summaryrefslogtreecommitdiff
path: root/drivers/tty
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/tty')
-rw-r--r--drivers/tty/n_gsm.c2
-rw-r--r--drivers/tty/pty.c79
-rw-r--r--drivers/tty/serial/8250/8250_pci.c8
-rw-r--r--drivers/tty/serial/8250/8250_port.c11
-rw-r--r--drivers/tty/serial/8250/Kconfig1
-rw-r--r--drivers/tty/serial/Kconfig21
-rw-r--r--drivers/tty/serial/Makefile1
-rw-r--r--drivers/tty/serial/max310x.c12
-rw-r--r--drivers/tty/serial/pic32_uart.c960
-rw-r--r--drivers/tty/serial/pic32_uart.h126
-rw-r--r--drivers/tty/serial/sc16is7xx.c16
-rw-r--r--drivers/tty/serial/serial_mctrl_gpio.h4
-rw-r--r--drivers/tty/serial/uartlite.c8
-rw-r--r--drivers/tty/synclink.c4
-rw-r--r--drivers/tty/synclink_gt.c4
-rw-r--r--drivers/tty/synclinkmp.c4
-rw-r--r--drivers/tty/tty_io.c6
17 files changed, 1187 insertions, 80 deletions
diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c
index c01620780f5b..0c27a00ab42d 100644
--- a/drivers/tty/n_gsm.c
+++ b/drivers/tty/n_gsm.c
@@ -2662,7 +2662,7 @@ static int gsm_mux_net_start_xmit(struct sk_buff *skb,
STATS(net).tx_bytes += skb->len;
gsm_dlci_data_kick(dlci);
/* And tell the kernel when the last transmit started. */
- net->trans_start = jiffies;
+ netif_trans_update(net);
muxnet_put(mux_net);
return NETDEV_TX_OK;
}
diff --git a/drivers/tty/pty.c b/drivers/tty/pty.c
index e16a49b507ef..cf0dc51a2690 100644
--- a/drivers/tty/pty.c
+++ b/drivers/tty/pty.c
@@ -626,7 +626,7 @@ static int pty_unix98_ioctl(struct tty_struct *tty,
*/
static struct tty_struct *ptm_unix98_lookup(struct tty_driver *driver,
- struct inode *ptm_inode, int idx)
+ struct file *file, int idx)
{
/* Master must be open via /dev/ptmx */
return ERR_PTR(-EIO);
@@ -642,12 +642,12 @@ static struct tty_struct *ptm_unix98_lookup(struct tty_driver *driver,
*/
static struct tty_struct *pts_unix98_lookup(struct tty_driver *driver,
- struct inode *pts_inode, int idx)
+ struct file *file, int idx)
{
struct tty_struct *tty;
mutex_lock(&devpts_mutex);
- tty = devpts_get_priv(pts_inode);
+ tty = devpts_get_priv(file->f_path.dentry);
mutex_unlock(&devpts_mutex);
/* Master must be open before slave */
if (!tty)
@@ -663,14 +663,14 @@ static int pty_unix98_install(struct tty_driver *driver, struct tty_struct *tty)
/* this is called once with whichever end is closed last */
static void pty_unix98_remove(struct tty_driver *driver, struct tty_struct *tty)
{
- struct inode *ptmx_inode;
+ struct pts_fs_info *fsi;
if (tty->driver->subtype == PTY_TYPE_MASTER)
- ptmx_inode = tty->driver_data;
+ fsi = tty->driver_data;
else
- ptmx_inode = tty->link->driver_data;
- devpts_kill_index(ptmx_inode, tty->index);
- devpts_del_ref(ptmx_inode);
+ fsi = tty->link->driver_data;
+ devpts_kill_index(fsi, tty->index);
+ devpts_put_ref(fsi);
}
static const struct tty_operations ptm_unix98_ops = {
@@ -720,8 +720,9 @@ static const struct tty_operations pty_unix98_ops = {
static int ptmx_open(struct inode *inode, struct file *filp)
{
+ struct pts_fs_info *fsi;
struct tty_struct *tty;
- struct inode *slave_inode;
+ struct dentry *dentry;
int retval;
int index;
@@ -734,54 +735,46 @@ static int ptmx_open(struct inode *inode, struct file *filp)
if (retval)
return retval;
+ fsi = devpts_get_ref(inode, filp);
+ retval = -ENODEV;
+ if (!fsi)
+ goto out_free_file;
+
/* find a device that is not in use. */
mutex_lock(&devpts_mutex);
- index = devpts_new_index(inode);
- if (index < 0) {
- retval = index;
- mutex_unlock(&devpts_mutex);
- goto err_file;
- }
-
+ index = devpts_new_index(fsi);
mutex_unlock(&devpts_mutex);
- mutex_lock(&tty_mutex);
- tty = tty_init_dev(ptm_driver, index);
+ retval = index;
+ if (index < 0)
+ goto out_put_ref;
- if (IS_ERR(tty)) {
- retval = PTR_ERR(tty);
- goto out;
- }
+ mutex_lock(&tty_mutex);
+ tty = tty_init_dev(ptm_driver, index);
/* The tty returned here is locked so we can safely
drop the mutex */
mutex_unlock(&tty_mutex);
- set_bit(TTY_PTY_LOCK, &tty->flags); /* LOCK THE SLAVE */
- tty->driver_data = inode;
+ retval = PTR_ERR(tty);
+ if (IS_ERR(tty))
+ goto out;
/*
- * In the case where all references to ptmx inode are dropped and we
- * still have /dev/tty opened pointing to the master/slave pair (ptmx
- * is closed/released before /dev/tty), we must make sure that the inode
- * is still valid when we call the final pty_unix98_shutdown, thus we
- * hold an additional reference to the ptmx inode. For the same /dev/tty
- * last close case, we also need to make sure the super_block isn't
- * destroyed (devpts instance unmounted), before /dev/tty is closed and
- * on its release devpts_kill_index is called.
+ * From here on out, the tty is "live", and the index and
+ * fsi will be killed/put by the tty_release()
*/
- devpts_add_ref(inode);
+ set_bit(TTY_PTY_LOCK, &tty->flags); /* LOCK THE SLAVE */
+ tty->driver_data = fsi;
tty_add_file(tty, filp);
- slave_inode = devpts_pty_new(inode,
- MKDEV(UNIX98_PTY_SLAVE_MAJOR, index), index,
- tty->link);
- if (IS_ERR(slave_inode)) {
- retval = PTR_ERR(slave_inode);
+ dentry = devpts_pty_new(fsi, index, tty->link);
+ if (IS_ERR(dentry)) {
+ retval = PTR_ERR(dentry);
goto err_release;
}
- tty->link->driver_data = slave_inode;
+ tty->link->driver_data = dentry;
retval = ptm_driver->ops->open(tty, filp);
if (retval)
@@ -793,12 +786,14 @@ static int ptmx_open(struct inode *inode, struct file *filp)
return 0;
err_release:
tty_unlock(tty);
+ // This will also put-ref the fsi
tty_release(inode, filp);
return retval;
out:
- mutex_unlock(&tty_mutex);
- devpts_kill_index(inode, index);
-err_file:
+ devpts_kill_index(fsi, index);
+out_put_ref:
+ devpts_put_ref(fsi);
+out_free_file:
tty_free_file(filp);
return retval;
}
diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index 98862aa5bb58..5eea74d7f9f4 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -1454,13 +1454,13 @@ byt_serial_setup(struct serial_private *priv,
return -EINVAL;
}
- rx_param->src_master = 1;
- rx_param->dst_master = 0;
+ rx_param->m_master = 0;
+ rx_param->p_master = 1;
dma->rxconf.src_maxburst = 16;
- tx_param->src_master = 1;
- tx_param->dst_master = 0;
+ tx_param->m_master = 0;
+ tx_param->p_master = 1;
dma->txconf.dst_maxburst = 16;
diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
index e213da01a3d7..00ad2637b08c 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -1403,9 +1403,18 @@ static void __do_stop_tx_rs485(struct uart_8250_port *p)
/*
* Empty the RX FIFO, we are not interested in anything
* received during the half-duplex transmission.
