1 files changed, 339 insertions, 183 deletions

diff --git a/drivers/usb/host/ohci-da8xx.c b/drivers/usb/host/ohci-da8xx.c
index e5c33bc98ea4..05da2cb59612 100644
--- a/drivers/usb/host/ohci-da8xx.c
+++ b/drivers/usb/host/ohci-da8xx.c
@@ -11,62 +11,192 @@
  * kind, whether express or implied.
  */
 
+#include <linux/clk.h>
+#include <linux/io.h>
 #include <linux/interrupt.h>
 #include <linux/jiffies.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
 #include <linux/platform_device.h>
-#include <linux/clk.h>
-
-#include <mach/da8xx.h>
+#include <linux/phy/phy.h>
 #include <linux/platform_data/usb-davinci.h>
+#include <linux/regulator/consumer.h>
+#include <linux/usb.h>
+#include <linux/usb/hcd.h>
+#include <asm/unaligned.h>
 
-#ifndef CONFIG_ARCH_DAVINCI_DA8XX
-#error "This file is DA8xx bus glue.  Define CONFIG_ARCH_DAVINCI_DA8XX."
-#endif
+#include "ohci.h"
 
-#define CFGCHIP2	DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG)
+#define DRIVER_DESC "DA8XX"
+#define DRV_NAME "ohci-da8xx"
 
-static struct clk *usb11_clk;
-static struct clk *usb20_clk;
+static struct hc_driver __read_mostly ohci_da8xx_hc_driver;
+
+static int (*orig_ohci_hub_control)(struct usb_hcd  *hcd, u16 typeReq,
+			u16 wValue, u16 wIndex, char *buf, u16 wLength);
+static int (*orig_ohci_hub_status_data)(struct usb_hcd *hcd, char *buf);
+
+struct da8xx_ohci_hcd {
+	struct usb_hcd *hcd;
+	struct clk *usb11_clk;
+	struct phy *usb11_phy;
+	struct regulator *vbus_reg;
+	struct notifier_block nb;
+	unsigned int reg_enabled;
+};
+
+#define to_da8xx_ohci(hcd) (struct da8xx_ohci_hcd *)(hcd_to_ohci(hcd)->priv)
 
 /* Over-current indicator change bitmask */
 static volatile u16 ocic_mask;
 
-static void ohci_da8xx_clock(int on)
+static int ohci_da8xx_enable(struct usb_hcd *hcd)
 {
-	u32 cfgchip2;
-
-	cfgchip2 = __raw_readl(CFGCHIP2);
-	if (on) {
-		clk_enable(usb11_clk);
-
-		/*
-		 * If USB 1.1 reference clock is sourced from USB 2.0 PHY, we
-		 * need to enable the USB 2.0 module clocking, start its PHY,
-		 * and not allow it to stop the clock during USB 2.0 suspend.
-		 */
-		if (!(cfgchip2 & CFGCHIP2_USB1PHYCLKMUX)) {
-			clk_enable(usb20_clk);
-
-			cfgchip2 &= ~(CFGCHIP2_RESET | CFGCHIP2_PHYPWRDN);
-			cfgchip2 |= CFGCHIP2_PHY_PLLON;
-			__raw_writel(cfgchip2, CFGCHIP2);
-
-			pr_info("Waiting for USB PHY clock good...\n");
-			while (!(__raw_readl(CFGCHIP2) & CFGCHIP2_PHYCLKGD))
-				cpu_relax();
-		}
+	struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd);
+	int ret;
+
+	ret = clk_prepare_enable(da8xx_ohci->usb11_clk);
+	if (ret)
+		return ret;
+
+	ret = phy_init(da8xx_ohci->usb11_phy);
+	if (ret)
+		goto err_phy_init;
+
+	ret = phy_power_on(da8xx_ohci->usb11_phy);
+	if (ret)
+		goto err_phy_power_on;
+
+	return 0;
+
+err_phy_power_on:
+	phy_exit(da8xx_ohci->usb11_phy);
+err_phy_init:
+	clk_disable_unprepare(da8xx_ohci->usb11_clk);
+
+	return ret;
+}
+
+static void ohci_da8xx_disable(struct usb_hcd *hcd)
+{
+	struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd);
+
+	phy_power_off(da8xx_ohci->usb11_phy);
+	phy_exit(da8xx_ohci->usb11_phy);
+	clk_disable_unprepare(da8xx_ohci->usb11_clk);
+}
 
