diff options
Diffstat (limited to 'drivers/usb/gadget/s3c-hsotg.c')
| -rw-r--r-- | drivers/usb/gadget/s3c-hsotg.c | 1644 |
1 files changed, 942 insertions, 702 deletions
diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c index 69295ba9d99a..f4abb0ed9872 100644 --- a/drivers/usb/gadget/s3c-hsotg.c +++ b/drivers/usb/gadget/s3c-hsotg.c @@ -1,4 +1,5 @@ -/* linux/drivers/usb/gadget/s3c-hsotg.c +/** + * linux/drivers/usb/gadget/s3c-hsotg.c * * Copyright (c) 2011 Samsung Electronics Co., Ltd. * http://www.samsung.com @@ -13,7 +14,7 @@ * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. -*/ + */ #include <linux/kernel.h> #include <linux/module.h> @@ -27,21 +28,25 @@ #include <linux/io.h> #include <linux/slab.h> #include <linux/clk.h> +#include <linux/regulator/consumer.h> #include <linux/usb/ch9.h> #include <linux/usb/gadget.h> +#include <linux/platform_data/s3c-hsotg.h> #include <mach/map.h> -#include <plat/regs-usb-hsotg-phy.h> -#include <plat/regs-usb-hsotg.h> -#include <mach/regs-sys.h> -#include <plat/udc-hs.h> -#include <plat/cpu.h> +#include "s3c-hsotg.h" #define DMA_ADDR_INVALID (~((dma_addr_t)0)) -/* EP0_MPS_LIMIT +static const char * const s3c_hsotg_supply_names[] = { + "vusb_d", /* digital USB supply, 1.2V */ + "vusb_a", /* analog USB supply, 1.1V */ +}; + +/* + * EP0_MPS_LIMIT * * Unfortunately there seems to be a limit of the amount of data that can * be transferred by IN transactions on EP0. This is either 127 bytes or 3 @@ -125,8 +130,6 @@ struct s3c_hsotg_ep { char name[10]; }; -#define S3C_HSOTG_EPS (8+1) /* limit to 9 for the moment */ - /** * struct s3c_hsotg - driver state. * @dev: The parent device supplied to the probe function @@ -135,7 +138,9 @@ struct s3c_hsotg_ep { * @regs: The memory area mapped for accessing registers. * @regs_res: The resource that was allocated when claiming register space. * @irq: The IRQ number we are using + * @supplies: Definition of USB power supplies * @dedicated_fifos: Set if the hardware has dedicated IN-EP fifos. + * @num_of_eps: Number of available EPs (excluding EP0) * @debug_root: root directrory for debugfs. * @debug_file: main status file for debugfs. * @debug_fifo: FIFO status file for debugfs. @@ -143,6 +148,8 @@ struct s3c_hsotg_ep { * @ep0_buff: Buffer for EP0 reply data, if needed. * @ctrl_buff: Buffer for EP0 control requests. * @ctrl_req: Request for EP0 control packets. + * @setup: NAK management for EP0 SETUP + * @last_rst: Time of last reset * @eps: The endpoints being supplied to the gadget framework */ struct s3c_hsotg { @@ -155,7 +162,10 @@ struct s3c_hsotg { int irq; struct clk *clk; + struct regulator_bulk_data supplies[ARRAY_SIZE(s3c_hsotg_supply_names)]; + unsigned int dedicated_fifos:1; + unsigned char num_of_eps; struct dentry *debug_root; struct dentry *debug_file; @@ -167,7 +177,9 @@ struct s3c_hsotg { u8 ctrl_buff[8]; struct usb_gadget gadget; - struct s3c_hsotg_ep eps[]; + unsigned int setup; + unsigned long last_rst; + struct s3c_hsotg_ep *eps; }; /** @@ -244,14 +256,14 @@ static inline bool using_dma(struct s3c_hsotg *hsotg) */ static void s3c_hsotg_en_gsint(struct s3c_hsotg *hsotg, u32 ints) { - u32 gsintmsk = readl(hsotg->regs + S3C_GINTMSK); + u32 gsintmsk = readl(hsotg->regs + GINTMSK); u32 new_gsintmsk; new_gsintmsk = gsintmsk | ints; if (new_gsintmsk != gsintmsk) { dev_dbg(hsotg->dev, "gsintmsk now 0x%08x\n", new_gsintmsk); - writel(new_gsintmsk, hsotg->regs + S3C_GINTMSK); + writel(new_gsintmsk, hsotg->regs + GINTMSK); } } @@ -262,13 +274,13 @@ static void s3c_hsotg_en_gsint(struct s3c_hsotg *hsotg, u32 ints) */ static void s3c_hsotg_disable_gsint(struct s3c_hsotg *hsotg, u32 ints) { - u32 gsintmsk = readl(hsotg->regs + S3C_GINTMSK); + u32 gsintmsk = readl(hsotg->regs + GINTMSK); u32 new_gsintmsk; new_gsintmsk = gsintmsk & ~ints; if (new_gsintmsk != gsintmsk) - writel(new_gsintmsk, hsotg->regs + S3C_GINTMSK); + writel(new_gsintmsk, hsotg->regs + GINTMSK); } /** @@ -293,12 +305,12 @@ static void s3c_hsotg_ctrl_epint(struct s3c_hsotg *hsotg, bit <<= 16; local_irq_save(flags); - daint = readl(hsotg->regs + S3C_DAINTMSK); + daint = readl(hsotg->regs + DAINTMSK); if (en) daint |= bit; else daint &= ~bit; - writel(daint, hsotg->regs + S3C_DAINTMSK); + writel(daint, hsotg->regs + DAINTMSK); local_irq_restore(flags); } @@ -314,52 +326,51 @@ static void s3c_hsotg_init_fifo(struct s3c_hsotg *hsotg) int timeout; u32 val; - /* the ryu 2.6.24 release ahs - writel(0x1C0, hsotg->regs + S3C_GRXFSIZ); - writel(S3C_GNPTXFSIZ_NPTxFStAddr(0x200) | - S3C_GNPTXFSIZ_NPTxFDep(0x1C0), - hsotg->regs + S3C_GNPTXFSIZ); - */ - /* set FIFO sizes to 2048/1024 */ - writel(2048, hsotg->regs + S3C_GRXFSIZ); - writel(S3C_GNPTXFSIZ_NPTxFStAddr(2048) | - S3C_GNPTXFSIZ_NPTxFDep(1024), - hsotg->regs + S3C_GNPTXFSIZ); + writel(2048, hsotg->regs + GRXFSIZ); + writel(GNPTXFSIZ_NPTxFStAddr(2048) | + GNPTXFSIZ_NPTxFDep(1024), + hsotg->regs + GNPTXFSIZ); - /* arange all the rest of the TX FIFOs, as some versions of this + /* + * arange all the rest of the TX FIFOs, as some versions of this * block have overlapping default addresses. This also ensures * that if the settings have been changed, then they are set to - * known values. */ + * known values. + */ /* start at the end of the GNPTXFSIZ, rounded up */ addr = 2048 + 1024; size = 768; - /* currently we allocate TX FIFOs for all possible endpoints, - * and assume that they are all the same size. */ + /* + * currently we allocate TX FIFOs for all possible endpoints, + * and assume that they are all the same size. + */ - for (ep = 0; ep <= 15; ep++) { + for (ep = 1; ep <= 15; ep++) { val = addr; - val |= size << S3C_DPTXFSIZn_DPTxFSize_SHIFT; + val |= size << DPTXFSIZn_DPTxFSize_SHIFT; addr += size; - writel(val, hsotg->regs + S3C_DPTXFSIZn(ep)); + writel(val, hsotg->regs + DPTXFSIZn(ep)); } - /* according to p428 of the design guide, we need to ensure that - * all fifos are flushed before continuing */ + /* + * according to p428 of the design guide, we need to ensure that + * all fifos are flushed before continuing + */ - writel(S3C_GRSTCTL_TxFNum(0x10) | S3C_GRSTCTL_TxFFlsh | - S3C_GRSTCTL_RxFFlsh, hsotg->regs + S3C_GRSTCTL); + writel(GRSTCTL_TxFNum(0x10) | GRSTCTL_TxFFlsh | + GRSTCTL_RxFFlsh, hsotg->regs + GRSTCTL); /* wait until the fifos are both flushed */ timeout = 100; while (1) { - val = readl(hsotg->regs + S3C_GRSTCTL); + val = readl(hsotg->regs + GRSTCTL); - if ((val & (S3C_GRSTCTL_TxFFlsh | S3C_GRSTCTL_RxFFlsh)) == 0) + if ((val & (GRSTCTL_TxFFlsh | GRSTCTL_RxFFlsh)) == 0) break; if (--timeout == 0) { @@ -415,7 +426,7 @@ static inline int is_ep_periodic(struct s3c_hsotg_ep *hs_ep) * * This is the reverse of s3c_hsotg_map_dma(), called for the completion * of a request to ensure the buffer is ready for access by the caller. -*/ + */ static void s3c_hsotg_unmap_dma(struct s3c_hsotg *hsotg, struct s3c_hsotg_ep *hs_ep, struct s3c_hsotg_req *hs_req) @@ -456,13 +467,13 @@ static void s3c_hsotg_unmap_dma(struct s3c_hsotg *hsotg, * otherwise -ENOSPC is returned if the FIFO space was used up. * * This routine is only needed for PIO -*/ + */ static int s3c_hsotg_write_fifo(struct s3c_hsotg *hsotg, struct s3c_hsotg_ep *hs_ep, struct s3c_hsotg_req *hs_req) { bool periodic = is_ep_periodic(hs_ep); - u32 gnptxsts = readl(hsotg->regs + S3C_GNPTXSTS); + u32 gnptxsts = readl(hsotg->regs + GNPTXSTS); int buf_pos = hs_req->req.actual; int to_write = hs_ep->size_loaded; void *data; @@ -476,20 +487,23 @@ static int s3c_hsotg_write_fifo(struct s3c_hsotg *hsotg, return 0; if (periodic && !hsotg->dedicated_fifos) { - u32 epsize = readl(hsotg->regs + S3C_DIEPTSIZ(hs_ep->index)); + u32 epsize = readl(hsotg->regs + DIEPTSIZ(hs_ep->index)); int size_left; int size_done; - /* work out how much data was loaded so we can calculate - * how much data is left in the fifo. */ + /* + * work out how much data was loaded so we can calculate + * how much data is left in the fifo. + */ - size_left = S3C_DxEPTSIZ_XferSize_GET(epsize); + size_left = DxEPTSIZ_XferSize_GET(epsize); - /* if shared fifo, we cannot write anything until the + /* + * if shared fifo, we cannot write anything until the * previous data has been completely sent. */ if (hs_ep->fifo_load != 0) { - s3c_hsotg_en_gsint(hsotg, S3C_GINTSTS_PTxFEmp); + s3c_hsotg_en_gsint(hsotg, GINTSTS_PTxFEmp); return -ENOSPC; } @@ -510,47 +524,50 @@ static int s3c_hsotg_write_fifo(struct s3c_hsotg *hsotg, __func__, can_write); if (can_write <= 0) { - s3c_hsotg_en_gsint(hsotg, S3C_GINTSTS_PTxFEmp); + s3c_hsotg_en_gsint(hsotg, GINTSTS_PTxFEmp); return -ENOSPC; } } else if (hsotg->dedicated_fifos && hs_ep->index != 0) { - can_write = readl(hsotg->regs + S3C_DTXFSTS(hs_ep->index)); + can_write = readl(hsotg->regs + DTXFSTS(hs_ep->index)); can_write &= 0xffff; can_write *= 4; } else { - if (S3C_GNPTXSTS_NPTxQSpcAvail_GET(gnptxsts) == 0) { + if (GNPTXSTS_NPTxQSpcAvail_GET(gnptxsts) == 0) { dev_dbg(hsotg->dev, "%s: no queue slots available (0x%08x)\n", __func__, gnptxsts); - s3c_hsotg_en_gsint(hsotg, S3C_GINTSTS_NPTxFEmp); + s3c_hsotg_en_gsint(hsotg, GINTSTS_NPTxFEmp); return -ENOSPC; } - can_write = S3C_GNPTXSTS_NPTxFSpcAvail_GET(gnptxsts); + can_write = GNPTXSTS_NPTxFSpcAvail_GET(gnptxsts); can_write *= 4; /* fifo size is in 32bit quantities. */ } dev_dbg(hsotg->dev, "%s: GNPTXSTS=%08x, can=%d, to=%d, mps %d\n", __func__, gnptxsts, can_write, to_write, hs_ep->ep.maxpacket); - /* limit to 512 bytes of data, it seems at least on the non-periodic + /* + * limit to 512 bytes of data, it seems at least on the non-periodic * FIFO, requests of >512 cause the endpoint to get stuck with a * fragment of the end of the transfer in it. */ if (can_write > 512) can_write = 512; - /* limit the write to one max-packet size worth of data, but allow + /* + * limit the write to one max-packet size worth of data, but allow * the transfer to return that it did not run out of fifo space - * doing it. */ + * doing it. + */ if (to_write > hs_ep->ep.maxpacket) { to_write = hs_ep->ep.maxpacket; s3c_hsotg_en_gsint(hsotg, - periodic ? S3C_GINTSTS_PTxFEmp : - S3C_GINTSTS_NPTxFEmp); + periodic ? GINTSTS_PTxFEmp : + GINTSTS_NPTxFEmp); } /* see if we can write data */ @@ -559,8 +576,8 @@ static int s3c_hsotg_write_fifo(struct s3c_hsotg *hsotg, to_write = can_write; pkt_round = to_write % hs_ep->ep.maxpacket; - /* Not sure, but we probably shouldn't be writing partial - * packets into the FIFO, so round the write down to an + /* + * Round the write down to an * exact number of packets. * * Note, we do not currently check to see if we can ever @@ -570,12 +587,14 @@ static int s3c_hsotg_write_fifo(struct s3c_hsotg *hsotg, if (pkt_round) to_write -= pkt_round; - /* enable correct FIFO interrupt to alert us when there - * is more room left. */ + /* + * enable correct FIFO interrupt to alert us when there + * is more room left. + */ s3c_hsotg_en_gsint(hsotg, - periodic ? S3C_GINTSTS_PTxFEmp : - S3C_GINTSTS_NPTxFEmp); + periodic ? GINTSTS_PTxFEmp : + GINTSTS_NPTxFEmp); } dev_dbg(hsotg->dev, "write %d/%d, can_write %d, done %d\n", @@ -593,7 +612,7 @@ static int s3c_hsotg_write_fifo(struct s3c_hsotg *hsotg, to_write = DIV_ROUND_UP(to_write, 4); data = hs_req->req.buf + buf_pos; - writesl(hsotg->regs + S3C_EPFIFO(hs_ep->index), data, to_write); + writesl(hsotg->regs + EPFIFO(hs_ep->index), data, to_write); return (to_write >= can_write) ? -ENOSPC : 0; } @@ -612,12 +631,12 @@ static unsigned get_ep_limit(struct s3c_hsotg_ep *hs_ep) unsigned maxpkt; if (index != 0) { - maxsize = S3C_DxEPTSIZ_XferSize_LIMIT + 1; - maxpkt = S3C_DxEPTSIZ_PktCnt_LIMIT + 1; + maxsize = DxEPTSIZ_XferSize_LIMIT + 1; + maxpkt = DxEPTSIZ_PktCnt_LIMIT + 1; } else { maxsize = 64+64; if (hs_ep->dir_in) - maxpkt = S3C_DIEPTSIZ0_PktCnt_LIMIT + 1; + maxpkt = DIEPTSIZ0_PktCnt_LIMIT + 1; else maxpkt = 2; } @@ -626,8 +645,10 @@ static unsigned get_ep_limit(struct s3c_hsotg_ep *hs_ep) maxpkt--; maxsize--; - /* constrain by packet count if maxpkts*pktsize is greater - * than the length register size. */ + /* + * constrain by packet count if maxpkts*pktsize is greater + * than the length register size. + */ if ((maxpkt * hs_ep->ep.maxpacket) < maxsize) maxsize = maxpkt * hs_ep->ep.maxpacket; @@ -674,8 +695,8 @@ static void s3c_hsotg_start_req(struct s3c_hsotg *hsotg, } } - epctrl_reg = dir_in ? S3C_DIEPCTL(index) : S3C_DOEPCTL(index); - epsize_reg = dir_in ? S3C_DIEPTSIZ(index) : S3C_DOEPTSIZ(index); + epctrl_reg = dir_in ? DIEPCTL(index) : DOEPCTL(index); + epsize_reg = dir_in ? DIEPTSIZ(index) : DOEPTSIZ(index); dev_dbg(hsotg->dev, "%s: DxEPCTL=0x%08x, ep %d, dir %s\n", __func__, readl(hsotg->regs + epctrl_reg), index, @@ -684,13 +705,14 @@ static void s3c_hsotg_start_req(struct s3c_hsotg *hsotg, /* If endpoint is stalled, we will restart request later */ ctrl = readl(hsotg->regs + epctrl_reg); - if (ctrl & S3C_DxEPCTL_Stall) { + if (ctrl & DxEPCTL_Stall) { dev_warn(hsotg->dev, "%s: ep%d is stalled\n", __func__, index); return; } length = ureq->length - ureq->actual; - + dev_dbg(hsotg->dev, "ureq->length:%d ureq->actual:%d\n", + ureq->length, ureq->actual); if (0) dev_dbg(hsotg->dev, "REQ buf %p len %d dma 0x%08x noi=%d zp=%d snok=%d\n", @@ -717,20 +739,22 @@ static void s3c_hsotg_start_req(struct s3c_hsotg *hsotg, packets = 1; /* send one packet if length is zero. */ if (dir_in && index != 0) - epsize = S3C_DxEPTSIZ_MC(1); + epsize = DxEPTSIZ_MC(1); else epsize = 0; if (index != 0 && ureq->zero) { - /* test for the packets being exactly right for the - * transfer */ + /* + * test for the packets being exactly right for the + * transfer + */ if (length == (packets * hs_ep->ep.maxpacket)) packets++; } - epsize |= S3C_DxEPTSIZ_PktCnt(packets); - epsize |= S3C_DxEPTSIZ_XferSize(length); + epsize |= DxEPTSIZ_PktCnt(packets); + epsize |= DxEPTSIZ_XferSize(length); dev_dbg(hsotg->dev, "%s: %d@%d/%d, 0x%08x => 0x%08x\n", __func__, packets, length, ureq->length, epsize, epsize_reg); @@ -741,29 +765,41 @@ static void s3c_hsotg_start_req(struct s3c_hsotg *hsotg, /* write size / packets */ writel(epsize, hsotg->regs + epsize_reg); - if (using_dma(hsotg)) { + if (using_dma(hsotg) && !continuing) { unsigned int dma_reg; - /* write DMA address to control register, buffer already - * synced by s3c_hsotg_ep_queue(). */ + /* + * write DMA address to control register, buffer already + * synced by s3c_hsotg_ep_queue(). + */ - dma_reg = dir_in ? S3C_DIEPDMA(index) : S3C_DOEPDMA(index); + dma_reg = dir_in ? DIEPDMA(index) : DOEPDMA(index); writel(ureq->dma, hsotg->regs + dma_reg); dev_dbg(hsotg->dev, "%s: 0x%08x => 0x%08x\n", __func__, ureq->dma, dma_reg); } - ctrl |= S3C_DxEPCTL_EPEna; /* ensure ep enabled */ - ctrl |= S3C_DxEPCTL_USBActEp; - ctrl |= S3C_DxEPCTL_CNAK; /* clear NAK set by core */ + ctrl |= DxEPCTL_EPEna; /* ensure ep enabled */ + ctrl |= DxEPCTL_USBActEp; + + dev_dbg(hsotg->dev, "setup req:%d\n", hsotg->setup); + + /* For Setup request do not clear NAK */ + if (hsotg->setup && index == 0) + hsotg->setup = 0; + else + ctrl |= DxEPCTL_CNAK; /* clear NAK set by core */ + dev_dbg(hsotg->dev, "%s: DxEPCTL=0x%08x\n", __func__, ctrl); writel(ctrl, hsotg->regs + epctrl_reg); - /* set these, it seems that DMA support increments past the end + /* + * set these, it seems that DMA support increments past the end * of the packet buffer so we need to calculate the length from - * this information. */ + * this information. + */ hs_ep->size_loaded = length; hs_ep->last_load = ureq->actual; @@ -774,17 +810,21 @@ static void s3c_hsotg_start_req(struct s3c_hsotg *hsotg, s3c_hsotg_write_fifo(hsotg, hs_ep, hs_req); } - /* clear the INTknTXFEmpMsk when we start request, more as a aide - * to debugging to see what is going on. */ + /* + * clear the INTknTXFEmpMsk when we start request, more as a aide + * to debugging to see what is going on. + */ if (dir_in) - writel(S3C_DIEPMSK_INTknTXFEmpMsk, - hsotg->regs + S3C_DIEPINT(index)); + writel(DIEPMSK_INTknTXFEmpMsk, + hsotg->regs + DIEPINT(index)); - /* Note, trying to clear the NAK here causes problems with transmit - * on the S3C6400 ending up with the TXFIFO becoming full. */ + /* + * Note, trying to clear the NAK here causes problems with transmit + * on the S3C6400 ending up with the TXFIFO becoming full. + */ /* check ep is enabled */ - if (!(readl(hsotg->regs + epctrl_reg) & S3C_DxEPCTL_EPEna)) + if (!(readl(hsotg->regs + epctrl_reg) & DxEPCTL_EPEna)) dev_warn(hsotg->dev, "ep%d: failed to become enabled (DxEPCTL=0x%08x)?\n", index, readl(hsotg->regs + epctrl_reg)); @@ -804,7 +844,7 @@ static void s3c_hsotg_start_req(struct s3c_hsotg *hsotg, * then ensure the buffer has been synced to memory. If our buffer has no * DMA memory, then we map the memory and mark our request to allow us to * cleanup on completion. -*/ + */ static int s3c_hsotg_map_dma(struct s3c_hsotg *hsotg, struct s3c_hsotg_ep *hs_ep, struct usb_request *req) @@ -922,7 +962,7 @@ static void s3c_hsotg_complete_oursetup(struct usb_ep *ep, * * Convert the given wIndex into a pointer to an driver endpoint * structure, or return NULL if it is not a valid endpoint. -*/ + */ static struct s3c_hsotg_ep *ep_from_windex(struct s3c_hsotg *hsotg, u32 windex) { @@ -933,7 +973,7 @@ static struct s3c_hsotg_ep *ep_from_windex(struct s3c_hsotg *hsotg, if (windex >= 0x100) return NULL; - if (idx > S3C_HSOTG_EPS) + if (idx > hsotg->num_of_eps) return NULL; if (idx && ep->dir_in != dir) @@ -1151,24 +1191,28 @@ static void s3c_hsotg_process_control(struct s3c_hsotg *hsotg, ctrl->bRequest, ctrl->bRequestType, ctrl->wValue, ctrl->wLength); - /* record the direction of the request, for later use when enquing - * packets onto EP0. */ + /* + * record the direction of the request, for later use when enquing + * packets onto EP0. + */ ep0->dir_in = (ctrl->bRequestType & USB_DIR_IN) ? 1 : 0; dev_dbg(hsotg->dev, "ctrl: dir_in=%d\n", ep0->dir_in); - /* if we've no data with this request, then the last part of the - * transaction is going to implicitly be IN. */ + /* + * if we've no data with this request, then the last part of the + * transaction is going to implicitly be IN. + */ if (ctrl->wLength == 0) ep0->dir_in = 1; if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) { switch (ctrl->bRequest) { case USB_REQ_SET_ADDRESS: - dcfg = readl(hsotg->regs + S3C_DCFG); - dcfg &= ~S3C_DCFG_DevAddr_MASK; - dcfg |= ctrl->wValue << S3C_DCFG_DevAddr_SHIFT; - writel(dcfg, hsotg->regs + S3C_DCFG); + dcfg = readl(hsotg->regs + DCFG); + dcfg &= ~DCFG_DevAddr_MASK; + dcfg |= ctrl->wValue << DCFG_DevAddr_SHIFT; + writel(dcfg, hsotg->regs + DCFG); dev_info(hsotg->dev, "new address %d\n", ctrl->wValue); @@ -1194,7 +1238,8 @@ static void s3c_hsotg_process_control(struct s3c_hsotg *hsotg, dev_dbg(hsotg->dev, "driver->setup() ret %d\n", ret); } - /* the request is either unhandlable, or is not formatted correctly + /* + * the request is either unhandlable, or is not formatted correctly * so respond with a STALL for the status stage to indicate failure. */ @@ -1203,22 +1248,26 @@ static void s3c_hsotg_process_control(struct s3c_hsotg *hsotg, u32 ctrl; dev_dbg(hsotg->dev, "ep0 stall (dir=%d)\n", ep0->dir_in); - reg = (ep0->dir_in) ? S3C_DIEPCTL0 : S3C_DOEPCTL0; + reg = (ep0->dir_in) ? DIEPCTL0 : DOEPCTL0; - /* S3C_DxEPCTL_Stall will be cleared by EP once it has - * taken effect, so no need to clear later. */ + /* + * DxEPCTL_Stall will be cleared by EP once it has + * taken effect, so no need to clear later. + */ ctrl = readl(hsotg->regs + reg); - ctrl |= S3C_DxEPCTL_Stall; - ctrl |= S3C_DxEPCTL_CNAK; + ctrl |= DxEPCTL_Stall; + ctrl |= DxEPCTL_CNAK; writel(ctrl, hsotg->regs + reg); dev_dbg(hsotg->dev, "written DxEPCTL=0x%08x to %08x (DxEPCTL=0x%08x)\n", ctrl, reg, readl(hsotg->regs + reg)); - /* don't believe we need to anything more to get the EP - * to reply with a STALL packet */ + /* + * don't believe we need to anything more to get the EP + * to reply with a STALL packet + */ } } @@ -1279,8 +1328,10 @@ static void s3c_hsotg_enqueue_setup(struct s3c_hsotg *hsotg) ret = s3c_hsotg_ep_queue(&hsotg->eps[0].ep, req, GFP_ATOMIC); if (ret < 0) { dev_err(hsotg->dev, "%s: failed queue (%d)\n", __func__, ret); - /* Don't think there's much we can do other than watch the - * driver fail. */ + /* + * Don't think there's much we can do other than watch the + * driver fail. + */ } } @@ -1296,7 +1347,7 @@ static void s3c_hsotg_enqueue_setup(struct s3c_hsotg *hsotg) * on the endpoint. * * Note, expects the ep to already be locked as appropriate. -*/ + */ static void s3c_hsotg_complete_request(struct s3c_hsotg *hsotg, struct s3c_hsotg_ep *hs_ep, struct s3c_hsotg_req *hs_req, @@ -1312,8 +1363,10 @@ static void s3c_hsotg_complete_request(struct s3c_hsotg *hsotg, dev_dbg(hsotg->dev, "complete: ep %p %s, req %p, %d => %p\n", hs_ep, hs_ep->ep.name, hs_req, result, hs_req->req.complete); - /* only replace the status if we've not already set an error - * from a previous transaction */ + /* + * only replace the status if we've not already set an error + * from a previous transaction + */ if (hs_req->req.status == -EINPROGRESS) hs_req->req.status = result; @@ -1324,8 +1377,10 @@ static void s3c_hsotg_complete_request(struct s3c_hsotg *hsotg, if (using_dma(hsotg)) s3c_hsotg_unmap_dma(hsotg, hs_ep, hs_req); - /* call the complete request with the locks off, just in case the - * request tries to queue more work for this endpoint. */ + /* + * call the complete request with the locks off, just in case the + * request tries to queue more work for this endpoint. + */ if (hs_req->req.complete) { spin_unlock(&hs_ep->lock); @@ -1333,9 +1388,11 @@ static void s3c_hsotg_complete_request(struct s3c_hsotg *hsotg, spin_lock(&hs_ep->lock); } - /* Look to see if there is anything else to do. Note, the completion + /* + * Look to see if there is anything else to do. Note, the completion * of the previous request may