summaryrefslogtreecommitdiff
path: root/drivers/tty
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/tty')
-rw-r--r--drivers/tty/goldfish.c20
-rw-r--r--drivers/tty/n_gsm.c495
-rw-r--r--drivers/tty/serial/8250/8250.h1
-rw-r--r--drivers/tty/serial/8250/8250_mtk.c29
-rw-r--r--drivers/tty/serial/8250/8250_pci.c8
-rw-r--r--drivers/tty/serial/8250/8250_port.c6
-rw-r--r--drivers/tty/serial/Kconfig5
-rw-r--r--drivers/tty/serial/amba-pl011.c9
-rw-r--r--drivers/tty/serial/digicolor-usart.c5
-rw-r--r--drivers/tty/serial/fsl_lpuart.c18
-rw-r--r--drivers/tty/serial/imx.c4
-rw-r--r--drivers/tty/serial/sc16is7xx.c6
-rw-r--r--drivers/tty/sysrq.c2
-rw-r--r--drivers/tty/tty_buffer.c3
14 files changed, 353 insertions, 258 deletions
diff --git a/drivers/tty/goldfish.c b/drivers/tty/goldfish.c
index ad13532e92fe..9e8ccb8ed6d6 100644
--- a/drivers/tty/goldfish.c
+++ b/drivers/tty/goldfish.c
@@ -61,13 +61,13 @@ static void do_rw_io(struct goldfish_tty *qtty,
spin_lock_irqsave(&qtty->lock, irq_flags);
gf_write_ptr((void *)address, base + GOLDFISH_TTY_REG_DATA_PTR,
base + GOLDFISH_TTY_REG_DATA_PTR_HIGH);
- __raw_writel(count, base + GOLDFISH_TTY_REG_DATA_LEN);
+ gf_iowrite32(count, base + GOLDFISH_TTY_REG_DATA_LEN);
if (is_write)
- __raw_writel(GOLDFISH_TTY_CMD_WRITE_BUFFER,
+ gf_iowrite32(GOLDFISH_TTY_CMD_WRITE_BUFFER,
base + GOLDFISH_TTY_REG_CMD);
else
- __raw_writel(GOLDFISH_TTY_CMD_READ_BUFFER,
+ gf_iowrite32(GOLDFISH_TTY_CMD_READ_BUFFER,
base + GOLDFISH_TTY_REG_CMD);
spin_unlock_irqrestore(&qtty->lock, irq_flags);
@@ -142,7 +142,7 @@ static irqreturn_t goldfish_tty_interrupt(int irq, void *dev_id)
unsigned char *buf;
u32 count;
- count = __raw_readl(base + GOLDFISH_TTY_REG_BYTES_READY);
+ count = gf_ioread32(base + GOLDFISH_TTY_REG_BYTES_READY);
if (count == 0)
return IRQ_NONE;
@@ -159,7 +159,7 @@ static int goldfish_tty_activate(struct tty_port *port, struct tty_struct *tty)
{
struct goldfish_tty *qtty = container_of(port, struct goldfish_tty,
port);
- __raw_writel(GOLDFISH_TTY_CMD_INT_ENABLE, qtty->base + GOLDFISH_TTY_REG_CMD);
+ gf_iowrite32(GOLDFISH_TTY_CMD_INT_ENABLE, qtty->base + GOLDFISH_TTY_REG_CMD);
return 0;
}
@@ -167,7 +167,7 @@ static void goldfish_tty_shutdown(struct tty_port *port)
{
struct goldfish_tty *qtty = container_of(port, struct goldfish_tty,
port);
- __raw_writel(GOLDFISH_TTY_CMD_INT_DISABLE, qtty->base + GOLDFISH_TTY_REG_CMD);
+ gf_iowrite32(GOLDFISH_TTY_CMD_INT_DISABLE, qtty->base + GOLDFISH_TTY_REG_CMD);
}
static int goldfish_tty_open(struct tty_struct *tty, struct file *filp)
@@ -202,7 +202,7 @@ static unsigned int goldfish_tty_chars_in_buffer(struct tty_struct *tty)
{
struct goldfish_tty *qtty = &goldfish_ttys[tty->index];
void __iomem *base = qtty->base;
- return __raw_readl(base + GOLDFISH_TTY_REG_BYTES_READY);
+ return gf_ioread32(base + GOLDFISH_TTY_REG_BYTES_READY);
}
static void goldfish_tty_console_write(struct console *co, const char *b,
@@ -355,7 +355,7 @@ static int goldfish_tty_probe(struct platform_device *pdev)
* on Ranchu emulator (qemu2) returns 1 here and
* driver will use physical addresses.
*/
- qtty->version = __raw_readl(base + GOLDFISH_TTY_REG_VERSION);
+ qtty->version = gf_ioread32(base + GOLDFISH_TTY_REG_VERSION);
/*
* Goldfish TTY device on Ranchu emulator (qemu2)
@@ -374,7 +374,7 @@ static int goldfish_tty_probe(struct platform_device *pdev)
}
}
- __raw_writel(GOLDFISH_TTY_CMD_INT_DISABLE, base + GOLDFISH_TTY_REG_CMD);
+ gf_iowrite32(GOLDFISH_TTY_CMD_INT_DISABLE, base + GOLDFISH_TTY_REG_CMD);
ret = request_irq(irq, goldfish_tty_interrupt, IRQF_SHARED,
"goldfish_tty", qtty);
@@ -436,7 +436,7 @@ static int goldfish_tty_remove(struct platform_device *pdev)
#ifdef CONFIG_GOLDFISH_TTY_EARLY_CONSOLE
static void gf_early_console_putchar(struct uart_port *port, unsigned char ch)
{
- __raw_writel(ch, port->membase);
+ gf_iowrite32(ch, port->membase);
}
static void gf_early_write(struct console *con, const char *s, unsigned int n)
diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c
index fa92f727fdf8..fd8b86dde525 100644
--- a/drivers/tty/n_gsm.c
+++ b/drivers/tty/n_gsm.c
@@ -73,6 +73,8 @@ module_param(debug, int, 0600);
*/
#define MAX_MRU 1500
#define MAX_MTU 1500
+/* SOF, ADDR, CTRL, LEN1, LEN2, ..., FCS, EOF */
+#define PROT_OVERHEAD 7
#define GSM_NET_TX_TIMEOUT (HZ*10)
/*
@@ -135,6 +137,7 @@ struct gsm_dlci {
int retries;
/* Uplink tty if active */
struct tty_port port; /* The tty bound to this DLCI if there is one */
+#define TX_SIZE 4096 /* Must be power of 2. */
struct kfifo fifo; /* Queue fifo for the DLCI */
int adaption; /* Adaption layer in use */
int prev_adaption;
@@ -219,7 +222,6 @@ struct gsm_mux {
int encoding;
u8 control;
u8 fcs;
- u8 received_fcs;
u8 *txframe; /* TX framing buffer */
/* Method for the receiver side */
@@ -231,6 +233,7 @@ struct gsm_mux {
int initiator; /* Did we initiate connection */
bool dead; /* Has the mux been shut down */
struct gsm_dlci *dlci[NUM_DLCI];
+ int old_c_iflag; /* termios c_iflag value before attach */
bool constipated; /* Asked by remote to shut up */
spinlock_t tx_lock;
@@ -271,10 +274,6 @@ static DEFINE_SPINLOCK(gsm_mux_lock);
static struct tty_driver *gsm_tty_driver;
-/* Save dlci open address */
-static int addr_open[256] = { 0 };
-/* Save dlci open count */
-static int addr_cnt;
/*
* This section of the driver logic implements the GSM encodings
* both the basic and the 'advanced'. Reliable transport is not
@@ -369,6 +368,7 @@ static const u8 gsm_fcs8[256] = {
#define GOOD_FCS 0xCF
static int gsmld_output(struct gsm_mux *gsm, u8 *data, int len);
+static int gsm_modem_update(struct gsm_dlci *dlci, u8 brk);
/**
* gsm_fcs_add - update FCS
@@ -832,7 +832,7 @@ static int gsm_dlci_data_output(struct gsm_mux *gsm, struct gsm_dlci *dlci)
break;
case 2: /* Unstructed with modem bits.