-		/* Enable USB 1.1 PHY */
-		cfgchip2 |= CFGCHIP2_USB1SUSPENDM;
-	} else {
-		clk_disable(usb11_clk);
-		if (!(cfgchip2 & CFGCHIP2_USB1PHYCLKMUX))
-			clk_disable(usb20_clk);
+static int ohci_da8xx_set_power(struct usb_hcd *hcd, int on)
+{
+	struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd);
+	struct device *dev		= hcd->self.controller;
+	struct da8xx_ohci_root_hub *hub	= dev_get_platdata(dev);
+	int ret;
+
+	if (hub && hub->set_power)
+		return hub->set_power(1, on);
+
+	if (!da8xx_ohci->vbus_reg)
+		return 0;
 
-		/* Disable USB 1.1 PHY */
-		cfgchip2 &= ~CFGCHIP2_USB1SUSPENDM;
+	if (on && !da8xx_ohci->reg_enabled) {
+		ret = regulator_enable(da8xx_ohci->vbus_reg);
+		if (ret) {
+			dev_err(dev, "Failed to enable regulator: %d\n", ret);
+			return ret;
+		}
+		da8xx_ohci->reg_enabled = 1;
+
+	} else if (!on && da8xx_ohci->reg_enabled) {
+		ret = regulator_disable(da8xx_ohci->vbus_reg);
+		if (ret) {
+			dev_err(dev, "Failed  to disable regulator: %d\n", ret);
+			return ret;
+		}
+		da8xx_ohci->reg_enabled = 0;
 	}
-	__raw_writel(cfgchip2, CFGCHIP2);
+
+	return 0;
+}
+
+static int ohci_da8xx_get_power(struct usb_hcd *hcd)
+{
+	struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd);
+	struct device *dev		= hcd->self.controller;
+	struct da8xx_ohci_root_hub *hub	= dev_get_platdata(dev);
+
+	if (hub && hub->get_power)
+		return hub->get_power(1);
+
+	if (da8xx_ohci->vbus_reg)
+		return regulator_is_enabled(da8xx_ohci->vbus_reg);
+
+	return 1;
+}
+
+static int ohci_da8xx_get_oci(struct usb_hcd *hcd)
+{
+	struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd);
+	struct device *dev		= hcd->self.controller;
+	struct da8xx_ohci_root_hub *hub	= dev_get_platdata(dev);
+	unsigned int flags;
+	int ret;
+
+	if (hub && hub->get_oci)
+		return hub->get_oci(1);
+
+	if (!da8xx_ohci->vbus_reg)
+		return 0;
+
+	ret = regulator_get_error_flags(da8xx_ohci->vbus_reg, &flags);
+	if (ret)
+		return ret;
+
+	if (flags & REGULATOR_ERROR_OVER_CURRENT)
+		return 1;
+
+	return 0;
+}
+
+static int ohci_da8xx_has_set_power(struct usb_hcd *hcd)
+{
+	struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd);
+	struct device *dev		= hcd->self.controller;
+	struct da8xx_ohci_root_hub *hub	= dev_get_platdata(dev);
+
+	if (hub && hub->set_power)
+		return 1;
+
+	if (da8xx_ohci->vbus_reg)
+		return 1;
+
+	return 0;
+}
+
+static int ohci_da8xx_has_oci(struct usb_hcd *hcd)
+{
+	struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd);
+	struct device *dev		= hcd->self.controller;
+	struct da8xx_ohci_root_hub *hub	= dev_get_platdata(dev);
+
+	if (hub && hub->get_oci)
+		return 1;
+
+	if (da8xx_ohci->vbus_reg)
+		return 1;
+
+	return 0;
+}
+
+static int ohci_da8xx_has_potpgt(struct usb_hcd *hcd)
+{
+	struct device *dev		= hcd->self.controller;
+	struct da8xx_ohci_root_hub *hub	= dev_get_platdata(dev);
+
+	if (hub && hub->potpgt)
+		return 1;
+
+	return 0;
 }
 
 /*
@@ -82,7 +212,51 @@ static void ohci_da8xx_ocic_handler(struct da8xx_ohci_root_hub *hub,
 		hub->set_power(port, 0);
 }
 
