck); - dev_err(dev, "utmi_p1_gfclk failed error:%d\n", ret); - goto err_add_hcd; - } - - xclk60mhsp1_ck = clk_get(dev, "xclk60mhsp1_ck"); - if (IS_ERR(xclk60mhsp1_ck)) { - ret = PTR_ERR(xclk60mhsp1_ck); - dev_err(dev, "xclk60mhsp1_ck failed error:%d\n", ret); - goto err_utmi_p1_fck; - } - - utmi_p2_fck = clk_get(dev, "utmi_p2_gfclk"); - if (IS_ERR(utmi_p2_fck)) { - ret = PTR_ERR(utmi_p2_fck); - dev_err(dev, "utmi_p2_gfclk failed error:%d\n", ret); - goto err_xclk60mhsp1_ck; - } - - xclk60mhsp2_ck = clk_get(dev, "xclk60mhsp2_ck"); - if (IS_ERR(xclk60mhsp2_ck)) { - ret = PTR_ERR(xclk60mhsp2_ck); - dev_err(dev, "xclk60mhsp2_ck failed error:%d\n", ret); - goto err_utmi_p2_fck; - } - - usbhost_p1_fck = clk_get(dev, "usb_host_hs_utmi_p1_clk"); - if (IS_ERR(usbhost_p1_fck)) { - ret = PTR_ERR(usbhost_p1_fck); - dev_err(dev, "usbhost_p1_fck failed error:%d\n", ret); - goto err_xclk60mhsp2_ck; - } - - usbhost_p2_fck = clk_get(dev, "usb_host_hs_utmi_p2_clk"); - if (IS_ERR(usbhost_p2_fck)) { - ret = PTR_ERR(usbhost_p2_fck); - dev_err(dev, "usbhost_p2_fck failed error:%d\n", ret); - goto err_usbhost_p1_fck; - } - - init_60m_fclk = clk_get(dev, "init_60m_fclk"); - if (IS_ERR(init_60m_fclk)) { - ret = PTR_ERR(init_60m_fclk); - dev_err(dev, "init_60m_fclk failed error:%d\n", ret); - goto err_usbhost_p2_fck; - } return 0; -err_usbhost_p2_fck: - clk_put(usbhost_p2_fck); - -err_usbhost_p1_fck: - clk_put(usbhost_p1_fck); - -err_xclk60mhsp2_ck: - clk_put(xclk60mhsp2_ck); - -err_utmi_p2_fck: - clk_put(utmi_p2_fck); - -err_xclk60mhsp1_ck: - clk_put(xclk60mhsp1_ck); - -err_utmi_p1_fck: - clk_put(utmi_p1_fck); - -err_add_hcd: - usb_remove_hcd(hcd); - err_pm_runtime: disable_put_regulator(pdata); pm_runtime_put_sync(dev); @@ -454,14 +297,6 @@ static int ehci_hcd_omap_remove(struct platform_device *pdev) iounmap(hcd->regs); usb_put_hcd(hcd); - clk_put(utmi_p1_fck); - clk_put(utmi_p2_fck); - clk_put(xclk60mhsp1_ck); - clk_put(xclk60mhsp2_ck); - clk_put(usbhost_p1_fck); - clk_put(usbhost_p2_fck); - clk_put(init_60m_fclk); - pm_runtime_put_sync(dev); pm_runtime_disable(dev); @@ -532,7 +367,7 @@ static const struct hc_driver ehci_omap_hc_driver = { * root hub support */ .hub_status_data = ehci_hub_status_data, - .hub_control = omap_ehci_hub_control, + .hub_control = ehci_hub_control, .bus_suspend = ehci_bus_suspend, .bus_resume = ehci_bus_resume, diff --git a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c index 9bc39ca460c8..4b66374bdc8e 100644 --- a/drivers/usb/host/ehci-q.c +++ b/drivers/usb/host/ehci-q.c @@ -128,9 +128,17 @@ qh_refresh (struct ehci_hcd *ehci, struct ehci_qh *qh) else { qtd = list_entry (qh->qtd_list.next, struct ehci_qtd, qtd_list); - /* first qtd may already be partially processed */ - if (cpu_to_hc32(ehci, qtd->qtd_dma) == qh->hw->hw_current) + /* + * first qtd may already be partially processed. + * If we come here during unlink, the QH overlay region + * might have reference to the just unlinked qtd. The + * qtd is updated in qh_completions(). Update the QH + * overlay here. + */ + if (cpu_to_hc32(ehci, qtd->qtd_dma) == qh->hw->hw_current) { + qh->hw->hw_qtd_next = qtd->hw_next; qtd = NULL; + } } if (qtd) diff --git a/drivers/usb/host/ehci-sead3.c b/drivers/usb/host/ehci-sead3.c index 58c96bd50d22..0c9e43cfaff5 