+ * Enable previously disabled RX interrupts.
*/
- if (!(p->port.rs485.flags & SER_RS485_RX_DURING_TX))
+ if (!(p->port.rs485.flags & SER_RS485_RX_DURING_TX)) {
serial8250_clear_fifos(p);
+
+ serial8250_rpm_get(p);
+
+ p->ier |= UART_IER_RLSI | UART_IER_RDI;
+ serial_port_out(&p->port, UART_IER, p->ier);
+
+ serial8250_rpm_put(p);
+ }
}
static void serial8250_em485_handle_stop_tx(unsigned long arg)
diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig
index 64742a086ae3..4d7cb9c04fce 100644
--- a/drivers/tty/serial/8250/Kconfig
+++ b/drivers/tty/serial/8250/Kconfig
@@ -324,7 +324,6 @@ config SERIAL_8250_EM
config SERIAL_8250_RT288X
bool "Ralink RT288x/RT305x/RT3662/RT3883 serial port support"
depends on SERIAL_8250
- depends on MIPS || COMPILE_TEST
default y if MIPS_ALCHEMY || SOC_RT288X || SOC_RT305X || SOC_RT3883 || SOC_MT7620
help
Selecting this option will add support for the alternate register
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 13d4ed6caac4..7711b260dacf 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -900,6 +900,27 @@ config SERIAL_SGI_L1_CONSOLE
controller serial port as your console (you want this!),
say Y. Otherwise, say N.
+config SERIAL_PIC32
+ tristate "Microchip PIC32 serial support"
+ depends on MACH_PIC32
+ select SERIAL_CORE
+ help
+ If you have a PIC32, this driver supports the serial ports.
+
+ Say Y or M to use PIC32 serial ports, otherwise say N. Note that
+ to use a serial port as a console, this must be included in kernel and
+ not as a module.
+
+config SERIAL_PIC32_CONSOLE
+ bool "PIC32 serial console support"
+ depends on SERIAL_PIC32
+ select SERIAL_CORE_CONSOLE
+ help
+ If you have a PIC32, this driver supports the putting a console on one
+ of the serial ports.
+
+ Say Y to use the PIC32 console, otherwise say N.
+
config SERIAL_MPC52xx
tristate "Freescale MPC52xx/MPC512x family PSC serial support"
depends on PPC_MPC52xx || PPC_MPC512x
diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile
index 8c261adac04e..74914aafac61 100644
--- a/drivers/tty/serial/Makefile
+++ b/drivers/tty/serial/Makefile
@@ -91,6 +91,7 @@ obj-$(CONFIG_SERIAL_MEN_Z135) += men_z135_uart.o
obj-$(CONFIG_SERIAL_SPRD) += sprd_serial.o
obj-$(CONFIG_SERIAL_STM32) += stm32-usart.o
obj-$(CONFIG_SERIAL_MVEBU_UART) += mvebu-uart.o
+obj-$(CONFIG_SERIAL_PIC32) += pic32_uart.o
# GPIOLIB helpers for modem control lines
obj-$(CONFIG_SERIAL_MCTRL_GPIO) += serial_mctrl_gpio.o
diff --git a/drivers/tty/serial/max310x.c b/drivers/tty/serial/max310x.c
index 3f98165b479c..3f6e0ab725fe 100644
--- a/drivers/tty/serial/max310x.c
+++ b/drivers/tty/serial/max310x.c
@@ -17,7 +17,7 @@
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/device.h>
-#include <linux/gpio.h>
+#include <linux/gpio/driver.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_device.h>
@@ -1036,7 +1036,7 @@ static SIMPLE_DEV_PM_OPS(max310x_pm_ops, max310x_suspend, max310x_resume);
static int max310x_gpio_get(struct gpio_chip *chip, unsigned offset)
{
unsigned int val;
- struct max310x_port *s = container_of(chip, struct max310x_port, gpio);
+ struct max310x_port *s = gpiochip_get_data(chip);
struct uart_port *port = &s->p[offset / 4].port;
val = max310x_port_read(port, MAX310X_GPIODATA_REG);
@@ -1046,7 +1046,7 @@ static int max310x_gpio_get(struct gpio_chip *chip, unsigned offset)
static void max310x_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
{
- struct max310x_port *s = container_of(chip, struct max310x_port, gpio);
+ struct max310x_port *s = gpiochip_get_data(chip);
struct uart_port *port = &s->p[offset / 4].port;
max310x_port_update(port, MAX310X_GPIODATA_REG, 1 << (offset % 4),
@@ -1055,7 +1055,7 @@ static void max310x_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
static int max310x_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
{
- struct max310x_port *s = container_of(chip, struct max310x_port, gpio);
+ struct max310x_port *s = gpiochip_get_data(chip);
struct uart_port *port = &s->p[offset / 4].port;
max310x_port_update(port, MAX310X_GPIOCFG_REG, 1 << (offset % 4), 0);
@@ -1066,7 +1066,7 @@ static int max310x_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
static int max310x_gpio_direction_output(struct gpio_chip *chip,
unsigned offset, int value)
{
- struct max310x_port *s = container_of(chip, struct max310x_port, gpio);
+ struct max310x_port *s = gpiochip_get_data(chip);
struct uart_port *port = &s->p[offset / 4].port;
max310x_port_update(port, MAX310X_GPIODATA_REG, 1 << (offset % 4),
@@ -1183,7 +1183,7 @@ static int max310x_probe(struct device *dev, struct max310x_devtype *devtype,
s->gpio.base = -1;
s->gpio.ngpio = devtype->nr * 4;
s->gpio.can_sleep = 1;
- ret = gpiochip_add(&s->gpio);
+ ret = gpiochip_add_data(&s->gpio, s);
if (ret)
goto out_uart;
#endif
diff --git a/drivers/tty/serial/pic32_uart.c b/drivers/tty/serial/pic32_uart.c
new file mode 100644
index 000000000000..62a43bf5698e
--- /dev/null
+++ b/drivers/tty/serial/pic32_uart.c
@@ -0,0 +1,960 @@
+/*
+ * PIC32 Integrated Serial Driver.
+ *
+ * Copyright (C) 2015 Microchip Technology, Inc.