-static int ohci_da8xx_init(struct usb_hcd *hcd)
+static int ohci_da8xx_regulator_event(struct notifier_block *nb,
+				unsigned long event, void *data)
+{
+	struct da8xx_ohci_hcd *da8xx_ohci =
+				container_of(nb, struct da8xx_ohci_hcd, nb);
+
+	if (event & REGULATOR_EVENT_OVER_CURRENT) {
+		ocic_mask |= 1 << 1;
+		ohci_da8xx_set_power(da8xx_ohci->hcd, 0);
+	}
+
+	return 0;
+}
+
+static int ohci_da8xx_register_notify(struct usb_hcd *hcd)
+{
+	struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd);
+	struct device *dev		= hcd->self.controller;
+	struct da8xx_ohci_root_hub *hub	= dev_get_platdata(dev);
+	int ret = 0;
+
+	if (hub && hub->ocic_notify) {
+		ret = hub->ocic_notify(ohci_da8xx_ocic_handler);
+	} else if (da8xx_ohci->vbus_reg) {
+		da8xx_ohci->nb.notifier_call = ohci_da8xx_regulator_event;
+		ret = devm_regulator_register_notifier(da8xx_ohci->vbus_reg,
+						&da8xx_ohci->nb);
+	}
+
+	if (ret)
+		dev_err(dev, "Failed to register notifier: %d\n", ret);
+
+	return ret;
+}
+
+static void ohci_da8xx_unregister_notify(struct usb_hcd *hcd)
+{
+	struct device *dev		= hcd->self.controller;
+	struct da8xx_ohci_root_hub *hub	= dev_get_platdata(dev);
+
+	if (hub && hub->ocic_notify)
+		hub->ocic_notify(NULL);
+}
+
+static int ohci_da8xx_reset(struct usb_hcd *hcd)
 {
 	struct device *dev		= hcd->self.controller;
 	struct da8xx_ohci_root_hub *hub	= dev_get_platdata(dev);
@@ -92,7 +266,9 @@ static int ohci_da8xx_init(struct usb_hcd *hcd)
 
 	dev_dbg(dev, "starting USB controller\n");
 
-	ohci_da8xx_clock(1);
+	result = ohci_da8xx_enable(hcd);
+	if (result < 0)
+		return result;
 
 	/*
 	 * DA8xx only have 1 port connected to the pins but the HC root hub
@@ -100,9 +276,11 @@ static int ohci_da8xx_init(struct usb_hcd *hcd)
 	 */
 	ohci->num_ports = 1;
 
-	result = ohci_init(ohci);
-	if (result < 0)
+	result = ohci_setup(hcd);
+	if (result < 0) {
+		ohci_da8xx_disable(hcd);
 		return result;
+	}
 
 	/*
 	 * Since we're providing a board-specific root hub port power control
@@ -111,45 +289,29 @@ static int ohci_da8xx_init(struct usb_hcd *hcd)
 	 * the correct hub descriptor...
 	 */
 	rh_a = ohci_readl(ohci, &ohci->regs->roothub.a);
-	if (hub->set_power) {
+	if (ohci_da8xx_has_set_power(hcd)) {
 		rh_a &= ~RH_A_NPS;
 		rh_a |=  RH_A_PSM;
 	}
-	if (hub->get_oci) {
+	if (ohci_da8xx_has_oci(hcd)) {
 		rh_a &= ~RH_A_NOCP;
 		rh_a |=  RH_A_OCPM;
 	}
-	rh_a &= ~RH_A_POTPGT;
-	rh_a |= hub->potpgt << 24;
+	if (ohci_da8xx_has_potpgt(hcd)) {
+		rh_a &= ~RH_A_POTPGT;
+		rh_a |= hub->potpgt << 24;
+	}
 	ohci_writel(ohci, rh_a, &ohci->regs->roothub.a);
 
 	return result;
 }
 
-static void ohci_da8xx_stop(struct usb_hcd *hcd)
-{
-	ohci_stop(hcd);
-	ohci_da8xx_clock(0);
-}
-
-static int ohci_da8xx_start(struct usb_hcd *hcd)
-{
-	struct ohci_hcd	*ohci		= hcd_to_ohci(hcd);
-	int result;
-
-	result = ohci_run(ohci);
-	if (result < 0)
-		ohci_da8xx_stop(hcd);
-
-	return result;
-}
-
 /*
  * Update the status data from the hub with the over-current indicator change.
  */
 static int ohci_da8xx_hub_status_data(struct usb_hcd *hcd, char *buf)
 {
-	int length		= ohci_hub_status_data(hcd, buf);
+	int length		= orig_ohci_hub_status_data(hcd, buf);
 
