summaryrefslogtreecommitdiff
path: root/drivers/usb/gadget
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/gadget')
-rw-r--r--drivers/usb/gadget/Kconfig2
-rw-r--r--drivers/usb/gadget/atmel_usba_udc.c2
-rw-r--r--drivers/usb/gadget/f_fs.c1
-rw-r--r--drivers/usb/gadget/f_hid.c1
-rw-r--r--drivers/usb/gadget/goku_udc.h3
-rw-r--r--drivers/usb/gadget/u_ether.c1
-rw-r--r--drivers/usb/gadget/u_serial.c54
7 files changed, 44 insertions, 20 deletions
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index b739ca814651..607d0db4a988 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -158,7 +158,7 @@ config USB_GADGET_FSL_USB2
boolean "Freescale Highspeed USB DR Peripheral Controller"
depends on FSL_SOC || ARCH_MXC
select USB_GADGET_DUALSPEED
- select USB_FSL_MPH_DR_OF
+ select USB_FSL_MPH_DR_OF if OF
help
Some of Freescale PowerPC processors have a High Speed
Dual-Role(DR) USB controller, which supports device mode.
diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c
index b5e20e873cba..717ff653fa23 100644
--- a/drivers/usb/gadget/atmel_usba_udc.c
+++ b/drivers/usb/gadget/atmel_usba_udc.c
@@ -2017,7 +2017,7 @@ static int __init usba_udc_probe(struct platform_device *pdev)
}
} else {
/* gpio_request fail so use -EINVAL for gpio_is_valid */
- ubc->vbus_pin = -EINVAL;
+ udc->vbus_pin = -EINVAL;
}
}
diff --git a/drivers/usb/gadget/f_fs.c b/drivers/usb/gadget/f_fs.c
index 4a830df4fc31..484c5ba5450e 100644
--- a/drivers/usb/gadget/f_fs.c
+++ b/drivers/usb/gadget/f_fs.c
@@ -30,7 +30,6 @@
#include <linux/blkdev.h>
#include <linux/pagemap.h>
#include <asm/unaligned.h>
-#include <linux/smp_lock.h>
#include <linux/usb/composite.h>
#include <linux/usb/functionfs.h>
diff --git a/drivers/usb/gadget/f_hid.c b/drivers/usb/gadget/f_hid.c
index 4f891eddd060..598e7e2ab80c 100644
--- a/drivers/usb/gadget/f_hid.c
+++ b/drivers/usb/gadget/f_hid.c
@@ -25,7 +25,6 @@
#include <linux/cdev.h>
#include <linux/mutex.h>
#include <linux/poll.h>
-#include <linux/smp_lock.h>
#include <linux/uaccess.h>
#include <linux/wait.h>
#include <linux/usb/g_hid.h>
diff --git a/drivers/usb/gadget/goku_udc.h b/drivers/usb/gadget/goku_udc.h
index 566cb2319056..e7e0c69d3b1f 100644
--- a/drivers/usb/gadget/goku_udc.h
+++ b/drivers/usb/gadget/goku_udc.h
@@ -251,7 +251,8 @@ struct goku_udc {
got_region:1,
req_config:1,
configured:1,
- enabled:1;
+ enabled:1,
+ registered:1;
/* pci state used to access those endpoints */
struct pci_dev *pdev;
diff --git a/drivers/usb/gadget/u_ether.c b/drivers/usb/gadget/u_ether.c
index cb23355f52d3..fbe86ca95802 100644
--- a/drivers/usb/gadget/u_ether.c
+++ b/drivers/usb/gadget/u_ether.c
@@ -811,7 +811,6 @@ int gether_setup(struct usb_gadget *g, u8 ethaddr[ETH_ALEN])
INFO(dev, "MAC %pM\n", net->dev_addr);
INFO(dev, "HOST MAC %pM\n", dev->host_mac);
- netif_stop_queue(net);
the_dev = dev;
}
diff --git a/drivers/usb/gadget/u_serial.c b/drivers/usb/gadget/u_serial.c
index 01e5354a4c20..40f7716b31fc 100644
--- a/drivers/usb/gadget/u_serial.c
+++ b/drivers/usb/gadget/u_serial.c
@@ -105,11 +105,15 @@ struct gs_port {
wait_queue_head_t close_wait; /* wait for last close */
struct list_head read_pool;
+ int read_started;
+ int read_allocated;
struct list_head read_queue;
unsigned n_read;
struct tasklet_struct push;
struct list_head write_pool;
+ int write_started;
+ int write_allocated;
struct gs_buf port_write_buf;
wait_queue_head_t drain_wait; /* wait while writes drain */
@@ -363,6 +367,9 @@ __acquires(&port->port_lock)
struct usb_request *req;
int len;
+ if (port->write_started >= QUEUE_SIZE)
+ break;
+
req = list_entry(pool->next, struct usb_request, list);
len = gs_send_packet(port, req->buf, in->maxpacket);
if (len == 0) {
@@ -397,6 +404,8 @@ __acquires(&port->port_lock)
break;
}
+ port->write_started++;
+
/* abort immediately after disconnect */
if (!port->port_usb)
break;
@@ -418,7 +427,6 @@ __acquires(&port->port_lock)
{
struct list_head *pool = &port->read_pool;
struct usb_ep *out = port->port_usb->out;