have caused a new request to be started - * so be careful when doing this. */ + * so be careful when doing this. + */ if (!hs_ep->req && result >= 0) { restart = !list_empty(&hs_ep->queue); @@ -1355,7 +1412,7 @@ static void s3c_hsotg_complete_request(struct s3c_hsotg *hsotg, * * See s3c_hsotg_complete_request(), but called with the endpoint's * lock held. -*/ + */ static void s3c_hsotg_complete_request_lock(struct s3c_hsotg *hsotg, struct s3c_hsotg_ep *hs_ep, struct s3c_hsotg_req *hs_req, @@ -1382,13 +1439,13 @@ static void s3c_hsotg_rx_data(struct s3c_hsotg *hsotg, int ep_idx, int size) { struct s3c_hsotg_ep *hs_ep = &hsotg->eps[ep_idx]; struct s3c_hsotg_req *hs_req = hs_ep->req; - void __iomem *fifo = hsotg->regs + S3C_EPFIFO(ep_idx); + void __iomem *fifo = hsotg->regs + EPFIFO(ep_idx); int to_read; int max_req; int read_ptr; if (!hs_req) { - u32 epctl = readl(hsotg->regs + S3C_DOEPCTL(ep_idx)); + u32 epctl = readl(hsotg->regs + DOEPCTL(ep_idx)); int ptr; dev_warn(hsotg->dev, @@ -1412,7 +1469,8 @@ static void s3c_hsotg_rx_data(struct s3c_hsotg *hsotg, int ep_idx, int size) __func__, to_read, max_req, read_ptr, hs_req->req.length); if (to_read > max_req) { - /* more data appeared than we where willing + /* + * more data appeared than we where willing * to deal with in this request. */ @@ -1424,8 +1482,10 @@ static void s3c_hsotg_rx_data(struct s3c_hsotg *hsotg, int ep_idx, int size) hs_req->req.actual += to_read; to_read = DIV_ROUND_UP(to_read, 4); - /* note, we might over-write the buffer end by 3 bytes depending on - * alignment of the data. */ + /* + * note, we might over-write the buffer end by 3 bytes depending on + * alignment of the data. + */ readsl(fifo, hs_req->req.buf + read_ptr, to_read); spin_unlock(&hs_ep->lock); @@ -1465,14 +1525,14 @@ static void s3c_hsotg_send_zlp(struct s3c_hsotg *hsotg, dev_dbg(hsotg->dev, "sending zero-length packet\n"); /* issue a zero-sized packet to terminate this */ - writel(S3C_DxEPTSIZ_MC(1) | S3C_DxEPTSIZ_PktCnt(1) | - S3C_DxEPTSIZ_XferSize(0), hsotg->regs + S3C_DIEPTSIZ(0)); + writel(DxEPTSIZ_MC(1) | DxEPTSIZ_PktCnt(1) | + DxEPTSIZ_XferSize(0), hsotg->regs + DIEPTSIZ(0)); - ctrl = readl(hsotg->regs + S3C_DIEPCTL0); - ctrl |= S3C_DxEPCTL_CNAK; /* clear NAK set by core */ - ctrl |= S3C_DxEPCTL_EPEna; /* ensure ep enabled */ - ctrl |= S3C_DxEPCTL_USBActEp; - writel(ctrl, hsotg->regs + S3C_DIEPCTL0); + ctrl = readl(hsotg->regs + DIEPCTL0); + ctrl |= DxEPCTL_CNAK; /* clear NAK set by core */ + ctrl |= DxEPCTL_EPEna; /* ensure ep enabled */ + ctrl |= DxEPCTL_USBActEp; + writel(ctrl, hsotg->regs + DIEPCTL0); } /** @@ -1484,15 +1544,15 @@ static void s3c_hsotg_send_zlp(struct s3c_hsotg *hsotg, * The RXFIFO has delivered an OutDone event, which means that the data * transfer for an OUT endpoint has been completed, either by a short * packet or by the finish of a transfer. -*/ + */ static void s3c_hsotg_handle_outdone(struct s3c_hsotg *hsotg, int epnum, bool was_setup) { - u32 epsize = readl(hsotg->regs + S3C_DOEPTSIZ(epnum)); + u32 epsize = readl(hsotg->regs + DOEPTSIZ(epnum)); struct s3c_hsotg_ep *hs_ep = &hsotg->eps[epnum]; struct s3c_hsotg_req *hs_req = hs_ep->req; struct usb_request *req = &hs_req->req; - unsigned size_left = S3C_DxEPTSIZ_XferSize_GET(epsize); + unsigned size_left = DxEPTSIZ_XferSize_GET(epsize); int result = 0; if (!hs_req) { @@ -1503,7 +1563,8 @@ static void s3c_hsotg_handle_outdone(struct s3c_hsotg *hsotg, if (using_dma(hsotg)) { unsigned size_done; - /* Calculate the size of the transfer by checking how much + /* + * Calculate the size of the transfer by checking how much * is left in the endpoint size register and then working it * out from the amount we loaded for the transfer. * @@ -1521,17 +1582,29 @@ static void s3c_hsotg_handle_outdone(struct s3c_hsotg *hsotg, if (req->actual < req->length && size_left == 0) { s3c_hsotg_start_req(hsotg, hs_ep, hs_req, true); return; + } else if (epnum == 0) { + /* + * After was_setup = 1 => + * set CNAK for non Setup requests + */ + hsotg->setup = was_setup ? 0 : 1; } if (req->actual < req->length && req->short_not_ok) { dev_dbg(hsotg->dev, "%s: got %d/%d (short not ok) => error\n", __func__, req->actual, req->length); - /* todo - what should we return here? there's no one else - * even bothering to check the status. */ + /* + * todo - what should we return here? there's no one else + * even bothering to check the status. + */ } if (epnum == 0) { + /* + * Condition req->complete != s3c_hsotg_complete_setup says: + * send ZLP when we have an asynchronous request from gadget + */ if (!was_setup && req->complete != s3c_hsotg_complete_setup) s3c_hsotg_send_zlp(hsotg, hs_req); } @@ -1544,14 +1617,14 @@ static void s3c_hsotg_handle_outdone(struct s3c_hsotg *hsotg, * @hsotg: The device instance * * Return the current frame number -*/ + */ static u32 s3c_hsotg_read_frameno(struct s3c_hsotg *hsotg) { u32 dsts; - dsts = readl(hsotg->regs + S3C_DSTS); - dsts &= S3C_DSTS_SOFFN_MASK; - dsts >>= S3C_DSTS_SOFFN_SHIFT; + dsts = readl(hsotg->regs + DSTS); + dsts &= DSTS_SOFFN_MASK; + dsts >>= DSTS_SOFFN_SHIFT; return dsts; } @@ -1574,29 +1647,29 @@ static u32 s3c_hsotg_read_frameno(struct s3c_hsotg *hsotg) */ static void s3c_hsotg_handle_rx(struct s3c_hsotg *hsotg) { - u32 grxstsr = readl(hsotg->regs + S3C_GRXSTSP); + u32 grxstsr = readl(hsotg->regs + GRXSTSP); u32 epnum, status, size; WARN_ON(using_dma(hsotg)); - epnum = grxstsr & S3C_GRXSTS_EPNum_MASK; - status = grxstsr & S3C_GRXSTS_PktSts_MASK; + epnum = grxstsr & GRXSTS_EPNum_MASK; + status = grxstsr & GRXSTS_PktSts_MASK; - size = grxstsr & S3C_GRXSTS_ByteCnt_MASK; - size >>= S3C_GRXSTS_ByteCnt_SHIFT; + size = grxstsr & GRXSTS_ByteCnt_MASK; + size >>= GRXSTS_ByteCnt_SHIFT; if (1) dev_dbg(hsotg->dev, "%s: GRXSTSP=0x%08x (%d@%d)\n", __func__, grxstsr, size, epnum); -#define __status(x) ((x) >> S3C_GRXSTS_PktSts_SHIFT) +#define __status(x) ((x) >> GRXSTS_PktSts_SHIFT) - switch (status >> S3C_GRXSTS_PktSts_SHIFT) { - case __status(S3C_GRXSTS_PktSts_GlobalOutNAK): + switch (status >> GRXSTS_PktSts_SHIFT) { + case __status(GRXSTS_PktSts_GlobalOutNAK): dev_dbg(hsotg->dev, "GlobalOutNAK\n"); break; - case __status(S3C_GRXSTS_PktSts_OutDone): + case __status(GRXSTS_PktSts_OutDone): dev_dbg(hsotg->dev, "OutDone (Frame=0x%08x)\n", s3c_hsotg_read_frameno(hsotg)); @@ -1604,24 +1677,24 @@ static void s3c_hsotg_handle_rx(struct s3c_hsotg *hsotg) s3c_hsotg_handle_outdone(hsotg, epnum, false); break; - case __status(S3C_GRXSTS_PktSts_SetupDone): + case __status(GRXSTS_PktSts_SetupDone): dev_dbg(hsotg->dev, "SetupDone (Frame=0x%08x, DOPEPCTL=0x%08x)\n", s3c_hsotg_read_frameno(hsotg), - readl(hsotg->regs + S3C_DOEPCTL(0))); + readl(hsotg->regs + DOEPCTL(0))); s3c_hsotg_handle_outdone(hsotg, epnum, true); break; - case __status(S3C_GRXSTS_PktSts_OutRX): + case __status(GRXSTS_PktSts_OutRX): s3c_hsotg_rx_data(hsotg, epnum, size); break; - case __status(S3C_GRXSTS_PktSts_SetupRX): + case __status(GRXSTS_PktSts_SetupRX): dev_dbg(hsotg->dev, "SetupRX (Frame=0x%08x, DOPEPCTL=0x%08x)\n", s3c_hsotg_read_frameno(hsotg), - readl(hsotg->regs + S3C_DOEPCTL(0))); + readl(hsotg->regs + DOEPCTL(0))); s3c_hsotg_rx_data(hsotg, epnum, size); break; @@ -1638,18 +1711,18 @@ static void s3c_hsotg_handle_rx(struct s3c_hsotg *hsotg) /** * s3c_hsotg_ep0_mps - turn max packet size into register setting * @mps: The maximum packet size in bytes. -*/ + */ static u32 s3c_hsotg_ep0_mps(unsigned int mps) { switch (mps) { case 64: - return S3C_D0EPCTL_MPS_64; + return D0EPCTL_MPS_64; case 32: - return S3C_D0EPCTL_MPS_32; + return D0EPCTL_MPS_32; case 16: - return S3C_D0EPCTL_MPS_16; + return D0EPCTL_MPS_16; case 8: - return S3C_D0EPCTL_MPS_8; + return D0EPCTL_MPS_8; } /* bad max packet size, warn and return invalid result */ @@ -1680,7 +1753,7 @@ static void s3c_hsotg_set_ep_maxpacket(struct s3c_hsotg *hsotg, if (mpsval > 3) goto bad_mps; } else { - if (mps >= S3C_DxEPCTL_MPS_LIMIT+1) + if (mps >= DxEPCTL_MPS_LIMIT+1) goto bad_mps; mpsval = mps; @@ -1688,18 +1761,22 @@ static void s3c_hsotg_set_ep_maxpacket(struct s3c_hsotg *hsotg, hs_ep->ep.maxpacket = mps; - /* update both the in and out endpoint controldir_ registers, even - * if one of the directions may not be in use. */ + /* + * update both the in and out endpoint controldir_ registers, even + * if one of the directions may not be in use. + */ - reg = readl(regs + S3C_DIEPCTL(ep)); - reg &= ~S3C_DxEPCTL_MPS_MASK; + reg = readl(regs + DIEPCTL(ep)); + reg &= ~DxEPCTL_MPS_MASK; reg |= mpsval; - writel(reg, regs + S3C_DIEPCTL(ep)); + writel(reg, regs + DIEPCTL(ep)); - reg = readl(regs + S3C_DOEPCTL(ep)); - reg &= ~S3C_DxEPCTL_MPS_MASK; - reg |= mpsval; - writel(reg, regs + S3C_DOEPCTL(ep)); + if (ep) { + reg = readl(regs + DOEPCTL(ep)); + reg &= ~DxEPCTL_MPS_MASK; + reg |= mpsval; + writel(reg, regs + DOEPCTL(ep)); + } return; @@ -1717,16 +1794,16 @@ static void s3c_hsotg_txfifo_flush(struct s3c_hsotg *hsotg, unsigned int idx) int timeout; int val; - writel(S3C_GRSTCTL_TxFNum(idx) | S3C_GRSTCTL_TxFFlsh, - hsotg->regs + S3C_GRSTCTL); + writel(GRSTCTL_TxFNum(idx) | GRSTCTL_TxFFlsh, + hsotg->regs + GRSTCTL); /* wait until the fifo is flushed */ timeout = 100; while (1) { - val = readl(hsotg->regs + S3C_GRSTCTL); + val = readl(hsotg->regs + GRSTCTL); - if ((val & (S3C_GRSTCTL_TxFFlsh)) == 0) + if ((val & (GRSTCTL_TxFFlsh)) == 0) break; if (--timeout == 0) { @@ -1776,7 +1853,7 @@ static void s3c_hsotg_complete_in(struct s3c_hsotg *hsotg, struct s3c_hsotg_ep *hs_ep) { struct s3c_hsotg_req *hs_req = hs_ep->req; - u32 epsize = readl(hsotg->regs + S3C_DIEPTSIZ(hs_ep->index)); + u32 epsize = readl(hsotg->regs + DIEPTSIZ(hs_ep->index)); int size_left, size_done; if (!hs_req) { @@ -1784,7 +1861,15 @@ static void s3c_hsotg_complete_in(struct s3c_hsotg *hsotg, return; } - /* Calculate the size of the transfer by checking how much is left + /* Finish ZLP handling for IN EP0 transactions */ + if (hsotg->eps[0].sent_zlp) { + dev_dbg(hsotg->dev, "zlp packet received\n"); + s3c_hsotg_complete_request_lock(hsotg, hs_ep, hs_req, 0); + return; + } + + /* + * Calculate the size of the transfer by checking how much is left * in the endpoint size register and then working it out from * the amount we loaded for the transfer. * @@ -1793,7 +1878,7 @@ static void s3c_hsotg_complete_in(struct s3c_hsotg *hsotg, * aligned). */ - size_left = S3C_DxEPTSIZ_XferSize_GET(epsize); + size_left = DxEPTSIZ_XferSize_GET(epsize); size_done = hs_ep->size_loaded - size_left; size_done += hs_ep->last_load; @@ -1803,9 +1888,28 @@ static void s3c_hsotg_complete_in(struct s3c_hsotg *hsotg, __func__, hs_req->req.actual, size_done); hs_req->req.actual = size_done; + dev_dbg(hsotg->dev, "req->length:%d req->actual:%d req->zero:%d\n", + hs_req->req.length, hs_req->req.actual, hs_req->req.zero); + + /* + * Check if dealing with Maximum Packet Size(MPS) IN transfer at EP0 + * When sent data is a multiple MPS size (e.g. 64B ,128B ,192B + * ,256B ... ), after last MPS sized packet send IN ZLP packet to + * inform the host that no more data is available. + * The state of req.zero member is checked to be sure that the value to + * send is smaller than wValue expected from host. + * Check req.length to NOT send another ZLP when the current one is + * under completion (the one for which this completion has been called). + */ + if (hs_req->req.length && hs_ep->index == 0 && hs_req->req.zero && + hs_req->req.length == hs_req->req.actual && + !