 	/* See if we have OCIC bit set on port 1 */
 	if (ocic_mask & (1 << 1)) {
@@ -171,7 +333,6 @@ static int ohci_da8xx_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 				  u16 wIndex, char *buf, u16 wLength)
 {
 	struct device *dev		= hcd->self.controller;
-	struct da8xx_ohci_root_hub *hub	= dev_get_platdata(dev);
 	int temp;
 
 	switch (typeReq) {
@@ -185,11 +346,11 @@ static int ohci_da8xx_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 		temp = roothub_portstatus(hcd_to_ohci(hcd), wIndex - 1);
 
 		/* The port power status (PPS) bit defaults to 1 */
-		if (hub->get_power && hub->get_power(wIndex) == 0)
+		if (!ohci_da8xx_get_power(hcd))
 			temp &= ~RH_PS_PPS;
 
 		/* The port over-current indicator (POCI) bit is always 0 */
-		if (hub->get_oci && hub->get_oci(wIndex) > 0)
+		if (ohci_da8xx_get_oci(hcd) > 0)
 			temp |=  RH_PS_POCI;
 
 		/* The over-current indicator change (OCIC) bit is 0 too */
@@ -214,10 +375,7 @@ check_port:
 			dev_dbg(dev, "%sPortFeature(%u): %s\n",
 				temp ? "Set" : "Clear", wIndex, "POWER");
 
-			if (!hub->set_power)
-				return -EPIPE;
-
-			return hub->set_power(wIndex, temp) ? -EPIPE : 0;
+			return ohci_da8xx_set_power(hcd, temp) ? -EPIPE : 0;
 		case USB_PORT_FEAT_C_OVER_CURRENT:
 			dev_dbg(dev, "%sPortFeature(%u): %s\n",
 				temp ? "Set" : "Clear", wIndex,
@@ -231,86 +389,61 @@ check_port:
 		}
 	}
 
-	return ohci_hub_control(hcd, typeReq, wValue, wIndex, buf, wLength);
+	return orig_ohci_hub_control(hcd, typeReq, wValue,
+			wIndex, buf, wLength);
 }
 
-static const struct hc_driver ohci_da8xx_hc_driver = {
-	.description		= hcd_name,
-	.product_desc		= "DA8xx OHCI",
-	.hcd_priv_size		= sizeof(struct ohci_hcd),
-
-	/*
-	 * generic hardware linkage
-	 */
-	.irq			= ohci_irq,
-	.flags			= HCD_USB11 | HCD_MEMORY,
-
-	/*
-	 * basic lifecycle operations
-	 */
-	.reset			= ohci_da8xx_init,
-	.start			= ohci_da8xx_start,
-	.stop			= ohci_da8xx_stop,
-	.shutdown		= ohci_shutdown,
-
-	/*
-	 * managing i/o requests and associated device resources
-	 */
-	.urb_enqueue		= ohci_urb_enqueue,
-	.urb_dequeue		= ohci_urb_dequeue,
-	.endpoint_disable	= ohci_endpoint_disable,
-
-	/*
-	 * scheduling support
-	 */
-	.get_frame_number	= ohci_get_frame,
-
-	/*
-	 * root hub support
-	 */
-	.hub_status_data	= ohci_da8xx_hub_status_data,
-	.hub_control		= ohci_da8xx_hub_control,
-
-#ifdef	CONFIG_PM
-	.bus_suspend		= ohci_bus_suspend,
-	.bus_resume		= ohci_bus_resume,
-#endif
-	.start_port_reset	= ohci_start_port_reset,
-};
-
 /*-------------------------------------------------------------------------*/
+#ifdef CONFIG_OF
+static const struct of_device_id da8xx_ohci_ids[] = {
+	{ .compatible = "ti,da830-ohci" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, da8xx_ohci_ids);
+#endif
 