100644 --- a/drivers/usb/host/ehci-sead3.c +++ b/drivers/usb/host/ehci-sead3.c @@ -40,7 +40,7 @@ static int ehci_sead3_setup(struct usb_hcd *hcd) ehci->need_io_watchdog = 0; /* Set burst length to 16 words. */ - ehci_writel(ehci, 0x1010, &ehci->regs->reserved[1]); + ehci_writel(ehci, 0x1010, &ehci->regs->reserved1[1]); return ret; } diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c index 950e95efa381..26dedb30ad0b 100644 --- a/drivers/usb/host/ehci-tegra.c +++ b/drivers/usb/host/ehci-tegra.c @@ -799,11 +799,12 @@ static int tegra_ehci_remove(struct platform_device *pdev) #endif usb_remove_hcd(hcd); - usb_put_hcd(hcd); tegra_usb_phy_close(tegra->phy); iounmap(hcd->regs); + usb_put_hcd(hcd); + clk_disable_unprepare(tegra->clk); clk_put(tegra->clk); diff --git a/drivers/usb/host/isp1362-hcd.c b/drivers/usb/host/isp1362-hcd.c index 2ed112d3e159..256326322cfd 100644 --- a/drivers/usb/host/isp1362-hcd.c +++ b/drivers/usb/host/isp1362-hcd.c @@ -543,12 +543,12 @@ static void postproc_ep(struct isp1362_hcd *isp1362_hcd, struct isp1362_ep *ep) usb_pipein(urb->pipe) ? "IN" : "OUT", ep->nextpid, short_ok ? "" : "not_", PTD_GET_COUNT(ptd), ep->maxpacket, len); + /* save the data underrun error code for later and + * proceed with the status stage + */ + urb->actual_length += PTD_GET_COUNT(ptd); if (usb_pipecontrol(urb->pipe)) { ep->nextpid = USB_PID_ACK; - /* save the data underrun error code for later and - * proceed with the status stage - */ - urb->actual_length += PTD_GET_COUNT(ptd); BUG_ON(urb->actual_length > urb->transfer_buffer_length); if (urb->status == -EINPROGRESS) diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c index a665b3eaa746..aaa8d2bce217 100644 --- a/drivers/usb/host/ohci-at91.c +++ b/drivers/usb/host/ohci-at91.c @@ -570,6 +570,16 @@ static int __devinit ohci_hcd_at91_drv_probe(struct platform_device *pdev) if (pdata) { at91_for_each_port(i) { + /* + * do not configure PIO if not in relation with + * real USB port on board + */ + if (i >= pdata->ports) { + pdata->vbus_pin[i] = -EINVAL; + pdata->overcurrent_pin[i] = -EINVAL; + break; + } + if (!gpio_is_valid(pdata->vbus_pin[i])) continue; gpio = pdata->vbus_pin[i]; diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c index df0828cb2aa3..966d1484ee79 100644 --- a/drivers/usb/host/pci-quirks.c +++ b/drivers/usb/host/pci-quirks.c @@ -75,7 +75,9 @@ #define NB_PIF0_PWRDOWN_1 0x01100013 #define USB_INTEL_XUSB2PR 0xD0 +#define USB_INTEL_USB2PRM 0xD4 #define USB_INTEL_USB3_PSSEN 0xD8 +#define USB_INTEL_USB3PRM 0xDC static struct amd_chipset_info { struct pci_dev *nb_dev; @@ -772,10 +774,18 @@ void usb_enable_xhci_ports(struct pci_dev *xhci_pdev) return; } - ports_available = 0xffffffff; + /* Read USB3PRM, the USB 3.0 Port Routing Mask Register + * Indicate the ports that can be changed from OS. + */ + pci_read_config_dword(xhci_pdev, USB_INTEL_USB3PRM, + &ports_available); + + dev_dbg(&xhci_pdev->dev, "Configurable ports to enable SuperSpeed: 0x%x\n", + ports_available); + /* Write USB3_PSSEN, the USB 3.0 Port SuperSpeed Enable - * Register, to turn on SuperSpeed terminations for all - * available ports. + * Register, to turn on SuperSpeed terminations for the + * switchable ports. */ pci_write_config_dword(xhci_pdev, USB_INTEL_USB3_PSSEN, cpu_to_le32(ports_available)); @@ -785,7 +795,16 @@ void usb_enable_xhci_ports(struct pci_dev *xhci_pdev) dev_dbg(&xhci_pdev->dev, "USB 3.0 ports that are now enabled " "under xHCI: 0x%x\n", ports_available); - ports_available = 0xffffffff; + /* Read XUSB2PRM, xHCI USB 2.0 Port Routing Mask Register + * Indicate the USB 2.0 ports to be controlled by the xHCI host. + */ + + pci_read_config_dword(xhci_pdev, USB_INTEL_USB2PRM, + &ports_available); + + dev_dbg(&xhci_pdev->dev, "Configurable USB 2.0 ports to hand over to xCHI: 0x%x\n", + ports_available); + /* Write XUSB2PR, the xHC USB 2.0 Port Routing Register, to * switch the USB 2.0 power and data lines over to the xHCI * host. @@ -800,6 +819,13 @@ void usb_enable_xhci_ports(struct pci_dev *xhci_pdev) } EXPORT_SYMBOL_GPL(usb_enable_xhci_ports); +void usb_disable_xhci_ports(struct pci_dev *xhci_pdev) +{ + pci_write_config_dword(xhci_pdev, USB_INTEL_USB3_PSSEN, 0x0); + pci_write_config_dword(xhci_pdev, USB_INTEL_XUSB2PR, 0x0); +} +EXPORT_SYMBOL_GPL(usb_disable_xhci_ports); + /** * PCI Quirks for xHCI. * @@ -815,12 +841,12 @@ static void __devinit quirk_usb_handoff_xhci(struct pci_dev *pdev) void __iomem *op_reg_base; u32 val; int timeout; + int len = pci_resource_len(pdev, 0); if (!mmio_resource_enabled(pdev, 0)) return; - base = ioremap_nocache(pci_resource_start(pdev, 0), - pci_resource_len(pdev, 0)); + base = ioremap_nocache(pci_resource_start(pdev, 0), len); if (base == NULL) return; @@ -830,9 +856,17 @@ static void __devinit quirk_usb_handoff_xhci(struct pci_dev *pdev) */ ext_cap_offset = xhci_find_next_cap_offset(base, XHCI_HCC_PARAMS_OFFSET); do { + if ((ext_cap_offset + sizeof(val)) > len) { + /* We're reading garbage from the controller */ + dev_warn(&pdev->dev, + "xHCI controller failing to respond"); + return; + } + if (!ext_cap_offset) /* We've reached the end of the extended capabilities */ goto hc_init; + val = readl(base + ext_cap_offset); if (XHCI_EXT_CAPS_ID(val) == XHCI_EXT_CAPS_LEGACY) break; @@ -863,9 +897,10 @@ static void __devinit quirk_usb_handoff_xhci(struct pci_dev *pdev) /* Disable any BIOS SMIs and clear all SMI events*/ writel(val, base + ext_cap_offset + XHCI_LEGACY_CONTROL_OFFSET); +hc_init: if (usb_is_intel_switchable_xhci(pdev)) usb_enable_xhci_ports(pdev); -hc_init: + op_reg_base = base + XHCI_HC_LENGTH(readl(base)); /* Wait for the host controller to be ready before writing any diff --git a/drivers/usb/host/pci-quirks.h b/drivers/usb/host/pci-quirks.h index b1002a8ef96f..7f69a39163ce 100644 --- a/drivers/usb/host/pci-quirks.h +++ b/drivers/usb/host/pci-quirks.h @@ -10,10 +10,12 @@ void usb_amd_quirk_pll_disable(void); void usb_amd_quirk_pll_enable(void); bool usb_is_intel_switchable_xhci(struct pci_dev *pdev); void usb_enable_xhci_ports(struct pci_dev *xhci_pdev); +void usb_disable_xhci_ports(struct pci_dev *xhci_pdev); #else static inline void usb_amd_quirk_pll_disable(void) {} static inline void usb_amd_quirk_pll_enable(void) {} static inline void usb_amd_dev_put(void) {} +static inline void usb_disable_xhci_ports(struct pci_dev *xhci_pdev) {} #endif /* CONFIG_PCI */ #endif /* __LINUX_USB_PCI_QUIRKS_H */ diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c index 74bfc868b7ad..d5eb357aa5c4 100644 --- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c @@ -493,11 +493,48 @@ static void xhci_hub_report_link_state(u32 *status, u32 status_reg) * when this bit is set. */ pls |= USB_PORT_STAT_CONNECTION; + } else { + /* + * If CAS bit isn't set but the Port is already at + * Compliance Mode, fake a connection so the USB core + * notices the Compliance state and resets the port. + * This resolves an issue generated by the SN65LVPE502CP + * in which sometimes the port enters compliance mode + * caused by a delay on the host-device negotiation. + */ + if (pls == USB_SS_PORT_LS_COMP_MOD) + pls |= USB_PORT_STAT_CONNECTION; } + /* update status field */ *status |= pls; } +/* + * Function for Compliance Mode Quirk. + * + * This Function verifies if all xhc USB3 ports have entered U0, if so, + * the compliance mode timer is deleted. A port won't enter + * compliance mode if it has previously entered U0. + */ +void xhci_del_comp_mod_timer(struct xhci_hcd *xhci, u32 status, u16 wIndex) +{ + u32 all_ports_seen_u0 = ((1 << xhci->num_usb3_ports)-1); + bool port_in_u0 = ((status & PORT_PLS_MASK) == XDEV_U0); + + if (!(xhci->quirks & XHCI_COMP_MODE_QUIRK)) + return; + + if ((xhci->port_status_u0 != all_ports_seen_u0) && port_in_u0) { + xhci->port_status_u0 |= 1 << wIndex; + if (xhci->port_status_u0 == all_ports_seen_u0) { + del_timer_sync(&xhci->comp_mode_recovery_timer); + xhci_dbg(xhci, "All USB3 ports have entered U0 already!\n"); + xhci_dbg(xhci, "Compliance Mode Recovery Timer Deleted.\n"); + } + } +} + int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, u16 wIndex, char *buf, u16 wLength) { @@ -651,6 +688,11 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, /* Update Port Link State for super speed ports*/ if (hcd->speed == HCD_USB3) { xhci_hub_report_link_state(&status, temp); + /* + * Verify if all USB3 Ports Have entered U0 already. + * Delete Compliance Mode Timer if so. + */ + xhci_del_comp_mod_timer(xhci, temp, wIndex); } if (bus_state->port_c_suspend & (1 << wIndex)) status |= 1 << USB_PORT_FEAT_C_SUSPEND; diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index 18b231b0c5d3..9bfd4ca1153c 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -94,11 +94,21 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) xhci->quirks |= XHCI_EP_LIMIT_QUIRK; xhci->limit_active_eps = 64; xhci->quirks |= XHCI_SW_BW_CHECKING; + /* + * PPT desktop boards DH77EB and DH77DF will power back on after + * a few seconds of being shutdown. The fix for this is to + * switch the ports from xHCI to EHCI on shutdown. We can't use + * DMI information to find those particular boards (since each + * vendor will change the board name), so we have to key off all + * PPT chipsets. + */ + xhci->quirks |= XHCI_SPURIOUS_REBOOT; } if (pdev->vendor == PCI_VENDOR_ID_ETRON && pdev->device == PCI_DEVICE_ID_ASROCK_P67) { xhci->quirks |= XHCI_RESET_ON_RESUME; xhci_dbg(xhci, "QUIRK: Resetting on resume\n"); + xhci->quirks |= XHCI_TRUST_TX_LENGTH; } if (pdev->vendor == PCI_VENDOR_ID_VIA) xhci->quirks |= XHCI_RESET_ON_RESUME; diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c index 689bc18b051d..df90fe51b4aa 100644 --- a/drivers/usb/host/xhci-plat.c +++ b/drivers/usb/host/xhci-plat.c @@ -118,7 +118,7 @@ static int xhci_plat_probe(struct