1 files changed, 233 insertions, 18 deletions

diff --git a/drivers/tty/serial/mxs-auart.c b/drivers/tty/serial/mxs-auart.c
index 10c29334fe2f..ec553f8eb218 100644
--- a/drivers/tty/serial/mxs-auart.c
+++ b/drivers/tty/serial/mxs-auart.c
@@ -14,6 +14,10 @@
  * http://www.gnu.org/copyleft/gpl.html
  */
 
+#if defined(CONFIG_SERIAL_MXS_AUART_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
+#define SUPPORT_SYSRQ
+#endif
+
 #include <linux/kernel.h>
 #include <linux/errno.h>
 #include <linux/init.h>
@@ -38,6 +42,12 @@
 
 #include <asm/cacheflush.h>
 
+#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
+#include <linux/err.h>
+#include <linux/irq.h>
+#include "serial_mctrl_gpio.h"
+
 #define MXS_AUART_PORTS 5
 #define MXS_AUART_FIFO_SIZE		16
 
@@ -139,7 +149,7 @@ struct mxs_auart_port {
 #define MXS_AUART_DMA_RX_READY	3  /* bit 3 */
 #define MXS_AUART_RTSCTS	4  /* bit 4 */
 	unsigned long flags;
-	unsigned int ctrl;
+	unsigned int mctrl_prev;
 	enum mxs_auart_type devtype;
 
 	unsigned int irq;
@@ -155,6 +165,10 @@ struct mxs_auart_port {
 	struct scatterlist rx_sgl;
 	struct dma_chan	*rx_dma_chan;
 	void *rx_dma_buf;
+
+	struct mctrl_gpios	*gpios;
+	int			gpio_irq[UART_GPIO_MAX];
+	bool			ms_irq_enabled;
 };
 
 static struct platform_device_id mxs_auart_devtype[] = {
@@ -414,25 +428,102 @@ static void mxs_auart_set_mctrl(struct uart_port *u, unsigned mctrl)
 			ctrl |= AUART_CTRL2_RTS;
 	}
 
-	s->ctrl = mctrl;
 	writel(ctrl, u->membase + AUART_CTRL2);
+
+	mctrl_gpio_set(s->gpios, mctrl);
+}
+
+#define MCTRL_ANY_DELTA        (TIOCM_RI | TIOCM_DSR | TIOCM_CD | TIOCM_CTS)
+static u32 mxs_auart_modem_status(struct mxs_auart_port *s, u32 mctrl)
+{
+	u32 mctrl_diff;
+
+	mctrl_diff = mctrl ^ s->mctrl_prev;
+	s->mctrl_prev = mctrl;
+	if (mctrl_diff & MCTRL_ANY_DELTA && s->ms_irq_enabled &&
+						s->port.state != NULL) {
+		if (mctrl_diff & TIOCM_RI)
+			s->port.icount.rng++;
+		if (mctrl_diff & TIOCM_DSR)
+			s->port.icount.dsr++;
+		if (mctrl_diff & TIOCM_CD)
+			uart_handle_dcd_change(&s->port, mctrl & TIOCM_CD);
+		if (mctrl_diff & TIOCM_CTS)
+			uart_handle_cts_change(&s->port, mctrl & TIOCM_CTS);
+
+		wake_up_interruptible(&s->port.state->port.delta_msr_wait);
+	}
+	return mctrl;
 }
 
 static u32 mxs_auart_get_mctrl(struct uart_port *u)
 {
 	struct mxs_auart_port *s = to_auart_port(u);
 	u32 stat = readl(u->membase + AUART_STAT);
-	int ctrl2 = readl(u->membase + AUART_CTRL2);
-	u32 mctrl = s->ctrl;
+	u32 mctrl = 0;
 
-	mctrl &= ~TIOCM_CTS;
 	if (stat & AUART_STAT_CTS)
 		mctrl |= TIOCM_CTS;
 
-	if (ctrl2 & AUART_CTRL2_RTS)
-		mctrl |= TIOCM_RTS;
+	return mctrl_gpio_get(s->gpios, &mctrl);
+}
+
+/*
+ * Enable modem status interrupts
+ */
+static void mxs_auart_enable_ms(struct uart_port *port)
+{
+	struct mxs_auart_port *s = to_auart_port(port);
 