-
-/**
- * usb_hcd_da8xx_probe - initialize DA8xx-based HCDs
- * Context: !in_interrupt()
- *
- * Allocates basic resources for this USB host controller, and
- * then invokes the start() method for the HCD associated with it
- * through the hotplug entry's driver_data.
- */
-static int usb_hcd_da8xx_probe(const struct hc_driver *driver,
-			       struct platform_device *pdev)
+static int ohci_da8xx_probe(struct platform_device *pdev)
 {
-	struct da8xx_ohci_root_hub *hub	= dev_get_platdata(&pdev->dev);
+	struct da8xx_ohci_hcd *da8xx_ohci;
 	struct usb_hcd	*hcd;
 	struct resource *mem;
 	int error, irq;
+	hcd = usb_create_hcd(&ohci_da8xx_hc_driver, &pdev->dev,
+				dev_name(&pdev->dev));
+	if (!hcd)
+		return -ENOMEM;
 
-	if (hub == NULL)
-		return -ENODEV;
+	da8xx_ohci = to_da8xx_ohci(hcd);
+	da8xx_ohci->hcd = hcd;
 
-	usb11_clk = devm_clk_get(&pdev->dev, "usb11");
-	if (IS_ERR(usb11_clk))
-		return PTR_ERR(usb11_clk);
+	da8xx_ohci->usb11_clk = devm_clk_get(&pdev->dev, "usb11");
+	if (IS_ERR(da8xx_ohci->usb11_clk)) {
+		error = PTR_ERR(da8xx_ohci->usb11_clk);
+		if (error != -EPROBE_DEFER)
+			dev_err(&pdev->dev, "Failed to get clock.\n");
+		goto err;
+	}
 
-	usb20_clk = devm_clk_get(&pdev->dev, "usb20");
-	if (IS_ERR(usb20_clk))
-		return PTR_ERR(usb20_clk);
+	da8xx_ohci->usb11_phy = devm_phy_get(&pdev->dev, "usb-phy");
+	if (IS_ERR(da8xx_ohci->usb11_phy)) {
+		error = PTR_ERR(da8xx_ohci->usb11_phy);
+		if (error != -EPROBE_DEFER)
+			dev_err(&pdev->dev, "Failed to get phy.\n");
+		goto err;
+	}
 
-	hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev));
-	if (!hcd)
-		return -ENOMEM;
+	da8xx_ohci->vbus_reg = devm_regulator_get_optional(&pdev->dev, "vbus");
+	if (IS_ERR(da8xx_ohci->vbus_reg)) {
+		error = PTR_ERR(da8xx_ohci->vbus_reg);
+		if (error == -ENODEV) {
+			da8xx_ohci->vbus_reg = NULL;
+		} else if (error == -EPROBE_DEFER) {
+			goto err;
+		} else {
+			dev_err(&pdev->dev, "Failed to get regulator\n");
+			goto err;
+		}
+	}
 
 	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	hcd->regs = devm_ioremap_resource(&pdev->dev, mem);
@@ -321,60 +454,38 @@ static int usb_hcd_da8xx_probe(const struct hc_driver *driver,
 	hcd->rsrc_start = mem->start;
 	hcd->rsrc_len = resource_size(mem);
 
-	ohci_hcd_init(hcd_to_ohci(hcd));
-
 	irq = platform_get_irq(pdev, 0);
 	if (irq < 0) {
 		error = -ENODEV;
 		goto err;
 	}
+
 	error = usb_add_hcd(hcd, irq, 0);
 	if (error)
 		goto err;
 
 	device_wakeup_enable(hcd->self.controller);
 
-	if (hub->ocic_notify) {
-		error = hub->ocic_notify(ohci_da8xx_ocic_handler);
-		if (!error)
-			return 0;
-	}
+	error = ohci_da8xx_register_notify(hcd);
+	if (error)
+		goto err_remove_hcd;
+
+	return 0;
 
+err_remove_hcd:
 	usb_remove_hcd(hcd);
 err:
 	usb_put_hcd(hcd);
 	return error;
 }
 
-/**
- * usb_hcd_da8xx_remove - shutdown processing for DA8xx-based HCDs
- * @dev: USB Host Controller being removed
- * Context: !in_interrupt()
- *
- * Reverses the effect of usb_hcd_da8xx_probe(), first invoking
- * the HCD's stop() method.  It is always called from a thread
- * context, normally "rmmod", "apmd", or something similar.
- */
-static inline void
-usb_hcd_da8xx_remove(struct usb_hcd *hcd, struct platform_device *pdev)
+static int ohci_da8xx_remove(struct platform_device *pdev)
 {
-	struct da8xx_ohci_root_hub *hub	= dev_get_platdata(&pdev->dev);
+	struct usb_hcd	*hcd = platform_get_drvdata(pdev);
 
