summaryrefslogtreecommitdiff
path: root/drivers/tty
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/tty')
-rw-r--r--drivers/tty/Kconfig6
-rw-r--r--drivers/tty/goldfish.c2
-rw-r--r--drivers/tty/isicom.c6
-rw-r--r--drivers/tty/moxa.c17
-rw-r--r--drivers/tty/moxa.h2
-rw-r--r--drivers/tty/n_gsm.c2
-rw-r--r--drivers/tty/serdev/core.c31
-rw-r--r--drivers/tty/serdev/serdev-ttyport.c8
-rw-r--r--drivers/tty/serial/8250/8250_dw.c3
-rw-r--r--drivers/tty/serial/8250/8250_omap.c2
-rw-r--r--drivers/tty/serial/8250/Kconfig1
-rw-r--r--drivers/tty/serial/Kconfig14
-rw-r--r--drivers/tty/serial/amba-pl011.c12
-rw-r--r--drivers/tty/serial/atmel_serial.c2
-rw-r--r--drivers/tty/serial/fsl_lpuart.c15
-rw-r--r--drivers/tty/serial/imx.c47
-rw-r--r--drivers/tty/serial/max310x.c245
-rw-r--r--drivers/tty/serial/meson_uart.c31
-rw-r--r--drivers/tty/serial/mxs-auart.c8
-rw-r--r--drivers/tty/serial/omap-serial.c11
-rw-r--r--drivers/tty/serial/serial_core.c28
-rw-r--r--drivers/tty/serial/stm32-usart.h2
-rw-r--r--drivers/tty/tty_io.c2
-rw-r--r--drivers/tty/vt/selection.c6
24 files changed, 303 insertions, 200 deletions
diff --git a/drivers/tty/Kconfig b/drivers/tty/Kconfig
index cc2b4d9433ed..b811442c5ce6 100644
--- a/drivers/tty/Kconfig
+++ b/drivers/tty/Kconfig
@@ -394,10 +394,14 @@ config GOLDFISH_TTY
depends on GOLDFISH
select SERIAL_CORE
select SERIAL_CORE_CONSOLE
- select SERIAL_EARLYCON
help
Console and system TTY driver for the Goldfish virtual platform.
+config GOLDFISH_TTY_EARLY_CONSOLE
+ bool
+ default y if GOLDFISH_TTY=y
+ select SERIAL_EARLYCON
+
config DA_TTY
bool "DA TTY"
depends on METAG_DA
diff --git a/drivers/tty/goldfish.c b/drivers/tty/goldfish.c
index 7f657bb5113c..1c1bd0afcd48 100644
--- a/drivers/tty/goldfish.c
+++ b/drivers/tty/goldfish.c
@@ -433,6 +433,7 @@ static int goldfish_tty_remove(struct platform_device *pdev)
return 0;
}
+#ifdef CONFIG_GOLDFISH_TTY_EARLY_CONSOLE
static void gf_early_console_putchar(struct uart_port *port, int ch)
{
__raw_writel(ch, port->membase);
@@ -456,6 +457,7 @@ static int __init gf_earlycon_setup(struct earlycon_device *device,
}
OF_EARLYCON_DECLARE(early_gf_tty, "google,goldfish-tty", gf_earlycon_setup);
+#endif
static const struct of_device_id goldfish_tty_of_match[] = {
{ .compatible = "google,goldfish-tty", },
diff --git a/drivers/tty/isicom.c b/drivers/tty/isicom.c
index 015686ff4825..bdd3027ef01b 100644
--- a/drivers/tty/isicom.c
+++ b/drivers/tty/isicom.c
@@ -219,13 +219,9 @@ static struct isi_port isi_ports[PORT_COUNT];
static int WaitTillCardIsFree(unsigned long base)
{
unsigned int count = 0;
- unsigned int a = in_atomic(); /* do we run under spinlock? */
while (!(inw(base + 0xe) & 0x1) && count++ < 100)
- if (a)
- mdelay(1);
- else
- msleep(1);
+ mdelay(1);
return !(inw(base + 0xe) & 0x1);
}
diff --git a/drivers/tty/moxa.c b/drivers/tty/moxa.c
index 68cbc03aab4b..250a19f042d7 100644
--- a/drivers/tty/moxa.c
+++ b/drivers/tty/moxa.c
@@ -1487,8 +1487,6 @@ static void moxa_set_tty_param(struct tty_struct *tty, struct ktermios *old_term
if (ts->c_iflag & IXANY)
xany = 1;
- /* Clear the features we don't support */
- ts->c_cflag &= ~CMSPAR;
MoxaPortFlowCtrl(ch, rts, cts, txflow, rxflow, xany);
baud = MoxaPortSetTermio(ch, ts, tty_get_baud_rate(tty));
if (baud == -1)
@@ -1781,10 +1779,17 @@ static int MoxaPortSetTermio(struct moxa_port *port, struct ktermios *termio,
mode |= MX_STOP1;
if (termio->c_cflag & PARENB) {
- if (termio->c_cflag & PARODD)
- mode |= MX_PARODD;
- else
- mode |= MX_PAREVEN;
+ if (termio->c_cflag & PARODD) {
+ if (termio->c_cflag & CMSPAR)
+ mode |= MX_PARMARK;
+ else
+ mode |= MX_PARODD;
+ } else {
+ if (termio->c_cflag & CMSPAR)
+ mode |= MX_PARSPACE;
+ else
+ mode |= MX_PAREVEN;
+ }
} else
mode |= MX_PARNONE;
diff --git a/drivers/tty/moxa.h b/drivers/tty/moxa.h
index 8ce89fd36c7b..563d2dce80b3 100644
--- a/drivers/tty/moxa.h
+++ b/drivers/tty/moxa.h
@@ -301,5 +301,7 @@
#define MX_PARNONE 0x00
#define MX_PAREVEN 0x40
#define MX_PARODD 0xC0
+#define MX_PARMARK 0xA0
+#define MX_PARSPACE 0x20
#endif
diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c
