diff options
Diffstat (limited to 'drivers/tty')
| -rw-r--r-- | drivers/tty/serial/Kconfig | 23 | ||||
| -rw-r--r-- | drivers/tty/serial/Makefile | 1 | ||||
| -rw-r--r-- | drivers/tty/serial/arc_uart.c | 746 |
3 files changed, 770 insertions, 0 deletions
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index 2a53be5f010d..b1768012ed21 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -1423,4 +1423,27 @@ config SERIAL_EFM32_UART_CONSOLE depends on SERIAL_EFM32_UART=y select SERIAL_CORE_CONSOLE +config SERIAL_ARC + tristate "ARC UART driver support" + select SERIAL_CORE + help + Driver for on-chip UART for ARC(Synopsys) for the legacy + FPGA Boards (ML50x/ARCAngel4) + +config SERIAL_ARC_CONSOLE + bool "Console on ARC UART" + depends on SERIAL_ARC=y + select SERIAL_CORE_CONSOLE + help + Enable system Console on ARC UART + +config SERIAL_ARC_NR_PORTS + int "Number of ARC UART ports" + depends on SERIAL_ARC + range 1 3 + default "1" + help + Set this to the number of serial ports you want the driver + to support. + endmenu diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile index 4f694dafa719..df1b998c436b 100644 --- a/drivers/tty/serial/Makefile +++ b/drivers/tty/serial/Makefile @@ -82,3 +82,4 @@ obj-$(CONFIG_SERIAL_XILINX_PS_UART) += xilinx_uartps.o obj-$(CONFIG_SERIAL_SIRFSOC) += sirfsoc_uart.o obj-$(CONFIG_SERIAL_AR933X) += ar933x_uart.o obj-$(CONFIG_SERIAL_EFM32_UART) += efm32-uart.o +obj-$(CONFIG_SERIAL_ARC) += arc_uart.o diff --git a/drivers/tty/serial/arc_uart.c b/drivers/tty/serial/arc_uart.c new file mode 100644 index 000000000000..e9c61d1b1c79 --- /dev/null +++ b/drivers/tty/serial/arc_uart.c @@ -0,0 +1,746 @@ +/* + * ARC On-Chip(fpga) UART Driver + * + * Copyright (C) 2010-2012 Synopsys, Inc. (www.synopsys.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * vineetg: July 10th 2012 + * -Decoupled the driver from arch/arc + * +Using platform_get_resource() for irq/membase (thx to bfin_uart.c) + * +Using early_platform_xxx() for early console (thx to mach-shmobile/xxx) + * + * Vineetg: Aug 21st 2010 + * -Is uart_tx_stopped() not done in tty write path as it has already been + * taken care of, in serial core + * + * Vineetg: Aug 18th 2010 + * -New Serial Core based ARC UART driver + * -Derived largely from blackfin driver albiet with some major tweaks + * + * TODO: + * -check if sysreq works + */ + +#if defined(CONFIG_SERIAL_ARC_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) +#define SUPPORT_SYSRQ +#endif + +#include <linux/module.h> +#include <linux/serial.h> +#include <linux/console.h> +#include <linux/sysrq.h> +#include <linux/platform_device.h> +#include <linux/tty.h> +#include <linux/tty_flip.h> +#include <linux/serial_core.h> +#include <linux/io.h> + +/************************************* + * ARC UART Hardware Specs + ************************************/ +#define ARC_UART_TX_FIFO_SIZE 1 + +/* + * UART Register set (this is not a Standards Compliant IP) + * Also each reg is Word aligned, but only 8 bits wide + */ +#define R_ID0 0 +#define R_ID1 4 +#define R_ID2 8 +#define R_ID3 12 +#define R_DATA 16 +#define R_STS 20 +#define R_BAUDL 24 +#define R_BAUDH 28 + +/* Bits for UART Status Reg (R/W) */ +#define RXIENB 0x04 /* Receive Interrupt Enable */ +#define TXIENB 0x40 /* Transmit Interrupt Enable */ + +#define RXEMPTY 0x20 /* Receive FIFO Empty: No char receivede */ +#define TXEMPTY 0x80 /* Transmit FIFO Empty, thus char can be written into */ + +#define RXFULL 0x08 /* Receive FIFO full */ +#define RXFULL1 0x10 /* Receive FIFO has space for 1 char (tot space=4) */ + +#define RXFERR 0x01 /* Frame Error: Stop Bit not detected */ +#define