Always one byte as we never send inline break data */
- *dp++ = gsm_encode_modem(dlci);
+ *dp++ = (gsm_encode_modem(dlci) << 1) | EA;
break;
}
WARN_ON(kfifo_out_locked(&dlci->fifo, dp , len, &dlci->lock) != len);
@@ -917,6 +917,66 @@ static int gsm_dlci_data_output_framed(struct gsm_mux *gsm,
}
/**
+ * gsm_dlci_modem_output - try and push modem status out of a DLCI
+ * @gsm: mux
+ * @dlci: the DLCI to pull modem status from
+ * @brk: break signal
+ *
+ * Push an empty frame in to the transmit queue to update the modem status
+ * bits and to transmit an optional break.
+ *
+ * Caller must hold the tx_lock of the mux.
+ */
+
+static int gsm_dlci_modem_output(struct gsm_mux *gsm, struct gsm_dlci *dlci,
+ u8 brk)
+{
+ u8 *dp = NULL;
+ struct gsm_msg *msg;
+ int size = 0;
+
+ /* for modem bits without break data */
+ switch (dlci->adaption) {
+ case 1: /* Unstructured */
+ break;
+ case 2: /* Unstructured with modem bits. */
+ size++;
+ if (brk > 0)
+ size++;
+ break;
+ default:
+ pr_err("%s: unsupported adaption %d\n", __func__,
+ dlci->adaption);
+ return -EINVAL;
+ }
+
+ msg = gsm_data_alloc(gsm, dlci->addr, size, gsm->ftype);
+ if (!msg) {
+ pr_err("%s: gsm_data_alloc error", __func__);
+ return -ENOMEM;
+ }
+ dp = msg->data;
+ switch (dlci->adaption) {
+ case 1: /* Unstructured */
+ break;
+ case 2: /* Unstructured with modem bits. */
+ if (brk == 0) {
+ *dp++ = (gsm_encode_modem(dlci) << 1) | EA;
+ } else {
+ *dp++ = gsm_encode_modem(dlci) << 1;
+ *dp++ = (brk << 4) | 2 | EA; /* Length, Break, EA */
+ }
+ break;
+ default:
+ /* Handled above */
+ break;
+ }
+
+ __gsm_data_queue(dlci, msg);
+ return size;
+}
+
+/**
* gsm_dlci_data_sweep - look for data to send
* @gsm: the GSM mux
*
@@ -1093,7 +1153,6 @@ static void gsm_control_modem(struct gsm_mux *gsm, const u8 *data, int clen)
{
unsigned int addr = 0;
unsigned int modem = 0;
- unsigned int brk = 0;
struct gsm_dlci *dlci;
int len = clen;
int slen;
@@ -1123,17 +1182,8 @@ static void gsm_control_modem(struct gsm_mux *gsm, const u8 *data, int clen)
return;
}
len--;
- if (len > 0) {
- while (gsm_read_ea(&brk, *dp++) == 0) {
- len--;
- if (len == 0)
- return;
- }
- modem <<= 7;
- modem |= (brk & 0x7f);
- }
tty = tty_port_tty_get(&dlci->port);
- gsm_process_modem(tty, dlci, modem, slen);
+ gsm_process_modem(tty, dlci, modem, slen - len);
if (tty) {
tty_wakeup(tty);
tty_kref_put(tty);
@@ -1193,7 +1243,6 @@ static void gsm_control_rls(struct gsm_mux *gsm, const u8 *data, int clen)
}
static void gsm_dlci_begin_close(struct gsm_dlci *dlci);
-static void gsm_dlci_close(struct gsm_dlci *dlci);
/**
* gsm_control_message - DLCI 0 control processing
@@ -1212,28 +1261,15 @@ static void gsm_control_message(struct gsm_mux *gsm, unsigned int command,
{
u8 buf[1];
unsigned long flags;
- struct gsm_dlci *dlci;
- int i;
- int address;
switch (command) {
case CMD_CLD: {
- if (addr_cnt > 0) {
- for (i = 0; i < addr_cnt; i++) {
- address = addr_open[i];
- dlci = gsm->dlci[address];
- gsm_dlci_close(dlci);
- addr_open[i] = 0;
- }
- }
+ struct gsm_dlci *dlci = gsm->dlci[0];
/* Modem wishes to close down */
- dlci = gsm->dlci[0];
if (dlci) {
dlci->dead = true;
gsm->dead = true;
- gsm_dlci_close(dlci);
- addr_cnt = 0;
- gsm_response(gsm, 0, UA|PF);
+ gsm_dlci_begin_close(dlci);
}
}
break;
@@ -1326,11 +1362,12 @@ static void gsm_control_response(struct gsm_mux *gsm, unsigned int command,
static void gsm_control_transmit(struct gsm_mux *gsm, struct gsm_control *ctrl)
{
- struct gsm_msg *msg = gsm_data_alloc(gsm, 0, ctrl->len + 1, gsm->ftype);
+ struct gsm_msg *msg = gsm_data_alloc(gsm, 0, ctrl->len + 2, gsm->ftype);
if (msg == NULL)
return;
- msg->data[0] = (ctrl->cmd << 1) | 2 | EA; /* command */
- memcpy(msg->data + 1, ctrl->data, ctrl->len);
+ msg->data[0] = (ctrl->cmd << 1) | CR | EA; /* command */
+ msg->data[1] = (ctrl->len << 1) | EA;
+ memcpy(msg->data + 2, ctrl->data, ctrl->len);
gsm_data_queue(gsm->dlci[0], msg);
}
@@ -1353,7 +1390,6 @@ static void gsm_control_retransmit(struct timer_list *t)
spin_lock_irqsave(&gsm->control_lock, flags);
ctrl = gsm->pending_cmd;
if (ctrl) {
- gsm->cretries--;
if (gsm->cretries == 0) {
gsm->pending_cmd = NULL;
ctrl->error = -ETIMEDOUT;
@@ -1362,6 +1398,7 @@ static void gsm_control_retransmit(struct timer_list *t)
wake_up(&gsm->event);
return;
}
+ gsm->cretries--;
gsm_control_transmit(gsm, ctrl);
mod_timer(&gsm->t2_timer, jiffies + gsm->t2 * HZ / 100);
}
@@ -1402,7 +1439,7 @@ retry:
/* If DLCI0 is in ADM mode skip retries, it won't respond */
if (gsm->dlci[0]->mode == DLCI_MODE_ADM)
- gsm->cretries = 1;
+ gsm->cretries = 0;
else
gsm->cretries = gsm->n2;
@@ -1450,20 +1487,22 @@ static int gsm_control_wait(struct gsm_mux *gsm, struct gsm_control *control)
static void gsm_dlci_close(struct gsm_dlci *dlci)
{
+ unsigned long flags;
+
del_timer(&dlci->t1);
if (debug & 8)
pr_debug("DLCI %d goes closed.\n", dlci->addr);
dlci->state = DLCI_CLOSED;
if (dlci->addr != 0) {
tty_port_tty_hangup(&dlci->port, false);