+ *
+ * Authors:
+ * Sorin-Andrei Pistirica <andrei.pistirica@microchip.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_irq.h>
+#include <linux/of_gpio.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/console.h>
+#include <linux/clk.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/serial_core.h>
+#include <linux/delay.h>
+
+#include <asm/mach-pic32/pic32.h>
+#include "pic32_uart.h"
+
+/* UART name and device definitions */
+#define PIC32_DEV_NAME "pic32-uart"
+#define PIC32_MAX_UARTS 6
+#define PIC32_SDEV_NAME "ttyPIC"
+
+/* pic32_sport pointer for console use */
+static struct pic32_sport *pic32_sports[PIC32_MAX_UARTS];
+
+static inline void pic32_wait_deplete_txbuf(struct pic32_sport *sport)
+{
+ /* wait for tx empty, otherwise chars will be lost or corrupted */
+ while (!(pic32_uart_readl(sport, PIC32_UART_STA) & PIC32_UART_STA_TRMT))
+ udelay(1);
+}
+
+static inline int pic32_enable_clock(struct pic32_sport *sport)
+{
+ int ret = clk_prepare_enable(sport->clk);
+
+ if (ret)
+ return ret;
+
+ sport->ref_clk++;
+ return 0;
+}
+
+static inline void pic32_disable_clock(struct pic32_sport *sport)
+{
+ sport->ref_clk--;
+ clk_disable_unprepare(sport->clk);
+}
+
+/* serial core request to check if uart tx buffer is empty */
+static unsigned int pic32_uart_tx_empty(struct uart_port *port)
+{
+ struct pic32_sport *sport = to_pic32_sport(port);
+ u32 val = pic32_uart_readl(sport, PIC32_UART_STA);
+
+ return (val & PIC32_UART_STA_TRMT) ? 1 : 0;
+}
+
+/* serial core request to set UART outputs */
+static void pic32_uart_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+ struct pic32_sport *sport = to_pic32_sport(port);
+
+ /* set loopback mode */
+ if (mctrl & TIOCM_LOOP)
+ pic32_uart_writel(sport, PIC32_SET(PIC32_UART_MODE),
+ PIC32_UART_MODE_LPBK);
+ else
+ pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_MODE),
+ PIC32_UART_MODE_LPBK);
+}
+
+/* get the state of CTS input pin for this port */
+static unsigned int get_cts_state(struct pic32_sport *sport)
+{
+ /* read and invert UxCTS */
+ if (gpio_is_valid(sport->cts_gpio))
+ return !gpio_get_value(sport->cts_gpio);
+
+ return 1;
+}
+
+/* serial core request to return the state of misc UART input pins */
+static unsigned int pic32_uart_get_mctrl(struct uart_port *port)
+{
+ struct pic32_sport *sport = to_pic32_sport(port);
+ unsigned int mctrl = 0;
+
+ if (!sport->hw_flow_ctrl)
+ mctrl |= TIOCM_CTS;
+ else if (get_cts_state(sport))
+ mctrl |= TIOCM_CTS;
+
+ /* DSR and CD are not supported in PIC32, so return 1
+ * RI is not supported in PIC32, so return 0
+ */
+ mctrl |= TIOCM_CD;
+ mctrl |= TIOCM_DSR;
+
+ return mctrl;
+}
+
+/* stop tx and start tx are not called in pairs, therefore a flag indicates
+ * the status of irq to control the irq-depth.
+ */
+static inline void pic32_uart_irqtxen(struct pic32_sport *sport, u8 en)
+{
+ if (en && !tx_irq_enabled(sport)) {
+ enable_irq(sport->irq_tx);
+ tx_irq_enabled(sport) = 1;
+ } else if (!en && tx_irq_enabled(sport)) {
+ /* use disable_irq_nosync() and not disable_irq() to avoid self
+ * imposed deadlock by not waiting for irq handler to end,
+ * since this callback is called from interrupt context.
+ */
+ disable_irq_nosync(sport->irq_tx);
+ tx_irq_enabled(sport) = 0;
+ }
+}
+
+/* serial core request to disable tx ASAP (used for flow control) */
+static void pic32_uart_stop_tx(struct uart_port *port)
+{
+ struct pic32_sport *sport = to_pic32_sport(port);
+
+ if (!(pic32_uart_readl(sport, PIC32_UART_MODE) & PIC32_UART_MODE_ON))
+ return;
+
+ if (!(pic32_uart_readl(sport, PIC32_UART_STA) & PIC32_UART_STA_UTXEN))
+ return;
+
+ /* wait for tx empty */
+ pic32_wait_deplete_txbuf(sport);
+
+ pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_STA),
+ PIC32_UART_STA_UTXEN);
+ pic32_uart_irqtxen(sport, 0);
+}
+
+/* serial core request to (re)enable tx */
+static void pic32_uart_start_tx(struct uart_port *port)
+{
+ struct pic32_sport *sport = to_pic32_sport(port);
+
+ pic32_uart_irqtxen(sport, 1);
+ pic32_uart_writel(sport, PIC32_SET(PIC32_UART_STA),
+ PIC32_UART_STA_UTXEN);
+}
+
+/* serial core request to stop rx, called before port shutdown */
+static void pic32_uart_stop_rx(struct uart_port *port)
+{
+ struct pic32_sport *sport = to_pic32_sport(port);
+
+ /* disable rx interrupts */
+ disable_irq(sport->irq_rx);
+
+ /* receiver Enable bit OFF */
+ pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_STA),
+ PIC32_UART_STA_URXEN);
+}
+
+/* serial core request to start/stop emitting break char */
+static void pic32_uart_break_ctl(struct uart_port *port, int ctl)
+{
+ struct pic32_sport *sport = to_pic32_sport(port);
+ unsigned long flags;
+
+ spin_lock_irqsave(&port->lock, flags);
+
+ if (ctl)
+ pic32_uart_writel(sport, PIC32_SET(PIC32_UART_STA),
+ PIC32_UART_STA_UTXBRK);
+ else
+ pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_STA),
+ PIC32_UART_STA_UTXBRK);
+
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+/* get port type in string format */
+static const char *pic32_uart_type(struct uart_port *port)
+{
+ return (port->type == PORT_PIC32) ? PIC32_DEV_NAME : NULL;
+}
+
+/* read all chars in rx fifo and send them to core */
+static void pic32_uart_do_rx(struct uart_port *port)
+{
+ struct pic32_sport *sport = to_pic32_sport(port);
+ struct tty_port *tty;
+ unsigned int max_count;
+
+ /* limit number of char read in interrupt, should not be
+ * higher than fifo size anyway since we're much faster than
+ * serial port
+ */
+ max_count = PIC32_UART_RX_FIFO_DEPTH;
+
+ spin_lock(&port->lock);
+
+ tty = &port->state->port;
+
+ do {
+ u32 sta_reg, c;
+ char flag;
+
+ /* get overrun/fifo empty information from status register */
+ sta_reg = pic32_uart_readl(sport, PIC32_UART_STA);
+ if (unlikely(sta_reg & PIC32_UART_STA_OERR)) {
+
+ /* fifo reset is required to clear interrupt */
+ pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_STA),
+ PIC32_UART_STA_OERR);
+
+ port->icount.overrun++;
+ tty_insert_flip_char(tty, 0, TTY_OVERRUN);
+ }
+
+ /* Can at least one more character can be read? */
+ if (!(sta_reg & PIC32_UART_STA_URXDA))
+ break;
+
+ /* read the character and increment the rx counter */
+ c = pic32_uart_readl(sport, PIC32_UART_RX);
+
+ port->icount.rx++;
+ flag = TTY_NORMAL;
+ c &= 0xff;
+
+ if (unlikely((sta_reg & PIC32_UART_STA_PERR) ||
+ (sta_reg & PIC32_UART_STA_FERR))) {
+
+ /* do stats first */
+ if (sta_reg & PIC32_UART_STA_PERR)
+ port->icount.parity++;
+ if (sta_reg & PIC32_UART_STA_FERR)
+ port->icount.frame++;
+
+ /* update flag wrt read_status_mask */
+ sta_reg &= port->read_status_mask;
+
+ if (sta_reg & PIC32_UART_STA_FERR)
+ flag = TTY_FRAME;
+ if (sta_reg & PIC32_UART_STA_PERR)
+ flag = TTY_PARITY;
+ }
+
+ if (uart_handle_sysrq_char(port, c))
+ continue;
+
+ if ((sta_reg & port->ignore_status_mask) == 0)
+ tty_insert_flip_char(tty, c, flag);
+
+ } while (--max_count);
+
+ spin_unlock(&port->lock);
+
+ tty_flip_buffer_push(tty);
+}
+
+/* fill tx fifo with chars to send, stop when fifo is about to be full
+ * or when all chars have been sent.