(hs_req->req.length % hs_ep->ep.maxpacket)) { + + dev_dbg(hsotg->dev, "ep0 zlp IN packet sent\n"); + s3c_hsotg_send_zlp(hsotg, hs_req); - /* if we did all of the transfer, and there is more data left - * around, then try restarting the rest of the request */ + return; + } if (!size_left && hs_req->req.actual < hs_req->req.length) { dev_dbg(hsotg->dev, "%s trying more for req...\n", __func__); @@ -1821,14 +1925,14 @@ static void s3c_hsotg_complete_in(struct s3c_hsotg *hsotg, * @dir_in: Set if this is an IN endpoint * * Process and clear any interrupt pending for an individual endpoint -*/ + */ static void s3c_hsotg_epint(struct s3c_hsotg *hsotg, unsigned int idx, int dir_in) { struct s3c_hsotg_ep *hs_ep = &hsotg->eps[idx]; - u32 epint_reg = dir_in ? S3C_DIEPINT(idx) : S3C_DOEPINT(idx); - u32 epctl_reg = dir_in ? S3C_DIEPCTL(idx) : S3C_DOEPCTL(idx); - u32 epsiz_reg = dir_in ? S3C_DIEPTSIZ(idx) : S3C_DOEPTSIZ(idx); + u32 epint_reg = dir_in ? DIEPINT(idx) : DOEPINT(idx); + u32 epctl_reg = dir_in ? DIEPCTL(idx) : DOEPCTL(idx); + u32 epsiz_reg = dir_in ? DIEPTSIZ(idx) : DOEPTSIZ(idx); u32 ints; ints = readl(hsotg->regs + epint_reg); @@ -1839,28 +1943,32 @@ static void s3c_hsotg_epint(struct s3c_hsotg *hsotg, unsigned int idx, dev_dbg(hsotg->dev, "%s: ep%d(%s) DxEPINT=0x%08x\n", __func__, idx, dir_in ? "in" : "out", ints); - if (ints & S3C_DxEPINT_XferCompl) { + if (ints & DxEPINT_XferCompl) { dev_dbg(hsotg->dev, "%s: XferCompl: DxEPCTL=0x%08x, DxEPTSIZ=%08x\n", __func__, readl(hsotg->regs + epctl_reg), readl(hsotg->regs + epsiz_reg)); - /* we get OutDone from the FIFO, so we only need to look - * at completing IN requests here */ + /* + * we get OutDone from the FIFO, so we only need to look + * at completing IN requests here + */ if (dir_in) { s3c_hsotg_complete_in(hsotg, hs_ep); if (idx == 0 && !hs_ep->req) s3c_hsotg_enqueue_setup(hsotg); } else if (using_dma(hsotg)) { - /* We're using DMA, we need to fire an OutDone here - * as we ignore the RXFIFO. */ + /* + * We're using DMA, we need to fire an OutDone here + * as we ignore the RXFIFO. + */ s3c_hsotg_handle_outdone(hsotg, idx, false); } } - if (ints & S3C_DxEPINT_EPDisbld) { + if (ints & DxEPINT_EPDisbld) { dev_dbg(hsotg->dev, "%s: EPDisbld\n", __func__); if (dir_in) { @@ -1868,27 +1976,29 @@ static void s3c_hsotg_epint(struct s3c_hsotg *hsotg, unsigned int idx, s3c_hsotg_txfifo_flush(hsotg, idx); - if ((epctl & S3C_DxEPCTL_Stall) && - (epctl & S3C_DxEPCTL_EPType_Bulk)) { - int dctl = readl(hsotg->regs + S3C_DCTL); + if ((epctl & DxEPCTL_Stall) && + (epctl & DxEPCTL_EPType_Bulk)) { + int dctl = readl(hsotg->regs + DCTL); - dctl |= S3C_DCTL_CGNPInNAK; - writel(dctl, hsotg->regs + S3C_DCTL); + dctl |= DCTL_CGNPInNAK; + writel(dctl, hsotg->regs + DCTL); } } } - if (ints & S3C_DxEPINT_AHBErr) + if (ints & DxEPINT_AHBErr) dev_dbg(hsotg->dev, "%s: AHBErr\n", __func__); - if (ints & S3C_DxEPINT_Setup) { /* Setup or Timeout */ + if (ints & DxEPINT_Setup) { /* Setup or Timeout */ dev_dbg(hsotg->dev, "%s: Setup/Timeout\n", __func__); if (using_dma(hsotg) && idx == 0) { - /* this is the notification we've received a + /* + * this is the notification we've received a * setup packet. In non-DMA mode we'd get this * from the RXFIFO, instead we need to process - * the setup here. */ + * the setup here. + */ if (dir_in) WARN_ON_ONCE(1); @@ -1897,29 +2007,29 @@ static void s3c_hsotg_epint(struct s3c_hsotg *hsotg, unsigned int idx, } } - if (ints & S3C_DxEPINT_Back2BackSetup) + if (ints & DxEPINT_Back2BackSetup) dev_dbg(hsotg->dev, "%s: B2BSetup/INEPNakEff\n", __func__); if (dir_in) { - /* not sure if this is important, but we'll clear it anyway - */ - if (ints & S3C_DIEPMSK_INTknTXFEmpMsk) { + /* not sure if this is important, but we'll clear it anyway */ + if (ints & DIEPMSK_INTknTXFEmpMsk) { dev_dbg(hsotg->dev, "%s: ep%d: INTknTXFEmpMsk\n", __func__, idx); } /* this probably means something bad is happening */ - if (ints & S3C_DIEPMSK_INTknEPMisMsk) { + if (ints & DIEPMSK_INTknEPMisMsk) { dev_warn(hsotg->dev, "%s: ep%d: INTknEP\n", __func__, idx); } /* FIFO has space or is empty (see GAHBCFG) */ if (hsotg->dedicated_fifos && - ints & S3C_DIEPMSK_TxFIFOEmpty) { + ints & DIEPMSK_TxFIFOEmpty) { dev_dbg(hsotg->dev, "%s: ep%d: TxFIFOEmpty\n", __func__, idx); - s3c_hsotg_trytx(hsotg, hs_ep); + if (!using_dma(hsotg)) + s3c_hsotg_trytx(hsotg, hs_ep); } } } @@ -1930,40 +2040,45 @@ static void s3c_hsotg_epint(struct s3c_hsotg *hsotg, unsigned int idx, * * Handle updating the device settings after the enumeration phase has * been completed. -*/ + */ static void s3c_hsotg_irq_enumdone(struct s3c_hsotg *hsotg) { - u32 dsts = readl(hsotg->regs + S3C_DSTS); + u32 dsts = readl(hsotg->regs + DSTS); int ep0_mps = 0, ep_mps; - /* This should signal the finish of the enumeration phase + /* + * This should signal the finish of the enumeration phase * of the USB handshaking, so we should now know what rate - * we connected at. */ + * we connected at. + */ dev_dbg(hsotg->dev, "EnumDone (DSTS=0x%08x)\n", dsts); - /* note, since we're limited by the size of transfer on EP0, and + /* + * note, since we're limited by the size of transfer on EP0, and * it seems IN transfers must be a even number of packets we do - * not advertise a 64byte MPS on EP0. */ + * not advertise a 64byte MPS on EP0. + */ /* catch both EnumSpd_FS and EnumSpd_FS48 */ - switch (dsts & S3C_DSTS_EnumSpd_MASK) { - case S3C_DSTS_EnumSpd_FS: - case S3C_DSTS_EnumSpd_FS48: + switch (dsts & DSTS_EnumSpd_MASK) { + case DSTS_EnumSpd_FS: + case DSTS_EnumSpd_FS48: hsotg->gadget.speed = USB_SPEED_FULL; ep0_mps = EP0_MPS_LIMIT; ep_mps = 64; break; - case S3C_DSTS_EnumSpd_HS: + case DSTS_EnumSpd_HS: hsotg->gadget.speed = USB_SPEED_HIGH; ep0_mps = EP0_MPS_LIMIT; ep_mps = 512; break; - case S3C_DSTS_EnumSpd_LS: + case DSTS_EnumSpd_LS: hsotg->gadget.speed = USB_SPEED_LOW; - /* note, we don't actually support LS in this driver at the + /* + * note, we don't actually support LS in this driver at the * moment, and the documentation seems to imply that it isn't * supported by the PHYs on some of the devices. */ @@ -1972,13 +2087,15 @@ static void s3c_hsotg_irq_enumdone(struct s3c_hsotg *hsotg) dev_info(hsotg->dev, "new device is %s\n", usb_speed_string(hsotg->gadget.speed)); - /* we should now know the maximum packet size for an - * endpoint, so set the endpoints to a default value. */ + /* + * we should now know the maximum packet size for an + * endpoint, so set the endpoints to a default value. + */ if (ep0_mps) { int i; s3c_hsotg_set_ep_maxpacket(hsotg, 0, ep0_mps); - for (i = 1; i < S3C_HSOTG_EPS; i++) + for (i = 1; i < hsotg->num_of_eps; i++) s3c_hsotg_set_ep_maxpacket(hsotg, i, ep_mps); } @@ -1987,8 +2104,8 @@ static void s3c_hsotg_irq_enumdone(struct s3c_hsotg *hsotg) s3c_hsotg_enqueue_setup(hsotg); dev_dbg(hsotg->dev, "EP0: DIEPCTL0=0x%08x, DOEPCTL0=0x%08x\n", - readl(hsotg->regs + S3C_DIEPCTL0), - readl(hsotg->regs + S3C_DOEPCTL0)); + readl(hsotg->regs + DIEPCTL0), + readl(hsotg->regs + DOEPCTL0)); } /** @@ -2011,8 +2128,10 @@ static void kill_all_requests(struct s3c_hsotg *hsotg, spin_lock_irqsave(&ep->lock, flags); list_for_each_entry_safe(req, treq, &ep->queue, queue) { - /* currently, we can't do much about an already - * running request on an in endpoint */ + /* + * currently, we can't do much about an already + * running request on an in endpoint + */ if (ep->req == req && ep->dir_in && !force) continue; @@ -2030,18 +2149,18 @@ static void kill_all_requests(struct s3c_hsotg *hsotg, (_hs)->driver->_entry(&(_hs)->gadget); /** - * s3c_hsotg_disconnect_irq - disconnect irq service + * s3c_hsotg_disconnect - disconnect service * @hsotg: The device state. * - * A disconnect IRQ has been received, meaning that the host has - * lost contact with the bus. Remove all current transactions - * and signal the gadget driver that this has happened. -*/ -static void s3c_hsotg_disconnect_irq(struct s3c_hsotg *hsotg) + * The device has been disconnected. Remove all current + * transactions and signal the gadget driver that this + * has happened. + */ +static void s3c_hsotg_disconnect(struct s3c_hsotg *hsotg) { unsigned ep; - for (ep = 0; ep < S3C_HSOTG_EPS; ep++) + for (ep = 0; ep < hsotg->num_of_eps; ep++) kill_all_requests(hsotg, &hsotg->eps[ep], -ESHUTDOWN, true); call_gadget(hsotg, disconnect); @@ -2059,7 +2178,7 @@ static void s3c_hsotg_irq_fifoempty(struct s3c_hsotg *hsotg, bool periodic) /* look through for any more data to transmit */ - for (epno = 0; epno < S3C_HSOTG_EPS; epno++) { + for (epno = 0; epno < hsotg->num_of_eps; epno++) { ep = &hsotg->eps[epno]; if (!ep->dir_in) @@ -2075,12 +2194,187 @@ static void s3c_hsotg_irq_fifoempty(struct s3c_hsotg *hsotg, bool periodic) } } -static struct s3c_hsotg *our_hsotg; - /* IRQ flags which will trigger a retry around the IRQ loop */ -#define IRQ_RETRY_MASK (S3C_GINTSTS_NPTxFEmp | \ - S3C_GINTSTS_PTxFEmp | \ - S3C_GINTSTS_RxFLvl) +#define IRQ_RETRY_MASK (GINTSTS_NPTxFEmp | \ + GINTSTS_PTxFEmp | \ + GINTSTS_RxFLvl) + +/** + * s3c_hsotg_corereset - issue softreset to the core + * @hsotg: The device state + * + * Issue a soft reset to the core, and await the core finishing it. + */ +static int s3c_hsotg_corereset(struct s3c_hsotg *hsotg) +{ + int timeout; + u32 grstctl; + + dev_dbg(hsotg->dev, "resetting core\n"); + + /* issue soft reset */ + writel(GRSTCTL_CSftRst, hsotg->regs + GRSTCTL); + + timeout = 1000; + do { + grstctl = readl(hsotg->regs + GRSTCTL); + } while ((grstctl & GRSTCTL_CSftRst) && timeout-- > 0); + + if (grstctl & GRSTCTL_CSftRst) { + dev_err(hsotg->dev, "Failed to get CSftRst asserted\n"); + return -EINVAL; + } + + timeout = 1000; + + while (1) { + u32 grstctl = readl(hsotg->regs + GRSTCTL); + + if (timeout-- < 0) { + dev_info(hsotg->dev, + "%s: reset failed, GRSTCTL=%08x\n", + __func__, grstctl); + return -ETIMEDOUT; + } + + if (!