+ spin_lock_irqsave(&dlci->lock, flags);
kfifo_reset(&dlci->fifo);
+ spin_unlock_irqrestore(&dlci->lock, flags);
/* Ensure that gsmtty_open() can return. */
tty_port_set_initialized(&dlci->port, 0);
wake_up_interruptible(&dlci->port.open_wait);
} else
dlci->gsm->dead = true;
- /* Unregister gsmtty driver,report gsmtty dev remove uevent for user */
- tty_unregister_device(gsm_tty_driver, dlci->addr);
wake_up(&dlci->gsm->event);
/* A DLCI 0 close is a MUX termination so we need to kick that
back to userspace somehow */
@@ -1485,8 +1524,9 @@ static void gsm_dlci_open(struct gsm_dlci *dlci)
dlci->state = DLCI_OPEN;
if (debug & 8)
pr_debug("DLCI %d goes open.\n", dlci->addr);
- /* Register gsmtty driver,report gsmtty dev add uevent for user */
- tty_register_device(gsm_tty_driver, dlci->addr, NULL);
+ /* Send current modem state */
+ if (dlci->addr)
+ gsm_modem_update(dlci, 0);
wake_up(&dlci->gsm->event);
}
@@ -1619,10 +1659,12 @@ static void gsm_dlci_data(struct gsm_dlci *dlci, const u8 *data, int clen)
if (len == 0)
return;
}
+ len--;
slen++;
tty = tty_port_tty_get(port);
if (tty) {
gsm_process_modem(tty, dlci, modem, slen);
+ tty_wakeup(tty);
tty_kref_put(tty);
}
fallthrough;
@@ -1690,7 +1732,7 @@ static struct gsm_dlci *gsm_dlci_alloc(struct gsm_mux *gsm, int addr)
return NULL;
spin_lock_init(&dlci->lock);
mutex_init(&dlci->mutex);
- if (kfifo_alloc(&dlci->fifo, 4096, GFP_KERNEL) < 0) {
+ if (kfifo_alloc(&dlci->fifo, TX_SIZE, GFP_KERNEL) < 0) {
kfree(dlci);
return NULL;
}
@@ -1793,19 +1835,7 @@ static void gsm_queue(struct gsm_mux *gsm)
struct gsm_dlci *dlci;
u8 cr;
int address;
- int i, j, k, address_tmp;
- /* We have to sneak a look at the packet body to do the FCS.
- A somewhat layering violation in the spec */
- if ((gsm->control & ~PF) == UI)
- gsm->fcs = gsm_fcs_add_block(gsm->fcs, gsm->buf, gsm->len);
- if (gsm->encoding == 0) {
- /* WARNING: gsm->received_fcs is used for
- gsm->encoding = 0 only.
- In this case it contain the last piece of data
- required to generate final CRC */
- gsm->fcs = gsm_fcs_add(gsm->fcs, gsm->received_fcs);
- }
if (gsm->fcs != GOOD_FCS) {
gsm->bad_fcs++;
if (debug & 4)
@@ -1836,11 +1866,6 @@ static void gsm_queue(struct gsm_mux *gsm)
else {
gsm_response(gsm, address, UA|PF);
gsm_dlci_open(dlci);
- /* Save dlci open address */
- if (address) {
- addr_open[addr_cnt] = address;
- addr_cnt++;
- }
}
break;
case DISC|PF:
@@ -1851,35 +1876,9 @@ static void gsm_queue(struct gsm_mux *gsm)
return;
}
/* Real close complete */
- if (!address) {
- if (addr_cnt > 0) {
- for (i = 0; i < addr_cnt; i++) {
- address = addr_open[i];
- dlci = gsm->dlci[address];
- gsm_dlci_close(dlci);
- addr_open[i] = 0;
- }
- }
- dlci = gsm->dlci[0];
- gsm_dlci_close(dlci);
- addr_cnt = 0;
- gsm_response(gsm, 0, UA|PF);
- } else {
- gsm_response(gsm, address, UA|PF);
- gsm_dlci_close(dlci);
- /* clear dlci address */
- for (j = 0; j < addr_cnt; j++) {
- address_tmp = addr_open[j];
- if (address_tmp == address) {
- for (k = j; k < addr_cnt; k++)
- addr_open[k] = addr_open[k+1];
- addr_cnt--;
- break;
- }
- }
- }
+ gsm_response(gsm, address, UA|PF);
+ gsm_dlci_close(dlci);
break;
- case UA:
case UA|PF:
if (cr == 0 || dlci == NULL)
break;
@@ -1993,19 +1992,25 @@ static void gsm0_receive(struct gsm_mux *gsm, unsigned char c)
break;
case GSM_DATA: /* Data */
gsm->buf[gsm->count++] = c;
- if (gsm->count == gsm->len)
+ if (gsm->count == gsm->len) {
+ /* Calculate final FCS for UI frames over all data */
+ if ((gsm->control & ~PF) != UIH) {
+ gsm->fcs = gsm_fcs_add_block(gsm->fcs, gsm->buf,
+ gsm->count);
+ }
gsm->state = GSM_FCS;
+ }
break;
case GSM_FCS: /* FCS follows the packet */
- gsm->received_fcs = c;
- gsm_queue(gsm);
+ gsm->fcs = gsm_fcs_add(gsm->fcs, c);
gsm->state = GSM_SSOF;
break;
case GSM_SSOF:
- if (c == GSM0_SOF) {
- gsm->state = GSM_SEARCH;
- break;
- }
+ gsm->state = GSM_SEARCH;
+ if (c == GSM0_SOF)
+ gsm_queue(gsm);
+ else
+ gsm->bad_size++;
break;
default:
pr_debug("%s: unhandled state: %d\n", __func__, gsm->state);
@@ -2023,12 +2028,35 @@ static void gsm0_receive(struct gsm_mux *gsm, unsigned char c)
static void gsm1_receive(struct gsm_mux *gsm, unsigned char c)
{
+ /* handle XON/XOFF */
+ if ((c & ISO_IEC_646_MASK) == XON) {
+ gsm->constipated = true;
+ return;
+ } else if ((c & ISO_IEC_646_MASK) == XOFF) {
+ gsm->constipated = false;
+ /* Kick the link in case it is idling */
+ gsm_data_kick(gsm, NULL);
+ return;
+ }
if (c == GSM1_SOF) {
- /* EOF is only valid in frame if we have got to the data state
- and received at least one byte (the FCS) */
- if (gsm->state == GSM_DATA && gsm->count) {
- /* Extract the FCS */
+ /* EOF is only valid in frame if we have got to the data state */
+ if (gsm->state == GSM_DATA) {
+ if (gsm->count < 1) {
+ /* Missing FSC */
+ gsm->malformed++;
+ gsm->state = GSM_START;
+ return;
+ }
+ /* Remove the FCS from data */
gsm->count--;
+ if ((gsm->control & ~PF) != UIH) {
+ /* Calculate final FCS for UI frames over all
+ * data but FCS
