diff options
Diffstat (limited to 'drivers/usb/dwc3/core.c')
| -rw-r--r-- | drivers/usb/dwc3/core.c | 39 |
1 files changed, 38 insertions, 1 deletions
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index 44ee8526dc28..d25490965b27 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -279,9 +279,46 @@ int dwc3_core_soft_reset(struct dwc3 *dwc) * XHCI driver will reset the host block. If dwc3 was configured for * host-only mode or current role is host, then we can return early. */ - if (dwc->dr_mode == USB_DR_MODE_HOST || dwc->current_dr_role == DWC3_GCTL_PRTCAP_HOST) + if (dwc->current_dr_role == DWC3_GCTL_PRTCAP_HOST) return 0; + /* + * If the dr_mode is host and the dwc->current_dr_role is not the + * corresponding DWC3_GCTL_PRTCAP_HOST, then the dwc3_core_init_mode + * isn't executed yet. Ensure the phy is ready before the controller + * updates the GCTL.PRTCAPDIR or other settings by soft-resetting + * the phy. + * + * Note: GUSB3PIPECTL[n] and GUSB2PHYCFG[n] are port settings where n + * is port index. If this is a multiport host, then we need to reset + * all active ports. + */ + if (dwc->dr_mode == USB_DR_MODE_HOST) { + u32 usb3_port; + u32 usb2_port; + + usb3_port = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0)); + usb3_port |= DWC3_GUSB3PIPECTL_PHYSOFTRST; + dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), usb3_port); + + usb2_port = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0)); + usb2_port |= DWC3_GUSB2PHYCFG_PHYSOFTRST; + dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), usb2_port); + + /* Small delay for phy reset assertion */ + usleep_range(1000, 2000); + + usb3_port &= ~DWC3_GUSB3PIPECTL_PHYSOFTRST; + dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), usb3_port); + + usb2_port &= ~DWC3_GUSB2PHYCFG_PHYSOFTRST; + dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), usb2_port); + + /* Wait for clock synchronization */ + msleep(50); + return 0; + } + reg = dwc3_readl(dwc->regs, DWC3_DCTL); reg |= DWC3_DCTL_CSFTRST; reg &= ~DWC3_DCTL_RUN_STOP; |