summaryrefslogtreecommitdiff
path: root/drivers/tty
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/tty')
-rw-r--r--drivers/tty/bfin_jtag_comm.c13
-rw-r--r--drivers/tty/serial/8250/8250_core.c11
-rw-r--r--drivers/tty/serial/8250/8250_dw.c47
-rw-r--r--drivers/tty/serial/8250/8250_pci.c20
-rw-r--r--drivers/tty/serial/atmel_serial.c49
-rw-r--r--drivers/tty/serial/fsl_lpuart.c5
-rw-r--r--drivers/tty/serial/of_serial.c4
-rw-r--r--drivers/tty/serial/samsung.c1
-rw-r--r--drivers/tty/serial/sprd_serial.c4
-rw-r--r--drivers/tty/tty_io.c4
-rw-r--r--drivers/tty/tty_ioctl.c16
11 files changed, 117 insertions, 57 deletions
diff --git a/drivers/tty/bfin_jtag_comm.c b/drivers/tty/bfin_jtag_comm.c
index d7b198c400c7..ce24182f8514 100644
--- a/drivers/tty/bfin_jtag_comm.c
+++ b/drivers/tty/bfin_jtag_comm.c
@@ -210,18 +210,6 @@ bfin_jc_chars_in_buffer(struct tty_struct *tty)
return circ_cnt(&bfin_jc_write_buf);
}
-static void
-bfin_jc_wait_until_sent(struct tty_struct *tty, int timeout)
-{
- unsigned long expire = jiffies + timeout;
- while (!circ_empty(&bfin_jc_write_buf)) {
- if (signal_pending(current))
- break;
- if (time_after(jiffies, expire))
- break;
- }
-}
-
static const struct tty_operations bfin_jc_ops = {
.open = bfin_jc_open,
.close = bfin_jc_close,
@@ -230,7 +218,6 @@ static const struct tty_operations bfin_jc_ops = {
.flush_chars = bfin_jc_flush_chars,
.write_room = bfin_jc_write_room,
.chars_in_buffer = bfin_jc_chars_in_buffer,
- .wait_until_sent = bfin_jc_wait_until_sent,
};
static int __init bfin_jc_init(void)
diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c
index e3b9570a1eff..deae122c9c4b 100644
--- a/drivers/tty/serial/8250/8250_core.c
+++ b/drivers/tty/serial/8250/8250_core.c
@@ -2138,8 +2138,8 @@ int serial8250_do_startup(struct uart_port *port)
/*
* Clear the interrupt registers.
*/
- if (serial_port_in(port, UART_LSR) & UART_LSR_DR)
- serial_port_in(port, UART_RX);
+ serial_port_in(port, UART_LSR);
+ serial_port_in(port, UART_RX);
serial_port_in(port, UART_IIR);
serial_port_in(port, UART_MSR);
@@ -2300,8 +2300,8 @@ dont_test_tx_en:
* saved flags to avoid getting false values from polling
* routines or the previous session.
*/
- if (serial_port_in(port, UART_LSR) & UART_LSR_DR)
- serial_port_in(port, UART_RX);
+ serial_port_in(port, UART_LSR);
+ serial_port_in(port, UART_RX);
serial_port_in(port, UART_IIR);
serial_port_in(port, UART_MSR);
up->lsr_saved_flags = 0;
@@ -2394,8 +2394,7 @@ void serial8250_do_shutdown(struct uart_port *port)
* Read data port to reset things, and then unlink from
* the IRQ chain.
