diff options
Diffstat (limited to 'drivers/usb/host/xhci.c')
-rw-r--r-- | drivers/usb/host/xhci.c | 175 |
1 files changed, 94 insertions, 81 deletions
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 25b87e99b4dd..f0ab63138016 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -486,6 +486,10 @@ static void compliance_mode_recovery(struct timer_list *t) xhci = from_timer(xhci, t, comp_mode_recovery_timer); rhub = &xhci->usb3_rhub; + hcd = rhub->hcd; + + if (!hcd) + return; for (i = 0; i < rhub->num_ports; i++) { temp = readl(rhub->ports[i]->addr); @@ -499,7 +503,6 @@ static void compliance_mode_recovery(struct timer_list *t) i + 1); xhci_dbg_trace(xhci, trace_xhci_dbg_quirks, "Attempting compliance mode recovery"); - hcd = xhci->shared_hcd; if (hcd->state == HC_STATE_SUSPENDED) usb_hcd_resume_root_hub(hcd); @@ -612,14 +615,11 @@ static int xhci_run_finished(struct xhci_hcd *xhci) xhci_halt(xhci); return -ENODEV; } - xhci->shared_hcd->state = HC_STATE_RUNNING; xhci->cmd_ring_state = CMD_RING_STATE_RUNNING; if (xhci->quirks & XHCI_NEC_HOST) xhci_ring_cmd_db(xhci); - xhci_dbg_trace(xhci, trace_xhci_dbg_init, - "Finished xhci_run for USB3 roothub"); return 0; } @@ -694,12 +694,17 @@ int xhci_run(struct usb_hcd *hcd) xhci_free_command(xhci, command); } xhci_dbg_trace(xhci, trace_xhci_dbg_init, - "Finished xhci_run for USB2 roothub"); + "Finished %s for main hcd", __func__); xhci_create_dbc_dev(xhci); xhci_debugfs_init(xhci); + if (xhci_has_one_roothub(xhci)) + return xhci_run_finished(xhci); + + set_bit(HCD_FLAG_DEFER_RH_REGISTER, &hcd->flags); + return 0; } EXPORT_SYMBOL_GPL(xhci_run); @@ -992,7 +997,7 @@ int xhci_suspend(struct xhci_hcd *xhci, bool do_wakeup) return 0; if (hcd->state != HC_STATE_SUSPENDED || - xhci->shared_hcd->state != HC_STATE_SUSPENDED) + (xhci->shared_hcd && xhci->shared_hcd->state != HC_STATE_SUSPENDED)) return -EINVAL; /* Clear root port wake on bits if wakeup not allowed. */ @@ -1009,15 +1014,18 @@ int xhci_suspend(struct xhci_hcd *xhci, bool do_wakeup) __func__, hcd->self.busnum); clear_bit(HCD_FLAG_POLL_RH, &hcd->flags); del_timer_sync(&hcd->rh_timer); - clear_bit(HCD_FLAG_POLL_RH, &xhci->shared_hcd->flags); - del_timer_sync(&xhci->shared_hcd->rh_timer); + if (xhci->shared_hcd) { + clear_bit(HCD_FLAG_POLL_RH, &xhci->shared_hcd->flags); + del_timer_sync(&xhci->shared_hcd->rh_timer); + } if (xhci->quirks & XHCI_SUSPEND_DELAY) usleep_range(1000, 1500); spin_lock_irq(&xhci->lock); clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); - clear_bit(HCD_FLAG_HW_ACCESSIBLE, &xhci->shared_hcd->flags); + if (xhci->shared_hcd) + clear_bit(HCD_FLAG_HW_ACCESSIBLE, &xhci->shared_hcd->flags); /* step 1: stop endpoint */ /* skipped assuming that port suspend has done */ @@ -1117,7 +1125,8 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated) msleep(100); set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); - set_bit(HCD_FLAG_HW_ACCESSIBLE, &xhci->shared_hcd->flags); + if (xhci->shared_hcd) + set_bit(HCD_FLAG_HW_ACCESSIBLE, &xhci->shared_hcd->flags); spin_lock_irq(&xhci->lock); @@ -1177,7 +1186,8 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated) /* Let the USB core know _both_ roothubs lost power. */ usb_root_hub_lost_power(xhci->main_hcd->self.root_hub); - usb_root_hub_lost_power(xhci->shared_hcd->self.root_hub); + if (xhci->shared_hcd) + usb_root_hub_lost_power(xhci->shared_hcd->self.root_hub); xhci_dbg(xhci, "Stop HCD\n"); xhci_halt(xhci); @@ -1217,12 +1227,13 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated) xhci_dbg(xhci, "Start the primary HCD\n"); retval = xhci_run(hcd->primary_hcd); - if (!retval) { + if (!retval && secondary_hcd) { xhci_dbg(xhci, "Start