diff options
Diffstat (limited to 'drivers/usb/dwc3/dwc3-omap.c')
| -rw-r--r-- | drivers/usb/dwc3/dwc3-omap.c | 401 |
1 files changed, 401 insertions, 0 deletions
diff --git a/drivers/usb/dwc3/dwc3-omap.c b/drivers/usb/dwc3/dwc3-omap.c new file mode 100644 index 000000000000..062552b5fc8a --- /dev/null +++ b/drivers/usb/dwc3/dwc3-omap.c @@ -0,0 +1,401 @@ +/** + * dwc3-omap.c - OMAP Specific Glue layer + * + * Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com + * + * Authors: Felipe Balbi <balbi@ti.com>, + * Sebastian Andrzej Siewior <bigeasy@linutronix.de> + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. The names of the above-listed copyright holders may not be used + * to endorse or promote products derived from this software without + * specific prior written permission. + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2, as published by the Free + * Software Foundation. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS + * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, + * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR + * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR + * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, + * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, + * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR + * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/interrupt.h> +#include <linux/spinlock.h> +#include <linux/platform_device.h> +#include <linux/platform_data/dwc3-omap.h> +#include <linux/dma-mapping.h> +#include <linux/ioport.h> +#include <linux/io.h> +#include <linux/module.h> + +#include "io.h" + +/* + * All these registers belong to OMAP's Wrapper around the + * DesignWare USB3 Core. + */ + +#define USBOTGSS_REVISION 0x0000 +#define USBOTGSS_SYSCONFIG 0x0010 +#define USBOTGSS_IRQ_EOI 0x0020 +#define USBOTGSS_IRQSTATUS_RAW_0 0x0024 +#define USBOTGSS_IRQSTATUS_0 0x0028 +#define USBOTGSS_IRQENABLE_SET_0 0x002c +#define USBOTGSS_IRQENABLE_CLR_0 0x0030 +#define USBOTGSS_IRQSTATUS_RAW_1 0x0034 +#define USBOTGSS_IRQSTATUS_1 0x0038 +#define USBOTGSS_IRQENABLE_SET_1 0x003c +#define USBOTGSS_IRQENABLE_CLR_1 0x0040 +#define USBOTGSS_UTMI_OTG_CTRL 0x0080 +#define USBOTGSS_UTMI_OTG_STATUS 0x0084 +#define USBOTGSS_MMRAM_OFFSET 0x0100 +#define USBOTGSS_FLADJ 0x0104 +#define USBOTGSS_DEBUG_CFG 0x0108 +#define USBOTGSS_DEBUG_DATA 0x010c + +/* SYSCONFIG REGISTER */ +#define USBOTGSS_SYSCONFIG_DMADISABLE (1 << 16) +#define USBOTGSS_SYSCONFIG_STANDBYMODE(x) ((x) << 4) + +#define USBOTGSS_STANDBYMODE_FORCE_STANDBY 0 +#define USBOTGSS_STANDBYMODE_NO_STANDBY 1 +#define USBOTGSS_STANDBYMODE_SMART_STANDBY 2 +#define USBOTGSS_STANDBYMODE_SMART_WAKEUP 3 + +#define USBOTGSS_STANDBYMODE_MASK (0x03 << 4) + +#define USBOTGSS_SYSCONFIG_IDLEMODE(x) ((x) << 2) + +#define USBOTGSS_IDLEMODE_FORCE_IDLE 0 +#define USBOTGSS_IDLEMODE_NO_IDLE 1 +#define USBOTGSS_IDLEMODE_SMART_IDLE 2 +#define USBOTGSS_IDLEMODE_SMART_WAKEUP 3 + +#define USBOTGSS_IDLEMODE_MASK (0x03 << 2) + +/* IRQ_EOI REGISTER */ +#define USBOTGSS_IRQ_EOI_LINE_NUMBER (1 << 0) + +/* IRQS0 BITS */ +#define USBOTGSS_IRQO_COREIRQ_ST (1 << 0) + +/* IRQ1 BITS */ +#define USBOTGSS_IRQ1_DMADISABLECLR (1 << 17) +#define USBOTGSS_IRQ1_OEVT (1 << 16) +#define USBOTGSS_IRQ1_DRVVBUS_RISE (1 << 13) +#define USBOTGSS_IRQ1_CHRGVBUS_RISE (1 << 12) +#define USBOTGSS_IRQ1_DISCHRGVBUS_RISE (1 << 11) +#define USBOTGSS_IRQ1_IDPULLUP_RISE (1 << 8) +#define USBOTGSS_IRQ1_DRVVBUS_FALL (1 << 5) +#define USBOTGSS_IRQ1_CHRGVBUS_FALL (1 << 4) +#define USBOTGSS_IRQ1_DISCHRGVBUS_FALL (1 << 3) +#define USBOTGSS_IRQ1_IDPULLUP_FALL (1 << 0) + +/* UTMI_OTG_CTRL REGISTER */ +#define USBOTGSS_UTMI_OTG_CTRL_DRVVBUS (1 << 5) +#define USBOTGSS_UTMI_OTG_CTRL_CHRGVBUS (1 << 4) +#define USBOTGSS_UTMI_OTG_CTRL_DISCHRGVBUS (1 << 3) +#define USBOTGSS_UTMI_OTG_CTRL_IDPULLUP (1 << 0) + +/* UTMI_OTG_STATUS REGISTER */ +#define USBOTGSS_UTMI_OTG_STATUS_SW_MODE (1 << 31) +#define USBOTGSS_UTMI_OTG_STATUS_POWERPRESENT (1 << 9) +#define USBOTGSS_UTMI_OTG_STATUS_TXBITSTUFFENABLE (1 << 8) +#define USBOTGSS_UTMI_OTG_STATUS_IDDIG (1 << 4) +#define USBOTGSS_UTMI_OTG_STATUS_SESSEND (1 << 3) +#define USBOTGSS_UTMI_OTG_STATUS_SESSVALID (1 << 2) +#define USBOTGSS_UTMI_OTG_STATUS_VBUSVALID (1 << 1) + +struct dwc3_omap { + /* device lock */ + spinlock_t lock; + + struct platform_device *dwc3; + struct device *dev; + + int irq; + void __iomem *base; + + void *context; + u32 resource_size; + + u32 dma_status:1; +}; + +static irqreturn_t dwc3_omap_interrupt(int irq, void *_omap) +{ + struct dwc3_omap *omap = _omap; + u32 reg; + + spin_lock(&omap->lock); + + reg = dwc3_readl(omap->base, USBOTGSS_IRQSTATUS_1); + + if (reg & USBOTGSS_IRQ1_DMADISABLECLR) { + dev_dbg(omap->dev, "DMA Disable was Cleared\n"); + omap->dma_status = false; + } + + if (reg & USBOTGSS_IRQ1_OEVT) + dev_dbg(omap->dev, "OTG Event\n"); + + if (reg & USBOTGSS_IRQ1_DRVVBUS_RISE) + dev_dbg(omap->dev, "DRVVBUS Rise\n"); + + if (reg & USBOTGSS_IRQ1_CHRGVBUS_RISE) + dev_dbg(omap->dev, "CHRGVBUS Rise\n"); + + if (reg & USBOTGSS_IRQ1_DISCHRGVBUS_RISE) + dev_dbg(omap->dev, "DISCHRGVBUS Rise\n"); + + if (reg & USBOTGSS_IRQ1_IDPULLUP_RISE) + dev_dbg(omap->dev, "IDPULLUP Rise\n"); + + if (reg & USBOTGSS_IRQ1_DRVVBUS_FALL) + dev_dbg(omap->dev, "DRVVBUS Fall\n"); + + if (reg & USBOTGSS_IRQ1_CHRGVBUS_FALL) + dev_dbg(omap->dev, "CHRGVBUS Fall\n"); + + if (reg & USBOTGSS_IRQ1_DISCHRGVBUS_FALL) + dev_dbg(omap->dev, "DISCHRGVBUS Fall\n"); + + if (reg & USBOTGSS_IRQ1_IDPULLUP_FALL) + dev_dbg(omap->dev, "IDPULLUP Fall\n"); + + dwc3_writel(omap->base, USBOTGSS_IRQSTATUS_1, reg); + + reg = dwc3_readl(omap->base, USBOTGSS_IRQSTATUS_0); + dwc3_writel(omap->base, USBOTGSS_IRQSTATUS_0, reg); + + spin_unlock(&omap->lock); + + return IRQ_HANDLED; +} + +static int __devinit dwc3_omap_probe(struct platform_device *pdev) +{ + struct dwc3_omap_data *pdata = pdev->dev.platform_data; + struct platform_device *dwc3; + struct dwc3_omap *omap; + struct resource *res; + + int ret = -ENOMEM; + int irq; + + u32 reg; + + void __iomem *base; + void *context; + + omap = kzalloc(sizeof(*omap), GFP_KERNEL); + if (!omap) { + dev_err(&pdev->dev, "not enough memory\n"); + goto err0; + } + + platform_set_drvdata(pdev, omap); + + irq = platform_get_irq(pdev, 1); + if (irq < 0) { + dev_err(&pdev->dev, "missing IRQ resource\n"); + ret = -EINVAL; + goto err1; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 1); + if (!res) { + dev_err(&pdev->dev, "missing memory base resource\n"); + ret = -EINVAL; + goto err1; + } + + base = ioremap_nocache(res->start, resource_size(res)); + if (!base) { + dev_err(&pdev->dev, "ioremap failed\n"); + goto err1; + } + + dwc3 = platform_device_alloc("dwc3-omap", -1); + if (!dwc3) { + dev_err(&pdev->dev, "couldn't allocate dwc3 device\n"); + goto err2; + } + + context = kzalloc(resource_size(res), GFP_KERNEL); + if (!context) { + dev_err(&pdev->dev, "couldn't allocate dwc3 context memory\n"); + goto