+ */
+ gsm->fcs = gsm_fcs_add_block(gsm->fcs, gsm->buf,
+ gsm->count);
+ }
+ /* Add the FCS itself to test against GOOD_FCS */
gsm->fcs = gsm_fcs_add(gsm->fcs, gsm->buf[gsm->count]);
gsm->len = gsm->count;
gsm_queue(gsm);
@@ -2037,7 +2065,8 @@ static void gsm1_receive(struct gsm_mux *gsm, unsigned char c)
}
/* Any partial frame was a runt so go back to start */
if (gsm->state != GSM_START) {
- gsm->malformed++;
+ if (gsm->state != GSM_SEARCH)
+ gsm->malformed++;
gsm->state = GSM_START;
}
/* A SOF in GSM_START means we are still reading idling or
@@ -2106,74 +2135,43 @@ static void gsm_error(struct gsm_mux *gsm)
gsm->io_error++;
}
-static int gsm_disconnect(struct gsm_mux *gsm)
-{
- struct gsm_dlci *dlci = gsm->dlci[0];
- struct gsm_control *gc;
-
- if (!dlci)
- return 0;
-
- /* In theory disconnecting DLCI 0 is sufficient but for some
- modems this is apparently not the case. */
- gc = gsm_control_send(gsm, CMD_CLD, NULL, 0);
- if (gc)
- gsm_control_wait(gsm, gc);
-
- del_timer_sync(&gsm->t2_timer);
- /* Now we are sure T2 has stopped */
-
- gsm_dlci_begin_close(dlci);
- wait_event_interruptible(gsm->event,
- dlci->state == DLCI_CLOSED);
-
- if (signal_pending(current))
- return -EINTR;
-
- return 0;
-}
-
/**
* gsm_cleanup_mux - generic GSM protocol cleanup
* @gsm: our mux
+ * @disc: disconnect link?
*
* Clean up the bits of the mux which are the same for all framing
* protocols. Remove the mux from the mux table, stop all the timers
* and then shut down each device hanging up the channels as we go.
*/
-static void gsm_cleanup_mux(struct gsm_mux *gsm)
+static void gsm_cleanup_mux(struct gsm_mux *gsm, bool disc)
{
int i;
struct gsm_dlci *dlci = gsm->dlci[0];
struct gsm_msg *txq, *ntxq;
gsm->dead = true;
+ mutex_lock(&gsm->mutex);
- spin_lock(&gsm_mux_lock);
- for (i = 0; i < MAX_MUX; i++) {
- if (gsm_mux[i] == gsm) {
- gsm_mux[i] = NULL;
- break;
+ if (dlci) {
+ if (disc && dlci->state != DLCI_CLOSED) {
+ gsm_dlci_begin_close(dlci);
+ wait_event(gsm->event, dlci->state == DLCI_CLOSED);
}
+ dlci->dead = true;
}
- spin_unlock(&gsm_mux_lock);
- /* open failed before registering => nothing to do */
- if (i == MAX_MUX)
- return;
+ /* Finish outstanding timers, making sure they are done */
del_timer_sync(&gsm->t2_timer);
- /* Now we are sure T2 has stopped */
- if (dlci)
- dlci->dead = true;
- /* Free up any link layer users */
- mutex_lock(&gsm->mutex);
- for (i = 0; i < NUM_DLCI; i++)
+ /* Free up any link layer users and finally the control channel */
+ for (i = NUM_DLCI - 1; i >= 0; i--)
if (gsm->dlci[i])
gsm_dlci_release(gsm->dlci[i]);
mutex_unlock(&gsm->mutex);
/* Now wipe the queues */
+ tty_ldisc_flush(gsm->tty);
list_for_each_entry_safe(txq, ntxq, &gsm->tx_list, list)
kfree(txq);
INIT_LIST_HEAD(&gsm->tx_list);
@@ -2191,7 +2189,6 @@ static void gsm_cleanup_mux(struct gsm_mux *gsm)
static int gsm_activate_mux(struct gsm_mux *gsm)
{
struct gsm_dlci *dlci;
- int i = 0;
timer_setup(&gsm->t2_timer, gsm_control_retransmit, 0);
init_waitqueue_head(&gsm->event);
@@ -2203,18 +2200,6 @@ static int gsm_activate_mux(struct gsm_mux *gsm)
else
gsm->receive = gsm1_receive;
- spin_lock(&gsm_mux_lock);
- for (i = 0; i < MAX_MUX; i++) {
- if (gsm_mux[i] == NULL) {
- gsm->num = i;
- gsm_mux[i] = gsm;
- break;
- }
- }
- spin_unlock(&gsm_mux_lock);
- if (i == MAX_MUX)
- return -EBUSY;
-
dlci = gsm_dlci_alloc(gsm, 0);
if (dlci == NULL)
return -ENOMEM;
@@ -2230,6 +2215,15 @@ static int gsm_activate_mux(struct gsm_mux *gsm)
*/
static void gsm_free_mux(struct gsm_mux *gsm)
{
+ int i;
+
+ for (i = 0; i < MAX_MUX; i++) {
+ if (gsm == gsm_mux[i]) {
+ gsm_mux[i] = NULL;
+ break;
+ }
+ }
+ mutex_destroy(&gsm->mutex);
kfree(gsm->txframe);
kfree(gsm->buf);
kfree(gsm);
@@ -2249,12 +2243,20 @@ static void gsm_free_muxr(struct kref *ref)
static inline void mux_get(struct gsm_mux *gsm)
{
+ unsigned long flags;
+
+ spin_lock_irqsave(&gsm_mux_lock, flags);
kref_get(&gsm->ref);
+ spin_unlock_irqrestore(&gsm_mux_lock, flags);
}
static inline void mux_put(struct gsm_mux *gsm)
{
+ unsigned long flags;
+
+ spin_lock_irqsave(&gsm_mux_lock, flags);
kref_put(&gsm->ref, gsm_free_muxr);
+ spin_unlock_irqrestore(&gsm_mux_lock, flags);
}
static inline unsigned int mux_num_to_base(struct gsm_mux *gsm)
@@ -2275,6 +2277,7 @@ static inline unsigned int mux_line_to_num(unsigned int line)
static struct gsm_mux *gsm_alloc_mux(void)
{
+ int i;
struct gsm_mux *gsm = kzalloc(sizeof(struct gsm_mux), GFP_KERNEL);
if (gsm == NULL)
return NULL;
@@ -2283,7 +2286,7 @@ static struct gsm_mux *gsm_alloc_mux(void)
kfree(gsm);
return NULL;
}
- gsm->txframe = kmalloc(2 * MAX_MRU + 2, GFP_KERNEL);
+ gsm->txframe = kmalloc(2 * (MAX_MTU + PROT_OVERHEAD - 1), GFP_KERNEL);
if (gsm->txframe == NULL) {
kfree(gsm->buf);
kfree(gsm);
@@ -2304,6 +2307,26 @@ static struct gsm_mux *gsm_alloc_mux(void)
gsm->mtu = 64;
gsm->dead = true; /* Avoid early tty opens */
+ /* Store the instance to the mux array or abort if no space is
+ * available.