index 5131bdc9e765..48e791d95f76 100644
--- a/drivers/tty/n_gsm.c
+++ b/drivers/tty/n_gsm.c
@@ -2955,7 +2955,6 @@ static int gsmtty_open(struct tty_struct *tty, struct file *filp)
static void gsmtty_close(struct tty_struct *tty, struct file *filp)
{
struct gsm_dlci *dlci = tty->driver_data;
- struct gsm_mux *gsm;
if (dlci == NULL)
return;
@@ -2964,7 +2963,6 @@ static void gsmtty_close(struct tty_struct *tty, struct file *filp)
mutex_lock(&dlci->mutex);
gsm_destroy_network(dlci);
mutex_unlock(&dlci->mutex);
- gsm = dlci->gsm;
if (tty_port_close_start(&dlci->port, tty, filp) == 0)
return;
gsm_dlci_begin_close(dlci);
diff --git a/drivers/tty/serdev/core.c b/drivers/tty/serdev/core.c
index 1bef39828ca7..28133dbd2808 100644
--- a/drivers/tty/serdev/core.c
+++ b/drivers/tty/serdev/core.c
@@ -132,6 +132,33 @@ void serdev_device_close(struct serdev_device *serdev)
}
EXPORT_SYMBOL_GPL(serdev_device_close);
+static void devm_serdev_device_release(struct device *dev, void *dr)
+{
+ serdev_device_close(*(struct serdev_device **)dr);
+}
+
+int devm_serdev_device_open(struct device *dev, struct serdev_device *serdev)
+{
+ struct serdev_device **dr;
+ int ret;
+
+ dr = devres_alloc(devm_serdev_device_release, sizeof(*dr), GFP_KERNEL);
+ if (!dr)
+ return -ENOMEM;
+
+ ret = serdev_device_open(serdev);
+ if (ret) {
+ devres_free(dr);
+ return ret;
+ }
+
+ *dr = serdev;
+ devres_add(dev, dr);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(devm_serdev_device_open);
+
void serdev_device_write_wakeup(struct serdev_device *serdev)
{
complete(&serdev->write_comp);
@@ -268,8 +295,8 @@ static int serdev_drv_probe(struct device *dev)
static int serdev_drv_remove(struct device *dev)
{
const struct serdev_device_driver *sdrv = to_serdev_device_driver(dev->driver);
-
- sdrv->remove(to_serdev_device(dev));
+ if (sdrv->remove)
+ sdrv->remove(to_serdev_device(dev));
return 0;
}
diff --git a/drivers/tty/serdev/serdev-ttyport.c b/drivers/tty/serdev/serdev-ttyport.c
index 247788a16f0b..a5abb05be67d 100644
--- a/drivers/tty/serdev/serdev-ttyport.c
+++ b/drivers/tty/serdev/serdev-ttyport.c
@@ -59,7 +59,8 @@ static void ttyport_write_wakeup(struct tty_port *port)
test_bit(SERPORT_ACTIVE, &serport->flags))
serdev_controller_write_wakeup(ctrl);
- wake_up_interruptible_poll(&tty->write_wait, POLLOUT);
+ /* Wake up any tty_wait_until_sent() */
+ wake_up_interruptible(&tty->write_wait);
tty_kref_put(tty);
}
@@ -122,6 +123,8 @@ static int ttyport_open(struct serdev_controller *ctrl)
if (ret)
goto err_close;
+ tty_unlock(serport->tty);
+
/* Bring the UART into a known 8 bits no parity hw fc state */
ktermios = tty->termios;
ktermios.c_iflag &= ~(IGNBRK | BRKINT | PARMRK | ISTRIP |
@@ -131,11 +134,12 @@ static int ttyport_open(struct serdev_controller *ctrl)
ktermios.c_cflag &= ~(CSIZE | PARENB);
ktermios.c_cflag |= CS8;
ktermios.c_cflag |= CRTSCTS;
+ /* Hangups are not supported so make sure to ignore carrier detect. */
+ ktermios.c_cflag |= CLOCAL;
tty_set_termios(tty, &ktermios);
set_bit(SERPORT_ACTIVE, &serport->flags);
- tty_unlock(serport->tty);
return 0;
err_close:
diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c
index 5bb0c42c88dd..bda75d317d24 100644
--- a/drivers/tty/serial/8250/8250_dw.c
+++ b/drivers/tty/serial/8250/8250_dw.c
@@ -515,7 +515,8 @@ static int dw8250_probe(struct platform_device *pdev)
/* If no clock rate is defined, fail. */
if (!p->uartclk) {
dev_err(dev, "clock rate not defined\n");
- return -EINVAL;
+ err = -EINVAL;
+ goto err_clk;
}
data->pclk = devm_clk_get(dev, "apb_pclk");
diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c
index bd40ba402410..57f6eba47f44 100644
--- a/drivers/tty/serial/8250/8250_omap.c
+++ b/drivers/tty/serial/8250/8250_omap.c
@@ -414,7 +414,7 @@ static void omap_8250_set_termios(struct uart_port *port,
/* Up to here it was mostly serial8250_do_set_termios() */
/*
- * We enable TRIG_GRANU for RX and TX and additionaly we set
+ * We enable TRIG_GRANU for RX and TX and additionally we set
* SCR_TX_EMPTY bit. The result is the following:
* - RX_TRIGGER amount of bytes in the FIFO will cause an interrupt.
