diff options
Diffstat (limited to 'drivers/tty/serial')
46 files changed, 1315 insertions, 224 deletions
diff --git a/drivers/tty/serial/21285.c b/drivers/tty/serial/21285.c index 9b208bd686e6..804632b4a929 100644 --- a/drivers/tty/serial/21285.c +++ b/drivers/tty/serial/21285.c @@ -334,7 +334,7 @@ static int serial21285_verify_port(struct uart_port *port, struct serial_struct return ret; } -static struct uart_ops serial21285_ops = { +static const struct uart_ops serial21285_ops = { .tx_empty = serial21285_tx_empty, .get_mctrl = serial21285_get_mctrl, .set_mctrl = serial21285_set_mctrl, diff --git a/drivers/tty/serial/8250/8250_aspeed_vuart.c b/drivers/tty/serial/8250/8250_aspeed_vuart.c index 822be4906763..33a801353114 100644 --- a/drivers/tty/serial/8250/8250_aspeed_vuart.c +++ b/drivers/tty/serial/8250/8250_aspeed_vuart.c @@ -223,12 +223,13 @@ static int aspeed_vuart_probe(struct platform_device *pdev) if (IS_ERR(vuart->clk)) { dev_warn(&pdev->dev, "clk or clock-frequency not defined\n"); - return PTR_ERR(vuart->clk); + rc = PTR_ERR(vuart->clk); + goto err_sysfs_remove; } rc = clk_prepare_enable(vuart->clk); if (rc < 0) - return rc; + goto err_sysfs_remove; clk = clk_get_rate(vuart->clk); } @@ -286,6 +287,8 @@ static int aspeed_vuart_probe(struct platform_device *pdev) err_clk_disable: clk_disable_unprepare(vuart->clk); irq_dispose_mapping(port.port.irq); +err_sysfs_remove: + sysfs_remove_group(&vuart->dev->kobj, &aspeed_vuart_attr_group); return rc; } diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c index 1aab3010fbfa..d29b512a7d9f 100644 --- a/drivers/tty/serial/8250/8250_core.c +++ b/drivers/tty/serial/8250/8250_core.c @@ -497,6 +497,11 @@ static void univ8250_rsa_support(struct uart_ops *ops) #define univ8250_rsa_support(x) do { } while (0) #endif /* CONFIG_SERIAL_8250_RSA */ +static inline void serial8250_apply_quirks(struct uart_8250_port *up) +{ + up->port.quirks |= skip_txen_test ? UPQ_NO_TXEN_TEST : 0; +} + static void __init serial8250_isa_init_ports(void) { struct uart_8250_port *up; @@ -577,9 +582,7 @@ serial8250_register_ports(struct uart_driver *drv, struct device *dev) up->port.dev = dev; - if (skip_txen_test) - up->port.flags |= UPF_NO_TXEN_TEST; - + serial8250_apply_quirks(up); uart_add_one_port(drv, &up->port); } } @@ -1006,9 +1009,6 @@ int serial8250_register_8250_port(struct uart_8250_port *up) if (up->port.dev) uart->port.dev = up->port.dev; - if (skip_txen_test) - uart->port.flags |= UPF_NO_TXEN_TEST; - if (up->port.flags & UPF_FIXED_TYPE) uart->port.type = up->port.type; @@ -1048,6 +1048,7 @@ int serial8250_register_8250_port(struct uart_8250_port *up) serial8250_isa_config(0, &uart->port, &uart->capabilities); + serial8250_apply_quirks(uart); ret = uart_add_one_port(&serial8250_reg, &uart->port); if (ret == 0) @@ -1092,11 +1093,10 @@ void serial8250_unregister_port(int line) uart_remove_one_port(&serial8250_reg, &uart->port); if (serial8250_isa_devs) { uart->port.flags &= ~UPF_BOOT_AUTOCONF; - if (skip_txen_test) - uart->port.flags |= UPF_NO_TXEN_TEST; uart->port.type = PORT_UNKNOWN; uart->port.dev = &serial8250_isa_devs->dev; uart->capabilities = 0; + serial8250_apply_quirks(uart); uart_add_one_port(&serial8250_reg, &uart->port); } else { uart->port.dev = NULL; diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c index 787b1160d3a5..7e638997bfc2 100644 --- a/drivers/tty/serial/8250/8250_dw.c +++ b/drivers/tty/serial/8250/8250_dw.c @@ -529,7 +529,7 @@ static int dw8250_probe(struct platform_device *pdev) } } - data->rst = devm_reset_control_get_optional(dev, NULL); + data->rst = devm_reset_control_get_optional_exclusive(dev, NULL); if (IS_ERR(data->rst)) { err = PTR_ERR(data->rst); goto err_pclk; diff --git a/drivers/tty/serial/8250/8250_early.c b/drivers/tty/serial/8250/8250_early.c index 82fc48eca1df..af72ec32e404 100644 --- a/drivers/tty/serial/8250/8250_early.c +++ b/drivers/tty/serial/8250/8250_early.c @@ -37,7 +37,7 @@ #include <asm/io.h> #include <asm/serial.h> -static unsigned int __init serial8250_early_in(struct uart_port *port, int offset) +static unsigned int serial8250_early_in(struct uart_port *port, int offset) { int reg_offset = offset; offset <<= port->regshift; @@ -60,7 +60,7 @@ static unsigned int __init serial8250_early_in(struct uart_port *port, int offse } } -static void __init serial8250_early_out(struct uart_port *port, int offset, int value) +static void serial8250_early_out(struct uart_port *port, int offset, int value) { int reg_offset = offset; offset <<= port->regshift; @@ -89,7 +89,7 @@ static void __init serial8250_early_out(struct uart_port *port, int offset, int #define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE) -static void __init serial_putc(struct uart_port *port, int c) +static void serial_putc(struct uart_port *port, int c) { unsigned int status; @@ -103,7 +103,7 @@ static void __init serial_putc(struct uart_port *port, int c) } } -static void __init early_serial8250_write(struct console *console, +static void early_serial8250_write(struct console *console, const char *s, unsigned int count) { struct earlycon_device *device = console->data; diff --git a/drivers/tty/serial/8250/8250_exar.c b/drivers/tty/serial/8250/8250_exar.c index c6360fbdf808..c55624703fdf 100644 --- a/drivers/tty/serial/8250/8250_exar.c +++ b/drivers/tty/serial/8250/8250_exar.c @@ -601,7 +601,7 @@ static const struct exar8250_board pbn_exar_XR17V8358 = { (kernel_ulong_t)&bd \ } -static struct pci_device_id exar_pci_tbl[] = { +static const struct pci_device_id exar_pci_tbl[] = { CONNECT_DEVICE(XR17C152, UART_2_232, pbn_connect), CONNECT_DEVICE(XR17C154, UART_4_232, pbn_connect), CONNECT_DEVICE(XR17C158, UART_8_232, pbn_connect), diff --git a/drivers/tty/serial/8250/8250_gsc.c b/drivers/tty/serial/8250/8250_gsc.c index 63306de4390d..df2931e1e086 100644 --- a/drivers/tty/serial/8250/8250_gsc.c +++ b/drivers/tty/serial/8250/8250_gsc.c @@ -80,7 +80,7 @@ static int __init serial_init_chip(struct parisc_device *dev) return 0; } -static struct parisc_device_id serial_tbl[] = { +static const struct parisc_device_id serial_tbl[] __initconst = { { HPHW_FIO, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x00075 }, { HPHW_FIO, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x0008c }, { HPHW_FIO, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x0008d }, @@ -94,7 +94,7 @@ static struct parisc_device_id serial_tbl[] = { * which only knows about Lasi and then a second which will find all the * other serial ports. HPUX ignores this problem. */ -static struct parisc_device_id lasi_tbl[] = { +static const struct parisc_device_id lasi_tbl[] __initconst = { { HPHW_FIO, HVERSION_REV_ANY_ID, 0x03B, 0x0008C }, /* C1xx/C1xxL */ { HPHW_FIO, HVERSION_REV_ANY_ID, 0x03C, 0x0008C }, /* B132L */ { HPHW_FIO, HVERSION_REV_ANY_ID, 0x03D, 0x0008C }, /* B160L */ @@ -110,13 +110,13 @@ static struct parisc_device_id lasi_tbl[] = { MODULE_DEVICE_TABLE(parisc, serial_tbl); -static struct parisc_driver lasi_driver = { +static struct parisc_driver lasi_driver __refdata = { .name = "serial_1", .id_table = lasi_tbl, .probe = serial_init_chip, }; -static struct parisc_driver serial_driver = { +static struct parisc_driver serial_driver __refdata = { .name = "serial", .id_table = serial_tbl, .probe = serial_init_chip, diff --git a/drivers/tty/serial/8250/8250_ingenic.c b/drivers/tty/serial/8250/8250_ingenic.c index 4d9dc10e265c..464389b28900 100644 --- a/drivers/tty/serial/8250/8250_ingenic.c +++ b/drivers/tty/serial/8250/8250_ingenic.c @@ -50,17 +50,17 @@ static const struct of_device_id of_match[]; static struct earlycon_device *early_device; -static uint8_t __init early_in(struct uart_port *port, int offset) +static uint8_t early_in(struct uart_port *port, int offset) { return readl(port->membase + (offset << 2)); } -static void __init early_out(struct uart_port *port, int offset, uint8_t value) +static void early_out(struct uart_port *port, int offset, uint8_t value) { writel(value, port->membase + (offset << 2)); } -static void __init ingenic_early_console_putc(struct uart_port *port, int c) +static void ingenic_early_console_putc(struct uart_port *port, int c) { uint8_t lsr; @@ -71,7 +71,7 @@ static void __init ingenic_early_console_putc(struct uart_port *port, int c) early_out(port, UART_TX, c); } -static void __init ingenic_early_console_write(struct console *console, +static void ingenic_early_console_write(struct console *console, const char *s, unsigned int count) { uart_console_write(&early_device->port, s, count, diff --git a/drivers/tty/serial/8250/8250_men_mcb.c b/drivers/tty/serial/8250/8250_men_mcb.c new file mode 100644 index 000000000000..308977807994 --- /dev/null +++ b/drivers/tty/serial/8250/8250_men_mcb.c @@ -0,0 +1,118 @@ +#include <linux/device.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/mcb.h> +#include <linux/serial.h> +#include <linux/serial_core.h> +#include <linux/serial_8250.h> +#include <uapi/linux/serial_core.h> + +struct serial_8250_men_mcb_data { + struct uart_8250_port uart; + int line; +}; + +/* + * The Z125 16550-compatible UART has no fixed base clock assigned + * So, depending on the board we're on, we need to adjust the + * parameter in order to really set the correct baudrate, and + * do so if possible without user interaction + */ +static u32 men_z125_lookup_uartclk(struct mcb_device *mdev) +{ + /* use default value if board is not available below */ + u32 clkval = 1041666; + + dev_info(&mdev->dev, "%s on board %s\n", + dev_name(&mdev->dev), + mdev->bus->name); + if (strncmp(mdev->bus->name, "F075", 4) == 0) + clkval = 1041666; + else if (strncmp(mdev->bus->name, "F216", 4) == 0) + clkval = 1843200; + else if (strncmp(mdev->bus->name, "G215", 4) == 0) + clkval = 1843200; + else + dev_info(&mdev->dev, + "board not detected, using default uartclk\n"); + + clkval = clkval << 4; + + return clkval; +} + +static int serial_8250_men_mcb_probe(struct mcb_device *mdev, + const struct mcb_device_id *id) +{ + struct serial_8250_men_mcb_data *data; + struct resource *mem; + + data = devm_kzalloc(&mdev->dev, + sizeof(struct serial_8250_men_mcb_data), + GFP_KERNEL); + if (!data) + return -ENOMEM; + + mcb_set_drvdata(mdev, data); + data->uart.port.dev = mdev->dma_dev; + spin_lock_init(&data->uart.port.lock); + + data->uart.port.type = PORT_16550; + data->uart.port.flags = UPF_SKIP_TEST | UPF_SHARE_IRQ | UPF_FIXED_TYPE; + data->uart.port.iotype = UPIO_MEM; + data->uart.port.uartclk = men_z125_lookup_uartclk(mdev); + data->uart.port.regshift = 0; + data->uart.port.fifosize = 60; + + mem = mcb_get_resource(mdev, IORESOURCE_MEM); + if (mem == NULL) + return -ENXIO; + + data->uart.port.irq = mcb_get_irq(mdev); + + data->uart.port.membase = devm_ioremap_resource(&mdev->dev, mem); + if (IS_ERR(data->uart.port.membase)) + return PTR_ERR_OR_ZERO(data->uart.port.membase); + + data->uart.port.mapbase = (unsigned long) mem->start; + data->uart.port.iobase = data->uart.port.mapbase; + + /* ok, register the port */ + data->line = serial8250_register_8250_port(&data->uart); + if (data->line < 0) + return data->line; + + dev_info(&mdev->dev, "found 16Z125 UART: ttyS%d\n", data->line); + + return 0; +} + +static void serial_8250_men_mcb_remove(struct mcb_device *mdev) +{ + struct serial_8250_men_mcb_data *data = mcb_get_drvdata(mdev); + + if (data) + serial8250_unregister_port(data->line); +} + +static const struct mcb_device_id serial_8250_men_mcb_ids[] = { + { .device = 0x7d }, + { } +}; +MODULE_DEVICE_TABLE(mcb, serial_8250_men_mcb_ids); + +static struct mcb_driver mcb_driver = { + .driver = { + .name = "8250_men_mcb", + .owner = THIS_MODULE, + }, + .probe = serial_8250_men_mcb_probe, + .remove = serial_8250_men_mcb_remove, + .id_table = serial_8250_men_mcb_ids, +}; +module_mcb_driver(mcb_driver); + +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("MEN 16z125 8250 UART driver"); +MODULE_AUTHOR("Michael Moese <michael.moese@men.de"); +MODULE_ALIAS("mcb:16z125"); diff --git a/drivers/tty/serial/8250/8250_mtk.c b/drivers/tty/serial/8250/8250_mtk.c index ce0cc471bfc3..fb45770d47aa 100644 --- a/drivers/tty/serial/8250/8250_mtk.c +++ b/drivers/tty/serial/8250/8250_mtk.c @@ -171,10 +171,7 @@ static int mtk8250_probe_of(struct platform_device *pdev, struct uart_port *p, } data->bus_clk = devm_clk_get(&pdev->dev, "bus"); - if (IS_ERR(data->bus_clk)) - return PTR_ERR(data->bus_clk); - - return 0; + return PTR_ERR_OR_ZERO(data->bus_clk); } static int mtk8250_probe(struct platform_device *pdev) diff --git a/drivers/tty/serial/8250/8250_of.c b/drivers/tty/serial/8250/8250_of.c index 0cf95fddccfc..1222c005fb98 100644 --- a/drivers/tty/serial/8250/8250_of.c +++ b/drivers/tty/serial/8250/8250_of.c @@ -18,6 +18,7 @@ #include <linux/of_address.h> #include <linux/of_irq.h> #include <linux/of_platform.h> +#include <linux/pm_runtime.h> #include <linux/clk.h> #include <linux/reset.h> @@ -65,6 +66,10 @@ static int of_platform_serial_setup(struct platform_device *ofdev, int ret; memset(port, 0, sizeof *port); + + pm_runtime_enable(&ofdev->dev); + pm_runtime_get_sync(&ofdev->dev); + if (of_property_read_u32(np, "clock-frequency", &clk)) { /* Get clk rate through clk driver if present */ @@ -72,12 +77,13 @@ static int of_platform_serial_setup(struct platform_device *ofdev, if (IS_ERR(info->clk)) { dev_warn(&ofdev->dev, "clk or clock-frequency not defined\n"); - return PTR_ERR(info->clk); + ret = PTR_ERR(info->clk); + goto err_pmruntime; } ret = clk_prepare_enable(info->clk); if (ret < 0) - return ret; + goto err_pmruntime; clk = clk_get_rate(info->clk); } @@ -88,7 +94,7 @@ static int of_platform_serial_setup(struct platform_device *ofdev, ret = of_address_to_resource(np, 0, &resource); if (ret) { dev_warn(&ofdev->dev, "invalid address\n"); - goto out; + goto err_unprepare; } spin_lock_init(&port->lock); @@ -130,23 +136,23 @@ static int of_platform_serial_setup(struct platform_device *ofdev, dev_warn(&ofdev->dev, "unsupported reg-io-width (%d)\n", prop); ret = -EINVAL; - goto out; + goto err_dispose; } } info->rst = devm_reset_control_get_optional_shared(&ofdev->dev, NULL); if (IS_ERR(info->rst)) - goto out; + goto err_dispose; ret = reset_control_deassert(info->rst); if (ret) - goto out; + goto err_dispose; port->type = type; port->uartclk = clk; port->flags = UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF | UPF_IOREMAP | UPF_FIXED_PORT | UPF_FIXED_TYPE; - if (of_find_property(np, "no-loopback-test", NULL)) + if (of_property_read_bool(np, "no-loopback-test")) port->flags |= UPF_SKIP_TEST; port->dev = &ofdev->dev; @@ -167,9 +173,13 @@ static int of_platform_serial_setup(struct platform_device *ofdev, port->handle_irq = fsl8250_handle_irq; return 0; -out: - if (info->clk) - clk_disable_unprepare(info->clk); +err_dispose: + irq_dispose_mapping(port->irq); +err_unprepare: + clk_disable_unprepare(info->clk); +err_pmruntime: + pm_runtime_put_sync(&ofdev->dev); + pm_runtime_disable(&ofdev->dev); return ret; } @@ -190,7 +200,7 @@ static int of_platform_serial_probe(struct platform_device *ofdev) if (!match) return -EINVAL; - if (of_find_property(ofdev->dev.of_node, "used-by-rtas", NULL)) + if (of_property_read_bool(ofdev->dev.of_node, "used-by-rtas")) return -EBUSY; info = kzalloc(sizeof(*info), GFP_KERNEL); @@ -201,7 +211,7 @@ static int of_platform_serial_probe(struct platform_device *ofdev) memset(&port8250, 0, sizeof(port8250)); ret = of_platform_serial_setup(ofdev, port_type, &port8250.port, info); if (ret) - goto out; + goto err_free; if (port8250.port.fifosize) port8250.capabilities = UART_CAP_FIFO; @@ -217,15 +227,19 @@ static int of_platform_serial_probe(struct platform_device *ofdev) ret = serial8250_register_8250_port(&port8250); if (ret < 0) - goto out; + goto err_dispose; info->type = port_type; info->line = ret; platform_set_drvdata(ofdev, info); return 0; -out: - kfree(info); +err_dispose: irq_dispose_mapping(port8250.port.irq); + pm_runtime_put_sync(&ofdev->dev); + pm_runtime_disable(&ofdev->dev); + clk_disable_unprepare(info->clk); +err_free: + kfree(info); return ret; } @@ -239,8 +253,9 @@ static int of_platform_serial_remove(struct platform_device *ofdev) serial8250_unregister_port(info->line); reset_control_assert(info->rst); - if (info->clk) - clk_disable_unprepare(info->clk); + pm_runtime_put_sync(&ofdev->dev); + pm_runtime_disable(&ofdev->dev); + clk_disable_unprepare(info->clk); kfree(info); return 0; } @@ -254,9 +269,10 @@ static int of_serial_suspend(struct device *dev) serial8250_suspend_port(info->line); - if (info->clk && (!uart_console(port) || console_suspend_enabled)) + if (!uart_console(port) || console_suspend_enabled) { + pm_runtime_put_sync(dev); clk_disable_unprepare(info->clk); - + } return 0; } @@ -266,8 +282,10 @@ static int of_serial_resume(struct device *dev) struct uart_8250_port *port8250 = serial8250_get_port(info->line); struct uart_port *port = &port8250->port; - if (info->clk && (!uart_console(port) || console_suspend_enabled)) + if (!uart_console(port) || console_suspend_enabled) { + pm_runtime_get_sync(dev); clk_prepare_enable(info->clk); + } serial8250_resume_port(info->line); @@ -295,6 +313,8 @@ static const struct of_device_id of_platform_serial_table[] = { .data = (void *)PORT_ALTR_16550_F64, }, { .compatible = "altr,16550-FIFO128", .data = (void *)PORT_ALTR_16550_F128, }, + { .compatible = "mediatek,mtk-btif", + .data = (void *)PORT_MTK_BTIF, }, { .compatible = "mrvl,mmp-uart", .data = (void *)PORT_XSCALE, }, { .compatible = "ti,da830-uart", .data = (void *)PORT_DA830, }, diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c index 00e51a064388..0c101a7470b0 100644 --- a/drivers/tty/serial/8250/8250_pci.c +++ b/drivers/tty/serial/8250/8250_pci.c @@ -1548,7 +1548,7 @@ static int skip_tx_en_setup(struct serial_private *priv, const struct pciserial_board *board, struct uart_8250_port *port, int idx) { - port->port.flags |= UPF_NO_TXEN_TEST; + port->port.quirks |= UPQ_NO_TXEN_TEST; dev_dbg(&priv->dev->dev, "serial8250: skipping TxEn test for device [%04x:%04x] subsystem [%04x:%04x]\n", priv->dev->vendor, priv->dev->device, @@ -3384,17 +3384,8 @@ static const struct pci_device_id blacklist[] = { { PCI_VDEVICE(COMMTECH, PCI_ANY_ID), }, }; -/* - * Given a complete unknown PCI device, try to use some heuristics to - * guess what the configuration might be, based on the pitiful PCI - * serial specs. Returns 0 on success, 1 on failure. - */ -static int -serial_pci_guess_board(struct pci_dev *dev, struct pciserial_board *board) +static int serial_pci_is_class_communication(struct pci_dev *dev) { - const struct pci_device_id *bldev; - int num_iomem, num_port, first_port = -1, i; - /* * If it is not a communications device or the programming * interface is greater than 6, give up. @@ -3407,6 +3398,13 @@ serial_pci_guess_board(struct pci_dev *dev, struct pciserial_board *board) (dev->class & 0xff) > 6) return -ENODEV; + return 0; +} + +static int serial_pci_is_blacklisted(struct pci_dev *dev) +{ + const struct pci_device_id *bldev; + /* * Do not access blacklisted devices that are known not to * feature serial ports or are handled by other modules. @@ -3419,6 +3417,19 @@ serial_pci_guess_board(struct pci_dev *dev, struct pciserial_board *board) return -ENODEV; } + return 0; +} + +/* + * Given a complete unknown PCI device, try to use some heuristics to + * guess what the configuration might be, based on the pitiful PCI + * serial specs. Returns 0 on success, -ENODEV on failure. + */ +static int +serial_pci_guess_board(struct pci_dev *dev, struct pciserial_board *board) +{ + int num_iomem, num_port, first_port = -1, i; + num_iomem = num_port = 0; for (i = 0; i < PCI_NUM_BAR_RESOURCES; i++) { if (pci_resource_flags(dev, i) & IORESOURCE_IO) { @@ -3639,6 +3650,14 @@ pciserial_init_one(struct pci_dev *dev, const struct pci_device_id *ent) board = &pci_boards[ent->driver_data]; + rc = serial_pci_is_class_communication(dev); + if (rc) + return rc; + + rc = serial_pci_is_blacklisted(dev); + if (rc) + return rc; + rc = pcim_enable_device(dev); pci_save_state(dev); if (rc) @@ -3723,7 +3742,7 @@ static int pciserial_resume_one(struct device *dev) static SIMPLE_DEV_PM_OPS(pciserial_pm_ops, pciserial_suspend_one, pciserial_resume_one); -static struct pci_device_id serial_pci_tbl[] = { +static const struct pci_device_id serial_pci_tbl[] = { /* Advantech use PCI_DEVICE_ID_ADVANTECH_PCI3620 (0x3620) as 'PCI_SUBVENDOR_ID' */ { PCI_VENDOR_ID_ADVANTECH, PCI_DEVICE_ID_ADVANTECH_PCI3620, PCI_DEVICE_ID_ADVANTECH_PCI3620, 0x0001, 0, 0, diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c index a5fe0e66c607..f0cc04f62b67 100644 --- a/drivers/tty/serial/8250/8250_port.c +++ b/drivers/tty/serial/8250/8250_port.c @@ -37,7 +37,7 @@ #include <linux/slab.h> #include <linux/uaccess.h> #include <linux/pm_runtime.h> -#include <linux/timer.h> +#include <linux/ktime.h> #include <asm/io.h> #include <asm/irq.h> @@ -289,6 +289,14 @@ static const struct serial8250_config uart_config[] = { .rxtrig_bytes = {1, 4, 8, 14}, .flags = UART_CAP_FIFO | UART_CAP_AFE, }, + [PORT_MTK_BTIF] = { + .name = "MediaTek BTIF", + .fifo_size = 16, + .tx_loadsz = 16, + .fcr = UART_FCR_ENABLE_FIFO | + UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT, + .flags = UART_CAP_FIFO, + }, }; /* Uart divisor latch read */ @@ -553,8 +561,8 @@ static inline void serial8250_em485_rts_after_send(struct uart_8250_port *p) serial8250_out_MCR(p, mcr); } -static void serial8250_em485_handle_start_tx(unsigned long arg); -static void serial8250_em485_handle_stop_tx(unsigned long arg); +static enum hrtimer_restart serial8250_em485_handle_start_tx(struct hrtimer *t); +static enum hrtimer_restart serial8250_em485_handle_stop_tx(struct hrtimer *t); void serial8250_clear_and_reinit_fifos(struct uart_8250_port *p) { @@ -609,12 +617,14 @@ int serial8250_em485_init(struct uart_8250_port *p) if (!p->em485) return -ENOMEM; - setup_timer(&p->em485->stop_tx_timer, - serial8250_em485_handle_stop_tx, (unsigned long)p); - setup_timer(&p->em485->start_tx_timer, - serial8250_em485_handle_start_tx, (unsigned long)p); + hrtimer_init(&p->em485->stop_tx_timer, CLOCK_MONOTONIC, + HRTIMER_MODE_REL); + hrtimer_init(&p->em485->start_tx_timer, CLOCK_MONOTONIC, + HRTIMER_MODE_REL); + p->em485->stop_tx_timer.function = &serial8250_em485_handle_stop_tx; + p->em485->start_tx_timer.function = &serial8250_em485_handle_start_tx; + p->em485->port = p; p->em485->active_timer = NULL; - serial8250_em485_rts_after_send(p); return 0; @@ -639,8 +649,8 @@ void serial8250_em485_destroy(struct uart_8250_port *p) if (!p->em485) return; - del_timer(&p->em485->start_tx_timer); - del_timer(&p->em485->stop_tx_timer); + hrtimer_cancel(&p->em485->start_tx_timer); + hrtimer_cancel(&p->em485->stop_tx_timer); kfree(p->em485); p->em485 = NULL; @@ -1435,22 +1445,33 @@ static void __do_stop_tx_rs485(struct uart_8250_port *p) serial_port_out(&p->port, UART_IER, p->ier); } } - -static