diff options
Diffstat (limited to 'drivers/usb/dwc3/drd.c')
| -rw-r--r-- | drivers/usb/dwc3/drd.c | 489 |
1 files changed, 471 insertions, 18 deletions
diff --git a/drivers/usb/dwc3/drd.c b/drivers/usb/dwc3/drd.c index cc8ab9a8e9d2..1d8c557e97e0 100644 --- a/drivers/usb/dwc3/drd.c +++ b/drivers/usb/dwc3/drd.c @@ -8,22 +8,423 @@ */ #include <linux/extcon.h> +#include <linux/platform_device.h> #include "debug.h" #include "core.h" #include "gadget.h" -static void dwc3_drd_update(struct dwc3 *dwc) +static void dwc3_otg_disable_events(struct dwc3 *dwc, u32 disable_mask) +{ + u32 reg = dwc3_readl(dwc->regs, DWC3_OEVTEN); + + reg &= ~(disable_mask); + dwc3_writel(dwc->regs, DWC3_OEVTEN, reg); +} + +static void dwc3_otg_enable_events(struct dwc3 *dwc, u32 enable_mask) +{ + u32 reg = dwc3_readl(dwc->regs, DWC3_OEVTEN); + + reg |= (enable_mask); + dwc3_writel(dwc->regs, DWC3_OEVTEN, reg); +} + +static void dwc3_otg_clear_events(struct dwc3 *dwc) +{ + u32 reg = dwc3_readl(dwc->regs, DWC3_OEVT); + + dwc3_writel(dwc->regs, DWC3_OEVTEN, reg); +} + +#define DWC3_OTG_ALL_EVENTS (DWC3_OEVTEN_XHCIRUNSTPSETEN | \ + DWC3_OEVTEN_DEVRUNSTPSETEN | DWC3_OEVTEN_HIBENTRYEN | \ + DWC3_OEVTEN_CONIDSTSCHNGEN | DWC3_OEVTEN_HRRCONFNOTIFEN | \ + DWC3_OEVTEN_HRRINITNOTIFEN | DWC3_OEVTEN_ADEVIDLEEN | \ + DWC3_OEVTEN_ADEVBHOSTENDEN | DWC3_OEVTEN_ADEVHOSTEN | \ + DWC3_OEVTEN_ADEVHNPCHNGEN | DWC3_OEVTEN_ADEVSRPDETEN | \ + DWC3_OEVTEN_ADEVSESSENDDETEN | DWC3_OEVTEN_BDEVBHOSTENDEN | \ + DWC3_OEVTEN_BDEVHNPCHNGEN | DWC3_OEVTEN_BDEVSESSVLDDETEN | \ + DWC3_OEVTEN_BDEVVBUSCHNGEN) + +static irqreturn_t dwc3_otg_thread_irq(int irq, void *_dwc) { + struct dwc3 *dwc = _dwc; + + spin_lock(&dwc->lock); + if (dwc->otg_restart_host) { + dwc3_otg_host_init(dwc); + dwc->otg_restart_host = 0; + } + + spin_unlock(&dwc->lock); + + dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_OTG); + + return IRQ_HANDLED; +} + +static irqreturn_t dwc3_otg_irq(int irq, void *_dwc) +{ + u32 reg; + struct dwc3 *dwc = _dwc; + irqreturn_t ret = IRQ_NONE; + + reg = dwc3_readl(dwc->regs, DWC3_OEVT); + if (reg) { + /* ignore non OTG events, we can't disable them in OEVTEN */ + if (!(reg & DWC3_OTG_ALL_EVENTS)) { + dwc3_writel(dwc->regs, DWC3_OEVT, reg); + return IRQ_NONE; + } + + if (dwc->current_otg_role == DWC3_OTG_ROLE_HOST && + !(reg & DWC3_OEVT_DEVICEMODE)) + dwc->otg_restart_host = 1; + dwc3_writel(dwc->regs, DWC3_OEVT, reg); + ret = IRQ_WAKE_THREAD; + } + + return ret; +} + +static void dwc3_otgregs_init(struct dwc3 *dwc) +{ + u32 reg; + + /* + * Prevent host/device reset from resetting OTG core. + * If we don't do this then xhci_reset (USBCMD.HCRST) will reset + * the signal outputs sent to the PHY, the OTG FSM logic of the + * core and also the resets to the VBUS filters inside the core. + */ + reg = dwc3_readl(dwc->regs, DWC3_OCFG); + reg |= DWC3_OCFG_SFTRSTMASK; + dwc3_writel(dwc->regs, DWC3_OCFG, reg); + + /* Disable hibernation for simplicity */ + reg = dwc3_readl(dwc->regs, DWC3_GCTL); + reg &= ~DWC3_GCTL_GBLHIBERNATIONEN; + dwc3_writel(dwc->regs, DWC3_GCTL, reg); + + /* + * Initialize OTG registers as per + * Figure 11-4 OTG Driver Overall Programming Flow + */ + /* OCFG.SRPCap = 0, OCFG.HNPCap = 0 */ + reg = dwc3_readl(dwc->regs, DWC3_OCFG); + reg &= ~(DWC3_OCFG_SRPCAP | DWC3_OCFG_HNPCAP); + dwc3_writel(dwc->regs, DWC3_OCFG, reg); + /* OEVT = FFFF */ + dwc3_otg_clear_events(dwc); + /* OEVTEN = 0 */ + dwc3_otg_disable_events(dwc, DWC3_OTG_ALL_EVENTS); + /* OEVTEN.ConIDStsChngEn = 1. Instead we enable all events */ + dwc3_otg_enable_events(dwc, DWC3_OTG_ALL_EVENTS); + /* + * OCTL.PeriMode = 1, OCTL.DevSetHNPEn = 0, OCTL.HstSetHNPEn = 0, + * OCTL.HNPReq = 0 + */ + reg = dwc3_readl(dwc->regs, DWC3_OCTL); + reg |= DWC3_OCTL_PERIMODE; + reg &= ~(DWC3_OCTL_DEVSETHNPEN | DWC3_OCTL_HSTSETHNPEN | + DWC3_OCTL_HNPREQ); + dwc3_writel(dwc->regs, DWC3_OCTL, reg); +} + +static int dwc3_otg_get_irq(struct dwc3 *dwc) +{ + struct platform_device *dwc3_pdev = to_platform_device(dwc->dev); + int irq; + + irq = platform_get_irq_byname(dwc3_pdev, "otg"); + if (irq > 0) + goto out; + + if (irq == -EPROBE_DEFER) + goto out; + + irq = platform_get_irq_byname(dwc3_pdev, "dwc_usb3"); + if (irq > 0) + goto out; + + if (irq == -EPROBE_DEFER) + goto out; + + irq = platform_get_irq(dwc3_pdev, 0); + if (irq > 0) + goto out; + + if (irq != -EPROBE_DEFER) + dev_err(dwc->dev, "missing OTG IRQ\n"); + + if (!irq) + irq = -EINVAL; + +out: + return irq; +} + +void dwc3_otg_init(struct dwc3 *dwc) +{ + u32 reg; + + /* + * As per Figure 11-4 OTG Driver Overall Programming Flow, + * block "Initialize GCTL for OTG operation". + */ + /* GCTL.PrtCapDir=2'b11 */ + dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_OTG); + /* GUSB2PHYCFG0.SusPHY=0 */ + reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0)); + reg &= ~DWC3_GUSB2PHYCFG_SUSPHY; + dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg); + + /* Initialize OTG registers */ + dwc3_otgregs_init(dwc); +} + +void dwc3_otg_exit(struct dwc3 *dwc) +{ + /* disable all OTG IRQs */ + dwc3_otg_disable_events(dwc, DWC3_OTG_ALL_EVENTS); + /* clear all events */ + dwc3_otg_clear_events(dwc); +} + +/* should be called before Host controller driver is started */ +void dwc3_otg_host_init(struct dwc3 *dwc) +{ + u32 reg; + + /* As per Figure 11-10 A-Device Flow Diagram */ + /* OCFG.HNPCap = 0, OCFG.SRPCap = 0. Already 0 */ + + /* + * OCTL.PeriMode=0, OCTL.TermSelDLPulse = 0, + * OCTL.DevSetHNPEn = 0, OCTL.HstSetHNPEn = 0 + */ + reg = dwc3_readl(dwc->regs, DWC3_OCTL); + reg &= ~(DWC3_OCTL_PERIMODE | DWC3_OCTL_TERMSELIDPULSE | + DWC3_OCTL_DEVSETHNPEN | DWC3_OCTL_HSTSETHNPEN); + dwc3_writel(dwc->regs, DWC3_OCTL, reg); + + /* + * OCFG.DisPrtPwrCutoff = 0/1 + */ + reg = dwc3_readl(dwc->regs, DWC3_OCFG); + reg &= ~DWC3_OCFG_DISPWRCUTTOFF; + dwc3_writel(dwc->regs, DWC3_OCFG, reg); + + /* + * OCFG.SRPCap = 1, OCFG.HNPCap = GHWPARAMS6.HNP_CAP + * We don't want SRP/HNP for simple dual-role so leave + * these disabled. + */ + + /* + * OEVTEN.OTGADevHostEvntEn = 1 + * OEVTEN.OTGADevSessEndDetEvntEn = 1 + * We don't want HNP/role-swap so leave these disabled. + */ + + /* GUSB2PHYCFG.ULPIAutoRes = 1/0, GUSB2PHYCFG.SusPHY = 1 */ + if (!dwc->dis_u2_susphy_quirk) { + reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0)); + reg |= DWC3_GUSB2PHYCFG_SUSPHY; + dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg); + } + + /* Set Port Power to enable VBUS: OCTL.PrtPwrCtl = 1 */ + reg = dwc3_readl(dwc->regs, DWC3_OCTL); + reg |= DWC3_OCTL_PRTPWRCTL; + dwc3_writel(dwc->regs, DWC3_OCTL, reg); +} + +/* should be called after Host controller driver is stopped */ +static void dwc3_otg_host_exit(struct dwc3 *dwc) +{ + u32 reg; + + /* + * Exit from A-device flow as per + * Figure 11-4 OTG Driver Overall Programming Flow + */ + + /* + * OEVTEN.OTGADevBHostEndEvntEn=0, OEVTEN.OTGADevHNPChngEvntEn=0 + * OEVTEN.OTGADevSessEndDetEvntEn=0, + * OEVTEN.OTGADevHostEvntEn = 0 + * But we don't disable any OTG events + */ + + /* OCTL.HstSetHNPEn = 0, OCTL.PrtPwrCtl=0 */ + reg = dwc3_readl(dwc->regs, DWC3_OCTL); + reg &= ~(DWC3_OCTL_HSTSETHNPEN | DWC3_OCTL_PRTPWRCTL); + dwc3_writel(dwc->regs, DWC3_OCTL, reg); +} + +/* should be called before the gadget controller driver is started */ +static void dwc3_otg_device_init(struct dwc3 *dwc) +{ + u32 reg; + + /* As per Figure 11-20 B-Device Flow Diagram */ + + /* + * OCFG.HNPCap = GHWPARAMS6.HNP_CAP, OCFG.SRPCap = 1 + * but we keep them 0 for simple dual-role operation. + */ + reg = dwc3_readl(dwc->regs, DWC3_OCFG); + /* OCFG.OTGSftRstMsk = 0/1 */ + reg |= DWC3_OCFG_SFTRSTMASK; + dwc3_writel(dwc->regs, DWC3_OCFG, reg); + /* + * OCTL.PeriMode = 1 + * OCTL.TermSelDLPulse = 0/1, OCTL.HNPReq = 0 + * OCTL.DevSetHNPEn = 0, OCTL.HstSetHNPEn = 0 + */ + reg = dwc3_readl(dwc->regs, DWC3_OCTL); + reg |= DWC3_OCTL_PERIMODE; + reg &= ~(DWC3_OCTL_TERMSELIDPULSE | DWC3_OCTL_HNPREQ | + DWC3_OCTL_DEVSETHNPEN | DWC3_OCTL_HSTSETHNPEN); + dwc3_writel(dwc->regs, DWC3_OCTL, reg); + /* OEVTEN.OTGBDevSesVldDetEvntEn = 1 */ + dwc3_otg_enable_events(dwc, DWC3_OEVTEN_BDEVSESSVLDDETEN); + /* GUSB2PHYCFG.ULPIAutoRes = 0, GUSB2PHYCFG0.SusPHY = 1 */ + if (!dwc->dis_u2_susphy_quirk) { + reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0)); + reg |= DWC3_GUSB2PHYCFG_SUSPHY; + dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg); + } + /* GCTL.GblHibernationEn = 0. Already 0. */ +} + +/* should be