-	return mctrl;
+	/*
+	 * Interrupt should not be enabled twice
+	 */
+	if (s->ms_irq_enabled)
+		return;
+
+	s->ms_irq_enabled = true;
+
+	if (s->gpio_irq[UART_GPIO_CTS] >= 0)
+		enable_irq(s->gpio_irq[UART_GPIO_CTS]);
+	/* TODO: enable AUART_INTR_CTSMIEN otherwise */
+
+	if (s->gpio_irq[UART_GPIO_DSR] >= 0)
+		enable_irq(s->gpio_irq[UART_GPIO_DSR]);
+
+	if (s->gpio_irq[UART_GPIO_RI] >= 0)
+		enable_irq(s->gpio_irq[UART_GPIO_RI]);
+
+	if (s->gpio_irq[UART_GPIO_DCD] >= 0)
+		enable_irq(s->gpio_irq[UART_GPIO_DCD]);
+}
+
+/*
+ * Disable modem status interrupts
+ */
+static void mxs_auart_disable_ms(struct uart_port *port)
+{
+	struct mxs_auart_port *s = to_auart_port(port);
+
+	/*
+	 * Interrupt should not be disabled twice
+	 */
+	if (!s->ms_irq_enabled)
+		return;
+
+	s->ms_irq_enabled = false;
+
+	if (s->gpio_irq[UART_GPIO_CTS] >= 0)
+		disable_irq(s->gpio_irq[UART_GPIO_CTS]);
+	/* TODO: disable AUART_INTR_CTSMIEN otherwise */
+
+	if (s->gpio_irq[UART_GPIO_DSR] >= 0)
+		disable_irq(s->gpio_irq[UART_GPIO_DSR]);
+
+	if (s->gpio_irq[UART_GPIO_RI] >= 0)
+		disable_irq(s->gpio_irq[UART_GPIO_RI]);
+
+	if (s->gpio_irq[UART_GPIO_DCD] >= 0)
+		disable_irq(s->gpio_irq[UART_GPIO_DCD]);
 }
 
 static int mxs_auart_dma_prep_rx(struct mxs_auart_port *s);
@@ -560,6 +651,10 @@ err_out:
 
 }
 
+#define RTS_AT_AUART()	IS_ERR_OR_NULL(mctrl_gpio_to_gpiod(s->gpios,	\
+							UART_GPIO_RTS))
+#define CTS_AT_AUART()	IS_ERR_OR_NULL(mctrl_gpio_to_gpiod(s->gpios,	\
+							UART_GPIO_CTS))
 static void mxs_auart_settermios(struct uart_port *u,
 				 struct ktermios *termios,
 				 struct ktermios *old)
@@ -636,6 +731,7 @@ static void mxs_auart_settermios(struct uart_port *u,
 		ctrl |= AUART_LINECTRL_STP2;
 
 	/* figure out the hardware flow control settings */
+	ctrl2 &= ~(AUART_CTRL2_CTSEN | AUART_CTRL2_RTSEN);
 	if (cflag & CRTSCTS) {
 		/*
 		 * The DMA has a bug(see errata:2836) in mx23.
@@ -650,9 +746,11 @@ static void mxs_auart_settermios(struct uart_port *u,
 				ctrl2 |= AUART_CTRL2_TXDMAE | AUART_CTRL2_RXDMAE
 				       | AUART_CTRL2_DMAONERR;
 		}
-		ctrl2 |= AUART_CTRL2_CTSEN | AUART_CTRL2_RTSEN;
-	} else {
-		ctrl2 &= ~(AUART_CTRL2_CTSEN | AUART_CTRL2_RTSEN);
+		/* Even if RTS is GPIO line RTSEN can be enabled because
+		 * the pinctrl configuration decides about RTS pin function */
+		ctrl2 |= AUART_CTRL2_RTSEN;
+		if (CTS_AT_AUART())
+			ctrl2 |= AUART_CTRL2_CTSEN;
 	}
 