* - less than RX_TRIGGER number of bytes will also cause an interrupt
diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig
index a5c0ef1e7695..16b1496e6105 100644
--- a/drivers/tty/serial/8250/Kconfig
+++ b/drivers/tty/serial/8250/Kconfig
@@ -5,6 +5,7 @@
config SERIAL_8250
tristate "8250/16550 and compatible serial support"
+ depends on !S390
select SERIAL_CORE
---help---
This selects whether you want to include the driver for the standard
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index b788fee54249..3682fd3e960c 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -761,24 +761,30 @@ config SERIAL_SH_SCI
select SERIAL_MCTRL_GPIO if GPIOLIB
config SERIAL_SH_SCI_NR_UARTS
- int "Maximum number of SCI(F) serial ports"
+ int "Maximum number of SCI(F) serial ports" if EXPERT
depends on SERIAL_SH_SCI
+ default "3" if H8300
+ default "10" if SUPERH
+ default "18" if ARCH_RENESAS
default "2"
config SERIAL_SH_SCI_CONSOLE
- bool "Support for console on SuperH SCI(F)"
+ bool "Support for console on SuperH SCI(F)" if EXPERT
depends on SERIAL_SH_SCI=y
select SERIAL_CORE_CONSOLE
+ default y
config SERIAL_SH_SCI_EARLYCON
- bool "Support for early console on SuperH SCI(F)"
+ bool "Support for early console on SuperH SCI(F)" if EXPERT
depends on SERIAL_SH_SCI=y
select SERIAL_CORE_CONSOLE
select SERIAL_EARLYCON
+ default ARCH_RENESAS || H8300
config SERIAL_SH_SCI_DMA
- bool "DMA support"
+ bool "DMA support" if EXPERT
depends on SERIAL_SH_SCI && DMA_ENGINE
+ default ARCH_RENESAS
config SERIAL_PNX8XXX
bool "Enable PNX8XXX SoCs' UART Support"
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index 04af8de8617e..4b40a5b449ee 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -314,10 +314,9 @@ static void pl011_write(unsigned int val, const struct uart_amba_port *uap,
static int pl011_fifo_to_tty(struct uart_amba_port *uap)
{
u16 status;
- unsigned int ch, flag, max_count = 256;
- int fifotaken = 0;
+ unsigned int ch, flag, fifotaken;
- while (max_count--) {
+ for (fifotaken = 0; fifotaken != 256; fifotaken++) {
status = pl011_read(uap, REG_FR);
if (status & UART01x_FR_RXFE)
break;
@@ -326,7 +325,6 @@ static int pl011_fifo_to_tty(struct uart_amba_port *uap)
ch = pl011_read(uap, REG_DR) | UART_DUMMY_DR_RX;
flag = TTY_NORMAL;
uap->port.icount.rx++;
- fifotaken++;
if (unlikely(ch & UART_DR_ERROR)) {
if (ch & UART011_DR_BE) {
@@ -1482,12 +1480,10 @@ static irqreturn_t pl011_int(int irq, void *dev_id)
struct uart_amba_port *uap = dev_id;
unsigned long flags;
unsigned int status, pass_counter = AMBA_ISR_PASS_LIMIT;
- u16 imsc;
int handled = 0;
spin_lock_irqsave(&uap->port.lock, flags);
- imsc = pl011_read(uap, REG_IMSC);
- status = pl011_read(uap, REG_RIS) & imsc;
+ status = pl011_read(uap, REG_RIS) & uap->im;
if (status) {
do {
check_apply_cts_event_workaround(uap);
@@ -1511,7 +1507,7 @@ static irqreturn_t pl011_int(int irq, void *dev_id)
if (pass_counter-- == 0)
break;
- status = pl011_read(uap, REG_RIS) & imsc;
+ status = pl011_read(uap, REG_RIS) & uap->im;
} while (status != 0);
handled = 1;
}
diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index efa25611ca0c..df46a9e88c34 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -2345,7 +2345,7 @@ static int atmel_init_port(struct atmel_uart_port *atmel_port,
atmel_init_property(atmel_port, pdev);
atmel_set_ops(port);
- of_get_rs485_mode(pdev->dev.of_node, &port->rs485);
+ uart_get_rs485_mode(&pdev->dev, &port->rs485);
port->iotype = UPIO_MEM;
port->flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP;
diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c
index 1c4d3f387138..8cf112f2efc3 100644
--- a/drivers/tty/serial/fsl_lpuart.c
+++ b/drivers/tty/serial/fsl_lpuart.c
@@ -2206,23 +2206,16 @@ static int lpuart_probe(struct platform_device *pdev)
if (ret)
goto failed_attach_port;
- of_get_rs485_mode(np, &sport->port.rs485);
+ uart_get_rs485_mode(&pdev->dev, &sport->port.rs485);
- if (sport->port.rs485.flags & SER_RS485_RX_DURING_TX) {
+ if (sport->port.rs485.flags & SER_RS485_RX_DURING_TX)
dev_err(&pdev->dev, "driver doesn't support RX during TX\n");
- return -ENOSYS;
- }
if (sport->port.rs485.delay_rts_before_send ||
- sport->port.rs485.delay_rts_after_send) {
+ sport->port.rs485.delay_rts_after_send)
dev_err(&pdev->dev, "driver doesn't support RTS delays\n");
- return -ENOSYS;
- }
- if (sport->port.rs485.flags & SER_RS485_ENABLED) {
- sport->port.rs485.flags |= SER_RS485_RTS_ON_SEND;
- writeb(UARTMODEM_TXRTSE, sport->port.membase + UARTMODEM);
- }
+ lpuart_config_rs485(&sport->port, &sport->port.rs485);
sport->dma_tx_chan = dma_request_slave_channel(sport->port.dev, "tx");
if (!sport->dma_tx_chan)
diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index e4b3d9123a03..c2b29fd66e8a 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -703,25 +703,6 @@ out:
return IRQ_HANDLED;
}
-static void imx_disable_rx_int(struct imx_port *sport)
-{
- unsigned long temp;
-
- /* disable the receiver ready and aging timer interrupts */
- temp = readl(sport->port.membase + UCR1);
- temp &= ~(UCR1_RRDYEN);
- writel(temp, sport->port.membase + UCR1);
-
- temp = readl(sport->port.membase + UCR2);
- temp &= ~(UCR2_ATEN);
- writel(temp, sport->port.membase + UCR2);
-
- /* disable the rx errors interrupts */
- temp = readl(sport->port.membase + UCR4);
- temp &= ~UCR4_OREN;
- writel(temp, sport->port.membase + UCR4);
-}
-
static void clear_rx_errors(struct imx_port *sport);
/*
@@ -1252,18 +1233,21 @@ static int imx_startup(struct uart_port *port)
if (sport->dma_is_inited && !sport->dma_is_enabled)
imx_enable_dma(sport);
- temp = readl(sport->port.membase + UCR1);
- temp |= UCR1_RRDYEN | UCR1_UARTEN;
+ temp = readl(sport->port.membase + UCR1) & ~UCR1_RRDYEN;
+ if (!sport->dma_is_enabled)
+ temp |= UCR1_RRDYEN;
+ temp |= UCR1_UARTEN;
if (sport->have_rtscts)
temp |= UCR1_RTSDEN;
writel(temp, sport->port.membase + UCR1);
- temp = readl(sport->port.membase + UCR4);
- temp |= UCR4_OREN;
+ temp = readl(sport->port.membase + UCR4) & ~UCR4_OREN;
+ if (!sport->dma_is_enabled)
+ temp |= UCR4_OREN;
writel(temp, sport->port.membase + UCR4);
- temp = readl(sport->port.membase + UCR2);
+ temp = readl(sport->port.membase + UCR2) & ~UCR2_ATEN;
temp |= (UCR2_RXEN | UCR2_TXEN);
if (!sport->have_rtscts)
temp |= UCR2_IRTS;
@@ -1297,10 +1281,8 @@ static int imx_startup(struct uart_port *port)
* In our iMX53 the average delay for the first reception dropped from
* approximately 35000 microseconds to 1000 microseconds.