+ */
+ spin_lock(&gsm_mux_lock);
+ for (i = 0; i < MAX_MUX; i++) {
+ if (!gsm_mux[i]) {
+ gsm_mux[i] = gsm;
+ gsm->num = i;
+ break;
+ }
+ }
+ spin_unlock(&gsm_mux_lock);
+ if (i == MAX_MUX) {
+ mutex_destroy(&gsm->mutex);
+ kfree(gsm->txframe);
+ kfree(gsm->buf);
+ kfree(gsm);
+ return NULL;
+ }
+
return gsm;
}
@@ -2330,6 +2353,7 @@ static void gsm_copy_config_values(struct gsm_mux *gsm,
static int gsm_config(struct gsm_mux *gsm, struct gsm_config *c)
{
+ int ret = 0;
int need_close = 0;
int need_restart = 0;
@@ -2339,7 +2363,7 @@ static int gsm_config(struct gsm_mux *gsm, struct gsm_config *c)
/* Check the MRU/MTU range looks sane */
if (c->mru > MAX_MRU || c->mtu > MAX_MTU || c->mru < 8 || c->mtu < 8)
return -EINVAL;
- if (c->n2 < 3)
+ if (c->n2 > 255)
return -EINVAL;
if (c->encapsulation > 1) /* Basic, advanced, no I */
return -EINVAL;
@@ -2370,19 +2394,11 @@ static int gsm_config(struct gsm_mux *gsm, struct gsm_config *c)
/*
* Close down what is needed, restart and initiate the new
- * configuration
+ * configuration. On the first time there is no DLCI[0]
+ * and closing or cleaning up is not necessary.
*/
-
- if (gsm->initiator && (need_close || need_restart)) {
- int ret;
-
- ret = gsm_disconnect(gsm);
-
- if (ret)
- return ret;
- }
- if (need_restart)
- gsm_cleanup_mux(gsm);
+ if (need_close || need_restart)
+ gsm_cleanup_mux(gsm, true);
gsm->initiator = c->initiator;
gsm->mru = c->mru;
@@ -2405,10 +2421,13 @@ static int gsm_config(struct gsm_mux *gsm, struct gsm_config *c)
* FIXME: We need to separate activation/deactivation from adding
* and removing from the mux array
*/
- if (need_restart)
- gsm_activate_mux(gsm);
- if (gsm->initiator && need_close)
- gsm_dlci_begin_open(gsm->dlci[0]);
+ if (gsm->dead) {
+ ret = gsm_activate_mux(gsm);
+ if (ret)
+ return ret;
+ if (gsm->initiator)
+ gsm_dlci_begin_open(gsm->dlci[0]);
+ }
return 0;
}
@@ -2450,25 +2469,26 @@ static int gsmld_attach_gsm(struct tty_struct *tty, struct gsm_mux *gsm)
int ret, i;
gsm->tty = tty_kref_get(tty);
+ /* Turn off tty XON/XOFF handling to handle it explicitly. */
+ gsm->old_c_iflag = tty->termios.c_iflag;
+ tty->termios.c_iflag &= (IXON | IXOFF);
ret = gsm_activate_mux(gsm);
if (ret != 0)
tty_kref_put(gsm->tty);
else {
/* Don't register device 0 - this is the control channel and not
a usable tty interface */
- if (gsm->initiator) {
- base = mux_num_to_base(gsm); /* Base for this MUX */
- for (i = 1; i < NUM_DLCI; i++) {
- struct device *dev;
+ base = mux_num_to_base(gsm); /* Base for this MUX */
+ for (i = 1; i < NUM_DLCI; i++) {
+ struct device *dev;
- dev = tty_register_device(gsm_tty_driver,
+ dev = tty_register_device(gsm_tty_driver,
base + i, NULL);
- if (IS_ERR(dev)) {
- for (i--; i >= 1; i--)
- tty_unregister_device(gsm_tty_driver,
- base + i);
- return PTR_ERR(dev);
- }
+ if (IS_ERR(dev)) {
+ for (i--; i >= 1; i--)
+ tty_unregister_device(gsm_tty_driver,
+ base + i);
+ return PTR_ERR(dev);
}
}
}
@@ -2490,11 +2510,10 @@ static void gsmld_detach_gsm(struct tty_struct *tty, struct gsm_mux *gsm)
int i;
WARN_ON(tty != gsm->tty);
- if (gsm->initiator) {
- for (i = 1; i < NUM_DLCI; i++)
- tty_unregister_device(gsm_tty_driver, base + i);
- }
- gsm_cleanup_mux(gsm);
+ for (i = 1; i < NUM_DLCI; i++)
+ tty_unregister_device(gsm_tty_driver, base + i);
+ /* Restore tty XON/XOFF handling. */
+ gsm->tty->termios.c_iflag = gsm->old_c_iflag;
tty_kref_put(gsm->tty);
gsm->tty = NULL;
}
@@ -2559,6 +2578,12 @@ static void gsmld_close(struct tty_struct *tty)
{
struct gsm_mux *gsm = tty->disc_data;
+ /* The ldisc locks and closes the port before calling our close. This
+ * means we have no way to do a proper disconnect. We will not bother
+ * to do one.
+ */
+ gsm_cleanup_mux(gsm, false);
+
gsmld_detach_gsm(tty, gsm);
gsmld_flush_buffer(tty);
@@ -2597,7 +2622,7 @@ static int gsmld_open(struct tty_struct *tty)
ret = gsmld_attach_gsm(tty, gsm);
if (ret != 0) {
- gsm_cleanup_mux(gsm);
+ gsm_cleanup_mux(gsm, false);
mux_put(gsm);
}
return ret;
@@ -2952,28 +2977,78 @@ static struct tty_ldisc_ops tty_ldisc_packet = {
* Virtual tty side
*/
-#define TX_SIZE 512
+/**
+ * gsm_modem_upd_via_data - send modem bits via convergence layer
+ * @dlci: channel
+ * @brk: break signal
+ *
+ * Send an empty frame to signal mobile state changes and to transmit the
+ * break signal for adaption 2.
