diff options
Diffstat (limited to 'drivers/tty/serial/sirfsoc_uart.c')
| -rw-r--r-- | drivers/tty/serial/sirfsoc_uart.c | 37 |
1 files changed, 22 insertions, 15 deletions
diff --git a/drivers/tty/serial/sirfsoc_uart.c b/drivers/tty/serial/sirfsoc_uart.c index 96304cdc4745..aaa3ce22b5b8 100644 --- a/drivers/tty/serial/sirfsoc_uart.c +++ b/drivers/tty/serial/sirfsoc_uart.c @@ -951,11 +951,11 @@ static void sirfsoc_uart_set_termios(struct uart_port *port, set_baud = ((ioclk_rate / (clk_div_reg+1) - 1) / (sample_div_reg + 1)); /* setting usp mode 2 */ - len_val = ((1 << 0) | (1 << 8)); - len_val |= ((clk_div_reg & 0x3ff) << 21); - wr_regl(port, ureg->sirfsoc_mode2, - len_val); - + len_val = ((1 << SIRFSOC_USP_MODE2_RXD_DELAY_OFFSET) | + (1 << SIRFSOC_USP_MODE2_TXD_DELAY_OFFSET)); + len_val |= ((clk_div_reg & SIRFSOC_USP_MODE2_CLK_DIVISOR_MASK) + << SIRFSOC_USP_MODE2_CLK_DIVISOR_OFFSET); + wr_regl(port, ureg->sirfsoc_mode2, len_val); } if (tty_termios_baud_rate(termios)) tty_termios_encode_baud_rate(termios, set_baud, set_baud); @@ -963,7 +963,7 @@ static void sirfsoc_uart_set_termios(struct uart_port *port, rx_time_out = SIRFSOC_UART_RX_TIMEOUT(set_baud, 20000); rx_time_out = SIRFUART_RECV_TIMEOUT_VALUE(rx_time_out); txfifo_op_reg = rd_regl(port, ureg->sirfsoc_tx_fifo_op); - wr_regl(port, ureg->sirfsoc_rx_fifo_op, 0); + wr_regl(port, ureg->sirfsoc_rx_fifo_op, SIRFUART_FIFO_STOP); wr_regl(port, ureg->sirfsoc_tx_fifo_op, (txfifo_op_reg & ~SIRFUART_FIFO_START)); if (sirfport->uart_reg->uart_type == SIRF_REAL_UART) { @@ -971,21 +971,28 @@ static void sirfsoc_uart_set_termios(struct uart_port *port, wr_regl(port, ureg->sirfsoc_line_ctrl, config_reg); } else { /*tx frame ctrl*/ - len_val = (data_bit_len - 1) << 0; - len_val |= (data_bit_len + 1 + stop_bit_len - 1) << 16; - len_val |= ((data_bit_len - 1) << 24); - len_val |= (((clk_div_reg & 0xc00) >> 10) << 30); + len_val = (data_bit_len - 1) << SIRFSOC_USP_TX_DATA_LEN_OFFSET; + len_val |= (data_bit_len + 1 + stop_bit_len - 1) << + SIRFSOC_USP_TX_FRAME_LEN_OFFSET; + len_val |= ((data_bit_len - 1) << + SIRFSOC_USP_TX_SHIFTER_LEN_OFFSET); + len_val |= (((clk_div_reg & 0xc00) >> 10) << + SIRFSOC_USP_TX_CLK_DIVISOR_OFFSET); wr_regl(port, ureg->sirfsoc_tx_frame_ctrl, len_val); /*rx frame ctrl*/ - len_val = (data_bit_len - 1) << 0; - len_val |= (data_bit_len + 1 + stop_bit_len - 1) << 8; - len_val |= (data_bit_len - 1) << 16; - len_val |= (((clk_div_reg & 0xf000) >> 12) << 24); + len_val = (data_bit_len - 1) << SIRFSOC_USP_RX_DATA_LEN_OFFSET; + len_val |= (data_bit_len + 1 + stop_bit_len - 1) << + SIRFSOC_USP_RX_FRAME_LEN_OFFSET; + len_val |= (data_bit_len - 1) << + SIRFSOC_USP_RX_SHIFTER_LEN_OFFSET; + len_val |= (((clk_div_reg & 0xf000) >> 12) << + SIRFSOC_USP_RX_CLK_DIVISOR_OFFSET); wr_regl(port, ureg->sirfsoc_rx_frame_ctrl, len_val); /*async param*/ wr_regl(port, ureg->sirfsoc_async_param_reg, (SIRFUART_RECV_TIMEOUT(port, rx_time_out)) | - (sample_div_reg & 0x3f) << 16); + (sample_div_reg & SIRFSOC_USP_ASYNC_DIV2_MASK) << + SIRFSOC_USP_ASYNC_DIV2_OFFSET); } if (IS_DMA_CHAN_VALID(sirfport->tx_dma_no)) wr_regl(port, ureg->sirfsoc_tx_dma_io_ctrl, SIRFUART_DMA_MODE); |