*/
- if (sport->dma_is_enabled) {
- imx_disable_rx_int(sport);
+ if (sport->dma_is_enabled)
start_rx_dma(sport);
- }
spin_unlock_irqrestore(&sport->port.lock, flags);
@@ -2017,8 +1999,6 @@ static int serial_imx_probe_dt(struct imx_port *sport,
if (of_get_property(np, "rts-gpios", NULL))
sport->have_rtsgpio = 1;
- of_get_rs485_mode(np, &sport->port.rs485);
-
return 0;
}
#else
@@ -2080,7 +2060,6 @@ static int serial_imx_probe(struct platform_device *pdev)
sport->port.fifosize = 32;
sport->port.ops = &imx_pops;
sport->port.rs485_config = imx_rs485_config;
- sport->port.rs485.flags |= SER_RS485_RTS_ON_SEND;
sport->port.flags = UPF_BOOT_AUTOCONF;
timer_setup(&sport->timer, imx_timeout, 0);
@@ -2111,6 +2090,14 @@ static int serial_imx_probe(struct platform_device *pdev)
return ret;
}
+ uart_get_rs485_mode(&pdev->dev, &sport->port.rs485);
+
+ if (sport->port.rs485.flags & SER_RS485_ENABLED &&
+ (!sport->have_rtscts || !sport->have_rtsgpio))
+ dev_err(&pdev->dev, "no RTS control, disabling rs485\n");
+
+ imx_rs485_config(&sport->port, &sport->port.rs485);
+
/* Disable interrupts before requesting them */
reg = readl_relaxed(sport->port.membase + UCR1);
reg &= ~(UCR1_ADEN | UCR1_TRDYEN | UCR1_IDEN | UCR1_RRDYEN |
diff --git a/drivers/tty/serial/max310x.c b/drivers/tty/serial/max310x.c
index ecb6513a6505..97576ff791db 100644
--- a/drivers/tty/serial/max310x.c
+++ b/drivers/tty/serial/max310x.c
@@ -233,6 +233,7 @@
/* Misc definitions */
#define MAX310X_FIFO_SIZE (128)
#define MAX310x_REV_MASK (0xf8)
+#define MAX310X_WRITE_BIT 0x80
/* MAX3107 specific */
#define MAX3107_REV_ID (0xa0)
@@ -593,57 +594,118 @@ static int max310x_set_ref_clk(struct max310x_port *s, unsigned long freq,
return (int)bestfreq;
}
-static void max310x_handle_rx(struct uart_port *port, unsigned int rxlen)
+static void max310x_batch_write(struct uart_port *port, u8 *txbuf, unsigned int len)
{
- unsigned int sts, ch, flag;
+ u8 header[] = { (port->iobase + MAX310X_THR_REG) | MAX310X_WRITE_BIT };
+ struct spi_transfer xfer[] = {
+ {
+ .tx_buf = &header,
+ .len = sizeof(header),
+ }, {
+ .tx_buf = txbuf,
+ .len = len,
+ }
+ };
+ spi_sync_transfer(to_spi_device(port->dev), xfer, ARRAY_SIZE(xfer));
+}
- if (unlikely(rxlen >= port->fifosize)) {
- dev_warn_ratelimited(port->dev, "Possible RX FIFO overrun\n");
- port->icount.buf_overrun++;
- /* Ensure sanity of RX level */
- rxlen = port->fifosize;
- }
+static void max310x_batch_read(struct uart_port *port, u8 *rxbuf, unsigned int len)
+{
+ u8 header[] = { port->iobase + MAX310X_RHR_REG };
+ struct spi_transfer xfer[] = {
+ {
+ .tx_buf = &header,
+ .len = sizeof(header),
+ }, {
+ .rx_buf = rxbuf,
+ .len = len,
+ }
+ };
+ spi_sync_transfer(to_spi_device(port->dev), xfer, ARRAY_SIZE(xfer));
+}
- while (rxlen--) {
- ch = max310x_port_read(port, MAX310X_RHR_REG);
- sts = max310x_port_read(port, MAX310X_LSR_IRQSTS_REG);
+static void max310x_handle_rx(struct uart_port *port, unsigned int rxlen)
+{
+ unsigned int sts, ch, flag, i;
+ u8 buf[MAX310X_FIFO_SIZE];
+
+ if (port->read_status_mask == MAX310X_LSR_RXOVR_BIT) {
+ /* We are just reading, happily ignoring any error conditions.
+ * Break condition, parity checking, framing errors -- they
+ * are all ignored. That means that we can do a batch-read.
+ *
+ * There is a small opportunity for race if the RX FIFO
+ * overruns while we're reading the buffer; the datasheets says
+ * that the LSR register applies to the "current" character.
