diff options
Diffstat (limited to 'drivers/usb/gadget/Kconfig')
| -rw-r--r-- | drivers/usb/gadget/Kconfig | 47 |
1 files changed, 42 insertions, 5 deletions
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig index 5a084b9cfa3c..b21cd376c11a 100644 --- a/drivers/usb/gadget/Kconfig +++ b/drivers/usb/gadget/Kconfig @@ -96,6 +96,22 @@ config USB_GADGET_VBUS_DRAW This value will be used except for system-specific gadget drivers that have more specific information. +config USB_GADGET_STORAGE_NUM_BUFFERS + int "Number of storage pipeline buffers" + range 2 4 + default 2 + help + Usually 2 buffers are enough to establish a good buffering + pipeline. The number may be increased in order to compensate + for a bursty VFS behaviour. For instance there may be CPU wake up + latencies that makes the VFS to appear bursty in a system with + an CPU on-demand governor. Especially if DMA is doing IO to + offload the CPU. In this case the CPU will go into power + save often and spin up occasionally to move data within VFS. + If selecting USB_GADGET_DEBUG_FILES this value may be set by + a module parameter as well. + If unsure, say 2. + # # USB Peripheral Controller Support # @@ -255,12 +271,11 @@ config USB_S3C_HSOTG integrated into the S3C64XX series SoC. config USB_IMX - tristate "Freescale IMX USB Peripheral Controller" - depends on ARCH_MX1 + tristate "Freescale i.MX1 USB Peripheral Controller" + depends on ARCH_MXC help - Freescale's IMX series include an integrated full speed - USB 1.1 device controller. The controller in the IMX series - is register-compatible. + Freescale's i.MX1 includes an integrated full speed + USB 1.1 device controller. It has Six fixed-function endpoints, as well as endpoint zero (for control transfers). @@ -303,6 +318,18 @@ config USB_PXA_U2O PXA9xx Processor series include a high speed USB2.0 device controller, which support high speed and full speed USB peripheral. +config USB_GADGET_DWC3 + tristate "DesignWare USB3.0 (DRD) Controller" + depends on USB_DWC3 + select USB_GADGET_DUALSPEED + select USB_GADGET_SUPERSPEED + help + DesignWare USB3.0 controller is a SuperSpeed USB3.0 Controller + which can be configured for peripheral-only, host-only, hub-only + and Dual-Role operation. This Controller was first integrated into + the OMAP5 series of processors. More information about the OMAP5 + version of this controller, refer to http://www.ti.com/omap5. + # # Controllers available in both integrated and discrete versions # @@ -846,6 +873,16 @@ config USB_G_NOKIA It's only really useful for N900 hardware. If you're building a kernel for N900, say Y or M here. If unsure, say N. +config USB_G_ACM_MS + tristate "CDC Composite Device (ACM and mass storage)" + depends on BLOCK + help + This driver provides two functions in one configuration: + a mass storage, and a CDC ACM (serial port) link. + + Say "y" to link the driver statically, or "m" to build a + dynamically linked module called "g_acm_ms". + config USB_G_MULTI tristate "Multifunction Composite Gadget (EXPERIMENTAL)" depends on BLOCK && NET |