platform_device *pdev) goto put_hcd; } - hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len); + hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len); if (!hcd->regs) { dev_dbg(&pdev->dev, "error mapping memory\n"); ret = -EFAULT; diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 8275645889da..643c2f3f3e73 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -145,29 +145,37 @@ static void next_trb(struct xhci_hcd *xhci, */ static void inc_deq(struct xhci_hcd *xhci, struct xhci_ring *ring) { - union xhci_trb *next; unsigned long long addr; ring->deq_updates++; - /* If this is not event ring, there is one more usable TRB */ + /* + * If this is not event ring, and the dequeue pointer + * is not on a link TRB, there is one more usable TRB + */ if (ring->type != TYPE_EVENT && !last_trb(xhci, ring, ring->deq_seg, ring->dequeue)) ring->num_trbs_free++; - next = ++(ring->dequeue); - /* Update the dequeue pointer further if that was a link TRB or we're at - * the end of an event ring segment (which doesn't have link TRBS) - */ - while (last_trb(xhci, ring, ring->deq_seg, next)) { - if (ring->type == TYPE_EVENT && last_trb_on_last_seg(xhci, - ring, ring->deq_seg, next)) { - ring->cycle_state = (ring->cycle_state ? 0 : 1); + do { + /* + * Update the dequeue pointer further if that was a link TRB or + * we're at the end of an event ring segment (which doesn't have + * link TRBS) + */ + if (last_trb(xhci, ring, ring->deq_seg, ring->dequeue)) { + if (ring->type == TYPE_EVENT && + last_trb_on_last_seg(xhci, ring, + ring->deq_seg, ring->dequeue)) { + ring->cycle_state = (ring->cycle_state ? 0 : 1); + } + ring->deq_seg = ring->deq_seg->next; + ring->dequeue = ring->deq_seg->trbs; + } else { + ring->dequeue++; } - ring->deq_seg = ring->deq_seg->next; - ring->dequeue = ring->deq_seg->trbs; - next = ring->dequeue; - } + } while (last_trb(xhci, ring, ring->deq_seg, ring->dequeue)); + addr = (unsigned long long) xhci_trb_virt_to_dma(ring->deq_seg, ring->dequeue); } @@ -2073,8 +2081,8 @@ static int handle_tx_event(struct xhci_hcd *xhci, if (xhci->quirks & XHCI_TRUST_TX_LENGTH) trb_comp_code = COMP_SHORT_TX; else - xhci_warn(xhci, "WARN Successful completion on short TX: " - "needs XHCI_TRUST_TX_LENGTH quirk?\n"); + xhci_warn_ratelimited(xhci, + "WARN Successful completion on short TX: needs XHCI_TRUST_TX_LENGTH quirk?\n"); case COMP_SHORT_TX: break; case COMP_STOP: diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 7648b2d4b268..6ece0ed288d4 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -26,6 +26,7 @@ #include <linux/module.h> #include <linux/moduleparam.h> #include <linux/slab.h> +#include <linux/dmi.h> #include "xhci.h" @@ -166,7 +167,7 @@ int xhci_reset(struct xhci_hcd *xhci) xhci_writel(xhci, command, &xhci->op_regs->command); ret = handshake(xhci, &xhci->op_regs->command, - CMD_RESET, 0, 250 * 1000); + CMD_RESET, 0, 10 * 1000 * 1000); if (ret) return ret; @@ -175,7 +176,8 @@ int xhci_reset(struct xhci_hcd *xhci) * xHCI cannot write to any doorbells or operational registers other * than status until the "Controller Not Ready" flag is cleared. */ - ret = handshake(xhci, &xhci->op_regs->status, STS_CNR, 0, 250 * 1000); + ret = handshake(xhci, &xhci->op_regs->status, + STS_CNR, 0, 10 * 1000 * 1000); for (i = 0; i < 2; ++i) { xhci->bus_state[i].port_c_suspend = 0; @@ -397,6 +399,95 @@ static void xhci_msix_sync_irqs(struct xhci_hcd *xhci) #endif +static void compliance_mode_recovery(unsigned long arg) +{ + struct xhci_hcd *xhci; + struct usb_hcd *hcd; + u32 temp; + int i; + + xhci = (struct xhci_hcd *)arg; + + for (i = 0; i < xhci->num_usb3_ports; i++) { + temp = xhci_readl(xhci, xhci->usb3_ports[i]); + if ((temp & PORT_PLS_MASK) == USB_SS_PORT_LS_COMP_MOD) { + /* + * Compliance Mode Detected. Letting USB Core + * handle the Warm Reset + */ + xhci_dbg(xhci, "Compliance Mode Detected->Port %d!\n", + i + 1); + xhci_dbg(xhci, "Attempting Recovery routine!\n"); + hcd = xhci->shared_hcd; + + if (hcd->state == HC_STATE_SUSPENDED) + usb_hcd_resume_root_hub(hcd); + + usb_hcd_poll_rh_status(hcd); + } + } + + if (xhci->port_status_u0 != ((1 << xhci->num_usb3_ports)-1)) + mod_timer(&xhci->comp_mode_recovery_timer, + jiffies + msecs_to_jiffies(COMP_MODE_RCVRY_MSECS)); +} + +/* + * Quirk to work around issue generated by the SN65LVPE502CP USB3.0 re-driver + * that causes ports behind that hardware to enter compliance mode sometimes. + * The quirk creates a timer that polls every 2 seconds the link state of + * each host controller's port and recovers it by issuing a Warm reset + * if Compliance mode is detected, otherwise the port will become "dead" (no + * device connections or disconnections will be detected anymore). Becasue no + * status event is generated when entering compliance mode (per xhci spec), + * this quirk is needed on systems that have the failing hardware installed. + */ +static void compliance_mode_recovery_timer_init(struct xhci_hcd *xhci) +{ + xhci->port_status_u0 = 0; + init_timer(&xhci->comp_mode_recovery_timer); + + xhci->comp_mode_recovery_timer.data = (unsigned long) xhci; + xhci->comp_mode_recovery_timer.function = compliance_mode_recovery; + xhci->comp_mode_recovery_timer.expires = jiffies + + msecs_to_jiffies(COMP_MODE_RCVRY_MSECS); + + set_timer_slack(&xhci->comp_mode_recovery_timer, + msecs_to_jiffies(COMP_MODE_RCVRY_MSECS)); + add_timer(&xhci->comp_mode_recovery_timer); + xhci_dbg(xhci, "Compliance Mode Recovery Timer Initialized.\n"); +} + +/* + * This function identifies the systems that have installed the SN65LVPE502CP + * USB3.0 re-driver and that need the Compliance Mode Quirk. + * Systems: + * Vendor: Hewlett-Packard -> System Models: Z420, Z620 and Z820 + */ +static bool compliance_mode_recovery_timer_quirk_check(void) +{ + const char *dmi_product_name, *dmi_sys_vendor; + + dmi_product_name = dmi_get_system_info(DMI_PRODUCT_NAME); + dmi_sys_vendor = dmi_get_system_info(DMI_SYS_VENDOR); + + if (!(strstr(dmi_sys_vendor, "Hewlett-Packard"))) + return false; + + if (strstr(dmi_product_name, "Z420") || + strstr(dmi_product_name, "Z620") || + strstr(dmi_product_name, "Z820")) + return true; + + return false; +} + +static int xhci_all_ports_seen_u0(struct xhci_hcd *xhci) +{ + return (xhci->port_status_u0 == ((1 << xhci->num_usb3_ports)-1)); +} + + /* * Initialize memory for HCD and xHC (one-time init). * @@ -420,6 +511,12 @@ int xhci_init(struct usb_hcd *hcd) retval = xhci_mem_init(xhci, GFP_KERNEL); xhci_dbg(xhci, "Finished xhci_init\n"); + /* Initializing Compliance Mode Recovery Data If Needed */ + if (compliance_mode_recovery_timer_quirk_check()) { + xhci->quirks |= XHCI_COMP_MODE_QUIRK; + compliance_mode_recovery_timer_init(xhci); + } + return retval; } @@ -628,6 +725,11 @@ void xhci_stop(struct usb_hcd *hcd) del_timer_sync(&xhci->event_ring_timer); #endif + /* Deleting Compliance Mode Recovery Timer */ + if ((xhci->quirks & XHCI_COMP_MODE_QUIRK) && + (!