void serial8250_em485_handle_stop_tx(unsigned long arg) +static enum hrtimer_restart serial8250_em485_handle_stop_tx(struct hrtimer *t) { - struct uart_8250_port *p = (struct uart_8250_port *)arg; - struct uart_8250_em485 *em485 = p->em485; + struct uart_8250_em485 *em485; + struct uart_8250_port *p; unsigned long flags; + em485 = container_of(t, struct uart_8250_em485, stop_tx_timer); + p = em485->port; + serial8250_rpm_get(p); spin_lock_irqsave(&p->port.lock, flags); - if (em485 && - em485->active_timer == &em485->stop_tx_timer) { + if (em485->active_timer == &em485->stop_tx_timer) { __do_stop_tx_rs485(p); em485->active_timer = NULL; } spin_unlock_irqrestore(&p->port.lock, flags); serial8250_rpm_put(p); + return HRTIMER_NORESTART; +} + +static void start_hrtimer_ms(struct hrtimer *hrt, unsigned long msec) +{ + long sec = msec / 1000; + long nsec = (msec % 1000) * 1000000; + ktime_t t = ktime_set(sec, nsec); + + hrtimer_start(hrt, t, HRTIMER_MODE_REL); } static void __stop_tx_rs485(struct uart_8250_port *p) @@ -1463,8 +1484,8 @@ static void __stop_tx_rs485(struct uart_8250_port *p) */ if (p->port.rs485.delay_rts_after_send > 0) { em485->active_timer = &em485->stop_tx_timer; - mod_timer(&em485->stop_tx_timer, jiffies + - p->port.rs485.delay_rts_after_send * HZ / 1000); + start_hrtimer_ms(&em485->stop_tx_timer, + p->port.rs485.delay_rts_after_send); } else { __do_stop_tx_rs485(p); } @@ -1494,8 +1515,8 @@ static inline void __stop_tx(struct uart_8250_port *p) if ((lsr & BOTH_EMPTY) != BOTH_EMPTY) return; - del_timer(&em485->start_tx_timer); em485->active_timer = NULL; + hrtimer_cancel(&em485->start_tx_timer); __stop_tx_rs485(p); } @@ -1558,8 +1579,9 @@ static inline void start_tx_rs485(struct uart_port *port) if (!(up->port.rs485.flags & SER_RS485_RX_DURING_TX)) serial8250_stop_rx(&up->port); - del_timer(&em485->stop_tx_timer); em485->active_timer = NULL; + if (hrtimer_is_queued(&em485->stop_tx_timer)) + hrtimer_cancel(&em485->stop_tx_timer); mcr = serial8250_in_MCR(up); if (!!(up->port.rs485.flags & SER_RS485_RTS_ON_SEND) != @@ -1572,8 +1594,8 @@ static inline void start_tx_rs485(struct uart_port *port) if (up->port.rs485.delay_rts_before_send > 0) { em485->active_timer = &em485->start_tx_timer; - mod_timer(&em485->start_tx_timer, jiffies + - up->port.rs485.delay_rts_before_send * HZ / 1000); + start_hrtimer_ms(&em485->start_tx_timer, + up->port.rs485.delay_rts_before_send); return; } } @@ -1581,19 +1603,22 @@ static inline void start_tx_rs485(struct uart_port *port) __start_tx(port); } -static void serial8250_em485_handle_start_tx(unsigned long arg) +static enum hrtimer_restart serial8250_em485_handle_start_tx(struct hrtimer *t) { - struct uart_8250_port *p = (struct uart_8250_port *)arg; - struct uart_8250_em485 *em485 = p->em485; + struct uart_8250_em485 *em485; + struct uart_8250_port *p; unsigned long flags; + em485 = container_of(t, struct uart_8250_em485, start_tx_timer); + p = em485->port; + spin_lock_irqsave(&p->port.lock, flags); - if (em485 && - em485->active_timer == &em485->start_tx_timer) { + if (em485->active_timer == &em485->start_tx_timer) { __start_tx(&p->port); em485->active_timer = NULL; } spin_unlock_irqrestore(&p->port.lock, flags); + return HRTIMER_NORESTART; } static void serial8250_start_tx(struct uart_port *port) @@ -2304,7 +2329,7 @@ int serial8250_do_startup(struct uart_port *port) * test if we receive TX irq. This way, we'll never enable * UART_BUG_TXEN. */ - if (up->port.flags & UPF_NO_TXEN_TEST) + if (up->port.quirks & UPQ_NO_TXEN_TEST) goto dont_test_tx_en; /* diff --git a/drivers/tty/serial/8250/8250_uniphier.c b/drivers/tty/serial/8250/8250_uniphier.c index 746680ebf90c..8a10b10e27aa 100644 --- a/drivers/tty/serial/8250/8250_uniphier.c +++ b/drivers/tty/serial/8250/8250_uniphier.c @@ -29,12 +29,13 @@ * - MMIO32 (regshift = 2) * - FCR is not at 2, but 3 * - LCR and MCR are not at 3 and 4, they share 4 + * - No SCR (Instead, CHAR can be used as a scratch register) * - Divisor latch at 9, no divisor latch access bit */ #define UNIPHIER_UART_REGSHIFT 2 -/* bit[15:8] = CHAR (not used), bit[7:0] = FCR */ +/* bit[15:8] = CHAR, bit[7:0] = FCR */ #define UNIPHIER_UART_CHAR_FCR (3 << (UNIPHIER_UART_REGSHIFT)) /* bit[15:8] = LCR, bit[7:0] = MCR */ #define UNIPHIER_UART_LCR_MCR (4 << (UNIPHIER_UART_REGSHIFT)) @@ -72,13 +73,18 @@ OF_EARLYCON_DECLARE(uniphier, "socionext,uniphier-uart", /* * The register map is slightly different from that of 8250. - * IO callbacks must be overridden for correct access to FCR, LCR, and MCR. + * IO callbacks must be overridden for correct access to FCR, LCR, MCR and SCR. */ static unsigned int uniphier_serial_in(struct uart_port *p, int offset) { unsigned int valshift = 0; switch (offset) { + case UART_SCR: + /* No SCR for this hardware. Use CHAR as a scratch register */ + valshift = 8; + offset = UNIPHIER_UART_CHAR_FCR; + break; case UART_LCR: valshift = 8; /* fall through */ @@ -91,8 +97,8 @@ static unsigned int uniphier_serial_in(struct uart_port *p, int offset) } /* - * The return value must be masked with 0xff because LCR and MCR reside - * in the same register that must be accessed by 32-bit write/read. + * The return value must be masked with 0xff because some registers + * share the same offset that must be accessed by 32-bit write/read. * 8 or 16 bit access to this hardware result in unexpected behavior. */ return (readl(p->membase + offset) >> valshift) & 0xff; @@ -101,9 +107,13 @@ static unsigned int uniphier_serial_in(struct uart_port *p, int offset) static void uniphier_serial_out(struct uart_port *p, int offset, int value) { unsigned int valshift = 0; - bool normal = true; + bool normal = false; switch (offset) { + case UART_SCR: + /* No SCR for this hardware. Use CHAR as a scratch register */ + valshift = 8; + /* fall through */ case UART_FCR: offset = UNIPHIER_UART_CHAR_FCR; break; @@ -114,10 +124,10 @@ static void uniphier_serial_out(struct uart_port *p, int offset, int value) /* fall through */ case UART_MCR: offset = UNIPHIER_UART_LCR_MCR; - normal = false; break; default: offset <<= UNIPHIER_UART_REGSHIFT; + normal = true; break; } @@ -169,7 +179,7 @@ static int uniphier_of_serial_setup(struct device *dev, struct uart_port *port, dev_err(dev, "failed to get alias id\n"); return ret; } - port->line = priv->line = ret; + port->line = ret; /* Get clk rate through clk driver */ priv->clk = devm_clk_get(dev, NULL); @@ -249,8 +259,8 @@ static int uniphier_uart_probe(struct platform_device *pdev) up.dl_read = uniphier_serial_dl_read; up.dl_write = uniphier_serial_dl_write; - ret = serial8250_register_8250_port(&up); - if (ret < 0) { + priv->line = serial8250_register_8250_port(&up); + if (priv->line < 0) { dev_err(dev, "failed to register 8250 port\n"); clk_disable_unprepare(priv->clk); return ret; @@ -271,6 +281,40 @@ static int uniphier_uart_remove(struct platform_device *pdev) return 0; } +static int __maybe_unused uniphier_uart_suspend(struct device *dev) +{ + struct uniphier8250_priv *priv = dev_get_drvdata(dev); + struct uart_8250_port *up = serial8250_get_port(priv->line); + + serial8250_suspend_port(priv->line); + + if (!uart_console(&up->port) || console_suspend_enabled) + clk_disable_unprepare(priv->clk); + + return 0; +} + +static int __maybe_unused uniphier_uart_resume(struct device *dev) +{ + struct uniphier8250_priv *priv = dev_get_drvdata(dev); + struct uart_8250_port *up = serial8250_get_port(priv->line); + int ret; + + if (!uart_console(&up->port) || console_suspend_enabled) { + ret = clk_prepare_enable(priv->clk); + if (ret) + return ret; + } + + serial8250_resume_port(priv->line); + + return 0; +} + +static const struct dev_pm_ops uniphier_uart_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(uniphier_uart_suspend, uniphier_uart_resume) +}; + static const struct of_device_id uniphier_uart_match[] = { { .compatible = "socionext,uniphier-uart" }, { /* sentinel */ } @@ -283,6 +327,7 @@ static struct platform_driver uniphier_uart_platform_driver = { .driver = { .name = "uniphier-uart", .of_match_table = uniphier_uart_match, + .pm = &uniphier_uart_pm_ops, }, }; module_platform_driver(uniphier_uart_platform_driver); diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig index a1161ec0256f..a5c0ef1e7695 100644 --- a/drivers/tty/serial/8250/Kconfig +++ b/drivers/tty/serial/8250/Kconfig @@ -155,6 +155,17 @@ config SERIAL_8250_CS If unsure, say N. +config SERIAL_8250_MEN_MCB + tristate "MEN Z125 UART device support" + depends on MCB && SERIAL_8250 + help + This enables support for FPGA based UARTs found on many MEN + boards. This driver enables support for the Z125 UARTs. + + To compile this driver as a module, chose M here: the + module will be called 8250_men_mcb. + + config SERIAL_8250_NR_UARTS int "Maximum number of 8250/16550 serial ports" depends on SERIAL_8250 diff --git a/drivers/tty/serial/8250/Makefile b/drivers/tty/serial/8250/Makefile index a44a99a3e623..6a18d2d768fe 100644 --- a/drivers/tty/serial/8250/Makefile +++ b/drivers/tty/serial/8250/Makefile @@ -23,6 +23,7 @@ obj-$(CONFIG_SERIAL_8250_BOCA) += 8250_boca.o obj-$(CONFIG_SERIAL_8250_EXAR_ST16C554) += 8250_exar_st16c554.o obj-$(CONFIG_SERIAL_8250_HUB6) += 8250_hub6.o obj-$(CONFIG_SERIAL_8250_FSL) += 8250_fsl.o +obj-$(CONFIG_SERIAL_8250_MEN_MCB) += 8250_men_mcb.o obj-$(CONFIG_SERIAL_8250_DW) += 8250_dw.o obj-$(CONFIG_SERIAL_8250_EM) += 8250_em.o obj-$(CONFIG_SERIAL_8250_OMAP) += 8250_omap.o diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index 1f096e2bb398..b788fee54249 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -1689,7 +1689,7 @@ config SERIAL_MVEBU_CONSOLE Otherwise, say 'N'. config SERIAL_OWL - bool "Actions Semi Owl serial port support" + tristate "Actions Semi Owl serial port support" depends on ARCH_ACTIONS || COMPILE_TEST select SERIAL_CORE help @@ -1705,7 +1705,7 @@ config SERIAL_OWL_CONSOLE default y help Say 'Y' here if you wish to use Actions Semiconductor S500/S900 UART - as the system console. Only earlycon is implemented currently. + as the system console. endmenu diff --git a/drivers/tty/serial/amba-pl010.c b/drivers/tty/serial/amba-pl010.c index 24180adb1cbb..9ec4b8d2879f 100644 --- a/drivers/tty/serial/amba-pl010.c +++ b/drivers/tty/serial/amba-pl010.c @@ -814,7 +814,7 @@ static int pl010_resume(struct device *dev) static SIMPLE_DEV_PM_OPS(pl010_dev_pm_ops, pl010_suspend, pl010_resume); -static struct amba_id pl010_ids[] = { +static const struct amba_id pl010_ids[] = { { .id = 0x00041010, .mask = 0x000fffff, diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c index 1888d168a41c..111e6a950779 100644 --- a/drivers/tty/serial/amba-pl011.c +++ b/drivers/tty/serial/amba-pl011.c @@ -128,7 +128,7 @@ static struct vendor_data vendor_arm = { .get_fifosize = get_fifosize_arm, }; -static struct vendor_data vendor_sbsa = { +static const struct vendor_data vendor_sbsa = { .reg_offset = pl011_std_offsets, .fr_busy = UART01x_FR_BUSY, .fr_dsr = UART01x_FR_DSR, @@ -143,7 +143,7 @@ static struct vendor_data vendor_sbsa = { }; #ifdef CONFIG_ACPI_SPCR_TABLE -static struct vendor_data vendor_qdt_qdf2400_e44 = { +static const struct vendor_data vendor_qdt_qdf2400_e44 = { .reg_offset = pl011_std_offsets, .fr_busy = UART011_FR_TXFE, .fr_dsr = UART01x_FR_DSR, @@ -2787,7 +2787,7 @@ static struct platform_driver arm_sbsa_uart_platform_driver = { }, }; -static struct amba_id pl011_ids[] = { +static const struct amba_id