- unsigned started = 0;
while (!list_empty(pool)) {
struct usb_request *req;
@@ -430,6 +438,9 @@ __acquires(&port->port_lock)
if (!tty)
break;
+ if (port->read_started >= QUEUE_SIZE)
+ break;
+
req = list_entry(pool->next, struct usb_request, list);
list_del(&req->list);
req->length = out->maxpacket;
@@ -447,13 +458,13 @@ __acquires(&port->port_lock)
list_add(&req->list, pool);
break;
}
- started++;
+ port->read_started++;
/* abort immediately after disconnect */
if (!port->port_usb)
break;
}
- return started;
+ return port->read_started;
}
/*
@@ -535,6 +546,7 @@ static void gs_rx_push(unsigned long _port)
}
recycle:
list_move(&req->list, &port->read_pool);
+ port->read_started--;
}
/* Push from tty to ldisc; without low_latency set this is handled by
@@ -587,6 +599,7 @@ static void gs_write_complete(struct usb_ep *ep, struct usb_request *req)
spin_lock(&port->port_lock);
list_add(&req->list, &port->write_pool);
+ port->write_started--;
switch (req->status) {
default:
@@ -608,7 +621,8 @@ static void gs_write_complete(struct usb_ep *ep, struct usb_request *req)
spin_unlock(&port->port_lock);
}
-static void gs_free_requests(struct usb_ep *ep, struct list_head *head)
+static void gs_free_requests(struct usb_ep *ep, struct list_head *head,
+ int *allocated)
{
struct usb_request *req;
@@ -616,25 +630,31 @@ static void gs_free_requests(struct usb_ep *ep, struct list_head *head)
req = list_entry(head->next, struct usb_request, list);
list_del(&req->list);
gs_free_req(ep, req);
+ if (allocated)
+ (*allocated)--;
}
}
static int gs_alloc_requests(struct usb_ep *ep, struct list_head *head,
- void (*fn)(struct usb_ep *, struct usb_request *))
+ void (*fn)(struct usb_ep *, struct usb_request *),
+ int *allocated)
{
int i;
struct usb_request *req;
+ int n = allocated ? QUEUE_SIZE - *allocated : QUEUE_SIZE;
/* Pre-allocate up to QUEUE_SIZE transfers, but if we can't
* do quite that many this time, don't fail ... we just won't
* be as speedy as we might otherwise be.
*/
- for (i = 0; i < QUEUE_SIZE; i++) {
+ for (i = 0; i < n; i++) {
req = gs_alloc_req(ep, ep->maxpacket, GFP_ATOMIC);
if (!req)
return list_empty(head) ? -ENOMEM : 0;
req->complete = fn;
list_add_tail(&req->list, head);
+ if (allocated)
+ (*allocated)++;
}
return 0;
}
@@ -661,14 +681,15 @@ static int gs_start_io(struct gs_port *port)
* configurations may use different endpoints with a given port;
* and high speed vs full speed changes packet sizes too.
*/
- status = gs_alloc_requests(ep, head, gs_read_complete);
+ status = gs_alloc_requests(ep, head, gs_read_complete,
+ &port->read_allocated);
if (status)
return status;
status = gs_alloc_requests(port->port_usb->in, &port->write_pool,
- gs_write_complete);
+ gs_write_complete, &port->write_allocated);
if (status) {
- gs_free_requests(ep, head);
+ gs_free_requests(ep, head, &port->read_allocated);
return status;
}
@@ -680,8 +701,9 @@ static int gs_start_io(struct gs_port *port)
if (started) {
tty_wakeup(port->port_tty);
} else {
- gs_free_requests(ep, head);
- gs_free_requests(port->port_usb->in, &port->write_pool);
+ gs_free_requests(ep, head, &port->read_allocated);
+ gs_free_requests(port->port_usb->in, &port->write_pool,
+ &port->write_allocated);
status = -EIO;
}
@@ -1315,8 +1337,12 @@ void gserial_disconnect(struct gserial *gser)
spin_lock_irqsave(&port->port_lock, flags);
if (port->open_count == 0 && !port->openclose)
gs_buf_free(&port->port_write_buf);
- gs_free_requests(gser->out, &port->read_pool);
- gs_free_requests(gser->out, &port->read_queue);
- gs_free_requests(gser->in, &port->write_pool);
+ gs_free_requests(gser->out, &port->read_pool, NULL);
+ gs_free_requests(gser->out, &port->read_queue, NULL);
+ gs_free_requests(gser->in, &port->write_pool, NULL);
+
+ port->read_allocated = port->read_started =
+ port->write_allocated = port->write_started = 0;
+
spin_unlock_irqrestore(&port->port_lock, flags);
}
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-22 11:19:30 +0300