the secondary HCD\n"); retval = xhci_run(secondary_hcd); } hcd->state = HC_STATE_SUSPENDED; - xhci->shared_hcd->state = HC_STATE_SUSPENDED; + if (xhci->shared_hcd) + xhci->shared_hcd->state = HC_STATE_SUSPENDED; goto done; } @@ -1260,7 +1271,8 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated) } if (pending_portevent) { - usb_hcd_resume_root_hub(xhci->shared_hcd); + if (xhci->shared_hcd) + usb_hcd_resume_root_hub(xhci->shared_hcd); usb_hcd_resume_root_hub(hcd); } } @@ -1279,8 +1291,10 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated) /* Re-enable port polling. */ xhci_dbg(xhci, "%s: starting usb%d port polling.\n", __func__, hcd->self.busnum); - set_bit(HCD_FLAG_POLL_RH, &xhci->shared_hcd->flags); - usb_hcd_poll_rh_status(xhci->shared_hcd); + if (xhci->shared_hcd) { + set_bit(HCD_FLAG_POLL_RH, &xhci->shared_hcd->flags); + usb_hcd_poll_rh_status(xhci->shared_hcd); + } set_bit(HCD_FLAG_POLL_RH, &hcd->flags); usb_hcd_poll_rh_status(hcd); @@ -1860,9 +1874,6 @@ static int xhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) goto done; } ep->ep_state |= EP_STOP_CMD_PENDING; - ep->stop_cmd_timer.expires = jiffies + - XHCI_STOP_EP_CMD_TIMEOUT * HZ; - add_timer(&ep->stop_cmd_timer); xhci_queue_stop_endpoint(xhci, command, urb->dev->slot_id, ep_index, 0); xhci_ring_cmd_db(xhci); @@ -3972,10 +3983,8 @@ static void xhci_free_dev(struct usb_hcd *hcd, struct usb_device *udev) trace_xhci_free_dev(slot_ctx); /* Stop any wayward timer functions (which may grab the lock) */ - for (i = 0; i < 31; i++) { + for (i = 0; i < 31; i++) virt_dev->eps[i].ep_state &= ~EP_STOP_CMD_PENDING; - del_timer_sync(&virt_dev->eps[i].stop_cmd_timer); - } virt_dev->udev = NULL; xhci_disable_slot(xhci, udev->slot_id); xhci_free_virt_device(xhci, udev->slot_id); @@ -4879,9 +4888,6 @@ static int xhci_check_intel_tier_policy(struct usb_device *udev, struct usb_device *parent; unsigned int num_hubs; - if (state == USB3_LPM_U2) - return 0; - /* Don't enable U1 if the device is on a 2nd tier hub or lower. */ for (parent = udev->parent, num_hubs = 0; parent->parent; parent = parent->parent) @@ -4890,7 +4896,7 @@ static int xhci_check_intel_tier_policy(struct usb_device *udev, if (num_hubs < 2) return 0; - dev_dbg(&udev->dev, "Disabling U1 link state for device" + dev_dbg(&udev->dev, "Disabling U1/U2 link state for device" " below second-tier hub.\n"); dev_dbg(&udev->dev, "Plug device into first-tier hub " "to decrease power consumption.\n"); @@ -4931,9 +4937,6 @@ static u16 xhci_calculate_lpm_timeout(struct usb_hcd *hcd, return timeout; } - if (xhci_check_tier_policy(xhci, udev, state) < 0) - return timeout; - /* Gather some information about the currently installed configuration * and alternate interface settings. */ @@ -5040,6 +5043,9 @@ static int xhci_enable_usb3_lpm_timeout(struct usb_hcd *hcd, !xhci->devs[udev->slot_id]) return USB3_LPM_DISABLED; + if (xhci_check_tier_policy(xhci, udev, state) < 0) + return USB3_LPM_DISABLED; + hub_encoded_timeout = xhci_calculate_lpm_timeout(hcd, udev, state); mel = calculate_max_exit_latency(udev, state, hub_encoded_timeout); if (mel < 0) { @@ -5207,6 +5213,57 @@ static int xhci_get_frame(struct usb_hcd *hcd) return readl(&xhci->run_regs->microframe_index) >> 3; } +static void xhci_hcd_init_usb2_data(struct xhci_hcd *xhci, struct usb_hcd *hcd) +{ + xhci->usb2_rhub.hcd = hcd; + hcd->speed = HCD_USB2; + hcd->self.root_hub->speed = USB_SPEED_HIGH; + /* + * USB 2.0 roothub under xHCI has an integrated TT, + * (rate matching hub) as opposed to having an OHCI/UHCI + * companion controller. + */ + hcd->has_tt = 1; +} + +static void xhci_hcd_init_usb3_data(struct