pl011_ids[] = { { .id = 0x00041011, .mask = 0x000fffff, diff --git a/drivers/tty/serial/apbuart.c b/drivers/tty/serial/apbuart.c index 75eb083b3361..dd60ed96a0ad 100644 --- a/drivers/tty/serial/apbuart.c +++ b/drivers/tty/serial/apbuart.c @@ -325,7 +325,7 @@ static int apbuart_verify_port(struct uart_port *port, return ret; } -static struct uart_ops grlib_apbuart_ops = { +static const struct uart_ops grlib_apbuart_ops = { .tx_empty = apbuart_tx_empty, .set_mctrl = apbuart_set_mctrl, .get_mctrl = apbuart_get_mctrl, diff --git a/drivers/tty/serial/arc_uart.c b/drivers/tty/serial/arc_uart.c index 5ac06fcaa9c6..77fe306690c4 100644 --- a/drivers/tty/serial/arc_uart.c +++ b/drivers/tty/serial/arc_uart.c @@ -549,8 +549,8 @@ static struct console arc_console = { .data = &arc_uart_driver }; -static __init void arc_early_serial_write(struct console *con, const char *s, - unsigned int n) +static void arc_early_serial_write(struct console *con, const char *s, + unsigned int n) { struct earlycon_device *dev = con->data; diff --git a/drivers/tty/serial/cpm_uart/cpm_uart_core.c b/drivers/tty/serial/cpm_uart/cpm_uart_core.c index f6bcc19c99d5..9ac142cfc1f1 100644 --- a/drivers/tty/serial/cpm_uart/cpm_uart_core.c +++ b/drivers/tty/serial/cpm_uart/cpm_uart_core.c @@ -1123,7 +1123,7 @@ static void cpm_put_poll_char(struct uart_port *port, } #endif /* CONFIG_CONSOLE_POLL */ -static struct uart_ops cpm_uart_pops = { +static const struct uart_ops cpm_uart_pops = { .tx_empty = cpm_uart_tx_empty, .set_mctrl = cpm_uart_set_mctrl, .get_mctrl = cpm_uart_get_mctrl, diff --git a/drivers/tty/serial/earlycon.c b/drivers/tty/serial/earlycon.c index c3651540e1ba..98928f082d87 100644 --- a/drivers/tty/serial/earlycon.c +++ b/drivers/tty/serial/earlycon.c @@ -220,7 +220,7 @@ static int __init param_setup_earlycon(char *buf) if (IS_ENABLED(CONFIG_ACPI_SPCR_TABLE)) { earlycon_init_is_deferred = true; return 0; - } else { + } else if (!buf) { return early_init_dt_scan_chosen_stdout(); } } @@ -282,7 +282,12 @@ int __init of_setup_earlycon(const struct earlycon_id *match, } } + val = of_get_flat_dt_prop(node, "current-speed", NULL); + if (val) + early_console_dev.baud = be32_to_cpu(*val); + if (options) { + early_console_dev.baud = simple_strtoul(options, NULL, 0); strlcpy(early_console_dev.options, options, sizeof(early_console_dev.options)); } diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c index 898dcb091a27..849c1f9991ce 100644 --- a/drivers/tty/serial/fsl_lpuart.c +++ b/drivers/tty/serial/fsl_lpuart.c @@ -117,7 +117,7 @@ #define UARTSFIFO_TXOF 0x02 #define UARTSFIFO_RXUF 0x01 -/* 32-bit register defination */ +/* 32-bit register definition */ #define UARTBAUD 0x00 #define UARTSTAT 0x04 #define UARTCTRL 0x08 @@ -521,6 +521,57 @@ static int lpuart_poll_get_char(struct uart_port *port) return readb(port->membase + UARTDR); } +static int lpuart32_poll_init(struct uart_port *port) +{ + unsigned long flags; + struct lpuart_port *sport = container_of(port, struct lpuart_port, port); + u32 temp; + + sport->port.fifosize = 0; + + spin_lock_irqsave(&sport->port.lock, flags); + + /* Disable Rx & Tx */ + writel(0, sport->port.membase + UARTCTRL); + + temp = readl(sport->port.membase + UARTFIFO); + + /* Enable Rx and Tx FIFO */ + writel(temp | UARTFIFO_RXFE | UARTFIFO_TXFE, + sport->port.membase + UARTFIFO); + + /* flush Tx and Rx FIFO */ + writel(UARTFIFO_TXFLUSH | UARTFIFO_RXFLUSH, + sport->port.membase + UARTFIFO); + + /* explicitly clear RDRF */ + if (readl(sport->port.membase + UARTSTAT) & UARTSTAT_RDRF) { + readl(sport->port.membase + UARTDATA); + writel(UARTFIFO_RXUF, sport->port.membase + UARTFIFO); + } + + /* Enable Rx and Tx */ + writel(UARTCTRL_RE | UARTCTRL_TE, sport->port.membase + UARTCTRL); + spin_unlock_irqrestore(&sport->port.lock, flags); + + return 0; +} + +static void lpuart32_poll_put_char(struct uart_port *port, unsigned char c) +{ + while (!(readl(port->membase + UARTSTAT) & UARTSTAT_TDRE)) + barrier(); + + writel(c, port->membase + UARTDATA); +} + +static int lpuart32_poll_get_char(struct uart_port *port) +{ + if (!(readl(port->membase + UARTSTAT) & UARTSTAT_RDRF)) + return NO_POLL_CHAR; + + return readl(port->membase + UARTDATA); +} #endif static inline void lpuart_transmit_buffer(struct lpuart_port *sport) @@ -1025,6 +1076,11 @@ static int lpuart_config_rs485(struct uart_port *port, ~(UARTMODEM_TXRTSPOL | UARTMODEM_TXRTSE); writeb(modem, sport->port.membase + UARTMODEM); + /* clear unsupported configurations */ + rs485->delay_rts_before_send = 0; + rs485->delay_rts_after_send = 0; + rs485->flags &= ~SER_RS485_RX_DURING_TX; + if (rs485->flags & SER_RS485_ENABLED) { /* Enable auto RS-485 RTS mode */ modem |= UARTMODEM_TXRTSE; @@ -1782,6 +1838,11 @@ static const struct uart_ops lpuart32_pops = { .config_port = lpuart_config_port, .verify_port = lpuart_verify_port, .flush_buffer = lpuart_flush_buffer, +#if defined(CONFIG_CONSOLE_POLL) + .poll_init = lpuart32_poll_init, + .poll_get_char = lpuart32_poll_get_char, + .poll_put_char = lpuart32_poll_put_char, +#endif }; static struct lpuart_port *lpuart_ports[UART_NR]; @@ -2203,6 +2264,7 @@ static int lpuart_suspend(struct device *dev) { struct lpuart_port *sport = dev_get_drvdata(dev); unsigned long temp; + bool irq_wake; if (lpuart_is_32(sport)) { /* disable Rx/Tx and interrupts */ @@ -2218,6 +2280,9 @@ static int lpuart_suspend(struct device *dev) uart_suspend_port(&lpuart_reg, &sport->port); + /* uart_suspend_port() might set wakeup flag */ + irq_wake = irqd_is_wakeup_set(irq_get_irq_data(sport->port.irq)); + if (sport->lpuart_dma_rx_use) { /* * EDMA driver during suspend will forcefully release any @@ -2226,7 +2291,7 @@ static int lpuart_suspend(struct device *dev) * cannot resume as as expected, hence gracefully release the * Rx DMA path before suspend and start Rx DMA path on resume. */ - if (sport->port.irq_wake) { + if (irq_wake) { del_timer_sync(&sport->lpuart_timer); lpuart_dma_rx_free(&sport->port); } @@ -2241,7 +2306,7 @@ static int lpuart_suspend(struct device *dev) dmaengine_terminate_all(sport->dma_tx_chan); } - if (sport->port.suspended && !sport->port.irq_wake) + if (sport->port.suspended && !irq_wake) clk_disable_unprepare(sport->clk); return 0; @@ -2250,9 +2315,10 @@ static int lpuart_suspend(struct device *dev) static int lpuart_resume(struct device *dev) { struct lpuart_port *sport = dev_get_drvdata(dev); + bool irq_wake = irqd_is_wakeup_set(irq_get_irq_data(sport->port.irq)); unsigned long temp; - if (sport->port.suspended && !sport->port.irq_wake) + if (sport->port.suspended && !irq_wake) clk_prepare_enable(sport->clk); if (lpuart_is_32(sport)) { @@ -2269,7 +2335,7 @@ static int lpuart_resume(struct device *dev) } if (sport->lpuart_dma_rx_use) { - if (sport->port.irq_wake) { + if (irq_wake) { if (!lpuart_start_rx_dma(sport)) rx_dma_timer_init(sport); else diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c index 80934e7bd67f..dfeff3951f93 100644 --- a/drivers/tty/serial/imx.c +++ b/drivers/tty/serial/imx.c @@ -226,7 +226,6 @@ struct imx_port { dma_cookie_t rx_cookie; unsigned int tx_bytes; unsigned int dma_tx_nents; - wait_queue_head_t dma_wait; unsigned int saved_reg[10]; bool context_saved; }; @@ -458,7 +457,10 @@ static inline void imx_transmit_buffer(struct imx_port *sport) } } - while (!uart_circ_empty(xmit) && !sport->dma_is_txing && + if (sport->dma_is_txing) + return; + + while (!uart_circ_empty(xmit) && !(readl(sport->port.membase + uts_reg(sport)) & UTS_TXFULL)) { /* send xmit->buf[xmit->tail] * out the port here */ @@ -498,20 +500,12 @@ static void dma_tx_callback(void *data) sport->dma_is_txing = 0; - spin_unlock_irqrestore(&sport->port.lock, flags); - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) uart_write_wakeup(&sport->port); - if (waitqueue_active(&sport->dma_wait)) { - wake_up(&sport->dma_wait); - dev_dbg(sport->port.dev, "exit in %s.\n", __func__); - return; - } - - spin_lock_irqsave(&sport->port.lock, flags); if (!uart_circ_empty(xmit) && !uart_tx_stopped(&sport->port)) imx_dma_tx(sport); + spin_unlock_irqrestore(&sport->port.lock, flags); } @@ -1208,8 +1202,6 @@ static void imx_enable_dma(struct imx_port *sport) { unsigned long temp; - init_waitqueue_head(&sport->dma_wait); - /* set UCR1 */ temp = readl(sport->port.membase + UCR1); temp |= UCR1_RDMAEN | UCR1_TDMAEN | UCR1_ATDMAEN; @@ -2332,6 +2324,7 @@ static int imx_serial_port_suspend(struct device *dev) serial_imx_enable_wakeup(sport, true); uart_suspend_port(&imx_reg, &sport->port); + disable_irq(sport->port.irq); /* Needed to enable clock in suspend_noirq */ return clk_prepare(sport->clk_ipg); @@ -2346,6 +2339,7 @@ static int imx_serial_port_resume(struct device *dev) serial_imx_enable_wakeup(sport, false); uart_resume_port(&imx_reg, &sport->port); + enable_irq(sport->port.irq); clk_unprepare(sport->clk_ipg); diff --git a/drivers/tty/serial/jsm/jsm_driver.c b/drivers/tty/serial/jsm/jsm_driver.c index a119f11bf2f4..102d499814ac 100644 --- a/drivers/tty/serial/jsm/jsm_driver.c +++ b/drivers/tty/serial/jsm/jsm_driver.c @@ -304,7 +304,7 @@ static void jsm_remove_one(struct pci_dev *pdev) kfree(brd); } -static struct pci_device_id jsm_pci_tbl[] = { +static const struct pci_device_id jsm_pci_tbl[] = { { PCI_DEVICE(PCI_VENDOR_ID_DIGI, PCI_DEVICE_ID_NEO_2DB9), 0, 0, 0 }, { PCI_DEVICE(PCI_VENDOR_ID_DIGI, PCI_DEVICE_ID_NEO_2DB9PRI), 0, 0, 1 }, { PCI_DEVICE(PCI_VENDOR_ID_DIGI, PCI_DEVICE_ID_NEO_2RJ45), 0, 0, 2 }, diff --git a/drivers/tty/serial/m32r_sio.c b/drivers/tty/serial/m32r_sio.c index 218b7118e85d..5b3bd9511993 100644 --- a/drivers/tty/serial/m32r_sio.c +++ b/drivers/tty/serial/m32r_sio.c @@ -854,7 +854,7 @@ m32r_sio_verify_port(struct uart_port *port, struct serial_struct *ser) return 0; } -static struct uart_ops m32r_sio_pops = { +static const struct uart_ops m32r_sio_pops = { .tx_empty = m32r_sio_tx_empty, .set_mctrl = m32r_sio_set_mctrl, .get_mctrl = m32r_sio_get_mctrl, diff --git a/drivers/tty/serial/meson_uart.c b/drivers/tty/serial/meson_uart.c index 42e4a4c7597f..07c0f98be3ac 100644 --- a/drivers/tty/serial/meson_uart.c +++ b/drivers/tty/serial/meson_uart.c @@ -424,7 +424,7 @@ static void meson_uart_config_port(struct uart_port *port, int flags) } } -static struct uart_ops meson_uart_ops = { +static const struct uart_ops meson_uart_ops = { .set_mctrl = meson_uart_set_mctrl, .get_mctrl = meson_uart_get_mctrl, .tx_empty = meson_uart_tx_empty, diff --git a/drivers/tty/serial/mpc52xx_uart.c b/drivers/tty/serial/mpc52xx_uart.c index 3970d6a9aaca..791c4c74f6d6 100644 --- a/drivers/tty/serial/mpc52xx_uart.c +++ b/drivers/tty/serial/mpc52xx_uart.c @@ -1347,7 +1347,7 @@ mpc52xx_uart_verify_port(struct uart_port *port, struct serial_struct *ser) } -static struct uart_ops mpc52xx_uart_ops = { +static const struct uart_ops mpc52xx_uart_ops = { .tx_empty = mpc52xx_uart_tx_empty, .set_mctrl = mpc52xx_uart_set_mctrl, .get_mctrl = mpc52xx_uart_get_mctrl, @@ -1634,8 +1634,8 @@ mpc52xx_console_setup(struct console *co, char *options) return -EINVAL; } - pr_debug("Console on ttyPSC%x is %s\n", - co->index, mpc52xx_uart_nodes[co->index]->full_name); + pr_debug("Console on ttyPSC%x is %pOF\n", + co->index, mpc52xx_uart_nodes[co->index]); /* Fetch register locations */ ret = of_address_to_resource(np, 0, &res); @@ -1755,8 +1755,8 @@ static int mpc52xx_uart_of_probe(struct platform_device *op) break; if (idx >= MPC52xx_PSC_MAXNUM) return -EINVAL; - pr_debug("Found %s assigned to