diff options
Diffstat (limited to 'drivers/thermal')
| -rw-r--r-- | drivers/thermal/ti-soc-thermal/Kconfig | 15 | ||||
| -rw-r--r-- | drivers/thermal/ti-soc-thermal/Makefile | 1 | ||||
| -rw-r--r-- | drivers/thermal/ti-soc-thermal/omap3-thermal-data.c | 103 | ||||
| -rw-r--r-- | drivers/thermal/ti-soc-thermal/ti-bandgap.c | 10 | ||||
| -rw-r--r-- | drivers/thermal/ti-soc-thermal/ti-bandgap.h | 9 |
5 files changed, 138 insertions, 0 deletions
diff --git a/drivers/thermal/ti-soc-thermal/Kconfig b/drivers/thermal/ti-soc-thermal/Kconfig index cb6686ff09ae..ea8283f08aa6 100644 --- a/drivers/thermal/ti-soc-thermal/Kconfig +++ b/drivers/thermal/ti-soc-thermal/Kconfig @@ -19,6 +19,21 @@ config TI_THERMAL This includes trip points definitions, extrapolation rules and CPU cooling device bindings. +config OMAP3_THERMAL + bool "Texas Instruments OMAP3 thermal support" + depends on TI_SOC_THERMAL + depends on ARCH_OMAP3 || COMPILE_TEST + help + If you say yes here you get thermal support for the Texas Instruments + OMAP3 SoC family. The current chips supported are: + - OMAP3430 + + OMAP3 chips normally don't need thermal management, and sensors in + this generation are not accurate, nor they are very close to + the important hotspots. + + Say 'N' here. + config OMAP4_THERMAL bool "Texas Instruments OMAP4 thermal support" depends on TI_SOC_THERMAL diff --git a/drivers/thermal/ti-soc-thermal/Makefile b/drivers/thermal/ti-soc-thermal/Makefile index 1226b2484e55..0f89bdf03790 100644 --- a/drivers/thermal/ti-soc-thermal/Makefile +++ b/drivers/thermal/ti-soc-thermal/Makefile @@ -2,5 +2,6 @@ obj-$(CONFIG_TI_SOC_THERMAL) += ti-soc-thermal.o ti-soc-thermal-y := ti-bandgap.o ti-soc-thermal-$(CONFIG_TI_THERMAL) += ti-thermal-common.o ti-soc-thermal-$(CONFIG_DRA752_THERMAL) += dra752-thermal-data.o +ti-soc-thermal-$(CONFIG_OMAP3_THERMAL) += omap3-thermal-data.o ti-soc-thermal-$(CONFIG_OMAP4_THERMAL) += omap4-thermal-data.o ti-soc-thermal-$(CONFIG_OMAP5_THERMAL) += omap5-thermal-data.o diff --git a/drivers/thermal/ti-soc-thermal/omap3-thermal-data.c b/drivers/thermal/ti-soc-thermal/omap3-thermal-data.c new file mode 100644 index 000000000000..8470225b8db5 --- /dev/null +++ b/drivers/thermal/ti-soc-thermal/omap3-thermal-data.c @@ -0,0 +1,103 @@ +/* + * OMAP3 thermal driver. + * + * Copyright (C) 2011-2012 Texas Instruments Inc. + * Copyright (C) 2014 Pavel Machek <pavel@ucw.cz> + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Note + * http://www.ti.com/lit/er/sprz278f/sprz278f.pdf "Advisory + * 3.1.1.186 MMC OCP Clock Not Gated When Thermal Sensor Is Used" + * + * Also TI says: + * Just be careful when you try to make thermal policy like decisions + * based on this sensor. Placement of the sensor w.r.t the actual logic + * generating heat has to be a factor as well. If you are just looking + * for an approximation temperature (thermometerish kind), you might be + * ok with this. I am not sure we'd find any TI data around this.. just a + * heads up. + */ + +#include "ti-thermal.h" +#include "ti-bandgap.h" + +/* + * OMAP34XX has one instance of thermal sensor for MPU + * need to describe the individual bit fields + */ +static struct temp_sensor_registers +omap34xx_mpu_temp_sensor_registers = { + .temp_sensor_ctrl = 0, + .bgap_soc_mask = BIT(8), + .bgap_eocz_mask = BIT(7), + .bgap_dtemp_mask = 0x7f, + + .bgap_mode_ctrl = 0, + .mode_ctrl_mask = BIT(9), +}; + +/* Thresholds and limits for OMAP34XX MPU temperature sensor */ +static struct temp_sensor_data omap34xx_mpu_temp_sensor_data = { + .min_freq = 32768, + .max_freq = 32768, + .max_temp = 125000, + .min_temp = -40000, + .hyst_val = 5000, +}; + +/* + * Temperature values in milli degree celsius + */ +static const int +omap34xx_adc_to_temp[128] = { + -40000, -40000, -40000, -40000, -40000, -39000, -38000, -36000, + -34000, -32000, -31000, -29000, -28000, -26000, -25000, -24000, + -22000, -21000, -19000, -18000, -17000, -15000, -14000, -12000, + -11000, -9000, -8000, -7000, -5000, -4000, -2000, -1000, 