-	hub->ocic_notify(NULL);
+	ohci_da8xx_unregister_notify(hcd);
 	usb_remove_hcd(hcd);
 	usb_put_hcd(hcd);
-}
-
-static int ohci_hcd_da8xx_drv_probe(struct platform_device *dev)
-{
-	return usb_hcd_da8xx_probe(&ohci_da8xx_hc_driver, dev);
-}
-
-static int ohci_hcd_da8xx_drv_remove(struct platform_device *dev)
-{
-	struct usb_hcd	*hcd = platform_get_drvdata(dev);
-
-	usb_hcd_da8xx_remove(hcd, dev);
 
 	return 0;
 }
@@ -397,7 +508,7 @@ static int ohci_da8xx_suspend(struct platform_device *pdev,
 	if (ret)
 		return ret;
 
-	ohci_da8xx_clock(0);
+	ohci_da8xx_disable(hcd);
 	hcd->state = HC_STATE_SUSPENDED;
 
 	return ret;
@@ -407,32 +518,77 @@ static int ohci_da8xx_resume(struct platform_device *dev)
 {
 	struct usb_hcd	*hcd	= platform_get_drvdata(dev);
 	struct ohci_hcd	*ohci	= hcd_to_ohci(hcd);
+	int ret;
 
 	if (time_before(jiffies, ohci->next_statechange))
 		msleep(5);
 	ohci->next_statechange = jiffies;
 
-	ohci_da8xx_clock(1);
-	dev->dev.power.power_state = PMSG_ON;
-	usb_hcd_resume_root_hub(hcd);
+	ret = ohci_da8xx_enable(hcd);
+	if (ret)
+		return ret;
+
+	ohci_resume(hcd, false);
+
 	return 0;
 }
 #endif
 
+static const struct ohci_driver_overrides da8xx_overrides __initconst = {
+	.reset		 = ohci_da8xx_reset,
+	.extra_priv_size = sizeof(struct da8xx_ohci_hcd),
+};
+
 /*
  * Driver definition to register with platform structure.
  */
 static struct platform_driver ohci_hcd_da8xx_driver = {
-	.probe		= ohci_hcd_da8xx_drv_probe,
-	.remove		= ohci_hcd_da8xx_drv_remove,
+	.probe		= ohci_da8xx_probe,
+	.remove		= ohci_da8xx_remove,
 	.shutdown 	= usb_hcd_platform_shutdown,
 #ifdef	CONFIG_PM
 	.suspend	= ohci_da8xx_suspend,
 	.resume		= ohci_da8xx_resume,
 #endif
 	.driver		= {
-		.name	= "ohci",
+		.name	= DRV_NAME,
+		.of_match_table = of_match_ptr(da8xx_ohci_ids),
 	},
 };
 
-MODULE_ALIAS("platform:ohci");
+static int __init ohci_da8xx_init(void)
+{
+
+	if (usb_disabled())
+		return -ENODEV;
+
+	pr_info("%s: " DRIVER_DESC "\n", DRV_NAME);
+	ohci_init_driver(&ohci_da8xx_hc_driver, &da8xx_overrides);
+
+	/*
+	 * The Davinci da8xx HW has some unusual quirks, which require
+	 * da8xx-specific workarounds. We override certain hc_driver
+	 * functions here to achieve that. We explicitly do not enhance
+	 * ohci_driver_overrides to allow this more easily, since this
+	 * is an unusual case, and we don't want to encourage others to
+	 * override these functions by making it too easy.
+	 */
+
+	orig_ohci_hub_control = ohci_da8xx_hc_driver.hub_control;
+	orig_ohci_hub_status_data = ohci_da8xx_hc_driver.hub_status_data;
+
+	ohci_da8xx_hc_driver.hub_status_data     = ohci_da8xx_hub_status_data;
+	ohci_da8xx_hc_driver.hub_control         = ohci_da8xx_hub_control;
+
+	return platform_driver_register(&ohci_hcd_da8xx_driver);
+}
+module_init(ohci_da8xx_init);
+
+static void __exit ohci_da8xx_exit(void)
+{
+	platform_driver_unregister(&ohci_hcd_da8xx_driver);
+}
+module_exit(ohci_da8xx_exit);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" DRV_NAME);