called after the gadget controller driver is stopped */ +static void dwc3_otg_device_exit(struct dwc3 *dwc) +{ + u32 reg; + + /* + * Exit from B-device flow as per + * Figure 11-4 OTG Driver Overall Programming Flow + */ + + /* + * OEVTEN.OTGBDevHNPChngEvntEn = 0 + * OEVTEN.OTGBDevVBusChngEvntEn = 0 + * OEVTEN.OTGBDevBHostEndEvntEn = 0 + */ + dwc3_otg_disable_events(dwc, DWC3_OEVTEN_BDEVHNPCHNGEN | + DWC3_OEVTEN_BDEVVBUSCHNGEN | + DWC3_OEVTEN_BDEVBHOSTENDEN); + + /* OCTL.DevSetHNPEn = 0, OCTL.HNPReq = 0, OCTL.PeriMode=1 */ + reg = dwc3_readl(dwc->regs, DWC3_OCTL); + reg &= ~(DWC3_OCTL_DEVSETHNPEN | DWC3_OCTL_HNPREQ); + reg |= DWC3_OCTL_PERIMODE; + dwc3_writel(dwc->regs, DWC3_OCTL, reg); +} + +void dwc3_otg_update(struct dwc3 *dwc, bool ignore_idstatus) +{ + int ret; + u32 reg; int id; + unsigned long flags; - id = extcon_get_state(dwc->edev, EXTCON_USB_HOST); - if (id < 0) - id = 0; + if (dwc->dr_mode != USB_DR_MODE_OTG) + return; - dwc3_set_mode(dwc, id ? - DWC3_GCTL_PRTCAP_HOST : - DWC3_GCTL_PRTCAP_DEVICE); + /* don't do anything if debug user changed role to not OTG */ + if (dwc->current_dr_role != DWC3_GCTL_PRTCAP_OTG) + return; + + if (!ignore_idstatus) { + reg = dwc3_readl(dwc->regs, DWC3_OSTS); + id = !!(reg & DWC3_OSTS_CONIDSTS); + + dwc->desired_otg_role = id ? DWC3_OTG_ROLE_DEVICE : + DWC3_OTG_ROLE_HOST; + } + + if (dwc->desired_otg_role == dwc->current_otg_role) + return; + + switch (dwc->current_otg_role) { + case DWC3_OTG_ROLE_HOST: + dwc3_host_exit(dwc); + spin_lock_irqsave(&dwc->lock, flags); + dwc3_otg_host_exit(dwc); + spin_unlock_irqrestore(&dwc->lock, flags); + break; + case DWC3_OTG_ROLE_DEVICE: + dwc3_gadget_exit(dwc); + spin_lock_irqsave(&dwc->lock, flags); + dwc3_event_buffers_cleanup(dwc); + dwc3_otg_device_exit(dwc); + spin_unlock_irqrestore(&dwc->lock, flags); + break; + default: + break; + } + + spin_lock_irqsave(&dwc->lock, flags); + + dwc->current_otg_role = dwc->desired_otg_role; + + spin_unlock_irqrestore(&dwc->lock, flags); + + switch (dwc->desired_otg_role) { + case DWC3_OTG_ROLE_HOST: + spin_lock_irqsave(&dwc->lock, flags); + dwc3_otgregs_init(dwc); + dwc3_otg_host_init(dwc); + spin_unlock_irqrestore(&dwc->lock, flags); + ret = dwc3_host_init(dwc); + if (ret) { + dev_err(dwc->dev, "failed to initialize host\n"); + } else { + if (dwc->usb2_phy) + otg_set_vbus(dwc->usb2_phy->otg, true); + if (dwc->usb2_generic_phy) + phy_set_mode(dwc->usb2_generic_phy, + PHY_MODE_USB_HOST); + } + break; + case DWC3_OTG_ROLE_DEVICE: + spin_lock_irqsave(&dwc->lock, flags); + dwc3_otgregs_init(dwc); + dwc3_otg_device_init(dwc); + dwc3_event_buffers_setup(dwc); + spin_unlock_irqrestore(&dwc->lock, flags); + + if (dwc->usb2_phy) + otg_set_vbus(dwc->usb2_phy->otg, false); + if (dwc->usb2_generic_phy) + phy_set_mode(dwc->usb2_generic_phy, + PHY_MODE_USB_DEVICE); + ret = dwc3_gadget_init(dwc); + if (ret) + dev_err(dwc->dev, "failed to initialize peripheral\n"); + break; + default: + break; + } +} + +static void dwc3_drd_update(struct dwc3 *dwc) +{ + int id; + + if (dwc->edev) { + id = extcon_get_state(dwc->edev, EXTCON_USB_HOST); + if (id < 0) + id = 0; + dwc3_set_mode(dwc, id ? + DWC3_GCTL_PRTCAP_HOST : + DWC3_GCTL_PRTCAP_DEVICE); + } } static int dwc3_drd_notifier(struct notifier_block *nb, @@ -40,11 +441,11 @@ static int dwc3_drd_notifier(struct notifier_block *nb, int dwc3_drd_init(struct dwc3 *dwc) { - int ret; + int ret, irq; - if (dwc->dev->of_node) { - if (of_property_read_bool(dwc->dev->of_node, "extcon")) - dwc->edev = extcon_get_edev_by_phandle(dwc->dev, 0); + if (dwc->dev->of_node && + of_property_read_bool(dwc->dev->of_node, "extcon")) { + dwc->edev = extcon_get_edev_by_phandle(dwc->dev, 0); if (IS_ERR(dwc->edev)) return PTR_ERR(dwc->edev); @@ -56,19 +457,71 @@ int dwc3_drd_init(struct dwc3 *dwc) dev_err(dwc->dev, "couldn't register cable notifier\n"); return ret; } - } - dwc3_drd_update(dwc); + dwc3_drd_update(dwc); + } else { + dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_OTG); + dwc->current_dr_role = DWC3_GCTL_PRTCAP_OTG; + + /* use OTG block to get ID event */ + irq = dwc3_otg_get_irq(dwc); + if (irq < 0) + return irq; + + dwc->otg_irq = irq; + + /* disable all OTG IRQs */ + dwc3_otg_disable_events(dwc, DWC3_OTG_ALL_EVENTS); + /* clear all events */ + dwc3_otg_clear_events(dwc); + + ret = request_threaded_irq(dwc->otg_irq, dwc3_otg_irq, + dwc3_otg_thread_irq, + IRQF_SHARED, "dwc3-otg", dwc); + if (ret) { + dev_err(dwc->dev, "failed to request irq #%d --> %d\n", + dwc->otg_irq, ret); + ret = -ENODEV; + return ret; + } + + dwc3_otg_init(dwc); + dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_OTG); + } return 0; } void dwc3_drd_exit(struct dwc3 *dwc) { - extcon_unregister_notifier(dwc->edev, EXTCON_USB_HOST, - &dwc->edev_nb); + unsigned long flags; + + if (dwc->edev) + extcon_unregister_notifier(dwc->edev, EXTCON_USB_HOST, + &dwc->edev_nb); + + cancel_work_sync(&dwc->drd_work); + + /* debug user might have changed role, clean based on current role */ + switch (dwc->current_dr_role) { + case DWC3_GCTL_PRTCAP_HOST: + dwc3_host_exit(dwc); + break; + case DWC3_GCTL_PRTCAP_DEVICE: + dwc3_gadget_exit(dwc); + dwc3_event_buffers_cleanup(dwc); + break; + case DWC3_GCTL_PRTCAP_OTG: + dwc3_otg_exit(dwc); + spin_lock_irqsave(&dwc->lock, flags); + dwc->desired_otg_role = DWC3_OTG_ROLE_IDLE; + spin_unlock_irqrestore(&dwc->lock, flags); + dwc3_otg_update(dwc, 1); + break; + default: + break; + } - dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_DEVICE); - flush_work(&dwc->drd_work); - dwc3_gadget_exit(dwc); + if (!dwc->edev) + free_irq(dwc->otg_irq, dwc); } |