+ */
+static void pic32_uart_do_tx(struct uart_port *port)
+{
+ struct pic32_sport *sport = to_pic32_sport(port);
+ struct circ_buf *xmit = &port->state->xmit;
+ unsigned int max_count = PIC32_UART_TX_FIFO_DEPTH;
+
+ if (port->x_char) {
+ pic32_uart_writel(sport, PIC32_UART_TX, port->x_char);
+ port->icount.tx++;
+ port->x_char = 0;
+ return;
+ }
+
+ if (uart_tx_stopped(port)) {
+ pic32_uart_stop_tx(port);
+ return;
+ }
+
+ if (uart_circ_empty(xmit))
+ goto txq_empty;
+
+ /* keep stuffing chars into uart tx buffer
+ * 1) until uart fifo is full
+ * or
+ * 2) until the circ buffer is empty
+ * (all chars have been sent)
+ * or
+ * 3) until the max count is reached
+ * (prevents lingering here for too long in certain cases)
+ */
+ while (!(PIC32_UART_STA_UTXBF &
+ pic32_uart_readl(sport, PIC32_UART_STA))) {
+ unsigned int c = xmit->buf[xmit->tail];
+
+ pic32_uart_writel(sport, PIC32_UART_TX, c);
+
+ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+ port->icount.tx++;
+ if (uart_circ_empty(xmit))
+ break;
+ if (--max_count == 0)
+ break;
+ }
+
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(port);
+
+ if (uart_circ_empty(xmit))
+ goto txq_empty;
+
+ return;
+
+txq_empty:
+ pic32_uart_irqtxen(sport, 0);
+}
+
+/* RX interrupt handler */
+static irqreturn_t pic32_uart_rx_interrupt(int irq, void *dev_id)
+{
+ struct uart_port *port = dev_id;
+
+ pic32_uart_do_rx(port);
+
+ return IRQ_HANDLED;
+}
+
+/* TX interrupt handler */
+static irqreturn_t pic32_uart_tx_interrupt(int irq, void *dev_id)
+{
+ struct uart_port *port = dev_id;
+ unsigned long flags;
+
+ spin_lock_irqsave(&port->lock, flags);
+ pic32_uart_do_tx(port);
+ spin_unlock_irqrestore(&port->lock, flags);
+
+ return IRQ_HANDLED;
+}
+
+/* FAULT interrupt handler */
+static irqreturn_t pic32_uart_fault_interrupt(int irq, void *dev_id)
+{
+ /* do nothing: pic32_uart_do_rx() handles faults. */
+ return IRQ_HANDLED;
+}
+
+/* enable rx & tx operation on uart */
+static void pic32_uart_en_and_unmask(struct uart_port *port)
+{
+ struct pic32_sport *sport = to_pic32_sport(port);
+
+ pic32_uart_writel(sport, PIC32_SET(PIC32_UART_STA),
+ PIC32_UART_STA_UTXEN | PIC32_UART_STA_URXEN);
+ pic32_uart_writel(sport, PIC32_SET(PIC32_UART_MODE),
+ PIC32_UART_MODE_ON);
+}
+
+/* disable rx & tx operation on uart */
+static void pic32_uart_dsbl_and_mask(struct uart_port *port)
+{
+ struct pic32_sport *sport = to_pic32_sport(port);
+
+ /* wait for tx empty, otherwise chars will be lost or corrupted */
+ pic32_wait_deplete_txbuf(sport);
+
+ pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_STA),
+ PIC32_UART_STA_UTXEN | PIC32_UART_STA_URXEN);
+ pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_MODE),
+ PIC32_UART_MODE_ON);
+}
+
+/* serial core request to initialize uart and start rx operation */
+static int pic32_uart_startup(struct uart_port *port)
+{
+ struct pic32_sport *sport = to_pic32_sport(port);
+ u32 dflt_baud = (port->uartclk / PIC32_UART_DFLT_BRATE / 16) - 1;
+ unsigned long flags;
+ int ret;
+
+ local_irq_save(flags);
+
+ ret = pic32_enable_clock(sport);
+ if (ret) {
+ local_irq_restore(flags);
+ goto out_done;
+ }
+
+ /* clear status and mode registers */
+ pic32_uart_writel(sport, PIC32_UART_MODE, 0);
+ pic32_uart_writel(sport, PIC32_UART_STA, 0);
+
+ /* disable uart and mask all interrupts */
+ pic32_uart_dsbl_and_mask(port);
+
+ /* set default baud */
+ pic32_uart_writel(sport, PIC32_UART_BRG, dflt_baud);
+
+ local_irq_restore(flags);
+
+ /* Each UART of a PIC32 has three interrupts therefore,
+ * we setup driver to register the 3 irqs for the device.
+ *
+ * For each irq request_irq() is called with interrupt disabled.
+ * And the irq is enabled as soon as we are ready to handle them.
+ */
+ tx_irq_enabled(sport) = 0;
+
+ sport->irq_fault_name = kasprintf(GFP_KERNEL, "%s%d-fault",
+ pic32_uart_type(port),
+ sport->idx);
+ if (!sport->irq_fault_name) {
+ dev_err(port->dev, "%s: kasprintf err!", __func__);
+ ret = -ENOMEM;
+ goto out_done;
+ }
+ irq_set_status_flags(sport->irq_fault, IRQ_NOAUTOEN);
+ ret = request_irq(sport->irq_fault, pic32_uart_fault_interrupt,
+ sport->irqflags_fault, sport->irq_fault_name, port);
+ if (ret) {
+ dev_err(port->dev, "%s: request irq(%d) err! ret:%d name:%s\n",
+ __func__, sport->irq_fault, ret,
+ pic32_uart_type(port));
+ goto out_f;
+ }
+
+ sport->irq_rx_name = kasprintf(GFP_KERNEL, "%s%d-rx",
+ pic32_uart_type(port),
+ sport->idx);
+ if (!sport->irq_rx_name) {
+ dev_err(port->dev, "%s: kasprintf err!", __func__);
+ kfree(sport->irq_fault_name);
+ ret = -ENOMEM;
+ goto out_f;
+ }
+ irq_set_status_flags(sport->irq_rx, IRQ_NOAUTOEN);
+ ret = request_irq(sport->irq_rx, pic32_uart_rx_interrupt,
+ sport->irqflags_rx, sport->irq_rx_name, port);
+ if (ret) {
+ dev_err(port->dev, "%s: request irq(%d) err! ret:%d name:%s\n",
+ __func__, sport->irq_rx, ret,
+ pic32_uart_type(port));
+ goto out_r;
+ }
+
+ sport->irq_tx_name = kasprintf(GFP_KERNEL, "%s%d-tx",
+ pic32_uart_type(port),
+ sport->idx);
+ if (!sport->irq_tx_name) {
+ dev_err(port->dev, "%s: kasprintf err!", __func__);
+ ret = -ENOMEM;
+ goto out_r;
+ }
+ irq_set_status_flags(sport->irq_tx, IRQ_NOAUTOEN);
+ ret = request_irq(sport->irq_tx, pic32_uart_tx_interrupt,
+ sport->irqflags_tx, sport->irq_tx_name, port);
+ if (ret) {
+ dev_err(port->dev, "%s: request irq(%d) err! ret:%d name:%s\n",
+ __func__, sport->irq_tx, ret,
+ pic32_uart_type(port));
+ goto out_t;
+ }
+
+ local_irq_save(flags);
+
+ /* set rx interrupt on first receive */
+ pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_STA),
+ PIC32_UART_STA_URXISEL1 | PIC32_UART_STA_URXISEL0);
+
+ /* set interrupt on empty */
+ pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_STA),
+ PIC32_UART_STA_UTXISEL1);
+
+ /* enable all interrupts and eanable uart */
+ pic32_uart_en_and_unmask(port);
+
+ enable_irq(sport->irq_rx);
+
+ return 0;
+
+out_t:
+ kfree(sport->irq_tx_name);
+ free_irq(sport->irq_tx, sport);
+out_r:
+ kfree(sport->irq_rx_name);
+ free_irq(sport->irq_rx, sport);
+out_f:
+ kfree(sport->irq_fault_name);
+ free_irq(sport->irq_fault, sport);
+out_done:
+ return ret;
+}
+
+/* serial core request to flush & disable uart */
+static void pic32_uart_shutdown(struct uart_port *port)
+{
+ struct pic32_sport *sport = to_pic32_sport(port);