ttyPSC%x\n", - mpc52xx_uart_nodes[idx]->full_name, idx); + pr_debug("Found %pOF assigned to ttyPSC%x\n", + mpc52xx_uart_nodes[idx], idx); /* set the uart clock to the input clock of the psc, the different * prescalers are taken into account in the set_baudrate() methods @@ -1881,8 +1881,8 @@ mpc52xx_uart_of_enumerate(void) for (i = 0; i < MPC52xx_PSC_MAXNUM; i++) { if (mpc52xx_uart_nodes[i]) - pr_debug("%s assigned to ttyPSC%x\n", - mpc52xx_uart_nodes[i]->full_name, i); + pr_debug("%pOF assigned to ttyPSC%x\n", + mpc52xx_uart_nodes[i], i); } } diff --git a/drivers/tty/serial/msm_serial.c b/drivers/tty/serial/msm_serial.c index 6788e7532dff..1db79ee8a886 100644 --- a/drivers/tty/serial/msm_serial.c +++ b/drivers/tty/serial/msm_serial.c @@ -1175,11 +1175,6 @@ static int msm_startup(struct uart_port *port) snprintf(msm_port->name, sizeof(msm_port->name), "msm_serial%d", port->line); - ret = request_irq(port->irq, msm_uart_irq, IRQF_TRIGGER_HIGH, - msm_port->name, port); - if (unlikely(ret)) - return ret; - msm_init_clock(port); if (likely(port->fifosize > 12)) @@ -1206,7 +1201,21 @@ static int msm_startup(struct uart_port *port) msm_request_rx_dma(msm_port, msm_port->uart.mapbase); } + ret = request_irq(port->irq, msm_uart_irq, IRQF_TRIGGER_HIGH, + msm_port->name, port); + if (unlikely(ret)) + goto err_irq; + return 0; + +err_irq: + if (msm_port->is_uartdm) + msm_release_dma(msm_port); + + clk_disable_unprepare(msm_port->pclk); + clk_disable_unprepare(msm_port->clk); + + return ret; } static void msm_shutdown(struct uart_port *port) diff --git a/drivers/tty/serial/mux.c b/drivers/tty/serial/mux.c index 8a4be4b73723..2bff69e70e4b 100644 --- a/drivers/tty/serial/mux.c +++ b/drivers/tty/serial/mux.c @@ -427,7 +427,7 @@ static struct console mux_console = { #define MUX_CONSOLE NULL #endif -static struct uart_ops mux_pops = { +static const struct uart_ops mux_pops = { .tx_empty = mux_tx_empty, .set_mctrl = mux_set_mctrl, .get_mctrl = mux_get_mctrl, @@ -503,7 +503,7 @@ static int __init mux_probe(struct parisc_device *dev) return 0; } -static int mux_remove(struct parisc_device *dev) +static int __exit mux_remove(struct parisc_device *dev) { int i, j; int port_count = (long)dev_get_drvdata(&dev->dev); @@ -536,13 +536,13 @@ static int mux_remove(struct parisc_device *dev) * This table only contains the parisc_device_id of known builtin mux * devices. All other mux cards will be detected by the generic mux_tbl. */ -static struct parisc_device_id builtin_mux_tbl[] = { +static const struct parisc_device_id builtin_mux_tbl[] __initconst = { { HPHW_A_DIRECT, HVERSION_REV_ANY_ID, 0x15, 0x0000D }, /* All K-class */ { HPHW_A_DIRECT, HVERSION_REV_ANY_ID, 0x44, 0x0000D }, /* E35, E45, and E55 */ { 0, } }; -static struct parisc_device_id mux_tbl[] = { +static const struct parisc_device_id mux_tbl[] __initconst = { { HPHW_A_DIRECT, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x0000D }, { 0, } }; @@ -550,18 +550,18 @@ static struct parisc_device_id mux_tbl[] = { MODULE_DEVICE_TABLE(parisc, builtin_mux_tbl); MODULE_DEVICE_TABLE(parisc, mux_tbl); -static struct parisc_driver builtin_serial_mux_driver = { +static struct parisc_driver builtin_serial_mux_driver __refdata = { .name = "builtin_serial_mux", .id_table = builtin_mux_tbl, .probe = mux_probe, - .remove = mux_remove, + .remove = __exit_p(mux_remove), }; -static struct parisc_driver serial_mux_driver = { +static struct parisc_driver serial_mux_driver __refdata = { .name = "serial_mux", .id_table = mux_tbl, .probe = mux_probe, - .remove = mux_remove, + .remove = __exit_p(mux_remove), }; /** diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c index 1ea05ac57aa7..7754053deeda 100644 --- a/drivers/tty/serial/omap-serial.c +++ b/drivers/tty/serial/omap-serial.c @@ -1235,21 +1235,20 @@ out: #ifdef CONFIG_SERIAL_OMAP_CONSOLE #ifdef CONFIG_SERIAL_EARLYCON -static unsigned int __init omap_serial_early_in(struct uart_port *port, - int offset) +static unsigned int omap_serial_early_in(struct uart_port *port, int offset) { offset <<= port->regshift; return readw(port->membase + offset); } -static void __init omap_serial_early_out(struct uart_port *port, int offset, - int value) +static void omap_serial_early_out(struct uart_port *port, int offset, + int value) { offset <<= port->regshift; writew(value, port->membase + offset); } -static void __init omap_serial_early_putc(struct uart_port *port, int c) +static void omap_serial_early_putc(struct uart_port *port, int c) { unsigned int status; @@ -1262,8 +1261,8 @@ static void __init omap_serial_early_putc(struct uart_port *port, int c) omap_serial_early_out(port, UART_TX, c); } -static void __init early_omap_serial_write(struct console *console, - const char *s, unsigned int count) +static void early_omap_serial_write(struct console *console, const char *s, + unsigned int count) { struct earlycon_device *device = console->data; struct uart_port *port = &device->port; diff --git a/drivers/tty/serial/owl-uart.c b/drivers/tty/serial/owl-uart.c index 1b8008797a1b..b9c859365334 100644 --- a/drivers/tty/serial/owl-uart.c +++ b/drivers/tty/serial/owl-uart.c @@ -20,6 +20,7 @@ * along with this program. If not, see <http://www.gnu.org/licenses/>. */ +#include <linux/clk.h> #include <linux/console.h> #include <linux/delay.h> #include <linux/io.h> @@ -28,22 +29,66 @@ #include <linux/platform_device.h> #include <linux/serial.h> #include <linux/serial_core.h> +#include <linux/tty.h> +#include <linux/tty_flip.h> + +#define OWL_UART_PORT_NUM 7 +#define OWL_UART_DEV_NAME "ttyOWL" #define OWL_UART_CTL 0x000 +#define OWL_UART_RXDAT 0x004 #define OWL_UART_TXDAT 0x008 #define OWL_UART_STAT 0x00c +#define OWL_UART_CTL_DWLS_MASK GENMASK(1, 0) +#define OWL_UART_CTL_DWLS_5BITS (0x0 << 0) +#define OWL_UART_CTL_DWLS_6BITS (0x1 << 0) +#define OWL_UART_CTL_DWLS_7BITS (0x2 << 0) +#define OWL_UART_CTL_DWLS_8BITS (0x3 << 0) +#define OWL_UART_CTL_STPS_2BITS BIT(2) +#define OWL_UART_CTL_PRS_MASK GENMASK(6, 4) +#define OWL_UART_CTL_PRS_NONE (0x0 << 4) +#define OWL_UART_CTL_PRS_ODD (0x4 << 4) +#define OWL_UART_CTL_PRS_MARK (0x5 << 4) +#define OWL_UART_CTL_PRS_EVEN (0x6 << 4) +#define OWL_UART_CTL_PRS_SPACE (0x7 << 4) +#define OWL_UART_CTL_AFE BIT(12) #define OWL_UART_CTL_TRFS_TX BIT(14) #define OWL_UART_CTL_EN BIT(15) +#define OWL_UART_CTL_RXDE BIT(16) +#define OWL_UART_CTL_TXDE BIT(17) #define OWL_UART_CTL_RXIE BIT(18) #define OWL_UART_CTL_TXIE BIT(19) +#define OWL_UART_CTL_LBEN BIT(20) #define OWL_UART_STAT_RIP BIT(0) #define OWL_UART_STAT_TIP BIT(1) +#define OWL_UART_STAT_RXER BIT(2) +#define OWL_UART_STAT_TFER BIT(3) +#define OWL_UART_STAT_RXST BIT(4) +#define OWL_UART_STAT_RFEM BIT(5) #define OWL_UART_STAT_TFFU BIT(6) -#define OWL_UART_STAT_TRFL_MASK (0x1f << 11) +#define OWL_UART_STAT_CTSS BIT(7) +#define OWL_UART_STAT_RTSS BIT(8) +#define OWL_UART_STAT_TFES BIT(10) +#define OWL_UART_STAT_TRFL_MASK GENMASK(16, 11) #define OWL_UART_STAT_UTBB BIT(17) +static struct uart_driver owl_uart_driver; + +struct owl_uart_info { + unsigned int tx_fifosize; +}; + +struct owl_uart_port { + struct uart_port port; + struct clk *clk; +}; + +#define to_owl_uart_port(prt) container_of(prt, struct owl_uart_port, prt) + +static struct owl_uart_port *owl_uart_ports[OWL_UART_PORT_NUM]; + static inline void owl_uart_write(struct uart_port *port, u32 val, unsigned int off) { writel(val, port->membase + off); @@ -54,6 +99,397 @@ static inline u32 owl_uart_read(struct uart_port *port, unsigned int off) return readl(port->membase + off); } +static void owl_uart_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + u32 ctl; + + ctl = owl_uart_read(port, OWL_UART_CTL); + + if (mctrl & TIOCM_LOOP) + ctl |= OWL_UART_CTL_LBEN; + else + ctl &= ~OWL_UART_CTL_LBEN; + + owl_uart_write(port, ctl, OWL_UART_CTL); +} + +static unsigned int owl_uart_get_mctrl(struct uart_port *port) +{ + unsigned int mctrl = TIOCM_CAR | TIOCM_DSR; + u32 stat, ctl; + + ctl = owl_uart_read(port, OWL_UART_CTL); + stat = owl_uart_read(port, OWL_UART_STAT); + if (stat & OWL_UART_STAT_RTSS) + mctrl |= TIOCM_RTS; + if ((stat & OWL_UART_STAT_CTSS) || !(ctl & OWL_UART_CTL_AFE)) + mctrl |= TIOCM_CTS; + return mctrl; +} + +static unsigned int owl_uart_tx_empty(struct uart_port *port) +{ + unsigned long flags; + u32 val; + unsigned int ret; + + spin_lock_irqsave(&port->lock, flags); + + val = owl_uart_read(port, OWL_UART_STAT); + ret = (val & OWL_UART_STAT_TFES) ? TIOCSER_TEMT : 0; + + spin_unlock_irqrestore(&port->lock, flags); + + return ret; +} + +static void owl_uart_stop_rx(struct uart_port *port) +{ + u32 val; + + val = owl_uart_read(port, OWL_UART_CTL); + val &= ~(OWL_UART_CTL_RXIE | OWL_UART_CTL_RXDE); + owl_uart_write(port, val, OWL_UART_CTL); + + val = owl_uart_read(port, OWL_UART_STAT); + val |= OWL_UART_STAT_RIP; + owl_uart_write(port, val, OWL_UART_STAT); +} + +static void owl_uart_stop_tx(struct uart_port *port) +{ + u32 val; + + val = owl_uart_read(port, OWL_UART_CTL); + val &= ~(OWL_UART_CTL_TXIE | OWL_UART_CTL_TXDE); + owl_uart_write(port, val, OWL_UART_CTL); + + val = owl_uart_read(port, OWL_UART_STAT); + val |= OWL_UART_STAT_TIP; + owl_uart_write(port, val, OWL_UART_STAT); +} + +static void owl_uart_start_tx(struct uart_port *port) +{ + u32 val; + + if (uart_tx_stopped(port)) { + owl_uart_stop_tx(port); + return; + } + + val = owl_uart_read(port, OWL_UART_STAT); + val |= OWL_UART_STAT_TIP; + owl_uart_write(port, val, OWL_UART_STAT); + + val = owl_uart_read(port, OWL_UART_CTL); + val |= OWL_UART_CTL_TXIE; + owl_uart_write(port, val, OWL_UART_CTL); +} + +static void owl_uart_send_chars(struct uart_port *port) +{ + struct circ_buf *xmit = &port->state->xmit; + unsigned int ch; + + if (uart_tx_stopped(port)) + return; + + if (port->x_char) { + while (!(owl_uart_read(port, OWL_UART_STAT) & OWL_UART_STAT_TFFU)) + cpu_relax(); + owl_uart_write(port, port->x_char, OWL_UART_TXDAT); + port->icount.tx++; + port->x_char = 0; + } + + while (!(owl_uart_read(port, OWL_UART_STAT) & OWL_UART_STAT_TFFU)) { + if (uart_circ_empty(xmit)) + break; + + ch = xmit->buf[xmit->tail]; + owl_uart_write(port, ch, OWL_UART_TXDAT); + xmit->tail = (xmit->tail + 1) & (SERIAL_XMIT_SIZE - 1); + port->icount.tx++; + } + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); + + if (uart_circ_empty(xmit)) + owl_uart_stop_tx(port); +} + +static void owl_uart_receive_chars(struct uart_port *port) +{ + u32 stat, val; + + val = owl_uart_read(port, OWL_UART_CTL); + val &= ~OWL_UART_CTL_TRFS_TX; + owl_uart_write(port, val, OWL_UART_CTL); + + stat = owl_uart_read(port, OWL_UART_STAT); + while (!