RXOERR 0x02 /* OverFlow Err: Char recv but RXFULL still set */ + +/* Uart bit fiddling helpers: lowest level */ +#define RBASE(uart, reg) (uart->port.membase + reg) +#define UART_REG_SET(u, r, v) writeb((v), RBASE(u, r)) +#define UART_REG_GET(u, r) readb(RBASE(u, r)) + +#define UART_REG_OR(u, r, v) UART_REG_SET(u, r, UART_REG_GET(u, r) | (v)) +#define UART_REG_CLR(u, r, v) UART_REG_SET(u, r, UART_REG_GET(u, r) & ~(v)) + +/* Uart bit fiddling helpers: API level */ +#define UART_SET_DATA(uart, val) UART_REG_SET(uart, R_DATA, val) +#define UART_GET_DATA(uart) UART_REG_GET(uart, R_DATA) + +#define UART_SET_BAUDH(uart, val) UART_REG_SET(uart, R_BAUDH, val) +#define UART_SET_BAUDL(uart, val) UART_REG_SET(uart, R_BAUDL, val) + +#define UART_CLR_STATUS(uart, val) UART_REG_CLR(uart, R_STS, val) +#define UART_GET_STATUS(uart) UART_REG_GET(uart, R_STS) + +#define UART_ALL_IRQ_DISABLE(uart) UART_REG_CLR(uart, R_STS, RXIENB|TXIENB) +#define UART_RX_IRQ_DISABLE(uart) UART_REG_CLR(uart, R_STS, RXIENB) +#define UART_TX_IRQ_DISABLE(uart) UART_REG_CLR(uart, R_STS, TXIENB) + +#define UART_ALL_IRQ_ENABLE(uart) UART_REG_OR(uart, R_STS, RXIENB|TXIENB) +#define UART_RX_IRQ_ENABLE(uart) UART_REG_OR(uart, R_STS, RXIENB) +#define UART_TX_IRQ_ENABLE(uart) UART_REG_OR(uart, R_STS, TXIENB) + +#define ARC_SERIAL_DEV_NAME "ttyARC" + +struct arc_uart_port { + struct uart_port port; + unsigned long baud; + int is_emulated; /* H/w vs. Instruction Set Simulator */ +}; + +#define to_arc_port(uport) container_of(uport, struct arc_uart_port, port) + +static struct arc_uart_port arc_uart_ports[CONFIG_SERIAL_ARC_NR_PORTS]; + +#ifdef CONFIG_SERIAL_ARC_CONSOLE +static struct console arc_console; +#endif + +#define DRIVER_NAME "arc-uart" + +static struct uart_driver arc_uart_driver = { + .owner = THIS_MODULE, + .driver_name = DRIVER_NAME, + .dev_name = ARC_SERIAL_DEV_NAME, + .major = 0, + .minor = 0, + .nr = CONFIG_SERIAL_ARC_NR_PORTS, +#ifdef CONFIG_SERIAL_ARC_CONSOLE + .cons = &arc_console, +#endif +}; + +static void arc_serial_stop_rx(struct uart_port *port) +{ + struct arc_uart_port *uart = to_arc_port(port); + + UART_RX_IRQ_DISABLE(uart); +} + +static void arc_serial_stop_tx(struct uart_port *port) +{ + struct arc_uart_port *uart = to_arc_port(port); + + while (!(UART_GET_STATUS(uart) & TXEMPTY)) + cpu_relax(); + + UART_TX_IRQ_DISABLE(uart); +} + +/* + * Return TIOCSER_TEMT when transmitter is not busy. + */ +static unsigned int arc_serial_tx_empty(struct uart_port *port) +{ + struct arc_uart_port *uart = to_arc_port(port); + unsigned int stat; + + stat = UART_GET_STATUS(uart); + if (stat & TXEMPTY) + return TIOCSER_TEMT; + + return 0; +} + +/* + * Driver internal routine, used by both tty(serial core) as well as tx-isr + * -Called under spinlock in either cases + * -also tty->stopped / tty->hw_stopped has already been checked + * = by uart_start( ) before calling us + * = tx_ist checks that too before calling + */ +static void arc_serial_tx_chars(struct arc_uart_port *uart) +{ + struct circ_buf *xmit = &uart->port.state->xmit; + int sent = 0; + unsigned char ch; + + if (unlikely(uart->port.x_char)) { + UART_SET_DATA(uart, uart->port.x_char); + uart->port.icount.tx++; + uart->port.x_char = 0; + sent = 1; + } else if (xmit->tail != xmit->head) { /* TODO: uart_circ_empty */ + ch = xmit->buf[xmit->tail]; + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + uart->port.icount.tx++; + while (!