+ unsigned long flags;
+
+ /* disable uart */
+ spin_lock_irqsave(&port->lock, flags);
+ pic32_uart_dsbl_and_mask(port);
+ spin_unlock_irqrestore(&port->lock, flags);
+ pic32_disable_clock(sport);
+
+ /* free all 3 interrupts for this UART */
+ free_irq(sport->irq_fault, port);
+ free_irq(sport->irq_tx, port);
+ free_irq(sport->irq_rx, port);
+}
+
+/* serial core request to change current uart setting */
+static void pic32_uart_set_termios(struct uart_port *port,
+ struct ktermios *new,
+ struct ktermios *old)
+{
+ struct pic32_sport *sport = to_pic32_sport(port);
+ unsigned int baud;
+ unsigned int quot;
+ unsigned long flags;
+
+ spin_lock_irqsave(&port->lock, flags);
+
+ /* disable uart and mask all interrupts while changing speed */
+ pic32_uart_dsbl_and_mask(port);
+
+ /* stop bit options */
+ if (new->c_cflag & CSTOPB)
+ pic32_uart_writel(sport, PIC32_SET(PIC32_UART_MODE),
+ PIC32_UART_MODE_STSEL);
+ else
+ pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_MODE),
+ PIC32_UART_MODE_STSEL);
+
+ /* parity options */
+ if (new->c_cflag & PARENB) {
+ if (new->c_cflag & PARODD) {
+ pic32_uart_writel(sport, PIC32_SET(PIC32_UART_MODE),
+ PIC32_UART_MODE_PDSEL1);
+ pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_MODE),
+ PIC32_UART_MODE_PDSEL0);
+ } else {
+ pic32_uart_writel(sport, PIC32_SET(PIC32_UART_MODE),
+ PIC32_UART_MODE_PDSEL0);
+ pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_MODE),
+ PIC32_UART_MODE_PDSEL1);
+ }
+ } else {
+ pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_MODE),
+ PIC32_UART_MODE_PDSEL1 |
+ PIC32_UART_MODE_PDSEL0);
+ }
+ /* if hw flow ctrl, then the pins must be specified in device tree */
+ if ((new->c_cflag & CRTSCTS) && sport->hw_flow_ctrl) {
+ /* enable hardware flow control */
+ pic32_uart_writel(sport, PIC32_SET(PIC32_UART_MODE),
+ PIC32_UART_MODE_UEN1);
+ pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_MODE),
+ PIC32_UART_MODE_UEN0);
+ pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_MODE),
+ PIC32_UART_MODE_RTSMD);
+ } else {
+ /* disable hardware flow control */
+ pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_MODE),
+ PIC32_UART_MODE_UEN1);
+ pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_MODE),
+ PIC32_UART_MODE_UEN0);
+ pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_MODE),
+ PIC32_UART_MODE_RTSMD);
+ }
+
+ /* Always 8-bit */
+ new->c_cflag |= CS8;
+
+ /* Mark/Space parity is not supported */
+ new->c_cflag &= ~CMSPAR;
+
+ /* update baud */
+ baud = uart_get_baud_rate(port, new, old, 0, port->uartclk / 16);
+ quot = uart_get_divisor(port, baud) - 1;
+ pic32_uart_writel(sport, PIC32_UART_BRG, quot);
+ uart_update_timeout(port, new->c_cflag, baud);
+
+ if (tty_termios_baud_rate(new))
+ tty_termios_encode_baud_rate(new, baud, baud);
+
+ /* enable uart */
+ pic32_uart_en_and_unmask(port);
+
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+/* serial core request to claim uart iomem */
+static int pic32_uart_request_port(struct uart_port *port)
+{
+ struct platform_device *pdev = to_platform_device(port->dev);
+ struct resource *res_mem;
+
+ res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (unlikely(!res_mem))
+ return -EINVAL;
+
+ if (!request_mem_region(port->mapbase, resource_size(res_mem),
+ "pic32_uart_mem"))
+ return -EBUSY;
+
+ port->membase = devm_ioremap_nocache(port->dev, port->mapbase,
+ resource_size(res_mem));
+ if (!port->membase) {
+ dev_err(port->dev, "Unable to map registers\n");
+ release_mem_region(port->mapbase, resource_size(res_mem));
+ return -ENOMEM;
+ }
+
+ return 0;
+}
+
+/* serial core request to release uart iomem */
+static void pic32_uart_release_port(struct uart_port *port)
+{
+ struct platform_device *pdev = to_platform_device(port->dev);
+ struct resource *res_mem;
+ unsigned int res_size;
+
+ res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (unlikely(!res_mem))
+ return;
+ res_size = resource_size(res_mem);
+
+ release_mem_region(port->mapbase, res_size);
+}
+
+/* serial core request to do any port required auto-configuration */
+static void pic32_uart_config_port(struct uart_port *port, int flags)
+{
+ if (flags & UART_CONFIG_TYPE) {
+ if (pic32_uart_request_port(port))
+ return;
+ port->type = PORT_PIC32;
+ }
+}
+
+/* serial core request to check that port information in serinfo are suitable */
+static int pic32_uart_verify_port(struct uart_port *port,
+ struct serial_struct *serinfo)
+{
+ if (port->type != PORT_PIC32)
+ return -EINVAL;
+ if (port->irq != serinfo->irq)
+ return -EINVAL;
+ if (port->iotype != serinfo->io_type)
+ return -EINVAL;
+ if (port->mapbase != (unsigned long)serinfo->iomem_base)
+ return -EINVAL;
+
+ return 0;
+}
+
+/* serial core callbacks */
+static const struct uart_ops pic32_uart_ops = {
+ .tx_empty = pic32_uart_tx_empty,
+ .get_mctrl = pic32_uart_get_mctrl,
+ .set_mctrl = pic32_uart_set_mctrl,
+ .start_tx = pic32_uart_start_tx,
+ .stop_tx = pic32_uart_stop_tx,
+ .stop_rx = pic32_uart_stop_rx,
+ .break_ctl = pic32_uart_break_ctl,
+ .startup = pic32_uart_startup,
+ .shutdown = pic32_uart_shutdown,
+ .set_termios = pic32_uart_set_termios,
+ .type = pic32_uart_type,
+ .release_port = pic32_uart_release_port,
+ .request_port = pic32_uart_request_port,
+ .config_port = pic32_uart_config_port,
+ .verify_port = pic32_uart_verify_port,
+};
+
+#ifdef CONFIG_SERIAL_PIC32_CONSOLE
+/* output given char */
+static void pic32_console_putchar(struct uart_port *port, int ch)
+{
+ struct pic32_sport *sport = to_pic32_sport(port);
+
+ if (!(pic32_uart_readl(sport, PIC32_UART_MODE) & PIC32_UART_MODE_ON))
+ return;
+
+ if (!(pic32_uart_readl(sport, PIC32_UART_STA) & PIC32_UART_STA_UTXEN))
+ return;
+
+ /* wait for tx empty */
+ pic32_wait_deplete_txbuf(sport);
+
+ pic32_uart_writel(sport, PIC32_UART_TX, ch & 0xff);
+}
+
+/* console core request to output given string */
+static void pic32_console_write(struct console *co, const char *s,
+ unsigned int count)
+{
+ struct pic32_sport *sport = pic32_sports[co->index];
+ struct uart_port *port = pic32_get_port(sport);
+
+ /* call uart helper to deal with \r\n */
+ uart_console_write(port, s, count, pic32_console_putchar);
+}
+
+/* console core request to setup given console, find matching uart
+ * port and setup it.