(xhci_all_ports_seen_u0(xhci)))) + del_timer_sync(&xhci->comp_mode_recovery_timer); + if (xhci->quirks & XHCI_AMD_PLL_FIX) usb_amd_dev_put(); @@ -658,6 +760,9 @@ void xhci_shutdown(struct usb_hcd *hcd) { struct xhci_hcd *xhci = hcd_to_xhci(hcd); + if (xhci->quirks & XHCI_SPURIOUS_REBOOT) + usb_disable_xhci_ports(to_pci_dev(hcd->self.controller)); + spin_lock_irq(&xhci->lock); xhci_halt(xhci); spin_unlock_irq(&xhci->lock); @@ -802,6 +907,16 @@ int xhci_suspend(struct xhci_hcd *xhci) } spin_unlock_irq(&xhci->lock); + /* + * Deleting Compliance Mode Recovery Timer because the xHCI Host + * is about to be suspended. + */ + if ((xhci->quirks & XHCI_COMP_MODE_QUIRK) && + (!(xhci_all_ports_seen_u0(xhci)))) { + del_timer_sync(&xhci->comp_mode_recovery_timer); + xhci_dbg(xhci, "Compliance Mode Recovery Timer Deleted!\n"); + } + /* step 5: remove core well power */ /* synchronize irq when using MSI-X */ xhci_msix_sync_irqs(xhci); @@ -934,6 +1049,16 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated) usb_hcd_resume_root_hub(hcd); usb_hcd_resume_root_hub(xhci->shared_hcd); } + + /* + * If system is subject to the Quirk, Compliance Mode Timer needs to + * be re-initialized Always after a system resume. Ports are subject + * to suffer the Compliance Mode issue again. It doesn't matter if + * ports have entered previously to U0 before system's suspension. + */ + if (xhci->quirks & XHCI_COMP_MODE_QUIRK) + compliance_mode_recovery_timer_init(xhci); + return retval; } #endif /* CONFIG_PM */ diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 55c0785810c9..1a05908c6673 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1494,6 +1494,8 @@ struct xhci_hcd { #define XHCI_TRUST_TX_LENGTH (1 << 10) #define XHCI_LPM_SUPPORT (1 << 11) #define XHCI_INTEL_HOST (1 << 12) +#define XHCI_SPURIOUS_REBOOT (1 << 13) +#define XHCI_COMP_MODE_QUIRK (1 << 14) unsigned int num_active_eps; unsigned int limit_active_eps; /* There are two roothubs to keep track of bus suspend info for */ @@ -1510,6 +1512,11 @@ struct xhci_hcd { unsigned sw_lpm_support:1; /* support xHCI 1.0 spec USB2 hardware LPM */ unsigned hw_lpm_support:1; + /* Compliance Mode Recovery Data */ + struct timer_list comp_mode_recovery_timer; + u32 port_status_u0; +/* Compliance Mode Timer Triggered every 2 seconds */ +#define COMP_MODE_RCVRY_MSECS 2000 }; /* convert between an HCD pointer and the corresponding EHCI_HCD */ @@ -1537,6 +1544,8 @@ static inline struct usb_hcd *xhci_to_hcd(struct xhci_hcd *xhci) dev_err(xhci_to_hcd(xhci)->self.controller , fmt , ## args) #define xhci_warn(xhci, fmt, args...) \ dev_warn(xhci_to_hcd(xhci)->self.controller , fmt , ## args) +#define xhci_warn_ratelimited(xhci, fmt, args...) \ + dev_warn_ratelimited(xhci_to_hcd(xhci)->self.controller , fmt , ## args) /* TODO: copied from ehci.h - can be refactored? */ /* xHCI spec says all registers are little endian */ |