*/
- if (serial_port_in(port, UART_LSR) & UART_LSR_DR)
- serial_port_in(port, UART_RX);
+ serial_port_in(port, UART_RX);
serial8250_rpm_put(up);
del_timer_sync(&up->timer);
diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c
index e60116235836..6ae5b8560e4d 100644
--- a/drivers/tty/serial/8250/8250_dw.c
+++ b/drivers/tty/serial/8250/8250_dw.c
@@ -59,6 +59,8 @@ struct dw8250_data {
u8 usr_reg;
int last_mcr;
int line;
+ int msr_mask_on;
+ int msr_mask_off;
struct clk *clk;
struct clk *pclk;
struct reset_control *rst;
@@ -81,6 +83,12 @@ static inline int dw8250_modify_msr(struct uart_port *p, int offset, int value)
value &= ~UART_MSR_DCTS;
}
+ /* Override any modem control signals if needed */
+ if (offset == UART_MSR) {
+ value |= d->msr_mask_on;
+ value &= ~d->msr_mask_off;
+ }
+
return value;
}
@@ -111,7 +119,10 @@ static void dw8250_serial_out(struct uart_port *p, int offset, int value)
dw8250_force_idle(p);
writeb(value, p->membase + (UART_LCR << p->regshift));
}
- dev_err(p->dev, "Couldn't set LCR to %d\n", value);
+ /*
+ * FIXME: this deadlocks if port->lock is already held
+ * dev_err(p->dev, "Couldn't set LCR to %d\n", value);
+ */
}
}
@@ -155,7 +166,10 @@ static void dw8250_serial_outq(struct uart_port *p, int offset, int value)
__raw_writeq(value & 0xff,
p->membase + (UART_LCR << p->regshift));
}
- dev_err(p->dev, "Couldn't set LCR to %d\n", value);
+ /*
+ * FIXME: this deadlocks if port->lock is already held
+ * dev_err(p->dev, "Couldn't set LCR to %d\n", value);
+ */
}
}
#endif /* CONFIG_64BIT */
@@ -179,7 +193,10 @@ static void dw8250_serial_out32(struct uart_port *p, int offset, int value)
dw8250_force_idle(p);
writel(value, p->membase + (UART_LCR << p->regshift));
}
- dev_err(p->dev, "Couldn't set LCR to %d\n", value);
+ /*
+ * FIXME: this deadlocks if port->lock is already held
+ * dev_err(p->dev, "Couldn't set LCR to %d\n", value);
+ */
}
}
@@ -334,6 +351,30 @@ static int dw8250_probe_of(struct uart_port *p,
if (id >= 0)
p->line = id;
+ if (of_property_read_bool(np, "dcd-override")) {
+ /* Always report DCD as active */
+ data->msr_mask_on |= UART_MSR_DCD;
+ data->msr_mask_off |= UART_MSR_DDCD;
+ }
+
+ if (of_property_read_bool(np, "dsr-override")) {
+ /* Always report DSR as active */
+ data->msr_mask_on |= UART_MSR_DSR;
+ data->msr_mask_off |= UART_MSR_DDSR;
+ }
+
+ if (of_property_read_bool(np, "cts-override")) {
+ /* Always report DSR as active */
+ data->msr_mask_on |= UART_MSR_DSR;
+ data->msr_mask_off |= UART_MSR_DDSR;
+ }
+
+ if (of_property_read_bool(np, "ri-override")) {
+ /* Always report Ring indicator as inactive */
+ data->msr_mask_off |= UART_MSR_RI;
+ data->msr_mask_off |= UART_MSR_TERI;
+ }
+
/* clock got configured through clk api, all done */
if (p->uartclk)
return 0;
diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index daf2c82984e9..892eb32cdef4 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -69,7 +69,7 @@ static void moan_device(const char *str, struct pci_dev *dev)
"Please send the output of lspci -vv, this\n"
"message (0x%04x,0x%04x,0x%04x,0x%04x), the\n"
"manufacturer and name of serial board or\n"
- "modem board to rmk+serial@arm.linux.org.uk.\n",
+ "modem board to <linux-serial@vger.kernel.org>.\n",
pci_name(dev), str, dev->vendor, dev->device,
dev->subsystem_vendor, dev->subsystem_device);
}
@@ -1989,13 +1989,6 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
},
{
.vendor = PCI_VENDOR_ID_INTEL,
- .device = PCI_DEVICE_ID_INTEL_QRK_UART,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .setup = pci_default_setup,
- },
- {
- .vendor = PCI_VENDOR_ID_INTEL,
.device = PCI_DEVICE_ID_INTEL_BSW_UART1,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
@@ -2201,13 +2194,6 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
*/
{
.vendor = PCI_VENDOR_ID_PLX,
- .device = PCI_DEVICE_ID_PLX_9030,