+ * That's also the reason why we cannot do batched reads when
+ * asked to check the individual statuses.
+ * */
- sts &= MAX310X_LSR_RXPAR_BIT | MAX310X_LSR_FRERR_BIT |
- MAX310X_LSR_RXOVR_BIT | MAX310X_LSR_RXBRK_BIT;
+ sts = max310x_port_read(port, MAX310X_LSR_IRQSTS_REG);
+ max310x_batch_read(port, buf, rxlen);
- port->icount.rx++;
+ port->icount.rx += rxlen;
flag = TTY_NORMAL;
+ sts &= port->read_status_mask;
- if (unlikely(sts)) {
- if (sts & MAX310X_LSR_RXBRK_BIT) {
- port->icount.brk++;
- if (uart_handle_break(port))
- continue;
- } else if (sts & MAX310X_LSR_RXPAR_BIT)
- port->icount.parity++;
- else if (sts & MAX310X_LSR_FRERR_BIT)
- port->icount.frame++;
- else if (sts & MAX310X_LSR_RXOVR_BIT)
- port->icount.overrun++;
-
- sts &= port->read_status_mask;
- if (sts & MAX310X_LSR_RXBRK_BIT)
- flag = TTY_BREAK;
- else if (sts & MAX310X_LSR_RXPAR_BIT)
- flag = TTY_PARITY;
- else if (sts & MAX310X_LSR_FRERR_BIT)
- flag = TTY_FRAME;
- else if (sts & MAX310X_LSR_RXOVR_BIT)
- flag = TTY_OVERRUN;
+ if (sts & MAX310X_LSR_RXOVR_BIT) {
+ dev_warn_ratelimited(port->dev, "Hardware RX FIFO overrun\n");
+ port->icount.overrun++;
}
- if (uart_handle_sysrq_char(port, ch))
- continue;
+ for (i = 0; i < rxlen; ++i) {
+ uart_insert_char(port, sts, MAX310X_LSR_RXOVR_BIT, buf[i], flag);
+ }
- if (sts & port->ignore_status_mask)
- continue;
+ } else {
+ if (unlikely(rxlen >= port->fifosize)) {
+ dev_warn_ratelimited(port->dev, "Possible RX FIFO overrun\n");
+ port->icount.buf_overrun++;
+ /* Ensure sanity of RX level */
+ rxlen = port->fifosize;
+ }
- uart_insert_char(port, sts, MAX310X_LSR_RXOVR_BIT, ch, flag);
+ while (rxlen--) {
+ ch = max310x_port_read(port, MAX310X_RHR_REG);
+ sts = max310x_port_read(port, MAX310X_LSR_IRQSTS_REG);
+
+ sts &= MAX310X_LSR_RXPAR_BIT | MAX310X_LSR_FRERR_BIT |
+ MAX310X_LSR_RXOVR_BIT | MAX310X_LSR_RXBRK_BIT;
+
+ port->icount.rx++;
+ flag = TTY_NORMAL;
+
+ if (unlikely(sts)) {
+ if (sts & MAX310X_LSR_RXBRK_BIT) {
+ port->icount.brk++;
+ if (uart_handle_break(port))
+ continue;
+ } else if (sts & MAX310X_LSR_RXPAR_BIT)
+ port->icount.parity++;
+ else if (sts & MAX310X_LSR_FRERR_BIT)
+ port->icount.frame++;
+ else if (sts & MAX310X_LSR_RXOVR_BIT)
+ port->icount.overrun++;
+
+ sts &= port->read_status_mask;
+ if (sts & MAX310X_LSR_RXBRK_BIT)
+ flag = TTY_BREAK;
+ else if (sts & MAX310X_LSR_RXPAR_BIT)
+ flag = TTY_PARITY;
+ else if (sts & MAX310X_LSR_FRERR_BIT)
+ flag = TTY_FRAME;
+ else if (sts & MAX310X_LSR_RXOVR_BIT)
+ flag = TTY_OVERRUN;
+ }
+
+ if (uart_handle_sysrq_char(port, ch))
+ continue;
+
+ if (sts & port->ignore_status_mask)
+ continue;
+
+ uart_insert_char(port, sts, MAX310X_LSR_RXOVR_BIT, ch, flag);
+ }
}
tty_flip_buffer_push(&port->state->port);
@@ -652,7 +714,7 @@ static void max310x_handle_rx(struct uart_port *port, unsigned int rxlen)
static void max310x_handle_tx(struct uart_port *port)
{
struct circ_buf *xmit = &port->state->xmit;
- unsigned int txlen, to_send;
+ unsigned int txlen, to_send, until_end;
if (unlikely(port->x_char)) {
max310x_port_write(port, MAX310X_THR_REG, port->x_char);
@@ -666,28 +728,43 @@ static void max310x_handle_tx(struct uart_port *port)
/* Get length of data pending in circular buffer */
to_send = uart_circ_chars_pending(xmit);
+ until_end = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE);
if (likely(to_send)) {
/* Limit to size of TX FIFO */
txlen = max310x_port_read(port, MAX310X_TXFIFOLVL_REG);
txlen = port->fifosize - txlen;
to_send = (to_send > txlen) ? txlen : to_send;
+ if (until_end < to_send) {
+ /* It's a circ buffer -- wrap around.