(stat & OWL_UART_STAT_RFEM)) { + char flag = TTY_NORMAL; + + if (stat & OWL_UART_STAT_RXER) + port->icount.overrun++; + + if (stat & OWL_UART_STAT_RXST) { + /* We are not able to distinguish the error type. */ + port->icount.brk++; + port->icount.frame++; + + stat &= port->read_status_mask; + if (stat & OWL_UART_STAT_RXST) + flag = TTY_PARITY; + } else + port->icount.rx++; + + val = owl_uart_read(port, OWL_UART_RXDAT); + val &= 0xff; + + if ((stat & port->ignore_status_mask) == 0) + tty_insert_flip_char(&port->state->port, val, flag); + + stat = owl_uart_read(port, OWL_UART_STAT); + } + + spin_unlock(&port->lock); + tty_flip_buffer_push(&port->state->port); + spin_lock(&port->lock); +} + +static irqreturn_t owl_uart_irq(int irq, void *dev_id) +{ + struct uart_port *port = dev_id; + unsigned long flags; + u32 stat; + + spin_lock_irqsave(&port->lock, flags); + + stat = owl_uart_read(port, OWL_UART_STAT); + + if (stat & OWL_UART_STAT_RIP) + owl_uart_receive_chars(port); + + if (stat & OWL_UART_STAT_TIP) + owl_uart_send_chars(port); + + stat = owl_uart_read(port, OWL_UART_STAT); + stat |= OWL_UART_STAT_RIP | OWL_UART_STAT_TIP; + owl_uart_write(port, stat, OWL_UART_STAT); + + spin_unlock_irqrestore(&port->lock, flags); + + return IRQ_HANDLED; +} + +static void owl_uart_shutdown(struct uart_port *port) +{ + u32 val; + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + + val = owl_uart_read(port, OWL_UART_CTL); + val &= ~(OWL_UART_CTL_TXIE | OWL_UART_CTL_RXIE + | OWL_UART_CTL_TXDE | OWL_UART_CTL_RXDE | OWL_UART_CTL_EN); + owl_uart_write(port, val, OWL_UART_CTL); + + spin_unlock_irqrestore(&port->lock, flags); + + free_irq(port->irq, port); +} + +static int owl_uart_startup(struct uart_port *port) +{ + u32 val; + unsigned long flags; + int ret; + + ret = request_irq(port->irq, owl_uart_irq, IRQF_TRIGGER_HIGH, + "owl-uart", port); + if (ret) + return ret; + + spin_lock_irqsave(&port->lock, flags); + + val = owl_uart_read(port, OWL_UART_STAT); + val |= OWL_UART_STAT_RIP | OWL_UART_STAT_TIP + | OWL_UART_STAT_RXER | OWL_UART_STAT_TFER | OWL_UART_STAT_RXST; + owl_uart_write(port, val, OWL_UART_STAT); + + val = owl_uart_read(port, OWL_UART_CTL); + val |= OWL_UART_CTL_RXIE | OWL_UART_CTL_TXIE; + val |= OWL_UART_CTL_EN; + owl_uart_write(port, val, OWL_UART_CTL); + + spin_unlock_irqrestore(&port->lock, flags); + + return 0; +} + +static void owl_uart_change_baudrate(struct owl_uart_port *owl_port, + unsigned long baud) +{ + clk_set_rate(owl_port->clk, baud * 8); +} + +static void owl_uart_set_termios(struct uart_port *port, + struct ktermios *termios, + struct ktermios *old) +{ + struct owl_uart_port *owl_port = to_owl_uart_port(port); + unsigned int baud; + u32 ctl; + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + + ctl = owl_uart_read(port, OWL_UART_CTL); + + ctl &= ~OWL_UART_CTL_DWLS_MASK; + switch (termios->c_cflag & CSIZE) { + case CS5: + ctl |= OWL_UART_CTL_DWLS_5BITS; + break; + case CS6: + ctl |= OWL_UART_CTL_DWLS_6BITS; + break; + case CS7: + ctl |= OWL_UART_CTL_DWLS_7BITS; + break; + case CS8: + default: + ctl |= OWL_UART_CTL_DWLS_8BITS; + break; + } + + if (termios->c_cflag & CSTOPB) + ctl |= OWL_UART_CTL_STPS_2BITS; + else + ctl &= ~OWL_UART_CTL_STPS_2BITS; + + ctl &= ~OWL_UART_CTL_PRS_MASK; + if (termios->c_cflag & PARENB) { + if (termios->c_cflag & CMSPAR) { + if (termios->c_cflag & PARODD) + ctl |= OWL_UART_CTL_PRS_MARK; + else + ctl |= OWL_UART_CTL_PRS_SPACE; + } else if (termios->c_cflag & PARODD) + ctl |= OWL_UART_CTL_PRS_ODD; + else + ctl |= OWL_UART_CTL_PRS_EVEN; + } else + ctl |= OWL_UART_CTL_PRS_NONE; + + if (termios->c_cflag & CRTSCTS) + ctl |= OWL_UART_CTL_AFE; + else + ctl &= ~OWL_UART_CTL_AFE; + + owl_uart_write(port, ctl, OWL_UART_CTL); + + baud = uart_get_baud_rate(port, termios, old, 9600, 3200000); + owl_uart_change_baudrate(owl_port, baud); + + /* Don't rewrite B0 */ + if (tty_termios_baud_rate(termios)) + tty_termios_encode_baud_rate(termios, baud, baud); + + port->read_status_mask |= OWL_UART_STAT_RXER; + if (termios->c_iflag & INPCK) + port->read_status_mask |= OWL_UART_STAT_RXST; + + uart_update_timeout(port, termios->c_cflag, baud); + + spin_unlock_irqrestore(&port->lock, flags); +} + +static void owl_uart_release_port(struct uart_port *port) +{ + struct platform_device *pdev = to_platform_device(port->dev); + struct resource *res; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) + return; + + if (port->flags & UPF_IOREMAP) { + devm_release_mem_region(port->dev, port->mapbase, + resource_size(res)); + devm_iounmap(port->dev, port->membase); + port->membase = NULL; + } +} + +static int owl_uart_request_port(struct uart_port *port) +{ + struct platform_device *pdev = to_platform_device(port->dev); + struct resource *res; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) + return -ENXIO; + + if (!devm_request_mem_region(port->dev, port->mapbase, + resource_size(res), dev_name(port->dev))) + return -EBUSY; + + if (port->flags & UPF_IOREMAP) { + port->membase = devm_ioremap_nocache(port->dev, port->mapbase, + resource_size(res)); + if (!port->membase) + return -EBUSY; + } + + return 0; +} + +static const char *owl_uart_type(struct uart_port *port) +{ + return (port->type == PORT_OWL) ? "owl-uart" : NULL; +} + +static int owl_uart_verify_port(struct uart_port *port, + struct serial_struct *ser) +{ + if (port->type != PORT_OWL) + return -EINVAL; + + if (port->irq != ser->irq) + return -EINVAL; + + return 0; +} + +static void owl_uart_config_port(struct uart_port *port, int flags) +{ + if (flags & UART_CONFIG_TYPE) { + port->type = PORT_OWL; + owl_uart_request_port(port); + } +} + +static const struct uart_ops owl_uart_ops = { + .set_mctrl = owl_uart_set_mctrl, + .get_mctrl = owl_uart_get_mctrl, + .tx_empty = owl_uart_tx_empty, + .start_tx = owl_uart_start_tx, + .stop_rx = owl_uart_stop_rx, + .stop_tx = owl_uart_stop_tx, + .startup = owl_uart_startup, + .shutdown = owl_uart_shutdown, + .set_termios = owl_uart_set_termios, + .type = owl_uart_type, + .config_port = owl_uart_config_port, + .request_port = owl_uart_request_port, + .release_port = owl_uart_release_port, + .verify_port = owl_uart_verify_port, +}; + #ifdef CONFIG_SERIAL_OWL_CONSOLE static void owl_console_putchar(struct uart_port *port, int ch) @@ -110,6 +546,57 @@ static void owl_uart_port_write(struct uart_port *port, const char *s, local_irq_restore(flags); } +static void owl_uart_console_write(struct console *co, const char *s, + u_int count) +{ + struct owl_uart_port *owl_port; + + owl_port = owl_uart_ports[co->index]; + if (!owl_port) + return; + + owl_uart_port_write(&owl_port->port, s, count); +} + +static int owl_uart_console_setup(struct console *co, char *options) +{ + struct owl_uart_port *owl_port; + int baud = 115200; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + if (co->index < 0 || co->index >= OWL_UART_PORT_NUM) + return -EINVAL; + + owl_port = owl_uart_ports[co->index]; + if (!owl_port || !owl_port->port.membase) + return -ENODEV; + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + + return uart_set_options(&owl_port->port, co, baud, parity, bits, flow); +} + +static struct console owl_uart_console = { + .name = OWL_UART_DEV_NAME, + .write = owl_uart_console_write, + .device = uart_console_device, + .setup = owl_uart_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &owl_uart_driver, +}; + +static int __init owl_uart_console_init(void) +{ + register_console(&owl_uart_console); + + return 0; +} +console_initcall(owl_uart_console_init); + static void owl_uart_early_console_write(struct console *co, const char *s, u_int count) @@ -132,4 +619,148 @@ owl_uart_early_console_setup(struct earlycon_device *device, const char *opt) OF_EARLYCON_DECLARE(owl, "actions,owl-uart", owl_uart_early_console_setup); -#endif /* CONFIG_SERIAL_OWL_CONSOLE */ +#define OWL_UART_CONSOLE (&owl_uart_console) +#else +#define OWL_UART_CONSOLE NULL +#endif + +static struct uart_driver owl_uart_driver = { + .owner = THIS_MODULE, + .driver_name = "owl-uart", + .dev_name = OWL_UART_DEV_NAME, + .nr = OWL_UART_PORT_NUM, + .cons = OWL_UART_CONSOLE, +}; + +static const struct owl_uart_info owl_s500_info = { + .tx_fifosize = 16, +}; + +static const struct owl_uart_info owl_s900_info = { + .tx_fifosize = 32, +}; + +static const struct of_device_id owl_uart_dt_matches[] = { + { .compatible = "actions,s500-uart", .data = &owl_s500_info }, + { .compatible = "actions,s900-uart", .data = &owl_s900_info }, + { } +}; +MODULE_DEVICE_TABLE(of, owl_uart_dt_matches); + +static int owl_uart_probe(struct platform_device *pdev) +{ + const struct of_device_id *match; + const struct owl_uart_info *info = NULL; + struct resource *res_mem; + struct owl_uart_port *owl_port; + int ret, irq; + + if (pdev->dev.of_node) { + pdev->id = of_alias_get_id(pdev->dev.of_node, "serial"); + match = of_match_node(owl_uart_dt_matches, pdev->dev.of_node); + if (match) + info = match->data; + } + + if (pdev->id < 0 || pdev->id >= OWL_UART_PORT_NUM) { + dev_err(&pdev->dev, "id %d out of range\n", pdev->id); + return -EINVAL; + } + + res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res_mem) { + dev_err(&pdev->dev, "could not get mem\n"); + return -ENODEV; + } + + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + dev_err(&pdev->dev, "could not get irq\n"); + return irq; + } + + if (owl_uart_ports[pdev->id]) { + dev_err(&pdev->dev, "port %d already allocated\n", pdev->id); + return -EBUSY; + } + + owl_port = devm_kzalloc(&pdev->dev, sizeof(*owl_port), GFP_KERNEL); + if (!owl_port) + return -ENOMEM; + + owl_port->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(owl_port->clk)) { + dev_err(&pdev->dev, "could not get clk\n"); + return PTR_ERR(owl_port->clk); + } + + owl_port->port.dev = &pdev->dev; + owl_port->port.line = pdev->id; + owl_port->port.type = PORT_OWL; + owl_port->port.iotype = UPIO_MEM; + owl_port->port.mapbase = res_mem->start; + owl_port->port.irq = irq; + owl_port->port.uartclk = clk_get_rate(owl_port->clk); + if (owl_port->port.uartclk == 0) { + dev_err(&pdev->dev, "clock rate is zero\n"); + return -EINVAL; + } + owl_port->port.flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP | UPF_LOW_LATENCY; + owl_port->port.x_char = 0; + owl_port->port.fifosize = (info) ? info->tx_fifosize : 16; + owl_port->port.ops = &owl_uart_ops; + + owl_uart_ports[pdev->id] = owl_port; + platform_set_drvdata(pdev, owl_port); + + ret = uart_add_one_port(&owl_uart_driver, &owl_port->port); + if (ret) + owl_uart_ports[pdev->id] = NULL; + + return ret; +} + +static int owl_uart_remove(struct platform_device *pdev) +{ + struct owl_uart_port *owl_port = platform_get_drvdata(pdev); + + uart_remove_one_port(&owl_uart_driver, &owl_port->port); + owl_uart_ports[pdev->id] = NULL; + + return 0; +} + +static struct platform_driver owl_uart_platform_driver = { + .probe = owl_uart_probe, + .remove = owl_uart_remove, + .driver = { + .name = "owl-uart", + .of_match_table = owl_uart_dt_matches, + }, +}; + +static int __init owl_uart_init(void) +{ + int ret; + + ret = uart_register_driver(&owl_uart_driver); + if (ret) + return ret; + + ret = platform_driver_register(&owl_uart_platform_driver); + if (ret) + uart_unregister_driver(&owl_uart_driver); + + return ret; +} + +static void __init owl_uart_exit(void) +{ + platform_driver_unregister(&owl_uart_platform_driver); + uart_unregister_driver(&owl_uart_driver); +} + +module_init(owl_uart_init); +module_exit(owl_uart_exit); + +MODULE_LICENSE("GPL"); diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c index d3796dc26fa9..ae8cfc81ffc5 100644 --- a/drivers/tty/serial/pch_uart.c +++ b/drivers/tty/serial/pch_uart.c @@ -46,11 +46,6 @@ enum { PCH_UART_HANDLED_LS_INT_SHIFT, }; -enum { - PCH_UART_8LINE, - PCH_UART_2LINE, -}; - #define PCH_UART_DRIVER_DEVICE "ttyPCH" /* Set the max number of UART port @@ -267,7 +262,7 @@ struct eg20t_port { /** * struct pch_uart_driver_data - private data structure for UART-DMA - * @port_type: The number of DMA channel + * @port_type: The type of UART port * @line_no: UART port line number (0, 1, 2...) */ struct pch_uart_driver_data { @@ -290,17 +285,17 @@ enum pch_uart_num_t { }; static struct pch_uart_driver_data drv_dat[] = { - [pch_et20t_uart0] = {PCH_UART_8LINE, 0}, - [pch_et20t_uart1] = {PCH_UART_2LINE, 1}, - [pch_et20t_uart2] = {PCH_UART_2LINE, 