diff options
Diffstat (limited to 'drivers/usb/chipidea/udc.c')
| -rw-r--r-- | drivers/usb/chipidea/udc.c | 29 |
1 files changed, 27 insertions, 2 deletions
diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c index 4fe18ce3bd5a..4bfb7ac0239f 100644 --- a/drivers/usb/chipidea/udc.c +++ b/drivers/usb/chipidea/udc.c @@ -819,8 +819,8 @@ __acquires(hwep->lock) } if ((setup->bRequestType & USB_RECIP_MASK) == USB_RECIP_DEVICE) { - /* Assume that device is bus powered for now. */ - *(u16 *)req->buf = ci->remote_wakeup << 1; + *(u16 *)req->buf = (ci->remote_wakeup << 1) | + ci->gadget.is_selfpowered; } else if ((setup->bRequestType & USB_RECIP_MASK) \ == USB_RECIP_ENDPOINT) { dir = (le16_to_cpu(setup->wIndex) & USB_ENDPOINT_DIR_MASK) ? @@ -929,6 +929,13 @@ __acquires(hwep->lock) return retval; } +static int otg_a_alt_hnp_support(struct ci_hdrc *ci) +{ + dev_warn(&ci->gadget.dev, + "connect the device to an alternate port if you want HNP\n"); + return isr_setup_status_phase(ci); +} + /** * isr_setup_packet_handler: setup packet handler * @ci: UDC descriptor @@ -1061,6 +1068,10 @@ __acquires(ci->lock) ci); } break; + case USB_DEVICE_A_ALT_HNP_SUPPORT: + if (ci_otg_is_fsm_mode(ci)) + err = otg_a_alt_hnp_support(ci); + break; default: goto delegate; } @@ -1520,6 +1531,19 @@ static int ci_udc_vbus_draw(struct usb_gadget *_gadget, unsigned ma) return -ENOTSUPP; } +static int ci_udc_selfpowered(struct usb_gadget *_gadget, int is_on) +{ + struct ci_hdrc *ci = container_of(_gadget, struct ci_hdrc, gadget); + struct ci_hw_ep *hwep = ci->ep0in; + unsigned long flags; + + spin_lock_irqsave(hwep->lock, flags); + _gadget->is_selfpowered = (is_on != 0); + spin_unlock_irqrestore(hwep->lock, flags); + + return 0; +} + /* Change Data+ pullup status * this func is used by usb_gadget_connect/disconnet */ @@ -1549,6 +1573,7 @@ static int ci_udc_stop(struct usb_gadget *gadget); static const struct usb_gadget_ops usb_gadget_ops = { .vbus_session = ci_udc_vbus_session, .wakeup = ci_udc_wakeup, + .set_selfpowered = ci_udc_selfpowered, .pullup = ci_udc_pullup, .vbus_draw = ci_udc_vbus_draw, .udc_start = ci_udc_start, |