+ * We could do that in one SPI transaction, but meh. */
+ max310x_batch_write(port, xmit->buf + xmit->tail, until_end);
+ max310x_batch_write(port, xmit->buf, to_send - until_end);
+ } else {
+ max310x_batch_write(port, xmit->buf + xmit->tail, to_send);
+ }
+
/* Add data to send */
port->icount.tx += to_send;
- while (to_send--) {
- max310x_port_write(port, MAX310X_THR_REG,
- xmit->buf[xmit->tail]);
- xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
- }
+ xmit->tail = (xmit->tail + to_send) & (UART_XMIT_SIZE - 1);
}
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
uart_write_wakeup(port);
}
-static void max310x_port_irq(struct max310x_port *s, int portno)
+static void max310x_start_tx(struct uart_port *port)
+{
+ struct max310x_one *one = container_of(port, struct max310x_one, port);
+
+ if (!work_pending(&one->tx_work))
+ schedule_work(&one->tx_work);
+}
+
+static irqreturn_t max310x_port_irq(struct max310x_port *s, int portno)
{
struct uart_port *port = &s->p[portno].port;
+ irqreturn_t res = IRQ_NONE;
do {
unsigned int ists, lsr, rxlen;
@@ -698,6 +775,8 @@ static void max310x_port_irq(struct max310x_port *s, int portno)
if (!ists && !rxlen)
break;
+ res = IRQ_HANDLED;
+
if (ists & MAX310X_IRQ_CTS_BIT) {
lsr = max310x_port_read(port, MAX310X_LSR_IRQSTS_REG);
uart_handle_cts_change(port,
@@ -705,17 +784,16 @@ static void max310x_port_irq(struct max310x_port *s, int portno)
}
if (rxlen)
max310x_handle_rx(port, rxlen);
- if (ists & MAX310X_IRQ_TXEMPTY_BIT) {
- mutex_lock(&s->mutex);
- max310x_handle_tx(port);
- mutex_unlock(&s->mutex);
- }
+ if (ists & MAX310X_IRQ_TXEMPTY_BIT)
+ max310x_start_tx(port);
} while (1);
+ return res;
}
static irqreturn_t max310x_ist(int irq, void *dev_id)
{
struct max310x_port *s = (struct max310x_port *)dev_id;
+ bool handled = false;
if (s->devtype->nr > 1) {
do {
@@ -726,12 +804,15 @@ static irqreturn_t max310x_ist(int irq, void *dev_id)
val = ((1 << s->devtype->nr) - 1) & ~val;
if (!val)
break;
- max310x_port_irq(s, fls(val) - 1);
+ if (max310x_port_irq(s, fls(val) - 1) == IRQ_HANDLED)
+ handled = true;
} while (1);
- } else
- max310x_port_irq(s, 0);
+ } else {
+ if (max310x_port_irq(s, 0) == IRQ_HANDLED)
+ handled = true;
+ }
- return IRQ_HANDLED;
+ return IRQ_RETVAL(handled);
}
static void max310x_wq_proc(struct work_struct *ws)
@@ -744,14 +825,6 @@ static void max310x_wq_proc(struct work_struct *ws)
mutex_unlock(&s->mutex);
}
-static void max310x_start_tx(struct uart_port *port)
-{
- struct max310x_one *one = container_of(port, struct max310x_one, port);
-
- if (!work_pending(&one->tx_work))
- schedule_work(&one->tx_work);
-}
-
static unsigned int max310x_tx_empty(struct uart_port *port)
{
unsigned int lvl, sts;
@@ -1089,7 +1162,7 @@ static int max310x_gpio_direction_output(struct gpio_chip *chip,
#endif
static int max310x_probe(struct device *dev, struct max310x_devtype *devtype,
- struct regmap *regmap, int irq, unsigned long flags)
+ struct regmap *regmap, int irq)
{
int i, ret, fmin, fmax, freq, uartclk;
struct clk *clk_osc, *clk_xtal;
@@ -1169,23 +1242,6 @@ static int max310x_probe(struct device *dev, struct max310x_devtype *devtype,
uartclk = max310x_set_ref_clk(s, freq, xtal);
dev_dbg(dev, "Reference clock set to %i Hz\n", uartclk);
-#ifdef CONFIG_GPIOLIB
- /* Setup GPIO cotroller */
- s->gpio.owner = THIS_MODULE;
- s->gpio.parent = dev;
- s->gpio.label = dev_name(dev);
- s->gpio.direction_input = max310x_gpio_direction_input;
- s->gpio.get = max310x_gpio_get;
- s->gpio.direction_output= max310x_gpio_direction_output;
- s->gpio.set = max310x_gpio_set;
- s->gpio.base = -1;
- s->gpio.ngpio = devtype->nr * 4;
- s->gpio.can_sleep = 1;
- ret = devm_gpiochip_add_data(dev, &s->gpio, s);
- if (ret)
- goto out_clk;
-#endif
-
mutex_init(&s->mutex);
for (i = 0; i < devtype->nr; i++) {
@@ -1237,9 +1293,26 @@ static int max310x_probe(struct device *dev, struct max310x_devtype *devtype,
devtype->power(&s->p[i].port, 0);
}
+#ifdef CONFIG_GPIOLIB
+ /* Setup GPIO cotroller */
+ s->gpio.owner = THIS_MODULE;
+ s->gpio.parent = dev;
+ s->gpio.label = dev_name(dev);
+ s->gpio.direction_input = max310x_gpio_direction_input;
+ s->gpio.get = max310x_gpio_get;
+ s->gpio.direction_output= max310x_gpio_direction_output;
+ s->gpio.set = max310x_gpio_set;
+ s->gpio.base = -1;
+ s->gpio.ngpio = devtype->nr * 4;
+ s->gpio.can_sleep = 1;
+ ret = devm_gpiochip_add_data(dev, &s->gpio, s);
+ if (ret)
+ goto out_uart;
+#endif
+
/* Setup interrupt */
ret = devm_request_threaded_irq(dev, irq, NULL, max310x_ist,
- IRQF_ONESHOT | flags, dev_name(dev), s);
+ IRQF_ONESHOT | IRQF_SHARED, dev_name(dev), s);
if (!ret)
return 0;
@@ -1293,7 +1366,7 @@ MODULE_DEVICE_TABLE(of, max310x_dt_ids);
static struct regmap_config regcfg = {
.reg_bits = 8,
.val_bits = 8,
- .write_flag_mask = 0x80,
+ .write_flag_mask = MAX310X_WRITE_BIT,
.cache_type = REGCACHE_RBTREE,
.writeable_reg = max310x_reg_writeable,
.volatile_reg = max310x_reg_volatile,
@@ -1304,7 +1377,6 @@ static struct regmap_config regcfg = {
static int max310x_spi_probe(struct spi_device *spi)
{
struct max310x_devtype *devtype;
- unsigned long flags = 0;
struct regmap *regmap;
int ret;
@@ -1327,11 +1399,10 @@ static int max310x_spi_probe(struct spi_device *spi)