err3; + } + + spin_lock_init(&omap->lock); + dma_set_coherent_mask(&dwc3->dev, pdev->dev.coherent_dma_mask); + + dwc3->dev.parent = &pdev->dev; + dwc3->dev.dma_mask = pdev->dev.dma_mask; + dwc3->dev.dma_parms = pdev->dev.dma_parms; + omap->resource_size = resource_size(res); + omap->context = context; + omap->dev = &pdev->dev; + omap->irq = irq; + omap->base = base; + omap->dwc3 = dwc3; + + reg = dwc3_readl(omap->base, USBOTGSS_UTMI_OTG_STATUS); + + if (!pdata) { + dev_dbg(&pdev->dev, "missing platform data\n"); + } else { + switch (pdata->utmi_mode) { + case DWC3_OMAP_UTMI_MODE_SW: + reg |= USBOTGSS_UTMI_OTG_STATUS_SW_MODE; + break; + case DWC3_OMAP_UTMI_MODE_HW: + reg &= ~USBOTGSS_UTMI_OTG_STATUS_SW_MODE; + break; + default: + dev_dbg(&pdev->dev, "UNKNOWN utmi mode %d\n", + pdata->utmi_mode); + } + } + + dwc3_writel(omap->base, USBOTGSS_UTMI_OTG_STATUS, reg); + + /* check the DMA Status */ + reg = dwc3_readl(omap->base, USBOTGSS_SYSCONFIG); + omap->dma_status = !!(reg & USBOTGSS_SYSCONFIG_DMADISABLE); + + /* Set No-Idle and No-Standby */ + reg &= ~(USBOTGSS_STANDBYMODE_MASK + | USBOTGSS_IDLEMODE_MASK); + + reg |= (USBOTGSS_SYSCONFIG_STANDBYMODE(USBOTGSS_STANDBYMODE_NO_STANDBY) + | USBOTGSS_SYSCONFIG_IDLEMODE(USBOTGSS_IDLEMODE_NO_IDLE)); + + dwc3_writel(omap->base, USBOTGSS_SYSCONFIG, reg); + + ret = request_irq(omap->irq, dwc3_omap_interrupt, 0, + "dwc3-omap", omap); + if (ret) { + dev_err(&pdev->dev, "failed to request IRQ #%d --> %d\n", + omap->irq, ret); + goto err4; + } + + /* enable all IRQs */ + reg = USBOTGSS_IRQO_COREIRQ_ST; + dwc3_writel(omap->base, USBOTGSS_IRQENABLE_SET_0, reg); + + reg = (USBOTGSS_IRQ1_OEVT | + USBOTGSS_IRQ1_DRVVBUS_RISE | + USBOTGSS_IRQ1_CHRGVBUS_RISE | + USBOTGSS_IRQ1_DISCHRGVBUS_RISE | + USBOTGSS_IRQ1_IDPULLUP_RISE | + USBOTGSS_IRQ1_DRVVBUS_FALL | + USBOTGSS_IRQ1_CHRGVBUS_FALL | + USBOTGSS_IRQ1_DISCHRGVBUS_FALL | + USBOTGSS_IRQ1_IDPULLUP_FALL); + + dwc3_writel(omap->base, USBOTGSS_IRQENABLE_SET_1, reg); + + ret = platform_device_add_resources(dwc3, pdev->resource, + pdev->num_resources); + if (ret) { + dev_err(&pdev->dev, "couldn't add resources to dwc3 device\n"); + goto err5; + } + + ret = platform_device_add(dwc3); + if (ret) { + dev_err(&pdev->dev, "failed to register dwc3 device\n"); + goto err5; + } + + return 0; + +err5: + free_irq(omap->irq, omap); + +err4: + kfree(omap->context); + +err3: + platform_device_put(dwc3); + +err2: + iounmap(base); + +err1: + kfree(omap); + +err0: + return ret; +} + +static int __devexit dwc3_omap_remove(struct platform_device *pdev) +{ + struct dwc3_omap *omap = platform_get_drvdata(pdev); + + platform_device_unregister(omap->dwc3); + + free_irq(omap->irq, omap); + iounmap(omap->base); + + kfree(omap->context); + kfree(omap); + + return 0; +} + +static const struct of_device_id of_dwc3_matach[] = { + { + "ti,dwc3", + }, + { }, +}; +MODULE_DEVICE_TABLE(of, of_dwc3_matach); + +static struct platform_driver dwc3_omap_driver = { + .probe = dwc3_omap_probe, + .remove = __devexit_p(dwc3_omap_remove), + .driver = { + .name = "omap-dwc3", + .of_match_table = of_dwc3_matach, + }, +}; + +MODULE_AUTHOR("Felipe Balbi <balbi@ti.com>"); +MODULE_LICENSE("Dual BSD/GPL"); +MODULE_DESCRIPTION("DesignWare USB3 OMAP Glue Layer"); + +static int __devinit dwc3_omap_init(void) +{ + return platform_driver_register(&dwc3_omap_driver); +} +module_init(dwc3_omap_init); + +static void __exit dwc3_omap_exit(void) +{ + platform_driver_unregister(&dwc3_omap_driver); +} +module_exit(dwc3_omap_exit); |