- .subvendor = PCI_SUBVENDOR_ID_PERLE,
- .subdevice = PCI_ANY_ID,
- .setup = pci_default_setup,
- },
- {
- .vendor = PCI_VENDOR_ID_PLX,
.device = PCI_DEVICE_ID_PLX_9050,
.subvendor = PCI_SUBVENDOR_ID_EXSYS,
.subdevice = PCI_SUBDEVICE_ID_EXSYS_4055,
@@ -5415,10 +5401,6 @@ static struct pci_device_id serial_pci_tbl[] = {
PCI_ANY_ID, PCI_ANY_ID,
0, 0, pbn_b0_bt_2_115200 },
- { PCI_VENDOR_ID_WCH, PCI_DEVICE_ID_WCH_CH352_2S,
- PCI_ANY_ID, PCI_ANY_ID,
- 0, 0, pbn_b0_bt_2_115200 },
-
{ PCIE_VENDOR_ID_WCH, PCIE_DEVICE_ID_WCH_CH384_4S,
PCI_ANY_ID, PCI_ANY_ID,
0, 0, pbn_wch384_4 },
diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index 846552bff67d..4e959c43f680 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -47,6 +47,7 @@
#include <linux/gpio/consumer.h>
#include <linux/err.h>
#include <linux/irq.h>
+#include <linux/suspend.h>
#include <asm/io.h>
#include <asm/ioctls.h>
@@ -173,6 +174,12 @@ struct atmel_uart_port {
bool ms_irq_enabled;
bool is_usart; /* usart or uart */
struct timer_list uart_timer; /* uart timer */
+
+ bool suspended;
+ unsigned int pending;
+ unsigned int pending_status;
+ spinlock_t lock_suspended;
+
int (*prepare_rx)(struct uart_port *port);
int (*prepare_tx)(struct uart_port *port);
void (*schedule_rx)(struct uart_port *port);
@@ -1179,12 +1186,15 @@ static irqreturn_t atmel_interrupt(int irq, void *dev_id)
{
struct uart_port *port = dev_id;
struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
- unsigned int status, pending, pass_counter = 0;
+ unsigned int status, pending, mask, pass_counter = 0;
bool gpio_handled = false;
+ spin_lock(&atmel_port->lock_suspended);
+
do {
status = atmel_get_lines_status(port);
- pending = status & UART_GET_IMR(port);
+ mask = UART_GET_IMR(port);
+ pending = status & mask;
if (!gpio_handled) {
/*
* Dealing with GPIO interrupt
@@ -1206,11 +1216,21 @@ static irqreturn_t atmel_interrupt(int irq, void *dev_id)
if (!pending)
break;
+ if (atmel_port->suspended) {
+ atmel_port->pending |= pending;
+ atmel_port->pending_status = status;
+ UART_PUT_IDR(port, mask);
+ pm_system_wakeup();
+ break;
+ }
+
atmel_handle_receive(port, pending);
atmel_handle_status(port, pending, status);
atmel_handle_transmit(port, pending);
} while (pass_counter++ < ATMEL_ISR_PASS_LIMIT);
+ spin_unlock(&atmel_port->lock_suspended);
+
return pass_counter ? IRQ_HANDLED : IRQ_NONE;
}
@@ -1742,7 +1762,8 @@ static int atmel_startup(struct uart_port *port)
/*
* Allocate the IRQ
*/
- retval = request_irq(port->irq, atmel_interrupt, IRQF_SHARED,
+ retval = request_irq(port->irq, atmel_interrupt,
+ IRQF_SHARED | IRQF_COND_SUSPEND,
tty ? tty->name : "atmel_serial", port);
if (retval) {
dev_err(port->dev, "atmel_startup - Can't get irq\n");
@@ -2513,8 +2534,14 @@ static int atmel_serial_suspend(struct platform_device *pdev,
/* we can not wake up if we're running on slow clock */
atmel_port->may_wakeup = device_may_wakeup(&pdev->dev);
- if (atmel_serial_clk_will_stop())
+ if (atmel_serial_clk_will_stop()) {
+ unsigned long flags;
+
+ spin_lock_irqsave(&atmel_port->lock_suspended, flags);
+ atmel_port->suspended = true;
+ spin_unlock_irqrestore(&atmel_port->lock_suspended, flags);
device_set_wakeup_enable(&pdev->dev, 0);
+ }
uart_suspend_port(&atmel_uart, port);
@@ -2525,6 +2552,18 @@ static int atmel_serial_resume(struct platform_device *pdev)
{
struct uart_port *port = platform_get_drvdata(pdev);
struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+ unsigned long flags;
+
+ spin_lock_irqsave(&atmel_port->lock_suspended, flags);
+ if (atmel_port->pending) {
+ atmel_handle_receive(port, atmel_port->pending);
+ atmel_handle_status(port, atmel_port->pending,
+ atmel_port->pending_status);
+ atmel_handle_transmit(port, atmel_port->pending);
+ atmel_port->pending = 0;
+ }
+ atmel_port->suspended = false;
+ spin_unlock_irqrestore(&atmel_port->lock_suspended, flags);
