diff options
Diffstat (limited to 'drivers/tty/serial/sh-sci.h')
-rw-r--r-- | drivers/tty/serial/sh-sci.h | 83 |
1 files changed, 76 insertions, 7 deletions
diff --git a/drivers/tty/serial/sh-sci.h b/drivers/tty/serial/sh-sci.h index 350717404507..238ad0c5584b 100644 --- a/drivers/tty/serial/sh-sci.h +++ b/drivers/tty/serial/sh-sci.h @@ -2,6 +2,82 @@ #include <linux/io.h> #include <linux/gpio.h> +#define SCI_MAJOR 204 +#define SCI_MINOR_START 8 + + +/* + * SCI register subset common for all port types. + * Not all registers will exist on all parts. + */ +enum { + SCSMR, /* Serial Mode Register */ + SCBRR, /* Bit Rate Register */ + SCSCR, /* Serial Control Register */ + SCxSR, /* Serial Status Register */ + SCFCR, /* FIFO Control Register */ + SCFDR, /* FIFO Data Count Register */ + SCxTDR, /* Transmit (FIFO) Data Register */ + SCxRDR, /* Receive (FIFO) Data Register */ + SCLSR, /* Line Status Register */ + SCTFDR, /* Transmit FIFO Data Count Register */ + SCRFDR, /* Receive FIFO Data Count Register */ + SCSPTR, /* Serial Port Register */ + HSSRR, /* Sampling Rate Register */ + + SCIx_NR_REGS, +}; + + +/* SCSMR (Serial Mode Register) */ +#define SCSMR_CHR (1 << 6) /* 7-bit Character Length */ +#define SCSMR_PE (1 << 5) /* Parity Enable */ +#define SCSMR_ODD (1 << 4) /* Odd Parity */ +#define SCSMR_STOP (1 << 3) /* Stop Bit Length */ +#define SCSMR_CKS 0x0003 /* Clock Select */ + +/* Serial Control Register, SCIFA/SCIFB only bits */ +#define SCSCR_TDRQE (1 << 15) /* Tx Data Transfer Request Enable */ +#define SCSCR_RDRQE (1 << 14) /* Rx Data Transfer Request Enable */ + +/* SCxSR (Serial Status Register) on SCI */ +#define SCI_TDRE 0x80 /* Transmit Data Register Empty */ +#define SCI_RDRF 0x40 /* Receive Data Register Full */ +#define SCI_ORER 0x20 /* Overrun Error */ +#define SCI_FER 0x10 /* Framing Error */ +#define SCI_PER 0x08 /* Parity Error */ +#define SCI_TEND 0x04 /* Transmit End */ + +#define SCI_DEFAULT_ERROR_MASK (SCI_PER | SCI_FER) + +/* SCxSR (Serial Status Register) on SCIF, HSCIF */ +#define SCIF_ER 0x0080 /* Receive Error */ +#define SCIF_TEND 0x0040 /* Transmission End */ +#define SCIF_TDFE 0x0020 /* Transmit FIFO Data Empty */ +#define SCIF_BRK 0x0010 /* Break Detect */ +#define SCIF_FER 0x0008 /* Framing Error */ +#define SCIF_PER 0x0004 /* Parity Error */ +#define SCIF_RDF 0x0002 /* Receive FIFO Data Full */ +#define SCIF_DR 0x0001 /* Receive Data Ready */ + +#define SCIF_DEFAULT_ERROR_MASK (SCIF_PER | SCIF_FER | SCIF_ER | SCIF_BRK) + +/* SCFCR (FIFO Control Register) */ +#define SCFCR_MCE 0x0008 +#define SCFCR_TFRST 0x0004 +#define SCFCR_RFRST 0x0002 +#define SCFCR_LOOP (1 << 0) /* Loopback Test */ + +/* SCSPTR (Serial Port Register), optional */ +#define SCSPTR_RTSIO (1 << 7) /* Serial Port RTS Pin Input/Output */ +#define SCSPTR_CTSIO (1 << 5) /* Serial Port CTS Pin Input/Output */ +#define SCSPTR_SPB2IO (1 << 1) /* Serial Port Break Input/Output */ +#define SCSPTR_SPB2DT (1 << 0) /* Serial Port Break Data */ + +/* HSSRR HSCIF */ +#define HSCIF_SRE 0x8000 /* Sampling Rate Register Enable */ + + #define SCxSR_TEND(port) (((port)->type == PORT_SCI) ? SCI_TEND : SCIF_TEND) #define SCxSR_RDxF(port) (((port)->type == PORT_SCI) ? SCI_RDRF : SCIF_RDF) #define SCxSR_TDxE(port) (((port)->type == PORT_SCI) ? SCI_TDRE : SCIF_TDFE) @@ -28,10 +104,3 @@ # define SCxSR_BREAK_CLEAR(port) (((port)->type == PORT_SCI) ? 0xc4 : 0x00e3) #endif -/* SCFCR */ -#define SCFCR_RFRST 0x0002 -#define SCFCR_TFRST 0x0004 -#define SCFCR_MCE 0x0008 - -#define SCI_MAJOR 204 -#define SCI_MINOR_START 8 |