 	/* set baud rate */
@@ -678,12 +776,30 @@ static void mxs_auart_settermios(struct uart_port *u,
 			dev_err(s->dev, "We can not start up the DMA.\n");
 		}
 	}
+
+	/* CTS flow-control and modem-status interrupts */
+	if (UART_ENABLE_MS(u, termios->c_cflag))
+		mxs_auart_enable_ms(u);
+	else
+		mxs_auart_disable_ms(u);
+}
+
+static void mxs_auart_set_ldisc(struct uart_port *port,
+				struct ktermios *termios)
+{
+	if (termios->c_line == N_PPS) {
+		port->flags |= UPF_HARDPPS_CD;
+		mxs_auart_enable_ms(port);
+	} else {
+		port->flags &= ~UPF_HARDPPS_CD;
+	}
 }
 
 static irqreturn_t mxs_auart_irq_handle(int irq, void *context)
 {
 	u32 istat;
 	struct mxs_auart_port *s = context;
+	u32 mctrl_temp = s->mctrl_prev;
 	u32 stat = readl(s->port.membase + AUART_STAT);
 
 	istat = readl(s->port.membase + AUART_INTR);
@@ -695,8 +811,20 @@ static irqreturn_t mxs_auart_irq_handle(int irq, void *context)
 		| AUART_INTR_CTSMIS),
 			s->port.membase + AUART_INTR_CLR);
 
+	/*
+	 * Dealing with GPIO interrupt
+	 */
+	if (irq == s->gpio_irq[UART_GPIO_CTS] ||
+	    irq == s->gpio_irq[UART_GPIO_DCD] ||
+	    irq == s->gpio_irq[UART_GPIO_DSR] ||
+	    irq == s->gpio_irq[UART_GPIO_RI])
+		mxs_auart_modem_status(s,
+				mctrl_gpio_get(s->gpios, &mctrl_temp));
+
 	if (istat & AUART_INTR_CTSMIS) {
-		uart_handle_cts_change(&s->port, stat & AUART_STAT_CTS);
+		if (CTS_AT_AUART() && s->ms_irq_enabled)
+			uart_handle_cts_change(&s->port,
+					stat & AUART_STAT_CTS);
 		writel(AUART_INTR_CTSMIS,
 				s->port.membase + AUART_INTR_CLR);
 		istat &= ~AUART_INTR_CTSMIS;
@@ -757,6 +885,10 @@ static int mxs_auart_startup(struct uart_port *u)
 	 */
 	writel(AUART_LINECTRL_FEN, u->membase + AUART_LINECTRL_SET);
 
+	/* get initial status of modem lines */
+	mctrl_gpio_get(s->gpios, &s->mctrl_prev);
+
+	s->ms_irq_enabled = false;
 	return 0;
 }
 
@@ -764,6 +896,8 @@ static void mxs_auart_shutdown(struct uart_port *u)
 {
 	struct mxs_auart_port *s = to_auart_port(u);
 
+	mxs_auart_disable_ms(u);
+
 	if (auart_dma_enabled(s))
 		mxs_auart_dma_exit(s);
 
@@ -779,10 +913,11 @@ static void mxs_auart_shutdown(struct uart_port *u)
 
 static unsigned int mxs_auart_tx_empty(struct uart_port *u)
 {
-	if (readl(u->membase + AUART_STAT) & AUART_STAT_TXFE)
+	if ((readl(u->membase + AUART_STAT) &
+		 (AUART_STAT_TXFE | AUART_STAT_BUSY)) == AUART_STAT_TXFE)
 		return TIOCSER_TEMT;
-	else
-		return 0;
+
+	return 0;
 }
 
 static void mxs_auart_start_tx(struct uart_port *u)
@@ -820,12 +955,14 @@ static struct uart_ops mxs_auart_ops = {
 	.start_tx       = mxs_auart_start_tx,
 	.stop_tx	= mxs_auart_stop_tx,
 	.stop_rx	= mxs_auart_stop_rx,
+	.enable_ms      = mxs_auart_enable_ms,
 	.break_ctl      = mxs_auart_break_ctl,
 	.set_mctrl	= mxs_auart_set_mctrl,
 	.get_mctrl      = mxs_auart_get_mctrl,
 	.startup	= mxs_auart_startup,
 	.shutdown       = mxs_auart_shutdown,
 	.set_termios    = mxs_auart_settermios,
+	.set_ldisc      = mxs_auart_set_ldisc,
 	.type	   	= mxs_auart_type,
 	.release_port   = mxs_auart_release_port,
 	.request_port   = mxs_auart_request_port,
@@ -1020,6 +1157,71 @@ static int serial_mxs_probe_dt(struct mxs_auart_port *s,
 	return 0;
 }
 