(UART_GET_STATUS(uart) & TXEMPTY)) + cpu_relax(); + UART_SET_DATA(uart, ch); + sent = 1; + } + + /* + * If num chars in xmit buffer are too few, ask tty layer for more. + * By Hard ISR to schedule processing in software interrupt part + */ + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&uart->port); + + if (sent) + UART_TX_IRQ_ENABLE(uart); +} + +/* + * port is locked and interrupts are disabled + * uart_start( ) calls us under the port spinlock irqsave + */ +static void arc_serial_start_tx(struct uart_port *port) +{ + struct arc_uart_port *uart = to_arc_port(port); + + arc_serial_tx_chars(uart); +} + +static void arc_serial_rx_chars(struct arc_uart_port *uart) +{ + struct tty_struct *tty = tty_port_tty_get(&uart->port.state->port); + unsigned int status, ch, flg = 0; + + if (!tty) + return; + + /* + * UART has 4 deep RX-FIFO. Driver's recongnition of this fact + * is very subtle. Here's how ... + * Upon getting a RX-Intr, such that RX-EMPTY=0, meaning data available, + * driver reads the DATA Reg and keeps doing that in a loop, until + * RX-EMPTY=1. Multiple chars being avail, with a single Interrupt, + * before RX-EMPTY=0, implies some sort of buffering going on in the + * controller, which is indeed the Rx-FIFO. + */ + while (!((status = UART_GET_STATUS(uart)) & RXEMPTY)) { + + ch = UART_GET_DATA(uart); + uart->port.icount.rx++; + + if (unlikely(status & (RXOERR | RXFERR))) { + if (status & RXOERR) { + uart->port.icount.overrun++; + flg = TTY_OVERRUN; + UART_CLR_STATUS(uart, RXOERR); + } + + if (status & RXFERR) { + uart->port.icount.frame++; + flg = TTY_FRAME; + UART_CLR_STATUS(uart, RXFERR); + } + } else + flg = TTY_NORMAL; + + if (unlikely(uart_handle_sysrq_char(&uart->port, ch))) + goto done; + + uart_insert_char(&uart->port, status, RXOERR, ch, flg); + +done: + tty_flip_buffer_push(tty); + } + + tty_kref_put(tty); +} + +/* + * A note on the Interrupt handling state machine of this driver + * + * kernel printk writes funnel thru the console driver framework and in order + * to keep things simple as well as efficient, it writes to UART in polled + * mode, in one shot, and exits. + * + * OTOH, Userland output (via tty layer), uses interrupt based writes as there + * can be undeterministic delay between char writes. + * + * Thus Rx-interrupts are always enabled, while tx-interrupts are by default + * disabled. + * + * When tty has some data to send out, serial core calls driver's start_tx + * which + * -checks-if-tty-buffer-has-char-to-send + * -writes-data-to-uart + * -enable-tx-intr + * + * Once data bits are pushed out, controller raises the Tx-room-avail-Interrupt. + * The first thing Tx ISR does is disable further Tx interrupts (as this could + * be the last char to send, before settling down into the quiet polled mode). + * It then calls the exact routine used by tty layer write to send out any + * more char in tty buffer. In case of sending, it re-enables Tx-intr. In case + * of no data, it remains disabled. + * This is how the transmit state machine is dynamically switched on/off + */ + +static irqreturn_t arc_serial_isr(int irq, void *dev_id) +{ + struct arc_uart_port *uart = dev_id; + unsigned int status; + + status = UART_GET_STATUS(uart); + + /* + * Single IRQ for both Rx (data available) Tx (room available) Interrupt + * notifications from the UART Controller. + * To demultiplex between the two, we check the relevant bits + */ + if ((status & RXIENB) && !