0000, + 1000, 3000, 4000, 5000, 7000, 8000, 10000, 11000, 13000, 14000, + 15000, 17000, 18000, 20000, 21000, 22000, 24000, 25000, 27000, + 28000, 30000, 31000, 32000, 34000, 35000, 37000, 38000, 39000, + 41000, 42000, 44000, 45000, 47000, 48000, 49000, 51000, 52000, + 53000, 55000, 56000, 58000, 59000, 60000, 62000, 63000, 65000, + 66000, 67000, 69000, 70000, 72000, 73000, 74000, 76000, 77000, + 79000, 80000, 81000, 83000, 84000, 85000, 87000, 88000, 89000, + 91000, 92000, 94000, 95000, 96000, 98000, 99000, 100000, + 102000, 103000, 105000, 106000, 107000, 109000, 110000, 111000, + 113000, 114000, 116000, 117000, 118000, 120000, 121000, 122000, + 124000, 124000, 125000, 125000, 125000, 125000, 125000 +}; + +/* OMAP34XX data */ +const struct ti_bandgap_data omap34xx_data = { + .features = TI_BANDGAP_FEATURE_CLK_CTRL | TI_BANDGAP_FEATURE_UNRELIABLE, + .fclock_name = "ts_fck", + .div_ck_name = "ts_fck", + .conv_table = omap34xx_adc_to_temp, + .adc_start_val = 0, + .adc_end_val = 127, + .expose_sensor = ti_thermal_expose_sensor, + .remove_sensor = ti_thermal_remove_sensor, + + .sensors = { + { + .registers = &omap34xx_mpu_temp_sensor_registers, + .ts_data = &omap34xx_mpu_temp_sensor_data, + .domain = "cpu", + .slope = 0, + .constant = 20000, + .slope_pcb = 0, + .constant_pcb = 20000, + .register_cooling = NULL, + .unregister_cooling = NULL, + }, + }, + .sensor_count = 1, +}; diff --git a/drivers/thermal/ti-soc-thermal/ti-bandgap.c b/drivers/thermal/ti-soc-thermal/ti-bandgap.c index 10c47c048f7a..9f9ed7297ca4 100644 --- a/drivers/thermal/ti-soc-thermal/ti-bandgap.c +++ b/drivers/thermal/ti-soc-thermal/ti-bandgap.c @@ -1274,6 +1274,10 @@ int ti_bandgap_probe(struct platform_device *pdev) } bgp->dev = &pdev->dev; + if (TI_BANDGAP_HAS(bgp, UNRELIABLE)) + dev_warn(&pdev->dev, + "This OMAP thermal sensor is unreliable. You've been warned\n"); + if (TI_BANDGAP_HAS(bgp, TSHUT)) { ret = ti_bandgap_tshut_init(bgp, pdev); if (ret) { @@ -1579,6 +1583,12 @@ static SIMPLE_DEV_PM_OPS(ti_bandgap_dev_pm_ops, ti_bandgap_suspend, #endif static const struct of_device_id of_ti_bandgap_match[] = { +#ifdef CONFIG_OMAP3_THERMAL + { + .compatible = "ti,omap34xx-bandgap", + .data = (void *)&omap34xx_data, + }, +#endif #ifdef CONFIG_OMAP4_THERMAL { .compatible = "ti,omap4430-bandgap", diff --git a/drivers/thermal/ti-soc-thermal/ti-bandgap.h b/drivers/thermal/ti-soc-thermal/ti-bandgap.h index 0c52f7afba00..045f6427018f 100644 --- a/drivers/thermal/ti-soc-thermal/ti-bandgap.h +++ b/drivers/thermal/ti-soc-thermal/ti-bandgap.h @@ -322,6 +322,8 @@ struct ti_temp_sensor { * has Errata 814 * TI_BANDGAP_FEATURE_ERRATA_813 - used to workaorund when the bandgap device * has Errata 813 + * TI_BANDGAP_FEATURE_UNRELIABLE - used when the sensor readings are too + * inaccurate. * TI_BANDGAP_HAS(b, f) - macro to check if a bandgap device is capable of a * specific feature (above) or not. Return non-zero, if yes. */ @@ -337,6 +339,7 @@ struct ti_temp_sensor { #define TI_BANDGAP_FEATURE_HISTORY_BUFFER BIT(9) #define TI_BANDGAP_FEATURE_ERRATA_814 BIT(10) #define TI_BANDGAP_FEATURE_ERRATA_813 BIT(11) +#define TI_BANDGAP_FEATURE_UNRELIABLE BIT(12) #define TI_BANDGAP_HAS(b, f) \ ((b)->conf->features & TI_BANDGAP_FEATURE_ ## f) @@ -390,6 +393,12 @@ int ti_bandgap_set_sensor_data(struct ti_bandgap *bgp, int id, void *data); void *ti_bandgap_get_sensor_data(struct ti_bandgap *bgp, int id); int ti_bandgap_get_trend(struct ti_bandgap *bgp, int id, int *trend); +#ifdef CONFIG_OMAP3_THERMAL +extern const struct ti_bandgap_data omap34xx_data; +#else +#define omap34xx_data NULL +#endif + #ifdef CONFIG_OMAP4_THERMAL extern const struct ti_bandgap_data omap4430_data; extern const struct ti_bandgap_data omap4460_data; |