+static bool mxs_auart_init_gpios(struct mxs_auart_port *s, struct device *dev)
+{
+	enum mctrl_gpio_idx i;
+	struct gpio_desc *gpiod;
+
+	s->gpios = mctrl_gpio_init(dev, 0);
+	if (IS_ERR_OR_NULL(s->gpios))
+		return false;
+
+	/* Block (enabled before) DMA option if RTS or CTS is GPIO line */
+	if (!RTS_AT_AUART() || !CTS_AT_AUART()) {
+		if (test_bit(MXS_AUART_RTSCTS, &s->flags))
+			dev_warn(dev,
+				 "DMA and flow control via gpio may cause some problems. DMA disabled!\n");
+		clear_bit(MXS_AUART_RTSCTS, &s->flags);
+	}
+
+	for (i = 0; i < UART_GPIO_MAX; i++) {
+		gpiod = mctrl_gpio_to_gpiod(s->gpios, i);
+		if (gpiod && (gpiod_get_direction(gpiod) == GPIOF_DIR_IN))
+			s->gpio_irq[i] = gpiod_to_irq(gpiod);
+		else
+			s->gpio_irq[i] = -EINVAL;
+	}
+
+	return true;
+}
+
+static void mxs_auart_free_gpio_irq(struct mxs_auart_port *s)
+{
+	enum mctrl_gpio_idx i;
+
+	for (i = 0; i < UART_GPIO_MAX; i++)
+		if (s->gpio_irq[i] >= 0)
+			free_irq(s->gpio_irq[i], s);
+}
+
+static int mxs_auart_request_gpio_irq(struct mxs_auart_port *s)
+{
+	int *irq = s->gpio_irq;
+	enum mctrl_gpio_idx i;
+	int err = 0;
+
+	for (i = 0; (i < UART_GPIO_MAX) && !err; i++) {
+		if (irq[i] < 0)
+			continue;
+
+		irq_set_status_flags(irq[i], IRQ_NOAUTOEN);
+		err = request_irq(irq[i], mxs_auart_irq_handle,
+				IRQ_TYPE_EDGE_BOTH, dev_name(s->dev), s);
+		if (err)
+			dev_err(s->dev, "%s - Can't get %d irq\n",
+				__func__, irq[i]);
+	}
+
+	/*
+	 * If something went wrong, rollback.
+	 */
+	while (err && (--i >= 0))
+		if (irq[i] >= 0)
+			free_irq(irq[i], s);
+
+	return err;
+}
+
 static int mxs_auart_probe(struct platform_device *pdev)
 {
 	const struct of_device_id *of_id =
@@ -1067,7 +1269,7 @@ static int mxs_auart_probe(struct platform_device *pdev)
 	s->port.type = PORT_IMX;
 	s->port.dev = s->dev = &pdev->dev;
 
-	s->ctrl = 0;
+	s->mctrl_prev = 0;
 
 	s->irq = platform_get_irq(pdev, 0);
 	s->port.irq = s->irq;
@@ -1077,13 +1279,24 @@ static int mxs_auart_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, s);
 
+	if (!mxs_auart_init_gpios(s, &pdev->dev))
+		dev_err(&pdev->dev,
+			"Failed to initialize GPIOs. The serial port may not work as expected\n");
+
+	/*
+	 * Get the GPIO lines IRQ
+	 */
+	ret = mxs_auart_request_gpio_irq(s);
+	if (ret)
+		goto out_free_irq;
+
 	auart_port[s->port.line] = s;
 
 	mxs_auart_reset(&s->port);
 
 	ret = uart_add_one_port(&auart_driver, &s->port);
 	if (ret)
-		goto out_free_irq;
+		goto out_free_gpio_irq;
 
 	version = readl(s->port.membase + AUART_VERSION);
 	dev_info(&pdev->dev, "Found APPUART %d.%d.%d\n",
@@ -1092,6 +1305,8 @@ static int mxs_auart_probe(struct platform_device *pdev)
 
 	return 0;
 
+out_free_gpio_irq:
+	mxs_auart_free_gpio_irq(s);
 out_free_irq:
 	auart_port[pdev->id] = NULL;
 	free_irq(s->irq, s);
@@ -1111,6 +1326,7 @@ static int mxs_auart_remove(struct platform_device *pdev)
 
 	auart_port[pdev->id] = NULL;
 
+	mxs_auart_free_gpio_irq(s);
 	clk_put(s->clk);
 	free_irq(s->irq, s);
 	kfree(s);
@@ -1123,7 +1339,6 @@ static struct platform_driver mxs_auart_driver = {
 	.remove = mxs_auart_remove,
 	.driver = {
 		.name = "mxs-auart",
-		.owner = THIS_MODULE,
 		.of_match_table = mxs_auart_dt_ids,
 	},
 };