2}, - [pch_et20t_uart3] = {PCH_UART_2LINE, 3}, - [pch_ml7213_uart0] = {PCH_UART_8LINE, 0}, - [pch_ml7213_uart1] = {PCH_UART_2LINE, 1}, - [pch_ml7213_uart2] = {PCH_UART_2LINE, 2}, - [pch_ml7223_uart0] = {PCH_UART_8LINE, 0}, - [pch_ml7223_uart1] = {PCH_UART_2LINE, 1}, - [pch_ml7831_uart0] = {PCH_UART_8LINE, 0}, - [pch_ml7831_uart1] = {PCH_UART_2LINE, 1}, + [pch_et20t_uart0] = {PORT_PCH_8LINE, 0}, + [pch_et20t_uart1] = {PORT_PCH_2LINE, 1}, + [pch_et20t_uart2] = {PORT_PCH_2LINE, 2}, + [pch_et20t_uart3] = {PORT_PCH_2LINE, 3}, + [pch_ml7213_uart0] = {PORT_PCH_8LINE, 0}, + [pch_ml7213_uart1] = {PORT_PCH_2LINE, 1}, + [pch_ml7213_uart2] = {PORT_PCH_2LINE, 2}, + [pch_ml7223_uart0] = {PORT_PCH_8LINE, 0}, + [pch_ml7223_uart1] = {PORT_PCH_2LINE, 1}, + [pch_ml7831_uart0] = {PORT_PCH_8LINE, 0}, + [pch_ml7831_uart1] = {PORT_PCH_2LINE, 1}, }; #ifdef CONFIG_SERIAL_PCH_UART_CONSOLE @@ -1777,10 +1772,10 @@ static struct eg20t_port *pch_uart_init_port(struct pci_dev *pdev, goto init_port_free_txbuf; switch (port_type) { - case PORT_UNKNOWN: + case PORT_PCH_8LINE: fifosize = 256; /* EG20T/ML7213: UART0 */ break; - case PORT_8250: + case PORT_PCH_2LINE: fifosize = 64; /* EG20T:UART1~3 ML7213: UART1~2*/ break; default: @@ -1804,7 +1799,7 @@ static struct eg20t_port *pch_uart_init_port(struct pci_dev *pdev, priv->fifo_size = fifosize; priv->uartclk = pch_uart_get_uartclk(); - priv->port_type = PORT_MAX_8250 + port_type + 1; + priv->port_type = port_type; priv->port.dev = &pdev->dev; priv->port.iobase = iobase; priv->port.membase = NULL; @@ -1862,8 +1857,7 @@ static void pch_uart_exit_port(struct eg20t_port *priv) { #ifdef CONFIG_DEBUG_FS - if (priv->debugfs) - debugfs_remove(priv->debugfs); + debugfs_remove(priv->debugfs); #endif uart_remove_one_port(&pch_uart_driver, &priv->port); free_page((unsigned long)priv->rxbuf.buf); diff --git a/drivers/tty/serial/pmac_zilog.c b/drivers/tty/serial/pmac_zilog.c index 0da52947e59e..6ccdd018fb45 100644 --- a/drivers/tty/serial/pmac_zilog.c +++ b/drivers/tty/serial/pmac_zilog.c @@ -1671,8 +1671,8 @@ static int __init pmz_probe(void) if (!node_a && !node_b) { of_node_put(node_a); of_node_put(node_b); - printk(KERN_ERR "pmac_zilog: missing node %c for escc %s\n", - (!node_a) ? 'a' : 'b', node_p->full_name); + printk(KERN_ERR "pmac_zilog: missing node %c for escc %pOF\n", + (!node_a) ? 'a' : 'b', node_p); continue; } diff --git a/drivers/tty/serial/serial-tegra.c b/drivers/tty/serial/serial-tegra.c index d92a150c8733..cf9b736f26f8 100644 --- a/drivers/tty/serial/serial-tegra.c +++ b/drivers/tty/serial/serial-tegra.c @@ -1310,7 +1310,7 @@ static int tegra_uart_probe(struct platform_device *pdev) return PTR_ERR(tup->uart_clk); } - tup->rst = devm_reset_control_get(&pdev->dev, "serial"); + tup->rst = devm_reset_control_get_exclusive(&pdev->dev, "serial"); if (IS_ERR(tup->rst)) { dev_err(&pdev->dev, "Couldn't get the reset\n"); return PTR_ERR(tup->rst); diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c index f534a40aebde..3a14cccbd7ff 100644 --- a/drivers/tty/serial/serial_core.c +++ b/drivers/tty/serial/serial_core.c @@ -36,7 +36,7 @@ #include <linux/delay.h> #include <linux/mutex.h> -#include <asm/irq.h> +#include <linux/irq.h> #include <linux/uaccess.h> /* @@ -165,6 +165,27 @@ uart_update_mctrl(struct uart_port *port, unsigned int set, unsigned int clear) #define uart_set_mctrl(port, set) uart_update_mctrl(port, set, 0) #define uart_clear_mctrl(port, clear) uart_update_mctrl(port, 0, clear) +static void uart_port_dtr_rts(struct uart_port *uport, int raise) +{ + int rs485_on = uport->rs485_config && + (uport->rs485.flags & SER_RS485_ENABLED); + int RTS_after_send = !!(uport->rs485.flags & SER_RS485_RTS_AFTER_SEND); + + if (raise) { + if (rs485_on && !RTS_after_send) { + uart_set_mctrl(uport, TIOCM_DTR); + uart_clear_mctrl(uport, TIOCM_RTS); + } else { + uart_set_mctrl(uport, TIOCM_DTR | TIOCM_RTS); + } + } else { + unsigned int clear = TIOCM_DTR; + + clear |= (!rs485_on || !RTS_after_send) ? TIOCM_RTS : 0; + uart_clear_mctrl(uport, clear); + } +} + /* * Startup the port. This will be called once per open. All calls * will be serialised by the per-port mutex. @@ -214,7 +235,7 @@ static int uart_port_startup(struct tty_struct *tty, struct uart_state *state, * port is open and ready to respond. */ if (init_hw && C_BAUD(tty)) - uart_set_mctrl(uport, TIOCM_RTS | TIOCM_DTR); + uart_port_dtr_rts(uport, 1); } /* @@ -272,7 +293,7 @@ static void uart_shutdown(struct tty_struct *tty, struct uart_state *state) uport->cons->cflag = tty->termios.c_cflag; if (!tty || C_HUPCL(tty)) - uart_clear_mctrl(uport, TIOCM_DTR | TIOCM_RTS); + uart_port_dtr_rts(uport, 0); uart_port_shutdown(port); } @@ -744,7 +765,7 @@ static int uart_get_info(struct tty_port *port, struct serial_struct *retinfo) if (HIGH_BITS_OFFSET) retinfo->port_high = (long) uport->iobase >> HIGH_BITS_OFFSET; retinfo->irq = uport->irq; - retinfo->flags = uport->flags; + retinfo->flags = (__force int)uport->flags; retinfo->xmit_fifo_size = uport->fifosize; retinfo->baud_base = uport->uartclk / 16; retinfo->close_delay = jiffies_to_msecs(port->close_delay) / 10; @@ -818,7 +839,7 @@ static int uart_set_info(struct tty_struct *tty, struct tty_port *port, new_info->type != uport->type); old_flags = uport->flags; - new_flags = new_info->flags; + new_flags = (__force upf_t)new_info->flags; old_custom_divisor = uport->custom_divisor; if (!capable(CAP_SYS_ADMIN)) { @@ -1658,7 +1679,7 @@ static int uart_carrier_raised(struct tty_port *port) return 0; } -static void uart_dtr_rts(struct tty_port *port, int onoff) +static void uart_dtr_rts(struct tty_port *port, int raise) { struct uart_state *state = container_of(port, struct uart_state, port); struct uart_port *uport; @@ -1666,12 +1687,7 @@ static void uart_dtr_rts(struct tty_port *port, int onoff) uport = uart_port_ref(state); if (!uport) return; - - if (onoff) - uart_set_mctrl(uport, TIOCM_DTR | TIOCM_RTS); - else - uart_clear_mctrl(uport, TIOCM_DTR | TIOCM_RTS); - + uart_port_dtr_rts(uport, raise); uart_port_deref(uport); } @@ -2083,8 +2099,7 @@ int uart_suspend_port(struct uart_driver *drv, struct uart_port *uport) tty_dev = device_find_child(uport->dev, &match, serial_match_port); if (tty_dev && device_may_wakeup(tty_dev)) { - if (!enable_irq_wake(uport->irq)) - uport->irq_wake = 1; + enable_irq_wake(uport->irq); put_device(tty_dev); mutex_unlock(&port->mutex); return 0; @@ -2147,10 +2162,8 @@ int uart_resume_port(struct uart_driver *drv, struct uart_port *uport) tty_dev = device_find_child(uport->dev, &match, serial_match_port); if (!uport->suspended && device_may_wakeup(tty_dev)) { - if (uport->irq_wake) { + if (irqd_is_wakeup_set(irq_get_irq_data((uport->irq)))) disable_irq_wake(uport->irq); - uport->irq_wake = 0; - } put_device(tty_dev); mutex_unlock(&port->mutex); return 0; diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c index e08b16b070c0..784dd42002ea 100644 --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -3073,8 +3073,7 @@ static struct plat_sci_port *sci_parse_dt(struct platform_device *pdev, p->type = SCI_OF_TYPE(match->data); p->regtype = SCI_OF_REGTYPE(match->data); - if (of_find_property(np, "uart-has-rtscts", NULL)) - sp->has_rtscts = true; + sp->has_rtscts = of_property_read_bool(np, "uart-has-rtscts"); return p; } diff --git a/drivers/tty/serial/sprd_serial.c b/drivers/tty/serial/sprd_serial.c index 90996ad97b37..e902494ebbd5 100644 --- a/drivers/tty/serial/sprd_serial.c +++ b/drivers/tty/serial/sprd_serial.c @@ -63,6 +63,7 @@ /* interrupt clear register */ #define SPRD_ICLR 0x0014 +#define SPRD_ICLR_TIMEOUT BIT(13) /* line control register */ #define SPRD_LCR 0x0018 @@ -298,7 +299,8 @@ static irqreturn_t sprd_handle_irq(int irq, void *dev_id) return IRQ_NONE; } - serial_out(port, SPRD_ICLR, ~0); + if (ims & SPRD_IMSR_TIMEOUT) + serial_out(port, SPRD_ICLR, SPRD_ICLR_TIMEOUT); if (ims & (SPRD_IMSR_RX_FIFO_FULL | SPRD_IMSR_BREAK_DETECT | SPRD_IMSR_TIMEOUT)) @@ -729,8 +731,8 @@ static int sprd_probe(struct platform_device *pdev) irq = platform_get_irq(pdev, 0); if (irq < 0) { - dev_err(&pdev->dev, "not provide irq resource\n"); - return -ENODEV; + dev_err(&pdev->dev, "not provide irq resource: %d\n", irq); + return irq; } up->irq = irq; diff --git a/drivers/tty/serial/st-asc.c b/drivers/tty/serial/st-asc.c index 6b0ca65027d0..b313a792b149 100644 --- a/drivers/tty/serial/st-asc.c +++ b/drivers/tty/serial/st-asc.c @@ -310,7 +310,7 @@ static void asc_receive_chars(struct uart_port *port) if (mode == ASC_CTL_MODE_8BIT || mode == ASC_CTL_MODE_8BIT_PAR) ignore_pe = true; - if (port->irq_wake) + if (irqd_is_wakeup_set(irq_get_irq_data(port->irq))) pm_wakeup_event(tport->tty->dev, 0); while ((status = asc_in(port, ASC_STA)) & ASC_STA_RBF) { diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c index 033856287ca2..03a583264d9e 100644 --- a/drivers/tty/serial/stm32-usart.c +++ b/drivers/tty/serial/stm32-usart.c @@ -1,5 +1,6 @@ /* * Copyright (C) Maxime Coquelin 2015 + * Copyright (C) STMicroelectronics SA 2017 * Authors: Maxime Coquelin <mcoquelin.stm32@gmail.com> * Gerald Baeza <gerald.baeza@st.com> * License terms: GNU General Public License (GPL), version 2 @@ -25,6 +26,7 @@ #include <linux/of_platform.h> #include <linux/platform_device.h> #include <linux/pm_runtime.h> +#include <linux/pm_wakeirq.h> #include <linux/serial_core.h> #include <linux/serial.h> #include <linux/spinlock.h> @@ -110,14 +112,13 @@ static void stm32_receive_chars(struct uart_port *port, bool threaded) unsigned long c; u32 sr; char flag; - static int last_res = RX_BUF_L; - if (port->irq_wake) + if (irqd_is_wakeup_set(irq_get_irq_data(port->irq))) pm_wakeup_event(tport->tty->dev, 0); - while (stm32_pending_rx(port, &sr, &last_res, threaded)) { + while (stm32_pending_rx(port, &sr, &stm32_port->last_res, threaded)) { sr |= USART_SR_DUMMY_RX; - c = stm32_get_char(port, &sr, &last_res); + c = stm32_get_char(port, &sr, &stm32_port->last_res); flag = TTY_NORMAL; port->icount.rx++; @@ -202,7 +203,7 @@ static void stm32_transmit_chars_pio(struct uart_port *port) ret = readl_relaxed_poll_timeout_atomic(port->membase + ofs->isr, isr, (isr & USART_SR_TXE), - 10, 100); + 10, 100000); if (ret) dev_err(port->dev, "tx empty not set\n"); @@ -326,6 +327,10 @@ static irqreturn_t stm32_interrupt(int irq, void *ptr) sr = readl_relaxed(port->membase + ofs->isr); + if ((sr & USART_SR_WUF) && (ofs->icr != UNDEF_REG)) + writel_relaxed(USART_ICR_WUCF, + port->membase + ofs->icr); + if ((sr & USART_SR_RXNE) && !