devtype = (struct max310x_devtype *)id_entry->driver_data;
}
- flags = IRQF_TRIGGER_FALLING;
regcfg.max_register = devtype->nr * 0x20 - 1;
regmap = devm_regmap_init_spi(spi, &regcfg);
- return max310x_probe(&spi->dev, devtype, regmap, spi->irq, flags);
+ return max310x_probe(&spi->dev, devtype, regmap, spi->irq);
}
static int max310x_spi_remove(struct spi_device *spi)
diff --git a/drivers/tty/serial/meson_uart.c b/drivers/tty/serial/meson_uart.c
index daafe60175da..8a842591b37c 100644
--- a/drivers/tty/serial/meson_uart.c
+++ b/drivers/tty/serial/meson_uart.c
@@ -34,9 +34,15 @@
/* AML_UART_CONTROL bits */
#define AML_UART_TX_EN BIT(12)
#define AML_UART_RX_EN BIT(13)
+#define AML_UART_TWO_WIRE_EN BIT(15)
+#define AML_UART_STOP_BIT_LEN_MASK (0x03 << 16)
+#define AML_UART_STOP_BIT_1SB (0x00 << 16)
+#define AML_UART_STOP_BIT_2SB (0x01 << 16)
+#define AML_UART_PARITY_TYPE BIT(18)
+#define AML_UART_PARITY_EN BIT(19)
#define AML_UART_TX_RST BIT(22)
#define AML_UART_RX_RST BIT(23)
-#define AML_UART_CLR_ERR BIT(24)
+#define AML_UART_CLEAR_ERR BIT(24)
#define AML_UART_RX_INT_EN BIT(27)
#define AML_UART_TX_INT_EN BIT(28)
#define AML_UART_DATA_LEN_MASK (0x03 << 20)
@@ -57,15 +63,6 @@
AML_UART_FRAME_ERR | \
AML_UART_TX_FIFO_WERR)
-/* AML_UART_CONTROL bits */
-#define AML_UART_TWO_WIRE_EN BIT(15)
-#define AML_UART_PARITY_TYPE BIT(18)
-#define AML_UART_PARITY_EN BIT(19)
-#define AML_UART_CLEAR_ERR BIT(24)
-#define AML_UART_STOP_BIN_LEN_MASK (0x03 << 16)
-#define AML_UART_STOP_BIN_1SB (0x00 << 16)
-#define AML_UART_STOP_BIN_2SB (0x01 << 16)
-
/* AML_UART_MISC bits */
#define AML_UART_XMIT_IRQ(c) (((c) & 0xff) << 8)
#define AML_UART_RECV_IRQ(c) ((c) & 0xff)
@@ -263,10 +260,10 @@ static void meson_uart_reset(struct uart_port *port)
u32 val;
val = readl(port->membase + AML_UART_CONTROL);
- val |= (AML_UART_RX_RST | AML_UART_TX_RST | AML_UART_CLR_ERR);
+ val |= (AML_UART_RX_RST | AML_UART_TX_RST | AML_UART_CLEAR_ERR);
writel(val, port->membase + AML_UART_CONTROL);
- val &= ~(AML_UART_RX_RST | AML_UART_TX_RST | AML_UART_CLR_ERR);
+ val &= ~(AML_UART_RX_RST | AML_UART_TX_RST | AML_UART_CLEAR_ERR);
writel(val, port->membase + AML_UART_CONTROL);
}
@@ -276,9 +273,9 @@ static int meson_uart_startup(struct uart_port *port)
int ret = 0;
val = readl(port->membase + AML_UART_CONTROL);
- val |= AML_UART_CLR_ERR;
+ val |= AML_UART_CLEAR_ERR;
writel(val, port->membase + AML_UART_CONTROL);
- val &= ~AML_UART_CLR_ERR;
+ val &= ~AML_UART_CLEAR_ERR;
writel(val, port->membase + AML_UART_CONTROL);
val |= (AML_UART_RX_EN | AML_UART_TX_EN);
@@ -354,11 +351,11 @@ static void meson_uart_set_termios(struct uart_port *port,
else
val &= ~AML_UART_PARITY_TYPE;
- val &= ~AML_UART_STOP_BIN_LEN_MASK;
+ val &= ~AML_UART_STOP_BIT_LEN_MASK;
if (cflags & CSTOPB)
- val |= AML_UART_STOP_BIN_2SB;
+ val |= AML_UART_STOP_BIT_2SB;
else
- val |= AML_UART_STOP_BIN_1SB;
+ val |= AML_UART_STOP_BIT_1SB;
if (cflags & CRTSCTS)
val &= ~AML_UART_TWO_WIRE_EN;
diff --git a/drivers/tty/serial/mxs-auart.c b/drivers/tty/serial/mxs-auart.c
index efb4fd3784ed..5b470406bf9d 100644
--- a/drivers/tty/serial/mxs-auart.c
+++ b/drivers/tty/serial/mxs-auart.c
@@ -1721,7 +1721,7 @@ static int mxs_auart_probe(struct platform_device *pdev)
ret = uart_add_one_port(&auart_driver, &s->port);
if (ret)
- goto out_free_gpio_irq;
+ goto out_disable_clks_free_qpio_irq;
/* ASM9260 don't have version reg */
if (is_asm9260_auart(s)) {
@@ -1735,7 +1735,11 @@ static int mxs_auart_probe(struct platform_device *pdev)
return 0;
-out_free_gpio_irq:
+out_disable_clks_free_qpio_irq:
+ if (s->clk)
+ clk_disable_unprepare(s->clk_ahb);
+ if (s->clk_ahb)
+ clk_disable_unprepare(s->clk_ahb);
mxs_auart_free_gpio_irq(s);
auart_port[pdev->id] = NULL;
return ret;
diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c
index 53d59e9b944a..56e683373d6d 100644
--- a/drivers/tty/serial/omap-serial.c
+++ b/drivers/tty/serial/omap-serial.c
@@ -1611,10 +1611,15 @@ static int serial_omap_probe_rs485(struct uart_omap_port *up,
if (!np)
return 0;
- if (of_property_read_bool(np, "rs485-rts-active-high"))
+ uart_get_rs485_mode(up->dev, rs485conf);
+
+ if (of_property_read_bool(np, "rs485-rts-active-high")) {
rs485conf->flags |= SER_RS485_RTS_ON_SEND;
- else
+ rs485conf->flags &= ~SER_RS485_RTS_AFTER_SEND;
+ } else {
+ rs485conf->flags &= ~SER_RS485_RTS_ON_SEND;
rs485conf->flags |= SER_RS485_RTS_AFTER_SEND;
+ }
/* check for tx enable gpio */
up->rts_gpio = of_get_named_gpio_flags(np, "rts-gpio", 0, &flags);
@@ -1632,8 +1637,6 @@ static int serial_omap_probe_rs485(struct uart_omap_port *up,
up->rts_gpio = -EINVAL;
}
- of_get_rs485_mode(np, rs485conf);
-
return 0;
}
diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index 854995e1cae7..f57969de2f1c 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -3013,19 +3013,20 @@ EXPORT_SYMBOL(uart_add_one_port);
EXPORT_SYMBOL(uart_remove_one_port);
/**
- * of_get_rs485_mode() - Implement parsing rs485 properties
- * @np: uart node
+ * uart_get_rs485_mode() - retrieve rs485 properties for given uart
+ * @dev: uart device
* @rs485conf: output parameter
*
* This function implements the device tree binding described in
* Documentation/devicetree/bindings/serial/rs485.txt.
