diff options
Diffstat (limited to 'drivers/usb/gadget/legacy/Kconfig')
| -rw-r--r-- | drivers/usb/gadget/legacy/Kconfig | 475 |
1 files changed, 475 insertions, 0 deletions
diff --git a/drivers/usb/gadget/legacy/Kconfig b/drivers/usb/gadget/legacy/Kconfig new file mode 100644 index 000000000000..aa376f006333 --- /dev/null +++ b/drivers/usb/gadget/legacy/Kconfig @@ -0,0 +1,475 @@ +# +# USB Gadget support on a system involves +# (a) a peripheral controller, and +# (b) the gadget driver using it. +# +# NOTE: Gadget support ** DOES NOT ** depend on host-side CONFIG_USB !! +# +# - Host systems (like PCs) need CONFIG_USB (with "A" jacks). +# - Peripherals (like PDAs) need CONFIG_USB_GADGET (with "B" jacks). +# - Some systems have both kinds of controllers. +# +# With help from a special transceiver and a "Mini-AB" jack, systems with +# both kinds of controller can also support "USB On-the-Go" (CONFIG_USB_OTG). +# + +config USB_ZERO + tristate "Gadget Zero (DEVELOPMENT)" + select USB_LIBCOMPOSITE + select USB_F_SS_LB + help + Gadget Zero is a two-configuration device. It either sinks and + sources bulk data; or it loops back a configurable number of + transfers. It also implements control requests, for "chapter 9" + conformance. The driver needs only two bulk-capable endpoints, so + it can work on top of most device-side usb controllers. It's + useful for testing, and is also a working example showing how + USB "gadget drivers" can be written. + + Make this be the first driver you try using on top of any new + USB peripheral controller driver. Then you can use host-side + test software, like the "usbtest" driver, to put your hardware + and its driver through a basic set of functional tests. + + Gadget Zero also works with the host-side "usb-skeleton" driver, + and with many kinds of host-side test software. You may need + to tweak product and vendor IDs before host software knows about + this device, and arrange to select an appropriate configuration. + + Say "y" to link the driver statically, or "m" to build a + dynamically linked module called "g_zero". + +config USB_ZERO_HNPTEST + boolean "HNP Test Device" + depends on USB_ZERO && USB_OTG + help + You can configure this device to enumerate using the device + identifiers of the USB-OTG test device. That means that when + this gadget connects to another OTG device, with this one using + the "B-Peripheral" role, that device will use HNP to let this + one serve as the USB host instead (in the "B-Host" role). + +config USB_AUDIO + tristate "Audio Gadget" + depends on SND + select USB_LIBCOMPOSITE + select SND_PCM + help + This Gadget Audio driver is compatible with USB Audio Class + specification 2.0. It implements 1 AudioControl interface, + 1 AudioStreaming Interface each for USB-OUT and USB-IN. + Number of channels, sample rate and sample size can be + specified as module parameters. + This driver doesn't expect any real Audio codec to be present + on the device - the audio streams are simply sinked to and + sourced from a virtual ALSA sound card created. The user-space + application may choose to do whatever it wants with the data + received from the USB Host and choose to provide whatever it + wants as audio data to the USB Host. + + Say "y" to link the driver statically, or "m" to build a + dynamically linked module called "g_audio". + +config GADGET_UAC1 + bool "UAC 1.0 (Legacy)" + depends on USB_AUDIO + help + If you instead want older UAC Spec-1.0 driver that also has audio + paths hardwired to the Audio codec chip on-board and doesn't work + without one. + +config USB_ETH + tristate "Ethernet Gadget (with CDC Ethernet support)" + depends on NET + select USB_LIBCOMPOSITE + select USB_U_ETHER + select USB_F_ECM + select USB_F_SUBSET + select CRC32 + help + This driver implements Ethernet style communication, in one of + several ways: + + - The "Communication Device Class" (CDC) Ethernet Control Model. + That protocol is often avoided with pure Ethernet adapters, in + favor of simpler vendor-specific hardware, but is widely + supported by firmware for smart network devices. + + - On hardware can't implement that protocol, a simple CDC subset + is used, placing fewer demands