(grstctl & GRSTCTL_AHBIdle)) + continue; + + break; /* reset done */ + } + + dev_dbg(hsotg->dev, "reset successful\n"); + return 0; +} + +/** + * s3c_hsotg_core_init - issue softreset to the core + * @hsotg: The device state + * + * Issue a soft reset to the core, and await the core finishing it. + */ +static void s3c_hsotg_core_init(struct s3c_hsotg *hsotg) +{ + s3c_hsotg_corereset(hsotg); + + /* + * we must now enable ep0 ready for host detection and then + * set configuration. + */ + + /* set the PLL on, remove the HNP/SRP and set the PHY */ + writel(GUSBCFG_PHYIf16 | GUSBCFG_TOutCal(7) | + (0x5 << 10), hsotg->regs + GUSBCFG); + + s3c_hsotg_init_fifo(hsotg); + + __orr32(hsotg->regs + DCTL, DCTL_SftDiscon); + + writel(1 << 18 | DCFG_DevSpd_HS, hsotg->regs + DCFG); + + /* Clear any pending OTG interrupts */ + writel(0xffffffff, hsotg->regs + GOTGINT); + + /* Clear any pending interrupts */ + writel(0xffffffff, hsotg->regs + GINTSTS); + + writel(GINTSTS_ErlySusp | GINTSTS_SessReqInt | + GINTSTS_GOUTNakEff | GINTSTS_GINNakEff | + GINTSTS_ConIDStsChng | GINTSTS_USBRst | + GINTSTS_EnumDone | GINTSTS_OTGInt | + GINTSTS_USBSusp | GINTSTS_WkUpInt, + hsotg->regs + GINTMSK); + + if (using_dma(hsotg)) + writel(GAHBCFG_GlblIntrEn | GAHBCFG_DMAEn | + GAHBCFG_HBstLen_Incr4, + hsotg->regs + GAHBCFG); + else + writel(GAHBCFG_GlblIntrEn, hsotg->regs + GAHBCFG); + + /* + * Enabling INTknTXFEmpMsk here seems to be a big mistake, we end + * up being flooded with interrupts if the host is polling the + * endpoint to try and read data. + */ + + writel(((hsotg->dedicated_fifos) ? DIEPMSK_TxFIFOEmpty : 0) | + DIEPMSK_EPDisbldMsk | DIEPMSK_XferComplMsk | + DIEPMSK_TimeOUTMsk | DIEPMSK_AHBErrMsk | + DIEPMSK_INTknEPMisMsk, + hsotg->regs + DIEPMSK); + + /* + * don't need XferCompl, we get that from RXFIFO in slave mode. In + * DMA mode we may need this. + */ + writel((using_dma(hsotg) ? (DIEPMSK_XferComplMsk | + DIEPMSK_TimeOUTMsk) : 0) | + DOEPMSK_EPDisbldMsk | DOEPMSK_AHBErrMsk | + DOEPMSK_SetupMsk, + hsotg->regs + DOEPMSK); + + writel(0, hsotg->regs + DAINTMSK); + + dev_dbg(hsotg->dev, "EP0: DIEPCTL0=0x%08x, DOEPCTL0=0x%08x\n", + readl(hsotg->regs + DIEPCTL0), + readl(hsotg->regs + DOEPCTL0)); + + /* enable in and out endpoint interrupts */ + s3c_hsotg_en_gsint(hsotg, GINTSTS_OEPInt | GINTSTS_IEPInt); + + /* + * Enable the RXFIFO when in slave mode, as this is how we collect + * the data. In DMA mode, we get events from the FIFO but also + * things we cannot process, so do not use it. + */ + if (!using_dma(hsotg)) + s3c_hsotg_en_gsint(hsotg, GINTSTS_RxFLvl); + + /* Enable interrupts for EP0 in and out */ + s3c_hsotg_ctrl_epint(hsotg, 0, 0, 1); + s3c_hsotg_ctrl_epint(hsotg, 0, 1, 1); + + __orr32(hsotg->regs + DCTL, DCTL_PWROnPrgDone); + udelay(10); /* see openiboot */ + __bic32(hsotg->regs + DCTL, DCTL_PWROnPrgDone); + + dev_dbg(hsotg->dev, "DCTL=0x%08x\n", readl(hsotg->regs + DCTL)); + + /* + * DxEPCTL_USBActEp says RO in manual, but seems to be set by + * writing to the EPCTL register.. + */ + + /* set to read 1 8byte packet */ + writel(DxEPTSIZ_MC(1) | DxEPTSIZ_PktCnt(1) | + DxEPTSIZ_XferSize(8), hsotg->regs + DOEPTSIZ0); + + writel(s3c_hsotg_ep0_mps(hsotg->eps[0].ep.maxpacket) | + DxEPCTL_CNAK | DxEPCTL_EPEna | + DxEPCTL_USBActEp, + hsotg->regs + DOEPCTL0); + + /* enable, but don't activate EP0in */ + writel(s3c_hsotg_ep0_mps(hsotg->eps[0].ep.maxpacket) | + DxEPCTL_USBActEp, hsotg->regs + DIEPCTL0); + + s3c_hsotg_enqueue_setup(hsotg); + + dev_dbg(hsotg->dev, "EP0: DIEPCTL0=0x%08x, DOEPCTL0=0x%08x\n", + readl(hsotg->regs + DIEPCTL0), + readl(hsotg->regs + DOEPCTL0)); + + /* clear global NAKs */ + writel(DCTL_CGOUTNak | DCTL_CGNPInNAK, + hsotg->regs + DCTL); + + /* must be at-least 3ms to allow bus to see disconnect */ + mdelay(3); + + /* remove the soft-disconnect and let's go */ + __bic32(hsotg->regs + DCTL, DCTL_SftDiscon); +} /** * s3c_hsotg_irq - handle device interrupt @@ -2095,52 +2389,45 @@ static irqreturn_t s3c_hsotg_irq(int irq, void *pw) u32 gintmsk; irq_retry: - gintsts = readl(hsotg->regs + S3C_GINTSTS); - gintmsk = readl(hsotg->regs + S3C_GINTMSK); + gintsts = readl(hsotg->regs + GINTSTS); + gintmsk = readl(hsotg->regs + GINTMSK); dev_dbg(hsotg->dev, "%s: %08x %08x (%08x) retry %d\n", __func__, gintsts, gintsts & gintmsk, gintmsk, retry_count); gintsts &= gintmsk; - if (gintsts & S3C_GINTSTS_OTGInt) { - u32 otgint = readl(hsotg->regs + S3C_GOTGINT); + if (gintsts & GINTSTS_OTGInt) { + u32 otgint = readl(hsotg->regs + GOTGINT); dev_info(hsotg->dev, "OTGInt: %08x\n", otgint); - writel(otgint, hsotg->regs + S3C_GOTGINT); + writel(otgint, hsotg->regs + GOTGINT); } - if (gintsts & S3C_GINTSTS_DisconnInt) { - dev_dbg(hsotg->dev, "%s: DisconnInt\n", __func__); - writel(S3C_GINTSTS_DisconnInt, hsotg->regs + S3C_GINTSTS); - - s3c_hsotg_disconnect_irq(hsotg); - } - - if (gintsts & S3C_GINTSTS_SessReqInt) { + if (gintsts & GINTSTS_SessReqInt) { dev_dbg(hsotg->dev, "%s: SessReqInt\n", __func__); - writel(S3C_GINTSTS_SessReqInt, hsotg->regs + S3C_GINTSTS); + writel(GINTSTS_SessReqInt, hsotg->regs + GINTSTS); } - if (gintsts & S3C_GINTSTS_EnumDone) { - writel(S3C_GINTSTS_EnumDone, hsotg->regs + S3C_GINTSTS); + if (gintsts & GINTSTS_EnumDone) { + writel(GINTSTS_EnumDone, hsotg->regs + GINTSTS); s3c_hsotg_irq_enumdone(hsotg); } - if (gintsts & S3C_GINTSTS_ConIDStsChng) { + if (gintsts & GINTSTS_ConIDStsChng) { dev_dbg(hsotg->dev, "ConIDStsChg (DSTS=0x%08x, GOTCTL=%08x)\n", - readl(hsotg->regs + S3C_DSTS), - readl(hsotg->regs + S3C_GOTGCTL)); + readl(hsotg->regs + DSTS), + readl(hsotg->regs + GOTGCTL)); - writel(S3C_GINTSTS_ConIDStsChng, hsotg->regs + S3C_GINTSTS); + writel(GINTSTS_ConIDStsChng, hsotg->regs + GINTSTS); } - if (gintsts & (S3C_GINTSTS_OEPInt | S3C_GINTSTS_IEPInt)) { - u32 daint = readl(hsotg->regs + S3C_DAINT); - u32 daint_out = daint >> S3C_DAINT_OutEP_SHIFT; - u32 daint_in = daint & ~(daint_out << S3C_DAINT_OutEP_SHIFT); + if (gintsts & (GINTSTS_OEPInt | GINTSTS_IEPInt)) { + u32 daint = readl(hsotg->regs + DAINT); + u32 daint_out = daint >> DAINT_OutEP_SHIFT; + u32 daint_in = daint & ~(daint_out << DAINT_OutEP_SHIFT); int ep; dev_dbg(hsotg->dev, "%s: daint=%08x\n", __func__, daint); @@ -2156,102 +2443,116 @@ irq_retry: } } - if (gintsts & S3C_GINTSTS_USBRst) { + if (gintsts & GINTSTS_USBRst) { + + u32 usb_status = readl(hsotg->regs + GOTGCTL); + dev_info(hsotg->dev, "%s: USBRst\n", __func__); dev_dbg(hsotg->dev, "GNPTXSTS=%08x\n", - readl(hsotg->regs + S3C_GNPTXSTS)); - - writel(S3C_GINTSTS_USBRst, hsotg->regs + S3C_GINTSTS); + readl(hsotg->regs + GNPTXSTS)); - kill_all_requests(hsotg, &hsotg->eps[0], -ECONNRESET, true); + writel(GINTSTS_USBRst, hsotg->regs + GINTSTS); - /* it seems after a reset we can end up with a situation - * where the TXFIFO still has data in it... the docs - * suggest resetting all the fifos, so use the init_fifo - * code to relayout and flush the fifos. - */ + if (usb_status & GOTGCTL_BSESVLD) { + if (time_after(jiffies, hsotg->last_rst + + msecs_to_jiffies(200))) { - s3c_hsotg_init_fifo(hsotg); + kill_all_requests(hsotg, &hsotg->eps[0], + -ECONNRESET, true); - s3c_hsotg_enqueue_setup(hsotg); + s3c_hsotg_core_init(hsotg); + hsotg->last_rst = jiffies; + } + } } /* check both FIFOs */ - if (gintsts & S3C_GINTSTS_NPTxFEmp) { + if (gintsts & GINTSTS_NPTxFEmp) { dev_dbg(hsotg->dev, "NPTxFEmp\n"); - /* Disable the interrupt to stop it happening again + /* + * Disable the interrupt to stop it happening again * unless one of these endpoint routines decides that - * it needs re-enabling */ + * it needs re-enabling + */ - s3c_hsotg_disable_gsint(hsotg, S3C_GINTSTS_NPTxFEmp); + s3c_hsotg_disable_gsint(hsotg, GINTSTS_NPTxFEmp); s3c_hsotg_irq_fifoempty(hsotg, false); } - if (gintsts & S3C_GINTSTS_PTxFEmp) { + if (gintsts & GINTSTS_PTxFEmp) { dev_dbg(hsotg->dev, "PTxFEmp\n"); - /* See note in S3C_GINTSTS_NPTxFEmp */ + /* See note in GINTSTS_NPTxFEmp */ - s3c_hsotg_disable_gsint(hsotg, S3C_GINTSTS_PTxFEmp); + s3c_hsotg_disable_gsint(hsotg, GINTSTS_PTxFEmp); s3c_hsotg_irq_fifoempty(hsotg, true); } - if (gintsts & S3C_GINTSTS_RxFLvl) { - /* note, since GINTSTS_RxFLvl doubles as FIFO-not-empty, + if (gintsts & GINTSTS_RxFLvl) { + /* + * note, since GINTSTS_RxFLvl doubles as FIFO-not-empty, * we need to retry s3c_hsotg_handle_rx if this is still - * set. */ + * set. + */ s3c_hsotg_handle_rx(hsotg); } - if (gintsts & S3C_GINTSTS_ModeMis) { + if (gintsts & GINTSTS_ModeMis) { dev_warn(hsotg->dev, "warning, mode mismatch triggered\n"); - writel(S3C_GINTSTS_ModeMis, hsotg->regs + S3C_GINTSTS); + writel(GINTSTS_ModeMis, hsotg->regs + GINTSTS); } - if (gintsts & S3C_GINTSTS_USBSusp) { - dev_info(hsotg->dev, "S3C_GINTSTS_USBSusp\n"); - writel(S3C_GINTSTS_USBSusp, hsotg->regs + S3C_GINTSTS); + if (gintsts & GINTSTS_USBSusp) { + dev_info(hsotg->dev, "GINTSTS_USBSusp\n"); + writel(GINTSTS_USBSusp, hsotg->regs + GINTSTS); call_gadget(hsotg, suspend); + s3c_hsotg_disconnect(hsotg); } - if (gintsts & S3C_GINTSTS_WkUpInt) { - dev_info(hsotg->dev, "S3C_GINTSTS_WkUpIn\n"); - writel(S3C_GINTSTS_WkUpInt, hsotg->regs + S3C_GINTSTS); + if (gintsts & GINTSTS_WkUpInt) { + dev_info(hsotg->dev, "GINTSTS_WkUpIn\n"); + writel(GINTSTS_WkUpInt, hsotg->regs + GINTSTS); call_gadget(hsotg, resume); } - if (gintsts & S3C_GINTSTS_ErlySusp) { - dev_dbg(hsotg->dev, "S3C_GINTSTS_ErlySusp\n"); - writel(S3C_GINTSTS_ErlySusp, hsotg->regs + S3C_GINTSTS); + if (gintsts & GINTSTS_ErlySusp) { + dev_dbg(hsotg->dev, "GINTSTS_ErlySusp\n"); + writel(GINTSTS_ErlySusp, hsotg->regs + GINTSTS); + + s3c_hsotg_disconnect(hsotg); } - /* these next two seem to crop-up occasionally causing the core + /* + * these next two seem to crop-up occasionally causing the core * to shutdown the USB transfer, so try clearing them and logging - * the occurrence. */ + * the occurrence. + */ - if (gintsts & S3C_GINTSTS_GOUTNakEff) { + if (gintsts & GINTSTS_GOUTNakEff) { dev_info(hsotg->dev, "GOUTNakEff triggered\n"); - writel(S3C_DCTL_CGOUTNak, hsotg->regs + S3C_DCTL); + writel(DCTL_CGOUTNak, hsotg->regs + DCTL); s3c_hsotg_dump(hsotg); } - if (gintsts & S3C_GINTSTS_GINNakEff) { + if (gintsts & GINTSTS_GINNakEff) { dev_info(hsotg->dev, "GINNakEff triggered\n"); - writel(S3C_DCTL_CGNPInNAK, hsotg->regs + S3C_DCTL); + writel(DCTL_CGNPInNAK, hsotg->regs + DCTL); s3c_hsotg_dump(hsotg); } - /* if we've had fifo events, we should try and go around the - * loop again to see if there's any point in returning yet. */ + /* + * if we've had fifo events, we should try and go around the + * loop again to see if there's any point in returning yet. + */ if (gintsts & IRQ_RETRY_MASK && --retry_count > 0) goto irq_retry; @@ -2265,7 +2566,7 @@ irq_retry: * @desc: The USB endpoint descriptor to configure with. * * This is called from the USB gadget code's usb_ep_enable(). -*/ + */ static int s3c_hsotg_ep_enable(struct usb_ep *ep, const struct usb_endpoint_descriptor *desc) { @@ -2297,7 +2598,7 @@ static int s3c_hsotg_ep_enable(struct usb_ep *ep, /* note, we handle this here instead of s3c_hsotg_set_ep_maxpacket */ - epctrl_reg = dir_in ? S3C_DIEPCTL(index) : S3C_DOEPCTL(index); + epctrl_reg = dir_in ? DIEPCTL(index) : DOEPCTL(index); epctrl = readl(hsotg->regs + epctrl_reg); dev_dbg(hsotg->dev, "%s: read DxEPCTL=0x%08x from 0x%08x\n", @@ -2305,20 +2606,23 @@ static int s3c_hsotg_ep_enable(struct usb_ep *ep, spin_lock_irqsave(&hs_ep->lock, flags); - epctrl &= ~(S3C_DxEPCTL_EPType_MASK | S3C_DxEPCTL_MPS_MASK); - epctrl |= S3C_DxEPCTL_MPS(mps); + epctrl &= ~(DxEPCTL_EPType_MASK | DxEPCTL_MPS_MASK); + epctrl |= DxEPCTL_MPS(mps); - /* mark the endpoint as active, otherwise the core may ignore - * transactions entirely for this endpoint */ - epctrl |= S3C_DxEPCTL_USBActEp; + /* + * mark the endpoint as active, otherwise the core may ignore + * transactions entirely for this endpoint + */ + epctrl |= DxEPCTL_USBActEp; - /* set the NAK status on the endpoint, otherwise we might try and + /* + * set the NAK status on the endpoint, otherwise we might try and * do something with data that we've yet got a request to process * since the RXFIFO will take data for an endpoint even if the * size register hasn't been set. */ - epctrl |= S3C_DxEPCTL_SNAK; + epctrl |= DxEPCTL_SNAK; /* update the endpoint state */ hs_ep->ep.maxpacket = mps; @@ -2333,37 +2637,40 @@ static int s3c_hsotg_ep_enable(struct usb_ep *ep, goto out; case USB_ENDPOINT_XFER_BULK: - epctrl |= S3C_DxEPCTL_EPType_Bulk; + epctrl |= DxEPCTL_EPType_Bulk; break; case USB_ENDPOINT_XFER_INT: if (dir_in) { - /* Allocate our TxFNum by simply using the index + /* + * Allocate our TxFNum by simply using the index * of the endpoint for the moment. We could do * something better if the host indicates how - * many FIFOs we are expecting to use. */ + * many FIFOs we are expecting to use. + */ hs_ep->periodic = 1; - epctrl |= S3C_DxEPCTL_TxFNum(index); + epctrl |= DxEPCTL_TxFNum(index); } - epctrl |= S3C_DxEPCTL_EPType_Intterupt; + epctrl |= DxEPCTL_EPType_Intterupt; break; case USB_ENDPOINT_XFER_CONTROL: - epctrl |= S3C_DxEPCTL_EPType_Control; + epctrl |= DxEPCTL_EPType_Control; break; } - /* if the hardware has dedicated fifos, we must give each IN EP + /* + * if the hardware has dedicated fifos, we must give each IN EP * a unique tx-fifo even if it is non-periodic. */ if (dir_in && hsotg->dedicated_fifos) - epctrl |= S3C_DxEPCTL_TxFNum(index); + epctrl |= DxEPCTL_TxFNum(index); /* for non control endpoints, set PID to D0 */ if (index) - epctrl |= S3C_DxEPCTL_SetD0PID; + epctrl |= DxEPCTL_SetD0PID; dev_dbg(hsotg->dev, "%s: write DxEPCTL=0x%08x\n", __func__, epctrl); @@ -2380,6 +2687,10 @@ out: return ret; } +/** + * s3c_hsotg_ep_disable - disable given endpoint + * @ep: The endpoint to disable. + */ static int s3c_hsotg_ep_disable(struct usb_ep *ep) { struct s3c_hsotg_ep *hs_ep = our_ep(ep); @@ -2397,7 +2708,7 @@ static int s3c_hsotg_ep_disable(struct usb_ep *ep) return -EINVAL; } - epctrl_reg = dir_in ? S3C_DIEPCTL(index) : S3C_DOEPCTL(index); + epctrl_reg = dir_in ? DIEPCTL(index) : DOEPCTL(index); /* terminate all requests with shutdown */ kill_all_requests(hsotg, hs_ep, -ESHUTDOWN, false); @@ -2405,9 +2716,9 @@ static int s3c_hsotg_ep_disable(struct usb_ep *ep) spin_lock_irqsave(&hs_ep->lock, flags); ctrl = readl(hsotg->regs + epctrl_reg); - ctrl &= ~S3C_DxEPCTL_EPEna; - ctrl &= ~S3C_DxEPCTL_USBActEp; - ctrl |= S3C_DxEPCTL_SNAK; + ctrl &= ~DxEPCTL_EPEna; + ctrl &= ~DxEPCTL_USBActEp; + ctrl |= DxEPCTL_SNAK; dev_dbg(hsotg->dev, "%s: DxEPCTL=0x%08x\n", __func__, ctrl); writel(ctrl, hsotg->regs + epctrl_reg); @@ -2423,7 +2734,7 @@ static int s3c_hsotg_ep_disable(struct usb_ep *ep) * on_list - check request is on the given endpoint * @ep: The endpoint to check. * @test: The request to test if it is on the endpoint. -*/ + */ static bool on_list(struct s3c_hsotg_ep *ep, struct s3c_hsotg_req *test) { struct s3c_hsotg_req *req, *treq; @@ -2436,6 +2747,11 @@ static bool on_list(struct s3c_hsotg_ep *ep, struct s3c_hsotg_req *test) return false; } +/** + * s3c_hsotg_ep_dequeue - dequeue given endpoint + * @ep: The endpoint to dequeue. + * @req: The request to be removed from a queue. + */ static int s3c_hsotg_ep_dequeue(struct usb_ep *ep, struct usb_request *req) { struct s3c_hsotg_req *hs_req = our_req(req); @@ -2458,6 +2774,11 @@ static int s3c_hsotg_ep_dequeue(struct usb_ep *ep, struct usb_request *req) return 0; } +/** + * s3c_hsotg_ep_sethalt - set halt on a given endpoint + * @ep: The endpoint to set halt. + * @value: Set or unset the halt. + */ static int s3c_hsotg_ep_sethalt(struct usb_ep *ep, int value) { struct s3c_hsotg_ep *hs_ep = our_ep(ep); @@ -2474,34 +2795,34 @@ static int s3c_hsotg_ep_sethalt(struct usb_ep *ep, int value) /* write both IN and OUT control registers */ - epreg = S3C_DIEPCTL(index); + epreg = DIEPCTL(index); epctl = readl(hs->regs + epreg); if (value) { - epctl |= S3C_DxEPCTL_Stall + S3C_DxEPCTL_SNAK; - if (epctl & S3C_DxEPCTL_EPEna) - epctl |= S3C_DxEPCTL_EPDis; + epctl |= DxEPCTL_Stall + DxEPCTL_SNAK; + if (epctl & DxEPCTL_EPEna) + epctl |= DxEPCTL_EPDis; } else { - epctl &= ~S3C_DxEPCTL_Stall; - xfertype = epctl & S3C_DxEPCTL_EPType_MASK; - if (xfertype == S3C_DxEPCTL_EPType_Bulk || - xfertype == S3C_DxEPCTL_EPType_Intterupt) - epctl |= S3C_DxEPCTL_SetD0PID; + epctl &= ~DxEPCTL_Stall; + xfertype = epctl & DxEPCTL_EPType_MASK; + if (xfertype == DxEPCTL_EPType_Bulk || + xfertype == DxEPCTL_EPType_Intterupt) + epctl |= DxEPCTL_SetD0PID; } writel(epctl, hs->regs + epreg); - epreg = S3C_DOEPCTL(index); + epreg = DOEPCTL(index); epctl = readl(hs->regs + epreg); if (value) - epctl |= S3C_DxEPCTL_Stall; + epctl |= DxEPCTL_Stall; else { - epctl &= ~S3C_DxEPCTL_Stall; - xfertype = epctl & S3C_DxEPCTL_EPType_MASK; - if (xfertype == S3C_DxEPCTL_EPType_Bulk || - xfertype == S3C_DxEPCTL_EPType_Intterupt) - epctl |= S3C_DxEPCTL_SetD0PID; + epctl &= ~DxEPCTL_Stall; + xfertype = epctl & DxEPCTL_EPType_MASK; + if (xfertype == DxEPCTL_EPType_Bulk || + xfertype == DxEPCTL_EPType_Intterupt) + epctl |= DxEPCTL_SetD0PID; } writel(epctl, hs->regs + epreg); @@ -2523,57 +2844,91 @@ static struct usb_ep_ops s3c_hsotg_ep_ops = { }; /** - * s3c_hsotg_corereset - issue softreset to the core - * @hsotg: The device state + * s3c_hsotg_phy_enable - enable platform phy dev + * @hsotg: The driver state * - * Issue a soft reset to the core, and await the core finishing it. -*/ -static int s3c_hsotg_corereset(struct s3c_hsotg *hsotg) + * A wrapper for platform code responsible for controlling + * low-level USB code + */ +static void s3c_hsotg_phy_enable(struct s3c_hsotg *hsotg) { - int timeout; - u32 grstctl; + struct platform_device *pdev = to_platform_device(hsotg->dev); - dev_dbg(hsotg->dev, "resetting core\n"); + dev_dbg(hsotg->dev, "pdev 0x%p\n", pdev); + if (hsotg->plat->phy_init) + hsotg->plat->phy_init(pdev, hsotg->plat->phy_type); +} - /* issue soft reset */ - writel(S3C_GRSTCTL_CSftRst, hsotg->regs + S3C_GRSTCTL); +/** + * s3c_hsotg_phy_disable - disable platform phy dev + * @hsotg: The driver state + * + * A wrapper for platform code responsible for controlling + * low-level USB code + */ +static void s3c_hsotg_phy_disable(struct s3c_hsotg *hsotg) +{ + struct platform_device *pdev = to_platform_device(hsotg->dev); - timeout = 1000; - do { - grstctl = readl(hsotg->regs + S3C_GRSTCTL); - } while ((grstctl & S3C_GRSTCTL_CSftRst) && timeout-- > 0); + if (hsotg->plat->phy_exit) + hsotg->plat->phy_exit(pdev, hsotg->plat->phy_type); +} - if (grstctl & S3C_GRSTCTL_CSftRst) { - dev_err(hsotg->dev, "Failed to get CSftRst asserted\n"); - return -EINVAL; - } +/** + * s3c_hsotg_init - initalize the usb core + * @hsotg: The driver state + */ +static void s3c_hsotg_init(struct s3c_hsotg *hsotg) +{ + /* unmask subset of endpoint interrupts */ - timeout = 1000; + writel(DIEPMSK_TimeOUTMsk | DIEPMSK_AHBErrMsk | + DIEPMSK_EPDisbldMsk | DIEPMSK_XferComplMsk, + hsotg->regs + DIEPMSK); - while (1) { - u32 grstctl = readl(hsotg->regs + S3C_GRSTCTL); + writel(DOEPMSK_SetupMsk | DOEPMSK_AHBErrMsk | + DOEPMSK_EPDisbldMsk | DOEPMSK_XferComplMsk, + hsotg->regs + DOEPMSK); - if (timeout-- < 0) { - dev_info(hsotg->dev, - "%s: reset failed, GRSTCTL=%08x\n", - __func__, grstctl); - return -ETIMEDOUT; - } + writel(0, hsotg->regs + DAINTMSK); - if (!(grstctl & S3C_GRSTCTL_AHBIdle)) - continue; + /* Be in disconnected state until gadget is registered */ + __orr32(hsotg->regs + DCTL, DCTL_SftDiscon); - break; /* reset done */ + if (0) { + /* post global nak until we're ready */ + writel(DCTL_SGNPInNAK | DCTL_SGOUTNak, + hsotg->regs + DCTL); } - dev_dbg(hsotg->dev, "reset successful\n"); - return 0; + /* setup fifos */ + + dev_dbg(hsotg->dev, "GRXFSIZ=0x%08x, GNPTXFSIZ=0x%08x\n", + readl(hsotg->regs + GRXFSIZ), + readl(hsotg->regs + GNPTXFSIZ)); + + s3c_hsotg_init_fifo(hsotg); + + /* set the PLL on, remove the HNP/SRP and set the PHY */ + writel(GUSBCFG_PHYIf16 | GUSBCFG_TOutCal(7) | (0x5 << 10), + hsotg->regs + GUSBCFG); + + writel(using_dma(hsotg) ? GAHBCFG_DMAEn : 0x0, + hsotg->regs + GAHBCFG); } -static int s3c_hsotg_start(struct usb_gadget_driver *driver, - int (*bind)(struct usb_gadget *)) +/** + * s3c_hsotg_udc_start - prepare the udc for work + * @gadget: The usb gadget state + * @driver: The usb gadget driver + * + * Perform initialization to prepare udc device and driver + * to work. + */ +static int s3c_hsotg_udc_start(struct usb_gadget *gadget, + struct usb_gadget_driver *driver) { - struct s3c_hsotg *hsotg = our_hsotg; + struct s3c_hsotg *hsotg = to_hsotg(gadget); int ret; if (!hsotg) { @@ -2589,7 +2944,7 @@ static int s3c_hsotg_start(struct usb_gadget_driver *driver, if (driver->max_speed < USB_SPEED_FULL) dev_err(hsotg->dev, "%s: bad speed\n", __func__); - if (!bind || !driver->setup) { + if (!driver->setup) { dev_err(hsotg->dev, "%s: missing entry points\n", __func__); return -EINVAL; } @@ -2602,135 +2957,17 @@ static int s3c_hsotg_start(struct usb_gadget_driver *driver, hsotg->gadget.dev.dma_mask = hsotg->dev->dma_mask; hsotg->gadget.speed = USB_SPEED_UNKNOWN; - ret = device_add(&hsotg->gadget.dev); + ret = regulator_bulk_enable(ARRAY_SIZE(hsotg->supplies), + hsotg->supplies); if (ret) { - dev_err(hsotg->dev, "failed to register gadget device\n"); + dev_err(hsotg->dev, "failed to enable supplies: %d\n", ret); goto err; } - ret = bind(&hsotg->gadget); - if (ret) { - dev_err(hsotg->dev, "failed bind %s\n", driver->driver.name); - - hsotg->gadget.dev.driver = NULL; - hsotg->driver = NULL; - goto err; - } - - /* we must now enable ep0 ready for host detection and then - * set configuration. */ - - s3c_hsotg_corereset(hsotg); - - /* set the PLL on, remove the HNP/SRP and set the PHY */ - writel(S3C_GUSBCFG_PHYIf16 | S3C_GUSBCFG_TOutCal(7) | - (0x5 << 10), hsotg->regs + S3C_GUSBCFG); - - /* looks like soft-reset changes state of FIFOs */ - s3c_hsotg_init_fifo(hsotg); - - __orr32(hsotg->regs + S3C_DCTL, S3C_DCTL_SftDiscon); - - writel(1 << 18 | S3C_DCFG_DevSpd_HS, hsotg->regs + S3C_DCFG); - - /* Clear any pending OTG interrupts */ - writel(0xffffffff, hsotg->regs + S3C_GOTGINT); - - /* Clear any pending interrupts */ - writel(0xffffffff, hsotg->regs + S3C_GINTSTS); - - writel(S3C_GINTSTS_DisconnInt | S3C_GINTSTS_SessReqInt | - S3C_GINTSTS_ConIDStsChng | S3C_GINTSTS_USBRst | - S3C_GINTSTS_EnumDone | S3C_GINTSTS_OTGInt | - S3C_GINTSTS_USBSusp | S3C_GINTSTS_WkUpInt | - S3C_GINTSTS_GOUTNakEff | S3C_GINTSTS_GINNakEff | - S3C_GINTSTS_ErlySusp, - hsotg->regs + S3C_GINTMSK); - - if (using_dma(hsotg)) - writel(S3C_GAHBCFG_GlblIntrEn | S3C_GAHBCFG_DMAEn | - S3C_GAHBCFG_HBstLen_Incr4, - hsotg->regs + S3C_GAHBCFG); - else - writel(S3C_GAHBCFG_GlblIntrEn, hsotg->regs + S3C_GAHBCFG); - - /* Enabling INTknTXFEmpMsk here seems to be a big mistake, we end - * up being flooded with interrupts if the host is polling the - * endpoint to try and read data. */ - - writel(S3C_DIEPMSK_TimeOUTMsk | S3C_DIEPMSK_AHBErrMsk | - S3C_DIEPMSK_INTknEPMisMsk | - S3C_DIEPMSK_EPDisbldMsk | S3C_DIEPMSK_XferComplMsk | - ((hsotg->dedicated_fifos) ? S3C_DIEPMSK_TxFIFOEmpty : 0), - hsotg->regs + S3C_DIEPMSK); - - /* don't need XferCompl, we get that from RXFIFO in slave mode. In - * DMA mode we may need this. */ - writel(S3C_DOEPMSK_SetupMsk | S3C_DOEPMSK_AHBErrMsk | - S3C_DOEPMSK_EPDisbldMsk | - (using_dma(hsotg) ? (S3C_DIEPMSK_XferComplMsk | - S3C_DIEPMSK_TimeOUTMsk) : 0), - hsotg->regs + S3C_DOEPMSK); - - writel(0, hsotg->regs + S3C_DAINTMSK); - - dev_dbg(hsotg->dev, "EP0: DIEPCTL0=0x%08x, DOEPCTL0=0x%08x\n", - readl(hsotg->regs + S3C_DIEPCTL0), - readl(hsotg->regs + S3C_DOEPCTL0)); - - /* enable in and out endpoint interrupts */ - s3c_hsotg_en_gsint(hsotg, S3C_GINTSTS_OEPInt | S3C_GINTSTS_IEPInt); - - /* Enable the RXFIFO when in slave mode, as this is how we collect - * the data. In DMA mode, we get events from the FIFO but also - * things we cannot process, so do not use it. */ - if (!using_dma(hsotg)) - s3c_hsotg_en_gsint(hsotg, S3C_GINTSTS_RxFLvl); - - /* Enable interrupts for EP0 in and out */ - s3c_hsotg_ctrl_epint(hsotg, 0, 0, 1); - s3c_hsotg_ctrl_epint(hsotg, 0, 1, 1); - - __orr32(hsotg->regs + S3C_DCTL, S3C_DCTL_PWROnPrgDone); - udelay(10); /* see openiboot */ - __bic32(hsotg->regs + S3C_DCTL, S3C_DCTL_PWROnPrgDone); - - dev_dbg(hsotg->dev, "DCTL=0x%08x\n", readl(hsotg->regs + S3C_DCTL)); - - /* S3C_DxEPCTL_USBActEp says RO in manual, but seems to be set by - writing to the EPCTL register.. */ - - /* set to read 1 8byte packet */ - writel(S3C_DxEPTSIZ_MC(1) | S3C_DxEPTSIZ_PktCnt(1) | - S3C_DxEPTSIZ_XferSize(8), hsotg->regs + DOEPTSIZ0); - - writel(s3c_hsotg_ep0_mps(hsotg->eps[0].ep.maxpacket) | - S3C_DxEPCTL_CNAK | S3C_DxEPCTL_EPEna | - S3C_DxEPCTL_USBActEp, - hsotg->regs + S3C_DOEPCTL0); - - /* enable, but don't activate EP0in */ - writel(s3c_hsotg_ep0_mps(hsotg->eps[0].ep.maxpacket) | - S3C_DxEPCTL_USBActEp, hsotg->regs + S3C_DIEPCTL0); - - s3c_hsotg_enqueue_setup(hsotg); - - dev_dbg(hsotg->dev, "EP0: DIEPCTL0=0x%08x, DOEPCTL0=0x%08x\n", - readl(hsotg->regs + S3C_DIEPCTL0), - readl(hsotg->regs + S3C_DOEPCTL0)); - - /* clear global NAKs */ - writel(S3C_DCTL_CGOUTNak | S3C_DCTL_CGNPInNAK, - hsotg->regs + S3C_DCTL); - - /* must be at-least 3ms to allow bus to see disconnect */ - msleep(3); - - /* remove the soft-disconnect and let's go */ - __bic32(hsotg->regs + S3C_DCTL, S3C_DCTL_SftDiscon); - - /* report to the user, and return */ + s3c_hsotg_phy_enable(hsotg); + s3c_hsotg_core_init(hsotg); + hsotg->last_rst = jiffies; dev_info(hsotg->dev, "bound driver %s\n", driver->driver.name); return 0; @@ -2740,9 +2977,17 @@ err: return ret; } -static int s3c_hsotg_stop(struct usb_gadget_driver *driver) +/** + * s3c_hsotg_udc_stop - stop the udc + * @gadget: The usb gadget state + * @driver: The usb gadget driver + * + * Stop udc hw block and stay tunned for future transmissions + */ +static int s3c_hsotg_udc_stop(struct usb_gadget *gadget, + struct usb_gadget_driver *driver) { - struct s3c_hsotg *hsotg = our_hsotg; + struct s3c_hsotg *hsotg = to_hsotg(gadget); int ep; if (!hsotg) @@ -2752,16 +2997,15 @@ static int s3c_hsotg_stop(struct usb_gadget_driver *driver) return -EINVAL; /* all endpoints should be shutdown */ - for (ep = 0; ep < S3C_HSOTG_EPS; ep++) + for (ep = 0; ep < hsotg->num_of_eps; ep++) s3c_hsotg_ep_disable(&hsotg->eps[ep].ep); - call_gadget(hsotg, disconnect); + s3c_hsotg_phy_disable(hsotg); + regulator_bulk_disable(ARRAY_SIZE(hsotg->supplies), hsotg->supplies); - driver->unbind(&hsotg->gadget); hsotg->driver = NULL; hsotg->gadget.speed = USB_SPEED_UNKNOWN; - - device_del(&hsotg->gadget.dev); + hsotg->gadget.dev.driver = NULL; dev_info(hsotg->dev, "unregistered gadget driver '%s'\n", driver->driver.name); @@ -2769,6 +3013,12 @@ static int s3c_hsotg_stop(struct usb_gadget_driver *driver) return 0; } +/** + * s3c_hsotg_gadget_getframe - read the frame number + * @gadget: The usb gadget state + * + * Read the {micro} frame number + */ static int s3c_hsotg_gadget_getframe(struct usb_gadget *gadget) { return s3c_hsotg_read_frameno(to_hsotg(gadget)); @@ -2776,8 +3026,8 @@ static int s3c_hsotg_gadget_getframe(struct usb_gadget *gadget) static struct usb_gadget_ops s3c_hsotg_gadget_ops = { .get_frame = s3c_hsotg_gadget_getframe, - .start = s3c_hsotg_start, - .stop = s3c_hsotg_stop, + .udc_start = s3c_hsotg_udc_start, + .udc_stop = s3c_hsotg_udc_stop, }; /** @@ -2824,111 +3074,42 @@ static void __devinit s3c_hsotg_initep(struct s3c_hsotg *hsotg, hs_ep->ep.maxpacket = epnum ? 512 : EP0_MPS_LIMIT; hs_ep->ep.ops = &s3c_hsotg_ep_ops; - /* Read the FIFO size for the Periodic TX FIFO, even if we're + /* + * Read the FIFO size for the Periodic TX FIFO, even if we're * an OUT endpoint, we may as well do this if in future the * code is changed to make each endpoint's direction changeable. */ - ptxfifo = readl(hsotg->regs + S3C_DPTXFSIZn(epnum)); - hs_ep->fifo_size = S3C_DPTXFSIZn_DPTxFSize_GET(ptxfifo) * 4; + ptxfifo = readl(hsotg->regs + DPTXFSIZn(epnum)); + hs_ep->fifo_size = DPTXFSIZn_DPTxFSize_GET(ptxfifo) * 4; - /* if we're using dma, we need to set the next-endpoint pointer + /* + * if we're using dma, we need to set the next-endpoint pointer * to be something valid. */ if (using_dma(hsotg)) { - u32 next = S3C_DxEPCTL_NextEp((epnum + 1) % 15); - writel(next, hsotg->regs + S3C_DIEPCTL(epnum)); - writel(next, hsotg->regs + S3C_DOEPCTL(epnum)); + u32 next = DxEPCTL_NextEp((epnum + 1) % 15); + writel(next, hsotg->regs + DIEPCTL(epnum)); + writel(next, hsotg->regs + DOEPCTL(epnum)); } } /** - * s3c_hsotg_otgreset - reset the OtG phy block - * @hsotg: The host state. + * s3c_hsotg_hw_cfg - read HW configuration registers + * @param: The device state * - * Power up the phy, set the basic configuration and start the PHY. + * Read the USB core HW configuration registers */ -static void s3c_hsotg_otgreset(struct s3c_hsotg *hsotg) +static void s3c_hsotg_hw_cfg(struct s3c_hsotg *hsotg) { - struct clk *xusbxti; - u32 pwr, osc; - - pwr = readl(S3C_PHYPWR); - pwr &= ~0x19; - writel(pwr, S3C_PHYPWR); - mdelay(1); - - osc = hsotg->plat->is_osc ? S3C_PHYCLK_EXT_OSC : 0; - - xusbxti = clk_get(hsotg->dev, "xusbxti"); - if (xusbxti && !IS_ERR(xusbxti)) { - switch (clk_get_rate(xusbxti)) { - case 12*MHZ: - osc |= S3C_PHYCLK_CLKSEL_12M; - break; - case 24*MHZ: - osc |= S3C_PHYCLK_CLKSEL_24M; - break; - default: - case 48*MHZ: - /* default reference clock */ - break; - } - clk_put(xusbxti); - } - - writel(osc | 0x10, S3C_PHYCLK); - - /* issue a full set of resets to the otg and core */ - - writel(S3C_RSTCON_PHY, S3C_RSTCON); - udelay(20); /* at-least 10uS */ - writel(0, S3C_RSTCON); -} - - -static void s3c_hsotg_init(struct s3c_hsotg *hsotg) -{ - u32 cfg4; - - /* unmask subset of endpoint interrupts */ - - writel(S3C_DIEPMSK_TimeOUTMsk | S3C_DIEPMSK_AHBErrMsk | - S3C_DIEPMSK_EPDisbldMsk | S3C_DIEPMSK_XferComplMsk, - hsotg->regs + S3C_DIEPMSK); - - writel(S3C_DOEPMSK_SetupMsk | S3C_DOEPMSK_AHBErrMsk | - S3C_DOEPMSK_EPDisbldMsk | S3C_DOEPMSK_XferComplMsk, - hsotg->regs + S3C_DOEPMSK); - - writel(0, hsotg->regs + S3C_DAINTMSK); - - /* Be in disconnected state until gadget is registered */ - __orr32(hsotg->regs + S3C_DCTL, S3C_DCTL_SftDiscon); - - if (0) { - /* post global nak until we're ready */ - writel(S3C_DCTL_SGNPInNAK | S3C_DCTL_SGOUTNak, - hsotg->regs + S3C_DCTL); - } - - /* setup fifos */ - - dev_dbg(hsotg->dev, "GRXFSIZ=0x%08x, GNPTXFSIZ=0x%08x\n", - readl(hsotg->regs + S3C_GRXFSIZ), - readl(hsotg->regs + S3C_GNPTXFSIZ)); - - s3c_hsotg_init_fifo(hsotg); - - /* set the PLL on, remove the HNP/SRP and set the PHY */ - writel(S3C_GUSBCFG_PHYIf16 | S3C_GUSBCFG_TOutCal(7) | (0x5 << 10), - hsotg->regs + S3C_GUSBCFG); + u32 cfg2, cfg4; + /* check hardware configuration */ - writel(using_dma(hsotg) ? S3C_GAHBCFG_DMAEn : 0x0, - hsotg->regs + S3C_GAHBCFG); + cfg2 = readl(hsotg->regs + 0x48); + hsotg->num_of_eps = (cfg2 >> 10) & 0xF; - /* check hardware configuration */ + dev_info(hsotg->dev, "EPs:%d\n", hsotg->num_of_eps); cfg4 = readl(hsotg->regs + 0x50); hsotg->dedicated_fifos = (cfg4 >> 25) & 1; @@ -2937,6 +3118,10 @@ static void s3c_hsotg_init(struct s3c_hsotg *hsotg) hsotg->dedicated_fifos ? "dedicated" : "shared"); } +/** + * s3c_hsotg_dump - dump state of the udc + * @param: The device state + */ static void s3c_hsotg_dump(struct s3c_hsotg *hsotg) { #ifdef DEBUG @@ -2946,46 +3131,45 @@ static void s3c_hsotg_dump(struct s3c_hsotg *hsotg) int idx; dev_info(dev, "DCFG=0x%08x, DCTL=0x%08x, DIEPMSK=%08x\n", - readl(regs + S3C_DCFG), readl(regs + S3C_DCTL), - readl(regs + S3C_DIEPMSK)); + readl(regs + DCFG), readl(regs + DCTL), + readl(regs + DIEPMSK)); dev_info(dev, "GAHBCFG=0x%08x, 0x44=0x%08x\n", - readl(regs + S3C_GAHBCFG), readl(regs + 0x44)); + readl(regs + GAHBCFG), readl(regs + 0x44)); dev_info(dev, "GRXFSIZ=0x%08x, GNPTXFSIZ=0x%08x\n", - readl(regs + S3C_GRXFSIZ), readl(regs + S3C_GNPTXFSIZ)); + readl(regs + GRXFSIZ), readl(regs + GNPTXFSIZ)); /* show periodic fifo settings */ for (idx = 1; idx <= 15; idx++) { - val = readl(regs + S3C_DPTXFSIZn(idx)); + val = readl(regs + DPTXFSIZn(idx)); dev_info(dev, "DPTx[%d] FSize=%d, StAddr=0x%08x\n", idx, - val >> S3C_DPTXFSIZn_DPTxFSize_SHIFT, - val & S3C_DPTXFSIZn_DPTxFStAddr_MASK); + val >> DPTXFSIZn_DPTxFSize_SHIFT, + val & DPTXFSIZn_DPTxFStAddr_MASK); } for (idx = 0; idx < 15; idx++) { dev_info(dev, "ep%d-in: EPCTL=0x%08x, SIZ=0x%08x, DMA=0x%08x\n", idx, - readl(regs + S3C_DIEPCTL(idx)), - readl(regs + S3C_DIEPTSIZ(idx)), - readl(regs + S3C_DIEPDMA(idx))); + readl(regs + DIEPCTL(idx)), + readl(regs + DIEPTSIZ(idx)), + readl(regs + DIEPDMA(idx))); - val = readl(regs + S3C_DOEPCTL(idx)); + val = readl(regs + DOEPCTL(idx)); dev_info(dev, "ep%d-out: EPCTL=0x%08x, SIZ=0x%08x, DMA=0x%08x\n", - idx, readl(regs + S3C_DOEPCTL(idx)), - readl(regs + S3C_DOEPTSIZ(idx)), - readl(regs + S3C_DOEPDMA(idx))); + idx, readl(regs + DOEPCTL(idx)), + readl(regs + DOEPTSIZ(idx)), + readl(regs + DOEPDMA(idx))); } dev_info(dev, "DVBUSDIS=0x%08x, DVBUSPULSE=%08x\n", - readl(regs + S3C_DVBUSDIS), readl(regs + S3C_DVBUSPULSE)); + readl(regs + DVBUSDIS), readl(regs + DVBUSPULSE)); #endif } - /** * state_show - debugfs: show overall driver and device state. * @seq: The seq file to write to. @@ -3002,38 +3186,38 @@ static int