+ */
+static int pic32_console_setup(struct console *co, char *options)
+{
+ struct pic32_sport *sport;
+ struct uart_port *port = NULL;
+ int baud = 115200;
+ int bits = 8;
+ int parity = 'n';
+ int flow = 'n';
+ int ret = 0;
+
+ if (unlikely(co->index < 0 || co->index >= PIC32_MAX_UARTS))
+ return -ENODEV;
+
+ sport = pic32_sports[co->index];
+ if (!sport)
+ return -ENODEV;
+ port = pic32_get_port(sport);
+
+ ret = pic32_enable_clock(sport);
+ if (ret)
+ return ret;
+
+ if (options)
+ uart_parse_options(options, &baud, &parity, &bits, &flow);
+
+ return uart_set_options(port, co, baud, parity, bits, flow);
+}
+
+static struct uart_driver pic32_uart_driver;
+static struct console pic32_console = {
+ .name = PIC32_SDEV_NAME,
+ .write = pic32_console_write,
+ .device = uart_console_device,
+ .setup = pic32_console_setup,
+ .flags = CON_PRINTBUFFER,
+ .index = -1,
+ .data = &pic32_uart_driver,
+};
+#define PIC32_SCONSOLE (&pic32_console)
+
+static int __init pic32_console_init(void)
+{
+ register_console(&pic32_console);
+ return 0;
+}
+console_initcall(pic32_console_init);
+
+static inline bool is_pic32_console_port(struct uart_port *port)
+{
+ return port->cons && port->cons->index == port->line;
+}
+
+/*
+ * Late console initialization.
+ */
+static int __init pic32_late_console_init(void)
+{
+ if (!(pic32_console.flags & CON_ENABLED))
+ register_console(&pic32_console);
+
+ return 0;
+}
+
+core_initcall(pic32_late_console_init);
+
+#else
+#define PIC32_SCONSOLE NULL
+#endif
+
+static struct uart_driver pic32_uart_driver = {
+ .owner = THIS_MODULE,
+ .driver_name = PIC32_DEV_NAME,
+ .dev_name = PIC32_SDEV_NAME,
+ .nr = PIC32_MAX_UARTS,
+ .cons = PIC32_SCONSOLE,
+};
+
+static int pic32_uart_probe(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ struct pic32_sport *sport;
+ int uart_idx = 0;
+ struct resource *res_mem;
+ struct uart_port *port;
+ int ret;
+
+ uart_idx = of_alias_get_id(np, "serial");
+ if (uart_idx < 0 || uart_idx >= PIC32_MAX_UARTS)
+ return -EINVAL;
+
+ res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res_mem)
+ return -EINVAL;
+
+ sport = devm_kzalloc(&pdev->dev, sizeof(*sport), GFP_KERNEL);
+ if (!sport)
+ return -ENOMEM;
+
+ sport->idx = uart_idx;
+ sport->irq_fault = irq_of_parse_and_map(np, 0);
+ sport->irqflags_fault = IRQF_NO_THREAD;
+ sport->irq_rx = irq_of_parse_and_map(np, 1);
+ sport->irqflags_rx = IRQF_NO_THREAD;
+ sport->irq_tx = irq_of_parse_and_map(np, 2);
+ sport->irqflags_tx = IRQF_NO_THREAD;
+ sport->clk = devm_clk_get(&pdev->dev, NULL);
+ sport->cts_gpio = -EINVAL;
+ sport->dev = &pdev->dev;
+
+ /* Hardware flow control: gpios
+ * !Note: Basically, CTS is needed for reading the status.
+ */
+ sport->hw_flow_ctrl = false;
+ sport->cts_gpio = of_get_named_gpio(np, "cts-gpios", 0);
+ if (gpio_is_valid(sport->cts_gpio)) {
+ sport->hw_flow_ctrl = true;
+
+ ret = devm_gpio_request(sport->dev,
+ sport->cts_gpio, "CTS");
+ if (ret) {
+ dev_err(&pdev->dev,
+ "error requesting CTS GPIO\n");
+ goto err;
+ }
+
+ ret = gpio_direction_input(sport->cts_gpio);
+ if (ret) {
+ dev_err(&pdev->dev, "error setting CTS GPIO\n");
+ goto err;
+ }
+ }
+
+ pic32_sports[uart_idx] = sport;
+ port = &sport->port;
+ memset(port, 0, sizeof(*port));
+ port->iotype = UPIO_MEM;
+ port->mapbase = res_mem->start;
+ port->ops = &pic32_uart_ops;
+ port->flags = UPF_BOOT_AUTOCONF;
+ port->dev = &pdev->dev;
+ port->fifosize = PIC32_UART_TX_FIFO_DEPTH;
+ port->uartclk = clk_get_rate(sport->clk);
+ port->line = uart_idx;
+
+ ret = uart_add_one_port(&pic32_uart_driver, port);
+ if (ret) {
+ port->membase = NULL;
+ dev_err(port->dev, "%s: uart add port error!\n", __func__);
+ goto err;
+ }
+
+#ifdef CONFIG_SERIAL_PIC32_CONSOLE
+ if (is_pic32_console_port(port) &&
+ (pic32_console.flags & CON_ENABLED)) {
+ /* The peripheral clock has been enabled by console_setup,
+ * so disable it till the port is used.
+ */
+ pic32_disable_clock(sport);
+ }
+#endif
+
+ platform_set_drvdata(pdev, port);
+
+ dev_info(&pdev->dev, "%s: uart(%d) driver initialized.\n",
+ __func__, uart_idx);
+
+ return 0;
+err:
+ /* automatic unroll of sport and gpios */
+ return ret;
+}
+
+static int pic32_uart_remove(struct platform_device *pdev)
+{
+ struct uart_port *port = platform_get_drvdata(pdev);
+ struct pic32_sport *sport = to_pic32_sport(port);
+
+ uart_remove_one_port(&pic32_uart_driver, port);
+ pic32_disable_clock(sport);
+ platform_set_drvdata(pdev, NULL);
+ pic32_sports[sport->idx] = NULL;
+
+ /* automatic unroll of sport and gpios */
+ return 0;
+}
+
+static const struct of_device_id pic32_serial_dt_ids[] = {
+ { .compatible = "microchip,pic32mzda-uart" },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, pic32_serial_dt_ids);
+
+static struct platform_driver pic32_uart_platform_driver = {
+ .probe = pic32_uart_probe,
+ .remove = pic32_uart_remove,
+ .driver = {
+ .name = PIC32_DEV_NAME,
+ .of_match_table = of_match_ptr(pic32_serial_dt_ids),
+ },
+};
+
+static int __init pic32_uart_init(void)
+{
+ int ret;
+
+ ret = uart_register_driver(&pic32_uart_driver);
+ if (ret) {
+ pr_err("failed to register %s:%d\n",
+ pic32_uart_driver.driver_name, ret);
+ return ret;
+ }
+
+ ret = platform_driver_register(&pic32_uart_platform_driver);
+ if (ret) {
+ pr_err("fail to register pic32 uart\n");
+ uart_unregister_driver(&pic32_uart_driver);
+ }
+
+ return ret;
+}
+arch_initcall(pic32_uart_init);
+
+static void __exit pic32_uart_exit(void)
+{
+#ifdef CONFIG_SERIAL_PIC32_CONSOLE
+ unregister_console(&pic32_console);
+#endif
+ platform_driver_unregister(&pic32_uart_platform_driver);
+ uart_unregister_driver(&pic32_uart_driver);
+}
+module_exit(pic32_uart_exit);
+
+MODULE_AUTHOR("Sorin-Andrei Pistirica <andrei.pistirica@microchip.com>");
+MODULE_DESCRIPTION("Microchip PIC32 integrated serial port driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/tty/serial/pic32_uart.h b/drivers/tty/serial/pic32_uart.h
new file mode 100644
index 000000000000..ec379da55ebb
--- /dev/null
+++ b/drivers/tty/serial/pic32_uart.h
@@ -0,0 +1,126 @@
+/*
+ * PIC32 Integrated Serial Driver.