*/
-void of_get_rs485_mode(struct device_node *np, struct serial_rs485 *rs485conf)
+void uart_get_rs485_mode(struct device *dev, struct serial_rs485 *rs485conf)
{
u32 rs485_delay[2];
int ret;
- ret = of_property_read_u32_array(np, "rs485-rts-delay", rs485_delay, 2);
+ ret = device_property_read_u32_array(dev, "rs485-rts-delay",
+ rs485_delay, 2);
if (!ret) {
rs485conf->delay_rts_before_send = rs485_delay[0];
rs485conf->delay_rts_after_send = rs485_delay[1];
@@ -3035,18 +3036,25 @@ void of_get_rs485_mode(struct device_node *np, struct serial_rs485 *rs485conf)
}
/*
- * clear full-duplex and enabled flags to get to a defined state with
- * the two following properties.
+ * Clear full-duplex and enabled flags, set RTS polarity to active high
+ * to get to a defined state with the following properties:
*/
- rs485conf->flags &= ~(SER_RS485_RX_DURING_TX | SER_RS485_ENABLED);
+ rs485conf->flags &= ~(SER_RS485_RX_DURING_TX | SER_RS485_ENABLED |
+ SER_RS485_RTS_AFTER_SEND);
+ rs485conf->flags |= SER_RS485_RTS_ON_SEND;
- if (of_property_read_bool(np, "rs485-rx-during-tx"))
+ if (device_property_read_bool(dev, "rs485-rx-during-tx"))
rs485conf->flags |= SER_RS485_RX_DURING_TX;
- if (of_property_read_bool(np, "linux,rs485-enabled-at-boot-time"))
+ if (device_property_read_bool(dev, "linux,rs485-enabled-at-boot-time"))
rs485conf->flags |= SER_RS485_ENABLED;
+
+ if (device_property_read_bool(dev, "rs485-rts-active-low")) {
+ rs485conf->flags &= ~SER_RS485_RTS_ON_SEND;
+ rs485conf->flags |= SER_RS485_RTS_AFTER_SEND;
+ }
}
-EXPORT_SYMBOL_GPL(of_get_rs485_mode);
+EXPORT_SYMBOL_GPL(uart_get_rs485_mode);
MODULE_DESCRIPTION("Serial driver core");
MODULE_LICENSE("GPL");
diff --git a/drivers/tty/serial/stm32-usart.h b/drivers/tty/serial/stm32-usart.h
index 8a5ff54d0f42..2294d0f05872 100644
--- a/drivers/tty/serial/stm32-usart.h
+++ b/drivers/tty/serial/stm32-usart.h
@@ -236,7 +236,7 @@ struct stm32_usart_info stm32h7_info = {
#define USART_ICR_CMCF BIT(17) /* F7 */
#define USART_ICR_WUCF BIT(20) /* H7 */
-#define STM32_SERIAL_NAME "ttyS"
+#define STM32_SERIAL_NAME "ttySTM"
#define STM32_MAX_PORTS 8
#define RX_BUF_L 200 /* dma rx buffer length */
diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c
index dc60aeea87d8..a6ca634411e1 100644
--- a/drivers/tty/tty_io.c
+++ b/drivers/tty/tty_io.c
@@ -1476,6 +1476,8 @@ static void release_tty(struct tty_struct *tty, int idx)
if (tty->link)
tty->link->port->itty = NULL;
tty_buffer_cancel_work(tty->port);
+ if (tty->link)
+ tty_buffer_cancel_work(tty->link->port);
tty_kref_put(tty->link);
tty_kref_put(tty);
diff --git a/drivers/tty/vt/selection.c b/drivers/tty/vt/selection.c
index af4da9507180..7851383fbd6c 100644
--- a/drivers/tty/vt/selection.c
+++ b/drivers/tty/vt/selection.c
@@ -186,11 +186,7 @@ int set_selection(const struct tiocl_selection __user *sel, struct tty_struct *t
}
if (ps > pe) /* make sel_start <= sel_end */
- {
- int tmp = ps;
- ps = pe;
- pe = tmp;
- }
+ swap(ps, pe);
if (sel_cons != vc_cons[fg_console].d) {
clear_selection();
generated by cgit v1.2.3 (git 2.39.0) at 2025-03-07 02:44:20 +0300