diff options
Diffstat (limited to 'drivers/tty/serial/fsl_lpuart.c')
| -rw-r--r-- | drivers/tty/serial/fsl_lpuart.c | 33 |
1 files changed, 15 insertions, 18 deletions
diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c index f6c33cd228c8..67fa113f77d4 100644 --- a/drivers/tty/serial/fsl_lpuart.c +++ b/drivers/tty/serial/fsl_lpuart.c @@ -1284,17 +1284,12 @@ static inline int lpuart_start_rx_dma(struct lpuart_port *sport) struct dma_slave_config dma_rx_sconfig = {}; struct circ_buf *ring = &sport->rx_ring; int ret, nent; - int bits, baud; struct tty_port *port = &sport->port.state->port; struct tty_struct *tty = port->tty; struct ktermios *termios = &tty->termios; struct dma_chan *chan = sport->dma_rx_chan; - - baud = tty_get_baud_rate(tty); - - bits = (termios->c_cflag & CSIZE) == CS7 ? 9 : 10; - if (termios->c_cflag & PARENB) - bits++; + unsigned int bits = tty_get_frame_size(termios->c_cflag); + unsigned int baud = tty_get_baud_rate(tty); /* * Calculate length of one DMA buffer size to keep latency below @@ -1394,9 +1389,9 @@ static int lpuart_config_rs485(struct uart_port *port, struct ktermios *termios, * Note: UART is assumed to be active high. */ if (rs485->flags & SER_RS485_RTS_ON_SEND) - modem &= ~UARTMODEM_TXRTSPOL; - else if (rs485->flags & SER_RS485_RTS_AFTER_SEND) modem |= UARTMODEM_TXRTSPOL; + else if (rs485->flags & SER_RS485_RTS_AFTER_SEND) + modem &= ~UARTMODEM_TXRTSPOL; } writeb(modem, sport->port.membase + UARTMODEM); @@ -1776,6 +1771,7 @@ static void lpuart_dma_shutdown(struct lpuart_port *sport) if (sport->lpuart_dma_rx_use) { del_timer_sync(&sport->lpuart_timer); lpuart_dma_rx_free(&sport->port); + sport->lpuart_dma_rx_use = false; } if (sport->lpuart_dma_tx_use) { @@ -1784,6 +1780,7 @@ static void lpuart_dma_shutdown(struct lpuart_port *sport) sport->dma_tx_in_progress = false; dmaengine_terminate_all(sport->dma_tx_chan); } + sport->lpuart_dma_tx_use = false; } if (sport->dma_tx_chan) @@ -1833,7 +1830,7 @@ static void lpuart32_shutdown(struct uart_port *port) static void lpuart_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) + const struct ktermios *old) { struct lpuart_port *sport = container_of(port, struct lpuart_port, port); unsigned long flags; @@ -2073,7 +2070,7 @@ static void lpuart32_serial_setbrg(struct lpuart_port *sport, static void lpuart32_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) + const struct ktermios *old) { struct lpuart_port *sport = container_of(port, struct lpuart_port, port); unsigned long flags; @@ -2191,6 +2188,7 @@ lpuart32_set_termios(struct uart_port *port, struct ktermios *termios, uart_update_timeout(port, termios->c_cflag, baud); /* wait transmit engin complete */ + lpuart32_write(&sport->port, 0, UARTMODIR); lpuart32_wait_bit_set(&sport->port, UARTSTAT, UARTSTAT_TC); /* disable transmit and receive */ @@ -2723,9 +2721,6 @@ static int lpuart_probe(struct platform_device *pdev) lpuart_reg.cons = LPUART_CONSOLE; handler = lpuart_int; } - ret = uart_add_one_port(&lpuart_reg, &sport->port); - if (ret) - goto failed_attach_port; ret = lpuart_global_reset(sport); if (ret) @@ -2735,7 +2730,9 @@ static int lpuart_probe(struct platform_device *pdev) if (ret) goto failed_get_rs485; - uart_rs485_config(&sport->port); + ret = uart_add_one_port(&lpuart_reg, &sport->port); + if (ret) + goto failed_attach_port; ret = devm_request_irq(&pdev->dev, sport->port.irq, handler, 0, DRIVER_NAME, sport); @@ -2745,10 +2742,10 @@ static int lpuart_probe(struct platform_device *pdev) return 0; failed_irq_request: -failed_get_rs485: -failed_reset: uart_remove_one_port(&lpuart_reg, &sport->port); failed_attach_port: +failed_get_rs485: +failed_reset: lpuart_disable_clks(sport); return ret; } @@ -2798,7 +2795,7 @@ static int __maybe_unused lpuart_suspend(struct device *dev) * EDMA driver during suspend will forcefully release any * non-idle DMA channels. If port wakeup is enabled or if port * is console port or 'no_console_suspend' is set the Rx DMA - * cannot resume as as expected, hence gracefully release the + * cannot resume as expected, hence gracefully release the * Rx DMA path before suspend and start Rx DMA path on resume. */ if (irq_wake) { |