+ */
+
+static void gsm_modem_upd_via_data(struct gsm_dlci *dlci, u8 brk)
+{
+ struct gsm_mux *gsm = dlci->gsm;
+ unsigned long flags;
+
+ if (dlci->state != DLCI_OPEN || dlci->adaption != 2)
+ return;
+
+ spin_lock_irqsave(&gsm->tx_lock, flags);
+ gsm_dlci_modem_output(gsm, dlci, brk);
+ spin_unlock_irqrestore(&gsm->tx_lock, flags);
+}
+
+/**
+ * gsm_modem_upd_via_msc - send modem bits via control frame
+ * @dlci: channel
+ * @brk: break signal
+ */
-static int gsmtty_modem_update(struct gsm_dlci *dlci, u8 brk)
+static int gsm_modem_upd_via_msc(struct gsm_dlci *dlci, u8 brk)
{
- u8 modembits[5];
+ u8 modembits[3];
struct gsm_control *ctrl;
int len = 2;
- if (brk)
- len++;
+ if (dlci->gsm->encoding != 0)
+ return 0;
- modembits[0] = len << 1 | EA; /* Data bytes */
- modembits[1] = dlci->addr << 2 | 3; /* DLCI, EA, 1 */
- modembits[2] = gsm_encode_modem(dlci) << 1 | EA;
- if (brk)
- modembits[3] = brk << 4 | 2 | EA; /* Valid, EA */
- ctrl = gsm_control_send(dlci->gsm, CMD_MSC, modembits, len + 1);
+ modembits[0] = (dlci->addr << 2) | 2 | EA; /* DLCI, Valid, EA */
+ if (!brk) {
+ modembits[1] = (gsm_encode_modem(dlci) << 1) | EA;
+ } else {
+ modembits[1] = gsm_encode_modem(dlci) << 1;
+ modembits[2] = (brk << 4) | 2 | EA; /* Length, Break, EA */
+ len++;
+ }
+ ctrl = gsm_control_send(dlci->gsm, CMD_MSC, modembits, len);
if (ctrl == NULL)
return -ENOMEM;
return gsm_control_wait(dlci->gsm, ctrl);
}
+/**
+ * gsm_modem_update - send modem status line state
+ * @dlci: channel
+ * @brk: break signal
+ */
+
+static int gsm_modem_update(struct gsm_dlci *dlci, u8 brk)
+{
+ if (dlci->adaption == 2) {
+ /* Send convergence layer type 2 empty data frame. */
+ gsm_modem_upd_via_data(dlci, brk);
+ return 0;
+ } else if (dlci->gsm->encoding == 0) {
+ /* Send as MSC control message. */
+ return gsm_modem_upd_via_msc(dlci, brk);
+ }
+
+ /* Modem status lines are not supported. */
+ return -EPROTONOSUPPORT;
+}
+
static int gsm_carrier_raised(struct tty_port *port)
{
struct gsm_dlci *dlci = container_of(port, struct gsm_dlci, port);
@@ -3006,7 +3081,7 @@ static void gsm_dtr_rts(struct tty_port *port, int onoff)
modem_tx &= ~(TIOCM_DTR | TIOCM_RTS);
if (modem_tx != dlci->modem_tx) {
dlci->modem_tx = modem_tx;
- gsmtty_modem_update(dlci, 0);
+ gsm_modem_update(dlci, 0);
}
}
@@ -3141,7 +3216,7 @@ static unsigned int gsmtty_write_room(struct tty_struct *tty)
struct gsm_dlci *dlci = tty->driver_data;
if (dlci->state == DLCI_CLOSED)
return 0;
- return TX_SIZE - kfifo_len(&dlci->fifo);
+ return kfifo_avail(&dlci->fifo);
}
static unsigned int gsmtty_chars_in_buffer(struct tty_struct *tty)
@@ -3155,13 +3230,17 @@ static unsigned int gsmtty_chars_in_buffer(struct tty_struct *tty)
static void gsmtty_flush_buffer(struct tty_struct *tty)
{
struct gsm_dlci *dlci = tty->driver_data;
+ unsigned long flags;
+
if (dlci->state == DLCI_CLOSED)
return;
/* Caution needed: If we implement reliable transport classes
then the data being transmitted can't simply be junked once
it has first hit the stack. Until then we can just blow it
away */
+ spin_lock_irqsave(&dlci->lock, flags);
kfifo_reset(&dlci->fifo);
+ spin_unlock_irqrestore(&dlci->lock, flags);
/* Need to unhook this DLCI from the transmit queue logic */
}
@@ -3193,7 +3272,7 @@ static int gsmtty_tiocmset(struct tty_struct *tty,
if (modem_tx != dlci->modem_tx) {
dlci->modem_tx = modem_tx;
- return gsmtty_modem_update(dlci, 0);
+ return gsm_modem_update(dlci, 0);
}
return 0;
}
@@ -3254,7 +3333,7 @@ static void gsmtty_throttle(struct tty_struct *tty)
dlci->modem_tx &= ~TIOCM_RTS;
dlci->throttled = true;
/* Send an MSC with RTS cleared */
- gsmtty_modem_update(dlci, 0);
+ gsm_modem_update(dlci, 0);
}
static void gsmtty_unthrottle(struct tty_struct *tty)
@@ -3266,7 +3345,7 @@ static void gsmtty_unthrottle(struct tty_struct *tty)
dlci->modem_tx |= TIOCM_RTS;
dlci->throttled = false;
/* Send an MSC with RTS set */
- gsmtty_modem_update(dlci, 0);
+ gsm_modem_update(dlci, 0);
}
static int gsmtty_break_ctl(struct tty_struct *tty, int state)
@@ -3284,7 +3363,7 @@ static int gsmtty_break_ctl(struct tty_struct *tty, int state)
if (encode > 0x0F)
encode = 0x0F; /* Best effort */
}
- return gsmtty_modem_update(dlci, encode);
+ return gsm_modem_update(dlci, encode);
}
static void gsmtty_cleanup(struct tty_struct *tty)
diff --git a/drivers/tty/serial/8250/8250.h b/drivers/tty/serial/8250/8250.h
index db784ace25d8..a8830e15a22c 100644
--- a/drivers/tty/serial/8250/8250.h
+++ b/drivers/tty/serial/8250/8250.h
@@ -259,6 +259,7 @@ static inline int fintek_8250_probe(struct uart_8250_port *uart) { return 0; }
#endif
#ifdef CONFIG_ARCH_OMAP1
+#include <linux/soc/ti/omap1-soc.h>
static inline int is_omap1_8250(struct uart_8250_port *pt)
{
int res;
diff --git a/drivers/tty/serial/8250/8250_mtk.c b/drivers/tty/serial/8250/8250_mtk.c
index f4a0caa56f84..21053db93ff1 100644
--- a/drivers/tty/serial/8250/8250_mtk.c
+++ b/drivers/tty/serial/8250/8250_mtk.c
@@ -37,6 +37,7 @@
#define MTK_UART_IER_RTSI 0x40 /* Enable RTS Modem status interrupt */
#define MTK_UART_IER_CTSI 0x80 /* Enable CTS Modem status interrupt */
+#define MTK_UART_EFR 38 /* I/O: Extended Features Register */
#define MTK_UART_EFR_EN 0x10 /* Enable enhancement feature */
#define MTK_UART_EFR_RTS 0x40 /* Enable hardware rx flow control */
#define MTK_UART_EFR_CTS 0x80 /* Enable hardware tx flow control */
@@ -53,6 +54,12 @@
#define MTK_UART_TX_TRIGGER 1
#define MTK_UART_RX_TRIGGER MTK_UART_RX_SIZE
+#define MTK_UART_FEATURE_SEL 39 /* Feature Selection register */
+#define MTK_UART_FEAT_NEWRMAP BIT(0) /* Use new register map */
+
+#define MTK_UART_XON1 40 /* I/O: Xon character 1 */
+#define MTK_UART_XOFF1 42 /* I/O: Xoff character 1 */
+
#ifdef CONFIG_SERIAL_8250_DMA
enum dma_rx_status {
DMA_RX_START = 0,