(status & RXEMPTY)) { + + /* already in ISR, no need of xx_irqsave */ + spin_lock(&uart->port.lock); + arc_serial_rx_chars(uart); + spin_unlock(&uart->port.lock); + } + + if ((status & TXIENB) && (status & TXEMPTY)) { + + /* Unconditionally disable further Tx-Interrupts. + * will be enabled by tx_chars() if needed. + */ + UART_TX_IRQ_DISABLE(uart); + + spin_lock(&uart->port.lock); + + if (!uart_tx_stopped(&uart->port)) + arc_serial_tx_chars(uart); + + spin_unlock(&uart->port.lock); + } + + return IRQ_HANDLED; +} + +static unsigned int arc_serial_get_mctrl(struct uart_port *port) +{ + /* + * Pretend we have a Modem status reg and following bits are + * always set, to satify the serial core state machine + * (DSR) Data Set Ready + * (CTS) Clear To Send + * (CAR) Carrier Detect + */ + return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR; +} + +static void arc_serial_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + /* MCR not present */ +} + +/* Enable Modem Status Interrupts */ + +static void arc_serial_enable_ms(struct uart_port *port) +{ + /* MSR not present */ +} + +static void arc_serial_break_ctl(struct uart_port *port, int break_state) +{ + /* ARC UART doesn't support sending Break signal */ +} + +static int arc_serial_startup(struct uart_port *port) +{ + struct arc_uart_port *uart = to_arc_port(port); + + /* Before we hook up the ISR, Disable all UART Interrupts */ + UART_ALL_IRQ_DISABLE(uart); + + if (request_irq(uart->port.irq, arc_serial_isr, 0, "arc uart rx-tx", + uart)) { + dev_warn(uart->port.dev, "Unable to attach ARC UART intr\n"); + return -EBUSY; + } + + UART_RX_IRQ_ENABLE(uart); /* Only Rx IRQ enabled to begin with */ + + return 0; +} + +/* This is not really needed */ +static void arc_serial_shutdown(struct uart_port *port) +{ + struct arc_uart_port *uart = to_arc_port(port); + free_irq(uart->port.irq, uart); +} + +static void +arc_serial_set_termios(struct uart_port *port, struct ktermios *new, + struct ktermios *old) +{ + struct arc_uart_port *uart = to_arc_port(port); + unsigned int baud, uartl, uarth, hw_val; + unsigned long flags; + + /* + * Use the generic handler so that any specially encoded baud rates + * such as SPD_xx flags or "%B0" can be handled + * Max Baud I suppose will not be more than current 115K * 4 + * Formula for ARC UART is: hw-val = ((CLK/(BAUD*4)) -1) + * spread over two 8-bit registers + */ + baud = uart_get_baud_rate(port, new, old, 0, 460800); + + hw_val = port->uartclk / (uart->baud * 4) - 1; + uartl = hw_val & 0xFF; + uarth = (hw_val >> 8) & 0xFF; + + /* + * UART ISS(Instruction Set simulator) emulation has a subtle bug: + * A existing value of Baudh = 0 is used as a indication to startup + * it's internal state machine. + * Thus if baudh is set to 0, 2 times, it chokes. + * This happens with BAUD=115200 and the formaula above + * Until that is fixed, when running on ISS, we will set baudh to !0 + */ + if (uart->is_emulated) + uarth = 1; + + spin_lock_irqsave(&port->lock, flags); + + UART_ALL_IRQ_DISABLE(uart); + + UART_SET_BAUDL(uart, uartl); + UART_SET_BAUDH(uart, uarth); + + UART_RX_IRQ_ENABLE(uart); + + /* + * UART doesn't support Parity/Hardware Flow Control; + * Only supports 8N1 character size + */ + new->c_cflag &= ~(CMSPAR|CRTSCTS|CSIZE); + new->c_cflag |= CS8; + + if (old) + tty_termios_copy_hw(new, old); + + /* Don't rewrite B0 */ + if (tty_termios_baud_rate(new)) + tty_termios_encode_baud_rate(new, baud, baud); + + uart_update_timeout(port, new->c_cflag, baud); + + spin_unlock_irqrestore(&port->lock, flags); +} + +static const char *arc_serial_type(struct uart_port *port) +{ + struct arc_uart_port *uart = to_arc_port(port); + + return uart->port.type == PORT_ARC ? DRIVER_NAME : NULL; +} + +static void arc_serial_release_port(struct uart_port *port) +{ +} + +static int arc_serial_request_port(struct uart_port *port) +{ + return 0; +} + +/* + * Verify the new serial_struct (for TIOCSSERIAL). + */ +static int +arc_serial_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + if (port->type != PORT_UNKNOWN && ser->type != PORT_ARC) + return -EINVAL; + + return 0; +} + +/* + * Configure/autoconfigure the port. + */ +static void arc_serial_config_port(struct uart_port *port, int flags) +{ + struct arc_uart_port *uart = to_arc_port(port); + + if (flags & UART_CONFIG_TYPE) + uart->port.type = PORT_ARC; +} + +#if defined(CONFIG_CONSOLE_POLL) || defined(CONFIG_SERIAL_ARC_CONSOLE) + +static void arc_serial_poll_putchar(struct uart_port *port, unsigned char chr) +{ + struct arc_uart_port *uart = to_arc_port(port); + + while (!