uart_resume_port(&atmel_uart, port);
device_set_wakeup_enable(&pdev->dev, atmel_port->may_wakeup);
@@ -2593,6 +2632,8 @@ static int atmel_serial_probe(struct platform_device *pdev)
port->backup_imr = 0;
port->uart.line = ret;
+ spin_lock_init(&port->lock_suspended);
+
ret = atmel_init_gpios(port, &pdev->dev);
if (ret < 0)
dev_err(&pdev->dev, "%s",
diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c
index b1893f3f88f1..3ad1458bfeb0 100644
--- a/drivers/tty/serial/fsl_lpuart.c
+++ b/drivers/tty/serial/fsl_lpuart.c
@@ -921,6 +921,9 @@ static void lpuart_setup_watermark(struct lpuart_port *sport)
writeb(val | UARTPFIFO_TXFE | UARTPFIFO_RXFE,
sport->port.membase + UARTPFIFO);
+ /* explicitly clear RDRF */
+ readb(sport->port.membase + UARTSR1);
+
/* flush Tx and Rx FIFO */
writeb(UARTCFIFO_TXFLUSH | UARTCFIFO_RXFLUSH,
sport->port.membase + UARTCFIFO);
@@ -1076,6 +1079,8 @@ static int lpuart_startup(struct uart_port *port)
sport->txfifo_size = 0x1 << (((temp >> UARTPFIFO_TXSIZE_OFF) &
UARTPFIFO_FIFOSIZE_MASK) + 1);
+ sport->port.fifosize = sport->txfifo_size;
+
sport->rxfifo_size = 0x1 << (((temp >> UARTPFIFO_RXSIZE_OFF) &
UARTPFIFO_FIFOSIZE_MASK) + 1);
diff --git a/drivers/tty/serial/of_serial.c b/drivers/tty/serial/of_serial.c
index 7ff61e24a195..33fb94f78967 100644
--- a/drivers/tty/serial/of_serial.c
+++ b/drivers/tty/serial/of_serial.c
@@ -133,10 +133,6 @@ static int of_platform_serial_setup(struct platform_device *ofdev,
if (of_find_property(np, "no-loopback-test", NULL))
port->flags |= UPF_SKIP_TEST;
- ret = of_alias_get_id(np, "serial");
- if (ret >= 0)
- port->line = ret;
-
port->dev = &ofdev->dev;
switch (type) {
diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c
index af821a908720..cf08876922f1 100644
--- a/drivers/tty/serial/samsung.c
+++ b/drivers/tty/serial/samsung.c
@@ -963,6 +963,7 @@ static void s3c24xx_serial_shutdown(struct uart_port *port)
free_irq(ourport->tx_irq, ourport);
tx_enabled(port) = 0;
ourport->tx_claimed = 0;
+ ourport->tx_mode = 0;
}
if (ourport->rx_claimed) {
diff --git a/drivers/tty/serial/sprd_serial.c b/drivers/tty/serial/sprd_serial.c
index 594b63331ef4..bca975f5093b 100644
--- a/drivers/tty/serial/sprd_serial.c
+++ b/drivers/tty/serial/sprd_serial.c
@@ -293,8 +293,10 @@ static irqreturn_t sprd_handle_irq(int irq, void *dev_id)
ims = serial_in(port, SPRD_IMSR);
- if (!ims)
+ if (!ims) {
+ spin_unlock(&port->lock);
return IRQ_NONE;
+ }
serial_out(port, SPRD_ICLR, ~0);
diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c
index 51f066aa375e..2bb4dfc02873 100644
--- a/drivers/tty/tty_io.c
+++ b/drivers/tty/tty_io.c
@@ -1028,8 +1028,8 @@ EXPORT_SYMBOL(start_tty);
/* We limit tty time update visibility to every 8 seconds or so. */
static void tty_update_time(struct timespec *time)
{
- unsigned long sec = get_seconds() & ~7;
- if ((long)(sec - time->tv_sec) > 0)
+ unsigned long sec = get_seconds();
+ if (abs(sec - time->tv_sec) & ~7)
time->tv_sec = sec;
}
diff --git a/drivers/tty/tty_ioctl.c b/drivers/tty/tty_ioctl.c
index a5cf253b2544..632fc8152061 100644
--- a/drivers/tty/tty_ioctl.c
+++ b/drivers/tty/tty_ioctl.c
@@ -217,11 +217,17 @@ void tty_wait_until_sent(struct tty_struct *tty, long timeout)
#endif
if (!timeout)
timeout = MAX_SCHEDULE_TIMEOUT;
- if (wait_event_interruptible_timeout(tty->write_wait,
- !tty_chars_in_buffer(tty), timeout) >= 0) {
- if (tty->ops->wait_until_sent)
- tty->ops->wait_until_sent(tty, timeout);
- }
+
+ timeout = wait_event_interruptible_timeout(tty->write_wait,
+ !tty_chars_in_buffer(tty), timeout);
+ if (timeout <= 0)
+ return;
+
+ if (timeout == MAX_SCHEDULE_TIMEOUT)
+ timeout = 0;
+
+ if (tty->ops->wait_until_sent)
+ tty->ops->wait_until_sent(tty, timeout);
}
EXPORT_SYMBOL(tty_wait_until_sent);
generated by cgit v1.2.3 (git 2.39.0) at 2025-01-15 15:39:56 +0300