on USB. + + - CDC Ethernet Emulation Model (EEM) is a newer standard that has + a simpler interface that can be used by more USB hardware. + + RNDIS support is an additional option, more demanding than than + subset. + + Within the USB device, this gadget driver exposes a network device + "usbX", where X depends on what other networking devices you have. + Treat it like a two-node Ethernet link: host, and gadget. + + The Linux-USB host-side "usbnet" driver interoperates with this + driver, so that deep I/O queues can be supported. On 2.4 kernels, + use "CDCEther" instead, if you're using the CDC option. That CDC + mode should also interoperate with standard CDC Ethernet class + drivers on other host operating systems. + + Say "y" to link the driver statically, or "m" to build a + dynamically linked module called "g_ether". + +config USB_ETH_RNDIS + bool "RNDIS support" + depends on USB_ETH + select USB_LIBCOMPOSITE + select USB_F_RNDIS + default y + help + Microsoft Windows XP bundles the "Remote NDIS" (RNDIS) protocol, + and Microsoft provides redistributable binary RNDIS drivers for + older versions of Windows. + + If you say "y" here, the Ethernet gadget driver will try to provide + a second device configuration, supporting RNDIS to talk to such + Microsoft USB hosts. + + To make MS-Windows work with this, use Documentation/usb/linux.inf + as the "driver info file". For versions of MS-Windows older than + XP, you'll need to download drivers from Microsoft's website; a URL + is given in comments found in that info file. + +config USB_ETH_EEM + bool "Ethernet Emulation Model (EEM) support" + depends on USB_ETH + select USB_LIBCOMPOSITE + select USB_F_EEM + default n + help + CDC EEM is a newer USB standard that is somewhat simpler than CDC ECM + and therefore can be supported by more hardware. Technically ECM and + EEM are designed for different applications. The ECM model extends + the network interface to the target (e.g. a USB cable modem), and the + EEM model is for mobile devices to communicate with hosts using + ethernet over USB. For Linux gadgets, however, the interface with + the host is the same (a usbX device), so the differences are minimal. + + If you say "y" here, the Ethernet gadget driver will use the EEM + protocol rather than ECM. If unsure, say "n". + +config USB_G_NCM + tristate "Network Control Model (NCM) support" + depends on NET + select USB_LIBCOMPOSITE + select USB_U_ETHER + select USB_F_NCM + select CRC32 + help + This driver implements USB CDC NCM subclass standard. NCM is + an advanced protocol for Ethernet encapsulation, allows grouping + of several ethernet frames into one USB transfer and different + alignment possibilities. + + Say "y" to link the driver statically, or "m" to build a + dynamically linked module called "g_ncm". + +config USB_GADGETFS + tristate "Gadget Filesystem" + help + This driver provides a filesystem based API that lets user mode + programs implement a single-configuration USB device, including + endpoint I/O and control requests that don't relate to enumeration. + All endpoints, transfer speeds, and transfer types supported by + the hardware are available, through read() and write() calls. + + Say "y" to link the driver statically, or "m" to build a + dynamically linked module called "gadgetfs". + +config USB_FUNCTIONFS + tristate "Function Filesystem" + select USB_LIBCOMPOSITE + select USB_F_FS + select USB_FUNCTIONFS_GENERIC if !(USB_FUNCTIONFS_ETH || USB_FUNCTIONFS_RNDIS) + help + The Function Filesystem (FunctionFS) lets one create USB + composite functions in user space in the same way GadgetFS + lets one create USB gadgets in user space. This allows creation + of composite gadgets such that some of the functions are + implemented in kernel space (for instance Ethernet, serial or + mass storage) and other are implemented in user space. + + If you say "y" or "m" here you will be able what kind of + configurations the gadget will provide. + + Say "y" to link the driver statically, or "m" to build + a dynamically linked module called "g_ffs". + +config USB_FUNCTIONFS_ETH + bool "Include configuration with CDC ECM (Ethernet)" + depends on USB_FUNCTIONFS && NET + select USB_U_ETHER + select USB_F_ECM + select USB_F_SUBSET + help + Include a configuration with CDC ECM function (Ethernet) and the + Function Filesystem. + +config USB_FUNCTIONFS_RNDIS + bool "Include configuration with RNDIS (Ethernet)" + depends on USB_FUNCTIONFS && NET + select USB_U_ETHER + select USB_F_RNDIS + help + Include a configuration with RNDIS function (Ethernet) and the Filesystem. + +config USB_FUNCTIONFS_GENERIC + bool "Include 'pure' configuration" + depends on USB_FUNCTIONFS + help + Include a configuration with the Function Filesystem alone with + no Ethernet interface. + +config USB_MASS_STORAGE + tristate "Mass Storage Gadget" + depends on BLOCK + select USB_LIBCOMPOSITE + select USB_F_MASS_STORAGE + help + The Mass Storage Gadget acts as a USB Mass Storage disk drive. + As its storage repository it can use a regular file or a block + device (in much the same way as the "loop" device driver), + specified as a module parameter or sysfs option. + + This driver is a replacement for now removed File-backed + Storage Gadget (g_file_storage). + + Say "y" to link the driver statically, or "m" to build + a dynamically linked module called "g_mass_storage". + +config USB_GADGET_TARGET + tristate "USB Gadget Target Fabric Module" + depends on TARGET_CORE + select USB_LIBCOMPOSITE + help + This fabric is an USB gadget. Two USB protocols are supported that is + BBB or BOT (Bulk Only Transport) and UAS (USB Attached SCSI). BOT is + advertised on alternative interface 0 (primary) and UAS is on + alternative interface 1. Both protocols can work on USB2.0 and USB3.0. + UAS utilizes the USB 3.0 feature called streams support. + +config USB_G_SERIAL + tristate "Serial Gadget (with CDC ACM and CDC OBEX support)" + depends on TTY + select USB_U_SERIAL + select USB_F_ACM + select USB_F_SERIAL + select USB_F_OBEX + select USB_LIBCOMPOSITE + help + The Serial Gadget talks to the Linux-USB generic serial driver. + This driver supports a CDC-ACM module option, which can be used + to interoperate with MS-Windows hosts or with the Linux-USB + "cdc-acm" driver. + + This driver also supports a CDC-OBEX option. You will need a + user space OBEX server talking to /dev/ttyGS*, since the kernel + itself doesn't implement the OBEX protocol. + + Say "y" to link the driver statically, or "m" to build a + dynamically linked module called "g_serial". + + For more information, see Documentation/usb/gadget_serial.txt + which includes instructions and a "driver info file" needed to + make MS-Windows work with CDC ACM. + +config USB_MIDI_GADGET + tristate "MIDI Gadget" + depends on SND + select USB_LIBCOMPOSITE + select SND_RAWMIDI + help + The MIDI Gadget acts as a USB Audio device, with one MIDI + input and one MIDI output. These MIDI jacks appear as + a sound "card" in the ALSA sound system. Other MIDI + connections can then be made on the gadget system, using + ALSA's aconnect utility etc. + + Say "y" to link the driver statically, or "m" to build a + dynamically linked module called "g_midi". + +config USB_G_PRINTER + tristate "Printer Gadget" + select USB_LIBCOMPOSITE + help + The Printer Gadget channels data between the USB host and a + userspace program driving the print engine. The user space + program reads and writes the device file /dev/g_printer to + receive or send printer data. It can use ioctl calls to + the device file to get or set printer status. + + Say "y" to link the driver statically, or "m" to build a + dynamically linked module called "g_printer". + + For more information, see Documentation/usb/gadget_printer.txt + which includes sample code for accessing the device file. + +if TTY + +config USB_CDC_COMPOSITE + tristate "CDC Composite Device (Ethernet and ACM)" + depends on NET + select USB_LIBCOMPOSITE + select USB_U_SERIAL + select USB_U_ETHER + select USB_F_ACM + select USB_F_ECM + help + This driver provides two functions in one configuration: + a CDC Ethernet (ECM) link, and a CDC ACM (serial port) link. + + This driver requires four bulk and two interrupt endpoints, + plus the ability to handle altsettings. Not all peripheral + controllers are that capable. + + Say "y" to link the driver statically, or "m" to