(UART_GET_STATUS(uart) & TXEMPTY)) + cpu_relax(); + + UART_SET_DATA(uart, chr); +} +#endif + +#ifdef CONFIG_CONSOLE_POLL +static int arc_serial_poll_getchar(struct uart_port *port) +{ + struct arc_uart_port *uart = to_arc_port(port); + unsigned char chr; + + while (!(UART_GET_STATUS(uart) & RXEMPTY)) + cpu_relax(); + + chr = UART_GET_DATA(uart); + return chr; +} +#endif + +static struct uart_ops arc_serial_pops = { + .tx_empty = arc_serial_tx_empty, + .set_mctrl = arc_serial_set_mctrl, + .get_mctrl = arc_serial_get_mctrl, + .stop_tx = arc_serial_stop_tx, + .start_tx = arc_serial_start_tx, + .stop_rx = arc_serial_stop_rx, + .enable_ms = arc_serial_enable_ms, + .break_ctl = arc_serial_break_ctl, + .startup = arc_serial_startup, + .shutdown = arc_serial_shutdown, + .set_termios = arc_serial_set_termios, + .type = arc_serial_type, + .release_port = arc_serial_release_port, + .request_port = arc_serial_request_port, + .config_port = arc_serial_config_port, + .verify_port = arc_serial_verify_port, +#ifdef CONFIG_CONSOLE_POLL + .poll_put_char = arc_serial_poll_putchar, + .poll_get_char = arc_serial_poll_getchar, +#endif +}; + +static int __devinit +arc_uart_init_one(struct platform_device *pdev, struct arc_uart_port *uart) +{ + struct resource *res, *res2; + unsigned long *plat_data; + + if (pdev->id < 0 || pdev->id >= CONFIG_SERIAL_ARC_NR_PORTS) { + dev_err(&pdev->dev, "Wrong uart platform device id.\n"); + return -ENOENT; + } + + plat_data = ((unsigned long *)(pdev->dev.platform_data)); + uart->baud = plat_data[0]; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) + return -ENODEV; + + res2 = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (!res2) + return -ENODEV; + + uart->port.mapbase = res->start; + uart->port.membase = ioremap_nocache(res->start, resource_size(res)); + if (!uart->port.membase) + /* No point of dev_err since UART itself is hosed here */ + return -ENXIO; + + uart->port.irq = res2->start; + uart->port.dev = &pdev->dev; + uart->port.iotype = UPIO_MEM; + uart->port.flags = UPF_BOOT_AUTOCONF; + uart->port.line = pdev->id; + uart->port.ops = &arc_serial_pops; + + uart->port.uartclk = plat_data[1]; + uart->port.fifosize = ARC_UART_TX_FIFO_SIZE; + + /* + * uart_insert_char( ) uses it in decideding whether to ignore a + * char or not. Explicitly setting it here, removes the subtelty + */ + uart->port.ignore_status_mask = 0; + + /* Real Hardware vs. emulated to work around a bug */ + uart->is_emulated = !!plat_data[2]; + + return 0; +} + +#ifdef CONFIG_SERIAL_ARC_CONSOLE + +static int __devinit arc_serial_console_setup(struct console *co, char *options) +{ + struct uart_port *port; + int baud = 115200; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + if (co->index < 0 || co->index >= CONFIG_SERIAL_ARC_NR_PORTS) + return -ENODEV; + + /* + * The uart port backing the console (e.g. ttyARC1) might not have been + * init yet. If so, defer the console setup to after the port. + */ + port = &arc_uart_ports[co->index].port; + if (!port->membase) + return -ENODEV; + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + + /* + * Serial core will call