state_show(struct seq_file *seq, void *v) int idx; seq_printf(seq, "DCFG=0x%08x, DCTL=0x%08x, DSTS=0x%08x\n", - readl(regs + S3C_DCFG), - readl(regs + S3C_DCTL), - readl(regs + S3C_DSTS)); + readl(regs + DCFG), + readl(regs + DCTL), + readl(regs + DSTS)); seq_printf(seq, "DIEPMSK=0x%08x, DOEPMASK=0x%08x\n", - readl(regs + S3C_DIEPMSK), readl(regs + S3C_DOEPMSK)); + readl(regs + DIEPMSK), readl(regs + DOEPMSK)); seq_printf(seq, "GINTMSK=0x%08x, GINTSTS=0x%08x\n", - readl(regs + S3C_GINTMSK), - readl(regs + S3C_GINTSTS)); + readl(regs + GINTMSK), + readl(regs + GINTSTS)); seq_printf(seq, "DAINTMSK=0x%08x, DAINT=0x%08x\n", - readl(regs + S3C_DAINTMSK), - readl(regs + S3C_DAINT)); + readl(regs + DAINTMSK), + readl(regs + DAINT)); seq_printf(seq, "GNPTXSTS=0x%08x, GRXSTSR=%08x\n", - readl(regs + S3C_GNPTXSTS), - readl(regs + S3C_GRXSTSR)); + readl(regs + GNPTXSTS), + readl(regs + GRXSTSR)); seq_printf(seq, "\nEndpoint status:\n"); for (idx = 0; idx < 15; idx++) { u32 in, out; - in = readl(regs + S3C_DIEPCTL(idx)); - out = readl(regs + S3C_DOEPCTL(idx)); + in = readl(regs + DIEPCTL(idx)); + out = readl(regs + DOEPCTL(idx)); seq_printf(seq, "ep%d: DIEPCTL=0x%08x, DOEPCTL=0x%08x", idx, in, out); - in = readl(regs + S3C_DIEPTSIZ(idx)); - out = readl(regs + S3C_DOEPTSIZ(idx)); + in = readl(regs + DIEPTSIZ(idx)); + out = readl(regs + DOEPTSIZ(idx)); seq_printf(seq, ", DIEPTSIZ=0x%08x, DOEPTSIZ=0x%08x", in, out); @@ -3064,7 +3248,7 @@ static const struct file_operations state_fops = { * * Show the FIFO information for the overall fifo and all the * periodic transmission FIFOs. -*/ + */ static int fifo_show(struct seq_file *seq, void *v) { struct s3c_hsotg *hsotg = seq->private; @@ -3073,21 +3257,21 @@ static int fifo_show(struct seq_file *seq, void *v) int idx; seq_printf(seq, "Non-periodic FIFOs:\n"); - seq_printf(seq, "RXFIFO: Size %d\n", readl(regs + S3C_GRXFSIZ)); + seq_printf(seq, "RXFIFO: Size %d\n", readl(regs + GRXFSIZ)); - val = readl(regs + S3C_GNPTXFSIZ); + val = readl(regs + GNPTXFSIZ); seq_printf(seq, "NPTXFIFO: Size %d, Start 0x%08x\n", - val >> S3C_GNPTXFSIZ_NPTxFDep_SHIFT, - val & S3C_GNPTXFSIZ_NPTxFStAddr_MASK); + val >> GNPTXFSIZ_NPTxFDep_SHIFT, + val & GNPTXFSIZ_NPTxFStAddr_MASK); seq_printf(seq, "\nPeriodic TXFIFOs:\n"); for (idx = 1; idx <= 15; idx++) { - val = readl(regs + S3C_DPTXFSIZn(idx)); + val = readl(regs + DPTXFSIZn(idx)); seq_printf(seq, "\tDPTXFIFO%2d: Size %d, Start 0x%08x\n", idx, - val >> S3C_DPTXFSIZn_DPTxFSize_SHIFT, - val & S3C_DPTXFSIZn_DPTxFStAddr_MASK); + val >> DPTXFSIZn_DPTxFSize_SHIFT, + val & DPTXFSIZn_DPTxFStAddr_MASK); } return 0; @@ -3119,7 +3303,7 @@ static const char *decode_direction(int is_in) * * This debugfs entry shows the state of the given endpoint (one is * registered for each available). -*/ + */ static int ep_show(struct seq_file *seq, void *v) { struct s3c_hsotg_ep *ep = seq->private; @@ -3136,20 +3320,20 @@ static int ep_show(struct seq_file *seq, void *v) /* first show the register state */ seq_printf(seq, "\tDIEPCTL=0x%08x, DOEPCTL=0x%08x\n", - readl(regs + S3C_DIEPCTL(index)), - readl(regs + S3C_DOEPCTL(index))); + readl(regs + DIEPCTL(index)), + readl(regs + DOEPCTL(index))); seq_printf(seq, "\tDIEPDMA=0x%08x, DOEPDMA=0x%08x\n", - readl(regs + S3C_DIEPDMA(index)), - readl(regs + S3C_DOEPDMA(index))); + readl(regs + DIEPDMA(index)), + readl(regs + DOEPDMA(index))); seq_printf(seq, "\tDIEPINT=0x%08x, DOEPINT=0x%08x\n", - readl(regs + S3C_DIEPINT(index)), - readl(regs + S3C_DOEPINT(index))); + readl(regs + DIEPINT(index)), + readl(regs + DOEPINT(index))); seq_printf(seq, "\tDIEPTSIZ=0x%08x, DOEPTSIZ=0x%08x\n", - readl(regs + S3C_DIEPTSIZ(index)), - readl(regs + S3C_DOEPTSIZ(index))); + readl(regs + DIEPTSIZ(index)), + readl(regs + DOEPTSIZ(index))); seq_printf(seq, "\n"); seq_printf(seq, "mps %d\n", ep->ep.maxpacket); @@ -3199,7 +3383,7 @@ static const struct file_operations ep_fops = { * about the state of the system. The directory name is created * with the same name as the device itself, in case we end up * with multiple blocks in future systems. -*/ + */ static void __devinit s3c_hsotg_create_debug(struct s3c_hsotg *hsotg) { struct dentry *root; @@ -3228,7 +3412,7 @@ static void __devinit s3c_hsotg_create_debug(struct s3c_hsotg *hsotg) /* create one file for each endpoint */ - for (epidx = 0; epidx < S3C_HSOTG_EPS; epidx++) { + for (epidx = 0; epidx < hsotg->num_of_eps; epidx++) { struct s3c_hsotg_ep *ep = &hsotg->eps[epidx]; ep->debugfs = debugfs_create_file(ep->name, 0444, @@ -3245,12 +3429,12 @@ static void __devinit s3c_hsotg_create_debug(struct s3c_hsotg *hsotg) * @hsotg: The driver state * * Cleanup (remove) the debugfs files for use on module exit. -*/ + */ static void __devexit s3c_hsotg_delete_debug(struct s3c_hsotg *hsotg) { unsigned epidx; - for (epidx = 0; epidx < S3C_HSOTG_EPS; epidx++) { + for (epidx = 0; epidx < hsotg->num_of_eps; epidx++) { struct s3c_hsotg_ep *ep = &hsotg->eps[epidx]; debugfs_remove(ep->debugfs); } @@ -3261,48 +3445,39 @@ static void __devexit s3c_hsotg_delete_debug(struct s3c_hsotg *hsotg) } /** - * s3c_hsotg_gate - set the hardware gate for the block - * @pdev: The device we bound to - * @on: On or off. - * - * Set the hardware gate setting into the block. If we end up on - * something other than an S3C64XX, then we might need to change this - * to using a platform data callback, or some other mechanism. + * s3c_hsotg_release - release callback for hsotg device + * @dev: Device to for which release is called */ -static void s3c_hsotg_gate(struct platform_device *pdev, bool on) +static void s3c_hsotg_release(struct device *dev) { - unsigned long flags; - u32 others; + struct s3c_hsotg *hsotg = dev_get_drvdata(dev); - local_irq_save(flags); - - others = __raw_readl(S3C64XX_OTHERS); - if (on) - others |= S3C64XX_OTHERS_USBMASK; - else - others &= ~S3C64XX_OTHERS_USBMASK; - __raw_writel(others, S3C64XX_OTHERS); - - local_irq_restore(flags); + kfree(hsotg); } -static struct s3c_hsotg_plat s3c_hsotg_default_pdata; +/** + * s3c_hsotg_probe - probe function for hsotg driver + * @pdev: The platform information for the driver + */ static int __devinit s3c_hsotg_probe(struct platform_device *pdev) { struct s3c_hsotg_plat *plat = pdev->dev.platform_data; struct device *dev = &pdev->dev; + struct s3c_hsotg_ep *eps; struct s3c_hsotg *hsotg; struct resource *res; int epnum; int ret; + int i; - if (!plat) - plat = &s3c_hsotg_default_pdata; + plat = pdev->dev.platform_data; + if (!plat) { + dev_err(&pdev->dev, "no platform data defined\n"); + return -EINVAL; + } - hsotg = kzalloc(sizeof(struct s3c_hsotg) + - sizeof(struct s3c_hsotg_ep) * S3C_HSOTG_EPS, - GFP_KERNEL); + hsotg = kzalloc(sizeof(struct s3c_hsotg), GFP_KERNEL); if (!hsotg) { dev_err(dev, "cannot get memory\n"); return -ENOMEM; @@ -3368,6 +3543,54 @@ static int __devinit s3c_hsotg_probe(struct platform_device *pdev) hsotg->gadget.dev.parent = dev; hsotg->gadget.dev.dma_mask = dev->dma_mask; + hsotg->gadget.dev.release = s3c_hsotg_release; + + /* reset the system */ + + clk_prepare_enable(hsotg->clk); + + /* regulators */ + + for (i = 0; i < ARRAY_SIZE(hsotg->supplies); i++) + hsotg->supplies[i].supply = s3c_hsotg_supply_names[i]; + + ret = regulator_bulk_get(dev, ARRAY_SIZE(hsotg->supplies), + hsotg->supplies); + if (ret) { + dev_err(dev, "failed to request supplies: %d\n", ret); + goto err_irq; + } + + ret = regulator_bulk_enable(ARRAY_SIZE(hsotg->supplies), + hsotg->supplies); + + if (ret) { + dev_err(hsotg->dev, "failed to enable supplies: %d\n", ret); + goto err_supplies; + } + + /* usb phy enable */ + s3c_hsotg_phy_enable(hsotg); + + s3c_hsotg_corereset(hsotg); + s3c_hsotg_init(hsotg); + s3c_hsotg_hw_cfg(hsotg); + + /* hsotg->num_of_eps holds number of EPs other than ep0 */ + + if (hsotg->num_of_eps == 0) { + dev_err(dev, "wrong number of EPs (zero)\n"); + goto err_supplies; + } + + eps = kcalloc(hsotg->num_of_eps + 1, sizeof(struct s3c_hsotg_ep), + GFP_KERNEL); + if (!eps) { + dev_err(dev, "cannot get memory\n"); + goto err_supplies; + } + + hsotg->eps = eps; /* setup endpoint information */ @@ -3380,39 +3603,47 @@ static int __devinit s3c_hsotg_probe(struct platform_device *pdev) GFP_KERNEL); if (!hsotg->ctrl_req) { dev_err(dev, "failed to allocate ctrl req\n"); - goto err_regs; + goto err_ep_mem; } - /* reset the system */ + /* initialise the endpoints now the core has been initialised */ + for (epnum = 0; epnum < hsotg->num_of_eps; epnum++) + s3c_hsotg_initep(hsotg, &hsotg->eps[epnum], epnum); - clk_enable(hsotg->clk); + /* disable power and clock */ - s3c_hsotg_gate(pdev, true); + ret = regulator_bulk_disable(ARRAY_SIZE(hsotg->supplies), + hsotg->supplies); + if (ret) { + dev_err(hsotg->dev, "failed to disable supplies: %d\n", ret); + goto err_ep_mem; + } - s3c_hsotg_otgreset(hsotg); - s3c_hsotg_corereset(hsotg); - s3c_hsotg_init(hsotg); + s3c_hsotg_phy_disable(hsotg); - /* initialise the endpoints now the core has been initialised */ - for (epnum = 0; epnum < S3C_HSOTG_EPS; epnum++) - s3c_hsotg_initep(hsotg, &hsotg->eps[epnum], epnum); + ret = device_add(&hsotg->gadget.dev); + if (ret) { + put_device(&hsotg->gadget.dev); + goto err_ep_mem; + } ret = usb_add_gadget_udc(&pdev->dev, &hsotg->gadget); if (ret) - goto err_add_udc; + goto err_ep_mem; s3c_hsotg_create_debug(hsotg); s3c_hsotg_dump(hsotg); - our_hsotg = hsotg; return 0; -err_add_udc: - s3c_hsotg_gate(pdev, false); - clk_disable(hsotg->clk); - clk_put(hsotg->clk); - +err_ep_mem: + kfree(eps); +err_supplies: + s3c_hsotg_phy_disable(hsotg); + regulator_bulk_free(ARRAY_SIZE(hsotg->supplies), hsotg->supplies); +err_irq: + free_irq(hsotg->irq, hsotg); err_regs: iounmap(hsotg->regs); @@ -3420,12 +3651,17 @@ err_regs_res: release_resource(hsotg->regs_res); kfree(hsotg->regs_res); err_clk: + clk_disable_unprepare(hsotg->clk); clk_put(hsotg->clk); err_mem: kfree(hsotg); return ret; } +/** + * s3c_hsotg_remove - remove function for hsotg driver + * @pdev: The platform information for the driver + */ static int __devexit s3c_hsotg_remove(struct platform_device *pdev) { struct s3c_hsotg *hsotg = platform_get_drvdata(pdev); @@ -3434,7 +3670,10 @@ static int __devexit s3c_hsotg_remove(struct platform_device *pdev) s3c_hsotg_delete_debug(hsotg); - usb_gadget_unregister_driver(hsotg->driver); + if (hsotg->driver) { + /* should have been done already by driver model core */ + usb_gadget_unregister_driver(hsotg->driver); + } free_irq(hsotg->irq, hsotg); iounmap(hsotg->regs); @@ -3442,12 +3681,13 @@ static int __devexit s3c_hsotg_remove(struct platform_device *pdev) release_resource(hsotg->regs_res); kfree(hsotg->regs_res); - s3c_hsotg_gate(pdev, false); + s3c_hsotg_phy_disable(hsotg); + regulator_bulk_free(ARRAY_SIZE(hsotg->supplies), hsotg->supplies); - clk_disable(hsotg->clk); + clk_disable_unprepare(hsotg->clk); clk_put(hsotg->clk); - kfree(hsotg); + device_unregister(&hsotg->gadget.dev); return 0; } |