@@ -169,7 +176,7 @@ static void mtk8250_dma_enable(struct uart_8250_port *up)
MTK_UART_DMA_EN_RX | MTK_UART_DMA_EN_TX);
serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);
- serial_out(up, UART_EFR, UART_EFR_ECB);
+ serial_out(up, MTK_UART_EFR, UART_EFR_ECB);
serial_out(up, UART_LCR, lcr);
if (dmaengine_slave_config(dma->rxchan, &dma->rxconf) != 0)
@@ -232,7 +239,7 @@ static void mtk8250_set_flow_ctrl(struct uart_8250_port *up, int mode)
int lcr = serial_in(up, UART_LCR);
serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);
- serial_out(up, UART_EFR, UART_EFR_ECB);
+ serial_out(up, MTK_UART_EFR, UART_EFR_ECB);
serial_out(up, UART_LCR, lcr);
lcr = serial_in(up, UART_LCR);
@@ -241,7 +248,7 @@ static void mtk8250_set_flow_ctrl(struct uart_8250_port *up, int mode)
serial_out(up, MTK_UART_ESCAPE_DAT, MTK_UART_ESCAPE_CHAR);
serial_out(up, MTK_UART_ESCAPE_EN, 0x00);
serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);
- serial_out(up, UART_EFR, serial_in(up, UART_EFR) &
+ serial_out(up, MTK_UART_EFR, serial_in(up, MTK_UART_EFR) &
(~(MTK_UART_EFR_HW_FC | MTK_UART_EFR_SW_FC_MASK)));
serial_out(up, UART_LCR, lcr);
mtk8250_disable_intrs(up, MTK_UART_IER_XOFFI |
@@ -255,8 +262,8 @@ static void mtk8250_set_flow_ctrl(struct uart_8250_port *up, int mode)
serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);
/*enable hw flow control*/
- serial_out(up, UART_EFR, MTK_UART_EFR_HW_FC |
- (serial_in(up, UART_EFR) &
+ serial_out(up, MTK_UART_EFR, MTK_UART_EFR_HW_FC |
+ (serial_in(up, MTK_UART_EFR) &
(~(MTK_UART_EFR_HW_FC | MTK_UART_EFR_SW_FC_MASK))));
serial_out(up, UART_LCR, lcr);
@@ -270,12 +277,12 @@ static void mtk8250_set_flow_ctrl(struct uart_8250_port *up, int mode)
serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);
/*enable sw flow control */
- serial_out(up, UART_EFR, MTK_UART_EFR_XON1_XOFF1 |
- (serial_in(up, UART_EFR) &
+ serial_out(up, MTK_UART_EFR, MTK_UART_EFR_XON1_XOFF1 |
+ (serial_in(up, MTK_UART_EFR) &
(~(MTK_UART_EFR_HW_FC | MTK_UART_EFR_SW_FC_MASK))));
- serial_out(up, UART_XON1, START_CHAR(port->state->port.tty));
- serial_out(up, UART_XOFF1, STOP_CHAR(port->state->port.tty));
+ serial_out(up, MTK_UART_XON1, START_CHAR(port->state->port.tty));
+ serial_out(up, MTK_UART_XOFF1, STOP_CHAR(port->state->port.tty));
serial_out(up, UART_LCR, lcr);
mtk8250_disable_intrs(up, MTK_UART_IER_CTSI|MTK_UART_IER_RTSI);
mtk8250_enable_intrs(up, MTK_UART_IER_XOFFI);
@@ -568,6 +575,10 @@ static int mtk8250_probe(struct platform_device *pdev)
uart.dma = data->dma;
#endif
+ /* Set AP UART new register map */
+ writel(MTK_UART_FEAT_NEWRMAP, uart.port.membase +
+ (MTK_UART_FEATURE_SEL << uart.port.regshift));
+
/* Disable Rate Fix function */
writel(0x0, uart.port.membase +
(MTK_UART_RATE_FIX << uart.port.regshift));
diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index e17e97ea86fa..a293e9f107d0 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -2667,7 +2667,7 @@ enum pci_board_num_t {
pbn_panacom2,
pbn_panacom4,
pbn_plx_romulus,
- pbn_endrun_2_4000000,
+ pbn_endrun_2_3906250,
pbn_oxsemi,
pbn_oxsemi_1_3906250,
pbn_oxsemi_2_3906250,
@@ -3195,10 +3195,10 @@ static struct pciserial_board pci_boards[] = {
* signal now many ports are available
* 2 port 952 Uart support
*/
- [pbn_endrun_2_4000000] = {
+ [pbn_endrun_2_3906250] = {
.flags = FL_BASE0,
.num_ports = 2,
- .base_baud = 4000000,
+ .base_baud = 3906250,
.uart_offset = 0x200,
.first_offset = 0x1000,
},
@@ -4115,7 +4115,7 @@ static const struct pci_device_id serial_pci_tbl[] = {
*/
{ PCI_VENDOR_ID_ENDRUN, PCI_DEVICE_ID_ENDRUN_1588,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_endrun_2_4000000 },
+ pbn_endrun_2_3906250 },
/*
* Quatech cards. These actually have configurable clocks but for
* now we just use the default.
diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
index 318af6f13605..1fbd5bf264be 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -1675,11 +1675,11 @@ static void serial8250_start_tx(struct uart_port *port)
struct uart_8250_port *up = up_to_u8250p(port);
struct uart_8250_em485 *em485 = up->em485;
- serial8250_rpm_get_tx(up);
-
if (!port->x_char && uart_circ_empty(&port->state->xmit))
return;
+ serial8250_rpm_get_tx(up);
+
if (em485 &&
em485->active_timer == &em485->start_tx_timer)
return;
@@ -3329,7 +3329,7 @@ static void serial8250_console_restore(struct uart_8250_port *up)
serial8250_set_divisor(port, baud, quot, frac);
serial_port_out(port, UART_LCR, up->lcr);
- serial8250_out_MCR(up, UART_MCR_DTR | UART_MCR_RTS);
+ serial8250_out_MCR(up, up->mcr | UART_MCR_DTR | UART_MCR_RTS);
}
/*
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 6949e883ffab..dbac90e2e209 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -654,7 +654,7 @@ config SERIAL_IP22_ZILOG_CONSOLE
config SERIAL_SH_SCI
tristate "SuperH SCI(F) serial port support"
- depends on SUPERH || ARCH_RENESAS || H8300 || COMPILE_TEST
+ depends on SUPERH || ARCH_RENESAS || COMPILE_TEST
select SERIAL_CORE
select SERIAL_MCTRL_GPIO if GPIOLIB
@@ -663,7 +663,6 @@ config SERIAL_SH_SCI_NR_UARTS
range 1 64 if 64BIT
range 1 32 if !64BIT
depends on SERIAL_SH_SCI
- default "3" if H8300
default "10" if SUPERH
default "18" if ARCH_RENESAS
default "2"
@@ -679,7 +678,7 @@ config SERIAL_SH_SCI_EARLYCON
depends on SERIAL_SH_SCI=y
select SERIAL_CORE_CONSOLE
select SERIAL_EARLYCON
- default ARCH_RENESAS || H8300
+ default ARCH_RENESAS
config SERIAL_SH_SCI_DMA
bool "DMA support" if EXPERT
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index 51ecb050ae40..4d11a3e547f9 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -1255,13 +1255,18 @@ static inline bool pl011_dma_rx_running(struct uart_amba_port *uap)
static void pl011_rs485_tx_stop(struct uart_amba_port *uap)
{
+ /*
+ * To be on the safe side only time out after twice as many iterations
+ * as fifo size.