+ *
+ * Copyright (C) 2015 Microchip Technology, Inc.
+ *
+ * Authors:
+ * Sorin-Andrei Pistirica <andrei.pistirica@microchip.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+#ifndef __DT_PIC32_UART_H__
+#define __DT_PIC32_UART_H__
+
+#define PIC32_UART_DFLT_BRATE (9600)
+#define PIC32_UART_TX_FIFO_DEPTH (8)
+#define PIC32_UART_RX_FIFO_DEPTH (8)
+
+#define PIC32_UART_MODE 0x00
+#define PIC32_UART_STA 0x10
+#define PIC32_UART_TX 0x20
+#define PIC32_UART_RX 0x30
+#define PIC32_UART_BRG 0x40
+
+struct pic32_console_opt {
+ int baud;
+ int parity;
+ int bits;
+ int flow;
+};
+
+/* struct pic32_sport - pic32 serial port descriptor
+ * @port: uart port descriptor
+ * @idx: port index
+ * @irq_fault: virtual fault interrupt number
+ * @irqflags_fault: flags related to fault irq
+ * @irq_fault_name: irq fault name
+ * @irq_rx: virtual rx interrupt number
+ * @irqflags_rx: flags related to rx irq
+ * @irq_rx_name: irq rx name
+ * @irq_tx: virtual tx interrupt number
+ * @irqflags_tx: : flags related to tx irq
+ * @irq_tx_name: irq tx name
+ * @cts_gpio: clear to send gpio
+ * @dev: device descriptor
+ **/
+struct pic32_sport {
+ struct uart_port port;
+ struct pic32_console_opt opt;
+ int idx;
+
+ int irq_fault;
+ int irqflags_fault;
+ const char *irq_fault_name;
+ int irq_rx;
+ int irqflags_rx;
+ const char *irq_rx_name;
+ int irq_tx;
+ int irqflags_tx;
+ const char *irq_tx_name;
+ u8 enable_tx_irq;
+
+ bool hw_flow_ctrl;
+ int cts_gpio;
+
+ int ref_clk;
+ struct clk *clk;
+
+ struct device *dev;
+};
+#define to_pic32_sport(c) container_of(c, struct pic32_sport, port)
+#define pic32_get_port(sport) (&sport->port)
+#define pic32_get_opt(sport) (&sport->opt)
+#define tx_irq_enabled(sport) (sport->enable_tx_irq)
+
+static inline void pic32_uart_writel(struct pic32_sport *sport,
+ u32 reg, u32 val)
+{
+ struct uart_port *port = pic32_get_port(sport);
+
+ __raw_writel(val, port->membase + reg);
+}
+
+static inline u32 pic32_uart_readl(struct pic32_sport *sport, u32 reg)
+{
+ struct uart_port *port = pic32_get_port(sport);
+
+ return __raw_readl(port->membase + reg);
+}
+
+/* pic32 uart mode register bits */
+#define PIC32_UART_MODE_ON BIT(15)
+#define PIC32_UART_MODE_FRZ BIT(14)
+#define PIC32_UART_MODE_SIDL BIT(13)
+#define PIC32_UART_MODE_IREN BIT(12)
+#define PIC32_UART_MODE_RTSMD BIT(11)
+#define PIC32_UART_MODE_RESV1 BIT(10)
+#define PIC32_UART_MODE_UEN1 BIT(9)
+#define PIC32_UART_MODE_UEN0 BIT(8)
+#define PIC32_UART_MODE_WAKE BIT(7)
+#define PIC32_UART_MODE_LPBK BIT(6)
+#define PIC32_UART_MODE_ABAUD BIT(5)
+#define PIC32_UART_MODE_RXINV BIT(4)
+#define PIC32_UART_MODE_BRGH BIT(3)
+#define PIC32_UART_MODE_PDSEL1 BIT(2)
+#define PIC32_UART_MODE_PDSEL0 BIT(1)
+#define PIC32_UART_MODE_STSEL BIT(0)
+
+/* pic32 uart status register bits */
+#define PIC32_UART_STA_UTXISEL1 BIT(15)
+#define PIC32_UART_STA_UTXISEL0 BIT(14)
+#define PIC32_UART_STA_UTXINV BIT(13)
+#define PIC32_UART_STA_URXEN BIT(12)
+#define PIC32_UART_STA_UTXBRK BIT(11)
+#define PIC32_UART_STA_UTXEN BIT(10)
+#define PIC32_UART_STA_UTXBF BIT(9)
+#define PIC32_UART_STA_TRMT BIT(8)
+#define PIC32_UART_STA_URXISEL1 BIT(7)
+#define PIC32_UART_STA_URXISEL0 BIT(6)
+#define PIC32_UART_STA_ADDEN BIT(5)
+#define PIC32_UART_STA_RIDLE BIT(4)
+#define PIC32_UART_STA_PERR BIT(3)
+#define PIC32_UART_STA_FERR BIT(2)
+#define PIC32_UART_STA_OERR BIT(1)
+#define PIC32_UART_STA_URXDA BIT(0)
+
+#endif /* __DT_PIC32_UART_H__ */
diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c
index 025a4264430e..e6393619405a 100644
--- a/drivers/tty/serial/sc16is7xx.c
+++ b/drivers/tty/serial/sc16is7xx.c
@@ -17,7 +17,7 @@
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/device.h>
-#include <linux/gpio.h>
+#include <linux/gpio/driver.h>
#include <linux/i2c.h>
#include <linux/module.h>
#include <linux/of.h>
@@ -1104,8 +1104,7 @@ static const struct uart_ops sc16is7xx_ops = {
static int sc16is7xx_gpio_get(struct gpio_chip *chip, unsigned offset)
{
unsigned int val;
- struct sc16is7xx_port *s = container_of(chip, struct sc16is7xx_port,
- gpio);
+ struct sc16is7xx_port *s = gpiochip_get_data(chip);
struct uart_port *port = &s->p[0].port;
val = sc16is7xx_port_read(port, SC16IS7XX_IOSTATE_REG);
@@ -1115,8 +1114,7 @@ static int sc16is7xx_gpio_get(struct gpio_chip *chip, unsigned offset)
static void sc16is7xx_gpio_set(struct gpio_chip *chip, unsigned offset, int val)
{
- struct sc16is7xx_port *s = container_of(chip, struct sc16is7xx_port,
- gpio);
+ struct sc16is7xx_port *s = gpiochip_get_data(chip);
struct uart_port *port = &s->p[0].port;
sc16is7xx_port_update(port, SC16IS7XX_IOSTATE_REG, BIT(offset),
@@ -1126,8 +1124,7 @@ static void sc16is7xx_gpio_set(struct gpio_chip *chip, unsigned offset, int val)
static int sc16is7xx_gpio_direction_input(struct gpio_chip *chip,
unsigned offset)
{
- struct sc16is7xx_port *s = container_of(chip, struct sc16is7xx_port,
- gpio);
+ struct sc16is7xx_port *s = gpiochip_get_data(chip);
struct uart_port *port = &s->p[0].port;
sc16is7xx_port_update(port, SC16IS7XX_IODIR_REG, BIT(offset), 0);
@@ -1138,8 +1135,7 @@ static int sc16is7xx_gpio_direction_input(struct gpio_chip *chip,
static int sc16is7xx_gpio_direction_output(struct gpio_chip *chip,
unsigned offset, int val)
{
- struct sc16is7xx_port *s = container_of(chip, struct sc16is7xx_port,
- gpio);
+ struct sc16is7xx_port *s = gpiochip_get_data(chip);
struct uart_port *port = &s->p[0].port;
sc16is7xx_port_update(port, SC16IS7XX_IOSTATE_REG, BIT(offset),
@@ -1210,7 +1206,7 @@ static int sc16is7xx_probe(struct device *dev,
s->gpio.base = -1;
s->gpio.ngpio = devtype->nr_gpio;
s->gpio.can_sleep = 1;
- ret = gpiochip_add(&s->gpio);
+ ret = gpiochip_add_data(&s->gpio, s);
if (ret)
goto out_thread;
}
diff --git a/drivers/tty/serial/serial_mctrl_gpio.h b/drivers/tty/serial/serial_mctrl_gpio.h
index 9716db283290..bcfad5d1db61 100644
--- a/drivers/tty/serial/serial_mctrl_gpio.h
+++ b/drivers/tty/serial/serial_mctrl_gpio.h
@@ -62,7 +62,7 @@ struct gpio_desc *mctrl_gpio_to_gpiod(struct mctrl_gpios *gpios,
enum mctrl_gpio_idx gidx);
/*
- * Request and set direction of modem control lines GPIOs and sets up irq
+ * Request and set direction of modem control line GPIOs and set up irq
* handling.