(stm32_port->rx_ch)) stm32_receive_chars(port, false); @@ -442,6 +447,7 @@ static int stm32_startup(struct uart_port *port) { struct stm32_port *stm32_port = to_stm32_port(port); struct stm32_usart_offsets *ofs = &stm32_port->info->ofs; + struct stm32_usart_config *cfg = &stm32_port->info->cfg; const char *name = to_platform_device(port->dev)->name; u32 val; int ret; @@ -452,7 +458,18 @@ static int stm32_startup(struct uart_port *port) if (ret) return ret; + if (cfg->has_wakeup && stm32_port->wakeirq >= 0) { + ret = dev_pm_set_dedicated_wake_irq(port->dev, + stm32_port->wakeirq); + if (ret) { + free_irq(port->irq, port); + return ret; + } + } + val = USART_CR1_RXNEIE | USART_CR1_TE | USART_CR1_RE; + if (stm32_port->fifoen) + val |= USART_CR1_FIFOEN; stm32_set_bits(port, ofs->cr1, val); return 0; @@ -467,8 +484,11 @@ static void stm32_shutdown(struct uart_port *port) val = USART_CR1_TXEIE | USART_CR1_RXNEIE | USART_CR1_TE | USART_CR1_RE; val |= BIT(cfg->uart_enable_bit); + if (stm32_port->fifoen) + val |= USART_CR1_FIFOEN; stm32_clr_bits(port, ofs->cr1, val); + dev_pm_clear_wake_irq(port->dev); free_irq(port->irq, port); } @@ -496,6 +516,8 @@ static void stm32_set_termios(struct uart_port *port, struct ktermios *termios, cr1 = USART_CR1_TE | USART_CR1_RE | USART_CR1_RXNEIE; cr1 |= BIT(cfg->uart_enable_bit); + if (stm32_port->fifoen) + cr1 |= USART_CR1_FIFOEN; cr2 = 0; cr3 = 0; @@ -518,7 +540,7 @@ static void stm32_set_termios(struct uart_port *port, struct ktermios *termios, port->status &= ~(UPSTAT_AUTOCTS | UPSTAT_AUTORTS); if (cflag & CRTSCTS) { port->status |= UPSTAT_AUTOCTS | UPSTAT_AUTORTS; - cr3 |= USART_CR3_CTSE; + cr3 |= USART_CR3_CTSE | USART_CR3_RTSE; } usartdiv = DIV_ROUND_CLOSEST(port->uartclk, baud); @@ -659,6 +681,8 @@ static int stm32_init_port(struct stm32_port *stm32port, port->ops = &stm32_uart_ops; port->dev = &pdev->dev; port->irq = platform_get_irq(pdev, 0); + stm32port->wakeirq = platform_get_irq(pdev, 1); + stm32port->fifoen = stm32port->info->cfg.has_fifo; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); port->membase = devm_ioremap_resource(&pdev->dev, res); @@ -678,8 +702,10 @@ static int stm32_init_port(struct stm32_port *stm32port, return ret; stm32port->port.uartclk = clk_get_rate(stm32port->clk); - if (!stm32port->port.uartclk) + if (!stm32port->port.uartclk) { + clk_disable_unprepare(stm32port->clk); ret = -EINVAL; + } return ret; } @@ -693,8 +719,10 @@ static struct stm32_port *stm32_of_get_stm32_port(struct platform_device *pdev) return NULL; id = of_alias_get_id(np, "serial"); - if (id < 0) - id = 0; + if (id < 0) { + dev_err(&pdev->dev, "failed to get alias id, errno %d\n", id); + return NULL; + } if (WARN_ON(id >= STM32_MAX_PORTS)) return NULL; @@ -702,6 +730,7 @@ static struct stm32_port *stm32_of_get_stm32_port(struct platform_device *pdev) stm32_ports[id].hw_flow_control = of_property_read_bool(np, "st,hw-flow-ctrl"); stm32_ports[id].port.line = id; + stm32_ports[id].last_res = RX_BUF_L; return &stm32_ports[id]; } @@ -711,6 +740,8 @@ static const struct of_device_id stm32_match[] = { { .compatible = "st,stm32-uart", .data = &stm32f4_info}, { .compatible = "st,stm32f7-usart", .data = &stm32f7_info}, { .compatible = "st,stm32f7-uart", .data = &stm32f7_info}, + { .compatible = "st,stm32h7-usart", .data = &stm32h7_info}, + { .compatible = "st,stm32h7-uart", .data = &stm32h7_info}, {}, }; @@ -860,9 +891,15 @@ static int stm32_serial_probe(struct platform_device *pdev) if (ret) return ret; + if (stm32port->info->cfg.has_wakeup && stm32port->wakeirq >= 0) { + ret = device_init_wakeup(&pdev->dev, true); + if (ret) + goto err_uninit; + } + ret = uart_add_one_port(&stm32_usart_driver, &stm32port->port); if (ret) - return ret; + goto err_nowup; ret = stm32_of_dma_rx_probe(stm32port, pdev); if (ret) @@ -875,6 +912,15 @@ static int stm32_serial_probe(struct platform_device *pdev) platform_set_drvdata(pdev, &stm32port->port); return 0; + +err_nowup: + if (stm32port->info->cfg.has_wakeup && stm32port->wakeirq >= 0) + device_init_wakeup(&pdev->dev, false); + +err_uninit: + clk_disable_unprepare(stm32port->clk); + + return ret; } static int stm32_serial_remove(struct platform_device *pdev) @@ -882,6 +928,7 @@ static int stm32_serial_remove(struct platform_device *pdev) struct uart_port *port = platform_get_drvdata(pdev); struct stm32_port *stm32_port = to_stm32_port(port); struct stm32_usart_offsets *ofs = &stm32_port->info->ofs; + struct stm32_usart_config *cfg = &stm32_port->info->cfg; stm32_clr_bits(port, ofs->cr3, USART_CR3_DMAR); @@ -903,6 +950,9 @@ static int stm32_serial_remove(struct platform_device *pdev) TX_BUF_L, stm32_port->tx_buf, stm32_port->tx_dma_buf); + if (cfg->has_wakeup && stm32_port->wakeirq >= 0) + device_init_wakeup(&pdev->dev, false); + clk_disable_unprepare(stm32_port->clk); return uart_remove_one_port(&stm32_usart_driver, port); @@ -1008,11 +1058,66 @@ static struct uart_driver stm32_usart_driver = { .cons = STM32_SERIAL_CONSOLE, }; +#ifdef CONFIG_PM_SLEEP +static void stm32_serial_enable_wakeup(struct uart_port *port, bool enable) +{ + struct stm32_port *stm32_port = to_stm32_port(port); + struct stm32_usart_offsets *ofs = &stm32_port->info->ofs; + struct stm32_usart_config *cfg = &stm32_port->info->cfg; + u32 val; + + if (!cfg->has_wakeup || stm32_port->wakeirq < 0) + return; + + if (enable) { + stm32_clr_bits(port, ofs->cr1, BIT(cfg->uart_enable_bit)); + stm32_set_bits(port, ofs->cr1, USART_CR1_UESM); + val = readl_relaxed(port->membase + ofs->cr3); + val &= ~USART_CR3_WUS_MASK; + /* Enable Wake up interrupt from low power on start bit */ + val |= USART_CR3_WUS_START_BIT | USART_CR3_WUFIE; + writel_relaxed(val, port->membase + ofs->cr3); + stm32_set_bits(port, ofs->cr1, BIT(cfg->uart_enable_bit)); + } else { + stm32_clr_bits(port, ofs->cr1, USART_CR1_UESM); + } +} + +static int stm32_serial_suspend(struct device *dev) +{ + struct uart_port *port = dev_get_drvdata(dev); + + uart_suspend_port(&stm32_usart_driver, port); + + if (device_may_wakeup(dev)) + stm32_serial_enable_wakeup(port, true); + else + stm32_serial_enable_wakeup(port, false); + + return 0; +} + +static int stm32_serial_resume(struct device *dev) +{ + struct uart_port *port = dev_get_drvdata(dev); + + if (device_may_wakeup(dev)) + stm32_serial_enable_wakeup(port, false); + + return uart_resume_port(&stm32_usart_driver, port); +} +#endif /* CONFIG_PM_SLEEP */ + +static const struct dev_pm_ops stm32_serial_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(stm32_serial_suspend, stm32_serial_resume) +}; + static struct platform_driver stm32_serial_driver = { .probe = stm32_serial_probe, .remove = stm32_serial_remove, .driver = { .name = DRIVER_NAME, + .pm = &stm32_serial_pm_ops, .of_match_table = of_match_ptr(stm32_match), }, }; diff --git a/drivers/tty/serial/stm32-usart.h b/drivers/tty/serial/stm32-usart.h index cd97ceb76e4f..ffc0c5285e51 100644 --- a/drivers/tty/serial/stm32-usart.h +++ b/drivers/tty/serial/stm32-usart.h @@ -1,5 +1,6 @@ /* * Copyright (C) Maxime Coquelin 2015 + * Copyright (C) STMicroelectronics SA 2017 * Authors: Maxime Coquelin <mcoquelin.stm32@gmail.com> * Gerald Baeza <gerald_baeza@yahoo.fr> * License terms: GNU General Public License (GPL), version 2 @@ -24,6 +25,8 @@ struct stm32_usart_offsets { struct stm32_usart_config { u8 uart_enable_bit; /* USART_CR1_UE */ bool has_7bits_data; + bool has_wakeup; + bool has_fifo; }; struct stm32_usart_info { @@ -74,6 +77,28 @@ struct stm32_usart_info stm32f7_info = { } }; +struct stm32_usart_info stm32h7_info = { + .ofs = { + .cr1 = 0x00, + .cr2 = 0x04, + .cr3 = 0x08, + .brr = 0x0c, + .gtpr = 0x10, + .rtor = 0x14, + .rqr = 0x18, + .isr = 0x1c, + .icr = 0x20, + .rdr = 0x24, + .tdr = 0x28, + }, + .cfg = { + .uart_enable_bit = 0, + .has_7bits_data = true, + .has_wakeup = true, + .has_fifo = true, + } +}; + /* USART_SR (F4) / USART_ISR (F7) */ #define USART_SR_PE BIT(0) #define USART_SR_FE BIT(1) @@ -93,6 +118,7 @@ struct stm32_usart_info stm32f7_info = { #define USART_SR_BUSY BIT(16) /* F7 */ #define USART_SR_CMF BIT(17) /* F7 */ #define USART_SR_SBKF BIT(18) /* F7 */ +#define USART_SR_WUF BIT(20) /* H7 */ #define USART_SR_TEACK BIT(21) /* F7 */ #define USART_SR_ERR_MASK (USART_SR_LBD | USART_SR_ORE | \ USART_SR_FE | USART_SR_PE) @@ -113,6 +139,7 @@ struct stm32_usart_info stm32f7_info = { /* USART_CR1 */ #define USART_CR1_SBK BIT(0) #define USART_CR1_RWU BIT(1) /* F4 */ +#define USART_CR1_UESM BIT(1) /* H7 */ #define USART_CR1_RE BIT(2) #define USART_CR1_TE BIT(3) #define USART_CR1_IDLEIE BIT(4) @@ -134,6 +161,7 @@ struct stm32_usart_info stm32f7_info = { #define USART_CR1_EOBIE BIT(27) /* F7 */ #define USART_CR1_M1 BIT(28) /* F7 */ #define USART_CR1_IE_MASK (GENMASK(8, 4) | BIT(14) | BIT(26) | BIT(27)) +#define USART_CR1_FIFOEN BIT(29) /* H7 */ /* USART_CR2 */ #define USART_CR2_ADD_MASK GENMASK(3, 0) /* F4 */ @@ -175,6 +203,9 @@ struct stm32_usart_info stm32f7_info = { #define USART_CR3_DEM BIT(14) /* F7 */ #define USART_CR3_DEP BIT(15) /* F7 */ #define USART_CR3_SCARCNT_MASK GENMASK(19, 17) /* F7 */ +#define USART_CR3_WUS_MASK GENMASK(21, 20) /* H7 */ +#define USART_CR3_WUS_START_BIT BIT(21) /* H7 */ +#define USART_CR3_WUFIE BIT(22) /* H7 */ /* USART_GTPR */ #define USART_GTPR_PSC_MASK GENMASK(7, 0) @@ -203,9 +234,10 @@ struct stm32_usart_info stm32f7_info = { #define USART_ICR_RTOCF BIT(11) /* F7 */ #define USART_ICR_EOBCF BIT(12) /* F7 */ #define USART_ICR_CMCF BIT(17) /* F7 */ +#define USART_ICR_WUCF BIT(20) /* H7 */ #define STM32_SERIAL_NAME "ttyS" -#define STM32_MAX_PORTS 6 +#define STM32_MAX_PORTS 8 #define RX_BUF_L 200 /* dma rx buffer length */ #define RX_BUF_P RX_BUF_L /* dma rx buffer period */ @@ -221,8 +253,11 @@ struct stm32_port { struct dma_chan *tx_ch; /* dma tx channel */ dma_addr_t tx_dma_buf; /* dma tx buffer bus address */ unsigned char *tx_buf; /* dma tx buffer cpu address */ + int last_res; bool tx_dma_busy; /* dma tx busy */ bool hw_flow_control; + bool fifoen; + int wakeirq; }; static struct stm32_port stm32_ports[STM32_MAX_PORTS]; diff --git a/drivers/tty/serial/sunsab.c b/drivers/tty/serial/sunsab.c index b5e3195b3697..653a076d89d3 100644 --- a/drivers/tty/serial/sunsab.c +++ b/drivers/tty/serial/sunsab.c @@ -819,7 +819,7 @@ static int sunsab_verify_port(struct uart_port *port, struct serial_struct *ser) return -EINVAL; } -static struct uart_ops sunsab_pops = { +static const struct uart_ops sunsab_pops = { .tx_empty = sunsab_tx_empty, .set_mctrl = sunsab_set_mctrl, .get_mctrl = sunsab_get_mctrl, diff --git a/drivers/tty/serial/sunsu.c b/drivers/tty/serial/sunsu.c index 72df2e1b88af..95d34d7565c9 100644 --- a/drivers/tty/serial/sunsu.c +++ b/drivers/tty/serial/sunsu.c @@ -958,7 +958,7 @@ sunsu_type(struct uart_port *port) return uart_config[type].name; } -static struct uart_ops sunsu_pops = { +static const struct uart_ops sunsu_pops = { .tx_empty = sunsu_tx_empty, .set_mctrl = sunsu_set_mctrl, .get_mctrl = sunsu_get_mctrl, @@ -1212,8 +1212,8 @@ static int sunsu_kbd_ms_init(struct uart_sunsu_port *up) if (up->port.type == PORT_UNKNOWN) return -ENODEV; - printk("%s: %s port at %llx, irq %u\n", - up->port.dev->of_node->full_name, + printk("%pOF: %s port at %llx, irq %u\n", + up->port.dev->of_node, (up->su_type == SU_PORT_KBD) ? "Keyboard" : "Mouse", (unsigned long long) up->port.mapbase, up->port.irq); diff --git a/drivers/tty/serial/ucc_uart.c b/drivers/tty/serial/ucc_uart.c index 481eb2989a1e..55b702775786 100644 --- a/drivers/tty/serial/ucc_uart.c +++ b/drivers/tty/serial/ucc_uart.c @@ -1085,7 +1085,7 @@ static int qe_uart_verify_port(struct uart_port *port, * * Details on these functions can be found in Documentation/serial/driver */ -static struct uart_ops qe_uart_pops = { +static const struct uart_ops qe_uart_pops = { .tx_empty = qe_uart_tx_empty, .set_mctrl = qe_uart_set_mctrl, .get_mctrl = qe_uart_get_mctrl, diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c index fde55dcdea5a..31a630ae0870 100644 --- a/drivers/tty/serial/xilinx_uartps.c +++ b/drivers/tty/serial/xilinx_uartps.c @@ -1163,7 +1163,7 @@ static void cdns_uart_console_putchar(struct uart_port *port, int ch) writel(ch, port->membase + CDNS_UART_FIFO); } -static void __init cdns_early_write(struct console *con, const char *s, +static void cdns_early_write(struct console *con, const char *s, unsigned n) { struct earlycon_device *dev = con->data; |