build a + dynamically linked module. + +config USB_G_NOKIA + tristate "Nokia composite gadget" + depends on PHONET + select USB_LIBCOMPOSITE + select USB_U_SERIAL + select USB_U_ETHER + select USB_F_ACM + select USB_F_OBEX + select USB_F_PHONET + select USB_F_ECM + help + The Nokia composite gadget provides support for acm, obex + and phonet in only one composite gadget driver. + + It's only really useful for N900 hardware. If you're building + a kernel for N900, say Y or M here. If unsure, say N. + +config USB_G_ACM_MS + tristate "CDC Composite Device (ACM and mass storage)" + depends on BLOCK + select USB_LIBCOMPOSITE + select USB_U_SERIAL + select USB_F_ACM + select USB_F_MASS_STORAGE + help + This driver provides two functions in one configuration: + a mass storage, and a CDC ACM (serial port) link. + + Say "y" to link the driver statically, or "m" to build a + dynamically linked module called "g_acm_ms". + +config USB_G_MULTI + tristate "Multifunction Composite Gadget" + depends on BLOCK && NET + select USB_G_MULTI_CDC if !USB_G_MULTI_RNDIS + select USB_LIBCOMPOSITE + select USB_U_SERIAL + select USB_U_ETHER + select USB_F_ACM + select USB_F_MASS_STORAGE + help + The Multifunction Composite Gadget provides Ethernet (RNDIS + and/or CDC Ethernet), mass storage and ACM serial link + interfaces. + + You will be asked to choose which of the two configurations is + to be available in the gadget. At least one configuration must + be chosen to make the gadget usable. Selecting more than one + configuration will prevent Windows from automatically detecting + the gadget as a composite gadget, so an INF file will be needed to + use the gadget. + + Say "y" to link the driver statically, or "m" to build a + dynamically linked module called "g_multi". + +config USB_G_MULTI_RNDIS + bool "RNDIS + CDC Serial + Storage configuration" + depends on USB_G_MULTI + select USB_F_RNDIS + default y + help + This option enables a configuration with RNDIS, CDC Serial and + Mass Storage functions available in the Multifunction Composite + Gadget. This is the configuration dedicated for Windows since RNDIS + is Microsoft's protocol. + + If unsure, say "y". + +config USB_G_MULTI_CDC + bool "CDC Ethernet + CDC Serial + Storage configuration" + depends on USB_G_MULTI + default n + select USB_F_ECM + help + This option enables a configuration with CDC Ethernet (ECM), CDC + Serial and Mass Storage functions available in the Multifunction + Composite Gadget. + + If unsure, say "y". + +endif # TTY + +config USB_G_HID + tristate "HID Gadget" + select USB_LIBCOMPOSITE + help + The HID gadget driver provides generic emulation of USB + Human Interface Devices (HID). + + For more information, see Documentation/usb/gadget_hid.txt which + includes sample code for accessing the device files. + + Say "y" to link the driver statically, or "m" to build a + dynamically linked module called "g_hid". + +# Standalone / single function gadgets +config USB_G_DBGP + tristate "EHCI Debug Device Gadget" + depends on TTY + select USB_LIBCOMPOSITE + help + This gadget emulates an EHCI Debug device. This is useful when you want + to interact with an EHCI Debug Port. + + Say "y" to link the driver statically, or "m" to build a + dynamically linked module called "g_dbgp". + +if USB_G_DBGP +choice + prompt "EHCI Debug Device mode" + default USB_G_DBGP_SERIAL + +config USB_G_DBGP_PRINTK + depends on USB_G_DBGP + bool "printk" + help + Directly printk() received data. No interaction. + +config USB_G_DBGP_SERIAL + depends on USB_G_DBGP + select USB_U_SERIAL + bool "serial" + help + Userland can interact using /dev/ttyGSxxx. +endchoice +endif + +# put drivers that need isochronous transfer support (for audio +# or video class gadget drivers), or specific hardware, here. +config USB_G_WEBCAM + tristate "USB Webcam Gadget" + depends on VIDEO_DEV + select USB_LIBCOMPOSITE + select VIDEOBUF2_VMALLOC + help + The Webcam Gadget acts as a composite USB Audio and Video Class + device. It provides a userspace API to process UVC control requests + and stream video data to the host. + + Say "y" to link the driver statically, or "m" to build a + dynamically linked module called "g_webcam". |