* devm_* functions are used, so there's no need to call mctrl_gpio_free().
* Returns a pointer to the allocated mctrl structure if ok, -ENOMEM on
@@ -71,7 +71,7 @@ struct gpio_desc *mctrl_gpio_to_gpiod(struct mctrl_gpios *gpios,
struct mctrl_gpios *mctrl_gpio_init(struct uart_port *port, unsigned int idx);
/*
- * Request and set direction of modem control lines GPIOs.
+ * Request and set direction of modem control line GPIOs.
* devm_* functions are used, so there's no need to call mctrl_gpio_free().
* Returns a pointer to the allocated mctrl structure if ok, -ENOMEM on
* allocation error.
diff --git a/drivers/tty/serial/uartlite.c b/drivers/tty/serial/uartlite.c
index c9fdfc8bf47f..d08baa668d5d 100644
--- a/drivers/tty/serial/uartlite.c
+++ b/drivers/tty/serial/uartlite.c
@@ -72,7 +72,7 @@ static void uartlite_outbe32(u32 val, void __iomem *addr)
iowrite32be(val, addr);
}
-static const struct uartlite_reg_ops uartlite_be = {
+static struct uartlite_reg_ops uartlite_be = {
.in = uartlite_inbe32,
.out = uartlite_outbe32,
};
@@ -87,21 +87,21 @@ static void uartlite_outle32(u32 val, void __iomem *addr)
iowrite32(val, addr);
}
-static const struct uartlite_reg_ops uartlite_le = {
+static struct uartlite_reg_ops uartlite_le = {
.in = uartlite_inle32,
.out = uartlite_outle32,
};
static inline u32 uart_in32(u32 offset, struct uart_port *port)
{
- const struct uartlite_reg_ops *reg_ops = port->private_data;
+ struct uartlite_reg_ops *reg_ops = port->private_data;
return reg_ops->in(port->membase + offset);
}
static inline void uart_out32(u32 val, u32 offset, struct uart_port *port)
{
- const struct uartlite_reg_ops *reg_ops = port->private_data;
+ struct uartlite_reg_ops *reg_ops = port->private_data;
reg_ops->out(val, port->membase + offset);
}
diff --git a/drivers/tty/synclink.c b/drivers/tty/synclink.c
index f5476e270734..c8c760151094 100644
--- a/drivers/tty/synclink.c
+++ b/drivers/tty/synclink.c
@@ -7708,7 +7708,7 @@ static netdev_tx_t hdlcdev_xmit(struct sk_buff *skb,
dev_kfree_skb(skb);
/* save start time for transmit timeout detection */
- dev->trans_start = jiffies;
+ netif_trans_update(dev);
/* start hardware transmitter if necessary */
spin_lock_irqsave(&info->irq_spinlock,flags);
@@ -7764,7 +7764,7 @@ static int hdlcdev_open(struct net_device *dev)
mgsl_program_hw(info);
/* enable network layer transmit */
- dev->trans_start = jiffies;
+ netif_trans_update(dev);
netif_start_queue(dev);
/* inform generic HDLC layer of current DCD status */
diff --git a/drivers/tty/synclink_gt.c b/drivers/tty/synclink_gt.c
index c0a2f5a1b1c2..d5b6471bece4 100644
--- a/drivers/tty/synclink_gt.c
+++ b/drivers/tty/synclink_gt.c
@@ -1493,7 +1493,7 @@ static netdev_tx_t hdlcdev_xmit(struct sk_buff *skb,
dev->stats.tx_bytes += skb->len;
/* save start time for transmit timeout detection */
- dev->trans_start = jiffies;
+ netif_trans_update(dev);
spin_lock_irqsave(&info->lock, flags);
tx_load(info, skb->data, skb->len);
@@ -1552,7 +1552,7 @@ static int hdlcdev_open(struct net_device *dev)
program_hw(info);
/* enable network layer transmit */
- dev->trans_start = jiffies;
+ netif_trans_update(dev);
netif_start_queue(dev);
/* inform generic HDLC layer of current DCD status */
diff --git a/drivers/tty/synclinkmp.c b/drivers/tty/synclinkmp.c
index 90da0c712262..3f8968543af0 100644
--- a/drivers/tty/synclinkmp.c
+++ b/drivers/tty/synclinkmp.c
@@ -1612,7 +1612,7 @@ static netdev_tx_t hdlcdev_xmit(struct sk_buff *skb,
dev_kfree_skb(skb);
/* save start time for transmit timeout detection */
- dev->trans_start = jiffies;
+ netif_trans_update(dev);
/* start hardware transmitter if necessary */
spin_lock_irqsave(&info->lock,flags);
@@ -1668,7 +1668,7 @@ static int hdlcdev_open(struct net_device *dev)
program_hw(info);
/* enable network layer transmit */
- dev->trans_start = jiffies;
+ netif_trans_update(dev);
netif_start_queue(dev);
/* inform generic HDLC layer of current DCD status */
diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c
index 9b04d72e752e..24d5491ef0da 100644
--- a/drivers/tty/tty_io.c
+++ b/drivers/tty/tty_io.c
@@ -1367,12 +1367,12 @@ static ssize_t tty_line_name(struct tty_driver *driver, int index, char *p)
* Locking: tty_mutex must be held. If the tty is found, bump the tty kref.
*/
static struct tty_struct *tty_driver_lookup_tty(struct tty_driver *driver,
- struct inode *inode, int idx)
+ struct file *file, int idx)
{
struct tty_struct *tty;
if (driver->ops->lookup)
- tty = driver->ops->lookup(driver, inode, idx);
+ tty = driver->ops->lookup(driver, file, idx);
else
tty = driver->ttys[idx];
@@ -2040,7 +2040,7 @@ static struct tty_struct *tty_open_by_driver(dev_t device, struct inode *inode,
}
/* check whether we're reopening an existing tty */
- tty = tty_driver_lookup_tty(driver, inode, index);
+ tty = tty_driver_lookup_tty(driver, filp, index);
if (IS_ERR(tty)) {
mutex_unlock(&tty_mutex);
goto out;
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-23 06:50:47 +0300