+ */
+ const int MAX_TX_DRAIN_ITERS = uap->port.fifosize * 2;
struct uart_port *port = &uap->port;
int i = 0;
u32 cr;
/* Wait until hardware tx queue is empty */
while (!pl011_tx_empty(port)) {
- if (i == port->fifosize) {
+ if (i > MAX_TX_DRAIN_ITERS) {
dev_warn(port->dev,
"timeout while draining hardware tx queue\n");
break;
@@ -2052,7 +2057,7 @@ pl011_set_termios(struct uart_port *port, struct ktermios *termios,
* with the given baud rate. We use this as the poll interval when we
* wait for the tx queue to empty.
*/
- uap->rs485_tx_drain_interval = (bits * 1000 * 1000) / baud;
+ uap->rs485_tx_drain_interval = DIV_ROUND_UP(bits * 1000 * 1000, baud);
pl011_setup_status_masks(port, termios);
diff --git a/drivers/tty/serial/digicolor-usart.c b/drivers/tty/serial/digicolor-usart.c
index 6d70fea76bb3..e37a917b9dbb 100644
--- a/drivers/tty/serial/digicolor-usart.c
+++ b/drivers/tty/serial/digicolor-usart.c
@@ -471,11 +471,10 @@ static int digicolor_uart_probe(struct platform_device *pdev)
if (IS_ERR(uart_clk))
return PTR_ERR(uart_clk);
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- dp->port.mapbase = res->start;
- dp->port.membase = devm_ioremap_resource(&pdev->dev, res);
+ dp->port.membase = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
if (IS_ERR(dp->port.membase))
return PTR_ERR(dp->port.membase);
+ dp->port.mapbase = res->start;
irq = platform_get_irq(pdev, 0);
if (irq < 0)
diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c
index 87789872f400..be12fee94db5 100644
--- a/drivers/tty/serial/fsl_lpuart.c
+++ b/drivers/tty/serial/fsl_lpuart.c
@@ -2664,6 +2664,7 @@ static int lpuart_probe(struct platform_device *pdev)
struct device_node *np = pdev->dev.of_node;
struct lpuart_port *sport;
struct resource *res;
+ irq_handler_t handler;
int ret;
sport = devm_kzalloc(&pdev->dev, sizeof(*sport), GFP_KERNEL);
@@ -2741,17 +2742,11 @@ static int lpuart_probe(struct platform_device *pdev)
if (lpuart_is_32(sport)) {
lpuart_reg.cons = LPUART32_CONSOLE;
- ret = devm_request_irq(&pdev->dev, sport->port.irq, lpuart32_int, 0,
- DRIVER_NAME, sport);
+ handler = lpuart32_int;
} else {
lpuart_reg.cons = LPUART_CONSOLE;
- ret = devm_request_irq(&pdev->dev, sport->port.irq, lpuart_int, 0,
- DRIVER_NAME, sport);
+ handler = lpuart_int;
}
-
- if (ret)
- goto failed_irq_request;
-
ret = uart_add_one_port(&lpuart_reg, &sport->port);
if (ret)
goto failed_attach_port;
@@ -2773,13 +2768,18 @@ static int lpuart_probe(struct platform_device *pdev)
sport->port.rs485_config(&sport->port, &sport->port.rs485);
+ ret = devm_request_irq(&pdev->dev, sport->port.irq, handler, 0,
+ DRIVER_NAME, sport);
+ if (ret)
+ goto failed_irq_request;
+
return 0;
+failed_irq_request:
failed_get_rs485:
failed_reset:
uart_remove_one_port(&lpuart_reg, &sport->port);
failed_attach_port:
-failed_irq_request:
lpuart_disable_clks(sport);
failed_clock_enable:
failed_out_of_range:
diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index fd38e6ed4fda..b1639b174292 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -30,7 +30,7 @@
#include <linux/dma-mapping.h>
#include <asm/irq.h>
-#include <linux/platform_data/dma-imx.h>
+#include <linux/dma/imx-dma.h>
#include "serial_mctrl_gpio.h"
@@ -1448,7 +1448,7 @@ static int imx_uart_startup(struct uart_port *port)
imx_uart_writel(sport, ucr1, UCR1);
ucr4 = imx_uart_readl(sport, UCR4) & ~(UCR4_OREN | UCR4_INVR);
- if (!sport->dma_is_enabled)
+ if (!dma_is_inited)
ucr4 |= UCR4_OREN;
if (sport->inverted_rx)
ucr4 |= UCR4_INVR;
diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c
index e857fb61efbf..5fb201c1b563 100644
--- a/drivers/tty/serial/sc16is7xx.c
+++ b/drivers/tty/serial/sc16is7xx.c
@@ -1238,12 +1238,10 @@ static void sc16is7xx_shutdown(struct uart_port *port)
/* Disable all interrupts */
sc16is7xx_port_write(port, SC16IS7XX_IER_REG, 0);
- /* Disable TX/RX, clear auto RS485 and RTS invert */
+ /* Disable TX/RX */
sc16is7xx_port_update(port, SC16IS7XX_EFCR_REG,
SC16IS7XX_EFCR_RXDISABLE_BIT |
- SC16IS7XX_EFCR_TXDISABLE_BIT |
- SC16IS7XX_EFCR_AUTO_RS485_BIT |
- SC16IS7XX_EFCR_RTS_INVERT_BIT,
+ SC16IS7XX_EFCR_TXDISABLE_BIT,
SC16IS7XX_EFCR_RXDISABLE_BIT |
SC16IS7XX_EFCR_TXDISABLE_BIT);
diff --git a/drivers/tty/sysrq.c b/drivers/tty/sysrq.c
index bbfd004449b5..2884cd638d64 100644
--- a/drivers/tty/sysrq.c
+++ b/drivers/tty/sysrq.c
@@ -578,6 +578,7 @@ void __handle_sysrq(int key, bool check_mask)
rcu_sysrq_start();
rcu_read_lock();
+ printk_prefer_direct_enter();
/*
* Raise the apparent loglevel to maximum so that the sysrq header
* is shown to provide the user with positive feedback. We do not
@@ -619,6 +620,7 @@ void __handle_sysrq(int key, bool check_mask)
pr_cont("\n");
console_loglevel = orig_log_level;
}
+ printk_prefer_direct_exit();
rcu_read_unlock();
rcu_sysrq_end();
diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c
index 646510476c30..bfa431a8e690 100644
--- a/drivers/tty/tty_buffer.c
+++ b/drivers/tty/tty_buffer.c
@@ -175,7 +175,8 @@ static struct tty_buffer *tty_buffer_alloc(struct tty_port *port, size_t size)
*/
if (atomic_read(&port->buf.mem_used) > port->buf.mem_limit)
return NULL;
- p = kmalloc(sizeof(struct tty_buffer) + 2 * size, GFP_ATOMIC);
+ p = kmalloc(sizeof(struct tty_buffer) + 2 * size,
+ GFP_ATOMIC | __GFP_NOWARN);
if (p == NULL)
return NULL;
generated by cgit v1.2.3 (git 2.39.0) at 2025-01-29 06:05:37 +0300