xhci_hcd *xhci, struct usb_hcd *hcd) +{ + unsigned int minor_rev; + + /* + * Early xHCI 1.1 spec did not mention USB 3.1 capable hosts + * should return 0x31 for sbrn, or that the minor revision + * is a two digit BCD containig minor and sub-minor numbers. + * This was later clarified in xHCI 1.2. + * + * Some USB 3.1 capable hosts therefore have sbrn 0x30, and + * minor revision set to 0x1 instead of 0x10. + */ + if (xhci->usb3_rhub.min_rev == 0x1) + minor_rev = 1; + else + minor_rev = xhci->usb3_rhub.min_rev / 0x10; + + switch (minor_rev) { + case 2: + hcd->speed = HCD_USB32; + hcd->self.root_hub->speed = USB_SPEED_SUPER_PLUS; + hcd->self.root_hub->rx_lanes = 2; + hcd->self.root_hub->tx_lanes = 2; + hcd->self.root_hub->ssp_rate = USB_SSP_GEN_2x2; + break; + case 1: + hcd->speed = HCD_USB31; + hcd->self.root_hub->speed = USB_SPEED_SUPER_PLUS; + hcd->self.root_hub->ssp_rate = USB_SSP_GEN_2x1; + break; + } + xhci_info(xhci, "Host supports USB 3.%x %sSuperSpeed\n", + minor_rev, minor_rev ? "Enhanced " : ""); + + xhci->usb3_rhub.hcd = hcd; +} + int xhci_gen_setup(struct usb_hcd *hcd, xhci_get_quirks_t get_quirks) { struct xhci_hcd *xhci; @@ -5215,7 +5272,6 @@ int xhci_gen_setup(struct usb_hcd *hcd, xhci_get_quirks_t get_quirks) * quirks */ struct device *dev = hcd->self.sysdev; - unsigned int minor_rev; int retval; /* Accept arbitrarily long scatter-gather lists */ @@ -5229,61 +5285,13 @@ int xhci_gen_setup(struct usb_hcd *hcd, xhci_get_quirks_t get_quirks) xhci = hcd_to_xhci(hcd); - if (usb_hcd_is_primary_hcd(hcd)) { - xhci->main_hcd = hcd; - xhci->usb2_rhub.hcd = hcd; - /* Mark the first roothub as being USB 2.0. - * The xHCI driver will register the USB 3.0 roothub. - */ - hcd->speed = HCD_USB2; - hcd->self.root_hub->speed = USB_SPEED_HIGH; - /* - * USB 2.0 roothub under xHCI has an integrated TT, - * (rate matching hub) as opposed to having an OHCI/UHCI - * companion controller. - */ - hcd->has_tt = 1; - } else { - /* - * Early xHCI 1.1 spec did not mention USB 3.1 capable hosts - * should return 0x31 for sbrn, or that the minor revision - * is a two digit BCD containig minor and sub-minor numbers. - * This was later clarified in xHCI 1.2. - * - * Some USB 3.1 capable hosts therefore have sbrn 0x30, and - * minor revision set to 0x1 instead of 0x10. - */ - if (xhci->usb3_rhub.min_rev == 0x1) - minor_rev = 1; - else - minor_rev = xhci->usb3_rhub.min_rev / 0x10; - - switch (minor_rev) { - case 2: - hcd->speed = HCD_USB32; - hcd->self.root_hub->speed = USB_SPEED_SUPER_PLUS; - hcd->self.root_hub->rx_lanes = 2; - hcd->self.root_hub->tx_lanes = 2; - hcd->self.root_hub->ssp_rate = USB_SSP_GEN_2x2; - break; - case 1: - hcd->speed = HCD_USB31; - hcd->self.root_hub->speed = USB_SPEED_SUPER_PLUS; - hcd->self.root_hub->ssp_rate = USB_SSP_GEN_2x1; - break; - } - xhci_info(xhci, "Host supports USB 3.%x %sSuperSpeed\n", - minor_rev, - minor_rev ? "Enhanced " : ""); - - xhci->usb3_rhub.hcd = hcd; - /* xHCI private pointer was set in xhci_pci_probe for the second - * registered roothub. - */ + if (!usb_hcd_is_primary_hcd(hcd)) { + xhci_hcd_init_usb3_data(xhci, hcd); return 0; } mutex_init(&xhci->mutex); + xhci->main_hcd = hcd; xhci->cap_regs = hcd->regs; xhci->op_regs = hcd->regs + HC_LENGTH(readl(&xhci->cap_regs->hc_capbase)); @@ -5358,6 +5366,11 @@ int xhci_gen_setup(struct usb_hcd *hcd, xhci_get_quirks_t get_quirks) return retval; xhci_dbg(xhci, "Called HCD init\n"); + if (xhci_hcd_is_usb3(hcd)) + xhci_hcd_init_usb3_data(xhci, hcd); + else + xhci_hcd_init_usb2_data(xhci, hcd); + xhci_info(xhci, "hcc params 0x%08x hci version 0x%x quirks 0x%016llx\n", xhci->hcc_params, xhci->hci_version, xhci->quirks); |