port->ops->set_termios( ) + * which will set the baud reg + */ + return uart_set_options(port, co, baud, parity, bits, flow); +} + +static void arc_serial_console_putchar(struct uart_port *port, int ch) +{ + arc_serial_poll_putchar(port, (unsigned char)ch); +} + +/* + * Interrupts are disabled on entering + */ +static void arc_serial_console_write(struct console *co, const char *s, + unsigned int count) +{ + struct uart_port *port = &arc_uart_ports[co->index].port; + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + uart_console_write(port, s, count, arc_serial_console_putchar); + spin_unlock_irqrestore(&port->lock, flags); +} + +static struct console arc_console = { + .name = ARC_SERIAL_DEV_NAME, + .write = arc_serial_console_write, + .device = uart_console_device, + .setup = arc_serial_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &arc_uart_driver +}; + +static __init void early_serial_write(struct console *con, const char *s, + unsigned int n) +{ + struct uart_port *port = &arc_uart_ports[con->index].port; + unsigned int i; + + for (i = 0; i < n; i++, s++) { + if (*s == '\n') + arc_serial_poll_putchar(port, '\r'); + arc_serial_poll_putchar(port, *s); + } +} + +static struct __initdata console arc_early_serial_console = { + .name = "early_ARCuart", + .write = early_serial_write, + .flags = CON_PRINTBUFFER | CON_BOOT, + .index = -1 +}; + +static int __devinit arc_serial_probe_earlyprintk(struct platform_device *pdev) +{ + arc_early_serial_console.index = pdev->id; + + arc_uart_init_one(pdev, &arc_uart_ports[pdev->id]); + + arc_serial_console_setup(&arc_early_serial_console, NULL); + + register_console(&arc_early_serial_console); + return 0; +} +#else +static int __devinit arc_serial_probe_earlyprintk(struct platform_device *pdev) +{ + return -ENODEV; +} +#endif /* CONFIG_SERIAL_ARC_CONSOLE */ + +static int __devinit arc_serial_probe(struct platform_device *pdev) +{ + struct arc_uart_port *uart; + int rc; + + if (is_early_platform_device(pdev)) + return arc_serial_probe_earlyprintk(pdev); + + uart = &arc_uart_ports[pdev->id]; + rc = arc_uart_init_one(pdev, uart); + if (rc) + return rc; + + return uart_add_one_port(&arc_uart_driver, &uart->port); +} + +static int __devexit arc_serial_remove(struct platform_device *pdev) +{ + /* This will never be called */ + return 0; +} + +static struct platform_driver arc_platform_driver = { + .probe = arc_serial_probe, + .remove = __devexit_p(arc_serial_remove), + .driver = { + .name = DRIVER_NAME, + .owner = THIS_MODULE, + }, +}; + +#ifdef CONFIG_SERIAL_ARC_CONSOLE +/* + * Register an early platform driver of "earlyprintk" class. + * ARCH platform code installs the driver and probes the early devices + * The installation could rely on user specifying earlyprintk=xyx in cmd line + * or it could be done independently, for all "earlyprintk" class drivers. + * [see arch/arc/plat-arcfpga/platform.c] + */ +early_platform_init("earlyprintk", &arc_platform_driver); + +#endif /* CONFIG_SERIAL_ARC_CONSOLE */ + +static int __init arc_serial_init(void) +{ + int ret; + + ret = uart_register_driver(&arc_uart_driver); + if (ret) + return ret; + + ret = platform_driver_register(&arc_platform_driver); + if (ret) + uart_unregister_driver(&arc_uart_driver); + + return ret; +} + +static void __exit arc_serial_exit(void) +{ + platform_driver_unregister(&arc_platform_driver); + uart_unregister_driver(&arc_uart_driver); +} + +module_init(arc_serial_init); +module_exit(arc_serial_exit); + +MODULE_LICENSE("GPL"); +MODULE_ALIAS("plat-arcfpga/uart"); +MODULE_AUTHOR("Vineet Gupta"); +MODULE_DESCRIPTION("ARC(Synopsys) On-Chip(fpga) serial driver"); |